Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
VM-1110xl
Balanced Audio Distributor
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast
range of problems that confront the video, audio, presentation, and
broadcasting professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups1 that are clearly
defined by function.
Thank you for purchasing your Kramer VM-1110xl Balanced Audio
Distributor.
This product is ideal for the following typical applications:
ñ
Audio duplication and production studios, delivering undiminished
quality duplicates
ñ
ñ
Recording studios
Broadcast studios for on-line signal distribution
Each package includes the following items:
ñ
ñ
ñ
VM-1110xl Balanced Audio Distributor
Power cord2
This user manual3
2
Getting Started
We recommend that you:
ñ
Unpack the equipment carefully and save the original box and
packaging materials for possible future shipment
ñ
ñ
Review the contents of this user manual
Use Kramer high-performance high-resolution cables4
1
GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products
2 We recommend that you use only the power cord supplied with this device
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
3
Overview
The VM-1110xl is a high performance balanced audio DA (distribution
amplifier) using XLR connectors. It can be configured as a mono (1:10 or
2x1:5) DA or as a stereo (1:5) DA.
The VM-1110xl features:
ñ
ñ
Front panel output level trimmer controls
Active Bi-FET amplifying circuitry that ensures hum-free, full-
bandwidth operation
ñ
A high-power discrete buffering system providing excellent
performance
To achieve the best performance:
ñ
Use only good quality connection cables1 to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
ñ
Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VM-1110xl away from moisture, excessive sunlight and dust
4
Your VM-1110xl Balanced Audio Distributor
Figure 1 and Table 1 define the VM-1110xl.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your VM-1110xl Balanced Audio Distributor
Figure 1: VM-1110xl Balanced Audio Distributor
KRAMER: SIMPLE CREATIVE TECHNOLOGY
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Your VM-1110xl Balanced Audio Distributor
Table 1: VM-1110xl Balanced Audio Distributor Features
#
Feature
Function
1
2
3
4
5
6
7
8
9
Power LED
1:10 / 2x1:5 Button
Lights when the unit is powered on
Pushing in selects 2x1:51, releasing selects 1:102
Adjusts3 the output signal level for OUTPUT B
Level B Trimmer
Level A Trimmer
Adjusts3 the output signal level for OUTPUT A
Connects to the source A
INPUT A XLR Female Connector
INPUT B XLR Female Connector
OUT A XLR Male Connector
OUT B XLR Male Connector
Power Connector with Fuse
Connects to the source B
Connects to the acceptor A (from 1 to 5)
Connects to the acceptor B (from 1 to 5)
AC connector enabling power supply to the unit
Illuminated switch for powering the unit
10 ON/OFF Switch
1 Splits inputs A and B to outputs 1A-5A and 1B-5B, respectively
2 Splits input A to all 10 outputs
3 Insert a screwdriver into the small hole and carefully rotate it, trimming the OUTPUT level
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the VM-1110xl in a Rack
5
Installing the VM-1110xl in a Rack
This section describes how to install the VM-1110xl in a rack.
Before Installing in a rack
How to Rack Mount
To rack-mount a machine:
Before installing in a rack, be sure that the environment is
within the recommended range:
Operating temperature range +5è to +45è C (41è to 113è F)
1. Attach both ear brackets to the
machine. To do so, remove the
screws from each side of the
machine (3 on each side), and
replace those screws through the
ear brackets.
Operating humidity range
Storage temperature range
Storage humidity range
10 to 90% RHL, non-condensing
-20è to +70è C (-4è to 158è F)
5 to 95% RHL, non-condensing
CAUTION!!
When installing on a 19" rack, avoid hazards by taking
care that:
1. It is located within the recommended environmental
conditions, as the operating ambient temperature of a
closed or multi unit rack assembly may exceed the
room ambient temperature.
2. Once rack mounted, enough air will still flow around
the machine.
2. Place the ears of the machine
against the rack rails, and insert the
proper screws (not provided)
through each of the four holes in the
rack ears.
3. The machine is placed straight in the correct
horizontal position.
Note that:
4. You do not overload the circuit(s). When connecting
the machine to the supply circuit, overloading the
circuits might have a detrimental effect on overcurrent
protection and supply wiring. Refer to the appropriate
nameplate ratings for information. For example, for
fuse replacement, see the value printed on the
product label.
5. The machine is earthed (grounded) in a reliable way
and is connected only to an electricity socket with
grounding. Pay particular attention to situations where
electricity is supplied indirectly (when the power cord
is not plugged directly into the socket in the wall), for
example, when using an extension cable or a power
strip, and that you use only the power cord that is
supplied with the machine.
ñ
ñ
ñ
In some models, the front panel
may feature built-in rack ears
Detachable rack ears can be
removed for desktop use
Always mount the machine in the
rack before you attach any cables
or connect the machine to the
power
ñ
If you are using a Kramer rack
adapter kit (for a machine that is not
19"), see the Rack Adapters user
manual for installation instructions
(you can download it at:
http://www.kramerelectronics.com)
6
Connecting Your VM-1110xl
You can connect your VM-1110xl Balanced Audio Distributor in one of
three ways:
ñ
ñ
ñ
1:10 mono DA, see section 6.1
2x1:5 mono DA, see section 6.2
1:5 stereo DA, see section 6.3
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your VM-1110xl
6.1 Connecting a 1:10 Mono DA
To connect1 the VM-1110xl as a 1:10 mono DA, as the example in Figure 2
illustrates, do the following:
1. Connect one mono audio source (for example, a mono audio player) to
INPUT A on the rear panel.
2. Connect up to 10 audio acceptors2 to the OUT connectors on the rear panel.
3. On the front panel, release the 1:10 / 2x1:5 button.
4. Connect the power cord to the electricity supply.
5. Switch on the VM-1110xl.
The audio input is distributed to the audio outputs.
Figure 2: Connecting the VM-1110xl as a 1:10 Mono DA
1 Switch OFF the power on each device before connecting it to your VM-1110xl. After connecting your VM-1110xl, switch on
its power and then switch on the power on each device
2 Not all outputs have to be connected
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your VM-1110xl
6.2 Connecting a 2x1:5 Mono DA
To connect1 the VM-1110xl as a 2x1:5 mono DA, as the example in Figure
3 illustrates, do the following:
1. Connect mono audio source A (for example, a mono audio player) to
INPUT A on the rear panel.
2. Connect mono audio source B (for example, a mono audio player) to
INPUT B on the rear panel.
3. Connect up to 10 audio acceptors2 to the OUT connectors on the rear
panel. The A INPUT feeds to the A OUT connectors and the B INPUT
feeds to the B OUT connectors.
4. On the front panel, press IN the 1:10 / 2x1:5 button.
5. Connect the power cord to the electricity supply.
6. Switch on the VM-1110xl.
The audio input is distributed to the audio outputs.
Figure 3: Connecting the VM-1110xl as a 2x1:5 Mo
no DA
1 Switch OFF the power on each device before connecting it to your VM
its power and then switch on the power on each device
2 Not all outputs have to be connected
-1110xl. After connecting your VM-1110xl, switch on
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your VM-1110xl
6.3 Connecting a 1:5 Stereo DA
To connect1 the VM-1110xl as a 1:5 stereo DA, as the example in Figure 4
illustrates, do the following:
1. Connect one stereo audio source (for example, a stereo audio player) to
INPUT A (left channel) and INPUT B (right channel) on the rear panel.
2. Connect up to 5 audio acceptors2 to the OUT connectors (left channels to
OUT A and right channels to OUT B) on the rear panel.
3. On the front panel, press IN the 1:10 / 2x1:5 button.
4. Connect the power cord to the electricity supply.
5. Switch on the VM-1110xl.
The audio input is distributed to the audio outputs.
Figure 4: Connecting the VM-1110xl as a 1:5 Stereo DA
1 Switch OFF the power on each device before connecting it to your VM-1110xl. After connecting your VM-1110xl, switch on
its power and then switch on the power on each device. Not all outputs need to be connected
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
7
Technical Specifications
The VM-1110xl technical specifications are shown in Table 2:
Table 2: VM-1110xl Balanced Audio Distributor Technical Specifications1
INPUTS:
2 balanced audio +4dBu/50kΩ on XLR (F) connectors
OUTPUTS:
10 balanced audio +4dBu/50Ω on XLR (M) connectors
MAX. OUTPUT LEVEL:
BANDWIDTH (-3dB):
S/N RATIO:
23.8Vpp
>100kHz
89.3dB
CROSSTALK:
-78dB
CONTROLS:
COUPLING:
Level (x2): -0.7dB to +5.1dB, mode selector switches
AC (input); DC (output)
0.081%
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER SOURCE:
DIMENSIONS:
WEIGHT:
0.006%
230V AC, (115V AC U.S.A) 6VA
19" x 7" x 1U W, D, H, rack mountable
2.6kg (5.7lbs) approx
ACCESSORIES:
Power cord
1 Specifications are subject to change without notice
10
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the
followingterms.
HOW LONGIS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHATIS COVEREDANDWHATISNOTCOVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by thewarranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.
3. Damage, deteriorationor malfunctionresultingfrom:
i) Accident, misuse, abuse, neglect, fire, water, lightning orotheractsofnature
ii) Product modification, orfailureto followinstructions supplied with theproduct
iii) Repairorattemptedrepairby anyonenot authorizedbyKramer
iv) Anyshipment of theproduct(claims must bepresentedtothe carrier)
v) Removalorinstallationoftheproduct
vi) Anyothercause, whichdoes not relatetoaproduct defect
vii) Cartons, equipment enclosures, cables or accessoriesusedinconjunctionwiththeproduct
WHATWE WILLPAYFORAND WHATWE WILLNOTPAYFOR
Wewill pay labor and material expensesforcovereditems.Wewill notpayforthefollowing:
1. Removal or installationscharges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibilityof theKramerdealerfromwhomtheproduct was purchased.
3. Shippingcharges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OFIMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSIONOFDAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not beliable for:
1. Damage to other property caused by defects inthis product, damages baseduponinconvenience, loss ofuseof theproduct, loss
oftime, commercialloss; or:
2. Anyother damages, whether incidental, consequential or otherwise. Some countries maynot allow limitations onhow longan
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations andexclusions maynot applytoyou.
Thiswarranty gives youspecificlegalrights, andyou may alsohaveother rights, which varyfromplacetoplace.
NOTE:Allproducts returned to Kramer forservicemust havepriorapproval.Thismay be obtainedfromyourdealer.
Thisequipment has beentestedtodeterminecompliancewith therequirements of:
EN-50081:
"Electromagneticcompatibility(EMC);
genericemissionstandard.
Part 1: Residential, commercial andlightindustry"
"Electromagneticcompatibility(EMC)genericimmunitystandard.
Part 1: Residential, commercialandlightindustryenvironment".
FCC* Rules and Regulations:
EN-50082:
CFR-47:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
UsethesuppliedDCpower supplyto feed power to themachine.
Pleaseuserecommended interconnectioncablestoconnect themachinetoother components.
*FCCand CEapproved usingSTPcable(fortwisted pair products)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest information on our products and a list of Kramer
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
2900-001030
2
PN:
Rev:
Kramer Electronics, Ltd.
E-mail: [email protected]
P/N: 2900-001030 REV 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|