User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSISTANCE AND SERVICE FOR
MUSICIANS
For repairs, contact your nearest Authorized
KORG Service Center. For more information on
KORG products, and to find software and acces-
sories for your piano, please contact your local
Authorized KORG distributor.
Unauthorized changes or modification to this sys-
tem can void the user’s authority to operate this
equipment.
DISCLAIMER
The information contained in this manual has
been carefully revised and checked through. Due
to our constant efforts to improve our products,
the specifications might differ to those in the man-
ual. Korg is not responsible for any eventual dif-
ferences found between the specifications and the
contents of the instruction manual - the specifica-
tions being subject to change without prior notice
KORG ON THE INTERNET
Home page Korg Inc.: “http://www.korg.co.jp”
Home page Korg USA: “http://www.korg.com”
Home page Korg Italy: “http://www.korgpa.com”
WARRANTY
DATA RESET
KORG products are manufactured according to
the strictest electrical and mechanical regulations
that exist in various countries of the world. These
products are warranted by the KORG distributor
only in each country. Any KORG product that is
not sold with the manufacturer’s or distributor’s
warranty, or without a serial number, cannot bene-
fit from servicing under the warranty. This regula-
tion is for the consumer’s own protection.
When the instrument is turned off, all parameters
are reset.
© 2005 Korg Italy Spa. Printed in China.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Main features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting to an external amplification system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Using the headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Turning the instrument on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Turning the internal speakers on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Listening to the Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing a single sound (Single mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Playing two sounds at the same time (Layer mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Choosing the reverb and the chorus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
The damper pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
The metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Other functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Touch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Transpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Selecting a temperament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
What is MIDI? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
What can you do with MIDI? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Standard MIDI settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Selecting the transmission channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Using the SP-250 as a multitimbral tone generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Local On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Program Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Control Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
MIDI Data Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Assembling the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Cautions for assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Assembling procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Check after assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Polyphony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Control panel shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Control panel and keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
MIDI Implementation Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
1
2
3
4
5
6
7
6
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Introduction
Main features
Wide range of sounds. Thirty different and expressive high-quality sounds,
including a Stereo Concert Grand Piano. You can use the Layer function to simulta-
neously play two sounds.
Effects. The SP-250 provides built-in digital effects that can simulate the natural
ambience of a concert hall (Reverb) and add richness to the sound (Chorus).
Damper pedal simulation. The Damper pedal on the SP-250 corresponds to the
Damper or Forte pedal of an acoustic piano. On an acoustic piano, when you press
this pedal, the pads (dampers) that stop the vibrations of the strings are lifted.
Metronome. The built-in metronome allows you to select the time signature,
tempo, and volume, and even use a bell sound as the accent.
Touch control. You can choose from three different settings to adjust how the
sound will respond to your keyboard playing dynamics.
Temperaments. In addition to the Equal temperament, the SP-250 allows you to
select two alternative classical temperaments (Kirnberger and Werckmeister) for
historically accurate performance of classical music. When selecting an acoustic
piano sound, the typical Stretched Tuning is automatically selected.
Adjustable pitch. The Transpose function lets you change the pitch of the piano,
and the Pitch Control function allows you to make fine tune adjustments.
MIDI capabilities. The SP-250 supports the MIDI protocol, the standard that
allows music data to be transferred between musical instruments and computers.
MIDI allows two or more devices to control or be controlled by each other, and also
allows you to use the SP-250 as a 16-part multitimbral tone generator.
Introduction
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Powerful integrated amplification. SP-250 includes
amplier, with two 10cm speakers in Bass Reflex box.
a
powerful, 11 Watt
Two sets of heaphones. You can connect two stereo headphones, to play with
your teacher or another musician.
8
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER
1
Panels
Front panel
1
1
2
3
4 56789
A B C
0
1
2
SPEAKERS: Listen to the piano sound from these powerful speakers. To turn them
off, insert a jack in one of the PHONES connectors.
PHONES connector: Connect one or two pairs of headphones to these jacks. The
integrated speakers will turn off.
3
4
POWER switch: On/off switch.
MASTER VOLUME slider: Adjusts the volume for the speakers, the Output and
the Phones connectors.
5
6
REVERB button: Turns the reverb on/off. This adds ambience to the sound.
CHORUS button: Turns the chorus on/off. This makes the sound richer.
Panels
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
TOUCH button: Lets you select the keyboard sensitivity.
TRANSPOSE/FUNCTION button: Multifunction button to be used in order to
modify the transpose and fine tuning functions, to program the MIDI parameters
and to carry on other adjustments.
Note: When the instrument is turned off, all parameters are reset.
9
0
BANK button: Selects one of the 3 available banks of sounds.
SOUND SELECTION buttons: Press a button to select a sound (Single mode).
You can press two buttons at the same time, to play two sounds at the same time on
the keyboard (Layer mode).
A
DEMO button: Turns the demo mode on/off, to listen to the demo songs. Select the
songs with the sound selection buttons (see above).
B
C
METRONOME button: Turns the metronome click on/off.
TEMPO slider: Adjusts the metronome tempo.
10
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
1
3
2
4
5
1
Music stand holes: Insert the music stand into these two holes. Please note that,
the first times you use the music stand, you will need to apply some force to insert or
remove it. Later, the rubbery plastic material of which the holes are made will adapt
to the music stand, making the operation easier to carry on.
2
3
DAMPER connector: Connect the supplied pedal to this connector.
MIDI (IN, OUT) connectors: Connectors that are used to connect other MIDI
devices (sequencer, keyboards, etc.). OUT: Data output (to be connected to the
MIDI IN connector of another MIDI device). IN: Data input (to be connected to the
MIDI OUT connector of another MIDI device).
4
5
OUTPUT (L/MONO, R) connectors: Audio outputs. Connect these connectors to
an external amplifying system. (With a hi-fi system use the AUX or TAPE connec-
tors, not the PHONO connector). To amplify the SP-250 in mono, connect the sin-
gle L/MONO connector. Use the MASTER VOLUME slider to set the output
volume.
AC ADAPTER connector: Connect the supplied AC/DC adapter to this connector.
Panels
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER
2
Before you begin
Connecting to an external amplification system
Use the OUTPUT connectors, if you like to connect your SP-250 to a high-quality
mixer, stereo hi-fi, or a couple of active monitors. When using a stereo hi-fi, connect
the OUTPUTs to the AUX or TAPE inputs (never use the PHONO inputs). For
mono amplification, connect only the L/MONO output.
AC adapter
Mini component/
stereo, etc.
Powered
(Power cable for AC adapter)
to an AC outlet
monitors, etc.
L/MONO
R
DC IN
12 V
AUX IN
Headphones
Using the headphones
For playing or practicing during night hours, or when you don’t want to be heard by
others in the same room, connect one or two pairs of high-quality headphones (32Ω
impedance suggested) to the appropriate PHONES connectors. These connectors
are standard 1/4” phone jacks. If your headphones have a mini-jack adapter, grasp
the adapter when plugging in or out the headphones.
Warning: When using headphones, protect your hearing by avoiding extended lis-
tening at high volumes.
12
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the instrument on
Insert the DC plug of the supplied AC adapter into the DC inlet of the SP-250, then
connect the AC plug to a wall socket. You can use the dedicated hook to fix the
power cable to the piano’s back panel, as shown in the following illustration:
After having connected the power cable, press the POWER switch. When the instru-
ment is turned on, the LEDs on the control panel will light up. To turn the instru-
ment off, press the POWER switch again.
Note: When the instrument is turned off, all parameters are reset.
Turning the internal speakers on or off
Whether you prefer listening to the internal speakers or to an external amplification
system, you can turn the internal speakers on or off. Insert a jack (or connect a head-
phone set) to one of the PHONES connectors to turn the speakers off.
Adjusting the volume
Move the MASTER VOLUME slider towards the right to increase the volume;
towards the left to decrease the volume. The maximum is “10”; the minimum
(silence) is “0”. This control adjusts the output level of the headphones, the internal
speakers and of the OUTPUTs.
Note: It is always better to start with a low volume and then increase gradually.
Listening to the Demo
The SP-250 contains 30 pre-recorded demo songs. Listen to them to experience the
rich sound and expressive potential of this instrument.
Listen to all songs at once. You can listen to all demo songs with a single com-
mand.
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
13
1
2
Press the DEMO button (or keep the TRANSPOSE/FUNCTION button pressed,
and press E1 on the keyboard). The sound selection buttons LED will blink sequen-
tially from left to right. After a few seconds, playback will begin. All demo songs
will be played back. After the last song, the playback will begin again from the first
song.
During playback, you can press a sound selection button to repeat just the current
bank of ten demo songs. (There are three banks of ten demo songs each: 1-10, 11-
20, 21-30).
For example, if you press the CHOIR button while song number 1 is playing, song
number 10 will immediately start playing, and the playback will cycle from song 1
through song 10.
3
1
Press the DEMO button to stop the playback and exit the demo mode.
Listen to a specified song. You can select just one demo song to be played back.
First of all, you must select one of the three demo song banks.
•
•
•
To select the first bank (1-10), press the DEMO button once. The LEDs will
blink sequentially, from left to right.
To select the second bank (11-20), press the DEMO button a second time. All
LEDs will blink at the same time.
To select the third bank (21-30), press the DEMO button a third time. Adjacent
LEDs will blink alternatively
2
Press one of the sound selection buttons to select the corresponding song in the
selected bank. The LED on the selected demo button will stay on, while the other
LEDs will turn off.
After the end of the selected song, all the songs of the selected bank will be played
back in cycle.
Button
Bank 1 (1-10)
Bank 2 (11-20)
Bank 3 (21-30)
PIANO 1
F. Mendelssohn-Bar-
Korg Original (M. Tem-
C.A. Debussy:
Arabesque no.1
tholdy:Prelude Op.104a, pia): Reflection
no.2
PIANO 2
F. Chopin: Nocturne
Op.9, no.2
S. Joplin: The Enter-
tainer
J.S. Bach: Two-voice
invention no.13
E.PIANO 1 C.A. Debussy: Clair de
lune
Korg Original (M. Tem-
pia): Jumper
F. Chopin: Fantasie-
Impromptu Op.66
E.PIANO 2 Korg Original (M. Tem-
pia): Lullaby for a Little
Star
Korg Original (M. Tem-
pia): All the Ones You
Don’t Know
J.S. Bach: Prelude in C
major (from Das Wohl-
temeperierte Klavier)
14
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Bank 1 (1-10)
Bank 2 (11-20)
Bank 3 (21-30)
HARPSI
/CLAV
L. van Beethoven: Für
Elise
J.S. Bach: Italian Con-
cert
Korg Original (M. Tem-
pia): Rubber Bob
VIBES
/GUITAR
F. Chopin: Etude Op.10,
no.3
Korg Original (M. Tem-
pia): Jazz in Spain
R. Schumann: Trauma-
rei, Op.15, no.7
ORGAN 1 W.A. Mozart: A la turque Korg Original (M. Tem-
F. Mendelssohn-Bar-
tholdy: Spring Song,
Op.62, no.6
(from the Sonata in A-
major K.331)
pia): Cool “B”
ORGAN 2 F. Chopin: Valse no.6 in
F. Mendelssohn-Bar-
Korg Original (M. Tem-
pia): Sunflowers
Dꢀ-major Op.64, no.1
tholdy: Wedding March
STRINGS Korg Original (M. Tem-
J.S. Bach: Air on the G
string
P.D. Paradisi: Toccata in
A major
/PAD
pia): Old Feather Blues
CHOIR
Korg Original (M. Tem-
pia): Noise of time
Korg Original (M. Tem-
pia): Voice Texture
Korg Original (M. Tem-
pia): Wet Raccoon Rag
3
Press the DEMO button to stop the playback and exit the demo mode.
Note: During the demo playback you can’t use the sound selection buttons to select
sounds, or the REVERB and CHORUS buttons.
Adjusting the tempo of the demo songs. Use the TEMPO slider to change the
tempo of the selected demo song. Normally, the playback tempo of the demo song
will not match the markings of the TEMPO slider.
Note: You can’t use the metronome during the demo playback.
Note: When a demo is selected, its original tempo is recalled.
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
15
CHAPTER
3
Basic functions
Playing a single sound (Single mode)
You can select a sound from the thirty sounds supplied with the instrument.
1
2
Press one of the sound selection buttons in order to select a sound. The LED on the
button you pressed will light.
Use the BANK button to select one of the three available banks (1-10, 11-20, 21-
30). Pressed a first time it selects Bank 2; pressed a second time it selects Bank 3;
pressed a third time it selects Bank 1 again.
Button
Bank 1
#
Bank 2
#
Bank 3
#
PIANO 1
Grand Piano
Honky-Tonk
Club E.Piano
80's E. Piano
Harpsichord
2
2
2
2
1
1
2
3
2
1
Bright Piano
Detune Piano
Stage E.Piano
Digital E.Piano
Clav.
2
2
1
1
1
1
2
1
2
2
Mellow Piano
E.Grand Piano
Thin E.Piano
Vintage E. Piano
Wah Clav.
2
1
2
1
1
1
2
1
1
2
PIANO 2
E.PIANO 1
E.PIANO 2
HARPSI/CLAV
VIBES/GUITAR Vibraphone
Marimba
Acoustic Guitar
Jazz Organ 3
Church Organ 3
Strings
ORGAN 1
ORGAN 2
Jazz Organ 1
Jazz Organ 2
Church Organ 2
Warm Pad
Church Organ 1
STRINGS/PAD Slow Strings
CHOIR Choir Hoo
Choir Doo
Choir Pad
(#) These columns show the number of oscillators per voice used by each sound
Playing two sounds at the same time (Layer mode)
You can play two sounds at the same time on the keyboard. This is called the Layer
mode.
16
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When selecting the Layer mode, the total number of voices that can play at
the same time is reduced, depending on the total number of oscillators used by the
selected sounds.
Note: You can’t select two sounds included under the same button.
1
2
3
Press one of the sound selection buttons in order to select the first sound. The LED
on the button you pressed will light. Use the BANK button to select a sound in one
of the other banks.
Press another sound selection button to select the second sound. The LED on the
button you pressed will light. Use the BANK button to select a sound in one of the
other banks.
Note: Steps 1 and 2 are not required, if the right banks are already selected.
Returning to the Single mode. To return to the Single mode, just press a single
sound selection button.
Adjusting the volume of sounds in Layer mode. To adjust the balance bet-
ween the sounds in Layer mode, hold down the button of the sound whose level you
wish to decrease, and repeatedly press the button of the sound whose level you wish
to raise.
Note: This setting will be memorized even after turning the Layer mode off, but
the Data Dump function (see “MIDI Data Dump” on page 31).
Choosing the reverb and the chorus
The SP-250 has two effects: reverb and chorus. The reverb simulates the sound
reverberation in a room, while the chorus simulates a modulating effect that makes
the sounds richer. The effect settings will be remembered even when selecting a dif-
ferent sound.
Note: Effect settings made in Single mode are memorized even when selecting the
Layer mode, but no change made in Layer mode will be preserved.
When the instrument is turned on, the effect settings are reset to the factory settings.
To save the Single mode settings, save them using the Data Dump function (see
“MIDI Data Dump” on page 31).
Basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
17
1
Hold down the REVERB or CHORUS button, and press either the PIANO 1/L,
PIANO 2/M, or E.PIANO1/H sound selection button to select the reverb or chorus
depth.
Button
Reverb depth
Chorus depth
PIANO 1/L
PIANO 2/M
E.PIANO 1/H
Light reverb
Normal reverb
Deep reverb
Light chorus
Normal chorus
Deep chorus
2
3
To check the currently selected reverb or chorus depth, hold down the REVERB or
To turn the reverb or chorus off, press the REVERB or CHORUS button. The LED
on the button will turn off.
The damper pedal
The supplied pedal can be used as a damper pedal. You can also use the half-
pedalling, with a gradual resonance effect depending on the depth of the pedal pres-
sure.
In Layer mode, you can select the sound(s) to apply the pedal to.
Note: When the instrument is turned on, the pedal settings are reset. To save these
settings, save them using the Data Dump function (see “MIDI Data Dump” on
page 31).
1
2
Hold the TRANSPOSE/FUNCTION button, and press the damper pedal. Each time
you press the pedal, the LED on the sound selection button(s) where the damper
pedal is active will light.
When the pedal is assigned to the desired sound(s), release the TRANSPOSE/
FUNCTION button.
The metronome
The SP-250 incorporates a metronome, with which you can set the tempo during
practice.
Starting and stopping the metronome. Press the METRONOME button to
make the metronome start or stop. When turning on, the metronome is set according
to the slider position, but you can adjust it with the procedure described below. After
having listened to the demo, the tempo will be that of the last demo that had been
listened to.
18
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the metronome volume. While the metronome is playing, keep the
METRONOME button pressed and repeatedly press the STRINGS/PAD button (or
the B5 key) to lower the volume, or the CHOIR button (or the C6 key) to raise it. To
reset the volume, simultaneously press the STRINGS/PAD and CHOIR buttons (or
the B5 and C6 keys on the keyboard) while holding the METRONOME button.
Key
Effect
Key
Effect
B5
Lower volume
C6
Higher volume
Adjusting the tempo using the TEMPO slider. Use the TEMPO slider to adjust
the tempo. The range is ꢁ = 40 ~ 200.
Numeric tempo input. In some cases, you may require an exact tempo (like 127
BPM). It is possible to enter a precise tempo, using the numeric input.
1
2
Hold down the METRONOME button.
Use the keyboard to input the three-digit tempo value (insert a “0” before a two-
number value).
Key
Number
Key
Number
C5
0
2
4
6
8
C#5
D#5
F5
1
3
5
7
9
D5
E5
F#5
G#5
G5
A5
For example, to select a tempo value of 168, keep the METRONOME button
pressed, then press C#5 (1), F#5 (6), G#5 (8). To select a tempo value of 85, keep
the METRONOME button pressed, then press C5 (0), G#5 (8), F5 (5).
Basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Selecting the time signature. You can add an accent to the first beat of a mea-
sure.
Button
Time signature
PIANO 1
2 movements (2/4, 2/8...)
3 movements (3/4, 3/8...)
4 movements (4/4, 4/8...)
6 movements (6/4, 6/8...)
PIANO 2
E.PIANO 1
E.PIANO 2
1
2
While the metronome is working, keep the METRONOME button pressed and
press the button that corresponds to the time signature you wish to use (see table
above). The first movement of the measure will be accented.
To deactivate the accent, keep the METRONOME button pressed and press the
sound selection button whose LED is lit.
Note: When the instrument is turned on, the accent is automatically disabled.
Selecting a bell for the accent. The accented beat can be changed to a bell
sound.
1
2
While the metronome is playing, hold down the METRONOME button, then press
the VIBES/GUITAR sound selection button. The LED on the button will light, and a
bell sound will be heard on the first beat of the bar.
To return to the normal accent, hold down the METRONOME button and press the
HARPSI/CLAV sound selection button to switch on the LED on the HARPSI/
CLAV button.
Note: When the instrument is turned on, the bell is automatically disabled.
20
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER
4
Other functions
Touch settings
The keyboard sensitivity, or touch, can be programmed.
Keep the TOUCH button pressed, and press the appropriate
button to select one of the available touch settings.
Strong
ÿ
(
)
Light
Note
Standard
Heavy
loudness
Button
Touch sensitivity
Soft
ꢂ
(
)
Strong
Playing strength
Soft
PIANO 1/L
Light. Loud notes can be produced
even by playing lightly.
PIANO 2/M
Normal. Normal piano touch.
E.PIANO 1/H
Heavy. Loud notes can be pro-
duced only by playing very hard.
To check the currently selected setting, hold down the TOUCH button, and look at
which of the above LEDs is turned on.
Note: When the instrument is turned on, the touch setting is reset to Normal.
Alternatively, you can use the TRANSPOSE/FUNCTION button and the keyboard.
Hold the TRANSPOSE/FUNCTION button, and press the key on keyboard that
corresponds to the touch setting you wish to carry out (see table).
Key
Touch sensitivity
B3
C4
D4
Light. Loud notes can be produced even by playing lightly.
Normal. Normal piano touch.
Heavy. Loud notes can be produced only by playing very hard.
Other functions
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Transpose
In some cases, a song may be written in a difficult key (e.g., many black keys), or
you may wish to shift the pitch to match another instrument or vocalist. In such
cases, you can transpose (shift the pitch) so that you can use an easier fingering, or
use the same familiar fingering to play at a different pitch. This is called the Trans-
pose function.
For example if you transpose upward by one semitone, playing the notes shown at
the lower left will produce the pitches shown at the right.
Note: When the instrument is turned on, the transposing is reset.
1
Hold the TRANSPOSE/FUNCTION button, and press the key on keyboard that
corresponds to the transpose you wish to carry out (see table). The TRANSPOSE/
FUNTION LED will remain lit up, to indicate that the transpose function is active.
Key
Effect
F#6 — B6
C7
6 — 1 semitones below
Standard pitch
C#7 — F7
1 — 5 semitones higher
2
To get back to standard pitch, hold the TRANSPOSE/FUNCTION button and press
the C7 key. The TRANSPOSE/FUNCTION LED will turn off.
Fine tuning
In order to adapt the SP-250 pitch to that of another instrument, you can adjust the
pitch in steps of 0.5 Hz over a range of A4 = 427.5 ~ 452.5 Hz. The standard tuning
is A4 = 440 Hz.
Note: The pitch will go back to standard level (A4 = 440 Hz) when the instrument is
turned off, then on again.
22
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Hold the TRANSPOSE/FUNCTION button, and press the corresponding key to
change the pitch. Each time the B5 or C6 key is pressed, the pitch will be raised or
lowered by 0.5 Hz.
To get back to standard pitch, hold the TRANSPOSE/FUNCTION button and press
the B5 and C6 buttons at the same time.
Key
Fine tuning
B5
Lowers the pitch by 0.5 Hz
Standard pitch (A4 = 440 Hz)
Raises the pitch by 0.5 Hz
B5+C6
C6
Selecting a temperament
There are numerous classical compositions that were composed using tempera-
ments that differ from the “equal temperament” commonly used today.In order to
reproduce the original sound of such compositions, the SP-250 provides Kirnberger
and Werckmeister classical temperaments, in addition to the equal temperament,
allowing you to select from a total of three temperaments.
To select one of the available temperaments, hold down the TOUCH button, then
press the button corresponding to the desired temperament. To return to the equal
tuning hold down the TOUCH button, then press the sound selection button whose
LED is lit.
Button
Temperament
Both LEDs
turned off
Equal temperament. Nearly all keyboard instruments today use equal
temperament. This temperament spaces all semitones at equal dis-
tances, and allows identical scales to be played in any key.
HARPSI/CLAV
Werckmeister. This is the Werckmeister III scale invented by Andreas
Werckmeister, the German organist and music theoretician. This scale
was created in the later Baroque period to allow relatively free transposi-
tion.
VIBES/GUITAR
Kirnberger. This is the Kirnberger III scale invented by Johann Phillip
Kirnberger in the early 18th century, and is used mainly for tuning harpsi-
chords.
Other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
23
To check the currently selected temperament, hold down the TOUCH button, and
look at which of the above LEDs is turned on.
Note: When the power is turned on, the equal temperament will be automatically
selected.
About stretched tuning. In order to produce the most natural resonance, PIANO
1 and PIANO 2 sounds use a “stretched tuning” that makes the notes of the lower
range slightly flatter than equal temperament, and the upper range slightly sharper.
This is how an acoustic piano is normally tuned by professional tuners.
24
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER
5
MIDI
What is MIDI?
MIDI, is the abbreviation of Musical Instrument Digital Interface. It is an interna-
tional standard that was created to connect and transfer data between electronic
musical instruments, computers and other devices.
What can you do with MIDI?
Thanks to MIDI, you can use the SP-250 to control other instruments, use other
instruments to control the SP-250, and use a sequencer to create complex musical
pieces.
When you use the SP-250 keyboard or pedal, or select a sound, the notes, pedal acti-
vation and change in sound are transmitted to another instrument, or are recorded by
a sequencer.
Connections
Always connect the MIDI OUT connector of the instrument to the MIDI IN connec-
tor of another instrument. Never connect two connectors of the same instrument to
each other.
Connect the MIDI OUT connector of the transmitting (master) device to the MIDI
IN connector of the receiving (slave) device.
SP-250 rear panel
MIDI keyboard
MIDI OUT
MIDI IN
MIDI sound module
To connect the SP-250 to a computer, you need a MIDI interface for the computer,
sequencing or musical notation software, and two standard MIDI cables. Connect
MIDI
25
Download from Www.Somanuals.com. All Manuals Search And Download.
the SP-250 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the SP-250 MIDI IN connector to the MIDI OUT connector of the computer.
MIDI OUT
MIDI IN
MIDI IN
MIDI OUT
Standard MIDI settings
When turning the instrument on, the MIDI parameters of the SP-250 are pro-
grammed as follows:
Parameter
Setting
Transmission channel
Reception channel(s)
Local
1
All 16 (1-16)*
ON
Omni
OFF
(*) On channel 10, only metronome notes are received (D#5, E5).
Selecting the transmission channel
The standard MIDI has 16 separate channels available for transmission and recep-
tion of data. SP-250 always receives on all 16 channels, and transmits on a single
channel. To transmit data from the SP-250, you need to choose which of the 16
channels you wish to transmit data on.
26
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hold down the TRANSPOSE/FUNCTION button, and press the note in the range
C2–D#3 corresponding to the desired MIDI channel.
Key
Channel
Key
Channel
C2
1
C#2
D#2
F2
2
D2
3
4
E2
5
6
F#2
G#2
A#2
C3
7
G2
8
9
A2
10
12
14
16
11
13
15
B2
C#3
D#3
D3
Note: When the power is turned on, channel 1 will automatically be selected.
Note: By default, channel 10 will automatically be assigned to the metronome
sound (notes D#5-E5).
Note: In Layer mode, the second sound transmits on the following channel. For
will transmit on channel 16, while the second sound will transmit on channel 1
(cycling back to the first channel).
Using the SP-250 as a multitimbral tone generator
When SP-250 is controlled from an external MIDI device, it can work as a 16-part
multitimbral tone generator.You can select a different sound on each of the 16 MIDI
channels.
1
2
Use a MIDI cable to connect the SP-250's MIDI IN to the MIDI OUT of a
sequencer etc.
Transmit MIDI data from the connected sequencer (or other device). See “Program
Change” on page 28 for instructions on how to select a sound using the MIDI Pro-
gram Change message. Program Change reception must be activated on the SP-250
(it is by default).
MIDI
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Read the other devices user’s manual for details on sending Program Change mes-
sages.
Local On/Off
Local is the parameter that allows you to establish whether the keyboard has to play
the internal sounds and transmit MIDI data at the same time (Local On), or whether
it just has to transmit MIDI data and not play the internal sound (Local Off).
Local Off should be chosen when you wish to use the SP-250 as a mute keyboard,
to play another instrument. It should be chosen also when SP-250 is connected to a
sequencer via its MIDI IN and MIDI OUT connectors. This will avoid the notes to
be played twice, by the keyboard and by the sequencer, producing an annoying
“echo” effect.
Normally, you will choose Local On (automatically selected when turning the SP-
250 on), so that playing the keyboard will produce sound.
Hold down the TRANSPOSE/FUNCTION button, and press the PIANO 1 sound
selection button. The Local setting will alternate to On/Off each time you press this
button.
Local status
PIANO 1 LED status
Local On
Local Off
Lit
Dark
Note: When the power is turned on, the Local will be automatically set to On.
Program Change
The sound of the SP-250 can be selected via MIDI, by sending a Program Change
message on the channel where you wish to assign the sound. The table enlists the
Program Change numbers (numbering from 0-29; if the transmitting device uses
numbers from 1-30, you will need to increment the number by one).
Transmitting Program Change messages. You can send a MIDI Program
Change message to a MIDI device connected to the SP-250 MIDI OUT, to change
its sound. When selecting one of the internal sounds of the SP-250 by using the
sound selection buttons, a MIDI Program Change number will be transmitted, as
shown in the table below.
Receiving Program Change messages. When a Program Change message is
received from an external device, the corresponding internal sound will be selected
28
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
on the SP-250, as shown in the following table. Only Program Change (PC) num-
bers in the range 0–29 have effect on the SP-250, while other numbers (30-127) are
ignored.
PC# Button
Bank Sound
Grand Piano
0
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
PIANO 1
Bright Piano
Mellow Piano
Honky-Tonk
Detune Piano
E.Grand Piano
Club E.Piano
Stage E.Piano
Thin E.Piano
80's E.Piano
Digital E.Piano
Vintage E.Piano
Harpsichord
Clav.
2
3
4
PIANO 2
5
6
7
E.PIANO 1
E.PIANO 2
HARPSI/CLAV
VIBES/GUITAR
ORGAN1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Wah Clav.
Vibraphone
Marimba
Acoustic Guitar
Jazz Organ 1
Jazz Organ 2
Jazz Organ 3
Church Organ 1
Church Organ 2
Church Organ 3
Slow Strings
Warm Pad
ORGAN2
STRINGS/PAD
CHOIR
Strings
Choir Hoo
Choir Doo
Choir Pad
MIDI
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Change enable/disable. To transmit and receive this kind of data, you
must enable Program Change messages transmission and reception. Otherwise, you
can disable Program Changes data.
Hold down the TRANSPOSE/FUNCTION button, and press the PIANO 2 sound
selection button. Each time you press the switch, the setting will alternate between
Enabled and Disabled.
Program Change status
PIANO 2 LED status
Enable
Cancel
Lit
Dark
Note: When the power is turned on, program changes will be enabled for all MIDI
channels.
Control Change
When you operate the damper pedal, adjust the balance in Layer mode, or make
other adjustments on the control panel, a Control Change message is sent to a con-
nected external MIDI device. At the same time, SP-250 can receive a Control
Change message from an external MIDI device connected to its MIDI IN, to control
the damper pedal, volume adjustment, and other data.
Control Change enable/disable. To transmit and receive this kind of data, you
must enable Control Change messages transmission and reception. Otherwise, you
can disable Control Changes data.
Hold down the TRANSPOSE/FUNCTION button, and press the E.PIANO 1 sound
selection button. Each time you press this button, the setting will alternate between
Enabled and Disabled.
Control Change status
E.PIANO 1 LED status
Enabled
Disabled
Lit
Dark
Note: When the power is turned on, Control Change messages will be enabled on
all MIDI channels.
30
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI Data Dump
You can save the current sound settings (Single or Layer mode) on an external MIDI
storage device, like a sequencer or a MIDI data filer. You can later reload these data
into the SP-250, to restore a saved set of data.
Warning: To avoid loosing data, carefully read the owner's manual of your MIDI
data filer. Loading data into the memory of the SP-250 will erase all existing data.
Hint: To avoid any trouble, don’t forget to deactivate System Exclusive data recep-
tion on the connected device.
The following table shows which data are saved with the Data Dump.
Category
Data
Single mode
Layer mode
Reverb and chorus settings (on/off status, send level)
Balance between sounds, damper pedal on/off status
for each sound.
Saving data to the data filer. Here is how to save the data of the SP-250.
1
Use a MIDI cable to connect the SP-250 MIDI OUT to the MIDI IN of the data
filer.
2
3
Prepare the data filer to receive MIDI data.
On the SP-250, hold down the TRANSPOSE/FUNCTION button, and press the
VIBES/GUITAR sound selection button. The LEDs of the TRANSPOSE/FUNC-
TION and VIBES/GUITAR buttons will blink, indicating that the SP-250 is ready to
transmit the data dump.
4
Press the TOUCH button. The data dump will begin, and the sound setting data will
be transmitted to the data filer.
During a data dump operation, the SP-250 will not produce sound, and no other
function will work. When the data dump is completed, you will return to normal
playing condition.
You may cancel a data dump operation before the data dump begins, by pressing the
TRANSPOSE/FUNCTION or VIBES/GUITAR button.
Loading data from the data filer. You can load into the SP-250 data you previ-
ously saved on a data filer.
1
Use a MIDI cable to connect the MIDI IN of the SP-250 to the MIDI OUT of the
data filer.
MIDI
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
On the SP-250, hold down the TRANSPOSE/FUNCTION button and press the
VIBES/GUITAR sound selection button. The LEDs of the TRANSPOSE/FUNC-
TION and VIBES/GUITAR buttons will blink, and the SP-250 will wait to receive
the data dump.
Set the data filer to send the sound setting data that were previously saved from the
SP-250. Please read the data filer owner’s manual for details on data transmission.
The SP-250 will receive the data.
When the data dump is finished, the SP-250 will return to the same status it was
before the data dump.
During a data dump operation, the SP-250 will not produce sound, and no other
function will work.
You may cancel a data dump operation before the data dump begins, by pressing the
TRANSPOSE/FUNCTION or VIBES/GUITAR button.
32
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER
6
Assembling the stand
Cautions for assembly
•
When placing the piano on the stand, be careful not to pinch your hands.
•
Be sure that the correct parts are assembled in the correct orientation and position,
and follow the steps in order.
•
Do not apply weight to the front edge of the piano before tightening the screws, oth-
erwise the piano may fall down.
Assembling the stand
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Assembling procedure
1
Open the packing carton and take out the contents. Check that all of the following
items are available.
List of parts
A
B
C
D
E
F
a
Piano stand (includes parts A’ and A” – please refer to the next page)
× 1
× 1
× 1
× 1
× 1
× 1
× 2
× 2
× 2
× 4
Pedal “beam” (includes parts e – see page 36)
Pedal
Piano (main body)
Power supply
Power cable
Long screws M6×30
Short screws M6×20
Wing bolts M6×20
Washers
b
c
d
NB: You will need a cross-point (Phillips #2) screwdriver for assembly.
34
Chapter 6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Open the stand (A) by unfolding the legs (A’) and diagonal bars (A”), as shown in
the following illustration.
3
Use the two short screws (b) to fix the diagonal bars (A”). Be sure you insert a
washer (d) between the diagonal bar and the hole in the stand.
Assembling the stand
Download from Www.Somanuals.com. All Manuals Search And Download.
35
4
5
Prepare the pedal beam (B), by removing the two caps (e) from both sides.
Fit the pedal beam (B) and the legs (A’) together, with the curved part pointing
toward the back of the stand (as shown in the illustration). Fix them by using the
two long screws (a).
36
Chapter 6
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Lay the pedal (C) on the pedal bar (B).
7
Lift the piano (D) with two or more people, and fix it to the stand (A), so that the
carved, molded guides on the botton of the piano perfectly match the top of the
stand.
Assembling the stand
Download from Www.Somanuals.com. All Manuals Search And Download.
37
8
Fix the piano (D) to the stand (A) from below, by using the two wing bolts (c). Be
sure you insert a washer (d) between the stand’s bottom surface and each of the
wing bolts.
9
Assemble the power cord (F) to the separate power supply unit (E).
10 Connect the pedal and power cables to the corresponding piano connectors. Fix the
power supply cable with the dedicated cable-holder, as shown in the diagram.
38
Chapter 6
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Place the piano in the location where it will be played. Please be sure to place it over
a flat floor, to avoid any shaking.
Note: Be careful not to pinch the power cable under the piano feet.
12 Tighten and check all the screws.
Check after assembly
[•] Are any parts left over?
If any parts are left over, check the diagrams to see where they should be used.
[•] Make sure that all screws are tight.
Caution
Caution when transporting the instrument. Remove the piano from its stand, and
transport them separately. After transportation, refer to these instructions and re-
assemble the piano and stand.
Screw loosening. After assembly, the various screws and bolts of the stand may
loosen as time goes by, causing the stand to wobble. If this occurs, re-tighten the
screws.
Disassembly. If you need to packup the piano, reverse the assembly order by which
the piano was attached to the stand and the stand was assembled. After disassembly,
save the screws and other parts so that no parts are lost.
Assembling the stand
Download from Www.Somanuals.com. All Manuals Search And Download.
39
CHAPTER
7
Appendix
Troubleshooting
If during use any of the following problems should occur, carefully examine the
instrument to see if you can find out what the problem is, and try resolving it by fol-
lowing the suggestions below. If the instrument will still not function properly refer
to your dealer or to an Authorized Korg Service Center.
Problem
Possible remedy
Page
The instrument
will not turn on.
Check that the AC adapter is correctly connected to the piano and 11
the outlet.
No sound.
(1) Make sure that the volume is not set on 0. If it is, bring it up to 13
an adequate level.
(2) Make sure there is not a jack plugged into one of the PHONES 13
connectors. This would turn the internal speakers off. if so, unplug
the jack.
(3) Make sure that the MIDI Local function is not set on OFF. If it
is, set it to ON (or turn the instrument off and then on again).
28
Polyphony
The SP-250 contains sampled sounds, which have been recorded, analyzed and pro-
cessed from the actual sounds of the original musical instruments. These sounds
usually consist of one or more different samples reproduced by pressing a key. Each
sample is played back by a single oscillator. Sounds using just one oscillator have a
full polyphony of max. 60 voices, while sounds using two oscillators have a limited
polyphony of max. 30 notes. Sounds using more oscillators have a more limited
polyphony. When the number of notes exceeds the limit of the sound, some notes
will be stopped, so that the new ones can be heard.
40
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Furthermore, when playing in Layer mode with more than two notes, the max.
polyphony depends on how many oscillators are used in total. Using the REVERB,
CHORUS further reduces the polyphony, respectively, by 10 and 3 notes.
Please refer to the table on page 16 for more information about the number of oscil-
lators used by each sound.
Technical specifications
Specifications
SP-250
Keyboard
88 notes, velocity sensitive, with Korg RH3, Real Weighted Ham-
mer Action
Touch selection
Tuning
Light, Normal, Heavy
Transpose, Fine tuning, Temperament (Equal, Kirnberger, Werck-
meister)
Sound generation
Polyphony
Stereo PCM System
60 notes (max). The use of 2-oscillator sounds, the Layer mode
and/or the reverb or chorus reduces the maximum number of
simultaneous notes.
Sounds
Effects
30 sounds in ROM
Reverb, Chorus (3 levels each)
30 incorporated demos
Demo
Metronome
Pedal
Tempo, Time signature, Accent and Volume controls
Damper (included). Half-pedalling supported.
Connections
Audio output (OUTPUT L/MONO, R), 2 × Headphones, MIDI (IN,
OUT), Damper
Controls
Power switch, Master Volume, Reverb, Chorus, Touch, Transpose/
Function, Bank, Sound selectors, Tempo, Metronome, Demo
Amplification
Power supply
2 × 11 Watt amplifier, 2 × 10cm speakers in Bass Reflex box
External switching adapter, AC100~240V, 50/60Hz, to DC12V,
3.5A
Power consumption
42 Watt
Dimensions (W x D x H) 50.9 × 14.9 × 5.5 inch (1295 × 380 × 140 mm), excluding stand
and music stand
Weight
41.8 lbs (19 kg), excluding stand and music stand
AC adapter; Damper Pedal; Music stand, Piano stand
Included accessories
Sounds processed with INFINITY™.
Korg reserves the right to change the specifications without notice.
Appendix
41
Download from Www.Somanuals.com. All Manuals Search And Download.
KORG SP-250 Digital Piano
June 01, 2005
MIDI Implementation Chart
Function
Transmitted
Recognized
Remarks
Default
1
--
1-16
3
Basic
Channel
Changed
Default
1–16
Mode
Messages
Altered
X
X
******************
15–113
0–127
Note
Number:
True Voice
Note On
******************
21–108
O 9n, V=1–127
O 9n, V=1–127
Velocity
Note Off
X
X
X
Poly (Key)
Mono (Channel)
X
Aftertouch
Pitch Bend
X
X
X
O
7
O
O
Volume
*1
*1
11
X
O
Expression
Damper Pedal
Sostenuto
Control
Change
64
O
O
*1, *3
*1
66
X
O
67
X
O
Soft Pedal
*1, *3
*1
91
O
O
Reverb Depth
Chorus Depth
93
O
O
*1
120, 121
X
O
All Sound Off, Reset All Ctrls
*2
0–29
0–29
0–29
O
Program
Change
True #
******************
System Exclusive
O
X
X
X
X
X
X
O
O
X
Sound Data Dump
:Song Position
:Song Select
:Tune
X
System
X
Common
X
:Clock
X
System
Real Time
:Commands
:Local On/Off
:All Notes Off
:Active Sensing
:Reset
X
O
X
*4
Aux
Messages
O
X
*1: Transmitted/received when Control Changes are enabled
*2: Transmitted/received when Program Changes are enabled
*3: Half-pedal input/output value (0, 38, 74, 127)
Notes
*4: All Notes Off is transmitted when exing the Layer mode and when selecting the Local Off status.
Mode 1:OMNI ON, POLY
Mode 3:OMNI OFF, POLY
Mode 2:OMNI ON, MONO
Mode 4:OMNI OFF, MONO
O:Yes
X: No
172
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca re Ca rd
Ga ra n tie
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
✄
Download from Www.Somanuals.com. All Manuals Search And Download.
✄
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Address
KORG Italy SpA
Via Cagiata, 85
I-60027 Osimo (An)
Italy
Web Servers
© KORG Italy 2005. All rights reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
|