Download from Www.Somanuals.com. All Manuals Search And Download.
2001 by Konica Business Technologies, Inc.
MAINTENANCE AGREEMENT
The KONICA 7115/7118 Workgroup Document System will give you many years of trouble-
free service. To ensure high quality copying performance and to prevent premature wear and
failure of precision parts and components, schedule periodic cleaning and routine adjustments.
We recommend that you contact your service center to discuss the benefits and advantages of
Konica’s Customer Service Maintenance Agreement and to be shown how a maintenance plan
can be tailored to your individual copying needs.
NOTICE:
Konica Business Technologies, Inc. has made every effort to ensure that the information in this
manual is complete and accurate. However, constant efforts are also being made to improve
and update the product. Therefore, Konica Business Technologies, Inc. shall not be liable for
errors in this manual or for any consequential damages resulting from the use of this manual.
The information contained herein is subject to change without notice.
FEDERAL OR STATE STATUTES MAY PROHIBIT THE COPYING OF CERTAIN
DOCUMENTS OR INFORMATION, RESULTING IN FINES OR INPRISONMENT FOR
VIOLATORS.
MANUAL PART NUMBER:
OP-7115/7118-01
WEB SITE ADDRESS
http://www.konicabt.com
CORRESPONDENCE:
Correspondence regarding this manual may be mailed to the address shown below.
KONICA BUSINESS TECHNOLOGIES, INC.
CORPORATE PUBLICATIONS
500 DAY HILL ROAD
WINDSOR, CT 06095
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Energy Star
®
As an ENERGY STAR Partner, we have determined that this machine meets the ENERGY
®
STAR Guidelines for energy efficiency.
®
What is an ENERGY STAR Product?
®
An ENERGY STAR product has a special feature that allows it to automatically switch to a
®
“low-power mode” after a period of inactivity. An ENERGY STAR product uses energy more
efficiently, saves you money on utility bills and helps protect the environment.
Trademarks and Registered Trademarks
Fiery and the Fiery logo are registered trademarks of Electronics for Imaging, Inc.
All other product names mentioned are trademarks or registered trademarks of their respective
companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
Introduction
1.1
CAUTION........................................................................................................................ 1-4
USER INSTRUCTIONS FCC PART 15 - RADIO
Laser Safety.................................................................................................................... 1-7
Internal Laser Radiation.................................................................................................. 1-7
Ozone Release ............................................................................................................. 1-10
1.2
1.3
About the User’s Manual............................................................................................ 1-11
Explanation of Manual Conventions.............................................................................. 1-11
[ ] key............................................................................................................................. 1-11
Explanation of Basic Concepts and Symbols.......................................................... 1-11
“Width” and “Length” ..................................................................................................... 1-13
Paper Orientation.......................................................................................................... 1-13
2
2.1
Power source .................................................................................................................. 2-1
2.2
Operating Environment ................................................................................................... 2-3
Proper Use...................................................................................................................... 2-3
Care of Copier Supplies.................................................................................................. 2-4
2.3
Legal Restrictions on Copying .................................................................................... 2-5
3
Before Making Copies
3.1
3.2
3.3
Available Features ........................................................................................................ 3-1
Components and Their Functions............................................................................... 3-4
Parts Names and Their Functions............................................................................... 3-6
Copier.............................................................................................................................. 3-6
Konica 7115/7118
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Inside the Copier .............................................................................................................3-8
Options ............................................................................................................................3-9
3.4
3.5
Control Panel ...............................................................................................................3-12
Names of Control Panel Parts and Their Functions ......................................................3-12
Icons on the Control Panel ............................................................................................3-14
Turning ON and OFF and the Initial Mode.................................................................3-15
How to Turn the Copier ON/OFF...................................................................................3-15
When Copier is Turned ON ...........................................................................................3-15
Default Settings .............................................................................................................3-16
3.6
Useful Functions .........................................................................................................3-17
Panel Resetting .............................................................................................................3-17
Auto Panel Reset...........................................................................................................3-17
Power Saver..................................................................................................................3-18
Auto Shut-OFF ..............................................................................................................3-18
Auto Copy Start .............................................................................................................3-18
Interrupting Copy Jobs ..................................................................................................3-19
Auto Tray Switching.......................................................................................................3-19
Account Number............................................................................................................3-20
To enter an account number .........................................................................................3-20
Printing from the Personal Computer ............................................................................3-21
Sending and Receiving Faxes Using the Copier...........................................................3-21
3.7
Copy Paper...................................................................................................................3-22
Paper Specifications......................................................................................................3-22
4
4.1
Two Ways to Load the Original....................................................................................4-1
Specific Types of Originals..............................................................................................4-1
4.2
Precautions for Using the Automatic Document Feeder .................................................4-2
Mixed Originals................................................................................................................4-4
4.3
Place the Original on the Platen Glass........................................................................4-6
Precautions for Placing the Original on the Platen Glass................................................4-6
Highly Transparent Originals...........................................................................................4-8
Books...............................................................................................................................4-9
5
Making Copies
5.1
5.2
5.3
Copying ..........................................................................................................................5-1
Selecting the Paper .......................................................................................................5-3
Feeding Paper Manually ...............................................................................................5-5
Making Copies by Using the Bypass Tray.......................................................................5-6
5.4
Specifying the Zoom Ratio .........................................................................................5-11
Setting the Zoom Ratio..................................................................................................5-12
5.5
5.6
Adjusting the Image Density ......................................................................................5-16
Interrupting a Copy Job..............................................................................................5-18
ii
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
6
6.1
6.2
Sorting............................................................................................................................. 6-6
6.3
6.4
6.5
7
7.1
User’s Choice................................................................................................................ 7-2
Density Priority................................................................................................................ 7-6
Exposure Level Priority (Manual).................................................................................... 7-7
Book Binding Position..................................................................................................... 7-7
IMAGE SHIFT Width Adjust............................................................................................ 7-7
Erase Setting (Left, Upper, and Frame).......................................................................... 7-8
Auto Shut-OFF................................................................................................................ 7-8
Paper Auto Detection...................................................................................................... 7-9
Paper Size Detection ...................................................................................................... 7-9
7.2
7.3
7.4
7.5
Toner Replenisher (Auxiliary Toner Replenishing) ................................................. 7-13
Custom Size Input....................................................................................................... 7-14
Administrator Mode .................................................................................................... 7-16
Administrator Mode....................................................................................................... 7-16
Copy Track.................................................................................................................... 7-18
Disable Auto Shut OFF ................................................................................................. 7-26
7.6
Checking the Total Number of Copies/Prints Produced ......................................... 7-28
Konica 7115/7118
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
7.7
Storing a Job................................................................................................................7-30
8
8.1
8.2
Major Error Displays and Remedial Actions...............................................................8-1
When the Add Paper Indicator Lights .........................................................................8-4
Adding Paper...................................................................................................................8-4
8.3
8.4
When the Add Toner Indicator Lights .........................................................................8-8
When the Paper Misfeed Indicator Lights.................................................................8-11
Misfeed Indications and Misfeed Locations...................................................................8-11
Clearing a Paper Misfeed..............................................................................................8-12
9
9.1
9.2
When This Type of Copy is Produced.........................................................................9-1
When the Copier is not Operating Correctly...............................................................9-3
10 Appendix
10.1 Specifications ..............................................................................................................10-1
Copier Konica 7115/7118..............................................................................................10-1
Automatic Document Feeder DF-217............................................................................10-3
Paper Feed Cabinet PF-121..........................................................................................10-3
Shifting Unit IS-101........................................................................................................10-4
Job Tray IT-102 .............................................................................................................10-4
Multiple Bypass Tray MT-102........................................................................................10-4
10.2 Care of the Copier .......................................................................................................10-5
Cleaning ........................................................................................................................10-5
10.3 Function Combination Table......................................................................................10-6
Function Combination Table..........................................................................................10-6
Conditions for Combined Functions ..............................................................................10-6
10.4 List of Paper Sizes and Zoom Ratios ........................................................................10-7
Paper Sizes ...................................................................................................................10-7
Zoom Ratios(Original Size to Paper Size).....................................................................10-8
iv
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1
Introduction
Thank you for choosing a Konica 7115/7118.
This User’s Manual describes the functions, operating procedures, precautions, and basic
troubleshooting for the Konica 7115/7118 copier. Before using this copier, be sure to read the
User’s Manual thoroughly in order to ensure that you use the copier efficiently. After you have
gone through the manual, store it in the holder on the rear side of the copier and keep it handy
at all times.
Konica 7115/7118
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1.1
SAFETY INFORMATION
This section contains detailed instructions on the operation and maintenance of this machine.
To achieve optimum use of this device, all operators should carefully read and follow the instruc-
tions in this manual. Please keep this manual in a handy place near the machine.
Please read the next section before using this device. It contains important information related to user safety and
preventing equipment problems.
Make sure you observe all of the precautions listed in this manual.
*
Please note that some parts of the contents of this section may not correspond with the purchased product.
Warning and Precaution Symbols
Ignoring this warning could cause serious injury or even death.
WARNING:
CAUTION:
Ignoring this caution could cause injury or damage to property.
Meaning of Symbols
A triangle indicates a danger against which you should take precaution.
This symbol warns against possible electrical shock.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
1-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
WARNING
•
•
Do not modify this product: Fire, electrical shock, or breakdown could result. If the product employs
a laser, the laser beam source could cause blindness.
Do not attempt to remove the covers and panels which have been fixed to the product. Some prod-
ucts have a high-voltage part or a laser beam source inside that could cause an electrical shock
or blindness.
•
Use only the power cord supplied in the package. Failure to use this cord could result in fire or
electrical shock.
•
•
Use only the specified power source voltage. Failure to do so could result in fire or electrical shock.
Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power
outlet for more than the marked current value could result in fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand: An electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do so could result in fire or electrical
shock.
•
Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power
cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in fire or
breakdown.
Should any of these conditions be found, immediately turn OFF the power switch, unplug the
power cord from the power outlet, and then call your authorized service representative.
In principle, do not use an extension cord. Use of an extension cord could cause fire or electrical
shock. Contact your authorized service representative if an extension cord is required.
•
Do not place a flower vase or other container that contains water, or metal clips or other small metallic
objects on this product. Spilled water or metallic objects dropped inside the product could result in
fire, electrical shock, or break-down.
Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately
turn OFF the power switch, unplug the power cord from the power outlet, and then call your autho-
rized service representative.
•
If this product becomes inordinately hot or emits smoke, or emits an unusual odor or noise, imme-
diately turn OFF the power switch, unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, fire or electrical shock could result.
If this product has been dropped or its cover damaged, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your authorized service representative.
If you keep on using it as is, fire or electrical shock could result.
•
Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause
burns or other damage.
Connect the power cord only to an electrical outlet that is equipped with a grounding terminal.
Konica 7115/7118
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
CAUTION
•
•
Do not use flammable sprays, liquids, or gases near this product, as fire could result.
Do not leave a toner unit or drum unit in a place within easy reach of children.
Licking or ingesting any of these substances could injure your health.
Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the
product, resulting in a fire or malfunction.
Do not install this product at a site that is exposed to direct sunlight, or near an air conditioner or
heating apparatus. The resultant temperature changes inside the product could cause a malfunc-
tion, fire, or electrical shock.
•
•
•
•
•
•
Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table,
bath, or a humidifier. Fire, electrical shock, or breakdown could result.
Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration
and shock. It could drop or fall, causing personal injury or mechanical breakdown.
After installing this product, mount it on a secure base. If the unit moves or falls, it may cause per-
sonal injury.
Do not store toner units and PC drum units near a floppy disk or watch that are susceptible to mag-
netism. They could cause these products to malfunction.
The inside of this product has areas subject to high temperature, which may cause burns. When
checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations
(around the fusing unit, etc.) which are indicated by a “Caution! High Temperature!” warning label.
Do not place any objects around the power plug, as the power plug may be difficult to pull out if an
emergency occurs.
•
Always use this product in a well ventilated location. Operating the product in a poorly ventilated
room for an extended period of time could injure your health. Ventilate the room at regular inter-
vals.
•
•
Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to
do this could damage the cord or cable, resulting in fire, electrical shock, or breakdown.
When moving this product, always hold it by the locations specified in the user’s manual or other
documents. If the unit falls it may cause severe personal injury. The product may also be damaged
or malfunction.
•
•
Remove the power plug from the outlet at least twice a year and clean the area between the plug
terminals. Dust that accumulates between the plug terminals could cause a fire.
When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could
damage the cord, resulting in fire or electrical shock.
1-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Precautions for Routine Use
•
Do not store toner units, PC drum units, or other supplies and consumables in a place subject to
direct sunlight and high temperature or humidity, as poor image quality and malfunction could re-
sult.
•
•
•
Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight. If
the PC drum is exposed to intense light, poor image quality could result.
Do not unpack a toner unit or PC drum unit until the time of use. Do not leave an unpacked unit
standing. Install it immediately or poor image quality could result.
Do not keep toner units and PC drum units in an upright position or upside down, as poor image
quality could result.
•
•
Do not throw or drop a toner unit or PC drum unit, as poor image quality could result.
Do not use this product in an area where ammonia or other gases or chemicals are present. Failure
to do so may shorten the service life of the product, cause damage or decrease performance.
Do not use this product in an environment with a temperature outside the range specified in the
user’s manual, as breakdown or malfunction could result.
•
•
Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product, as mal-
function or fire could result.
Do not touch or scratch the surface of the toner unit developing roller or the PC drum, as poor image
quality could result.
Use the supplies and consumables recommended by the dealer. Use of any supply or consumable
not recommended could result in poor image quality or breakdown.
Konica 7115/7118
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
USER INSTRUCTIONS
FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the interference
at his own expense.
WARNING: The design and production of this unit conform to FCC regulations, and any
changes or modifications must be registered with the FCC and are subject to FCC control. Any
changes made by the purchaser or user without first contacting the manufacturer will be subject
to penalty under FCC regulations.
This device must be used with shielded interface (Parallel) cable and shielded network (10/
100BaseT) cable.
This use of non-shielded cables is likely to result in interference with radio communications and
is prohibited under FCC rules.
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE3) (For Canada
Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
1-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Laser Safety
This is a digital machine which operates using a laser. There is no possibility of danger from the
laser provided the machine is operated according to the instructions in this manual.
Since radiation emitted by the laser is completely confined within protective housing, the laser
beam cannot escape from the machine during any phase of user operation.
This machine is certified as a Class 1 laser product: This means the machine does not produce
hazardous laser radiation.
Internal Laser Radiation
Maximum Average Radiation Power: 26.4 µW at the laser aperture of the print head unit.
Wavelength: 770-795 nm
This product employs a Class 3b laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM.
Therefore, the print head unit should not be opened under any circumstances.
Print Head
Konica 7115/7118
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Laser Aperture of the
Print Head Unit
There is a laser aperture at the location shown above, which must, however, NEVER be viewed
directly by the user.
CDRH Regulation
This machine is certified as a Class 1 Laser product under Radiation Performance Standard
according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser
products marketed in the United States and is reported to the Center for Devices and
Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department
of Health and Human Services (DHHS). This means that the device does not produce
hazardous laser radiation.
The label shown on page 1-9 indicates compliance with the CDRH regulations and must be
attached to laser products marketed in the United States.
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the
wavelength is 770-795 nm.
1-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Ozone Release
NOTE
= Locate the Machine in a Well Ventilated Room =
A negligible amount of ozone is generated during normal operation of this machine. An un-
pleasant odor may, however, be created in poorly ventilated rooms during extensive machine
operations. For a comfortable, healthy, and safe operating environment, it is recommended
that the room is well ventilated.
REMARQUE
= Placer l’appareil dans une pièce largement ventilée =
Une quantité d'ozone négligable est dégagée pendant le fonctionnement de l’appareil quand
celui-ci est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans
les pièces dont l'aération est insuffisante et lorsque une utilisation prolongée de l’appareil est
effectuée. Pour avoir la certitude de travailler dans un environnement réunissant des condi-
tions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’ap-
pareil.
1-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1.2
About the User’s Manual
Explanation of Manual Conventions
The marks and text formats used in this manual are described below.
WARNING
Failure to observe instructions highlighted in this manner may result in critical or fatal
injuries.
➜
Observe all warnings in order to ensure safe use of the copier.
CAUTION
Failure to observe instructions highlighted in this manner may result in serious injuries
or property damage.
➜
Observe all cautions in order to ensure safe use of the copier.
Note
(* May also appear as “Important” or “Tip”)
Text highlighted in this manner contains useful information and tips to ensure safe use of
the copier and serve as supplementary information. It is recommended that you read all of
them.
1 The number 1 as formatted here indicates the first step of
a sequence of actions.
2 Subsequent numbers as formatted here indicate subse-
An illustration inserted here shows
what operations must be performed.
quent steps of a sequence of actions.
Text formatted in this style provides additional assist-
ance.
?
➜
Text formatted in this style describes the action that
will ensure the desired results are achieved.
[ ] key
The names of keys on the control panel are written as shown above.
Konica 7115/7118
1-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1.3
Explanation of Basic Concepts and Symbols
The use of words and symbols in this manual are explained below.
Paper Feeding
During printing, paper is supplied from the right side of the copier and fed into the Exit Tray on
top with the printed surface of the page facing down. The paper feed direction is shown by the
arrows in the diagram below.
1-12
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
“Width” and “Length”
Whenever paper dimensions are mentioned in this manual,
the first value always refers to the width of the paper (shown
as “A” in the illustration) and the second to the length (shown
as “B”).
A: Width
B: Length
Paper Orientation
Lengthwise (
)
If the width (A) of the paper is shorter than the length (B), the
paper has a vertical or portrait orientation, indicated by either
“L” or
.
Crosswise (
)
If the width (A) of the paper is longer than the length (B), the
paper has a horizontal or landscape orientation, indicated by
either “C” or
.
Konica 7115/7118
1-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1-14
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
2
2
Precautions
Observe the following precautions to keep the copier in the best possible conditions.
2.1
Installation Precautions
Installation site
To ensure utmost safety and prevent possible malfunctions, install the copier in a location that
meets the following requirements:
- A location away from curtains, etc. that may catch fire and burn easily
- A location that is not exposed to water or other liquids
- A location free from direct sunlight
- A location out of the direct airflow of an air conditioner or heater, and not exposed to ex-
tremely high or low temperatures
- A well-ventilated location
- A location that is not exposed to high humidity
- A location that is not extremely dusty
- A location not subjected to undue vibrations
- A stable and level location
- A location where ammonia or other organic gases are not generated
- A location that does not put the operator in the direct airflow of exhaust from the copier
- A location that is not near any kind of heating devices
Power source
The power source requirements are as follows.
G
Voltage Fluctuation: Within ±10%
G
Frequency Fluctuation: Within ±0.3Hz
Konica 7115/7118
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
2
Space Requirements
To ensure easy copier operation, supply replacement, and maintenance, adhere to the recom-
mended space requirements detailed below.
44.8 (1138)
Konica 7115
40.9 (1038)
3.9 (100)
43.7 (1109)
37.8 (959)
5.9
(150)
Unit: inch (mm)
3.9 (100)
44.8 (1138)
40.9 (1038)
Konica 7118
45.1 (1145)
39.2 (995)
5.9
(150)
Unit: inch (mm)
Note
Be sure to allow a clearance of 3.9 in. (100 mm) or more at the back of the copier for the
ventilation duct and 5.9 in. (150 mm) or more at the right of the copier for the removal of the
misfed papers.
2-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
2
2.2
Operation Precautions
Operating Environment
The environmental requirements for correct operation of the copier are as follows:
G
G
Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C)
within an hour
Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Proper Use
To ensure the optimum performance of the copier, follow the precautions listed below:
- Never place heavy objects on the Platen Glass or subject it to shocks.
- Never open any copier doors or turn OFF the copier while it is making copies/printing, as a
paper misfeed could result.
- Never bring any magnetized object near the copier.
- Never use flammable sprays or liquids near the copier.
- Always make sure that the power plug is completely plugged into the electrical output.
- Always make sure that the copier’s power plug is visible and not hidden by the copier.
- Always unplug the copier from the electrical outlet if the copier is not to be used for a long
period of time.
- Always provide good ventilation when making a large number of continuous copies/printed
pages.
CAUTION
A negligible amount of ozone is generated during normal operation of this copier. An
unpleasant odor may, however, be detected in poorly ventilated rooms during extensive
copier operations.
➜
For a comfortable operating environment, it is recommended that the room be well
ventilated.
Konica 7115/7118
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
2
CAUTION
The area around the Fusing Unit is extremely hot.
➜
To reduce the risk of burns, do not touch areas not specifically authorized in the manual. Be
especially careful not to touch parts marked with warning labels, and their surrounding
areas.
Transporting the Copier
If you need to transport the copier over a long distance, consult your authorized Konica Service
Representative.
Care of Copier Supplies
Use the following precautions when handling the copier supplies (toner, paper, etc.).
- Store the supplies in a location that meets the following requirements:
Free from direct sunlight
Away from any heating apparatus
Not subjected to high humidity
Not extremely dusty
- Paper that has been removed from its wrapper but not loaded in the copier should be stored
in a sealed plastic bag in a cool, dark place.
- Use only toner that has been manufactured specifically for this copier. Never use other
types of toner.
- Keep all supplies out of the reach of children.
CAUTION
Be careful not to spill toner inside the copier or get toner on your clothes or hands.
➜
If your hands become soiled with toner, immediately wash them with soap and water.
2-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
2
2.3
Legal Restrictions on Copying
Certain types of documents must not be copied with the purpose or intent to pass copies of such
documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible copying.
<Financial Instruments>
G
G
G
G
G
G
Personal checks
Travelers checks
Money orders
Certificates of deposit
Bonds or other certificates of indebtedness
Stock certificates
<Legal Documents>
G
G
G
G
G
G
G
G
Food stamps
Postage stamps (canceled or uncanceled)
Checks or drafts drawn by government agencies
Internal revenue stamps (canceled or uncanceled)
Passports
Immigration papers
Motor vehicle licenses and titles
House and property titles and deeds
<General>
G
Identification cards, badges, or insignias
Copyrighted works without permission of the copyright owner
G
You are prohibited under any circumstances to copy domestic or foreign currency. In addition,
you are prohibited to copy works of art without permission of the copyright owner.
When in doubt about the nature of a document, consult with legal counsel.
Konica 7115/7118
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
2
2-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3
Before Making Copies
3.1
Available Features
The main copy settings available with this copier are listed below. For details on their operation,
refer to the pages indicated.
Copies
G
1-sided copies (p.6-1)
G
2 in 1 copies (p.6-1)
G
4 in 1 copies (p.6-1)
G
Book Copy (p.6-2)
Konica 7115/7118
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Zoom Ratio
G
Output
G
Sort (p.6-6)
G
Group (p.6-8)
Note
The Sort and Group functions are available when the copier is equipped with an Automatic
Document Feeder, 16MB Memory for Copier or 32MB Memory for Copier, and Paper Feed
Cabinet or Multiple Bypass Tray.
3-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
Applications
3
G
G
G
G
Margin Erase (p.6-10)
Reverse Image (p.6-13)
X/Y Zoom (p.5-14)
Image Shift(p.6-14)
Mixed Orig. Detection
G
Mixed Originals (p.4-4)
Note
The Mixed Orig. Detection function is available when the copier is equipped with an
Automatic Document Feeder.
Konica 7115/7118
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3.2
Components and Their Functions
Copier
G
Konica 7115/7118
Original Cover Kit CV-117 (option)
G
Presses down on an original placed on the Platen Glass.
Standard on Konica 7115.
Automatic Document Feeder DF-217 (option)
G
Automatically feeds originals one page after another for
scanning and copying.
Paper Feed Cabinet PF-121 (option)
Capable of holding up to 250 sheets of paper.
G
Shifting Unit IS-101 (option)
Permits sorting or grouping of copies according to the particular finishing setting made.
Job Tray IT-102 (option)
G
G
Performs sorting and grouping of faxes, printed pages, and copies into the upper or lower
bin.
3-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Multiple Bypass MT-102 (option)
G
Up to 50 sheets of Paper can be loaded in the Bypass
Tray.
Fax Unit for Konica 7115/7118 FK-117 (option)
Permits fax transmission using this copier.
Printer Controller IP-413 (option)
G
G
A built-in type printer controller that allows the copier to be used as a printer with the copier
connected to a personal computer.
Network Interface Card KN-305 (option)
Allows the copier to be used as a network printer.
G
16MB Memory for Copier MU-409 (option)
32MB Memory for Copier MU-410 (option)
G
Expands the memory capacity of the copier (16MB, 32MB), thereby allowing image rotation
and 2 in 1 copying to be performed.
Konica 7115/7118
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
No.
1
Part Name
Copy Tray
Front Cover
1st Tray
Description
Holds copies fed out face down from the copier.
Open when replacing the Toner Bottle. (p.8-8)
2
3
Holds up to 250 sheets of paper and easily adjusts to different paper
sizes.
Special paper can be used. (p.3-22)
4
Manual Bypass Tray
Use for manual feeding of paper.
The paper is fed one sheet at a time.
Special paper can be used. (p.5-6)
5
Lock Relase Cover
Side Cover
Use to unlock the Side Cover.
6
Open to clear a misfed sheet of paper.
Use to turn the copier ON and OFF. (p.3-15)
Use to align the original. (p.4-7)
7
Power Switch
Original Scales
Original Cover
Platen Glass
8
9
Holds the original against the Platen Glass.
10
Place your original on this glass to allow the copier to scan it. The
original is to be placed face down. (p.4-6)
11
Control Panel
Use to start a copy cycle and make necessary settings. (p.3-12)
Konica 7115/7118
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Inside the Copier
3
2
1
No.
Part Name
Description
1
Imaging Unit
Forms a copy image.
The Imaging Unit is to be replaced only by your authorized Konica
Service Representative.
2
3
Toner Bottle Holder
Pressure Lever
Open to replace the Toner Bottle.
Use to clear a misfed sheet of paper at the Fusing Unit. (p.8-12)
3-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Options
3
2
4
1
5
6
Automatic Document Feeder
No.
1
Part Name
Description
Document Exit Tray
Document Guide Plate
Receives originals which have been scanned by the copier.
Slide the guide plate to the size of the originals. (p.4-3)
Open when clearing an original that has been misfed. (p.8-18)
2
3
Document Feeder Cover (Doc.
Feed Cover)
4
Document Feeder Tray
Load the originals to be copied face up on this tray. (p.4-3)
Multiple Bypass Tray
No.
Part Name
Description
5
Bypass Tray
Up to 50 sheets of plain paper or 20 sheets of special paper can be
loaded on this tray. (p.8-7)
6
Bypass Tray Extender
Slide this Bypass Tray Extender out to load paper of a large size.
Konica 7115/7118
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
7
8
9
10
11
Paper Feed Cabinet
No.
7
Part Name
Description
2nd Tray
3rd Tray
4thTray
Up to 250 sheets of plain paper can be loaded. (p.8-6)
Konica 7118 accepts a Paper Feed Cabinet of four trays.
Konica 7115 accepts a Paper Feed Cabinet of one tray.
8
9
10
11
5thTray
Side Cover
Open to clear a misfed sheet of paper. (p.8-15)
3-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
When Job Tray is Mounted
13
12
14
15
Shifting Unit
No.
Part Name
Description
12
Copy Tray
Receives copy sets sorted.
Job Tray
No.
13
Part Name
Description
Copy Tray Indicator
Upper Copy Tray
Lights up when paper is fed into the Upper Copy Tray.
14
Receives printed pages produced via the personal computer or
faxes received.
15
Lower Copy Tray
Receives copies made.
Konica 7115/7118
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3.4
Control Panel
Names of Control Panel Parts and Their Functions
1
2
3
4
5
6
10
11
9
8
7
15
18
16
13 14
12
17
21
22
26
27
25
24
20
19 23
No.
Part Name
Description
1
PRINT
•
Lit while data received from personal computer is being printed.
Blinks while data is being transferred.
For details, refer to the Printer Controller User’s Manual.
2
JOB STORE
COUNTER
•
Press to select the Job Input mode. Two different jobs can be
programmed.
3
4
•
•
Press to display the Total Counter or Size Counter value.
REVERSE IMAGE
Press to copy an original with the original tonal arrangements
reversed.
5
ORIGINAL
•
•
•
•
•
•
Press to select the Mixed Original or Book copy function.
Press to select the 2 in 1 or 4 in 1 function.
Press to select the erase position.
6
COMBINATION
MARGIN ERASE
OUTPUT
7
8
Press to select the finishing function.
9
IMAGE SHIFT
X/Y ZOOM
Press to select the Image Shift mode.
10
Press to make a copy with different zoom ratios set for X
(horizontal) and Y (vertical) directions.
3-12
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
No.
Part Name
Description
11
JOB RECALL
•
Press to recall either one of the two jobs previously stored in
memory.
12
13
BYPASS TRAY SIZE SELECT
ZOOM
•
•
Press to select the size of the paper loaded in the Bypass Tray.
Press to change the zoom ratio in the range between 50% and
200% in 1% increments.
•
•
•
What is shown on the Display changes from the number of copies
to be made to the zoom ratio.
14
15
16
DISPLAY
KEYPAD
ID
Shows the number of copies to be made, the zoom ratio, and
other setting data.
Use to type in the number of copies to be made and any other
numeric data.
•
•
Press when entering an account number.
Becomes valid only when Copy Track has been set.
17
18
19
POWER SAVE
INTERRUPT
AUTO RESET
•
•
Press to set the copier into the Power Saver mode.
Press to interrupt a copy job.
•
•
Press to reset all copy functions and settings to their defaults.
Holding down the key for 3 seconds or more will set the copier
into the Utility mode.
20
21
CLEAR
STOP
•
Press to reset the number of copies to “1.”
•
•
Press to stop a print cycle.
Press to stop a scanning sequence.
22
START
•
•
•
•
Press to start a scanning sequence.
Press to start a print cycle.
Press to validate the setting just made.
The key lights up green when the copier is ready to make copies,
orange when it is not ready to make copies.
23
24
ENTER
RE
•
•
Press to validate the setting just made.
Press to select a zoom ratio from among those fixed ratios
available as standard.
25
26
27
APS/AMS
SIZE
•
•
•
Press to select either Auto Paper or Auto Size.
Press to select the paper size.
DENSITY SET
Press to adjust the image density of the copy.
Konica 7115/7118
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Icons on the Control Panel
Icon
Name
Description
Paper Misfeed Indicator
Malfunction Indicator
Lights up when a paper misfeed occurs in the copier.
Lights up when a malfunction occurs in the copier.
Maintenance Indicator
Add Paper Indicator
Add Toner Indicator
Blinks or lights up when the time approaches that copier
needs maintenance service.
Call your authorized Konica Service Representative.
Lights up when the paper source currently selected for use
runs out of paper.
Lights up when toner will soon run out.
3-14
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3.5
Turning ON and OFF and the Initial Mode
How to Turn the Copier ON/OFF
Turning Copier ON:
➜
Press the Power Switch to the 1 (ON) position.
Turning Copier OFF:
➜
Press the Power Switch to the 2 (OFF) position.
Note
Do not turn the copier OFF while a copy cycle is being run, as paper misfeed will result.
Before attempting to turn the copier OFF, always be sure that the current copy cycle has
been completed.
Turning the copier OFF will initialize all settings except those for the jobs previously
programmed and Utility Mode.
Note
The copier automatically enters the Energy Saver mode 15 min after it has been touched
last. It enters the Auto Shut OFF mode automatically 30 min after it has been touched last.
The time for the copier to enter the Energy Saver and Auto Shut OFF mode can be set in
the User’s Choice mode. For details, refer to “Using the Utility Mode” (p.7-1, p.7-8).
When Copier is Turned ON
When the Power Switch is turned ON, the [START] key starts blinking indicating that the copier
is warming up.
At this time, the copier can be specified for the Auto Copy Start function by loading a document
in the Automatic Document Feeder and pressing the [START] key.
Pressing the [START] key at this time will not immediately start the copy cycle. Rather, you are
going to have to wait for about 30 seconds (at an ambient temperature of 73.4°F/23°C).
Konica 7115/7118
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Default Settings
When the copier is turned ON, the function indicators on the control panel will indicate the
default settings which serve as the reference for all control panel settings to be made later.
Default settings
G
G
G
G
G
Number of copies: 1
Exposure: Auto
Zoom ratio: 100% (full size)
Paper: APS (When Automatic Document Feeder is mounted)
Output: Non-Sort
Tip
The default settings can be customized in the User’s Choice mode. (p.7-2)
3-16
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3.6
Useful Functions
Panel Resetting
Press the [AUTO RESET] key to return all modes and functions (zoom ratio, number of copies,
etc.) to their defaults. (All selected settings are canceled.)
Tip
The [AUTO RESET] key comes in handy for canceling all selected settings at one time.
To avoid accidentally using settings from the previous copy job, press the [AUTO RESET]
key to return all functions and settings to their defaults before making any setting for your
current job.
Auto Panel Reset
settings to their defaults 1 min after a copy cycle has been completed or a key has been
touched.
Tip
The length of time before the copier automatically resets itself can be set between 30
seconds and 5 min. The Auto Panel Reset function can even be disabled.
For more details, refer to “User’s Choice” (p.7-2, p.7-8).
Konica 7115/7118
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Power Saver
Instead of turning the copier OFF, it can be set to standby mode (Power Saver mode).
To set the copier into the Power Saver mode, press the [POWER SAVE] key. In addition, if the
copier is not used for a set length of time, it will automatically enter the Power Saver mode. The
default length of time is 15 min.
To cancel the Power Saver mode, press any key on the control panel.
Note
If the Auto Shut-OFF function is activated while the copier is in the Power Saver mode, the
copier will automatically turn itself OFF.
Tip
The length of time before the copier enters the Power Saver mode can be set between 1
min and 240 min.
For more details, refer to “User’s Choice” (p.7-2, p.7-8).
Auto Shut-OFF
If a set length of time elapses after the copier has been used last, the copier is designed to
automatically turn itself OFF to save energy. The default length of time is 30 min.
Tip
The length of time before the Auto Shut-OFF function is activated can be set between 15
min and 240 min. The Auto Shut-OFF function can also be disabled. For more details, refer
to “User’s Choice” (p.7-2, p.7-8 and p.7-26).
Auto Copy Start
If a document is loaded and the [START] key is pressed during the period after the copier has
been turned ON but before it is ready to make copies, the copier will automatically start the copy
cycle as soon as it completes the warm-up cycle.
3-18
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Interrupting Copy Jobs
job. To interrupt a current job, press the [INTERRUPT] key.
Press the [INTERRUPT] key a second time to return to the stopped job.
Note
Depending on the specific settings made, the current job may reject the Interrupt mode.
Also, some functions are not available for the Interrupt mode. For more details, refer to the
“Function Combination Table” (p.10-6).
Auto Tray Switching
If the current tray runs out of paper during a copy cycle and there is another tray loaded with
paper of the same size and in the same direction, the copier will automatically select that tray
to continue copying.
Konica 7115/7118
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Account Number
If account numbers have been programmed, use of the copier can be limited to certain people
or to a specified number of copies for each account.
Note
If account numbers have been programmed, the copier
cannot be used unless the specific account number is
entered first.
<Account number entry screen>
To use this function, set “Copy Track” of “Administrator
Mode” under the Utility mode. (p.7-20)
To enter an account number
1 Enter the 3-digit account number on the KEYPAD.
Do you want to correct the access number just
entered?
?
➜
Press the [CLEAR] key and then enter the correct
account number.
2 Press the [ID] key.
3 The account number entry screen changes to the default setting indication, indicating that
the copier is ready to make copies. Run the desired copy cycle.
4 When the copy cycle is completed, press the [ID] key a second time.
3-20
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Printing from the Personal Computer
When the optional printer controller is installed, the copier can be used as a printer configured
to a computer network.
For details of operation, refer to the Printer Controller User’s Manual.
Sending and Receiving Faxes Using the Copier
When the optional Fax Unit is mounted, fax transmission can be made using this copier.
For details of operation, refer to the Fax Unit User’s Manual, available separately.
Konica 7115/7118
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3.7
Copy Paper
Paper Specifications
The following table specifies the type and size of paper to be used with each tray together with
its capacity.
1st Tray
Specifications
Paper Type
•
•
Plain paper, recycled paper (16 lbs. to 24 lbs.)
Special paper:
Card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards, labels
Paper Size
Capacity
•
11×17L, 11×14L, Legal L, Letter, Invoice
Width: 3-9/16 in. to 11-11/16 in.
Length: 5-1/2 in. to 17 in.
•
•
Plain paper, recycled paper: 250 sheets
Special paper: 20 sheets
2nd Tray
Specifications
Paper Type
Plain paper, recycled paper (16 lbs. to 24 lbs.)
11 × 17L to Invoice L
Paper Size
Capacity
250 sheets
*
Same with the 3rd, 4th, and 5th Tray
Manual Bypass Tray
Specifications
Paper Type
•
•
Plain paper, recycled paper (16 lbs. to 24 lbs.)
Special paper:
Card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards, labels
Paper Size
Capacity
•
•
Width: 3-9/16 in. to 11-11/16 in.
Length: 5-1/2 in. to 17 in.
1 sheet
Multiple Bypass Tray
Specifications
Paper Type
•
•
Plain paper, recycled paper (16 lbs. to 24 lbs.)
Special paper:
Card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards, labels
Paper Size
Capacity
•
•
Width: 3-9/16 in. to 11-11/16 in.
Length: 5-1/2 in. to 17 in.
•
•
Plain paper, recycled paper: 50 sheets
Special paper: 20 sheets
3-22
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
Precautions for Loading Paper
G
capacity). Otherwise, a paper misfeed can occur.
G
in the User’s Choice mode. (p.7-9)
G
G
When loading nonstandard size paper in the 1st Tray, set “Custom Size Input” in the Utility
mode. (p.7-14)
G
G
G
G
G
When loading nonstandard size paper in the Bypass Tray, perform the “Custom Size Input
(Bypass Tray)” procedure under “Making Copies.” (p.5-9)
When loading Cards, OHP transparencies, or postcards in the 1st Tray, change “Paper
Type (1st Tray)” in the User’s Choice mode. (p.7-9)
When loading Cards, OHP transparencies, or postcards in the Bypass Tray, change “Paper
Type (Bypass Tray)” in the User’s Choice mode. (p.7-9)
To disable Auto Paper or Auto Tray Switching with recycled paper loaded in the tray, change
“Special Paper Setting” in the User’s Choice mode. (p.7-9)
When loading paper of any FLS size other than the default setting (210 mm × 330 mm),
setting by your authorized Konica Service Representative is necessary. Consult your
authorized Konica Service Representative for this setting.
For information regarding loading paper, refer to “When the Add Paper Indicator Lights.” (p.8-4)
Konica 7115/7118
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Making Copies
3
3-24
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
4
Loading Originals
4.1
Two Ways to Load the Original
The original may be loaded in the Automatic Document Feeder or placed directly on the Platen
Glass. Choose the appropriate method according to the type of the original.
Specific Types of Originals
Original Loading
Original Type
Original Size
Automatic Document Feeder
Sheet originals
11×17L to InvoiceL
•
Weight of originals: 13-1/4 lbs. to
29-1/4 lbs.
•
•
Original width: 3-9/16 in. to 11-11/16 in.
Original length: 8-1/4 in. to 17 in.
•
Weight of originals of mixed sizes:
16 lbs. to 24 lbs.
Platen Glass
Max. weight of sheet originals,
books, or three-dimensional objects:
6-1/2 lbs.
11×17L to Invoice
•
•
Original width: Up to 11-11/16 in.
Original length: Up to 17 in.
Konica 7115/7118
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
4.2
Loading Originals in the Automatic Document Feeder
The Automatic Document Feeder automatically feeds originals one page after another and lets
the copier scan the data on each original. After the copier completes scanning the data, the
Automatic Document Feeder ejects it into its tray. To ensure the best possible performance of
the Automatic Document Feeder, use only originals of the appropriate type.
Precautions for Using the Automatic Document Feeder
The following types of originals are not suitable for use in the Automatic Document Feeder, as
a misfeed or damaged original could result. Place these types of originals on the Platen Glass.
G
G
G
G
G
G
G
Typing paper, paraffin paper, and other thin paper
Cards
Originals larger than 11×17L or smaller than 5-1/2×8-1/2
OHP transparencies, translucent paper
Wrinkled, dog-eared, curled, or torn originals
Clipped or stapled originals
Coated originals such as carbon-backed paper
Note
When the originals are loaded into the Automatic Document Feeder, the original sizes that
can be detected in the Auto Paper mode are 11”×17”, 8.5”×14”, 8.5”×11”L, 8.5”×11”,
5.5”×8.5”L. The copier may not be able to detect, or may detect another or irregular size.
4-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
Loading the Originals
1 Slide the front adjustable Document Guide Plate to the
size of the originals.
2 Place the stack of originals face up on the Document
Feeder Tray.
Is the stack of originals neat?
?
➜
➜
➜
The maximum number of originals that can be loaded
is 50.
Be sure that the top level of the original stack does not
exceed the Ä marking.
the front and rear edges of the original stack. If they
are not pressed snugly against the original stack, skewed feeding could result.
➜
You can make copies automatically from originals of assorted sizes loaded in the
Automatic Document Feeder. Refer to “Mixed Originals.” (p.4-4)
3 Make the necessary settings.
❍
❍
Making Copies (p.5-1)
Advanced Copying (p.6-1)
4 Press the [START] key to start feeding and copying the
originals from the top page.
Konica 7115/7118
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
Mixed Originals
A stack of originals of different sizes can be copied as a set using the Automatic Document
Feeder.
Originals
Copies
(APS)
Note
This feature can be used only if the width of the originals is the same. E.g.: Ledger and
Letter
Making Copies from Originals of Mixed Sizes
1 Slide the front adjustable Document Guide Plate to the
front of the copier.
2 Load the originals face up in the Document Feeder Tray
so that their rear edges are in correct alignment with the
Document Guide Plate.
4-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
3 Press the front adjustable Document Guide Plate tightly
up against the front edges of the originals.
Is the stack of originals neat?
?
➜
➜
➜
The maximum number of originals that can be loaded
is 50.
Be sure that the top level of the original stack does not
exceed the Ä marking.
Be sure that the Document Guide Plates touch both
the front and rear edges of the original stack. If they
are not pressed snugly against the original stack, skewed feeding could result.
4 Press the [ORIGINAL] key to light the MIXED ORIGINAL
indicator.
5 Press the [APS/AMS] key to light the Auto Paper
indicator.
6 Press the [START] key to start feeding and copying the
originals from the top page.
Konica 7115/7118
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
4.3
Place the Original on the Platen Glass
The method for positioning the original differs depending on the type of original being used. Be
sure to use the appropriate method that best suits the type of original. Refer to p.4-2 for
information on using the Automatic Document Feeder.
Precautions for Placing the Original on the Platen Glass
Care should be used when positioning the following types of originals.
An original of a nonstandard size:
G
The copier is unable to detect the original size automatically, meaning that neither APS nor
AMS can be used. Therefore, use the [SIZE] key to select the paper size, or the [RE] key
to select the zoom ratio. (p.5-11)
A highly transparent original (OHP transparencies, translucent paper, etc.):
Place a blank sheet of paper of the same size over the original. (p.4-8)
A book or other three-dimensional object:
G
G
Let the copier scan the contents of the original with the Original Cover or the Automatic
Document Feeder raised. Do not attempt to push the Platen Glass with excessive force, as
a malfunction could result. (The maximum load resistance of the Platen Glass is 6-1/2 lbs.)
4-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
How to position a sheet original
Use the following procedure to position plain paper or an original that is not suitable for use in
the Automatic Document Feeder.
1 Raise the Automatic Document Feeder or Original Cover.
2 Place the original face down on the Platen Glass.
3 Position the original in the left rear corner aligned with the
marker on the scale.
4 Gently lower the Automatic Document Feeder or Original Cover.
5 Make the necessary settings.
❍
❍
Making Copies (p.5-1)
Advanced Copying (p.6-1)
6 Press the [START] key to start the copy cycle.
Konica 7115/7118
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
Highly Transparent Originals
When making a copy from OHP transparencies, translucent paper, or other highly
transparent original, position the original as detailed below.
1 Raise the Automatic Document Feeder or Original Cover.
2 Place the original face down on the Platen Glass.
3 Position the original in the left rear corner aligned with the
marker on the scale.
4 Place a blank sheet of paper of the same size over the
original.
5 Gently lower the Automatic Document Feeder or Original Cover.
6 Make the necessary settings.
❍
❍
Making Copies (p.5-1)
Advanced Copying (p.6-1)
7 Press the [START] key to start the copy cycle.
4-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
Books
When copying an open book or magazine, position the original as detailed below.
1 Raise the Automatic Document Feeder or Original Cover.
2 Position the book face down on the Platen Glass, with the
top of the book toward the rear of the copier and the
center of the open book aligned with the book mark
(
) on the scale.
Are there any cautions when you place a book directly
on the Platen Glass?
?
➜
Do not place any object that weighs more than 6-1/2
lbs. on the Platen Glass. In addition, do not press
down hard on the book, as damage to the Platen
Glass could result.
3 Gently lower the Automatic Document Feeder or Original
Cover.
Is a thick book or object being copied?
?
➜
Let the copier scan the original without lowering the Automatic Document Feeder or
Original Cover. Do not look directly at the Platen Glass surface during a scanning
sequence since a strong beam of light is emitted. This light beam is not, however, a laser
beam and is not as dangerous.
4 Make the Book Copy setting.
Book Copy (p.6-3)
❍
Konica 7115/7118
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Originals
4
4-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5
Making Copies
5.1
Copying
The following procedure describes how to place an original and make a copy of it.
Making a Basic Copy
1 Position the original.
❍
Original Loading (p.4-1)
2 Make the necessary control panel settings.
❍
❍
❍
Selecting the Paper (p.5-3)
Zoom Ratio (p.5-11)
Image Density (p.5-16)
3 Enter the number of copies to be made on the KEYPAD.
Any number from 1 to 99 can be entered.
Konica 7115/7118
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
4 Press the [START] key.
This will start the copy cycle.
To stop the copy cycle in mid-operation, press the [STOP]
key.
5-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5.2
Selecting the Paper
Before making a copy, you must select the tray containing the paper you wish to use.
The paper source is either selected automatically when the size of the original is detected, or
you specify the specific paper source manually.
G
APS:
When “APS” is selected, the tray containing the most suitable size of paper is selected
based on the size of the original and the set zoom ratio.
G
Manual paper selection:
The tray containing the paper you want to use can be manually selected.
Note
The copier must be equipped with an Automatic Document Feeder to use “APS.”
Using “APS”
1 Load the originals in the Automatic Document Feeder.
❍
Original Loading (p.4-1)
2 Press the [APS/AMS] key on the control panel to light the
APS indicator.
3 Make the other necessary settings.
❍
❍
Zoom Ratio (p.5-11)
Image Density (p.5-16)
4 Enter the number of copies to be made on the KEYPAD and press the [START] key.
Note
If the copier does not find paper of the appropriate size immediately after the [START] key
has been pressed, this paper size indicator on the control panel starts blinking. Load the
paper or press the [SIZE] key and select another desired paper size before pressing the
[START] key again.
Konica 7115/7118
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
Manual Paper Selection
1 Position the original.
❍
Original Loading. (p.4-1)
2 Press the [SIZE] key on the control panel until the desired
paper size indicator lights.
3 Make the other necessary settings.
❍
❍
Zoom Ratio (p.5-11)
Image Density (p.5-16)
4 Enter the number of copies to be made on the KEYPAD and press the [START] key.
Tip
The Display shows different marks according to the type of paper set by selecting User’s
Choice. Details:
Cards and postcards
OHP transparencies
Plain paper
If plain paper is set in User’s Choice, the “1” mark will not be displayed even if cards or
postcards, or OHP transparencies, are loaded in the tray.
5-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5.3
Feeding Paper Manually
Paper can be fed manually through the Bypass Tray if you want to copy onto paper that is not
loaded in any tray, or if you want to copy onto special paper, such as OHP transparencies,
postcards, or cards.
The following types of paper can be fed through the Bypass Tray
G
G
G
Plain paper (weighing 16 lbs. to 24 lbs.)
Recycled paper (weighing 16 lbs. to 24 lbs.)
Special paper: Card (weighing 24-1/4 lbs. to 42 lbs.), OHP transparencies, postcards, and
labels
Sizes of paper that can be fed through the Bypass Tray
G
Maximum size: 11-11/16 in. × 17 in.
Minimum size: 3-9/16 in. × 5-1/2 in.
G
Note
Insert one sheet of paper at a time when using the Manual Bypass Tray to make a copy. If
the optional Multiple Bypass is mounted, the Bypass Tray can hold up to 50 sheets of paper,
or 20 sheets of cards, postcard, or OHP transparencies.
Konica 7115/7118
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
Making Copies by Using the Bypass Tray
<Manual Bypass Tray>
1 Position the original.
❍
Original Loading (p.4-1)
2 Slide the Paper Guides to the size of the paper. Load a
down. At this time, gently insert the paper until it is
stopped. Note that the Bypass Tray location indicator on
the control panel lights.
Do you want to use a type of paper other than plain
paper?
?
➜
To use cards, postcards, or OHP transparencies, first
(p.7-9).
➜
When loading cards or postcards, be sure to smooth out any curl in the paper.
3 Press the [BYPASS TRAY SIZE SELECT] key until the
size of the paper loaded indicator blinks.
❍
If the paper used is of custom size, its size must be
input. Refer to the “Custom Size Input (Bypass Tray)”
procedure that follows. (p.5-9)
Do you know which FLS size has been set?
?
➜
The FLS size has been set to 210 mm × 330 mm.
Ask your authorized Konica Service Representative if
you want to change the FLS size.
4 Press the [ENTER] key.
5-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5 Make any other necessary settings.
❍
❍
Zoom Ratio (p.5-11)
Image Density (p.5-16)
6 Press the [START] key.
Tip
If the same settings apply to the second and subsequent sheets of paper, you have only to
load the paper in the Bypass Tray. This will automatically start the new copy cycle.
Tip
To make copies continuously on cards, OHP transparencies, or postcards, load the paper
in the 1st Tray. Refer to “Copy Paper”(p.3-22) and “Adding Paper” (p.8-4).
Konica 7115/7118
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
<Multiple Bypass Tray>
1 Position the original.
❍
Original Loading (p.4-1)
2 Adjust the Paper Guides and the Bypass Tray Extender to
paper faces down. At this time, gently insert the paper
stack until it is stopped. Note that the Bypass Tray
location indicator on the control panel lights.
Do you want to use a type of paper other than plain
paper?
?
➜
To use cards, postcards, or OHP transparencies, first
Refer to “Paper Type (Bypass Tray)” (p.7-9).
➜
When loading cards or postcards, be sure to smooth out any curl in the paper.
3 Press the [BYPASS TRAY SIZE SELECT] key until the
size of the paper loaded blinks.
❍
If the paper used is of custom size, its size must be
input. Refer to the “Custom Size Input (Bypass Tray)”
procedure that follows. (p.5-9)
Do you know which FLS size has been set?
?
➜
Ask your authorized Konica Service Representative if
you want to change the FLS size.
4 Press the [ENTER] key.
5 Make any other necessary settings.
❍
❍
Zoom Ratio (p.5-11)
Image Density (p.5-16)
6 Press the [START] key.
5-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
<Custom Size Input (Bypass Tray)>
1 Slide the Paper Guides to the size of the paper. Gently
insert the paper with the paper facing down until it is
stopped. Note that the Bypass Tray location indicator on
the control panel lights.
2 Press the [BYPASS TRAY SIZE SELECT] key until the
Custom Size indicator blinks.
3 Press the [ENTER] key.
4 Press the [CLEAR] key to clear the old value shown on
the Display.
Konica 7115/7118
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5 Enter the length (mm) of the paper on the KEYPAD.
Do you know what is the range for the paper width of
custom size?
?
➜
The width can range from 90 mm to 297 mm.
Do you want to change the value just entered?
?
➜
Press the [CLEAR] key and then re-enter the new
value.
Width
What are the precautions for entering a custom size?
?
➜
Note the conventions for the paper dimensions, width
and length.
6 Press the [ENTER] key.
Length
7 Press the [CLEAR] key to clear the old value shown on
the Display.
8 Enter the length (mm) of the paper on the KEYPAD.
Do you know the range for paper length of custom
size?
?
➜
The length can range from 140 mm to 432 mm.
Do you want to change the value just entered?
?
➜
Press the [CLEAR] key and then re-enter the new
value.
9 Press the [ENTER] key.
TIP
Enter the value by mm using the KEYPAD.
Refer to the conversion rate below.
1 inch = 25.4 mm
5-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5.4
Specifying the Zoom Ratio
By specifying a zoom ratio, the copy can be enlarged or reduced.
Types of Zoom Ratio Setting
Description
AMS
This setting automatically selects the most appropriate zoom ratio based on the
size of the original loaded and the paper size selected for use. The copier must
be equipped with an Automatic Document Feeder.
Fixed ratios
The following optimum zoom ratios are available for making copies from
commonly used original sizes to standard paper sizes.
•
•
•
•
•
•
50%
64% (11×17 Ö 8.5×11)
77% (11×17 Ö 8.5×14)
129% (8.5×11 Ö 11×17)
155% (5.5×8.5 Ö 8.5×14)
200%
Ratios set using Zoom ([ ][ ])
key
Touching the [ ] or [ ] key increases or decreases the zoom ratio in 1%
increments. The ratio can range from 50% to 200%.
Full Size
This setting makes a copy the same size as the original (100%).
X/Y Zoom
This setting allows the zoom ratio to be set independently for X (horizontal) and Y
(vertical) directions.
The ratios can be set directly on the KEYPAD, in the range between 50% and
100%.
Konica 7115/7118
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
Setting the Zoom Ratio
<AMS>
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [APS/AMS] key on the control panel until the
AMS indicator lights.
3 Make any other necessary settings.
❍
Image Density (p.5-16)
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
5-12
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
<Fixed and Variable Zoom Ratios>
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [RE] key on the control panel until the desired
zoom ratio indicator lights.
❍
To set a custom zoom ratio, press [ ] or [ ] key to
reach the desired ratio. Pressing this key changes the
ratio in 1% increments.
3 Make any other necessary settings.
❍
❍
Paper (p.5-3)
Image Density (p.5-16)
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica 7115/7118
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
X/Y Zoom
This setting allows you to enter the zoom ratio for X and Y independently on the KEYPAD.
1 Position the original.
❍
Original Loading (p. 4-1)
2 Press the [X/Y ZOOM] key on the control panel to light the
X/Y ZOOM indicator.
3 Press the [CLEAR] key to clear the old value for X
(length).
4 First, enter the zoom ratio (%) for X (length) on the
KEYPAD and then press the [ENTER] key.
Do you know the range for the value X in X/Y Zoom?
?
➜
The ratio can range from 50% to 100%.
Do you want to change the value just entered?
?
➜
Press the [CLEAR] key and then re-enter the new
value.
What happens when a value outside the specified range is entered?
?
➜
The Display shows “Err.” Press the [CLEAR] key and
re-enter a new value that falls within the range.
Y (width)
X
(length)
5 Press the [CLEAR] key to clear the old value for Y (width).
5-14
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
6 Enter the zoom ratio (%) for Y (width) on the KEYPAD and
then press the [ENTER] key.
?
➜
The ratio can range from 50% to 100%.
7 Make any other necessary settings.
❍
❍
Zoom Ratio (p.5-11)
Image Density (p.5-16)
8 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica 7115/7118
5-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5.5
Adjusting the Image Density
The image density setting can be adjusted in two broad modes, “Text” and “Photo.”
Image Density Setting
G
Text mode:
The image density can be adjusted either automatically (Auto) or manually in five steps.
❍
❍
The image density is adjusted automatically according to the original from which a copy will
be made.
When you want to make a copy from newspaper or magazine and you do not want the
backside image to be produced on the copy, use the [ ] key to select a lighter setting. To
reproduce a pale color of a bright image, use the [ ] key to select a darker setting.
Selecting a darker setting could result in a background image being reproduced on the copy,
while selecting a lighter setting could make the copy image itself too light: Select the
G
Photo mode:
Select Photo when making a copy from an original having a large halftone image, such as
photos.
Setting the Image Density
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [DENSITY SET] key on the control panel to
select the desired mode.
Do you know how to select Auto?
?
➜
Light the auto exposure indicator as shown on the
right.
Auto
5-16
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
3 If you want to adjust the image density manually, press
the [ ] or [ ] key to select the desired setting.
Do you know how to select Photo?
?
➜
Light the Photo indicator. In the Photo mode, Auto
cannot be selected.
Do you know how to select Photo?
?
➜
Light the MANUAL/PHOTO indicator. In the Photo
mode, Auto cannot be selected.
Do you know what to do after selecting Manual?
?
➜
Refer to the diagram on the right for the relationship
between the control panel indication and image
density.
Lightest
(Level -2)
Lighter
(Level -1)
Medium
(Level 0)
Darker
(Level 1)
Darkest
(Level 2)
4 Make any other necessary settings.
❍
❍
Paper (p.5-3)
Image Density (p.5-16)
5 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica 7115/7118
5-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5.6
Interrupting a Copy Job
By selecting the [INTERRUPT] key, a multi-copy cycle can be stopped at any time to make an
urgent copy.
Note
Some functions cannot be interrupted. Also, some settings may not be available when a
copy job is interrupted. For more details, refer to the “Function Combination Table” (p.10-6).
To Interrupt a Copy Job
1 Press the [INTERRUPT] key.
The Interrupt indicator lights and the current copy cycle
pauses.
Do you know what settings can be selected when the
[INTERRUPT] key is pressed?
?
➜
When the [INTERRUPT] key is pressed, all functions
and settings indicated on the control panel are reset to
their defaults.
2 Remove the original of the interrupted copy job and then
position the new one that you want to copy.
5-18
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
3 Make any other necessary settings.
❍
❍
❍
Paper (p.5-3)
Zoom Ratio (p.5-11)
Image Density (p.5-16)
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
This will start the interrupt copy cycle.
5 After the interrupt copy has been made, press the [INTERRUPT] key:
The Interrupt indicator will go out and the settings will be recovered for the interrupted copy
job.
6 Reposition the original for the interrupted copy job that has been removed in step 2.
7 Press the [START] key.
The interrupted copy job will be resumed.
Konica 7115/7118
5-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
5
5-20
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
6
Advanced Copying
This section describes the setting combinations for the various types of originals and copies and
the procedure for selecting the appropriate settings to produce the intended results. The [ORIG-
INAL] key and the [COMBINATION] key on the control panel allow you to make the various set-
ting combinations.
6.1
Making 1-Sided Copies
1-sided:
➜
This is the ordinary 1-sided copy that this copier can make
from a 1-sided original.
Original
Copy
2 in 1:
Important
✔
This setting is available only when the copier is equipped with an Automatic Document
Feeder.
➜
The copier makes a 1-sided side-by-side copy from two 1-
sided originals.
Originals
Copy
4 in 1:
Important
✔
This setting is available only when the copier is equipped with an Automatic Document
Feeder.
➜
The copier copies four different 1-sided originals onto one
side of a single sheet of paper.
Originals
Copy
Konica 7115/7118
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
Copies
6
Book Copy
The copier makes 1-sided page-by-page copies of an
open book.
➜
Original
Making Settings for 2 in 1 and 4 in 1 Copies
1 Load the originals in the Automatic Document Feeder.
❍
Original Loading (p.4-1)
2 Press the [COMBINATION] key to light either the 2 in 1 or
4 in 1 indicator.
3 Make any other necessary settings.
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
6-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Making Settings for Book Copy
1 Position the original.
❍
2 Press the [ORIGINAL] key to light the BOOK COPY indi-
cator.
Is your book left-bound or right-bound?
?
➜
User’s Choice allows you to select the type of book.
The default setting is left-bound. If your book is right-
bound, change the setting for “Book Binding Position.”
(p.7-7)
3 If you want to erase the four edges or the center of the original, press the [MARGIN ERASE]
key to specify the erase position.
Which one of the three options available for book erase do you want to select?
?
➜
➜
➜
Frame Erase:
Original
Original
Original
Copies
Copies
Copies
Erases a given width along the outside edges.
Center Erase:
Erases a given width down the center.
Frame + Center Erase:
Erases a given width along the outside edges as well
as down the center.
Konica 7115/7118
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Do you know how to set the erase width for each erase function?
?
➜
The frame erase width can be set in the range between 1/4 and 3/4, in 1-mm (1/16) in-
crements. The default value is 1/2.
➜
➜
Only 1/2 is available for the center erase width.
To change the setting for the frame erase width, use “Erase Setting” in the User’s Choice
mode. (p.7-8)
4 Make any other necessary settings.
5 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
6-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
6.2
Output Copies (Sort and Group)
When copying or printing two or more copies of a document, the copies can be divided either
by sets containing a copy of each page (Sort) or by pages (Group).
Three Output Types
Non-Sort:
➜
The copies are stacked on top of each other as they are
made.
Originals
Copies
Sort:
The copies are automatically divided into sets with each
set containing a copy of each page.
➜
Originals
Copies
Group:
The copies are automatically divided into stacks with each
stack containing copies of the same page.
➜
Originals
Copies
Konica 7115/7118
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Sorting
The copies are automatically divided into sets with each set containing a copy of each page.
The following three types are available: electronic sorting, shift sorting, and crisscross sorting.
What is electronic sorting?
Important
✔
The copier must be equipped with an Automatic Document Feeder and a 16MB Memory for
Copier or 32MB Memory for Copier.
➜
The copies are sorted into complete sets of the originals.
What is shift sorting?
Important
✔
➜
The copier must be equipped with an Automatic Document Feeder and a Shifting Unit.
The sorted copy sets are stacked in the same direction,
but in a sawtooth manner by shifting the tray for each set.
6-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
What is crisscross sorting?
Important
✔
The copier must be equipped with an Automatic Document Feeder, 16MB Memory for Copi-
er or 32MB Memory for Copier and Paper Feed Cabinet or Multiple Bypass Tray.
➜
The sorted copy sets are stacked in a crisscross manner,
one set stacked lengthwise on top of another set stacked
crosswise.
Note
To enable crisscross sorting, the copier must be loaded with paper of the same size, but in
two different directions.
Note
Crisscross sorting cannot be effected if a Shifting Unit is mounted.
Konica 7115/7118
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Grouping
The copies are automatically divided into stacks with each stack containing copies of the same
page. The following two types are available: shift grouping and crisscross grouping.
What is shift grouping?
Important
✔
➜
The copier must be equipped with an Automatic Document Feeder and a Shifting Unit.
The grouped copy stacks are stacked in the same direc-
tion, but in a sawtooth manner by shifting the tray for each
stack.
What is crisscross grouping?
Important
✔
The copier must be equipped with an Automatic Document Feeder, 16MB Memory for Copi-
er or 32MB Memory for Copier and Paper Feed Cabinet or Multiple Bypass Tray.
➜
The grouped copy stacks are stacked in a crisscross
manner, one stack lengthwise on top of another stack
crosswise.
Note
To enable crisscross grouping, the copier must be loaded with paper of the same size, but
in two different directions.
Note
Crisscross grouping cannot be effected if a Shifting Unit is mounted.
6-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Choosing a set for Finishing
1 Load the originals in the Automatic Document Feeder.
Original Loading (p.4-1)
❍
2 Press the [OUTPUT] key to select the desired finishing
function.
Do you know what it means when both Sort and Group
indicators are off?
?
➜
It means that Non-Sort is currently selected for use.
3 Make any other necessary settings.
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica 7115/7118
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
6.3
Erasing Part of Original Image (Margin Erase)
The copier erases a margin of a set width along the edges or erases any other unwanted imag-
es. One of the following four different erase functions can be selected:
What is Left Erase?
➜
A given width is erased from the left edge of the copy.
Original
Original
Original
Copy
Copy
Copy
What is Upper Erase?
A given width is erased from the top edge of the copy.
➜
What is Frame Erase?
A given width along all four edges is erased.
➜
What is Center Erase?
➜
A given width is erased down the center.
Original
Copies
Note
The Center Erase setting is available only when Book Copy is selected.
6-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Tip
Frame + Center Erase can be set only if Book Copy has been selected. (p.6-3)
Precautions for Erase Position
Note the correct direction of positioning the original when making copies in the Erase mode. For
more details, refer to the table given below.
Result
Platen Glass
Automatic Document Feeder
Left Erase
Upper Erase
Frame Erase
Konica 7115/7118
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
Setting the Margin Erase Function
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [MARGIN ERASE] key to light the desired
erase position indicator.
Do you know how to set the erase width for each
erase function?
?
➜
The Left, Upper, and Frame erase width can be set in
the range between 1/4 and 3/4, in 1-mm (1/16) incre-
ments. The default value is 1/2.
➜
➜
Only 1/2 is available for the Center erase width.
To change the erase width, change the setting for
“Erase Setting” of User’s Choice. (p.7-8)
3 Make any other necessary settings.
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
6-12
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
6.4
Reversing Original Tonal Arrangements (Reverse Image)
The white part (background) and the black part (text) are reversed on the copy.
Original
Copy
Setting Reverse Image
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [REVERSE IMAGE] key and make sure that the
REVERSE IMAGE indicator lights.
3 Make any other necessary settings.
4 Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica 7115/7118
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Copying
6
6.5
Providing a IMAGE SHIFT
The copier provides a file margin along the leading edge for ease in filing.
What is IMAGE SHIFT?
Original
Copy
➜
The image of the original is shifted to the right to leave a
margin along the left edge of the copy.
Precautions for IMAGE SHIFT Position
Study the illustration below to be sure of the correct direction of placing the original when mak-
ing a copy with an image shift.
Platen Glass
Automatic Document Feeder
Setting IMAGE SHIFT
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [IMAGE SHIFT] key to light the IMAGE SHIFT
indicator.
Do you know how to set the image shift width?
?
➜
➜
The IMAGE SHIFT width can be set in the range be-
tween 0 and 3/4, in 1-mm (1/16) increments. The de-
fault value is 1/2.
To change the IMAGE SHIFT width, change the set-
ting for “IMAGE SHIFT Width Adjust” in the User’s
Choice mode. (p.7-7)
3 Make any other necessary settings.
4 Enter the number of copies to be made on the KEYPAD and then press the [Start] key.
6-14
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7
Using the Utility Mode
The Utility mode offers the following subfunctions.
Code
Name
Description
1
User’s Choice
Allows you to select the default setting for each of the
various functions.
2
3
4
5
Drum Dehumidify
Toner Replenisher
Custom Size Input
Administrator Mode
Removes dewdrops that have formed on the surface of the
PC Drum.
Replenishes the supply of toner to make up for a lower
toner-to-carrier ratio.
Sets a custom size for the 1st Tray if it is loaded with paper
of a nonstandard size.
Allows the administrator of the copier to make settings for
operating and maintaining the copier.
Calling the Utility Mode to the Display
1 Hold down the [AUTO RESET] key for 3 seconds.
2 Check that “U--” appears on the Display.
3 Using the KEYPAD, enter the code corresponding to the
desired subfunction.
E.g.: Enter “1” to make a setting in User’s Choice.
4 Press the [START] key.
Konica 7115/7118
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.1
User’s Choice
The functions set and established on the control panel when the copier is turned ON or the
[AUTO RESET] key is pressed are called the default settings. These settings can be modified
by selecting User’s Choice. Refer to the table given below for the code and default value of
each function.
Default
Value
Code
Name
Setting
Setting Details
1
Mixed Orig.
0
1
Mixed Orig. enabled
Mixed Orig. disabled
A3L
2
2
Paper Priority
0
1
B4L
2
A4L
3
B5L
4
A5L
5
FLS L
6
A4C
7
B5C
8
A5C
10
11
12
13
14
15
16
20
21
22
23
24
25
0
11x17L
11x14L
Legal L
Letter L
5-1/2x8-1/2L
Letter C
5-1/2x8-1/2C
1st Tray
2nd Tray
3rd Tray *1
4th Tray *1
5th Tray *1
Multiple Bypass Tray
APS
2
3
4
5
Copy Priority
2
2
1
AMS
2
Manual
Density Priority
Density Level (Auto)
0
Auto
1
Manual
2
Photo Manual
Lighter
0
1
Normal
2
2
Darker
7-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Default
Value
Code
Name
Density Level (Manual)
Setting
Setting Details
6
1
2
Step 1
Step 2
3
Step 3
2
2
4
Step 4
5
Step 5
7
Output Priority
0
Non-Sort
1
Sort
2
Group
8
9
Crisscross Mode
0
Crisscross stacking enabled
2
2
2
1
Crisscross stacking disabled
4 in 1 Copy Order
0
Pattern A
1
Pattern B
10
11
Book Binding Position
IMAGE SHIFT Width Adjust
0
Left-bound
1
Right-bound
0
0
:
:
10
:
1/2
:
2
2
2
2
20
5
3/4
1/4
:
12
13
14
Erase Setting (Left)
Erase Setting (Upper)
Erase Setting (Frame)
:
10
:
1/2
:
20
5
3/4
1/4
:
:
10
:
1/2
:
20
5
3/4
1/4
:
:
10
:
1/2
:
20
3/4
Konica 7115/7118
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Default
Value
Code
Name
Setting
Setting Details
15
Auto Panel Reset
0
1
30 seconds
1 min
2
2
2 min
3
3 min
4
4 min
5
5 min
6
Auto Panel Reset disabled
16
17
Power Saver
1
1 min
:
:
15
:
15 min
2
:
240
0
240 min
Auto Shut OFF
Auto Shut OFF disabled
15
:
15 min
:
30
:
30 min
2
2
:
240
0
240 min
18
19
Density (ADF)
Print Density
Mode 1
1
Mode 2
0
-2
1
-1
2
0
2
3
1
4
2
20
21
22
23
24
25
26
Paper Auto Detection (1st Tray)
Paper Auto Detection (2nd Tray)
0
Inch
2
2
2
2
2
2
2
1
Metric
0
Inch
1
Metric
Paper Auto Detection (3rd Tray)
*1
0
Inch
1
Metric
Paper Auto Detection (4thTray)
*1
0
Inch
1
Metric
Paper Auto Detection (5thTray)
*1
0
Inch
1
Metric
Paper Size Detection (1st Tray)
Paper Type (1st Tray)
0
Automatic detection
Size input
Plain paper
Cards, postcards
OHP transparencies
1
0
1
2
7-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Default
Value
Code
Name
Setting
Setting Details
27
Paper Type (Bypass Tray)
0
1
2
0
Plain paper
2
Cards, postcards
OHP transparencies
28
29
30
31
32
33
Special Paper Setting (1st Tray)
APS enabled
2
(Special Paper Setting OFF)
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
APS disabled, Auto Tray Switching
enabled
APS disabled, Auto Tray Switching
disabled
Special Paper Setting (2nd Tray)
APS enabled
(Special Paper Setting OFF)
2
2
2
2
2
APS disabled, Auto Tray Switching
enabled
APS disabled, Auto Tray Switching
disabled
Special Paper Setting (3rd Tray)
*1
APS enabled
(Special Paper Setting OFF)
APS disabled, Auto Tray Switching
enabled
APS disabled, Auto Tray Switching
disabled
Special Paper Setting (4thTray)
*1
APS enabled
(Special Paper Setting OFF)
APS disabled, Auto Tray Switching
enabled
APS disabled, Auto Tray Switching
disabled
Special Paper Setting (5thTray)
*1
APS enabled
(Special Paper Setting OFF)
APS disabled, Auto Tray Switching
enabled
APS disabled, Auto Tray Switching
disabled
Special Paper Setting (Multiple
Bypass Tray)
APS enabled
(Special Paper Setting OFF)
APS disabled, Auto Tray Switching
enabled
APS disabled, Auto Tray Switching
disabled
*1: Konica 7118 only
TIP
Enter the value by mm using the KEYPAD.
Refer to the conversion rate below.
1 inch = 25.4 mm
Konica 7115/7118
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Mixed Orig.
Select whether to enable Mixed Orig. as the default setting.
G
The default value is “Mixed Orig. disabled.”
Paper Priority
Select a paper size or paper source that will be selected automatically when Auto Size is
selected.
G
The default value is “LetterC (8.5x11C).”
Copy Priority
Choose the default mode to be selected automatically when power is turned ON or panel reset,
from among “APS,” “AMS,” or “Manual.”
G
The default value is “APS.”
Density Priority
Choose the image density mode to be selected automatically when power is turned ON or panel
reset, from among “Auto,” “Manual,” or “Photo Manual.”
G
The default value is “Auto.”
Exposure Level Priority (Auto)
Choose the exposure level to be selected automatically when power is turned ON or panel
reset, from among “Lighter,” “Normal,” or “Darker.”
G
The default value is “Normal.”
7-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Exposure Level Priority (Manual)
Set the default value of the exposure level for the Manual exposure mode.
The image becomes lighter toward a smaller number and darker toward a larger number, with
“3” as the center value.
G
The default value is “3.”
Output Priority
Choose the finishing function to be selected automatically when power is turned ON or panel
reset from among “Non-Sort,” “Sort,” or “Group.”
G
The default value is “Non-Sort.”
Crisscross Mode
Select whether to enable or disable crisscross stacking when the conditions for crisscross
stacking are met.
G
The default value is “Enabled.”
4 in 1 Copy Order
Select the copying order in the 4 in 1 mode from among the following two patterns:
1 2
3 4
1 3
2 4
Pattern A
Pattern B
G
The default value is “Pattern A.”
Book Binding Position
Select whether to let the copier scan the left-hand-side page (Left-bound) or the right-hand-side
page (Right-bound) first when it scans an open book.
G
The default value is “Left-bound.”
IMAGE SHIFT Width Adjust
Choose the width of the IMAGE SHIFT to be set in the copy in the range between 0 and 3/4 (in
1-mm (1/16) increments).
G
The default value is “1/2”.
Konica 7115/7118
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Erase Setting (Left, Upper, and Frame)
Set the erase width for each of the Left, Upper, and Frame Erase copies in the range between
1/4 and 3/4 (in 1-mm (1/16) increments).
G
The default value is “1/2” for Left, Upper, and Frame Erase.
Auto Panel Reset
Select the time it takes the auto panel reset function to be activated, from among “30 seconds,”
“1 min,” “2 min,” “3 min,” “4 min,” or “5 min,” or not activated at all.
G
The default value is “1 min.”
Power Saver
Set the time it takes the copier to enter the Power Saver mode, from 1 min to 240 min (in 1-min
increments).
G
The default value is “15 min.”
Auto Shut-OFF
Set the time it takes the Auto Shut-OFF function to be activated, from 15 min to 240 min (in 1-
min increments). To disable the Auto Shut-OFF function, first “authorize” the “Disable Auto Shut
OFF” under the Administrator Mode (p.7-26) before selecting “Auto Shut-OFF disabled.”
G
The default value is “30 min.”
Density (ADF)
Adjust the copy image density level when the copier is equipped with an Automatic Document
Feeder.
Mode 1: Used for the standard original, such as a typed document.
Mode 2: Effective in reproducing a pale original, such as a faint pencil-written document.
G
The default value is “Mode 1.”
Printer Density
Select the image density level of copies and printed pages from among “-2,” “-1,” “0,” “1,” or “2.”
The smaller the value, the lighter the image, and the greater the value, the darker the image
with “0” as the center value.
G
The default value is “0.”
7-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Paper Auto Detection
Select “Inch” if the size of the paper loaded in each tray is designated according to the inch
system, such as Letter. Select “Metric” if the size of the paper loaded in each tray is designated
according to the metric system, such as A4 and B4.
G
The default value is “Inch.”
Paper Size Detection
Select whether to “automatically detect” or “input size” for the paper loaded in the 1st Tray.
G
The default value is “Automatic detection.”
Paper Type (1st Tray)
Select the type of paper loaded in the 1st Tray from among “plain paper,” “cards,” or “OHP
transparencies.”
G
The default value is “plain paper.”
Paper Type (Bypass Tray)
Select the type of paper loaded in the Bypass Tray from among “plain paper,” “cards,” or “OHP
transparencies.”
G
The default value is “plain paper.”
Special Paper Setting
All trays can generally be chosen for the Auto Paper mode. This sometimes results in a situation
in which a tray loaded with special paper is selected for a job, which is not intended by the user.
Therefore, a particular tray, if designated for special paper, can be excluded from Auto Paper
selection.
This function allows you to specify if the designated tray is subject to Auto Tray Switching.
Auto Paper disabled, Auto Tray Switching disabled:
Select this option for paper that is to be used only for special purposes, such as “colored paper”
and “paper printed with a company logo.”
Auto Paper disabled, Auto Tray Switching enabled:
Select this option in cases where “you give priority to plain paper for use,” but “you want an
uninterrupted copy cycle to use recycled paper even when plain paper runs out.”
G
The default value is “Auto Paper enabled (special paper setting OFF).”
Konica 7115/7118
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Making the User’s Choice Settings
User’s Choice Setting Procedure
1 Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Check that “c--” appears on the Display.
5 Enter the code assigned to the desired function on the
KEYPAD.
E.g.: Enter “3” to change the setting for “Copy Priority.”
6 Press the [START] key.
7 Press the [CLEAR] key.
This clears the current setting.
7-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
8 Enter the new setting on the KEYPAD.
E.g.: Enter “2” to change Copy Priority to “Manual.”
Do you want to correct the setting just entered?
?
➜
Press the [CLEAR] key and then enter the new
setting.
9 Press the [START] key.
To further change the setting for another function, repeat
steps 4 through 9.
10 Press the [AUTO RESET] key to return to the default settings.
Konica 7115/7118
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.2
Drum Dehumidify
During times of high humidity or when there are sudden rapid changes in humidity (especially
when you are using a heater in winter), condensation can form on the surface of the PC Drum,
resulting in blotchy copies. In such instances, use the “Drum Dehumidify” function to dry the
surface of the PC Drum.
Tip
A copy or print cycle can be run while in the Drum Dehumidify mode.
The copier automatically leaves the Drum Dehumidify mode after the lapse of a given period
of time.
Running the Drum Dehumidify Sequence
1 Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the Display, enter “2”
on the KEYPAD.
3 Press the [START] key.
7-12
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.3
Toner Replenisher (Auxiliary Toner Replenishing)
The copier tends to exhaust the supply of toner rapidly when making a number of copies from
an original with dark solid areas, such as a photo. As a result, the image density of the copy
will become lighter. In such a case, you can use Toner Replenisher to quickly restore the
normal image density.
Note
toner.
Toner will not be replenished if the image density is sufficiently high.
The toner replenisher sequence ends automatically.
Running the Toner Replenisher Sequence
1 Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the Display, enter “3”
on the KEYPAD.
3 Press the [START] key.
Konica 7115/7118
7-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.4
Custom Size Input
When nonstandard size paper is to be loaded in the 1st Tray, use this function to set the custom
size.
Note
Before making this setting, be sure to select “size input” for “Paper Size Detection” in the
User’s Choice mode.
Tip
To make sure that the correct values are entered, refer to
the illustration on the right to study the convention of the
Y (width)
X (length)
paper length and width.
Custom Size Input Procedure (1st Tray)
1 Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the Display, enter “4”
on the KEYPAD.
3 Press the [START] key.
7-14
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
4 Press the [CLEAR] key.
5 Enter the value of X (length) of the paper to be loaded on
the KEYPAD.
E.g.: Paper length 300 mm
Do you want to change the value just entered?
?
➜
Press the [CLEAR] key and then enter the new value.
Do you know the range for the paper length of custom
size?
?
➜
The length can range from 5-1/2 to 17.
6 Press the [START] key.
7 Press the [CLEAR] key.
8 Enter the value of Y (width) of the paper to be loaded on
the KEYPAD.
E.g.: Paper width 200 mm
Do you want to change the value just entered?
?
➜
Press the [CLEAR] key and then enter the new value.
Do you know the range for the paper width of custom
size?
?
➜
The width can range from 3-9/16 to 11-11/16.
9 Press the [ENTER] key.
Konica 7115/7118
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.5
Administrator Mode
Administrator Mode
The Administrator Mode is for the administrator of your copier. When Administrator Mode is
selected, it is necessary to enter the administrator number.
The Administrator Mode offers two functions to be set: “Copy Track” and “Disable Auto Shut-
OFF.” Study the table given below and make the appropriate setting according to operating
needs.
Default
Value
Code
Name
Setting
Setting Details
1
Copy Track
-
Set the six different functions from A-1 to
A-6 (p.7-18)
-
2
Disable Auto Shut OFF
0
1
Authorized
Not authorized
2
Note
The administrator number is programmed by your authorized Konica Service
Representative. Ask him/her for more details.
The administrator of this copier must remember the administrator number.
Settings for the Administrator Mode
1 Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the Display, enter “5”
on the KEYPAD.
3 Press the [Start] key.
7-16
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
4 Enter the 6-digit administrator number on the KEYPAD.
Do you know how to enter the administrator number?
?
➜
Enter the six digits successively.
Do you want to correct a wrong number just entered?
?
➜
Press the [CLEAR] key and then enter the correct
number.
5 Press the [START] key.
6 Check that “Ad-” appears on the Display.
7 Enter the code assigned to the desired subfunction on the
KEYPAD.
Do you know the code for Copy Track?
?
➜
To select Copy Track, enter “1.”
Do you know the code for Disable Auto Shut OFF?
?
➜
To select Disable Auto Shut OFF, enter “2.”
8 Press the [START] key.
Konica 7115/7118
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Copy Track
Copy Track allows the administrator to keep track of the number of copies made by each
account for a total of up to 20 different accounts.
Default
Value
Code
Name
Setting
Setting Details
A-1
Copy Track
0
1
-
Copy Track enabled
Copy Track disabled
2
-
A-2
A-3
Input Account
Program a 3-digit account number.
Delete Account
-
Delete a 3-digit account number
previously stored.
-
A-4
A-5
A-6
Change Account
-
-
-
Change a 3-digit account number
previously stored.
-
-
-
Total Counter Display by Account
Call to the Display or clear the Total
Counter value for each account.
Total Counter Clear for All
Accounts
Clear the Total Counter values for all
accounts at once.
Copy Track Setting Procedure (A-1)
1 Call the Administrator Mode to the Display.
Calling the Administrator Mode to the Display (p.7-16)
❍
2 Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Making sure that “A--” appears on the Display, enter “1”
on the KEYPAD.
7-18
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
5 Press the [START] key.
6 Select whether to “enable” or “disable” Copy Track by
entering the corresponding number on the KEYPAD.
Do you know the code for “enabling” Copy Track?
?
➜
To enable Copy Track, enter “0.”
Do you know the code for “disabling” Copy Track?
?
➜
To disable Copy Track, enter “1.”
7 Press the [START] key.
Konica 7115/7118
7-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Input Account Procedure (A-2)
1 Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2 Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Making sure that “A--” appears on the Display, enter “2”
on the KEYPAD.
5 Press the [START] key.
6 Enter the 3-digit account number on the KEYPAD.
Do you know the restrictions on entering the account
number?
?
➜
The account number must be in three digits ranging
from 001 to 999.
➜
If an account number entered already exists, the entry
will be rejected. Enter a different number.
7 Press the [START] key.
This stores the account number.
Tip
To program another account number successively, repeat steps 4 through 7.
7-20
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Delete Account Procedure (A-3)
1 Call the Administrator Mode to the Display.
Calling the Administrator Mode to the Display (p.7-16)
❍
2 Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Making sure that “A--” appears on the Display, enter “3”
on the KEYPAD.
5 Press the [START] key.
6 Press [ ] or [ ] key to select the account number to be
deleted.
7 Press the [START] key.
The selected account number will be deleted.
Do you know what to do to delete another account number?
?
➜
Repeat steps 4 through 7.
Konica 7115/7118
7-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Change Account Procedure (A-4)
1 Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2 Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Making sure that “A--” appears on the Display, enter “4”
on the KEYPAD.
5 Press the [START] key.
6 Press [ ] or [ ] key to select the account number to be
changed.
7 Press the [START] key to delete the old account number.
8 Enter the new account number on the KEYPAD.
9 Press the [START] key.
This stores the new account number.
7-22
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Total Counter Display by Account Procedure (A-5)
1 Call the Administrator Mode to the Display.
Calling the Administrator Mode to the Display (p.7-16)
❍
2 Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Making sure that “A--” appears on the Display, enter “5”
on the KEYPAD.
5 Press the [START] key.
6 Press [ ] or [ ] key to select the account number for
which you want to check the Total Counter value.
7 Press the [START] key.
8 The Display will show the Total Counter value.
E.g.: If the Total Counter value is 1,234, then the Display
will show something like that shown on the right.
Do you know how to reset the Total Counter value?
?
➜
Press the [CLEAR] key.
Konica 7115/7118
7-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
9 Press the [START] key.
Then, the Display returns to the status that allows you to select the account number, in step
6.
Do you know how to check or reset the Total Counter of another account successively?
?
➜
Repeat steps 6 through 9.
7-24
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Total Counter Clear for All Accounts Procedure (A-6)
1 Call the Administrator Mode to the Display.
Calling the Administrator Mode to the Display (p.7-16)
❍
2 Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3 Press the [START] key.
4 Making sure that “A--” appears on the Display, enter “6”
on the KEYPAD.
5 Press the [START] key.
6 Check that the Display shows “Clr.”
7 Press the [START] key.
This clears the Total Counter values of all accounts, resetting them to “0.”
Konica 7115/7118
7-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Disable Auto Shut OFF
The Disable Auto Shut OFF function allows the administrator to “authorize” or “not authorize”
the selection of “Auto Shut OFF disabled” under User’s Choice.
G
The default value is “not authorized.”
Setting Disable Auto Shut OFF
1 Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2 Making sure that “Ad-” appears on the Display, enter “2”
on the KEYPAD.
3 Press the [START] key.
4 Press the [CLEAR] key.
This clears the current setting.
7-26
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
5 Enter the new setting on the KEYPAD.
Do you know the number for “authorize” Disable Auto
Shut OFF?
?
➜
Enter “0.”
6 Press the [START] key.
This validates the new setting.
Konica 7115/7118
7-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.6
Checking the Total Number of Copies/Prints Produced
The [COUNTER] key on the control panel allows you to check the total number of copies or
printed pages produced since the installation of the copier.
It provides the following information.
G
Total Counter:
Shows the total number of copies or printed pages produced since the installation of the
copier.
G
Size Counter:
Shows the number of copies or printed pages produced on paper of a preset size. (The size
will be set by your authorized Konica Service Representative.)
Using the [COUNTER] Key
1 Press the [COUNTER] Key.
2 Make sure that “tc” appears on the Display.
The Total Counter value is then displayed.
E.g.: The Display looks like the one shown on the right
when the value is 1,234.
3 If you want to also check the Size Counter, press the
[COUNTER] key a second time.
7-28
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
4 Check that “Sc” appears on the Display.
The Size Counter value is then displayed.
E.g.: The Display looks like the one shown on the right
when the value is 123.
5 After you have checked the counter value or values, press
the [COUNTER] key. Then the original display
reappears.
Konica 7115/7118
7-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
7.7
Storing a Job
You can store frequently used job settings in memory to call up later for quick job setup. Up to
two different settings can be stored: job 1 (Jb1) and job 2 (Jb2).
Note
No jobs can be stored while the copier is warming up or is in the Interrupt mode.
Job Storing Procedure
1 Set up the job you want to store in memory.
2 Press the [JOB STORE] key.
3 Check that “Jb1” appears on the Display.
If you want your job stored as “Jb2,” change it on the
Display.
Do you know how to change the contents of the
Display?
?
➜
Each time the [JOB STORE] key is pressed, the
Display alternates between “Jb1” and “Jb2.”
Do you know what happens if another job has already been stored in the job number
selected?
?
➜
Storing a new job will erase the old one.
4 Press the [ENTER] key.
7-30
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
5 The Display changes as shown on the right, indicating
that the job has been stored in Jb1.
Konica 7115/7118
7-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Utility Mode
7
Recalling a Job from Memory
1 Position the original.
❍
Original Loading (p.4-1)
2 Press the [JOB RECALL] key to show the job number to
be recalled on the Display.
3 Check that the Display shows the job number you want.
Do you know how to change the contents of the
Display?
?
➜
Each time the [JOB RECALL] key is pressed, the
Display alternates between “Jb1” and “Jb2.”
4 Press the [ENTER] key.
5 Press the [START] key.
7-32
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
8
Error Displays and Other Indicators
8.1
Major Error Displays and Remedial Actions
Error Display
Possible Cause
Action
Toner has run out and the copier is no
longer able to make copies.
Install a new Toner Bottle. “Replacing the
Toner Bottle” (p.8-8)
Paper of good size is not available for the Load the paper indicated by the blinking
copy cycle in the Auto Paper mode.
paper size indicator, or press the [SIZE] key
to select another paper size.
A paper misfeed has occurred in the
copier.
Identify the misfeed location on the control
panel and remove the sheet of misfed
paper. “Clearing a Paper Misfeed” (p.8-12)
A paper (original) misfeed has occurred Identify the misfeed location on the control
in the Automatic Document Feeder.
panel and remove the sheet of misfed
paper. “Clearing a Paper Misfeed” (p.8-18)
A sheet of misfed paper is left in the
copier.
Identify the misfeed location on the control
panel and remove the sheet of misfed
paper. “Clearing a Paper Misfeed” (p.8-12)
Konica 7115/7118
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
Error Display
Possible Cause
Action
A sheet of paper is left on the Manual
Bypass Tray.
Remove the paper from the Manual Bypass
Tray.
Copier cover is left open or not closed in Identify the closure failure location on the
position.
control panel and close the cover in
position.
The Automatic Document Feeder is in a Properly lower the Automatic Document
raised position.
Feeder into position.
The Document Feeder Cover (Doc.
Close the Document Feeder Cover (Doc.
Feed Cover) of the Automatic Document Feed Cover) in position.
Feeder is open.
Memory is full when the image data is
read.
Press the [AUTO RESET] key. Or, turn
OFF, then ON, the Power Switch. (This will
erase all data that has so far been read.)
Memory is full when image data is
received from the personal computer.
Press the [AUTO RESET] key. Or, turn
OFF, then ON, the Power Switch. (This will
erase all image data that has so far been
received.)
A size error has occurred with the paper Press the [CLEAR] key, slide out the tray in
loaded in the tray.
which the size error has occurred, and slide
it back into the copier.
Check the paper size set with Custom Size
Input and carry out the Custom Size Input
procedure once again.
The Plug-In Counter is not plugged in.
Plug in the Plug-In Counter.
The numerical value entered falls
outside the setting range.
Check the value and enter the correct one
as necessary.
The scheduled maintenance time has
arrived.
Call your authorized Konica Service
Representative.
The Imaging Unit needs replacement.
Call your authorized Konica Service
Representative.
8-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
Error Display
Possible Cause
Action
A malfanction has occurred in the copier. Call your authorized Konica Service
Representative.
E.g.: C0510 Fusing
malfunction
Konica 7115/7118
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
8.2
When the Add Paper Indicator Lights
If paper runs out during a copy cycle, the Add Paper indicator lights up and the copy cycle is
stopped.
Identify the specific tray that has run out of paper on the control panel. Then, following the
procedure given in “Adding Paper” below, add paper as necessary.
Adding Paper
<1st Tray>
1 Slide out the 1st Tray.
Paper Take-Up Roll
Do you know the special precautions to be used when
the tray has been slid out?
?
➜
Be careful not to touch the surface of the Paper Take-
Up Roll.
2 Press down on the Paper Lifting Plate until it clicks into
Paper Lifting Plate
the locked position.
8-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
3 Load the paper in the tray so that the front side of the
paper (the side facing up when the package was
unwrapped) faces up.
Have you loaded too much paper in the tray?
?
➜
Do not load so much paper that the top of the stack is
higher than the Ä mark.
4 Slide the Edge Guide and Trailing Edge Stop against the
edges of the paper stack.
Do you know the special precautions to be used when
loading paper?
?
➜
Be sure that the Edge Guide and Trailing Edge Stop
are pressed tightly up against the edges of the paper
stack.
5 Slide the tray back into the copier.
Konica 7115/7118
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
<2nd Tray>
The same procedure applies when loading paper in the 3rd Tray, 4thTray, and 5th Tray.
1 Slide out the 2nd Tray.
2 Press down on the Paper Lifting Plate until it clicks into
Paper Lifting Plate
the locked position.
3 Load the paper in the tray so that the front side of the
paper (the side facing up when the package was
unwrapped) faces up.
Have you loaded too much paper in the tray?
?
➜
Do not load so much paper that the top of the stack is
higher than the Ä mark.
4 Slide the Edge Guide and Trailing Edge Stop against the
edges of the paper stack.
Do you know the special precautions to be used when
loading paper?
?
➜
Be sure that the Edge Guide and Trailing Edge Stop
are pressed tightly up against the edges of the paper
stack.
5 Slide the tray back into the copier.
8-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
<Multiple Bypass Tray>
1 Load the paper in the Bypass Tray.
Do you know the special precautions to be used when
loading the paper?
?
➜
Be sure to face the surface to be copied onto down.
➜
Do not load so much paper that the top of the stack is
higher than the Ä mark.
➜
Be sure to smooth any curl in the paper before loading
it.
2 Adjust the Paper Guides and the Bypass Tray Extender to
the size of the paper.
Konica 7115/7118
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
8.3
When the Add Toner Indicator Lights
When toner is low, the Add Toner indicator lights up as shown in the illustration. Replace the
Toner Bottle with a new one as soon as possible.
Note
Use only the toner that has been manufactured specifically for this copier. Never use any
other types of toner, as a malfunction could result. For details, ask your authorized Konica
Service Representative.
Do not throw away, but keep, the used Toner Bottle, which will be collected by your
authorized Konica Service Representative.
Replacing the Toner Bottle
1 Open the Front Cover.
2 Pull the Toner Bottle Holder to the front and gently pull out
the used Toner Bottle.
8-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
3 Sharply tap the new Toner Bottle against a desk or other
hard surface four or five times. Then turn the Toner Bottle
upside down and tap it the same way again.
❍
Be sure to carry out this procedure, as toner can be
caked in the bottle.
4 Shake the new Toner Bottle well.
5 With the “UP” marking on top, insert and push the bottle
into position.
Do you know how much you need to insert the bottle?
?
➜
Fit the protrusion on the Toner Bottle all the way into
the recess in the holder as illustrated.
6 With the seal on the Toner Bottle facing up, slowly peel off
the seal as illustrated.
Do you know the special precautions to be used when
peeling off the seal?
?
➜
Slowly peel off the seal, as some toner may puff out
from the bottle.
Konica 7115/7118
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
7 Push the Toner Bottle Holder back in and then close the
Front Cover.
❍
Toner will be automatically supplied as soon as the
Front Cover is closed.
Do you know what to do if the copy image density is
still low immediately after the Toner Bottle has been
replaced with a new one?
?
➜
Run “Toner Replenisher” in the Utility Mode. (p.7-13)
8-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
8.4
When the Paper Misfeed Indicator Lights
If a paper misfeed occurs during a copy cycle, the Paper Misfeed indicator lights and the copy
cycle is stopped.
Misfeed Indications and Misfeed Locations
A blinking indicator indicates that there is a misfed sheet of paper.
isolate the location, then clear the misfeed according to the procedure applicable to the misfeed
occurring at that particular location. Please refer to the corresponding pages.
Automatic Document Feeder
p.8-18
Bypass Tray
p.8-16
Inside the Copier: p.8-12
1st Tray
p.8-12
2nd Tray
p.8-15
3rd Tray
4thTray
5thTray
Konica 7115/7118
8-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
Clearing a Paper Misfeed
<Inside the Copier>
CAUTION
The area around the Fusing Unit is extremely hot.
➜
To reduce the risk of burns, do not touch any area other than the authorized knobs.
CAUTION
There are a number of protrusions on the backside of the guide plate.
➜
To avoid possible injury, be careful not to touch any areas other than the paper.
1 Open the Side Cover of the copier.
2 Unlock the Lock Release Lever of the Fusing Unit.
Do you know how to unlock the Lock Release Lever?
?
➜
Grasp the green lever to unlock the Lock Release
Lever.
Pressure Lever
8-12
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
3 Gently pull out the sheet of paper.
4 Lowering the guide plate, gently pull out the sheet of
paper.
Do you know which part to grasp?
?
➜
Grasp the green portions to lower the guide plate.
5 Turning the knob of the roller in the direction of the arrow,
gently pull out the sheet of paper.
Do you know which part to grasp to turn the roller?
?
➜
Be sure to grasp the green knob to turn the roller.
6 Lock the Lock Release Lever into position.
7 Close the Side Cover of the copier.
Konica 7115/7118
8-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
8 Slide out the 1st Tray and remove the paper stack left in
it. Reload the paper stack in the 1st Tray.
9 Slide the Edge Guide and Trailing Edge Stop against the
edge of the paper stack.
Are you informed of special precautions to be used
when loading paper?
?
➜
Be sure that the Edge Guide and Trailing Edge Stop
are pressed tightly up against the edges of the paper
stack.
10 Slide the 1st Tray back into the copier.
8-14
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
<Multiple Bypass Tray>
1 Unload the paper stack from the Bypass Tray.
2 Open the Side Cover of the copier.
3 Gently pull out the sheet of misfed paper.
4 Close the Side Cover.
8-16
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
5 Load the paper stack back in the Bypass Tray.
Konica 7115/7118
8-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
4 Turning the document feed knob in the direction of the
arrow, gently pull out the original.
5 Close the Document Feeder Cover.
6 Reload the document which was unloaded in step 2.
Do you know what to do if “-1” is shown on the
Display?
?
➜
Merge the misfed original with the remaining pages for
reloading.
Konica 7115/7118
8-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Displays and Other Indicators
8
8-20
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Tips
9
9
Troubleshooting Tips
9.1
When This Type of Copy is Produced
Symptom
Possible Cause
Action
The image is too light.
The image density is set at “Lighter.”
side. (p.5-16)
The paper is damp.
Change the paper. (p.8-4)
The image is too dark.
The image density is set at “Darker.”
Adjust the image density to the lighter
side. (p.5-16)
The original is not placed firmly
against the Platen Glass.
Place the original in position so that it
Glass. (p.4-7)
The copy is blurry.
The paper is damp.
Change the paper. (p.8-4)
The original is not placed firmly
against the Platen Glass.
Place the original in position so that it
is placed firmly against the Platen
Glass. (p.4-7)
The copy has lines.
The Platen Glass surface is dirty.
The Original Pad is dirty.
soft dry cloth. (p.10-5)
Wipe the Original Pad clean with a soft
cloth dampened with neutral
detergent. (p.10-5)
The copy has dark specks or spots.
The original is highly transparent.
The original is 2-sided.
Place a blank sheet of paper over the
original. (p.4-8)
The information on the backside of a
2-sided, thin original may be slightly
reproduced on the copy. Adjust the
image density to the lighter side. (p.5-
16)
Konica 7115/7118
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Symptom
Possible Cause
Action
The edge of the copy is dirty.
The Original Pad is dirty.
Wipe the Original Pad clean with a soft
cloth dampened with neutral
detergent. (p.10-5)
You have selected paper of a size
larger than the original (when the
zoom ratio is full size).
Select the same paper size as the
original. (p.5-4)
Or, use Auto Size to enlarge the copy
The original is not placed in the correct Select the same paper size as the
position (when the zoom ratio is full
size).
original. Or, reload the paper in the
same direction as the original.
The reduction ratio selected is not in
accord with the paper size (when the
copy is made at a manually adjusted
reduction ratio).
Select the zoom ratio according to the
paper size. (p.5-13) Or, use Auto Size
to reduce the copy to the appropriate
size. (p.5-12)
The image on the copy is not aligned The original is not placed in the correct Place the original correctly on the
properly.
position.
Platen Glass against the Original
Scales. (p.4-7)
Or, load it in the Automatic Document
Feeder correctly along the Document
Guide Plates. (p.4-3)
The original may not be suitable for
use in the Automatic Document
Feeder.
Raise the Automatic Document
Feeder and place the original on the
Platen Glass correctly against the
Original Scales. (p.4-7)
The Edge Guide and Trailing Edge
Stop are not pressed up against the
paper stack in the tray.
Slide the Edge Guide and Trailing
Edge Stop up against the edges of the
paper stack.
The paper has an excessive curl.
Smooth out curl in the paper and
reload the paper stack in the tray.
9-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Tips
9
9.2
When the Copier is not Operating Correctly
Symptom
Possible Cause
Action
Nothing is indicated on the control
panel.
Only the [START] key lights green.
The copier is in the Power Saver
mode. Press any key on the control
panel to leave the mode. (p.3-18)
The Auto Shut OFF function has been Turn OFF, then ON, the PowerSwitch.
activated.
(p.3-15)
The [START] key does not light green. An account number has not been
entered.
to the procedure given in “To enter an
account number.” (p.3-20)
No copies are produced even when
the [START] key is pressed.
An icon on the control panel is lit.
The copier is still warming up.
The Interrupt indicator is lit.
Take necessary action to correct the
problem indicated by the lit icon. (p.3-
14, p.8-1)
The copier takes about 30 seconds to
complete warming up after it has been
turned ON.
Keys on the control panel do not
respond.
The copier is in an interrupt mode.
Press the [INTERRUPT] key to leave
the interrupt mode. (p.3-19)
The copier cannot be turned ON.
The power cord is unplugged from the Plug the power cord into the power
power outlet.
outlet.
The room’s circuit breaker is tripped.
Close the room’s circuit breaker.
Konica 7115/7118
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Tips
9
9-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
10 Appendix
10.1 Specifications
Copier Konica 7115/7118
Specifications
Type
Konica 7115
Desktop
Konica 7118
Platen Type
Stationary
OPC
Photo conductor
Copying System
Developing System
Fusing System
Resolution
Electrostatic Dry Powdered Image Transfer to Plain Paper
Dry, 2-Component Magnetic Brush Developing
Lamp-Heated Roller
600dpi
Types of Original
•
•
•
Sheets, Books and other three-dimensional objects
Maximum Original Size: 11×17 in.
Maximum Original Weight: 6-1/2 lbs.
Kinds of Paper
Plain paper (16 lbs. to 24 lbs.), recycled paper: 16 lbs. to 24 lbs.
Special paper: card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards,
labels
•
Special paper can only be used for the 1st Tray and Bypass Tray.
Copy Paper Size
•
1st Tray
11x17L to Invoice
Bypass Tray
•
Width: 3-9/16 in. to 11-3/4 in.
Length: 5-1/2 in. to 17 in.
Paper Feeding System
•
•
1st Tray
Plain paper,recycled paper: 250 sheets
Special paper: 50 sheets
Bypass Tray
Plain paper,recycled paper, special paper: 1 sheet
Warm-Up Time
First Copy
30 seconds or less (at room temperature 73.4°F/23°C)
7 seconds or less (when LetterC and 1st Tray are used)
Copy Speed
(Approx. copies/min)
9 (LedgerL), 11 (LegalL), 13 (LetterL),
15 (LetterC)
11 (LedgerL), 12 (LegalL), 15 (LetterL),
18 (LetterC)
Zoom Ratios
Full size: 100%
Enlargement ratios: 129%, 155%, and 200%
Reduction ratios: 77%, 64%, and 50%
Variable ratios: 50% to 200% (in 1% increments)
Multiple Copies
Exposure Control
Lost Image
1 to 99 copies
Auto Exposure Mode, Manual Exposure Mode and Photo Manual Exposure Mode
Leading Edge: 1/6 in. (4 mm)
Trailing Edge: 1/6 in. (4 mm)
Rear Edge: 1/6 in. (4 mm)
Front Edge: 1/6 in. (4 mm)
Power Requirements
Power Consumption
120V, 12 A, 60 Hz
1.5 kW or less
Konica 7115/7118
10-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
Specifications
Konica 7115
Konica 7118
Dimensions
Width: 23-1/4 in. (590 mm)
Depth: 24 in. (611 mm)
Height: 19-1/4 in. (487 mm)
Weight
85 lbs.
16MB
Standard memory
10-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
Automatic Document Feeder DF-217
Specifications
Document Feeding System
Standard Mode: 1-sided original
Mixed Original Detection Mode:1-sided original
Kinds of Original
Standard Mode: Plain paper (13-1/4 lbs. to 29-1/4 lbs.)
Mixed Original Detection Mode: Plain paper (16 lbs. to 24 lbs.)
Original Size
Standard Mode: 11×17L to InvoiceL
Mixed Original Detection Mode: A possible combination is 11×17L and 8.5×11C,or
8.5×14L and 8.5×11L
Capacity of Document Feeder
Tray
Max. 50 sheets (16 lbs.)
Power Consumption
Dimensions
36 W or less
Width: 23-7/10 in. (602.5 mm)
Depth: 19-4/5 in. (502 mm)
Height: 4-1/3 in. (110 mm)
Weight
13-3/4 lbs.
Paper Feed Cabinet PF-121
Specifications
Kinds of Paper
Paper Size
Plain paper (16 lbs. to 24 lbs.), recycled paper
11×17L to 5.5×8.5
250 sheets
Capacity
Power Consumption
Dimensions
9 W or less
Width: 21 in. (535 mm)
Depth: 22-1/3 in. (568 mm)
Height: 5-2/5 in. (137 mm)
Weight
12-1/4 lbs.
Konica 7115/7118
10-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
Shifting Unit IS-101
Specifications
Shift Position
Capacity
1.1 in.
250 sheets
63 W or less
Dimensions
Job Tray IT-102
Specifications
Kinds of Paper
Plain paper (16 lbs. to 24 lbs.), recycled paper
Special paper: card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards, la-
bels
Capacity
<Upper Copy Tray>
•
Plain paper, recycled paper: 8-1/2×11 150 sheets, sizes other than 8-1/2×11 75
sheets
•
Special paper: 20 sheets
<Lower Copy Tray>
•
Plain paper, recycled paper: 8-1/2×11 100 sheets, sizes other than 8-1/2×11 50
sheets (max. height 7/8 in.)
Dimensions
63 W or less
Multiple Bypass Tray MT-102
Specifications
Kinds of Paper
Plain paper: (16 lbs. to 24 lbs.), recycled paper
Special paper: card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards, la-
bels
Paper Size
Capacity
Width: 3-9/16 in. to 11-11/16 in.
Length: 5-1/2 in. to 17 in.
Plain paper, recycled paper: 50 sheets
Special paper: 20 sheets
Power Consumption
Dimensions
9 W or less
Width: 17-1/4 in. (436 mm)
Depth: 19-1/4 in. (489 mm)
Height: 5-2/5 in. (137 mm)
Weight
Approx. 6 lbs.
10-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
10.2 Care of the Copier
Cleaning
Turn OFF the copier before cleaning it.
Housing Cover
➜
Wipe the surface of the housing cover with a soft cloth
dampened with a mild household detergent.
Original Pad
➜
Wipe the surface of the Original Pad clean with a soft cloth dampened with alcohol.
Platen Glass
➜
Wipe the surface of the Platen Glass clean with a soft, dry
cloth.
Control Panel
➜
Wipe the surface of the control panel clean with a soft, dry
cloth.
Do you know if detergent can be used for cleaning?
?
➜
NEVER use household detergent or glass cleaner, as
damage to the control key will result.
Konica 7115/7118
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
10.3 Function Combination Table
Function Combination Table
Function Set Last
Conditions for Combined Functions
Code
Description
The functions can be combined.
2
The functions cannot be combined. (The function set first takes precedence.)
●
×
The functions cannot be combined. (The function set last takes precedence.)
The function set first takes precedence if paper is loaded in the Bypass Tray.
Has no bearing.
A
-
10-6
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
10.4 List of Paper Sizes and Zoom Ratios
Paper Sizes
Name
Size (Metric)
Size (Inch)
12-1/4 × 18
11-3/4 × 16-1/2
8-1/4 × 11-3/4
5-3/4 × 8-1/4
4-1/4 × 5-3/4
10 × 14-1/4
7-1/4 × 10
A3Wide
311 mm × 457 mm
297 mm × 420 mm
210 mm × 297 mm
148 mm × 210 mm
105 mm × 148 mm
257 mm × 364 mm
182 mm × 257 mm
128 mm × 182 mm
100 mm × 148 mm
A3
A4
A5
A6
B4
B5
B6
5 × 7-1/4
POSTCARD
4 × 5-3/4
Name
Size (Inch)
11 × 17
Size (Metric)
Ledger
279 mm × 432 mm
279 mm × 356 mm
257 mm × 356 mm
254 mm × 356 mm
236 mm × 356 mm
216 mm × 356 mm
216 mm × 330 mm
203 mm × 330 mm
220 mm × 330 mm
210 mm × 330 mm
210 mm × 301 mm
216 mm × 279 mm
203 mm × 267 mm
203 mm × 254 mm
140 mm × 216 mm
11 × 14
11 × 14
Computer
10 × 14
10-1/8 × 14
10 × 14
9-1/4 × 14
Legal
9-1/4 × 14
8-1/2 × 14
8-1/2 × 13
8 × 13
Foolscap
Foolscap
Foolscap
Foolscap
8-1/4 × 11-3/4
Letter
Government Legal
8-2/3 × 13
8-1/4 × 13
8-1/4 × 11-3/4
8-1/2 × 11
8 × 10-1/2
8 × 10
Folio
Government Letter
Quarto
Statement
Invoice
5-1/2 × 8-1/2
Konica 7115/7118
10-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
Zoom Ratios(Original Size to Paper Size)
Metric Areas
Original Size
Paper Size
A4
Zoom Ratio
70%
A3
297 mm × 420 mm
11-3/4 × 16-1/2
A5
50%
B4
86%
B5
61%
A4
A5
70%
210 mm × 297 mm
8-1/4 × 11-3/4
A6
50%
B5
86%
B6
61%
A3
141%
122%
70%
B4
A5
A6
148 mm × 210 mm
5-3/4 × 8-1/4
B6
86%
A4
141%
200%
173%
122%
200%
141%
173%
122%
81%
A3
B4
B5
A6
A4
105 mm × 148 mm
4-1/4 × 5-3/4
A5
B5
B6
B4
A4
257 mm × 364 mm
10 × 14-1/4
A5
57%
B5
70%
B6
50%
A3
115%
10-8
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
Metric Areas
Original Size
Paper Size
Zoom Ratio
81%
B5
A5
A6
B6
A3
A4
B4
A6
A4
A5
B4
B5
182 mm × 257 mm
7-1/4 × 10
57%
70%
163%
115%
141%
81%
B6
128 mm × 182 mm
5 × 7-1/4
164%
115%
200%
141%
Inch Areas
Original Size
Paper Size
11 × 17
Legal
Zoom Ratio
82%
Ledger
11 × 17
279.4 mm × 431.8 mm
77%
Foolscap
Letter
75%
64%
Invoice
11 × 14
Legal
50%
93%
11 × 15
279.4 mm × 381 mm
77%
Foolscap
Letter
77%
73%
Invoice
Legal
50%
11 × 14
77%
279.4 mm × 355.6 mm
Foolscap
Letter
77%
77%
Invoice
Foolscap
Letter
50%
Legal
8-1/2 × 14
215.9 mm × 355.6 mm
92%
78%
Invoice
11 × 17
Letter
60%
121%
84%
Foolscap
8-1/2 × 14
215.9 mm × 330.2 mm
Letter
Invoice
11 × 17
11 × 14
Invoice
65%
130%
107%
64%
Konica 7115/7118
10-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
10
Inch Areas
Original Size
Paper Size
11 × 17
Zoom Ratio
129%
8-1/2 × 11
215.9 mm × 279.4 mm
11 × 14
127%
Invoice
5-1/2 × 8-1/2
139.7 mm × 215.9 mm
11 × 17
11 × 14
Legal
200%
164%
154%
150%
129%
Foolscap
Letter
*
Zoom Ratio = Paper Size ÷ Original Size
1 Inch = 25.4 mm
1 mm = 0.0394 Inch
10-10
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
2 in 1 .................................................................................................................................... 6-1
4 in 1 .................................................................................................................................... 6-1
A
Account Number ................................................................................................................ 3-20
Adding Paper ....................................................................................................................... 8-4
Adjusting the Image Density .............................................................................................. 5-16
Administrator Mode ........................................................................................................... 7-16
Auto Copy Start ................................................................................................................. 3-18
Auto Panel Reset ............................................................................................................... 3-17
Auto Shut-OFF .................................................................................................................. 3-18
B
C
Care of the Copier ............................................................................................................. 10-5
Change Account Procedure .............................................................................................. 7-22
CLEAR ............................................................................................................................... 3-13
Clearing a Paper Misfeed .................................................................................................. 8-12
Control Panel ..................................................................................................................... 3-12
COUNTER ......................................................................................................................... 7-28
Custom Size Input (Bypass Tray) ........................................................................................ 5-9
Custom Size Input Procedure (1st Tray) ........................................................................... 7-14
D
Default Settings ................................................................................................................. 3-16
E
ENTER .............................................................................................................................. 3-13
F
Feeding Paper Manually ...................................................................................................... 5-5
Function Combination Table .............................................................................................. 10-6
Konica 7115/7118
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
G
Grouping ..............................................................................................................................6-8
I
Icons on the Control Panel .................................................................................................3-14
IMAGE SHIFT ....................................................................................................................6-14
Input Account Procedure ...................................................................................................7-20
Interrupting a Copy Job ......................................................................................................5-18
Interrupting Copy Jobs .......................................................................................................3-19
L
List of Paper Sizes and Zoom Ratios .................................................................................10-7
Loading Originals .................................................................................................................4-1
M
Major Error Displays and Remedial Actions .........................................................................8-1
Margin Erase ......................................................................................................................6-10
Misfeed Indications and Misfeed Locations .......................................................................8-11
Mixed Originals ....................................................................................................................4-4
O
Output Copies (Sort and Group) ..........................................................................................6-5
P
Panel Resetting ..................................................................................................................3-17
Paper Type ..........................................................................................................................7-9
Photo mode ........................................................................................................................5-16
R
Ratios set using Zoom ([ ][ ]) key ..................................................................................5-11
Replacing the Toner Bottle ..................................................................................................8-8
Reverse Image ...................................................................................................................6-13
S
Selecting the Paper ..............................................................................................................5-3
Setting the Zoom Ratio ......................................................................................................5-12
Sorting ..................................................................................................................................6-6
Special Paper Setting ..........................................................................................................7-9
Specifications .....................................................................................................................10-1
Index-2
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Specifying the Zoom Ratio ................................................................................................ 5-11
Storing a Job ..................................................................................................................... 7-30
T
Toner Replenisher (Auxiliary Toner Replenishing) ............................................................ 7-13
Turn the Copier ON/OFF ................................................................................................... 3-15
U
User’s Choice ...................................................................................................................... 7-2
Using “APS” ......................................................................................................................... 5-3
W
When the Copier is not Operating Correctly ........................................................................ 9-3
When This Type of Copy is Produced ................................................................................. 9-1
X
X/Y Zoom ........................................................................................................................... 5-11
Konica 7115/7118
Index-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index-4
Konica 7115/7118
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Konica Business Technologies, Inc.
500 Day Hill Road Windsor, CT 06095
Telephone (860) 683-2222
OP-7115/7118-01
Printed in Japan
July 2001
Download from Www.Somanuals.com. All Manuals Search And Download.
|