Kompernass DVD Player KH6525 User Manual

HOME TECH  
6
DVD Player  
KH 6525  
KH 6524  
DVD Player  
Operating instructions  
KOMPERNASS GMBH  
BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: KH6524/6525-04/10-V4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
PAGE  
1. Technical Data  
2
2
2
2
3
3
4
2. Intended use  
3. Package contents  
4. Operating components  
5. Setting up of the DVD player  
6. Safety instructions  
7. Remote control  
7.1 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
7.2 Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
7.3 Replacing the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
8. Connecting the DVD player to a television  
4
8.1 Connecting to a television via ScartCable/RGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
8.2 Connecting to a television via S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
8.3 Connection to a television via video input (Composite Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
8.4 Connecting via component signal (YPbPr/YUV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
8.5 Connecting to a television via HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
9. Connecting audio components to the DVD player  
6
9.1 Requirements for the connection of a HiFi system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
9.2 Connecting digital audio components via digital cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
9.3 Connecting audio components via an analogue cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
9.4 Connecting the headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
10. OSD menu settings  
8
10.1 Using the OSD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
10.2 Setup menu GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
10.3 Setup menu AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
10.4 Setup menu DOLBY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
10.5 Setup menu VIDEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
10.6 Setup menu PREFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
11. Initial operation of the DVD player  
12  
11.1 Switching the DVD player on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
11.2 Inserting the DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
11.3 Inserting memory cards/USB memory sticks with MP3/WMA/ MPEG4/JPEG data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
11.4 Removing memory cards/USB memory sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
12. Playing back DVDs, VCDs or S-VCDs  
13  
12.1 Features during playback of a DVD, VCD or S-VCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
13. Playback of JPEG-Photo CD/WMA/MP3/MPEG4  
14. CD Ripping function  
15. Cleaning of the DVD player  
16. Disposal  
18  
19  
19  
19  
20  
21  
22  
22  
17. Troubleshooting  
18. Glossary / Key Word Index  
19. Warranty and Service  
20. Importer  
Read these operating instructions carefully before using the device for the first time and preserve this manual for later reference.  
Pass this manual on to whoever might acquire the device at a future date.  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD PLAYER KH6524/25  
2. Intended use  
This documentation is copyright protected.  
The SilverCrest KH 6524/25 DVD player is intended exclusively for stationary  
use in enclosed spaces. The device is intended exclusively for private,  
non-commercial use.  
The device is intended for use as a home entertainment device.  
No liability/warranty will be accepted for damages that result from improper  
use of the device or from unauthorised reconstruction!  
Any duplication and/or reproduction, wholly or partially including extracts  
as well as the reproducing of illustrations also in modified form is only permit-  
ted with written agreement from the manufacturer.  
1. Technical Data  
This device conforms regarding compliance to the basic requirements and  
other relevent provisions of the low-voltage directive 2006/95/EC, the  
EMV directive 2004/108/EC as well as the Ecological design directive  
2009/125/EC (Ordinance 1275/2008) Supplement II, Number 1).  
3. Package contents  
-
-
-
-
-
-
-
DVD Player  
Infrared remote control  
2 Batteries for remote control, type AAA/ (Micro cells)  
RGB Scart cable  
Audio/Video RCA Cinch cable  
HDMI cable  
Power supply:  
Power consumption:  
Power consumption:  
Standby:  
Protection class:  
TV standard:  
AC 220 V - 240 V 50 Hz  
~
max. 20 Watt  
< 1 W  
II /  
Operating manual  
PAL/NTSC  
Operating temperature:  
Humidity:  
Measurements  
(L x W x H):  
Weight :  
Laser class:  
+5 +40°C  
4. Operating components  
~
5
90% (no condensation)  
~
22,3 x 43 x 4,5 cm  
1,65 kg approx.  
1
A. DVD player front panel  
Disc tray  
q
w
e
r
t
y
u
i
o
Display (with standby LED and IR sensor for remote control)  
OPEN/CLOSE  
PLAY/PAUSEbutton  
STOP button  
STANDBY  
Headphones output for 3,5 mm jackplug  
USB port  
Memory card slot for SD/MMC/MS and MSPro cards  
button  
Video Output  
Format:  
Decoder:  
4:3 / 16:9  
MPEG 2  
12 Bit  
button  
D/A converter:  
Audio Output  
Decoder:  
MPEG Dolby Digital (AC-3)  
DTS only possible with additional external decoder  
24 Bit / 96 kHz  
B. DVD player rear panel  
D/A converter:  
Power cable  
POWER switch  
a
s
d
f
g
h
j
k
l
;
2)  
2!  
2@  
2#  
USB port  
Readable  
VIDEO: Composite video output  
Y, U/Pb, V/Pr: Component video outputs  
SCART: Scart/RGB output  
FL/FR: Output for front, left and right audio channels  
SL/SR: Output for rear, left and right audio channels  
SW: Output for bass audio channel  
CEN: Output for front and centre audio channels  
COAXIAL: Coaxial audio output  
AUDIO L/R: Left and right audio outputs  
HDMI: HDMI output  
USB memory sticks:  
Max. current output:  
USB1.1 and 2.0 up to a capacity of 4 GB  
100 mA  
Memory card slot  
Readable memory cards: SD (2 GB no SDHC), MS/MSPro (4 GB),  
MMC (4 GB)  
Headphones output  
Jackplug:  
Maximum  
output voltage:  
3,5 mm  
130 mV  
OPTICAL: optical digital audio output  
S-VIDEO: S-Video output  
Playable mediums/formats  
VIDEO:  
DVD, DVD+R, DVD+RW, DVD-R, DVD-RW,  
DVD-R DL, DVD+R DL, VCD, S-VCD  
CD, CD-R, CD-RW, Audio-DVD, MP3, WMA,  
OGG Vorbis  
Audio:  
Additional formats:  
Regional code:  
AVI, MPEG 4, Xvid, JPEG (Foto-CD)  
or  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C. Remote control  
6. Safety instructions  
OPEN/CLOSE : Open/Close the disc tray  
Number buttons  
q
w
e
r
t
y
u
i
o
a
s
d
f
g
h
j
k
l
;
2)  
2!  
2@  
2#  
2$  
2%  
2^  
2&  
2*  
2(  
3)  
3!  
3@  
3#  
3$  
This device is not intended for use by individuals (including children)  
with restricted physical, physiological or intellectual abilities or deficiences  
in experience and/or knowledge unless they are supervised by a person  
responsible for their safety or receive from this person instruction in how  
the device is to be used.  
DISPLAY: Superimpose disc information  
DIMMER: Adjust the display brightness  
V-MODE: Set the video output  
STOP: Stop playback  
PLAY/PAUSE: Start/Suspend playback  
Children should be supervised to ensure that they do not play with the  
device.  
To avoid unintentionally switching on the device pull the power cord  
from the mains supply after use and before cleaning.  
Check the device and all parts for visible damages. The safety concept  
can work only if the device is in a faultless condition.  
The power plug must always be easily accessible, so that the device can  
be quickly disconnected from the mains in the event of an emergency.  
SKIP FWD  
Chapter skip forwards  
VOL +/- : Raise/lower the sound level  
FAST FWD: Fast search forward  
SUBTITLE: Set the subtitle  
ENTER: Confirm input  
Control buttons ꢄꢀꢅꢆ  
MENU/RIPPING: Access disc menu/ripping function  
SLOW: Slow motion function  
RETURN: Set the playback mode  
ZOOM: Set the image enlargement  
PROG: Access the programme function  
A-B: Repeat sequence  
Risk of electrical shocks!  
Connect the device only to correctly installed and earthed mains sockets.  
Ensure that the rating of the local power supply tallies completely with  
the details given on the rating plate of the device.  
Battery compartment (on the rear panel)  
PBC: PBC function activate/deactivate (VCD, SVCD only)  
USB: Change between disc playback and USB/card playback  
STEP: Individual frame playback  
L/R/ST: Set the audio channel  
Arrange for defective power plugs and/or cables to be replaced at  
once by qualified technicians or our Customer Service Department.  
Arrange for customer service to repair or replace connecting cables  
and/or devices that are not functioning properly or have been damaged.  
Never immerse the device in water. Wipe it only with a slightly damp  
cloth.  
AUDIO: Set the audio language  
TITLE: Access the title menu  
Do not expose the device to rain and never use it in a humid or wet  
environment.  
FAST RWD: Fast search backwards  
SKIP BWD  
Ensure that the power cable never becomes wet during operation.  
You must not open the housing or repair the device yourself.  
Should you do so, device safety can no longer be assured and the  
warranty will become void.  
Chapter skip backwards  
MUTE : Switch the sound on/off  
REPEAT: Set the repeat function  
ANGLE: Change the camera perspective  
SETUP: Access the OSD menu  
Protect the device against drip and spray water. Do not place any  
water-filled vessels (e.g. flower vases) on the device.  
GOTO:Access titles, chapters and time direct select menus  
STANDBY : Switch the device to standby mode  
Risk of fire!  
Do not use the device in the vicinity of hot surfaces.  
Do not locate the device in places exposed to direct sunlight.  
If you do, it may overheat and become irreparably damaged.  
Do not leave the device unattended when in use.  
Never cover the ventilation slots of the device while it is being used.  
Do not place any open sources of fire, like candles, on the device.  
5. Setting up of the DVD player  
1. Carefully remove the DVD player and the supplied accessories from  
the packing.  
2. Remove the protective foil from the display.  
3. Place the DVD player on a flat, even and firm base. Do not subject the  
device to any external heat or moisture source. Make sure that the device  
has sufficient ventilation on all sides. Do not place any television directly  
on top of the DVD player.  
Injury hazard!  
Keep children away from the connecting cable and the device.  
Children frequently underestimate the dangers of electrical equipment.  
Ensure that the device stands with a safe and secure positioning.  
Do not operate the device if it has sustained a fall or is damaged.  
Arrange for the device to be checked and/or repaired by qualified  
technicians.  
Attention!  
Do not plug the DVD player into an electrical outlet at this time.  
Wait until you have connected the DVD player to a television set.  
Batteries/ battery cells are potentially fatal if swallowed. Store batteries  
out of the reach of children. If a battery is swallowed medical assistance  
must be sought immediately.  
Also, store the packaging foils well away from children. There is a risk  
of suffocation.  
In the event that you wish to change the type of video or audio connection  
you must first pull the power plug from the power socket! Otherwise the  
DVD player and possibly equipment connected to it could become  
irreparably damaged through voltage peak strikes!  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Danger! Laser radiation!  
This device is fitted with a „Class 1 Laser“.  
• Never open the device.  
7. Remote control  
7.1 Inserting the batteries  
• Never attempt to repair the device.  
1. Open the battery compartment on the rear of the remote control.  
2. Place the two supplied batteries type AAA (micro cells) into the battery  
compartment. Make sure that the batteries are inserted in accordance  
with the correct polarity.  
• There is invisible laser radiation inside the device.  
Do not expose yourself to the laser beam.  
Note:  
3. Replace the battery compartment cover.  
Some aggressive furniture finishes can have a destructive influence on the  
device's rubber feet. If necessary, place the device on a nonslip pad.  
7.2 Using the remote control  
In order to guarantee faultless operation when using the remote control…  
Thunderstorms!  
Always point the remote control, during use, directely at the DVD player  
Make sure that there are no obstructions between the remote control  
and the DVD player that will hinder reception.  
Equipment connected to a power supply can be damaged during a  
thunderstorm. You should therefore always pull the power plug from the  
power socket when there is a storm.  
When using the remote control place yourself not more than 5 metres  
from the DVD player  
Notice regarding electrical power surges  
(EFT / electrical fast transient) and electrostatic discharges:  
otherwise interferences can occur during operation of the DVD player functions  
with the remote control.  
In the case of malfunction due to an electrical fast transient (power surge)  
and/or electrostatic discharge, the device must be returned to default  
settings in order to re-establish normal operation. The power supply may  
have to be disconnected and then reconnected. The batteries (if present)  
must be removed and then reinserted.  
7.3 Replacing the batteries  
If the operation of the DVD player via the remote control does not function  
properly or does not function at all the batteries must be replaced  
Always renew all batteries in order to return the remote control to its full  
performance ability.  
Notice regarding disconnection from mains-power  
The POWER switch does not completely disconnect the device from  
the power network. Additionally, the device consumes power when in  
standby-mode. To completely disconnect the device from mains-power,  
the power plug MUST be removed from the wall socket.  
8. Connecting the DVD player to a television  
After setting up the DVD player, you can now connect it to a television.  
The DVD player can be connected to televisions which operate with the PAL  
and NTSC standards.  
If you want to use the DVD player on a television with the NTSC standard  
you must change the video setting in the DVD players "OSD menu". There  
PAL is set as the television standard at the factory. Depending on the televisions  
equipment there are different methods of connecting the DVD player to it,  
these are explained as follows.  
Information regarding the handling of batteries  
The remote control is operated by batteries.  
For the safe handling of batteries please observe the following safety  
information:  
Danger exists from uses other than those intended!  
Do not throw the batteries into a fire.  
Do not short circuit the batteries.  
Do not attempt to recharge the batteries.  
Regularly check the condition of the battery. Leaking battery acid can  
cause permanent damage to the device. When handling a damaged or  
leaking battery special care should be taken. Danger from acid burns!  
Wear protective gloves.  
Clean the battery compartment and the battery contacts with a dry cloth.  
Store batteries out of reach of children. When swallowed seek immediate  
medical attention.  
Remove the batteries from the device if you do not intend to use the device  
for an extended period of time.  
Never open batteries, never solder or weld batteries.  
The risk of explosions and injuries exists!  
Attention!  
No liability/warranty will be considered for damage to the DVD player  
caused by the effects of moisture, water penetration or overheating!  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.1 Connecting to a television via ScartCable/RGB  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/  
S-VIDEO .  
Note:  
Connecting the DVD player to a television with a Scart cable via the RGB input  
offers a high quality connection. Select this connection variation in the case of  
televisions equipped with an RGB input. If you are not sure if the television is  
equipped with an RGB input then you can check this by consulting the television's  
instruction manual.  
The menu option VIDEO OUTPUT is only selectable when the HDMI output  
is deactivated. On this subject see also chapter 10 "Settings in the OSD  
menu".  
8.3 Connection to a television via video input  
(Composite Video)  
For this connection variant the television must be equipped with Audio/Video  
cinch sockets (Composite Video).  
In order to connect the DVD player to a television via Composite Video you  
will need  
an audio/video RCA cinch cable (supplied)  
Connect the jack inscribed with SCART to a television Scart socket by  
using the supplied Scart cable.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select under the VIDEO/VIDEO OUTPUT/RGB or  
S-VIDEO menus.  
The menu option VIDEO OUTPUT is only selectable when the HDMI output  
is deactivated. On this subject see also chapter 10 "Settings in the OSD  
menu".  
Connect the yellow marked video socket with the yellow VIDEO socket on  
the television.  
Connect the audio output sockets AUDIO L/R on the rear panel of the  
DVD player to the corresponding audio inputs on the television. Make  
sure that the colour markings yellow, red and white correspond.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/  
S-VIDEO.  
8.2 Connecting to a television via S-Video  
Note:  
For this type of connection the television must have available an S-VIdeo input  
and two audio "IN" cinch sockets. If you are not sure if the television is equipped  
with S-Video and/or cinch sockets you can check this by consulting the television's  
instruction manual.  
The menu option VIDEO OUTPUT is only selectable when the HDMI output  
is deactivated. On this subject see also chapter 10 "Settings in the OSD  
menu".  
For this connection variant you will need:  
an audio cinch cable (not supplied)  
an S-video cable (not supplied) These can be obtained from your dealer.  
To connect the DVD player to a television via S-video:  
8.4 Connecting via component signal (YPbPr/YUV)  
This connection variant is only possible with very high grade televisions,  
LCD/Plasma screens or Video projectors.  
Check with the instruction manual of the corresponding playback device to  
see if this connections variant is available. It is possible that additional playback  
device settings may have to be implemented.  
The so called "Component signal" is put out via the YPbPr socket of the DVD  
player. Component signals are available in the form of the so called "YUV"  
signal (Half image) as well as in the form of the so called "YPbPr" signal  
(Full image/Progressive scan).  
On this topic, please refer to Section 18. "Glossary / KeyWord Index".  
Connect the jack inscribed with S-VIDEO to a television S-Video socket  
using an S-Video cable.  
Connect the audio output sockets AUDIO L/R on the rear panel of the DVD  
player via an audio cinch cable to the corresponding audio inputs on  
the television. Make sure that the red and white colour markings  
correspond.  
The cable connections are the same in both cases; YPbPr-signal for Progressive  
Scan however can only be used if the television (or Video projector), to which  
you want to connect the DVD player, is capable of Progressive Scan. If you  
are not sure whether the television (or Video projector), to which you want to  
connect the DVD player is capable of Progressive Scan and has cinch sockets  
available then you can check this by consulting the television's (or Video  
projectors's) instruction manual.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For both variations – "YPbPr" and "YUV"– you will need  
an audio cinch cable (not supplied)  
an YUV cable (not supplied) These can be obtained from your dealer.  
9. Connecting audio components to the  
DVD player  
On the rear panel of the DVD player you will find the connection sockets  
Y, Pb/Cb and Pr/Cr.  
Besides sound playback of DVDs, VCDs/S-VCDs and audio and MP3-CDs  
via the speaker of the television, to which the DVD player is connected,  
sound can also be played back via external audio components such as  
a HiFi system, Dolby digital/DTS receiver or a surround sound system.  
Connecting the DVD player via component signal:  
9.1 Requirements for the connection of a HiFi system  
In order to enjoy a full sound experience when playing DVDs with the DVD  
player you can connect a HiFi system to the player. Before connecting check  
with the HiFi system's instruction manual to verify...  
if the HiFi system is suitable for connection to a DVD player.  
if the HiFi system is equipped with cinch sockets; if yes, you can connect  
the HiFi system to the DVD player via cinch cables.  
Connecting a HiFi system:  
Connect the sockets Y (green), Pb/Cb (blue) and Pr/Cr (red) with the  
corresponding sockets on the television.  
Connect the audio output sockets AUDIO L/R on the rear panel of the DVD  
player to the corresponding audio inputs on the television with an audio  
cinch cable.  
Make sure that the red and white colour markings correspond.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/YUV.  
The menu option VIDEO OUTPUT is only selectable when the HDMI output  
is deactivated. On this subject see also chapter 10 "Settings in the OSD  
menu".  
Connect the audio output sockets AUDIO L/R on the rear panel of the DVD  
player to the corresponding audio inputs on the HiFi system with an audio  
cinch cable. Make sure that the red and white colour markings correspond.  
Check with the instruction manual which settings on the HiFi system may  
be necessary in order to reproduce sound via the HiFi system during the  
playback of a DVD, VCD/S-VCD, audio or MP3-CD from the DVD player.  
8.5 Connecting to a television via HDMI  
This connection variant is only possible with very high grade televisions,  
LCD/Plasma screens or Video projectors  
Check with the instruction manual of the corresponding playback device to  
see if this connections variant is available. It is possible that additional play-  
back device settings may have to be implemented. For this type of connection  
you will need the HDMI cable (supplied);  
Note:  
For an optimal sound experience place your HiFi system's loud speakers to  
the left and to the right of the television, on which you connected the DVD  
player.  
Connecting the DVD player via HDMI:  
If you connected the DVD player to the television via a Scart cable the audio  
signal will be transmitted via the cinch cable to your HiFi system as well as  
via the Scart cable to the television. In this case, set the volume of the television  
to the lowest value.  
9.2 Connecting digital audio components via digital cables  
In order to enjoy sound playback throughout the room from correspondingly  
equipped DVDs (recognizable by the Dolby Digital or DTS logos), you can  
connect the DVD player to a digital audio component, for example, a Dolby  
Digital or DTS receiver or a suitable surround sound system.  
The cables necessary for the following described connection variations can  
be obtained from your dealer.  
Firstly check with the digital component’s instruction manual to see if it allows  
for connection to the DVD player...  
Connect the jack inscribed with "HDMI" using a HDMI cable to the  
corresponding socket on the television.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu option VIDEO/HDMI Setup/ON.  
via a coaxial cable  
or via an optical cable.  
On this subject see also chapter 10 "Settings in the OSD menu".  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection via coaxial cable  
To connect the DVD player to a digital audio component with a digital coaxial  
cable:  
9.3 Connecting audio components via an analogue cable  
If a digital input is not available on the audio component you can connect  
the DVD player to it via conventional analogue cinch cables.  
Connect the "COAXIAL" inscribed plug to the corresponding socket on  
the digital audio component.  
Connecting via optical cable  
To connect the DVD player with analogue cables:  
To connect the DVD player to a digital audio component with an optical cable:  
Plug a cinch cable into each of the sockets FL (front left channel),  
FR (front right channel), SL (rear left channel), SR (rear right channel),  
CEN (front centre channel) and SW (Bass) on the rear panel of the DVD player.  
Insert the cinch cables into the corresponding analogue inputs of the  
audio component.  
Remove the protective plug from the "OPTICAL" inscribed socket on the  
rear panel of the DVD player and insert the optical cable plug.  
Insert the plug at the other end of the optical cable in the corresponding  
socket of the digital audio component.  
Note:  
9.4 Connecting the headphones  
The headphones output is located on the front panel of the DVD player.  
The optical cable is a glass fibre cable and must not be bent during installation.  
Otherwise the glass fibre contained in the cable could break and the cable  
would become unusable.  
Plug the 3.5 mm headphones jackplug into the headphones output.  
The audio output also continues to come out via the television set.  
Attention!  
Listening to music with headphones for long periods and at high  
volume levels can lead to hearing damage!  
Note:  
Make sure that no dirt can enter into the optical cable socket. This could cause  
signal interference. Always insert the protective plug into the socket if no optical  
cable is connected.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. OSD menu settings  
10.1 Using the OSD Menu  
To access the DVD players OSD menu press the SETUP button on the remote  
control. The OSD Menu with its menu options will appear on the television  
screen:  
All of the DVD player's settings can be made with the remote control via  
the so called "On Screen Display" menu ("OSD menu" for short). The OSD  
Menu will be superimposed on the television screen.  
GENERAL  
AUDIO  
DOLBY  
VIDEO PREFERENCE  
Note:  
TV DISPLAY  
PS  
In these instructions the English OSD menu is described. At any time you can  
set the menu to your country's language as described in "GENERAL > OSD  
LANGUAGE".  
ANGLE MARK  
ON  
ENG  
OFF  
ON  
OFF  
OSD LANGUAGE  
CLOSED CAPTIONS  
SCREEN SAVER  
GENERAL  
AUDIO  
DOLBY  
VIDEO PREFERENCE  
LAST MEMORY  
TV DISPLAY  
PS  
ANGLE MARK  
ON  
ENG  
OFF  
ON  
OFF  
OSD LANGUAGE  
CLOSED CAPTIONS  
SCREEN SAVER  
The following menu options can be selected:  
GENERAL, AUDIO, DOLBY, VIDEO and PREFERENCE.  
• With the control buttonsꢄꢀꢅand the ENTER button you can carry  
out all the settings in the menu.  
• With the control buttons you can select a menu by moving the yellow  
marking onto the corresponding menu symbol.  
LAST MEMORY  
Before you use the DVD player for the first time for playback of DVDs,  
VCDs/S-VCDs or audio/MP3-CDs you must implement a few settings via the  
OSD Menu. These settings are dependent amongst others on...  
• With the control buttons you select an input in a menu by moving  
the green bar over an input.  
• With the control buttonyou change an input in the sub menu and with  
the control button you move back to the previous menu level.  
• To confirm a selection press the ENTER button.  
the language, in which you want the OSD menu to be displayed  
which TV standard corresponds to the television, to which you want to  
connect the DVD player  
All navigation possibilities in a current menu are displayed at the lower  
Which image format your television can display  
edge of the menu.  
• To exit the OSD menu press the SETUP button again.  
Administering settings via the OSD menu  
First insert the connector plug of the DVD player's power cord into  
a power socket.  
10.2 Setup menu GENERAL  
In this menu you can, for example, set the image presentation or the language  
of the OSD menu.  
To switch the DVD player on activate the POWER switch on the rear panel  
of the DVD player. If the DVD player is already switched on but is in  
standby mode, press the button STANDBY on the remote control to  
switch the DVD player on. The standby mode is identified by the LED in  
the display on the front panel of the device.  
GENERAL  
AUDIO  
DOLBY  
VIDEO PREFERENCE  
TV DISPLAY  
PS  
ANGLE MARK  
ON  
ENG  
OFF  
ON  
OFF  
The device will check to see if a disc is inserted. The SilverCrest logo appears  
on the television screen:  
OSD LANGUAGE  
CLOSED CAPTIONS  
SCREEN SAVER  
LAST MEMORY  
TV DISPLAY  
Note:  
The menu option TV DISPLAY is only selectable when the HDMI output  
is deactivated.  
-4:3/PANSCAN Select this setting to display broadcasts in the usual 4:3  
format on a 4:3 television set. Broadcasts in the 16:9 format  
will be displayed in full screen without the distracting bars  
although the side edges of the image will be trimmed.  
-4:3/LETTERBOX Display of a film in 16:9 format on a traditional 4:3 format  
television. The image is displayed with black bars on the  
lower and upper edges of the screen.  
If no disc is inserted the notification NO DISC appears on the television  
screen and in the display.  
Firstly please familiarize yourself with the OSD Menu's operation by  
means of the following brief introduction.  
-16:9  
This setting is recommended when using a wide screen  
television in 16:9 format. An image in 4:3 format will be  
adapted horizontally to the image width.  
-Wide Squeeze An image in 4:3 format will be presented with black bars  
on the right and left edges.  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANGLE MARK  
-ON  
-3D SURROUND Select this setting to produce a virtual surround effect from  
If scenes are recorded on a DVD in different perspectives  
this will automatically be signified by a camera symbol  
displayed on the television screen. Press the ANGLE button  
on the remote control to display the various perspectives.  
Deactivate function. No symbol appears on the television  
screen.  
a stereo or multi channel sound.  
-5.1 CH  
Select this setting to activate the analogue 5.1 outputs.  
FRONT SPEAKER, CENTER SPEAKER, REAR SPEAKER and SUBWOOFER  
In these menu inputs you can activate/deactivate the individual speaker types  
and set the size.  
-OFF  
-Large  
Select this setting if the diameter of the speaker membrane  
is greater than 12 cm.  
OSD LANGUAGE  
Here you set the language, in which the OSD Menu will be shown on the  
display.  
-Small  
-OFF  
Select this setting for smaller speakers.  
Deactivate sound output for these types of speakers  
CLOSED CAPTIONS  
Note:  
-ON  
Select this setting if by every playback of a DVD the subtitle  
(if present) is to be automatically displayed on the television  
screen.  
The menu input FRONT SPEAKER can not be deactivated since the sound  
output for the front speakers always remains switched on.  
-OFF  
Select this setting to manually activate the subtitle.  
The subtitles can also be set, during playback, with the  
SUBTITLE button.  
DIALOG  
In this menu input you can set the dialogue volume (0-20).  
D.R.C. (Dynamic Range Control)  
This function sets the level of the dynamic range for motion picture soundtracks  
which are optimised for Dolby Digital. The function is particularly useful when  
listening to surround sound with a low volume level.  
SCREEN SAVER  
-ON  
Screen saver activated. The screen saver will now switch  
on when the playback is stopped and no activity takes  
place for several minutes.  
-ON  
Function activated  
-OFF  
Function deactivated.  
-OFF  
Deactivate function.  
-AUTO  
Function (if available) is automatically activated  
LAST MEMORY  
-ON  
Select this setting to playback a disc from the previously  
halted position after removal and re-insertion.  
DIGITAL AUDIO  
DIGITAL OUTPUT  
-OFF  
Deactivate function. The disc playback starts back at the  
begining after removing and then reinserting.  
In this menu input you can set the SPDIF output signal.  
-SPDIF / OFF  
No digital audio signal is being put out at the sockets  
COAXIAL or OPTICAL.  
Note:  
-SPDIF / RAW  
-SPDIF /PCM  
The crude data of the Dolby Digital sound is put out.  
Select the setting PCM (Pulse Code Modulation) when there  
is a connection to a digital amplifier/receiver. Your DVD  
player transmits, through the PCM signal, the same audio  
formats that are rendered on the disc. In addition an audio  
signal will be put out via the sockets FL and FR.  
If the DVD player is turned off with the POWER switch the saved position will not  
be preserved.  
10.3 Setup menu AUDIO  
In this OSD menu you can, for example, carry out settings for the analogue  
as well as the digital audio outputs.  
LPCM OUTPUT Select this input to set the sampling frequency for the  
processing of the crude data.  
Default setting.  
Only for DVDs with the corresponding sampling frequency.  
GENERAL  
AUDIO  
DOLBY  
VIDEO PREFERENCE  
-48K:  
-96K:  
ANALOG AUDIO  
DIGITAL AUDIO  
CHANNEL DELAY  
EQUALIZER  
Note:  
The LPCM OUTPUT function is only available if you have set the SPDIF audio  
output signal to PCM.  
3D PROCESSING  
CHANNEL DELAY  
Select this menu input to set the channel delay of the individual speakers.  
With optimal settings the sound reaches your ears simultaneously from all  
directions.  
ANALOG AUDIO  
DOWNMIX  
If you use the analogue 5.1 output in this menu you can carry out the  
appropriate settings.  
With the control button go to the graphics field beside the input.  
With the control buttons or select the speaker.  
With the control buttons you increase/decrease the value in increments  
of 10 cm. The maximum setable deviation for the CENTER speaker is 170 cm.  
The maximum setable deviation for the SUBWOOFER and the rear speakers  
is 510 cm.  
-LT/RT  
Only the left and right channels at the sockets FL and FR  
will put out signals.  
-STEREO  
A stereo sound will be put out. Select this setting if you are  
not using the analogue 5.1 outputs. The menu options  
CENTER SPEAKER and REAR SPEAKER are then not requi-  
red and therefore inactive.  
Confirm your entry by pressing the ENTER button.  
Note:  
The channel delay is determined by the front speakers therefore these are not  
selectable.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
-SOUND MODE Select this menu input if, when playing back sound, you  
want to use one of the preset equalizer levels ROCK, POP,  
LIVE, DANCE, TECHNO, CLASSIC or SOFT. To deactivate  
this function select the input OFF.  
10.4 Setup menu DOLBY  
In this OSD menu you can carry out settings for the Dolby-Digital output.  
GENERAL  
AUDIO  
DOLBY  
VIDEO PREFERENCE  
-BASS BOOST  
Select the setting ON if you want to boost the playback of  
the base tone. To deactivate this function select the input OFF.  
Select the setting ON to use the super base sound effect.  
In addition playback of the base tone will be boosted.  
To deactivate this function select the input OFF.  
DUAL MONO  
DYNAMIC  
-SUPER BASS  
-TREBLE BOOST Select the setting ON if you want to boost playback of the  
treble sounds. To deactivate this function select the input OFF.  
3D PROCESSING  
Select this menu input if you want to activate/deactivate the Pro Logic II process.  
DUAL MONO  
DYNAMIC  
Select this menu input to set the Dolby-Digital output to either  
STEREO, L-MONO, R-MONO or MIX-MONO.  
Select this menu input to enable an optimal sound playback  
with reduced volume. In the setting FULL the louder passages  
will be surpressed and the softer passages will be played  
back louder.  
Note:  
The menu option PRO LOGIC II can only be selected if the analogue  
5.1 outputs are activated.  
-PRO LOGIC II Select the setting ON if the process is to be activated all  
the time.  
Note:  
Select the setting AUTO if the process is only to be activated  
when Dolby Pro Logic II encoded content is located on the  
playback medium.  
To deactivate this function select the input OFF.  
In this menu you can set the Pro Logic II  
process mode.  
MUSIC: Sound is played back through the speakers  
without delay.  
MOVIE: Sound is played back with a delay of 10 ms  
through the rear speakers.  
This function is only possible when using a digital audio component.  
10.5 Setup menu VIDEO  
In this menu you can, for example, carry out settings for the video output,  
resolution or colour.  
-MODE  
GENERAL  
AUDIO  
DOLBY  
RGB  
VIDEO PREFERENCE  
VIDEO OUTPUT  
RESOLUTION  
COLOR SETTING  
HDMI SETUP  
PRO  
LOGIC: Earlier version of the DOLBY PRO LOGIC processes.  
AUTO: Automatic setting of the processes (depending on  
the contents of the playback medium).  
Xvid SUBTITLE  
ENG  
Note:  
The menu inputs PANORAMA, DIMENSION and CENTER WIDTH serve to  
fine tune the sound and are only available if you have set the process mode  
MUSIC.  
VIDEO OUTPUT  
-S-VIDEO  
The video signal will be put out via the S-video output and  
the composite video output.  
-PANORAMA  
-DIMENSION  
Select the setting ON to activate this sound enhancement.  
To deactivate this function select the input OFF.  
Select one of the settings SIZE -3 to SIZE 3 to activate this  
sound enhancement.  
-YUV  
-RGB  
The video signal will be put out in YUV colour format via  
the component video outputs Y, U/Pb, V/Pr.  
The video signal will be put out in RGB colour format via  
the SCART connection.  
-CENTER WIDTH Select one of the settings LEVEL 0-7 to receive a corresponding  
sound enhancement.  
Note:  
This setting is only active if the HDMI setup is deactivated.  
REVERB MODE Select this menu input if you want to use, for sound playback,  
one of the preset reverbs CONCERT, LIVING ROOM, HALL,  
BATHROOM, CAVE, ARENA, or CHURCH. To deactivate  
this function select the input OFF.  
The composite video output on the DVD player is always activated. If the selected  
setting deviates from the actual connection variation (apart from composite video)  
it is possible that no image or a poor image will be displayed on the television  
screen. In this event press, when playback is stopped, several times the V-MODE  
button on the remote control until the image is displayed properly.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESOLUTION  
In this menu input you can set the different resolutions  
(480i/480p/576i/576p/720p/1080i/1080p for the  
HDMI output/component video output.  
DISC MENU  
PARENTAL  
Note:  
In this menu input you can set the disc menu language that  
is to be the standard used when playing back films.  
In this menu input you can determine the age restrictions.  
)
Note:  
Be aware that for the TV standard PAL a setting with 50 Hz and for the TV  
standard NTSC a setting with 60 Hz must be selected.  
Only a few DVDs have a technical age restriction available. If there is no technical  
age restriction on the DVD your DVD players child lock feature can not  
be activated. The child lock can only function if it is activated on the DVD player  
and a corresponding code is available on the inserted DVD.  
COLOR SETTING  
If you insert a DVD which, according to the child lock, may not be played back  
a window appears on the screen, in which you must enter your password and  
confirm with ENTER. Some DVDs and CDs are encoded with encryption signals.  
In this way DVDs can be divided into eight different approval classes.  
Select one of the following approval classes to protect the playback of  
this media class with a password request:  
In this menu input you can implement the settings, for example, for the brightness,  
contrast or hue.  
-SHARPNESS  
Select this menu input to set one of the predefined sharpness  
values (HIGH, MEDIUM or LOW).  
-BRIGHTNESS  
With the help of the control buttonsꢄꢀset the brightness  
from -20 to +20. Subsequently press the ENTER button to  
continue.  
1 KID SAFE:  
2 G:  
also suitable for young children  
for all age groups  
-CONTRAST  
With the help of the control buttonsꢄꢀset the contrast  
from -16 to +16. Subsequently press the ENTER button to  
continue.  
3 PG:  
adult supervision recommended;  
4 PG 13:  
adult supervision strongly recommended; some scenes are  
not suitable for children under 12  
-GAMMA  
-HUE  
Select this menu to set one of the predefined gamma values  
(HIGH, MEDIUM, LOW or NONE).  
With the help of the control buttonsꢄꢀset the hue from -  
5 PGR:  
6 R:  
7 NC 17:  
8 ADULT:  
for children under 16; adult supervision recommended  
for children under 16; adult supervision strongly recommended  
not for teenagers under 18 years of age  
for adults only  
9 to +9. Subsequently press the ENTER button to continue.  
-SATURATION With the help of the control buttonsꢄꢀset the saturation  
level from -9 to +9. Subsequently press the ENTER button to  
continue.  
Example  
-LUMA DELAY  
Select this menu input to set one of the predefined gamma  
values (0 T or 1 T).  
If a DVD was encoded with, for example, approval class 7 or 8 and you have  
an approval class setting between 1 and 6 then a message follows and the  
password must be entered. Also only parts of the DVD, that is to say certain  
film scenes, may be encoded with an approval class or various approval classes.  
HDMI Setup  
-ON  
-OFF  
Select this menu input to activate the HDMI output.  
Select this menu input to deactivate the HDMI output.  
In this menu input you can set the Xvid subtitle language  
that is to be the standard used when playing back films.  
Xvid SUBTITLE  
To activate the approval class you must select, in the PARENTAL menu,  
the desired approval class and enter the password (136900).  
Confirm your entry by pressing the ENTER button.  
10.6 Setup menu PREFERENCE  
In this menu you can, for example, carry out the settings for the video output,  
activate/deactivate the child lock or change the password.  
PASSWORD  
In this menu input you can change the factory default  
password (136900) and assign your own password.  
Only the numbers 0-9 can be used.  
Note:  
Note:  
The menu option PREFERENCE is only selectable when playback is  
completely finished.  
In the event that you forget your new password you can use the factory preset  
password (136900).  
GENERAL  
AUDIO  
DOLBY  
PAL  
VIDEO PREFERENCE  
DEFAULT  
In this menu input you can restore the DVD players factory  
defaults.  
TV TYPE  
AUDIO  
ENG  
ENG  
ENG  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULT  
TV TYPE  
-PAL  
PAL television standard  
-NTSC  
NTSC television standard.  
AUDIO  
In this menu input you can set the language that is to be  
the standard used when playing back films.  
SUBTITLE  
In this menu input you can set the subtitle language that is  
to be the standard used when playing back films.  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Initial operation of the DVD player  
11.3 Inserting memory cards/USB memory sticks with  
MP3/WMA/ MPEG4/JPEG data.  
After you have …  
placed the DVD player in a suitable location  
connected the DVD player to a television by one of the designated  
connection options  
connected the DVD player, if desired, to a HiFi or Surround system  
(analogue/digital) for example a Dolby Digital or DTS receiver  
made the remote control ready for operation by inserting the batteries  
and know how to activate and operate the OSD menu with the remote  
control  
Note:  
The DVD Player always starts in DVD mode. To read memory cards/USB memory  
sticks press the USB button on the remote control. The DVD player recognizes  
the data formats JPEG, MP3, WMA and MPEG4.  
In order to insert memory cards of the types SD, MS/MSPro and MMC into  
the DVD player:  
Switch on your television.  
Make sure that the DVD player is ready for operation.  
… the DVD player is ready for operation.  
If the television, the DVD player and possibly other connected devices (i.e. an  
audio component) are ready for operation and are switched on and the DVD  
player is connected correctly to the television you will now see the Silvercrest  
logo on the TV screen  
If no disc is inserted into the DVD player's disc tray: The message NO DISC is  
displayed on the television screen.  
11.1 Switching the DVD player on/off  
• Insert the mains power cable into a properly installed mains power socket.  
• Place the POWER switch on the rear panel of the device to the ON position.  
The DVD player is now in standby mode.  
• With the STANDBY  
button on the remote control or the STANDBY  
button  
you switch the DVD player on and/or back to the standby  
Slide the memory card into the memory card slot.  
Then proceed with the following steps depending on the type of memory  
card that you want the device to read.  
on the device  
mode.  
• To switch the DVD player off place the POWER switch on the rear panel of  
the device to the OFF position.  
Warning!  
Note:  
Always make sure that you insert memory cards into the memory card slot as  
described hereafter! Under no circumstances bend or buckle the memory  
card when inserting into the memory card slot! Slide the memory card up to  
the stop in the memory card slot, with a light pressure.  
The device has no display indicators when it is switched off or in the standby  
mode. In standby mode the standby LED lights up in the display.  
11.2 Inserting the DVD  
To play a disc with the DVD player:  
Allow the memory card to slide in without force:  
Switch on your television.  
Make sure that the DVD player is ready for operation.  
Check to make sure that the memory card is one that the DVD player is  
capable of reading.  
If the television, the DVD player and possibly other connected devices (i.e. an  
audio component) are ready for operation and are switched on and the DVD  
player is connected correctly to the television you will now see the Silvercrest  
logo on the TV screen  
If no disc is inserted into the DVD player's disc tray:  
The message NO DISC is displayed on the television screen.  
Do not attempt to insert memory cards of another type in the memory  
card slot!  
Make sure that you have inserted the memory card into the memory  
card slot in the correct manner.  
Under no circumstances attempt to force the memory card into the memory  
card slot!  
Open the disc tray by pressing the button  
trol or on the front panel of the DVD player. OPEN is displayed on the  
television screen.  
OPEN/CLOSE on the remote con-  
Otherwise the DVD player, memory card and the data on the memory card  
could be damaged!  
Insert the disc in the disc tray with the inscribed/labled side up.  
For two-sided discs: The side you would like to play must face down.  
Supported memory card types and capacities  
Memory cards of the types SD (2 GB not SDHC), MS/MSPro (4 GB), MMC  
(4 GB) can be played back.  
After you have inserted the disc press the button  
OPEN/CLOSE on the re-  
mote control or on the front panel of the DVD player again to close the  
disc tray.  
Note:  
The contents of the disc will now be loaded; this may take a few seconds.  
In the meantime LOADING is displayed on the television screen.  
Your DVD player can only read storage mediums with several data formats if  
each folder contains only one data format.  
MultiMediaCard- /SecureDigital memory cards (MMC/SD)  
Insert the MMC/SD memory cards with the contacts forward and slide them  
straight into the memory card slot.  
With this the side of the memory card, on which the contacts are located  
must face downwards with the chamfered corner facing to the right.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MemoryStick/memory cards (MS/MSPro)  
Slide the MS memory card into the memory card slot, level and with the  
contacts facing forward.  
12. Playing back DVDs, VCDs or S-VCDs  
With this the side of the memory card, on which the contacts are located  
must face downwards with the chamfered corner facing to the left.  
To play back a DVD/VCD/S-VCD with the DVD player...  
Switch on your television.  
Make sure that the DVD player is ready for operation.  
If the television, the DVD player and possibly other connected devices (i.e. an  
audio component) are ready for operation and are switched on and the DVD  
player is connected correctly to the television you will now see the "Silvercrest"  
logo on the TV screen  
USB memory sticks (USB)  
The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity  
of 4GB.  
USB memory sticks must be inserted into the USB port.  
• Open the disc tray on the front panel of the DVD player by pressing the  
OPEN/CLOSE button.  
OPEN now appears in the display on the front panel of the DVD player and  
on the television screen.  
• Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled  
side up.  
• Press the OPEN/CLOSE button again to close the disc tray.  
CLOSE will appear in the display on the front panel of the DVD player and  
on the television screen while the disc tray is closing.  
• The contents of the inserted DVD/VCD/S-VCD will now be loaded; this  
may take a few seconds. In the meantime LOADING blinks in the display  
on the front panel of the DVD player and on the television screen.  
• Playback of the inserted DVD/VCD/S-VCD starts automatically.  
Press the USB button on the remote control. If several memory mediums  
(USB and memory card) are inserted press, repeatedly, the USB button  
until the contents of the USB memory stick is displayed. This procedure  
also applies to particular memory cards.  
Note:  
11.4 Removing memory cards/USB memory sticks  
Memory cards/USB Memory sticks should only be removed after the memory  
card slot is deactivated. Thus avoiding the possibility of damage or data loss.  
DVDs, VCDs and S-VCDs that you want to playback with the DVD player  
may possibly have a country code which is printed on the DVD's jacket.  
The DVD player can only playback DVDs/VCDs/S-VCDs with the country code  
If no country code is printed on the cover of a DVD/VCD/S-VCD...  
.
Press the USB button on the remote control to return to the DVD mode.  
For this a disc must be inserted into the DVD player.  
You can now remove the memory card/USB memory stick from the memory  
card slot/USB port.  
• but instead the symbol  
, then the DVD/VCD/S-VCD can be  
played back with the DVD player  
• then the DVD/VCD/S-VCD can possibly not be played back with the  
DVD player. You can check this by attempting to play back the DVD.  
Depending on the inserted DVD/VCD/S-VCD it is possible that the contents  
of the DVD/VCD/S-VCD will not playback immediately, rather first a selection  
menu appears on the television screen.  
In this event select the menu option, which will start the playback of the film,  
with the control buttons ꢄꢀꢅꢆon the remote control.  
• To start playback of the film press the ENTER button on the remote control  
or press the PLAY/PAUSEbutton.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In the display on the front panel of the DVD player, the following notices  
Access the DVD menu (MENU)  
appear:  
With DVDs:  
Note:  
"DVD"  
This function may not be available on all DVDs! If you attempt to execute  
a function that is not available, the symbol  
screen.  
the number of the currently playing chapter  
the played back so far time of the currently playing DVD in minutes and  
seconds  
is displayed on the television  
With many films on DVDs there is a main menu on the disc which, apart from  
the option of playing back the main film, allows you to select from the following  
contents:  
With VCDs/S-VCDs:  
"VCD" or "S-VCD"  
the number of the currently playing title  
the played back so far time of the currently playing VCD/S-VCD in  
minutes and seconds  
the subtitle and film dialogue languages  
direct chapter selection  
to playback the films bonus material (Background information,  
"Making of" etc.)  
12.1Features during playback of a DVD, VCD or S-VCD  
During the playback of a DVD/VCD/S-VCD you can use the following DVD  
player features...  
If such a menu is present on the DVD inserted in the DVD player you can access  
it during playback by pressing the MENU button on the remote control.  
You can select particular menu options by pressing the control buttons  
ꢄꢀꢅꢆon the remote control.  
Pause playback  
To pause the playback of the inserted DVD/VCD/S-VCD...  
To confirm the selected menu option press the PLAY/PAUSEbutton or the  
ENTER button on the remote control.  
During playback press the PLAY/PAUSEbutton  
To return to playback press the MENU button on the remote control again.  
will now appear in the display on the front panel of the DVD player and  
on the television screen.  
Note:  
On the television screen you will see a freeze frame of the scene that has just  
been halted.  
If you cancel playback by pressing the STOPbutton twice (Playback stop without  
resume function) access to the disc's main menu is no longer possible.  
To contnue playback of the film press the PLAY/PAUSEbutton.  
Playback Control (PBC) with VCDs/S-VCDs  
Stop playback (STOP)  
To stop playback of the film on the inserted DVD/VCD/S-VCD press the  
STOPbutton.  
Many VCDs/S-VCDs have Playback Control (in short "PBC"). Playback Control  
indicates a main menu that allows operation of several functions of the  
VCD/S-VCD.  
With resume function  
If PCB is available on a VCD/S-VCD inserted in the DVD player you must first  
activate it in order to be able to superimpose the menu.  
• During playback or when playback is stopped press the MENU button.  
The message PBC: OFF appears in the display.  
• Press the MENU button again. The message PBC: ON appears in the display.  
PBC is now switched on the discs main menu can be accessed with the  
MENU or TITLE buttons.  
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing  
the STOPbutton once the DVD player automatically saves the position  
where playback was interrupted. This function is called the "resume function".  
PRESS PLAY KEY TO CONTINUE appears on the television screen. As  
soon as you press the PLAY/PAUSEbutton again playback will continue  
from the saved position.  
Without resume function  
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing  
the STOPbutton once and you press the STOPbutton a second time the  
saved position, at which you interrupted the playback, will be cleared.  
When you press the PLAY/PAUSEbutton again playback of the inserted  
DVD/VCD/S-VCD starts from the beginning.  
Note:  
If you switch on PBC during playback then it is possible that playback will  
stop and start again from the beginning and/or with the main menu.  
Skip to start of chapter (Skip)  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
a function that is not available, the symbol  
screen.  
is displayed on the television  
With the buttons SKIP FWD  
and SKIP BWD  
you can, during playback,  
within the film on the inserted DVD/VCD/S-VCD …  
skip forward to the beginning of the next chapter or  
skip backward to the preceeding chapter  
The respectively selected chapter will playback immediately without having  
to press the PLAY/PAUSEbutton. The number of the respectively selected  
chapter will be displayed on the front panel of the DVD player to the left of  
the played back so far time.  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Title number input via the number buttons  
Audio CD  
• During playback press repeatedly the GOTO button on the remote control.  
The following notices appear, one after the other, in which you can enter  
a time position with the number buttons:  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
DISC GOTO:  
Enter here a time position on the disc from where playback  
should start.  
a function that is not available, the symbol  
screen.  
is displayed on the television  
TRACK GOTO: Enter here a time position for the currently playing back  
title from where playback should start.  
SELECT TRACK: Enter here a title number from where playback should start.  
Instead of using the Skip function you can also enter the title from within the  
film on the inserted DVD/VCD/S-VCD direct by entering the title number via  
the number buttons on the remote control.  
For this, during playback or when playback is stopped, press the number  
buttons on the remote control corresponding to the title number, for  
example, the 3 button for the third title.  
MPEG CD  
SELECT:  
Enter here a title number on the disc from where playback  
should start.  
Playback of the entered title number will now start automatically.  
GOTO:  
Enter here a time position for the currently playing back  
title from where playback should start.  
Direct chapter or time selection via the Search function (GOTO)  
Fast scan forward/backward  
Note:  
With fast scan you can select designated passages from the inserted  
DVD/VCD/S-VCD during playback.  
This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt  
For fast scan forwards/backwards press the FAST FWD and/or FAST RWD  
button repeatedly to set the following fast scan speeds:  
to carry out functions that are not available the symbol  
on the television screen.  
will be displayed  
Entry of the time position via search function DVD, VCD and SVCD:  
• During playback press the GOTO button on the remote control. The time  
menu is superimposed on the television screen:  
MENU  
TITLE  
01 / 13  
02 / 05  
2 CH  
CHAPTER  
AUDIO  
SUBTITLE  
Note:  
ENGLISH  
ENGLISH  
During fast scan no sound will be played back.  
• To continue playback of the film at the selected place in normal  
BITRATE  
50 IIIIIIII  
TITLE ELAPSED 0:00:56  
speed press, during fast scan the PLAY/PAUSEbutton.  
• The entry field TITLE is automatically selected first. Press the ENTER button  
and enter, with the number buttons, the desired title. On DVDs title 01 is  
most often the main film.  
Slow playback forward (Slow motion)  
To playback the contents of the inserted DVD/VCD/S-VCD in slow motion …  
• Press the navigation button to select the entry field CHAPTER. Press the  
ENTER button and enter, with the number buttons, the desired chapter.  
• Press the navigation button to select the entry field AUDIO. Press the  
ENTER button and select, with the navigation buttons ꢅꢆ, an audio language.  
• Press the navigation button to select the entry field SUBTITLE. Press the  
ENTER button and select, with the navigation buttons ꢅꢆ, a subtitle language.  
• Press the navigation button to select the entry field ANGLE. Press the  
ENTER button and select, with the navigation buttons ꢅꢆ, another camera  
perspective (if available).  
For slow playback forwards press the SLOW button repeatedly to set the  
following playback speeds:  
• Press the navigation button to select the entry field TT TIME. Press the  
ENTER button and enter, with the number buttons, the desired title time.  
• Press the navigation button to select the entry field CH TIME. Press the  
ENTER button and enter, with the number buttons, the desired chapter time.  
• Press the navigation button to select the entry field REPEAT. Press the  
ENTER button and select, with the navigation buttons ꢅꢆ, a repeat function  
(see also repeat functions).  
Note:  
During slow motion playback no sound will be played.  
To continue playback from a selected position in normal speed, during  
slow motion playback press the PLAY/PAUSEbutton.  
• Press the navigation button to select the entry field TIME DISP. Press  
the ENTER button and select, with the navigation buttons ꢅꢆ, a time  
presentation (see also superimpose disc information).  
• To fade the menu out press the GOTO button again.  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image enlargement (Zoom)  
Change playback language  
Note:  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
This function may not be available on all DVDs! If you attempt to execute a  
a function that is not available, the symbol  
screen.  
is displayed on the television  
function that is not available, the symbol  
screen.  
is displayed on the television  
During the playback of an inserted DVD/VCD/S-VCD you can enlarge the  
image on the television screen in three levels. For this press the ZOOM button  
on the remote control to set the following enlargement levels:  
With many films on DVD you can, during playback, select another playback  
language by pressing the AUDIO button on the remote control.  
The first press of the AUDIO button switches to the first available playback language.  
With each further press of the AUDIO button other available playback languages,  
one after the other, are switched on.  
The currently switched on playback language will be superimposed on the  
television screen.  
Programmed playback (PROG)  
With the control buttons ꢄꢀꢅꢆsections of the enlargement can be  
suspended.  
Note:  
To switch off the enlargement function and return to the normal image  
size press repeatedly the ZOOM button.  
This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt  
to execute a function that is not available, the symbol  
television screen.  
is displayed on the  
Change camera aspect (Angle)  
With the "Programme" function you can put together your own film programme  
in so far as you can select only certain chapters of an inserted DVD/VCD/S-VCD  
for playback. In this way you can determine for yourself the sequence, in which  
the chapters are played back. You can compile a maximum of 20 chapters  
of a film for programmed play.  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
a function that is not available, the symbol  
screen.  
is displayed on the television  
Press the PROG button on the remote control during playback or when  
Many films on DVD contain chapters which were recorded simultaneously  
from various camera perspectives. With films that have such chapters  
available you can view the same chapter from different perspectives.  
For this press the ANGLE button on the remote control during playback of an  
inserted DVD. Each press of the ANGLE button will switch to one of the  
available camera perspectives.  
playback is stopped.  
The Programme menu will be displayed on the television screen.  
Programme window  
1
2
3
4
5
6
7
TT:  
TT:  
TT:  
TT:  
TT:  
CH:  
CH:  
CH:  
CH:  
CH:  
TT:  
TT:  
TT:  
TT:  
CH:  
CH:  
CH:  
CH:  
8
Superimpose/fade out subtitles  
9
10  
Note:  
EXIT  
This function may not be available on all DVDs! If you attempt to execute  
a function that is not available, the symbol  
screen.  
is displayed on the television  
First are listed the programme positions 1-10, programme position 1 is  
highlighted.  
If the film on the inserted DVD has subtitles available you can superimpose  
these on the television screen during playback by pressing the SUBTITLE button  
on the remote control.  
1. With the number buttons enter the number of the title that is to be played  
back first. The highlight changes to chapter entry (CH:).  
2. With the number buttons enter the number of the chapter that is to be  
played back. The highlighting moves to the programme position 2.  
3. Select, with the navigation buttons ꢄꢀꢅꢆ, further programme positions  
and enter title and chapter numbers for the programme positions.  
• To display the next 10 programme positions select, with the navigation  
buttons ꢄꢀꢅꢆ, the field and press the ENTER button.  
You can allocate up to 20 programme positions.  
With the first press of the SUBTITLE button the subtitle of the first available  
language will be superimposed on the television screen. With each further  
press of the SUBTITLE button the subtitles of other available languages will be  
superimposed successively on the television screen.  
The number of the currently superimposed subtitle language will be superimposed  
on the television screen ( i.e. 1/10 for the first of ten available subtitle languages).  
• To delete entries in a programme position select the programme position  
and press the ENTER button.  
When the last of the available subtitle languages is superimposed (i.e. 10/10  
for the tenth of ten available subtitle languages) you can switch off the subtitle  
function by pressing the SUBTITLE button again. OFF is superimposed on the te-  
levision screen.  
• To stop the programme function select the field EXIT and press the ENTER  
button. All allocated programme positions are deleted.  
4. You start playback of the programme positions by selecting the field  
START and press the ENTER button.  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
During the programmed playback the notice PROGRAM appears in the display.  
To delete the programmed playback press twice, during playback, the STOPꢂ  
button on the front panel of the DVD player or on the remote control.  
TITLE  
ALL  
Select TITLE to continuously repeat the currently playing  
back title until repeat playback is switched off or playback  
is cancelled by pressing the STOP button twice.  
Select ALL to continuously repeat all available titles on the  
disc, thus the entire disc, until playback repeat is switched  
off or playback is cancelled by pressing the STOPbutton  
twice.  
Note:  
If you are not sure what number a title and/or chapter to be programmed has  
then select the corresponding chapter, during playback of the film, with the  
buttons SKIP FWD  
and SKIP BWD  
and susequently press the DISPLAY button  
To switch off repeat playback press the REPEAT button repeatedly, during play-  
on the remote control to superimpose all information from the inserted DVD/VCD/  
S-VCD onto the television screen. Here you will find, amongst others, the current  
title and chapter numbers.  
back, until no more notifications appear on the television screen.  
Repeat function with MP3/WMA/MPEG/ JPEG/Xvid discs  
During playback press the REPEAT button several times to apply the following  
On this topic see also the section "Superimpose disc information".  
repeat functions (the set function appears in the display):  
Superimpose disc information  
RANDOM  
Random playback of the titles on the disc and/or the data carrier.  
Note:  
SINGLE  
One time playback of the current title/image.  
REPEAT ONE  
Endless repeat of the current title/image.  
REPEAT FOLDER  
This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt  
to execute a function that is not available, the symbol  
television screen.  
is displayed on the  
With this function you can superimpose all the available information from  
a DVD/VCD/S-VCD inserted into the DVD player onto the television screen  
during playback.  
Repeat the current folder.  
ALL  
Repeat all titles on the disc and/or data carrier.  
For this, during playback, press the DISPLAY button on the remote control.  
On the television screen will be superimposed:  
Repeat sequence (A–B)  
With this function you can repeat playback of a favourite sequence within  
With DVDs:  
a chapter of the current playback disc.  
• the current title number/the total number of titles  
• the current chapter number/the total number of chapters  
• the played back so far time in hours, minutes and seconds (TITLE ELAPSED)  
• the time to the end of the film in hours, seconds and minutes (TITLE REMAIN)  
• the played back so far time of the chapter in hours, minutes and seconds  
(CHAPTER ELAPSED)  
To do this …  
• During playback press the A – B button on the remote control as soon as the  
desired sequence starts to playback.  
A appears on the television screen.  
• Press the A – B button again as soon as the end of the desired sequence is  
played back. Pay careful attention to the fact that the start and finish of  
the sequence must be located within a chapter.  
• the time to the end of the chapter in hours, seconds and minutes  
(CHAPTER REMAIN)  
AB appears on the television screen.  
Repeat playback of the selected sequence begins immediately without you  
having to press the PLAY/PAUSEbutton. The sequence will continuously re-  
peat until you press the A – B button again in order to switch off the function.  
With VCDs/S-VCDs:  
• the current title number/the total number of titles  
• the played so far time of the current playback title on the VCD/SVCD in  
hours, minutes and seconds (SINGLE ELAPSED)  
Setting playback volume  
Press the VOL + button on the remote control during playback to increase play-  
• the time to the end of the current playback title in hours, seconds and minutes  
(SINGLE REMAIN)  
back volume or the VOL – button to reduce playback volume.  
To stop display of the disc information press repeatedly the DISPLAY button  
until the notice DISPLAY OFF appears on the television screen.  
Dimmer  
Press the DIMMER button on the remote control to change the DVD player's  
display brightness in three levels.  
Repeat function for DVDs, VCDs, S-VCDs and audio CDs  
With the repeat function you can…  
To switch playback sound to mute (MUTE)  
... in the case of DVDs, selectively repeat title, chapter or the entire DVD.  
... in the case of VCDs/S-VCDs individual titles and/or the entire VCD/S-VCD  
repeatedly playback.  
... in the case of audio CDs, playback repeatedly a particular track and/or  
the entire CD.  
To switch the playback sound to mute press the (MUTE) button on the remote  
control during playback of DVDs, VCDs/S-VCDs, audio CDs and CD-Rs/CD-RWs  
with MP3 or WMA data. MUTE is displayed on the television screen.  
When you want to switch the playback sound back on press the (MUTE) button  
again or the VOL + and VOL – buttons. MUTE OFF or the corresponding volume  
level is displayed on the television screen.  
To switch on repeat playback...  
• Press the REPEAT button several times during playback.  
The repeat symbol  
notifications:  
CHAPTER  
appears in the display with one of the following  
Select CHAPTER to continuously repeat the currently playing  
back chapter until repeat playback is switched off or play-  
back is cancelled by pressing the STOP button twice.  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. To open a folder select the folder and press the ENTER button. The contents  
13. Playback of JPEG-Photo  
CD/WMA/MP3/MPEG4  
of the folder will be listed.  
2. To reach a higher folder level select the symbol  
press the ENTER button.  
with the entry ".." and  
Insert a storage medium into the DVD player. If you use a memory card or  
USB stick press repeatedly the USB button until the desired playback source  
is depicted.  
The contents of the data carrier (CD, DVD, USB memory stick or memory card)  
will be displayed on the television:  
Playback of JPEG discs  
• With the navigation buttons highlight an image and press the ENTER  
button or the PLAY/PAUSEbutton to open the image.  
The image is shown on the display  
Subsequently change the view to the next available image on the disc/in the  
folder.  
Display of MP3 data  
• To display the currently shown image press the PLAY/PAUSEbutton longer.  
• To continue the playback press the PLAY/PAUSEbutton again.  
• You can access an image directly by entering the image's file number with  
the number buttons and subsequently confirm the entry with the ENTER button.  
• With the navigation buttons you can rotate the image in 90° increments  
during playback.  
• With the navigation buttons you can mirror the image horizontally  
or vertically during playback.  
• During playback press the STOPbutton to display a miniature view of all  
images in the folder/on the disc. 12 miniatures will be displayed on each  
page.  
00:23  
001/058  
03:56 160 Kbps  
\ music  
..  
01 track01  
02 track02  
03 track03  
04 track04  
05 track05  
06 track06  
DISC  
DISC  
DISC  
• Select with the navigation buttons ꢄꢀꢅan image and start playback  
with ENTER or PLAY/PAUSE.  
• Select with the navigation buttons ꢄꢀꢅone of the following entries  
Display of JPEG data  
00:00  
001/037  
00:00  
from the bottom display lines and confirm the entry with the ENTER button.  
\ pictures  
Slide Show  
Menu  
Starts a slide show of the images in the folder/on the disc  
Shows the available button functions for JPEG playback.  
Press the ENTER button until this menu has faded out.  
switches to the previous page  
..  
picture 01  
picture 02  
picture 03  
picture 04  
picture 05  
picture 06  
Prev  
Next  
switches to the next page  
• Press the MENU button to switch to the file list again  
Selection of slide show transitions:  
Display of AVI and MPEG data  
You can select different transitions for changing from one image to the next.  
WIPE TOP, WIPE BOTTOM, WIPE LEFT, WIPE RIGHT, DIAGONAL WIPE  
LEFT TOP, DIAGONAL WIPE RIGHT TOP, DIAGONAL WIPE LEFT BOTTOM,  
DIAGONAL WIPE RIGHT BOTTOM, EXTEND FROM CENTER H, EXTEND  
FROM CENTER V, COMPRESS TO CENTER H, COMPRESS TO CENTER V,  
WINDOW H, WINDOW V, WIPE FROM EDGE TO CENTER and NONE.  
• During the slide show press the PROG button until the name of the desired  
transition appears in the upper left corner of the television screen.  
00:00  
001/006  
00:00  
\ videos  
..  
video 01  
video 02  
video 03  
video 04  
video 05  
video 06  
• The data is listed on the left (Data window). Folders will be depicted with  
the symbol  
.
• To superimpose the folders available on the disc press the PROG button  
repeatedly until the notice FOLDER appears at the bottom of the display.  
• Press the PROG button again repeatedly until the notice FILELIST appears at  
the bottom of the display. Folders will now be faded out and all data on  
the disc is represented in a list.  
• The area on the right is intended for the previewing of JPEG images.  
A preview appears as soon as you highlight a JPEG file in the file window.  
• At the bottom is located the information bar, in which is displayed the image  
size (JPEG Image) as well as the medium (DISC, USB or CARD), on which  
the files are located.  
• Select a file with the aid of the navigation buttons ꢅꢆ. You confirm the  
selection by pressing the ENTER button. The file will be played back and/  
or the JPEG Photo displayed.  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A window appears, in which is displayed the copying process with a progress  
bar.  
14. CD Ripping function  
With the DVD player you can transfer music and speech files in the format  
.cda (CD Audio) or from a disc onto a USB memory stick. Thereby files in  
the MP3 format will be saved onto the USB memory stick.  
CD RIP  
Ripping  
Selected  
TRACK  
TRACK Progress  
track01  
track02  
track03  
track04  
track05  
track06  
track07  
28 %  
04:43  
04:09  
04:49  
00:53  
01:08  
05:00  
Note:  
Total Progress  
CANCEL  
When transfering audio files to a data carrier be aware of the existing copyright  
laws and regulations! Make sure that you are producing copies for private  
use only and do not violate applicable laws!  
SUMMARY  
Now ripping  
TRACK  
01 / 16  
CD RIP  
OPTIONS  
Normal  
128kbps  
TRACK  
track01  
To prematurely abort the copying process select the input CANCEL and  
confirm with the ENTER button.  
Speed  
Bitrate  
04:09  
04:43  
04:09  
04:49  
00:53  
01:08  
05:00  
track02  
track03  
track04  
track05  
track06  
track07  
Create ID3 Yes  
Device USB  
Attention!  
Never remove the USB memory stick from the USB port during copying!  
Otherwise it could lead to data loss on the storage medium.  
SUMMARY  
Selected  
Selected  
TRACK  
Time  
0
00:00  
Note  
Start  
Exit  
Select all  
Select none  
On the memory medium the index RIP001 will be applied for the MP3 files.  
For each further copy process of a new CD another index RIP002, RIP003  
etc. will be applied.  
• Place an audio CD into the disc tray.  
• Insert a USB memory stick into the USB port.  
• Whilst playback is stopped press the RIPPING MENU button on the remote  
control. The menu depicted above appears on the television screen.  
Speed  
Bitrate  
Select this menu input to set the speed of the transfer either 15. Cleaning of the DVD player  
to Normal or Fast.  
Select this menu input to set the MP3 quality. Possible bitrates  
are 96 kbps, 112 kbps and 128 kbps. A higher bitrate  
will result in a larger  
Clean the housing of the DVD player with a slightly damp cloth and a mild  
cleanser only. When cleaning, make sure that no moisture gets into the DVD  
player!  
MP3 file on the data carrier after copying.  
Select this menu input to automatically create an ID3 tag  
for the MP3 files.  
Clean the inside of the disc tray, if necessary, exclusively with a clean dry  
brush (i.e. a lens brush obtainable from a photographic dealer).  
Never clean the inside of the disc tray with anything moist!  
Create ID3  
• Select, with the control buttons ꢄꢀꢅꢆ, a title from the  
Title list and confirm with the ENTER button. The title will be marked with  
a tick. In the same way you select further titles for copying in MP3 format.  
• To mark all titles for copying in MP3 format select, with the control buttons  
ꢄꢀꢅthe input Select all and confirm with the ENTER button.  
All titles will be marked with ticks.  
• To cancel the marking of all titles select, with the control buttons ꢄꢀꢅꢆ, the  
input Select none and confirm with the ENTER button. The markings will be  
deleted.  
Warning!  
Moisture penetrating into the DVD player creates the risk of an electric shock!  
The DVD player may also be irreparably damaged!  
16. Disposal  
Disposing of the device  
• To start the copying process select, with the control buttons ꢄꢀꢅꢆ,  
the input Start and confirm with the ENTER button.  
Do not, under any circumstances, discard the device in the household  
refuse. This product is subject to the European directive 2002/96/EC.  
• To exit the CD-Ripping function select, with the control buttons ꢄꢀꢅꢆ,  
the input EXIT and confirm with the ENTER button.  
Dispose of the device through an approved disposal centre or at your community  
waste facility.  
Observe the currently applicable regulations. In case of doubt, please contact  
your waste disposal centre.  
Disposing of batteries!  
Do not dispose of the batteries with household waste. Every consumer is legally  
obliged to dispose of batteries at a collection site in his community/city district or  
at a retail store.  
This obligation is intended to ensure that batteries are disposed of in an  
environmentally friendly manner.  
Only dispose of batteries when they are fully discharged.  
Disposal of packaging  
Dispose of the packaging materials in an environmentally responsible  
manner.  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17. Troubleshooting  
C
Check whether the settings in the OSD menu match the connection option  
you have used to connect the audio components to the DVD player.  
For this see chapter 9. "Connecting an audio component to the  
DVD player".  
Display is blank/DVD player shows no functions even though it is  
switched on  
A
Check to see that the power cable is inserted properly into the power  
socket.  
Check to ensure that the power socket in which you have plugged the  
power cable of the DVD player is live by connecting another device to  
it. If necessary plug the DVD players power cord into another power  
socket.  
D
E
Using the television's instruction manual check to see if current settings to  
the television are necessary in order to use the DVD player with the tele-  
vision.  
Check by means of the operating instructions for a potential connected  
audio component if settings to it are necessary in order to use it with the  
DVD player.  
B
C
Check to see that the display dimmer function is switched off.  
To do this press the DIMMER button on the remote control.  
Switch off the DVD player by activating the POWER switch and then wait  
ten seconds. Then switch the DVD player back on by activating the POWER  
switch again.  
F
If you …  
have connected the DVD player to a stereo television and have not  
connected an audio component to the DVD player or  
have connected a Dolby Prologic compatible audio component via the  
analogue stereo outlet (via cinch cables to the cinch sockets L and R)  
of the DVD player:  
D
The display shows "No Disc" even though there is a disc inserted  
Check to see that you have selected in the OSD menu AUDIO with the  
menu input FRONT SPEAKER the setting LARGE.  
A
The disc is dirty, scratched or damaged. Clean the disc or insert another  
disc.  
B
The Country/Region code on the inserted DVD/VCD/S-VCD does not  
correspond to the Country/Region code of the DVD player. In this case  
the DVD/VCD/S-VCD cannot be played with the DVD player.  
No 4:3 or 16:9 image  
A
Check by means of the televisions operating instructions, which image  
formats the television has at its disposal.  
B
Check to see if the settings in the OSD menu match the available image  
format of the television.  
Inserted disc will not playback  
It is possible that a layer of condensation has built up on the DVD players laser  
scan lens. This can be the case especially if the DVD player has been subjected  
to strong temperature fluctuations.  
If this is the case place the DVD player in a dry environment at normal room  
temperature. First remove the currently inserted disc from the disc tray.  
Then leave the DVD player switched off for at least one hour without using  
until the condensation film has evaporated.  
Remote control not functioning  
A
B
C
Check to make sure that the remote control batteries have been inserted  
into the battery compartment with the correct polarity.  
Check to see if the remote control batteries are exhausted and, if necessary,  
change both batteries.  
Make sure that there are no obstacles located between the remote control  
and the DVD player.  
No image or Black/White image only  
D
Remain within five meters of the DVD player when using the remote control.  
A
Check to make sure that all connection cables between the DVD player  
and the television (or Video projector) are firmly inserted into the  
corresponding sockets  
Playback language/ Subtitle language do not correspond to the  
settings in the OSD menu  
B
Check to make sure that the settings in the OSD menu match the connections  
variant, with which you have connected the DVD player to the television  
(or Video projector).  
The playback language/Subtitle language setting in the OSD menu is not  
available on the inserted disc.  
One or several functions can not be switched on  
For this see chapter 8. "Connecting the DVD player to a television".  
The selected functions may not be available on all DVDs/VCDs/S-VCDs!  
C
Check by means of the televisions (or Video projectors) operating  
instructions to see if settings to the television (or Video projector) may  
be necessary in order to use the DVD player with the television.  
If you attempt to execute a function that is not available, the symbol  
displayed on the television screen.  
is  
None of the buttons on the device or on the remote control are  
functioning/other malfunctions  
No sound  
A
Check to see if the television and/or DVD player have possibly been  
switched to mute.  
Check to see if all connection cables between the DVD player and potentially  
connected audio components are plugged firmly into the corresponding  
sockets.  
A
Switch off the DVD player by pressing the POWER switch. Wait ten seconds  
and then activate the POWER switch again to switch the DVD player on  
once more.  
In the event that the malfunction is still present: Reset the DVD player to  
its default settings.  
B
B
For this see chapter 10.6 "Setup menu PREFERENCE".  
Contact one of our service partners in your area if …  
the stated function defect can not be resolved as described or  
other functional defects arise.  
For this see chapter 19 "Warranty and service".  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Composite video  
18. Glossary / Key Word Index  
Video signal or FBAS signal; thereby it involves an image signal, in which  
colour and brightness information are included at the same time.  
What are DVDs, VCDs and S-VCDs?  
Progressive scan  
In the normal way TV devices and Video projectors are controlled with so  
called "Half images". Thereby clearly visible line structures develop. Contrary  
to this, Progressive Scan denotes the output of full images (with this DVD player,  
at the output YPbPr) Progressive Scan signals can only be processed by play-  
back devices equipped for this purpose (in particular large screen televisions  
and projectors). The image quality as opposed to traditional image signals is  
considerably higher.  
DVDs  
DVD is the short form for "Digital Versatile Disc". DVDs are a storage medium  
for audio and video data; they are available in 8 cm and 12 cm (Diameter)  
formats. Because of the much higher storage capacity as compared to CD-Rs/  
CD-RWs DVDs can provide a playback duration of up to eight hours for the  
audio and video data stored on them.  
VCDs/S-VCDs  
YUV (component video out)  
"Video CD" (VCD) and "Super Video CD" (S-VCD) are designations for two  
processes of compressed storage, thus space saving, of films on CDs. VCDs  
and S-VCDs are available in 8 cm and 12 cm (Diameter) formats. Their storage  
capacity is a great deal lower than that of DVDs. For this reason they only  
offer a playback duration, for the saved audio and video data on them, of  
20 minutes (8 cm format) and/or 74 minutes (12 cm format).  
VCDs are available in two versions:  
YUV indicates the component signal, which with this device is available at the  
output YPbPr in the form of so called "Half images"; as a rule this is the best  
signal for the control of large screen televisions and projectors, which can not  
process Progressive Scan signals. As with the RGB image transmission, YUV is  
comprised of three separated image signals:  
the brightness signal "Y" and  
the two colour diferential signals "U/Pb" and "V/Pr"  
Only audio and video data can be played back on version 1.1  
VCDs/S-VCDs.  
Half images (Interlace)/Full images (Progressive Scan)  
PBC (Playback control) functions are available on version 2.0 VCDs/  
A standard television image is comprised of 576 visible lines; at first all odd  
and then all even image lines are displayed alternatively, thus each displays  
a half image. Thereby only 25 full images (50 Half images) can be displayed  
per second. This technique is designated as "Interlace" format.  
S-VCDs. In addition still images can be played back in a higher resolution.  
Playback Control (PBC)  
Version 2.0 VCDs/S-VCDs have Playback Control (in short "PBC") at their disposal.  
Then on the VCD/S-VCD a main menu is available, by which various functions of  
the VCD/S-VCD are allowed to be operated.  
Contrary to this with the so called progressive or "Progressive Scan" format  
all image lines are displayed every time, that is to say 50 full images per  
second are displayed. Thereby increasing the total quality of the images, still  
images and text for example appear sharper.  
What are Title and Chapter?  
Title is the name given to the largest units of image and sound units on DVDs;  
on many DVDs the (Main) film has the title number 01. For bonus material  
(i.e. Film trailer, background information etc.), that is available on many DVDs,  
other possible title numbers can be used.  
HDMI  
HDMI is short for "High Definition Multimedia Interface" and refers to a 19  
contact interface for complete digital transmission of audio and video data.  
With its high bandwidth HDMI handles all known today home electronics  
digital video and audio formats. HDMI transmits audio data up to frequencys  
of 192 kHz with text widths of up to 24 Bit on up to 8 channels. Thus not  
only all of today's image and sound formats introduced into home electronics  
including HDTV (up to the highest present resolution of 1080i) are transmitted  
without loss of quality but also future formats with yet higher resolutions.  
Chapter is the name given to the next smaller image and sound units beneath  
title. If the DVD/VCD/S-VCD or its title is divided into chapters, numbers are  
assigned to you, through the input of which the chapter can be selected direct.  
Bear in mind that not on all DVDs …  
are the DVD or the title divided into (numbered) chapters  
Chapters are also designated as "Scenes" (i.e. in the main menu of  
DVDs)  
Decoder  
The sound on DVDs with home theatre sound is saved on the DVD in encrypted  
(encoded) form. Different encryption formats exist for several purposes, for  
example AC-3 for the playback of Dolby Digital Surround Sound.  
In order to playback encrypted sound, the playback device (i.e. the DVD  
player) and/or the audio component connected to it (for example Surround  
system) must be equipped with a so called decoder, which converts the  
encrypted signal back into music and/or sound.  
What are Scart, S-Video, Composite-Video Progressive  
Scan, YUV and HDMI?  
Scart  
Scart denotes a 21 pole standardized plug connection, via which the RGB  
signal, video signal and S-Video signal as well as a number of control and  
auxiliary signals are transmitted.  
The Silvercrest KH 6524/KH 6525 DVD player is equipped with an AC-3  
Decoder (for Dolby Digital 5.1 Surround Sound signals).  
S-video  
Dolby Surround  
When the DVD player is connected to a television via S-Video the brightness  
and colour signals are transmitted seperately; in this way a greater image  
sharpness and a reduced so called "Colour noise" is achieved.  
Colour noise refers to the overlaying of the colours, mostly heavily saturated  
parts of a video image, through an irregular, restive breakdown structure.  
Dolby Surround is an analogue sound format, by which the two channels of  
a stereo sound signal are used in order to accommodate room sound information  
for further channels. Dolby Surround decoders convert the signals back into  
sound or music and send the audio to two additional speakers that are situated  
behind the listener.  
- 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dolby Prologic  
MPEG  
In comparison to Dolby Surround sound format, with Dolby Prologic an additional  
channel in the stereo signal is used; this is the so called "Centre" channel. The  
corresponding centre loudspeaker is to be situated in the middle between the  
stereo loudspeakers. The deepest sounds are fed to a bass loudspeaker, the  
so called "Subwoofer". The subwoofer can be placed in any desired location  
in the room; the logic for this is that the bass sounds that the subwoofer puts  
out can scarcely be localized exactely by the human ear  
MPEG ("Moving Picture Experts Group") refers to a video compression format.  
USB memory sticks  
The term USB memory stick refers to a plugable USB device, which is approximately  
the size of a cigarette lighter. The expression is only colloquial and not a designation  
for a type of product. For the most part with this expression is meant a USB  
device that serves as an interchangeable storage media.  
Dolby Digital (5.1)  
What are folders?  
Dolby Digital, also designated as AC3, is a digital sound format, by which up  
to six seperate audio channels can be transported. With most of the current  
DVDs, the sound is stored in the so called "Dolby Digital 5.1" format; the "5"  
in the name "5.1" stands for the three front and two rear surround sound  
channels, the "1" stands for the subwoofer channel.  
As opposed to audio CDs the title on a CD-R/CD-RW with MP3, WMA or  
JPEG files can be stored in folders, for example, in order to file titles from  
different genres.  
The structure of an MP3-CD can, for example, appear as follows, if the MP3  
files are stored in folders:  
DTS  
FOLDER  
MP3  
MP3-CD  
DTS is the abbreviation for "Digital Theatre System" and denotes one of the  
most common surround sound formats for DVDs. As with Dolby Digital 5.1,  
DTS uses three front and two rear surround sound channels as well as a bass  
sound channel.  
What are PAL and NTSC?  
PAL  
PAL is the abbreviation for "Phase Alternation Line". PAL is the mid and west  
Europe (Exception: France = SECAM) customary and widest distributed colour  
television standard.  
NTSC  
NTSC is the abbreviation for "National Television System Committee". NTSC  
is a colour television standard that is primarily used in the USA and Japan.  
19. Warranty and Service  
Audio CDs  
The warranty for this appliance is for 3 years from the date of purchase. The  
appliance has been manufactured with care and meticulously examined be-  
fore delivery. Please retain your receipt as proof of purchase. In the event of  
a warranty claim, please make contact by telephone with our Service Depart-  
ment. Only in this way can a post-free despatch for your goods be assured.  
The warranty covers only claims for material and maufacturing defects, but  
not for transport damage, for wearing parts or for damage to fragile compo-  
nents, e.g. buttons or batteries. This product is for private use only and is not  
intended for commercial use. The warranty is void in the case of abusive and  
improper handling, use of force and internal tampering not carried out by our  
authorized service branch. Your statutory rights are not restricted in any way  
by this warranty.  
Audio CDs contain exclusively audio data; they are also available in 8 cm  
and 12 cm (Diameter) formats. The playback duration for the audio data stored  
on them amounts to 20 minutes (8 cm format) and/or 74 minutes (12 cm format).  
Audio data is stored on audio CDs in CDA format.  
MP3  
MP3 denotes a process and/or format developed by the Fraunhofer Institute  
for the compression of audio data. In the MP3 format compressed music pieces  
are only a fraction of their original size, which, for example, on CD-Rs/CD-RWs  
allows for storage of a considerably greater volume of music than on com-  
mercially available audio CDs, on which audio data is stored in the CDA format.  
The warranty period will not be extended by repairs made under warranty.  
This applies also to replaced and repaired parts. Any damage and defects  
extant on purchase must be reported immediately after unpacking the appli-  
ance, at the latest, two days after the purchase date. Repairs made after the  
expiration of the warranty period are subject to payment.  
WMA  
WMA ("Windows® Media Audio") is a data format developed by Microsoft®  
for audio data.  
JPEG  
JPEG ("Joint Photographics Expert Group") denotes a wide spread graphic  
format, developed by the organization with the same name, with which  
image data of the colour and grey scales are compressed.  
20. Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
44867 BOCHUM, GERMANY  
- 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
DVD Player KH6524/25  
In order to guarantee a cost free repair procedure please  
get in touch with the service hotline. Make sure you have  
your sales slip handy.  
DES UK LTD  
Tel.: 0871 5000 700 (£ 0.10 / minute)  
Kompernass Service Ireland  
Tel.: 1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply. Mobile operators may vary.  
Sender, please write clearly:  
Last name  
First name  
Street  
City/Town  
Country  
Telephone  
Date/Signature  
Description of the defect:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Freezer IN FS 1211 UK User Manual
Intel Computer Hardware PT800DB User Manual
JBL Stereo Amplifier AVA7 User Manual
JL Audio Car Speaker M 770x User Manual
JVC Camcorder Accessories CB V240U User Manual
JVC Computer Monitor DT V9L3D User Manual
JVC Stereo Receiver LVT0014 001A User Manual
Kenmore Microwave Oven 99721 User Manual
Kenwood CD Player DPF J7020 User Manual
Kenwood Food Processor FP220 User Manual