Kompernass DVD Player KH 6517 User Manual

UK  
HDMI DVD PLAYER  
KH 6518  
KH 6517  
HDMI DVD PLAYER  
Operating instructions  
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: KH6517/18-11/07-V1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
PAGE  
1. Technical Data  
2. Applications and functions  
3. Package contents  
4. Operating elements  
5. Setting up of the DVD player  
6. Safety instructions  
7. Remote control  
4
4
4
4
5
5
6
7.1 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
7.2 Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
7.3 Replacing the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
8. Connecting the DVD Player to a television  
6
8.1 Connecting to a television via ScartCable/RGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
8.2 Connecting to a television via S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
8.3 Connection to a television via video input (Composite Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
8.4 Connection via component signal (YPbPr/progressive scan and YUV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
8.5 Connection via VGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
8.6 Connection via HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
9. Connecting audio components to the DVD player  
8
9.1 Requirements for the connection of a HiFi system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
9.2 Connecting digital audio components via digital cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
9.3 Connecting audio components via an analogue cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
10. OSD menu settings  
10  
10.1 Using the OSD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
10.2 Language Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
10.3 Video settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
10.4 Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
10.5 Rating settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
10.6 Misc settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
11. Initial operation of the DVD player  
14  
11.1 Inserting the DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
11.2 Inserting memory cards/USB memory stickswith MP3/WMA/ MPEG4/JPEG data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
11.3 Removing memory cards/USB memory sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
12. Playing back DVDs, VCDs or S-VCDs  
16  
12.1 Features during playback of a DVD, VCD or S-VCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
13. Playback of JPEG-Photo CD/WMA/MP3/MPEG4  
22  
Filter function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Repeat function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Change mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Rotation (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Enlargement (Zoom) (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
View (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Effects (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
14. CD Ripping function  
15. Cleaning of the DVD player  
16. Disposal  
23  
24  
24  
24  
25  
27  
27  
17. Troubleshooting  
18. Glossary / Key Word Index  
19. Warranty & Service  
20. Importer  
Read these operating instructions carefully before using the device for the first time and preserve this manual for later reference.  
Pass this manual on to whoever might acquire the device at a future date.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 3 -  
DVD-PLAYER KH6517/6518  
... generally of the data format CD Audio (.cda), MP3 (.mp3), Windows  
Media Audio (.wma), Audio Video Interleave (.avi), Nero Digital (.mp4)  
und JPEG (.jpg) on the storage media CD-R, CD-RW, USB memory sticks  
as well as Memory Cards of the type CF I, CF II, SD, MS, MSPro, MMC  
and SM.  
1. Technical Data  
This device has been tested and approved in accordance with the basic  
requirements and other relevent regulations of the EMC guidelines  
2004/108/EG as well as the guidelines for low voltage appliances  
2006/95/EG.  
You can connect to the Silvercrest KH 6517/ KH 6518 DVD player for image  
outputs during playback of DVDs, VCDs, S-VCDs, Audio CDs and the MP3  
data formats, Windows Media Audio and JPEG  
Power supply:  
Power consumption :  
AC 220 V - 240 V 50 Hz  
15 Watt  
Stereo and Mono televisions with the formats PAL or NTSC and the  
picture formats 4:3/16:9.  
~
Power consumption: Standby:0,7 W  
LCD/Plasma picture screens or video-projectors, if for this the corresponding  
connection potential is available and the connection of a DVD player is  
provided for/allowed by the manufacturer of the playback device  
Protection class:  
TV standard:  
II /  
PAL/NTSC  
Operating temperature:  
Humidity:  
Dimensions (L x W x H): 205 x 430 x 49 mm  
+5 +35°C  
~
5
90% (no condensation)  
You can connect to the Silvercrest KH 6517/KH 6518 DVD player for sound  
output, for example music…  
~
Weight :  
1,8 kg approx.  
from the speaker of one of the televisions connected to the DVD player  
from external audio components such as a HiFi system, receiver or sur-  
round sound system (analogue/digital)  
Video Output  
Output level:  
Horizontal resolution:  
Signal-to-noise ratio:  
1 + 0.2/-0.2 Vp-p (75 Ω)  
> = 500 Lines  
60 dB  
Attention!  
No liability/warranty will be assumed for damage resulting from improper  
use of the device!  
Audio Output  
Impedance:  
10 kΩ  
Output level:  
1.8 + 0.2/-0.8 Vrms (1kHz, 0dB)  
0.01 % (JIS-A 1kHz, typical)  
80 dB (JIS-A 1 kHz, typical)  
95 dB (JIS-A 1 kHz, typical)  
3. Package contents  
Harmonic distortion:  
Dynamic range:  
Signal-to-noise ratio:  
-
-
-
-
-
-
-
DVD-Player  
Infrared remote control  
2 Batteries for remote control, type AAA/ (Micro cells)  
RGB Scart cable  
Audio/Video RCA Cinch cable  
Nero Digital CD  
Digital audio output  
Coaxial output and optical output  
USB port  
Operating manual  
Readable  
USB memory sticks:  
USB1.1 and 2.0 up to a capacity of 1 GB  
4. Operating elements  
Memory card slot  
Readable memory cards: CFI/CFII (1 GB), SD (1 GB), MS/MSPro (1 GB),  
A. DVD player front panel  
MMC (1 GB), SM (1 GB)  
POWER button  
q
w
e
r
t
y
u
i
Disc tray  
OPEN/CLOSE button  
Display  
Standby light (green)  
IR Sensor for the remote control  
Front cover  
Memory card slot for SD/MMC/MS/MSPro and MS cards  
(behind the front cover)  
2. Applications and functions  
The SilverCrest KH 6517/ KH6518 DVD player is intended exclusively for  
stationary use in enclosed spaces. The device is intended exclusively for  
private, non-commercial use.  
This device is intended for use as an electronic entertainment device for the  
playback …  
Memory card slot for CompactFlash memory cards (CF I/ CF II)  
(behind the front cover)  
o
...of DVD videos in 12 cm and 8 cm (diameter) formats with Country/  
Regional code 2 or , designated by the Logo  
...of video formats MPEG4/MPEG4 ASP, AVI and Nero digital compressed  
videos.  
.
Green indicator light for memory card slot and USB port  
USB port  
a
s
(behind the front cover)  
... of video-CDs (VCDs) and Super video-CDs (S-VCDs) in 12 cm and  
SKIP BACKWARDS (-)/FORWARDS (+) button  
STOPBUTTON  
PLAY/PAUSEꢁꢂ button  
d
f
g
8 cm (diameter) formats, designated by the Logo  
... of audio-CDs in 12 cm and 8 cm (diameter) formats, designated by  
the Logo  
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 4 -  
B. DVD player rear panel  
5.Setting up of the DVD player  
S VIDEO: S Video output  
h
j
k
l
;
2)  
2!  
2@  
2#  
2$  
2%  
2^  
2&  
2*  
AUDIO OUT L/R: Left and right audio outputs  
EURO SCART: Scart/RGB output  
CENTER: Output for front and centre audio channels  
SL/SR: Output for rear, left and right audio channels  
FL/FR: Output for front, left and right audio channels  
VGA: VGA video output  
1. Carefully remove the DVD player and the supplied accessories from the  
packing.  
2. Remove the protective foil from the display.  
3. Place the DVD player on a flat, even and firm base.  
Attention!  
COAXIAL: Coaxial audio output  
Power cable  
Do not plug the DVD player into an electrical outlet at this time. Wait  
until you have connected the DVD player to a television set.  
OPTICAL: optical digital audio output  
HDMI: HDMI output  
SUBWOOFER: Output for bass audio channel  
Y, PB/CB, PR/CR: Component video outputs  
VIDEO: Composite video output  
In the event that you wish to change the type of video or audio connection  
you must first pull the power plug from the power socket! Otherwise  
the DVD player and possibly equipment connected to it could become  
irreparably damaged through voltage peak strikes!  
C. Remote control  
6. Safety instructions  
OPEN/CLOSE: Open/Close the disc tray  
DIMMER: Adjust the display brightness  
SKIP BACKWARDS (-)/FORWARDS (+)  
VOLUME +/-: Volume increase/decrease  
CLR: Clear the entry  
q
w
e
r
t
y
u
i
o
a
s
d
f
g
h
j
k
l
;
2)  
2!  
2@  
2#  
2$  
2%  
2^  
2&  
2*  
2(  
3)  
3!  
3@  
3#  
This device is not intended for use by individuals (including children) with  
restricted physical, physiological or intellectual abilities or deficiences in ex-  
perience and/or knowledge unless they are supervised by a person res-  
ponsible for their safety or receive from this person instruction in how the  
device is to be used.  
A-B: Repeat sequence  
MODE: Set the playback mode  
STOP: Stop playback  
Children should be supervised to ensure that they do not play with the  
device.  
To avoid unintentionally switching on the device pull the power cord  
from the mains supply after use and before cleaning.  
Check the device and all parts for visible damage. The safety concept  
can work only if the device is in a faultless condition.  
The power plug must always be easily accessible, so that the device  
can be quickly separated from the mains in the event of an emergency.  
PLAY/PAUSEꢁꢂ: Start/Suspend playback  
DVD/CARD/USB: Change between disc playback and USB/card playback  
OK: Confirm input  
Control buttons  
ZOOM: Set the image enlargement  
SEARCH: Access the search function  
ANGLE: Change the camera perspective  
MUTE: Switch the sound on/off  
MARK: Access the bookmark function  
RGB: Set the video signal to RGB  
YUV: Set the video signal to YUV  
Battery compartment (on the rear panel)  
HDMI: Set the HDMI output  
Risk of electrical shocks.  
Connect the device only to correctly installed and earthed mains sockets.  
Ensure that the rating of the local power supply tallies completely with  
the details given on the rating plate of the device.  
Arrange for defective power plugs and/or cables to be replaced at  
once by qualified technicians or our Customer Service Department.  
Arrange for customer service to repair or replace connecting cables  
and/or devices that are not functioning properly or have been damaged.  
VIDEO: Set the video output  
TITLE: Access the title menu  
MENU: Access disc menu  
SUBTITLE: Set the subtitle  
NEVER submerse the device in water. Wipe it only with a slightly  
damp cloth.  
AUDIO: Set the audio language/channel  
DISPLAY: Superimpose disc information  
SETUP: Access the OSD menu  
Do not expose the device to rain and never use it in a humid or wet  
environment.  
SLOW: Slow motion function  
Ensure that the power cable never becomes wet during operation.  
You must not open the housing or repair the device yourself. Should you  
do so, device safety can no longer be assured and the warranty will  
become void.  
F.RWD/F.FWD: Fast scan backwards/forwards  
PRG: Access the programme function  
Number buttons  
STANDBY : Switch the device to standby mode  
Protect the device against drip and spray water. Do not place any water-  
filled vessels (e.g. flower vases) on the device.  
Risk of fire!  
Do not use the device in the vicinity of hot surfaces.  
Do not locate the device in places exposed to direct sunlight, If you do,  
it may overheat and become irreparably damaged.  
Do not leave the device unattended when in use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 5 -  
Never cover the ventilation slots of the device while it is being used.  
Do not place any open sources of fire, like candles, on the device.  
Attention!  
No liability/warranty will be considered for damage to the DVD player  
caused by the effects of moisture, water penetration or overheating!  
Injury hazard  
Keep children away from the connecting cable and the device. Children  
frequently underestimate the dangers of electrical devices.  
Ensure that the device stands with a safe and secure positioning.  
Do not operate the device if it has sustained a fall or is damaged. Arrange  
for the device to be checked and/or repaired by qualified technicians.  
Keep batteries away from children. Children can put batteries into their  
mouths and swallow them.  
7. Remote control  
7.1 Inserting the batteries  
1. Open the battery compartment on the rear of the remote control.  
2. Place the two supplied batteries type AAA (micro cells) into the battery  
compartment. Make sure that the batteries are inserted in accordance  
with the correct polarity.  
Danger! Laser radiation!  
This device is fitted with a „Class 1 Laser“.  
• Never open the device.  
3. Replace the battery compartment cover.  
7.2 Using the remote control  
• Never attempt to repair the device.  
In order to guarantee faultless operation when using the remote control…  
• There is invisible laser radiation inside the device.  
Do not expose yourself to the laser beam.  
Always point the remote control, during use, directely at the DVD player  
Make sure that there are no obstructions between the remote control  
and the DVD player that will hinder reception.  
Note:  
When using the remote control place yourself not more than 5 metres  
from the DVD player  
Some aggressive furniture finishes can have a destructive influence on  
the device's rubber feet. If necessary, place the device on a nonslip pad.  
otherwise interferences can occur during operation of the DVD player functions  
with the remote control.  
Thunderstorms!  
Equipment connected to a power supply can be damaged during a  
thunderstorm. You should therefore always pull the power plug from  
the power socket when there is a storm.  
7.3 Replacing the batteries  
If the operation of the DVD player via the remote control does not function  
properly or does not function at all the batteries must be replaced  
Notice regarding electrical power surges (EFT /  
electrical fast transient) and electrostatic discharges:  
Always renew all batteries in order to return the remote control to its  
full performance ability.  
In a case of malfunction due to an electrical fast transient (power surge)  
and/or electrostatic discharge, the device must be returned to default  
settings in order to re-establish normal operation. Possibly the power  
supply must be separated and then reconnected. The batteries (if pre-  
sent) must be removed and then reinserted.  
8. Connecting the DVD Player to a television  
After setting up the DVD player, you can now connect it to a television. The  
DVD player can be connected to televisions which operate with the PAL and  
NTSC standards.  
If you want to use the DVD player on a television with the NTSC standard  
you must change the video setting in the DVD players "OSD menu".  
There PAL is set as the television standard at the factory.  
Notice regarding separation from mains-power  
The POWER switch does not completely disconnect the device from the  
power network. Additionally, the device consumes power when in stand-  
by-mode. To completely separate the device from mains-power, the power  
plug MUST be removed from the wall socket.  
On this topic see also chapter 10.3. "Video settings: Setting the  
TV standard".  
Information regarding the handling of batteries  
The remote control is operated by batteries.  
For the handling of batteries please observe the following:  
Depending on the televisions equipment there are different methods of  
connecting the DVD player to it, these are explained as follows.  
Risk of explosion!  
Do not throw batteries into a fire. Do not recharge the batteries.  
Never open batteries, never solder or weld batteries.  
The risk of explosions and injuries exists!  
Regularly check the condition of the batteries. Leaking batteries can  
cause damage to the device.  
If you do not intend to use the device for an extended period, remove  
the batteries.  
In the event of the batteries leaking acids, wear protective gloves.  
Clean the battery compartment and the battery contacts with a dry  
cloth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 6 -  
8.1 Connecting to a television via ScartCable/RGB  
Note:  
8.3 Connection to a television via video input (Composite  
Video)  
For this connection variant the television must be equipped with Audio/Video  
cinch sockets (Composite Video).  
In order to connect the DVD player to a television via Composite Video you  
will need  
Connecting the DVD player to a television with a Scart cable via the RGB  
input offers a high quality connection. Select this connection variation in  
the case of televisions equipped with an RGB input. If you are not sure if  
the television is equipped with an RGB input then you can check this by  
consulting the television's instruction manual.  
an audio/video RCA cinch cable (supplied)  
Connect the yellow marked video socket with the yellow VIDEO socket  
on the television.  
Connect the audio output sockets L/R on the rear panel of the DVD player  
to the corresponding audio inputs on the television.  
Connect the jack inscribed with EURO SCART to a television Scart socket by  
using the supplied Scart cable.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu Video/Video output/RGB.  
Make sure that the colour markings yellow, red and white correspond.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu item Video/Video output/RGB.  
On this topic see also chapter 10.3 "Video settings: Video output.  
8.2 Connecting to a television via S-Video  
Note:  
On this topic see also chapter 10.3 "Video settings: Video output.  
8.4 Connection via component signal (YPbPr/progressive  
scan and YUV)  
This connection variant is only possible with very high grade televisions,  
LCD/Plasma screens or Video projectors  
Check with the instruction manual of the corresponding playback device to see  
if this connections variant is available. It is possible that additional playback  
device settings may have to be implemented.  
For this type of connection the television must have available an S VIdeo  
input and two audio "IN" cinch sockets. If you are not sure if the television  
is equipped with S Video and/or cinch sockets you can check this by  
consulting the television's instruction manual.  
For this connection variant you will need:  
an audio cinch cable (not supplied)  
an S-video cable (not supplied) These can be obtained from your dealer.  
The so called "Component signal" is put out via the YPbPr socket of the DVD  
player. Component signals are available in the form of the so called "YUV"  
signal (Half image) as well as in the form of the so called "YPbPr" signal  
(Full image/Progressive scan).  
To connect the DVD player to a television via S-video:  
On this topic, please refer to Section 18. "Glossary / KeyWord  
Index“.  
Note:  
For both variants the television, to which you want to connect the DVD  
player, must be equipped with two audio "IN" cinch sockets.  
The cable connections are the same in both cases; YPbPr-signal for Progressive  
Scan however can only be used if the television (or Video projector), to which  
you want to connect the DVD player, is capable of Progressive Scan.  
If you are not sure whether the television (or Video projector), to which you  
want to connect the DVD player is capable of Progressive Scan and has  
cinch sockets available then you can check this by consulting the television's  
(or Video projectors's) instruction manual.  
Connect the jack inscribed with S-VIDEO to a television S-video socket  
using an S-video cable.  
Connect the audio output sockets L/R on the rear panel of the DVD player  
to the corresponding audio inputs on the television with an audio cinch  
cable.  
Make sure that the red and white colour markings correspond.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu Video/Video output/RGB.  
On this topic see also chapter 10.3 "Video settings: Video output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 7 -  
For both variations – "YPbPr" and "YUV"– you will need  
Make sure that the red and white colour markings correspond.  
an audio cinch cable (not supplied)  
an YUV cable (not supplied) These can be obtained from your dealer.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu item Video/Video output/VGA.  
On the rear panel of the DVD player you will find the three so called "Com-  
ponent Colour Out" sockets Y, Pb/Cb and Pr/Cr.  
On this topic see also chapter 10.3 "Video settings: Video output.  
Connecting the DVD player via component signal:  
8.6 Connection via HDMI  
This connection variant is only possible with very high grade televisions,  
LCD/Plasma screens or Video projectors  
Check with the instruction manual of the corresponding playback device to  
see if this connections variant is available. It is possible that additional play-  
back device settings may have to be implemented. For this type of connection  
you will need a HDMI cable (not supplied); this can be obtained from your  
dealer.  
Connecting the DVD player via HDMI:  
Connect the sockets Y (green), PB/CB (blue), and PR/CR(red) with the  
corresponding sockets on the television.  
Connect the audio output sockets L/R on the rear panel of the DVD player  
to the corresponding audio inputs on the television with an audio cinch  
cable.  
Make sure that the red and white colour markings correspond.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu item Video/Video output/Component  
and/or P-Scan.  
On this topic see also chapter 10.3 "Video settings: Video output.  
Connect the jack inscribed with HDMI using a HDMI cable to the  
corresponding socket on the television.  
For playback select the matching channel on your television Check with  
the television's instruction manual on how you can set the AV channel.  
In the OSD menu select the menu item Video/Video output/HDMI.  
8.5 Connection via VGA  
This connection variant is only possible with very high grade televisions,  
LCD/Plasma screens or Video projectors For this type of connection the tele-  
vision must have available a VGA input and two audio "IN" cinch sockets.  
Check with the instruction manual of the corresponding playback device to  
see if this connections variant is available. It is possible that additional play-  
back device settings may have to be implemented.  
On this topic see also chapter 10.3 "Video settings: Video output.  
For this connection variant you will need:  
9. Connecting audio components to the DVD  
player  
an audio cinch cable (not supplied)  
a VGA cable (not supplied) These can be obtained from your dealer.  
Besides sound playback of DVDs, VCDs/S-VCDs and audio and MP3 CDs  
via the speaker of the television, to which the DVD player is connected,  
sound can also be played back via external audio components such as a  
HiFi system, Dolby digital/DTS receiver or a surround sound system.  
Connecting the DVD player via VGA:  
9.1 Requirements for the connection of a HiFi system  
In order to enjoy a full sound experience when playing DVDs with the DVD  
player you can connect a HiFi system to the player. Before connecting check  
with the HiFi system's instruction manual to verify...  
if the HiFi system is suitable for connection to a DVD player.  
if the HiFi system is equipped with cinch sockets; if yes, you can connect  
the HiFi system to the DVD player via cinch cables.  
Connect the jack inscribed with VGA using a VGA cable to the correspon-  
ding socket on the television.  
Secure both plugs of the VGA cable with the screws.  
Connect the audio output sockets L/R on the rear panel of the DVD player  
to the corresponding audio inputs on the television with an audio cinch  
cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 8 -  
Connecting a HiFi system:  
Connecting via optical cable  
To connect the DVD player to a digital audio component with an optical cable:  
Remove the protective plug from the COAXIAL inscribed socket on the rear  
panel of the DVD player and insert the optical cable plug.  
Insert the plug at the other end of the optical cable in the corresponding  
socket of the digital audio component.  
Note:  
The optical cable is a glass fibre cable and must not be bent during in-  
stallation. Otherwise the glass fibre contained in the cable could break  
and the cable would become unusable.  
Connect the audio output sockets L/R on the rear panel of the DVD player  
to the corresponding audio inputs on the HiFi system with an audio cinch  
cable.  
Make sure that the red and white colour markings correspond.  
Check with the instruction manual which settings on the HiFi system may  
be necessary in order to reproduce sound via the HiFi system during the  
playback of a DVD, VCD/S-VCD, Audio or MP3 CD from the DVD player.  
Note:  
For an optimal sound experience place your HiFi system's loud speakers  
to the left and to the right of the television, on which you connected the  
DVD player.  
Note:  
If you connected the DVD player to the television via a Scart cable the Audio  
signal will be transmitted via the cinch cable to your HiFi system as well as via  
the Scart cable to the television. In this case, set the volume of the television  
to the lowest value.  
Make sure that no dirt can enter into the optical cable socket. This could  
cause signal interference. Always insert the protective plug into the socket  
if no optical cable is connected.  
9.2 Connecting digital audio components via digital cables  
In order to enjoy sound playback throughout the room from correspondingly  
equipped DVDs (recognizable by the Dolby Digital or DTS logos), you can  
connect the DVD player to a digital audio component, for example, a Dolby  
Digital or DTS receiver or a suitable surround sound system.  
you can purchase the necessary cables for the hereafter described connection  
variants from your dealer.  
Firstly check with the digital components instruction manual to see if it allows  
for connection to the DVD player...  
via a coaxial cable  
or via an optical cable.  
Connection via coaxial cable  
To connect the DVD player to a digital audio component with a digital coaxial  
cable:  
Connect the COAXIAL inscribed socket to the corresponding socket on the  
digital audio component.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 9 -  
9.3 Connecting audio components via an analogue cable 10. OSD menu settings  
If a digital input is not available on the audio component you can connect  
the DVD player to it via conventional analogue cinch cables.  
All possible settings on the DVD player can be administered with the remote  
control via the so called "OnScreen display" menu (in short "OSD Menu").  
The OSD Menu will be superimposed on the television screen.  
Before you use the DVD player for the first time for playback of DVDs,  
VCDs/S-VCDs or Audio-/MP3-CDs you must implement a few settings via  
the OSD Menu. These settings are dependent amongst others on...  
the language, in which you want the OSD Menu to be displayed  
which TV standard corresponds to the television, to which you want to  
connect the DVD player  
To connect the DVD player with analogue cables:  
Which image format your television can display  
Plug a cinch cable into each of the sockets FL (front left channel), FR  
(front right channel), SL (rear left channel), SR (rear right channel), CENTER  
(front centre channel) and SUBWOOFER (Bass) on the rear panel of the  
DVD player.  
Administering settings via the OSD menu  
First insert the connector plug of the DVD player's power cord into a  
power socket.  
insert the cinch cables into the corresponding analogue inputs of the  
audio component.  
To switch on the DVD player press the POWER button on the front panel of  
the DVD player. If the DVD player is already switched on but is in stand-  
by mode, press the button STANDBY on the remote control to switch the  
DVD player on. Standby mode is indicated by the green LED on the  
front panel of the device.  
The device will check to see if a disc is inserted. The SilverCrest logo appears  
on the television screen:  
If there is no disc inserted the notice NO DISC appears on the television  
screen and NO DISC is shown in the display.  
Firstly please familiarize yourself with the OSD Menu's operation by  
means of the following brief introduction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 10 -  
10.1 Using the OSD Menu  
10.3 Video settings  
To access the DVD players OSD menu press the SETUP button on the  
In this OSD menu you can administer the settings for Image format, Screen  
mode, TV standard, Video output, Brightnesst, Contrast, HD resolution and  
HD-JPEG mode.  
remote control.  
The OSD Menu with its menu options will appear on the television  
screen:  
Aspect Ratio:  
Here you set the Image format, in which the film should  
be displayed on the television screen (4:3 or 16:9). The  
correct setting depends on the television to which you  
would like to connect the DVD player.  
The following menu options can be set:  
Languages, Video, Audio, Age release and Diverse.  
The control buttons  
To confirm a selection or input press the OK button.  
To exit the selected OSD Menu option press the control button , until  
the left Menu tab (Language, Video etc.) is active. Select another Menu  
will move you through the OSD Menu.  
View  
Mode:  
Here you can match the vertical and horizontal image  
display to the playback device in use. The following can  
be set:  
tab with the control buttons  
with the control button  
To exit the OSD menu press the SETUP button again.  
and activate the OSD Menu option  
Stretch, Original, Height adaption, Width adaption,  
Auto adaption , Pan Scan (Adapting the width image  
format to 4:3 presentation).  
.
TV system:  
Video-Out:  
Here you set the TV standard (NTSC/PAL/Multi) of your  
playback device. Only set Multi if you have connected the  
DVD player to a multi-standard television.  
Here you set the Video output, through which the DVD  
player is connected to the playback device.  
10.2 Language Settings  
You can preset the languages for the Menu language, Subtitle, DivX subtitle,  
Audio and DVD menu functions. These settings are valid for every DVD if the  
selected language is present on the DVD.  
Component  
Output in YUV format via the  
component outlets  
RGB  
Output in RGB format via the  
SCART outlet, the S-Video outlet  
and the Composite video outlet  
Output in Progressive scan format  
via the component outlets  
Output in VGA format via the  
VGA outlet  
P-Scan  
VGA  
HDMI  
Output in HDMI format via the  
HDMI outlet  
OSD  
Language:  
After selection of a video output press the OK button to confirm. An  
enquiry window appears.  
Select the input Yes to carry out changes to the video output.  
Here you set the language, in which the OSD Menu will  
be displayed on the television screen.  
DVD Subtitle:  
Here you set the language of the subtitle when the playback  
of a DVD is displayed on the television screen (only if the  
language is present on the DVD).  
After the video output is changed another inquiry window appears.  
Select the input Yes when the image is correctly depicted. The video  
output is now changed.  
DivX Subtitle:  
Audio:  
Here you set the character encoding for the DivX Subtitle.  
The standard setting is Unicode.  
Select the input No if the image is not correctly depicted or wait 15 se-  
conds to return to the previous video output setting.  
Here you set the language, in which the DVD should be  
started. Films can then only be played back in the language  
that you selected if this language is available on the DVD. If  
the selected language is not available the DVD will start with  
another language.  
Note:  
When switching from the setting HDMI to the setting RGB the display  
will not return to the previous setting after 15 seconds. In this case select  
the input No.  
DVD Menu:  
Here you set the language, in which the DVD Menu will  
be displayed on the television screen. Not all films contain  
a menu on the DVD. If a menu is available then it can only  
be shown in the language that you set if this language is  
available on the DVD. If the selected language is not avai-  
lable then the DVD Menu will be displayed in another  
language.  
Note:  
Should image errors occur during output via a VGA device, change the  
setting in the TV standard menu to Multi.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 11 -  
Attention!  
Subwoofer:  
Test tones:  
Set this entry to Present when a subwoofer is connected  
and is to be activated.  
In order to deactivate this sound output set the entry to  
None.  
Here you can switch on a test sound for each particular  
audio output in order to check your 5.1 Surround settings.  
In the event that you set an incorrect Video output, for example "P-Scan",  
although your television is not capable of Progressive Scan, then the tele-  
vision screen will suddenly become black.  
This is not a defect of the television or the DVD player!  
In this case press the STOPbutton on the front panel of the DVD player  
or on the remote control.  
Surround  
Center,  
delay:  
Then press the VIDEO button on the remote control continuously until an  
image appears again on the television screen.  
Here you set the delay for the centre and rear surround loud-  
speakers. Each increase of the distance setting corresponds  
to a delay of one millisecond. With optimal settings the  
sound reaches your ears simultaneously from all directions.  
Brightness:  
Here, with the control buttons  
value (1-16) of the DVD player.  
Here, with the control buttons  
value (1-16) of the DVD player.  
, you set the brightness  
, you set the contrast  
Contrast:  
Center:  
Surround: No delay, 1, 2, 3, 4 or 5.1 m  
Digital output: here you set the DVD players digital output signal.  
Off: No digital audio component connected  
No delay, 0.3, 0.6, 1, 1.4, 1.7 m  
HD resolution: Here you can select from several resolutions for the HDMI  
output. Check, using the playback device's instruction manu-  
al, which resolutions  
PCM: Two channel digital audio component connected  
via coaxial cable or optical cable.  
RAW: Multi channel digital audio component, i.e. DTS  
receiver, connected via coaxial cable or optical  
cable.  
(480p/576p/720p/1080i/1080p/Auto) are supported.  
In the Auto setting the resolution 720p is used.  
HD-JPEG Mode: Here you can select from several resolutions for the image  
display via the HDMI Output.  
Night mode:  
ProLogic:  
Here you activate/deactivate the night mode. This setting  
facilitates an optimal sound playback with reduced volu-  
me. The loud passages are suppressed and the quieter  
passages are played back a little louder. This function is  
only possible when using a digital audio component.  
Here you set the Dolby ProLogic compatibility.  
10.4 Audio settings  
In this OSD menu you can administer the settings for Bass Management, the  
Speaker size of individual loud speakers, Test sound, Delays, Digital audio  
outputs , Night mode and ProLogic.  
Off:  
No Dolby Prologic compatible audio component  
is connected to the analogue stereo output (L/R).  
A Dolby Prologic compatible audio component is  
connected to the analogue stereo output (L/R) of  
the DVD player.  
ON:  
Bass  
management: Here you can Activate/Deactivate the Bass-Management.  
Activation (On) is necessary if you are not using a 5.1 am-  
plifier with its own speaker management but rather want  
the sound output transmitted via a particular amplifier. In  
this case the DVD player must be informed which kind of  
speaker (Small/Large) is to be run from the respective  
sound output. In this way the sound and the separation of  
Highs, Middles and Basses can be optimally conformed.  
Front LS,  
Center LS,  
Surround LS:  
Here you can Activate/Deactivate the particular speaker  
type and set the size.  
Large: Activate sound output for large speakers.  
Small: Activate sound output for small speakers.  
(only with the activation of Bass-Management)  
None: Deactivate sound output for these types of speakers  
Note:  
The input Front LS can not be deactivated since sound output for the  
front speakers is always switched on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 12 -  
10.5 Rating settings  
In this menu you can administer the settings for child security and change the  
password.  
10.6 Misc settings  
In this menu you can reset the DVD player to the factory default settings and  
set the playback priority of DVDs.  
Note:  
Only a few DVDs have a technical age restriction available. If there is no  
technical age restriction on the DVD your DVD players child lock feature  
can not be activated. The child lock can only function if it is activated on  
the DVD player and a corresponding code is available on the inserted  
DVD. When you insert a DVD which, according to the child lock, may  
not be played a window appears on the screen, in which you must enter  
your password and confirm with OK.  
Default  
settings:  
Here you reset the DVD player's factory default settings.  
DVD-Priority:  
Here you set whether the music or film material has priority  
when playing back audio DVDs that have additional film  
material.  
DVD-AUDIO:  
DVD-VIDEO:  
Music playback has priority.  
Film material in Dolby 5.1 has  
playback priority.  
Parental control: Here you set the age release class in three levels.  
G:  
Only DVDs without age restrictions  
can be played back.  
PG-13:  
Adults:  
No DVDs with an age release from  
13 years can be played back.  
All DVDs, including those with age  
restrictions over 18 can be played.  
In order to activate the age release class you must select from the OSD menu  
Rating the item Class and enter the password (8888). Confirm your entry by  
pressing the OK button. Select the item Class again and now set the desired  
child lock level. Confirm your entry by pressing the OK button.  
Set password: Here you can change the preset password (8888) and  
enter your own password. Only the numbers 0-9 can be  
used.  
To change the password select from the OSD menu the item Change password.  
Enter the valid password. Confirm your entry by pressing the OK button.  
Select the item Change password again and enter the new password.  
Confirm your entry by pressing the OK button.  
Note:  
In the event that you forget your new password you can use the factory  
preset password (8888).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 13 -  
11. Initial operation of the DVD player  
11.2 Inserting memory cards/USB memory sticks  
with MP3/WMA/ MPEG4/JPEG data.  
After you have …  
placed the DVD player in a suitable location  
connected the DVD player to a television by one of the designated  
connection options  
connected the DVD player, if desired, to a HiFi or Surround system  
(analogue/digital) for example a Dolby Digital or DTS receiver  
made the remote control ready for operation by inserting the batteries  
and know how to activate and operate the OSD menu with the remote  
control  
Note:  
The DVD-Player always starts in DVD mode. To read memory cards you  
press the button "DVD/Card/USB" on the remote control. The DVD player  
recognizes the data formats JPEG, MP3, WMA and MPEG4.  
Always only insert one memory card in the DVD-Player. The DVD-Player al-  
ways reads the data from the bottom compartment for the CF I/CF II-Card.  
If a memory card is inserted here, the data in the upper slot is not read.  
In order to insert memory cards of types CFI/CFII , SD, MS/MSPro, MMC  
and SM into the DVD-Player:  
… the DVD player is ready for operation.  
11.1 Inserting the DVD  
To play a disc with the DVD player:  
Switch on your television.  
Make sure that the DVD player is ready for operation.  
Switch on your television.  
Make sure that the DVD player is ready for operation.  
If the television, the DVD player and possibly other connected devices (i.e. an  
audio component) are ready for operation and are switched on and the DVD  
player is connected correctly to the television you will now see the Silvercrest  
logo on the TV screen  
If no disc is inserted into the DVD player's disc tray: No disc is displayed on  
the television screen.  
If the television, the DVD player and possibly other connected devices (i.e. an  
audio component) are ready for operation and are switched on and the DVD  
player is connected correctly to the television you will now see the Silvercrest  
logo on the TV screen  
If no disc is inserted into the DVD player's disc tray:  
No disc is displayed on the television screen.  
Open the memory card slot front cover on the front panel of the DVD  
player.  
Open the disc tray by pressing the button OPEN/CLOSE on the remote con-  
trol or on the front panel of the DVD player. Open is displayed on the  
television screen.  
Now slide the memory card into one of the memory card slots. Then  
proceed with the following steps depending on the type of memory  
card that you want the device to read.  
Insert the disc in the disc tray with the inscribed/labled side up. For  
twin-sided discs: The side you would like to play must face down.  
After you have inserted the disc press the button OPEN/CLOSE on the  
remote control or on the front panel of the DVD player again to close  
the disc tray.  
Warning!  
Always be sure to insert the memory cards into the memory card slots  
as described below! Never bend the memory cards while inserting them  
into the memory cards slots! With gentle pressure slide the memory card  
into the memory card slot as far as it will go.  
The contents of the disc will now be loaded; this may take a few se-  
conds. In the meantime Reading... is displayed on the television screen.  
Allow the memory card to slide in without force:  
Check to make sure that the memory card is one that the DVD player is  
capable of reading. Do not attempt to insert memory cards of a different  
type into one of the memory card slots!  
Make sure that you have inserted the memory card into the memory  
card slot in the correct manner.  
Under no circumstances attemt to force the memory card into the memory  
card slot!  
Otherwise the DVD player, memory card and the data on the memory card  
could be damaged!  
Supported memory card types and capacities  
Memory cards of the types CFI/CFII (1 GB), SD (1 GB), MS/MSPro (1 GB),  
MMC (1 GB) and SM (1 GB) can be read.  
Note:  
Your DVD player can only read storage mediums with several data  
formats if each folder contains only one data format.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 14 -  
SmartMedia memory cards (SM)  
MermoryStick memory cards (MS/MSPro)  
MemoryStick memory cards must be inserted into the upper memory card  
slot. Slide the MS memory card into the upper memory card slot, level and  
with the contacts facing forward.  
With this the side of the memory card, on which the contacts are located  
must face downwards with the chamfered corner facing to the left.  
Note:  
Only SmartMedia memory cards of type 3.3 V can be used! SmartMedia  
memory cards of type 5 V cannot be used!  
You can easily distinguish SmartMedia memory cards by means of the following  
diagram:  
5 V  
3.3 V  
You must insert the SmartMedia memory cards (3,3V) into the upper memory  
card slot. Insert the SM memory card into the upper memory card slot  
straight and with the contacts forward.  
With this the side of the memory card, on which the contacts are located  
must face upwards with the chamfered corner facing to the right.  
USB memory sticks (USB)  
The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity  
of 1GB.  
CompactFlash memory cards (CF I/CF II)  
USB memory sticks must be inserted into the USB port.  
CompactFlash memory cards types 1 and 2 must be inserted into the lower  
memory card slot. Insert CFmemory cards into the upper memory card com-  
partment contacts first and straight.  
The side of the memory card with the manufacturer's logo label must face up.  
MultiMediaCard- /SecureDigital memory cards (MMC/SD)  
MultiMediaCard/SecureDigital memory cards must be inserted into the upper  
memory card slot. Insert the MMC-/SD memory cards into the upper memory  
card slot straight and with the contacts forward.  
Press the DVD/CARD/USB button on the remote control. If several memory  
mediums are inserted select, with the control buttons , the input USB.  
Subsequently press the OK button to show the contents of the USB data  
carrier.  
With this the side of the memory card, on which the contacts are located  
must face downwards with the chamfered corner facing to the right.  
This procedure also applies to particular memory cards.  
If the USB memory stick is properly inserted into the USB port and data  
is being transmitted the green indicator lamp beside the lower loading  
slot, lights up.  
11.3 Removing memory cards/USB memory sticks  
Memory cards/USB Memory sticks should only be removed after the memory  
card slot is deactivated. Thus avoiding the possibility of damage or data loss.  
Press the button DVD/CARD/USB on the remote control to return to the DVD  
mode. For this a disc must be inserted into the DVD player. The green  
control light next to the memory card slot will go out.  
You can now remove the memory card/USB memory stick from the  
memory card slot/USB port.  
Note:  
If, during the reading of a memory card/USB memory stick, the disc tray  
is opened reading of the card will stop.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 15 -  
12. Playing back DVDs, VCDs or S-VCDs  
Depending on the inserted DVD/VCD/S-VCD it is possible that the contents  
of the DVD/VCD/s-VCD will not playback immediately, rather first a selection  
menu appears on the television screen.  
To play back a DVD/VCD/S-VCD with the DVD player...  
Switch on your television.  
Make sure that the DVD player is ready for operation.  
In this event select the menu option which will start the playback of the film  
If the television, the DVD player and possibly other connected devices (i.e. an  
audio component) are ready for operation and are switched on and the DVD  
player is connected correctly to the television you will now see the  
"SilverCrest" logo on the TV screen  
with the control button  
on the remote control.  
To start playback of the film press the OK button on the remote control or press  
the PLAY/PAUSEꢁꢂ button.  
Play will be superimposed briefly on the television screen.  
In the display on the front panel of the DVD player, the following notices  
appear:  
With DVDs:  
"DVD"  
the number of the currently playing title and chapter  
the played back so far time of the currently playing DVD in hours,  
minutes and seconds  
In the case of VCDs/S-VCDs:  
"VCD" or "S-VCD"  
the number of the currently playing title  
the played back so far time of the currently playing VCD/S-VCD in  
hours,minutes and seconds  
Open the disc tray on the front panel of the DVD player by pressing the  
OPEN/CLOSE button.  
OPEN will show in the display on the front panel of the DVD player and  
Open will be displayed on the television screen.  
12.1 Features during playback of a DVD, VCD or S-VCD  
During the playback of a DVD/VCD/S-VCD you can use the following DVD  
player features...  
Pause playback  
To pause the playback of the inserted DVD/VCD/S-VCD...  
Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled  
side up.  
Press the OPEN/CLOSE button again to close the disc tray.  
CLOSE will show in the display on the front panel of the DVD player and  
Close will be displayed on the television screen.  
During playback press the PLAY/PAUSEꢁꢂ button.  
"" will appear in the display on the front panel of the DVD player and  
"Pause" will be displayed on the television screen.  
On the television screen you will see a freeze frame of the scene that has just  
been halted.  
The contents of the inserted DVD/VCD/S-VCD will now be loaded; this  
may take a few seconds. In the meantime LOADING flashes in the dis-  
play on the front panel of the DVD player and Read... is displayed on  
the television screen.  
To continue playback of the film press the PLAY/PAUSEꢁꢂ button.  
Playback of the inserted DVD/VCD/S-VCD starts automatically.  
Stop playback  
To stop playback of the film on the inserted DVD/VCD/S-VCD press the  
STOPbutton.  
Note:  
With Resume function  
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing  
the STOPbutton once the DVD player automatically saves the position where  
playback was interrupted. This function is called the "resume function". Stop  
[Play to continue] will be shown on the television screen. As soon as you press  
the PLAY/PAUSEꢁꢂ button again playback will continue from the saved position.  
Without Resume function  
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing  
the STOPbutton once and you press the STOPbutton a second time the saved  
position, at which you interrupted the playback, will be cleared. As soon as you  
press the PLAY/PAUSEꢁꢂ button again playback of the inserted DVD/VCD/  
S-VCD will start from the beginning.  
DVDs, VCDs and S-VCDs, that you want to playback with the DVD player  
possibly have a country code, which is printed on the DVD cover.  
The DVD player can only playback DVDs/VCDs/S-VCDs with the country  
code 2.  
If no country code is printed on the cover of a DVD/VCD/S-VCD...  
• but instead the symbol  
played back with the DVD player  
, then the DVD/VCD/S-VCD can be  
• then the DVD/VCD/S-VCD can possibly not be played back with the  
DVD player. You can check this by attempting to play back the DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 16 -  
Accessing the DVD menu (Menu)  
Skip to start of chapter (SKIP)  
Note:  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
This function may not be available on all DVDs! If you attempt to carry  
a function that is not available, the symbol  
sion screen.  
is displayed on the televi-  
out a function that is not available the symbol  
the television screen.  
will be displayed on  
With many films on DVDs there is a main menu on the disc which, apart from  
the option of playing back the main film, allows you to select from the following  
contents:  
With the SKIP FORWARDS (+) and SKIP BACKWARDS (-) buttons, within the film on the  
inserted DVD/VCD/S-VCD you can, during playback...  
skip forward to the beginning of the next chapter or  
skip backward to the preceeding chapter  
the subtitle and film dialogue languages  
direct chapter selection  
to playback the films bonus material (Background information, "Making  
of" etc.)  
The respectively selected chapter will playback immediately without having  
to press the PLAY/PAUSEꢁꢂ button. The number of the respectively selected  
chapter will be displayed on the front panel of the DVD player to the left of  
the played back so far time.  
If such a menu is present on the DVD inserted in the DVD player you can ac-  
cess it during playback by pressing the MENU button on the remote control.  
You can select particular menu items by pressing the control buttons  
on the remote control.  
Title number input via the number buttons  
To confirm the selected menu item press the PLAY/PAUSEꢁꢂ button or the OK  
button on the remote control.  
Note:  
This function may not be available on all DVDs! If you attempt to carry  
To return to playback press the MENU button on the remote control again.  
out a function that is not available the symbol  
the television screen.  
will be displayed on  
Note:  
Instead of using the Skip function you can also access a title from within the  
film of an inserted DVD/VCD/S-VCD directly by entering the title number via  
the number buttons 0 to 9 on the remote control.  
If you cancel playback by pressing the STOPbutton twice (Playback  
stop without resume function) access to the disc's main menu is no longer  
possible.  
To do this, during playback or when playback is cancelled, press the  
number buttons on the remote control that correspond to the title number  
that you want i.e. press the "3" button for the third title or the buttons "1"  
followed by "0" for the tenth title. The entered numbers will be briefly  
superimposed on the television screen.  
Playback Control (PBC) with VCDs/S-VCDs  
Many VCDs/S-VCDs have Playback Control (in short "PBC"). Playback Control  
indicates a main menu that allows operation of several functions of the  
VCD/S-VCD.  
If PCB is available on a VCD/S-VCD inserted in the DVD player you must first  
activate it in order to be able to superimpose the menu.  
Then press the OK button on the remote control. Playback of the entered num-  
ber title will now start automatically.  
To do this press the MODE button on the remote control during playback  
or when playback has been stopped. The Play mode menu will be super-  
imposed on the television screen.  
Search function (Search)  
To select a title or chapter from the inserted DVD/VCD/S-VCD direct you can  
also use the search function:  
Direct chapter or time selection using the search function (Search)  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
a function that is not available, the symbol  
vision screen.  
The MODE menu item is automatically selected first. By pressing the  
OK button on the remote control you can select between the options Normal,  
Random and PBC. Set to PBC and press the MODE button again. The Play  
mode menu fades out and PBC is now switched on.  
is displayed on the tele-  
Entry of the time position via the search function  
To select a chapter by the input of a time position, during playback press  
the SEARCH button on the remote control. The Search Menu will be super-  
imposed on the television screen.  
Note:  
If you switch on PBC during playback it is possible that playback will be  
cancelled and starts again from the beginning.  
To superimpose the PBC main menu press the button MENU on the  
remote control during playback.  
The – – – marked entry field Title is automatically the first selection.  
Enter the desired title with the number buttons 0 to 9. On DVDs title 01  
is most often the main film.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 17 -  
Slow playback forward (Slow motion)  
Press the control button to select the – – – marked input field Chapter.  
Enter the desired chapter with the number buttons 0 to 9.  
Press the control button to select the – – : – – : – – marked input  
field Time. With the number buttons 0 to 9 enter the time position in  
hours, minutes and seconds.  
To playback the contents of the inserted DVD/VCD/S-VCD in slow motion …  
For slow playback forwards press the SLOW button repeatedly to set the  
following playback speeds:  
Example:  
To begin playback 1 hour, 5 minutes and 30 seconds from the start of  
a film press successively the number buttons …  
0, 1 for 1 hour;  
Note:  
0, 5 for 5 minutes;  
During slow motion playback no sound will be played.  
3, 0 for 30 seconds  
To continue playback from a selected position in normal speed, during  
slow motion playback press the PLAY/PAUSEꢁꢂ button. Play will appear  
on the television screen.  
Subsequently press the OK button to start playback at the selected position.  
If you want to remove a position from the entry field select the position to be  
removed with the control buttons  
control.  
and press the CLR button on the remote  
Image enlargement (Zoom)  
The display now skips back to "– – –".  
To fade out the Search menu press the button SEARCH again on the  
remote control.  
Note:  
This function may not be available on all DVDs! If you attempt to carry  
out a function that is not available the symbol  
the television screen.  
will be displayed on  
Fast scan forward/backward  
With fast scan you can select designated passages from the inserted DVD/  
VCD/S-VCD during playback.  
During the playback of an inserted DVD/VCD/S-VCD you can enlarge the  
image on the television screen in three levels. For this press the ZOOM button  
on the remote control to set the following enlargement levels:  
For fast scan forwards/backwards press the F.FWD and/or F.RWD  
button repeatedly to set the following fast scan speeds:  
AUS  
With the control buttons  
sections of the enlargement can be suspended.  
Note:  
To switch off the zoom function and return to the normal image size press the  
ZOOM button once more; Off will be displayed on the television screen.  
During fast scan no sound will be played back.  
To continue playback of the film from the selected position in normal  
speed, during fast scan press the PLAY/PAUSEꢁꢂ button. Play will appear  
on the television screen.  
Change camera aspect (Angle)  
Note:  
This function may not be available on all DVDs! If you attempt to carry  
out a function that is not available the symbol  
the television screen.  
will be displayed on  
Many films on DVD/VCD/S-VCD contain chapters which were recorded  
simultaneously from various camera perspectives. With films that have such  
chapters available you can view the same chapter from different perspectives.  
For this press the ANGLE button on the remote control during playback of an  
inserted DVD/VCD/S-VCD. Each press of the ANGLE button will switch to  
one of the available camera perspectives.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 18 -  
Superimpose/fade out subtitles  
Programmed playback (PRG)  
Note:  
Note:  
This function may not be available on all DVDs! If you attempt to execute  
This function may not be available on all DVDs/VCDs/S-VCDs! If you  
a function that is not available, the symbol  
vision screen.  
is displayed on the tele-  
attempt to execute a function that is not available, the symbol  
displayed on the television screen.  
is  
If the film on the inserted DVD/VCD/S-VCD has subtitles available you can  
superimpose these on the television screen during playback by pressing the  
SUBTITLE button on the remote control.  
With the "Programme" function you can put together your own film programme  
in so far as you can select only certain chapters of an inserted DVD/VCD/  
S-VCD for playback. In this way you can determine yourself the sequence,  
in which the chapters are played back. You can compile a maximum of  
16 chapters of a film for programmed play.  
With the first press of the  
SUBTITLE button the subtitle of the first available  
language will be superimposed on the television screen. With each further  
press of the SUBTITLE button the subtitles of other available languages will  
be superimposed successively on the television screen.  
Press the PRG button on the remote control during playback or when  
playback is cancelled.  
The Programme menu will be displayed on the television screen.  
The number of the currently superimposed subtitle language will be superim-  
posed on the television screen ( i.e. "1/10" for the first of ten available subtit-  
le languages).  
When the last of the available subtitle languages is superimposed (i.e.  
"10/10" for the tenth of ten available subtitle languages) you can switch off  
the subtitle function by pressing the SUBTITLE button again. OFF will be  
superimposed on the television screen.  
Change playback language  
Use the control buttons  
desired title.  
Confirm your selection by pressing the OK button. The chapter pertaining to  
on the remote control to select the  
Note:  
This function may not be available on all DVDs/VCDs/S-VCDs! If you  
the title appears.  
attempt to execute a function that is not available, the symbol  
displayed on the television screen.  
is  
With many films on DVD/VCD/S-VCD you can, during playback, select another  
playback language by pressing the AUDIO button on the remote control.  
The first press of the AUDIO button switches to the first available playback  
language. Each additional press of the AUDIO button switches to the next  
available playback language.  
The currently switched on playback language will be superimposed on the  
television screen.  
Use the control buttons  
desired chapter.  
Confirm your selection by pressing the OK button. The chapter will be  
filed on the first memory cell.  
Select with the control buttons  
on the remote control to select the  
further chapters and confirm your  
selection by pressing the OK button. The chapters will, in turn, be filed in  
the memory cells 1-16.  
To programme chapters of other titles select the entry with the control  
buttons  
and confirm your selection by pressing the OK button.  
To delete the last corresponding entry select with the control buttons  
the entry field Delete or press the CLR button once. By pressing  
the CLR button repeatedly always the last corresponding chapter input is  
deleted.  
To delete all inputs select, with the control buttons  
, the entry  
field Clear All and confirm your selection by pressing the OK button. All  
chapter entries will be deleted.  
What are Title and Chapter? On this topic, please refer to Section  
18. "Glossary / KeyWord Index“.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 19 -  
When you have programmed the desired chapter, select with the control  
buttons the option Start underneath the input fields. Press the OK  
button. The programmed playback now starts with the chapter  
In the case of VCDs/S-VCDs:  
the already played back time of the currently playing VCD/SVCD in  
hours, minutes and seconds  
entered in the programme memory cell 1.  
the time to the end of the currently playing film in hours, seconds and  
minutes  
Within the programmed chapter you can skip to the start of the next  
and/or previous chapter by pressing the SKIP FORWARDS (+) and SKIP BACK-  
WARDS (-) buttons on the front panel of the DVD player or on the remote  
control.  
To cancel the programmed playback press the STOPbutton on the  
front panel of the DVD player or on the remote control twice during  
playback.  
the type of inserted disc (VCD/S-VCD)  
the current title number/the total number of titles  
the current playback language setting  
To fade out the disc information press the "DISPLAY" button again.  
To switch on miscellaneous playback modes  
Note:  
Note:  
If you are not sure what the title and/or chapter number is that you want  
to programme, during playback select the corresponding title/chapter of  
the film with the SKIP FORWARDS (+) and SKIP BACKWARDS (-) buttons and then  
press the DISPLAY button on the remote control to superimpose all the in-  
formation from the inserted DVD/VCD/S-VCD onto the television screen.  
Here you will find, amongst others, the current title and chapter numbers.  
This function may not be available on all DVDs/VCDs/S-VCDs! If you  
attempt to execute a function that is not available, the symbol  
displayed on the television screen.  
is  
During playback of a DVD/VCD/S-VCD you can switch on the following  
playback modes:  
On this topic see also the section "Superimpose disc information".  
Random playback  
Programme example  
When you switch on the random playback the chapters on the inserted  
DVD/VCD/S-VCD will be played back in random order.  
To switch on the random playback …  
You want to enter the chapters with the numbers 03 and 10 of a film on  
a DVD/VCD/S-VCD for programmed playback; in this example the main  
film has the title number 01:  
During playback press the MODE button on the remote control. The Play  
mode menu will be superimposed on the television screen.  
• The first title is automatically highlighted in the programme menu.  
Confirm your selection by pressing the OK button.  
• The chapter of the first title now appears. With the control buttons  
select the third chapter and confirm the selection by pres-  
sing the OK button. The chapter will be filed on the first programme po-  
sition.  
• With the control buttons  
the selection by pressing the OK button. The chapter will be filed  
on the second programme position.  
select the tenth chapter and confirm  
The MODE menu item is automatically selected first.  
By pressing the OK button on the remote control you can select between  
the options Normal and Random (on VCDs/S-VCDs the option PBC  
is added). Set to Random and press the MODE button again. The Play  
mode menu fades out and the random function is now switched on.  
To switch off the random function press the MODE button during playback  
and select from the Play Mode menu under the menu item Mode, by  
pressing the OK button, the option Normal.  
• Select, with the control buttons  
the entry fields. Press the OK button. The programmed playback now  
starts with chapter 3.  
the option Start underneath  
Superimpose disc information  
When you press the MODE button again the random function is switched off.  
Note:  
Repeat function  
This function may not be available on all DVDs/VCDs/S-VCDs! If you  
With the repeat function on DVDs you can selectively repeat a title or chapter  
from the inserted DVD and with VCDs/S-VCDs repeat playback individual titles  
and/or the entireVCD/S-VCD.  
attempt to execute a function that is not available, the symbol  
displayed on the television screen.  
is  
With this function you can superimpose all the available information from a  
DVD/VCD/S-VCD inserted into the DVD player onto the television screen  
during playback.  
To switch on repeat playback, during playback press the MODE button on  
the remote control. The "Play mode" menu will be superimposed on the  
television screen.  
For this, during playback, press the DISPLAY button on the remote control.  
Press the control button to select the menu item Repeat.  
On the television screen will be superimposed:  
With DVDs:  
the already played back time of the currently playing DVD in hours,  
minutes and seconds  
the time to the end of the film in hours, seconds and minutes  
the type of inserted disc (DVD)  
the current title number/the total number of titles  
the current chapter number/the total number of chapters  
the current playback language setting  
the current selected subtitle setting  
the current selected perspective/the number of currently available  
perspectives  
the bit rate in Mbps  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 20 -  
With DVDs:  
By pressing the OK button you select between the options Single, Repeat all  
and Off.  
If you want to place another bookmark then press the control button  
to select Bookmark 2 in the superimposed field on the television screen.  
Press the OK button again as soon as the passage is reached, on which  
you want to place the second bookmark.  
Proceed in the same manner to place a third bookmark. Once you have  
placed all the desired bookmarks press the MARK button to fade out the  
bookmark menu from the screen.  
Select Single to continuously repeat the currently playing back chapter  
until repeat playback is switched off or playback is cancelled by pres-  
sing the STOPbutton twice.  
Select Repeat all to continuously repeat all the chapters one after the other,  
thus the entire film, until repeat playback is switched off or playback is  
cancelled by pressing the STOPbutton twice.  
Later if you want to skip to the passages, on which you have placed  
bookmarks press the MARK button again.  
In the case of VCDs/S-VCDs:  
By pressing the OK button you select between the options Single, Repeat all  
and Off.  
Select the desired bookmark with the control buttons  
.
Confirm the selection by pressing the OK button on the remote control.  
Playback of the selected chapter now begins automatically from the  
position, at which you placed the selected bookmark.  
To delete placed bookmarks press the MARK button on the remote control  
to access the bookmark menu. Select a bookmark and press the CLR button  
on the remote control.  
Select Single to continuously repeat the currently playing back title of  
the VCD/S-VCD until repeat playback is switched off or playback is  
cancelled by pressing the STOPbutton twice.  
Select Repeat all to continuously repeat the entire VCD/S-VCD until  
repeat playback is switched off or playback is cancelled by pressing  
the STOPbutton twice.  
To switch off repeat playback press the MODE button during playback.  
Select from the Play mode menu under the menu item Repeat the option  
Off. When you press the MODE button again, repeat playback is swit-  
ched off.  
Setting playback volume  
Press the VOLUME + button on the remote control during playback to increase  
playback volume or the VOLUME – button to reduce playback volume.  
The changing of the volume between the values "0" (Sound off) and "16"  
(Maximum volume) will be superimposed on the television screen.  
Repeat sequence (A – B)  
With this function you can repeatedly playback a favourite sequence inside  
Note:  
The volume can not be changed in HDMI mode.  
a chapter of the currently playing DVD/VCD/S-VCD.  
During playback press the A – B button on the remote control as soon as  
the desired sequence starts to playback. Repeat A will be displayed on  
the television screen.  
Press the A – B button again as soon as the end of the desired sequence is  
played back. Pay careful attention to the fact that the start and finish of  
the sequence must be located within a chapter. Repeat A-B will be dis-  
played on the television screen.  
Dimmer  
Press the DIMMER button on the remote control to reduce or increase the dis-  
play brightness of the DVD player. In the display appears HIGH (bright),  
NOR (normal), LOW (dark) or the display switches itself off.  
Mute playback sound (Mute)  
To switch the playback sound to mute press the  
control during playback of DVDs, VCDs/S-VCDs, Audio CDs and CD-Rs/ CD-  
RWs with MP3 or WMA data. The symbol will be displayed on the  
television screen. When you want to switch the playback sound back on  
press the MUTE button again or the VOL + and VOL – buttons.  
MUTE button on the remote  
Repeat playback of the selected sequence begins immediately without having to  
press the PLAY/PAUSEꢁꢂ button. The sequence will continuously repeat until  
you press the A – B button again in order to switch off the function. Repeat AB  
off will then appear briefly on the television screen.  
Bookmark function  
Switching off the DVD player  
During playback of a DVD/VCD/S-VCD you can place so called "Book-  
marks" in order to view again later selected passages from a film. You can  
set up to three bookmarks.  
To switch off the DVD player:  
In the event that a disc inserted into the DVD player is playing back, first  
cancel playback by pressing the STOPbutton on the front panel of the  
DVD player or on the remote control twice.  
During playback of a film press the MARK button on the remote  
control. On the television screen will be superimposed:  
Open the disc tray to remove a currently inserted disc from the DVD  
player by pressing the OPEN/CLOSE button on the front panel of the  
DVD player or on the remote control. Subsequently close the disc tray  
by pressing the OPEN/CLOSE button again.  
Press the  
STANDBY button on the remote control. The DVD player now  
switches to the STANDBY mode. To switch the DVD player back on press  
the STANDBY button again.  
To completely switch off the DVD player press the POWER button on the  
front panel of the DVD player.  
As soon as the passage is reached, on which you want to place a book-  
mark, press the OK button on the remote control. The exact time position of  
this passage within the film is now displayed in hours, minutes and  
seconds under Bookmark 1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 21 -  
13. Playback of JPEG-Photo  
CD/WMA/MP3/MPEG4  
Insert a storage medium into the DVD player. If you are using a memory card  
or USB memory stick press the DVD/CARD/USB button. With the control buttons  
select the desired medium and confirm your selection by pressing the OK  
button.  
The contents of the data carrier (CD, DVD, USB memory stick or memory card)  
will be displayed on the television:  
You shift in the data window by pressing the control button . Select the  
data that you want to include in your programme by pressing the OK but-  
ton. A tick appears in front of the selected data.  
When you have highlighted all the desired data select from the settings  
window Add to programme. The selected data will be listed separately.  
Select Programme view in the settings window to display only the selected  
data.  
To delete individual data from the programme list, tag the data with the  
OK button. The file will be marked with a tick.  
Then select Delete programme. The tagged files will be deleted from the  
programme list.  
Select the settings window Browser view to display the complete data  
list again.  
The data is listed on the left (Data window).  
In the upper right you can administer several settings: Filter, Repeat,  
Mode, Change mode, Programme view and Add to programme.  
In the lower right is the preview window, in which the JPEG image as  
well as its size is displayed.  
Select a data with the help of the control buttons  
. Confirm your  
selection by pressing the OK button. The data is implemented, i.e. the  
JPEG-Photo is displayed.  
Filter function  
You can filter out specific data types in the display.  
Switch to the settings window with the help of the control buttons  
.
Select Filter and confirm your selection with the OK button. By pressing the  
OK button you can now select which data type you want to filter out: Au-  
dio, Photo or Video.  
Press the control button  
to exit the Filter settings window.  
Rotation (JPEG images only)  
By pressing the control buttons  
crements of 90°.  
you can rotate JPEG images in in-  
Repeat function  
Select from the settings window the setting Repeat. By pressing the  
OK button you can select between Single, Folder and Off:  
Enlargement (Zoom) (JPEG images only)  
Press the ZOOM button on the remote control …  
- with the Single setting the current data is repeated until another setting is  
implemented.  
- with the Folder setting, all data in the current folder is played back.  
- the setting Off ends the repeat function.  
once for the first enlargement level; 1 is displayed on the television  
screen  
twice for the second enlargement level; 2 is displayed on the tele-  
vision screen  
Mode  
three times for the third enlargement level; " 3" is displayed on the tele-  
Select the Mode setting in the settings window. By pressing the OK button  
you can select between Normal, Random and Intro:  
vision screen  
With the control buttons  
sections of the enlargement can be suspended.  
- with the Random setting the data will playback in random order.  
- with the Intro setting 10 seconds of the MP3 data will be played back each  
time.  
To switch off the zoom function and return to the normal image size press the  
ZOOM button once more; Off will be displayed on the television screen.  
If you want to deactivate the change mode select the setting Normal.  
View (JPEG images only)  
During the JPEG playback press the TITLE button. Up to 9 images in small  
Change mode  
In the change mode you can put together your own programme.  
format will be displayed on the television screen.  
With the help of the control buttons  
you can select an image.  
Highlight the Change mode setting by pressing the OK button.  
By pressing the OK button the selected image will be displayed in large  
format.  
To turn to the next page press the SKIP FORWARDS (+) and/or SKIP BACKWARDS  
(-) buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 22 -  
Effects (JPEG images only)  
With the Effect function you can cross blend JPEG images with different effects.  
6. Select with the control buttons  
the input Rip Quality and press the  
OK button repeatedly to set the following MP3 qualities:  
Press the ANGLE button during playback. The type of cross blending  
will be displayed on the television screen:  
High:  
Optimal:  
128 Kbps  
320 Kbps  
Fade out downwards,  
Fade out upwards,  
Superimpose to the centre,  
Superimpose from the centre,  
Drape down,  
A higher quality will result in a greater quantity of MP3 data on the data  
carrier after copying.  
7. Select with the control buttons  
the input Start ripping and press the  
OK button to start copying to the storage medium.  
A window appears, in which is displayed the copying process with a progress  
Drape up,  
bar.  
Random screen effects,  
No screen effect.  
To prematurely abort the copying process select the input Cancel and con-  
firm with the OK button.  
Attention!  
14. CD Ripping function  
Never remove the USB memory stick/memory card from the USB  
port/memory card slot during the copying process! Otherwise it could  
lead to data loss on the storage medium.  
With the DVD player you can transfer music and speech data in the format  
.cda (CD Audio) or from a disc onto a USB memory stick or a memory card.  
With this the data will be saved to the data carrier in MP3 format.  
Note  
The index RIPPING FOLDER with the sub folder 000 will be applied to  
the storage medium for the MP3 data.  
Note:  
When transfering audio data to a data carrier be aware of the existing  
copyright laws and regulations!  
For each further copying process a sub folder 001, 002 and so forth,  
will be applied.  
Make sure that you are producing copies for private use only and do  
not violate applicable laws!  
1. Plug a USB memory stick into the USB port and/or a memory card into  
the corresponding memory card slot.  
The amount of space available on the data carrier will be displayed next to  
the input Memory available.  
2. Place an audio CD into the disc tray.  
After the disc has been read the playback window illustrated above will  
appear.  
3. Select with the control buttons  
with the OK button.  
4. Now select with the control buttons  
confirm with the OK button.  
the input Ripping and confirm  
the input Ripping target and  
A selection window appears showing the target storage medium available  
for the ripping.  
5. Select the storage medium (USB, SD/MMC, CF), on which you want to  
save the MP3 data and confirm with the OK button.  
Select with the control buttons  
a title from the title list and con-  
firm with the OK button. The title will be marked with a tick. In the same way  
you select further titles for copying in MP3 format.  
To mark all titles for copying in MP3 format, select with the control buttons  
the input Select all and confirm with the OK button. All titles will  
be marked with ticks.  
The resulting total size of the title on the data carrier, itself dependent on the  
quality of the MP3 after copying, appears next to the input Size of selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 23 -  
15. Cleaning of the DVD player  
17. Troubleshooting  
Clean the housing of the DVD player with a slightly damp cloth and a mild  
cleanser only. When cleaning, make sure that no moisture gets into the DVD  
player!  
Display is blank/DVD player shows no functions even though it is  
switched on  
Clean the inside of the disc tray, if necessary, exclusively with a clean dry  
brush (i.e. a lens brush obtainable from a photographic dealer). Never clean  
the inside of the disc tray with anything moist!  
A
Check to see that the power cord is properly plugged into the power  
socket.  
B
Check to make sure that there is power at the power socket, in which  
you have plugged the DVD players power cord, by connecting another  
appliance to the socket. If necessary plug the DVD players power cord  
into another power socket.  
Check to make sure that the display is not switched off by the Dimmer  
function. To do this press the DIMMER button on the remote control.  
Switch off the DVD player by pressing the POWER button and wait ten se-  
conds. Then switch the DVD player back on by pressing the POWER but-  
ton.  
Warning!  
Moisture penetrating into the DVD player creates the risk of an electric  
shock! The DVD player may also be irreparably damaged!  
C
D
16. Disposal  
Disposing of the appliance  
The display shows "No Disc" even though there is a disc inserted  
Do not, under any circumstances, discard the appliance in the house-  
hold refuse.  
A
The disc is dirty, scratched or damaged. Clean the disc or insert another  
disc.  
This appliance is subject to the European Guidelines 2002/96/EG.  
B
The Country/Region code on the inserted DVD/VCD/S-VCD does not  
correspond to the Country/Region code of the DVD player. In this case  
the DVD/VCD/S-VCD cannot be played with the DVD player.  
Dispose of the appliance through an approved disposal centre or at your  
community waste facility.  
Observe the currently applicable regulations. In case of doubt, please  
contact your waste disposal centre.  
Inserted disc will not playback  
It is possible that a layer of condensation has built up on the DVD players  
laser scan lens. This can be the case especially if the DVD player has been  
subjected to strong temperature fluctuations.  
Disposing of batteries!  
Do not dispose of the batteries with household waste. Every consumer is legally  
obliged to dispose of batteries at a collection site of his community/city district  
or at a retail store.  
This obligation is intended to ensure that batteries are disposed of in an en-  
vironmentally safe fashion.  
If this is the case place the DVD player in a dry environment at normal room  
temperature. First remove the currently inserted disc from the disc tray. Then  
leave the DVD player switched off for at least one hour without using until the  
condensation film has evaporated.  
Only dispose of batteries when they are fully discharged.  
No image or Black/White image only  
A
Check to make sure that all connection cables between the DVD player  
and the television (or Video projector) are firmly inserted into the corres-  
ponding sockets  
Disposal of packaging  
Dispose of the packaging materials in an environmentally responsible  
manner.  
B
Check to make sure that the settings in the OSD menu match the connec-  
tions variant, with which you have connected the DVD player to the tele-  
vision (or Video projector).  
For this see chapter 8. "Connecting the DVD player to a television“.  
C
Check by means of the televisions (or Video projectors) operating in-  
structions to see if settings to the television (or Video projector) may be  
necessary in order to use the DVD player with the television.  
No sound  
A
Check to see if the television and/or the DVD player has been switched  
to mute.  
B
Check to see that all connecting cables between the DVD player and  
potentially connected audio components are firmly plugged into the  
corresponding sockets  
C
Check to make sure that the settings in the OSD menu match the connec-  
tions variant, with which you have connected the audio component to  
the DVD player.  
For this see chapter 9. "Connecting an audio component to the  
DVD player“.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 24 -  
D
E
Check by means of the televisions operating instructions to see if settings 18. Glossary / Key Word Index  
to the television may be necessary in order to use the DVD player with  
the television.  
Check by means of the operating instructions for a potential connected  
audio component if settings to it are necessary in order to use it with the  
DVD player.  
What are DVDs, VCDs and S-VCDs?  
DVDs  
F
If you …  
DVD is the short form for "Digital Versatile Disc". DVDs are a storage medium  
for audio and video data; they are available in 8 cm and 12 cm (Diameter)  
formats. Because of the much higher storage capacity as compared to CD-Rs/  
CD-RWs DVDs can provide a playback duration of up to eight hours for the  
audio and video data stored on them.  
have connected the DVD player to a stereo television and have not  
connected an audio component to the DVD player or  
have connected a Dolby Prologic compatible audio component via the  
analogue stereo outlet (via cinch cables to the cinch sockets L and R)  
of the DVD player:  
Check to see if you have selected the option "Large" in the OSD menu  
under sub menu item Front LS.  
VCDs/S-VCDs  
"Video CD" (VCD) and "Super Video CD" (S-VCD) are designations for two  
processes of compressed storage, thus space saving, of films on CDs. VCDs  
and S-VCDs are available in 8 cm and 12 cm (Diameter) formats. Their storage  
capacity is a great deal lower than that of DVDs. For this reason they only  
offer a playback duration, for the saved audio and video data on them, of  
20 minutes (8 cm format) and/or 74 minutes (12 cm format).  
VCDs are available in two versions:  
No 4:3 or 16:9 image  
A
Check by means of the televisions operating instructions, which image  
formats the television has at its disposal.  
Check to see if the settings in the OSD menu match the available image  
format of the television.  
B
Only audio and video data can be played back on version 1.1  
VCDs/S-VCDs.  
Remote control not functioning  
A
B
C
Check to make sure that the remote control batteries have been inserted  
into the battery compartment with the correct polarity.  
Check to see if the remote control batteries are exhausted and, if necessary,  
change both batteries.  
Make sure that there are no obstacles located between the remote  
control and the DVD player.  
PBC (Playback control) functions are available on version 2.0 VCDs/  
S-VCDs. In addition still images can be played back in a higher resolution.  
Playback Control (PBC)  
Version 2.0 VCDs/S-VCDs have Playback Control (in short "PBC") at their dis-  
posal. Then on the VCD/S-VCD a main menu is available, by which various  
functions of the VCD/S-VCD are allowed to be operated.  
D
Be situated no more than five meters from the DVD player when using  
the remote control.  
What are Title and Chapter?  
Playback language/ Subtitle language do not correspond to the  
settings in the OSD menu  
The playback language/Subtitle language setting in the OSD menu is not  
Title is the name given to the largest units of image and sound units on DVDs;  
on many DVDs the (Main) film has the title number 01. For bonus material  
(i.e. Film trailer, background information etc.), that is available on many  
DVDs, other possible title numbers can be used.  
available on the inserted disc.  
One or several functions can not be switched on  
The selected function may not be available on all DVDs/VCDs/S-VCDs!  
If you attempt to execute a function that is not available, the symbol  
displayed on the television screen.  
Chapter is the name given to the next smaller image and sound units beneath  
title. If the title or titles on a DVD/VCD/S-VCD are subdivided into chapters,  
they are assigned numbers that can be entered to select the chapters directly.  
is  
Bear in mind that not on all DVDs …  
None of the buttons on the appliance or on the remote control are  
functioning/other malfunctions  
are the DVD or the title divided into (numbered) chapters  
Chapters are also designated as "Scenes" (i.e. in the main menu of  
DVDs)  
A
Switch off the DVD player by pressing the POWER button. Wait ten  
seconds, then press the "Power" button again once to switch the DVD  
player back on.  
What are Scart, S-Video, Composite-Video Progressive  
Scan, YUV and HDMI?  
B
If the malfunction is still present: Reset the DVD player to its default  
settings.  
Scart  
For this see chapter 10.6. "Misc settings".  
Scart denotes a 21 pole standardized plug connection, via which the RGB  
signal, video signal and S-Video signal as well as a number of control and  
auxiliary signals are transmitted.  
Contact one of our service partners in your area if …  
the stated function defect can not be resolved as described or  
other functional defects arise.  
S-video  
For this see chapter 19. "Warranty and service".  
When the DVD player is connected to a television via S-Video the brightness  
and colour signals are transmitted seperately; in this way a greater image  
sharpness and a reduced so called "Colour noise" is achieved.  
Colour noise refers to the overlaying of the colours, mostly heavily saturated  
parts of a video image, through an irregular, restive breakdown structure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 25 -  
Composite video  
Video signal or FBAS signal; thereby it involves an image signal, in which  
colour and brightness information are included at the same time.  
the stereo loudspeakers. The deepest sounds are fed to a bass loudspeaker,  
the so called "Subwoofer". The subwoofer can be placed in any desired loca-  
tion in the room; the logic for this is that the bass sounds that the subwoofer  
puts out can scarcely be localized exactely by the human ear  
Progressive scan  
In the normal way TV appliances and Video projectors are controlled with so  
called "Half images". Thereby clearly visible line structures develop. Contrary  
to this, Progressive Scan denotes the output of full images (with this DVD player,  
at the output YPbPr) Progressive Scan signals can only be processed by play-  
back appliances equipped for this purpose (in particular large screen tele-  
visions and projectors). The image quality as opposed to traditional image  
signals is considerably higher.  
Dolby Digital (5.1)  
Dolby Digital, also designated as AC3, is a digital sound format, by which up  
to six seperate audio channels can be transported. With most of the current  
DVDs, the sound is stored in the so called "Dolby Digital 5.1" format; the "5"  
in the name "5.1" stands for the three front and two rear surround sound  
channels, the "1" stands for the subwoofer channel.  
YUV (component video out)  
DTS  
YUV indicates the component signal, which with this appliance is available  
at the output YPbPr in the form of so called "Half images"; as a rule this is the  
best signal for the control of large screen televisions and projectors, which  
can not process Progressive Scan signals. As with the RGB image transmis-  
sion, YUV is comprised of three separated image signals:  
DTS is the abbreviation for "Digital Theatre System" and denotes one of the  
most common surround sound formats for DVDs. As with Dolby Digital 5.1,  
DTS uses three front and two rear surround sound channels as well as a bass  
sound channel.  
the brightness signal "Y" and  
the two colour difference signals "Pb/Cb" and "Pr/Cr"  
What are PAL, NTSC and SECAM?  
PAL  
Half images (Interlace)/Full images (Progressive Scan)  
PAL is the abbreviation for "Phase Alternation Line". PAL is the mid and west  
Europe (Exception: France, see the heading "SECAM") customary and most  
wide spread colour television standard.  
A standard television image is comprised of 576 visible lines; at first all odd  
and then all even image lines are displayed alternatively, thus each displays  
a half image. Thereby only 25 full images (50 Half images) can be displayed  
per second. This technique is designated as "Interlace" format.  
NTSC  
NTSC is the abbreviation for "National Television System Committee". NTSC  
Contrary to this with the so called progressive or "Progressive Scan" format  
all image lines are displayed every time, that is to say 60 full images per  
second are displayed. Thereby increasing the total quality of the images, still  
images and text for example appear sharper.  
is a colour television standard that is primarily used in the USA and Japan.  
SECAM  
SECAM is the abbreviation for the french "système en couleur avec mémoire".  
SECAM is the customary colour television norm in France and many east  
European countries and at present still the most widely spread system in  
those countries.  
HDMI  
HDMI is short for "High Definition Multimedia Interface" and refers to a 19  
contact interface for complete digital transmission of audio and video data.  
With its high bandwidth HDMI handles all known today home electronics  
digital video and audio formats. HDMI transmits audio data up to frequencys  
of 192 kHz with text widths of up to 24 Bit on up to 8 channels. Thus not  
only all of today's image and sound formats introduced into home electronics  
including HDTV (up to the highest present resolution of 1080i) are transmitted  
without loss of quality but also future formats with yet higher resolutions.  
Audio CDs  
Audio CDs contain exclusively audio data; they are also available in 8 cm  
and 12 cm (Diameter) formats. The playback duration for the audio data  
stored on them amounts to 20 minutes (8 cm format) and/or 74 minutes  
(12 cm format). Audio data is stored on audio CDs in CDA format.  
MP3  
Decoder  
MP3 denotes a process and/or format developed by the Fraunhofer Institute  
for the compression of audio data. In the MP3 format compressed music pieces  
are only a fraction of their original size, which, for example, on CD-Rs/CD-RWs  
allows for storage of a considerably greater volume of music than on com-  
mercially available audio CDs, on which audio data is stored in the CDA  
format.  
The sound on DVDs with home theatre sound is saved on the DVD in encryp-  
ted (encoded) form. Different encryption formats exist for several purposes,  
for example AC-3 for the playback of Dolby Digital Surround Sound.  
In order to playback encrypted sound, the playback appliance (i.e. the DVD  
player) and/or the audio component connected to it (for example Surround  
system) must be equipped with a so called decoder, which converts the en-  
crypted signal back into music and/or sound.  
WMA  
The Silvercrest KH 6517/KH 6518 DVD player is equiped with an AC-3  
Decoder (for Dolby Digital 5.1 Surround Sound signals).  
WMA ("Windows® Media Audio") is a data format developed by Microsoft®  
for audio data.  
Dolby Surround  
JPEG  
Dolby Surround is an analogue sound format, by which the two channels  
of a stereo sound signal are used in order to accommodate room sound in-  
formation for further channels. Dolby Surround decoders convert the signals  
back into sound or music and send the audio to two additional speakers that  
are situated behind the listener.  
JPEG ("Joint Photographics Expert Group") denotes a wide spread graphic  
format, developed by the organization with the same name, with which image  
data of the colour and grey scales are compressed.  
Dolby Prologic  
In comparison to Dolby Surround sound format, with Dolby Prologic an addi-  
tional channel in the stereo signal is used; this is the so called "Centre" channel.  
The corresponding centre loudspeaker is to be situated in the middle between  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 26 -  
Nero Digital  
19. Warranty & Service  
NERO is a dta compresion program, which can compress all video formats to  
less than 20% of their original size, while still maintaining a high qualiyt. CDs,  
which have been recorded with NERO, can contain chapters and sub-titles in  
two languages. The CDs are operated via the normal buttons that are used  
for DVDs. Data, which are not created with the NERO Digital "Standard Profile“,  
may not play immediately or only with restrictions.  
The warranty for this appliance is for 3 years from the date of purchase.  
Should you have grounds for complaint, despite our high quality standards,  
please contact our Service Hotline.  
In the event that your complaint cannot be resolved over the telephone, you  
will receive from them  
a processing number (RMA number) as well as  
an address, to which you can send your product for warranty processing.  
MPEG  
MPEG ("Moving Picture Experts Group") refers to a video compression for-  
mat.  
In the case of a mail-in shipment please enclose a copy of the purchase receipt  
(sales slip). The appliance must be securely packed and rhe RMA number  
clearly visible. Shipments without an RMA number can not be processed.  
USB memory sticks  
The term USB memory stick refers to a plugable USB device, which is appro-  
ximately the size of a cigarette lighter. The expression is only colloquial and  
not a designation for a type of product. For the most part with this expression  
is meant a USB device that serves as an interchangeable storage media.  
Note:  
The warranty provisions cover only material or factory defects.  
The warranty provisions do not cover  
• worn out parts  
• damage to breakable parts like switches or rechargeable batteries.  
What are files?  
As opposed to audio CDs the title on a CD-R/CD-RW with MP3-, WMA- or  
JPEG data can be stored in files, for example, in order to file titles from different  
genres.  
The structure of an MP3-CD can, for example, appear as follows, if the MP3  
data is stored in files:  
This product is for private use only and is not intended for commercial use.  
The warranty is void in the case of abusive and improper handling, use of force  
and internal tampering not carried out by our authorized service branch.  
Your statutory warranty claims are not restricted by this warranty.  
20. Importer  
MP3  
MP3-CD  
FOLDER  
KOMPERNASS GMBH  
BURGSTRASSE 21  
D-44867 BOCHUM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 27 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 28 -  
Warranty  
DVD-Player KH6517/18  
In order to guarantee a cost free repair procedure please  
get in touch with the service hotline. Make sure you have  
your sales slip handy.  
Irish Connection  
Harbour view  
Howth  
Co. Dublin  
Tel: 00353 (0) 87 99 62 077  
Fax: 00353 18398056  
Sender, please write clearly:  
Last name  
First name  
Street  
City/Town  
Country  
Telephone  
Date/Signature  
Description of fault:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Refrigerator RG1140 User Manual
InSinkErator Water Dispenser H770 User Manual
Inter Tel Telephone Axxess User Manual
Jacuzzi Hot Tub EU60 User Manual
JL Audio Speaker e1800D User Manual
JVC Camcorder GR AX670 User Manual
Kenmore Sewing Machine 385 19000 User Manual
Kenwood DVD Player DVR 605 User Manual
Keys Fitness Fitness Equipment ST DB5 User Manual
KitchenAid Oven KEWD105H User Manual