CONTENTS
1.
Before you start.........................................................................................2
2.
Important information...............................................................................5
3.
Connecting a computer to the KODAK DP1050 ULTRA........................6
4.
Connecting a video source to the KODAK DP1050 ULTRA ................10
5.
Connecting a TV-source to the KODAK DP1050 ULTRA ....................12
6.
Using the KODAK DP1050 ULTRA ........................................................14
7.
Using the menus .....................................................................................19
8.
Maintenance ............................................................................................34
9.
What do I do if (Trouble shooting).........................................................35
Pag e 1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.2 Video accessories
1.2 Accessories
◆ Super-video cable
◆ Composite video cable
◆ Audio cable
Please take a few minutes to make sure that your
KODAK DP1050 ULTRA contains all the necessary
parts:
1.2.3 Other cables/accessories
1.2.1 Computer accessories for
external PC/MAC
◆ Dual soft bag
◆ Power cable, 4m/12 ft.
◆ Remote control including batteries
(type AAA/LR03)
◆ Computer cable Enhanced Video Connector (EVC),
male at both ends, 3 m/9.8 ft.
◆ Cable for PC / MAC audio (Stereo jack, 0.3m/1 ft.)
◆ PC adapter
1.2.4 Optional cables and accessories
◆ RS-232 mouse cable for PC
◆ PS/2 mouse cable for PC
◆ EVC cable, 10-15m
◆ Ceiling mount kit
◆ MAC adapter
◆ Apple Desktop Bus (ADB) mouse cable for MAC
Con t en t s
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Softbag
Batteries
Z O O M
V
S - V
F O C U S
T V
C H A N
P C
Interactive
Remote
Control
EVC cable
PC adapter
Cable organizerbag
Super-video cable
Composite video cable
Audio cable
PS/2 mouse for PC
RS232 mouse for PC
Mac adapter
Stereo jack cable
ADB mouse for Macintosh
Con t en t s
Figure 1: Product and accessories
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 Insert batteries in the remote
control
2. Important information
The warranty card or copy of invoice is your proof of
purchase. Please make sure that the warranty card is
returned in order to get the warranty service you are
entitled to.
Failure to return the warranty card may void your
warranty.
Figure 2 shows the remote control with the battery
lid removed. Slide off the battery lid and insert the
batteries with the + and - poles correct. Slide the
battery lid back on again.
NOTE!
Please use caution when transporting the unit.
WARNING!
Tampering with or opening the
KODAK DP1050 ULTRA can be dangerous.
Leave maintenance to authorized KODAK
service personnel. Please contact your local
dealer with any service or maintenance
questions you may have.
Figure 2: Inserting batteries in remote control
Con t en t s
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connecting a computer to the KODAK DP1050 ULTRA
5. If you want to use the remote control to control your
The procedure for connecting a
computer to the KODAK DP1050
ULTRA is the same for all types
of computers.
computer, connect the correct mouse cable from
the computer to the adapter box. See figures 7 and
8. When your computer is connected to the KODAK
DP1050 ULTRA with the EVC cable (with EVC con-
nector on the computer), the remote mouse control
will automatically function as a regular mouse on
your PC or MAC.
1. Make sure the computer, monitor and KODAK
DP1050 ULTRA are switched off.
6. If you want to use sound with your computer,
connect the stereo jack cable to the computer audio
connection and to the PC or MAC adapter box.
2. Identify the RGB out connector on the back of your
computer (where you connect a monitor to the
computer).
7. Turn on the KODAK DP1050 ULTRA and then
the computer. The computer image should now be
projected from the KODAK DP1050 ULTRA and the
remote control should now work as a regular
mouse. If the computer’s image is not displayed
simultaneously on the monitor, or the mouse is not
working, see the section ‘What do I do if’.
3. Connect the computer to the KODAK DP1050
ULTRA using the EVC cable and the adapter for
the computer you are using. See figures 3 and 4.
4. If you have a desktop computer and want to display
the image on your computer monitor, connect the
cable from your monitor to the adapter.
See figure 5 and 6.
Con t en t s
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a laptop, notebook
Connecting to an Apple PowerBook
Back panel of
computer
Back panel of
computer
MAC adapter
PC adapter
EVC cable
EVC cable
Figure 3: Connecting to a laptop, notebook
Figure 4: Connecting to an Apple PowerBook
Con t en t s
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a desktop PC
with standard RGB
Connecting to an Apple Macintosh
desktop computer
Back panel of
computer
Back panel of
computer
MAC adapter
PC monitor
PC adapter
PC monitor
EVC cable
EVC cable
Figure 5: Connecting to a desktop PC
with standard RGB
Figure 6: Connecting to an Apple Macintosh
desktop computer
Con t en t s
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the mouse cable
and stereo jack (PC)
Connecting the mouse cable and
stereo jack (MAC)
Back panel of
computer
Back panel of
computer
MAC adapter
PC monitor
PC adapter
PC monitor
EVC cable
EVC cable
Figure 7: Connecting the mouse cable and
stereo jack (PC)
Figure 8: Connecting the mouse cable and
stereo jack (MAC)
Con t en t s
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connecting a video source to the KODAK DP1050 ULTRA
4. When all the connections are done and verified,
The procedure for connecting a video
source to the KODAK DP1050 ULTRA
is the same for S-video and Composite
video
switch on the video source and the KODAK
DP1050 ULTRA.
5. The KODAK DP1050 ULTRA will now automatically
display the pictures from the video source. If not,
see the section ‘What do I do if’.
SECAM, PAL N and PAL M modes are manually
selected by pressing “Green Button“. If the right format
is not found first time, press again. The video format is
stored separately for each connector.
1. Make sure that the video source and the
KODAK DP1050 ULTRA are switched off.
2. Connect the video cable from the Video out connector
of the video source to the correct video connector on
the KODAK DP1050 ULTRA plug panel.
Figure 9: Connecting to video sources
3. Connect the audio cable from the Audio out
connectors of the video source to the Audio in
connectors on the KODAK DP1050 ULTRA.
Connect the red plug to the red connector, and the
other plug to the white connector. Red is the right
stereo channel.
Con t en t s
10
Download from Www.Somanuals.com. All Manuals Search And Download.
When external speakers are connected, these can be
turned on or off from the KODAK DP1050 ULTRA. To
control the internal speakers, see section on Adjust
audio settings, section 7.3.3.
4.1 Using external speakers
In order to use external speakers with the KODAK
DP1050 ULTRA you need an amplifier. Connect the
amplifier to the audio out on the KODAK DP1050
ULTRA.
Figure 10: Using external speakers
Con t en t s
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The KODAK DP1050 ULTRA behaves just like a
normal TV. See the menus section 7.2.6 on how to
adjust the TV settings.
5. Connecting a TV- source to the
KODAK DP1050 ULTRA
There are basically three ways of receiving the TV
signals to the KODAK DP1050 ULTRA:
A TV-tuner is optional for the
KODAK DP1050 ULTRA
◆ Antenna (Terrestrial)
◆ Cable
◆ Set-up box for satellite
These three work differently and it is important to
consider the options of each when adjusting the
KODAK DP1050 ULTRA settings.
Antenna
When you adjust your TV to signals from an antenna
you must store each channel in a different program. .
The same is true for the KODAK DP1050 ULTRA TV-
tuner. When connected to an antenna you assign the
different channels to the programs in the Television
Setup Menu. Then you use the Up and Down arrows
in the menu, remote control or the channel up/down
button on the control panel to switch between channels.
Figure 11: Connecting to TV- source
NOTE! Requires TV tuner to be installed.
In order to use the KODAK DP1050 ULTRA as a TV
output; connect the TV antenna to the TV connector on
the KODAK DP1050 ULTRA plug panel.
Con t en t s
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable
Satellite
When you are connected to a cable system you have
two options. If you have a cable decoder you set your
TV to the channel for the cable, and then you use the
remote control for the decoder to switch between
channels. If you do not have a decoder you simply set
your TV up just like you would with an antenna. This is
also the same with the KODAK DP1050 ULTRA. You
must scroll the channel name in the TV Setup menu
until you find the correct channel for your cable system.
When this channel has been assigned to one of the
program numbers you simply select this program and
use the remote control or control panel to switch
between channels.
This works like the cable decoder meaning that you
select the channel that reads the signals from the
satellite dish. Then you use the remote control of the
decoder to switch between channels.
Con t en t s
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand-by mode
In stand-by mode the projector is turned off and can be
turned on by using defined keys, see section 6.3
6. Using the KODAK DP1050 ULTRA
Normal mode
In normal mode a picture will be shown on the screen.
The mouse will function as a normal PC/MAC mouse.
6.1 Different program modes for the
KODAK DP1050 ULTRA
Quick mode
KODAK DP1050 ULTRA has different modes
of operation:
Quick mode is used with the interactive remote control
(quick key). You assign functionality for the quick key
on the remote control in the quick menu (see section
7.2.5). When clicking on the Quick key you will be able
to switch between all the functions you have selected in
this menu.
◆ Stand-by mode
◆ Normal mode
◆ Quick mode
◆ Menu mode
◆ Pointer mode
◆ Blank mode
Menu mode
In menu mode the menu system is activated and you
use the mouse pad and the mouse buttons on the
remote control to navigate in the menu.
Pointer mode
In pointer mode you can move a pointer cursor on the
screen by using the mouse function.
Blank mode
In blank mode the screen is blanked out (black).
Con t en t s
14
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 KODAK Remote control
The KODAK Remote control has two purposes:
1. To access the Main Menu and control the various
image adjustments and utility functions of the
KODAK DP1050 ULTRA
2. To allow remote control of your computer
Pointing it towards the projection screen operates the
remote control. An infra red beam bounces from the
screen to an infrared receiver on the KODAK DP1050
ULTRA.
Figure 12: Kodak remote control
NOTE!
Make sure nothing is blocking the IR receiver in
front of projector located beside the lens, as this
will prevent the communication between the remote
control and the KODAK DP1050 ULTRA.
The remote control works with Macintosh and with
Microsoft Windows, for interactive distance control of
your computer. A unique pressure-sensing pad on the
remote makes it very easy to control the computer and
to perform the exact same operations as you would
with a normal mouse.
To ensure smooth operation, the combined dis-
tance from the remote control to the screen and
back to the projector should not exceed 10 meters
(33 ft). If the distance via the screen is longer, you
should point the remote control directly towards
the IR receiver.
Con t en t s
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The Remote control is very easy to operate. It has only
six keys in addition to the pressure sensing mouse pad.
The six keys are:
Quick
When pressing the Quick key you can switch between
all selected functions for the Quick key. See section
7.2.4 for how to select functions for the Quick key.
Key underneath the control
Left mouse key
Small gray key
Interrupt/break an action (right mouse key)
Menu
The menu key gives access to the KODAK menu con-
trol functions. To move within the various menu func-
tions, position the arrow cursor by pressing the sensi-
tive mouse pad and click with the left mouse button
which is located underneath the remote control.
If you are in menu mode and press the menu key you
will return to normal mode
Figure 13: The remote mouse communicates with the
KODAK DP1050 ULTRA projector via
the projection screen
Zap
The two zap keys can be programmed to perform an
assigned function. To assign a function to the zap keys,
select the Zap icon from the menu. The zap keys can
be programmed to do the same function e.g. volume
up/down. See section 7.2.5 for further explanations of
the zap menu.
Con t en t s
16
Download from Www.Somanuals.com. All Manuals Search And Download.
The touch panel gives you direct access to the most
important functions of the KODAK DP1050 ULTRA. It is
very handy to use when the remote control has low
batteries, or you simply have forgotten to bring it with
you. The key functions are as follows:
6.3 Using the touch panel on the
KODAK DP1050 ULTRA
Source
The KODAK DP1050 ULTRA has direct keys for four
sources:
PC
Functionality
◆ Computer (PC/MAC)
◆ TV
Text/color
(PC)
CHAN
TV
V
(TV)
◆ Composite video
◆ S-video
(V)
(S-V)
The TV source button will only work when a
TV-tuner is installed.
S-V
Figure 14: The keys on the touch panel on the
KODAK DP1050 ULTRA projector
Con t en t s
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume (+/-)
Automatic set-up
The Volume key is used to control the sound level
when the KODAK DP1050 ULTRA is connected to an
audio source.
The automatic set-up key will set up the projector with
optimal settings for the connected source. If you want
to do manual adjustments you can do this by using the
menus (see section 7).
Channel
Click on the arrows left/right to switch between
pre-programmed TV channels when TV is
selected as source.
Note!
You can not access the screen menu
system without the remote control.
Brightness
The Brightness key is used to control the brightness in
data and video image.
6.4 Adjusting the height and angle of
the KODAK DP1050 ULTRA
Contrast
You can adjust the height and angle of the KODAK
DP1050 ULTRA by adjusting the four small feet under-
neath the product.
The Contrast key is used to control the contrast in data
and video image.
Stand by
NOTE!
The stand by key will set the KODAK DP1050 ULTRA
in stand by mode. The lamp will turn off, and the fans
will run for a little while cooling the projector before
stopping. To return to normal mode, press the Stand by
key once more, or press the Menu key on the remote
control.
The KODAK DP1050 ULTRA should never be left
with an angle of more than 15 degrees over a
longer period of time. This will shorten the
lifetime of the lamp.
Con t en t s
18
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5 Adjusting Focus / Zoom
7. Using the menus
To adjust focus, turn the outer part of the lens (1).
To adjust zoom, turn the inner part of the lens (2).
7.1 The menu system
T V
P C
1
2
Main Menu
Menu with TV tuner option installed.
Con t en t s
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand by
7.1.1 Main menu
The main menu is divided into two parts:
◆ Icons
◆ Help text
This function sets the projector in
stand-by mode
Icons
The icons illustrate a function and are grouped into
groups with similar functionality. Clicking an icon acti-
vates it. Some icons have a direct function and some
will activate a second level menu.
Auto set-up
Help text
By moving the cursor over the icons the text area will
give a short description of the icon.
Auto set-up will do automatic set-up of the projector:
◆ Horizontal and vertical position
◆ Sampling clock
◆ Phase
◆ Chooses between available video formats and
NTSC/PAL auto detection
Con t en t s
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Source
Control panel
You can connect four different sources to the KODAK
DP1050 ULTRA; one computer source, two video
sources and one TV tuner (optional).
In this menu you can make adjustments for picture and
sound.
You select the source you want to use by clicking on
the icon representing the source. Use the pressure-
sensing pad on the remote mouse to move the mouse
pointer to an icon and click the button (left mouse)
underneath the remote mouse.
Removing the main menu
To remove the menu system, press the MENU key on
the Interactive Remote control. You can also remove
the menu by clicking the right mouse button (on the top
of the remote control). The right mouse button will also
function as cancel when in the menus.
Set-up menu
The menu will disappear on its own in 40 seconds.
In this menu you set up the projector with settings that
will not be changed often, e.g. language, mouse sys-
tem or picture orientation.
Con t en t s
21
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Set-up menu
7.2.1 Picture orientation
Set-up menu
In the set-up menu the following
sub-menus are available:
◆ Picture orientation
◆ Language
Picture orientation
◆ Mouse system
The picture orientation menu is used for rotating and
mirroring the picture.
◆ Quick key assignment
◆ ZAP keys assignment
◆ Lamp hours
Normal
Normal is used when the projector is standing on a
table projecting a picture on a screen.
Mirror
Mirror is used when the projector is projecting the
picture from the back of the screen
Con t en t s
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotate
7.2.2 Mouse system
Rotate is used when the projector is ceiling mounted
and projecting image from the front.
Rotate and mirror
Rotate and mirror is used when the projector is ceiling
mounted and projects the picture from the back of the
screen.
Mouse system selection
USB and mouse for MAC will be selected automatically
when the mouse cable is connected. If your PC uses
RS232 mouse, you must choose MS Serial Mouse in
this menu. If your PC uses PS/2 mouse, you must
choose PS/2 in the menu. Selected system will be
active until another system is chosen. When shipped
the KODAK DP1050 ULTRA is set up to PS/2.
Con t en t s
23
Download from Www.Somanuals.com. All Manuals Search And Download.
This menu allows you to choose between six different
menu languages: English, French, German, Italian,
Spanish and Norwegian.
7.2.3 Language
Click in the box next to the language you want to use.
Click on the OK button. The window will disappear, and
the selected language will be used in the main menu
and in all other menus.
Language selection
Con t en t s
24
Download from Www.Somanuals.com. All Manuals Search And Download.
In the quick menu you can assign functionality for the
quick key on the remote control. When clicking on the
quick key you will be able to switch between all the
functions you have selected in this menu. In this
example, the first time you click on the quick key you
will activate the volume function. A volume bar will be
displayed at the bottom of the projected image where
you can adjust the volume up and down. You adjust the
bar by either pressing the pressure-sensing pad right
or left or you may use one of the two zap keys on the
remote control. To accept the adjustment, and terminate
the quick menues click on the left mouse button.
To get back to the original volume, click on the right
mouse button.
7.2.4 Quick menu
Quick menu settings
The next click on the quick key will accept the volume
adjustment and activate the brightness function and a
brightness bar will be shown at the bottom of the page.
When you have gone through all assigned functions
the menu will disappear.
Con t en t s
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume (+/-)
Controls the sound of active source.
7.2.5 Zap menu
TV channel
Controls the pre programmed TV channel assignments.
If a TV tuner is installed and selected as source you
can select TV channel by using the zap keys.
Pointer
You can activate the pointer function in the projector.
One click activates the pointer and the next click
deactivates it.
Blank
Activates blank mode by pressing the Zap key. First click
will activate Blank mode and second click will deactivate it.
Mute
Turns the sound off. First click will turn off the sound
and second click will turn it on.
Zap menu
Computer
Selects Computer as source.
The Zap menu is used to assign functions to the zap
keys on the remote control.
Video
Selects video sources. Both Zap keys can be
programmed to select Video (video input 1 or 2).
The menu consists of two columns of buttons where
the left column assigns the functions to the Zap 1 key
and the right column assigns the functions to the
Zap 2 key.
Tuner
Select TV-tuner as source.
Con t en t s
26
Download from Www.Somanuals.com. All Manuals Search And Download.
The TV setup menu is divided in two parts:
7.2.6 Television programs
◆ Automatic TV station
◆ Program
Automatic TV station search
This function selects all TV stations with a signal (maximum
60 stations). These will be symbolized with a TV icon.
This menu is only displayed if the TV tuner is installed
and TV tuner is selected as source. The television
program menu is then activated by pressing the
”television program” icon
Con t en t s
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming new channels
When assigning a Channel to a Program:
1. Select a channel in the automatic search menu by
clicking on the TV icon symbolizing the wanted TV
station.
2. The TV channel will be activated, and the icon will be
highlighted
3. Select the program you want to place this channel on
4. TV icon will appear on this program choice. The high-
lighting will disappear, and the TV icon will turn green
to indicate that the channel has been assigned to a
program.
To search for channels manually, use the arrow keys at
the bottom right. The channel may be assigned to a pro-
gram by just selecting an unused program choice.
There are 30 channels that can be preprogrammed.
By selecting the Search button the system will scan
through all available TV channels. A TV icon will
symbolize all channels found.
When deleting a Program:
1. Select an empty channel in the automatic search
menu by clicking on a square without any TV icon.
The square will be highlighted.
2. Select the program you want to delete
3. TV icon will be removed from this program choice.
Con t en t s
28
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2.7 Show accumulated lamp time
7.3 Control panel menu
Control panel menu
Show accumulated lamp time
In the control panel you have access to menus for
adjusting picture and audio settings.
In this window you can see the accumulated time that
the lamp have been used. You also use this window to
reset the accumulated lamp time when you have
changed lamp.
The icons ”Picture positioning” and
”Synchronization Adjustments” are only
visible if PC source is active.
Con t en t s
29
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3.1 Picture control
Select the picture control menu for adjusting brightness,
saturation and tint.
When PC is selected as source, only brightness and
contrast will be available.
When PC is selected as source and auto contrast is
marked, only brightness will be available.
Con t en t s
30
Download from Www.Somanuals.com. All Manuals Search And Download.
When PAL/SECAM video is selected brightness,
contrast and saturation will be available.
All options will be available for NTSC video.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
Selecting Default restores factory settings.
Con t en t s
31
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3.2 Picture positioning
7.3.3 Audio control
Audio control
Select this function when you have connected an audio
signal to the ‘Audio in’ on the KODAK DP1050 ULTRA
connectors (or through the EVC cable). Use the four
sliders to adjust volume, bass, treble and balance until
you have a satisfying sound.
Picture positioning
Adjust vertical and horizontal position of the picture on
the screen with the two sliders.
Select Internal Mute to mute the internal speakers.
Select External Mute to mute the external audio output.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
Selecting Default restores factory settings.
Con t en t s
32
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3.4 Synchronization Adjustments
7.3.5 Color manager
Synchronization Adjustments
It is possible to adjust the synchronization in Computer
mode by adjusting the Phase and the Frequency. The
synchronization will be set by the automatic set-up
function. Manual sync adjustments should typically not
be required.
Color tone settings
The color manager is designed to give you maximum
performance from your KODAK DP1050 ULTRA projec-
tor, independent of ambient light conditions.
In the color manager menu you can choose between
four pre-defined Color settings.
Con t en t s
33
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 Product information
8. Maintenance
All maintenance should be done by
KODAK authorized service personnel.
Contact your KODAK dealer for
maintenance.
Product information
Click on the product information icon in order to get
information about the product and company.
Select Exit to leave the menu.
Con t en t s
34
Download from Www.Somanuals.com. All Manuals Search And Download.
7. The KODAK DP1050 ULTRA is not connected to
electricity. Check that the power cable is connected
to the KODAK DP1050 ULTRA and the wall outlet.
9. What do I do if (Trouble shooting)
No image appears on the screen
Possible causes and remedies:
No source signal is detected
(the ”Kodak W e l c o m e S c r e e n ” appears)
1. The KODAK DP1050 ULTRA is left in Standby
mode. If the product is in standby mode, there will
be a red light next to the stand-by button. Press the
stand-by button or the Menu key on the remote
cotrol.
Possible causes and remedies:
1. The computer has not been switched on. Turn on
the computer.
2. The cables are not properly connected. Check all
2. The lamp does not function. Check the light on the
control panel. If the light is orange, the lamp does
not function. Contact your Kodak dealer.
cable connections.
3. For Notebooks: The external RGB port may need
to be manually activated. Please consult the
notebook-operating manual for how to operate.
3. The product is set in ‘blank mode’. Press the zap
keys on the remote control.
4. The brightness is turned on too low. Adjust bright-
ness until a satisfactory image is achieved.
5. The power save or screen save on the PC is
turned on. Turn off the power save and screen
save on the PC.
6. The image is displayed on the laptop screen and
not the projector. Activate the external port on the
laptop by pressing the required key combination on
your computer.
Con t en t s
35
Download from Www.Somanuals.com. All Manuals Search And Download.
The image is not good (noise)
Possible causes and remedies:
No Image Appears
Possible causes and remedies:
1. The automatic image set-up is not activated. Run
auto set-up by pressing the green button on the
touch panel or run auto set-up from the menu.
1. The KODAK DP1050 ULTRA has not been
switched on. Check the ON/OFF switch at the back.
2. There is no electricity in the power outlet in the
wall. Check that there is power in the power outlet.
NOTE! When all connections to electricity are OK,
there will be a green light at the control panel.
2. The synchronization on the PC is not set optimally.
There is poor response from the Interactive
Remote Control
Possible causes and remedies:
1. Check that nothing is blocking the IR receiver at the
front of the KODAK DP1050 ULTRA.
2. Make sure the remote is pointed towards the
screen.
3. Make sure there is no more than 10m/33ft in
distance to the projector.
4. Batteries might be low. Change batteries in the
remote control.
5. Electromagnetic or optic noise may influence the
remote control.
Turn off sharp fluorescent tubes, mobile phones etc
that are near the projector.
Con t en t s
36
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
BEFORE YOU START ................................................................2
• 1.1 Color coding for ease of use.........................................2
• 1.2 Accessories.....................................................................3
•
•
•
•
1.2.1 Computer accessories for external PC/MAC.....3
1.2.2 Video accessories................................................3
1.2.3 Other cables/accessories....................................3
1.2.4 Optional cables and accessories .......................3
• 1.3 Insert batteries in the remote control...........................5
Con t en t s
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING A VIDEO SOURCE TO THE
4.
KODAK DP1050 ULTRA .........................................................10
• 4.1 Using external speakers...............................................11
Con t en t s
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
USING THE KODAK DP1050 ULTRA .....................................14
• 6.1 Different program modes for the
KODAK DP1050 ULTRA................................................14
• 6.2 KODAK Remote control................................................15
• 6.3 Using the touch panel on the
KODAK DP1050 ULTRA................................................17
• 6.4 Adjusting the height and angle of the
KODAK DP1050 ULTRA................................................18
• 6.5 Adjusting Focus / Zoom...............................................19
Con t en t s
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
USING THE MENUS.................................................................19
• 7.1 The Menu System .........................................................19
•
7.1.1 Main menu...........................................................20
• 7.2 Set-up Menu ..................................................................22
•
•
•
•
•
•
•
7.2.1 Picture orientation .............................................22
7.2.2 Mouse system ....................................................23
7.2.3 Language ............................................................24
7.2.4 Quick menu.........................................................25
7.2.5 Zap menu ............................................................26
7.2.6 Television programs ..........................................27
7.2.7 Show accumulated lamp time ..........................29
• 7.3 Control Panel Menu ......................................................29
•
•
•
•
•
7.3.1 Picture control....................................................30
7.3.2 Picture positioning.............................................32
7.3.3 Audio control......................................................32
7.3.4 Synchronization Adjustments...........................33
7.3.5 Color manager....................................................33
• 7.4 Product information .....................................................34
Con t en t s
Download from Www.Somanuals.com. All Manuals Search And Download.
|