December 2002 • E-24
TECHNICAL DATA / COLOR FILM
KODAK VERICOLOR Slide Film
STORAGE AND HANDLING
High temperatures or high humidities may produce
undesirable changes in VERICOLOR Slide Film. Store
unexposed film at 13°C (55°F) or lower in the original
sealed package. To prevent condensation on film that has
been refrigerated, allow the film to warm up to room
temperature before you open the package.
—NOTICE—
These films are discontinued.
KODAK VERICOLOR SLIDE FILM / 5072
(Rolls)
Use the film as soon as possible after purchase, and before
the expiration date. For consistent results, use the same
handling procedures between exposure and processing.
Keep exposed film cool and dry, and process it as soon as
possible after exposure. If processing must be delayed, you
can minimize changes in the latent image of KODAK
VERICOLOR Slide Film by storing it in a moistureproof
container and freezing it before processing. Allow the film to
warm up to room temperature before you process it.
Store processed film at 21°C (70°F) or lower at a relative
humidity below 50 percent. For information on long-term
storage, see KODAK Publication No. E-30, Storage and
Care of KODAK Films and Papers—Before and After
Processing.
KODAK VERICOLOR Slide Film is intended for producing
same-size positive transparencies from color negatives or for
making reduced-size transparencies from larger negatives.
You can use this film for professional and photofinishing
applications with contact-printing or copying and
duplicating equipment. You can also use this film to copy
black-and-white line art to make reverse-text slides or crop
negatives to make tighter composition on transparencies.
This film is coated on an acetate base, and is available in
35 mm x 100-foot rolls (5072 Film) and 135-36 rolls
(SO-279 Film). You can mount it in standard 2 x 2-inch slide
mounts or use it uncut as film strips.
Process KODAK VERICOLOR Slide Film in KODAK
FLEXICOLOR Chemicals for Process C-41.
Note: When you use KODAK VERICOLOR Slide Film for
reverse-text slides, and exact color reproduction is not
critical, you do not have to freeze the exposed film if you
process it within 7 days.
SIZE AVAILABLE
KODAK VERICOLOR Slide Film / 5072
DARKROOM RECOMMENDATIONS
Do not use a safelight. Handle unprocessed film in total
darkness.
Acetate
Base
Rolls (mm x ft)
Spec No.
CAT No.
5-mil
(0.13 mm)
35 x 100 ft, perf
VS 663
122 1217
©Eastman Kodak Company, 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: You can freeze exposed KODAK VERICOLOR Print
Film to minimize changes. If you cannot process this film
within 4 hours after exposing it, store it in a moistureproof
container and freeze it to avoid changes in the latent image.
Allow the film to warm up to room temperature before you
process it.
KODAK VERICOLOR PRINT FILM / 4111
(Sheets)
KODAK VERICOLOR Print Film is intended for producing
positive transparencies from color negatives and
internegatives for displays or photo mechanical
reproduction. This film has a dimensionally stable 7-mil
ESTAR Thick Base with a retouching surface on both sides.
DARKROOM RECOMMEDATIONS
Do not use a safelight. Handle unprocessed film in total
darkness.
SIZES AVAILABLE
KODAK VERICOLOR Print Film / 4111
EXPOSURE
ESTARThick
Equipment
Rolls (in. x ft)
Spec No.
CAT No.
Base
Use exposing equipment that has a tungten-halogen
(3200 K) light source, a heat-absorbing glass, and
untraviolet-absorbing filter (such as a KODAK WRATTEN
Gelatin Filter No. 2B or a KODAK Color Printing Filter
CP2B), and built-in dichroic filters.
40 x 100
50 x 100
122 2223
122 2249
7-mil
(0.18 mm)
351
Size
(Inches)
ESTARThick
Base
Sheets
CAT No.
Printing Color Negatives and Internegatives
KODAK VERICOLOR Print Film is intended for exposures
times of 1 to 20 seconds. Set the illumination at the exposure
plane at 2 footcandles (22 lux) without a negative or filters in
the light beam. Use an initial exposure time between 1 and
15 seconds.
To print negatives made on Kodak color films onto
VERICOLOR Print Film, use a starting filter pack of
20M + 30Y. Negatives made on daylight-balanced films
exposed with tungsten light will require more yellow
filtration. Push processed negatives may require a different
filter pack.
These filter packs are based on average emulsions of
VERICOLOR Print Film. See the film carton for
supplementary information on each emulsion. The
information lists filter and includes aperture adjustments for
times of 10 and 120 seconds. The aperture adjustment
includes the exposure adjustment required for the filters.
Use these recommendations as a guide for making trial
exposures. For best tone rendering and color balance, make
a test transparency from each type of film negative. View the
test tranparencies on a illuminator that has the same color
quality and brightness as the illuminator you will use to
display or view the finished transparencies.
Because of the variables involved in producing
internegatives from different types of transparency films,
make test to determine the best filter pack for printing
internegatives onto KODAK VERICOLOR Print Film. Start
with a filter pack that produces successful results in printing
original camera negatives and adjust filtration and exposure
as required.
10
10
50
50
10
10
4 x 5
122 1357
122 1373
122 1399
122 1415
122 1431
122 1472
8 x 10
8 x 10
7-mil
(0.18 mm)
10 x 10
11 x 14
20 x 24
STORAGE AND HANDLING
High temperatures or high humidities may produce
undesirable changes in these films. Store unexposed film at
13°C (55°F) or lower in the original sealed package. To
prevent condensation on film that has been refrigerated,
allow the film to warm up to room temperature before you
open the package.
Use the film as soon as possible after purchase, and before
the expiration date. For consistent results, use the same
handling procedures between exposure and processing.
Keep exposed film cool and dry, and process it as soon as
possible after exposure.
Store processed film at 21°C (70°F) or lower at a relative
humidity below 50 percent. For information on long-term
storage, see KODAK Publication No. E-30, Storage and
Care of KODAK Films and Papers—Before and After
Processing.
KODAK VERICOLOR Slide Film • E-24
3
Download from Www.Somanuals.com. All Manuals Search And Download.
KODAK VERICOLOR Slide Film
PROCESSING
MORE INFORMATION
Process KODAK VERICOLOR Print Film in KODAK
FLEXICOLOR Chemicals for Process C-41. Do not process
this film in washless minilab process cycles, i.e., Process
C-41B and C-41RA. This film is of an older design that
requires a stabilizing agent for image stability. Process this
film only in a processor that uses KODAK FLEXICOLOR
Stabilizer III and Replenisher.
For information on processing, see KODAK Publication
No. Z-131, Using KODAK FLEXICOLOR Chemicals at
Kodak has many publications to assist you with information
on Kodak products, equipment, and materials.
The following publications are available from Kodak
customer service, or from dealers who sell Kodak products,
or you can contact Kodak in your country for more
information.
E-30
Storage and Handling of KODAK Films and Papers—
Before and After Processing
Z-131 Using KODAK FLEXICOLOR Chemicals
Note: The Kodak materials described in this publication for
use with KODAK VERICOLOR Films are available from
dealers who supply KODAK PROFESSIONAL Products.
You can use other materials, but you may not obtain similar
results.
RETOUCHING
Use KODAK E-6 Transparency Retouching Dyes or
KODAK Liquid Retouching Colors to retouch
transparencies made on KODAK VERICOLOR Print Film.
Note: Although both types of dyes will produce a good
visual match, neither will perfectly match the image dyes of
KODAK VERICOLOR Print Film; therefore, you may
notice a slight mismatch in photomechanical reproductions
of the transparencies. Also, when retouched transparencies
are used in displays for an extended period of time, the
retouching dyes and image dyes may not change a the same
rate.
KODAK VERICOLOR Slide Film
KODAK Publication No. E-24
Kodak, Estar, Flexicolor, Vericolor, and Wratten are trademarks.
Minor Revision 12-02
Printed in U.S.A.
CAT 000 0000
Download from Www.Somanuals.com. All Manuals Search And Download.
|