DIGITAL VIDEO
DVD HOME CINEMA KIT
SD-63HK
OWNER’S MANUAL
©2003 Toshiba Corporation
2D20401A Cover
1
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SOME DOS AND DON TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety
standards but, like any electrical equipment, care must be taken if you are to obtain the
best results and safety is to be assured.
**************
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and
inter- connections between the pieces of equipment) are properly made and in accordance
with the manufacturer’s instructions. Switch off and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of
your equipment.
DO be careful with glass panels or doors on equipment
**************
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the
equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled
with liquids, such as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on,
or close to equipment. High temperatures can melt plastic and lead to fires.
DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure
complete safety always fit the manufacturer’s approved stand or legs with the fixings
provided according to the instructions.
DON’T use equipment such as personal stereos or radios so that you are distracted from
the requirements of traffic safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your
hearing.
DON’T leave equipment switched on when it is unattended unless it is specifically stated
that it is designed for unattended operation or has a stand-by mode. Switch off using the
switch on the equipment and make sure that your family know how to do this. Special
arrangements may need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working
normally, or if it is damaged in any way -switch off, withdraw the mains plug and consult
your dealer.
ABOVE ALL
—NEVER let anyone especially children push anything into holes, slots or any other
opening in the case - this could result in a fatal electrical shock;
—NEVER guess or take chances with electrical equipment of any kind
—it is better to be safe than sorry!
*************
3
2D20401A P02-07
3
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Notes on handling
Notes on moisture condensation
When shipping the unit, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed
at the factory.
Do not use volatile liquids, such as insect spray, near
the unit. Do not leave rubber or plastic products in
contact with the unit for a long time. They will leave
marks on the finish.
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
o
f
n
s
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the unit for a long period, it may not
function properly in the future. Turn on and use the
unit occasionally.
Optical pick-up
lens
Moisture condensation occurs during the following
cases:
Notes on locating
When you bring the DVD video player directly from a
cold place to a warm place.
Place the unit on a level surface. Do not use it on a
shaky or unstable surface such as a wobbling table or
inclined stand. The loaded disc may come off the
proper position and cause damage to the DVD video
player.
When you place this unit near a TV, radio, or VCR, the
playback picture may become poor and the sound
may be distorted. In this case, place the unit away
from the TV, radio, or VCR.
When you use the DVD video player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD video player in a
hot and humid place just after you move the unit from
an air conditioned room.
When you use the DVD video player in a humid
place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the unit.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Do not use the DVD video player when moisture
condensation may occur.
If you use the DVD video player in such a situation, it
may damage discs and internal parts. Remove the disc,
connect the mains lead of the DVD video player to the
wall outlet, turn on the DVD video player, and leave it for
two or three hours. After two or three hours, the DVD
video player will have warmed up and evaporated any
moisture. Keep the DVD video player connected to the
wall outlet and moisture condensation will seldom occur.
To obtain a clear picture
The unit is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating
environment. For details, contact your nearest dealer.
4
2D20401A P02-07
4
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on discs
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. VIDEO CDs and
AUDIO CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Playback side
Do not attach paper or tape to discs.
VIDEO CD/AUDIO CD
VIDEO CD/AUDIO CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the centre
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
DVD video discs are copy protected, and any
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
recordings made from these discs will be distorted.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
5
2D20401A P02-07
5
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on discs
(continued)
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions
of this DVD video player. Some DVD video discs are
produced in a manner that allows specific or limited
operation during playback. As such, the DVD video
player may not respond to all operating commands.
This is not a defect in the DVD video player. Refer to
instruction notes of discs.
This DVD video player can play the following discs.
Maximum
playback time
Disc
Size
Disc Mark
Contents
Approx. 4 hours
(single sided disc)
12 cm
Audio
+
video
(moving
pictures)
Approx. 8 hours
(double sided disc)
“ ” may appear on the TV screen during operation.
A “ ” means that the operation is not permitted by
the DVD video player or the disc at the moment.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
STOP (3) button is pressed. Alternatively, the “ ”
may also indicate that the feature is not available for
the disc.
DVD
video
discs
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Approx. 74 minutes
Approx. 20 minutes
12 cm
Audio
+
video
(moving
pictures)
Notes on region numbers
VIDEO
CDs
The region number of this DVD video player is 2. If
region numbers, which stand for their playable area,
are printed on your DVD video disc and you do not
DIGITAL VIDEO
8 cm
2
ALL
find
or
, disc playback will not be allowed by
the player. (In this case, the DVD video player will
display a message on-screen.)
Approx. 74 minutes
Approx. 20 minutes
12 cm
Audio
CDs
Audio
8 cm
(CD
single)
On VIDEO CDs
This DVD video player supports VIDEO CDs
equipped with the PBC (Version 2.0) function. (PBC
is the abbreviation of Playback Control.) You can
enjoy two playback variations depending on types of
discs.
The following discs are also available.
CD-TEXT discs
DVD-R discs of DVD video format
CD-R/CD-RW discs of CD-DA, VIDEO CD, SVCD,
MP3, WMA or JPEG format
• VIDEO CD not equipped with PBC function
(Version 1.1)
KODAK Picture CD and FUJICOLUR CD format
Some of these discs may be incompatible.
Sound and movie can be played on this DVD video
player in the same way as an audio CD.
• VIDEO CD equipped with PBC function
(Version 2.0)
In addition to operation of a VIDEO CD not
equipped with the PBC function, you can enjoy
playback of interactive software with search
function by using the menu displayed on the TV
screen (Menu Playback). Some of the functions
described in this owner’s manual may not work with
some discs.
• You cannot play discs other than those listed
above.
• You cannot play discs of DVD-RAM, DVD-RW,
Photo CD, CVD, or non-standardized discs, etc.,
even if they may be labeled as above.
• This DVD video player uses the PAL (or NTSC)
colour system, and cannot play DVD video discs
recorded in SECAM colour system.
• NTSC DVD or VCD discs will be playback in black
and white if PAL only TV is used.
6
2D20401A P02-07
6
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
SAFETY PRECAUTIONS ..........................2
Precautions ...............................................4
Notes on discs ..........................................5
Table of contents ......................................7
Playback procedure ...............................25
Basic playback................................................ 25
Special playback............................................. 26
Locating a chapter or track ............................. 26
Picture zoom .................................................. 26
Marking the scenes ........................................ 27
Returning to the scenes ................................. 27
Locating desired scene .................................. 27
Title, Chapter and Track Repeat playback ...... 28
A-B Repeat playback ...................................... 28
Programme playback...................................... 29
Random playback ........................................... 29
Changing angles ............................................ 29
Title selection ................................................. 30
DVD menu ...................................................... 30
Changing soundtrack language ...................... 30
Subtitles.......................................................... 30
Disc status ...................................................... 31
To turn off the PBC ......................................... 31
Identification of controls..........................8
Front panel ....................................................... 8
Rear panel ........................................................ 8
Display window ................................................. 9
Remote control ............................................... 10
Loading batteries ............................................ 11
Operating with the remote control .................. 11
Connections ............................................12
Connecting to a TV ......................................... 12
FM/AM aerial connection................................ 13
Connectiong to optical equipment .................. 13
Speaker system connection ........................... 14
Speaker position............................................. 14
Audio setup .............................................15
Tone control .................................................... 15
Bass boost setting .......................................... 15
Selecting surround mode ............................... 16
Speaker setup ................................................ 17
MP3/WMA/JPEG CD operation ..............32
MP3/WMA/JPEG CD information ................... 32
MP3/WMA CD playback ................................. 33
JPEG CD playback ......................................... 34
Slide show playback ....................................... 34
Progressive scan ....................................35
Selecting progressive scan............................. 35
DVD setup ...............................................18
Setting OSD language.................................... 18
Setting Menu language .................................. 18
Setting Subtitle language ............................... 19
Setting Audio soundtrack language ................ 19
Setting the aspect ratio of TV screen ............. 20
Setting on screen display ............................... 20
Setting JPEG Interval ..................................... 21
Setting Select Files......................................... 21
Dynamic Range Control (DRC) ...................... 22
Line1 select .................................................... 22
Parental control setting ................................... 23
To change the parental level........................... 23
Radio operation ......................................36
Tuning the radio stations ................................ 36
Presetting the radio stations ........................... 36
Listening to the radio ...................................... 37
Reception of RDS (Radio Data System) stations .... 37
Other functions .......................................38
Sleep timer ..................................................... 38
Dimmer ........................................................... 38
Mute ............................................................... 38
Using headphone socket ................................ 38
Selecting input source .................................... 38
Screen saver .................................................. 38
Language code list ..................................... 24
Before calling service personnel ..........39
Specifications .......................... Backcover
7
2D20401A P02-07
7
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of controls
See the page in
for details.
Front panel
SKIP buttons
26
ON/STANDBY (
) button
25
Disc tray
25
STOP button
25
DVD/FM/AM button 25
Remote sensor
Display window
Volume knob 25
PLAY button
25
9
OPEN/CLOSE button
25
Rear panel
SCART OUTPUT socket
12
AUDIO (L/R)/VIDEO INPUT
(LINE IN1) sockets 13
12
VIDEO OUTPUT socket
SUBWOOFER socket
14
COMPONENT VIDEO
OUTPUT (Y/PB/PR
sockets 12
)
AUDIO OUTPUT socket
(for Subwoofer)
14
AUDIO (L/R)/VIDEO
INPUT (LINE IN2)
sockets 13
FM-IN ANTENNA
AC mains lead
HEADPHONE
socket 38
13
socket
VIDEO OUTPUT
selector switch 12
AM-IN ANTENNA
OPTICAL IN socket
13
AUDIO (L/R) OUTPUT S-VIDEO OUTPUT
12 12
terminals 13
sockets
socket
COAXIAL IN socket
13
8
2D20401A P08-15
8
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Display window
Play indicator
Dolby Pro Logic II
indicator
Pause indicator
RDS indicator
Dolby Digital
indicator
AM/FM indicator
dts indicator
Message or number indicator
(Title, chapter, track, playing time or other information)
TRK(TRACK) indicator
The display may vary depending on the types of discs you play.
DVD video disc
Video CD
Audio CD
• During playback:
• During playback:
• During playback:
Example
Example
Example
Playing track 1
Playing track 7
Some discs may not display elapsed
time.
Some discs may not display track
numbers or elapsed time.
Some discs may not display track
numbers or elapsed time.
9
2D20401A P08-15
9
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of controls
(continued)
The instructions in this manual describe the functions on the remote control.
See the page in for details.
Remote control
OPEN/CLOSE button 25
*TV ON/STANDBY button 10
DVD ON/STANDBY button 25
*TV-CH buttons 10
SETUP button 18
DVD/FM/AM button 25
SPKR SETUP button 17
*TV INPUT SELECT button 10
*TV-VOL buttons 10
SUBTITLE button
30
RETURN button 15
CANCEL button
ANGLE button 29
ZOOM button 26
23
Direction buttons 15
(D/C/B/A)
ENTER buttons 15
TOP MENU button 30
MENU button
30
SKIP buttons 26
26
36
SEARCH buttons
TUNE+/ buttons
PRESET +/
-
buttons 36
-
PAUSE/STEP button
26
PLAYbutton 25
STOPbutton 25
SLOW +/ buttons 26
-
A-BRPTbutton 28
SURROUND button 16
JUMPbutton 27
BASS BOOST buttons 15
MARKERbutton 27
30
AUDIO button
DISPLAY button 31
SLEEP button
TONEbutton 15
MUTEbutton 38
INPUTSELECTbutton 38
VOL+/ buttons 25
-
38
Numberbuttons 22
PLAYMODE button 28
DIMMERbutton 38
PRGRESSIVE button 35
*TV control buttons
Only TOSHIBA TVs can be operated with this
remote control.
There may be some TV models that cannot be
operated with this remote control. If this is the
case, use the original remote control supplied
with the TV.
10
2D20401A P08-15
10
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading batteries
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Slide the battery compartment cover in the
direction of the arrow.
1
Within about 7 m
Install two “R03” batteries (supplied), paying
2attention to the polarity diagram in the battery
compartment.
Distance: About 7 m from the front of the remote
sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the unit to a
strong light source such as direct sunlight or other
illumination. If you do so, you may not be able to
operate the unit via the remote control.
Replace the compartment cover.
3
Notes on the remote control
• Direct the remote control at the remote sensor of the unit.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
• Do not open the remote control.
• When using the remote control, press the button at
intervals of about 1 second to ensure the correct mode of
operation.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do
not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries with
new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
11
2D20401A P08-15
11
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
Connecting to a TV
Connect the unit directly to your TV. If you connect the unit to a VCR, TV/VCR combination or video selector, the
DVD playback picture may be distorted as DVD video discs are copy protected.
Note: The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced
DVD video picture performance.
To SCART OUTPUT socket
Signal flow
To
To
VIDEO OUT
AUDIO OUT
(R=red, L=white)
To PR
VIDEO VIDEO
OUT OUT
To PB
To Y
VIDEO VIDEO
OUT
To S-
Audio/Video lead
(supplied)
OUT
Scart lead
(supplied)
To
To
video input
audio input
(R=red, L=white)
Component
video leads
(not supplied)
S-video lead
(supplied)
To SCART
input socket
To PR video input
To PB video input
To Y video input
To S-video input
Select the corresponding video
input on your television to watch
DVD video discs.
Make one of following connections depending on your TV.
■ SCART connection
■ S-Video connection
Connect the SCART OUTPUT socket on the unit to
the SCART INPUT socket on the TV using supplied
scart lead.
Connect the S-VIDEO OUTPUT socket on the unit
to the S-VIDEO INPUT socket on the TV using
supplied S-Video lead.
Connect the AUDIO (L/R) OUTPUT sockets on the
unit to the AUDIO (L/R) INPUT sockets on the TV
using Audio lead (not supplied).
Note: If your TV is RGB compatible, slide the VIDEO
OUTPUT selector to left side for better picture
quality.
■ Video connection
Note: Slide the VIDEO OUTPUT selector to right side.
■ Component Video (Color Stream®) connection
Connect the COMPONENT OUTPUT sockets on
the unit to the COMPONENT INPUT sockets on the
TV using supplied Component lead (not supplied).
Connect the AUDIO (L/R) OUTPUT sockets on the
unit to the AUDIO (L/R) INPUT sockets on the TV
using Audio lead (not supplied).
Connect the AUDIO (L/R) and VIDEO OUTPUT
sockets on the unit to the AUDIO (L/R) and VIDEO
INPUT sockets on the TV using supplied Audio/
Video lead.
Note: Slide the VIDEO OUTPUT selector to right side.
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from
the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• If your television set has one audio input, connect the unit to a Y lead adapter (not supplied) and then connect to your TV.
12
2D20401A P08-15
12
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FM/AM aerial connections
Connect the supplied FM/AM aerials for listening to the radio.
• Connector the FM wire aerial to the FM-IN ANTENNA socket.
• Connect the AM loop aerial to the AM-IN ANTENNA terminals.
FM aerial (supplied)
AM loop aerial (supplied)
Notes:
• To prevent noise pickup, keep the AM loop aerial away from the unit and other component.
• Be sure to fully extend the FM wire aerial.
• After connecting the FM wire aerial, keep it as horizontal as possible.
Connecting to optional equipment
You can also enjoy high quality dynamic sounds of an optional equipment by connecting with this unit.
Signal flow
DVD Player
VCR
Audio/Video lead (supplied)
To
To Audio/Video outputs
Audio/Video
outputs
To
Coaxial
output
To
Optical
output
Audio/Video lead
(not supplied)
To
To AUDIO/
VIDEO
INPUT
AUDIO/VIDEO INPUT
To OPTICAL IN
To COAXIAL IN
OPTICAL lead (not supplied)
COAXIAL lead (not supplied)
• The OPTICAL IN and COAXIAL IN sockets are belong to LINE IN 1 input.
If you connect the DVD player using a Optical lead or Coaxial lead, the Video lead must be connected to LINE
IN1 VIDEO INPUT socket.
• If you connect your VCR or DVD player to LINE IN 1 sockets, you must set “LINE 1 select” setting to the
appropriate position. (See page 22.)
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from
the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
13
2D20401A P08-15
13
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker system connection
Turn off the mains first and set the volume knob to low initially before connecting. Connect the speakers using the
supplied speaker leads by matching the colors of the terminals and those and those of the leads. To obtain the
best possible surround sound, adjust the speaker parameters (distance, level etc.).
Front left speaker
(White)
Centre speaker
(Yellow)
Front right speaker
(Red)
Surround
left speaker
(Blue)
Surround
right speaker
(Green)
Notes:
• If you use the BASS LEVEL control on the
Subwoofer, adjust the volume carefully to
avold excessive output on the speakers.
• Do not disassemble the front cover of
supplied speaker.
• The supplied speakers or leads are
designed only for this unit. Never use for
other unit, or it should damage the speaker
and/or the unit.
Subwoofer
Speaker position
In the case of normal position use the 6 speakers (2 front speakers, centre, 2 rear speakers and subwoofer).
■ Front speakers
We recommend that the heigh of the tweeter of the front speakers and listener’s ears are same height. And by hearing position
set up the interval between speakers to 45 degree.
■ Centre speaker
It is ideal that the centre speakers and front speakers are same height. But in normally place it above or below the television.
■ Rear speakers
Place left and right behind the listening area.These speakers recreate sound motion and atmosphere. Required for surround
playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the
level of the listener’s ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound.
In case of the small sizes from the front to rear of the room, if the listener is near the rear wall set the rear speakers opposite
each other, and set the rear speakers above 60 - 90 cm then the listener’s ears, and set up it looks down.
■ Subwoofer
We recommend place it near the front speaker.
To fix the speakers
To avoid the damge or scratch
Example
Example
Approximately 4 mm
Prevention rubber
(supplied)
Note: Take care when installing the speakers. They may cause damage or serious injury
Screw (supplied)
should they fall from their mountings.
14
2D20401A P08-15
14
26/9/03, 6:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio setup
Tone control
Bass boost setting
You can change the sound quality by adjusting the
bass and treble.
You can set bass boost effect on or off.
Press TONE in DVD mode.The “Tone”
Press BASS BOOST in DVD mode. The
screen appears.
“Bass Boost” screen appears.
1
1
Tone Bass Boost Surround SPKR Setup
Tone Bass Boost Surround SPKR Setup
Bass Boost
Off
Bass
Treble
0
0
BACD/Enter/Return
BACD/Enter/Return
Press C or D to select “Bass” or “Treble”,
Press A or ENTER, then press C or D to
then press B or A to adjust the sound level.
select “On” or “Off”.
2
3
2
3
Tone Bass Boost Surround SPKR Setup
Tone Bass Boost Surround SPKR Setup
Bass
Treble
+5
0
Bass Boost
On
BACD/Enter/Return
BACD/Enter/Return
Bass/Treble: –5 ~ +5
Press TONE or RETURN to close the “Tone”
screen.
Press BASS BOOST or RETURN to close
the “Bass Boost” screen.
You can also adjust bass and treble setting in FM/
AM or external input mode as follows.
1. Press TONE.The setting display appears on
the display window.
You can also set bass boost setting in FM/AM or
external input mode as follows.
1. Press BASS BOOST.The setting display
appears on the display window.
Bass/Treble: –5 ~ +5
2. Press B or A to set bass boost “ON” or “OFF”.
3. If setting is complete, press BASS BOOST or
ENTER.
2. Press C or D to select “BASS” or “TREBLE”.
3. Press B or A to adjiust the sound level.
4. If setting is complete, press TONE or ENTER.
15
2D20401A P08-15
15
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting surround mode
You can enjoy surround sound by selecting surround mode.
Auto (AUTO)
The unit selects surround mode automatically
depending on the disc.
Press SURROUND in DVD mode.
The “Surround” screen appears.
1
2
• Dolby Digital
Tone Bass Boost Surround SPKR Setup
Surround Auto
“
” appears on the display window. You can enjoy
up to 5.1 channels of digital surround.
BACD/Enter/Return
• Digital Theater System (DTS)
“
” appears on the display window.
You can enjoy 5.1 channels of high quality digital
audio.
Press A or ENTER, and press C or D to
select “Auto”, “PLII” or “2 Channel”, then
press ENTER.
• Other source (PCM, CD, AM/FM, etc.)
The surround mode is set to 2.1 channel. (Front left/
right and Subwoofer)
Tone Bass Boost Surround SPKR Setup
Auto
Surround
Auto
PLII
2 Channel
PLII (PLII)
“
” appears on the display window.
BACD/Enter/Return
The unit sets all 2 channels sources to Dolby Pro Logic
II mode. If the source is encorded with Dolby Digital 3,
4 or 5.1 channels or DTS, the surround mode is set to
the original one.
Press SURROUND or RETURN to close the
“Surround” screen.
3
2 Channel (2 CH)
The surround mode is set to 2.1 channel.
(Front left/right and Subwoofer)
■ Dolby Digital
Dolby Digital is the surround sound technology
used in theaters showing the latest movies, and is
now available to reproduce this realistic effect in
the home. You can enjoy motion picture and live
concert DVD video discs with this dynamic
realistic sound.
You can also select surround mode in FM/AM or
external input mode as follows.
1. Press SURROUND. The setting display appears
on the display window.
■ Dolby ProLogic II
You can enjoy the dynamic realistic sound of
Dolby Surround Pro Logic Pro Logic II. Pro Logic
II gives you multi channel surround sound from
any stereo source - CDs, MP3 or WMA disc,
tapes, FM broadcasts, etc. You will get the
realistic, involving sound you’d expect from a 5.1-
channel system.
2. Press C or D to select “AUTO”, “PLII” or “2CH”
3. If setting is complete, press SURROUND or
ENTER.
Manufactured under license from Dolby Laboratories.
“Dolby” “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
Notes:
•
There is no Dolby Surround effect when monaural pro-
gramme material is used.
•
When receiving weak FM broadcasts, set it to “2 Channel”.
The sound quality may improve.
■ Digital Theater System (DTS)
DTS is a high quality surround technology used in
theaters and now available for home use, on DVD
video discs or audio CDs.
You can obtain the full benefit of 5.1 channel DTS
encoded sound tracks on DVD video discs or
audio CDs.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
16
2D20401A P16-23
16
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker setup
You may adjust speaker volume balance and delay time according to your listening position.
Press SPKR SETUP in DVD mode.
The “SPKR Setup” screen appears.
Press C or D to select “Volume”, “Test Tone”, “Centre
Delay” or “Surround Delay”.
It is hopeful that the interval from the listener to each
speakers is same to get the best sound quality. If not,
you can adjust the delay time so that the sounds from
speakers will arrive simultaneously to the listener.
Tone Bass Boost Surround SPKR Setup
Volume
Test Tone
Set
Off
Centre speaker
Centre Delay
Surround Delay
BACD/Enter/Return
0ms
0ms
Front Left speaker
Front Right speaker
DC
DF
DF
Volume
You can adjust the volume level of each speaker.
1.Press ENTER or A.The “Volume”screen appears.
DR
DR
Tone Bass Boost Surround SPKR Setup
Rear Left speaker
Rear Right speaker
Volume
Set
Off
Test Tone
Centre Delay
Surround Delay
BACD/Enter/Return
0ms
0ms
B
Front Left
Vol.00
A
Centre Delay
If the distance of DC is equal or longer than DF, set
the delay time to “0ms” using B or A.
2. Press B or A to select the desired speaker.
3. Press C or D to adjust the volume level as desired
(“0” ~ “–10”).
4. Repeat steps 2 ~ 3 for other speakers.
5. Press SPKR SETUP or RETURN to close the
“SPKR Setup” screen.
If the distance of DC is shorter than DF, set the Cen-
tre Delay time using B or A as follows.
DF – DC
Setting
Tone Bass Boost Surround SPKR Setup
Volume
Test Tone
Set
Off
30cm (approx.) 1ms
60cm (approx.) 2ms
90cm (approx.) 3ms
120cm (approx.) 4ms
150cm (approx.) 5ms
You can also adjust the volume level of each speaker
in FM/AM or external input mode as follows.
1. Press SPKR SETUP.The setting display appears
on the display windows.
Centre Delay
Surround Delay
0ms
0ms
BACD/Enter/Return
Surround Delay
If the distance of DR is equal or longer than DF, set
the delay time to “0ms” using B or A.
2. Press C or D to select the desired speaker.
3. Press B or A to adjust the volume level as desired
(“0” ~ “–10”).
4. If adjusting is complete, press SPKR SETUP or
ENTER.
If the distance of DR is shorter than DF, set the Sur-
round Delay time using B or A as follows.
DF – DR
Setting
Tone Bass Boost Surround SPKR Setup
Volume
Test Tone
Set
Off
Test Tone
150cm (approx.) 5ms
300cm (approx.) 10ms
450cm (approx.) 15ms
Centre Delay
Surround Delay
0ms
0ms
You can adjust the sound balance of the speakers.
1. Press ENTER or A. The “Test Tone” screen ap-
pears. The test tone comes out for 3 seconds from
each speakers in the following order.
BACD/Enter/Return
Front Left
Centre
Front Right
Rear Right
...
Press SPKR SETUP or RETURN to close the “SPKR
Rear Left
Sub Woofer
Front Left
Setup” screen.
Tone Bass Boost Surround SPKR Setup
Volume
Test Tone
Set
On
Centre Delay
Surround Delay
BACD/Enter/Return
0ms
0ms
Front Left
Vol.00
2. If the test tone balance is not kept, press C or D to
adjust the volume level as desired (“0” ~ “–10”)
while the desired speaker is activating.
3. Repeat step 2 for other speakers.
4. Press SPKR SETUP or RETURN to close the
“SPKR Setup” screen.
17
2D20401A P16-23
17
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD setup
When each setup function (page 18 ~ 24) has been completed, the unit can always be operated under the same
conditions (especially with DVD discs).
Each setup command will be retained in the memory even if you turn the power off.
Setting OSD language
Setting Menu language
The setup language can be selected.
You can select the language of the DVD disc menu
display.
Press SETUP in the stop mode.
Press SETUP in the stop mode.
Press 5or ENTER, then press 4or 5to select
“Menu”.
Press 5 or ENTER, then press 4 or 5 to
select “OSD”.
1
1
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
OSD
English
OSD
English
Menu
Subtitle
Audio
English
Automatic
English
Menu
Subtitle
Audio
English
Automatic
English
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press a or ENTER, then press 4 or 5 to
select your desired language.
Press a or ENTER.
Press 4or 5to select your desired language.
2
2
Language
Picture
English
English
Automatic
English
Audio
Parental
English
Francais
Espanol
Deutsch
Italiano
Language
Picture
Audio
Parental
English
Francais
Espanol
Deutsch
Italiano
OSD
OSD
English
Menu
Subtitle
Audio
Menu
Subtitle
Audio
English
Automatic
English
Portugues
Nederlands
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press ENTER.
The selected language remains.
Press ENTER.
The selected language remains.
3
4
3
4
Press SETUP or RETURN to close the
screen.
Press SETUP or RETURN to close the screen.
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation.
Disconnect the AC mains lead once, then connect it
again.
English, Francais, Espanol, Deutsch, Italiano,
Portugues, Nederlands:
The selected language is the first-priority Menu language.
Other:
If you want to select another language, enter the
language code with number buttons (0–9) (see the
“Language code list” on page 24).
18
2D20401A P16-23
18
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Subtitle language
Setting Audio soundtrack language
The same subtitle language can always be selected
even if you replace the disc or turn the power off.
The same audio soundtrack language can always be
selected by your unit even if you replace the disc or
turn the power off.
Press SETUP in the stop mode.
Press SETUP in the stop mode.
Press 5 or ENTER, then press 4 or 5 to
select “Subtitle”.
Press 5or ENTER, then press 4or 5to select
“Audio”.
1
1
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
OSD
English
OSD
English
Menu
Subtitle
Audio
English
Automatic
English
Menu
Subtitle
Audio
English
Automatic
English
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press a or ENTER, then press 4 or 5 to
Press a or ENTER, then press 4 or 5 to
select your desired language.
select your desired language.
2
2
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
English
Portugues
Nederlands
Other
Automatic
Off
OSD
English
OSD
English
Francais
Espanol
Deutsch
Italiano
Menu
Subtitle
Audio
English
Automatic
English
Menu
Subtitle
Audio
English
Automatic
English
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press ENTER.
The selected language remains.
Press ENTER.
The selected language remains.
3
4
3
4
Press SETUP or RETURN to close the screen.
Press SETUP or RETURN to close the screen.
English, Francais, Espanol, Deutsch, Italiano,
Portugues, Nederlands:
The language you have selected will play if it is recorded
on the disc.
English, Francais, Espanol, Deutsch, Italiano,
Portugues, Nederlands:
The language you have selected will play if it is recorded
on the disc.
Other:
Other:
If you want to select another language, enter the language
code with number buttons (0–9). (See the “Language
code list” on page 24.)
If you want to select another language, enter the language
code with number buttons (0–9). (See the “Language
code list” on page 24.)
Original:
Automatic:
The unit will select the first priority language of each disc.
• The unit will automatically select the same language in
the “Audio” setting.
• When the unit selects the same language as the
“Audio”, the subtitles will not appear during play.
• When you do not use the same language as the
“Audio”, the subtitles will appear during play.
Off:
Subtitles do not appear.
19
2D20401A P16-23
19
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the aspect ratio of TV screen
Setting on screen display
On screen display can be viewed when you press the
operation buttons.
You can select an aspect ratio appropriate to your TV.
Press SETUP in the stop mode.
Press bor ato select “Picture”, then press 5
or ENTER.
Press SETUP in the stop mode.
Press bor ato select “Picture”, then press 5
or ENTER.
1
1
Press 4or 5to select “Tv Screen”.
Press 4or 5to select “Display”.
2
2
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
Tv Screen
Display
JPEG Interval
Select Files
4:3
On
Off
All
Tv Screen
Display
JPEG Interval
Select Files
4:3
On
Off
All
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press aor ENTER, then press 4or 5to select
your desired screen type.
Press b / a or ENTER to select “On” or “Off”.
3
3
Language
Picture
Audio
Parental
Language
Picture
4:3
Audio
Parental
Tv Screen
Display
JPEG Interval
Select Files
4:3
On
Off
All
On
Off
Tv Screen
Display
4:3
4:3
On
JPEG Interval
Select Files
Off
All
16:9
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
On: On screen displays appear when you press the
operation buttons.
Off: On screen displays do not appear when
operation buttons are pressed.
You have the following screen size to choose from:
4:3 : LETTERBOX
Select this mode when connecting to a conventional
TV. When playing back a wide screen-DVD disc, it
displays the wide picture with black bands at the top
and bottom of screen.
Press SETUP or RETURN to close the screen.
4
4:3
: PAN SCAN (Conventional mode)
Displays the wide picture on the whole screen with
left and right edges automatically cut off.
16:9
: WIDE SCREEN
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
Press ENTER.
The selected TV screen remains.
4
Press SETUP or RETURN to close the screen.
5
Note:
If the DVD disc is not formatted in the pan & scan style, it will
display a letterboxed picture.
20
2D20401A P16-23
20
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting JPEG Interval
Setting Select Files
You can continuously play back all JPEG files automati-
cally.
After the setting below, start playing the disc on which
JPEG files have been recorded.
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
Press SETUP in the stop mode.
Press SETUP in the stop mode.
Press bor ato select “Picture”, then press 5
or ENTER.
Press bor ato select “Picture”, then press 5
or ENTER.
1
1
Press 4or 5or ENTER to select “Select Files”.
Press 4 or 5 or ENTER to select “JPEG
Interval”.
2
2
Language
Picture
4:3
Audio
Parental
Language
Picture
4:3
Audio
Parental
Tv Screen
Display
Tv Screen
Display
On
On
JPEG Interval
Select Files
Off
All
JPEG Interval
Select Files
Off
All
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press a or ENTER, then press 4 or 5 to
Press a or ENTER, then preess 4 or 5 to
select your desired time.
select your desired file type.
3
3
Language
Picture
4:3
Audio
Parental
Language
Picture
Audio
Parental
Tv Screen
Display
Off
5 Seconds
Tv Screen
Display
4:3
On
All
Music Only
Pictures Only
On
JPEG Interval
Select Files
Off
All
10 Seconds
15 Seconds
JPEG Interval
Select Files
Off
All
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Off:
Plays back one file at a time.
All:
Displays all files on the file menu.
5 Seconds:
Plays back images in the form of a slide show at
5-second intervals.
Music Only:
Displays only MP3/WMA files on the file menu.
10 Seconds:
Plays back images in the form of a slide show at
10-second intervals.
Pictures Only:
Displays only JPEG files.
15 Seconds:
Plays back images in the form of a slide show in
15-second intervals.
Press ENTER.
Press ENTER.
The selected file type remains.
The selected interval time remains.
4
4
Press SETUP or RETURN to close the screen.
Press SETUP or RETURN to close the screen.
5
5
21
2D20401A P16-23
21
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic Range Control (DRC)
Line1 Select
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
If you connect an another unit (DVD, VCR or etc.) to
the LINE IN1 sockets, you must select the type of
audio input.
Press SETUP in the stop mode.
Press SETUP in the stop mode.
Press b or ato select “Audio”, then press 5
or ENTER.
Press b or ato select “Audio”, then press
5or ENTER.
1
1
Press 4or 5to select “DRC”.
Press 4or 5to select “Line1 Select”.
2
2
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
DRC
Line1 Select
Std
Coaxial
DRC
Line1 Select
Std
Coaxial
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Press a or ENTER, then press 4 or 5 to
Press a or ENTER, then press 4 or 5 to
select your desired sound type.
select the appropriate type of audio input.
3
3
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
DRC
Line1 Select
Std
Coaxial
Max
Std
Min
DRC
Line1 Select
Std
Coaxial
Optical
Coaxial
Analog
BACD/Enter/Setup/Return
BACD/Enter/Setup/Return
Max: Full dynamic range is increased.
Std: Full dynamic range is maintained.
Min: Dynamic range is reduced.
Press ENTER.
The selected appropriate type remains.
4
5
Press ENTER.
The selected sound type remains.
4
Press SETUP or RETURN to close the screen.
Press SETUP or RETURN to close the screen.
5
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ depending
on DVD video disc.
22
2D20401A P16-23
22
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control setting
To change the parental level
Some discs are specified as not suitable for children.
Playback of such discs can be restricted with this unit.
Select “Password” on step 2 as left, then
input your password with number buttons
(0–9).
1
Press SETUP in the stop mode.
Press b or ato select “Parental”, then press
5or ENTER.
1
Language
Picture
1 2 3 4
Audio
Parental
Password
Parental
1
0-9/Cancel
BACD/Enter/Setup/Return
Press 4or 5to select “Parental”.
Press ENTER.
The rating is now unlocked.
2
2
3
4
Language
Picture
Audio
Parental
Language
Picture
Audio
Parental
----
Off
Password
Parental
----
1
Password
Parental
BACD/Enter/Setup/Return
0-9/Cancel
BACD/Enter/Setup/Return
Press b or a until the level you require
appears.
3
Press 4or 5to select “Parental”, then press
bor ato change the parental level.
Language
Picture
Audio
Parental
----
1
Password
Parental
Language
Picture
Audio
Parental
----
5
Password
Parental
BACD/Enter/Setup/Return
• Level Off
• Level 8
• Level 1
:
:
:
The parental control setting does
not function.
Virtually all DVD software can be
played back.
DVD software for adults cannot be
played back.
BACD/Enter/Setup/Return
Press 4or 5to select “Password”, then
press number buttons (0–9) to enter the
password.
• Select from level 1 to level 8. The limitation will be
more severe as the level number decreases.
Note: You can change the password at this time if you want.
Press 4or 5to select “Password”.
Press number buttons (0–9) to input a 4-
Press ENTER.
4
The parental level is changed and locked.
digit password. Be sure to remember this
number!
Parental
5
Language
Picture
Audio
1 2 3 4
Password
Parental
1
0-9/Cancel
BACD/Enter/Setup/Return
Press SETUP or RETURN to close the screen.
6
•
If you input a wrong number, press CANCEL.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
Press ENTER to store the password.
5
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding STOP down on the front panel, press
7 on the remote control. “PASSWORD CLEAR”
appears on the screen.
Note: Now the rating is locked and the setting cannot be
changed unless you enter the correct password.
Press SETUP or RETURN to close the screen.
5. Enter a new password again.
6
Notes:
•
Depending on the discs, the unit may not be able to limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.”
For those discs, the parental control feature will not work.
23
2D20401A P16-23
23
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and “Audio” language on page 18 and 19.
LanguageName Code LanguageName Code LanguageName Code LanguageName Code
Abkhazian
Afar
1112 Fiji
1620 Lingala
1619 Lithuanian
1628 Macedonian
1635 Malagasy
1722 Malay
2224 Singhalese
2230 Slovak
2321 Slovenian
2317 Somali
2329 Spanish
2322 Sundanese
2330 Swahili
2319 Swedish
2328 Tagalog
2325 Tajik
2919
2921
2922
2925
1529
2931
2933
2932
3022
3017
3011
3030
3015
3018
1225
3019
3025
3028
3021
3033
3121
3128
3136
3219
3225
1335
3325
3418
2019
3525
3631
1111 Finnish
1116 French
2927 Frisian
1123 Galician
1128 Georgian
1835 German
1129 Greek
1135 Greenlandic
1136 Guarani
1211 Gujarati
1531 Hausa
Afrikaans
Albanian
Amharic
Arabic
2111 Malayalam
1415 Maltese
1522 Maori
Armenian
Assamese
Aymara
2122 Marathi
1724 Moldavian
1731 Mongolian
1811 Nauru
Azerbaijani
Bashkir
2324 Tamil
Basque
2411 Tatar
Bengali; Bangla 1224 Hebrew
1933 Nepali
2415 Telugu
2425 Thai
Bhutani
Bihari
1436 Hindi
1819 Norwegian
1831 Oriya
1218 Hungarian
1228 Icelandic
1217 Indonesian
2335 Interlingua
1215 Irish
2528 Tibetan
2611 Tigrinya
Breton
1929 Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
1924 Pashto, Pushto 2629 Tonga
1911 Persian
1711 Polish
1611 Turkish
2622 Turkmen
2630 Twi
2123 Italian
1930 Portuguese
2011 Quechua
1311 Japanese
3618 Javanese
1325 Kannada
1828 Kashmiri
1329 Kazakh
1411 Kirghiz
2422 Korean
1524 Kurdish
1525 Laothian
1530 Latin
2731 Ukrainian
2033 Rhaeto-Romance2823 Urdu
2124 Romanian
2129 Russian
2121 Samoan
2135 Sanskrit
2125 Scots Gaelic
2131 Serbian
2825 Uzbek
2831 Vietnamese
2923 Volapük
2911 Welsh
1714 Wolof
Danish
Dutch
English
2928 Xhosa
Esperanto
Estonian
Faroese
2225 Serbo-Croatian 2918 Yiddish
2211 Shona
2924 Yoruba
2914 Zulu
1625 Latvian, Lettish 2232 Sindhi
24
2D20401A P24-31
24
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback procedure
Basic playback
Preparation:
• Turn ON the TV and select to the corresponding video input.
Adjust the volume by rotating Volume knob on
the front panel or VOL +/– on the remote con-
trol.
Press
(ON/STANDBY).
(If the unit is in FM/AM mode, press DVD/FM/
AM to select DVD mode.)
“Reading” display will change to “No Disc”.
(If DVD disc has already loaded, playback will
start automatically.)
1
5
6
No Disc
welcome
Press STOP to end playback.
Press OPEN/CLOSE.
The disc tray will open.
Resuming facility
2
3
• The unit memorizes the stop location, “ ” ap-
pears on the screen. Press PLAY to resume
playback (from the stopped location).
• If you press STOP again or unload the disc (“
appears on the screen.), the unit will clear the
stopped location from its memory.
”
Place a disc onto the disc tray.
Hold the disc, position it with the printed label
side up, align it with the guides, and place it in
its proper position.
To stop playback, press STOP.
Then press OPEN/CLOSE.
The disc tray opens.
7
Remove the disc then press
(ON/
STANDBY).
The disc tray closes automatically and unit turns
off.
For 12cm disc
For 8cm disc
Press PLAY or OPEN/CLOSE.
The disc tray closes automatically.
4
On the screen display,
“
”
changes to
Notes:
“Reading” and then playback commences.
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region
Code Error” or “Parental Error” will appear on the screen ac-
cording to the type of loaded disc. In this case, check your disc
again (see pages 6 and 23).
• Some discs may take a minute or so to start playback.
• When you insert a disc with the label facing downwards (ie. the
wrong way up) and press PLAY or OPEN/CLOSE on the unit,
“Reading” will appear on the display and then “Incorrect Disc”
will be displayed.
• A menu screen will appear on the TV
screen, if the disc has a menu feature.
• Some discs may not work the resuming facility
.
Press
/
or
/
to select desired title,
• Resuming cannot function when you play a PBC-featuredVideo
CD while the PBC is on. To turn off the PBC, see page 31.
• Some playback functions of DVDs may be intentionally fixed
by software producers. This unit plays DVDs in accordance
with the design intent of the software producers. Some play-
back features may not be available. Also refer to the instruc-
tions supplied with the DVD.
then press ENTER or PLAY.
The title is selected and play commences.
25
2D20401A P24-31
25
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a chapter or track
Special playback
Note: There may be a slight delay between you pressing the
button and the function activating.
+
Press SKIP Forward or SKIP – Reverse during
playback to locate a chapter or track that you want
to watch.
Fast forward playback
Press SEARCH + during normal playback.
Each press of SEARCH + will increase the speed of
the search
,
,
,
.
+
• Press SKIP briefly to select the next chapter/
track.
• Press SKIP – briefly to return to the beginning of
the current chapter/track.
• Press SKIP – twice in quick successions to se-
lect the previous chapter/track.
Review playback
Press SEARCH – during normal playback.
Each press of SEARCH – will increase the speed
of the search
,
,
,
.
Picture zoom
This unit will allow you to zoom in on an image. You
can then make selections by switching the position of
the zoom point on the frame.
Still playback
Press PAUSE/STEP during normal playback to
pause playback.
Press ZOOM during playback.
The centre part of the image will be zoomed in.
1
1
Frame advance
Press PAUSE/STEP during still playback.
One frame is advanced each time you press PAUSE/
STEP.
Each press of ZOOM will change the ZOOM as
follows.
1
2
3
DVD
(x 1.3)
(x 1.5)
(x 2.0)
1
2
–
Video CD
Slow-motion playback
(x 1.3)
(x 1.5)
Press SLOW
–
Reverse or SLOW
+
Forward
during normal playback or still playback.
Each press of SLOW + or – will change the
speed of the slow x1/2, x1/4, x1/6, x1/7.
Press
the frame.
/
/
/
to view a different part of
2
3
You may move the frame from the centre
position to UP, DOWN, LEFT or RIGHT
direction.
■ To resume normal playback.
Press PLAY.
Note:
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view (
The VIDEO CD can not play Reverse Slow.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STEP.
Off).
Notes:
• You can select Pause, Slow or Search playback from the
zoom mode.
• Some discs may not respond to the zoom feature.
26
2D20401A P24-31
26
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Marking the scenes
Locating desired scene
Use the title, chapter and time recorded on the disc to
locate the desired playback point.
The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
Press MARKER during playback.
Press JUMP during playback.
1
1
Jump
Time
Title
Chapter
Marker
Marker
Marker
1
2
3
/Enter/Cancel/Marker
/Enter/0 9/Cancel/Jump
Select the blank Marker using
/
.
Press
or
to select the “Time”, “Title” or
Then press ENTER at the desired scene.
“Chapter”.
2
2
3
Jump
Time
Title
Chapter
Marker
Marker
Marker
1
2
3
00 27 54
/Enter/Cancel/Marker
/Enter/0 9/Cancel/Jump
• Repeat this procedure to set the other 2
scenes.
Press number buttons (0–9) to change the
number.
Press MARKER to remove this display.
3
Jump
Time
Title
Chapter
12
/Enter/0 9/Cancel/Jump
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or
turn the power off.
• Some subtitles recorded around the marker may fail to
appear.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to
check the numbers.
Press ENTER.
4 Playback starts.
Returning to the scenes
Press MARKER during playback or stop mode.
• When you change the title, playback starts
1
from Chapter 1 of the selected title.
• Some discs may not be compatible with the
above operation.
Marker
Marker
Marker
1
2
3
/Enter/Cancel/Marker
Press
/
to select the Marker 1 ~ 3.
2
3
Marker
Marker
Marker
1
2
3
00 27 54
01
02
16 25
08 31
/Enter/Cancel/Marker
Press ENTER.
Playback starts from the marked scene.
To cancel the mark
Press CANCEL in step 2.
• To remove this display, press MARKER.
27
2D20401A P24-31
27
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Title, Chapter and Track Repeat
playback
A-B Repeat playback
A-B repeat playback allows you to repeat material
between two selected points.
Press PLAYMODE during playback or stop mode.
Press A-B RPT during playback.
The start point is selected.
1
A
DVD
Press
/
or ENTER once or twice to select
“Chapter” or “Title”.
Press A-B RPT again.
The end point is selected. Playback starts at
the point that you selected. Playback stops at
the end point, and resumes again at point A.
Repeat
/Enter/Play Mode
Off
2
Audio CD, Video CD, MP3/WMA CD
A
B
Press
to select “Repeat”.
Press
/
or ENTER once or twice to select
“Track” or “All”.
Play Mode
Repeat
Off
Off
/Enter/Play Mode
• To resume normal playback press A-B RPT
again. “ ” appears on the screen.
Off
Press PLAY to start Repeat playback.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations
may not be displayed.
• You can not set the A-B Repeat for the scenes that in-
clude multiple angles.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/
WMA/JPEG CD.
• A-B Repeat is prohibited when PBC is on.
• To resume normal playback, select Repeat “Off”.
Notes:
• In case of Video CD, repeat functions are prohibited
during playback.
• Some discs may not be compatible with the repeat
operation.
28
2D20401A P24-31
28
26/9/03, 6:02 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme playback
Random playback
You can arrange the playback order of tracks on the
disc.
Press PLAYMODE in the stop mode.
1
2
Press PLAYMODE in the stop mode.
1
Press
/
/
to select “Play Mode”, then press
or ENTER to select “Random”.
Press
/
/
to select “Play Mode”, then press
or ENTER to select “Program”.
Play Mode
Repeat
:
:
Random
Off
2
3
/Enter/Play Mode
Play Mode
Repeat
:
:
Program
Off
1
2
3
4
5
6
7
8
9
10
11
12
Press PLAY.
Random playback will start.
• To cancel Random playback, select “Off” in
step 2.
Clear
Program Playback
/Enter/0 9/Cancel/Play Mode
3
Press
/
or
/
to select the program-
ming position. Use number buttons (0–9) to
input the Track numbers.
Play Mode
Repeat
:
:
Program
Off
1 9
4
5
6
7
8
9
10
11
12
2
3
3
11
Changing angles
Clear
Program Playback
/Enter/0 9/Cancel/Play Mode
When playing back a disc recorded with multiple
camera angles, you can change the angle that you
are viewing.
• To programme others, repeat step 3.
• If you input a wrong number, press CANCEL.
Press
/
or
/
to select “Program
Press ANGLE during playback.
The current angle will appear.
Playback” and press ENTER.
The programmes in the order you selected will
start playback.
To return to normal playback, select Play
Mode: “Off”.
4
1
1/9
Press ANGLE repeatedly until the desired
angle is selected.
2
■ To change the programme
1. In the programme mode, press 4, 5, b or a to
select the track number.
2. Press number buttons (0–9) to select the track
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
number to be replaced.
■ To clear the programme one by one
In the programme mode, press 4, 5, bor ato select
the track number. Then press CANCEL.
■ To clear all the programmes
In the programme mode, press 4, 5, bor ato select
“Clear”. Then press ENTER.
Note:
The programme is cancelled when you open the disc tray
or turn the power off.
29
2D20401A P24-31
29
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Title selection
Changing soundtrack language
Two or more titles may be recorded on some discs. If a
title menu is recorded on the disc, you can select the
desired title.
You can select a desired language from a multilingual disc.
Press AUDIO during playback.
Press TOP MENU during playback.
The current soundtrack language will appear.
Title menu appears on the screen.
1
1
1/8 Eng Dolby Digital
Press
/
or
/
to select the desired title.
2
3
Press AUDIO repeatedly until the desired
language is selected.
2
Press ENTER or PLAY.
The playback of the selected title will start.
In case of VIDEO CD playback
Audio type changes as follows each time you press AUDIO.
LR v
L v
R
Notes:
• If the desired language is not heard after pressing the but-
ton several times, the soundtrack language is not recorded
on the disc.
DVD menu
• A selected soundtrack language may be cancelled when you
open the disc tray.
The initial default language or available language will be heard
if the disc is played back again.
Some DVDs allow you to select the disc contents via
the disc menu.
When you play back these DVDs, you can select the
subtitle language and sound-track language, etc. from
the MENU.
Press MENU during playback.
The DVD menu appears on the screen.
Subtitles
1
When playing back a disc recorded with subtitles, you
can select the subtitle language or turn the subtitle off.
Press SUBTITLE repeatedly during playback
until your desired language appears.
• Press MENU again to resume playback at
the scene when you pressed MENU.
1
Press
/
or
/
to select the desired item.
1/8 Eng
2
• To turn off the subtitle, press SUBTITLE
until “Off” appearst.
The on-screen display will disappear after a
few seconds.
2
Press ENTER.
Notes:
The menu continues to another screen.
Repeat steps 2 and 3 to set the item completely.
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
3
• In some cases, a selected subtitle language may not be
changed immediately.
Note:
Depending on the DVD, you may not be able to select the
title. On some DVD’s a “title menu” may simply be called a
“menu” or “top menu” in the instructions supplied with the
disc.
30
2D20401A P24-31
30
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Status
With each press of DISPLAY, the status of the disc
will appear on the screen and change as follows.
DVD
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
Title
1/8 EngDolby Digital
1/32 Eng
To make status display disappear, press DISPLAY
again.
VIDEO CD
00:12
04:32
PBC
00:12
04:32
Track –/–
To make status display disappear, press DISPLAY
again.
AUDIO CD
34:56
71:33
Track 11/99
When you playback the CD disc, the status display
will appear on the screen and continue displaying.
To turn off the PBC
Press number button 1 in the stop mode, then press
ENTER.
31
2D20401A P24-31
31
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG CD OPERATION
ThisplayercanplaybacktheMP3/WMA/JPEG-datawhichhasbeenrecordedonCD-RorCD-RW. ToproducetheMP3/
WMA/JPEG-data, youneedaWindows-PCwithCD-ROMdriveandaMP3/WMA/JPEG-encodingSoftware(notsupplied).
The Apple-HFS-System can not be played.
MP3/WMA/JPEG CD information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension
letters, “mp3”, “wma”, “jpg”.
• MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
• Thisunitcanread200filesperdisc.Ifonedirectoryhasmorethan200files,itreadsupto200files,theremaining
files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc.
• MP3/WMA/JPEG CDs cannot be used for playback for the purpose of recording.
• If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of Athrough Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1.Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2.Name each file including two-digit or three-digit number (e.g. “01” “02” or “001” “002”).
3.Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs can not be played back depending on the recording conditions.
• The CD-R/RW that has no music data or non MP3/WMA/JPEG files can not be played back.
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
32
2D20401A P32-BACK
32
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA CD playback
Place a disc on which MP3 or WMA files have
been recorded onto the disc tray.
About file menu
Operation
Media type
1
Elapsed time
File number
A file menu screen will appear on the screen.
Press
/
or ENTER to select folder.
2
Folder
-/72 --:--
CD-R
Pops
1
2
3
4
5
6
7
8
9
Japan
Bay Bridge
CLOSE MY EYES 10
flower
Lies and Truth-
winter fall
Rain
Strawberry
Welcome party
Thailand
DIVE TO BLUE 11
Honey
BLUE EYES
Blurry Eyes
12
13
14
/0-9/Enter/Play Mode/Menu
/0-9/Enter/Play Mode
: Indicates MP3-file
: Indicates WMA-file
: Indicates JPEG-file
Press
/
or
/
or number buttons
(0–9) to select the desired file.
3
Notes:
• The picture menu is displayed when the FUJICOLOR
CD or the Kodak Picture CD are played. To display the
file menu press TOP MENU.
• In the case of a CD containing a mixture of MP3, WMA
and JPEG files, the files are played back by selecting
them from the file menu.
• In case the folder includes more than 15 files,
press
or
to display next file list.
-
/72 --:--
CD-R
-
/72 --:--
CD-R
•
MP3 or WMA file on the KODAK Picture CD is not
recognized on this unit.
Pops
Mother
Hold Your Last
Pops
Japan
Bay Bridge
15
16
1
2
3
4
5
6
7
8
9
flower
Lies and Truth-
winter fall
Rain
Strawberry
Welcome party
Thailand
CLOSE MY EYES 10
DIVE TO BLUE 11
Honey
12
13
14
BLUE EYES
Blurry Eyes
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
• When PLAY has been pressed after displaying
the file menu, or when the disc tray has been
closed using PLAY, playback begins automati-
cally starting from the first file. In this case, if the
first file is an MP3/WMA file, only MP3/WMA files
are played back in order If the first file is a JPEG
file, the first JPEG file is played back.
Press ENTER.
The selected file starts playing back.
4
Press STOP to end playback.
5
Notes:
• During MP3/WMA/JPEG-Playback, you can not use
SEARCH, A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Programme playback for MP3/WMA/JPEG CD Playback
(see pages 28 and 29).
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• The unit records the stopped point. “
appears on the screen. Press PLAY to
resume playback (from the scene point).
• If you press STOP again or unload the disc,
the unit will clear the stopped point.
”
33
2D20401A P32-BACK
33
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG CD playback
Slide show playback
The slide show enables you to view pictures (files) one
after another automatically.
Place a disc on which JPEG files have been
recorded onto the tray.
1
Preparation:
• Set “JPEG Interval” setting to “5 Seconds”, “10 Sec-
onds” or “15 Seconds” (see page 21).
A file menu screen will appear on the screen.
Press
/
to select folder.
2
Select your desired starting file for the slide
show in the step 3 as left.
1
Press ENTER to start slide show from the
selected file.
2
Press
/
or
/
or number buttons
(0–9) to select the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
3
• If you press PAUSE during the slide show,
the slide show stops temporary. “k” appears
briefly on the picture.
If the picture appears upside down or
sideways, press ANGLE repeatedly until
it’s right side up.
Press
file.
/
or
/
to select the desired
“
”, “
”, “
” or “
” appears
briefly on the screen.
Press PLAY or SKIP + again to resume
the slide show.
• When the slide show playback finished the
file list appears.
• To stop the slide show, press STOP.The file
list appears.
• To display next list, press SKIP +/–.
• When PLAY has been pressed after
displaying the file menu, or when the disc
tray has been closed after pressing PLAY,
playback begins automatically starting from
the first file. In this case, if the first file is a
JPEG file, the first JPEG file is played back.
If the first file is an MP3/WMA file, only
MP3/WMA files are played back in order.
Press ENTER.
The selected picture appears on the screen.
4
5
Rotating an image
You can rotate an image by 90 degrees by
pressing ANGLE during playback of the image.
“
”, “
”, “
” or “
” appears
briefly on the screen.
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat
steps 3 ~ 4.
34
2D20401A P32-BACK
34
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive scan
The progressive scan capability provides the highest resolution pictures with less flicker and line structure.
If you are using the Component video sockets, but are connecting the unit to a standard (analog) television, set
PROGRESSIVE to Off.
IfyouareusingtheComponentvideosocketsforconnectiontoaTVormonitorthatiscompatiblewithaprogressive
scan signal, set PROGRESSIVE to On.
Note: This unit supports the progressive scan only for NTSC DVDs.
Selecting progressive scan
Preparation:
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
videocontent(videosignalsrecordedat30framesper
second).
• Connect to a TV equipped with component sockets.
• Turn ON the TV and set it to the corresponding video input
mode.
• Set the VIDEO OUTPUT selector switch on the rear panel
to COMPONENT position.
• Press DVD/FM/AM selector to select the DVD mode.
When the unit plays back a film source material,
uninterlaced
progressive output signals are created using the origi-
nal information. When a video content is played back,
the unit interleaves lines between the interlaced lines
on each to create the interpolated picture and outputs
as the progressive signal.
Load an NTSC DVD disc.
Press PROGRESSIVE in the stop mode.
1
The current progressive mode appears on the
display window for 4 seconds.
Press PROGRESSIVE again to change the
progressive mode “ON” or “OFF” during the
progressive mode appears on the display win-
dow.
• The unit recognizes the picture source (film or
video) of the current disc according to the disc
information.
Press PLAY to start playback.
2
■ To select PROGRESSIVE scan Off
On the step 1 above, select “PRO. OFF”.
Notes:
• JPEG CDs can not be play back with the progressive scan-
ning mode.
• Some discs may not be played back with the progressive scan-
ning mode correctly because of the disc characteristics or re-
cording condition.
• If your TV does not accept the progressive scan format, the
picture will appear scrambled if you select progressive scan
output from the unit. In such a case, select PROGRESSIVE
scan Off.
35
2D20401A P32-BACK
35
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation
Tuning the radio stations
Presetting the radio stations
You can preset 30 stations for FM and AM.
Automatic presetting
Press DVD/FM/AM to select FM or AM.
1. Press DVD/FM/AM to select FM or AM.
1 “TUNER FM” or “TUNER AM” appears on the win-
dow display for 3 seconds and changes to radio
operation mode.
2. Press SETUP for 2 seconds. “A. PRESET” ap-
pears on the window display, then starts the au-
tomatic presetting from the low end of FM band
to the AM band.
Automatic tuning
2 Press and hold TUNE + or – for 1 second to start
the automatic tunning.The scanning stops when
the unit tunes in a station.Press the button again
to tune the other stations.
After all FM and AM stations have been preset, au-
tomatic presetting stops and the station memorized
position 1 will be listened.
Manual tuning
Press TUNE + or – briefly to tune in a station.
The frequency changes in 50 kHz steps for FM
and 9 kHz steps for AM.
Manual presetting
1. Tune the station to be preset as described in “Au-
tomatic/Manual tuning”.
2. Press SETUP. “M. PRESET” appears on the win-
dow display, then the preset position number blinks.
3. Press PRESET + or – to select the position num-
ber to be preset.
4. Press ENTER. The preset position number stops
blinking and now the station is preset in the
memory.
5. Press SETUP.The preset position number disap-
pears.
6. For presetting of other stations, repeat steps 1 ~ 5
above.
36
2D20401A P32-BACK
36
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
Reception of RDS (Radio Data
System) stations
Preset the radio stations first as described on page 36.
RDS (Radio Data System) is a system gradually being
introduced on FM in many countries, where by an inau-
dible stream of data is transmitted in addition to the nor-
mal radio signal. This data contains various information
including station/transmitter identification, traffic informa-
tion and a list of alternative frequencies for the radio sta-
tion being received.
Press DVD/FM/AM to select FM or AM.
1
Press PRESET + or – to select the desired
position number.
Press DVD/FM/AM select FM.
2
1
You can also select the desired position num-
ber using the number buttons (0–9), then press
ENTER.
Select a desired station by pressing the PRE-
SET + or –. When the RDS transmission is re-
ceived, the RDS indicator and the programme
service name (PS) appear on the display win-
dow.
2
• For example, to select the preset position
number 7, press 0 and 7, then press ENTER.
To select the preset position number 25, press
2 and 5, then press ENTER.
Notes:
• RDS is only available for FM reception.
• The PS (PROGRAM SERVICE) NAME is displayed auto-
matically when a RDS station is received.
Adjust the volume by rotating Volume knob on
the front panel or VOL +/– on the remote con-
trol.
3
37
2D20401A P32-BACK
37
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
Sleep timer
Mute
You can set the DVD receiver to turn off automati-
cally at a specified time.
Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears on the
display window.
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, “MUTE” indicator appears
on the display window.
Each time you press SLEEP, the setting changes
in the following order.
Using headphone socket
SLEEP
Connect a stereo headphone plug (ø 3.5mm) into
the HEADPHONE socket on the front panel.
The speakers are automatically disconnected
when you plug in the headphones (not supplied).
120 110 100 ... 30 20 10 0(off)
Note:
When you use the headphones, keep the volume at a
moderate level. If you use the headphones continuously
with high volume sound, it may cause hearing damage.
Notes:
• After the sleep timer is programmed, the remaining
timer appears briefly every ten minutes on the display
window.
• To confirm the sleep timer setting, press SLEEP.
• The remaining time appears on the display window.
Selecting input source
You can use VCRs or other units connected to the
LINE IN 1 or LINE IN 2 connectors.
Press INPUT SELECT repeatedly on the remote
control to select the desired input source.
Dimmer
This function will change the brightness of the
display window and the control buttons on the
front panel during Power-on status.
Press the DIMMER to dim the display window.
To cancel the Dimmer function, press DIMMER
again.
Press and hold DIMMER for 3 seconds to dim the
control buttons.
To cancel the Dimmer function, press and hold
DIMMER for 3 seconds again.
Note:
The Optical/Coaxial input function is available only when
the other unit’s Sampling Frequency is as follows.
PCM:
Dolby Digital:
DTS:
32KHz, 44.1KHz, 48KHz
48KHz
44.1KHz, 48KHz
Depending on the setting or the combination of the other
unit, the sound may not be played correctly.
Screen saver
The screen saver operates when you leave the
unit in DVD stop mode for about five minutes.
38
2D20401A P32-BACK
38
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before calling service personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Correction
Page
No power.
The mains lead is disconnected.
Connect the mains lead securely into the
wall outlet.
–
No picture.
The TV is not set to receive DVD signal
output.
Select the appropriate video input mode
on the TV so the picture from the unit
appears on the TV screen.
12
The scart or video lead is not connected
securely.
Connect the scart or video lead securely
into the appropriate socket.
12,13
The operation mode is not correct.
Select the correct operating mode.
25,36
12
The VIDEO OUTPUT selector is not set
correctly.
Set the VIDEO OUTPUT selector to the
appropriate position.
The INPUT SELECT is not set correctly.
Set the INPUT SELECT to the appropriate
position.
38
No sound.
The scart or audio lead is not connected
securely.
Connect the scart or audio lead securely
into the appropriate sockets.
12,13
The unit is in the special playback mode.
The operation mode is not correct.
Resume the normal playback.
26
Select the correct operating mode.
Connect the speaker lead or wires correctly.
25,36
The speaker connections are not set
correctly.
14
The volume is set to minimum.
The disc is dirty.
Adjust the volume level.
25
5
The playback picture has
occasional distortion.
Eject the disc and clean it.
It is in fast forward or fast reverse playback.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
–
The DVD video player does
not start playback.
No disc is inserted.
Insert a disc.
25
6
An unplayable disc is inserted.
Insert a playable disc. (Check the disc type
and colour system.)
The disc is placed upside down.
Place the disc with the playback side
down.
25
The disc is not placed within the guide.
Place the disc correctly inside the guide
on the disc tray.
25
5
The disc is dirty.
Eject the disc and clean it.
The parental lock function is set.
Cancel the parental lock function or
change the parental lock level.
23
appears on the screen.
The function is prohibited with the unit or
the disc.
6
–
Playback does not follow the
It is in the mode of repeat playback,
course of the disc’s programme. programme playback, etc.
These operations may prevent a proper
progress of the contents.
Buttons do not work.
Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
Turn the power on or off with ON/
STANDBY. Or disconnect the power plug
and insert it into the wall outlet again.
–
The remote control does not
work properly.
The remote control is not pointed at the
remote sensor of the unit.
Point the remote control at the remote
sensor of the unit.
11
11
11
The remote control is too far from the unit.
Operate the remote control within about 7 m.
Replace the batteries with new ones.
The batteries in the remote control are
exhausted.
Contact for technical assistance
If you are still having problem, please contact the Toshiba helpline on 0115 976 6958.
39
2D20401A P32-BACK
39
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power supply
Power consumption
Weight
230 V~AC 50 Hz
Operation: 20 W, Stand by: 4 W
3.5 kg
Dimensions
Tuner
Width: 430 mm, Height: 61.5 mm, Depth: 290 mm
FM (STEREO), AM (MONO)
FM 87.5~108.0 MHz, AM 522~1611 KHz
Channel 3 or 4, Switchable
PAL, NTSC
RF channel output
Colour system
Applicable disc
Frequency range
S/N ratio
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz
90dB
Harmonic distortion
Wow and flutter
Operating conditions
0.3%
Less than 0.01% Wrms
Temperature: 5˚C-40˚C, Operating status: Horizontal
Input/Output
Video input
1.0 V (p-p), 75 Ω, negative sync., phono socket x 2
1.0 V (p-p), 75 Ω, negative sync., phono socket x 1
–8 dBm, 50 kΩ, negative sync., phono socket (L/R) x 2
–8 dBm, 1 kΩ, negative sync., phono socket (L/R) x 1
Video output
Audio input
Audio output
S-video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., phono socket × 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, phono socket × 2
Audio input
0.5 V (p-p), 75 Ω, phono socket × 1
(BITSTREAM/PCM COAXIAL)
Audio input
(BITSTREAM/PCM OPTICAL)
Optical connector × 1
Audio output (6-Channel)
DIN 9-pin × 1
Speakers
Dimensions/Weight
Satellite: 110mm (W) 115mm (H) 69mm (D)/0.525kg
Centre: 206 mm (W) 110 mm (H) 100 mm (D)/1.07kg
Subwoofer: 210 mm (W) 348 mm (H) 225 mm (D)/5.81kg
Amplifier power
Front: 25 W + 25 W (3 Ω less than 0.1% distortion)
Centre: 30 W (2.3 Ω less than 0.1% distortion)
Surround: 25 W + 25 W (3 Ω less than 0.1% distortion)
Subwoofer: 33 W (2.2 Ω less than 0.1% distortion)
Impedance
Centre: 2.3
Ω
, Front/Surround: 3
Ω
, Subwoofer: 2.2
Ω
Power requirements
230V~AC 50Hz, 60W
Supplied accessories
Audio/Video lead................................................... 1
S-Video lead ......................................................... 1
Scart lead ............................................................. 1
AM loop aerial....................................................... 1
FM aerial wire ....................................................... 1
Remote control (SE-R0117) ................................. 1
Batteries (AAA) ..................................................... 2
Speakers............................................................... 6
Subwoofer lead ..................................................... 1
Speaker lead (3 pin, 6m) ...................................... 1
Speaker lead (2 pin, 15m) .................................... 1
Screws .................................................................. 6
Prevention rubbers ............................................. 25
• Designs and specifications are subject to change without notice.
*J2D20401A*
03/10
U
2D20401A P32-BACK
40
26/9/03, 6:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|