Kicker Stereo Amplifier SX4002 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
VFD DISPLAY - cont  
KEYPAD  
ISIS  
VFD Display  
GAIN - Indicates you are in the gain menu.  
EQ - Indicates you are in the equalizer menu.  
LPF - Indicates you are in the low pass filter menu.  
HPF - Indicates you are in the high pass filter menu.  
PHASE - Indicates you are in the phase menu.  
KOMP - Indicates you are in the Kompressor menu.  
MEM-1 - Memory preset 1 activated.  
The keypad consists of nine buttons that allow you to adjust  
your amplifier.  
Meet the ISISinterface (Indicate Status & Input Settings).  
The ISIS(pronounced eye-sis) allows you to view the cur-  
rent conditions and settings of your amplifier as well as  
change the many user-adjustable settings.The ISISsystem  
consists of the VFD (Vacuum Fluorescent Display) and the nine  
soft touch buttons that make up the KEYPAD.  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
M1 - Used to select memory preset 1 or to store cur-  
rent settings into preset 1.  
M1  
* kicker *  
MEM-1  
MEM-2  
MEM-3  
MEM-4  
M2 - Used to select memory preset 2 or to store  
current settings into preset 2.  
M2  
Here is a brief description of the indicators found on the  
VFD.  
AMP1 - Indicates amplifier 1 is selected for adjustment. Only  
M3 - Used to select memory preset 3 or to store  
current settings into preset 3.  
M3  
ISIS  
VFD  
AMP1  
AMP2  
available in four channel amps.  
M4 - Used to select memory preset 4 or to store  
current settings into preset 4.  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
M4  
MEM-2 - Memory preset 1 activated.  
AMP2 - Indicates amplifier 2 is selected for adjustment.  
Only available in four channel amps.  
* kicker *  
MEM-1  
MEM-2  
MEM-3  
MEM-4  
ESC  
ESC - Used to exit the current menu.  
MEM-3 - Memory preset 1 activated.  
LOCK - Indicates the amplifier controls are locked out and  
not usable.  
ENT - Used to enter the selected menu.  
ENT  
MEM-4 - Memory preset 1 activated.  
HOME - Used to return to the Main menu and  
other functions explained later.  
HOME  
ISIS  
KEYPAD  
LEFT - Indicates an action or adjustment of the left channel.  
SYS - Indicates you are in the system menu.  
M1 M2 M3 M4  
UP - Used to advance up through menu selections  
and/or adjust amplifier controls.  
RIGHT - Indicates an action or adjustment of the right  
ESC  
ENT  
HOME  
channel.  
DOWN - Used to advance down through menu  
selections and/or adjust amplifier controls.  
MUTE - Indicates you are in the mute menu or the mute  
function is active.  
These controls and their usage will be explained later with  
more detail in each menu usage section.  
4
5
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove  
Remove  
Custom-machined power block accepts up to a 2 Ga wire  
for both power and ground connections and up to an 8 Ga for  
remote turn-on assures maximum power transfer with  
minimal loss.  
End Panel Views  
Mounting  
The BLAST Port is used to connect the Remote Bass Level  
Controller and for transferring control signals from one SX  
amplifier to another SX amplifier. An RJ45 cable is required to  
connect the BLAST Port (Out) of one amp to the BLAST Port  
(In) of another. This is only required if you want to control  
more than one amplifier with the same Bass Level Controller.  
More details on this further in the manual.  
When selecting a location to mount your Kicker amplifier be  
sure it is structurally sound and that there are no items  
behind the area that could be damaged by the screws. Check  
for wiring, brake lines, fuel lines, gas tanks, etc.  
R
On-board fusing (number of fuses vary by amp size) to  
protect amplifier against over current conditions and reverse  
polarity.  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
* kicker *  
MEM-4  
MEM-1  
MEM-2  
MEM-3  
All amplifiers generate heat under normal operation. Be sure  
to choose a location that allows adequate ventilation for the  
amplifier. Also consider that the air temperature inside an  
automobile’s trunk can reach upwards of 140 degrees fahren-  
heit. An amplifier mounted in the trunk may require additional  
cooling such as extra fans moving air around the amplifier’s  
chassis or ventilating the trunk to exchange the hot air in the  
trunk for cooler air outside. If possible, mounting the amp in  
the passenger compartment will allow cooler operation.  
M1 M2 M3 M4  
Power LED indicates amplifier is powered up and operating.  
ESC  
HOME  
ENT  
The speaker terminals are custom-machined connectors  
with full protective shrouds and are designed to accept heavy  
gauge speaker wire assures maximum power transfer and  
damping with minimal power loss.  
Check Fuse LED indicates a fault with the end panel fuses.  
This could be fuses which are not seated properly, faulty fuses  
or blown fuses.  
Fig. 1  
Remove  
Remove  
Power LED  
Check Fuse LED  
Fusing  
Gold-plated RCA input connectors and PAST jacks provide  
solid input and output connections for your pre-amp signal.  
With the EndKaps removed, you now have access to the  
four mounting holes in the mounting feet and all wiring  
connections. Drill 4 holes using a 7/64” drill bit and use the  
supplied #8 screws to mount the amplifier.  
See Fig. 2  
Remember that the controls on top of the amp will need to  
be accessible for adjustment later. Keep this in mind as you  
choose your amplifier’s mounting location.  
BLAST Port In  
BLAST Port Out  
Now that you are ready to mount your amplifier, use the  
supplied 3mm allen wrench to remove the amplifier EndKaps.  
This will give you access to the mounting holes in the amplifi-  
er and all wiring connections.  
R
Ground  
Remote  
+ 12 Volt  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
See Fig. 1  
* kicker *  
MEM-4  
MEM-1  
MEM-2  
MEM-3  
M1 M2 M3 M4  
Left +  
Left -  
Left PAST  
Right PAST  
Right Input  
Left Input  
ESC  
HOME  
ENT  
Right +  
Right -  
Fig. 2  
6
7
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The ground should be connected to the amplifier first  
before making any of the other connections. This wire should  
be as short as possible (24 inches or less) and connected to a  
paint/corrosion free solid metal area of the car’s chassis. Use  
the same gauge wire as recommended for the amplifier’s  
power connection to the battery. Adding an additional ground  
wire between the car battery’s negative post and the car chas-  
sis of this same gauge (or larger) is also recommended.  
System Diagrams  
Wiring  
TWO CHANNEL OPERATION (STEREO)  
Signal is input into the amplifier using the low level RCA  
input connections. If your source unit does not have RCA  
output connectors you will need to use a Hi-Lo level signal  
adapter. See your Kicker dealer for more details on this.  
SX.2 series amplifiers are capable of operating into a minimum impedance of 2 ohms per  
channel in stereo operation.  
GROUND  
SIGNAL IN  
RIGHT SPEAKER(S)  
The output (PAST) RCA jacks provide an unaltered signal  
output to feed another amplifier or component.  
SIGNAL OUT  
If you ever need to remove the amp from the vehicle after  
it has been installed, the ground wire should be the last wire  
disconnected from the amplifier, just the opposite of when  
you installed it.  
_
+
R
REMOTE  
TURN-ON  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
R-  
* kicker *  
MEM-4  
18"  
MEM-1  
MEM-2  
MEM-3  
or less  
SOURCE UNIT  
R+  
L-  
M1 M2 M3 M4  
+12V  
A fuse must be installed within 18 inches of the battery to  
protect the power wire feeding your amplifier. This fuse  
should be of at least the same value used in the amplifier but  
no higher than the capacity of the power wire. See the charts  
below for wire size and fusing recommendations.  
FUSE  
_
+
ESC  
HOME  
ENT  
L+  
BATTERY  
LEFT SPEAKER(S)  
Model  
Fuse Size  
Wire Size  
BRIDGED OPERATION (MONO)  
SX400.2  
SX500.2  
SX600.2  
SX900.2  
50A  
60A  
80A  
120A  
4 GA  
4 GA  
4 GA  
2 GA  
SX.2 series amplifiers are capable of operating into a minimum impedance of 4 ohms  
when in bridged operation.  
GROUND  
SIGNAL IN  
The use of twisted pair interconnects is recommended for  
all installations to minimize noise. When routing these cables  
through the automobile, try to keep them away from factory  
wiring harnesses and other power wiring. If you need to cross  
any of this wiring do so at a 90 degree angle to reduce the  
possibility for noise problems.  
Wire Size  
Length  
Maximum Fuse  
SIGNAL OUT  
MONO  
SPEAKER(S)  
8 Ga  
70 Amps  
175 Amps  
250 Amps  
400 Amps  
40 Amps  
90 Amps  
150 Amps  
200 Amps  
Less than  
10 feet in  
length  
R
REMOTE  
TURN-ON  
4Ga  
2 Ga  
0Ga  
_
+
AMP1  
AMP2  
R-  
L+  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
* kicker *  
MEM-4  
18"  
MEM-1  
MEM-2  
MEM-3  
or less  
8 Ga  
4 Ga  
2 Ga  
0 Ga  
10 feet to  
20 feet in  
length  
M1 M2 M3 M4  
+12V  
FUSE  
ESC  
HOME  
ENT  
When working with power connections it is always recom-  
mended that you disconnect the battery to prevent accidents.  
BATTERY  
8
9
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEREO AND MONO SIMULTANEOUSLY (SAMS)  
USING THE SIGNAL OUTPUT JACKS (PAST)  
SX.2 series amplifiers are capable of operating into a minimum impedance of 4 ohms  
mono and 2 ohms stereo simultaneously with the use of passive crossovers.  
The Output (Pre Amp Signal Transfer) RCA jacks allow you to  
send the incoming signal from one Kicker SX series amplifier  
to another amplifier or processor without the need for Y  
cables. The signal from the PAST jacks is identical to the signal  
fed to the amplifier via its RCA input jacks and is not affected  
by any of the amplifier’s built-in digital signal processing.  
SOURCE UNIT  
GROUND  
SIGNAL IN  
RIGHT SPEAKER(S)  
SIGNAL OUT  
_
_
+
HIGH PASS  
CROSSOVER  
R
REMOTE  
TURN-ON  
+
Most head units with high voltage outputs should be capa-  
ble of driving up to ten amplifiers in a chain.  
AMP1  
AMP2  
LOCK LEFT S RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
R-  
* kicker *  
MEM-4  
18"  
MEM-1  
MEM-2  
MEM-3  
or less  
R+  
L-  
M1 M2 M3 M4  
+12V  
FUSE  
_
+
ESC  
HOME  
ENT  
L+  
MONO  
SPEAKER  
BATTERY  
HIGH PASS  
CROSSOVER  
LOW  
PASS  
CROSS-  
OVER  
LEFT SPEAKER(S)  
These are just a few of the many ways you can use your SX.2 series Kicker amplifier.  
These system diagrams are designed to give you a basic understanding of the most com-  
mon uses for this amplifier. For more complex systems please visit your local authorized  
Kicker dealer. You can also download the SX Technical Manual from our website at  
To Next Amplifier or Processor  
10  
11  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE BASS LEVEL CONTROL & BLAST  
As you can see there can be an infinite number of menu  
levels and each one of these menu levels can have an infinite  
number of its own items.  
BACK VIEW  
SIDE VIEW  
Mounting Surface  
Navigation  
You can use the Remote Bass Level Control to control the  
output of your amplifier from the front of the car.  
Your KICKER SX series amplifier uses the latest in Digital DSP  
control and provides you with valuable operational informa-  
tion about your amplifier, real-time diagnostics and a full  
multi-level menu-driven operating system to access and  
adjust your amplifier.  
Navigating this simple menu  
ESC  
HOME  
ENT  
Mount the controller by simply screwing the metal bracket  
to the chosen location and then slide the housing onto the  
bracket until it snaps into place.  
structure is very easy using the 5-way  
keypad.  
SUPPLIED  
CABLE  
You use the UP and DOWN keys to scroll through the  
available menu items, and the ENT key is used to select that  
menu item. The ESC key backs you up one menu level from  
where you are, and the HOME key can returns you all the  
way to MAIN MENU by pressing and holding it for 1.5 seconds.  
Route the cable from the controller to the BLAST input jack  
on the amplifier chassis. That’s it.  
The menu system is designed in layers. There is a starting  
point and you keep drilling down until you get to the menu  
item you want to view or change. This menu tree is an exam-  
ple of how the SX menu structure is set up.  
SOURCE UNIT  
If you wish to control more than one amplifier with your  
remote, you will simply need to use a RJ45 cable (not supplied  
but available at any Radio Shack, computer store or electronics  
center) to connect the BLAST output jack of the first amp to  
the BLAST input jack of the next amplifier.  
NOTE: Not all the menus and menu items are shown below.  
DEFAULT  
SCREEN  
For example let’s begin at the DEFAULT SCREEN; our goal is  
to get to the HISTORY menu. Pressing the ENT key would get  
us to MAIN MENU. Now use the UP and  
DOWN keys to scroll to SYSTEM, and  
then press the ENT key. Now you are  
MAIN MENU  
SYSTEM  
*
GAIN  
in the SYSTEM MENU. Using the UP and  
DOWN keys again you scroll to SICK  
BAY and press the ENT key. You are  
now in the SICK  
SYSTEM MENU  
ESC  
HOME  
ENT  
OPTIONAL  
RJ45 CABLE  
EQ  
VOLT NOW  
LO-PASS  
VOLT MIN  
HI-PASS  
VOLT MAX  
TEMP NOW  
TEMP MAX  
RUN TIME  
SICK BAY  
BAY MENU. Use the UP and DOWN  
keys again to scroll to HISTORY and then  
press the ENT key. That’s it! You are  
there.  
ESC  
HOME  
ENT  
OPTIONAL  
RJ45 CABLE  
SICK BAY MENU  
This is how you view information  
and change settings in your KICKER SX amplifier.  
CURRENT  
HISTORY  
To Next Amplifier or Processor  
12  
13  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continuing our example, we are now in the HISTORY item in  
the SICK BAY MENU. If we press the ESC key we would go  
back up to the SICK BAY MENU. If we  
Pressing the key and holding it in for  
longer than 1.5 seconds will activate the  
accelerated scrolling mode and scroll  
through the menu items at a much  
faster rate. Releasing the key will return  
it to normal speed mode.  
If you want the display to continue scrolling simply press  
the HOME key again.  
PRESS &  
HOLD  
Menu System  
The menu system layout is as follows:  
press the ESC key again we would go  
MAIN - This menu is the first menu accessed from the  
DEFAULT menu and is the gateway to all the settings and  
information on your SX series amplifier.  
ESC  
HOME  
ENT  
DEFAULT - This menu is displayed when your amp is  
operating and no adjustments are being made to your ampli-  
fier. This information scrolls through the display one after the  
other and then repeats.  
to the SYSTEM MENU. One more press  
of the ESC key and we are in the  
ESC  
HOME  
ENT  
MAIN MENU.  
Don’t try to scroll through every 1/12 octave step without  
To enter the MAIN menu simply press  
Let’s start at the HISTORY item in the SICK BAY MENU again  
but instead press and hold the HOME key for 1.5  
seconds. Doing this will take us all the way back to the MAIN  
it!  
the ENT key while in the DEFAULT  
menu.  
ESC  
HOME  
ENT  
1.) KICKER- Hey, we needed a brand plug for us since this  
amp is sooooo cool!  
MENU in one key press. Pressing and  
holding the HOME key will return you  
all the way back to the MENU ITEM you  
started with in the MAIN MENU, no mat-  
ter how deep in the menu level struc-  
ture you are. Pretty cool!  
PRESS &  
HOLD  
2.) XX.X Volts- Displays the current voltage at the  
amplifier’s + 12 volt battery input terminal.  
The available selections in the MAIN menu are:  
ESC  
HOME  
ENT  
System  
GAIN  
EQ  
3.) XX.X DEG f or xx.x DEG c- Displays the current  
temperature of the amplifier in celsius or fahrenheit.  
Lo-Pass  
Hi-Pass  
Phase  
4.) amp name- Model name of the amplifier or the name  
you have changed it to.  
This is a very quick way to return to the MAIN MENU after  
drilling down several menu layers to view or change an item.  
Mute  
Kompressor  
Security  
5.) memory name- Current memory preset in use (if  
any) or the name you have changed it to.  
When adjusting any amplifier control the UP and DOWN  
arrow keys have 2 speeds, normal and accelerated.  
If you want to freeze the scrolling  
display simply press the HOME key  
and the scrolling will stop.  
Use the UP and DOWN arrow keys  
to scroll through the available selections  
PRESS &  
ESC  
HOME  
ENT  
Pressing and releasing the key  
RELEASE  
ESC  
HOME  
ENT  
repeatedly will scroll through the menu  
items at normal speed.  
in the MAIN menu.  
ESC  
HOME  
ENT  
When you have the menu item  
selected that you want to view or adjust  
simply press the ENT key to select it.  
Now you can manually select the item  
you wish to have displayed by using the  
UP or DOWN keys.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
14  
15  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SICK BAY - cont  
8.) Amp Name- Here you can assign a unique name to  
your KICKER SX amplifier. This name will replace the model  
name in the DEFAULT screen. If you change your mind and  
do not want to change the name, press and hold the  
HOME key for 1.5 seconds BEFORE making any changes.  
SYSTEMMENU -This menu item contains many diagnostic  
tools and first time setup options. Use the UP and DOWN  
arrow keys to scroll through the options and press ENT to  
select. Press the ESC key to return to the SYSTEM menu.  
7a.) CURRENTshows amplifiers current status or fault  
code. The 6 possible codes are:  
7c.) PINK NOISEis a built in pink noise generator  
to test operation of the amplifier  
normal- No problem, normal operation.  
thermal- Thermal cutoff protection engaged.  
short- Short circuit protection engaged.  
Hi-Volt- High voltage protection engaged.  
FUSE- Faulty or blown power fuse.  
Use the UP and DOWN  
keys to select NOISE ONor  
NOISE OFf.  
1.) Volt Now- Displays the current voltage at the  
amplifiers +12 volt terminal.  
The ESC and ENT keys move  
ESC  
HOME  
ENT  
the cursor left or right to select  
which character to change.  
2.) Volt Min- Displays the lowest voltage seen at the  
amplifiers +12 volt terminal since being installed.  
SERVICE- Amp requires service by KICKER.  
ESC  
HOME  
ENT  
When the PINK NOISE is ON  
the LEFTand RIGHTindicators  
in the ISISVFD will blink on  
and off.  
When you are done viewing  
the current status press the  
ESC key to return to the SICK  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
3.) Volt Max- Displays the highest voltage at the  
amplifiers +12 volt terminal since being installed.  
ESC  
HOME  
ENT  
noise on  
MEM-4  
MEM-1  
MEM-2  
MEM-3  
BAY menu.  
Use the UP and DOWN keys to  
change the character displayed  
(A, B, C...1, 2, 3...etc)  
4.) Temp Now- Displays the current temperature of  
the amplifier.  
7b. )HISTORYlogs the last 5 fault codes and how  
long ago they happened when  
compared to the RUN TIME log.  
ESC  
HOME  
ENT  
When you are done using the  
PINK NOISE generator press the  
ESC key to return to the SICK  
BAY menu.  
5.) Temp Max- Displays the highest temperature the  
amplifier has reached since being installed.  
ESC  
HOME  
ENT  
Use the UP and DOWN  
PRESS &  
HOLD  
ESC  
HOME  
ENT  
When you are finished press and  
hold the HOME key for 1.5  
seconds to save your new  
amplifier name.  
6.) Run Time- Displays the total time the amplifier  
has been powered up since installation in 1/10th of  
an hour increments  
keys to select the HISTORY log  
entry you want to view.  
NOTE...  
ESC  
HOME  
If you exit the SICK BAY menu with the PINK NOISE generator  
still on, the LEFTand RIGHT ISISVFD indicators will remain  
blinking as a reminder.  
ENT  
7.) Sick Bay- Contains several  
Press and hold the ENT key  
to view the time it happened.  
ESC  
HOME  
ENT  
diagnostic tools. Once in this menu  
you use the UP and DOWN keys to  
scroll through CURRENT, HISTORYand  
PINK NOISEoptions. Press the ENT  
When you are done viewing  
ESC  
HOME  
ENT  
key to select.  
the history press the ESC key.  
ESC  
HOME  
ENT  
16  
17  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.) Mem Name- Here you can change the names of the  
memory locations. The factory defaults are  
14.) Display- Several options to allow customizing  
the amplifier’s VFD display.  
15.) Lock Code- Set your own lock code! The factory  
default is 123but you can change it and create your own  
code with up to 10 characters.  
10.) Remote Adr- This feature is currently not used but is  
reserved for future expansion.  
Memory-1  
Memory-2  
Memory-3  
14a.) BRIGHTNESS- Adjust the intensity level of  
the ISISVFD display. Five selectable levels.  
11.) Gain Range- Sets the input voltage window of the  
UltraMatch gain control. Possible choices are:  
1V, 2V, 4V, 8V, 16V  
Select the one closest to the maximum RCA input voltage  
you expect to send to the amplifier.  
The ESC and ENT keys move the  
cursor left or right to select which  
character to change.  
MINIMUM- dimmest setting.  
LOW  
MEDIUM  
HIGH  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
Memory-4  
Use the UP and DOWN keys to select the memory  
location name you want to change and then press the  
MAXIMUM- brightest setting.  
Use the UP and DOWN keys to  
select your voltage. Press the ESC to  
return to the MAIN menu.  
ENT key to select it.If you change your mind and do not  
want to change the name, press and hold the HOME key  
for 1.5 seconds BEFORE making any changes.  
Use the UP and DOWN keys to  
change the character displayed  
(A, B, C...1, 2, 3...etc)  
14b.) TEMP C/F- Selects between Celsius (CELSIUS)  
or Fahrenheit (FAHRENHEIT) for temperature  
readouts.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
12.) Bypass DSP- Bypasses all DSP  
The ESC and ENT keys move the  
cursor left or right to select which char-  
acter to change.  
processing and sends the input signal directly to the  
amplifier.  
14c.) HOLD TIME- Adjusts the speed of the scroll  
in the Default Screen display. Determines how long  
each menu item stays in the display before scrolling  
to the next item. Adjustable from 1 - 11 seconds.  
PRESS &  
HOLD  
When you are finished press and  
hold the HOME key for 1.5 seconds  
to save your new amplifier lock code.  
IMPORTANT!!! Be sure to write this  
code down for future reference.  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
select BYPASS ONor BYPASS OFF.  
Press the ESC key to return to  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
change the character displayed  
(A, B, C...1, 2, 3...etc)  
14d.) SCRNSAVER- Option to turn on or off the  
screensaver. When on (AUTO) the display will go to  
sleep when there is no button activity for 60 seconds.  
Pressing any button once will wake up the display.  
The OFFselection turns off the screensaver and the  
display is always on.  
the MAIN menu.  
13.) Komp Adj.- This adjusts the KOMPRESSOR  
ESC  
HOME  
ENT  
activation threshold. Range is +24 dB to -24 dB to allow for  
different sized speakers or listener tastes. 0 is the  
default factory setting.  
PRESS &  
HOLD  
When you are finished press and hold  
the HOME key for 1.5 seconds to save  
your new memory name.  
Use the UP and DOWN keys to  
select your setting and then press the  
ESC to return to the MAIN menu.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
Repeat the above steps to rename the other presets.  
18  
19  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16.) Reset Amp- This option resets all adjustable  
settings back to their original factory defaults.  
BOOST/CUTis how much you want to boost or cut the  
equalizer and has a range of -18 dBto + 18 dBin .5 dB  
steps.  
Now use the UP and DOWN keys  
to increase or decrease the gain of  
the selected channel(s) in .5 dB  
increments from 0 dB to +12 dB.  
(.0to 12.0)  
EQMENU - Here you can adjust the single band parametric  
equalizer. Your options are frequency, bandwidth and  
boost/cut.  
Use the UP and DOWN keys to  
select SKIP RESETor DO RESET and  
then press the ENT key to perform  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
adjust each setting and the ESC  
key to return to the EQ menu.  
Press the ENT key to enter the  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
EQ menu.  
the selected action.  
Press the ESC key to return to the  
LEFT, RIGHT, BOTH options menu.  
You can now adjust another channel  
on this amplifier.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
choose one and press the ENT key  
to select it.  
17.) About- This menu item will display information  
about the DAP (Digital Audio Processor) hardware, software  
and build date.  
When you are done adjusting the  
EQ press the ESC key while in the  
EQ menu to return to the MAIN  
menu.  
ESC  
HOME  
ENT  
When you are done adjusting the  
gain press the ESC key while in the  
GAIN menu to return to the MAIN  
menu.  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
view the DSP Version, Software Version,  
Hardware Version and Build Date. Press  
the ESC key to return to the MAIN  
FREQUENCYselects the center frequency of the EQ and can  
be set at any 1/12th octave frequency from 20 Hz - 20 kHz.  
(20Hz to 20325Hz)  
ESC  
HOME  
ENT  
NOTE...  
ESC  
HOME  
ENT  
menu.  
While adjusting the EQ you will notice the EQ indicator on  
the ISIS VFD display is lit. This indicates you are in the EQ  
menu.  
Use the UP and DOWN keys to  
select your frequency. Press the  
ESC to return to the EQ menu.  
NOTE...  
GainMENU - Here is where you adjust your amplifier’s gain  
ESC  
HOME  
ENT  
While adjusting the GAIN you will notice the gain indicator  
on the ISIS VFD display is lit. This indicates you are in the  
GAIN menu.  
control settings.  
BANDWIDTH(better known as Q) can be set from .5to 10in  
.5 increments. In simple terms, lower Q effects more  
frequencies around the center frequency while higher Q  
effects fewer frequencies around the center frequency.  
Press the ENT key to enter the  
ESC  
HOME  
ENT  
GAIN menu.  
The LEFT and/or RIGHTindicator will light up to indicate  
which amplifier channel(s) you are currently adjusting.  
Use the UP and DOWN keys to  
scroll through LEFTchannel, RIGHT  
channel or BOTH options and then  
press the ENT key to select.  
Use the UP and DOWN keys to  
select your Q value. Press the ESC  
to return to the EQ menu.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
20  
21  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When you are done adjusting the  
EQ press the ESC key while in the  
EQ menu to return to the MAIN  
menu.  
hi-passMENU - Here is where you adjust the high pass  
crossover.  
Lo-PassMENU - Here is where you adjust the low pass  
crossover.  
When you are done adjusting the  
EQ press the ESC key while in the  
EQ menu to return to the MAIN  
menu.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
Press the ENT key to enter the  
Press the ENT key to enter the  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
HI-PASS menu.  
LO-PASS menu.  
NOTE...  
While adjusting the HI-PASS crossover you will notice the  
hpfindicator on the ISIS VFD display is lit. This indicates  
you are in the HI-PASS crossover menu.  
NOTE...  
While adjusting the LO-PASS crossover you will notice the  
LPFindicator on the ISIS VFD display is lit. This indicates  
you are in the LO-PASS crossover menu.  
Use the UP and DOWN keys to  
scroll through frequencyand slope  
and press the ENT to select the one  
you want to adjust.  
Use the UP and DOWN keys to  
scroll through frequencyand  
slop[e.Press the ENT to select the  
one you want to adjust.  
ESC  
HOME  
ENT  
The KICKER SX amplifier monitors and prevents any high  
pass crossover point from being any closer than 1/3 octave  
from the low pass crossover point. If you cannot set the high  
pass crossover where you want then check the LPFindicator  
and see if it is flashing. If it is then you need to go to the  
LO-PASS menu and lower the low pass crossover point.  
ESC  
HOME  
ENT  
The KICKER SX amplifier monitors and prevents any low pass  
crossover point from being any closer than 1/3 octave from  
the high pass crossover point. If you cannot set the low pass  
crossover where you want then check the HPFindicator and  
see if it is flashing. If it is then you need to go to the HI-PASS  
menu and raise the high pass crossover point.  
FREQUENCYselects the crossover point and can be set at any  
1/12th octave frequency from 10 Hz to 16 kHz.  
(10 Hzto 16132 Hz)  
FREQUENCYselects the crossover point and can be set at any  
1/12th octave frequency from 30 Hz to 20 kHz.  
(30Hzto 20325Hz)  
This is done as a safety precaution to prevent a notch  
filter condition.  
Use the UP and DOWN keys to  
select your frequency. Press theESC  
key to return to the HI-PASS menu.  
Use the UP and DOWN keys to  
select your frequency. Press the  
ESC to return to the LO-PASS  
This is done as a safety precaution to prevent a notch filter  
condition.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
menu.  
SLOPEselects the rolloff of the crossover and can be set  
from OFFto 36 dBin 6 dB steps.  
SLOPEselects the rolloff of the crossover and can be set  
from oFFto 36dBin 6 dB steps.  
Use the UP and DOWN keys to  
select your slope. Press the ESC  
to return to the HI-PASS menu.  
Use the UP and DOWN keys to  
select your slope. Press the ESC to  
return to the LO-PASS menu.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
22  
23  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PhaseMENU - Here you can switch the polarity of each  
channel(s) output between 0 or 180  
degrees.  
MuteMENU - Here you can mute each channel(s) output for  
setup or testing purposes.  
MUTE MENU - cont.  
KompressorMENU - Here you can select which Kompressor  
setting you wish to use. The SX amplifier utilizes a full digital  
compressor circuit to tweak the amplifier and the sound to  
your unique needs.  
NOTE...  
Press the ENT key to enter the  
MUTE menu.  
While adjusting the MUTE you will notice the muteindica-  
tor on the ISIS VFD display is lit. This indicates you are in  
the MUTE menu.  
ESC  
HOME  
ESC  
HOME  
ENT  
ENT  
Press the ENT key to enter the  
PHASE menu.  
Press the ENT key to enter the  
KOMPRESSOR menu.  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
scroll through BOTH, LEFTand right.  
Press the ENT to select the one you  
want to adjust.  
Use the UP and DOWN keys to  
scroll through BOTH, LEFTand  
right. Press the ENT to select  
the one you want to adjust.  
There is also a LEFTand a RIGHTindicator that will light up  
to let you know which channel (Left and/or Right) that you are  
currently muting.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
scroll through tight, contour,  
attackand OFF.  
If you exit the MUTE menu with any channel(s) muted, the  
LEFTand/or RIGHTindicators will flash to indicate this.  
Use the UP and DOWN keys  
to select from 0 DEGREEor180  
DEGREE. Press the ESC key to  
make your selection and return to  
the PHASE menu.  
ESC  
HOME  
ENT  
Use the UP and DOWN keys  
to select from MUTE ON or mute off.  
ESC  
HOME  
ESC  
HOME  
ENT  
ENT  
Press the ESC key to accept your  
selection and return to the MAIN  
menu.  
ESC  
HOME  
ENT  
You can now select another channel  
to adjust or press the ESC key to  
return to the MAIN menu.  
Press the ESC key to make your  
selection and return to the MUTE  
menu.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
NOTE...  
While adjusting the Kompressor you will notice the KOMP  
indicator on the ISIS VFD display is lit. This indicates you  
are in the KOMPRESSOR menu.  
NOTE...  
While adjusting the PHASE you will notice the PHASE  
indicator on the ISIS VFD display is lit. This indicates you  
You can now select another channel  
to adjust or press the ESC key to  
return to the MAIN menu.  
are in the PHASE menu.  
See the specifications pages for a brief description of each  
Kompressor setting and some general guidelines for their use.  
ESC  
HOME  
ENT  
There is also a LEFTand a RIGHTindicator that will light up  
to let you know which channel (Left and/or Right) that you are  
currently adjusting.  
24  
25  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNLOCK AMPLIFIER - cont.  
You will need to call KICKER directly at (405) 624-8583 to  
handle this situation. You will need your amplifier’s serial  
number AND your receipt as the guys and gals answering the  
phone will need this information from you to help you out.  
UNLOCK AMPLIFIER  
SecurityMENU - Here you can lock down your amplifier to  
prevent any access to the settings. The DEFAULT screen is still  
active and you can select any of the four presets... but that is  
it!  
If you enter the wrong code the display will flash the mes-  
You do remember your lock code right? You better because  
that is now the only way in! If you have not changed it then it  
is still at the factory default of 123.  
sage BAD CODEand then return you to UNLOCKscreen.  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
So...before you call, gather this information up and have it  
ready to save us some time on the phone. Cool? Cool!  
Press the ENT key to enter the  
KOMPRESSOR menu.  
2 Times  
bad code  
To unlock your amplifier press the  
ENT key. The display will show  
UNLOCK. Press the ENT key again.  
You will now enter your code to  
unlock the amplifier.  
MEM-1  
MEM-2  
MEM-3  
MEM-4  
ESC  
HOME  
ENT  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
Better yet, take the time RIGHT NOW to fill out the first page  
in this manual and STAPLE your receipt to it. That way if or  
when you need service (like forgetting your lock code) you will  
have all the information you need right there in front of you.  
ESC  
HOME  
ENT  
Use the UP and DOWN keys to  
select LOCK IT UPor DON’T LOCK  
and then press the ENT key to  
accept your setting.  
unlock  
MEM-4  
MEM-1  
MEM-2  
MEM-3  
ESC  
HOME  
ENT  
Press the ENT key to enter your  
lock your code again.  
The ESC and ENT keys move the  
blinking cursor left or right to select  
which character to enter.  
ESC  
HOME  
ENT  
ESC  
HOME  
ENT  
If you selected LOCK IT UPthe display will now show  
UNLOCK.and the LOCK indicator will be on. The menus  
are now locked. Press the ESC key to return to the  
DEFAULT scrolling screen.  
Enter your code again making sure to place the correct  
character in the correct position in the display. Blank spaces  
count as part of the code so be sure you are entering it  
correctly.  
Use the UP and DOWN keys to  
enter the character.  
AMP1  
AMP2  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
ESC  
HOME  
ENT  
(A, B, C...1, 2, 3...etc)  
unlock  
MEM-4  
MEM-1  
MEM-2  
MEM-3  
Press the HOME key and try again. If you have found your  
error then the amp will unlock. If not, the flashing BAD CODE  
will greet you and you can try again.  
If you selected DON’T LOCKthen you will return to the  
MAIN menu and the amplifier will remain unlocked.  
When you are finished press and hold  
the HOME key for 1.5 seconds to  
enter your unlock code.  
ESC  
HOME  
ENT  
If you have tried several times (several is defined as more  
than 3...less than 10) and you still can not unlock your  
amplifier, this more than likely means means you have  
forgotten your lock code.  
NOTE...  
While your amplifier is in lock down you will notice the LOCK  
indicator on the ISIS VFD display is lit. This indicates your  
amplifier is locked down and will require a code to unlock it  
before any adjustments can be made.  
If the code is correct the amp will unlock and drop you back  
into the security menu. If not, then read on...  
26  
27  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In more general terms, each preset offers you these  
options.  
STORING A PRESET  
PRESET PRESETS  
Memory Presets  
There are four memory preset keys each with an  
indicator above it in the ISISVFD display. The indicator will  
illuminate if that  
Make all the adjustments you want to have stored in the  
preset and return to the DEFAULT screen.  
Ok, we know that sounds like a certain pizza commercial,  
but seriously the four memory presets come with settings  
already in them.  
Memory-1 sets the amplifier into full-range mode with a  
infrasonic filter (often called subsonic filter) to protect the  
speakers from harmful ultra-low frequencies.  
memory preset is  
To store your settings into a preset  
HOLD  
currently in use.  
simply press and hold the desired  
memory key until the VFD display flashes  
STORED. Then release the memory key.  
The indicator which matches the preset  
you used will illuminate.  
You can use these as a starting point to do your own tweak-  
ing or for quick push-a-button-and-be-done setup.  
AMP1  
AMP2  
Memory-2 sets the amplifier into low-pass operation with a  
infrasonic filter. For use when the amplifier is driving a sub-  
woofer.  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
M1  
M2  
M3  
M4  
Each preset stores  
all the values for  
each of the  
AMP1  
AMP2  
* kicker *  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
Any preset you store will replace the ones that come from  
the factory. You can reset all four preset back to factory  
defaults anytime simply by doing a reset in the RESET AMP  
menu.  
MEM-1  
MEM-2  
MEM-3  
MEM-4  
stored  
following amplifier  
controls:  
MEM-1  
MEM-2  
MEM-3  
MEM-4  
Memory-3 sets the amplifier into high-pass operation. Used  
for powering up a set of coaxial or component speakers when  
another amp is driving a subwoofer.  
RECALLING A PRESET  
PRESS &  
RELEASE  
PRESETS  
INDICATORS  
*.) GAIN  
To recall a memory preset simply press  
and release the key. The matching  
indicator will light up and the amplifier will  
change all the corresponding controls to  
the values assigned to the memory pre-  
set.  
Here are the settings in each preset from the factory.  
*.) EQ  
Memory-4 sets the amplifier up for mid-bass duty. Perfect  
for a set of KICKER mid-bass drivers.  
M1  
M2  
M3  
M4  
MEMORY-1 MEMORY-2 MEMORY-3 MEMORY-4  
*.) LO-PASS  
*.) HI-PASS  
*.) PHASE  
*.) MUTE  
AMP1  
AMP2  
GAIN LEVEL  
6 DB  
6 DB  
40 HZ  
FLAT  
3
6 DB  
40 HZ  
FLAT  
3
6 DB  
40 HZ  
FLAT  
3
M1 M2 M3 M4  
LOCK LEFT SYS RIGHT MUTE  
GAIN EQ LPF HPF PHASE KOMP  
EQ FREQUENCY 40 HZ  
As stated before you can always start with one of these pre-  
set, tweak it to fit your installation and then save your settings  
into a new preset.  
* kicker *  
MEM-4  
MEM-1  
MEM-2  
MEM-3  
EQ BOOST/CUT  
EQ BANDWIDTH  
FLAT  
3
ESC  
ENT  
HOME  
*.) KOMPRESSOR  
LO-PASS SLOPE OFF  
OFF  
24 DB  
84 HZ  
24 DB  
25 HZ  
24 DB  
177 HZ  
24 DB  
84 HZ  
This gives you the  
ability to dial in four  
completely different  
amplifier settings and store them in presets for instant recall  
later.  
LO-PASS FREQ  
HI-PASS SLOPE  
HI-PASS FREQ  
PHASE L&R CH.  
MUTE L&R CH.  
20325 HZ 20325 HZ  
12 DB  
25 HZ  
24 DB  
84 HZ  
0 DEGREE 0 DEGREE O DEGREE O DEGREE  
OFF  
OFF  
OFF  
OFF  
It’s like a preset for your favorite radio stations...only better!  
KOMPRESSOR  
KOMP ADJ.  
OFF  
OFF  
OFF  
OFF  
0 DB  
0 DB  
0 DB  
0 DB  
28  
29  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alternator noise (whining sound that varies with engine RPM):  
¬Check for damaged RCA cables.  
¬Check routing of RCA cable.  
¬Check source unit for good ground.  
¬Check GAIN RANGE in SYSTEM menu, turn down if set too  
high.  
¬Substitute known good source unit.  
Troubleshooting  
;If amp does not make noise using PINK NOISE then:  
If your amplifier does not appear to be working, check obvi-  
ous things first such as blown fuses, poor or incorrect wiring  
connections, crossovers set improperly, gain controls  
improperly set, etc.  
¬Check speaker connections.  
¬Test speaker outputs with known good speaker.  
Other Symptoms:  
¬Check GAIN in MAIN MENU, turn down if set too high.  
;Amp is very hot, no output.  
There are two LEDs on the end panel of your KICKER SX  
series amplifier, one green and one red. The green LED indi-  
cates the amplifier is turned on. The red LED indicates that  
there is a fault condition with the end panel fuses and they  
need checked.  
¬Thermal protection is engaged. Check SICK BAY to  
verify. Check for proper impedance at speaker  
terminals. Also check for adequate airflow around  
amplifier.  
CAUTION: When jump-starting the vehicle, be sure  
that connections made with jumper cables are cor-  
rect. Improper connections (+ to - & - to +) will  
result in blown amplifier fuses as well as failure to  
other systems in the vehicle.  
;Amp shuts down while vehicle is running.  
¬Over Voltage protection engaged. Check SICK BAY  
to verify. Voltage to the amplifier is not within the  
9-16 volt operating range. Have automobile  
charging/electrical system inspected.  
The power indicator on top of the amplifier which illumi-  
nates the model badge follows the same function as the  
green LED.  
If you have more questions about the installation and oper-  
ation of your new KICKER amplifier, see the Authorized KICKER  
Dealer in your area. You may also call our Technical Services  
Line at (405)624-8583 for assistance or visit our website at  
;Amp only plays at low volume levels.  
Green LED ooff, no output:  
¬With a Volt Ohm Meter (VOM) check:  
¬+ 12 volt power terminal (should read +12V to +16V).  
¬Remote turn-on terminal (should read +12V to +16V).  
¬Ground terminal to chassis ground (should read 0).  
¬Short circuit protection engaged. Check SICK BAY  
to verify. Check for speaker wires shorted to each  
other or the vehicle chassis. Damaged speakers or  
operating amplifier below minimum recommended  
impedance will also cause this.  
;Weak bass output.  
Green LED oon, no output:  
¬Change the phase of the LEFT channel in the PHASE  
menu. If bass improves then one speaker channel is  
out of phase (polarity). You can leave PHASE changed  
for this channel to fix the problem or better yet;  
Check speaker connections to amp and speakers to  
determine which one is wrong and correct. Be sure  
to set the PHASE of the LEFT channel back to original  
setting after correcting wiring connections.  
¬Check amp status in SICK BAY.  
¬Check GAIN RANGE in SYSTEM menu.  
¬Check GAIN LEVEL in GAIN menu.  
¬Check if MUTE is activated.  
¬Test amp using PINK NOISE in SICK BAY menu.  
;If amp makes noise using PINK NOISE then:  
¬Check RCA cable and connections.  
¬Check for signal on RCA cable with VOM in AC  
position.  
30  
31  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A few words on the Kompressor. The effect is most  
noticeable in the bass area of your music and the  
descriptions above apply to that area of your music  
(Bass/Midbass). You can use the Kompressor in any amplifier  
configuration (Low Pass, High Pass, Band Pass or Full Range)  
but we feel the best results are obtained when with the amp  
is in a Low Pass (subwoofer) or Band Pass (midbass) situation.  
Kompressor  
Performance  
Model  
SX400.2  
SX500.2  
SX600.2  
SX900.2  
Here is a brief explanation of each KOMPRESSOR setting.  
Contour- This preset applies expansion below the threshold  
point to provide a fuller sound at lower volume levels. Effect  
decreases at higher volume levels. Nice effect for someone  
wanting a fuller sound at low to moderate listening levels.  
RMS Power  
In Watts, All Channels Driven  
@ 13.8V, 4Stereo, 0.02% THD  
@ 13.8V, 2Stereo, 0.2% THD  
@ 13.8V, 4Mono, 0.4% THD  
88 x 2  
175 x 2  
350 x 1  
113 x 2  
225 x 2  
450 x 1  
138 x 2  
275 x 2  
550 x 1  
213 x 2  
425 x 2  
850 x 1  
A few exceptions to this rule are:  
ATTACK- This preset applies expansion above the threshold  
point to provide a nice quick punch or attack to the music.  
Effect increase with higher volume levels. Like music with a  
quick and punchy sound? Give this one a try.  
The red-linesetting is good for use in any configuration  
as it helps control dynamic peaks and limit distortion at  
higher output levels.  
Dynamic Power  
In Watts, All Channels Driven  
The contour setting is also another good all around use  
setting and when used in Full Range or High Pass  
configurations tends to enhance the vocal and top end of  
the music. Great for helping to cover up interior noise.  
Red-line- Provides a quick clamp to dynamic peaks while  
still allowing a full sound to come through. Effect increases  
at higher volume levels. Like to play it loud but want to  
protect your speakers? Want low level details to come  
through over road noise? Want a more even volume level to  
your music? All can be achieved with this preset.  
@ 14.4V, 4Stereo, 1% THD  
@ 14.4V, 2Stereo, 1% THD  
@ 14.4V, 4Mono, 1% THD  
100 x 2  
200 x 2  
400 x 1  
125 x 2  
250 x 2  
500 x 1  
150 x 2  
300 x 2  
600 x 1  
225 x 2  
450 x 2  
900 x 1  
Length With EndKaps  
16”  
(40.64cm)  
19.25”  
(48.90cm)  
22.5”  
(57.15cm)  
25.75”  
(65.41cm)  
The ATTACKsetting is really geared for bass and midbass  
duty.  
OFF- Pretty much says it all. This turns the KOMPRESSOR  
off. This is the factory default setting.  
Fusing  
25A x 2  
4 GA  
30A x 2  
4 GA  
40A x 2  
4 GA  
40A x 3  
2 GA  
The possibilities are almost endless! Tweak away!  
Recommended Power & Ground Wire  
After selecting your KOMPRESSOR setting you can adjust its  
effect using the KOMPRESSOR ADJUSTMENT (KOMP ADJ.)  
setting located in the SYSTEM menu. There you can change  
the threshold point for each of these settings to customize  
the KOMPRESSOR effect to fit your speakers, car or personal  
tastes.  
32  
33  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Height:  
2.5 inches / 6.35 centimeters  
10 inches / 25.4 centimeters  
Subtract 5 inches (12.7 cm) from chart above  
20 Hz - 20 kHz, +0 / -1 dB  
62.5 mV - 16 V  
WHAT IS NOT COVERED?  
ELECTRONICS LIMITED WARRANTY  
Width:  
This warranty is valid only if the product is used for the purpose for which it  
Kicker warrants this product to be free from defects in material and workman-  
ship under normal use for a period of 90 DAYS from date of original purchase  
with receipt. When purchased from an Authorized KICKER Dealer it is warranted  
for TWO (2) YEARS from date of original purchase with receipt. If the product  
is labeled “B Stock” it is warranted for 90 DDAYS from date of original purchase  
with receipt. If labeled “B SStock” and purchased from an Authorized KICKER  
Dealer, it is warranted for ONE ((1) YYEAR from date of purchase with receipt. In all  
cases you must have the original rreceipt! Should service be necessary under this  
warranty for any reason due to manufacturing defect or malfunction during the  
warranty period, Kicker will replace or repair (at its discretion) the defective mer-  
chandise with equivalent merchandise at no charge. Warranty replacements on  
“B-Stock” merchandise may have cosmetic scratches and blemishes.  
Discontinued products may be replaced with more current equivalent products.  
This warranty is valid only for the original purchaser and is not extended to  
owners of the product subsequent to the original purchaser. Any applicable  
implied warranties are limited in duration to a period of the express warranty as  
provided herein beginning with the date of the original purchase at retail, and  
no warranties, whether express or implied, shall apply to this product thereafter.  
Some states do not allow limitations on implied warranties, therefore these  
exclusions may not apply to you.  
was designed.  
It does not cover:  
Damage due to improper installation.  
Subsequent damage to other components.  
Damage caused by exposure to moisture, excessive heat, chemical cleaners,  
and/or UV radiation.  
Damage through negligence, misuse, accident or abuse. Repeated returns for  
the same damage may be considered abuse.  
Any cost or expense related to the removal or reinstallation of product.  
Speakers damaged due to amplifier clipping or distortion.  
Items previously repaired or modified by any unauthorized repair facility.  
Return shipping on non-defective items.  
Products with tampered or missing barcode labels.  
Products returned without a Return Authorization (RMA) number.  
Freight Damage.  
The cost of shipping product to Kicker.  
Service performed by anyone other than Kicker.  
Speaker with any foreign caulk used for gasket material.  
Length Without EndKaps:  
Frequency Response:  
Input Sensitivity:  
Signal-t0-Noise Ratio:  
High Pass Crossover Freq.: 10 Hz - 16 kHz in 1/12 Octave steps  
High Pass Crossover Slope: 0 (off) - 36 dB in 6 dB steps  
Low Pass Crossover Freq.:  
Low Pass Crossover Slope: 0 (off) - 36 dB in 6 dB steps  
KickEQ Frequency:  
KickEQ Bandwidth (Q):  
KickEQ Boost/Cut:  
Remote Bass Level Control: Included with each amplifier  
Power & Ground Terminals: Will accept up to 2 Gauge wire  
DSP Reaction Time / Delay: .7 milliseconds (In other Words...Real Fast!)  
Friend’s Reaction:  
Stranger’s Reaction:  
>100 dB  
30 Hz - 20 kHz in 1/12 Octave steps  
20 Hz - 20 kHz in 1/12 Octave steps  
.5 to 10 in .5 steps  
+/- 18 dB per Octave  
This warranty gives you specific legal rights; however you may have other  
rights that vary from state to state.  
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE  
That Shizzle's Off The Hizzle  
Dude...Sweet...  
HOW LONG WILL IT TAKE?  
Kicker strives to maintain a goal of 24-hour service for all returns.  
Delays may be incurred if lack of replacement inventory or parts is  
encountered.  
Defective merchandise must be returned to your local Authorized Stillwater  
Designs (Kicker) Dealer for warranty. Assistance in locating an Authorized Dealer  
can be obtained by writing or calling Stillwater Designs direct. You can confirm  
that a dealer is authorized by asking to see a current authorized dealer window  
decal.  
INTERNATIONAL WARRANTY  
Contact your International Kicker dealer or distributor concerning specific  
procedures for your country’s warranty policies.  
If it becomes necessary for you to return defective merchandise, call the  
Kicker Customer Service Department at (405)624-8510 for a Return Authorization  
(RMA) number. Package all defective items in the original container or in a pack-  
age that will prevent shipping damage, and return to  
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075  
The RMA number must be clearly marked on the outside of the package.  
Return only defective components. Return of entire cabinets, system packs,  
pairs, etc. increases your return freight charges. Non-defective items received  
will be returned freight collect.  
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510  
Include a dated proof-of-purchase stating the Customer name, Dealer  
name, product purchased and date of purchase. Warranty expiration on items  
without proof-of-purchase will be determined from type of sale and the manu-  
facturing date code. Freight must be prepaid; items received freight collect will  
be refused.  
Failure to follow these steps may void your warranty. Any questions can be  
directed to the Kicker Customer Service Department at (405)624-8510.  
KICKER drivers are capable of producing sound levels  
that can permanently damage your hearing! Turning  
up a system to a level that has audible distortion is  
more damaging to your ears than listening to an  
undistorted system at the same volume level. The  
threshold of pain is always an indicator that the sound  
WARNING:  
level is too loud and may permanently damage your  
hearing.  
Please use common sense when controlling volume!  
April 2003  
34  
35  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
Pizza Delivery  
36  
37  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chic’s Numbers  
Hook Ups  
38  
39  
SX .2 Series Amplifiers  
SX .2 Series Amplifiers  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer WE 14 User Manual
Intel Network Card M0344 ND User Manual
John Lewis Range JLRC101 User Manual
JVC Laser Level HR P111EE User Manual
JVC Stereo System CA MXGA3V User Manual
Kenmore Dishwasher 5871623 User Manual
KitchenAid Clothes Dryer KEYS700E User Manual
KitchenAid Oven KEBC171K User Manual
Kompernass Iron KH1281 04 07 V1 User Manual
Krell Industries CD Player KAV 280cd User Manual