Keys Fitness Home Gym ST NBB User Manual

Owner’s Manual  
ST-NBB  
Questions?  
Call Us Toll Free  
Keys Fitness Helpline  
1-888-340-0482  
Model Name : ST-NBB  
Manufactured Date :  
PO # :  
Model Name Decal Location  
215-00092  
09/06 Rev A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Information  
Please read all instructions carefully before using this product.  
SAFETY TIPS  
Consult with your physician before engaging in any vigorous exercise. Know your heart rate  
and/or pulse as well as your physician-recommended heart rate training zone. Proper medical  
clearance is recommended for anyone beginning an exercise program especially if you are 35  
years of age or older or suffer from heart respiratory problems.  
- Warm-up before any exercise program with 8 minutes of aerobic-like activity followed  
by stretching from head to toe.  
- Wear comfortable clothes that allow freedom of movement and are not tight or  
restricting.  
- Wear comfortable shoes made with good support and non-slip soles.  
- Breath naturally, never holding your breath during an exercise.  
- Perform exercises consistently with proper technique and pass through a full range of  
motion.  
- Increase resistance by adding heavier weights. Decrease resistance by using lighter  
weights.  
- Always use a spotter for safety.  
- Avoid over-training. You should be able to carry on a conversation while exercising.  
- After an exercise session. Cool down with slow stretching, cycling or walking.  
EXERCISE DEFINITIONS:  
Sets: A set is one complete routine of exercises. Complete 1-3 sets for each exercise.  
Repetitions: (referred to as reps) Is the number of times you perform an exercise in a row.  
We recommend beginning with 6 reps and increasing up to 12 reps as indicated below.  
Novice: Start with one set of 8-12 reps. Once you can complete the entire set of 12 reps con-  
secutively, progress to the intermediate level.  
Intermediate: Complete 2 sets of 8-12 reps once you can complete two sets of 12 reps con-  
secutively, progress to the advanced level.  
Advanced: Complete 3 sets of 12 reps  
DISCLAIMER:  
Keys Fitness is not responsible for the misuse of any of its products or for any injury sustained  
while using any Keys Fitness product. The consumer uses any or all of Keys Fitness Products at  
their own risk.  
BEFORE YOU BEGIN:  
Before you begin assembly of your Keys Fitness product, please take a moment to review the  
hardware and parts list on the following pages. Each part has been illustrated and numbered  
for easy identification.  
Check this list against the contents of your package to make sure you have all required parts.  
If any parts are missing, please do not return this product to the store. Contact our service  
department immediately at 1-888-340-0482 and we will rush you any parts you may require.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Assembly Hardware  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.  
STEP 1  
Connect the Uprights (#2) & (#12) to the Cross Bar (#01) using  
four Hex bolts M10X75 (#33) and eight D10 washers (#35), two  
Reinforcement (#17) and four M10 aircraft Nut (#36).  
Insert the Crutch (#3) into the Uprights (#2)&(#12) through rect.  
Outer plug (#16), secure with two Knob Bolts (#15).  
Attach Safety Hook (#25) to Crutch (#3) using Aircraft Nut (#28).  
Place Backrest Adj. Bar (#4) Between Uprights (#2 ) and (#12).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.  
STEP 2  
Attach the back of the Main Frame (#5) to the Cross Bar (#1) with  
two bolts M10X75 (#33), four D10 Washers (#35) and two M10 air-  
craft nuts (#36).  
Insert the Front Base (#6) into the bottom of the Front Stand tube  
(#8), secure with a L-Shaped Lock Pin (#24).  
Connect the Front Stand Tube (#8) to the Main Frame (#5) using two  
hex bolts M10X25 (#34), four D10 Washers (#35), and two M10 air-  
craft nuts (#36).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.  
STEP 3  
Install the Leg Developer (#7) to bracket of Leg Developer Holder  
(#11) using one M10X75 Bolt (#32), two D10 Washers (#35), and  
one M10 aircraft nut (#36),  
Insert the Roller Foam Tube (#10) halfway into leg developer (#7).  
Push Roller Foams (#18) on each side of roller tube (#10) to com-  
plete leg develops assembly.  
Insert the Leg Developer Holder (#11) into the opening top of the  
Front Stand Tube (#8) through rect. Outer Plug (#16) and secure  
with Knob Bolt (#15).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.  
STEP 4  
Attach the backrest support (#9) to the pivot on the Main Frame (#5)  
.
Align Backrest Pad (#13) to backrest support (#9) and secure with  
four M6X40 Bolts (#29), and four D6.5 washers (#31).  
Place the seat pad (#14) on bracket of the Main Frame (#5) and  
secure with four M6X15 Bolts (#30), and four D6.5 washers (#31).  
And adjust the height with the backrest Adjustment Bar (#04).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.  
STEP 5  
Attach the two Butterfly Arms (#40) to the Upright Beams  
(#2)&(#12) with two M10x120 Hex Bolts (#39), two M10 Regular  
nuts (#37), two D10 spring washers (#38) and two M10 aircraft nuts  
(#36).  
Insert the Handrail Bar (#41) through upper holes on Butterfly Arm  
(#40), slide Foam Rollers (#18) on Handrail Bars (#41). For easy  
assembly, spray inside of foam rollers with glass cleaner or hairspray.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List  
ST-NBB Parts List Rev A  
Ref #  
Part #  
Description  
Qty  
1
1
2
3
4
5
6
7
8
9
223-00790 CROSS BAR, M-NBB (SILVER)  
223-00791 RIGHT UPRIGHT, M-NBB (SILVER)  
223-00522 CRUTCH, M-NBB  
1
2
219-00487 BACKREST ADJ BAR, ST-NBB (NEW GAUGE)  
223-00792 MAIN FRAME, M-NBB (SILVER)  
223-00793 FRONST BASE FRAME, M-NBB (SILVER)  
223-00530 LEG DEVELOPER M-SBA  
1
1
1
1
223-00794 FRONT STAND TUBE, M-NBB (SILVER)  
223-00409 BACKREST SUPPORT, M-NBB  
1
2
10 219-00295 ROLLER FOAM TUBE, M-NBB  
11 219-00296 LEG DEVELOPER M-NBB  
12 223-00795 LEFT UPRIGHT, M-NBB (SILVER)  
13 228-00212 BACK PAD, ST-NBB (BLACK/GREY/LOGO)  
14 228-00213 SEAT PAD, ST-NBB (GREY/BLACK/LOGO)  
15 210-00042 KNOB BOLT 7/16" st2300, M-NB/NBB, M-OBA  
16 206-00249 RECT. OUTER PLUG 50mm  
17 219-00562 REINFORCEMENT PLATE  
18 219-00339 ROLLER FOAM  
3
1
1
1
1
3
3
2
8
19 206-00222 SQUARE INNER PLUG 38  
20 206-00223 SQUARE INNER PLUG 25  
21 202-00379 PLUG, SQUARE INNER, 45  
22 206-00160 BUMPER  
6
6
1
1
23 206-00228 ROUND PLUG, 25X1.5  
24 210-00108 LOCK PIN M-NBB  
17  
1
25 219-00229 SAFETY HOOK M-SBA  
26 202-00380 PLUG, SQUARE INNER, 50  
27 202-00381 METAL BUSHING, M-NBB  
28 202-00179 AIRCRAFT NUT M8  
1
6
6
2
29 202-00173 HEX BOLT, M6*40  
4
30 202-00174 HEX BOLT M615  
4
31 202-00175 WASHER, D6.5  
8
32 202-00177 HEX BOLT, (3/8*2 7/8) M10*75  
33 202-00170 HEX BOLT, 10*75  
1
6
34 202-00171 HEX, M10*25  
2
35 202-00169 WASHER, DIA10 M-PR  
36 202-00168 AIRCRAFT NUT, M10 M-PR  
37 202-00378 REGULAR NUT, M10  
38 202-00284 SPRING WASHER, D10  
39 202-00172 HEX BOLT, M10*120  
40 223-00408 BUTTERFLY ARM#7 M-NBB  
41 219-00294 HANDRAIL BAR M-NBB  
42 206-00165 PVC TUBE M-NBB  
22  
11  
2
2
2
2
2
2
#
#
202-00197 BOLT PACK M-NBB  
215-00092 MANUAL ST-NBB  
1
1
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Exploded View  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
KEYS FITNESS PRODUCTS, L.P.  
STRENGTH TRAINER  
WARRANTY  
Keys Fitness Products L.P. warrants this product for a period of 90 days on parts and lifetime  
on the frame from the original date of purchase. This warranty covers the product from defects  
in materials and workmanship for the original purchaser. Using this product for commercial  
purposes, products damaged by misuse, abuse, or from shipping, moving and storage will void  
this warranty.  
Replacement parts are available from Keys Fitness Products L.P.  
To contact us for customer service or replacement parts, call 1-888-340-0482.  
CUSTOMER SERVICE  
If you have any questions regarding this or any Keys Fitness product, or if we may be of  
assistance in any way, please do not hesitate to call our toll free number 1-888-340-0482.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keys Fitness Products, L.P.  
4009 Distribution Drive, Suite 250  
Garland, Texas 75041  
Customer Service: 1-888-340-0482  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Invacare Mobility Aid Nutron Series User Manual
JAI Security Camera VIS CAM 350 User Manual
JVC Flat Panel Television AV 28X4BU User Manual
JVC Speaker System CA UXH100 User Manual
JVC VCR LPT0678 001A User Manual
Kicker Stereo Amplifier ZX3001 User Manual
KitchenAid Refrigerator KUDC03IT User Manual
KitchenAid Ventilation Hood KWCU360JSS0 User Manual
Kodak Digital Camera V1073 User Manual
Korg Electronic Keyboard 2GFEJ User Manual