Keys Fitness Bicycle 920U User Manual

OWNER’S MANUAL  
QUESTIONS?  
Call Our Toll Free  
Keys Fitness Helpline  
1-888-340-0482  
1-888-340-0482  
Monday-Friday  
8:30-5:30 Central Time  
CAUTION!  
Please read the precautions and  
Keys Fitness Products, L.P.  
Keys Fitness Products, L.P.  
4009 Distribution Dr.  
Suite 250  
instructions in this manual before  
using this equipment. Please save  
this manual for future reference.  
P.O. Box 551239  
Dallas, Texas 75355-1239  
Garland, Texas 75041  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before You Start  
Safety Precautions and Tips  
It is the owner's responsibility to ensure that all users of this exer-  
cise bike have read the Owner's Manual and are familiar with  
warnings and safety precautions.  
Thank you for purchasing a Keys exercise bicycle! This quality  
product you have chosen was designed to meet your needs for  
cardiovascular exercise.  
• This exercise bike has a maximum user capacity of 300 pounds.  
Prior to assembly, remove components from the box and verify  
that all the listed parts were supplied. Assembly instructions are  
described in the following steps and illustrations.  
• The Alliance Exercise Bike should only be used on a level sur-  
face and is intended for indoor use only. It should not be placed  
in a garage, patio or near water. Keys recommends an equip-  
ment mat be placed under the bicycle to the protect the floor or  
carpet and for easier cleaning.  
Important Safety Information  
WARNING!  
• Wear comfortable, good-quality walking or running shoes and  
appropriate clothing. Do not use this exercise bike with bare  
feet, sandals, socks or stockings!  
1) Before using this exercise bicycle or starting any exercise  
program, consult your physician. This is especially important  
for persons over the age of 35 and/or persons with pre-existing  
health problems. Keys Fitness Products LP assumes no respon-  
sibility for personal injury or property damage sustained by or  
through the use of this product.  
• Always examine your exercise bike before using to ensure all  
parts are in working order.  
• Do not leave children unsupervised near or on the exercise  
bicycle.  
2) To reduce the risk of electrical shock, burns, fire or other pos-  
sible injuries to the user, it is important to review  
• Never operate the exercise bicycle where oxygen is being  
administered or where aerosol products are being used.  
this manual and the following precautions before operation.  
• Never insert any object or body parts into any opening.  
• Service to your Alliance Exercise Bike should only be per-  
formed by an authorized service representative, unless author-  
ized and/or instructed by a Keys technician. Failure to follow  
these instructions will void the warranty.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly of Alliance  
920 Upright Bike  
REMOVE ALL SECURITY TAPE AND WRAPPING  
BEFORE BEGINNING.  
1
2
1. Attach foot tubes (4) to the frame by using the carriage bolts  
(44), flat washers (50) and cap nuts (45) provided. Make sure  
the foot tube with wheels is assembled onto the front of the  
unit.  
2. Attach the seat (9) to the seat post (3) with the locknuts  
(49) and flat washers (50) already provided on the underside  
seat bolts.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
3
4. Slide the console tube (2) through the console tube collar (14,  
15). Connect the computer cable in the console tube to the  
computer cable in the main frame. Attach the console tube (2)  
to the frame with the locknuts (49), flat washers (50) and  
screws (56) provided. Attach the console tube collar (14, 15)  
to the main frame (1) with screws (57) .  
3. Attach pedals (30, 31). Axles of pedals are branded "L" and  
“R.” The pedal marked “R” goes on the right hand side of the  
bike and the one marked “L” on the left hand side. Tighten  
the left pedal by turning counter-clockwise and the right pedal  
by turning clockwise.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
6
6. Connect the computer cable at the top of the console tube (2)  
to the console (5). Both computer cable connections have  
white ends. Feed the pulse wires from the console (5) down  
into the console tube (2) and out the rear hole in the handlebar  
area. Attach the console tube (2) to the console (5) with the  
screws (59) provided and already attached to back of the  
console (5).  
5. Load your console with the batteries provided. Batteries are 4  
“AA” size.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
8
7. Attach the pulse wires in the handlebar (10) to the wires from  
the console (5). Connect the handlebar (10) to the console  
tube with the locknuts (49), flat washers (50) and screws (55)  
provided. Make sure not to “pinch” any of the pulse wires  
when connecting the handlebar to the console tube. Attach the  
elbow pads (24) to the handlebar (10) with screws (60).  
Attach bottle rack (2-1) to console tube (2).  
8. You have completed the assembly of your new Alliance bike.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
920U PARTS LIST  
920U EXPLODED VIEW  
#
1
2
PART  
QTY  
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
2
2
2
2
2
1
1
2
1
1
#
PART  
QTY  
1
FRAME  
32 LEFT CRANK  
CONSOLE TUBE  
33 RIGHT CRANK  
1
2-1 BOTTLE RACK  
34 LOCKING KNOB  
35 6004 PRECISE BEARING  
36 608 PRECISE BEARING  
37 EYEBOLT  
1
3
4
5
6
7
8
9
SEAT POST  
FOOT TUBE  
CONSOLE  
2
1
2
PULLEY  
38 SPRING  
1
GENERATOR  
CONTROLLED BOARD  
SEAT  
39 BELT TENSION BRACKET  
40 ADJUSTMENT CHANNEL  
41 SENSOR  
1
2
1
10 HANDLEBAR  
42 IDLER PULLEY  
1
11 BOTTOM LEFT COVER  
12 BOTTOM RIGHT COVER  
13 TOP COVER  
43 CRANK CENTRAL CAP  
44 M8X85mm CARRDIAGE BOLT  
45 M8 CAP NUT  
2
4
4
14 CONNECTING LEFT COVER  
15 CONNECTING RIGHT COVER  
16 LEFT SEAT POST COVER  
17 RIGHT SEAT POST COVER  
18 PLASTIC COLLAR  
19 “V” BELT  
46 M6 LOCKNUT  
4
47 6mm HEX NUT  
2
48 M10 CAP NUT  
2
49 M8 LOCKNUT  
10  
50 M8 IDX18.8mm OD  
FLAT WASHER  
14  
2
20 WHEEL  
51 M20X32X2mm WASHER  
52 CRANK NUT  
21 FOOT CAP  
2
22 BALL PLUG  
53 M8X17mm SCREW  
54 M8X38mm SCREW  
55 M8X57mm SCREW  
56 M8X60mm SCREW  
57 TP4X12mm SCREW  
58 TP5X50mm SCREW  
59 M5X10mm SCREW  
60 M6X45 MACHINE SCREW  
1
23 SLEEVE  
1
24 ELBOW PAD  
3
25 HAND PULSE  
3
26 PULSE WIRE  
28  
4
27 CONTROLLER WIRE  
28 EXTENSION WIRE  
29 9mm NUT  
4
4
30 LEFT PEDAL  
31 RIGHT PEDAL  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
920U Display Instructions  
Your Alliance 920U is equipped with a programmable monitor to  
help you track your progress and motivate you to reach your fit-  
ness goals. In order to set your programmable monitor, you must  
begin pedaling.  
1. Key Functions:  
a. RESET - Resetting all cumulative values to zero.  
b. ENTER - Confirming of “set values,” “selections” and  
“Quick Start” function.  
-
c.  
Increasing and decreasing the set values and resistance  
+
during Operation.  
2. Display:  
There are three displays in the console:  
W1= display window on top, W2=display window in middle and  
W3= last display window at bottom of console.  
a. W1 = Display every cumulative value including TIME, CALORIES,  
DISTANCE, SPEED and RPM.  
. .. .  
.8..8. 8 8  
b. W2 =  
1. display profile of every program.  
2. display operation information in input mode by rolling characters.  
3. display “score” when “Fitness Test” program is finished. (see step 4D)  
c. W3 = Display “Heart Rate” and ”Workout Level.”  
8 8 8  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C. “HRC” program.  
3. Indicator:  
a. TIME  
b. CALORIES  
d. SPEED  
e. RPM  
f. SCAN  
g. MANUAL  
h. CONSTANT POWER  
i. INTERVAL  
j. HILLS  
k. PLATEAU  
l. MOUNTAIN  
m. HRC  
1. Step 1 to 6 is similar to B, but “HRC” program also requires age and  
target heart rate.  
7. Press ENTER key, (W2) displays “ENTER AGE” and (W1) displays  
preset age of last operation.  
-
8. Set age of exerciser by  
keys.  
+
9. Press ENTER key, (W2) displays “TARGET HART RATE,” (W1)  
displays preset value of target heart rate, which depends on age of  
the exerciser.  
-
10. Choose target heart rate by  
keys.  
+
11. Press ENTER key.  
12. (W2) displays “PRESS ENTER TO BEGIN”  
13. Press ENTER key and start to exercise.  
n. FITNESS TEST  
D. “FITNESS TEST” program.  
This 8 minute test program calculates your approximate oxygen uptake. At  
the end of the program you will receive a Fit Test Score which is the equiva-  
lent of your approximate VO2 max. This number should be used as a refer-  
ence to gauge aerobic improvements over an extended workout protocol.  
Please use the following table for reference only:  
4. Operation Process:  
A. “QUICK START” MODE:  
1. Press RESET key, all LED of the console turns on for 2 seconds.  
2. Press ENTER key during 2 seconds in step 1, the console is in “Quick  
Start” mode, and displays the profile of “Manual” program.  
3. “TIME” and “SCAN” indicators of (W1) turn on. Operation time is count-  
ing up and every display value of (W1) is scanning per 4 seconds interval.  
4. (W2) displays each column as 1 minute of operation then the completed  
column will shift to the right.  
Standards for evaluating aerobic fitness (VO2 max)  
Age  
Low  
Fair  
Average  
Good  
High  
-
Women  
20-29  
30-39  
40-49  
50-59  
60-69  
+
5. Exerciser can adjust working level by  
6. Stop this mode by pressing RESET key.  
keys  
<24  
<20  
<17  
<15  
<13  
24-30  
20-27  
17-23  
15-20  
13-17  
31-37  
28-33  
24-30  
21-27  
18-23  
38-48  
34-44  
31-41  
28-37  
24-34  
>49  
>45  
>42  
>38  
>35  
B. “MANUAL,” “CONSTANT POWER,” “INTERVAL,” “HILLS,”  
“PLATEAU” and “MOUNTAIN” programs.  
1. Press RESET key, (W2) displays ENTER WEIGHT  
-
2. Preset weight of exerciser by  
keys.  
+
Men  
20-29  
30-39  
40-49  
50-59  
60-69  
3. Press ENTER key, (W2) displays “SELECT PROGRAM”.  
-
<25  
<23  
<20  
<18  
<16  
25-33  
23-30  
20-26  
18-24  
16-22  
34-42  
31-38  
27-35  
25-33  
23-30  
43-52  
39-48  
36-44  
34-42  
31-40  
>53  
>49  
>45  
>43  
>41  
4. Choose desired program by  
keys and indicators of desired program  
+
turn on. Corresponding profile of program is displayed on (W2).  
5. Press ENTER key, (W2) displays “WORKOUT TIME” and (W1)  
displays preset time value of last operation.  
-
6. Set new time value by  
7. Press ENTER key.  
keys.  
+
8. (W2) displays “PRESS ENTER TO BEGIN”  
9. Press ENTER key and start to exercise.  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Step 1-4 is similar to B, but “FITNESS TEST” program also requires age  
and sex of user.  
Monitoring Your Heart Rate  
5. Press ENTER key, (W2) displays “ENTER AGE” and (W1) displays  
To obtain the greatest cardiovascular benefits from your exercise  
workout, it is important to work within your target heart rate  
zone. The American Heart Association (AHA) defines this target  
as 60%-75% percent of your maximum heart rate.  
preset age of last operation.  
-
6. Set age of the exerciser by  
7. Press ENTER key, (W2) displays “SET SEX,”  
keys.  
+
-
8. Choose “MALE” or “FEMALE” by  
keys, (W1) displays MALE  
+
or FEMALE correspondingly.  
9. Press ENTER key, (W2) displays “PRESS ENTER TO BEGIN”  
Your maximum heart rate may be roughly calculated by subtract-  
ing your age from 220. Your maximum heart rate and aerobic  
capacity naturally decreases as you age. This may vary from one  
person to another, but use this number to find your approximate  
effective target zone. For example, the maximum heart rate for an  
average 40 year-old is 180 bpm. The target heart rate zone is  
60%-75% of 180 or 108-135 bpm. See Fitness Safety on page 20.  
10. Press ENTER key and start to exercise.  
E. START MODE  
1. Each column of (W2) represents one minute of operation when time is  
being counted up.  
2. In (W2) presetting time value divided by 16 is equal to each column  
when operation time is being counted down.  
3. Press ENTER key to change the “SCAN” function in operation and the  
corresponding indication of “SCAN” will turn on or off.  
-
Before beginning your workout, check your normal resting heart  
rate. Place your fingers lightly against your neck, or against your  
wrist over the main artery. After finding your pulse, count the  
number of beats in 10 seconds. Multiply the number of beats by  
six to determine your pulse rate per minute. We recommend tak-  
ing your heart rate at these times; at rest, after warming up, dur-  
ing your workout and two minutes into your cool down, to accu-  
rately track your progress as it relates to better fitness.  
4. The exerciser can adjust workout level by using  
except during “FITNESS TEST” program.  
keys in operation  
+
F. RESULT MODE  
1. When operation time is finished, the console is in  
“Result state”, (W1) displays the following data in  
4 second intervals.  
a. Total operation time.  
b. Cumulative calories.  
c. Cumulative distance.  
d. Average speed.  
e. Average RPM.  
2. W3 displays “average heart rate”  
3. W2 displays “RESULTS MODE” and shows profiles  
of every program for 2.5 seconds sequentially, except in  
“FITNESS TEST” program.  
During your first several months of exercising, the AHA recom-  
mends aiming for the lower part of the target heart rate zone-  
60%, then gradually progressing up to 75%.  
According to the AHA, exercising above 75% of your maximum  
heart rate may be too strenuous unless you are in top physical  
condition. Exercising below 60% of your maximum will result in  
minimal cardiovascular conditioning.  
4. W2 displays “SCORE=000” when “FITNESS TEST”  
Program is completed.  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check your pulse recovery rate – If your pulse is over 100 bpm  
five minutes after you stop exercising, or if it’s higher than  
normal the morning after exercising, your exertion may have been  
too strenuous for your current fitness level. Rest and reduce the  
intensity next time.  
TARGET HEART RATE ZONE  
Fitness Safety The target heart rate chart indicates aver-  
age rate zones for different ages. A variety of different factors (including  
medication, emotional state, temperature and other conditions) can  
affect the target heart rate zone that is best for you. Your physician or  
health care professional can help you determine the exercise intensity  
that is appropriate for your age and condition.  
200  
195  
100%  
190  
185  
180  
175  
170  
165  
160  
Serious  
athletic  
training range  
155  
132  
85%  
170  
166  
162  
157  
153  
149  
145  
140  
136  
Cardiovascular  
conditioning  
range  
(MHR) = Maximum Heart Rate  
(THR) = Target Heart Rate  
150  
146  
75%  
143  
139  
135  
131  
128  
124  
120  
Fat burning  
range  
116  
93  
220 - age = maximum heart rate (MHR).  
MHR x .60 = 60% of your maximum heart rate.  
MHR x .75 = 75% of your maximum heart rate.  
60%  
120  
117  
114  
111  
108  
105  
102  
99  
96  
For example, if you are 30 years old, your  
calculations will be as follows:  
220 - 30 = 190  
20  
25 30  
35  
40 45  
50  
55 60 65  
190 x .60 = 114 (low end or 60% of MHR)  
190 x .75 = 142 (high end or 75% of MHR)  
30 year-old (THR) Target Heart Rate would be 114-142.  
AGE  
See Table on right for additional calculations.  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer IWE 81281 S User Manual
Infiniti Speaker System Infinity Total Speaker Solutions User Manual
Ingersoll Rand Water Pump 66615X X C User Manual
Insignia Digital Camera NS DSC10A User Manual
JBL Home Theater System CS1500 User Manual
JVC Car Stereo System LVT1372 003A User Manual
JVC Speaker System FS H100J User Manual
Kalorik Electric Steamer USK DG 1 User Manual
Kambrook Vacuum Cleaner KHV100 User Manual
Korg Electronic Keyboard PA50sd User Manual