®
Match 5.0 Table Tennis Table
Models 7136-000-500 & 7176-000-090-500
Adult Assembly Required
Made in Germany
Picture Similar
KETTLER®International Inc. • 1355 London Bridge Road • Virginia Beach, VA 23453 USA
Please do not return this product to
the store. Contact KETTLER® for
parts and service: call toll free
866.804.0440 or send email to
parts@kettlerusa.com. Please visit
view a video demonstration of
product assembly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Assembly (continued)
General Assembly Instructions
• The equipment must be assembled with care by two
adults.
• The fastening items required for each assembly step
are shown at the beginning of the step. Use the
fastening items exactly as instructed.
• Separate all the parts including the hardware.
Compare quantities with the package contents
section and that all items are undamaged. If there
• Bolt all the parts together loosely at first, and check
that they have been assembled correctly. Then use
spanner for final tightening. Then check that all
screw connections have been tightened firmly.
®
are any problems, please contact KETTLER .
• Before assembling the equipment, study the
drawings and photos carefully then assemble in the
order shown.
• For technical reasons, we reserve the right to carry
out preliminary assembly work (e.g. addition of
tubing plugs).
• Please note that there is always a danger of injury
when working with tools or doing manual work.
Therefore, please be careful during assembly.
• Please keep original packaging, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement
and in packaging that is safe for transportation ( in
the original box if possible). It is important to provide
a detailed defect description/damage report.
• Ensure that your working area is free of possible
sources of danger, for example don’t leave any tools
lying around. Always dispose of packaging material
in such a way that it may not cause any danger.
There is always a risk of suffocation if children play
with plastic bags!
Package Contents
7176
7136
Number Included - 2
Number Included - 2
Number Incl - 4 non locking
Number Incl - 4 locking
Number Included - 2
Number Included - 2
Number Included - 2
Number Included - 2
Number Included - 2
Number Included - 2 pairs
Number Included - 2
Number Included - 4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents (continued)
Number Incl. - 1-6mm, 2-8mm
Number Incl. - 2 (outdoor only)
Number Included - 2
Number Included - 2
Number Included - 1
Number Included - 1
Number Included - 2
Number Included - 2
Items below are shown at actual size
Number Included - 4
m8x125
Number Included - 4
m8x110
Number Included - 4
m8x45
Number Included - 2
4.8x25
Number Included - 6
3.9x25
Number Included - 4
m6x60
Number Included - 8
3.9x13
Number Included - 4
m6x50
Number Included - 2
Number Included - 4
m6x49
Number Included - 28
dia 16x8
Number Included - 26
dia 12x6
Number Included - 2
m6x37
Number Included - 2
m6x30
Number Included - 4
m6x25
Number Included - 4
dia 25x8
Number Included - 4
dia 30x8
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents (continued)
Items below are shown at actual size
Number Included - 2
Number Included - 18
m6
Number Included - 8
m8
Number Included - 4
Number Included - 8
m12x6x3
Number Included - 2
Number Included - 8
Number Included - 4
m26x19x6
Number Included - 2
m16x8x3
Number Included - 2
Number Included - 4
Number Included - 8
m12x6x15
Number Included - 4
Number Included - 4
Number Included - 2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Begin the assembly of your table by carefully removing
the plastic wrap and all of the loose contents. Separate
the two table tops by removing the four plastic corner
protectors and the plastic side strips.
Step 1
2 Required
Align footlock with stemtube.
Insert drift pin. There are two footlocks and
stemtubes. Assemble both as shown.
A
B
C
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 2
Paying attention to position of wheelbase, assemble
the stemtubes to base in order shown.
Insert endcaps.
Assemble two wheelbase assemblies.
4 Required
End view and perspective view
8 Required
4 Required
4 Required
dia 25x8
4 Required
m8x125
8 Required
dia 16x8
4 Required
m8
A
B
E
C
D
F
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 2 (continued)
G
J
H
K
I
L
Photo K shows the non locking stemtube being
installed. Step E to step J are the same for the locking
and non locking stemtube.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 3
Install non-locking wheels.
Do not over torque; wheels should roll smoothly.
Install non-locking wheels on both wheelbase
assemblies.
8 Required
2 Required
dia 16x8
8m
2 Required
m8x110
A
D
B
E
C
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 4
Install locking wheels.
The grooves of wheels should face inward.
Again, do not over torque; wheels should roll smoothly.
Push down foot lock to lock the wheels.Install non-locking
wheels on both wheelbase assemblies.
8 Required
dia 16x8
2 Required
m8
2 Required
m8x110
A
D
B
E
C
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 5
Paying attention to position of wheelbase, snap alignment
struts into place.
Bolt locking struts to base. Bolt the locking strut with
thumb latch to the same side as locking wheels. Bolt strut
without latch to the side of non-locking wheels.
Assemble two identical wheelbase assemblies with wheels
and struts.
4 Required
m6x25
4 Required
dia 12x6
4 Required
m6
A
B
C
D
G
E
F
H
I
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 6
Bolt one M8 crossbar between each wheelbase. This
crossbar is being assembled temporarily to create a
support base and will be removed at a later step.
M8 threads
For outdoor tables only: slide the shimpad onto wheelbase
(steps B, C, and D).
The assembly thus far should match photo E.
M6 threads
2 Required
m8x45
A
D
B
E
C
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 7
Insert endcap into the bottom of netpost bar.
Using M6 crossbar, assemble crossbar and netpost bars
to alignment struts.
The netpost bar installation is repeated on the other
wheelbase assembly. Fastener quantities include
installation on both wheelbase assemblies.
The assembly thus far should match photo G.
4 Required
m6x50
2 Required
6 Required
dia 12x6
2 Required
m6
A
D
G
B
C
F
E
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 8
Screw eyelets to four Jbars.
Assemble safety levers to two of the Jbars.
Slide handgrip onto safety lever.
Note the orientation of the slot in the safety
lever and the Jbar as shown in photo E.
4 Required
dia 12x6
2 Required
m6
4 Required
3.9x13
2 Required
m6x30
4 Required
2 Required
A
D
G
B
C
F
note position
E
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 9
Screw eyelets to support leg on table-top half.
Repeat for second table-top half.
4 Required
3.9x13
4 Required
Support Leg
A
B
C
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 10
Important: have two people complete steps 10-12. With assistance, lift one
table top onto the wheelbase; the legs will be facing outward. Have one
person support the top while it is resting on the base while the other
completes assembly.
Assemble crossbar to Jbars and support leg in the order shown. Note: a
Jbar with safety lever should be assembled on the right side (side with non
locking wheels) and a Jbar without lever on the left side (side with locking
wheels). The support leg is always assembled closest to the wheelbase. You
may need to lower table slightly to line up the bolt holes. Do not fully tighten
the bolts until both ends are assembled.
Jbar
Support Leg
2 Required
m8x45
2 Required
dia 16x8
2 Required
m26x19x6
2 Required
dia 30x8
Support Leg
Jbar
Wheelbase
A
B
E
C
F
Jbar
D
Support Leg
Jbar
G
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 11
Raise safety lever up straight. Bolt the safety lever to leg.
Bolt the Jbars to leg.
Insert footcaps.
Leg
2 Required
m6x60
4 Required
m 12x6x3
End view and side view shown - 2 Required
m12x6x15
1 Required
m6x37
2 Required
dia 12x6
3 Required
m6
1 Required
m 16x8x3
2 Required
A
D
G
B
E
C
F
I
m 16x8x3
m 12x6x3
H
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 11 continued
Leg
L
J
K
Step 12
Bolt locking struts to support leg.
2 Required
m6x49
4 Required
m12x6
2 Required
m6
A
B
E
C
F
D
G
Now, remove the temporary crossbar
assembled in step 6. Carry out steps
10-12 again for the other side.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Open Table Top to Complete Assembly
To properly open table into playing position: lock wheels (H), push the
thumb latch down on the left locking strut. Squeeze the strut on the right
side and lower table into playing position. Support the table as you
lower it; never allow it to drop down.
C
A
B
D
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 13
Slide net post onto netpost bar and screw into place.
Insert guide plug.
Repeat on other side of table.
2 Required
4.8x25
2 Required
A
D
C
B
Step 14
Attach ball/racquet holder to netpost.
A
B
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Step 15
Screw sideshroud into place.
Repeat installation of second shroud on opposite side
wheelbase assembly.
6 Required
3.9x25
A
B
3 Screws
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Net Assembly
Net assembly:
Slide Jpin through net.. Place Jpin in designated slots. Tie
string to tension tab. Place string in slots over Jpin and net
post. Adjust net tension by adjusting tension tab.
Remove protective plastic film from table surface.
A
D
B
C
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Remove Film
Remove protective plastic
film from table surface.
Folding Table
Folding Table:
To properly fold the table, lock the wheels, press the safety
lever up and lift top. Once the top is halfway up you can
release lever and continue to fold the top.
A
B
C
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE
®
MANUFACTURER ON KETTLER PRODUCTS, EXCEPT THE MANUFACTURER’S LIMITED WARRANTY AGAINST
DEFECTS IN MATERIAL SET OUT BELOW:
®
®
This KETTLER Limited Warranty applies to products sold through the KETTLER Authorized Dealer Network to the
original retail purchaser and authenticated by proof of purchase from a retailer located in the United States. Any
shipments made under this warranty will be shipped to the United States only. Any shipment outside of the United States
®
will be at the sole cost of the customer. This KETTLER Limited Warranty is a manufacturer’s warranty and is not
changed or modified by additional warranties extended by individual retailers at the point of sale. Manufacturer warrants
this product to be free from defects in material at the time of the product’s tender of delivery for a period of 3 years for
residential use and 1 year for commercial use. This Limited Warranty is not transferable and does not cover normal wear
and tear (including, but not limited to, damage and wear to tires, power shocks, drive belts and other non-durable parts).
The liability of the manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or
consequential damages resulting from the defect. This Limited Warranty is void if the product is damaged by accident,
unreasonable use, improper service, failure to follow instructions provided, modification from its original state, or other
causes determined not arising out of defects in material.
This warranty gives you specific legal rights. Should this product become defective due to material within the warranty
®
period, contact KETTLER Parts & Service Dept. by phone at 866.804.0440, fax at 757.563.9273, or e-mail at
THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
®
AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF THE MANUFACTURER. KETTLER
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH SUCH PRODUCTS.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Ordering Spare Parts
When ordering spare parts, always state the full model number, spare part number, the quantity required and the serial number.
Example order: Model 7136-500/spare part number 70130761/qty 1/serial number…
Important: Spare part prices do not include fastening materials; if fastening material (bolts, nuts, washers, etc.) is required, this should be clearly stated on the order
by adding the words “with fastening material.”
®
Contact: KETTLER International Inc., 1355 London Bridge Road, Virginia Beach, VA 23453 USA
Serial Number
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare Parts
1
1
4
5
2
2
4
7
3
17
12
17
12
3
6
7
25
25
13
23
25
33
23
13
25
33
38
19
22
10
20
31
21
11
28
29
30
8
26
15
27
37
36
32
34 35
9
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare Parts
Spare Part Number
for 7136-500
Indoor
Spare Part Number
for 7176-500
Outdoor
Number
Required
Number Description
1
2
Top
2
2
4
8
4
4
2
2
2
2
2
2
2
4
2
1
1
1
2
2
4
8
8
2
2
2
1
2
2
4
2
4
4
2
1
94130117
94111138
70130540
94130125
94111129
70130540
10128028
Leg
3
Footcap
4
Clamp (outdoor table)
Clamp 25mm (indoor table)
Clamp 18mm (indoor table)
Support Leg
5
94110341
94110192
94111139
94111142
70130812
94111137
94111136
94111120
94111055
10100009
70130532
94180323
6
7
94111130
94111142
70130812
94111137
94111136
94111120
94111055
10100009
70130532
94180323
94180271
94180274
10128002
70130604
94111132
70130830
10116011
70115017
94111080
70130518
70130522
70130519
10100096
10107067
70130816
70130762
70130761
70130815
94111056
8
Wheelbase
9
Stemtube for non-locking wheel (3437)
Locking Strut with thumb latch
Locking Strut without thumb latch
Safety Lever
10
11
12
13
15
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Crossbar M8
Endcap 40x25mm
Handgrip
Hardware Bag (not illustrated)
Shimpad (pair) (outdoor table)
Net
94180274
10128002
70130604
94111132
70130830
10116011
70115017
94111080
70130518
70130522
70130519
10100096
10107067
70130816
70130762
70130761
70130815
94111056
Tension Tab
Alignment Strut
Jbar
Eyelet
Bushing
Sideshroud
Netpost Bar
Netpost
Ball and Racquet Holder
Guide plug (4439)
Endcap
Washer 26x19x6
Footlock (3507)
Non-locking Wheel
Locking Wheel
Stemtube for locking wheel (3508)
Crossbar M6
Spare Part Number
for 7136-000
Indoor
Spare Part Number
for 7176-000 & -090
Outdoor
Number
Required
Number Description
Top
1
2
94130098
94130003
27
Download from Www.Somanuals.com. All Manuals Search And Download.
®
©2011 KETTLER All rights reserved. No part of this manual may be
reproduced, stored in a retrieval system, or transmitted in any form, or by
any means, such as electronic, mechanical, photocopying or otherwise,
®
without the prior written permission of KETTLER .
KETTLER®International Inc., 1355 London Bridge Road, Virginia Beach, VA 23453 USA
For parts/service: call 866-804-0440 or e-mail parts@kettlerusa.com
Docu 7.05.11
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Insignia Portable Radio NS RAD01 C User Manual
Integra Computer Monitor PLA 50V1 User Manual
IRiver CD Player iMP 900 User Manual
John Deere Lawn Mower 2305 User Manual
Johnson Controls Network Card XP 910x User Manual
JVC Automobile Parts RX F10S User Manual
JVC VCR TC35KL3P User Manual
King Canada Saw KC 162SSC User Manual
KitchenAid Dishwasher W10078153B User Manual
Kompernass Hot Beverage Maker KH 1023 User Manual