WARNING! Do Not Sit In Chair
Until Stabilizer Bolt is secured.
2544 20” FOLDING ADIRONDACK CHAIR
Contents:
20” Folding Adirondack Chair
(2) Size 1/4-20 x 2” Stabilizer Bolts
(2) Washers
Locknut Washer Stabilizer Bolt
(2) Lock Nuts
Tools Required:
7/16” Wrench
#3 Phillips Head Screwdriver
1.
Unfold chair to align
predrilled holes so you
can insert and secure
stabilizer bolt.
Folded Adirondack Chair
UNSEATED
Folding Mechanism
2.
2.
Secure folding mechanism forward into
stationary position with chair in upright position.
3.
a. Align the predrilled holes and insert the 1/4 - 20
x 2” Bolt through seat and arm post then clean any
plastic residue from the bolt.
b. Slide the washer onto the end of the bolt.
Properly SEATED
Folding Mechanism
Place fold mechanism
in forward position
c. Slide the locknut onto the bolt and tighten the
nut.
Repeat on the other side.
3b.
3a.
3.
3c. Properly Seated
Washer and Nut.
Made in the U.S.A.
Copyright © Kettler USA 309.01
Download from Www.Somanuals.com. All Manuals Search And Download.
|