AUDIO VIDEO SURROUND RECEIVER
-
VRS 7200
INSTRUCTION MANUAL
KENWOOD CORPORATION
Quick Start Reference
Please read the following pages so that you can enjoy the surround sound at the best
condition.
(These pages give shortcut explanations on how to connect the speaker system to the
receiver, set up the speakers and play a source.)
"Let's play DVD video software" ^&
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has
several operation modes. These modes enable the remote control to control other audio/video
components. In order to effectively use the remote control it is important to read the operating
instructions and obtain a proper understanding of the remote control and how to switch its
operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the
operation modes may result in incorrect operations.
B60-5585-00 00 CS ( K, P, E, X ) KW 0410
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
How to use this manual
Special features
This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information.
True home theater sound ⁄ ~ ‹
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software and audio source. Select
a surround mode according to your equipment or the software you are
going to play and enjoy!
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor. Since this receiver works
with all your audio and video components, we will guide you in setting up
your system to be as easy as possible.
÷ Dolby Digital EX
÷ Dolby PRO LOGIC IIx, Dolby PRO LOGIC II
÷ Dolby Digital
Operations
Shows you how to operate the various functions available on the
÷ DTS-ES
receiver.
÷ DTS NEO:6
Remote Control
÷ DTS 96/24
Shows you how to operate other components using the remote control,
as well as a detailed explanation of all remote control operations. Once
youhaveregisteredyourcomponentswiththepropersetupcodes, you’ll
be able to operate both this receiver and your other AV components (TV,
VCR, DVD player, CD player, etc.) using the remote control supplied with
this receiver.
÷ DTS
÷ DSP Mode
÷ Dolby Virtual Speaker
÷ Dolby Headphone
GAME mode function
¡
Additional Information
When you connect a game machine to the GAME jacks on the front
panel, the input selector of the receiver switches automatically to
"GAME" and the optimum sound field for enjoying games is set.
This feature improves your convenience in playing video games.
Shows you additional information such as "In case of difficulty" (trouble
shooting) and "Specifications".
Unpacking
DUAL SOURCE function
¢
Unpack the unit carefully and make sure that all the accessories
are present.
While you enjoy audio listening through the speakers, another person
can enjoy another source (audio + video) through headphones by
connecting the source to the GAME, FRONT AUX jacks.
AM loop antenna
(For the U.S.A. and Canada)
(1)
ACTIVE EQ
∞
FM indoor antenna (1)
ACTIVE EQ mode will produce a more dynamic sound quality in any
condition. You can enjoy a more impressive sound effect when ACTIVE
EQ is turned on during Dolby Digital and DTS playback.
Remote control
·
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio and
video components. Just follow the simple setup procedure to register
the components you have connected.
Remote control unit
(For Europe and Australia)
(1)
FM indoor antenna (1)
RDS (Radio Data System) tuner (For Europe and Australia)
ª
The receiver is equipped with an RDS tuner that provides several
convenient tuning functions: RDS Auto Memory, to automatically preset
up to 40 RDS stations broadcasting different programs; station name
display, to show you the name of the current broadcast station; and PTY
search to let you tune stations by program type.
Antenna adaptor (1)
Batteries (R03/AAA)
(2)
If any accessories are missing, or if the unit is damaged or fails
to operate, notify your dealer immediately. If the unit was
shipped to you directly, notify your shipper immediately. Ken-
wood recommends that you retain the original carton and pack-
ing materials in case you need to move or ship the unit in the
future.
Keep this manual handy for future reference.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
Contents
Caution : Read the pages marked
carefully to ensure safe operation.
Before applying power..................... 2
Ambience effects .................................. 31
Surround modes........................... 31
Virtual modes ............................... 33
Surround play ............................... 34
Convenient functions ........................... 36
Adjusting the sound ..................... 36
Display dimmer adjustment ......... 38
Sleep timer ................................... 38
Safety precautions ................... 2
How to use this manual ................. 3
Unpacking....................................... 3
Special features.............................. 3
Contents ......................................... 4
Names and functions of parts ............... 5
Main unit ........................................ 5
Remote control unit ....................... 6
Setting up the system............................ 8
Connecting a DVD player ............... 9
Connecting video components,
Operations
Basic remote control operations for
other components ................................ 39
Registering setup codes for other
components ................................. 39
Searching for your code ............... 39
Checking the codes...................... 40
Re-assigning device keys ............. 40
Operating other components ....... 40
Clearing all of the settings registered or
stored in the remote control unit .....40
Setup code chart (RC-R0920) (For
U.S.A. and Canada) ...................... 41
Setup code chart (RC-R0920E) (For
Europe and Australia) ................... 44
DVD player , MD recorder CD player
& TV operations ........................... 55
VCR , Satellite receiver & Cable con-
verter operations ......................... 56
audio components........................ 10
Digital connections ....................... 11
Connecting the speakers ............. 12
Connecting the speaker terminals ... 13
PRE OUT jacks connections ........ 14
Connecting to the GAME jacks /
FRONT AUX jacks ........................ 14
Connecting the antennas ............. 15
Preparing the remote control ....... 15
Preparations
Remote
Control
Let’s play DVD video software
......................................................... 16
Preparing for playback ......................... 18
Speaker settings .......................... 18
Re-assignment of rear panel jacks ... 22
In case of difficulty................................ 57
Specifications
(For U.S.A. and Canada).................. 59
Specifications
Normal playback................................... 23
Listening to a source component ... 23
Listening with headphones .......... 24
Adjusting the sound ..................... 24
Recording .............................................. 26
Analog sources............................. 26
Digital sources.............................. 26
Listening to radio broadcasts.............. 27
Tuning (non-RDS) radio stations ... 27
Presetting radio stations .............. 27
Receiving preset stations............. 28
Receiving preset stations in order
(P.CALL) ........................................ 28
Using RDS (Radio Data System)
(For Europe and Australia)................... 29
Presetting RDS stations (RDS AUTO
MEMORY) ...................................... 29
Using the RDS DISP. (Display) key ... 29
Tuning by Program TYpe
Additional
Information
(For Europe and Australia).............. 60
Operations
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
(PTY search) ................................. 30
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Main unit
Input mode indicators
ACTIVE EQ indicator,
CLIP indicator
DUAL SOURCE Input indicator,
96 kHz fs indicator
MUTE indicator
Listenmodeindicators
Speaker selection indicators,
Dolby Headphone mode indicator,
Frequency display,
Input display, Preset
channel display,
Input channel indicators (The Input channel
indicators lights up to indicate the channels
contained in the input signal. The "S" indicator
lights when the surround component consists
of a single channel.)
Dolby Virtual Speaker mode indicator
Sleep timer indicator, TONE indicator,
AUTO indicator, ST. indicator,
TUNED indicator
Listen mode display
For Europe and Australia:
RDS indicator, PTY indicator
Display
7
1
2
3
4
5
6
8
9
View when the GAME/ FRONT AUX jack
$ #
@
!
0
cover is open.
1 ON/STANDBY key
Use to turn the power ON/STANDBY.
*
Dolby H indicator
LightswhentheDolbyHeadphonemode
is ON.
9 INPUT SELECTOR key
Use to select input sources.
0 SETUP key
£
‹
STANDBY indicator
Lights when the power is in the standby
mode.
DUAL SRC indicator
Lights when the DUAL SOURCE mode
is ON.
Use to select the speakers' settings
etc.
^*
¢
2 DUAL SOURCE VOLUME 5/∞ 6 Joystick
Use to switch the status of REC MODE.
§
keys
MULTI CONTROL % / fi
Use to control a variety of settings.
^*
Use to tune of radio broadcasting.
Use to adjust the volume in the DUAL
! LISTEN MODE key
Use to select the listening mode.
›
SOURCE mode.
¢
DUAL SOURCE INPUT key
Use to select the input for the DUAL
¶
@ GAME jacks
# FRONT AUX jacks
$ PHONES jack
$¡¢
$¢
SOURCE mode.
¢
MULTI CONTROL @ / #
Use to control a variety of settings.
^*
DUAL SOURCE ON/OFF key
UsetoswitchtheDUALSOURCEmode
Use for headphone listening.
¢
ON/OFF.
¢
Use to select of preset radio stations.
3 BAND key
•
Use to select the broadcast band.
¶ª
ENTER
Use to control a variety of settings.
^*
4 AUTO/MONO key
Use to select the auto or manual tuning
Use to presetting of radio stations.
¶
mode.
¶ª
Standby mode
5 Dolby D indicator
7 ACTIVE EQ key
Use to switch the status of ACTIVE EQ.
∞
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator
Lights when the receiver is in the
DTS mode.
While the standby indicator is lit, a small
amount of power is supplied to the system to
back up the memory. This is called standby
mode. Under the condition, the system can
be turned ON by the remote control unit.
›
8 VOLUME CONTROL knob
Use to adjust the receiver volume.
£
›
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes. qr
1
2
SOURCE key
Use to turn the other components ON/OFF.
·
RECEIVER
SLEEP
SOURCE
TV
RECEIVER key
Use to turn the power ON/STANDBY.
*
INPUT MODE ACTIVE EQ
DIMMER
3 SLEEP key
DISC SEL.
Use to set the Sleep timer.
°
1
4
7
2
5
8
0
3
6
For Europe
and
4 INPUT MODE key
INPUT SEL.
DISC SKIP
Use to switch between the full auto, digital and analog input.
Australia
8
LAST
RDS DISP.
5 Numeric keys
%
%
9
Use to selection of preset radio stations.
Use to operate other components.
6 +100 key
•
PAGE
PAGE
INFO
·
fi
fi
+100
+10
PTY
Use to operate other components.
INFO key
·
ANGLE
MUTE
AUDIO
SUBTITLE
Use to operate other components.
·
TOP MENU
/SETUP
MENU
/SOUND
VOLUME
7 AUDIO key
Use to operate the DVD component.
·
8 SUBTITLE key
ENTER
Use to operate the DVD component.
·
9 SETUP key
Use to select the speakers’ settings etc.
*
RETURN
/EXIT
ON SCREEN
/GUIDE
TOP MENU key
Use to operate the DVD component.
·
8
6
7
0 %/ fi keys
P.CALL
TUNING
Use to control a variety of settings.
Use to tuning of radio broadcasting.
Use to operate other components.
@/ # keys
*
4
¢
1
¡
-
CHANNEL
+
¶
·
TUNER
BAND
DVD
VIDEO1
F.AUX
VIDEO2
GAME
AUX
Use to control a variety of settings.
*
Use to selection of preset radio stations.
ENTER key
•
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
Use to control a variety of settings.
*
LISTEN MODE
TV VOLUME
Use to operate other components.
·
! RETURN key
Use to operate the DVD component.
EXIT key
·
Use to operate other components.
·
@ 3/8 key
Use to operate the CD, DVD, MD or VCR component.
# 8 key
Use to operate other components.
$ P.CALL keys
·
If the name of a function is different on the receiver and on
the remote control, the name of the remote control key in
this manual is indicated in parentheses.
·
Use to selection of preset radio stations.
•
4 / ¢ keys
Use to operate the CD, DVD or MD component.
CHANNEL +/ keys
Use to select the channels.
·
-
·
Continued to next page
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
% Input selector keys (TUNER, DVD, VIDEO 1, VIDEO 2,
⁄ VOLUME %/ fi keys
AUX, F. AUX, GAME)
Use to adjust the receiver volume.
£
Use to select input sources.
Sourceskeys(DVD, VIDEO1, VIDEO2, AUX, F. AUX,
GAME)
To control one of the registered sources without switching
thereceiver'sinputselectortothatsource, pressandholdthe
£
¤ ON SCREEN key
Use to operate the DVD component.
GUIDE key
Use to operate other components.
·
·
‹ 7 key
desired input selector key for more than 3 seconds.
·
Use to operate the CD, DVD, MD or VCR component.
› ¶ key
Use to operate the MD or VCR component.
·
·
^ BAND key
Use to select the broadcast band.
¶
·
& AUTO/MONO key
fi TUNING keys
Use to select the auto or manual tuning mode.
¶
Use to tuning of radio broadcasting.
1 / ¡ keys
Use to operate the CD, DVD, MD or VCR component.
¶
* LISTEN MODE %/fi keys
Use to select the listening mode.
›
( DOLBY VIRTUAL key
fl RCV (receiver) MODE key
Use to select the Dolby Virtual mode.
‹
Use to switch the remote control to the receiver control
) STEREO key
mode. *fl
Use to switch the listen mode temporary to the stereo mode.
‡ REMOTE SETUP key
fi
Use to register other components. ·‚
¡
TV key
Use to turn the TV on and off.
° TV INPUT key
Use to select TV input.
TV MUTE key
Use to temporarily mute the TV sound.
™ LED indicator
Blinks to show that signals are being transmitted.
£ DIMMER key
TV MODE key
Use to adjust the brightness of the display.
°
Use to switch the remote control to the TV control mode.
TV VOLUME %/ fi keys
Use to adjust the TV’s volume.
¢ ACTIVE EQ key
Use to switch the status of ACTIVE EQ.
∞
∞ DISC SEL. key
Use to operate other components.
INPUT SEL. key
·
Use to operate other components.
·
§ DISC SKIP key
Use to operate the multi-CD player.
LAST key
Use to operate other components.
·
·
¶ PAGE %/ fi keys
Use to operate the DVD component.
(For Europe and Australia)
·
RDS DISP. key
Use to receive RDS broadcast.
PTY key
ª
º
Use for PTY search.
• ANGLE key
Use to operate the DVD component.
·
∞
ª MUTE key
Use to temporarily mute the sound.
º SOUND key
Use to adjust the sound quality and the ambience effects.
™¢fl
MENU key
Use to operate other components.
·
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Input mode settings
CAUTION
Make sure that the power cord plug is disconnected from the AC wall
outlet before proceeding to connections. Also be sure to disconnect the
power cord plug from the AC wall outlet before changing connections.
For the connections of other system components, see pages 9 to 15.
DVD, VIDEO 1, VIDEO 2, AUX and GAME inputs each include jacks
for digital audio input and analog audio input.
The initial factory settings for audio signal playback for DVD,
VIDEO 1, VIDEO 2, AUX and GAME are full auto.
After completing connections and turning on the receiver, follow the
steps below.
When connecting an associated system component, be sure to read
its instruction manual.
Microcomputer malfunction
INPUT MODE
If operation is not possible or an erroneous display appears, even
Input selector keys
though all connections have been made properly, reset the micro
computer referring to "In case of difficulty".
U
Notes
INPUT SELECTOR
1. Be sure to turn off the system components before connecting them.
2. Be sure to insert every connection cable completely into the jack.
Incomplete connection may result in absence of audio output or
production of noise.
3. Be sure to disconnect the power cord from the AC wall outlet before
inserting or removing a connection cable.
1 Use the INPUT SELECTOR key (or input selector keys)
4. Installation of outdoor antenna is a dangerous work. Please have your
dealer or a specialized technician install it.
to select DVD, VIDEO 1, VIDEO 2, AUX or GAME.
Analog audio connections
2 Press the INPUT MODE key.
Each press switches the setting as follows:
1 "F-AUTO": Auto detect
Audio connections are made using RCA pin cords. These cables transfer
stereo audio signal in an "analog" form. This means the audio signal
corresponds to the actual audio of two channels. These cables usually
have 2 plugs on each end, one red for the right channel and one white for
the left channel.
("AUTO DETECT" indicator lights up)
2 "D-MANUAL": Fixed to digital input
("DIGITAL" indicator lights up)
These cables are to be prepared separately by the user.
3 "ANALOG": Fixed to analog input
*
("AUTO DETECT", "DIGITAL" indicator goes off)
CAUTION
Can not be selected for DTS playback.
*
Be sure to adhere to the following, or proper ventilation will be
blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of
the unit.
Auto detect:
In "F-AUTO (FULL AUTO)" mode ("AUTO DETECT" indicator light
up), the receiver detects the digital or analog input signals
automatically. The receiver will select the input mode and listen-
ing mode automatically during playback to match the type of input
÷ Leave some space around the unit (from the largest outside
dimension including projection) equal to or greater than, shown
below.
signal (Dolby Digital, PCM, DTS) and the speaker setting.
›
The "DIGITAL" indicator lights up when a digital signal is
detected. The "DIGITAL" indicator is extinguished when no
digital signal is detected.
Top panel
Side panel
Back panel
: 50 cm (19-11/16")
: 10 cm (3-15/16")
: 10 cm (3-15/16")
Fixed to digital input:
Select this mode if you want to keep the decoding condition
(Dolby Digital, DTS, PCM, etc.) in the current listen mode.
When "D-MANUAL (DIGITAL MANUAL)" mode is selected, the
set listen modes may be changed automatically depending on the
input signal.
›
Fixed to analog input:
Select this setting to play analog signals from a VCR, etc.
If the INPUT MODE key is pressed quickly, sound may not be
produced. Press the INPUT MODE key again.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting a DVD player
If you have connected a DVD player to the receiver with digital connection, be sure to read the "Input mode settings", "Re-assignment of rear panel jacks"
section carefully. 8™
Monitor TV
COMPOSITE
VIDEO IN
(Yellow RCA pin cord)
S VIDEO IN
(S VIDEO cord)
COMPONENT
VIDEO IN
COMPONENT
VIDEO
OUTPUT
MOONUITTOR
DVD
IN
VIDEO 2
IN
MOONUITTOR
Y
C
B
CR
S VIDEO
VIDEO IN
To AC wall
outlet
COMPONENT
VIDEO INPUT
(ASSIGNABLE)
(
)
VIDEO 2
IN 2
IN 1
(
)
DVD
VIDEO IN
(ASSIGNABLE)
DIGITAL IN
DVD
IN
VIDEO 2
IN
MOONUITTOR
OPT 1
(VIDEO 1) (AUX)
OPT 2
S VIDEO
COAX 2
(VIDEO 2)
Y
C
B
CR
COAX 1
(DVD)
IN
DVD
COMPONENT
VIDEO OUT
S VIDEO OUT
(S VIDEO cord)
AUDIO LINE OUT
or MIX LINE OUT
(Audio cord)
COMPOSITE
VIDEO OUT
(Yellow RCA pin cord)
DVD player
DIGITAL OUT (AUDIO)
(Coaxial cord)
÷ Digital audio connections are required when playing multi-channel signals such as the Dolby Digital and DTS signals.
÷ To play the DVD player connected in this page, select the "DVD" input selector.
£
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components, audio components
Audio components
Connecting video components (COMPONENT VIDEO)
If you have connected the receiver to a video component with
COMPONENT jacks, you can get a better picture quality than by
connecting with the S VIDEO jacks.
AUDIO LINE OUT (Audio cord)
When connecting a video component with COMPONENT jacks,
Monitor TV
see "Re-assignment of rear panel jacks"
™
When connecting the TV to the COMPONENT jacks, be sure to
connect all the other components to the COMPONENT jacks.
L
R
CB IN
IN
MONITOR
AUX
OUT
Y IN
VIDEO IN (Yellow RCA pin cord)
CR IN
Monitor TV
(with component jacks)
COMPONENT
VIDEO
OUTPUT
Y
C
B
CR
VIDEO IN VIDEO OUT VIDEO IN
PLAY IN REC OUT PLAY IN
VIDEO 2
VIDEO 1
COMPONENT
VIDEO INPUT
(ASSIGNABLE)
(
)
VIDEO 2
IN 2
IN 1
(
)
DVD
VIDEO
OUT
(Yellow
RCA pin
cord)
AUDIO
LINE
IN
(Audio
cord)
Y
CB
CR
HDD Recorder, DVD Recorder,
Satellite Receivers & Game
Player (with component jacks)
CR OUT
Video deck, Cassette
deck or MD recorder
AUDIO
VIDEO IN
(Yellow RCA pin cord)
LINE OUT
(Audio cord)
Satellite Receivers
CB OUT
Y OUT
CB OUT CR OUT
DVD player (with component jacks)
AUDIO LINE OUT or MIX LINE OUT (Audio cord)
VIDEO OUT (Yellow RCA pin cord)
Y OUT
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals.
Connect components capable of outputting DTS, Dolby Digital or
PCM (CD) digital signals.
If you have connected components with digital audio output to the receiver
with digital connection, be sure to read the "Input mode settings", "Re-
assignment of rear panel jacks" section carefully. 8™
Connecting video components (S VIDEO)
Use the S VIDEO jacks to make connections to video compo-
nents with S VIDEO IN/OUT jacks.
¶ If you connect a video playback component such as a VCR
through a S VIDEO cord, be sure to use a S VIDEO cord in
connection to the monitor TV.
(ASSIGNABLE)
DIGITAL IN
COAX 2
(VIDEO 2)
OPT 1
(VIDEO 1) (AUX)
OPT 2
DVD
IN
VIDEO 2
IN
MONITOR
OUT
S VIDEO
COAX 1
(DVD)
S VIDEO IN
(S VIDEO cord)
Monitor TV
(with S VIDEO jack)
CD player or DVD player
OPTICAL DIGITAL OUT (AUDIO)
(Optical fiber cord)
Component with DTS,
S VIDEO OUT (S VIDEO cord)
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
OPTICAL DIGITAL
OUT (AUDIO)
Satellite Receivers
(with S VIDEO jack)
Connect the analog audio signals
to the AUX jacks.
(Optical fiber cord)
(See "Connecting video compo-
nents,audiocomponents". 0)
COAXIAL DIGITAL
OUT (AUDIO)
S VIDEO OUT (S VIDEO cord)
Satellite Receivers
(Coaxial cord)
DVD player
(with S VIDEO jack)
Connect the video signal and ana-
log audio signals to the VIDEO 2
jacks.
(See "Connecting video compo-
nents,audiocomponents". 0)
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhib-
ited from the analog stereo outputs of the CD or DVD player. To
enjoy DTS Digital Surround™ playback, this unit must be con-
nected to the digital output of the CD or DVD player.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speakers
CAUTION
Whether each speaker is connected properly can be
confirmed by outputting the test tone and checking if
each speaker channel outputs audio. For details, see
"Speaker settings" (Step 6Adjust the speaker volume
Make sure that the power cord plug is disconnected from the AC
wall outlet before proceeding to speaker cord connections.
If the conductor wires on the extremity of speaker cord are
untwisted, there is a risk of short-circuiting. Be sure to twist
them well before connecting the speaker cord.
level).
)
Protection circuitry
This unit incorporates protection circuitry, which may be activated
during high-power reproduction or in case of extreme rise in tempera-
ture.
When the protection circuitry is activated, the output from this unit is
shut down and the STANDBY indicator blinks.
In this case, turn this unit OFF then ON again and reduce the output
volume level.
Front Speakers
Surround Speakers
Be sure to connect both surround speakers
Right
Left
Surround Back Speaker
Center
Speaker
When the surround back speaker is
connected to these terminals, set
the speaker setting to "BS/SW
BS".
)
In this case, the subwoofer should
be connected to the PRE OUT
Right
Left
SUBWOOFER jack.
$
Subwoofer
When the subwoofer is connected
to these terminals, set the speaker
setting to "BS/SW SW".
)
In this case, two surround back
speakers should be connected to
the PRE OUT SURROUND BACK
jacks.
$
L
R SURR L
CENTER
FRONT
SURR BACK / SW
SPEAKERS (6-8Ω)
R
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speaker terminals
Front
Speaker placement
1 Strip coating.
3 Insert.
Center speaker
Subwoofer
Twist
Surround
speakers
Listening
position
Front
speakers
2 Loosen.
4 Secure.
*Surround Back
*Left speaker
*Surround Back
*Right speaker
*Surround Back speaker
* For Surround Back speaker, you may place either two Surround
Back speakers (Surround Back Left speaker and Surround Back
Right speaker) for 7.1 channel surround sound system or one
Surround Back speaker for 6.1 channel surround sound system.
Center, Surround, Surround back, Subwoofer
1 Strip coating.
3 Insert the cord.
Front speakers : Place the left and right speakers at each side of your
TV. Angle the speakers towards the listening area to enhance the
stereo effect.
Center speaker :Place the center speaker on the center between the
front left and right speakers. Tilt the speaker upward or down-ward
so that it is directly facing the listening area.
Twist
4 Return the lever.
2 Push the lever.
Surround speakers : Place the surround speakers as high as pos-
sible, either directly to the sides of the listening area or else slightly
behind the listening area. Adjust the angles so that these speakers
are facing directly towards the listeners.
Subwoofer : Usually, place the subwoofer in the front center position
in the listening room, near one of the front speakers. (Since the
subwoofer has less directivity than other speakers, it can be placed
almost in any position that can offer the best low frequency
reproduction according to the room layout.)
Surround back speakers : Place the surround back speaker behind
the listening position, at the same height as the left and right
surround speakers.
¶ Never short circuit the + and – speaker cords.
¶ If the left and right speakers are connected inversely or the
speaker cords are connected with reversed polarity, the sound
will be unnatural with ambiguous acoustic imaging. Be sure to
connect the speakers correctly.
Speaker impedance
¶ Although the ideal surround system consists of all the speakers
listed above, if you don't have a center speaker or a subwoofer, you
can divide those signals between the available speakers in the
speaker settings steps to obtain the best possible surround repro-
After confirming the speaker impedance indications printed on the
rear panel of the receiver, connect speakers with matching imped-
ance ratings. Using speakers with a rated impedance other than that
indicated on the rear panel of the receiver could result in malfunctions
duction from the speakers you have available.
*
or damage to the speakers or receiver.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
PRE OUT jacks connections
Connecting to the GAME jacks / FRONT AUX jacks
The receiver has additional PRE OUT jacks.
Note that the output from the PRE OUT jacks needs to be connected
to an external power amplifier.
If you want to connect surround back speakers to these jacks, be always
sure to connect two surround back speakers for the left and right.
If you use a component that you do not usually connect to the receiver,
suchasaportablevideocamera, connectittotheGAME orFRONT AUX
jacks on the front panel of the receiver. These jacks are particularly
convenient when dubbing audio/video from a portable video camera.
INPUT SELECTOR
FRONT AUX
GAME
R
L
SUB
WOOFER SURROUND BACK
PRE OUT
Example:
¶ When you want to connect two surround back
speakers.
¶ When the subwoofer is connected to the
SURR BACK/SW terminals.
Surround Back speakers
OPTICAL
DIGITAL
OUT
L
R
VIDEO
OUT
AUDIO
OUT
Power amplifier
(AUDIO)
VIDEO
OUT
AUDIO
OUT
Example:
¶ When the surround back speaker is connected to
the SURR BACK/SW terminals.
Subwoofer
Camcorder
Power amplifier
Powered subwoofer
Game Player
¶ Connecting a speaker cord directly to a PRE OUT jack will not
¶ The DIGITAL IN (OPTICAL) jack in the GAME jack section can be
produce any sound from the speaker.
used for connection of digital audio input. This is convenient for
playing a video game through the receiver.
¡
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the antennas
Preparing the remote control
The broadcast reception cannot be made unless the antennas are
connected. Connect the antennas correctly as instructed below.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
Loading the batteries
1 Remove the cover.
2 Insert the batteries.
AM antenna terminal connections
1 Push lever.
2 Insert cord.
3 Release lever.
3 Close the cover.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM antenna terminal connections
¶ Insert two AAA-size (R03) batteries as indicated by the
Insert the connector
polarity markings.
Remote control operation
When the STANDBY indicator is lit, the power turns ON when you press
(For the U.S.A. and Canada)
(For Europe and Australia)
the
RECEIVER on the remote control. When the power comes ON,
FM outdoor antenna
press the key you want to operate.
Leadthe75Ω coaxialcableconnectedtotheFMoutdoorantennaintothe
room and connect it to the FM 75Ω terminal.
For the U.S.A. and Canada
Remote sensor
Operating range
(Approx.)
FM indoor antenna
6m (20 ft.)
RECEIVER
For Europe and Australia
Antenna adaptor
FM indoor antenna
¶ When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Attach to
the stand
White
Notes
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
Black
AM loop antenna
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
Use an antenna
adaptor
(Commercially
available)
The remote control unit is designed so that the setup codes stored in
it are saved even after the batteries are removed for replacement.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
FM outdoor
antenna
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Let’s play DVD video software
CAUTION
Make sure that the power cord plug is disconnected from the AC wall outlet before proceeding to speaker cord connections.
If the conductor wires on the extremity of speaker cord are untwisted, there is a risk of short-circuiting. Be sure to twist them well before
connecting the speaker cord.
Connect the speakers, DVD and TV
Connection of TV monitor:
STEP 1
to the receiver.
Component
video connection
S video connection
For details, see "Setting up the system" 8 ~ #
Composite video
connection
Connection of speakers:
COMPONENT
VIDEO INPUT
ASSIGNABLE
L
CENTER
R
SURR
L
COVMIPDOENOENT
OUTPUT
(
)
(VIDEO 2)
IN
IN
2
1
MONITOR
OUT
Y
C
B
CR
VI
D
E
O
IN
VIDEO IN VIDEO OUT VIDEO IN
(DVD)
DVD
IN
VIDEO
IN
2
MONITOR
OUT
DIGITAL IN (ASSIGNABLE)
OPT
(VIDEO 1) (AUX)
ANTENNA
COMPONENT
VIDEO INPUT
ASSIGNABLE
L
CENTER
R
SURR
L
COMPONENT
VIDEO
OUTPUT
FRONT
1
OPT
2
S
VIDEO
R
(
)
COAX
(VIDEO 2)
2
L
(VIDEO 2)
IN
IN
2
1
Y
CB
C
R
L
Y
CB
C
R
MONITOR
OUT
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN
DVD
IN
VIDEO
IN
2
MONITOR
OUT
(DVD)
DIGITAL IN (ASSIGNABLE)
OPT
ANTENNA
FM 75
Ω
GND
AM
FRONT
COAX 1
(DVD)
S
VIDEO
1
OPT
2
SUB
WOOFER
R
COAX
(VIDEO 2)
2
(VIDEO 1) (AUX)
SURR BACK/ SW
-8Ω)
SURROUND BACK
PRE OUT
IN
DVD
PLAY IN REC OUT PLAY IN
VIDEO VIDEO
IN
R
R
L
Y
CB
CR
L
2
1
AUX
SPEAKERS (6
FM 75
Ω
GND
AM
COAX
1
(DVD)
SUB
R
SURR BACK/ SW
-8Ω)
R
SURROUND BACK
PRE OUT
IN
PLAY IN REC OUT PLAY IN
VIDEO VIDEO
IN
WOOFER
SPEAKERS (6
DVD
2
1
AUX
Set up the speakers.
STEP 2
For details, see "Speaker settings" . * ~ ¡
SW
L
R
C
RS LS
BS
SETUP
ON/STANDBY
INPUT SELECTOR
Powered
subwoofer
Front
Speakers
Center
Speaker
Surround
Speakers
Surround Back
Speaker
C
MULTI CONTROL %/fi/@/#,
ENTER
R
L
1Connect the power cord to the AC wall outlet and press the
ON/STANDBY key.
2Press the SETUP key, press the MULTI CONTROL @/ #to
select "SP SETUP" and press the ENTER.
RECEIVER
DVD
RS
LS
SW
BS
If you connect KENWOOD speaker system:
÷ If you want to connect two surround back speakers (LB and RB)
1 PresstheMULTICONTROL@/#toselectthemodelofthe
to the PRE OUT SURROUND BACK jacks, see "PRE OUT jacks
connected speaker system and press the ENTER.
connections".
$
1 "HTB1 6.1CH": Speaker system KS-4200EX*.
2 "HTB1 5.1CH": Speaker system KS-2200HT*.
Connection of DVD player:
3 "HTB2 6.1CH": Speaker system KS-3200HT*+KS-3200EX*,
KS-5200EX*, KS-7200HT*+KS-3200EX*.
For the video input connection from the DVD player and the video
output connection to the TV monitor, connect any one in a pair.
4 "HTB2 5.1CH": Speaker system KS-3200HT*, KS-5200HT*,
KS-7200HT*.
5 "HTB3 6.1CH": Speaker system KS-8200EX*.
Digital audio connection
(Coaxial code)
6 "HTB3 5.1CH": Speaker system KS-8200HT*.
* Model availability may differ depending on the country and
sales area.
Component video
Composite video
connection
connection
÷ When the speaker setting is set to "HTB1 5.1CH", "HTB2
5.1CH" or "HTB3 5.1CH", the DOLBY PRO LOGIC IIx, DTS-ES
and DOLBY DIGITAL EX listen modes cannot be selected.
S video
connection
Analog audio
connection
2 If your selection is correct, press the MULTI CONTROL
% / fi to select "OK" and press the ENTER.
Now the speaker setup is complete. (Select "CANCEL" to
return to the status before setup.)
COMPONENT
VIDEO INPUT
ASSIGNABLE
L
CENTER
R
SURR
L
COMPONENT
VIDEO
OUTPUT
(
)
(VIDEO 2)
IN
IN
2
1
Y
C
B
C
R
MONITOR
OUT
VIDEO IN VIDEO IN VIDEO OUT VIDEO IN
DVD
IN
VIDEO
IN
2
MONITOR
OUT
(DVD)
DIGITAL IN (ASSIGNABLE)
OPT
(VIDEO 1) (AUX)
ANTENNA
FRONT
S
VIDEO
1
OPT
2
COAX
(VIDEO 2)
2
R
L
Y
CB
CR
L
FM 75
Ω
GND
AM
COAX
(DVD)
1
SUB
R
SURR BACK/ SW
-8Ω)
R
SURROUND BACK
PRE OUT
IN
PLAY IN REC OUT PLAY IN
VIDEO VIDEO
IN
WOOFER
SPEAKERS (6
DVD
2
1
AUX
÷ More detailed settings such as the volume level of each speaker and
distance to each speaker are also available. ) ~ ¡
Continued to next page
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Let’s play DVD video software
Example: 7.1 ch Surround System
If you use another speaker system want a setup
according to it:
÷ Connect two surround back speakers (LB and RB) to the PRE
OUT SURROUND BACK jacks, see "PRE OUT jacks con-
nections".
$
1 Press the MULTI CONTROL @/ # to select "CUSTOM"
and press the ENTER to select each of the speaker
setup items.
Subwoofer
: "SUBW"
] "ON"
Front speakers
Center speaker
: "FRNT"
: "CNTR"
: "SURR"
: "BS"
] "LRG"
] "NML"
] "NML"
] "NML"
2 Press the MULTI CONTROL @ / #to select the speaker
setup item.
Surround speakers
Back Surround speakers
BS/SW Amp
Pressthe MULTI CONTROL %/ fi toselectthesettingfor
each item.
: "BS/SW
"
] "OFF
"
Subwoofer
: "SUBW"
]"ON" or "OFF"
Subwoofer re-mix setting : "REMIX"
] "ON"*
Front speakers
: "FRNT"
]"LRG" or "NML"
* When the subwoofer setting is "SUBW ON", front speakers
setting is "FRNT LRG" and a stereo source is played, the low
frequencies may be reproduced through the front speakers and no
audio output from the subwoofer in certain listen modes. In this
case, the low-frequency signal can be output from the subwoofer
by selecting "REMIX ON" for the subwoofer re-mix setting.
÷ When the speaker setting is set to "BS OFF", the DOLBY PRO
LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes cannot
be selected.
Center speaker
: "CNTR"
]"LRG", "NML" or "OFF"
]"LRG", "NML" or "OFF"
]"LRG", "NML" or "OFF"
Surround speakers
: "SURR"
Back Surround speakers : "BS"
BS/SW Amp
: "BS/SW"
] "BS", "SW" or "OFF"
Subwoofer re-mix setting : "REMIX"
]"ON" or "OFF"
"ON" : A subwoofer is connected.
Subwoofer re-mix setting mode to the receiver is ON.
"OFF" : No speaker is connected.
Subwoofer re-mix setting mode to the receiver is OFF.
"LRG" : Relatively large-size speakers.
3 After completing the setup, press the ENTER. If your
selection is correct, press the MULTI CONTROL %/ fito
select "OK" and press the ENTER .
Now the speaker setup is complete. (Select "CANCEL" to
return to the status before setup.)
÷ More detailed settings such as the volume level of each
speaker and distance to each speaker are also avail-
able. ) ~ ¡
"NML" : Normal-size speakers.
"BS" :AsurroundbackspeakerisconnectedtotheSURRBACK/SW
terminals.
"SW"
:
A subwoofer is connected to the SURR BACK/SW terminals.
÷ When the subwoofer is set to "SUBW OFF", the front speaker
is set automatically to "FRNT LRG".
÷ Options "LRG" for the center speaker, surround speakers and back
surround speakers can be selected only when the front speakers
setting is "FRNT LRG". However, when the surround speaker setting
is "SURR NML", option "LRG" for the back surround speakers cannot
be selected.
STEP 3 Play a disc on the DVD player.
1Press the INPUT SELECTOR key to select "DVD".
2Start playback of the DVD player.
For the operation, also refer to the instruction manual for your
Subwoofer re-mix setting
DVD player.
If "REMIX ON" is selected as the subwoofer re-mix setting, the
low frequencies are enhanced by adding the low frequencies of
other channels to the subwoofer channel depending on the
speaker setup.
÷ You can select various listen modes to enjoy surround
playback of various kinds of video software.
›
Example: 5.1 ch Surround System
Subwoofer
: "SUBW"
] "ON"
Front speakers
: "FRNT"
: "CNTR"
: "SURR"
: "BS"
] "LRG"
] "NML"
] "NML
] "OFF"
] "OFF"
] "ON"*
Center speaker
Surround speakers
Back Surround speakers
BS/SW Amp
: "BS/SW"
Subwoofer re-mix setting : "REMIX"
Example: 6.1 ch Surround System
Subwoofer
: "SUBW"
] "ON"
Front speakers
: "FRNT"
: "CNTR"
: "SURR"
: "BS"
] "LRG"
] "NML"
] "NML"
] "NML"
Center speaker
Surround speakers
Back Surround speakers
BS/SW Amp
: "BS/SW
"
] "BS
"
Subwoofer re-mix setting : "REMIX"
] "ON"*
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
2 Use the MULTI CONTROL @/ #(or the @/ #keys) for
the following displays.
Speaker settings
1 "HTB1 6.1CH": Select "HTB1 6.1CH" if you use speaker
system KS-4200EX*.
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, surround and surround back speakers) as described below.
2 "HTB1 5.1CH": Select "HTB1 5.1CH" if you use speaker
system KS-2200HT*.
3 "HTB2 6.1CH": Select "HTB2 6.1CH" if you use speaker system
KS-3200HT*+KS-3200EX*, KS-5200EX* or
KS-7200HT*+KS-3200EX*.
RECEIVER
SETUP
%/fi/@/#, ENTER
4 "HTB2 5.1CH": Select "HTB2 5.1CH" if you use speaker
system KS-3200HT*, KS-5200HT* or KS-7200HT*.
5 "HTB3 6.1CH": Select "HTB3 6.1CH" if you use speaker
system KS-8200EX*.
SOUND ™
RCV MODE
ENTER,
MULTI CONTROL
%/fi/@/#
ON/STANDBY
6 "HTB3 5.1CH": Select "HTB3 5.1CH" if you use speaker
system KS-8200HT*.
7 "CUSTOM": Select to set up the speakers according to
the speaker system in use. (Speaker setup is required
every time after the speaker system is changed.)
8 "EXIT": Press the ENTER again to return to the main
setup displays.
SETUP
1Turn on the power to this receiver by pressing the ON/
*
Model availability may differ depending on the country
and sales area.
STANDBY key (or the RECEIVER ).
÷
When the 5.1 channel speaker system configuration is used
or the speaker setting is set to "BS OFF", the DOLBY PRO
LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes
cannot be selected.
2If you want to use the remote control unit, press the RCV MODE
key on the remote to set it to the receiver control mode.
3Initiate the setup mode.
If you selected "HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH",
"HTB2 5.1CH", "HTB3 6.1CH" or "HTB3 5.1CH" in the above:
Press the ENTER, then press the MULTI CONTROL %/ fi (or
the % / fi keys) to select "OK", and press the ENTER again to
establish the setup.
÷ Select "CANCEL" to return to the status before setup.
÷ When you use a KENWOOD speaker system and select
"HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH", "HTB2 5.1CH",
"HTB3 6.1CH" or "HTB3 5.1CH" set the speaker setup, the
audio will be corrected automatically according to the
speaker characteristics.
1 Press the SETUP key.
2 Use the MULTI CONTROL @/ #(or the @/ #keys) for
the following displays.
1 "SP SETUP"
2 "SP LEVEL"
3 "DISTANCE"
4 "ASSIGN."
5 "LFE LEVEL"
6 "GAME FUNC"
If you selected "CUSTOM" in the above:
Press the ENTER to proceed to detailed setups.
7 "EXIT"
÷ While the main setup screen is displayed, the setup mode
can be canceled by pressing the SETUP key or selecting
"EXIT" and then pressing the ENTER.
The flow of the SETUP is as follows;
SP SETUP
SP LEVEL
AUTO
DISTANCE
ASSIGN.
LEF LEVEL
HTB 1 6.1CH
HTB 1 5.1CH
HTB 2 6.1CH
HTB 2 5.1CH
HTB 3 6.1CH
HTB 3 5.1CH
CUSTOM
4Select the setup method.
L
C
R
GAME FUNC
EXIT
METERS
FEET
EXIT
Digital
D4 Video
EXIT
MODE 1
MODE 2
OFF
SR
BS
(RB/LB)
SL
SW
1 Select "SP SETUP" and press the ENTER to select the
EXIT
Front Left
Subwoofer
Front
Center
speaker setup method.
Front Right
MANUAL/OFF
Center
Right Surround
L
C
Surround
Surround Back
(Right/Left
Surround Back)
Surround
Back
R
Front Left
BS/SW
amp
SR
Subwoofer
B
S
Subwoofer
Re-mix
(RB/LB)
SL
SW
EXIT
÷
The subwoofer setting indication "SUBW" appears.
Continued to next page
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
7 Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
5Select a speaker system.
select the appropriate surround speaker setting.
1 "SURR LRG" :
1 Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
select the appropriate subwoofer setting.
1 "SUBW ON" :
*
Large surround speakers are connected to the receiver.
2 "SURR NML" :
Average size surround speakers are connected to the
receiver.
When a subwoofer is connected.
2 "SUBW OFF" :
3 "SURR OFF" :
When no subwoofer is connected.
When no surround speakers are connected.
÷
÷
The initial setting is "SUBW ON".
When "SUBW OFF" is selected and the selection is estab-
lished by pressing the MULTI CONTROL #(or the #key) in
step 2 below, the front speakers are set automatically to
"FRNT LRG" and the procedure jumps to step 5.
"SURR LRG" cannot be selected when the front speakers
*
have been set to "FRNT NML".
÷
When "SURR OFF" is selected and the selection is estab-
lished by pressing the MULTI CONTROL #in step 8 below,
the procedure jumps to step #. However, if the subwoofer
setting is "SUBW OFF", the procedure jumps to step $ so
that you can complete the speaker setup and proceed to the
speaker volume level adjustment in step 6.
2 Use the MULTI CONTROL # (or the # key) to ac-
cept the setting.
÷
The front speakers setting indication "FRNT" appears.
8 Use the MULTI CONTROL # (or # key) to accept
the setting.
÷
The surround back speaker setting indication "BS" appears.
3 Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
select the appropriate front speakers setting.
1 "FRNT LRG" :
9 Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
select appropriate surround back speaker setting.
1 "BS LRG" :
*
Large front speakers are connected to the receiver.
2 "FRNT NML" :
Large surround back speaker is connected to the re-
ceiver.
Average size front speakers are connected to the
receiver.
2 "BS NML" :
Average size surround back speaker is connected to the
÷
When the subwoofer setting is "SUBW ON", front speak-
ers setting is "FRNT LRG" and a stereo source is played,
the low frequencies may be reproduced through the
front speakers and no audio output from the subwoofer
in certain listen modes. In this case, set the subwoofer
re-mix setting in step # to "REMIX ON" to output the
low frequencies from the subwoofer.
receiver.
3 "BS OFF" :
When no surround back speakers is connected.
"BS LRG" cannot be selected when the surround
*
speaker have been set to "SURR NML".
4 Use the MULTI CONTROL # (or the # key) to ac-
cept the setting.
÷
The center speaker setting indication "CNTR" appears.
5 Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
0 Use the MULTI CONTROL #(or the #key) to accept
select the appropriate center speaker setting.
the setting.
1 "CNTR LRG" :
*
÷
The surround back speaker and subwoofer setting mode
A large center speaker is connected to the receiver.
2 "CNTR NML" :
indication "BS/SW" appears.
An average size center speaker is connected to the
receiver.
3 "CNTR OFF" :
When no center speaker is connected.
"CNTR LRG" cannot be selected when the front
*
speakers have been set to "FRNT NML".
6 Use the MULTI CONTROL # (or the # key) to ac-
cept the setting.
÷
The surround speaker setting indication "SURR" appears.
Continued to next page
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
! Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
select the appropriate BS/SW amp setting.
1 "BS/SW BS":
6Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The volume
levels from each speaker should be the same.
Select this setting when a surround back speaker is
connected to the SURR BACK/SW terminals. In this
case, the subwoofer signal will be output from the PRE
OUT SUBWOOFER jack.
÷ In steps 6, indications appear only for the selected channels of the
speakers that require adjusting.
1 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select "SP LEVEL" on setup displays, and press the
ENTER.
2 "BS/SW SW":
Select when the subwoofer speaker is connected to the
SURR BACK/SW terminals. In this case, the surround
back signals will be output from the PRE OUT SUR-
ROUND BACK jacks.
2 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select "AUTO", "MANUAL" or "OFF".
3 "BS/SW OFF":
1 "AUTO": Select this setting to adjust the speaker volume
levels using the test tone. The test tone will be output from
every speaker channel in automatic sequence.
Select when no speaker is connected to the SURR
BACK/SW terminals. In this case, the subwoofer signal
will be output from the PRE OUT SUBWOOFER jack and
the surround back signals will be output from the PRE
OUT SURROUND BACK jacks.
2 "MANUAL": Select to select the speaker channel to
output the test tone using the MULTI CONTROL@ /
# (or the @ / # keys).
÷
÷
If "BS/SW BS" is selected, only one surround back
speaker can be connected to the receiver.
3 "OFF": Select to adjust the speaker volume levels
using the current output signals. The speaker chan-
nel to output the output signal can be selected using
the MULTI CONTROL@/ # (or the @/ # keys).
4 "EXIT": Press the ENTER again to return to the main
setup displays.
If "BS/SW SW" or "BS/SW OFF" is selected, two sur-
round back speakers can be connected to the PRE OUT
SURROUND BACK jacks through an external power
amplifier.
$
@ Use the MULTI CONTROL #(or the #key) to accept
When"AUTO"or"MANUAL"isselectedandtheENTER
is pressed again, the test tone output will start.
the setting.
÷
The subwoofer re-mix setting indication "REMIX" appears.
Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
adjustthevolumelevelofthetesttoneoutputfromthe
speaker channel to be adjusted.
# Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
select the appropriate subwoofer re-mix setting.
If "REMIX ON" is selected as the subwoofer re-mix setting,
the low frequencies are enhanced by adding the low fre-
quencies of other channels to the subwoofer channel
depending on the speaker setup.
For "AUTO" selection, the first test tone is heard from
the front left speaker for 2 seconds. The next test tone
is heard from the speakers in the following sequence
for 2 seconds each.
1 "REMIX ON" :
When the "BS/SW BS" has been selected :
Subwoofer re-mix setting mode to the receiver is ON.
2 "REMIX OFF" :
Subwoofer re-mix setting mode to the receiver is OFF.
When the "BS/SW SW" or "BS/SW OFF" has been selected:
÷
÷
The initial setting is "REMIX ON".
The subwoofer re-mix setting is possible only when the
subwoofer setting is "SUBW ON" and the front speaker
setting is "FRNT LRG".
The channel indication blinks while the test tone is being output.
$ Press the ENTER. If your selection is correct, press
the MULTI CONTROL %/ fi(or the %/ fikeys) to se-
lect "OK".
÷
When a speaker setup is set to off the volume level for
the corresponding speakers is reset to 0 dB.
Press the ENTER again to return to the main setup
displays.
When "MANUAL" or "OFF" is selected, press the MULTI
CONTROL @/#(or the @/#keys) to select the speaker
channelandthenpresstheMULTICONTROL%/fi(orthe
%/fi keys) to adjust the speaker volume level.
÷
Select "CANCEL" and press the ENTER to return to the
status before setup.
3 PresstheENTERagaintoreturntothemainsetupdis-
plays.
÷
The test tone is turned off and return to the main setup
displays.
Continued to next page
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
7Input the distance to the speakers.
8Adjust the LFE LEVEL (Low Frequency Effects level).
This setting allows the signals output from different speakers to reach
the listening position simultaneously.
Adjust the level of the low-frequency fields effect (LFE) signal, which is
the signal used exclusively for giving the field effect of bass tone, in the
Dolby Digital or DTS signal.
÷ In steps 7, indications appear only for the selected channels of the
speakers that require adjusting.
1 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select "LFE LEVEL" on setup displays, and press the
ENTER.
Measure the distance from the listening position to each
of the speakers.
Jot down the distance to each of the speakers.
2 Use the MULTI CONTROL %/ fi(or the %/ fikeys) to
Distance to Front speaker (L)
:
:
:
:
:
:
:
:
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
adjust the LFE LEVEL.
Distance to Center speaker (C)
Distance to Front speaker (R)
Distance to Surround speaker (RS)
Distance to Surround back speaker (RB)
Distance to Surround back speaker (LB)
Distance to Surround speaker (LS)
Distance to Subwoofer (SW)
÷
The LFE LEVEL is adjusted from 0dB to -10dB in 1dB
step decrements.
3 Press the ENTER again to return to the main setup
1 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select "DISTANCE" on setup displays, and press the
ENTER.
displays.
9Set up the GAME jacks on the front panel.
2 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select the unit and press the ENTER.
1 "METERS"
Perform the setup for convenience of playing a video game using the
receiver.
2 "FEET"
1 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select "GAME FUNC" on setup displays, and press the
ENTER.
3 "EXIT": Press the ENTER again to return to the main
setup displays.
3 Use the MULTI CONTROL @/ #(or the @/ #keys) to
select the speakers and the MULTI CONTROL %/ fi
(or the %/ fikeys) to adjust the distance to the front
speakers.
2 Press the MULTI CONTROL %/ fi(or the %/ fikeys)
to select the game mode.
1
MODE 1
:
"
"
WhentheconnectedgamemachineisturnedON, theinput
selector is switched automatically to "GAME". In addition,
the ACTIVE EQ function is switched to "EQ GAME" and the
listen mode is switched to the appropriate mode for games.
The speaker indicator to be adjusted blinks.
÷
The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
2
3
MODE 2 :
"
"
WhentheconnectedgamemachineisturnedON, theinput
selector is switched automatically to "GAME".
OFF
:
"
"
Indication in meters
The game mode is switched OFF.
÷
The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
÷ The game mode is not activated if no video signal is input to
the VIDEO jack in the GAME jack section.
÷ The game mode is not activated when the DUAL SOURCE
4 Repeat steps 3 to input the distance for each of the
function is switched ON.
¢
speakers.
5 Press the ENTER again to return to the main setup
displays.
3 Press the ENTER again to return to the main setup
displays.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
4 Press the MULTI CONTROL @/#(or the @/#keys) to select
the input jack name and then press the MULTI CONTROL
%/fi(or the %/fi keys) to select the input selector position.
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the "CLIP" indicator
will lights up. Adjust the input level.
Input jack
Input selector
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
2 Press the SOUND key.
When the "DIGITAL" has been selected:
3 Use the MULTI CONTROL @/ #(or the @/#keys) to select
"INPUT", and press the ENTER.
Input jack selection (@/#)
Inputselectorposition(%/fi)
1
2
3
4
COAX1
COAX2
1
2
3
4
DVD
"
"
"
"
"
"
"
"
"
"
"
V2
"
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the input level.
OPT1
V1
"
"
OPT2
AUX
"
"
When the "COMPONENT" has been selected:
Input jack selection (@/#) Inputselectorposition(%/fi)
÷ The adjustment mode is displayed for approximately 20
seconds.
1
2
CPNT1
CPNT2
1
2
3
DVD
"
"
"
"
"
"
"
"
V2
V1
"
"
÷ The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
÷ You can store a separate input level for each input selector.
Use the following table for your memorandum.
Jack name
Assigned input selector
COAX1 (DVD)
5 Press the SOUND key again to return to the input
indication.
COAX2 (VIDEO 2)
OPT1 (VIDEO 1)
OPT2 (AUX)
Re-assignment of rear panel jacks
COMPONENT VIDEO INPUT
IN1 (DVD)
The assignment of the input selector positions to the digital audio and
component video input jacks can be changed as desired.
COMPONENT VIDEO INPUT
IN2 (VIDEO 2)
1 Press the SETUP key.
÷
It is not permitted to assign two input selector positions for
one input jack.
2 Use the MULTI CONTROL @/ # (or the @/ # keys) to
select "ASSIGN."onsetupdisplays,andpressthe ENTER.
5 Repeat step 4 until you have assigned the desired jacks
to the desired input selector positions.
3 Use the MULTI CONTROL @/ # (or the @ / # keys) to
select "DIGITAL"or"COMPONENT",andpresstheENTER.
1 "DIGITAL": Select to change the assignment of the digital
audio input jacks of the receiver.
6 Press the ENTER again to return to the main setup
displays.
2
: Select to change the assignment of the
"COMPONENT"
component video input jacks of the receiver.
3 "EXIT": Press the ENTER again to return to the main
setup displays.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Some preparatory steps are needed before starting playback.
Listening to a source component
RECEIVER
INPUT MODE
RCV MODE
VOLUME %/fi
ON/STANDBY
Input selector keys
INPUT SELECTOR
VOLUME CONTROL
1Press the INPUT SELECTOR key (or the input selector
keys/ DVD, VIDEO 1, VIDEO 2, AUX, F.AUX, GAME, TUNER)
to select the source you want to listen to.
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the ON/
STANDBY
key (or the RECEIVER key).
1 Tuner (FM/AM broadcast reception)
2 "DVD"
3 "VIDEO1"
4 "VIDEO2"
5 "GAME"
6 "FRONT AUX"
7 "AUX"
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 2), OPT 1 (VIDEO 1), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, makesurethattheinputmodesettingiscorrectforthe
type of audio signal to be used.
8
2Start playback from the selected source.
3Use the VOLUME CONTROL knob (or the VOLUME %/fikeys)
to adjust the volume.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Listening with headphones
Adjusting the sound
ACTIVE EQ
DUAL SOURCE VOLUME 5/∞
%/fi/@/#, ENTER
DUAL SOURCE INPUT
VOLUME CONTROL
SOUND
MUTE ∞
VOLUME %/fi
VOLUME CONTROL
RCV MODE
ACTIVE EQ ∞
"DUAL SRC" indicator
PHONES
DUAL SOURCE ON/OFF
MULTI CONTROL %/fi/@/#,
ENTER
1 Connect headphones to the PHONES jack.
Adjusting the TONE (PCM stereo and analog stereo mode only)
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
2 Use the VOLUME CONTROL knob (or the VOLUME %/fi
2 Press the SOUND key.
keys) to adjust the volume.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "TONE", and press the ENTER.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to select
"TONE ON", and press the ENTER.
Playing difference sources through speakers and
headphones (DUAL SOURCE function)
Lights up
While you enjoy audio listening through the speakers, another person
can enjoy another source (audio + video) through headphones by
connecting the source to the GAME or FRONT AUX jacks.
1 Connect headphones to the PHONES jack.
5 Use the MULTI CONTROL @ / # (or the @ / # keys) to
2 PresstheDUALSOURCEON/OFFkeytoswitchtheDUAL
SOURCE function ON.
select "BASS" or "TREBLE".
1 "BASS" :
÷ When the DUAL SOURCE function is ON, the video and head-
phone outputs reproduce only the second input source of the
DUAL SOURCE function.
At this time, the audio from the main source, which is selected
with the input selector, continues to be monitored through the
speakers.
Select this to adjust the low frequency range.
2 "TREBLE" :
Select this to adjust the high frequency range.
6 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the sound quality.
Switching the DUAL SOURCE function OFF restores the main
input source signals to the video and headphone outputs.
Lights up
7 Repeat steps 5 and 6 as required.
÷ The bass and treble levels are adjustable from -10 to +10 in
2 step increments.
3 Press the DUAL SOURCE INPUT key to select the second
input source for the DUAL SOURCE function.
1 "GAME" :
÷ The adjustment item is displayed for approximately 20 sec-
onds.
The "GAME" input is selected as the second input source for
the DUAL SOURCE function.
8 Press the SOUND key again to return to the input
2 "F. AUX" :
indication.
The "F. AUX" input is selected as the second input source for
the DUAL SOURCE function.
4 Press the DUAL SOURCE VOLUME 5 / ∞ to adjust the
headphone listening volume.
÷ When the DUAL SOURCE function is ON, the input mode for the
second input source is fixed at "ANALOG".
The listen mode cannot be changed. 8›
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON.
Press the ACTIVE EQ key for the following selections:
1 "EQ
" : (The "ACTIVE EQ" indicator lights up)
MUSIC
Effective when listening to music.
2 "EQ CINEMA" : (The "ACTIVE EQ" indicator lights up)
Effective when watching a movie.
3 "EQ GAME" : (The "ACTIVE EQ" indicator lights up)
Effective when playing a game.
4 "EQ OFF" : (The "ACTIVE EQ" indicator goes off)
The ACTIVE EQ function is turned OFF.
÷ The ACTIVE EQ function is not available in when the REC
MODE or virtual mode is ON.
Muting the sound
The MUTE key lets you mute the sound of the speakers or headphones.
Press the MUTE key.
Blinks
To cancel
Press the MUTE key again so that the "MUTE" indicator
goes off.
÷ MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob (or pressing the VOLUME %/fi keys).
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Analog sources
INPUT SELECTOR
↓
1 Use the INPUT SELECTOR key (or the input selector key)
to select the source (other than "VIDEO 1") you want to
record.
The display switches automatically.
2 Put the component connected to the VIDEO 1 jacks to the
record-pause mode.
4 Start playback, then start recording.
3 Start playback, then start recording.
÷ Recording may not be normal for some video software. This
is due to the copy guard condition.
Digital sources
Switch on the REC MODE to record a digital input source.
When the digital input source changes during recording in the REC
MODE, the audio signal may be interrupted momentarily.
Recording music in REC mode
When a multi-channel source such as the Dolby Digital or DTS input signal is
recorded in REC mode, the multi channel signal in the current surround mode
can be recorded down-mixed to 2-channel.
÷ DTS 5.1 MUSIC DISC (DTS CD) cannot be recorded.
INPUT SELECTOR
SETUP
1 Use the INPUT SELECTOR key (or the input selector
keys) to select the source ("DVD", "VIDEO 2", "AUX" or
"GAME") you want to record.
2 Put the component connected to the VIDEO 1 jacks to the
record-pause mode.
3 Press and hold the SETUP key for more than 2 seconds
to select the "REC MODE".
1 REC mode off
2 "REC MODE": REC mode on
Multi-channeldigitalsignals(DTSorDolby
Digital) are down-mixed to 2-channel
before being output from the analog
recording (REC OUT) jacks.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System)
stationsandotherstations. TolistentoorstoreRDSstationsinthepresetmemorysee"UsingRDS(RadioDataSystem)(ForEuropeandAustralia)".
ª
Tuning (non-RDS) radio stations
Presetting radio stations
INPUT SELECTOR
RECEIVER
BAND AUTO/MONO
%/fi
TUNING1/ ¡
TUNER, BAND, AUTO/MONO
RCV MODE
MULTI CONTROL %/fi,
INPUT SELECTOR
AUTO/MONO
BAND
ENTER
Collective presetting of stations
(For U.S.A. and Canada)
MULTI CONTROL %/fi,
ENTER
1Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
1Use the INPUT SELECTOR key (or the TUNER key) to select
2Use the BAND key to select he broadcast band to "FM".
3Press and hold the ENTER for more than 2 seconds.
the tuner.
2Use the BAND key to select the desired broadcast band.
Each press switches the band.
The "AUTO" display and "PRESET" display appear alternately.
3UsetheAUTO/MONOkeytoselectthedesiredtuningmethod.
÷ A maximum of 40 stations of the band presently being
received will be preset.
Each press switches the tuning method to either auto or manual tuning.
1 Auto tuning:
÷ Use the Manual Preset function if a desired FM station
cannot be preset using the Auto Preset function or when it
The "AUTO" indicator lights up.
2 Manual tuning:
is required to preset AM stations.
The "AUTO" indicator goes off.
"AUTO" indicator lights up in the display.
Presetting radio stations manually
1Tune to the station you want to store.
2Press the ENTER while receiving the station.
÷
Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4Use the MULTI CONTROL % / fi (or the %/fi keys, TUNING
1/ ¡) to select the station.
"TUNED" indicator is displayed when a
station is received. "ST." indicator lights
when a broadcast is being received in
stereo.
Proceed to step 3 within 20 seconds. (If more than 20
seconds elapse, press the ENTER again).
3Use the MULTI CONTROL % / fi (or the % / fi keys) to select
Auto tuning:
The next station is tuned automatically.
Manual tuning:
Use the MULTI CONTROL % / fi (or the %/fi keys) to select
the desired station.
one of the station presets (1 – 40).
4Press the ENTER again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old
station will be replaced by the new one.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Receiving preset stations
Receiving preset stations in order (P.CALL)
Numeric keys
P.CALL 4/¢
TUNER
TUNER
INPUT SELECTOR
INPUT SELECTOR
MULTI CONTROL @ /#
1Use the INPUT SELECTOR key (or the TUNER key) to select
tune as the source.
1Use the INPUT SELECTOR key (or the TUNER key) to select
tune as the source.
2Enter the number of the preset station you want to receive
2Use the MULTI CONTROL @ / # (or the P.CALL 4/ ¢ keys)
(up to "40").
to select the desired station.
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
• Each time you push the Joystick, another preset station is
received in order.
Pushing the Joystick to # does the following:
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
Pushing the Joystick to @ does the following:
Holding the Joystick on # or @ direction, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using RDS (Radio Data System) (For Europe and Australia)
3Press the ENTER key continuously for more than 2 seconds
Before using a function utilizing the RDS, be sure to perform the RDS
Auto Memory operation by referring to the description in "Presetting
RDS stations (RDS AUTO MEMORY)".
will start AUTO MEMORY.
RDS is a system that transmits useful information (in the form of digital
data) for FM broadcasts along with the broadcast signal. Tuners and
receivers designed for RDS reception can extract the information from
the broadcast signal for use with various functions, such as automatic
display of the station name.
The "AUTO" display and "MEMORY" display appear alternately.
• After a few minutes, up to 40 RDS stations are preset in
order from channel "01".
• Stations already stored in the preset memory may be replaced by
RDS stations. (i.e., If the RDS AUTO MEMORY function detects
15 RDS stations, the stations currently preset at numbers 01~15
will be replaced by the RDS stations.)
RDS functions:
PTY (Program TYpe Identification) Search
º
Automatically tunes to a station that is currently broadcasting the
specified program type (genre).
PS (Program Service Name) Display
Automatically displays the station name transmitted by the RDS
station.
Using the RDS DISP. (Display) key
RDS AUTO MEMORY function
Automatically selects and stores up to 40 RDS stations in the preset
memory.
If fewer than 40 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.
RDS DISP.
Radio Text function
Displays the radio text data transmitted by some RDS stations when
you press the RDS DISP. (display) key. There is "NO RT" if no text data
is transmitted.
TUNER
The "RDS" indicator lights up when an RDS broadcast (signal) is
received.
Pressing the RDS DISP. key changes the contents of the display.
Each press switches the display mode as follows :
1 PS (Program Service name) display
2 RT (Radio Text) display
Note
Some functions and function names may differ for certain countries
and areas.
3 Frequency display
1 PS (Program Service name) display :
The station name is displayed automatically when an RDS
broadcast is received.
Presetting RDS stations (RDS AUTO MEMORY)
If no PS data was sent, "NO PS" is displayed.
This function automatically stores up to 40 RDS stations in the preset
memory. In order to use the PTY function, the RDS stations must be
stored in the preset memory using the RDS Auto Memory function.
2 RT (Radio Text) display :
Text data accompanying the RDS broadcast scrolls across
the display. "NO RT" or "RT
----" is displayed if the
current RDS station does not provide RT data.
TUNER
BAND
INPUT SELECTOR
ENTER
3 Frequency display :
Displays the frequency of the current station.
1Use the INPUT SELECTOR key (or the TUNER key) to select
tuner as the source.
2Use the BAND key to select the broadcast band to "FM".
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using RDS (Radio Data System) (For Europe and Australia)
3Press the PTY key to start searching.
Tuning by Program TYpe (PTY search)
Example: Searching for a Pop Music broadcast.
This function lets you set the tuner to automatically search for stations
which are currently broadcasting the type of program (genre) you want
to listen to.
Display while searching.
Blinks
Under certain receiving conditions, it may take more than 1
minute to complete the search.
Program type name display
Preparations
• Execute the RDS auto memory procedure.
Display when a station is received.
Goes out
• Set the broadcast band to FM.
Station name display
• No sound is heard while "PTY" is blinking.
PTY
• If the desired program type cannot be found, "NO PROG" is
displayed, then after several seconds the display returns to the
original display.
%/fi
TUNING 1/¡
To select another program type.
BAND
Repeat steps 1, 2and 3.
1
Press the PTY key to activate the PTY search mode.
Lights up
When an RDS broadcast is received, the program type is shown on the
display. If no PTY data is available, or if the station is not an RDS
station, "NONE" is displayed.
2
While the "PTY" indicator is lit, use the %/ fikeys (or the
TUNING 1/ ¡keys) to select the program type of your
choice.
Program type table
Program Type Name Display
Program Type Name Display
Pop Music
Rock Music
Easy Listening Music
Light Classical Music
Serious Classical Music CLASSICS
POP M
Weather
Finance
WEATHER
FINANCE
ROCK M
EASY M
LIGHT M
Children’s Programmes CHILDREN
Social Affairs
Religion
Phone In
Travel
SOCIAL
RELIGION
PHONE IN
TRAVEL
Other Music
News
OTHER M
NEWS
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied Speech
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
Leisure
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
FOLK M
DOCUMENT
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
This receiver is equipped with listening modes that allow you to enjoy an
enhanced sonic ambience with a variety of video sources.
Dolby PRO LOGIC IIx/ Dolby PRO LOGIC II
Dolby Pro Logic IIx was designed specifically to provide a new sense
of spatiality, directionality and articulation of sounds from Dolby
Surround encoded sources.
In order to obtain the optimum effect from the surround modes, make
sure to input the proper speaker settings beforehand.
*
Thisisachievedwithanintelligent,built-infeedbacklogicdesign,amatrix
surround decoding and the decoding of stereo, full bandwidth surround
outputs. The PRO LOGIC IIx modes programmed into this receiver are
Surround modes
"MOVIE","MUSIC"and"GAME".The"MOVIE"modeofthePROLOGIC IIx
has preset characteristics to produce a calibrated, high-level surround
sound playback while the "MUSIC" mode has user-adjustable character-
isticstoofferthethreeoptionalcontrols,like"Dimension","CenterWidth"
and "Panorama" modes to allow optimization of the soundfields as
desired. The "Dimension" control allows the user to gradually adjust the
soundfield either towards the front or towards the rear; the "Center
Width" control allows various adjustment of the left-center-right speak-
ers’ balance; the "Panorama" mode extends the front stereo image to
include the surround speakers for an exciting "wraparound" effect with
R
L
(Front speakers)
(Center speaker)
(Subwoofer)
C
SW
RS(Surround speakers)
RB
LS
sidewallimaging.The"GAME"modeisdesignedforplayingvideogames
and enhances the powerful feeling of sound.
or LB
BS
(Surround back speakers)
Dolby
C
L
R
PRO LOGIC IIx
SW
LB
Dolby Digital EX
LS
RS
Dolby Digital EX is an extension of Dolby Digital technology, Dolby
Digital EX creates six full-bandwidth output channels from 6.1-chan-
nel sources. This is done using a matrix decoder that derives three
surround channels from the two in the original recording.
This is achieved by using three different surround signals, Left
Surround , Right Surround, and Back Surround, each driving its own
array of speakers. Think of it as adding a center channel for the rear
speakers, which give more diffuse and natural surround effect, even
if you wanted the ability to completely encircle the audience with
sound, positioning sound effects exactly where they would be heard
in real life.
RB
Dolby
C
L
R
PRO LOGIC II
SW
LS
RS
Note
For best results, Dolby Digital EX should be used with movie
soundtracks recorded with Dolby Digital Surround EX which contain
a digital flag that will automatically activate this feature. However, for
titles released prior to late 2001, this feature has to be activated
manually.
Dolby Digital
Dolby Digital surround format lets you enjoy up to 5.1 channels of
digital surround sound from Dolby Digital program sources (such as
Laserdisc or DVD software marked
). Compared with previous
This model lets you enjoy Dolby Digital (and Dolby Surround) program
sources, even if you connect only the Front Speakers. However, in
order to enjoy the benefit of true 6.1 channel Dolby Digital Surround
EX sound, KENWOOD recommends that you connect a full set of
speakers.
Dolby surround, Dolby Digital provides even better sound quality,
greater spatial accuracy, and improved dynamic range.
This model lets you enjoy Dolby Digital (and Dolby Surround) program
sources, even if you connect only the Front Speakers. However, in
order to enjoy the benefit of true 5.1 channel Dolby Digital surround
sound, KENWOOD recommends that you connect a full set of
speakers.
C
L
R
SW
LB
C
L
R
LS
RS
SW
LS
RS
RB
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DTS-ES
DTS
The DTS-ES (Digital Theater System-Extended Surround) represents
6.1-channel Discrete Surround format, expanding upon 5.1 surround.
DTS-ES format is a 6.1 channel sound system for movie theaters that
includes an additional surround center channel matrixed within sur-
round left and surround right. It’s compatible on predecessor DTS 5.1
system. The extra channel allows more accurate placement and
steering of sound across the rear soundstage. The DTS-ES receiver
will be required, to experience a discrete 6.1-channel mix.
The DTS-ES decoders used in home cinema systems have decoding
options for utilizing the extra channel, in addition to processing
existing 5.1 channel surround sound :
The DTS employs a larger amount of data than Dolby Digital to play
surround sound with higher quality. The DTS can be used with DVD
and LaserDisc software carrying the
mark. Although the number
of channels is 5.1 and identical to Dolby Digital, the DTS format
features lower audio compression rate in digital recording, which
enables audio with more profoundness and higher S/N. The wider
dynamic range and better channel separation also contribute to make
the surround sound more precise and larger in scale.
DTS-ES Discrete 6.1 and DTS-ES Matrix 6.1 add the surround back
channel audio to the DTS 5.1-channel format to improve the acoustic
positioning and makes acoustic image movement more natural with
C
the 6.1-channel reproduction.
L
R
SW
C
L
R
SW
LB
LS
RS
LS
RS
RB
NEO:6
DSP mode
NEO:6 is a new technology which decodes 2-channel signals into
6-channel signals using high-accuracy digital matrix technology.
For the best results, DTS-ES should be used with movie sound
tracks recorded with DTS-ES format which contain a digital flag
that will automatically activate this feature. However, for some
titles, this feature has to be activated manually.
Accordingtothesignalstobeplayedback, DTSNEO:6useseither
the NEO:CINEMA mode optimized for movie playback or the
NEO:MUSIC mode optimized for music playback.
The DSP mode lets you add the atmosphere of a live concert or hall
to almost any type of program source. These modes are particularly
effectivewhenusedwithstereoprogramsources, likeCD, television,
and FM radio. You might enjoy trying the ARENA, JAZZ CLUB,
THEATER, STADIUM or DISCO mode the next time you watch a
concert or sporting event!
C
C
L
R
L
R
SW
LB
SW
LB
LS
RS
LS
RS
RB
RB
What's DSP?
DSP stands for Digital Signal Processor.
The way a sound is heard in an actual environment depends on a
varietyofdifferentfactors. Oneofthemostimportantisreverberation
(the act of decaying elements of sound echoing in various places).
The DSP modes produce the feeling of presence by using the DSP to
create reverberation, without spoiling the sound quality of the original
signal.
DTS 96/24
The DTS 96/24 enables 5.1-channel playback with broad bandwidth
over 40 kHz and high resolution without affecting the picture quality
of DVD video. As it is compatible with the DTS surround playback, it
makes it possible to play DTS 5.1-channel surround audio even when
the AV amplifier incorporates only the DTS or DTS-ES decoder.
C
L
R
SW
LS
RS
LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep bass
sound effects.
When there is a LFE channel input in the DOLBY DIGITAL or DTS
format, the "LFE" indicator lights on the display of the receiver.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Virtual modes
Dolby Virtual Speaker
The Dolby Virtual Speaker features a virtual surround sound field.
This implements an effect as if there are multiple speakers in the
listening room.
The following modes allow you to enjoy powerful surround audio even
when you use only two speakers or listen through headphones.
÷ The desired listen mode may be unable to be selected depending on the
reproduced signals.
›
C
L
R
DOLBY VIRTUAL
"Dolby H" indicator
LS
RS
PHONES
Dolby Headphone
When headphones are used in music listening, the audio of the left (or
right)channelreachesonlytheleft(orright)yearsothelistenercannot
feel the presence of acoustic images on the front.
The Dolby Headphone simulates a virtual room and include its
acoustic characteristics in the left and right headphone signals. As a
result, the listener can hear the same components as in speaker
listening through the left and right years and therefore feel as if the
sound source is located on the front of the listener.
How to set the Dolby Virtual Speaker mode
(when not using headphones):
PresstheDOLBYVIRTUALkeyforthefollowingselections:
1 "DVS WIDE" :
The virtual surround effect can be
Lights up
given added expansion and spatial
feeling.
2 "DVS REF" : *
Standard setting.
3 "DVS OFF" : Cancel
*
This mode can be selected only when the surround speaker
setting is OFF.
How to set the Dolby Headphone mode
(when using headphones):
PresstheDOLBYVIRTUALkeyforthefollowingselections:
1 "DH 1":
Monitor room in a studio with small
amount of reverberations.
Lights up
2 "DH 2":
General listening with optimum
amount of reverberations.
3 "DH 3":
Wide space such as a movie theater.
4 "OFF": Cancel
÷ The DolbyVirtualSpeaker or Dolby Headphone mode is defeated when
the DUAL SOURCE mode or REC MODE is ON.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro
Logic”, “Surround EX” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS”, “DTS-ES Extended Surround”,
“Neo:6” and “DTS 96/24” are trademarks
of Digital Theater Systems, Inc.
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Surround play
Listen modes available with Dolby Digital EX or Dolby Digital
playback: ("Dolby D" indicator lights up)
The desired listen mode can be selected according to the input signal.
Main example of medium:
Multi-channel digital source such as DVD.
INPUT MODE
Input selector keys
1 "DOLBY D":
DOLBY DIGITAL surround
2 "DOLBY D EX":
LISTEN MODE %/fi
STEREO fi
DOLBY DIGITAL EX surround
3 "DOLBY D + PLIIx MOVIE":
DOLBY DIGITAL surround +
DOLBY PRO LOGIC IIx surround MOVIE mode *1
4 "DOLBY D + PLIIx MUSIC":
DOLBY DIGITAL surround +
DOLBY PRO LOGIC IIx surround MUSIC mode
5 "STEREO":
"Dolby D" indicator
"DTS" indicator
INPUT SELECTOR
LISTEN MODE
Preparations
Stereo playback*2
÷ Turn ON related components.
÷ Complete "Preparing for playback" (Speaker settings).
*
*1 Can be selected only when two surround back speakers are con-
nected.
÷ Use the INPUT SELECTOR key (or input selector keys) to select
the component you wish to play back with surround sound.
÷ Use the INPUT MODE key to select the input mode (analog
*2 In Dolby Virtual Speaker and Dolby Headphone modes, the Dolby
Digital signal input cannot be listened to in the stereo mode.
or digital) for the source you wish to play back.
8
÷ You can also adjust the midnight mode as desired.
°
÷ Noise will be produced when a DTS source is played by
selecting the analog input.
Listen modes available with DTS, DTS-ES (Matrix or Discrete)
or DTS-96/24 playback: ("DTS" indicator lights up)
1Start playing the video software.
Main example of medium:
2PresstheLISTENMODEkey(ortheLISTENMODE%/fikeys)
Multi-channel digital source such as DVD.
to select the listening mode.
The listening mode settings are stored separately for each input
1 "DTS":
DTS surround
selector.
2 "DTS + NEO6 CINEMA":
DTS surround + DTS NEO:6 surround CINEMA mode
3 "DTS-ES MATRIX 6.1":
DTS-ES 6.1-channel Matrix surround *1
4 "DTS-ES DISCRETE 6.1":
DTS-ES 6.1-channel Discrete surround *2
5 "DTS 96/24":
If the input mode is set to full auto ("AUTO DETECT" lights), this
model selects the optimal listening mode automatically based on the
type of input signal and the speaker settings.
Each press the LISTEN MODE key (or the LISTEN MODE
%/fi keys) switches the setting as listed below.
The listening mode settings are different depending on
the type of input signal.
DTS 96/24 surround *3
6 "STEREO":
Stereo playback *4
*1 Can be selected only with DTS-ES 6.1ch Matrix Surround.
*2 Can be selected only with DTS-ES 6.1ch Discrete Surround.
*3 Can be selected only with DTS 96/24 Surround.
*4 In Dolby Virtual Speaker and Dolby Headphone modes, the DTS
signal input cannot be listened to in the stereo mode.
÷ You can also adjust the midnight mode as desired.
°
Continued to next page
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Dolby Digital Surround EX compliant disc :
Listen modes available with analog or PCM playback:
Dolby Digital Surround EX compliant disc contains identification signals.
When you choose FULL AUTO during "Input mode settings" (8), this
amplifier detects the identification signals and change the LISTEN mode to
the DOLBY DIGITAL EX (Dolby Digital Surround EX mode) automatically.
But sometimes we find some discs which are Dolby Digital Surround EX
compliantdiscbutitdoesnotcontaintheidentificationsignals.Ifyoufindthe
notice like “Surround EX” on the label of disc or package, you can choose
DOLBY DIGITAL EX, then you can enjoy Dolby Digital Surround EX sound.
Main example of medium:
Digital sources including DVD 96 kHz linear PCM and CD.
Analog source such as VCR or radio broadcasting.
1 "PL IIx MOVIE":
DOLBY PRO LOGIC IIx surround MOVIE mode *1
2 "PL IIx MUSIC":
DOLBY PRO LOGIC IIx surround MUSIC mode *1 *2
3 "PL IIx GAME":
Switching the listen mode temporarily to the stereo mode
DOLBY PRO LOGIC IIx surround GAME mode *1
4 "PL II MOVIE":
Press the STEREO key to switch the current listen mode temporarily to the
Stereo mode. Pressing the key again restores the original listen mode.
÷ The original listen mode is also restored when the input selector is
switched or the receiver is turned OFF then ON again.
DOLBY PRO LOGIC II surround MOVIE mode
5 "PL II MUSIC":
DOLBY PRO LOGIC II surround MUSIC mode *2
6 "PL II GAME":
DOLBY PRO LOGIC II surround GAME mode *3
7 "PRO LOGIC":
DOLBY PRO LOGIC surround
8 "NEO6 CINEMA" or "NEO6 96K CINEMA":
DTS NEO:6 surround CINEMA mode
9 "NEO6 MUSIC" or "NEO6 96K MUSIC":
DTS NEO:6 surround MUSIC mode *1 *4
0 "ARENA":
DSP surround ARENA mode *5
- "JAZZ CLUB":
DSP surround JAZZ CLUB mode *5
= "THEATER":
DSP surround THEATER mode *5
~ "STADIUM":
DSP surround STADIUM mode *5
! "DISCO":
DSP surround DISCO mode *5
@ "STEREO":
Stereo playback.
*1 Cannot be selected in Dolby Virtual Speaker and Dolby Headphone
modes.
*2 The sound field can be adjusted as desired using the PANORAMA,
DIMENSION and CENTER WIDTH modes.
‡
*3 Cannot be selected in Dolby Virtual Speaker modes.
*4 ThesoundfieldcanbeadjustedasdesiredusingtheCENTERIMAGE
modes.
°
*5 Cannot be selected in Dolby Virtual Speaker and Dolby Headphone
modes or with a 96 kHz linear PCM signal input.
The effect level of the DSP surround mode can be adjusted as
desired.
fl
3Adjust the volume.
Notes
÷ Certain modes may be unavailable depending on the type of input
signal or speaker setting.
÷ If an optimum surround effect cannot be obtained or the desired
mode cannot be selected, check the speaker and input mode
settings. 8*
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient functions
You can make further adjustments to the sound while listening to
playback in the surround mode.
÷ The mode using the SOUND key is defeated when the REC MODE is
Adjusting the volume level of each channel
ON.
§
The volume levels of the center speaker, subwoofer, surround speaker
and surround back speaker channels can be adjusted during playback.
DIMMER °
SLEEP °
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
%/fi/@/#, ENTER
2 Press the SOUND key.
SOUND
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "SP LEVEL" on setup displays, and press the
ENTER.
LISTEN MODE %/fi
RCV MODE
INPUT SELECTOR
4 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select the speaker.
1 Subwoofer level adjustment ("SW" indicator blinks)
2 Center speaker level adjustment ("C" indicator blinks)
3 Surround speaker level adjustment ("LS", "RS" indicator
blinks)
MULTI CONTROL %/fi/@/#,
ENTER
Adjusting the sound
4 Surround back speaker level adjustment ("LB", "RB" or
"BS" indicator blinks)
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
5 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the speaker volume level.
2 Press the SOUND key.
3
PresstheMULTICONTROL@/#(orthe@/#keys)toselect
the setting item and press the ENTER.
Note that some items are not displayed in certain modes.
1 "SP LEVEL": *1
Adjusting the volume level of each channel
÷ The level of each speaker channel can be adjusted in 1 dB
2 "INPUT": (Analog mode only)
Input level adjustment
3 "TONE": *2
Tone level adjustment
4 "EFFECT": (DSP mode only)
DSP effect level adjustment
5 "DUAL MONO": *3
™
¢
steps between -10 dB and +10 dB.
6 Repeat steps 4 and 5 as required.
7 Press the SOUND key again to return to the input
indication.
‡
÷ The setting in the SOUND mode is temporary. It returns automati-
cally to the original level set in "Speaker settings" when the
Selection between Stereo, Main audio, Sub audio and
Main + Sub audio
receiver is turned OFF/ON.
*
6 "MIDNIGHT": *4
°
‡
‡
‡
°
Midnight mode adjustment
7 "PANORAMA": *5
Panorama mode ON/OFF
8 "DIMENSION": *5
Dimension adjustment
9 "C WIDTH": *5
Center width adjustment
0 "C IMAGE": *6
Center image mode adjustment
Adjusting the DSP effect level (DSP mode only)
The DSP effect level can be adjusted when the listen mode is a DSP surround
mode "ARENA", "JAZZ CLUB", "THEATER", "STADIUM" or "DISCO".
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
*1 ThesettingintheSOUNDmodeistemporary. Itreturnsautomati-
cally to the original level set in "Speaker settings" when the
2 Press the SOUND key.
receiver is turned OFF/ON.
*
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "EFFECT" on setup displays, and pressthe ENTER.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the EFFECT LEVEL.
*2 PCM stereo and analog stereo mode only.
*3 DOLBY DIGITAL mode only
*4 DOLBY DIGITAL, DTS mode only
*5 Onlywhentheinputsignalisa2-channelsignalintheDOLBYPRO
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.
*6 Only when the input signal is a 2-channel signal in the DTS
NEO:6 MUSIC mode.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the setting as desired.
÷ The adjustment item is displayed for approximately 20 seconds.
÷
The DSP effect level can be adjusted in the range between 1 and 5.
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient functions
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
Switching between main audio and sub audio
(DOLBY DIGITAL mode only)
adjust the soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
When listening to audio multiplex broadcasting such as two-language
satellite digital broadcasting, the main and sub audio can be switched over.
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
↓
2
PresstheSOUNDkeywhilethe"DUALMONO"indicatorislit.
Standard setting.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "DUAL MONO" on setup displays, and press the
ENTER.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
select the audio.
↓
1 "MAIN": The main audio is output.
2 "SUB": The sub audio is output.
3
Soundfield is adjusted towards the rear.
"MAIN+SUB":Themixtureofmainaudioandsubaudioisoutput.
4 "STEREO": The left channel outputs the main audio and the
right channel outputs the sub audio.
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
Center Width mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode)
÷ If the audio multiplex broadcasting is not monaural, the audio cannot
be switched on this receiver. In this case, use the audio switching
function on the tuner.
Center width adjustment allows you to enjoy an enhanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
Panorama mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode)
When listening to music, you will be able to enjoy the "wraparound"
2 Press the SOUND key.
sound effect when you adjust the panorama mode.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
2 Press the SOUND key.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "PANORAMA" on setup displays, and press the
ENTER.
select"CWIDTH"onsetupdisplays,andpressthe ENTER.
÷ When the center speaker is switched OFF, "CWIDTH" cannot
be selected.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the left-center-right output.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
select PANORAMA mode "ON" or "OFF".
Center image will be heard from center speaker only.
Center image will be heard from left and right speakers only.
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
Dimension mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode)
÷ When in other position, center image from center speaker,
left and right speakers can be heard simultaneously with
various combinations.
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
2 Press the SOUND key.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "DIMENSION" on setup displays, and press the
ENTER.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient functions
Display dimmer adjustment
Center Image mode (Only when the input signal is a 2-channel
signal in the DTS NEO:6 MUSIC mode.)
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
In the CENTER IMAGE setting mode of the NEO:6 MUSIC listen mode,
it is possible to enhance the center channel audio by adjusting the center
signal component.
Each time you press the DIMMER key, the display’s brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
1 Bright
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
2 Dark
2 Press the SOUND key.
3 Dark (LEDs on the receiver are also OFF.)
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "C IMAGE" on setup displays, and press the
Sleep timer
ENTER.
÷ When the center speaker is switched OFF, "CIMAGE" cannot
be selected.
The sleep timer function turns the receiver OFF (to the standby mode)
automatically when the set timer period has elapsed. The sleep timer
period can be set in 10-minute steps up to 90 minutes.
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
adjust the left-center-right output.
Press the SLEEP key repeatedly until the desired period before
turning the receiver OFF (standby mode) is displayed.
÷ Each press increments the sleep timer period by 10 minutes.
10 = 20 = 30 .....70 = 80 = 90 = Cancel = 10 = 20 = ...
÷ Adjust the center component level.
The sleep timer indicator lights up
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
Midnight mode (DOLBY DIGITAL and DTS mode only)
When watching movies at night , you might not be able to raise the volume
as loud as normal. Midnight mode compresses the dynamic range of
previously specified parts of the DOLBY DIGITAL or DTS sound track (like
scenes with sudden increases in volume) to minimize the difference in
volume between the specified and non-specified parts. This makes it easy
to hear all of the sound track, even when listening at low volumes.
÷ Pressing the SLEEP key after the sleep timer has started
allows you to check the remaining time period.
÷ To cancel the sleep timer, turn the receiver OFF (standby
mode) or press the SLEEP key repeatedly until the Sleep
timer indicator disappears.
1 Press the RCV MODE key on the remote control unit to
set it to the receiver control mode.
2 Press the SOUND key.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to
select "MIDNIGHT" on setup displays, and press the
ENTER.
÷ This can be selected only if DVD, VIDEO 1, VIDEO 2, AUX
or GAME is selected as the source and the listen mode is set
to "DOLBY DIGITAL" or "DTS".
4 Use the MULTI CONTROL % / fi (or the % / fi keys) to
select the "MIDNIGHT2", "MIDNIGHT1" or "OFF" setting.
1 "MIDNIGHT2": Large effect
Suitable for late-night use.
2 "MIDNIGHT1": Medium effect
3 "OFF"
÷ The adjustment item is displayed for approximately 20 sec-
onds.
÷ Some DOLBY DIGITAL or DTS software may not be compat-
ible with the Midnight mode.
5 PresstheSOUNDkeyagaintoreturntotheinputindication.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
The remote control supplied with this receiver is also capable of
controlling components from a variety of manufacturers once you
register the appropriate setup codes into the remote control unit.
3Press and hold the REMOTE SETUP key until the LED blinks
twice, then release the REMOTE SETUP key.
÷ Proceed to the next steps in less than 10 seconds after the LED
blinks twice.
Low battery warning
4Press the numeric key to enter the four-digit code for the
component to be registered.
Replacealltwobatterieswithnewoneswhenyounoticeashortening
of the distance from which the remote control will operate. The
remote control is designed to retain setup codes in memory while you
change batteries.
÷ The LED blinks twice when registration is completed successfully.
5Ensure that the registered component functions properly.
To ensure the proper function, perform the following operation
and check if the component functions as intended.
Registering setup codes for other components
Point the remote control unit to the component and press the
SOURCE key (or the TV key if the component is a TV) once. If the
setup code is registered properly, the component should be turned ON
or OFF. If the component is a VCR, turn the VCR ON and load a video
tape and perform an operation such as playback. The VCR should
function as controlled if its setup code is registered properly.
If the component does not function properly:
When the setup code defined for remote control of every system
component is registered in one of the input selector keys of the remote
control unit, you can control that component simply after selecting it
using the corresponding input selector key of the remote control unit.
÷ When recording audio on a VCR or MD recorder, for example, you can
also control the system component by switching only the remote
If more than one setup code is listed for the component, try
registering another setup code by performing steps 3to 5.
÷ Repeat steps 1 to 5 above to register the setup code of
another component.
÷ To change the registered setup code, register a new setup
code again by performing steps 1 to 5 above.
control unit, without switching the input source of the receiver.
SOURCE
LED
Numeric keys
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certaincodesmayonlyoperatesomeofthefunctionsavailable
on a given model.)
Input selector keys
TV MODE
REMOTE SETUP
Searching for your code
If your component does not respond after trying all the codes listed for
your component, or if your component is not listed at all, try searching for
your code.
1
2
Find the setup code of the component to be registered.
Refertothesetupcodeliststofindthesetupcodeforthecomponent
to be registered. qr
Example: To register a DVD made by KENWOOD, you would enter
"0490" or "0534".
For example, to search for a code for your TV.
1Press the TV MODE key once.
When searching for the setup code of a component other than TV:
Press the desired input selector key instead of the TV MODE key.
Press the input selector key (DVD, VIDEO 1, VIDEO 2, AUX, F.AUX,
GAME or TV MODE) you want to register a system component.
The following table shows the type of components that can be
registered in each input selector key.
2Press and hold the REMOTE SETUP key until the LED blinks
twice, then release the REMOTE SETUP key.
÷ Proceed to the next steps in less than 10 seconds after the LED
blinks twice.
Input jacks
3Press the numeric key to enter "9 9 1".
÷ The LED will blink twice.
Input selector
key
where the
component is
connected
Registerable component
4Point the remote control at the TV and slowly alternate
DVD
DVD player
VCR
DVD
between pressing the TV and TV MODE keys. Stop when
the TV turns on or off.
÷ In the search mode, the remote control will send IR codes
from its library to the selected device, starting with the most
popular code first.
VIDEO 1
VIDEO 2
VIDEO1
VIDEO2
Cable Converters
Satellite Receivers
CD player,
AUX
AUX
recorder (KENWOOD)
MD
When searching for the setup code of a component other than TV:
To search for the setup code of a DVD, CD, MD or VCR, press the
input selector key pressed in 1and the SOURCE key alternately
and check if the component to be registered is turned ON and OFF.
To search for the setup code of a VCR, turn the VCR ON, load a tape
and press the input selector key pressed in step 1 (i.e. VIDEO1) and
an operation key such as the play key alternately and check if the VCR
is controlled as intended.
F. AUX
Game player (Default: Xbox),
DVD player
FRONT AUX
GAME
Game player (Default: Play
Station2), DVD player
GAME
TV MODE
TV (including TVs
incorporating VCR)
-
5Press the REMOTE SETUP key once to lock in the code.
÷ Make sure that a source belonging to the registerable component
is connected to the corresponding input jacks on the receiver.
÷ A second DVD recorder, CD player or VCR can also be connected
by changing the assignment of the registerable component de-
vices. See "Re-assigning device keys" on page 40.
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Checking the codes
Operating other components
The 4-digit setup codes registered in the input selector keys can be
checked as follows.
This operation lets you operate the registered components.
SOURCE
1Press the input selector key in which the setup code of the
desired component is registered.
2Press and hold the REMOTE SETUP key until the LED blinks
twice, then release the REMOTE SETUP key.
÷ Proceed to the next steps in less than 10 seconds after the LED
blinks twice.
3Press the numeric key to enter "9 9 0".
÷ The LED will blink twice.
Input selector keys
4Press the numeric key "1" once.
The LED blinks for the same number of times as the numeral in the
first digit of the 4-digit code. When the registered setup code is
"1338", for example, the LED will blink once. If a code digit is "0", the
LED will not blink.
1
Use the input selector keys to select the component you desire.
5Repeat step 4 three more times for the remaining digit.
Use "2" for the second digit, "3" for the third digit, and "4"
for the fourth digit.
When the input selector key is pressed, the system component
registeredinthepressedkeybecomesreadytobecontrolled. Theinput
selector of the receiver is also switched accordingly. If you want to
control the component registered in the remote’s input selector key
withoutswitchingthereceiver’sinputselectortothatsource, pressand
hold the input selector key for more than 3 seconds.
Re-assigning device keys
The type of component device that can be registered is assigned in
advance in each input selector key, but this assignment can be changed
as desired by the user.
÷ To put the remote control unit to the receiver control mode, press
the RCV MODE key.
2Turn the component ON.
For example, the initial status is set so that a VCR can be registered in the
input selector VIDEO 1 key. If you want to register the setup code of a
DVD player in the VIDEO 1 key just like in the DVD key, reassign the key
(change the registerable component type assignment for the input
÷ ADVDplayer, CDplayer, MDrecorderorVCRregisteredinoneofthe
remote’s input selector keys can be turned ON by pressing the
remote’s SOURCE.
÷ A TV registered in one of the remote’s input selector keys can be
turned ON by pressing the remote’s TV key.
selector key) as described below.
1Press and hold the REMOTE SETUP key until the LED blinks
3Press the operation keys you desire.
÷ For the keys that can be used with each system component, see
pages 55 to 56.
twice, then release the REMOTE SETUP key.
÷ Proceed to the next steps in less than 10 seconds after the LED
blinks twice.
2Press the numeric key to enter "9 9 2".
÷ The LED will blink twice.
Clearing all of the settings registered or
stored in the remote control unit
3Press the DVD key once, then press the VIDEO 1 key once.
The LED blinks twice, and it is possible to register the setup code
of a DVD player in the VIDEO 1 key just like in the DVD key. Now
register the setup code according to the model of the DVD player.
The combination of components assignable to the input selector
keys can be changed by pressing different keys in step 3. For
example, to change the key assignment so that the same compo-
nent as that registered in input selector "B" key can be registered
in input selector "A" key, press the "B" key then the "A" key after
entering "9 9 2" with the numeric keys.
You can reset the remote control unit to the initial status after purchase,
clearing all of the component registration using setup codes and other
data stored using the learning functions.
1Press and hold the REMOTE SETUP key until the LED blinks
twice, then release the REMOTE SETUP key.
÷ Proceed to the next steps in less than 10 seconds after the LED
blinks twice.
÷
Fortheoriginallyassignedrelationshipbetweentheinputselectorkeys
and system component types, see the table on the previous page.
2Press the numeric key to enter "9 8 1".
÷ The LED blinks four times, and all of the data you registered
÷ To restore the original component type assignment of an input
or stored in the remote control unit is cleared.
selector key, press that input selector key twice after entering "9 9 2".
÷ It is not possible to register a component in the TUNER key.
Examplesofkeyre-assignmentandtheorderofpressingthekeys:
Registration of a DVD player in the VIDEO 1 key
To change the VIDEO 1 key to the DVD key:
"9 9 2" \ "DVD" \ "VIDEO 1"
Restoration of the original key assignment
To return the VIDEO 1 key to the VIDEO 1 key:
"9 9 2" \ "VIDEO 1" \ "VIDEO 1"
Registration of a VCR in the VIDEO 2 key
To change the VIDEO 2 key to the VIDEO 1 key:
"9 9 2" \ "VIDEO 1" \ "VIDEO 2"
Restoration of the original key assignment
To return the VIDEO 2 key to the VIDEO 2 key:
"9 9 2" \ "VIDEO 2" \ "VIDEO 2"
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart (RC-R0920) (For U.S.A. and Canada)
Even when a component is manufactured by a maker listed in the setup code chart, it may be unable to be registered depending on the model and year
of production. Also, when a setup code of a non-KENWOOD maker is registered, certain component models may be unable to be controlled or only the
limited functions may be controllable. In this case, it is recommended to use the remote control unit provided with the system component. For how to
register the setup codes, read "Registering setup codes for other components" carefully.
·
Cable Converters
Video Accessories
TV
Manufacturer Setup Codes
Manufacturer Setup Codes
Manufacturer Setup Codes
ABC
0003, 0008
0899
0899
0883
0883
Macro Image
Technology
Motorola
MyHD
Panasonic
Pioneer
Samsung
Sensory Science 1126
Sharp
Viewsonic
1383
Admiral
Advent
Aiko
Akai
Albatron
America Action
Anam
0093, 0463
0761, 1933
0092
0812, 0702, 0030, 0672
0700, 0843
0180
0180
0030
0748, 0765, 1943
0451, 0180, 0092, 0623
0154
1032
0180
0236, 0463, 1935
0030
0030
0054
0000
0765
0765
0060, 0030, 0092
0180
1447, 0047
Americast
Bell South
Clearmaster
ClearMax
Coolmax
Director
General Instrument 0476, 0276, 0003
GoldStar
Hamlin
1363
1383
1120
1010
1490
0883
0476
AOC
1010
1329
0144
Apex Digital
Audiovox
Bell & Howell
BenQ
Bradford
Broksonic
Candle
Carnivale
Carver
Celebrity
Celera
Changhong
Citizen
Clarion
Commercial
Solutions
Contec
0009, 0273
0476, 0276, 0003
0000
0476, 0276, 1376
0883
1877, 0237
0000, 0107
0000
0317, 1305
1877, 0877, 0144, 0533
0000
0000
0883
0279, 0273
0000
0144
Satellite Receivers
Jerrold
Memorex
Motorola
Multitech
Pace
Panasonic
Paragon
Philips
Pioneer
Pulsar
Quasar
Manufacturer Setup Codes
AlphaStar
Chaparral
Crossdigital
DirecTV
0772
0216
1109
0392, 0566, 0639, 1639,
1142, 0247, 0749, 1749,
0724, 0819, 1856, 1076,
1109, 0099, 1442, 1108,
1414, 1640
Dish Network
System
Dishpro
Echostar
Expressvu
GE
General Instrument 0869
GOI
Hisense
Hitachi
HTS
Hughes Network 1142, 0749, 1749, 1442
Systems
I-Lo
JVC
LG
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
1005, 0775, 1775
RadioShack
Regal
Runco
1005, 0775, 1775
1005, 0775, 1775
0775, 1775
Samsung
0566
0180
0180
0054
0180
Scientific Atlanta 1877, 0877, 0477, 0008
Sony
Craig
Crosley
Crown
1006
0003
0276
0883
0003
0000
0883
0883
0883
0883
0883
0000, 0525, 0899
0775, 1775
1535
0819, 1250
0775, 1775
Starcom
Supercable
Supermax
Torx
Toshiba
Tristar
Curtis Mathes
0047, 0054, 0154, 0451,
0093, 0060, 0702, 0030,
0145, 0166
CXC
Daewoo
0180
1535
0775, 1775
1414
0724, 0722
0724
0749
0451, 1661, 0092, 0661,
0623, 0672
1080
0145
0017
0463, 0180, 0178, 0171,
1034
0000
0154, 0236, 0463, 0180,
0178, 0171, 1963, 0623
0030
0812, 0171
0154
0853, 0683
0180, 0171
0180
V2
Dell
Viewmaster
Vision
Vortex View
Zenith
Denon
Dumont
Durabrand
0869
0869
Electroband
Emerson
CD player
Manufacturer Setup Codes
0247, 0701
0724
1142, 0749, 1749, 0724,
1076, 0722, 0099, 1442
0392, 0566
1535
0869
0392, 0566, 0855, 0143
1276, 1109, 1108
0856
0639, 1639, 1640
0869
1142, 1442
0749, 1749, 0790, 1285
1640
0724, 0722
1535
Envision
ESA
Fisher
Fujitsu
Funai
Futuretech
Gateway
GE
Kenwood
0681, 0826, 0028, 0037,
Philips
0677, 0858, 0190, 0523,
1490, 0340, 0859, 0339,
1338
Proscan
Proton
RadioShack
RCA
Samsung
SKY
Sony
Optimus
Sharp
0037
0037
1755, 1756
1447, 0047, 0051, 0451,
0178
0017, 0030
0030, 0178
0180
MD recorder
Manufacturer Setup Codes
Gibralter
GoldStar
Grunpy
Haier
Hallmark
Harman/Kardon 0054
Harvard
Havermy
Helios
Kenwood
0681, 0826, 1339
Star Choice
Tivo
Audio Amp/Tuners
Toshiba
UltimateTV
Uniden
US Digital
USDTV
Voom
1034
0178
Manufacturer Setup Codes
Kenwood
(Sirius Satellite
Radio)
2000
1535
0869
1856, 0856
0180
0093
0865
Zenith
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
TV (Continued)
TV (Continued)
Manufacturer Setup Codes
TV/DVD Combination
Manufacturer Setup Codes
Manufacturer Setup Codes
Hello Kitty
Hisense
Hitachi
Infinity
Inteq
JBL
JCB
Jensen
JVC
0451
0748
1145, 0145
0054
0017
0054
0000
0761, 1933
0053, 1253, 1923, 0731
0180
0030
0765
Sanyo
Scotch
Scott
0154
0178
Advent
1933
1943
1935
1963
1933
1941
1961
1933
1948
1935
0171, 1963
1935
Apex Digital
Broksonic
Emerson
Jensen
Panasonic
Philips
Prima
RCA
Sansui
Sylvania
Toshiba
0236, 0180, 0178
0047, 0054, 0154, 0156,
0178, 0171
0093
0093
0000, 1925
0180, 0178
0171
0180
0180
Sears
Sharp
Sheng Chia
Sony
Soundesign
Squareview
SSS
KEC
Kenwood
KLH
Starlite
Studio Experience 0843
KTV
LG
LXI
0180, 0030
0178, 0856, 0700, 1934
0047, 0054, 0154, 0156,
0178
1454, 0054, 0030, 0706
0054, 0030, 0704
0250
VCR
Manufacturer Setup Codes
Supreme
SVA
Sylvania
Symphonic
Tandy
0000
0748, 0865
0054, 0030, 0171, 1963
0180, 0171
0093
ABS
1972
Magnavox
Marantz
Matsushita
Maxent
Megapower
Megatron
Memorex
MGA
Midland
Mitsubishi
Monivision
Motorola
MTC
Multitech
NAD
NEC
Nikko
Norcent
NTC
Admiral
Adventura
Aiwa
Alienware
American High
Asha
0048, 0209
0000
0037, 0000
1972
0035
0240
Tatung
1756
1755
0700
Technics
Techwood
Teknika
0250, 0051
0051
0054, 0180, 0150, 0060,
0092
0178, 0145
0154, 0463, 0150, 0178
0150, 0030, 0178
0047, 0017, 0051
0093, 1250, 0150, 0178
0843, 0700
0093
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
0037
0240
0104
0184, 0121, 0209
0037
Telefunken
TMK
TNCi
0702
0178
0017
Toshiba
0154, 1256, 0156, 0060,
1935, 1704, 1945, 1356,
1936
Canon
0035
0060, 0030
0180
Carver
0081
TVS
0463
Citizen
0037
V Inc.
1756, 0885
Craig
0037, 0047, 0240
0060, 0035, 0162
0240
1972
0045
0156, 0178
0030, 1704
0030, 0178, 0092
0748, 0824
0092
0180
0154, 0250, 0166
0887
0093
0236, 0463
0250, 0051, 1947, 1946,
1941
0047, 0156, 0051, 0060,
0030, 0178
0054, 0030
1454, 0054, 0690, 1961
0030
0166, 0679
0092
0761, 1933
0700
0051
1447, 0047
0178
0017
0250, 0051
0047, 0154, 0180, 0030,
0178
Vector Research 0030
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
Victor
0053
Vidikron
Vidtech
0054
0178
Viewsonic
Wards
Waycon
Westinghouse
1755, 0885
0054, 0030, 0178
0156
1972
Onwa
Denon
0042
Optimus
Optoma
Optonica
Orion
DirecTV
0739
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
0039
0000
0037
0037
0889
White
Westinghouse
0463, 0623
Panasonic
Yamaha
Zenith
0030
0017, 0463, 0178, 0092
0032
Penney
Emerson
0037, 0184, 0000, 0121,
0043, 0209
Philco
Philips
Pilot
HDTV
Manufacturer Setup Codes
Fisher
Fuji
Funai
0047, 0104
0035, 0033
0000
Mitsubishi
Panasonic
Pioneer
RCA
0150
0250
0679
1447
Pioneer
Portland
Prima
Princeton
Prism
Proscan
Proton
Pulsar
Quasar
RadioShack
Garrard
Gateway
GE
GoldStar
Gradiente
0000
1972
0060, 0035, 0240
0037
0000
Samsung
Toshiba
0812, 0702
1256
Harley Davidson 0000
Harman/Kardon 0081
Hewlett Packard 1972
TV/VCR Combination
Manufacturer Setup Codes
HI-Q
0047
America Action
Audiovox
Emerson
JVC
LG
Samsung
Sony
0180
0180
0236
1923
1934
1959
1925
1936
Hitachi
Howard
Computers
0000, 0042
1972
RCA
1447, 0047, 1953, 0679,
1948, 0090, 1547
0154, 0180, 0030, 0178
0017, 0030
0030, 1755
0060, 0812, 0702, 0030,
0178, 1959, 1060
Realistic
Runco
Sampo
HP
1972
Hughes Network 0042, 0739
Systems
iBUYPOWER
JVC
KEC
1972
0067
0037
Samsung
Toshiba
Sansui
0463, 1935
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
VCR (Continued)
VCR (Continued)
Manufacturer Setup Codes
DVD player (Continued)
Manufacturer Setup Codes
Manufacturer Setup Codes
Kenwood
Kodak
Lloyd's
LXI
Magnavox
Magnin
Marantz
Marta
Matsushita
Media Center PC 1972
MEI
Memorex
0067
0035, 0037
0000
DVD2000
Emerson
Enterprise
Fisher
Funai
Gateway
GE
0521
0591, 0675
0591
0670
0675
1158
0522, 0717
0744, 1730, 0715, 0833,
1158, 0783, 1099, 0869
0717
Tagar Systems
Teac
Technics
Teknika
Thomas
Tivo
1972
0000
0035, 0162
0035, 0037, 0000
0037
0035, 0039, 0081, 0000
0240
0035, 0081
0037
0000
0739, 0636, 0618, 1503
0240
0045, 0043, 1972, 1503
0037, 0240
1972
TMK
Go Video
Toshiba
Totevision
Touch
Unitech
Vector
0035, 0162
Greenhill
Hitachi
Hiteker
Initial
InterAct
JVC
Kenwood
KLH
Koss
0573, 0664
0672
0717
0035
0240
0045
0035, 0162, 0037, 0048,
0039, 0047, 0240, 0000,
0104, 0209
Video Concepts 0045
0697
Videomagic
Videosonic
Viewsonic
Villain
0037
0240
1972
0000
MGA
0240, 0043
0558, 0623, 0867
0490, 0534, 0682, 0737
0717, 1020
0651
MGN Technology 0240
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
NEC
Nikko
Noblex
Northgate
Olympus
Optimus
1972
1972
0042
0067, 0043
0035, 0048
0240, 0000
0000
0104, 0067
0037
Wards
0060, 0035, 0048, 0047,
0081, 0240, 0000, 0042
0209
Lasonic
LG
0798
0591, 0869
1158, 1058
1108
0503, 0539, 0675
0539
0695
0522
0717
1521, 0521
0717
White
Westinghouse
XR-1000
Zenith
ZT Group
Lite-On
Mad Catz
Magnavox
Marantz
Memorex
Microsoft
Mintek
Mitsubishi
Nesa
Onkyo
Oritron
Panasonic
Pelican
Accessories
0035, 0000
0039, 0033, 0000, 0209
1972
0240
1972
0035
PVR
Manufacturer Setup Codes
ABS
1972
1972
1972
1972
1972
1062, 0162, 0037, 0048,
0104
0184, 0209
1062, 0035, 0162, 0616,
0225
0035, 0037, 0240, 0042
Alienware
CyberPower
Dell
Gateway
Hewlett Packard 1972
Howard Computers 1972
0503
0651
0490, 1762
0731
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Pulsar
Quasar
RadioShack
Radix
0042
0035
Philips
0503, 0539, 0646, 0675,
0885
0525, 0571
1086, 1061
0539
0522
0651
0522, 0571, 0717, 0822
0869
0623
0731
0752
0490, 0573, 0820
0695
0873, 0695, 0670
0630, 0752
0533
1099, 0869
0864, 1033, 0772
0675
0675
0490
0571
0498
HP
1972
1972
0035, 0081, 0618, 0739
0037
0067
0081
0240
0060
0039
0035, 0162
0000
iBUYPOWER
Media Center PC 1972
Pioneer
Polaroid
Polk Audio
Proscan
Qwestar
RCA
Rio
Rotel
Saitek
Sampo
Microsoft
Mind
Northgate
Panasonic
Philips
ReplayTV
Sonic Blue
Sony
Systemax
Tagar Systems
Tivo
1972
1972
1972
0616
0739, 0618
0616
0616
1972, 0636
1972
1972
0618, 0739, 0636
1972
1972
1972
1972
0037
0037
Samsung
Sansui
Sanyo
Randex
RCA
Realistic
0060, 0240, 0042
0035, 0037, 0048, 0047,
0000, 0104
0616
0039
0240, 0045
0048, 0039
0000, 0067, 0209
0047, 0240, 0104
0184, 0045, 0121, 0043
0035, 0037, 0047, 0000,
0042, 0104
Sharp
Toshiba
Touch
Viewsonic
ZT Group
ReplayTV
Runco
Samsung
Sanky
Sansui
Sanyo
Shinsonic
Sonic Blue
Sony
Sylvania
Symphonic
Technics
Theta Digital
Thrustmaster
Toshiba
DVD player
Manufacturer Setup Codes
Scott
Sears
Allegro
Apex Digital
0869
0672, 0717, 1056, 0796,
1020, 0794, 1004, 1061,
0797
0717
0571
0695
0869
1086
0816
0503, 0695, 1154
Sharp
0048
0240
0616
Urban Concepts 0503
Yamaha
Zenith
Shogun
Sonic Blue
Sony
Blaupunkt
Blue Parade
Broksonic
CineVision
Coby
CyberHome
Daewoo
Denon
0490, 0539, 0545
0503, 0591, 0869, 1135
0035, 0032, 0033, 0000,
0636, 1972
0042
0035, 0081, 0000, 0043
0000
1972
Game Player
STS
Manufacturer Setup Codes
Xbox 0522
Sony PlayStation2 0533
Sylvania
Symphonic
Systemax
0784, 0833, 1172, 0869
0490
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart (RC-R0920E) (For Europe and Australia)
Even when a component is manufactured by a maker listed in the setup code chart, it may be unable to be registered depending on the model and year
of production. Also, when a setup code of a non-KENWOOD maker is registered, certain component models may be unable to be controlled or only the
limited functions may be controllable. In this case, it is recommended to use the remote control unit provided with the system component. For how to
register the setup codes, read "Registering setup codes for other components" carefully.
·
Cable Converters
Cable Converters (Continued)
Satellite Receivers (Continued)
Manufacturer Setup Codes
Manufacturer Setup Codes
Manufacturer Setup Codes
ABC
ADB
0003
1269, 1063
0896
1222
0276
Torx
0003
1106
0003
0276
0250
0250
1064
0817, 0451
0000
Aurora
Austar
0879, 0642
0879, 0642, 0863, 1259,
0497
0710
1111, 0880
0455
1017
0243
1284
0173
TransACT
United Cable
US Electronics
Videotron
Videoway
Visionetics
Visiopass
Zenith
Alcatel
Amstrad
Austar
Birmingham Cable 0276
Communications
British Telecom 0003
Cable & Wireless 1068
Cabletime
Comcrypt
Comtec
Axiel
Axis
Beko
Bentley Walker
Bestar
Black Diamond
Blaupunkt
Boca
0448, 0665
0443
0019
0019
0600
0443
1222
CD player
Manufacturer Setup Codes
0132, 0794, 0243
0710
Boston
Contec
Cryptovision
Filmnet
Brand Unknown 0132, 1334, 0299
British Sky
Broadcasting
BskyB
BT
Bush
Canal Digital
Canal Satellite
Canal+
CanalSatellite
Cherokee
Chess
CityCom
Claasen
Nachrichten
Genexxa
Kenwood
0037
0847, 1175
0028, 0190, 0037, 0338,
0677, 0858, 0523, 0826,
0339, 0681, 0859, 0340,
1490, 1338
0037
0037
0677
0847, 1175
1296, 0710
1284
0853
0853
Foxtel
France Telecom 0817, 0896, 0451
Galaxi 0008
General Instruments 0276, 0003
Golden Channel 1063, 1110
HyperVision
i-CAN
Jerrold
Kabelvision
Macab
Melita
Optimus
Sharp
Trio
0853
0853
0619
1063
0276, 0003
0003
0817
MD recorder
Manufacturer Setup Codes
Kenwood 0681, 1339
0710, 0123
1085, 1334
0607, 0299, 1176, 1075
0520
0003
Satellite Receivers
MNET
0019, 0443
0276, 1106
1112
0817
1112
0019, 0443
0817
1068, 1060, 0276, 0003,
0277, 0250
0019
1068
1060, 0276
1068, 1060
0000
0000
0817, 0619
0144
CNT
0520
0132
0132
0132, 1412
0607
Manufacturer Setup Codes
Motorola
Mr Zap
Mr Zapp
Mr. Zap
Multichoice
Noos
Colombia
Columbia
Comag
Condor
Conrad
Conrad Electronic 0607
Crown
Cryptovision
Cyrus
D-box
Daewoo
Daumling
Delfa
Deltasat
Dgtec
@sat
1300
1334
0832, 0123
0642, 1259
0520
0710
0200
0455
0520
0200, 1043, 1017
1412, 1334
0132
0847, 1175, 0132, 0243,
1113, 0795, 0882, 0345,
0863
1083, 1017
0455
1205, 1075, 1043
1205
0243
1300
0200
1334
@Sky
ABsat
ADB
Aegir
AGS
0132, 0607
NTL
0243
0795, 0455
0200
0723, 0873
1111, 1296
0794
0863
1075
1242
1294
1100
0299
0607
0863
1227
0710
0710
1205
Akai
Alba
Oak
Ono
Optus
Pace
Panasonic
Paragon
Philips
Pioneer
Pulsar
PVP Stereo Visual 0003
Matrix
Runco
Sagem
Salora
Samsung
Scientific Atlanta 1068, 0277, 0008
Starcom
Supercable
Tele Danmark
Tele+1
Teledanmark
Telepiu
Aldes
Allsat
Allvision
Ampere
Amstrad
AntSat
Apollo
Arcon
Arion
Armstrong
Arnion
Asat
ASCI
AssCom
AST
Digatron
Digena
0000
Digenius
Digiality
DigiQuest
DigitAll World
Discovery
Diseqc
Distratel
DMT
DNT
Dream Multimedia 1237
DREAM
multimedia.TV
DStv
Echostar
0000
0817, 1112
0000
1060
0853
0321
0710
1261, 0142
0607, 0243
0173, 0658, 1113, 0133,
0607, 1100, 0520, 1099
1300
1334
0003
0276
0619
0443
0619
0443
1068
1110
1075
0200
Astacom
Aston
Astra
1237
Astro
0879, 0642
0853, 0167, 0610, 1200,
1086, 1467, 0871, 1323
Telewest
Thomson
Atsat
AtSky
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Satellite Receivers (Continued)
Manufacturer Setup Codes
Satellite Receivers (Continued)
Manufacturer Setup Codes
Satellite Receivers (Continued)
Manufacturer Setup Codes
Einhell
Elekta
Elta
Emme Esse
Engel
0132, 0794, 0243
0520
0200
0871
1017
0455
0882
0455
0863, 0607
0794
0132, 0607, 0299
0243
0132, 0299, 0243, 0607
0880, 0607
0711, 0455, 1291
0455
0455
1101
1101
1083, 1017
0879, 0720, 0497, 1176,
0455, 1356
0871
0882
0863
0173, 0299
0853, 1111, 1101, 0863
0321
1075
1412
1043
1043
0200
0853
0853, 0292
1017
1284, 0455
0887
0455
Italtel
0871
0723, 0873, 0455
1334
0710
0880
Okano
OnDigital
Opentel
Optex
Optus
Orbitech
Origo
OSAT
Ouralis
Pace
0243
0751, 0241, 0133
1412
1043
0879
1100, 1099
0497
0345
ITT Nokia
Jaeger
JOK
Kamm
Kaon
EP Sat
1300
1111
Eurieult
Eurocrypt
Europa
KaTelco
Kathrein
0173, 0200, 0658, 0123,
0249, 1221
0853
0132, 0794, 0243
0794
0710
0607
1043
0249, 0658
0173
0132, 1334, 1043
1296
0132, 0520, 0299, 0243,
0607
0607
1075
0132, 1043, 0299
1284
0243
1075, 1017
0132, 0607, 1294, 0299,
0867, 0794
0345
0132, 0710
0455, 1083, 1017, 0520
0200
0520
0173
0173, 1284, 0710
0607
1075
1225
1205
Kenwood
Key West
KeyWest
Klap
Konig
Koscom
Kreiling
Kreiselmeyer
L&S Electronic
Labgear
LaSAT
0847, 0853, 0200, 0887,
0720, 1175, 0241, 0497,
0455, 1356, 0795, 0867,
0329, 1323
1111
0710
0299
0243
0879, 0615
0847, 0455, 1304
0173, 0455, 0607
1011
European
Europhon
Eurosat
Eurosky
Eurostar
Ferguson
Finlandia
Finlux
Packard Bell
Packsat
Palcom
Palladium
Panasat
Panasonic
Panda
Pansat
Patriot
Philips
Force
Force NO AS
Fortec Star
Foxtel
0132, 0710
Lenco
LG
Lifesat
Lodos
Loewe
Logix
0853, 0173, 0200, 1114,
0292, 0710, 0455, 0133,
0805
1200, 0863, 1017
1334
0853, 0292, 0352, 0329,
1308
0871
0132, 1113, 1101, 0794
0292
0853, 0873, 0292
0795
1111
0520
0710
0455
0520
0710
0607, 0299
0200
1113, 0882
0200
0853
0607, 0520, 0710
0455
0820, 1114, 1253
0853, 1292, 0863, 1243,
1206, 1293, 1017
0321
1300
0520
0607
0520
Fracarro
Freesat
FTEmaximal
Fuba
Galaxis
Galaxisat
Garnet
Gecco
GF
GF Star
GOD Digital
Gold Box
Goldbox
Goldvision
Goodmans
Gradiente
Granada
Grundig
Phonotrend
Pino
Pioneer
Lorenzen
Planet
Preisner
Premier
Premiere
Prima
Primacom
Pro Visat
Profile
Promax
ProVision
Quadral
Quelle
Radiola
Radix
RFT
Roadstar
Saba
Sabre
Sagem
Samsung
Luxor
Manata
Manhattan
Marantz
Mascom
Maspro
Matsui
Max
Maximum
MDS
Mediacom
Mediamarkt
MediaSat
Medion
1206
0243
0847, 0853, 0173, 0879,
1291, 0805, 1435, 0345,
1330
1099, 1100
0520
1294
1011
0853, 0292
0132, 1075, 1043, 1412,
0299, 1334
Hanseatic
Hanuri
Hauppauge
HDT
Helium
Hirschmann
Mega
Metronic
0200
0243, 1215, 1205, 0520,
1334
0173
1294, 0607
0299
1075
0455
0200, 0132, 0243, 0794
0856
0879, 0642
0321
0200
1334
1322
0887
0607
0132
0200, 0243
0751, 0853, 0723, 0873,
0455, 1723, 1223, 1312,
1023, 1311, 1310
0520, 0455
1294
0607
Metz
Micro
1111, 0173, 0299, 0882,
0710, 0607, 1085
0455
0132
1300
SAT
Micromaxx
Microstar
Mitsubishi
Morgan's
Motorola
Multichoice
Muratto
Myryad
NEOTION
Netgem
Netsat
Hitachi
HNE
Hornet
HSnsel & Gretel 0132
Humax
Huth
Sat Control
Sat Partner
Satcom
SatPartner
Satplus
Satstation
Schneider
Schwaiger
0863, 1225, 1176
0132, 0794, 0607, 1075,
0243, 1017
1075, 1011
1176
0520
0882
0132, 0243
1017
0243
0607
1100
1083
0805, 0710, 1206
1111, 0132, 0607, 1083,
1075, 1334, 0863
Hyundai
ID Digital
Imex
Ingelen
International
Interstar
Intertronic
Intervision
InVideo
IR
SCS
0299
Sedea Electronique 0132, 1206
Seemann
SEG
Seleco
Septimo
Serino
Siemens
Silva
Neuhaus
Neuling
Nikko
0243
1075, 1087
0871
1205
0610
Nokia
0871
0173, 0455, 0282
Nordmende
OctalTV
0173
0299
Irdeto Technology 0879
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Satellite Receivers (Continued)
Manufacturer Setup Codes
Satellite Receivers (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
SKY
0847, 0856, 0887, 1014,
Wintel
Wisi
0299
Audioton
Autovox
Awa
0486, 0264, 0370
0206, 0087, 0247
0606, 0264, 0036, 0108,
0374, 0011, 0009
1175, 0711
0173, 0321, 0299, 0607,
0455
0520
1323, 0710, 0123
0123, 0832
0847, 0123, 1323
1300
Sky Television
SKY+
Skymaster
Skymax
Skyplus
SkySat
Skyvision
SL
SM Electronic
Smart
1014
1175
Woorisat
Worldsat
XCOM
Xsat
Xtreme
Yes
1200, 1085, 1075, 0880
0200
1334, 1412
0607
Axxent
Baird
0009
0208, 0072, 0193, 0190,
0073
Bang & Olufsen 0565, 0087
Basic Line
0556, 0037, 0668, 1037,
0218, 0455, 0009, 0282,
0374
0037, 0361, 0455, 0512,
0009, 0535
0178
0037, 0714, 1037, 0486,
0715, 0606, 0370, 0418
0037, 0418
0668
0337
0037, 0370, 0374
1334
0887
0132, 1294, 0299, 0243
1200
0132, 1113, 0299, 1101,
0882, 0794
0847, 0853, 0292, 0282
0132
0200
0853, 0879, 0132, 0520,
1300
0123
0642, 0132, 0794, 0243
0887
0455
1225
0455
1322, 1227, 1225
1200
0200, 0863, 1195, 0455,
1100, 1099, 1322
0132, 0607
1017
1284
0243
Zehnder
1334, 1075, 0520, 1412,
0321
0856
Baur
Zenith
Zwergnase
0243, 0794
Beaumark
Beko
Sony
SR
Starlite
Strong
TV
Manufacturer Setup Codes
Beon
Berthen
Best
Bestar
Bestar-Daewoo 0374
Black Diamond
Black Star
Blacktron
Blackway
Blaupunkt
A.R. Systems
Accent
Acec
Acura
Admiral
Agashi
AGB
Agef
Aiko
Aim
Aiwa
0455, 0374
0009
0012
Sunkai
Sunstar
Supernova
Tantec
Tarbs
Tatung
Teac
0009
1037
0247
0282
0218, 0282
0195, 0036, 0455, 0535,
0200, 0328, 0170, 0327
0556, 0037, 0714, 0668,
1037, 0715, 0487, 0218,
0455, 0282
0282
0247
0009
0037, 0282
0625, 0560, 0196, 0109,
0335, 0198
0037, 0668, 0486, 0418,
0519
0264, 0087, 0163, 0093
0264
0516
0087
0264, 0009
0037, 0706, 0455
1916, 0701
0556, 0037, 0548, 0714,
0715, 0606, 0361, 0264,
0218, 0433, 0163, 0480,
0371, 0631, 0072, 0473,
0208, 0696, 0178, 0516,
0602, 0009, 0377, 0648
0037, 0218, 0455, 0282,
0294
0418, 0190
0037
0037, 0714, 0668, 0264,
0218, 0282, 0009, 0412
0037, 0714, 0668, 1037,
0487, 0218, 0036, 0009,
0163, 0355, 0443, 0247,
0418, 0371
0294, 0206
0037
0370
Tecatel
TechniSat
Blue Sky
Technowelt
Techsan
Techwood
Teco
tekComm
Telasat
Teleciel
Telefunken
Teleka
Telemaster
Telestar
Teletech
Televes
Televisa
Thomson
Akai
Blue Star
Bondstec
Boots
BPL
Brandt
1017
0607
1043
0710
Akiba
Akira
Akito
Akura
Brinkmann
0607, 0243
0520
1099, 1334, 1100
0880
0132, 1300, 0455
0887
0847, 0853, 0820, 0292,
0711, 0607, 1046, 0455,
0710, 1291
0455
0132, 0243
0200
0455
1206
0455
0820, 1253
0321
0853, 0200, 0132, 1227,
1113, 1296, 1099, 1291
1075
0879
0200, 0132, 0243
0173, 0607, 0299, 1099,
1087
0173
Brionvega
Bruns
BSR
BTC
Bush
0087
0087
Alba
0294, 0163
0218
0556, 0037, 0714, 0668,
1037, 0698, 0487, 0361,
0264, 0218, 0036, 0661,
0355, 0374, 0294, 0009,
0371, 0208, 0519, 0282
Allorgan
Allstar
Amplivision
Amstrad
Canton
Capsonic
Carad
Carena
Carrefour
Carver
Cascade
Casio
Cathay
CCE
Centrex
Centrum
Centurion
Century
CGE
0218
0264
0037, 1037, 0264, 0218,
0433, 0412, 0648, 0371,
0516, 0009
Thorn
Tioko
Tokai
Tonna
Topfield
Toshiba
TPS
0668, 1037, 0610
0037, 0455
0036, 0070
0170
0037, 0009
0037
0037
0037
0780, 0826
1037
0037
0087, 0247
0370, 0084, 0418, 0074,
0247
0218, 0009
0648
0009
Anam
Anglo
0009
0264, 0009
0037, 0282, 0009
0668, 0370, 0104, 0009
0473
0196, 0109, 0198
0037, 0714
0556, 0037, 0012
0163
0104, 0087, 0070
0037
0009
0037
0264, 0218
0698
Anitech
Ansonic
Apollo
Arc En Ciel
Ardem
Aristona
Arthur Martin
ASA
Asberg
Asora
Astra
Asuka
ATD
Triad
Triax
Trio
UEC
Unisat
Universum
Variosat
Ventana
VH-Sat
Visiosat
Viva
VTech
Wewa
Wibo
Cimline
Cinex
City
Clarivox
Clatronic
0200
0299
0142, 0710
0856
0321
Atlantic
Atori
Auchan
Audiosonic
0037, 0259, 0206
0009
0163
0037, 0714, 0486, 0715,
0264, 0370, 0218, 0109,
0337, 0374, 0009
0037, 0070
0037, 0714, 0264, 0370,
0218, 0579, 0009, 0247,
0371
0455
0243
Clayton
1037
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
Concorde
Condor
0009
Eurofeel
Euroman
Europa
Europhon
Expert
Exquisit
Fenner
Ferguson
0264
0037, 0264, 0370
0037
Haaz
Haier
Halifax
Hanimex
Hanseatic
0706
0698
0264
0218, 0294
0556, 0037, 0714, 0634,
0361, 0519, 0661, 0294,
0499, 0009, 0282, 0808,
0377, 0087
0037, 0009, 0516
0037
0037, 0487, 0009, 0412
0037
0093
0037, 0264, 0218, 0282,
0009, 0418, 0412
0009
0109, 0198, 0196
0037, 0264
0218
0037, 0264, 0218, 0036,
0009, 0355, 0294
0714, 0610, 0218, 0455,
0282
0508, 0009, 0780, 0208
0087
0037, 0264, 0370, 0418,
0247, 0282, 0009
0808
0037, 0036, 0009
0487, 0198, 0196, 0109
Conrac
Contec
Continental
Edison
Cosmel
Crosley
Crown
0516
0259, 0206, 0163
0037, 0247
0009, 0374
0037, 0625, 0548, 0560,
0335, 0073, 0193, 0190,
0109
0037, 0361, 0264, 0412,
0193, 0371, 0163, 0512
0548, 0163, 0072, 0346,
0208
0037, 0714, 0715, 0629,
0087, 0473, 0621, 0072,
0346, 0516, 0070, 0631,
0104, 0480
0556, 0037, 0714, 0668,
1037, 0361, 0072, 0294,
0247, 0374, 0009, 0208
0370, 0036, 0072, 0208,
0104, 0087
0037, 0610, 0264, 0218,
0455, 0072
0037, 0009, 0337
0084, 0074, 0247, 0087
Hantarex
Hantor
Harwood
Hauppauge
Havermy
HCM
0037, 0714, 0486, 0715,
0487, 0606, 0712, 0370,
0412, 0009, 0208, 0418,
0579
0218, 0247
0247
0218
0556, 0037
0556, 0037, 0634, 1909,
0218, 0499, 0661, 0009,
0374
Fidelity
Finlandia
Finlux
CS Electronics
CTC
Cybertron
D-Vision
Daewoo
Hema
Hifivox
Highline
Hikona
Hinari
Firstline
Dainichi
Dansai
Dansette
Dantax
Dawa
Dayton
Daytron
De Graaf
Decca
Deitron
Denko
Denver
DER
0218
Fisher
Flint
0037, 0036, 0009, 0208
0412
0714, 0715
0037, 0009
0009
0037, 0374, 0009
0548, 0208
0037, 0621, 0516, 0072
0374
Hisawa
Hisense
Hit
Hitachi
Forgestone
Formenti
Fortress
Fraba
0193
0037, 0087
0093, 0087
0037, 0370
0037, 0610, 0370, 0009,
0499
0264, 0009, 0247, 0163
0009, 0259, 0206, 0072
0206, 0009
0668, 0264, 0294
0264
0037
0037, 0370
0218, 0009, 0374
0625, 0560, 0093, 0282,
0178
0037, 0548, 0634, 1037,
1137, 0036, 0108, 0225,
0730, 0072, 0499, 0163,
0578, 0198, 0719, 0480,
0109, 0196, 0473, 0744,
0516, 1481, 0194, 0629
Friac
Frontech
Fujitsu
Fujitsu General
Funai
Futronic
Galaxi
Galaxis
GBC
GE
0264
0037
Hitachi Fujian
Hitsu
HMV
Home Electronics 0606
Hornyphon
Hoshai
Huanyu
Hyper
Hypson
0108
0610, 0218, 0455, 0009
0087, 0193
0190, 0193
0037, 0087, 0009
0037
0698, 0706, 0264, 0009,
0371
0037
0668
0780
0037
0037, 0087, 0009
0780
0668
Desmet
Diamant
Diamond
0037, 0012
0282
0374
0247, 0009
0037, 0714, 0668, 1037,
0715, 0264, 0455, 0621,
0282
0714
0037
0264, 0218, 0371
0218
0037, 0370, 0196, 0418,
0084, 0074, 0247
Digatron
Digiline
Digital Life
Digitor
Dixi
DL
Domeos
DTS
GEC
0037, 0361, 0163, 0072,
0516
0009, 0374
H_er
Iberia
ICE
ICeS
Imperial
Geloso
General Technic 0009
Genesis
Genexxa
0037, 0009
0037, 0218, 0163, 0412,
0009
0009
Dual
0037, 1137, 0631, 0519,
0259
0087, 0070
0037, 0012
0037, 0012
0218
Goldfunk
GoldStar
0668
Dumont
Dux
Dynatron
E-Elite
Ecco
Edison-Minerva 0487
Elbe
Elbe-Sharp
Elekta
ELG
Indiana
Ingelen
Ingersoll
Inno Hit
0037
0037, 0714, 0715, 0606,
0361, 0178, 0377, 0163,
0109, 0247
0714, 0610, 0487, 0163
0009
0009, 0282, 0247, 0072,
0516
0519
0037, 0264, 0247
0037, 0361, 0512, 0200,
0012, 0163, 0327, 0087,
0247
Gooding
Goodmans
0487
0706
0556, 0037, 0714, 0560,
0668, 0634, 1909, 1037,
0487, 0264, 0218, 0036,
0480, 0516, 0579, 0374,
0499, 0371, 0661, 0009,
0072, 0335
0370
0218
Innovation
Interbuy
Interfunk
0610, 0516, 0259
0516
0264, 0282, 0009
0037
0037, 0548, 0361, 0009,
0104
0218
0264, 0009
0247
0037, 0714, 1909, 0486,
0361, 0370, 0087, 0282,
0371, 0070, 0247, 0178
Gorenje
GPM
Gradiente
Graetz
Gran Prix
Granada
Internal
Intervision
0037
Elin
0170
0037, 0486, 0487, 0264,
0218, 0455, 0009, 0519,
0247, 0377, 0282
Elite
Elta
Emco
Emerson
0487, 0361, 0163, 0371
0648
0037, 0548, 0560, 0108,
0226, 0473, 0072, 0208,
0516, 0163
0037, 0714, 0668, 1037,
0715, 0610, 0455, 0579,
0163, 0374, 0009, 0282
0556, 0037, 0195, 0487,
0706, 0036, 0587, 0535,
0009, 0070, 0443
IR
0556, 0037, 0195, 0361,
0370, 0036, 0108, 0225,
0226, 0193, 0327, 0087,
0196, 0374, 0011, 0535,
0190, 0294, 0073, 0104,
0206, 0516, 0163, 0247,
0072, 0194, 0093, 0200,
0512, 0012, 0109, 0070
Grandin
Grundig
Emperor
Erres
ESC
0282
0037, 0012
0037
Irradio
0037, 0218, 0371, 0009,
0247
Etron
0009, 0163
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
Isukai
ITS
0037, 0218, 0455, 0282
0037, 0264, 0218, 0282,
0371
0548, 0610, 0361, 0473,
0193, 0163, 0346, 0480,
0208
0548, 0610, 0606, 0361,
0346, 0480, 0208, 0473,
0163
0037, 0264, 0374, 0247
0036
0556, 0634, 0499, 0443
0712
0556
0606, 0218, 0036, 0653,
0193, 0418, 0190, 0371,
0093
0037, 0218, 0455, 0009,
0282
0361, 0206, 0163, 0104
0714, 0610, 0264, 0282
0556
0371
0163
0037, 0610, 0247, 0519,
0294
0206, 0163
0455
0706
0037, 0668
0556, 0037, 0610, 0499,
0374, 0259
0247
0009
0037, 0714, 0218, 0587,
0371, 0418
0487
0037
0087
0412
0009
0012
0412, 0418
0163
0714, 0808
0486
0009
Luxman
Luxor
0579
NEC
0036, 0455, 0011, 0374,
0661, 0009, 0170, 0499
0548, 1037, 0361, 0480,
0194, 0473, 0631, 0163,
0208
0037, 0109, 0374, 0104,
0346, 0163, 0480, 0009
0037
0087, 0516, 0247
0516
0036, 0011, 0780
0037, 0714, 0715, 0648
0264
0037, 0264, 0294
0037, 0668, 1037
0556, 0037, 0412
0087
0037, 0714, 0715, 0374,
0009
0499
0037, 0264, 0218, 0371,
0009
0556, 0037, 0714, 0195,
1037, 0487, 0036, 0455,
0433, 0294, 0579, 0011,
0371, 0072, 0208, 0009,
0355, 0443, 0516, 0335,
0629, 0163
0009
0037, 0012
0556, 0037, 0714, 0668,
1037, 0698, 1137, 0808,
0512
0610
1037
0037, 0714, 0634, 0104,
0346, 0512, 0247, 0480,
0009, 0661, 0163, 0374
1037, 0009, 0178
0337
0037, 0009
0625
0037, 0668, 0587, 0746,
0447, 0367, 0087, 0535
0218, 0374, 0178
0037, 0668, 1037, 0808
0808
Neckermann
0556, 0037, 0370, 0087,
0327, 0247, 0418, 0200
0037, 0371, 0337
0247
0037
0337
0556, 0037, 0714, 0610,
0218, 0009
0556, 0037, 0009
0218
0037, 0264, 0218, 0036,
0009, 0072, 0337
0178
0070
0196, 0109
0548, 0610, 0606, 0361,
0480, 0346, 0473, 0208,
0374, 0163, 0631
0037, 0714, 0560, 0195,
0109, 0198, 0196
ITT
NEI
M Electronic
Nesco
Netsat
Network
Neufunk
ITT Nokia
Madison
Magnadyne
Magnafon
Magnavox
Magnum
Mandor
Manesth
Manhattan
Marantz
Marelli
ITV
Jean
JMB
Jocel
Jubilee
JVC
New Tech
New World
Nikkai
Nikko
Nobliko
Nogamatic
Nokia
Kaisui
Mark
Kapsch
Master's
Masuda
Karcher
Kathrein
Kawa
KB Aristocrat
Kendo
Nordmende
Normerel
Novak
Novatronic
NU-TEC
Oceanic
0037
0012
Matsui
0037, 0374
0698, 0455
0548, 0361, 0208, 0163,
0473
0264
0037, 0370, 0009
0264
0698, 0826, 0780
0714
0218, 0433, 0371, 0602
0037
0037
0556, 0037, 0714, 0264,
0443, 0655, 0412, 1916,
0355, 0516, 0011, 0294
0037, 0218
0668, 1037
0516
Kennedy
Kiota
Kioto
Kiton
Kneissel
MCE
Mediator
Medion
Odeon
Okano
Omega
Omni
Onimax
Onwa
Opera
Orbit
Kolster
Konichi
Konka
Megas
MEI
Melectronic
Kontakt
Korpel
Orion
Memorex
Memphis
Mercury
Metronic
Metz
Korting
Kotron
Koyoda
Kriesler
Kyoshu
Kyoto
L&S Electronic
LaSAT
Leader
Lecson
Legend
Lenco
Orline
Ormond
Orsowe
Osaki
0556, 0037, 0264, 0218,
0412, 0374, 0072, 0355
0037
MGA
Osio
Oso
Osume
Otto Versand
Micromaxx
Microstar
Minato
0218
0037, 0218, 0036, 0072
0037
0556, 0037, 0361, 0036,
0226, 0093, 0247, 0512,
0109, 0294, 0535
0556, 0714, 1037, 1137
0037, 0714, 0370, 1137,
0519, 0418, 0655, 0247
0037, 0698, 0264, 0218,
0418, 0377
0037, 0264, 0247
0037, 0548, 0361, 0650,
0108, 0226, 0516, 0163,
0367
Minerva
0487, 0108, 0070, 0516,
0535
0037, 0412
0037
0009
0037, 0374
0009
0247
0037, 0264, 0072, 0579,
0294
0556, 0037, 0714, 0715,
0698, 0178, 0109
Minoka
Mistral Electronics 0193
Mitsubishi
Pacific
Palladium
Lenoir
Lesa
Leyco
0556, 0037, 1037, 0036,
0108, 0087, 0178, 0535,
0093, 0512
0609, 0516
0009
0037
0370, 0512
0714
0193
0037, 0668, 1037, 0486
0037, 0486, 0264, 0009,
0247
0163
0218, 0247
0556
0361, 0178
0037, 0606
0226
Palsonic
Mivar
Panama
Panasonic
LG
Monaco
Morgan's
MTC
MTlogic
Multibroadcast
Multitec
Multitech
Liesenk & Tter
Liesenkotter
Lifetec
0037
0037, 0012, 0328, 0327
Panavision
Pathe Cinema
Pathe Marconi
Pausa
Penney
Perdio
0037
0163
0198, 0196
0009
0037, 0714, 0668, 1037,
1137, 0218, 0519, 0009,
0374
Lloyd's
Loewe
0009
0178
0037, 0087, 0633, 0516,
0512, 0655
0698, 0193, 0011, 0009,
0371
0668
0259, 0206
0037, 0264, 0259, 0206,
0163, 0073
0037, 0009
0037, 0163, 0072, 0282
0037
0037, 0370, 0247, 0087,
0418, 0084, 0074
Murphy
Musikland
Myryad
NAD
Naiko
NAT
Logik
Perfekt
Philco
Logix
Luma
Lumatron
Philex
Philips
0193
0556, 0037, 0361, 0200,
0012, 0193, 0374, 0009,
0087
Lux May
National
0226
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
Phoenix
Phonola
Pioneer
0037, 0486, 0087
0037, 0012, 0193, 0087
0037, 0486, 0361, 0512,
0011, 0163, 0109, 0170
0486, 0370
0037, 0264, 0009
0037, 0714, 0715
0697, 0282
0009
Sakyno
Salora
0455
Soundesign
Soundwave
Spectra
Ssangyong
Staksonic
Standard
0178
0037, 0715, 0418
0009
0009
0009
0037, 1037, 0218, 0009,
0374
0037, 0264, 0009
0218, 0282
0206, 0163, 0259
0037, 0264, 0009
0610, 0487, 0455, 0355,
0294
0037, 0264, 0579, 0009,
0371
0037
0516
0455, 0009, 0208
0556, 0037, 0218, 0009
0009, 0178
0218, 0335
0009
0548, 0361, 0516, 0631,
0194, 0480, 0621, 0163,
0208
0335
0516
0556, 0037, 0264, 0370,
0587, 0618, 0163, 0718,
0009, 0093, 0644, 0208,
0519, 0072, 0178
0037, 0706, 0455, 0371,
0655, 0602
Salsa
Sambers
Samsung
Pionier
Plantron
Playsonic
Polytron
Poppy
Portland
Powerpoint
Prandoni-Prince 0361, 0516
Premier
Prima
Prinston
Prinz
Profex
Profi
Profitronic
Proline
Starlite
Stenway
Stern
Strato
Sunkai
Sansui
0374
0037, 0487
Santon
Sanyo
0009
0370, 0036, 0108, 0072,
0208, 0011, 0104
0556, 0037, 0193, 0012
0548, 0714, 0486, 0606,
0361, 0374
0556, 0037, 0714, 0668,
1037, 0361, 1137, 0218,
0519, 0070, 0247, 0371,
0648, 0012, 0163, 0259
0178
0163
0178
0634
1037
0037, 0668, 0634, 1037,
0264, 0218, 0036, 0009
0037, 0206, 0163, 0516,
0087, 0294
0037, 0087, 0516, 0294,
0206
0264, 0259, 0371, 0206,
0346, 0163
0009
0610, 0455, 0093
0036, 1193, 0193, 0516,
0093, 0294, 0200
0037
0037, 0178, 0443
0294
0072, 0009, 0418
0516, 0087
0037, 0195, 0200, 0535,
0328, 0327
0012
0370
0037, 0361, 0648
0037
0715, 0361, 0036, 0455
0037, 0433, 0009, 0335,
0087
0037, 0361, 0163, 0087,
0294, 0206, 0516
0037
0696
0668
0487
0037, 0548, 0361, 0072,
0163
0218
0264, 0009
0264, 0009, 0412
1037
0361, 0072, 0194
0361, 0163, 0009
0009
Sunstar
SBR
Schaub Lorenz
Sunwood
Superla
Supersonic
SuperTech
Supra
Susumu
Sutron
SVA
Swissline
Sysline
T + A
T+A
Tandberg
Tandy
Schneider
0037
0037, 0625, 0634, 0072,
0012, 0621
0037, 0714, 0668, 0370,
0374, 0371, 0579
0037, 0668, 1037, 0486,
0264, 0247, 0418, 0337,
0009
0178
0556, 0037, 0714
0556, 0037, 0412, 0012,
0374, 0087
0009
0218
0009, 0247
0037, 0668, 0361, 0104,
0328, 0535, 0084, 0327,
0011, 0512, 0074, 0200,
0070
Scotch
Scotland
Sears
Seaway
Seelver
SEG
Prosonic
Protech
0587
0247
0037
0447
0447
0367
Proton
ProVision
Pye
SEI
0218, 0163, 0093, 0072
0036, 0163
0037, 0011, 0516, 0072,
0629, 0621
Sei-Sinudyne
Seleco
Tashiko
Tatung
Pymi
Quadral
Quasar
Quelle
TCM
Teac
0714, 0808
Sencora
Serino
Sharp
0037, 0714, 0668, 1909,
1037, 0698, 0706, 0712,
0264, 0455, 0170, 0282,
0418, 0009, 0178, 0412,
0512
0037, 0247, 0337, 0009,
0259
0037, 0668
0218
0556, 0650
0556, 0655
0556
Questa
R-Line
0036
0037
Shintoshi
Shivaki
Shorai
Show
Siarem
Siemens
Tec
Radialva
Radiola
Radiomarelli
RadioShack
Radiotone
0218, 0337
0556, 0037, 0012
0037, 0516, 0087
0037, 0178
0037, 0668, 1037, 0264,
0009, 0412, 0648, 0579
0070
0036, 0602
0070
0625, 0560, 0093
0037, 0418
Tech Line
Techica
Technics
TechniSat
Tecnimagen
Tedelex
Tek
Teleavia
Telecor
Telefunken
Siera
Siesta
Silva
Silva Schneider
Silver
Rank
Rank Arena
RBM
RCA
Recor
Rectiligne
Rediffusion
Reflex
Reoc
Revox
Rex
0606, 0418, 0208, 0009
0009
0196
0037, 0218, 0259, 0163
Singer
0037, 0625, 0560, 0486,
0698, 0712, 0587, 0074,
0196, 0073, 0109, 0346,
0084, 0335
0037
Sinudyne
0548, 0361, 0036, 0346
0037, 0668, 1037
0714
Telefusion
Telegazi
0037
SKY
Skysonic
SLX
Smaragd
Solavox
0037, 0264, 0218, 0163,
0259
0037
0556, 0037, 0009, 0579
0037, 0668, 1037, 0009,
0337, 0247
0036, 0206, 0259
0163
0037
0294
0264, 0455, 0009
0037
0037
0264, 0163, 0259, 0206
0037, 0264, 0087, 0072
0037, 0668, 1037, 0264,
0218, 0418, 0282, 0009
Telesonic
Telestar
Teletech
RFT
Roadstar
Sonawa
Soniko
Sonitron
Sonneclair
Sonoko
Sonolor
Robotron
Rowa
0087
Teleton
0037
0370, 0208
0037
0037, 0264, 0009, 0282
0548, 0361, 0163, 0282,
0208
0037, 0370, 0294, 0009
0037, 1505, 0036, 1010,
0170, 1651, 0011, 0093
0698, 0712, 0264, 0587,
0009
0370, 0335, 0412
0625, 0548, 0714, 0560,
0361, 0163, 0335, 0109,
0198, 0516, 0087, 0196
Televideon
Teleview
Temco
Tempest
Tennessee
Tensai
Royal Lux
Saba
Sagem
Saisho
Saivod
Sakan
0610, 0455
Sontec
Sony
0037, 0715, 0218, 0104,
0294, 0377, 0247, 0374,
0009, 0371
0264, 0011, 0009, 0516
0037, 0668, 1037, 0712
0163
Sound & Vision
0218, 0374
Tenson
0009
EN
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
TV (Continued)
Manufacturer Setup Codes
TV (Continued)
Manufacturer Setup Codes
VCR (Continued)
Manufacturer Setup Codes
Tevion
0037, 0714, 0668, 1037,
Worldview
Xenius
XLogic
XMS
Xrypton
Yamaha
Yamishi
Yokan
0455
0634, 0661
0698
0698
0037
0650
0037, 0218, 0455, 0282
0037
0037, 0264, 0218, 0009,
0247
0218
0264, 0206
Blue Sky
0278, 0037, 0348, 0642,
1137, 0648
0072, 0352, 0480, 1137
0072, 0020
Texet
Thomson
0218, 0009, 0374
0037, 0625, 0560, 0196,
0109, 0335, 0198
0037, 0361, 0036, 0499,
0084, 0190, 0074, 0535,
0109, 0335, 0073, 0512,
0104, 0193, 0072
Bondstec
Brand Unknown 0348, 0104
Brandt
Brandt Electronic 0041
Brandt Electronique 0041
Brinkmann
British Sky
Broadcasting
0320, 0041, 0493, 0321
Thorn
0348
1942
Thorn-Ferguson 0073, 0499, 0193, 0190
TMK
Tobishi
Tokai
Yoko
0178
0218
Yorx
Zanussi
Bush
0081, 0278, 0348, 0000,
0642, 0072, 0352, 0315
0081
0045
0081
0000
0278
0020
0000, 0041
0072
0278, 0037
0000, 0072, 0020
0072
0352
0278, 0020
0037, 0072, 0240
0278, 0037, 0072, 0480,
0020
0081
0278, 0637, 0642, 0352,
0045, 0020
0278, 0072
0352
0278, 0020
0081, 0104, 0048, 0042,
0166
0081, 0000, 0352, 0067,
0041
0278
0072
0042
0037
0348
0037, 0668, 1037, 0337,
0009, 0163, 0072, 0374
1037
0218, 0282
0780
0714, 0195, 0036, 0618,
0650, 0508, 0718, 0070,
0009, 1508, 0109
Carena
Carrefour
Carver
Casio
Cathay
Catron
CGE
Cimline
Citizen
Clatronic
Colt
Combitech
Condor
Craig
Tokaido
Tomashi
Tongtel
Toshiba
TV/VCR Combination
Manufacturer Setup Codes
Aiwa
1916
1909
1909
1909
1909
Daewoo
Emerson
Goodmans
Teac
Toyoda
Trakton
0264, 0009, 0371
0264, 0009
Trans Continens 0037, 0668, 1037
TRANS-continents 0621
Transonic
TV/DVD Combination
Manufacturer Setup Codes
0037, 0698, 0712, 0264,
0455, 0587, 0512, 0009,
0418
0556
0516
0264, 0218, 0193
0556, 0516, 0346
0282
Bush
1037, 0698
Triad
Trident
Tristar
Triumph
Tsoschi
TVTEXT 95
Uher
VCR
Manufacturer Setup Codes
Crown
Cyrus
Daewoo
Accent
Adyson
Aim
0072
0072
0278, 0020
0037, 0348, 0000, 0307,
0352, 0734, 0687, 1137,
0742
0037, 0348, 0642, 0352,
0315, 0106, 0240, 0020,
0041
0556
Dansai
0037, 0486, 0480, 0418,
0374, 0206
0037, 0087, 0247
0037, 0455
0037, 0714, 0715
0037
0037, 0668, 1037, 0361,
0264, 0370, 0036, 0618,
0200, 0473, 0294, 0535,
0074, 0346, 0170, 0418,
0011, 0512, 0070, 0328,
0631, 0104, 0009, 0247,
0480, 0327, 0084
0037, 0163, 0087, 0337
0556, 0037, 0668, 1037
0037, 0009
0218
0218
0009
0247
0037
Aiwa
Dantax
Daytron
De Graaf
Ultravox
Unic Line
United
Universal
Universum
Akai
Decca
Akiba
Akura
Alba
0072
0072
Deitron
Denko
Denon
Diamant
Diamond
Dream Multimedia 1968
DREAM
multimedia.TV
Dual
0081, 0278, 0348, 0000,
0072, 0352, 0315, 0020
0240
0081
0020
Allorgan
Allstar
Univox
Vestel
Vexa
Videologic
Videologique
Videomac
Videosat
VideoSystem
Vidtech
Vision
Ambassador
America Action
Amstrad
Anam
Anam National
Anitech
Ansonic
Aristona
ASA
1968
0278
0278, 0000, 0072, 1942
0037, 0226, 0240
0226
0072
0000
0081, 0278, 0348, 0000,
0041
0081, 0000, 0104
0278, 0038
0072
0240
0072
Dumont
Elbe
Elcatech
Elin
Elsay
Elta
0081
0178
0037, 0264
0206
0037
0178, 0163, 0087, 0418
0037, 0668, 1037, 0163,
0109, 0418
0081, 0037
0037, 0038
0278
Asuka
Audiosonic
Audioton
0278, 0072
0278, 0637, 0037, 0000,
0072, 0045, 0043, 0593
Vistar
Vortec
Voxson
Waltham
Emerson
0020
ESC
0278, 0240, 0020
AVA Technology 0615
Etzuko
Europhon
Fenner
Ferguson
0072
0020
0020
AVP
Awa
Baird
0000, 0352
0278, 0037, 0642, 0043
0000, 0104, 0106, 0041
Wards
Watson
0178
0037, 0668, 1037, 0218,
0579, 0519, 0009, 0163
0037, 0036, 0087
0556, 0037, 0519
0037, 0337
0278, 0000, 0320, 0493,
0041, 0321
0000, 0072, 0352, 0432,
0240
0081, 0037, 0000, 0384,
0104, 0048, 0043, 0042,
0106, 0226, 0166
0081, 0000, 0104, 0042
0278, 0037, 0348, 0072,
0045, 0043, 0480, 1137
Bang & Olufsen 0499
Basic Line
Beko
Bell & Howell
Bestar
Black Diamond
Black Panther
Blaupunkt
Wega
Wharfedale
White
Westinghouse
Windsor
Windstar
Windy Sam
Wintel
0278, 0072, 0104, 0020
0104
0104
0278, 0020
0642
Fidelity
Finlandia
0668, 1037
0282, 0337
0556
Finlux
Firstline
0278
0081, 0226, 0195
0714
EN
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
VCR (Continued)
Manufacturer Setup Codes
VCR (Continued)
Manufacturer Setup Codes
VCR (Continued)
Manufacturer Setup Codes
Fisher
Flint
Frontech
Fujitsu
Fujitsu General
Funai
0104, 0020
0348
0072, 0020
0000
0037
0000
0000
0278
0000
0020
Jensen
JMB
Joyce
JVC
Kaisui
Kambrook
Karcher
KEC
0041
0348, 0352, 0742
0000
National
NEC
0226
0278, 0037, 0104, 0067,
0041, 0038
Neckermann
Nesco
0081
0081, 0384, 0067, 0041
0072
0037
0000, 0072
0278, 0072, 0020
0037
Nikkai
Galaxi
Nikko
0081, 0278
0278, 0037
0278, 0348, 0642, 0072,
0315, 0106
0067, 0041, 0038
0000
Galaxis
Garrard
GBC
GE
GEC
Nokia
0081, 0278, 0104, 0048,
0042, 0315, 0106, 0240,
0041
Kendo
0320, 0048, 0240
0081
0020
Nordmende
Oceanic
0320, 0384, 0067, 0041,
0321, 0493
Kenwood
KIC
General
General Technic 0348
0081, 0000, 0104, 0048,
0106, 0041
Kneissel
Korpel
Kuwa
0278, 0037, 0348, 0352
0072
0226
Okano
0278, 0348, 0072, 0315
0642
Genexxa
Go Video
GoldHand
GoldStar
Goodmans
0104
0432, 0620
0072
Onimax
Optimus
Kyoto
0072
0278
0072
0037, 0104, 0048, 0432,
0593
Lenco
Leyco
LG
Lifetec
Lloyd's
Loewe
Logik
Lumatron
Lux May
Luxor
0037, 0480
Orbit
0072
0081, 0278, 0637, 0037,
0348, 0000, 0642, 0072,
0352, 0020
0037
0000
0104, 0240, 0041
0081, 0037, 0000, 0104,
0048, 0042, 0226, 0240
0278, 0037, 0000, 0072,
0020
0081, 0348, 0072, 0320,
0352, 0226, 0195, 0347,
0742
Orion
0348, 0352, 0742, 0687
0000
0037, 0480, 1137
0348
0000
Orson
GPX
Gradiente
Graetz
Osaki
0037, 0000, 0072
0072
Osume
Otto Versand
Pace
0081, 1562, 0037
0072, 0106, 0240
0593
0081
Granada
0352, 1942
0348, 0000, 0642
0037, 0348, 0072, 0041
0000, 0642, 0072
1562, 0226, 0836, 1662
0043
Grandin
Grundig
0072
Pacific
0104, 0048, 0043, 0315,
0106
0037
Palladium
Palsonic
Panasonic
Pathe Cinema
Pathe Marconi
Penney
Pentax
LXI
Haaz
0348
0352
0081, 0037, 0038
0020
M Electronic
Magnasonic
Magnavox
Magnin
Magnum
Manesth
Marantz
Mark
0000, 0038
0278, 0593
0081, 0000, 0642
0240
Hanimex
Hanseatic
Hantor
Harley Davidson 0000
Harman/Kardon 0038
Harwood
HCM
Hinari
0041
0037, 0042, 0240, 0038
0042
0642
Perdio
0000
0081, 0072, 0045
0081, 0038
0278, 0000, 0020
0278
0278, 0348, 0352, 0742,
0687, 0240
Philco
0072, 0038
0081, 0384, 0593
0278
0072
0072
Philips
Phoenix
Phonola
Pilot
0278, 0072, 0352, 0041,
0240
0352
0045
0081, 0000, 0042, 0240,
0041, 0166, 0593
0081
0042
Master's
Matsui
0081
Hisawa
Hischito
Hitachi
0037
Pioneer
Portland
Prinz
0081, 0067, 0042
0278, 0637, 0020
0000
Mediator
Medion
Melectronic
Memorex
0081
0348, 0642, 0352
0037, 0000, 0038
0037, 0348, 0000, 0104,
0048, 0240
0072
0020
0081
0081, 1562, 0037, 0226,
0195, 0836, 0347
0043, 0240
0348
0000
0195
Hornyphon
Hughes
Network Syst
Profitronic
Proline
0081, 0240
0278, 0000, 0642, 0320,
0615, 0321
Hypson
0278, 0037, 0000, 0072,
0352, 0480
0278, 0642
0020
0000
0240
0072, 0020
0037, 0072
0081, 0104
0278, 0637
0278, 0037, 0642
0278, 0000
0081, 0348, 0072, 0104,
0045, 0042, 0106, 0226,
0240, 0041, 0020
Memphis
Mercury
Metronic
Metz
Prosco
Prosonic
Protech
ProVision
Pye
0278
H_er
0278
Impego
Imperial
Ingersoll
Inno Hit
Interbuy
Interfunk
Internal
International
Intervision
IR
0081
0278
0081, 0000
0278
MGA
Quasar
Quelle
Micormay
Migros
Minerva
Minolta
Mitsubishi
0081
Radialva
Radiola
Radionette
RadioShack
Rank
0081, 0037, 0072, 0048
0081
0037, 1137
0037, 0000
0041
0042
0081, 0000, 0642, 0067,
0048, 0043, 0480
MTC
0000, 0240
0037
Multitec
Multitech
Murphy
Myryad
NAD
Rank Arena
RCA
0041
Irradio
ITT
0081, 0037, 0072
0384, 0104, 0106, 0041,
0240
0000, 0072, 0020
0000
0320, 0048, 0042, 0240
0037, 0000, 0104, 0048
0348
0384, 0041
0072, 0020
Realistic
Reoc
Rex
0081
ITV
0278, 0037, 0020
0104
ITV Videomaster 0020
JBL 0278
Naiko
0642
RFT
EN
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
VCR (Continued)
Manufacturer Setup Codes
VCR (Continued)
Manufacturer Setup Codes
PVR
Manufacturer Setup Codes
Dream Multimedia 1968
Roadstar
0081, 0278, 0037, 0072,
Teac
0278, 0637, 0037, 0000,
0240, 0742
0072
0307, 0642, 0072, 0593,
0041
Pace
SKY
Thomson
Tivo
1942
1942
0722
0722
Royal
Saba
Tec
0072, 0020
0072
0081, 0226
0348
0037, 0348
0037, 0000
0493, 0041
0278, 0642, 0320, 0384,
0041, 0321, 0493
0278, 0320, 0384, 0321,
0041
0348
0104, 0043, 0106
0045, 0432, 0620, 0240
0020
Tech Line
Technics
TechniSat
Tedelex
Teknika
Teleavia
Telefunken
Saisho
Salora
Samsung
Samurai
Sansei
Sansui
DVD player
Manufacturer Setup Codes
3DLAB
A-Trend
0539
0714
0048
0348, 0000, 0072, 0067,
0106, 0041
0348, 0104, 0067, 0048,
0240
0278, 0352, 0240
0081
0348, 0000, 0104, 0315,
0106, 0041
Acoustic Solutions 0730
AEG
Afreey
Aim
0770, 0790, 0788
0698
0699
Sanyo
Telestar
Teletech
Tempest
Tenosal
Tensai
Tevion
Texet
Thomas
Thomson
0037
0278, 0000, 0072
0020
Saville
SBR
Schaub Lorenz
Aiwa
Akai
0533, 0641, 1912
0790, 1115, 0716, 0705,
0788, 0690, 0766
0072
0278, 0000, 0072
0348, 0642
0278, 0020
0000
0278, 0320, 0384, 0067,
0041, 0493, 0321, 0722
0037, 0104, 0041
0722
0037, 0072, 0104, 0041
0348
Schneider
0081, 0278, 0037, 0348,
0000, 0642, 0072, 0352,
0042, 0240
Akira
Akura
Alba
0699
1170, 0898
0539, 0695, 0730, 0717,
0672, 0713, 0783, 0699
Scott
Sears
Seaway
SEG
0043
0037, 0000, 0104, 0042
0278
0081, 0278, 0637, 0642,
0072, 0240
0081
0081
0037, 0384, 0020, 0041
0045
0072, 0020
0072
0037, 0048, 0569
0072, 0104
0037
0081, 0037, 0320, 0104,
0195, 0347
0081
0037
0278
0348, 0045
0081, 0352
1942
0348
0020
Alize
1151
Thorn
Tivo
Tokai
Topline
Toshiba
Amitech
Amstrad
AMW
0770, 0850
0713
0872
SEI
Ansonic
Apex Digital
Audiosonic
Audiovox
Awa
0831
1004, 0672
0690
0717
0730, 0872
0730
Sei-Sinudyne
Seleco
Semp
Sentra
Setron
Sharp
Shintom
Shivaki
Siemens
0081, 0384, 0352, 0045,
0043, 0432, 0742, 0041
Totevision
Towada
Tradex
Trakton
Triad
TVA
Uher
Ultravox
Unitech
United
0037
0072
0081
0020
0278
0020
0240
0278
0240
0348
Axion
Baze
0672
Beko
1153
Bellagio
Black Diamond
Blue Sky
Boghe
1004
0766, 0713
0695, 0651, 0713, 0672
1004
Siera
Silva
Silver
Singer
Sinudyne
SKY
Smaragd
Solavox
Sonneclair
Sontec
Sony
Soundwave
Ssangyong
Standard
Stern
Boman
0783
United Quick Star 0278
Universum
Brainwave
0770, 1115
0081, 0037, 0348, 0000,
0104, 0106, 0240, 0195,
1137
Brand Unknown 0490, 0730, 0717
Brandt
Broksonic
Bush
0503, 0551, 0651
0695
0695, 0730, 0831, 0690,
0713, 0672, 0699, 0516,
0717
Victor
0067
Video Concepts 0045
0072
0037
Video Pro
Video Technic
Videomagic
VideoPro
Videosonic
Villain
0020
0000
0037
0020
0240
0000
C-Tech
0768
0000, 0032, 0106, 1032
0037, 0348
0072
0278
0278
0278, 0348
0000
0000
Cambridge Audio 0751
Cat
0699
CCE
0730
Centrex
Centrum
CGV
Cinetec
cineULTRA
Classic
Clatronic
Clayton
Coby
1004, 0672
0713
1115, 0751
0872, 0713
0699
0730
0672, 0788
0713
Wards
0081, 0000, 0072, 0045,
0048, 0042, 0240, 0038
0081, 0642, 0352
0037
Sunkai
Sunstar
Suntronic
Sunwood
Supra
Sylvania
Symphonic
Tandberg
Tandy
Watson
Weltblick
Wewa
0072
0493
0278, 0037, 0348
0081, 0043
0000, 0593
0278
0000, 0104
0081, 0037, 0000, 0048,
0240
0081, 0348, 0000, 0352,
0048, 0043, 0041
0348
0348
Wharfedale
White
Westinghouse
World
Yamaha
Yamishi
Yokan
Yoko
0642, 0615, 0593
0278, 0072
0730
0348
Compacks
Conia
Contel
0826
0852, 0672, 0516
0788
0038
0278, 0072
0072
Tashiko
Continental Edison 0831, 0872
Tatung
0037, 0072, 0020, 0240
0637, 0000
0348, 0352
Crown
0770, 1115, 0690
Zenith
ZX
Cybercom
CyberHome
0831
0714
Tchibo
TCM
EN
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DVD player (Continued)
Manufacturer Setup Codes
DVD player (Continued)
Manufacturer Setup Codes
DVD player (Continued)
Manufacturer Setup Codes
Cytron
D-Vision
Daewoo
Daewoo
International
Dansai
Dantax
Daytek
Dayton
DCE
0651, 0705, 0716
1115
0770, 0705, 0872, 0714
0872
H & B
H&B
Haaz
Hanseatic
Harman/Kardon 0702
HCM
HDT
HE
HenØ
Hitachi
Hiteker
0850
Micromega
Microsoft
Microstar
Minato
Minax
Minerva
Minoka
Mirror
Mitsubishi
Monyka
Mustek
Mx Onda
NAD
Naiko
Neufunk
Nevir
Nordmende
Noriko
NU-TEC
Okano
0539
0522
0831
0752
0713
0705
0770
0752
0713
0665
0730
0651, 1179, 0751
0741
0770, 1004
0665
0770, 0831
0850, 0713
0768, 0751
0741, 0783, 1153
0770, 1115, 0783
0790, 0723
0872
0872
0831
0770, 1115
0490, 1634
0672, 0898, 0788, 0699
0665
0768, 0651, 0751
0713
0717
0651
0672
0826
0831
0788
0788
0705
0730
0713
0573, 0664
0672
Decca
Denon
Home Electronics 0730
Denver
Denzel
Diamond
Digihome
digiRED
Digitor
Digitrex
DIGIXmedia
DiK
Dinamic
DiViDo
DK digital
DMTECH
Dragon
DreamX
Dual
Humax
Hyundai
H_er
0646
0850, 0783
0831, 0651, 0826, 0713
ICP
1153
0788
0697
0783
0695
0665
0730
0699
0695
Ingelen
InterAct
IRT
ISP
Jaton
JDB
Jeken
JMB
JVC
0831
0752
0516
0752
Olidata
Omni
Onkyo
Optimus
Orion
Oritron
Ormond
Otic
0672
0698, 0690
0503, 0612, 1924, 0627
0525
0695
0651
0713
0826
0831, 0768, 0790, 0713
0695
0672, 0852
0490, 1908, 1907, 1910,
1909
0717
0731
0788, 0690
0539, 0503, 0646, 1914
0699
0571, 0525, 0631, 1902,
1900, 0638, 1965
0705
0831
0783
0831
0623, 0539, 0503, 0558,
1940, 1901, 1164, 1988
0783
0713, 0699
0770
0490, 0534
0770
0665
0768, 0716
0770, 0651, 0699, 0672,
0713
0690
0768, 0699
0741, 0591, 1906
0831, 0651
0768, 0716
0539, 0885
0783, 0705
0705
0573
1004
1002, 1108
0503
0723
Karcher
Kendo
Kennex
Kenwood
Kiiro
Kiss
Lawson
Lenco
1151
0730, 0831, 0651, 0790,
0783, 0713, 0665
0713
0768
0751, 0723
0770
Pacific
Durabrand
DVX
Eclipse
Elin
Ellion
Elta
Palladium
Palsonic
Panasonic
0850
Panda
Pelican
Philco
Philips
Phonotrend
Pioneer
0770, 0690, 0850, 0672,
0788, 1151, 1115
0766
0591, 0705
0698
0591
0766
1115, 0788
0651
Lenoxx
Lexia
LG
Lifetec
Limit
Loewe
Logix
Lumatron
Luxman
Luxor
Mad Catz
Magnavox
Magnex
Manhattan
Marantz
Mark
Eltax
Emerson
Encore
Enterprise
Enzer
EuroLine
Fenner
Ferguson
Finlux
Plu2
Powerpoint
Prima
Prima Electronic 0766
Prinz
0850
0872
0766
0651
0831
0705
0651, 1004, 0672
0522
0699
0699
0741
0665
0522
0490, 0766
0770, 0898, 0788
0898
0768, 0752
0699
0730, 0690, 0672, 0713,
0699
0872
0623, 0558
0516, 1004, 0872, 0717
0551, 0651
0731
0741, 0591, 0770, 0672,
0751, 0783
0713
0670
0695
0717
Prism
Firstline
Fisher
Funai
GE
Global Solutions 0768
Global Sphere
Go Video
Proline
Proscan
Prosonic
ProVision
Radionette
Raite
RCA
REC
Red Star
Redstar
Reoc
0705, 0713
0539
0713
0768
0783
Marquant
Matsui
0770
0695, 0651, 0672, 1004,
0713
0788
0713
0730, 0690
0770
0630, 0831, 0651, 0716,
0783
0831
GoldStar
Goodmans
0741, 0591
0730, 0651, 0790, 0713,
0783, 0690, 1004, 0723
0699
0665
0831, 0898
0713, 0716
0717
0539, 0551, 0695, 0651,
0790, 0775, 0723, 1004,
0670, 0713, 0705
Maxdorf
Maxim
MBO
Mecotek
Medion
GPX
Graetz
Gran Prix
Grandin
Greenhill
Grundig
Revoy
Roadstar
Memorex
Metronic
Metz
MiCO
Micromedia
Ronin
Rotel
Rowa
Saba
0690
0571, 0525, 0713
1179, 0751, 0723
0539, 0503
Grunkel
0770
Saitek
EN
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DVD player (Continued)
Manufacturer Setup Codes
DVD player (Continued)
Manufacturer Setup Codes
Toshiba 0503, 1045, 1988
Saivod
Salora
0831
0741
Trans Continens 0826
TRANS-continents 0831, 0826, 0872
Sampo
Samsung
Sansui
0752, 0698
0490, 0573, 1932, 0744
0695, 0768, 0751, 0716,
1153
0670
Transonic
Umax
0672
0690, 1151
United
0730, 1115, 0672, 0826,
0788
Sanyo
Universum
Venturer
Vestel
Vieta
Voxson
Waitec
Walkvision
Welkin
Wellington
Wesder
Wharfedale
Wilson
Windy Sam
WIZE
Woxter
Xenius
0741, 0591, 0713
0790
0713
0705
0730, 0831, 0690
1151
0717
0831
Scan
0850, 0705
0730
0770, 1151, 1115, 0788
0539, 0831, 0651, 0790,
0705, 0788, 1153, 0783
0752
0768
0651, 1036, 0672
0768, 0872, 0713, 0665
0672
0630, 0752
0741, 0717
0717
0788, 0898
0831, 0898
0885
0768, 0716, 0690, 0751
0730, 0768
0766
ScanMagic
Schaub Lorenz
Schneider
Schwaiger
Scientific Labs
Scott
SEG
Shanghai
Sharp
Sherwood
Shinco
Silva
Silva Schneider
Simaudio
Singer
Skymaster
Skysonic
Skyworth
Slim Devices
SM Electronic
Smart
0713
0699
0790, 0752, 0751, 0698
0831
0573
1115
1151
0790
0768
0788
XLogic
XMS
Yakumo
Yamada
Yamaha
Yamakawa
Yukai
1004
0766
0533
1151, 1004, 0872
0490, 0539, 0646
0665, 0872
0730
0730, 0768, 0690
0713, 0705
0831, 0716
0783
0573, 1633, 1981, 1070,
1934, 0864, 1903, 0772
0768
0768
0783
0872
Zenith
0503, 0591, 1135
Sonashi
Sonic Blue
Sony
Game Player
Manufacturer Setup Codes
Xbox 0522
Sony PlayStation2 0533
Soundmaster
Soundmax
Soundwave
Spectra
Standard
Sunkai
Sunwood
Supervision
SVA
0768, 0651, 0788
0770, 0850
0788, 0898
0768
0672
Synn
0768
Tandberg
Tatung
0713
0770
Teac
0571, 0741, 0768, 0790,
0516, 0717
Tec
0898
Technics
Technika
Technisson
Technosonic
Techwood
Tedelex
0490, 1905
0770, 0831, 1115
1115
1115
0713
0690
Telefunken
Teletech
Tensai
0790
0768, 0713
0770, 0651, 0690
0768, 0651, 1036
0571
0551, 0522
0498
Tevion
Theta Digital
Thomson
Thrustmaster
Tokai
0790, 0698, 0898, 0665,
0788
Tokaido
Tokiwa
0698
0716
EN
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DVD player , MD recorder CD player & TV operations
Refer to the following for the type of remote control operations available for each component.
÷ When pressing keys in succession, press each key firmly and be sure
1 Select the input source.
to wait at least 1 second before pressing the next key.
÷ Numeric keys function the same as the numeric keys on the original
remote.
2 Press the keys corresponding to the operations you
desire. Refer to the following sections for details.
These keys can be used to perform the basic operations of KENWOOD and other manufacturers’ components which the setup code for each
component had been entered beforehand. qr
DVD player operation keys
MD recorder operation keys (made by KENWOOD)
RECEIVER
SOURCE
TV
RECEIVER
SLEEP
SOURCE
TV
SOURCE
(Source Power)
SOURCE
(Source Power)
DIMMER
SLEEP
INPUT MODE ACTIVE EQ
DIMMER
INPUT MODE ACTIVE EQ
DIMMER
DISC SEL.
DISC SEL.
Numeric keys/+10 key
(Select tracks)
DISC SEL.
(Select discs)
DISC SKIP
(Select discs)
PAGE %/fi
Numeric keys/+10 key
(Select tracks)
1
4
7
2
5
3
6
1
4
7
2
5
3
6
INPUT SEL.
DISC SKIP
INPUT SEL.
DISC SKIP
+100 key
(Select tracks)
+100 key
(Select tracks)
LAST
LAST
%
PAGE
fi
%
8
9
8
9
PAGE
INFO
INFO
+100
+10
fi
0
(Page down or up)
+100
+10
SUBTITLE
AUDIO
0
ANGLE
MENU
AUDIO
SUBTITLE
ANGLE
MUTE
AUDIO
SUBTITLE
ANGLE
MUTE
TOP MENU
(Title)
TOP MENU
/SETUP
MENU
/SOUND
MENU
/SOUND
TOP MENU
/SETUP
VOLUME
VOLUME
% (Cursor up)
fi (Cursor down)
@ (Cursor left)
# (Cursor right)
ENTER
ENTER
RETURN
/EXIT
ON SCREEN
/GUIDE
RETURN
/EXIT
ON SCREEN
/GUIDE
ON SCREEN
ENTER
8(Pause)
3(Play)
7(Stop)
¶(Record)
8
6
7
8
6
7
RETURN
8(Pause)
3(Play)
7(Stop)
P.CALL
TUNING
P.CALL
TUNING
¢(Skip up)
4(Skip down)
¢(Skip up)
4(Skip down)
4
¢
1
¡
4
¢
1
¡
-
CHANNEL
+
-
+
CHANNEL
CHANNEL
TUNER
DVD
AUX
VIDEO1
F.AUX
VIDEO2
GAME
TUNER
BAND
DVD
AUX
VIDEO1
F.AUX
VIDEO2
GAME
BAND
33(Search)
33(Search)
22(Search)
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
22(Search)
AUTO/MONO
LISTEN MODE
TV INPUT
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
TV INPUT
TV MUTE
DOLBY VIRTUAL
STEREO
LISTEN MODE
TV VOLUME
TV VOLUME
TV VOLUME %/fi
CD player operation keys
TV operation keys (including TVs incorporating VCR)
RECEIVER
SLEEP
SOURCE
TV
RECEIVER
SLEEP
SOURCE
TV
SOURCE
(Source Power)
TV
INPUT MODE ACTIVE EQ
DIMMER
INPUT MODE ACTIVE EQ
DIMMER
DISC SEL.
DISC SEL.
DISC SEL.
1
4
7
2
5
3
6
1
4
7
2
5
3
6
(Select discs)
INPUT SEL.
DISC SKIP
INPUT SEL.
DISC SKIP
Numeric keys/+10 key
(Select tracks)
Numeric keys/+10 key
INFO (Display)
DISC SKIP
(Select discs)
LAST
(Last channel)
LAST
LAST
%
PAGE
fi
%
PAGE
fi
8
9
8
9
INFO
INFO
+100 key
(Select tracks)
+100
+10
+100
+10
0
0
SUBTITLE
(SAP, CC)
AUDIO
SUBTITLE
ANGLE
MUTE
AUDIO
SUBTITLE
ANGLE
MUTE
% (Cursor up)
TOP MENU
/SETUP
MENU
/SOUND
TOP MENU
/SETUP
MENU
/SOUND
MENU
VOLUME
VOLUME
fi (Cursor down)
@ (Cursor left)
# (Cursor right)
ENTER
ENTER
ENTER
8(Pause)
38(Play/Pause)
7(Stop)
RETURN
/EXIT
ON SCREEN
/GUIDE
RETURN
/EXIT
ON SCREEN
/GUIDE
GUIDE
EXIT
8(Pause)
3(Play)
7(Stop)
¶(Record)
8
6
7
8
6
7
P.CALL
TUNING
P.CALL
TUNING
4(Skip down)
¢(Skip up)
4
¢
1
¡
4
¢
1
¡
CHANNEL +/
-
-
CHANNEL
+
-
CHANNEL
+
22(Fast revers)
33(Fast forward)
TUNER
DVD
AUX
VIDEO1
F.AUX
VIDEO2
GAME
TUNER
BAND
DVD
VIDEO1
F.AUX
VIDEO2
GAME
22 (Rewind)
BAND
AUX
33 (Fast forward)
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
TV INPUT
TV MUTE
LISTEN MODE
LISTEN MODE
TV VOLUME
TV VOLUME
TV VOLUME %/fi
EN
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
VCR , Satellite receiver & Cable converter operations
Refer to the following for the type of remote control operations available for each component.
÷ When pressing keys in succession, press each key firmly and be sure
1 Select the input source.
to wait at least 1 second before pressing the next key.
÷ Numeric keys function the same as the numeric keys on the original
remote.
2 Press the keys corresponding to the operations you
desire. Refer to the following sections for details.
These keys can be used to perform the basic operations of KENWOOD and other manufacturers’ components which the setup code for each
component had been entered beforehand. qr
VCR operation keys
Satellite receiver operation keys
RECEIVER
SLEEP
SOURCE
TV
RECEIVER
SOURCE
TV
SOURCE
(Source Power)
SOURCE
INPUT MODE ACTIVE EQ
DIMMER
SLEEP
INPUT MODE ACTIVE EQ
DIMMER
(Source Power)
INPUT SEL.
(Input selection)
INPUT SEL. (TV/ SAT)
(Input Selection)
DISC SEL.
DISC SEL.
1
4
7
2
5
3
6
1
4
7
2
5
3
6
INPUT SEL.
DISC SKIP
INPUT SEL.
DISC SKIP
Numeric keys
LAST
(Last channel)
Numeric keys
LAST
(Last Channel)
PAGE %/fi
(Page down or up)
SUBTITLE
(ALT AUDIO, CC)
LAST
LAST
INFO
(Information)
%
PAGE
fi
%
PAGE
fi
8
9
8
9
INFO
INFO
INFO
(Display)
+100
+10
+100
+10
0
0
SUBTITLE
(SAP, CC)
AUDIO
SUBTITLE
ANGLE
MUTE
AUDIO
SUBTITLE
ANGLE
MUTE
% (Cursor up)
% (Cursor up)
fi (Cursor down)
@ (Cursor left)
# (Cursor right)
TOP MENU
/SETUP
MENU
/SOUND
MENU
TOP MENU
/SETUP
MENU
/SOUND
MENU
VOLUME
VOLUME
fi (Cursor down)
@ (Cursor left)
# (Cursor right)
ENTER
ENTER
ENTER
ENTER
EXIT
RETURN
/EXIT
ON SCREEN
/GUIDE
RETURN
/EXIT
ON SCREEN
/GUIDE
GUIDE
GUIDE
EXIT
8
6
7
8
6
7
8(Pause)
3/8(Play/Pause)
7(Stop)
¶(Record)
22 (Rewind)
33 (Fast forward)
8(Pause)
3(Play)
7(Stop)
¶(Record)
P.CALL
TUNING
P.CALL
TUNING
4
¢
1
¡
4
¢
1
¡
CHANNEL +/
-
CHANNEL
-
CHANNEL
+
-
CHANNEL
+
TUNER
BAND
DVD
VIDEO1
F.AUX
VIDEO2
GAME
TUNER
BAND
DVD
VIDEO1
F.AUX
VIDEO2
GAME
AUX
AUX
33
22
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
TV INPUT
TV INPUT
TV MUTE
TV MUTE
LISTEN MODE
LISTEN MODE
TV VOLUME
TV VOLUME
TV VOLUME %/fi
TV VOLUME %/fi
Cable converter operation keys
Sirius operation keys (made by KENWOOD)
RECEIVER
SOURCE
TV
RECEIVER
SLEEP
SOURCE
TV
SOURCE
(Source Power)
SOURCE
(Source Power)
DIMMER
SLEEP
INPUT MODE ACTIVE EQ
DIMMER
INPUT MODE ACTIVE EQ
DIMMER
INPUT SEL.
(BYPASS, A/B)
(Input Selection)
DISC SEL.
DISC SEL.
1
4
7
2
5
3
6
1
4
7
2
5
3
6
CH SCAN
MEMO
INPUT SEL.
DISC SKIP
INPUT SEL.
DISC SKIP
Numeric keys
LAST
(Last Channel)
PAGE %/fi
(Page down or up)
Numeric keys
LAST
LAST
INFO
(Information)
%
PAGE
fi
%
PAGE
fi
8
9
8
9
CATEGORY
SEARCH
INFO
INFO
+100
+10
0
+100
+10
& ( )
-
0
' , : ? !
DIRECT
CH %
CH fi
AUDIO
SUBTITLE
ANGLE
MUTE
AUDIO
SUBTITLE
ANGLE
MUTE
DELETE
SPACE
SETUP
% (Cursor up)
TOP MENU
/SETUP
MENU
/SOUND
MENU
/SOUND
MENU
TOP MENU
/SETUP
VOLUME
VOLUME
fi (Cursor down)
@ (Cursor left)
# (Cursor right)
(CATEGORY) CAT @
CAT #
ENTER
ENTER
ENTER
ENTER
Power off
RETURN
/EXIT
ON SCREEN
/GUIDE
RETURN
/EXIT
ON SCREEN
/GUIDE
DISPLAY
GUIDE
EXIT
8
6
7
8
6
7
8(Pause)
3(Play)
7(Stop)
¶(Record)
P.CALL
TUNING
P.CALL
TUNING
4
¢
1
¡
4
¢
1
¡
CHANNEL +/
-
-
CHANNEL
+
-
CHANNEL
+
TUNER
BAND
DVD
VIDEO1
F.AUX
VIDEO2
GAME
TUNER
BAND
DVD
VIDEO1
F.AUX
VIDEO2
GAME
AUX
AUX
22
33
BANK
SEEK
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
AUTO/MONO
TV INPUT
DOLBY VIRTUAL
STEREO
TV MUTE
TV MODE
RCV MODE
REMOTE SETUP
TV INPUT
TV MUTE
LISTEN MODE
TV VOLUME
LISTEN MODE
TV VOLUME
TV VOLUME %/fi
EN
56
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
Unplug the power cord from the wall outlet, then plug it back in
while holding down the ON/STANDBY key.
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the microcom-
puter and return the unit to its normal operating condition.
÷ Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
the factory.
Amplifier
Symptom
Remedy
No sound from the speakers.
÷ Connect the components properly referring to "Connecting the speakers".
÷ If muting is ON, release it.
@
∞
÷ If headphones are connected, disconnect them.
¢
8
™
÷ Press the INPUT MODE key to select to full auto mode.
÷ Check if the assignment of digital audio input jacks is correct.
Sound is not output from the speaker, ÷ Connect the components properly referring to "Connecting the speakers".
@
*
or their sound is very small.
÷ See "Speaker settings" and check if the setting for all of the speakers is correct.
÷ Select a surround mode.
÷ Adjust the speaker levels using the test tone.
)
The standby indicator blinks and sound ÷ The protection circuitry is activated because speaker cords are short-circuited. Disconnect the
is not output.
power cord from the AC wall outlet, switch the receiver OFF, remove the short-circuiting and turn
the receiver ON again.
÷ The protection circuitry is activated because the output power is too high. Turn this unit OFF
then ON again and reduce the output volume level.
÷ The protection circuitry activated due to extreme rise in temperature. Turn this unit OFF then
ON again and reduce the output volume level.
÷ The protection circuitry is activated because the impedance of the speakers in use is lower
than specified. Use speakers of the specified impedance.
The audio and video of a different ÷ Check if the assignment of digital audio input jacks and component video jacks is correct.
™
channel are output.
The video is not output.
÷ Connect the video source to be played to this unit and this unit to the monitor TV using the same
type of cords (Component video cords, S VIDEO cords or yellow RCA video cords) correctly. 0
Audio cannot be recorded.
÷ Connect the equipment correctly by referring to "Connecting video components, audio
components" and "Digital connections".
÷ If it is the digital audio that you attempt to record, set up the unit correctly by referring to
"Recording music in REC mode".
0!
§
A video source cannot be recorded ÷ Copy-guarded video software cannot be recorded.
normally. ÷ The S VIDEO and component video inputs cannot be recorded. Connect the video source to
the yellow RCA video jack.
0
When playing a digital source signal, ÷ There are many possible causes for this problem, depending on the type of player used.
the sound is cut off soon after it starts. Switch the input mode to DIGITAL MANUAL during playback of the digital source, and restart the
playback from the beginning. 8
Dolby Digital or DTS audio software ÷ Check if the digital output setting of the digital audio player is correct.
cannotbeplayedinmulti-channelaudio.
The audio of
broadcasting cannot be switched.
a
satellite digital ÷ With certain broadcasting, the audio cannot be switched on the receiver. In this case, switch the
audio on your satellite digital tuner.
Theinputfortheunitissetautomatically ÷ The GAME mode function is activated.
¡
to "GAME" when the unit is turned ON.
EN
57
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Tuner
Symptom
Remedy
Radio stations cannot be received.
÷ Connect an antenna properly.
%
¶
÷ Set the broadcast band properly.
÷ Tune the frequency of the desired station.
Interference.
÷ Install the outdoor antenna away from the road.
÷ Turn off the power to the appliance.
÷ Install the receiver farther away from the TV.
A station which was preset cannot be ÷ Preset a station with a receivable frequency.
received by pressing the corresponding
numeric key.
Remote control unit
Symptom
Remedy
Controlofothercomponentisimpossible. ÷ Register its setup code correctly.
·
%
Remotecontroloperationisnotpossible. ÷ Press the input selector key and select the optimum control mode.
÷ Replace with new batteries.
÷ Point the remote control unit to the remote sensor of the receiver.
÷ Connect the components properly referring to "Setting up the system".
÷ The remote control has not been set to the operation mode for the component you wish to
control. Press the source select keys or SORUCE key to activate the operation mode for the
component you want to control before operation.
‚
For the U.S.A.
Memory back-up function
FCC WARNING
If the power supply to the receiver is shut down for about a day
or more, the following settings will be reset to the initial condi-
tions. Please be careful.
Thisequipmentmaygenerateoruseradiofrequencyenergy.Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
÷Power mode = OFF
÷Volume level =
-
66 dB
÷Dimmer level = OFF (Brightest condition)
÷Broadcast band = FM
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not
installed and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–– Reorient or relocate the receiving antenna.
÷Frequency setting = 87.50 MHz
÷Tuning mode = AUTO
For the U.S.A.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the
point of cable entry as practical.
–– Increase the separation between the equipment and receiver.
–– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
–– Consult the dealer or an experienced radio / TV technician for help.
For the U.S.A.
®
As an ENERGY STAR Partner, Kenwood Corpora-
tion has determined that this products meets the
®
ENERGY STAR guidelines for energy efficiency.
This product can save energy. Saving energy re-
duces air pollution and lowers utility bills.
EN
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (For U.S.A. and Canada)
AUDIO section
Rated power output during STEREO operation
VIDEO section
Input sensitivity / impedance
70 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
Composite (DVD, VIDEO 1, VIDEO 2, FRONT AUX, GAME)
.................................................................................. 1 Vp-p / 75 Ω
S VIDEO (DVD, VIDEO 2)
Luminance signal ................................................ 1 Vp-p / 75 Ω
Chrominance signal ..................................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO (DVD, VIDEO 2)
100 watts per channel minimum RMS, both channels driven,
at 6 Ω from 20 Hz to 20 kHz with no more than 0.5% total
harmonic distortion.
Luminance signal ................................................ 1 Vp-p / 75 Ω
CB/CR-signal .................................................... 0.64 Vp-p / 75 Ω
Effective power output during STEREO operation ...... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω)
Output level / impedance
Effective power output during SURROUND operation
Composite (VIDEO 1, MONITOR OUT) ................. 1 Vp-p / 75 Ω
S VIDEO (MONITOR OUT)
Luminance signal ................................................ 1 Vp-p / 75 Ω
Chrominance signal ..................................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO (MONITOR OUT)
Luminance signal ................................................ 1 Vp-p / 75 Ω
CB/CR-signal .................................................... 0.64 Vp-p / 75 Ω
FRONT ................................................................... 100 W + 100 W
......................... (1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
FRONT ................................................................... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................ 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................ 130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND .......................................................... 100 W + 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
130 W + 130 W
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO .............................. 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev)
Total harmonic distortion (1 kHz)
MONO.......................................................... 0.5% (71.2 dBf input)
STEREO ....................................................... 0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz)
MONO........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Selectivity ( 400 kHz) ................................................................. 70 dB
Stereo separation (1 kHz) ........................................................... 40 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND BACK/SUBWOOFER ..................................... 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
Total harmonic distortion ..........................0.09% (1 kHz, 50 W, 6 Ω)
Frequency response (IHF' 66)
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME)
...... 10 Hz ~ 44 kHz, Sampling frequency 96kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF' 66)
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME) ........... 96 dB
Input sensitivity / impedance
LINE (DVD, VIDEO 1, VIDEO 2, AUX, FRONT AUX, GAME)
.............................................................................. 200 mV / 47 kΩ
Output level / impedance
REC OUT ................................................................ 200 mV / 1 kΩ
PRE OUT (SURROUND BACK) .....................................1 V / 1 kΩ
PRE OUT (SUBWOOFER) .............................................1 V / 1 kΩ
Tone control
AM tuner section
Tuning frequency range..................................... 530 kHz ~ 1,700 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
......................................................... 50 dB (60 dBµ V EMF input)
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
GENERAL
Power consumption .................................................................... 85 W
Standby power consumption ................................................... 0.2 W
Dimensions.......................................................W: 440 mm (17-5/16")
H : 079 mm (3-1/8")
DIGITAL AUDIO section
Sampling frequency
................... 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz
Input level / impedance / wave length
D : 364 mm (14-5/16")
Weight (Net) ....................................................................4.4 kg (9.7 lb)
Optical (VIDEO 1, AUX, GAME)
....................................... (–15 dBm ~ –24 dBm), 660 nm 30 nm
Coaxial (DVD, VIDEO 2)....................................... 0.5 Vp-p / 75 Ω
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
EN
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (For Europe and Australia)
AUDIO section
VIDEO section
Input sensitivity / impedance
For Europe
Composite (DVD, VIDEO 1, VIDEO 2, FRONT AUX, GAME)
............................................................................... 1 Vp-p / 75 Ω
S VIDEO (DVD, VIDEO 2)
Luminance signal ................................................ 1 Vp-p / 75 Ω
Chrominance signal ..................................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO (DVD, VIDEO 2)
Rated power output during STEREO operation ..... 100 W + 100 W
DIN/IEC (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 Ω )
Effective power output during STEREO operation ... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω )
For Australia
Rated power output during STEREO operation
Luminance signal ................................................ 1 Vp-p / 75 Ω
CB/CR-signal ...................................................... 0.7 Vp-p / 75 Ω
70 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
Output level / impedance
Composite (VIDEO 1, MONITOR OUT)
............................................................................... 1 Vp-p / 75 Ω
Rated power output during STEREO operation .. 100 W + 100 W
DIN/IEC (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 Ω )
S VIDEO (MONITOR OUT)
Luminance signal ................................................ 1 Vp-p / 75 Ω
Chrominance signal ..................................... 0.286 Vp-p / 75 Ω
Effective power output during STEREO operation ... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω )
COMPONENT VIDEO (MONITOR OUT)
Effective power output during SURROUND operation
Luminance signal ................................................ 1 Vp-p / 75 Ω
FRONT ................................................................... 100 W + 100 W
......................... (1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
FRONT ................................................................... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................ 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................ 130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND .......................................................... 100 W + 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
130 W + 130 W
CB/CR-signal ...................................................... 0.7 Vp-p / 75 Ω
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (DIN at 75 Ω)
MONO........................ 1.3 µV/ 13.2 dBf (40 kHz dev, S/N 26 dB)
STEREO ................ 45 µV/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO.......................................................... 0.2% (71.2 dBf input)
STEREO ....................................................... 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO........................................................ 65 dB (71.2 dBf input)
STEREO ..................................................... 60 dB (71.2 dBf input)
Selectivity (DIN 300 kHz) .......................................................... 64 dB
Stereo separation (1 kHz) ........................................................... 36 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND BACK/SUBWOOFER ..................................... 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
Total harmonic distortion ..........................0.09% (1 kHz, 50 W, 6 Ω)
Frequency response (IHF' 66)
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME)
...... 10 Hz ~ 44 kHz, Sampling frequency 96kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF' 66)
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME) ........... 96 dB
Input sensitivity / impedance
LINE (DVD, VIDEO 1, VIDEO 2, AUX, FRONT AUX, GAME)
.............................................................................. 200 mV / 47 kΩ
Output level / impedance
REC OUT ................................................................ 200 mV / 1 kΩ
PRE OUT (SURROUND BACK) .....................................1 V / 1 kΩ
PRE OUT (SUBWOOFER) .............................................1 V / 1 kΩ
Tone control
AM tuner section
Tuning frequency range..................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
......................................................... 50 dB (60 dBµ V EMF input)
GENERAL
Power consumption .................................................................... 85 W
Standby power consumption ................................................... 0.2 W
Dimensions.......................................................W: 440 mm (17-5/16")
H : 079 mm (3-1/8")
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
D : 364 mm (14-5/16")
Weight (Net) ....................................................................4.4 kg (9.7 lb)
DIGITAL AUDIO section
Sampling frequency
................... 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz
Input level / impedance / wave length
Notes
1. KENWOOD follows a policy of continuous advancements in develop-
ment. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
Optical (VIDEO 1, AUX, GAME)
....................................... (–15 dBm ~ –24 dBm), 660 nm 30 nm
Coaxial (DVD, VIDEO 2)....................................... 0.5 Vp-p / 75 Ω
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model__________________ Serial Number________________________
EN
60
Download from Www.Somanuals.com. All Manuals Search And Download.
|