Kenwood Stereo System MD 2070 User Manual

STEREO MINIDISC RECORDER

DMF-9020

MD-2070

INSTRUCTION MANUAL

This instruction manual is used to describe multiple models listed above.

Model availability and features (functions) may differ depending on the country and sales

area.

B60-4101-00 00 JA (K,P,T) MC 9808

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

DMF-9020/MD-2070 (En)

Caution : Read the pages marked

carefully to ensure safe operation.

Contents

Introduction.......................................................................................................................................... 2

Before applying power ..................................................................................................................... 2

Safety precautions ............................................................................................................................ 2

Contents ........................................................................................................................................... 3

Accessories ...................................................................................................................................... 4

Special feature .................................................................................................................................. 5

IMPORTANT SAFEGUARDS ............................................................................................................... 6

Information that you should know.................................................................................................... 8

Safety Precautions............................................................................................................................ 8

Maintenance ..................................................................................................................................... 9

System connections .......................................................................................................................... 10

Names and functions of parts .......................................................................................................... 12

Display/Main unit ............................................................................................................................ 12

Remote control unit ........................................................................................................................ 14

Operation of remote control unit..................................................................................................... 15

Playback of Mini Disc ........................................................................................................................ 16

Playing tracks in order from track No. 1 ......................................................................................... 16

Searching a desired track by its title (TITLE SEARCH) ................................................................... 17

Playback from desired track ........................................................................................................... 18

Random playback ........................................................................................................................... 18

Programming ..................................................................................................................................... 20

Programming tracks in a desired order .......................................................................................... 20

Repeated playback ......................................................................................................................... 22

Recording-related keys ..................................................................................................................... 23

AUTO/MANU. key .......................................................................................................................... 23

MONITOR key ................................................................................................................................ 23

REC MODE key .............................................................................................................................. 23

Automatically starting recording when the track starts (SOUND SYNCHRO REC) ....................... 25

Automatically pausing recording when the track ends (REC AUTO PAUSE)................................. 25

Starting recording from the sound before the current sound (MEMORY REC) ............................ 25

Recording (ANALOG input) .............................................................................................................. 26

ANALOG recording ......................................................................................................................... 26

Recording (DIGITAL input)................................................................................................................ 28

DIGITAL recording .......................................................................................................................... 28

Synchro recording with CD playback.............................................................................................. 30

DIGITAL recording and SCMS ........................................................................................................ 30

Editing................................................................................................................................................. 31

Selecting the editing function type................................................................................................. 31

Moving the track being played (TRACK MOVE) ............................................................................. 32

Moving several tracks at a time (QUICK MOVE)............................................................................ 34

Dividing the track being played (TRACK DIVIDE) ........................................................................... 36

Combining the track being played (TRACK COMBINE) ................................................................. 38

Erasing the track being played (TRACK ERASE) ............................................................................ 40

Erasing one or more track at a time (QUICK ERASE) .................................................................... 42

Editing titles .................................................................................................................................... 44

CD text display and copy .................................................................................................................. 48

Changing the displayed contents .................................................................................................... 49

TIME DISPLAY key ......................................................................................................................... 49

METER key ..................................................................................................................................... 49

Timer operations ............................................................................................................................... 50

Timer playback, timer recording ..................................................................................................... 50

In case of difficulty ............................................................................................................................ 51

Specifications ..................................................................................................................................... 54

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

DMF-9020/MD-2070 (En)

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped

to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the

carrier for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

Check that the following accessories are present.

Audio cord (2)

System control cord (1)

Optical fiber cable (1)

Remote control unit (1)

RC-M0905

Batteries (2) (For remote control unit)

R03 ("AAA"-size) batteries

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

DMF-9020/MD-2070 (En)

Special feature

This unit is audio equipment based on the Mini Disc format. The Mini Disc (MD) is an application of the optical and magneto-optical technology and

has the capability to record signals on discs.The operability of the MD is equivalent to the Compact Disc (CD). The MD uses optional non-contact

system so the recordings are not degraded by eternal factors and the discs are never scratched or damaged in playback.

“24 bit Rec & Play D.R.I.V.E.II” for

high-quality recording and playback

ThisunitincorporatestheKENWOOD-original“24-bitRECD.R.I.V.E.II”

system to allow high-quality 24-bit recording of CD as well as analog

sources such as a tuner and analog disk turntable.

The playback circuitry incorporate the KENWOOD-original “24-bit D/

A converter” for high-quality playback.

(D.R.I.V.E.:Dynamic Resolution Intensive Vector Enhancement)

Sampling rate converter

The sampling rate converter incorporated in this unit is compatible

with all digital sources (32 kHz, 44.1 kHz, 48 kHz).

÷48 kHz : Standard mode of DAT. For recording of B mode broadcasting of BS

tuner, etc.

÷44.1 kHz: Standard mode of DAT. For recording of CD, MD, etc.

÷32 kHz : Standard mode and long-hour mode of DAT. For recording of A mode

broadcasting of BS tuner.

Versatile editing functions

In addition to the conventional editing functions (MOVE, DIVIDE,

COMBINE and ERASE), this unit provides more versatile editing

functionssuchastheQUICKMOVEfunctionformovingdesiredtracks

at once or the QUICK ERASE function for erasing desired tracks at

once.

SOUND SYNCHRO REC functions

This unit is equipped with the “SOUND SYNCHRO REC” and “AUTO

CUT” functions for automatically starting and pausing recording

simultaneously with the sound input, the “REC AUTO PAUSE” func-

tion for automatically stopping recording when the end of one track

on the CD is reached, and the “MEMORY REC” function for starting

recording from approximately 6 seconds before the current sound.

DIGITAL REC control

This unit is capable of adjusting the recording level during record-

ing from a digital source as well as from an analog source. The fade-

in/out functions can also be used.

Title input, title search

The “Title input” function allows to assign disc and track titles simply

using the multi-jog dial, the “Title search” function allows to find the

desired track title by checking every title, the “Title copy” function

allows to copy the CD text while recording a CD and the “Preset title”

function allows to preset frequently used titles.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

DMF-9020/MD-2070 (En)

Caution :Read this page carefully to ensure safe operation.

Please read all of the safety and operating instructions before

operating this appliance. Adhere to all warnings on the appliance

and in the instruction manual. Follow all the safety and operating

instructions. These safety and operating instructions should be

retained for future reference.

6. Temperature – The appliance may not function properly

if used at extremely low, or freezing temperatures. The

ideal ambient temperature is above +5°C (41°F).

7. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or

other appliances (including amplifiers) that produce heat.

1. Power sources – The appliance should be connected to a

power supply only of the type described in the instruction

manual or as marked on the appliance. If you are not sure of

the type of power supply to your home, consult your appliance

dealer or local power company. For appliances intended to

operate from battery power, or other sources, refer to the

instruction manual.

8. Electric shock – Care should be taken so that objects do

not fall and liquid is not spilled into the enclosure

through openings. If a metal objects, such as a hair pin

or a needle, comes into contact with the inside of this

appliance, a dangerous electric shock may result. For

families with children, never permit children to put

anything, especially metal, inside this appliance.

2. Power-cord protection – Power-supply cords should

be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, pay

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

Never pull or stretch

the cord.

9. Enclosure removal – Never remove the enclosure. If

the internal parts are touched accidentally, a serious

electric shock might occur.

^3.CAUTION – Polarization – This appliance may be

equipped with a polarized alternating-current line plug (a plug

havingonebladewiderthantheother).Thisplugwillfitintothe

power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

10.Magnetic fields – Keep the appliance away from sources

of magnetic fields such as TV sets, speaker systems,

radios, motorized toys or magnetized objects.

4. Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the appliance

and to protect it from overheating, and these openings must

notbeblockedorcovered. Theapplianceshouldbesituatedso

that its location or position does not interfere with its proper

ventilation.

11.Cleaning – Unplug this appliance from the wall outlet

before cleaning. Do not use volatile solvents such as

alcohol, paint thinner, gasoline, or benzine, etc. to clean

the cabinet. Use a clean dry cloth.

Tomaintaingoodventilation,donotputrecordsoratable-cloth

on the appliance. Place the appliance at least 10 cm away from

the walls.

Do not use the appliance on a bed, sofa, rug or similar surface

that may block the ventilation openings. This appliance should

notbeplacedinabuilt-ininstallationsuchasabookcaseorrack

unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

12.Accessories – Do not place this appliance on an unstable cart,

stand, tripod, bracket, or table. The appliance may fall, causing

serious injury to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or table

recommendedbythemanufacturer,orsoldwiththeappliance.

Anymountingoftheapplianceshouldfollowthemanufacturer’s

instructions, and should use a mounting accessory

recommended by the manufacturer. An appliance and cart

combinationshouldbemovedwithcare.Quickstops,excessive

force, and uneven surfaces may cause the appliance and cart

combination to overturn.

5. Water and moisture – The appliance should not be

used near water - for example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, or near a

swimming pool, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

DMF-9020/MD-2070 (En)

18.Power lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

lightorpowercircuits, orwhereitcanfallintosuchpowerlines

orcircuits.Wheninstallinganoutsideantennasystem,extreme

care should be taken to keep from touching such power lines

or circuits as contact with them might be fatal.

13.Lightning – For added protection for this appliance during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the appliance due to lightning and power-line

surges.

14.Abnormal smell – If an abnormal smell or smoke is

detected, immediately turn the power OFF and unplug

the appliance from the wall outlet. Contact your dealer or

nearest service center.

19.AC outlets – Do not connect other audio equipment

with a power consumption larger than that specified to

the AC outlet on the rear panel. Never connect other

electrical appliances, such as an iron or toaster, to it to

prevent fire or electric shock.

POWER OFF!

15.Damage requiring service – The appliance should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the

appliance.

20. Overloading – Do not overload wall outlets, extension cords,

or integral convenience receptacles as this can result in a risk

of fire or electric shock.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally by

following the instruction manual. Adjust only those controls

that are covered by the instruction manual as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the appliance to its normal operation.

21. Attachment – Do not use attachments not recommended by

the appliance manufacturer as they may cause hazards.

22. Replacement parts – When replacement parts are required,

be sure the service technician has used replacement parts

specifiedbythemanufacturerorhavethesamecharacteristics

as the original parts. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

E. The appliance has been dropped, or the enclosure

damaged.

F. The appliance exhibits a marked change in performance.

23. Safety check – Upon completion of any service or repairs to

this appliance, ask the service technician to perform safety

checks to determine that the appliance is in proper operating

condition.

16.Servicing – The user should not attempt to service the

appliance beyond that described in the instruction

manual. All other servicing should be referred to qualified

service personnel.

17.Outdoor antenna grounding – If an outside antenna is

connected to the appliance, be sure the antenna system

is grounded so as to provide some protection against

voltage surges and built up static charges. Article 810 of

the National Electrical Code ANSI/NFPA 70, provides

information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements

for the grounding electrode. See Figure.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

GROUND

CLAMPS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

NNootteess

GROUND CLAMP

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

1. Item 3 is not required except for grounded or polarized equipment.

2. Item 17 and 18 are not required except for units provided with antenna

terminals.

NEC – NATIONAL ELECTRICAL CODE

3. Item 17 complies with UL in the U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information that you should know

DMF-9020/MD-2070 (En)

Safety Precautions

Care

Wipe periodically dust and dirt attached on the cartridge with a dry

cloth.

Write protect tab

To protect recorded contents against accidental erasure, set the write

protect tab of the disc open. Return the tab to the original position

when you want to record signals on the disc.

Do not touch the disc directly.

Do not touch the disc by opening the shutter with your hand. The

cartridge will be damaged if it is forced open.

Disc back side

Write protect tab

Storage position

Slide open.

(Recording disabled)

Slide close.

(Recording enabled)

Do not leave Mini Discs in place where the temperature and/or

humidity are extremely high (for example, in a place subject to direct

sunlight).

Note related to transportation and movement

Before transporting or moving this unit, carry out the

following operations.

1. Set the POWER key to ON without loading a Mini Disc.

÷Check that no disc is present in the unit.

2. Wait a few seconds and verify that the display shown

appears.

ANALOG DIGITAL

PGM

32kHz

MONITOR

44.1kHz

48kHz

N O

3. Set the POWER key to OFF.

Installation position

Dust countermeasure

The MD recorder is very sensitive to vibrations. It should be installed

in a position subject to as small vibration as possible.

The shutter of the disc cartridge is permanently open while the disc

isloadedintheset. Therefore, topreventdustfrompenetratinginside

the disc, take the disc out of the unit immediately after completion of

recording or playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information that you should know

DMF-9020/MD-2070 (En)

Maintenance

Maintenance of the set

In regard to contact cleaner

When the front panel or case becomes dirty, wipe with a soft, dry

cloth. Do not use thinner, benzine, alcohol, etc. for these agents may

cause discoloration.

Do not use contact cleaners because it could cause a malfunction. Be

specially careful not to use contact cleaners containing oil, for they

may deform the plastic component.

Unplug power cord

Reference notes

Caution on condensation

Memory backup

Condensation (of dew) may occur inside the unit when there is a great

difference in temperature between this unit and the outside.

This unit may not function properly if condensation occurs. In this

case, leave the unit for a few hours with the power left ON, and

restart the operation after the condensation has dried up.

Be specially cautious against condensation in a follow-

ing circumstance:

When this unit is carried from a place to another across a large

difference in temperature, when the humidity in the room where this

unit is installed increases, etc.

The typical period for which the memory can be backed up while the

power cord is unplugged or the POWER key is set to the OFF position

is about 3 weeks, though this may be variable depending on the

surrounding environment.

Incaseoflonghoursofpowerfailureorslippingoutofthepowercord,

thedatarelatedtorecordingandediting(thatisusuallyrecordedatthe

moment the Mini Disc is ejected) may be cleared or destroyed before

it is written in the Mini Disc. Remember that the data lost cannot be

recovered.

After recording or editing, be sure to eject the Mini Disc so that the

recording or editing data can be written in the disc.

CD TEXT

US and foreign patents licensed from Dolby Laboratories Licensing

Corporation.

CD TEXT is a system that is standardized to allow the display of text

data (disc name or song title, artist name etc.) that is recorded on CDs

in addition to music.

By digitally connecting this unit with a CD player (CD TEXT compatible),

the text data of a CD can be copied to an MD.

Presently, however, some CDs are equipped with a copy prevention

code that prohibits the copying of this data. In the case of such CDs,

copying of text data is not possible.

On CDs that do not include the text data copy prevention code, the

operation of “CD text display and copy” is possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

System connections

DMF-9020/MD-2070 (En)

Make connection as shown below. When connecting

the related system components, refer also to the in-

struction manuals of the related components.

Caution: Do not plug in the power lead until all connec-

tions are completed.

Malfunction of microprocessor

If operation is not possible or erroneous display ap-

pears even though all connections have been made

properly, reset the microprocessor referring to “In

case of difficulty”.

Integrated amplifier

SYSTEM CONTROL

REC

PLAY

SL 16 XS-8

SYSTEM CONTROL

DIGITAL

OUTPUT

OPTICAL

System control

cord (CD player

optional)

CD player

SL 16 XS-8

Audio cords ×2

(accessories)

REC

MD recorder

COAX.

OPT.

COAX.

Optical fiber

cable ×1

(accessories)

Optical fiber cable

(optional)

System control cord ×1

(accessories)

SYSTEM

CONTROL

L I N E

D I G I T A L

REC

PLAY

OUT

REC

I N

PLAY

OUT

COAX.

OPT.

TO WALL AC

OUTLET

COAX.

OPT.

COAX.

TEXT

DIGITAL input / output jacks

(OPTICAL)

DIGITAL

REC

PLAY

OUT

COAX.

OPT.

COAX.

OPT.

Remove protective caps

from digital input/output

jacks before use.

Remove cap.

÷Be careful not to lose the protective caps.

÷When connecting the audio cords (cords with pin plugs on each end), insert

the white plugs into the L (Left) jacks and red plugs into the R (Right) jacks.

÷If the system components are equipped with more than one system control

cord connectors, any one of the connectors can be used.

1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.

2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging

connection cords without removal of the power cord can cause malfunctions or damage to the unit.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

System connections

DMF-9020/MD-2070 (En)

About the system control connections

Connecting system control cords after connecting a Kenwood audio component system lets you take advantage of

convenient system control operations.

There are two Kenwoood system control modes. Make connections according to the groups of terminal symbols shown

below.

[XS8] Mode : lets you combine F, f, and ƒ terminals

[SL16] Mode : for [SL16] terminals only

This unit is

compatible.

You can connect this unit via system control if all other equipment using system control connections are set to the [SL16]

mode.

1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system

operations. If your equipment consists of this kind of combination, please do not connect

any system control cords. Even without system control cords, normal operations can be

NNootteess

carried out without affecting performance.

2. Even if your amplifier or receiver does not have a system control terminal, the system

control functions between other components can be implemented partially by connecting

system control cords to the system control terminals of other components. (CD TEXT)

3. Do not connect system control cords to any components other than those specified by

Kenwood. It may cause a malfunction and damage your equipment.

4. Be sure the system control plugs are inserted all the way in to the system control terminals.

(See the figure at right.)

About the system control operations

Remote Control

Lets you operate this unit with the system remote supplied with the amplifier or receiver.

Automatic Operation

Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.

Synchronized Recording

When recording a CD after setting the amplifier's input selector to CD, starting playback on the CD player allows to

start recording automatically in an interlocked operation.

÷Do not operate the CD player during recording of a digital source other than CD; otherwise malfunction may occur.

÷Synchronized recording is not possible while the SOUND SYNCHRO REC, AUTO CUT and REC AUTO PAUSE function is operating.

∞º

Note on connection of optical-fiber cable

÷Insert the optical-fiber cable straight into the connector until it clicks.

÷Be sure to attach the protection cap when the connector is not used.

÷Never bend or bundle the optical-fiber cable.

÷All of the commercially-available optical fiber cables cannot be used

with these units. If there is an optical fiber cable which cannot be

connected to your component, please consult your dealer or nearest

KENWOOD agent.

Theoptical-fibercableisdesignedforuseintheconnection

of the CD player (optional). The digital signal transmission

makes it possible to record the high-quality sound of CDs

without degradation.

D.R.I.V.E.II (Dynamic Resolution Intensive Vector Enhancement) system

This unit incorporates the KENWOOD-original “24-bit REC D.R.I.V.E.II” system so that, not to mention the CD, analog sources such as the tuner and

analog disk turntable can also be recorded with high-quality 24-bit recording.

The digital inputs include both optical and coaxial input jacks so that high-quality recording is possible from any digital equipment.

1 The reproducibility of small signals is improved drastically for an excellent reproduction of fine reverberations of music. The excellence is also

remarkable in the feeling of stability, presence, attack sound and bass reproduction.

2 The D.R.I.V.E.II system maintains the correlation between the musical components of the input and output signals and does not cause any sound

degradation from the principle.

MONITOR function

This unit can be used as a 24-bit D/A converter by setting the MONITOR key.

Refer to “MONITOR key”. £

Download from Www.Somanuals.com. All Manuals Search And Download.

Names and functions of parts

Display / Main unit

DMF-9020/MD-2070 (En)

REPEAT indicator

ANALOG input indicator

PGM (Program) indicator

FADE, IN, OUT and peak level indicators

TITLE and SEARCH indicators

MONO indicator

DIGITAL input 1/2/3 indicators

REPEAT

FADE

OVER (−dB)

ANALOG DIGITAL

∞

OUT

TITLE

PGM

(−dB)

OVER

MONO

32kHz

Sumpling frequency

indicators

COPY

SINGLE

TOTAL

REMAIN

MONITOR

MANUAL

A . PAUSE

44.1kHz

48kHz

Operation indicators

• •

• • • •• • • • • •

REC indicator

Pause indicator

3 Play indicator

SINGLE, TOTAL and

REMAIN indicators

Character information

display

A. PAUSE indicator

MANUAL indicator

COPY indicator

Display

MONITOR indicator

7 8

3 4

REC LEVEL

REC BALANCE

STEREO MINIDISC RECORD ER

JOG DIAL

REC MODE

ENTER

/CHARAC. /TIME DISPLAY

POWER

OFF

–

MIN

MAX

EDIT/

SPACE

TITLE

INPUT SEARCH

DISC LOADING MECHANISM

DOWN

KEYBOARD

PHONES

PUSH SET

FADE/

DELETE

LEVEL

REC INPUT MONITOR

PLAY

TIMER

OFF

REC

24 bit Rec. & Play D.R.I.V.E.

MIN

MAX

! @

)

™ £

^ &

(

∞

Listening through headphones

Plug the stereo headphones (with standard-plug) available in audio

stores into the PHONES jack and adjust the listening volume with the

PHONES LEVEL control on the front panel.

LEVEL

MIN

MAX

Standby mode

While the standby indicator of the unit is lit, a small amount of current is flowing into the unit's internal circuitry to back up the

memory. This condition is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned

ON from the remote control unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Names and functions of parts

DMF-9020/MD-2070 (En)

Description of main unit keys

1POWER key

#PHONES LEVEL knob

: Press to turn the unit ON and OFF.

: Rotate to adjust the volume of the headphones.

: The unit may enter the standby mode when the POWER key

is pressed to turn it ON. This is because the unit holds the

memory that it has been put to the standby mode by the

remote control unit in the last operation.

$ TIMER switch

: This switch is used in timer playback and timer recording.

% REC INPUT key

§•

2Remote control sensor

: Press to switch the recording input line between digital

(optical/coaxial), analog and monaural.

3EDIT/SPACE key

¤u

EDIT

^ MONITOR key

: Press to switch the editing mode ON/OFF.

SPACE

: Press to monitor the sound being input from the source

while the unit is in stop mode.

: Press to insert a blank space character during the title input

operation.

& FADE/DELETEkey

•o

FADE

4TITLE INPUT key

: Press to switch the fade mode ON/OFF.

: Press to switch the title input mode ON/OFF.

DELETE

: During title editing, press to delete a character. During track

editing, press to delete a track.

5TITLE SEARCH key

: Press to switch the title search mode ON/OFF.

: During title editing, press to switch the title change input

* Mini Disc insertion slot

mode between the “overwrite mode” and “insert mode”.

: When a Mini Disc is inserted while the unit is in the standby

mode, it is turned ON automatically.

6JOG DIAL

&(¤

( Eject (0) key

Skip down (4)/ Skip up(¢) knob

: During playback, rotate to skip tracks.

: Press to eject the Mini Disc.

: Before starting recording in record mode, rotate to select the

recording setting adjustment mode.

: During title search, rotate to select a track number.

: During title input, rotate to select a track number or a

character.

) Manual search down (1) key

: This key also functions as the fast reverse key during

playback.

: During an editing mode, press to move the title input

cursor or to scroll the track title display to the left.

: During editing, rotate to select the editing mode or a track

number.

PUSH SET knob

: For use in setting the editing result and input title in memory.

: When pressed in the recording pause mode, the MEMORY

REC function is set and recording starts from the sound

approximately 6 seconds before the current sound.

¡ Manual search up (¡) key

: This key also functions as the fast forward key during

playback.

: During an editing mode, press to move the title input

cursor or to scroll the track title display to the right.

7REC MODE/CHARAC. (Character) key

£t

™Pause (8) key

RECMODE

: Press to let playback or recording pause temporarily.

: Press to switch the recording setting adjustment modes

(record modes) ON/OFF.

CHARAC.

£Stop (7) key

: Press to stop playback or recording.

: Press to select a character group during the title input

operation.

¢Play (3) key

: Press to start playback.

8ENTER/TIME DISPLAY key

‹o

ENTER

∞ Record (¶) key

: Press to start recording.

In stop mode

∞¶ª

: For use in executing the editing and title input operations.

TIME DISPLAY

: Press to switch the time and title display.

: When the ¶key is pressed while a recordable disc is present

in the unit, it enters record-pause mode.

(It enters record-pause mode at the position immediately

after the last existing track.)

In record-pause mode

: When the ¶ key is pressed, the SOUND SYNCHRO REC

standby mode is set.

9REC LEVEL knob

: Rotate to adjust the analog recording level.

0REC BALANCE knob

: Rotate to adjust the analog recording balance.

: In the SOUND SYNCHRO REC standby mode, the set

functions in the same way as in the normal recording pause

mode.

!Keyboard connector

: Connect an IBM PC compatible keyboard (optional) here.

@PHONES jack

: Connect stereo headphones (optional) here.

Download from Www.Somanuals.com. All Manuals Search And Download.

Names and functions of parts

DMF-9020/MD-2070 (En)

Remote control unit

The remote control unit incorporates the basic operation keys as well as a variety of applied operation keys so that it can be

used in a wide range of purposes.

The keys on the remote control unit with the same names as on the main unit have the same function as the keys

on the main unit.

CURSOR / 1, ¡shuttle

ON/STANDBY key

: Press to turn the unit between ON and

STANDBY ( / ) modes.

CURSOR

REMOTE CONTROL UNIT

RC-M0905

: During title input, rotate to move the

cursor.

1, ¡

: Use this during playback for forward and

reverse search.

POWER

EDIT CANCEL

TITLE

INPUT

EDIT

Character editing keys

TIME DISPLAY key

: Press to switch the time and title display.

CHARA. (Character)/ P.MODE (Play

Mode) key

SET

ENTER

TIME

DISPLAY

ABC

DEF

GHI

JKL

MNO

CHARA.

P.MODE

EJECT (0) key

PRS

TUV

WXY

DELETE

CLEAR

CHARA.

: Press to select a character group dur-

ing the title input operation.

P.MODE

: Press to initiate the program mode.

DELETE / CLEAR key

DELETE

: During title input, press to delete a

character.

CLEAR

: Duringediting, presstoclearaselected

track number.

: In program mode, press to clear the

program.

SPACE / CHECK key

SPACE

: Duringtitleinput, presstoinsertablank

space character.

(

)

’,:?!

SPACE

CHECK

+100

+10

Editing mode keys

EDIT CANCEL key

: Press to cancel the editing operation.

TITLE INPUT key

: Press to switch the title input mode ON/

OFF.

TITLE SEARCH key

: Press to switch the title search mode

ON/OFF.

: During title editing, press to switch the

title change input mode between the

“overwrite mode” and “insert mode”.

SET key

: This key is used in the title assignment or

editing operations.

MONITOR

METER

RANDOM

REPEAT

REC MODE AUTO/MANU. AUTO PAUSE REC INPUT

™™/CUR.L

CUR.R/££

: When pressed in the recording pause

mode, the MEMORY REC function is set

and recording starts from the sound ap-

proximately 6 seconds before the cur-

rent sound.

CHECK

: In program mode, press to check the

program contents.

Model:RC-M0905

Infrared ray system

ENTER key

: Press to execute editing or enter the

input title in memory.

EDIT key

: Press to switch the editing mode ON/

OFF.

Recording-relatedkeys

REC MODE key

: Press to switch the recording setting ad-

justment modes ON/OFF.

AUTO/MANU. key

MONITOR key

: Press to monitor the sound being input

from the source while the unit is in stop

mode.

METER key

: Selects whether the track numbers are

to be marked automatically during re-

cording (AUTO) or to be marked manu-

ally after it (MANUAL).

: Press to switch the level meter display

contents.

RANDOM key

: Press to initiate the random play mode.

REPEATkey

: Press to switch the repeat modes for

repeat playback.

Numeric keys

0-9

: Press when selecting a track number

directly.

AUTO PAUSE key

: When this key is pressed, the pause

mode is initiated automatically at the

point where the track number changes

during playback.

: When pressed in the recording or record-

ing standby mode, the AUTO REC PAUSE

mode is turned on.

+10

: Press when selecting a track number 10

or more.

+100

: Press when selecting a track number

100 or more.

: These keys are also used to select a

character or symbol during title editing.

Basic operation keys

: Play key

4 , ¢ : Skip down/up keys

REC INPUT key

: Press to switch the recording input line

between digital (optical/coaxial), analog

and monaural.

: Record key

: Stop key

: Pause key

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of remote control unit

Loading batteries

DMF-9020/MD-2070 (En)

1^{Remove the cover.}

2^{Insert batteries.}

3^{Close the cover.}

÷Insert two R03 ("AAA"-size) batteries following

the polarity indications.

Operation

Plug the power cord into a power outlet, then turn on the

main unit's POWER key to turn the power on. (If in the

standby mode, press the ON/STANDBY key on the remote

control unit.) Once the power has been switched ON, press

the desired operation key.

Remote sensor

÷When pressing more than one remote control keys successively, press

the keys securely by leaving an interval of 1 second or more between

pressing of keys.

30°

Reference operating range

Model: RC-M0905

Infrared ray system

1. The provided batteries are intended for use in operation checking, and their service life may be short.

2. When the remote controllable distance becomes short, replace all batteries with new ones.

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may

NNootteess

occur. In such a case, change the installation position to avoid malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of Mini Disc

Use the following procedure to play an MD in the original

order of tracks from track No. 1.

DMF-9020/MD-2070 (En)

Disc recorded in monaural mode

This unit is capable of playing a Mini Disc recorded in the

“monaural long-play mode.” As the “monaural long-play

mode” requires half the amount of data required for

stereo mode recording, the playing time (recording time)

of the disc is doubled (to max. 148 minutes) from that in

the stereo mode.

Before playing an MD

Set the TIMER switch to OFF.

TIMER

REC

PLAY

OFF

÷A Mini Disc recorded in the “monaural long-play mode” cannot be

played normally with equipment which is not compatible with

monaural playback.

Playing tracks in order from track No. 1

1^{Turn the power ON.}

ANALOG DIGITAL

PGM

32kHz

MONITOR

44.1kHz

48kHz

POWER

- O N – OFF

N O

In case no disc is loaded:

2^{Load a Mini Disc.}

÷Insert a Mini Disc into the slot securely.

÷“READING” blinks while the unit checks the contents of the disc.

÷If a title has been assigned to the disc, that title will be displayed.

18 15

OVER (−dB)

ANALOG DIGITAL

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

0 0 1

: 0 0

In the direction of the arrow.

÷If the “PGM” indicator is lit, press the CHARA. / P.MODE key of the

remote control unit to turn it off.

3^{Start playback.}

÷In a few seconds, playback starts from track No, 1.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

0 0 1

: 1 2

Track No. being played

Elapsed time of track

being played

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of Mini Disc

DMF-9020/MD-2070 (En)

Preparation

Put the MD recorder in stop mode.

Checkthetrackmode. (“PGM”goes

off)

CHARA.

P.MODE

Searching a desired track by its title (TITLE SEARCH)

1^{Press the TITLE SEARCH key.}

TITLE

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

INPUT

32kHz

MONITOR

44.1kHz

48kHz

0 0 1

I T L E

Title

Pressing the TITLE SEARCH key again cancels the

title serach mode.

÷With a track to which no title has been assigned, the track number and

. . . . . . . .

“

” are displayed.

÷Title search is possible in either stop or play mode.

2^{Select the desired title.}

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 3

I T L E

DOWN

U P

To smaller

track No.

To larger

track No.

PUSH SET

Selected track

Characters flow toward the left.

Pressing the TITLE SEARCH key again cancels the

title serach mode.

3^{Start playback.}

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 3

I T L E

Characters flow toward the left.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

0 0 3

: 1 2

Track No. being played

Elapsed time of track

being played

÷Playback starts in a few seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of Mini Disc

DMF-9020/MD-2070 (En)

Playback from desired track

1^{Enter the track mode.}

Each press switches the mode.

1 Track mode

: PGM goes off

2 Program mode : PGM lights up

Press in stop mode.

“PGM” goes off

18 15

OVER (−dB)

CHARA.

ANALOG DIGITAL

∞

P.MODE

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 1

: 0 0

2^{Select the desired track number.}

Press the numeric keys as shown below....

To enter track No. 23

To enter track No. 40

To enter track No. 212 : +100 , +100 ,0,2

0, 0, 3

0, 0, 0, 0, )

ABC

DEF

GHI

JKL

MNO

To start playback directly from a part of a track....

PRS

TUV

WXY

Early part of track No. 7 (7.2)

Middle part of track No. 7 (7.5) : 7)5

Latter part of track No. 7 (7.8) : 7)8

Middle part of current track (.5) : )5

: 7)2

( )

’,:?!

+100

+10

When an IBM PC compatible keyboard (optional) is connected....

To enter track No. 23

To enter track No. 212

2, 3, Enter

2, 1, 2, Enter

Middle part of track No. 7 (7.5) : 7, . , 5

÷If a track NO. which does not exist on the disc is selected while

“READING” is blinking, the last track on the disc will be played.

Random playback

Each press switches the mode.

1^{Enter the track mode.}

1 Track mode

: PGM goes off

2 Program mode : PGM lights up

Press in stop mode.

“PGM” goes off

18 15

OVER (−dB)

ANALOG DIGITAL

∞

CHARA.

PGM

32kHz

P.MODE

MONITOR

44.1kHz

48kHz

0 0 1

: 0 0

2^{Press the RANDOM key.}

÷Random playback is not possible in the program mode.

RANDOM

÷If the RANDOM key is pressed during random playback, random

playback is cancelled and normal playback continues from that point. (If

pressed near the end of the track, playback may skip to the beginning

of the next track.)

÷If the RANDOM key is pressed during normal playback, playback of the

current track stops and random playback begins.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of Mini Disc

DMF-9020/MD-2070 (En)

Skipping tracks

÷Thetrackinthedirectionofthepressedkeyisskipped, andtheselected

track will be played from the beginning.

÷When the 4 key is pressed once during playback, the track being

played will be played from the beginning.

÷To return to the beginning of the previous track to the current track,

press the 4 key in less than about 2 seconds after the restart of the

current track.

Main unit

Remote control unit

JOG DIAL

To skip

backward

forward

DOWN

U P

PUSH SET

To skip

backward

To skip

forward

Searching in a track

Main unit

÷Playbackrestartsfromthepositionwithwhichthekeyisreleasedorthe

jog dial operation is terminated. (If the key was pressed in the pause

mode, the unit returns to the pause mode at that position.)

÷Sound is output when using forward or reverse search during playback.

÷If forward or reverse search is started during play-pause, the disc can

be searched at a high speed but sound is not output.

Remote control unit

™™/CUR.L

CUR.R/££

Reverse

Forward

÷When the reverse search is started during the program mode and the

beginning of the current track is attained, it will be played from the

beginning.

)

Reverse

Forward

To pause playback

To stop playback

Main unit

Remote control unit

Main unit

Remote control unit

÷Each press pauses and plays the MD alternately.

Ejecting the disc

Main unit

Remote control unit

EJECT

N O D I S C

Mini Disc has been ejected.

AUTO PAUSE key (Remote control unit only)

When the AUTO PAUSE key is pressed, playback pauses

after every track. This function is convenient for learning a

foreign language or when time is required after each track.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

A . PAUSE

44.1kHz

48kHz

0 0 2

: 0 0

AUTO PAUSE

“A. PAUSE” lights up

÷Press the 3 key to resume playback.

÷When this function is not required, be sure to press the AUTO PAUSE

key so that the “A. PAUSE” indicator is extinguished.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming

Use the following procedure to program desired tracks in a

desired order. (up to 32 tracks)

DMF-9020/MD-2070 (En)

Preparation

Load a disc.

Put the MD recorder in stop mode.

Programming tracks in a desired order

1^{Initiate the program mode.}

Each press switches the mode.

1 Track mode : PGM goes off

2 Program mode : PGM lights up

CHARA.

“PGM” lights up

P.MODE

18 15

OVER (−dB)

ANALOG DIGITAL

PGM

TOTAL

32kHz

MONITOR

44.1kHz

48kHz

- - -

: 0 0

2^{Select track numbers in the order you want to play them.}

Press numeric keys in the following order.

To select track No. 12:

Selectthetracknumbertobeplayed.

Press in order of 0, 2 key.

ABC

DEF

18 15

OVER (−dB)

ANALOG DIGITAL

PGM

TOTAL

GHI

JKL

MNO

32kHz

MONITOR

44.1kHz

48kHz

0 1 2

- 0 1

PRS

TUV

WXY

Selected track

Programmed order

( )

’,:?!

÷Up to 32 tracks can be selected. “FULL” is displayed when no more

track can be programmed.

+100

+10

÷If you made a mistake, press the DELETE / CLEAR key and enter the

track No. again.

÷An extremely shot track cannot be programmed.

÷“– ✱✱ : ✱✱” is displayed when the total programmed period has

attained 256 minutes or more.

Set the input track number.

CHARA.

P.MODE

÷The input operation is aborted if the CHARA. / P.MODE key is not

pressed while the indicator is blinking.

Repeat steps 1and 2 till the desired tracks have

been programmed, in the desired order.

3^{Start playback.}

18 15

OVER (−dB)

ANALOG DIGITAL

PGM

TOTAL

32kHz

MONITOR

44.1kHz

48kHz

0 1 2

: 2 0

Track No. being played

Total remaining time of the

programmed tracks

÷Tracks will be played in the order they are programmed.

÷When the 4 or ¢ key is pressed during playback, tracks will be

skipped in the direction of the pressed key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming

DMF-9020/MD-2070 (En)

To add a track to the program

Press in stop mode.

ABC

DEF

GHI

JKL

MNO

CHARA.

P.MODE

PRS

TUV

WXY

( )

’,:?!

÷When a track No. is entered, the track will be added to the end of the

existing program.

+100

+10

÷The input operation is aborted if the CHARA. / P.MODE key is not

pressed while the indicator is blinking.

Checking the order of tracks

Track No.

18 15

OVER (−dB)

ANALOG DIGITAL

SPACE

CHECK

PGM

COPY

32kHz

MONITOR

44.1kHz

48kHz

0 1 4

- 0 3

“PGM” blinks

Programmed order

÷Each press displays the next track in the program.

To clear tracks from the program

Clearing tracks from the end

Press in stop mode.

The number of the track that has been cleared is displayed.

18 15

OVER (−dB)

ANALOG DIGITAL

DELETE

CLEAR

PGM

32kHz

MONITOR

44.1kHz

48kHz

- - -

- 1 4

(Example when P-14 has been cleared)

Clearing all tracks

Press in stop mode.

CHARA.

P.MODE

÷The entire program is cleared.

Remote control unit

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming

DMF-9020/MD-2070 (En)

The programmed tracks can be played repeatedly.

Preparation

Put the MD recorder in stop mode.

Repeated playback

To repeat only the programmed tracks

Each press switches the mode.

Program the tracks to be repeated.

1 Track mode

: PGM goes off

1 Initiate the program mode.

2 Program mode : PGM lights up

CHARA.

“PGM” lights up

P.MODE

18 15

OVER (−dB)

ANALOG DIGITAL

PGM

32kHz

MONITOR

44.1kHz

48kHz

2 Select the desired tracks in the desired order.

ABC

DEF

GHI

JKL

MNO

CHARA.

P.MODE

PRS

TUV

WXY

÷All of the programmed tracks will be repeated.

÷In case only one track is programmed, only that track will be repeated.

( )

’,:?!

+100

+10

Repeat the procedure 2.

“REPEAT” lights up

Enter the repeat mode.

REPEAT

PGM

18 15

OVER (−dB)

ANALOG DIGITAL

REPEAT

32kHz

MONITOR

44.1kHz

48kHz

Start playback.

To stop repeated playback

Press the REPEAT key again.

÷The “REPEAT” indicator goes off and the playback following the

current mode (PROGRAM) of the MD player starts.

To repeat the entire disc

Each press switches the mode.

Enter the track mode.

1 Track mode

: PGM goes off

CHARA.

2 Program mode : PGM lights up

P.MODE

Enter the repeat mode.

“REPEAT” lights up

REPEAT

PGM

18 15

OVER (−dB)

ANALOG DIGITAL

32kHz

MONITOR

44.1kHz

48kHz

Start playback.

To stop repeated playback

Press the REPEAT key again.

÷The “REPEAT” indicator goes off and the playback following the

current mode (TRACK) of the MD player starts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording-related keys

AUTO / MANU. key

DMF-9020/MD-2070 (En)

This key is used to select whether track numbers are to be

marked automatically during recording or they are to be

marked manually during or after recording. The track num-

bers can be used to locate the beginning of a track during

playback or programming tracks.

AUTO

Ifano-soundinputhaslastedforthetimesetfortheAUTOTIMEfunction

during recording, the track number will be incremented automatically by

“1”. Usually, use this position for recording. Use this mode when

recording all of the tracks in a CD. When recording music containing a

continuous section with a very low level, for example when recording

classic music, the track number may be incremented by “1” after such

a section. In this case, cancel the track number later. It is recommended

to use the MANUAL mode when recording such a kind of music.

During digital recording of CD, the track number is incremented auto-

matically by “1” according to the data contained in the digital informa-

tion. The no-sound blank is not detected.

Select before starting recording.

AUTO/MANU.

When the CD track number is increased during manual search of a CD,

the track number recorded on the MD may sometimes fail to be

incremented.

A no sound track may sometimes created at the moment the played CD

stops.

(Remote control unit)

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

MANUAL

44.1kHz

48kHz

MANUAL

With this setting, the MD track number is not incremented automatically

during recording. Track numbers can be marked either during editing (by

pressing the EDIT key) or after recording (by executing the TRACK DIVIDE

operation ﬂ). Even when “MANUAL” is set, the AUTO CUT and AUTO

PAUSE functions work if the “AUTO CUT” and “REC AUTO PAUSE”

settings are turned on.

Extinguished in “AUTO”

mode, lit in “MANUAL” mode.

This setting is convenient when recording a CD which has been recorded in

live or which contains very low-level sound such as a classical music CD.

MONITOR key

Press to monitor the sound being input from the source while the unit is in stop mode.

When the REC INPUT is DIGITAL, the sampling rate (48 kHz, 44.1 kHz, 32 kHz) of the input digital signal can be displayed by

pressing this key.

Press in stop mode.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

Main unit

Remote control unit

32kHz

MONITOR

44.1kHz

48kHz

MONITOR

“MONITOR” and “Sampling rate” litghts up

REC MODE key

The recording-related settings can be adjusted precisely by selecting the proper display modes.

Selecting the setting adjustment mode

Each press switches the mode.

Switch the REC MODE on.

1 RECMODE : off

2 RECMODE : on

REC MODE

/CHARAC.

The modes are switched by rotating the JOG DIAL.

D. RECLEVEL?

AUTO CUT?

AUTO TIME?

: Digital recording level setting.

: AUTO CUT on/off selection.

: Setting of the time for detecting a no-sound

blank section during automatic track number

marking.

Select the setting adjustment mode.

JOG DIAL

Set the selection. (by

pressing the JOGDIAL).

JOG DIAL

AUTO LEVEL?

FADETIME?

: Automatic track number marking no-sound

blank detection level and SOUND SYNCHRO

REC,AUTOCUTandRECAUTOPAUSEsound

detection level setting

: Setting of the fading time in fade-in and fade-

out.

DOWN

U P

DOWN

PUSH SET

Adjust the setting value.

JOG DIAL

Set the selection. (by

pressingtheJOGDIAL).

REC=WRITING? : Setting of the UTOC writing after recording.

JOG DIAL

÷Step 3 consists of adjusting the setting of the “Setting adjustment

mode” selected in step 2.

÷The “D.REC LEVEL” and “FADE TIME” settings are not used during

analog source recording.

÷To end the setting adjustment, press the REC MODE/CHARAC. key

again.

DOWN

U P

DOWN

PUSH SET

Tochangeanothersetting,presstheJOGDIAL(PUSH

SET knob).(This returns to step 2 above.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording-related keys

DMF-9020/MD-2070 (En)

Initial display

When “D.REC LEVEL?” is displayed

18 15

OVER (−dB)

ANALOG DIGITAL

∞

(Valid during digital recording)

PGM

32kHz

MONITOR

44.1kHz

48kHz

Pressing the SET key while “D.REC LEVEL?” is displayed initiates

the initial display for the digital recording level adjustment. The

recording level of the currently selected digital input can be varied

by operating the skip up/down knob. The initial setting is “DIN[1]

✱0 dB”, which can be set in the level range between -ϱ and +12 dB.

The figure inside [ ] indicates the current digital input number.

D I N [

]

0 d B

Adjusted value display

18 15 12

OVER (−dB)

ANALOG DIGITAL

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

44.1kHz

48kHz

D I N [ 1 ]

d B

D I N [ 1 ]

1 2 d B

Initial display

When “AUTO CUT?” is displayed

18 15

OVER (−dB)

ANALOG DIGITAL

∞

The “AUTO CUT” function sets “SOUND SYNCHRO REC” to the

pause mode automatically when the sound falls below a certain level

during recording. If the SET key is pressed while “AUTO CUT?” is

displayed, the initial AUTO CUT mode setting display appears. Use

theskipup/downknobtoselectAUTOCUTONorOFF,thenpressthe

SET key to enter that setting. The initial setting is “AUTO CUT ✱OFF”.

PGM

32kHz

MONITOR

44.1kHz

48kHz

A U T O C U T * O F F

Setting display

During recording

18 15 12

OVER (−dB)

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

44.1kHz

48kHz

A U T O C U T

O N

Initial display

When “AUTO TIME?” is displayed

18 15

OVER (−dB)

ANALOG DIGITAL

∞

(This is effective except during digital recording of CD)

PGM

32kHz

MONITOR

44.1kHz

48kHz

Pressing the SET key while “AUTO TIME?” is displayed initiates the

initial display for the no-sound blank detection time adjustment for

automatic track number marking. Use the skip up/down knob to set

the no-sound blank detection time, then press the SET key to enter

that time. The initial setting is “TIME ✱ 2.0 SEC”, which can be set in

the time range between 0.5 and 4.0 seconds set in 0.5-second steps.

T I M E * 2 . 0 S E C

Adjusted value display

18 15 12

OVER (−dB)

ANALOG DIGITAL

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

44.1kHz

48kHz

T I M E

0 . 5 S E C

T I M E

4 . 0 S E C

When “AUTO LEVEL?” is displayed

Initial display

If the SET key is pressed when “AUTO LEVEL?” is displayed, the

initial AUTO LEVEL mode setting display appears. The AUTO

LEVEL mode setting sets the auto track number no-sound blank

detection level as well as the SOUND SYNCHRO REC, AUTO CUT

and REC AUTO PAUSE detection levels, all at once. Use the skip

up/down knob to set the no-sound blank detection level, then

press the SET key to enter that level. This level is set for all the

above functions.The initial setting is “LEVEL ✱0”. The level can be

set between +3 and -3.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

L E V E L

* 0

Adjusted value display

18 15 12

OVER (−dB)

ANALOG DIGITAL

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

44.1kHz

48kHz

L E V E L

+ 3

L E V E L

- 3

Setting

-3

-2

-1

✱0

AUTO TNO

AUTO CUT

REC AUTO PAUSE

Track number increments less easily ←→ Track number increments more easily

Recording pauses less easily

←→ Recording pauses more easily

←→ Recording starts less easily

Recording pauses less easily

SOUND SYNCHRO REC Recording starts more easily

÷During analog recording, noise on the tape, etc., may activate the SOUND SYNCHRO REC function, causing recording to start. If this happens,

raise the setting level.

AUTO TNO (Automatic track number) : Track number increments automatically

When “FADE TIME?” is displayed

Initial display

(Valid during digital recording)

18 15

OVER (−dB)

ANALOG DIGITAL

∞

Pressing the SET key while “FADE TIME?” is displayed initiates

the initial display for the fade time adjustment. The time period of

fade-in and fade-out operations can be varied by operating the

skip up/down knob. The initial setting is “FADE ✱ 3SEC”, which

can be set in the time range between 1 and 10 seconds in 1-second

PGM

32kHz

MONITOR

44.1kHz

48kHz

F A D E

3 S E C

Adjusted value display

18 15 12

OVER (−dB)

ANALOG DIGITAL

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

steps.

Setting range

PGM

32kHz

MONITOR

44.1kHz

48kHz

44.1kHz

48kHz

F A D E

1 S E C

F A D E

1 0 S E C

Fade-out

Fade-in

Initial display

When “REC =WRITING?” is displayed

18 15

1 0

OVER (−dB)

ANALOG DIGITAL

∞

“WRITING” refers to the writing of recording-related data in the

Mini Disc. Pressing the SET key while “REC = WRITING?” is

displayed initiates the initial display for the writing mode setting.

The initial setting is “WRITING ✱ON”. Use the skip up/down knob

to select whether or not to write the UTOC when recording is

completed (ON or OFF), then press the SET key to enter that

setting.

PGM

32kHz

MONITOR

44.1kHz

48kHz

W R I T I N G

* O N

Setting display

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

W R I T I N G

O F F

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording-related keys

DMF-9020/MD-2070 (En)

Recording can be started or paused simultaneously with the

sound and from the sound approximately 6 seconds before

the current sound.

Preparation

Set the recording pause mode.

¶ª

Automatically starting recording when the track starts (SOUND SYNCHRO REC)

Recording starts when a sound above a certain level is input.

This function is particularly convenient when combined

with the AUTO CUT function to record selected tracks.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

Press while in the recording pause mode.

PGM

32kHz

MONITOR

44.1kHz

48kHz

S O U N

Y N C .

÷The sound detection level can be adjusted with the REC MODE “AUTO

LEVEL” setting.

÷When the ¶ key is pressed again, the normal recording pause mode is

set.

When the track starts, recording starts.

÷For some music sources, the beginning of the track may be cut off.

Automatically pausing recording when the track ends (REC AUTO PAUSE)

Recording is automatically paused when the sound input is

below a certain level for over 3 seconds or when the track

number changes during digital recording of a CD.

This function comes in handy when you only want to record

one track from the CD.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

Press while in the recording or recording pause

mode.

MONITOR

A . PAUSE

44.1kHz

48kHz

“A. PAUSE” lights up

÷The sound detection level can be adjusted with the REC MODE “AUTO

LEVEL” setting.

AUTO PAUSE

÷Press the7 key or theAUTO PAUSE key again to cancel the REC AUTO

PAUSE mode.

Starting recording from the sound before the current sound (MEMORY REC)

Recording starts from the sound 6 seconds before the point

at which the key is pressed.

Use this for example when recording radio programs.

÷It is not possible to start recording from the sound 6 seconds before the

currentsoundiflessthan6secondshavepassedintherecordingpause

Press while in the recording pause mode.

mode.

÷When the fade mode is ON, the fade mode is switched OFF before

recording starts.

SET

Recording starts from the sound 6 seconds be-

fore the current sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (ANALOG input)

DMF-9020/MD-2070 (En)

The input jacks connected with audio cords accept analog signals. This unit records the analog signal from the REC IN jacks by

converting it into digital signal. (This recording is simply referred to as analog recording.)

Preparation

Open the write protect tab of the Mini Disc to make it recordable.

Load the Mini Disc.

Check the remaining recording time.

Set the amplifier’s input selector to the source to be recorded.

ANALOG recording

1^{Adjust the settings if required.}

Each press switches the mode.

1 RECMODE : off

Switch the REC MODE on.

REC MODE

/CHARAC.

2 RECMODE : on

Select the setting adjustment mode.

The modes are switched by rotating the JOG DIAL.

D. RECLEVEL?

AUTO CUT?

: Digital recording level setting.

: AUTO CUT on/off selection.

JOG DIAL

AUTO TIME?

: Setting of the time for detecting a no-sound

blank section during automatic track number

marking.

AUTO LEVEL?

FADETIME?

: Automatic track number marking no-sound

blank detection level and SOUND SYNCHRO

REC,AUTOCUTandRECAUTOPAUSEsound

detection level setting

: Setting of the fading time in fade-in and fade-

out.

DOWN

U P

PUSH SET

REC=WRITING? : Setting of the UTOC writing after recording.

÷For details on the setting adjustment modes, see “REC MODE key”.

Set the selection (by pressing the JOG DIAL).

JOG DIAL

÷The “D.REC LEVEL” and “FADE TIME” settings are not used during

analog source recording.

DOWN

PUSH SET

Go to step 2 if setting adjustments are not required.

2^{Select ANALOG or MONO.}

Each press switches the mode.

1 ANALOG : Analog “stereo mode”

2 DIGITAL 1 : Coaxial input mode

3 DIGITAL 2 : Optical input mode

4 DIGITAL 3 : Coaxial input mode

REC INPUT

5 MONO

: Analog “monaural long-play mode”

“ANALOG” lights up

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

A N A L

÷MONO cannot be selected during recording pause.

÷The REC INPUT cannot be changed during pause in the MONO mode.

÷The analog “monaural long-play mode”allows to double the recording

time compared to recording in the stereo mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (ANALOG input)

DMF-9020/MD-2070 (En)

3^{Select “AUTO” or “MANUAL”. (Remote control unit only)}

Each press switches the mode.

1 goes off (AUTO) : Track numbers are marked automatically.

2 MANUAL

: Track numbers can be marked as desired.

AUTO/MANU.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

MANUAL

44.1kHz

48kHz

0 0 1

Extinguished in “AUTO” mode, lit in “MANUAL” mode.

4^{Adjust the recording level. (Main unit only)}

Play the source to be recorded.

Press the ¶ key.

÷ The unit enters record-pause mode automatically when the ¶ key is

pressed.

Adjust the recording level and balance.

Recording level

(inner knob)

Recordingbalance

(outer knob)

REC LEVEL

REC BALANCE

REC LEVEL

REC BALANCE

MIN

MAX

MIN

MAX

÷ Decrease the level if the red segments of the peak level meter light.

To decrease

level

To increase To attenuate

To attenuate

the L CH

level

the R CH

5^{Start recording.}

Recording is not possible if the following characters are displayed.

Press the 8 key.

“DISC FULL”

“PROTECTED”

“PLAY ONLY”

Disc is full

\Erase undesired tracks.

\Close it.

‚w

The accidental erasure protect tab is open.

A playback-only Mini Disc is loaded.

\Load a recordable Mini Disc.

Play the source to be recorded from the beginning.

÷When the EDIT / SPACE key is pressed during recording, a track

number is inserted in that position.

6^{After recording, eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

÷ The eject (0)key is not accepted during recording.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (DIGITAL input)

DMF-9020/MD-2070 (En)

Recording is possible using recordable Mini Discs. When this unit is connected with a component equipped with digital output,

such as a CD player, through a digital cord or optical fiber cable, the signal input through the DIGITAL input jack can be recorded

in the digital format (this recording is referred to as digital recording). Enjoy high-quality sound of digital recording!

Preparation

Open the write protect tab of the Mini Disc to make it recordable.

Load the Mini Disc.

Check the remaining recording time.

Set the amplifier’s input selector to the source to be recorded.

DIGITAL recording

1^{Adjust the settings if required.}

Each press switches the mode.

1 RECMODE : off

Switch the REC MODE on.

REC MODE

/CHARAC.

2 RECMODE : on

Select the setting adjustment mode.

The modes are switched by rotating the JOG DIAL.

JOG DIAL

D. RECLEVEL?

AUTO CUT?

: Digital recording level setting.

: AUTO CUT on/off selection.

AUTO TIME?

: Setting of the time for detecting a no-sound

blank section during automatic track number

marking.

DOWN

U P

PUSH SET

AUTO LEVEL?

: Automatic track number marking no-sound

blank detection level and SOUND SYNCHRO

REC,AUTOCUTandRECAUTOPAUSEsound

detection level setting

FADETIME?

: Setting of the fading time in fade-in and fade-

out.

REC=WRITING? : Setting of the UTOC writing after recording.

Set the selection (by pressing the JOG DIAL).

JOG DIAL

÷For details on the setting adjustment modes, see “REC MODE key”.

DOWN

PUSH SET

Go to step 2 if setting adjustments are not required.

2^{Select one of “DIGITAL 1, 2 and 3 ”.}

Each press switches the mode.

1 ANALOG : Analog “stereo mode”

2 DIGITAL 1 : Coaxial input mode

3 DIGITAL 2 : Optical input mode

4 DIGITAL 3 : Coaxial input mode

REC INPUT

5 MONO

: Analog “monaural long-play mode”

3^{To fade in and fade out the music.}

Each press switches the mode.

Press in stop mode.

1 FADE not lit : Fade mode is off

FADE/

DELETE

2 FADE lit

: Fade mode is on

÷For details on fade-in and fade-out, see “When FADE TIME? is

displayed” (¢) and “Faded recording of MD” (º).

4^{Select AUTO or MANUAL. (Remotecontrol unit only)}

Each press switches the mode.

1 goes off (AUTO) : Track numbers are marked automatically.

AUTO/MANU.

2 MANUAL

: Track numbers can be marked as desired.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (DIGITAL input)

DMF-9020/MD-2070 (En)

5^{Adjust the digital source recording level.}

Play the source to be recorded.

Press the ¶ key.

÷The unit enters record-pause mode automatically when the ¶ key is

pressed.

Adjust the recording level.

÷Decrease the level if the red segments of the peak level meter light.

Set the REC MODE key to ON, select the “D.REC

LEVEL?” setting adjustment display and vary the set-

ting using the JOG DIAL.

6^{Start recording.}

Recording is not possible if the following characters are displayed.

“DISC FULL”

“UNLOCK”

Disc is full

\ Erase undesired tracks.

The digital cord or optical fiber cable is not locked

‚w

in position or connected incompletely (or not

connected).

\ Connect the digital cord or optical fiber cable

properly.

“SCMS ON”

“NotAudio”

Digital recording is inhibited by SCMS.

\ Use analog recording.

The digital signal being input is not an audio

signal.

\ Use analog recording.

“PROTECTED”

“PLAY ONLY”

The accidental erasure protect tab is open.

\ Close it.

The disc in use is a playback-only Mini Disc.

\ Use a recordable Mini Disc.

÷When the EDIT / SPACE key is pressed during recording, a track

number is inserted in that position.

÷When recording is restarted after record-pause, the track number is

incremented automatically by “1”.

7^{Play the source to be recorded.}

÷To play a track with a margin from the beginning, it is recommended to

start playing the source after the time display of the MD recorder has

started the count.

8^{After recording, eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

÷The eject (0) key is not accepted during recording.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

During recording of a CD, the track number may be incremented by “1” at the moment the CD starts to play. This is caused by a signal

contained in the digital signal component of the CD. Unnecessary track numbers can be erased by following the procedure for “Erasing the

track being played (TRACK ERASE).”

‚

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording (DIGITAL input)

DMF-9020/MD-2070 (En)

Synchro recording with CD playback

By connecting this unit with a KENWOOD “

” type amplifier and CD player, which are equipped with system control jacks,

using system control cords, the recording of MD can be started in synchronism with the playback of the CD player.

Set the amplifier’s input selector to CD.

Put the CD player in pause mode.

Select the CD track to be recorded using the 4 or ¢

key.

Put the MD recorder in record-pause mode.

Start playback of the CD player.

÷Synchronized recording is not possible while the SOUND SYNCHRO

REC, AUTO CUT and REC AUTO PAUSE function is operating.

DIGITAL recording and SCMS

Note that the digital recording of Mini Discs is not possible in the following cases.

Note on the sampling rate converter

Three types of digital signals are usually used according to the sampling frequencies. The sampling frequencies vary

depending on the types of digital equipment as shown below.

48 kHz

44.1 kHz : Standard mode of DAT, CD, MD, etc.

32 kHz : Standard and long-hour modes of DAT, A mode broadcasting of BS tuner, etc.

: Standard mode of DAT, B mode broadcasting of BS tuner, etc.

In general, high-quality recording based on digital signal transmission is available only when the sampling frequency of the

source equipment matches that of the recorder equipment. However, this unit incorporates a sampling rate converter so that

it can also record digital signals sampled at 48 kHz and 32 kHz by converting their sampling frequency into the sampling

frequency of MD (44.1 kHz).

The SCMS may be activated with certain type of satellite broadcasting.

(DAT: Digital Audio Tape deck)

Copy using digital

SCMS (Serial Copy Management System)

Copy using digital

input

Digital copy can-

Designed for copyright protection, the SCMS is a pre-

not be repeated.

scription that copying of digital signals as they are in the

digital form between digital audio equipment is allowable

only for one generation.

Copy using analog

input

If the digital source has a copy prohibition code, “SCMS

ON” is displayed and the unit enters record-pause mode.

Copy using analog

input

Copy using analog

input

Copy using digital

input

Copy using digital

input

Faded recording of MD

The fade mode of the unit is switched on/off every time the

FADE/DELETEkeyispressed.Thefademodeisnotactivated

when the D.REC LEVEL is no more than -38 dB.

Fade-in and fade-out

Fade-out : Ending of music after gradual decrease in volume.

Fade-in : Beginning of music after gradual increase in volume.

Recording with fade-in:

When recording is initiated during stop (or pause) in the fade mode,

recording starts from ATT = - ϱ, increases to the previously set

recording level and continues at this level.

Gradual sound

decrease

Gradual sound

increase

Recording with fade-out:

When recording is stopped during recording in the fade mode, the

current recording level decreases to ATT = - ϱ then recording stops.

If recording is continued until the end of disc, fade-out occurs automati-

cally before the unit stops recording.

1st track

Fade-out

2nd track

Fade-in

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

After recording of a commercially-available recordable Mini

Disc, the recording can be edited in various ways. Note that

it is impossible to edit a playback-only Mini Disc.

Limitation of functionality due to MD standard

Some functions are limited due to the restrictions im-

posed by the MD standard. Before considering the symp-

toms as a sign of trouble with the unit, please read

(Editing is not possible while the “PGM” indicator is lit.)

The MD recorder acts based on the data loaded from the

disc into the memory. As this data is written in the disc at

the moment it is ejected, be sure to eject the disc every

time after the title input or editing operation.

“Symptoms related to MD standard”.

Selecting the editing function type

Reordering tracks by moving them

Dividing a track, combining two tracks

Moving the track being played (TRACK MOVE) ¤

Dividing the track being played (TRACK DIVIDE) ﬂ

Moving several tracks at a time (QUICK MOVE) ›

Combining the track being played (TRACK COMBINE)

Erasing desired tracks (QUICK ERASE)

Erasing one or more track at a time (QUICK ERASE)w

Erasing the track being played (TRACK ERASE) ‚

ALL ERASE

Editing titles

Titles can be assigned to Mini Discs and tracks can have titles, and these titles can be changed or cleared later.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

This procedure shows you how to select and move (insert) a track to the track number you desire. The surrounding tracks are

renumbered automatically.

Preparation

Play the track to be moved.

PresstheEDIT/SPACEkeytoswitch

the editing mode on.

Moving the track being played (TRACK MOVE)

1^{Select “MOVE”.}

The modes are switched by rotating the JOG DIAL.

1 DIVIDE? : Dividing a track

2 COMBINE? : Combining tracks

Select “MOVE”.

JOG DIAL

3 ERASE?

: Erasing track(s)

4 MOVE?

: Moving (reordering) tracks

÷Editing is aborted if no operation has been performed for 8 seconds.

DOWN

U P

PUSH SET

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

M O V E

Set the selection (by pressing the JOG DIAL).

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 1\ 0 2 ?

DOWN

PUSH SET

Track being played

2^{Select the move destination.}

Select the move destination (the new track num-

ber to be assigned to the track being played).

Example of MOVE: To move track No. 1 to track No. 7

Destination track No.

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 1\ 0 7 ?

Track to be moved

DOWN

U P

To decrease

track No.

To increase

track No.

PUSH SET

Set the selection (by pressing the JOG DIAL).

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

o k

DOWN

PUSH SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

3^{Execute the track reordering operation.}

Display after execution

“EDIT NOW!” : When editing is in progress

ENTER

/TIME DISPLAY

“COMPLETE!” : When editing is completed successfully

“CAN’T EDIT” : When editing is incomplete

÷It takes a while until the execution completes.

÷If you execute an editing operation by mistake, the condition before

editing can be recovered by performing the “EDIT CANCEL” opera-

tion.

‹

4^{Eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Image of track moving

Track to be moved

Selected destination

When moved to a position after current position

When moved to a position

before current position

Inserted immediately after destination track

Inserted immediately before destination track

To cancel the editing results (EDIT CANCEL)

To return the Mini Disc to the condition before it was loaded

in the unit, perform the following key operations before

ejecting the disc.

After canceling, the editing operation can be restarted from

the beginning.

EDIT CANCEL

ENTER

SET

÷Note that editing cannot be canceled once the recording operation has been performed after “DISC

ERROR” has been displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

Use the following procedure to change the current order of

tracks by selecting a desired order and moving the tracks

together.

Preparation

Put the MD recorder in stop mode.

PresstheEDIT/SPACEkeytoswitch

the editing mode on.

Moving several tracks at a time (QUICK MOVE)

1^{Select “Q.MOVE”.}

The modes are switched by rotating the JOG DIAL.

Select “Q.MOVE”.

1 Q. MOVE? : Moving (reordering) tracks

2 Q.ERASE? : Erasing track(s)

JOG DIAL

÷ Editing is aborted if no operation has been performed for 8 seconds.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

DOWN

U P

Q . M O

PUSH SET

Set the selection (by pressing the JOG DIAL).

Title scrolling

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

DOWN

/|0 0

1 ? A B

PUSH SET

÷Press the EDIT/SPACE key again to abort the editing operation.

2^{Select the track numbers to be moved.}

Selected track No.

Select a track number.

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

| 0

4 ? A B C

DOWN

U P

÷Only the last selected track can be cleared by pressing the FADE/

DELETE key of the remote control unit. (To clear all of the selected

tracks, cancel editing and restart the operation from the beginning.)

÷The orders of tracks can be confirmed by pressing the 1 key (or ¡

key) of the remote control unit.

To decrease

To increase

track No.

PUSH SET

track No.

Set the selection (by pressing the JOG DIAL).

Next track No.

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

DOWN

MONITOR

44.1kHz

48kHz

PUSH SET

| 0

0 0 4 /

5 ? A B C

Repeat steps 1 and 2 until all tracks have been ar-

ranged in the desired order.

Selected track No.

3^{End the selection of the track numbers to be moved.}

ENTER

/TIME DISPLAY

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

4^{Select the move destination.}

Display when tracks are moved at the top of all tracks

Select the move destination track number.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

JOG DIAL

T O P /

? / 0 1

Display when tracks are moved between two track Nos.

DOWN

U P

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PUSH SET

To increase

track No.

To decrease

track No.

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 2 /

? / 0 5

Display when tracks are moved at the end of all tracks

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 1 8 /

? / N D

Set the movement destination (by pressing the

JOG DIAL).

When set

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

DOWN

44.1kHz

48kHz

PUSH SET

o k

5^{Execute the track reordering operation.}

Display after execution

“EDIT NOW!” : When editing is in progress

“COMPLETE!”: When editing is completed successfully

“CAN’T EDIT” : When editing is incomplete

ENTER

/TIME DISPLAY

÷It takes a while until the execution completes.

÷Do not press the 0 or “POWER” key while “COMPLETE!” is blinking,

otherwise the track reordering may be interrupted in the middle.

÷If you execute an editing operation by mistake, the condition before

editing can be recovered by performing the “EDIT CANCEL” opera-

tion.

‹

6^{Eject the Mini Disc .}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Image of track insertion

23 24 25 26 27 28 29

Track No.

3 6

23 24 25 27 28 29

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

Use the following procedure to divide a track into two by inserting a track number in its middle. For example, by inserting an

additional track number before the passage you are specially fond of, it is easy to skip to there when you play the disc later.

Note that the track numbers of the tracks located after the divided track are automatically incremented.

The preview function allows to fine-adjust the track division point by playing the divided part repeatedly.

Preparation

Limitation of functionality due to MD standard

Some functions are limited due to the restrictions im-

posed by the MD standard. Before considering the symp-

toms as a sign of trouble with the unit, please read

Play the MD track to be divided.

PresstheEDIT/SPACEkeytoswitch

the editing mode on.

“Symptoms related to MD standard”.

Dividing the track being played (TRACK DIVIDE)

The modes are switched by rotating the JOG DIAL.

1^{Select “DIVIDE”.}

1 DIVIDE?

: Dividing a track

2 COMBINE? : Combining tracks

Select “DIVIDE”.

3 ERASE?

: Erasing track(s)

JOG DIAL

4 MOVE?

: Moving (reordering) tracks

÷ Editing is aborted if no operation has been performed for 8 seconds.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

DOWN

U P

44.1kHz

48kHz

D I V I

PUSH SET

Set the selection (by pressing the JOG DIAL).

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 3

4 ?

DOWN

PUSH SET

When preview is not required, press the ENTER key

once (so that “ok?” is displayed), then go to step 3.

2^{Preview the result.}

REPEAT

TITLE

PGM

DISC

START

18 15

OVER (−dB)

ANALOG DIGITAL

∞

Enter the DIVIDE mode.

JOG DIAL

32kHz

P.C.

SINGLE

TOTAL

REMAIN

MONITOR

44.1kHz

48kHz

D I V I D E + 0 0

DOWN

PUSH SET

JOG DIAL

Execute preview.

REPEAT

TITLE

PGM

DISC

START

18 15

OVER (−dB)

ANALOG DIGITAL

∞

32kHz

P.C.

SINGLE

TOTAL

REMAIN

MONITOR

44.1kHz

48kHz

P R E V I E W 2 S E C

DOWN

PUSH SET

÷The first 3 seconds after the division point is repeated.

÷If preview is started at the end of a track, the preview continues till the

next track (the first track if it is started in the last track), but the part in

the next track cannot be divided by TRACK DIVIDE.

Fine-adjust the division point.

JOG DIAL

REPEAT

TITLE

PGM

DISC

START

18 15

OVER (−dB)

ANALOG DIGITAL

∞

32kHz

P.C.

SINGLE

TOTAL

REMAIN

MONITOR

44.1kHz

48kHz

D I V I D E + 0 4

÷Fine adjustment is possible while monitoring the sound.

DOWN

U P

÷The dividing point can be fine-adjusted only in the forward direction

from the point where the EDIT / SPACE key was pressed initially, in 32

steps and for about 60 ms (6/100 sec.) per step.

PUSH SET

It is recommended to start fine adjustment from slightly before the

initial division point.

Establish the division point.

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

o k

DOWN

PUSH SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

3^{Execute the track divide operation.}

Display after execution.

“EDIT NOW!” : When editing is in progress

ENTER

/TIME DISPLAY

“COMPLETE!” : When editing is completed successfully

“CAN’T EDIT” : When editing is incomplete

÷It takes a while until the execution completes.

÷The track is divided into two tracks.

÷The unit enters pause mode at the second track.

÷There is no blank space left between the two tracks.

÷Track division may sometimes be impossible due to the limitations of

the MD standard.

÷If you execute an editing operation by mistake, the condition before

editing can be recovered by performing the “EDIT CANCEL” opera-

Up to 255 track numbers can be inserted additionally

by repeating 1 to 3 for each of them.

tion.

‹

4^{Eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Image of track division

Image of preview

Should be approx.

2 sec. or longer.

The point where the EDIT / SPACE key is pressed

Approx. 2 sec.

Fine adjustment range in 32 steps

Divided track (second half)

Divided track (first half)

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

Use the following procedure to combine two tracks into one by deleting a track number. This operation allows to connect

several tracks or a piece of music divided into several parts. After this operation, the track numbers of tracks located after the

combined tracks are decreased automatically.

Preparation

Limitation of functionality due to MD standard

Some functions are limited due to the restrictions im-

posed by the MD standard. Before considering the symp-

toms as a sign of trouble with the unit, please read

Play one of the MD tracks to be

combined.

PresstheEDIT/SPACEkeytoswitch

the editing mode on.

“Symptoms related to MD standard”.

Combining the track being played (TRACK COMBINE)

1^{Select “COMBINE”.}

The modes are switched by rotating the JOG DIAL.

When pressed in play mode:

Select “COMBINE”.

JOG DIAL

1 DIVIDE?

: Dividing a track

2 COMBINE? : Combining tracks

3 ERASE?

: Erasing track(s)

4 MOVE?

: Moving (reordering) tracks

÷ Editing is aborted if no operation has been performed for 8 seconds.

DOWN

U P

PUSH SET

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

C O M B

Set the selection (by pressing the JOG DIAL).

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 5 +

6 ?

DOWN

PUSH SET

Track being played

Next track

To combine the track with the next track to it, go to step

÷To combine two tracks during playback, press the EDIT/SPACE key

while the first track is being played. (The track being played and the

track immediately after it will be combined.)

÷If the operation is started during playback, it pauses automatically.

2^{Select the track to be combined.}

To combine track Nos. 5 and 7 :

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 5 +

7 ?

DOWN

U P

To decrease

track No.

To increase

track No.

PUSH SET

3^{Set the selection.}

18 15

OVER (−dB)

ANALOG DIGITAL

∞

JOG DIAL

PGM

32kHz

MONITOR

44.1kHz

48kHz

o k

DOWN

PUSH SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

4^{Execute the track combine operation.}

Display after execution

“EDIT NOW!” : When editing is in progress

“COMPLETE!” : When editing is completed successfully

ENTER

/TIME DISPLAY

“CAN’T EDIT” : When editing is incomplete

÷It takes a while until the execution completes.

÷ If editing has been started during playback, playback restarts automati-

cally from the current track.

÷Track combining may sometimes be impossible due to the limitations

of the MD standard.

÷If you execute an editing operation by mistake, the condition before

editing can be recovered by performing the “EDIT CANCEL” opera-

tion.

‹

5^{Eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Image of track combination

Should be approx.

2 sec. or longer.

Track No. is adjusted.

Track No. and title of the second track are cleared.

Track No. and title of the first track are left.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

Use the following procedure to erase a single track being

played.

Be careful in using this operation because a track may not be

recovered once it has been erased.

Preparation

Play the MD track you wish to erase.

PresstheEDIT/SPACEkeytoswitch

the editing mode on.

Erasing the track being played (TRACK ERASE)

1^{Select “ERASE”.}

The modes are switched by rotating the JOG DIAL.

1 DIVIDE? : Dividing a track

2 COMBINE? : Combining tracks

Select “ERASE”.

JOG DIAL

3 ERASE?

: Erasing track(s)

4 MOVE?

: Moving (reordering) tracks

÷Editing is aborted if no operation has been performed for 8 seconds.

DOWN

U P

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PUSH SET

PGM

32kHz

MONITOR

44.1kHz

48kHz

E R A S

Set the selection (by pressing the JOG DIAL).

Track No. to be erased

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

DOWN

0 0 3

PUSH SET

2^{Confirm that the track has been erased.}

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

o k

DOWN

PUSH SET

Confirm that the track has been erased.

3^{Execute the track erasure operation.}

Display after execution

“EDIT NOW!” : When editing is in progress

“COMPLETE!” : When editing is completed successfully

“CAN’T EDIT” : When editing is incomplete

ENTER

/TIME DISPLAY

÷It takes a while until the execution completes.

÷The track being played is erased (together with its track title).

÷If you execute an editing operation by mistake, the condition before

editing can be recovered by performing the “EDIT CANCEL” opera-

tion.

‹

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

4^{Eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Image of track erasure

Track to be erased

Track Nos. are adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

Use the following procedure to erase desired tracks in stop

mode.

Be careful in using this operation because tracks may not be

recovered once they have been erased.

Preparation

Put the MD recorder in stop mode.

PresstheEDIT/SPACEkeytoswitch

the editing mode on.

Erasing one or more track at a time (QUICK ERASE)

1^{Select “Q.ERASE”.}

The modes are switched by rotating the JOG DIAL.

Select “Q.ERASE”.

1 Q. MOVE? : Moving (reordering) tracks

JOG DIAL

2 Q.ERASE? : Erasing track(s)

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

Q . E R A S

DOWN

U P

PUSH SET

Set the selection (by pressing the JOG DIAL).

Confirmation of all track erasure

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

DOWN

A L L ? ÷ ÷

PUSH SET

If you want to clear all tracks in a MD, go to step 3.

2^{To erase desired tracks.}

Selected track

Select a track number to be erased.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

JOG DIAL

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 5 ? A B C

Title scrolling

DOWN

U P

÷Only the last selected track can be cleared by pressing the FADE/

DELETE key of the remote control unit. (To clear all of the selected

tracks, cancel editing and restart the operation from the beginning.)

÷The orders of tracks can be confirmed by pressing the 1 key (or ¡

key) of the remote control unit.

PUSH SET

Set the selection.

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 5 -

6 ?

DOWN

PUSH SET

Erase desired tracks by repeating steps 1 and 2.

Next track

Selected track

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

3^{End the selection of the tracks to be erased.}

ENTER

/TIME DISPLAY

18 15

OVER (−dB)

ANALOG DIGITAL

∞

PGM

32kHz

MONITOR

44.1kHz

48kHz

o k

4^{Execute the track erasure operation.}

Display after execution

“EDIT NOW!” : When editing is in progress

“COMPLETE!” : When editing is completed successfully

ENTER

/TIME DISPLAY

“CAN’T EDIT” : When editing is incomplete

÷It takes a while until the execution completes.

÷If you execute an editing operation by mistake, the condition before

editing can be recovered by performing the “EDIT CANCEL” opera-

tion.

‹

5^{Eject the Mini Disc.}

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Image of track deleting (QUICK ERASE)

Erasing all tracks:

Erasing desired tracks:

When “DISC ERROR” is displayed

18 15

OVER (−dB)

ANALOG DIGITAL

∞

If “DISC ERROR” is displayed with a Mini Disc which has

been known to be normal, re-load the Mini Disc before

proceeding to the ALL ERASE operation. This may makes it

possible to read the Mini Disc contents.

PGM

32kHz

MONITOR

44.1kHz

48kHz

D I S C E R R O R

÷Once the “DISC ERROR” message has been displayed, the “ALL

ERASE” operation is possible but “EDIT CANCEL” operation is not

possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

When titles are assigned to a disc and its tracks, the titles

cannot only be displayed during playback but title search

(searching a track by the title) is also made possible. The

assigned titles can be changed or deleted with the same

procedure.

About preset titles

Easy title editing is possible by memorizing titles that you

often use or titles that you like at the optional preset titles.

Changing preset title names to new ones and inputing

those titles to the mini disc is carried out with the

“Editing titles” operation.

Preparation

Initial settings are as follows.

Put the MD recorder to stop, play or

record mode.

PRE1:Pops,PRE2:Rock,PRE3:Classic,PRE4:Jazz,PRE5:Disco,

PRE6:BestHits,PRE7:AirCheck,PRE8:No.,PRE9:Vol.

÷To return a changed preset title to the initial setting, please refer to

Press the TITLE INPUT key to switch

the title input mode on.

“Operation to reset”.

Editing titles

1^{Select the item to be edited.}

The modes are switched by rotating the JOG DIAL.

1 DISC

2 001

: Disc title

: Track title

3 PRE1-PRE9 : Preset title

4 ALLERASE? : Erasing both disc and track titles

Main unit

Remote control unit

Select whether the disc title or track title is

input.

5 CDtext LOAD?: Preparing for CD text copy (during stop)

÷“CDtext LOAD?” is displayed only when a KENWOOD CD player with

the CD text compatibility is connected to this unit.

÷Editing is aborted if no operation has been performed for 8 seconds.

JOG DIAL

To edit a disc title: Select “DISC”.

To return

To advance

30 21

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

MONITOR

44.1kHz

48kHz

D I S C A B C D E

DOWN

U P

PUSH SET

To edit a track title: Select the desired track number.

To return

To advance

30 21

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

MONITOR

44.1kHz

48kHz

0 0 3

- - - - -

Set the selection.

Press the JOG DIAL.

To edit the preset titles: Select the desired preset number.

JOG DIAL

30 21

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

SET

MONITOR

44.1kHz

48kHz

P R E 4 J a z z

DOWN

PUSH SET

To erase both disc and track titles.

To abort operation, press the TITLE INPUT key again.

30 21

18 15 12

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

MONITOR

44.1kHz

48kHz

A L L E R A S E ?

To input a title, go to step 2.

To change or delete a title, go to step 3.

Characters usable in title editing

F10

F11

F12

RECMODE/CHARAC.

PLAY

PAUSE

REC

The following alphabets and symbols (ASCII codes) can be

selected for use in title editing. Titles can also be input by

connecting an IBM PC compatible keyboard (optional) to the

keyboard connector on the front panel.

STOP

BACKSPACE

Deleting the character before the cursor

during title input

Uppercase alphabets x 26 : ABCD...WXYZ

Lowercase alphabets x 26 : abcd...wxyz

SHIFT+CAPSLOCK Switching the uppercase/lowercase let-

ters during title input

Numerals x 10

Space & symbols x 26

: 0123456789

: !"#$%&'()✱+,-./:;<=>`?@^_

ENTER

SPACE

INSERT

ENTER

Entering a blank space during title input

Switching overwriting/insertion during

In addition to the entry of above characters, the keyboard

can also control the following functions.

title input

Keyboard key Control/editing function

DELETE

Deleting the character indicated by the

cursor during title input

SKIPUP

SKIP DOWN

TITLE INPUT

TITLE COPY (Copying displayed title data

↑

↓

→

←

into PRE 9)

TITLEPASTE(CopyingtitledatafromPRE9)

SET

EDIT/SPACE

RANDOM

TITLESEARCH

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

2^{Input the title.}

Main unit

Remote control unit

Select a character group.

One of the following character groups can be selected.

REC MODE

/CHARAC.

• A to Z and space (a blank character):

• a to z and space:

• 0 to 9, symbols, preset titles (x 9):

CHARA.

P.MODE

Select a character.

The characters can be switched by rotating the JOG DIAL.

• A to Z and space (a blank character):

ABC

DEF

¤ A ¤ B ¤ C ¤ D ¤ E ¤ F ¤ E E E E E ¤

GHI

JKL

MNO

PRS

TUV

WXY

JOG DIAL

• a to z and space:

¤ a ¤ b ¤ c ¤ d ¤ e ¤ f ¤ E E E E E ¤

( )

’,:?!

+100

+10

• 0 to 9, symbols, preset titles (x 9):

DOWN

U P

¤ 0 ¤ 1 ¤ E E E ¤ 9 ¤

¤ ! ¤ h E E E

PUSH SET

PRE9 ' E E E ' PRE1 ' _ ' ^

' @ ' ?

To return

To advance

Example of new title input:

Initial display

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

Total number of title characters

Up to 1792 characters can be input per disc and up to 80

characterscanbeinputpertrack.(Incaseofalphanumeric

and symbol characters)

PGM

32kHz

MONITOR

44.1kHz

48kHz

B C

A space (blank character) also required the same amount

of data as alphanumeric characters. When deleting a title,

it is not recommended to overwrite spaces on previous

characters but use the DELETE function.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

MONITOR

44.1kHz

48kHz

|J L M

Selected character

÷The display can be scrolled so that any character (in a single group) can

be selected.

÷Characters can also be selected directly from the remote control unit by

using the numeric keys.

(Example: Each press of the 2 key switches characters in order of

A = B = C.)

÷The cursor can be moved to the left and right with the1 and ¡ keys.

÷Pressing the TITLE SEARCH key during title input switches the input

mode between the “overwrite mode” and “insert mode”.

Set the selected character.

Press the JOG DIAL.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

JOG DIAL

TITLE

PGM

32kHz

SET

MONITOR

44.1kHz

48kHz

|J L M

DOWN

PUSH SET

÷Pressing the EDIT/SPACE key inserts a blank space character.

Repeat steps 1 to 3till all of the title characters have been

input.

This procedure is continued on next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

To change or erase a title.

Main unit

Remote control unit

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

Move the character to the desired character

(to be changed).

32kHz

MONITOR

44.1kHz

48kHz

K E N O O | A B C

™™/CUR.L

CUR.R/££

To return

To advance

Selected character blinks.

÷If the title to be changed is too long to be displayed on the display

section, press the 1 or ¡ key to scroll the display so that the

characters hidden until then appear.

÷Press the FADE/DELETE key to erase the selected character.

To return

To advance

Select a character group.

One of the following character groups can be selected.

• A to Z and space (a blank character):

• a to z and space:

REC MODE

/CHARAC.

CHARA.

P.MODE

• 0 to 9, symbols, preset titles (x 9):

÷The display can be scrolled so that any character (in a single group) can

be selected.

Select the “overwrite mode” or “insert mode”.

Each press switches the mode.

1 Overwrite mode : Inputs a character by replacing the existing

character.

TITLE

INPUT

TITLE

2 Insert mode

: Inputs a character before or after an exist-

ing character.

INPUT

Cursor types

Overwrite mode : Larger cursor “

Insert mode : Smaller cursor “

”

Select a character.

ABC

DEF

Selecting the correct character (in overwrite mode):

JOG DIAL

The cursor moves.

GHI

JKL

MNO

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

MONITOR

PRS

TUV

WXY

44.1kHz

48kHz

K E N O O | W X Y

DOWN

U P

( )

PUSH SET

’,:?!

÷ The display can be scrolled so that any character (in a single group) can

be selected.

+100

+10

To return

To advance

÷ Characters can also be selected directly from the remote control unit by

using the numeric keys.

(Example: Each press of the 2 key switches characters in order of

A = B = C.)

÷ The cursor can be moved to the left and right with the1 and ¡ keys.

Set the selected character.

Press the JOG DIAL.

18 15

OVER (−dB)

JOG DIAL

ANALOG DIGITAL

∞

TITLE

PGM

32kHz

SET

MONITOR

44.1kHz

48kHz

K E N

DOWN

PUSH SET

All characters of a title can be changed or erased by repeating

steps 1 to 5.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

DMF-9020/MD-2070 (En)

4^{Execute title change or deletion.}

Main unit

Remote control unit

Enter the title in memory.

18 15

OVER (−dB)

ANALOG DIGITAL

∞

ENTER

/TIME DISPLAY

TITLE

PGM

32kHz

MONITOR

44.1kHz

48kHz

ENTER

O R E !

D I S

Complete the operation.

TITLE

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

INPUT

TITLE

PGM

32kHz

INPUT

MONITOR

44.1kHz

48kHz

K E N

The title is scrolled automatically.

5^{Eject the Mini Disc.}

Main unit

WRITING

EJECT

N O D I S C

Remote control unit

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

Title editing function keys

REC MODE / CHARAC. key:

Press to switch the character groups on the character display.

Manual search (1, ¡) keys:

Press to move the cursor during title input operation.

When the cursor is

(lower half only) : The input character is inserted before the character in the cursor position.

When the cursor is

: The input character replaces the character in the cursor position.

FADE / DELETE key:

Press to clear (delete) the character on the cursor position and move the characters after it by one character backward. Pressing the key successively

(or holding it depressed) allows to clear a title easily.

EDIT / SPACE key:

Press to enter (insert) a space (one blank character) immediately before the character in the cursor position and move the characters after it by one

character forward. Multiple spaces can also be entered by pressing the key successively (or holding it depressed). The spaces are mainly used to leave

spaces for later addition of characters before adding characters to a title.

Scrolling the display

There may be cases in which the amount of information is too large

to be displayed at a time during the title input operation, etc. In such

Example of scrolling

a case, pressing the 1 or ¡ key repeatedly allows to move the

displayed characters to the left (or right) so that other information

which has been hidden can be displayed. This leftward or rightward

Displayed area (All cannot be displayed.)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Scrolling \

movement of the display characters is referred to as “scrolling.”

Remote control unit

Main unit

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

| Scrolling

™™/CUR.L

CUR.R/££

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Download from Www.Somanuals.com. All Manuals Search And Download.

CD text display and copy

DMF-9020/MD-2070 (En)

By connecting this unit with a KENWOOD CD Text-compatible CD player (which carries “CD TEXT” marking on the rear panel)

through a synchro cord and a digital cord or optical fiber cable, the text (disc titles and track titles) of CD tracks can be copied

onto a MD disc. It is not possible to copy the text alone. However, note that the copying of CD text may not be possible with

certaindiscs.

Preparation

Set the amplifier’s input selector to CD.

Switch off the program mode of the CD player.

Put the CD player and MD recorder to stop mode.

Set the MD recorder to the DIGITAL mode for accepting the input signal from the CD player.

Loading (displaying) the CD text

Each press switches the mode.

1 TITLE not lit : TITLE INPUT mode is off

2 TITLE blinking : TITLE INPUT mode is on

Switch the TITLE INPUT mode on.

TITLE

INPUT

The modes are switched by rotating the JOG DIAL.

1 DISC

2 001

: Disc title

: Track title

3 PRE1-PRE9 : Preset title

4 ALLERASE? : Erasing both disc and track titles

5 CDtext LOAD?: Preparing for CD text copy

Select “CDtext LOAD”.

JOG DIAL

18 15

OVER (−dB)

ANALOG DIGITAL

∞

TITLE

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

O A D

C D

DOWN

U P

PUSH SET

18 15 12

OVER (−dB)

ANALOG DIGITAL

18 15 12

OVER (−dB)

∞

ANALOG DIGITAL

∞

TITLE

PGM

TITLE

PGM

SINGLE

32kHz

COPY

MONITOR

44.1kHz

48kHz

44.1kHz

48kHz

0 0

0 :

0 0

C O

T E

“COPY” blinks

“COPY” lights up

Set the selection (by pressing the JOG DIAL).

JOG DIAL

÷When the text copy function has been set, the text (track titles) is

transmitted from the CD to the MD.

÷When the CD player is not designed to display the CD text, the CD text

corresponding to each track is displayed as the CD tracks are played

after loading.

DOWN

PUSH SET

To delete the CD text data copied on MD:

While “COPY” is lit, press the REC INPUT key to switch the

mode.

Display after execution

“COMPLETE!”

“CAN’T LOAD”

: Copy is completed.

: Copy is incomplete.

“CAN’T ACCESS” : A CD text-compatible CD player is not connected

to this unit.

“CDtext EMPTY” : The CD in use is not a CD text disc or no CD is

loaded in the player.

“Now Analog In” : CD text cannot be loaded because the current

input mode is the analog mode.

“UNLOCK”

: CD text cannot be loaded because the digital cord

or optical fiber cable is disconnected or connected

improperly.

Copying the CD text

÷To abort recording in the middle, press the 7 key of the CD player.

Load CD text.

÷To abort the CD text copy in the middle, eject the copy source CD.

Record the digital signal of the CD onto a MD.

Display after execution

“NO TEXT COPY” : Copy failed. (When the CD inhibits the copy operation)

Ejecting MD after loading or copying

WRITING

EJECT

N O D I S C

Information is

being written.

Mini Disc has been ejected.

While “WRITING” is displayed, do not apply shock

or vibration to the unit because information is

being written on the Mini Disc.

NNoottee

÷The copied CD text data is deleted automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the displayed contents

DMF-9020/MD-2070 (En)

TIME DISPLAY key

This key allows to switch the mode of time display.

Each press switches the time display modes.

In play/stop mode

Main unit

Remote control unit

1 SINGLE(+) : Elapsed time of the track being played

2 SINGLE(–) : Remaining time on the track being played

ENTER

/TIME DISPLAY

TIME

DISPLAY

3 TOTAL(+)

: Total elapsed play time of tracks

4 TOTAL(–)

: Total remaining play time of tracks (The total num-

ber of tracks is also displayed during stop mode.)

: Remaining recording time of disc

5 REMAIN

6 TITLE

: Track title display (during playback) or Mini Disc

title display (during stop)

In recording mode

1 SINGLE(+) : Elapsed play time of track being recorded

2 TOTAL(+)

3 REMAIN

: Total elapsed play time of tracks

: Remaining recording time of disc

When no track has been recorded

1 SINGLE(+) : “BLANK DISC” is displayed. (“NO TRACKS” is

displayed if the disc has a title.)

2 REMAIN

3 TITLE

: Remaining recording time of disc

: The Mini Disc title is displayed

METER key

The level meter display contents can be switched over in cycle.

1. Normal display

: The scale around 0 dB is set finely in this

mode, which is suitable for normal recording

(rock) or playback (pop music).

: The scale is set almost evenly from 0 dB to 30

dB in this mode, which is suitable for playing

music with wide level variation from pianis-

simo to fortissimo, such as classical music.

Each press switches the level meter display modes.

1 Example of normal display:

18 15

OVER (−dB)

ANALOG DIGITAL

∞

2. Wide display

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

2 Example of wide display:

Remote control unit

18 15

OVER (−dB)

ANALOG DIGITAL

∞

24 21

(−dB)

OVER

PGM

SINGLE

32kHz

METER

MONITOR

44.1kHz

48kHz

FADE key

Level meter display during fade-in/fade-out

By switching the fade mode on, each track can be recorded with

gradual sound increase at the beginning and gradual sound de-

crease at the ending.

Upper row of level meter : The level information during fade-in

and fade-out is displayed graphically.

Lower row of level meter: The meter segments light according to

the current R + L CH level.

The fade mode can be switched on when the unit is ON, the REC

INPUT is DIGITAL, in stop mode or in record mode. Press the FADE/

DELETE key again to switch the fade mode off.

The fade mode is not activated when the D.REC LEVEL is no more

than -38 dB.

Example (During FADE IN):

The indicated level increases (toward the right) as fade-in advances.

FADE

18 15

24 21

OVER (−dB)

(−dB)

ANALOG DIGITAL

∞

Mainunit

FADE/

DELETE

OVER

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

4 : 1 2

0 0 8

Example (During FADE OUT):

The indicated level decreases (toward the left) as fade-out advances.

“FADE” light up

FADE

18 15

OVER (−dB)

ANALOG DIGITAL

∞

FADE

18 15

OVER (−dB)

ANALOG DIGITAL

∞

OUT

PGM

(−dB)

OVER

32kHz

PGM

SINGLE

32kHz

MONITOR

44.1kHz

48kHz

MONITOR

44.1kHz

48kHz

2 : 0 2

0 1 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer operations

Playback or recording can also be activated at the desired

time by using a commercially available timer.

DMF-9020/MD-2070 (En)

Amplifier

PHONES

Connect the power cords of the associated components so

that their power can be turned ON through the audio timer.

Also, be sure to read carefully the instruction manual of the

timer.

Audio cord

Tuner

Donotsettimerrecordinginawaythatthepowerisnotturned

ON for more than 3 days; otherwise, the last recorded data

may be cleared.

Audio timer

Refer to “Memory backup”. 9

DMF-9020/MD-2070

Timer playback, timer recording

1^{Turn the powers of the associated components ON.}

÷Set the POWER key of the unit to ON.

2^{Make preparations.}

For timer playback

For timer recording

Load a prerecorded Mini

Disc.

Load a recordable Mini

Disc.

Receive the desired radio

station.

Select the desired mode

with the REC INPUT key.

÷For timer recording, be sure to set the write protect tab to enable

recording.

÷For timer recording, be sure to check the remaining recording time.

Adjusttherecordinglevel.

3^{Set the amplifier volume.}

For timer playback

For timer recording

Minimize the amplifier vol-

ume.

Play the Mini Disc.

Adjust the amplifier vol-

ume.

Stop the disc.

4^{Set the TIMER.}

For timer playback

TIMER

For timer recording

TIMER

REC

PLAY

REC

PLAY

OFF

÷When the set time comes, the disc playback or recording starts

automatically. (Also be sure to read the instruction manual of the

connected component carefully.)

5^{Set the timer ON time.}

For timer playback

For timer recording

Set the timer so that it sup- Set the timer so that the

plies power at the specified tuner reception can be

time.

started at the desired time

of the day.

÷After having set the timer, be careful not to press the ON/STANDBY

key of the remote control unit to ON; otherwise the timer operation

would be activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DMF-9020/MD-2070 (En)

What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table

below to see if the problem can be corrected before seeking help from your dealer or service representative.

Operation to reset

The microprocessor may fall into malfunction (impossibility to operate

With the POWER key left to ON, unplug the power cord

from the power outlet then, while holding the eject (0)

key depressed, plug the power cord again.

erroneous display, etc.) when the power cord is unplugged while power

is ON or due to an external factor. In this case, execute the following

procedure to reset the microprocessor and return it to normal condition.

÷Please note that resetting the microprocessor clears the contents

stored in, it returns the microprocessor to the condition when it left

the factory.

Symptoms related to MD standard

Symptom

Cause

“DISC FULL” is displayed while the disc still has a remaining record- ÷More than 255 tracks (track No. 256 or more) cannot be recorded. (There

able time.

may be also cases in which recording is impossible while the track

number is less than 256.)

In such a case, the REMAIN time display shows “0:00”.

The recordable time does not increase after a short track has been ÷The remaining time display becomes “0:00” when the actual total

erased.

remaining time of the Mini Disc is less than 12 seconds. The recordable

time display changes when the total time of the erased track exceeds

12 seconds.

÷When a Mini Disc has been subjected to repeated editing, the remaining

time may not increase even after a short track has been erased.

Tracks cannot be combined.

÷A track created as a result of an editing operation may sometimes be

impossible to be combined with another track.

The total of the recorded time and recordable time does not coincide ÷As recording is performed on a minimum recording basis of 2 seconds,

with the total recording time of the MD (60 or 74 min.). the displayed time may not coincide with the consumed disc capacity.

Sound is interrupted when a track created by editing is subjected to ÷Sound interruption may occur due to a combination of various factors,

fast forward or fast backward operation.

and it is not a malfunction.

Tracks are not numbered correctly.

÷A short track may be created depending on the contents of the recorded

source (CD, for example).

The period in which “READING” is displayed is abnormally long.

÷“READING” is displayed for a longer period than usual when a brand-

new recordable Mini Disc (a virgin disc) is loaded.

÷The Mini Disc in use has been processed with repeated editing or

contains a large number of tracks.

The total number of characters used in the titles is less than 1792 ÷As the title recording areas are used on a per-7-character basis, the total

characters. number of input characters may be less than 1792.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DMF-9020/MD-2070 (En)

Displayed messages and actions to be taken against them

Displayed Message

Meaning

Action

NO DISC

UNLOCK

÷ This unit is not loaded with disc.

÷Load a disc.

÷ The digital cord or optical fiber cable is not ÷The digital cord or optical fiber cable is not

lockedinpositionorconnectedincompletely(or

not connected).

lockedinpositionorconnectedincompletely(or

not connected).

SCMS ON

NotAudio

÷ An attempt is made to record digital signal from ÷Use analog recording.

a source while its digital copy has been prohib-

ited by SCMS.

÷ The digital signal being input is not an audio ÷Use analog recording.

signal.

DISCFULL

÷ There is no recordable area on the disc.

÷ An attempt is made to record a 256th track.

÷Use another recordable disc.

÷More than 255 tracks cannot be recorded per

disc.

TITLEFULL

BLANKDISC

NO TRACKS

÷ An attempt is made to assign a title with more ÷Refer to ”Total number of title characters”.

characters than usable.

÷ The disc does not contain any recordings.

÷When playback is required, use a recorded disc.

÷ The disc does not contain any tracks but has a ÷The disc can be used for recording without any

disc title.

problem.

÷ The TOC data of the disc is being read.

READING

WRITING

÷This is a normal operation.

÷ The data related to editing or recording is being ÷This is a normal operation.

written in the disc.

DISCERROR

÷ The contents of UTOC are abnormal.

÷Erase all tracks by executing ” +ALL”. If this is

not possible, use another Mini Disc. w

EDIT NOW!

CAN’T EDIT

÷ The editing operation is in progress.

÷This is a normal operation.

÷ An attempt is made to perform editing beyond

the restrictions, for example to erase a track

which is too short.

÷Perform editing following the restrictions.

ok? (blinking)

PROTECTED

÷ This is a message for confirming if editing can

÷Press the ENTER key to execute editing.

really be executed.

÷ The Mini Disc is in the “WRITE PROTECT”

condition.

÷Release the “WRITE PROTECT” condition.

PLAY ONLY

÷ A playback-only Mini Disc is loaded.

÷Load a recordable Mini Disc.

CAN’T ACCESS

÷ A CD text-compatible CD player is not con-

nected to this unit.

÷Connect the unit with a KENWOOD CD text-

compatible CD player using the synchro cord

and optical cable.

CAN’T LOAD

÷ The disc loaded in the CD player is not CD text-

compatible.

÷LoadaCDtext-compatiblediscintheCDplayer.

÷ The CD player is not connected to this unit ÷Connect the CD player through an optical cable

through an optical cable.

and set the REC INPUT of the MD recorder

accordingly.

÷ The CD player is in play mode or in the program ÷Switch the program mode of the CD player off

mode.

and put both the CD player and MD recorder in

stop mode.

CDtext EMPTY

Now Analog In

NO TEXT COPY

÷ The CD in use is not a CD text disc.

÷Use a CD containing CD text.

÷ No CD is loaded in the player.

÷Use a CD containing CD text.

÷Set the REC INPUT to the digital input to which

the CD player is connected.

÷ The current input mode is the analog mode.

•

÷The CD text of the current disc cannot be

copied. (Use a copy-capable CD disc.)

÷ The CD text of certain discs cannot be copied.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DMF-9020/MD-2070 (En)

Other symptoms

Symptom

Cause

Remedy

Sound is not output even when the play ÷ The cords are connected erroneously.

key is pressed.

÷Connect the cords in accordance with “System

connections”.

÷ No disc has been loaded.

÷ A non-recorded disc has been loaded.

÷Load a disc.

÷Load a prerecorded disc or playback-only disc.

Recording is not possible

÷ The disc is write-protected.

÷Change the position of the write protect tab to

the write position or use a recordable disc.

÷ An attempt is made to record digital signal from ÷Use analog recording.

a source while its digital copy has been prohib-

ited by SCMS.

÷ The recording level is too low (in case of analog ÷Adjust the recording level again.

recording).

÷ A playback-only disc has been loaded.

÷Use a recordable disc.

÷ The disc does not have a recordable area.

÷Use another disc.

÷ TheRECINPUTkeyisnotsettotheactualinput ÷Set it according to the actual input source.

source.

§•

÷ If the amplifier is connected to this unit through ÷Set the amplifier’s input selector to other posi-

a system control cord, the amplifier’s input

selector is set to the MD input.

tion than MD.

Sound is distorted.

Noise is noticeable.

÷ The recording level has not been adjusted.

÷Adjust the recording level.

÷ A disc in which distorted sound has been re- ÷Use another disc.

corded is played.

÷ An external noise is induced.

÷Install the unit at a position apart from an elec-

tric appliance or TV set.

Power cannot be turned on from the re- ÷ The POWER key is set to OFF.

mote control.

÷Set the POWER key to on (STANDBY).

Keyboard operation is not available.

÷ The keyboard is connected improperly.

÷Connect the keyboard properly.

TOC^*1: All minidiscs contain a Table of Contents (TOC) in addition to sound signals. The TOC is similar to the table of contents in a book and

contains information, such as track numbers, track length, and character information, that cannot be rewritten.

UTOC^*2: In addition to the TOC, minidiscs also contain a special User’s Table of Contents (UTOC) that contains track number, track length, and

character information, that can be rewritten.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

DMF-9020/MD-2070 (En)

[Format]

System ....................................................................................... Minidisc digital audio system

Laser ........................................................................................... Semiconductor laser

Recording method .................................................................... Field modulation overwrite method

Audio compression................................................................... ATRAC (Adaptive TRansform Acoustic Coding)

Playing rotation ........................................................................ Approx. 400 rpm ~ 900 rpm (CLV)

[D/A conversion]

D/A conversion ......................................................................... 1 Bit (24 bit type)

Oversampling ............................................................................ 8 fs (352.8 kHz)

[A/D converter]

A/D converter............................................................................ 4thordersigma-deltaconversion+D.R.I.V.E. conversion

Sampling frequency ................................................................. 44.1 kHz

[Digital audio performance]

Frequency responce (playback mode).................................... 8 Hz ~ 20 kHz ( 1 dB)

Signal to noise ratio (playback mode) ................................... More than 112 dB

Dynamic range (playback mode) ............................................ More than 96 dB

Total harmonic distortion (1 kHz, playback mode)............... Less than 0.004 %

Wow & flutter............................................................................ Less than unmeasurable limit

Analog input sensitivity / input impedance .......................... 500 mV / 22 kΩ

Analog output level / output impedance............................... 2.0 V / Less than 300 Ω

Headphone output.................................................................... 50 mW/32 Ω load (Phones level MAX)

Digital input

Coxaial .................................................................................... 0.5 Vp-p / 75 Ω

Optical(Wave length 660 nm) .............................................. - 15 dBm ~ - 21 dBm

Digital output

Coxaial .................................................................................... 0.5 Vp-p / 75 Ω

Optical(Wave length 660 nm) .............................................. - 15 dBm ~ - 21 dBm

[General]

Power consumption ................................................................. 20 W

Dimensions ................................................................................ W : 440 mm (17 - 5 / 16”)

H : 125 mm ( 4 - 15 / 16”)

D : 373 mm (14 - 11 / 16”)

Weight (Net) .............................................................................. 5.4 kg (11.9 lb)

1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

DMF-9020/MD-2070 (En)

For the U.S.A.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless

the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized

change or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful

interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

bedeterminedbyturningtheequipmentoffandon, theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

– – Reorient or relocate the receiving antenna.

– – Increase the separation between the equipment and receiver.

– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– – Consult the dealer or an experienced radio/TV technician for help.

For the U.S.A.

CAUTION :

Use of controls or adjustment or performance of procedures

other than those specified herein may result in hazardous radia-

tion exposure.

In compliance with Federal Regulations, following are reproduc-

tions of labels on, or inside the product relating to laser product

safety.

KENWOODCORPORATION

2967-3,ISHIKAWA-CHO,HACHIOJI-SHI,

TOKYO,JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS NO. 21

CFR 1040.10, CHAPTER 1, SUBCHAPTER J.

Location: Back Panel

Download from Www.Somanuals.com. All Manuals Search And Download.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below. Refer

to the model and serial numbers whenever you call upon your dealer for

information or service on this product.

Model

Serial Number

Download from Www.Somanuals.com. All Manuals Search And Download.

Ingersoll Rand Septic System 67200 XXX 3id User Manual
Intel Computer Hardware ICH10R User Manual
Invacare Wheelchair 9000 STANDARD WEIGHT User Manual
JBL Speaker System EON 510 User Manual
JVC Automobile Alarm SP X60 User Manual
JVC DVD Player XV D2000BK User Manual
KitchenAid Cooktop KHIF 9010 User Manual
KitchenAid Ice Maker KUIS15PRHB5 User Manual
Kompernass Gas Grill KH 1603 User Manual
Konica Minolta Printer Di1610 User Manual