AUDIO VIDEO SURROUND RECEIVER
VR-507
P
KRF-V7050D
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country and
sales area.
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several operation
modes. These modes enable the remote control to control other audio/video components. In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation modes
may result in incorrect operations.
O
R
B60-5027-00 01 MA (K, P, Y, M, X, I)
0009
A
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Contents
Caution : Read the pages marked
carefully to ensure safe operation.
3
Before applying the power ................... 2
In case of difficulty ........................... 45
Specifications ................................. 47
Additional
Information
Safety precautions .............................................. 2
Unpacking .......................................................... 2
How to use this manual ...................................... 4
Special features .................................................. 5
Names and functions of parts ................ 6
Remote control unit (RC-R0720) (VR-507).......... 7
Remote control unit (RC-R0613) (KRF-V7050D) .. 8
Setting up the system ......................... 9
Connecting audio components......................... 10
Connecting video components ......................... 11
Connecting a DVD player (6-channel input) ...... 12
Digital connections ........................................... 13
Connecting to the AV AUX jacks ...................... 14
Connecting the antennas .................................. 14
Connecting the system control ......................... 15
Connecting the speakers .................................. 16
Connecting the terminals .................................. 17
Preparing the remote control ............................ 18
Preparing for surround sound ............... 19
Speaker settings ............................................... 19
P
Preparations
Normal playback .............................. 20
Preparing for playback ...................................... 20
Listening to a source component ..................... 21
Adjusting the sound .......................................... 21
Recording ...................................... 22
Recording audio (analog sources) .................... 22
Recording video................................................ 23
Recording audio (digital sources) ...................... 23
Listening to radio broadcasts ............... 23
Tuning radio stations ........................................ 23
Presetting radio stations manually .................... 24
Receiving preset stations .................................. 24
Receiving preset stations in order (P.CALL)...... 24
Ambience effects.............................. 25
Surround modes ............................................... 25
Surround play ................................................... 27
DVD 6-channel playback .................................. 28
Convenient functions ........................................ 28
O
For the U.S.A.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
Operations
NOTE:
This equipment has been tested and found to comply with the limits for
aClassBdigitaldevice, pursuanttoPart15oftheFCCRules. Theselimits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment may cause harmful
interference to radio communications, if it is not installed and used in
accordance with the instructions. However, there is no guarantee that
interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
totrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
– – Reorient or relocate the receiving antenna.
Basic remote control operations for other
components .................................... 31
Registering setup codes for other
R
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
components (RC-R0720) .................................. 31
Programming TV/VCR combo control .............. 31
Searching for your code ................................... 32
Checking the codes .......................................... 32
Re-assigning device keys ................................. 32
Changing volume lock ...................................... 33
Operating other components ............................ 33
Registering setup codes for other
components (RC-R0613) .................................. 34
Operating other components (RC-R0613) ........ 34
Setup code chart (for VR-507 (RC-R0720)) ...... 35
Setup code chart (for KRF-V7050D
– – Consult the dealer or an experienced radio / TV technician for help.
For the U.S.A.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry
as practical.
Remote Control
®
As an ENERGY STAR Partner, Kenwood Corpora-
(RC-R0613))...................................................... 39
CASSETTE deck, CD player & MD recorder
operations......................................................... 40
Other components’ operations ......................... 42
tion has determined that this product meets the
®
ENERGY STAR guidelines for energy efficiency.
This product can save energy. Saving energy reduces air pollution and
lowers utility bills.
A
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
How to use this manual
4
ThismanualcoverstheVR-507andKRF-V7050D.Itemssuchasfunctions,
number of jacks, and remote control details somewhat differ between
these models. To confirm the functions available on the model you have
purchased, refer to the table below.
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 2 days.
Terminal
Video 3
jacks
Remote
Control
Model name
VR-507
• Power mode.
• Input selector settings.
• Device preset.
• Picture output.
• Speaker ON/OFF
• Volume level.
• BASS,TREBLE,INPUTlevel.
• Subwoofer ON/OFF.
• Dimmer level.
• 6ch/2ch input setting.
• Listen mode setting.
• Speaker settings.
• Input mode setting.
• Midnight mode setting.
• Broadcast band.
• Frequency setting.
• Preset stations.
Speaker out
Front input
Equipped
Equipped
Preparations
RC-R0720
2 systems
(A, B)
Equipped
KRF-V7050D RC-R0613
2 systems
(A, B)
Equipped
• Tuning mode.
This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information.
• Monitor ON/OFF.
• CINEMA EQ.
• MD/TAPE settings.
• Source Direct.
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor.
We will guide you to make setting up your system as easy as possible.
However, since this receiver works with all of your audio and video
components, connecting the system can be fairly complex.
Operations
Shows you how to operate the various functions available on the receiver.
Remote Control
Shows you how to operate other components using the remote control,
as well as a detailed explanation of all remote control operations. Once
you have registered your components with the proper setup codes, you’ll
be able to operate both this receiver and your other AV components (TV,
VCR, DVD player, CD player, etc.) using the remote control supplied with
this receiver.
Additional Information
Shows you additional information such as “In case of difficulty”
(troubleshooting) and “Specifications”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Special features
5
True home theater sound
Multi channel music (SRS Circle Surround
)
SRSCirclesurroundenablesyoutolistentomultichannelsoundfromthe
stereo source. We assume you have already enjoyed listening to Dolby
digital sound/DTS multi channel sound with your multi speakers. Now,
this time try listening to the stereo source (ex. Audio CD) using your multi
speakers. You may discover a new type of “stereo” sound through SRS
Circle Surround.
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and
enjoy!
∞
Dolby Digital
The DOLBY DIGITAL mode lets you enjoy full digital surround from
software processed in the Dolby Digital format. Dolby Digital provides
up to 5.1 channels of independent digital audio for better sound quality
and more powerful presence than conventional Dolby Surround.
DSP surround modes
The DSP (Digital Signal Processor) used for this receiver incorporates a
variety of high quality adjustable sound fields, like “ARENA”, “JAZZ
CLUB”, THEATER”, STADIUM” and “DISCO”. It is compatible with
almost any kind of program source.
Dolby PRO LOGIC II
P
Pro Logic II, whilst totally compatible with its predecessor PRO LOGIC,
provides greater advantages in surround sound. It allows user to enjoy
the conventional stereo or Dolby Surround with a convincing “5.1 like”
presentation. PRO LOGIC II offers special features for controlling the
overall spatial, dimensionality and frontal sound field imaging. Dolby
PRO LOGIC II produces an impressive surround sound from video
DVD 6-channel input
If you own a DVD player equipped with 6-channel output, this receiver
allows you to obtain the full surround sound impact of DVD source
material featuring multi-channel encoding. Since the source signals are
digital and each channel is input independently, the resulting ambience
is far superior to what can be achieved with conventional surround sound
systems.
software marked
and three-dimensional space from
music CD. When listening to music, you will be able to enjoy the
experience of sheer STEREO surround sound.
CINEMA EQ.
Cinema EQ. mode will produce a more dynamic sound quality in any
conditions. You can enjoy a more impressive sound effect when you
switch CINEMA EQ. ON during Dolby Digital and DTS playback.
Dolby 3 Stereo
This surround system reproduces theater-like surround sound from
video software marked
.
The 3 STEREO mode will redirect the Surround signal to the front left
and right speakers when only the front and center speakers are used.
Universal IR (InfraRed) remote control
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio and
video components. Just follow the simple setup procedure to register the
components you have connected.
DTS
DTS (Digital Theater System) is a 5.1 channel digital audio format that
providesfivefull-spectrumchannelsandonelow-frequency(subwoofer)
channel for unprecedented clarity, optimum channel separation and a
(wide) dynamic range.
In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or
DVDdisc(carryingthe“DTS”marking)canbeplayedinDigitalSurround.
Important:
When a DTS disc is played on a CD, LD or DVD player, noise may be
output from the analog output. It is recommended that you connect the
digital output of the player to the digital input of this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Frequency display,
PRO LOGIC
indicator
Input display,
Preset channel display,
Surround mode display
DIGITAL indicator
S.DIRECT indicator
AUTO indicator
AUTO SOUND indicator
Band indicators
6
Speaker indicator
AUTO
MEMO indicator
FM AUTO SOUND DIGITAL
SP
CLIP
A
B
MUTE
L
LFE
C
S
R
SW
SR
AM PRO LOGIC S.DIRECT MEMO
MHz 3 STEREO MONITOR ST.
CLIP indicator
MUTE indicator
ST. indicator
TUNED
kHz DOWNMIX
DSP
SL
TUNED indicator
DOWNMIX indicator
MONITOR indicator
DSP indicator
Speaker selection indicators
Input channel indicators
Output channel indicators
Preparations
3 STEREO indicator
STEREO indicator
Display
VOLUME CONTROL
DOLBY
DIGITAL
STANDBY
STANDBY
DTS
PRO LOGIC
3
STEREO
CS 5.1
INPUT SELECTOR
MULTI CONTROL
POWER
SET UP
INPUT MODE
DIMMER
MONITOR
SOUND
BAND
LISTEN MODE
SOURCE DIRECT
MEMORY
ON/STANDBY
POWER
ON/STANDBY
ON
OFF
A
SPEAKERS
B
AUTO/CINEMA EQ.
DOWN
UP
S-VIDEO
V
AV AUX
L
–
AUDIO
–
R
PHONES
For VR-507
1 POWER key (For KRF-V7050D)
Use to turn the main power ON/OFF.
(
(
3 STEREO indicator
Lights when the receiver is in the 3 STEREO
mode.
¶
# BAND key
Use to select the broadcast band.
$ AUTO/CINEMA EQ. key
£
2 ON/STANDBY (
) key
(For KRF-V7050D)
Use to switch the power ON/STANDBY when
the POWER is turned ON.
CS 5.1 indicator
Lights when the receiver is in the CS 5.1 mode.
6 INPUT MODE key
Use to switch between the digital and analog
inputs.
¶
Use to change “TAPE” indication to “MD”.
)
9
Use to select the auto tuning mode.
Use to switch the status of CINEMA EQ.
% LISTEN MODE key
£
™
¶
STANDBY indicator
2 POWER (
) key (For VR-507)
(
Use to turn the power ON/STANDBY.
STANDBY indicator
3 MULTI CONTROL knob
Use to control a variety of settings.
4 SET UP key
7 DIMMER key
Use to adjust the brightness of the display.
Use to select the REC MODE.
8 MONITOR key
Use to monitor the source that is connected to
the MONITOR jack.
£º
Use to select the listening mode.
^ MEMORY key
Usetostoreradiostationsinthepresetmemory.
& SOURCE DIRECT key
Use to pass the source material directly to the
amplifier.
™
(
(
™
¢
Use to select the speakers' settings etc.
5 Surround indicators
DTS indicator
9 VOLUME CONTROL knob
0 PHONES jack
¡
™
* INPUT SELECTOR knob
Use to select the input sources.
¡
¶
Lights when the receiver is in the DTS mode.
Use for headphone listening.
! SPEAKERS A/B keys
Use to turn the A/B speakers ON/OFF.
@ SOUND key
( AV AUX (S VIDEO, V, AUDIO L/R) jacks
DOLBY DIGITAL indicator
¶
)
•
$
Lights when the receiver is in the Dolby Digital
mode.
PRO LOGIC indicator
Lights when the receiver is in the PRO LOGIC
¶
Use to adjust the sound quality and the ambi-
ence effects.
mode.
Standby mode
When standby indicator is lit, this receiver is in standby mode and consumes a small amount of curent for back-up. This system can be switched on using
remote controls.
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit (RC-R0720) (VR-507)
7
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by
setting the appropriate maker setup codes.
⁄
POWER
SET UP
DVD
CBL
CD
VCR
TV
RECEIVER
DSS
1
4
7
2
5
8
0
3
6
9
P
MUTE
+10
ENTER
¢
LSTN.M
+
+
LAST
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
4
GUIDE
SETUP
P.CALL
EXIT/RETURN
MULTI CONTROL
P.CALL
¢
4
SELECT
REC M.
DIM.
MULTI CONTROL
BAND
INFO/OSD
MENU
1
REC
¶
6
¡
AUTO
A/B +100
If the name of a function is different on
the receiver and on the remote control,
the name of the remote control key in
thismanualisindicatedinparentheses.
7
8
PHONO TUNER MD/TAPE CD/DVD
VIDEO1 VIDEO2
VIDEO3
DVD
DISC SEL. DISC SKIP BASS BOOST AV AUX
1 SET UP key
⁄
0 BAND key
£
SLEEP key
Use to register other components.
2 Source key (DVD, CBL, VCR, TV, DSS,
CD, RECEIVER)
Use to select the broadcast band.
Use to operate other components.
) CHANNEL +/– keys
Use to select the channel.
4 DVD ¢ keys
6 key
If CD is selected as the input source, this key
functions as the play/pause key.
Usetoselectthecomponentsregisteredatthe
respective input. Press POWER (
switch the component ON/OFF.
3 Numeric keys
) key to
If MD or TAPE is selected as the input
source, this key functions as the play key.
When in DVD player operations, these keys
function as skip keys.
¡ CINE.EQ key
Use to switch the status of CINEMA EQ.
INPUT key
Use to operate other components.
™ EXIT/RETURN key
Use to operate other components.
£ DIM. key
Use to adjust the brightness of the display.
MENU key
Use to operate other components.
¢ A/B key
⁄
! ¶ key
™
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
If VCR is selected, this key functions as
record key.
If TAPE is selected, this key functions as
reverse play key.
@ INPUT SELECTOR keys (PHONO,
TUNER, MD/TAPE, CD/DVD, VIDEO1,
VIDEO2, VIDEO3, DVD, AV AUX)
Use to select the input sources.
# DISC SEL. key
Use to operate other components.
$ DISC SKIP key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
% LED indicator
Blinks to show that a signal is sending.
^ POWER (
4 MUTE key
™
Use to temporarily mute the sound.
5 VOLUME +/– keys
Use to adjust the receiver volume.
6 GUIDE key
¡
¡
Use to operate other components.
SET UP key
Use to select the speakers’ settings etc.
7 MULTI CONTROL keys
Use to control a variety of settings.
Use to operate other components.
P.CALL 4/¢ keys
(
If TAPE is selected as the input source, this
is (A and B) of a double cassette deck.
+100 key
(
Use to select the disc number with the multi-
CD player.
¢
If tuner is selected as the input source, these
keys function as P.CALL keys.
SELECT key
8 key
) key
*⁄
Use to operate other components.
Use to switch the receiver and other
registered components ON/OFF.
& LSTN.M key
∞ AUTO key
£
Use to operate other components.
8 REC M. key
Use to select the auto tuning mode.
¶
7 key
Use to select the listening mode.
LAST key
Use to select the REC MODE.
INFO/OSD key
If CD, MD or TAPE is selected as the input
source, this key functions as the stop key.
Use to operate other components.
* ENTER key
Use to operate other components.
9 TUNING 1/¡ key
§ BASS BOOST key
¡
Use to select the maximum adjustment
Use to operate other components.
( SOUND key
Use to operate the tuner or selected
component.
If CD, MD or TAPE is selected as the input
source, this key functions as search key.
setting for the low frequency range.
•
Use to adjust the sound quality and the
ambience effects.
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit (RC-R0613) (KRF-V7050D)
8
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by
setting the appropriate maker setup codes.
⁄
POWER
Preparations
1
2
1
4
7
0
2
5
3
6
9
#
$
TV
VCR
8
DVD
RETURN
LSTN M.
+10
CABLE
MENU
OSD
DSS
SET UP
SOUND
3
4
POWER
P.CALL
P.CALL
5
MULTI CONTROL
%
^
&
*
(
)
TUNING
ENTER
CINE.EQ
BAND
DVD
6
7
A/B+100
DISC SKIP
AUTO
B.BOOST
RECEIVER
TITLE
PHONO
8
9
0
!
TV SEL.
CD/DVD
INPUT SEL.
TUNER
MD/TAPE
CHANNEL
AV AUX
If the name of a function is different on
the receiver and on the remote control,
the name of the remote control key in
thismanualisindicatedinparentheses.
DVD
DISC SEL.
VIDEO3
VIDEO1
VIDEO2
¡
™
@
MUTE
VOLUME
1 Numeric keys
⁄
7 B.BOOST key
¡
# POWER (
) key
(
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
Use to select the maximum adjustment
setting for the low frequency range.
RECEIVER key
Use to turn the receiver on and off.
$ Source POWER key (TV, VCR, DVD,
DSS, CABLE)
2 LSTN M. key
Use to select the listening mode.
RETURN key
Use to operate other components.
3 SET UP key
¶
Use to return to the operation of the
receiver.
8 DISC SKIP key
Use to turn the other components on and off.
% ENTER key
Use to operate other components.
If CD is selected as the input source, this
key functions as the multi-CD player disc
skip key.
CINE.EQ key
™
(
Use to switch the status of CINEMA EQ.
Use to select the speakers' settings etc.
MENU key
^ BAND key
£
A/B key
Use to select the broadcast band.
6 key
Use to operate other components.
If TAPE is selected as the input source,
this is (A and B) of a double cassette
deck.
4 SOUND key
•
If CD is selected as the input source, this
key functions as the play/pause key.
If MD or TAPE is selected as the input
source, this key functions as the play key.
Use to adjust the sound quality and
ambience effects.
+100 key
Use to select the disc number with the
multi-CD player.
9 TITLE key
Use to operate other components.
0 TV SEL. key
Use to operate other components.
! INPUT SELECTOR keys (DVD,
PHONO, CD/DVD, TUNER, MD/TAPE,
VIDEO1, VIDEO2, VIDEO3, AV AUX)
OSD key
Use to operate other components.
5 MULTI CONTROL keys
Use to control a variety of settings.
Use to operate other components.
P.CALL 4/¢ keys
& AUTO key
£
(
¢
Use to select the auto tuning mode.
7 key
If CD, MD or TAPE is selected as the input
source, this key functions as the stop key.
If tuner is selected as the input source,
these keys function as P.CALL keys.
4/¢ keys
If CD or MD is selected as the input
source, these keys function as skip keys.
6 TUNING 1/¡ keys
Use to operate the tuner or selected
component.
* 8 key
Use to operate other components.
( INPUT SEL. key
Use to operate other components.
) CHANNEL %¥fi key
¡
Use to select the input sources.
4 DVD ¢ keys
Use to select the channel.
¡ DISC SEL. key
When in DVD player operations, these
keys function as skip keys.
Use to operate other components.
™ VOLUME keys
If CD, MD or TAPE is selected as the input
source, these keys function as search
keys.
¡
@ MUTE key
™
Use to adjust the receiver volume.
Use to temporarily mute the sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Make connections as shown in the following pages.
When connecting the related system components, be sure
to also refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all
connections are completed.
Input mode settings
CD/DVD, VIDEO2, VIDEO3 and DVD/6ch inputs each include jacks
for digital audio input and analog audio input.
You must select beforehand which type of input is to be used for each
connected component.
9
The initial factory settings for audio signal playback (CD/DVD,
DVD/6ch) and (VIDEO2, VIDEO3) are digital and analog respec-
tively.
To use the analog audio input for playback instead (if, for example, you
have connected a VCR to the VIDEO2 or VIDEO3 input), you must set
the input mode for the corresponding input to the analog mode.
After completing connections and turning on the receiver, follow the
steps below.
DTS disclaimer clause
DTS Digital Surround™ is a discrete 5.1 channel digital audio format
available on CD, LD, and DVD software which consequently cannot be
decoded and played back inside most CD, LD, or DVD players. For this
reason, when DTS-encoded software is played back through the analog
outputs of the CD, LD, or DVD player, excessive noise will be exhibited.
To avoid possible damage to the audio system, proper precautions
should be taken by the consumer if the analog outputs are connected
directly to an amplification system. To enjoy DTS Digital Surround™
playback, an external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the digital output (S/P DIF, AES/EBU, or
TosLink) of the CD, LD or DVD player.
INPUT SELECTOR
P
Notes
1. Be sure to insert all connection cords securely. If their connections are
imperfect, the sound may not be produced or noise may interfere.
2. Be sure to remove the power cord from the AC outlet before plugging or
unplugginganyconnectioncords.Plugging/unpluggingconnectioncords
without disconnecting the power cord can cause malfunctions and may
damage the unit.
INPUT MODE
1 Use the INPUT SELECTOR knob to select CD/DVD, VIDEO2,
VIDEO3 or DVD/6ch.
3. Do not connect power cords from components whose power consump-
tion is larger than what is indicated on the AC outlet at the rear of this unit.
2 Press the INPUT MODE key.
Analog connections
Each press switches the setting as follows:
Audio connections are made using RCA pin cords. These cables transfer
stereo audio signal in an “analog” form. This means the audio signal
corresponds to the actual audio of two channels. These cables usually have
2 plugs each end, one red for the right channel and one white for the left
channel. These cables are usually packed together with the source unit, or
are available at your local electronics retailer.
In DTS play mode
1 D-AUTO (digital input, auto sound)
2 D-MANUAL (digital input, manual sound)
In DVD/6ch play mode
1 D-AUTO (digital input, auto sound)
2 D-MANUAL (digital input, manual sound)
3 6ch INPT (DVD/6ch input)
4 ANALOG (analog input, manual sound)
In modes other than DTS or DVD/6ch play mode
1 D-AUTO (digital input, auto sound)
2 D-MANUAL (digital input, manual sound)
3 ANALOG (analog input, manual sound)
Digital input:
Select this setting to play digital signals from a DVD, CD, or LD player.
Analog input:
Select this setting to play analog signals from a cassette deck, VCR,
or record player.
Auto sound:
In the auto sound mode (AUTO SOUND indicator lights), the receiver
selects the listening mode automatically during playback to match the
type of input signal (Dolby Digital, PCM, DTS ) and the speaker setting.
The initial factory setting is auto sound on.
To keep the receiver set to the currently selected listening mode, use
the INPUT MODE key to select “D-MANUAL” (manual sound).
However, even when this setting is selected, there may be cases in
which the listening mode is selected automatically to match a Dolby
Digital source signal depending on the combination of listening mode
and source signal.
If the INPUT MODE key is pressed quickly, sound may not be
produced.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting audio components
10
Shape of AC outlets
U.S.A. and Canada
Australia
Preparations
Other countries
SYSTEM CONTROL
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY IN
L
jacks
%
MONITOR
OUT
DVD
VIDEO
1
VIDEO
1
VIDEO
2
VIDEO
3
B
R
L
R
75µs
AM 10kHz
FM 100kHz
To AC wall outlet
R
L
50µs
A
R
L
C
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
L
R
REC OUT
PLAY IN
REC OUT
PLAY IN
GND
PHONO
CD/DVD
MD/TAPE
MONITOR
AUDIO
OUT
IN
Video component,
3 head cassette deck, or
Graphic equalizer
™
OUT
Cassette deck or
MD recorder
IN
OUT
CD or DVD player
Moving coil (MC) cartridge
record player cannot be used
directly from the receiver unit. It
can only be used when another
equalizeramplifierisconnected.
OUT
Record player
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components
11
About the S VIDEO
jacks
S Video jacks
S
VIDEO
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY IN
S VIDEO
MONITOR
OUT
DVD
VIDEO 1
VIDEO 1
VIDEO 2
VIDEO 3
Use the S VIDEO jacks to
make connections to
video components with S
VIDEO IN/OUT jacks.
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY IN
L
MONITOR
OUT
P
DVD
VIDEO
1
VIDEO
1
VIDEO
2
VIDEO
3
B
÷If you use the S VIDEO
jackstoconnectyourvideo
playback components, be
sure to use the S VIDEO
jacks when connecting
your monitor and video
recording components.
R
L
R
75µs
AM 10kHz
FM 100kHz
R
L
A
50µs
R
L
C
AM 9kHz
FM 50kHz
DE-
EMPH
CHAN
SPACE
VIDEO
VIDEO
2
IN
CD/DVD
IN
DVD
MONITOR
OUT
VIDEO
1
OUT
REC OUT
PLAY IN
PLAY IN
VIDEO 2
PLAY IN
VIDEO 3
VIDEO 1
VIDEO
1
IN
VIDEO
3
IN
Monitor TV
VIDEO
IN
IN
Video inputs
(Yellow RCA pin cords)
Video deck
IN
IN
Video
IN/OUT
Audio
IN/OUT
OUT
OUT
Audio inputs
and outputs
Video inputs and
outputs
(Yellow RCA pin cords)
OUT
OUT
OUT
DVD player or LD player
OUT
DVD player or LD player
A video component with digital audio outputs should be connected to the VIDEO2 or VIDEO3 jacks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting a DVD player (6-channel input)
If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings”
12
section carefully.
9
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY IN
L
MONITOR
OUT
DVD
VIDEO
1
VIDEO
1
VIDEO
2
VIDEO
3
B
R
L
R
P
R
L
50µs
A
R
L
C
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
VIDEO
VIDEO 2 IN
PLAY IN
L
CENTER
DVD
CD/DVD
DVD
IN
DVD
MONITOR
OUT
VIDEO 1
OUT
R
SUB
VIDEO
2
FRONT
SURROUND
WOOFER
COAXIAL
DVD/6CH. INPUT
VIDEO 1 IN
VIDEO 3 IN
S VIDEO cord
VIDEO OUT
(Yellow RCA
pin cord)
FRONT
OUT L/R
SURROUND
OUT L/R
CENTER OUT
DVD player
SUBWOOFER OUT
COAXIAL
DIGITAL
OUT
(AUDIO)
S VIDEO
OUT
To switch the speakers off, press the MUTE key.
CAUTION (Except for U.S.A. and Canada)
Be sure to adhere to the following. Or proper ventilation will be blocked causing damage or fire hazard.
• Do not place any object impairing heat radiation onto the top of the unit.
• Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
CAUTION (For U.S.A. and Canada)
Be sure to adhere to the following. Or proper ventilation will be blocked causing damage or fire hazard.
• Do not place any object impairing heat radiation onto the top of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
13
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section
carefully.
9
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY IN
L
MONITOR
OUT
DVD
VIDEO
1
VIDEO
1
VIDEO
2
VIDEO
3
B
R
L
R
P
75µs
AM 10kHz
FM 100kHz
R
L
50µs
A
R
L
C
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
OPTICAL DIGITAL OUT (AUDIO)
DVD
Optical fiber cable
CD or DVD player
CD/DVD
VIDEO
3
VIDEO
2
OPTICAL
OPTICAL
COAXIAL
DIGITAL IN
Optical fiber
cable
OPTICAL DIGITAL OUT
(AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See “Connecting video components”.)
!
COAXIAL DIGITAL OUT
(AUDIO)
COAXIAL
DIGITAL
OUT
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
(AUDIO)
RF digital
demodulator
(DEM-9991D)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video components”.)
!
(sold separately)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting to the AV AUX jacks
Connecting the antennas
14
AM loop antenna
The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
The supplied loop antenna is for use indoors. Place it as far as possible from
thereceiver, TVset, speakercordsandpowercord, andadjustthedirection
for best reception.
AM antenna terminal connections
1 Push lever.
2 Insert cord.
3 Release lever.
Preparations
FM indoor antenna
AV AUX
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
S
VIDEO
V
L
—
AUDIO
—
R
FM antenna terminal connections
Insert cord.
S VIDEO cord
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75Ω terminal.
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY IN
L
MONITOR
OUT
DVD
VIDEO
1
VIDEO
1
VIDEO
2
VIDEO
3
B
R
L
R
75µs
AM 10kHz
FM 100kHz
R
L
50µs
A
R
L
C
AM 9kHz
FM 50kHz
VIDEO OUT
Camcorder, other VCR,
video game, digital camera,
or portable MD player
DE-
EMPHASIS
CHANNEL
SPACE
Attach to the stand.
ANTENNA
AUDIO OUT
S VIDEO OUT
GND
FM
75Ω
AM
AM loop antenna
FM indoor antenna
FM outdoor antenna
Use an antenna
adaptor
(Commercially
available)
•
•
•
To select the source connected to the AV AUX jacks, select AV
AUX by using the INPUT SELECTOR knob.
WhenyouconnecttheaudiosourcesuchastheMDplayer, you
do not need to connect the video cable.
When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
¡
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the system control
15
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote supplied with the
receiver.
This unit is compatible only with the [SL-16] mode. The system
control operation is not available if the unit is connected in the
[XS8], [XS], or [XR] connection mode.
Automatic Operation
When you start playback from a source component, the input selector
on this unit switches to that component automatically.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
Synchronized Recording
Lets you synchronize recording with the start of playback when record-
ing from CD, MD or analog discs.
SYSTEM
CONTROL
P
SYSTEM CONTROL
cord
Registering setup codes for KENWOOD audio components
• You may connect the system control cord to either the left or right jack.
If you own remote controllable KENWOOD audio components that are
not compatible with system control, registering the setup code enables
you to control those components using the remote control supplied with
this unit (without connecting system control cords). To register setup
codes for your remote controllable KENWOOD audio components, see
“Registering setup codes for other components”.
EXAMPLE: [SL16] mode connections
The underlined portion represents the setting of the system control
mode.
[SL16]
Receiver
fi·
SYSTEM
CONTROL
cord
Cassette deck
or MD recorder
[SL16] [XS] [XS8] [XR]
[SL16] [XS] [XS8]
[XS]
CD player
Record player
• In order to take advantage of the system control operations, the
components must be connected to the correct jacks. To use a CD
player it must be connected to the CD jacks. To use a cassette deck
(or MD recorder) it must be connected to the MD/TAPE jacks. When
using more than one CD player (etc.) only the one connected to the
specified jacks may be connected for system control.
• Some CD players and cassette decks are not compatible with the
[SL16] system control mode. Do not make system connections with
equipment that is not [SL16] compatible.
• Some MD players are not system control compatible. You cannot
make system control connections to this kind of equipment.
Notes
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]
equipment for system operations. If your equipment consists of this
kind of combination, please do not connect any system control cords.
Even without system control cords, normal operations can be carried
out without effecting performance.
2. Do not connect system control cords to any components other than
those specified by KENWOOD. It may cause a malfunction and
damage your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speakers
16
Front Speakers A
Right
Left
Center
Preparations
Speaker
FRONT SPEAKERS
CENTER SPEAKER
GREEN
RED
BLUE
+
PLAY IN
REC OUT
P
PLAY IN
PLAY IN
L
MONITOR
OUT
DVD
VIDEO
1
VIDEO
1
V
2
VIDEO
3
B
R
L
R
75µs
AM 10kHz
FM 100kHz
R
L
50µs
A
R
L
C
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
SUB WOOFER
PRE OUT
FRONT SPEAKERS
+
+
ORANGE
GRAY
SURROUND SPEAKERS
Powered
subwoofer
Right
Surround Speakers
Left
(Be sure to connect both
surround speakers)
Use the FRONT SPEAKERS B
terminals if you want to connect
a second front speaker system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the terminals
17
Connection of banana plugs (For U.S.A. and Canada)
1 Strip coating.
2 Loosen.
1 Secure.
2 Insert.
3 Insert.
4 Secure.
• Sound will not be heard if the speaker terminal is not fully secured.
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ral with ambiguous acoustic imaging. Be sure to connect the speak-
ers correctly.
P
Speaker impedance
1 Strip coating.
2 Push the lever.
After confirming the speaker impedance indications printed on the rear
panel of the receiver, connect speakers with matching impedance
ratings. Using speakers with a rated impedance other than that indi-
cated on the rear panel of the receiver could result in malfunctions or
damage to the speakers or receiver.
3 Insert the cord.
4 Return the lever.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Preparing the remote control
18
For VR-507 (RC-R0720)
Loading the batteries
Speaker placement
2 Insert the batteries.
1 Remove the cover.
Center speaker
Subwoofer
Preparations
3 Close the cover.
Front
speaker
Listening
position
Surround
speaker
• Insert two AA-size (R6) batteries as indicated by the polarity markings.
For KRF-V7050D (RC-R0613)
Loading the batteries
Frontspeakers :Placetothefrontleftandrightofthelisteningposition.
Front speakers are required for all surround modes.
Center speaker : Place front and center. This speaker stabilizes the
sound image and helps recreate sound motion. Be sure to connect a
center speaker when using the Dolby 3 Stereo mode.
2 Insert the batteries.
1 Remove the cover.
Surround speakers : Place to the direct left and right, or slightly
behind, the listening position at even heights, approximately 1 meter
above the ears of the listeners. These speakers recreate sound motion
and atmosphere. Required for surround playback.
Subwoofer : Reproduces powerful deep bass sounds.
3 Close the cover.
1
2
• Although the ideal surround system consists of all the speakers listed
above, if you don't have a center speaker or a subwoofer, you can
divide those signals between the available speakers in the speaker
settings steps to obtain the best possible surround reproduction from
the speakers you have available.
(
• Insert two AA-size (R6) batteries as indicated by the polarity markings.
Channel space switching
Operation
(Except for the USA, Canada, UK, Europe, and Australia)
When the STANDBY indicator is lit, the power turns ON when you press
the POWER key on the remote control. When the power comes ON,
press the key you want to operate.
The space between radio channels has been set to the one that prevails
in the area to which the system is shipped. However, if the current
channel space setting does not match the setting in the area where the
system is to be used, for instance when you move from area 1 or area
2 shown in the following table or vice versa, proper reception of AM/FM
broadcasts cannot be expected. In this case, change the channel space
setting in accordance with your area by referring to the following table.
Operating range
Remote sensor
(Approx.)
6 m
CHANNEL
Area
Space Frequency
USA, Canada and South
American countries
FM: 100 kHz
AM: 10 kHz
1
2
FM: 50 kHz
AM: 9 kHz
Other countries
Infrared ray system
PLAY IN
REC OUT
PLAY IN
PLAY IN
PLAY
• When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
L
MONITOR
OUT
DVD
VIDEO
1
VIDEO
1
VIDEO
2
VIDEO
R
75µs
AM 10kHz
FM 100kHz
50µs
A
R
AM 9kHz
FM 50kHz
Notes
DE-
EMPHASIS
CHANNEL
DE-
SPACE
1. The supplied batteries may have shorter lives than ordinary batteries due
to use during operation checks.
EMPHASIS
CHANNEL
SPACE
2. When the remote-controllable distance gets shorter than before, replace
both batteries with new ones.
Move switch lever to match your area with a small screwdriver or
other pointed tool.
3. Placing the remote sensor in direct sunlight, or in direct light from a high
frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to prevent
malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
Speaker settings
19
6 Use the MULTI CONTROL knob or keys to select the appropriate
center speaker setting.
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, and surround speakers) as described below.
If you selected “LRG” as the front speakers setting,
MULTI CONTROL
SET UP
1 CNTR LRG (large):
A large center speaker is connected to
the receiver.
2 CNTR NML (normal): An average size center speaker is con-
nected to the receiver.
3 CNTR OFF:
Center speaker setting mode to the
receiver is OFF.
If you have selected “NML” as the front speakers setting,
1 CNTR ON: Center speaker setting mode to the receiver is
P
ON.
POWER
ON/STANDBY
(KRF-V7050)
2 CNTR OFF: Center speaker setting mode to the receiver is
OFF.
7 Press the SET UP key again to accept the setting.
• The surround speaker setting indication “SURR” appears.
SET UP
8 Use the MULTI CONTROL knob or keys to select the appropriate
surround speaker setting.
MULTI
CONTROL
If you selected “LRG” as the center speaker setting,
1 SURR LRG (large):
Large surround speakers are con-
nected to the receiver.
2 SURR NML (normal): Average size surround speakers are
RC-R0613
connected to the receiver.
3 SURR OFF:
Surround speaker setting mode to the
receiver is OFF.
RC-R0720
Turn on the power to this receiver by pressing
POWER ( ) key.
If you have selected other than “LRG” as the center speaker
setting,
1
1 SURR ON:
Surround speaker setting mode to the receiver
is ON.
2 SURR OFF: Surround speaker setting mode to the receiver
2Select a speaker system.
1 Press the SET UP key such that the subwoofer setting
is OFF.
indication “SUBW ON” appears.
STEREO
9 Press the SET UP key again to accept the setting.
SP
A
L
R
SW
• The receiver enters the speaker volume level adjustment mode.
• In steps 3 and 4, indications appear only for the selected channels
of the speakers that require adjusting.
2 Use the MULTI CONTROL knob or keys to select the appro-
priate subwoofer setting.
3Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The
volume levels from each speaker should be the same.
1 SUBW ON: Subwoofer setting mode to the receiver is ON.
2 SUBW OFF: Subwoofer setting mode to the receiver is OFF.
1 Use the MULTI CONTROL knob or keys to adjust the volume
level of the test tone output from the speaker channel to be
adjusted.
• The initial setting is “SUBW ON”.
• When the setting “SUBW OFF” is selected, the front speakers are
automatically set to “FRNT LRG” and the procedure skips to step5.
• When subwoofer output sound is required, select “FRNT NML”.
The channel indication blinks while the test tone is being output.
3 Press the SET UP key to accept the setting.
• The front speakers setting indication “FRNT” appears.
SP
A
L
STEREO
SP
A
L
R
SW
The test tone is heard from the speakers in the following
sequence for 2 seconds each:
4 Use the MULTI CONTROL knob or keys to select the appropri-
ate front speakers setting.
• Ifyouchangethevolumelevelsettingsforthespeakerswhilelistening
to music, the settings referred to on this page are also changed.
•
• If the speaker setting selects are OFF, the speaker level settings are
reset.
1 FRNT NML (normal): Average size front speakers are
connected to the receiver.
2 FRNT LRG (large):
Large front speakers are con-
nected to the receiver.
• For “FRNT LRG” selection, no sound will be heard from SUBW
even when it is set to ON. However, if you select CINEMA EQ when
subwoofer is selected, you will be able to hear sound from the
subwoofer.
2 Press the SET UP key.
• The test tone is turned off. The receiver enters the mode for inputting
the distance to the speakers.
When in STEREO mode, the sound goes directly to front speaker.
5 Press the SET UP key to accept the setting.
Continued to next page
• The center speaker setting indication “CNTR” appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
Normal playback
Preparing for playback
20
4Input the distance to the speakers.
Some preparatory steps are needed before starting playback.
1 Measure the distance from the listening position to each of
the speakers.
INPUT MODE
ON/STANDBY
AUTO/CINEMA EQ.
Jot down the distance to each of the speakers.
Distance to front speakers:
Distance to center speaker:
Distance to surround speakers:
____ feet (meters)
____ feet (meters)
____ feet (meters)
2 Use the MULTI CONTROL knob or keys to select the dis-
tance to the front speakers.
The speaker indicator to be adjusted blinks.
POWER
INPUT SELECTOR
(KRF-V7050D)
SP
A
L
R
SPEAKERS A/B
Selecting the input mode
EO
S
T
E
R
Indication in feet Indication in meters
If you have selected a component connected to the CD/DVD, VIDEO2,
VIDEO3 or DVD/6ch jacks, make sure that the input mode setting is
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable
in 1 foot (0.3 m) increments.
correct for the type of audio signal to be used.
9
3 Press the SET UP key to accept the settings.
Selecting MD/TAPE
4 Repeat steps 2 and 3 to input the distance for each of the
Select the source name corresponding to the component connected
to the MD/TAPE jacks. The initial factory setting is “TAPE”. To change
the source to “MD,” follow the steps below:
speakers.
5 Setup is complete when the input indication reappears.
Operations
1 Use the INPUT SELECTOR knob to select “TAPE”.
SP
A
L
R
SW
2 Hold down the AUTO/CINEMA EQ. key for more than 2
seconds.
• The source indication changes to “MD”.
• To return to the original indication, repeat procedure 2.
Display when all speakers have been selected.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
Selecting the speaker system
Press the SPEAKERS A or B key to select the speaker system
to be used.
Input level adjustment (analog sources only)
A ON
: Sound from the speakers connected to the SPEAKERS A
terminals on the rear panel.
If the input level of an analog source signal is too high, the CLIP
indicator will blink to indicate the source signal. Adjust the input level.
B ON
: Sound from the speakers connected to the SPEAKERS B
terminals on the rear panel. No sound will be heard from
the subwoofer.
CLIP
A+B ON : Sound from both the speakers connected to the
SPEAKERS A and B terminals on the rear panel.
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones for stereo sound in all playback
modes.
1 Use the INPUT SELECTOR knob to select the source of
which the input level you want to adjust.
• You can store a separate input level for each input source. If the
MONITOR function is ON, you can store an input level for when
MONITOR is on independently of the input levels for the input
sources.
The indicator for the speakers
you want to use should be lit.
SP
A
B
L
R
SW
2 Press the SOUND key repeatedly until the “INPUT” indication
appears.
• Selecting “6ch INPT” by pressing the INPUT MODE key, whereby “DVD/
6ch” is the input source will cause SPEAKER A to be selected automati-
cally.
3
Use the MULTI CONTROL knob or keys to adjust the input level.
SP
A
L
R
SW
STEREO
Turning on the receiver
1 Turn on the power to the related components.
• The adjustment mode is displayed for approximately eight
seconds.
• The input level may be adjusted to any one of three settings: 0dB,
-3dB, and -6dB. (The initial setting is 0dB.)
2 Turn on the power to this receiver by pressing POWER and
ON/STANDBY keys.
4 Press the SOUND key again to return to the input indication.
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Adjusting the sound
Listening to a source component
21
MULTI CONTROL
SOURCE DIRECT
VOLUME CONTROL
INPUT SELECTOR
SOUND
SPEAKERS A/B
PHONES
MUTE
VOLUME CONTROL
VOLUME
VOLUME
MULTI
CONTROL
SOUND
SOUND
MULTI
INPUT
SELECTOR
INPUT
SELECTOR
CONTROL
VOLUME
B. BOOST
VOLUME
MUTE
RC-R0613
RC-R0720
BASS
BOOST
RC-R0613
Use the INPUT SELECTOR knob to select the source you
RC-R0720
1
want to listen to.
The input sources change as shown below:
Selecting a source using the INPUT SELECTOR knob.
Adjusting the tone
1 “PHONO”
2 “TUNER”
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
O
3 “CD/DVD”
4 “TAPE” or “MD”
5 “VIDEO1”
6 “VIDEO2”
7 “VIDEO3”
8 “DVD/6ch”
9 “AV AUX”
1 Press the SOUND key to select the tone mode to be adjusted.
BASS:Select this to adjust the low frequency range.
(Press the SOUND key once.)
TREB: Select this to adjust the high frequency range.
(Press the SOUND key twice.)
STEREO
SP
A
L
R
SW
2Start playback from the selected source.
2 Use the MULTI CONTROL knob or keys to adjust the sound
quality.
Use the VOLUME CONTROL knob or VOLUME keys to
adjust the volume.
3
• The bass and treble levels are adjustable from -10dB to +10dB in 2
step increments.
• The adjustment item is displayed for approximately 8 seconds.
Once-touch low frequency emphasis (bass boost)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
Press the B. BOOST or BASS BOOST key.
• Press the key once to select the maximum (+10dB) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality or
ambience effects adjustment mode.
Switching back to the previous setting
Press the B. BOOST or BASS BOOST key again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Normal playback
Recording audio (analog sources)
22
Muting the sound
The MUTE key lets you mute the sound of the speakers.
MONITOR
Press the MUTE key.
SP
A
MUTE
L
R
SW
Blinks
To cancel
INPUT SELECTOR
Press the MUTE key again so that the “MUTE” indicator goes off.
Recording a music source
• MUTE ON can also be deactivated by turning the volume control
knob.
1 Use the INPUT SELECTOR knob to select the source (other
than “MD/TAPE”) you want to record.
SOURCE DIRECT playback (for analog input sources only)
2 Set the cassette deck or MD recorder to record.
3 Start playback, then start recording.
Use this function to pass the source material direct to the amplifier,
bypassing any audio processing.
Press the SOURCE DIRECT key.
Recording tapes or MD (with MONITOR function)
S.DIRECT
MONITOR = MD/TAPE recording
1 Press the MONITOR key.
• When you press the LISTEN MODE, SOUND, or SET UP keys,
or switch to another input source, SOURCE DIRECT playback will
be canceled.
O
STEREO MONITOR
• If CINEMA EQ. is switched ON, SOURCE DIRECT key will not be
effective.
• If SOURCE DIRECT is switched ON, CINEMA EQ. function will not
be effective.
2 Use the INPUT SELECTOR knob to select a source other than
“MD/TAPE”.
3 Start playback on the cassette deck connected to the
MONITOR jacks and start recording on the cassette deck or
MD recorder connected to the MD/TAPE jacks.
To cancel
Press the SOURCE DIRECT key again.
MD/TAPE = MONITOR recording
• If SOURCE DIRECT playback was activated while in surround mode,
canceling SOURCE DIRECT playback will reactivate the previous
surround mode.
1 Use the INPUT SELECTOR knob to select “MD/TAPE.”
2 Start playback on the cassette deck connected to the MD/TAPE
jacks and start recording on the cassette deck or MD recorder
connected to the MONITOR jacks.
Listening with headphones
1 Press the SPEAKERS A or B key so that the speaker indica-
tor goes off.
• To copy tapes using a double cassette deck, refer to the
instruction manual of the double cassette deck.
Make sure the SPEAKERS
indicators are turned off.
MONITOR function (analog sources only)
You can connect a cassette deck or graphic equalizer to the MONITOR
jacks of the receiver. If a graphic equalizer is connected, the MONITOR
key should be left in the on position. Alternately, if a cassette deck
equipped with a 3-head system is connected to the MONITOR jacks,
you will be able to monitor the just-recorded signal while making
recordings on the cassette deck. By switching the MONITOR key on
and off, you can compare the sound of the source signal and the just-
recorded signal. For more information, refer to the instruction manual of
the connected component.
SP
A
• If you turn off all of the speakers when in surround mode, the
surroundmodewillbecanceledaswell, resultinginstereoplayback.
2 Connect headphones to the PHONES jack.
PHONES
3 Use the VOLUME CONTROL knob or VOLUME keys to adjust
the volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them by
one-touch operation.
Recording video
1 Use the INPUT SELECTOR to select the video source (other than
23
“VIDEO1”) you want to record.
Tuning radio stations
MULTI CONTROL
2 Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due to
INPUT SELECTOR
the copy guard condition.
t
Recording audio (digital sources)
Switch on the REC mode to record a digital input source.
Usually use the A-REC (Auto-Record) mode to record audio input
sources. When the digital mode changes during recording in the A-REC
mode, the audio input source may be interrupted momentarily.
BAND AUTO/CINEMA EQ
MULTI
CONTROL
Recording music in A-REC or M-REC mode
DIMMER
BAND
AUTO
TUNER
RC-R0613
INPUT SELECTOR
RC-R0720
1 Use the INPUT SELECTOR knob to select the source (CD/
O
DVD, DVD/6ch, VIDEO2 or VIDEO3) you want to record.
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
1
2 Set the cassette deck or MD recorder to record.
2Use the BAND key to select the desired broadcast band.
3 Press and hold the DIMMER key for more than 2 seconds to
select the A-REC or M-REC mode.
Each press switches the band
as follows:
“AM” or “FM” indicator
appears in the display
• The mode changes every 2 seconds as shown below.
1 FM
2 AM
FM
MHz STEREO
AUTO
1 Rec mode off :
2 A-REC :
The digital input record mode is
switched off.
The digital input signals (DTS,
DolbyDigital,orPCM)areidentified
automatically and converted into
stereo signals that are ready for
recording.
Theinputsignaltypeatthemoment
this mode is selected is held
throughout this mode.
Use the AUTO/CINEMA EQ. key to select the desired
tuning method.
3
Each press switches the tuning method as follows:
3 M-REC :
“AUTO” indicator lights up
in the display.
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
FM
AUTO
For A-REC mode:
MHz STEREO
AUTO SOUND DIGITAL
PRO LOGIC
STEREO
• Normally, set to “AUTO” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
AUTO SOUND DIGITAL
PRO LOGIC
STEREO
Use the MULTI CONTROL knob or keys to select the
station.
4
For M-REC mode:
Frequency
display
“ST.” lights when a broadcast
AUTO SOUND DIGITAL
PRO LOGIC
STEREO
is being received in stereo.
FM
AUTO
ST.
MHz STEREO
TUNED
AUTO SOUND DIGITAL
PRO LOGIC
STEREO
“TUNED” is displayed when a
station is received.
4 Start playback, then start recording.
Auto tuning
:
The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
desired station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Presetting radio stations manually
MULTI CONTROL
Receiving preset stations in order (P.CALL)
24
MEMORY
P.CALL
4 / ¢
TUNER
RC-R0613
Tune to the station you want to store.
1
RC-R0720
2Press the MEMORY key while receiving the station.
Blinks for 5 seconds
Lights for 5 seconds
1Press TUNER key to select the tuner as the source.
FM
MEMO
MHz STEREO
AUTO
SP
A
L
R
SW
ST.
TUNED
2Use the P.CALL 4/ ¢ key to select the desired station.
• Each time you press the key, another preset station is received in
order.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
Pressing the P.CALL ¢ does the following:
Pressing the P.CALL 4 does the following:
Use the MULTI CONTROL knob to select one of the station
presets (1 – 40).
3
Operations
4Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and4 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Holding down the ¢ or 4 key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
Receiving preset stations
Numeric keys
TUNER
RC-R0613
RC-R0720
1Press TUNER to select tuner as the source.
Enter the number of the preset station you want to receive
(up to “40”).
2
Press the numeric keys in the following order:
For “15”, press.......... 0,5
For “20”, press.......... 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
repeatedly to return to the original display and start again.
FM
MHz STEREO
AUTO
SP
A
L
R
SW
ST.
TUNED
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
This receiver is equipped with listening modes that allow
you to enjoy an enhanced sonic ambience with a variety of
video sources.
In order to obtain the optimum effect from the surround
modes, make sure to input the proper speaker settings
25
Dolby Digital
The Dolby Digital surround format lets you enjoy up to 5.1 channels
of digital surround sound from Dolby Digital program sources (such
beforehand.
(
as Laserdisc or DVD software marked
). Compared with
previous Dolby surround, Dolby Digital provides even better sound
quality, greater spatial accuracy, and improved dynamic range.
Surround modes
Note
Although a full set of speakers (front left, right, and center, surround
left and right, and a subwoofer) is required for true 5.1 channel Dolby
Digital surround sound, this receiver lets you enjoy Dolby Digital (and
Dolby Surround) program sources, even if you connect only the front
speakers.
DTS
The DTS multi-channel audio format is available on CD, LD and DVD
software. DTS is a strictly digital format and can not be decoded inside
most CD, LD or DVD players. For this reason, if you attempt to listen to
DTS encoded software through the analog output of your new CD, LD
or DVD player, you will experience digital noise in most cases. This noise
can be quite loud if the analog output is connected directly to a high
power amplification system. Proper measures for playing the digital
output as described below should be taken to avoid this situation. To
enjoy DTS Digital Surround playback, an external 5.1 channel DTS
Digital Surround decoder system or an amplifier with a built-in DTS
Digital Surround decoder must be connected to the digital output (S/P
DIF, AES/EBU or TosLink) of a CD, LD or DVD player.
Center speaker
Subwoofer (SW)*
Front speakers (L, R)
All models are incorporated with the DTS decoder.
Surround speakers (L, R)
Center speaker
* LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep bass
sound effects.
O
Although only Dolby Digital soundtracks incorporate a separate low
frequency channel, connecting a subwoofer will also improve deep
bass performance in the other surround modes.
The indication “LFE” appears in the display when a signal is being
input for this channel.
Subwoofer (SW)*
Front speakers (L, R)
Surround speakers (L, R)
* Optional in this mode.
Dolby 3 Stereo
Dolby 3 Stereo is available for systems that do not have surround
speakers. When in the Dolby 3 Stereo mode, the surround information
is redirected to the front left and right speakers. This mode is designed
for use with Dolby Surround program sources, but can also improve
sound field unity for programs that are not Dolby Surround encoded.
Dialog positioning and sound image definition, however, may not be as
accurate when used with programs that are not Dolby Surround
encoded.
* LFE = Low Frequency Effects. This channel delivers separate
non-directional bass signals to the subwoofer for more dynamic
deep bass sound effects.
DTS has a .1 or LFE channel.
The indication “LFE” appears in the display when a signal is
being input for this channel.
Center speaker
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942 and other
worldwide patents issues and pending.
“DTS” and “DTS Digital Surround” are trademarks
of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights
reserved.
Subwoofer (SW)
Front speakers (L, R)
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic
and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1999 Dolby Laboratories, Inc.
All rights reserved.
“Circle Surround and the
® symbol are trademarks of SRS Labs, Inc.
in the United States and selected foreign countries. Circle Surround
technology is incorporated under license from SRS Labs, Inc”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
26
Dolby PRO LOGIC II
DSP mode
The DSP mode lets you add the atmosphere of a live concert or hall to
almost any type of program source. These modes are particularly effective
when used with stereo program sources, like CD, television, and FM radio.
You might enjoy trying the ARENA, JAZZ CLUB, THEATER, STADIUM or
DISCO mode the next time you watch a concert or sporting event!
Dolby Pro Logic II was designed specifically to provide a new sense of
spatiality, directionality and articulation of sounds from Dolby Surround
encoded sources (such as video and Laserdisc software marked
). This is achieved with an intelligent, built-in feedback
logic design, a matrix surround decoding and the decoding of stereo, full
bandwidth surround outputs. The PRO LOGIC II modes programmed
intothisreceiverare“MOVIE”, “MUSIC”and“PROLOGIC”. The“MOVIE”
mode of the PRO LOGIC II has preset characteristics to produce a
calibrated, high-level surround sound playback while the “MUSIC”
mode has user-adjustable characteristics to offer the three optional
controls, like “Dimension”, “Center Width” and “Panorama mode” to
allow optimization of the soundfields as desired. The “Dimension”
control allows the user to gradually adjust the soundfield either towards
the front or towards the rear; the “Center Width” control allows various
adjustment of the left-center-right speakers’ balance; the “Panaroma
mode” extends the front stereo image to include the surround speakers
for an exciting “wraparound” effect with side wall imaging.
Center speaker
Subwoofer (SW)
Front speakers (L, R)
Surround speakers (L, R)
Center speaker
What's DSP?
DSP stands for Digital Signal Processor.
The way a sound is heard in an actual environment depends on a variety
of different factors. One of the most important is reverberation (the act
of decaying elements of sound echoing in various places).
The DSP modes produce the feeling of presence by using the DSP to
create reverberation, without spoiling the sound quality of the original
signal.
Subwoofer (SW)
Front speaker (L, R)
Operations
Surround speakers (L, R)
DVD 6-channel mode
Using a DVD player or the like equipped with six (5.1) output channels
and the receiver, you can enjoy multi-channel encoded DVD source
material in all its splendor. Since the source signals are digital and each
channel is input independently, the resulting sound quality, sense of
spaciousness, and dynamic range are superb.
Multi channel music (SRS Circle Surround)
SRS Circle surround enables you to listen to multi channel sound from
the stereo source. We assume you have already enjoyed listening to
Dolby digital sound/DTS multi channel sound with your multi speakers.
Now, this time try listening to the stereo source (ex. Audio CD) using your
multi speakers. You may discover a new type of “stereo” sound through
SRS Circle Surround.
Center speaker
Center speaker
Subwoofer (SW)*
Front speakers (L, R)
Subwoofer (SW)
Surround speakers (L, R)
Front speakers (L, R)
Surround speakers (L, R)
* LFE = Low Frequency Effects. This channel delivers separate non-
directional bass singnals to the subwoofer for more dynamic deep
bass sound effects.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Surround play
When the DOLBY DIGITAL signal is input:
27
(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)
The DTS compatible models can reproduce a CD, DVD, or LD carrying
the DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
1 DOLBY DIGITAL: DOLBY DIGITAL surround
2 PL II MOVIE: PRO LOGIC II surround MOVIE mode
(The PRO LOGIC indicator lights up.)
3 PL II MUSIC: PRO LOGIC II surround MUSIC mode
(The PRO LOGIC indicator lights up.)
the
DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing
video, DVD, or LD software bearing the mark.
mark and DOLBY DIGITAL format digital broadcasts (etc.).
4 PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode
(The PRO LOGIC indicator lights up.)
INPUT MODE
INPUT SELECTOR
5 3 STEREO: 3-STEREO mode
(The 3 STEREO indicator lights up)
6 STEREO: Normal stereo playback
When you select DOLBY DIGITAL
“DOLBY DIGITAL” will be scrolled from right to left.
LISTEN MODE
AUTO SOUND DIGITAL
SP
A
L
LFE
C
R
SW
PRO LOGIC
SL
SL
SR
SR
S
When the DTS signal is input:
(The DTS indicator lights up.)
LSTN M.
1 DTS: DTS surround
2 STEREO: Normal stereo playback
INPUT
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input:
SELECTOR
1 PL II MOVIE: PRO LOGIC II surround MOVIE mode
(The PRO LOGIC indicator lights up.)
2 PL II MUSIC: PRO LOGIC II surround MUSIC mode
(The PRO LOGIC indicator lights up.)
RC-R0613
RC-R0720
O
Preparations
3 PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode
(The PRO LOGIC indicator lights up.)
4 3 STEREO: 3-STEREO mode
(The 3 STEREO indicator lights up.)
5 CIRCLE SURROUND: CS 5.1 surround
(The CS 5.1 indicator lights up.)
• Turn ON related components.
• Complete “Preparing for surround sound” (speaker settings).(
• Usethe INPUTSELECTORtoselectthecomponentyouwishtoplay
back with surround sound.
• Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back.
9
6 ARENA: DSP Surround ARENA mode.
7 JAZZ CLUB: DSP Surround JAZZ CLUB mode.
8 THEATER: DSP Surround THEATER mode.
9 STADIUM: DSP Surround STADIUM mode.
0 DISCO: DSP Surround DISCO mode.
- STEREO: Normal stereo playback. Sound is produced
from the two front channels only.
• Noise will be produced when a DTS source is played by selecting the
analog input.
1Start playing the video software.
Press the LISTEN MODE or LSTN M. key to select the
listening mode.
The listening mode settings are stored separately for each input. If the
input mode is set to digital auto (“AUTO SOUND” lights), the receiver
selects the optimal listening mode automatically based on the type of
input signal and the speaker settings.
2
• If Dolby Digital or DTS signal having more channels than the
maximum number of playback channels available using the
receiver’s current settings is input, the DOWNMIX indicator on
the front panel lights up and downmixing is performed to match
the number of available channels.
Each press of the LISTEN MODE or LSTN M. key switches the
setting as listed below.
The listening mode settings are different depending on the type
3Adjust the volume.
of input signal.
Notes
• Dependingonthetypeofthesignalorspeakersetting,somelistening
modes cannot be selected.
• When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listening
modes) from a single component, be sure to use a Dolby Digital
compatiblesourcecomponent. ConnecttheDolbyDigitalcompatible
sourcecomponent'sDolbyDigitalformatdigitalaudiosignaltooneof
the DIGITAL INPUT jacks on the back of the receiver. Connect the
normal audio signal correctly to the respective component's AUDIO
jacks.
0!@#
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DVD 6-channel playback
Convenient functions
28
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital such as DTS CD, no
sound is produced or, noise may be heard. To avoid this situation, make
sure that you connect the component to the receiver’s DVD/6ch. INPUT
jacks through a surround processor which can decode the surround
signal you want to listen to.
MULTI CONTROL
DIMMER
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
INPUT MODE INPUT SELECTOR
SOUND
SOUND
MULTI
CONTROL
RC-R0613
RC-R0720
Operations
DVD
Adjusting the sound
Youcanmakefurtheradjustmentstothesoundwhilelisteningtoplayback
in the surround mode.
RC-R0613
RC-R0720
1 Press the SOUND key until the desired item appears in the
display.
Preparations
Each time you press the button, the menu changes as follows:
Note that some items are not displayed in certain modes.
• Connect your DVD player to the DVD/6ch jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.
(
1 BASS (low frequency range sound quality adjustment -
PCM and analog stereo mode only)
2 TREB (high frequency range sound quality adjustment -
PCM and analog stereo mode only)
¡
¡
1Select “DVD/6ch” as the input source.
• If speaker system B is on when “DVD/6ch” is selected as the input
source, it switches off and speaker system A turns on automatically.
3 C (center speaker level adjustment)
4 SR (right surround speaker level adjustment)
5 SL (left surround speaker level adjustment)
6 SW (subwoofer level adjustment)
2Select "6ch INPT" by pressing the INPUT MODE key.
3Start playback of the DVD software.
4Adjust the volume.
7 INPUT (input level adjustment - analog mode only)
)
8 NIGHT (midnight mode on/off - Dolby Digital mode only)
9 CINEMA or MUSIC (Circle surround mode only)
0 PANORAMA (panorama mode on/off)*
- DIMENSION (dimension adjustment)*
= CENTER WIDTH (center width adjustment)*
* Pro Logic II Music mode only
• It is not possible to adjust the volume level or sound quality (SET UP,
SOUND) of the channels separately when the receiver is in the DVD/
6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
2 Use the MULTI CONTROL knob or keys to adjust the setting as
desired.
• The adjustment item is displayed for approximately 8 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
29
Dimension mode (Pro Logic II music mode only)
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the volume
as loud as normal. Midnight mode compresses the dynamic range of
previously specified parts of the Dolby Digital sound track (like scenes
with sudden increases in volume) to minimize the difference in volume
between the specified and non-specified parts. This makes it easy to hear
all of the sound track, even when listening at low volumes.
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND key repeatedly until “DIMENSION”
appears on the display.
• The DIMENSION indication scrolls across the display.
1 Press the SOUND key repeatedly until “NIGHT” appears on the
display.
• This can be selected only if CD/DVD, DVD/6ch, VIDEO2 or VIDEO3
is selected as the source and the listen mode is set to “DOLBY
DIGITAL.”
2 Use the MULTI CONTROL knob or keys to adjust the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
AUTO SOUND DIGITAL
PRO LOGIC
SP
CLIP
A
B
L
C
R
SW
SR
2 Use the MULTI CONTROL knob or keys to select the ON or
OFF setting.
SL
S
AUTO SOUND DIGITAL
SP
A
L
LFE
C
R
G
G
SL
SR
Soundfield is in neutral postion.
AUTO SOUND DIGITAL
PRO LOGIC
SP
CLIP
A
B
L
C
R
SW
SR
SL
S
• The adjustment item is displayed for approximately 8 seconds.
• Some Dolby Digital software may not be compatible with the Midnight
mode.
Soundfield is adjusted towards the rear.
AUTO SOUND DIGITAL
PRO LOGIC
SP
CLIP
A
B
L
C
R
SW
SR
Circle surround mode
SL
S
When you enjoy multi sound from the stereo source (Circle Surround),
you can select the circle surround mode.
Center width mode (Pro Logic II music mode only)
1 Press the LISTEN MODE or LSTN M. key repeatedly until
“CIRCLE SURROUND” appears on the display.
O
Center width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
2 Press the SOUND key repeatedly until “CINEMA” or “MUSIC”
appears on the display.
1 Press the SOUND key repeatedly until “CENTER WIDTH”
appears on the display.
3 Use the MULTI CONTROL knob or keys to select “CINEMA”
(for movies) or “MUSIC” (for music).
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not
be effective.
Panorama mode (Pro Logic II music mode only)
2 Use the MULTI CONTROL knob or keys to adjust the left-
center-right output.
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
Center image will be heard from center speaker only.
AUTO SOUND DIGITAL
PRO LOGIC
SP
CLIP
A
B
L
C
R
SW
SR
1 Press the SOUND key repeatedly until “PANORAMA” appears
SL
S
on the display.
• The PANORAMA setting indication scrolls across the display.
Center image will be heard from left and right speakers only.
AUTO SOUND DIGITAL
SP
CLIP
A
B
“PANORAMA” will be scrolled from right to left.
L
C
R
SW
SR
PRO LOGIC
AUTO SOUND DIGITAL
PRO LOGIC
SL
S
SP
CLIP
A
B
L
C
R
SW
SR
SL
S
• When in other postions, center image from center speaker, left and
right speakers can be heard simultaneously with various
combinations.
2 Use the MULTI CONTROL knob or keys to select
PANORAMA ON or OFF.
1 ON :PANORAMA mode is ON.
2 OFF :PANORAMA mode is OFF.
AUTO SOUND DIGITAL
PRO LOGIC
SP
CLIP
A
B
L
C
S
R
SW
SR
SL
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
30
Subwoofer adjustment
It is easy to adjust the volume of the subwoofer using the remote
control.
1 Press the SOUND key repeatedly until “SW” appears on the
display.
AUTO SOUND DIGITAL
SP
A
L
C
R
SW
SL
SR
2 Use MULTI CONTROL knob or keys to adjust the volume.
•The adjustment range is –10 dB to +10 dB.
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch movies
or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings. Select the
brightness level you find most pleasing.
PRO LOGIC
SP
A
L
C
S
R
SW
Operations
PRO LOGIC
SP
A
L
C
S
R
SW
PRO LOGIC
SP
A
L
C
S
R
SW
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to “STEREO”.
• When “96kHz” appears in the display, press the LISTEN MODE key
(the listen mode changes to the STEREO mode).
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
(For VR-507)
The remote control supplied with this receiver) is also capable
31
Repeat steps 2to 4to register additional components
until all components have been registered.
5
of controlling components from a variety of manufacturers once
you register the appropriate setup codes into the remote control
unit.
Notes
• Although each setup code is designed to work with a number of
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate. The remote
control is designed to retain setup codes in memory while you change
batteries.
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
• In case the code for TV/VCR combos does not work, enter the TV
code and the VCR code respectively after checking the codes (See
“Searching for your code”).
• For TV/VCR combos – if there is no separate TV code listed, enter the
code, enter “9-9-3,” and press VCR key instead.
Registering setup codes for other
components (RC-R0720)
LED
SET UP
Programming TV/VCR combo control
POWER
Source
keys
Perform the following instructions to control a TV/VCR Combo:
Turn on the TV/VCR Combo and insert a video cassette.
1
Numeric keys
• Read steps to completely before proceeding. You may want to
2
4
highlight or write down the code for the component you wish to
program before moving onto step
.
2
Press the VCR key once. Next, press and hold the SET UP
2key until the LED blinks twice, then release the SET UP
key.
RC-R0720
Use the setup codes for TV/VCR Combos to locate the
O
3brand name, then press the numeric key to enter the first
1Find the setup code of the component to be registered.
fl
four-digit code for your component.
• Refer to the setup code lists to find the setup code for the component
to be registered.
fi
• If performed correctly, the LED will blink twice.
• If the LED did not blink twice, repeat steps 2through 3 and try
entering the same code again.
Example: To register a DVD made by KENWOOD, you would enter
“0534”.
Point the remote control at the component and press the
POWER key once.
Input
Component
Maker
Code
Key
4
(DVD)
DVD player
KENWOOD
0534
DVD
• It should turn off. If it does not respond, repeat steps 2through 3,
trying each code for your component until you find one that works.
• If it still does not work, try searching for the code, see “Searching for
your code”.
¤
• If the device does not have a POWER key, press PLAY key instead.
If you have located a setup code that works, but it has a
5separate TV code, you will also need to program it into
the remote control to access the volume control as
follows:
1 Press the TV key once.
• The LED will blink twice.
2 Press the numeric key to enter the TV code for your TV/VCR
combo.
• If the code is correct, the LED will blink twice.
Press the source key (DVD, CBL, VCR, TV, DSS, CD,
2RECEIVER).
Press and hold the SET UP key until the LED blinks twice,
3then release the SET UP key.
If there is no separate TV code listed, you will need to
performthefollowingstepstoaccessthevolumecontrol:
Press the numeric key to enter the first four-digit code for
the component.
4
1 Press and the hold SET UP key until the LED blinks twice,
then release the SET UP key.
• If performed correctly, the LED will blink twice.
2 Press the numeric key to enter “9 - 9 - 3” .
• The LED will blink twice.
• Point the remote control at the component and press POWER key
once. It should turn ON/OFF but if it does not repeat step 2 to 4.
• If the component still does not work, try searching for the code.¤
• If the component does not have a POWER key, press PLAY key
instead.
3 Press the VCR key once.
•The LED will blink twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Searching for your code
Re-assigning device keys
32
If your component does not respond after trying all the codes listed for your
component, or if your component is not listed at all, try searching for your
code.
The remote control can be set up to control a second TV or VCR, or any
combination of eight home entertainment components.
For example, to control a TV, a Cable Converter, and two VCRs using the
remote control,you will need to re-assign the unused CD key to operate the
second VCR as follows:
For example, to search for a code for your TV:
Press the TV key once. Next, press and hold the SET UP
key until the LED blinks twice, then release the SET UP
key.
1
Press and hold the SET UP key until the LED blinks twice,
then release the SET UP key.
1
2
2Press the numeric key to enter “9 - 9 - 1”.
Press the numeric key to enter “9 - 9 - 2”.
• The LED will blink twice.
• The LED will blink twice.
Point the remote control at the TV and slowly alternate
between pressing the POWER and TV keys.
3Press the VCR key once, then press the CD key once.
3
To re-assign other device keys, repeat steps 1 through
3by substituting the key sequence from the below chart
for the most popular components:
4
• Stop when the TV turns ON/OFF.
• In the search mode, the remote control will send IR codes from its
librarytotheselecteddevice, startingwiththemostpopularcodefirst.
To re-assign key
4Press the SET UP key once to lock in the code.
Sequence
Perform
TV as 2nd VCR key
TV as 2nd CBL key
TV as 2nd RECEIVER key
TV as 2nd CD key
TV back to TV
SETUP - 9 - 9 - 2 - VCR -TV
SETUP - 9 - 9 - 2 - CBL - TV
SETUP - 9 - 9 - 2 - RECEIVER - TV
SETUP - 9 - 9 - 2 - CD - TV
SETUP - 9 - 9 - 2 - TV - TV
SETUP - 9 - 9 - 2 - TV - VCR
SETUP - 9 - 9 - 2 - CBL- VCR
To search for the codes of your other components, repeat
5steps 1through 4, but substitute the appropriate key
(i.e., DVD, CBL, VCR, TV, DSS, CD or RECEIVER) for the
component you are searching for.
VCR as 2nd TV key
VCR as 2nd CBL key
Operations
VCR as 2nd RECEIVER key SETUP - 9 - 9 - 2 - RECEIVER - VCR
Checking the codes
VCR as 2nd CD key
VCR back to VCR
SETUP - 9 - 9 - 2 - CD - VCR
SETUP - 9 - 9 - 2 - VCR - VCR
If you have set up the remote control using the procedures described in
“Searching for your codes”, you may need to find out which four-digit
code is operating your equipment:
• When a re-assignment is done, the LED will blink twice to confirm your
choice. At that time, you will need to program the remote control in
order to control the new component.
For example, to find out which code is operating your TV:
Press the TV key once. Next, press and hold the SET UP
1key until the LED blinks twice, then release the SET UP
key.
Press the numeric key to enter “9 - 9 - 0”.
2
• The LED will blink twice.
To view the code for the first digit, press “1” once. Wait
3for 3 seconds, count the number of times the LED blinks
(e.g., blinks = 3) and write down that number.
• If a code digit is “0”, the LED will not blink.
Repeat step 3three more times for the remaining digits.
4Use “2” for the second digit, “3” for the third digit, and
“4” for the fourth digit.
To check the codes of your other components, repeat
5steps 1through 4, but substitute the appropriate key
(i.e., DVD, CBL, VCR, TV, DSS, CD or RECEIVER) for the
component you are checking.
• As suggested earlier on, write down each of the four- digit code.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Changing volume lock
Operating other components
33
The remote control is set to control volume of a component through your
TV while in the TV, VCR, or Cable mode. However, in an Audio mode (i.e.
CD), you have separate control of your audio component’s volume. If your
TV is not remote controllable, or if you want volume to be controlled by a
different component, you can change the Volume Lock setting to control a
volume through a non-associated mode (e.g.,through the cable in the TV
mode).
This operation lets you operate the registered components.
KENWOOD audio components with system control turn on and off
automatically with the receiver via the system control connections.
POWER
Source
keys
RECEIVER
To change Volume Lock to the another mode:
Numeric keys
SET UP
1 Press and hold the SET UP key until the LED blinks twice, then
release the SET UP key.
2 Pressthenumerickeytoenter“9-9-3”, thenpressanymodekey
once (except TV).
• The LED will blink twice.
3 At this point, whenever you press the VOLUME +/– keys, or the
MUTE key, volume will be controlled by your mode choice.
RC-R0720
4 To unlock, press the SET UP key until the LED blinks twice, and
press the numeric key to enter “9-9-3”, then press the VOLUME
+ key.
Use the input selector keys to select the component you
1desire.
• The LED will blink 4 times upon being unlock.
• Pressing the input selector keys also changes the input selector on
the receiver.
To change Volume Lock back to the TV mode:
• When you operate your registered TV, VCR, or DVD player, go
to step 2.
1 Press and hold the SET UP key until the LED blinks twice, then
release the SET UP key.
• When you operate the CD player, Cassette deck, MD player, or
Tuner with system control connection, go to step 3.
2 Press the numeric key to enter “9 - 9 - 3”, then press the TV
key.
Press the source key.
2
• The LED will blink twice.
w
3Press the operation keys you desire.
3 At this point, whenever you press the VOLUME +/– keys, or
MUTE key, volume will be controlled by your TV.
• To return to the receiver operation mode, press the RECEIVER key.
4 To unlock, press the TV key, then the SET UP key until the
LED blinks twice, and press the numeric key to enter “9-9-3”,
then press the VOLUME – key.
Notes
• Be sure to point the remote control at the remote sensor on the
receiver when you want to operate KENWOOD components con-
nected by system control cords. Otherwise, point the remote control
at the component you want to operate.
• The LED will blink 4 times upon being unlock.
• To initialize the remote control, press the SET UP key until the LED
blinks twice. Then press the numeric key to to enter “9-8-0”. The LED
blinks twice.
Source key
TV
Other components
TV
VCR
CBL
DVD
DSS
VCR, Audio Cassette, DVD, LD, DAT
Cable, Video Accessories, DSS, Satellite
VCR, Audio Cassette, DVD, LD
Satellite, DSS, CABLE, Video Accessories
R
CD
CD, Home Automation, MD, Amplifier, Tuner,
Miscellaneous Audio
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
(For KRF-V7050D)
34 The remote control supplied with this receiver is also
capable of controlling components from a variety of
manufacturers once you register the appropriate setup
codes into the remote control unit.
Repeat steps 2to 3to register additional components
until all components have been registered.
4
Note
Although each setup code is designed to work with a number of different
models, certain codes may not work with some models. (Also, certain
codes may only operate some of the functions available on a given
model.)
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate. The remote
control is designed to retain setup codes in memory while you change
batteries.
Operating other components (RC-R0613)
Registering setup codes for other components
(RC-R0613)
This operation lets you operate the registered components.
KENWOOD audio components with system control turn on and off
automatically with the receiver via the system control connections.
POWER
POWER
Numeric
Source
keys
POWER
Source
POWER
keys
keys
RECEIVER
1Find the setup code of the component to be registered.
• Refer to the setup code lists to find the setup code for the component
Use the input selector keys to select the component you
desire.
1
to be registered.
·
Example: To register a DVD made by KENWOOD, you would enter
“805”.
• Pressing the input selector keys also changes the input selector on
the receiver.
Input
Component
Maker
Code
Key
• When you operate your registered TV, VCR, DVD player, Cable
tuner, or DSS receiver, go to step 2.
(DVD)
DVD player
KENWOOD 805, 808
DVD
• When you operate the CD player, Cassette deck, MD player, or
Tuner with system control connection, go to step 3.
2Press the source POWER key.
RemoteControl
w
3Press the operation keys you desire.
• To return to the receiver operation mode, press the RECEIVER key.
The remote control mode returns to the receiver operation mode
when you do not operate for more than 15 seconds.
Hold down the POWER key and press the numeric keys to
enter the setup code.
• Example: Press “805” to register a DVD player made by KENWOOD.
• If you push an invalid key, the remote will exit the setup mode.
2
3
Note
Be sure to point the remote control at the remote sensor on the receiver
when you want to operate KENWOOD components connected by
system control cords. Otherwise, point the remote control at the compo-
nent you want to operate.
Press the source POWER (TV, VCR, DVD, CABLE, DSS)
key for more than 2 seconds, and check to see that the
component you want to control turns on.
If the component does not react, and there is more than one
setup code, enter another setup code and try again.
• If the component is already on, pressing the source POWER keys for
more than 2 seconds will turn it off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart (for VR-507 (RC-R0720))
TV Setup codes
35
Maker
AOC
Admiral
Aiko
Akai
Alaron
Ambassador
America Action
Ampro
Setup codes
0030, 0019
0093, 0463
0092
0030
0179
0177
0180
0751
0180
0451,0180, 0092, 0623
0180
0019
0154, 0016
0180
0019
0236, 0463
0180
0030, 0056
0030
0054
0000
0451, 0092
0060, 0030, 0056, 0039,
0092
0056
0180
0180
0054
0180, 0039
0047, 0054, 0154, 0051,
0451, 0093, 0060, 0030,
0145, 0056, 0016, 0039,
0166, 0466, 1147, 1347
0451, 0019, 0039, 0092,
0623, 0624
Maker
KEC
KTV
Kenwood
LG
LXI
Setup codes
0180
0180, 0030, 0039
0030, 0019
0056
0047, 0054, 0154, 0156,
0178
0016
Maker
Scott
Setup codes
0236, 0180, 0178, 0019,
0179
0047, 0054, 0154, 0156,
0178, 0179, 0056, 0171
0180
0156
0093, 0165, 0039
0019
0016
0000
0180, 0178, 0179
0171
0180
0000
0054, 0030
0171
0178, 0056, 0177
0093
0051, 0250
0179
Sears
Semivox
Semp
Sharp
Shogun
Signature
Sony
Soundesign
Squareview
Starlite
Supreme
Sylvania
Symphonic
TMK
Logik
Luxman
MGA
0056
0150, 0030, 0178, 0019
0060, 0030, 0019, 0056
0054, 0030, 0179
0016
0054, 0030
0250
0178, 0145
0154, 0250, 0463, 0150,
0178, 0179, 0056, 0016
0047, 0017, 0051, 0039,
0135
0021
0093, 0150, 0178, 0019
0093
0180
0156, 0178, 0166
0030, 0019, 0056
0092
0030, 0178, 0092
0180
0154, 0250, 0166
0093, 0165
0236, 0463, 0179
0051, 0250
0047, 0156, 0051, 0060,
0030, 0178, 0021, 0019,
0056, 0039, 0135, 1347
0054, 0463, 0030, 0145,
0019
0054
0030, 0019, 0039
0166
0019,0039, 0092
0051
Anam
MTC
Audiovox
Baysonic
Belcor
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
Candle
Carnivale
Carver
Celebrity
Cineral
Citizen
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
Midland
Tandy
Technics
Technol Ace
Techwood
Teknika
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
Onwa
Optimus
Optonica
Orion
Panasonic
Penney
0051, 0056
0054, 0180, 0150, 0060,
0019, 0179, 0056, 0016,
0039, 0092
0056
0154, 0156, 0060
0039
Telefunken
Toshiba
Totevision
Vector Research 0030
Victor
Vidikron
Vidtech
Wards
Concerto
Contec
Craig
Crosley
Crown
0053
0054
0178, 0019
0054, 0165, 0030, 0178,
0021, 0019, 0179, 0056,
0016
Curtis Mathes
Daewoo
White Westinghouse 0463, 0623, 0624
Yamaha
Zenith
0030, 0019
0017, 0463, 0016, 0092,
0624
Daytron
Denon
Dumont
Dwin
Electroband
Emerson
0019
0145
Philco
Philips
Pilot
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
RCA
0017,0019
0720, 0774
0000
0154, 0236, 0463, 0180,
0282, 0178, 0019, 0179,
0039, 0177, 0623, 0624
0030
0154
0179
0180, 0179, 0171
0180
0047, 0051, 0451, 0093,
0282, 0178, 0021, 0135,
1147, 1347
0017, 0030, 0019
0030, 0178, 0019, 0056
0053, 0056
0047
Envision
Fisher
Fujitsu
Funai
Futuretech
GE
0178, 0466
0017, 0019
0051, 0250, 0165
0047, 0051, 0093, 0019,
0090, 0135, 1047, 1147,
1247, 1347
0047, 0154, 0165, 0180,
0030, 0178, 0019, 0056,
0039
0154, 0165, 0180, 0030,
0178, 0019, 0056, 0039
0017, 0030, 0603
0180, 0019
0030, 0039
0060, 0030, 0178, 0019,
0056
0039
0451
0463
0154
0019
0178
R
Radio Shack
Realistic
Gibralter
GoldStar
Gradiente
Grunpy
Hallmark
Harley Davidson 0179
Harman/Kardon 0054
Harvard
Hitachi
Infinity
Inteq
JBL
Runco
SSS
Sampo
Samsung
0180, 0179
0178
0180
Samsux
Sansei
Sansui
Sanyo
Scimitsu
Scotch
0145, 0056, 0016, 0151
0054
0017
0054
0000
0053
JCB
JVC
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart (for VR-507 (RC-R0720))
VCR Setup codes
36
Maker
Admiral
Adventura
Aiko
Aiwa
Akai
America Action
American High
Asha
Audiovox
Beaumark
Bell & Howell
Broksonic
CCE
Setup codes
0048,0209
0000
0278
0037, 0000
0041
0278
0035
0240
0037
Maker
Marta
Matsushita
Memorex
Setup codes
0037
0035, 0162, 0454
0035, 0037, 0048, 0039,
0047, 0240, 0000, 0104,
0209, 0162, 0046, 0454,
1162, 1262
Maker
Toshiba
Totevision
Unitech
Vector
Vector Research 0038
Video Concepts 0045
Videosonic
Wards
Setup codes
0045, 0043
0037, 0240
0240
0045
Minolta
Mitsubishi
Motorola
Multitech
NEC
Nikko
Noblex
Olympus
Optimus
0042
0240
0048, 0067, 0043
0035, 0048
0000, 0072
0104, 0067, 0041, 0038
0037
0060, 0035, 0048, 0047,
0081, 0240, 0000, 0042,
0072, 0149
0240
0104
White Westinghouse 0209, 0072, 0278
XR-1000
Yamaha
Zenith
0035, 0000, 0072
0038
0039, 0000, 0209, 0033
0184, 0121, 0209, 0002
0072, 0278
0037
0240
0035
Calix
Canon
0037, 0048, 0104, 0162,
0454, 1062, 1162, 1262
0035
Orion
0184, 0209, 0002
Carver
0081
Panasonic
0035, 0162, 0225, 0454,
1064, 1162, 1262
0035, 0037, 0240, 0042,
0038
0042
0035, 0209
0035, 0081
0037
0067
0081
0240
0060
0072
0039
0046
0046
0035, 0162, 0454, 1162
0060, 0035, 0048, 0240,
0042, 0149
0000
0037
0037
0035, 0037, 0048, 0047,
0000, 0104, 0046
0039
0042
0240, 0045
0048, 0039
0000, 0067, 0209, 0041,
0271
0047, 0240, 0104, 0046
0184, 0045, 0121, 0043
0035, 0037, 0047, 0000,
0042, 0104, 0046
0045
Cineral
Citizen
Colt
Craig
0278
0037, 0278
0072
0037, 0047, 0240, 0072,
0271
0060, 0035, 0041, 0162
0240
0045, 0278
0042
0000
0037
TV/VCR combos Setup codes
Penney
Maker
Setup codes
0035 (for TV use 0051)
0002, 0294,
0072
American High
Brocksonic
Colt
Pentax
Philco
Philips
Pilot
CurtisMathes
Cybernex
Daewoo
Curtis Mathis
Daewoo
Emerson
Funai
0035 (for TV use 0051)
0278
0002, 0294, 0479
0000
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Pulsar
Quarter
Quartz
Quasar
RCA
Denon
Dynatech
Electrohome
Electrophonic
Emerex
GE
0035 (for TV use 0051),
0060 (for TV use 0047),
0048 (for TV use 0093),
0240
0037
0032
Emerson
0037, 0184, 0000, 0121,
0043, 0209, 0002, 0278
0047, 0104
0035, 0033
0000
0060, 0035, 0048, 0240
0000
0526
Hitachi
0035 (for TV use 0051),
0000
Fisher
Fuji
Funai
HQ
Lloyds
MGA
0000
0000
0240
GE
Magnavox
0081 (for TV use 0054),
0035 (for TV use 0051),
0000
Radio Shack
Radix
Randex
Garrard
Go Video
GoldStar
Gradiente
HI-Q
Harley Davidson 0000
Harman/Kardon 0081, 0038
Harwood
Headquarter
Hitachi
Hughes Net. Sys. 0042
JVC
Jensen
KEC
KLH
Magnin
0240
0037, 0038
0000
0047
Realistic
Memorex
0037,
0162 (for TV use 0250)
RemoteControl
Runco
STS
Samsung
Sanky
Sansui
Mitsubishi
Orion
0048 (for TV use 0093)
0002, 0294, 0479
Panasonic
0035 (for TV use 0051),
0162 (for TV use 0250)
0072
0046
0000, 0042, 0041
Penney
0035 (for TV use 0051),
0240,
0162 (for TV use 0250)
Sanyo
Scott
Sears
Quasar
RCA
0035 (for TV use 0051),
0162 (for TV use 0250)
0060 (for TV use 0047),
0035 (for TV use 0051),
0048 (for TV use 0093)
0067, 0041
0041
0037, 0278
0072
Semp
Sansui
Sanyo
Sears
Sharp
Sony
0000, 0479
0240
0000, 0037
0048 (for TV use 0093)
0032 (for TV use 0000)
0000
Sharp
0048
0072
0240
0072
Kenwood
Kodak
LXI
Lloyd’s
Logik
MEI
0067, 0041, 0038
0035, 0037
0037
0000
0072
Shintom
Shogun
Singer
Sony
0035, 0032, 0000, 0033
0035, 0081, 0000, 0043
0000
Symphonic
Zenith
Sylvania
Symphonic
TMK
0035
0240, 0043
0000
MGA
0240
MGN Technology 0240
Tatung
Teac
Technics
Teknika
Thomas
0041
MTC
Magnasonic
Magnavox
0240, 0000
0278
0035, 0039, 0081, 0000,
0149
0240
0000, 0041
0035, 0162
0035, 0037, 0000
0000
Magnin
Marantz
0035, 0081
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DBS/DSS receiver Setup codes Receiver Setup codes
Setup code chart (for VR-507 (RC-R0720))
Cable tuner Setup codes
37
Maker
Setup codes
Maker
Setup codes
Maker
Setup codes
ABC
0003, 0008, 0014, 0017,
0007, 0011, 0013
0153, 0315
0153, 0797
0014
0153
0153, 0315
0040
0019
0002
0797
0015,0040
0400
AlphaStar
Chaparral
Echostar
Expressvu
General Instrument0627, 0361, 0869
HTS
Hitachi
Hughes Net. Sys. 0749
JVC
Jerrold
Magnavox
Memorex
Next Level
Panasonic
Philips
Primestar
RCA
Radio Shack
Realistic
Sony
0772
0216
0775
0775
ADC
Adcom
Aiwa
Akai
Capetronic
Carver
0531
0616
Allegro
Archer
0158, 0189, 0121, 0405
0224
0531
0189, 0008, 0042, 0360
0195
0195
0080
0004
0424
0042, 0219, 0360
0463, 0424
Bell & Howell
Century
Citizen
Comtronics
Contec
Eastern
Emerson
Everquest
Focus
Garrard
Gemini
0775
0819
Casio
Clarinette
Curtis Mathes
Denon
Emerson
Fisher
0775
0627, 0361
0724, 0722
0724
0869
0701
0724, 0722
0627, 0361
0566, 0143, 0392, 0855
0869
0052
0639
Garrard
0153
0015
Harman/Kardon 0110, 0189, 0891
JBL
JVC
Kenwood
0110
0074
General Instrument0476, 0276, 0011, 0810
GoldStar
Goodmind
Hamlin
Hitachi
Hytex
0144, 0040
0797
0020, 0259, 0009, 0034
0011
0007
0015, 0153, 0315
0003, 0012, 0476, 0276,
0014, 0015, 0011, 0810
0000
0063
0063
0019, 0007
0021
0000, 0107, 0021
0000
0153
0144, 0533, 0877
0027, 0186, 0042, 0077,
1570
0424
0181
0189
Koss
LXI
Linn
Lloyd’s
MCS
Magnavox
Marantz
Modulaire
NAD
Nakamichi
Onkyo
Optimus
Star Choice
Toshiba
Uniden
0869
Jasco
Jerrold
0195
0749, 0790
0724, 0722, 0052
0856
0039, 0346
0531, 0189, 0195, 0391
0039, 0189
0195
0320
0097, 0347
0135
0531, 0670, 0186, 0080,
0042, 0177, 0181, 0219,
0738, 0801, 1023
0039, 0309
0195
0189, 0391
0531, 0014, 0150, 0630,
0080, 1023
Zenith
Memorex
Movie Time
NSC
Oak
Optimus
Panasonic
Paragon
Philips
Pioneer
Popular Mechanics0400
Pulsar
Quasar
RCA
Radio Shack
Recoton
Regal
Regency
Rembrandt
Runco
Panasonic
Penney
Philips
0000
0000
0021
Pioneer
Quasar
RCA
0039
0015, 0315, 0797, 0883
0400
0020, 0259
0002
0011
0000
0040
0144, 0040
0531, 0054, 0346, 0360,
0530, 1023
Realistic
Sansui
Sanyo
Scott
Sharp
Sherwood
Sony
Soundesign
Teac
Technics
Victor
Wards
0195, 0163, 0181
0189, 0346
0219, 0801
0163, 0322
0186
0491, 0502
0158, 0168, 0474
0670
0463, 0163
0039, 0309, 0208
0074
0158, 0014, 0189, 0080,
0054
SL Marx
Samsung
R
Scientific Atlanta 0008, 0477, 0017, 0877
Signal
0015,0040
0011
0021
0003, 0015
0015, 0040, 0797
0015
0063
0040
0012, 0013
0000
0015
Signature
Sprucer
Starcom
Stargate
Starquest
TV86
Teleview
Tocom
Toshiba
Tusa
Yamaha
Yorx
Zenith
0176, 0186
0195
0857
Unika
0153
United Artists
Universal
Viewstar
Zenith
0007
0153, 0191
0063
0000, 0525
0400
Zentek
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DBS/DSS audio service Setup codes
Setup code chart (for VR-507 (RC-R0720))
38
CD player Setup codes
DVD player Setup codes
Maker
Aiwa
Burmester
Setup codes
0157, 0124
0420
Maker
Demon
GE
Setup codes
0490
0522
Maker
Aiwa
Fisher
Setup codes
0010, 0159, 0404
0052
California Audio Lab 0029, 0303
Harman/Kardon 0477
Harman/Kardon 0582
Carver
DKK
Denon
Emerson
Fisher
Garrard
Genexxa
Harman/Kardon 0157, 0173
0157, 0179, 0437
0000
JBL
JVC
0477
0073
0459, 0520
0056
JVC
0558
0534
0503
0539
0521
0503
0571
0490
0503, 0539
0525, 0571
0522
0522
0573
0533
0490
0571
0503
Kenwood
Magnavox
Marantz
Mitsubishi
Onkyo
Optimus
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sony
0003, 0873
0305
0179, 0174
0420, 0393
0032, 0305
Jerrold
RCA
Scientific Atlanta 0460
Sony
Starcom
0010, 0159
0459
Hitachi
JVC
Kenwood
0032
0072
Stereo Amplifier Setup codes
0028, 0037, 0190, 0626,
0681, 0826
0157
0305
0157
0029
0420
0157, 0305
0029, 0157, 0180
0157
Maker
Aiwa
Carver
Curtis Mathes
Denon
Harman/Kardon 0892
Setup codes
0406
0269
0300
0160
Krell
LXI
Linn
MCS
Technics
Theta Digital
Toshiba
Yamaha
Zenith
MTC
Magnavox
Marantz
Mission
NSM
Nikko
Onkyo
Optimus
0490, 0545
0503, 0591
JVC
Linn
0331
0269
0269
0269
Magnavox
Marantz
Panasonic
Philips
Pioneer
Polk Audio
RCA
Sony
Technics
Victor
0157
0174
0101, 0868
0308
LD player Setup codes
0269, 0892
0013, 0300
0269, 0892
0300
0220, 0689
0308
0331
0013
0354
0000, 0032, 0179, 0305,
0037, 0420, 0145, 0468,
0437
0029, 0303
0420
0157, 0626
0032, 0305, 0468, 0244
0157
Maker
Setup codes
0059
0059
0059
0059
0193, 0201
Denon
Mitsubishi
NAD
Pioneer
Sony
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
QED
Wards
Yamaha
0157
0157
Quasar
RCA
Realistic
Rotel
SAE
Sansui
Sanyo
Scott
Sears
Sharp
Sherwood
Sony
Soundesign
Tascam
Teac
Technics
Victor
Wards
Yamaha
Yorx
0029
Cassette deck Setup codes
0179, 0305, 0053, 0764
0179, 0420, 0180
0157, 0420
0157
0157, 0305
0179
0305
0305
0037, 0180, 0861
0180
0000, 0185, 0490
0145
Maker
Setup codes
Home Automation Setup codes
R
Aiwa
Carver
Denon
0029, 0197
0029
0076
Maker
GE
Setup codes
0240
Lutron
0597
Harman/Kardon 0182, 0029
One For All
Radio Shack
0167
0240
JVC
0244, 0273
0070
0029
Kenwood
Magnavox
Marantz
Onkyo
Optimus
Panasonic
Philips
Security System 0167
Universal X10
X10
0167
0167
0029
0135, 0282
0027, 0220
0229
0420
0029
0420, 0393, 0174, 0180
0029, 0303
0072
0157, 0053
0036, 0187
0461
Pioneer
Polk Audio
Sansui
0027, 0220, 0099
0029
0029
Sony
Technics
Victor
0243, 0170, 0291
0229
0273
Wards
0027
Yamaha
0097, 0094
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DVD Setup codes
Setup code chart (for KRF-V7050D (RC-R0613))
VCR Setup codes
TV Setup codes
39
Maker
Setup codes
801
802
803
804
805, 808
806
807
Maker
Setup codes
Maker
SONY
GE/RCA
RCA
Setup codes
JVC
SONY
SONY
301, 302, 303,
304, 305, 306
307
101
102
103, 104, 105,
106, 117
107, 108
109
110
111,112, 122
109
113
114, 115
116
117
118
109
119
120
121
123, 124
GE/HITACHI
RCA/HITACHI
PANASONIC
MAGNAVOX
TOSHIBA
PIONEER
PANASONIC
KENWOOD
TOSHIBA
PHILIPS
308
309, 310
311, 312, 313
314
315, 316, 317,
318
319, 320
321
322
323
324, 325, 326,
327
313
328, 329
330
ZENITH
MAGNAVOX
SHARP
MITSUBISHI
PANASONIC
SAMSUNG
JVC
HITACHI
PIONEER
PROSCAN
QUASAR
PHILIPS
SHARP
G.E
ZENITH
GOLD STAR
JVC
PHILIPS
HITACHI
SANYO
SANYO
TOSHIBA
MITUBISHI
LOEWE
TOSHIBA
331
CABLE Setup codes
DSS Setup codes
Maker
Setup codes
201, 202
203
204, 205
206, 207
208
Maker
Setup codes
901
902
903
904
905
906
907
908
JERROLD
S.ATLANTA
ZENITH
PIONEER
TOCOM
G.I.
HAMLIN
OAK
MACOM
GEMINI
RCA
G.I.
ECHOSTAR
TOSHIBA
PANASONIC
HUGHES
SONY
209
210, 211
212, 213, 214
215, 216, 217
218
HITACHI
PRIMESTAR
909
PHILIPS
PANASONIC
SAMSUNG
219, 220
221, 222
223
R
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
CASSETTE deck, CD player & MD recorder operations
40
You can perform these basic operations using the keys described below when connected to KENWOOD cassette
deck, MD recorder or CD player equipped with system control operations.
%
Cassette deck operations keys
POWER
SET UP
DVD
POWER
CBL
CD
VCR
TV
RECEIVER
1
4
7
0
2
5
3
6
9
DSS
TV
1
4
7
2
5
8
0
3
6
9
VCR
8
DVD
RETURN
LSTN M.
+10
MUTE
+10
ENTER
CABLE
MENU
SET UP
OSD
SOUND
DSS
¢
LISN.M
LAST
+
+
POWER
P.CALL
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
P.CALL
MULTI CONTROL
4
GUIDE
SETUP
P.CALL
EXIT/RETURN
MULTI CONTROL
P.CALL
¢
TUNING
ENTER
CINE.EQ
BAND
DVD
4
1 (Rewind)
¡ (Fast forward)
6 (3 Play)
7 (Stop)
SELECT
A/B+100
DISC SKIP
AUTO
B.BOOST
RECEIVER
TITLE
PHONO
TV SEL.
CD/DVD
INPUT SEL.
TUNER
REC M.
DIM.
MD/TAPE
CHANNEL
AV AUX
MULTI CONTROL
BAND
INFO/OSD
MENU
6 (Play)
¡ (Fast forward)
DVD
DISC SEL.
VIDEO3
1
REC
¶
6
¡
1 (Rewind)
2 (Play)
VIDEO1
VIDEO2
AUTO
A/B +100
7
8
8 (Pause)
7 (Stop)
PHONO TUNER MD/TAPE CD/DVD
MUTE
VOLUME
VIDEO1 VIDEO2
VIDEO3
DVD
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0613
RC-R0720
RemoteControl
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
CD player operation keys
41
POWER
SET UP
POWER
DVD
CBL
CD
VCR
TV
Numeric keys
(Select tracks)
RECEIVER
1
4
7
0
2
5
3
6
9
DSS
1
TV
2
5
8
0
3
6
9
VCR
4
Numeric keys
(Select tracks)
8
7
DVD
RETURN
LSTN M.
+10
MUTE
+10
ENTER
CABLE
MENU
SET UP
OSD
SOUND
DSS
¢
LSTN.M
LAST
+
+
POWER
P.CALL
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
P.CALL
MULTI CONTROL
4 (Skip down)
¢ (Skip up)
4
GUIDE
SETUP
EXIT/RETURN
MULTI CONTROL
P.CALL
4
P.CALL
¢
TUNING
ENTER
CINE.EQ
BAND
DVD
1 (Search)
¡ (Search)
6 (3 Play)
7 (Stop)
SELECT
4 (Skip down)
¢ (Skip up)
A/B+100
DISC SKIP
AUTO
B.BOOST
RECEIVER
TITLE
PHONO
DISC SKIP
TV SEL.
CD/DVD
INPUT SEL.
TUNER
MD/TAPE
CHANNEL
AV AUX
REC M.
DIM.
MULTI CONTROL
BAND
INFO/OSD
MENU
DVD
6 (Play/Pause)
DISC SEL.
VIDEO3
1
REC
¶
6
¡
VIDEO1
VIDEO2
AUTO
A/B +100
7
8
8 (Pause)
7 (Stop)
PHONO TUNER MD/TAPE CD/DVD
MUTE
VOLUME
VIDEO1 VIDEO2
VIDEO3
DVD
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0613
RC-R0720
MD recorder operation keys
POWER
SET UP
DVD
POWER
CBL
CD
VCR
TV
Numeric keys
(Select tracks)
RECEIVER
1
4
7
0
2
5
3
6
9
DSS
TV
1
4
7
2
5
8
0
3
6
9
VCR
Numeric keys
(Select tracks)
8
DVD
RETURN
LSTN M.
+10
MUTE
+10
ENTER
CABLE
MENU
SET UP
OSD
SOUND
DSS
¢
LSTN.M
LAST
+
+
POWER
P.CALL
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
P.CALL
R
MULTI CONTROL
4 (Skip down)
¢ (Skip up)
4
GUIDE
SETUP
P.CALL
EXIT/RETURN
MULTI CONTROL
P.CALL
¢
TUNING
ENTER
CINE.EQ
BAND
DVD
4
1¥¡ (1¥¡ Search)
6 (3 Play)
7 (Stop)
SELECT
4 (Skip down)
A/B+100
DISC SKIP
AUTO
¢ (Skip up)
B.BOOST
RECEIVER
TITLE
PHONO
+100 (+100)
TV SEL.
CD/DVD
INPUT SEL.
TUNER
MD/TAPE
CHANNEL
AV AUX
REC M.
DIM.
MULTI CONTROL
BAND
INFO/OSD
MENU
6 (3 Play)
DVD
DISC SEL.
VIDEO3
1
REC
¶
6
¡
1 (Backward Search)
¡ (Forward Search)
VIDEO1
VIDEO2
AUTO
A/B +100
7
8
8 (Pause)/+100 (+100)
7 (Stop)
PHONO TUNER MD/TAPE CD/DVD
MUTE
VOLUME
VIDEO1 VIDEO2
VIDEO3
DVD
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0720
RC-R0613
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Other components’ operations
Refer to the following for the type of remote control operations available for each component.
42
• When pressing keys in succession, press each key firmly and be sure to
wait at least 1 second before pressing the next key.
• Numeric keys function the same as the numeric keys on the original
remote.
1
2
Select the input source.
Press the keys corresponding to the operations you desire.
Refer to the following sections for details.
These keys can be used to perform the basic operations of KENWOOD and other makers’ components
which the setup code for each component had been entered beforehand.
⁄›
TV operation keys
POWER
SET UP
DVD
POWER
POWER
CBL
CD
VCR
TV
RECEIVER
Numeric keys
1
4
7
0
2
5
3
6
9
DSS
TV
1
4
7
2
5
8
0
3
6
9
VCR
Numeric keys
MUTE (Mute)
8
DVD
RETURN
LSTN M.
+10
MUTE
+10
ENTER
CABLE
MENU
SET UP
OSD
SOUND
DSS
¢
LSTN.M
+
+
LAST
SOUND
SLEEP
CINE.EQ
INPUT
POWER
P.CALL
CHANNEL +/–
(Channel +/–)
VOLUME +/–
(Volume +/–)
VOLUME
DVD CHANNEL
P.CALL
MULTI CONTROL
4
GUIDE
SETUP
P.CALL
EXIT/RETURN
INPUT
GUIDE
MULTI CONTROL
ENTER (Enter)
P.CALL
¢
TUNING
ENTER
CINE.EQ
BAND
DVD
4
SELECT (Select)
SELECT
A/B+100
DISC SKIP
AUTO
B.BOOST
RECEIVER
TITLE
PHONO
INPUT SEL. (Input Selector)
TV SEL. (TV Selector)
TV SEL.
CD/DVD
INPUT SEL.
TUNER
INFO/OSD
REC M.
DIM.
MD/TAPE
CHANNEL
AV AUX
MULTI CONTROL
BAND
INFO/OSD
MENU
DVD
DISC SEL.
VIDEO3
1
REC
¶
6
¡
VIDEO1
VIDEO2
AUTO
A/B +100
7
8
MUTE
PHONO TUNER MD/TAPE CD/DVD
MUTE
VOLUME
VIDEO1 VIDEO2
VIDEO3
DVD
RC-R0720
RC-R0613
CD player operation keys
RemoteControl
POWER
SET UP
DVD
CBL
CD
VCR
TV
RECEIVER
DSS
1
2
5
8
0
3
6
9
4
Numeric keys
(Selected tracks)
7
MUTE
+10
ENTER
¢
LSTN.M
LAST
+
+
¢ (Skip up)
4 (Skip down)
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
4
GUIDE
SETUP
EXIT/RETURN
MULTI CONTROL
P.CALL
4
P.CALL
¢
SELECT
REC M.
DIM.
MULTI CONTROL
BAND
INFO/OSD
MENU
6 (Play/Pause)
1
REC
¶
6
¡
AUTO
A/B +100
7
8
8 (Pause)
7 (Stop)
PHONO TUNER MD/TAPE CD/DVD
VIDEO1 VIDEO2
VIDEO3
DVD
Continued to next page
RC-R0720
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
VCR operation keys
43
POWER
SET UP
DVD
CBL
CD
VCR
TV
POWER
RECEIVER
DSS
Numeric keys
1
4
7
0
2
5
3
6
9
1
4
7
2
5
8
0
3
6
9
TV
Numeric Keys
VCR
8
MUTE
+10
DVD
RETURN
LSTN M.
ENTER
+10
¢
LISN.M
LAST
CABLE
+
+
MENU
SET UP
OSD
SOUND
DSS
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
CHANNEL +/–
(Channel +/–)
POWER
P.CALL
P.CALL
4
GUIDE
SETUP
P.CALL
EXIT/RETURN
MULTI CONTROL
MULTI CONTROL
P.CALL
¢
4
TUNING
ENTER
CINE.EQ
BAND
DVD
1 (Rewind)
¡ (Fast forward)
SELECT
6 (3 Play)
7 (Stop)
A/B+100
DISC SKIP
AUTO
B.BOOST
8 (Pause)
INPUT SEL.
RECEIVER
TITLE
PHONO
REC M.
DIM.
MULTI CONTROL
BAND
(Input Selector)
TV SEL.
CD/DVD
INPUT SEL.
TUNER
INFO/OSD
MENU
6 (3 Play)
¡ (Fast forward)
MD/TAPE
CHANNEL
AV AUX
1
REC
¶
6
¡
1 (Rewind)
¶ REC
DVD
DISC SEL.
CINE.EQ
AUTO
A/B +100
VIDEO1
VIDEO2
7
8
8 (Pause)
7 (Stop)
PHONO TUNER MD/TAPE CD/DVD
VIDEO1 VIDEO2
VIDEO3
DVD
MUTE
VOLUME
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0613
RC-R0720
DVD player operation keys
POWER
SET UP
POWER
POWER
DVD
DSS
CBL
VCR
TV
RECEIVER
Numeric keys
(Select tracks)
1
4
7
0
2
5
3
6
9
CD
TV
1
2
5
8
0
3
6
9
4
7
Numeric keys
(Select tracks)
VCR
8
DVD
RETURN
LSTN M.
MUTE
+10
ENTER
+10
ENTER
RETURN (Return)
MENU (Menu)
OSD (OSD menu)
CABLE
¢
MENU
SET UP
OSD
SOUND
DSS
LISN.M
LAST
+
+
POWER
P.CALL
%(Cursor »)
fi(Cursor «)
@(Cursor |)
#(Cursor \)
ENTER (Enter)
6 (3 Play)
7 (Stop)
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
P.CALL
R
4
MULTI CONTROL
GUIDE
SETUP
P.CALL
EXIT/RETURN
MULTI CONTROL
EXIT/RETURN
P.CALL
¢
4
TUNING
ENTER
AUTO
BAND
DVD
1 (Search)
¡ (Search)
%(Cursor »)
fi(Cursor «)
@(Cursor |)
#(Cursor \)
SELECT
A/B+100
DISC SKIP
B.BOOST
8 (Pause)
RECEIVER
TITLE
PHONO
TV SEL.
CD/DVD
INPUT SEL.
TUNER
REC M.
DIM.
INFO/OSD
1 (Backward search)
7 (Stop)
MENU (Menu)
MULTI CONTROL
BAND
MD/TAPE
CHANNEL
AV AUX
TITLE (Title)
INFO/OSD
MENU
DVD
DISC SEL.
VIDEO3
1
REC
¶
6
¡
¡ (Forward search)
6 (3 Play)
8 (Pause)
4 (Skip down)
¢ (Skip up)
VIDEO1
VIDEO2
AUTO
A/B +100
7
8
PHONO TUNER MD/TAPE CD/DVD
MUTE
VOLUME
VIDEO1 VIDEO2
VIDEO3
DVD
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0613
RC-R0720
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DBS/DSS receiver operation keys
44
POWER
SET UP
DVD
CBL
CD
VCR
TV
RECEIVER
POWER
DSS
Numeric keys
1
4
7
2
5
8
0
3
6
9
1
4
7
0
2
5
3
6
9
TV
Numeric keys
VCR
8
MUTE
+10
ENTER
DVD
RETURN
LSTN M.
¢
LISN.M
LAST
+10
+
+
CABLE
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
MENU
SET UP
OSD
SOUND
DSS
CHANNEL +/–
(Channel +/–)
MENU (Menu)
OSD (OSD menu)
%(Cursor »)
fi(Cursor «)
@(Cursor |)
#(Cursor \)
POWER
P.CALL
4
GUIDE
SETUP
P.CALL
EXIT/RETURN
P.CALL
MULTI CONTROL
MULTI CONTROL
P.CALL
¢
4
%(Cursor »)
fi(Cursor «)
@(Cursor |)
#(Cursor \)
ENTER (Enter)
SELECT
TUNING
ENTER
CINE.EQ
BAND
DVD
A/B+100
DISC SKIP
AUTO
B.BOOST
REC M.
DIM.
MULTI CONTROL
BAND
RECEIVER
TITLE
PHONO
INFO/OSD
MENU
TV SEL.
CD/DVD
INPUT SEL.
TUNER
1
REC
¶
6
¡
MD/TAPE
CHANNEL
AV AUX
AUTO
A/B +100
7
8
DVD
DISC SEL.
VIDEO3
VIDEO1
VIDEO2
PHONO TUNER MD/TAPE CD/DVD
VIDEO1 VIDEO2
VIDEO3
DVD
MUTE
VOLUME
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0613
RC-R0720
Cable tuner operation keys
POWER
SET UP
DVD
CBL
CD
VCR
TV
POWER
RECEIVER
DSS
1
4
7
0
2
5
3
6
9
1
2
5
8
0
3
6
9
TV
RemoteControl
4
7
VCR
8
DVD
MUTE
+10
RETURN
LSTN M.
ENTER
+10
¢
LISN.M
LAST
CABLE
MENU
SET UP
OSD
SOUND
DSS
+
+
SOUND
SLEEP
CINE.EQ
INPUT
VOLUME
DVD CHANNEL
POWER
P.CALL
P.CALL
4
GUIDE
EXIT/RETURN
MULTI CONTROL
3∑ (P. CALL +)
MULTI CONTROL
SETUP
P.CALL
4
P.CALL
¢
TUNING
ENTER
CINE.EQ
BAND
DVD
Tuning
BAND
AUTO
SELECT
3∑ (P. CALL +)
A/B+100
DISC SKIP
AUTO
B.BOOST
RECEIVER
TITLE
PHONO
REC M.
DIM.
MULTI CONTROL
BAND
TV SEL.
CD
INPUT SEL.
TUNER
INFO/OSD
MENU
MD/TAPE
CHANNEL
AV AUX
¡ (Tuning)
1
REC
¶
6
¡
1 (Tuning)
DVD
DISC SEL.
VIDEO3
BAND
AUTO
A/B +100
VIDEO1
VIDEO2
7
8
AUTO
PHONO TUNER MD/TAPE CD/DVD
VIDEO1 VIDEO2
VIDEO3
DVD
MUTE
VOLUME
DISC SEL. DISC SKIP BASS BOOST AV AUX
RC-R0613
RC-R0720
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
45
The microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the micro-
computer and return the unit to its normal operating condition.
For U.S.A. and Canada
Unplug the power cord from the wall outlet, then plug it
back in while holding down the POWER key.
For other countries
With the power cord plugged in, turn the POWER key
OFF. Then, while holding down the ON/STANDBY key,
press POWER.
• Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left the
factory.
Amplifier
Symptom
Remedy
Cause
No sound from the speakers.
• Connectthemproperlyreferringto“Connecting
• The speaker cords are disconnected.
the speakers”
^
• Adjust the volume to a proper level.
• Turn OFF the MUTE.
• Set the SPEAKERS switch(es) to ON.
• VOLUME is set to the minimum position.
• MUTE is ON.
• The SPEAKERS switches are set to OFF.
™
)
The standby indicator blinks and sound is
not output.
• Turn the power off, eliminate the short-circuit-
ing, then turn on the power again.
• Speaker cords are short-circuited.
• The speaker cord is disconnected.
Soundisnotoutputfromoneofthespeakers.
• Connect it properly referring to “Connecting the
speakers”.
^
Sound is not output from the surround
speakers and / or the center speaker, or their
sound is very small.
• Connect it properly referring to “Connecting the
• The surround speaker cords and/or the center
speaker cord is disconnected.
• A surround mode has not been engaged.
• The surround and/or center volume controls are
set to the minimum level.
speakers”.
^
• Select a surround mode.
• Adjust the speaker levels using the test tone.
(
A humming noise is generated when the
PHONO input selector is selected.
• Insert the audio cord plugs securely into the
PHONO jacks.
• The audio cord from the turntable is not con-
nected to the PHONO jacks.
• Connect the grounding wire to the GND termi-
nal on the rear panel.
• The turntable is not grounded.
When playing a Dolby Digital source signal
using a DVD player, the sound is cut off soon
after it starts.
• Set the input mode to digital manual before
starting playback of the Dolby Digital source.
9
• There are many possible causes for this prob-
lem, depending on the type of DVD player used.
No sound is produced during playback from
a DVD player.
• Press the INPUT MODE key to select to digital
• The input mode is set to digital manual.
• The software is copy-guarded.
auto mode.
9
A video source cannot be recorded
normally.
• Copy-guarded video software cannot be re-
corded.
Tuner
Symptom
Cause
Remedy
Radio stations cannot be received.
• No antenna is connected.
• Connect an antenna.
$
• The broadcast band is not set properly.
• Set the broadcast band properly.
• The frequency of the desired station is not • Tune the frequency of the desired station.
tuned.
£
Interference.
• Noise due to ignition noise from an automobile. • Install the outdoor antenna away from the road.
• Noise due to interference from an electric appli- • Turn off the power to the appliance.
ance.
• Noise due to a nearby TV set.
• Install the receiver farther away from the TV.
A station which was preset cannot be re- • The preset station belongs to a frequency that • Preset a station with a receivable frequency.
ceived by pressing the corresponding nu-
meric key.
cannot be received.
• The preset memory was cleared because the • Preset the station again.
power cord had been unplugged for a long
period of time.
A
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Remote control unit
46
Symptom
Cause
Remedy
Certain inputs cannot be selected using the
remote control.
• No setup codes registered at for the respective • Register a setup code at the respective input(s).
input(s). fi·
Remote control operation is not possible.
• The remote control is set to a different operation • Press the source select keys or source POWER
mode.
keys to select the appropriate operation mode.
• Batteries are exhausted.
• Replace with new batteries.
• The remote control unit is too far away from the • Operate the remote control unit within the con-
main system, controlling angle is too large, or
there is an obstacle between the receiver and
the remote.
trollable range.
• The audio cords and system control cords are • Connect properly referring to “Setting up the
not connected properly. system”.
• No software is loaded in the source component. • Place software in the source component you
want to play.
• An attempt is made to play a tape which is being • Wait until recording has completed.
recorded in the cassette deck.
• The remote control has not been set to the • Press the source select keys or source POWER
operation mode for the component you wish to
control.
keys to activate the operation mode for the
componentyouwanttocontrolbeforeoperation.
⁄›
• The microprocessor of the remote control mal- • Reset the microprocessor.
functions.
AdditionalInformation
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure safe
operation.
Specifications
For U.S.A and Canada
47
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
AUDIO section (VR-507)
Rated power output during STEREO operation
Optical ........................... (–15 dBm ~ –21 dBm), 660 nm 30nm
Coaxial ................................................................. 0.5 Vp-p / 75 Ω
100 watts per channel minimum RMS, both channels driven, at
8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω
S VIDEO inputs /outputs
Effective power output during SURROUND operation
FRONT (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven)
.............................................................................. 100 W + 100 W
CENTER (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven)
............................................................................................. 100 W
SURROUND (20-20kHz, 0.7% T.H.D. at 8 Ω one channel
driven) .................................................................. 100 W + 100 W
Total harmonic distortion ...........................0.05% (1 kHz, 50W, 8 Ω)
Frequency response
CD ............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM)........................................................................ 75 dB
CD ......................................................................................... 91 dB
Input sensitivity / impedance
PHONO (MM)......................................................... 2.5 mV / 27 kΩ
CD ......................................................................... 200 mV / 47 kΩ
MONITOR IN ........................................................ 200 mV / 47 kΩ
DVD/6CH INPUT .................................................. 200 mV / 47 kΩ
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 kΩ
MONITOR OUT ...................................................... 200 mV / 1 kΩ
PRE OUT (SUBWOOFER)...................................... 1.5 V / 2.2 kΩ
Tone control
S VIDEO (luminance signal) .................................. 1 Vp-p / 75 Ω
S VIDEO (chrominance signal)....................... 0.286 Vp-p / 75 Ω
FM tuner section
Tuning frequency range ................................ 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)
VR-507 .... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)
KRF-V7050D...... 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO ................................................... 28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO ............................................................0.5% (65 dBf input)
STEREO ........................................................0.7% (65 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO .......................................................... 75 dB (65 dBf input)
STEREO ...................................................... 68 dB (65 dBf input)
Stereo separation (1 kHz) .......................................................... 40 dB
Selectivity ( 400 kHz) (VR-507).................................................70 dB
(KRF-V7050D) ....................................... 50 dB
BASS ................................................................ 10 dB (at 70 Hz)
TREBLE .......................................................... 10 dB (at 10 kHz)
Frequency response ................. (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
For other countries
10 kHz step ................................. 530 kHz ~ 1,700 kHz (VR-507)
10 kHz step ........................530 kHz ~ 1,610 kHz (KRF-V7050D)
9 kHz step ..........................531 kHz ~ 1,602 kHz (KRF-V7050D)
Usable sensitivity ................................................. 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input)........................... 50 dB
AUDIO section (KRF-V7050D)
Effective power output during STEREO operation
1kHz,10% T.H.D.,at 8 Ω ........................................... 140 W + 140 W
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at
8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)
GENERAL
Power consumption VR-507 ...................................................... 2.6 A
KRF-V7050D ............................................ 270W
Maximum power consumption (For other countries) ......... 1000 W
AC outlet
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................. 140 W + 140 W
CENTER (1kHz, 10% T.H.D. at 8 Ω one channel driven)
............................................................................................. 140 W
SURROUND (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................. 140 W + 140 W
Total harmonic distortion ...........................0.05% (1 kHz, 50W, 8 Ω)
Frequency response
SWITCHED
VR-507 ..................... (total 150 W, 1.25 A max.)
KRF-V7050D.............. (total 90 W, 1.25 A max.)
Dimensions .....................................................W : 440 mm (17-5/16")
H : 144 mm (5-11/16")
D : 399 mm(15-11/16")
Weight (Net)
VR-507 ................................................................ 8.8 kg (19.40 lb)
KRF-V7050D ...................................................... 8.6 kg (19.00 lb)
CD ............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM)........................................................................ 73 dB
CD ......................................................................................... 91 dB
Input sensitivity / impedance
PHONO (MM)......................................................... 2.5 mV / 27 kΩ
CD ......................................................................... 200 mV / 47 kΩ
MONITOR IN ........................................................ 200 mV / 47 kΩ
DVD/6CH INPUT .................................................. 200 mV / 10 kΩ
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 kΩ
MONITOR OUT ...................................................... 200 mV / 1 kΩ
PRE OUT (SUBWOOFER)...................................... 1.5 V / 2.2 kΩ
Tone control
BASS ................................................................ 10 dB (at 70 Hz)
TREBLE .......................................................... 10 dB (at 10 kHz)
Notes
A
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model __________________ Serial Number ________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
|