Kenwood Car Stereo System DP SE9 User Manual

FM/AM RECEIVER

R-SE9T

CD PLAYER

DP-SE9

CASSETTE TAPE DECK

X-SE9

INSTRUCTION MANUAL

KENWOOD CORPORATION

COMPACT

DIGITAL AUDIO

B60-3715-00 JA (T) WS

98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution : Read the pages marked

carefully to ensure safe operation.

Before applying power

R-SE9 T/ DP-SE9 / X-SE9 (En)

Contents

Preparation section

Application section

Before applying power ................................................. 2

Safety precautions .............................................................. 2

IMPORTANT SAFEGUARDS ............................................... 4

The High grade Micro Component Series ...................... 6

About the Instruction Manual ........................................... 6

Special features .................................................................. 7

System Composition and Installation......................... 8

System connection ........................................................ 9

Antenna connection............................................................ 9

Connection of audio cord ................................................ 10

Connection of speakers ................................................... 12

Connection of system control cord ................................ 13

Power Cord Connection ................................................... 13

Playback of CD ............................................................. 31

Listening in the desired sequence

(program playback) ......................................................... 31

Repeated playback ........................................................... 33

Listening to an unexpected title sequence

(random playback)........................................................... 34

Convenient CD recording............................................ 35

Selecting the optimum recording method ........................... 35

Giving preference to the tape length

over the title sequence

(time edit recording) ....................................................... 36

Recording only desired titles

(ONE TOUCH EDIT......single title recording) ....................... 37

One-touch recording of an entire CD

(ONE TOUCH EDIT......recording of all titles) ....................... 38

Controls and indicators ............................................... 14

Main Unit ............................................................................ 14

Remote control Unit .......................................................... 16

R.D.S. (Radio Data System)......................................... 39

Searching for a desired program type

(PTY search) ..................................................................... 40

To be able to listen to the desired information

at any time

Operation of remote control unit............................... 17

(EON reservation) ............................................................ 42

Compensating for the bass and treble tones .......... 43

Clock adjustment ......................................................... 44

Basic section

Timer operation ............................................................ 45

Operate easy To use Timer (O.T.T.) ................................. 45

Sleep timer ......................................................................... 45

Timer programming ........................................................... 46

Hearing sound............................................................... 18

Basic use ............................................................................ 18

Playback of CD................................................................... 20

Playback of tape ................................................................ 22

Receiving broadcast station ........................................... 26

Collective presetting of stations (auto preset) ............ 27

One-by-one presetting (manual preset) ........................ 27

Recording ...................................................................... 28

Recording............................................................................ 28

Knowledge section

Important items............................................................. 49

Handling of discs and tapes ............................................ 49

Maintenance ...................................................................... 50

Reference ............................................................................ 51

In case of difficulty ...................................................... 52

Specifications ............................................................... 55

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution : Read this page carefully to ensure safe

operation.

Before applying power

R-SE9 T/ DP-SE9 / X-SE9 (En)

IMPORTANT SAFEGUARDS

Ple as e re ad all of the s afe ty and ope rating ins tructions

be fore ope rating this appliance. Adhere to all warnings

on the appliance and in the instruction manual. Follow allthe

safety and operating instructions. The s e s afe ty and

ope rating ins tructions s hould be re taine d for future

re fe re nce .

1. Po w e r s o u rce s – The appliance should be connected

to a power supply only of the type described in the

instruction manualoras marked on the appliance. Ifyou

are not sure of the type of power supply to your home,

consult your appliance dealer or local power company.

For appliances intended to operate from battery power,

or other sources, refer to the instruction manual.

7. He a t – The appliance s hould be s ituate d aw ay

from he at source s such as radiators, he at re giste rs,

s tove s , or othe r appliance s (including am plifie rs )

that produce he at.

8. Ele ct ric s h o ck – Care s hould be take n s o that

obje cts do not fall and liquid is not s pille d into the

e nclos ure through ope nings . If a m e tal obje cts ,

s uch as a hair pin or a ne e dle , com e s into contact

w ith the ins ide of this appliance , a dange rous

e le ctric s hock m ay re s ult. For fam ilie s w ith

childre n, ne ve r pe rm it childre n to put anything,

e s pe cially m e tal, ins ide this appliance .

2. Po w e r-co rd p ro t e ct io n – Pow e r-s upply cords

s hould be route d s o that the y are not like ly to be

w alke d on or pinche d by ite m s place d upon or

agains t the m , paying particular atte ntion to cords

at plugs , conve nie nce re ce ptacle s , and the point

w he re the y e xit from the appliance .

9. En clo su re re m o va l – Ne ve r re m ove the e nclosure .

If the inte rnal parts are touche d accide ntally, a

s e rious e le ctric s hock m ight occur.

^3.CAUTION – Po la riza t io n – This appliance may

be equipped with a polarized alternating-current line

plug (a plug having one blade wider than the other). This

plug will fit into the power outlet only one way. This is

a safety feature. If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the

polarized plug.

10. Ma g n e t ic fie ld s – Ke e p the appliance aw ay from

sources of magnetic fields such as TV sets, speaker

s ys te m s , radios , m otorize d toys or m agne tize d

obje cts .

11. Cle a n in g – Unplug this appliance from the w all

outle t be fore cle aning. Do not us e volatile s olve nts

s uch as alcohol, paint thinne r, gas oline , or be nzine ,

e tc. to cle an the cabine t. Us e a cle an dry cloth.

4. Ve n t ila t io n – Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation

of the appliance and to protect it from overheating, and

these openings must not be blocked or covered. The

appliance should be situated so that its location or

position does not interfere with its proper ventilation.

To maintain good ventilation, do not put records or a

table-cloth on the appliance. Place the appliance at least

10 cm away from the walls.

12. Accessories –Do not place this appliance on an unstable

cart, stand, tripod, bracket, or table. The appliance may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand,

tripod, bracke t, or table re com m e nde d by the

manufacturer, or sold with the appliance. Any mounting

of the appliance should follow the manufacturer’s

instructions, and should use a mounting accessory

recommended by the manufacturer. An appliance and

cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces maycause

the appliance and cart combination to overturn.

Do not use the appliance on a bed, sofa, rug or similar

surface that may block the ventilation openings. This

appliance should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been

adhered to.

5. Wa t e r a n d m o is t u re – The appliance s hould not

be us e d ne ar w ate r - for e xam ple , ne ar a bathtub,

w as hbow l, kitche n s ink, laundry tub, in a w e t

bas e m e nt, or ne ar a s w im m ing pool, e tc.

13. Lightning – For added protection for this appliance

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This willprevent damage to the appliance due to lightning

and power-line surges.

6. Te m p e ra t u re – The appliance m ay not function

prope rly if us e d at e xtre m e ly low , or fre e zing

te m pe rature s . The ide al am bie nt te m pe rature is

above +5°C (41°F).

14. Ab n o rm a l s m e ll – If an abnorm al s m e ll or s m oke

is de te cte d, im m e diate ly turn the pow e r OFF and

unplug the appliance from the wall outlet. Contact

your de ale r or ne are s t s e rvice ce nte r.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution : Read this page carefully to ensure safe

operation.

Before applying power

R-SE9 T/ DP-SE9 / X-SE9 (En)

15. Da m a g e re q u irin g s e rvice – The appliance s hould

be s e rvice d by qualifie d s e rvice pe rs onne l w he n:

A. The pow e r-s upply cord or the plug has be e n

dam age d.

B. Obje cts have falle n, or liquid has be e n s pille d into

the appliance .

C. The appliance has be e n e xpos e d to rain or w ate r.

D. The appliance doe s not appe ar to ope rate norm ally

by following the instruction manual. Adjust only those

controls that are covered by the instruction manual as

an improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the appliance to its normal

operation.

18. Po w e r lin e s – An outside antenna system should not

be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken

to keep from touching such power lines or circuits as

contact with them might be fatal.

19. AC o u t le t s – Do n o t c o n n e c t o t h e r a u d io

e quipm e nt w ith a pow e r cons um ption large r than

that s pe cifie d to the AC outle t on the re ar pane l.

Ne ve r conne ct othe r e le ctrical appliance s , s uch

as an iron or toas te r, to it to pre ve nt fire or e le ctric

s hock.

E. The appliance has be e n droppe d, or the e nclos ure

dam age d.

F. The appliance exhibits a marked change in performance.

20. Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

16. S e rvicin g

–

The us e r s hould not atte m pt to

s e rvice the appliance be yond that de s cribe d in the

ins truction m anual. All othe r s e rvicing s hould be

re fe rre d to qualifie d s e rvice pe rs onne l.

21. At t a ch m e n t – Do not us e attachm e nts not

recommended by the appliance manufacturer as they

may cause hazards.

17. Ou t d o o r a n t e n n a g ro u n d in g – If an outs ide

ante nna is conne cte d to the appliance , be s ure the

ante nna s ys te m is grounde d s o as to provide

s om e prote ction agains t voltage s urge s and built

up s tatic charge s . Article 810 of the National

22. Replacem ent parts – When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or

have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

Ele ctrical Code

ANSI/NFPA 70, provide s

inform ation w ith re s pe ct to prope r grounding of

the m as t and s upporting s tructure , grounding of

the le ad-in w ire to an ante nna dis charge unit, s ize

of grounding conductors , location of ante nna

d is c h a rg e u n it , c o n n e c t io n t o g ro u n d in g

e le ctrode s , and re quire m e nts for the grounding

e le ctrode . Se e Figure .

23. Safety check – Upon completion of any service or

repairs to this appliance, ask the service technician to

perform safety checks to determine that the appliance

is in proper operating condition.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

GROUND

CLAMPS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

Notes:

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

1. Item 3 is not required except for grounded or polarized

equipment.

2. Item 17 and 18 are not required except for units provided with

antenna terminals.

GROUND CLAMP

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

3. Item 17 complies with UL in the U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before applying power

R-SE9 T/ DP-SE9 / X-SE9 (En)

The High grade Micro Component Series

Thank you for purchasing the High grade Micro com ponent series.

This system is available in various configuration according to your preferences.

The system configuration is up to you, but as the follow ing convenient system operations can be

executed by connecting the various units to the system control, the respective units should be pur-

chased as required.

Remote Control

The remote control supplied with the receiver can be used for basic operation of the source units (CD

player, cassette deck, MD recorder).

Automatic Operation

When playback is started on the playback source unit, the input selector on the amp tuner will

automatically be set to input for that source unit. Also, when source input is selected on the amp tuner,

playback of the input source unit will be started automatically.

Synchronized Recording

With recording from CD or MD, it is possible to start synchronized recording by the recording unit (MD

recorder or cassette deck). (Recording from one MD recorder onto another one is not possible.)

There are also other convenient functions like one-touch edit recording for CD and MD etc.

Timer Operation

The clock function of the receiver can be used for timer playback and timer recording of source equipment

(CD player, cassette deck, MD recorder).

High grade Micro Component Series components

R-SE9T (receiver)

DP-SE9 (CD player)

X-SE9 (cassette deck)

DM-SE9 (MD recorder)

7 There are 2 lines in the High grade Micro Com ponent Series, SE7 and SE9T, you can use optional

com ponents from either series.

About the Instruction Manual

While som e m odels of the High grade Micro com ponent series have an instruction m anual explaining

the system operation for R-SE9T (receiver), DP-SE9 (CD player), and X-SE9 (cassette deck), other m od-

els have only an operation m anual for that m odel itself. This is done so that the system operation can

be done easily even w hen optional equipm ent is purchased at a later date. Please read the required

sections according to the com ponents you purchased.

With the High grade Micro com ponent series, the system explanations show only the connection m ethod

for the DM-SE9 (MD recorder). Please refer to the instruction m anual enclosed w ith the DM-SE9 for the

detailed operation.

Model nam e

(nam e of the purchased com ponent)

Enclosed instruction m anual

(explained m odels)

Basic system (R-SE9T, DP-SE9)

Cassette deck (X-SE9)

System instruction manual (R-SE9T, DP-SE9, X-SE9)

Individual instruction m anual (X-SE9)

MD recorder (DM-SE9)

Individual instruction m anual (DM-SE9)

Download from Www.Somanuals.com. All Manuals Search And Download.

Before applying power

R-SE9 T/ DP-SE9 / X-SE9 (En)

Special features

7 Amplifier unit that accomplishes high grade sound quality and low distortion

¶ New “TRAITRA” transistor

The newly developed “TRAITRA” transistor with extremely superior temperature characteristics is used in this

amplifier’s amplification circuit. Through the use of this transistor, distortion generated because of temperature

change is kept to a minimum resulting in “pure” sound reproduction.

7 CD player unit that accomplishes improved sound quality and stability

¶ Newly developed D.R.I.V.E. IC installed

A D.R.I.V.E. (Dynamic Resolution Incentive Vector Enhancement) IC that rapidly improves distortion at minute

levels is installed in the CD player in order to extract the maximum performance possible from the CD.

¶ Adoption of a 24 bit new D/A convertor

Through adoption of a 24 bit internally operated high performance New D/A convertor, a smoother sound is

reproduced.

7 Convenient easy to use operation

¶ Easy Operation

When the High grade Micro component series is connected to the system control, input switching with the

input selector (TAPE, TUNER, CD, MD) of the R-SE9T will start playback by the selected unit. Reversely, when

playback is started from a unit, the input will be switched automatically to this unit.

¶ CD TEXT compatibility

Disc title and track names recorded on the CD appear in the display of the MD player (DM-SE9: sold separately).

¶ Convenient Edit Recording

ﬂ

Time edit recording: Recording so that no track is interrupted within the specified time.

One-touch edit recording: When listening to a CD, either a single track or the entire CD can be recorded on tape

by one-touch operation.

¶ Simple Timer Operation

The wake-up timer and the sleep timer can be set easily.

A daily program timer also can be reserved.

¶ R.D.S. (Radio Data System)

The RDS data included in FM broadcasts can be used to search for the intended broadcasting contents and for

automatic reception from standby.

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immedi-

ately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or

company receiving the unit) can file a claim against the carrier for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Accessories

Accessories using with R-SE9T

Accessories using with DP-SE9

AM loop antenna (1)

Loop antenna stand (1)

FM indoor antenna (1)

Rem ote control unit (1)

Batteries (R6/ AA) (2)

Audio cord (1)

System control cord (1)

Accessories supplied with X-SE9

Audio cord (2)

System control cord (1)

Download from Www.Somanuals.com. All Manuals Search And Download.

⁸System Composition and Installation

System connection

R-SE9 T/ DP-SE9 / X-SE9 (En)

The High grade Micro com ponent series perm its various com binations according to the purchased

com ponents. As the installation differs according to the com ponents you purchase, please install cor-

rectly under reference to the illustrations.

Basic System (R-SE9T, DP-SE9)

Seen from the front

Installation m ethod

R-SE9T

DP-SE9

Basic System + Cassette Deck (R-SE9T, DP-SE9, X-SE9)

Seen from the front

Installation m ethod

R-SE9T

X-SE9

(optional)

DP-SE9

Basic System + MD recorder (R-SE9T, DP-SE9, DM-SE9)

Seen from the front

Installation m ethod

R-SE9T

DM-SE9

(optional)

DP-SE9

Full System (R-SE9T, DP-SE9, DM-SE9 X-SE9)

Seen from the front

Installation m ethod

DP-SE9

R-SE9T

X-SE9

(optional)

DM-SE9

(optional)

When the pow er of the R-SE9T (receiver) is sw itched on, the heat generated on the inside is

radiated to the outside. Alw ays install the R-SE9T on top, and don't place any objects im pair-

ing heat radiation onto the top of the unit.

CAUTION

Download from Www.Somanuals.com. All Manuals Search And Download.

System connection

R-SE9 T/ DP-SE9 / X-SE9 (En)

1. Antenna connection

Connect the antenna as show n in the figure.

Do not plug the pow er cord into a w all AC outlet until the connection has been com pleted.

Connection of the Accessory Antenna

FM indoor antenna

AM loop antenna

The accessory antenna is for temporary indoor use only.

For stable signal reception we recommend using an out-

door antenna. Remove the indoor antenna if you connect

one outdoors.

The supplied antenna is for indoor use. Place it as far as

possible from the main system, TV set, speaker cords and

power cord, and set it to a direction which provides the

best reception.

FM indoor

antenna

AM loop

antenna

FM75

1 Locate the position providing good

ANTENNA

reception condition.

GND

2 Fix the antenna.

SPEAKERS

(

)

ANTENNA

FM75

GND

TAPE

REC

SYSTEM

CONTROL

TAPE

PLAY

Incase ofbadreception

AUX

R-SE9T

SUPER

WOOFER

PRE OUT

FM75

Antenna adapter

ANTENNA

(commercially

available)

GND

FM outdoor

antenna

(commercially

available)

FM outdoor antenna

Lead the 75Ω coaxial cable connected to the FM outdoor

antenna into the room and connect it to the FM 75Ω

termimal.

Download from Www.Somanuals.com. All Manuals Search And Download.

System connection

R-SE9 T/ DP-SE9 / X-SE9 (En)

Malfunction of microcomputer

2. Connection of audio cord

If operation is not possible or erro-

neous display appears even though

a ll co n n e ct io n s h a ve b e e n m a d e

properly, reset the m icrocom puter re-

ferring to “In case of difficulty”.

Here, connection of separately sold com ponents

also w ill be explained under consideration of

s ys t e m co n n e ct io n . Ple a s e in s t a ll co rre ct ly

according to the purchased com ponents and

connect the required cords.

Audio cord (Supplied with R-SE9T)

R-SE9T

SPEAKERS

( 6 - 16

)

ANTENNA

GND

FM75

TAPE

REC

SYSTEM

CONTROL

PLAY

TAPE

PLAY

AUX

SUPER

WOOFER

PRE OUT

Audio cord (x2)

(Supplied with

X-SE9)

Optional record player with internal

RIAA equalizer/amp (P-100)

or videodeck (etc.).

[

]

X-SE9 (optional)

REC

PLAY

OUT

SYSTEM

CONTROL

Connection with Optical Fiber Cable

DP-SE9

DM-SE9

This is used for digital connections. Digital trans-

m ission perm its recording w ithout loss of the

high CD sound quality.

DIGITAL IN

OPTICAL

DIGITAL

OUTPUT

OPTICAL

Rem ove the cap and connect an optical fiber

cable.

Remove cap

Optical fiber cable

Download from Www.Somanuals.com. All Manuals Search And Download.

System connection

R-SE9 T/ DP-SE9 / X-SE9 (En)

Caution regarding placement

To m aintain proper ventilation, be sure to leave a

space around the unit (from the largest outer dim en-

sions including projections) equal to, or greater than,

show n below.

Caution for Connection

When connections are to be m ade, m ake sure that

the pow er plug is not plugged into a w all AC outlet.

Connect the equipm ent as show n in the figures.

top panel : 50cm

side panel : 10cm

rear panel : 10cm

Ventilation fan

The ventilation fan runs high-pow er reproduction.

To allow for proper ventilation, do not block the ven-

tilation fan.

DP-SE9

SYSTEM

CONTROL

DIGITAL

OUTPUT

OPTICAL

LINE OUTPUT

Audio cord (x2)

(Supplied with DM-SE9)

DM-SE9 (optional)

DIGITAL IN

OPTICAL

REC

PLAY

OUT

Optical

fiber cable

(Supplied

SYSTEM

CONTROL

with DM-SE9)

1.In case an associated system component is connected, also read the instruction manual of the component.

2.Insert the optical-fiber cable straight into the connector until it clicks.

3.Be sure to attach the protection cap when the connector is not used.

NNootteess

4.Be careful not to bend, coil or bundle the optical fiber cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

System connection

R-SE9 T/ DP-SE9 / X-SE9 (En)

3. Connection of speakers

Connect the speakers as show n in the figure.

Do not plug the pow er cord into a w all AC outlet until the connection has been com pleted.

1 Cord preparation.

Speaker (right)

Speaker (left)

(6-16Ω)

2 Loosen.

SPEAKERS

( 6 - 16

)

3 Insert.

4 Secure.

R-SE9T

SPEAKERS

(

)

Connection of banana plugs

ANTENNA

FM75

GND

TAPE

REC

SYSTEM

CONTROL

TAPE

PLAY

1 Secure.

AUX

SUPER

WOOFER

PRE OUT

2 Insert.

SUPER

WOOFER

PRE OUT

• Sound will not be heard if

the speaker terminal is not

fully secured.

¶ Never short-circuit the + and – speaker cords.

The protection circuit will operate and no sound will

be put out.

¶ If the left and right speaker connections or the + and

– polarity are inverted, the sound will be unnatural

with unclear localization of musical instruments, etc.

Be sure to connect them without mistake.

Super w oofer (SW-500) (optional)

Extremely low frequency sound is played back powerfully.

This can be used with any type of playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

System connection

R-SE9 T/ DP-SE9 / X-SE9 (En)

4. Connection of system control cord

Connect the system control cords and the pow er cords as show n in the figure.

Sys te m control cord

(Supplied with R-SE9T)

R-SE9T

DP-SE9

SPEAKERS

( 6 - 16

)

ANTENNA

FM75

GND

SYSTEM

CONTROL

TAPE

REC

SYSTEM

CONTROL

TAPE

PLAY

To wall

AC outlet

DIGITAL

OUTPUT

OPTICAL

To wall

AC outlet

AUX

SUPER

WOOFER

PRE OUT

LINE OUTPUT

System control cord

(Supplied with X-SE9)

System control

cord (Supplied

with DM-SE9)

DIGITAL IN

OPTICAL

REC

PLAY

OUT

PLAY

OUT

To wall

SYSTEM

CONTROL

AC outlet

SYSTEM

CONTROL

To wall

AC outlet

X-SE9 (optional)

DM-SE9 (optional)

Connection of system control cord

Plugging the connector

Unplugging the connector

Insert the plug straight into the connector until it locks.

While pushing the two sides of connector in, pull it

straight out.

5. Power Cord Connection

Insert the pow er cord plug into a w all AC outlet after all other connections have been com pleted.

1.Be sure to insert allconnection cords securely. Iftheirconnections are imperfect, the sound maynot be produced

or noise may interfere.

2.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet.

If connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may

result.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and indicators

R-SE9 T/ DP-SE9 / X-SE9 (En)

Main Unit

TUNED indicator

Stereo reception indicator

AUTO indicator

MUTE indicator

RDS display

Sleep timer indicator

N.B. indicator

MUTE

AUTO

ST.

TUNED RDS

EON

PTY

TA NEWS INFO

N.B. SLEEP

A.P.S. O.T.T.

kHz MEMO.

MHz PROG.

O.T.T. indicator

* * * * * * ;* *

Memory indicator

Timer Program indicator

A.P.S. indicator

Display

Frequency level display and

Character information display

Receiver R-SE9T

stereo integrated amplifier/tuner

R-SE9T

TRAITR

EX.BASS

multi control

volume control

mode

N.B.

band

auto/mono

enter

phones

on/standby

∞

down

Cassete deck X-SE9 (optional)

^{stereo auto reverse cassette deck}X-SE9

- front loading mechanism -

”

rev. mode

Dolby NR

CRLS

on/standby

CD player DP-SE9

compact disc player DP-SE9

time

space

repeat

24 bit fine D.R.I.V.E.

D.R.I.V.E. with 24 bit D/A conversion

on/standby

Indicator of A and B (EDIT mode)

Display

RANDOM indicator

TOTAL indicator

SPACE indicator

REPEAT indicator

Program mode

TRACK NO. REPEAT

EDIT A B

RANDOM

TOTAL SPACE

PGM

STANDBY

indicator

Track number display

11 12 13 14 15

8 8 - 8 8 : 8 8

Time display

STANDBY indicator

Playback/Pause indicator

Track number display

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and indicators

R-SE9 T/ DP-SE9 / X-SE9 (En)

Receiver R-SE9T

1 N.B. key

8 EX. BASS indicator

When the power is ON : Used for bass compensation.

This lights at the time of EX. BASS mode.

When the power is OFF: Used for timer setting.

9 EX. BASS key

2 “enter” key

¶r

When the power is ON : Switches EX. BASS mode

Used for time setting, timer setting, presetting RDS

ON/OFF.

stations, storing radio stations etc.

3 “auto/ m ono” key

When the power is OFF: Switches A.P.S. (auto power

save) ON/OFF.

¶r

When the power is ON : The tuning mode is switched.

0 “m ulti control" knob

When the power is OFF: Used for clock setting.

• This selects the input source. When TAPE, CD, or MD

is selected and a tape or disc already has been set,

playback starts automatically.

4 “band” key

§i

When the power is ON : Reception band switching.

• It is also used for timer reservation, clock setting and

station tuning.

• This is used for bass and treble compensation.

When the power is OFF: Used for timer reservation.

5 “on/ standby” key

The power is switched ON and OFF (standby). At the

time of system connection, the power is switched ON

and OFF for the entire system.

! “m ode” key

§ei

When the power is ON : Used for station tuning. This

is used for bass and treble

compensation.

When the power is OFF: Used for timer reservation

(Program ON/OFF).

6 “volum e control” knob

This is used to adjust the volume.

7 Rem ote control sensor

This is used with the R-SE9T system remote control

[RC-SE9(E)].

@ “phones” jack

(

Headphones with a stereo mini plug (optional) can be

connected.

Cassete deck X-SE9

1 Tape tray

™

7 Pause (8) key/ indicator

8 Record (¶) key/ indicator

•

This houses the cassette tape.

2 “on/ standby” key/ Standby indicator

The power is switched ON and OFF (standby). This is

not used in case of system connection.

Recording is started. When this switch is pressed

during recording, an unrecorded (blank) portion of about

4 sec is produced and then the tape stops.

3 Dolby NR key/ indicators

9 Fast forw ard and rew ind (1 ¡) keys £

Dolby noise reduction ON/OFF switching is executed.

4 Playback keys (2 3)/Operation indicator ™

During stop and pause: the tape direction lights red.

During playbackand recording:the tape direction lights

green.

0 “rev. m ode” key/ indicator

The reverse mode of the deck (both sides, one side) is

switched.

! CRLS key/ indicator

The recording level is set automatically according to the

During fast forward and rewind: the tape direction

flashes green.

sound source being recorded.

5 Open/ Close key (0)

™

This opens the tape tray for tape insertion and removal.

6 Stop (7) key

CD player DP-SE9

1 Disc tray

One disc can be stored.

2 “tim e” key

The CD time display is switched.

3 “on/ standby” key

The power is switched ON and OFF (standby). This is

not used with system connection.

4 “space” key

)

5 “repeat” key

‹

)

This is used for repeated playback of a CD.

6 Rem ote control sensor

This is not used with system connection.

7 Open/ Close key (0)

The disc tray is opened and closed.

8 Stop (7) key

9 Playback/ Pause key (6)

0 Fast forw ard, rew ind (1 ¡) key

! Skip (4 ¢) key

)

During program playback, a silent part of several sec-

onds is produced between tracks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and indicators

R-SE9 T/ DP-SE9 / X-SE9 (En)

Remote control Unit [RC-SE9(E)]

When the system control cord is connected, this rem ote control can be used to operate the entire

system .

The keys on the rem ote control unit w ith the sam e nam es as on the m ain unit have the sam e function

as the keys on the m ain unit.

6 BAND key

This is used to switch the tuner reception bands.

7 Keys related to RDS

TAPE

SLEEP

RDS'DISPLAY key

The display contents are switched during reception

of RDS broadcasts.

PTY (Program Type) key

This is used to specify the program type when

searching for a station.

TA/ NEWS/ INFO key

Used for automatic reception of transmissions of a

DISPLAY

RANDOM

CLEAR

P.MODE

EDIT

certain content.

PTY SEARCH

+10

O.T.E.

8 INPUT key

This key selects the input source. When TAPE, CD, or

MD is selected and a tape or disc already has been set,

playback starts automatically.

P.CALL

TUNER

BAND

9 N.B. key

This is used for bass compensation.

0 SLEEP key

Use to set the sleep timer.

! on/ standby key

(

RDS

TA/

PTY

DISPLAY NEWS/INFO.

VOLUME

CONTROL

INPUT

N.B.

MUTE

The power for the receiver is switched ON and OFF

(standby). At the time of system connection, the power

is switched ON and OFF for the entire system.

)

REMOTE CONTROL UNIT

RC-SE9 (E)

@ DISPLAY key

Switches the display on the AMP/TUNER (R-SE9T)

(between the clock display and the input display).

1 Cassette deck operation keys

™

These keys are used to operate the cassette deck

(X-SE9).

2 Num eric keys

# RANDOM key

Selects CD or MD tracks randomly for playback.

$ CLEAR key

The contents of the CD program playback are cleared

title by title from the end.

% P.MODE keys

Used to program the CD playback sequence.

^ EDIT key

Used for CD edit recording (time edit recording).

& CD operation keys

These keys are used to operate the CD player.

* MD operation keys

›

¡¶

These keys can be used as numeric keys when CD

or MD is selected as input. When TUNER is se-

lected as input, preset stations can be called.

⁄

ﬂ

3 PTY SEARCH/ +10 key

‚

This is used to specify the program type and to search

for a station.

4 O.T.E. key

ﬁ

When this key is pressed during CD or MD playback,

only the track being played at that time will be recorded

on tape. When this key is pressed during stop, the CD

or MD selected at that time will be recorded on tape

from the first track onward.

These keys are used to operate the MD recorder

(DM-SE9).

5 4 ¢key

¡§

( VOLUME CONTROL keys

This has the same function as the volum e control knob

on the main unit. However, the AI VOLUME function

does not operate.

(Skip/ Preset call)

When TUNER is selected:

This is used as preset call key.

When CD or MD is selected:

This is used as skip key.

) MUTE key

(

This is used to mute the sound temporarily.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of remote control unit

R-SE9 T/ DP-SE9 / X-SE9 (En)

Loading batteries

2 Insert batteries.

3 Close the cover.

1 Rem ove the cover.

÷ Insert two R6 (“AA”-size) batteries following the polarity indications.

Operating range (approx.)

Operation

Re m ote

sensor

After plugging the pow er cord of this unit, press

the on/ standby key of the rem ote control unit to

turn the pow er of the system ON. When the

pow er is turned ON, press the key of the function

to be operated.

6 m

30°

Model: RC-SE9(E)

Infrared ray system

÷ When pressing more than one remote control keys

successively, press the keys securely by leaving an

interval of 1 second or more between keys.

1.The provided batteries are intended for use in operation checking, and their service life may be short.

2.When the remote controllable distance becomes short, replace both of the batteries with new ones.

3.If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote

sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

Basic use

Bass com pensation

Listening through

headphones

Muting the sound tem porarily

Press the “on/ standby” key of

the receiver.

1 . Switching the power ON (OFF).

÷ The entire system can be switched

ON and OFF. The on/ standby

key on the remote control has the

same function.

÷ The display part becomes dark

when the power is switched OFF.

(DIMMER function)

When the “on/ standby” key is

pressed w hile the pow er is ON,

the pow er w ill be sw itched

OFF.

on/standby

Turn the “m ulti control” knob

2 . Selecting the desired output.

multi control

1 TUNER

2 CD

3 TAPE

)

™

For MD, refer to the instruction

m anualfor the MDrecorder (DM-

SE9).

4 MD

5 AUX

÷ When CD, TAPE or MD is selected,

playback will start when a disc or a

tape already has been inserted.

volume

control

3 . Volume adjustment.

÷ Quick turning produces a larger

change amount. (Dynamic rotary

volume control function)

÷ The display shows a reference

value.

∞

down

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

Muting the sound temporarily(Remote control unit only)

Listening through headphones

MUTE

Blinks

R-SE9T

1 Insert the headphone plug into the phones jack.

phones

MUTE

Rem ote control unit

÷ Press again to resume the original volume.

÷ This is also cancelled when the volume is adjusted.

Bass compensation (N.B.: Natural Bass circuit)

N.B.

R-SE9T

Lights

÷ Headphones with a stereo mini plug can be connected.

÷ The sounds from all speakers are cut off.

2 Adjust the volum e.

The indication changes each tim e this key is

pressed.

volume

control

1NB ON... The low range are compensated

according to the volume (effective

for low volumes).

2NB OFF... In the ON setting, the EX. BASS

function is turned off.

∞

down

Setting to OFF returns the levels

of the low and high range

frequencies to the levels set with

the multi control knob.

AUTO POWER SAVE function

When m ore than 30 m inutes have elapsed after the

unit in the pow er-ON condition w as left untouched

w ithout perform ing recording or playback or after

the MUTE key of the rem ote control w as pressed,

this function sw itches the pow er off autom atically.

This function can be activated or deactivated by the

follow ing operation.

Press w hen the pow er is OFF.

When CD has been selected.

R-SE9T

EX. BASS

÷ The A.P.S. indicator lights up.

Each press sw itches the m odes as follow s.

1APS ON..... Auto power save is used.

2APS OFF.... Auto power save is not used.

÷ In the TUNER mode, this feature functions only when

the volume is set to 0 or when the muting is set to ON.

Volume display R-SE9T

Power Switch Standby

When this system is in standby condition (time display

for the R-SE9T, STANDBY indication for DP-SE9, standby

indicator lit for X-SE9), a slight current flows for memory

protection.

VOL 2)

At this time also, the remote control can be used for

power ON.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

Playback of CD

To fast forw ard and backw ard

To stop PLAYBACK

Playback from

desired track

Skipping tracks

1 . Load a disc.

The label must be on top.

1 Open the tray.

2 Place a disc.

3 Close the tray.

The tray opens w hen the key is

pressed and closes w hen the key

is pressed again.

2 . Start playback.

When the pow er is ON and a disc has been set in ad-

vance to the CD player, playback w ill start just by set-

ting the input selection to CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

Skipping tracks

To fast forward and backward

To backw ard

To forw ard

To skip backw ard

To skip forw ard

÷ The track in the direction of the button pressed is

skipped, and the selected track will be played from the

beginning.

÷ Playback starts from the position where the key is

released.

÷ When the 4 key is pressed once during playback, the

track being played will be played from the beginning.

÷ To skip further to the previous track, press the 4key

quickly.

To pause playback

Playback from desired track

Select the desired track No.

÷ Each press pauses and plays the CD alternately.

Rem ote control unit

To stop playback

PTY SEARCH

+1 0

Press the numeric keys as shown below....

To enter track No. 23 : 003

To select track No. 40 : 0000)

Time display on CD player

Each press of the “tim e” key changes the displayed

contents.

time

÷ Do not touch the playback side of disc.

Elapsed time of track being

played

Remaining time of track being

played

1: 2 3

The recorded track Nos. are shown.

- 2: 3 7

TOTAL

TRACK NO.

Elapsed time of entire disc

2 3: 4 5

TOTAL

0 1

1 : 5 0

Remaining time on entire disc

-3 6: 1 5

DP-SE9

÷ In edit mode and in random mode, display is made only

for the track being played.

÷ After a few seconds, play starts from track No.1.

About the CD TEXT function

When a CD with text information (Titles, Artist name,

etc.) is loaded and the optional MD player (DM-SE9) is

connected, the disc title and track names appear in the

display of the MD player. See the operating instructions

for DM-SE9 for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

Playback of tape

Selection of DOLBY NR Selection of reverse m ode

To w ind tape at high speed

To stop playback

1 . Load a cassette tape.

Side where tape

is exposed

Top side

1 Open the tray.

2 Insert a tape and close the

tray.

Reverse side

2 . Start playback.

Press the key for the running

direction to be played.

Playback of the

reverse side

Playback of the

top side

When the pow er is ON and a cassette has been set in

advance to the cassette deck, playback w ill start just

by setting the input selection to TAPE.

The tape direction lights

green.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

To pause the tape

To stop playback

÷ Press the 2 or 3 key to restart playback.

÷ The tape direction lights red.

Selection of DOLBY NR (Noise Reduction)

The Dolby NR system m inim izes the hiss noise

heard w hen playing tape.

To wind tape at high speed

To fast w ind in

direction |

To fast w ind in

direction \

Dolby NR

÷ Press the 7 key to stop fast winding.

Selection of reverse mode

rev. mode

∏

Each press sw itches the m odes as follow s.

1 “B” is lit ... Dolby B NR is used.

2 “C” is lit ... Dolby C NR is used.

3 “B” and “C” not lit ... Dolby NR is not used.

Each press sw itches the m odes as follow s.

1“””lit.... Both sides are played.

(The tape stops after recording

onto both sides.)

÷ Select the Dolby NR mode according to the recording

condition of the tape.

2Goes off.. Only one side is played back (re-

corded), and then the tape stops.

Transport direction indicators

The 2 and 3 indicators indicate the current direc-

tion in w hich the tape advances w hen playback or

recording is started autom atically by the easy op-

eration function, etc. This direction is the direction

stored in m em ory w hen the tape w as last stopped.

(To change the direction, press the key for the de-

sired playback direction, and then press the 7 key.)

÷ Set the tape correctly as shown in the figure. Wrong tape

setting can cause trouble.

÷ Normal (TYPE I), high (TYPE II), or metal (TYPE IV) tape

selection is set automatically.

Transport direction indicators

÷ Remove tape slack before loading.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

DPSS

DPSS (Direct Program Search System ) detects an unrecorded part of 4 seconds or m ore as the interval

betw een tracks and perm its easy operation of cassette tape like a CD.

Skip search

Plays the desired m usic program from the beginning by skipping program s until you reach the desired

program .

Up to 16 program s can be skipped.

During playback of top side (while 3 is lit)

During playback of reverse side (while 2 is lit)

To play the next program : Press once.

To play the 4th program

To play the next program : Press once.

To play the 4th program

after the current program : Press 4 tim es.

To return to the beginning

of the current program

To play the 4th program

To return to the beginning

of the current program

To play the 4th program

: Press once.

before the current program : Press 5 tim es.

Listening with fast forward for unrecorded portions (dash & play)

Plays m usic program s repeatedly by skipping non-recorded spaces of m ore than 10 seconds.

Main unit only

÷ The operation changes in reverse mode.

1“””lit.... The two tape sides are played 8

Press sim ultaneously.

times, afterwhich playbackstops.

2Goes off.. A tape side is played 8 times, after

which playback stops.

÷ When the 7 key is pressed, playback stops and the

dash & play is canceled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

One-program repeat playback

Plays a single m usic program repeatedly up to 16 tim es.

Press during playback.

During playbackoftop

side (while 3 is lit)

During playbackof

reverse side (while

2 is lit)

÷ The program being played will be repeated 16 times,

after which normal playback resumes.

÷ When the 7 key is pressed, playback stops and the one-

program repeat is canceled.

Rewind playback

Rew inds tape to the beginning and restarts playback from there.

Main unit only

During playback of top side (while 3 is lit) During playback of reverse side (while 2 is lit)

Press sim ultaneously. Press sim ultaneously.

The DPSS may not function normally with the following kinds of tape.

÷ Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes.

÷ Tapes containing pianissimo sections, such as classical music tape.

÷ Tapes in which large noise is recorded in blanks between programs.

÷ Tapes containing blanks between programs that are shorter than 4 seconds.

÷ Tapes recorded at low level.

NNootteess

÷ Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of

previous program).

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

Receiving broadcast station

It is also possible to receive them by one-touch operations by storing up to 40 stations in the preset

m em ory.

Collective presetting of stations (auto preset)

One-by-one presetting (m anual preset)

Preset call

band

1 . Select the broadcast band.

Each press alternates the band.

1FM

2AM

2 . Select a station.

When no stations have been m em orized

To decrease

frequency

To increase

frequency

1 Press the “m ode” key to select

the TUNING m ode.

1 SELECTOR m ode

2 TUNING m ode

3 BASS m ode

multi control

mode

“TUNING” will appear on the dis-

play for approximately 5 seconds.

4 TREBLE m ode

2 While “TUNING” is displayed, select a station with the control knob.

Turn the “m ulti

control” knob

Auto tuning

: Each tim e the knob is turned, the next

broadcast station w ill be tuned in.

Manual tuning : Repeatedly turn until a station is tuned in.

Rem ote control unit

P.CALL

When stations have been m em orized (preset call)

Every time the key is pressed, the preset stations are switched over as

follows.

Press ¢for the order of 1=2=3 ... 38=39=40=1...

Press 4for the order of 40=39=38 ... 3=2=1=40...

Select a station

Download from Www.Somanuals.com. All Manuals Search And Download.

Hearing sound

R-SE9 T/ DP-SE9 / X-SE9 (En)

÷ Up to 30 stations can be memorized.

Collective presetting of stations (auto preset)

1 Receive a FM broadcast.

÷ For use of the RDS function, stations must be memo-

rized by RDS auto presetting.

÷ RDS stations are given priority during auto presetting. If

there is memory left after presetting, the receiver contin-

ues presetting regular FM stations.

2 Keep the "enter" key depressed (for 2 sec or

enter

m ore).

During recording, the indica-

tor “A MEMO” flashes.

AUTO

A MEMO

One-by-one presetting (manual preset)

÷ For memorizing of stations other than RDS stations (FM,

AM), memorize the stations according to chapter “One-

by-one presetting (manual preset)”.

1 Press the “enter” key during reception.

enter

Presetting is cancelled w hen no

operation is executed for 5 sec-

onds or m ore.

“MEMO.” lights (for approx. 5 sec.)

AUTO

ST.

TUNED

2 Select one of the preset numbers from 1 to 40.

MEMO.

MHz

)- 89.))

Presetting is cancelled w hen

no operation is executed for 5

seconds or m ore.

multi control

Goes off

AUTO

ST.

TUNED

3 Press the “enter” key again.

MHz

)3 89.))

enter

÷ Repeat steps 123 to preset other stations.

÷ If severalstations are preset under the same number, the

previous memory is replaced with the latest memory

contents.

R-SE9T

Select the tuning mode.

AUTO

auto/mono

Each press alternates the m ode.

MHz

FM 88.))

1“AUTO” lit (Auto tuning)

2“AUTO” n o t lit (Ma n u a l

tuning)

“TUNING” appears (for approx. 5 sec.)

R-SE9T

Use the m anual tuning m ode w hen reception is

noisy due to w eak reception. (In the m anual m ode,

stereo broadcasts are received in m onaural.)

TUNING

Lights during stereo reception

Frequency display

R-SE9T

÷ Normally, use the AUTO (Auto tuning) mode.

AUTO

ST.

TUNED

About display change during tuner reception

The display w ill change each tim e the DISPLAY

key is pressed.

MHz

FM 89.))

The “TUNED” indicator lights

1Reception band/ Frequency

2Preset num ber/ Frequency

3Clock

when a station is received.

÷ When a key is held depressed, preset stations will be

skipped at an interval of about 0.5 second.

÷ Preset calls also can be made by numerical input via the

numeric keys on the remote control. When the key for

the tens digit has been pressed erroneously at the time

of input, press the +10 key several times to return to the

original display and then enter the number again.

The display w ill change each tim e the RDS

DISPLAY key is pressed.

PS (Program Service Name)Display

2Reception band/ Frequency

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

Recording

Note that this cassette deck cannot record onto Metal

tapes.

NNoottee

1 . Load a tape in deck.

1 Open the tray of the cassette deck.

2 Insert a tape.

Top side

3 Close the tray.

Reverse

side

÷Differentiation between normal (TYPE I) and high

(TYPE II) tape is set automatically.

÷Remove tape slack before loading.

2 . Select the tape transport direction.

Check the tape transport direction

indicator.

To reverse the transport direction

1 Press the playback key for the direction to be played (lights green).

2 Stop playback (lights red).

÷ When recording is started, the tape is transported in the

direction selected in this step.

÷Wind the tape to the position where recording is to be

started.

rev. mode

Dolby NR

3 . Set the recording condition.

1 Select the reverse m ode.

2 Select the DOLBY NR m ode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

Temporary stop during recording

An unrecorded section of about 4 sec is pro-

duced (auto recording mute)

1 Obtain stop condition.

2 Press the record key tw ice.

About

4 sec

÷Press the record key to restart recording.

To interrupt recording

An unrecorded section of about 4 sec is produced

directly after the recording has been interrupted.

÷ An unrecorded section of about 4 sec is produced and

recording pause condition is reached.

To end recording

÷Recording pause condition is reached after approxi-

mately 4 sec.

4 . Select the source to be recorded.

The input source component to be recorded

should be displayed.

multi control

R-SE9T

Select an input source other than

“TAPE” input.

÷When the CD input is selected and if a disc has been set

in the CD player, its playback starts immediately.

5 . Start recording.

Lights

1 Play (or tune) the input

source to be recorded.

2 Start recording.

÷The recording level is adjusted automatically when the

CRLS function is used.

÷Recording stops automatically when the tape side(s) to

be recorded have been fully recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

To repeat a recording

Return to the recording start position.

÷If there is a non-recorded space of more than 4 seconds

before the recording start position, recording is aborted

and tape is rewound as shown below.

Press the rew ind key during recording.

During recording of re-

verse side (while 2is lit)

Tape stops after 2 sec. of transport.

Recorded tune

Tune to be re-recorded

Re-recording

Blank of 4 sec. or more

During recording

of top side

(while 3is lit)

÷If there is no recorded tune before, the tape will be

rewound then stopped.

Automatic Adjustment of the Recording Level (CRLS)

A standard recording level has been set in advance for the cassette deck (X-SE9), but w hen the CRLS

function is used, the m ax. recording level is set autom atically for the m usic source.

If the key has never been pressed

1 Play the contents to be recorded

.....The sound is recorded with the basic levelset with the

(or receive the radio station to be recorded).

unit.

If the key is pressed

2 Press the CRLS key.

.....The recording level is set automatically and stored in

memory as the recording level to be used with the

current input being selected. From the next time on,

this recording level is set automatically for that input

even if the key is not pressed.

To return to the basic level

.....Hold the key depressed until the indicator goes off

(for approx. 3 seconds).

About 20 sec

CRLS CRLS

÷The recording level setting completes in approx. 20

seconds, after which the deck enters the record-pause

mode.

CRLS

÷If recording is started during the setting (while the CRLS

indicator is blinking), distorted sound may be recorded.

÷If a non-recorded space of more than 3 seconds is

detected after the CRLS key is pressed, the recording

level setting is aborted.

Points for Recording from a CD or an MD

1 Pause the CD or MD to be played.

2 Use the skip keys (4 ¢) to select the title

to be recorded. (Pause w ill be reached at the

beginning of the selected title.)

3 Bring the cassette deck to recording pause

condition.

For recording from a CD or an MD, playback from

the m usic source and recording by the cassette deck

can be started sim ultaneously (synchro recording

function) w hen the cassette deck is set to record

pause status in advance.

4 Start playback of the CD or MD.

(Synchro recording w ill start.)

÷The recording is stopped when the stop key of the

playback unit is pressed.

Dolby HX Pro

The Dolby HX Pro headroom extension system records high frequencies such as the cymbal sound clearly by controlling

the bias current during recording according to the frequency composition of the sound being recorded. This system is

activated automatically during recording with this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of CD

R-SE9 T/ DP-SE9 / X-SE9 (En)

(program playback)

Listening in the desired sequence

Any tracks on the discs in the tray can be lis-

tened to in the desired sequence. (Max. 32 tracks)

Select the “CD” input.

Check that the CD player is in the stop mode.

If it is in play m ode

DP-SE9

TRACK NO.

0 1

0 : 0 0

Light the “PGM” indicator.

Lights

DP-SE9

P.MODE

PGM

TRACK NO.

0 1

Enter track Nos. in the order you want to play them.

÷ Up to 32 tracks can be programmed. When “FULL” is

displayed, no more tracks can be programmed.

÷ When an error has been made, press the CLEAR key and

select again.

1 Select the track.

PTY SEARCH

+1 0

Blinks

DP-SE9

TRACK NO.

PGM

Within 8 seconds!

0 2

P - 0 2

2 Confirm ation.

P.MODE

DP-SE9

TRACK NO.

TOTAL

PGM

0 2

- 4 : 4 5

3 Repeat steps 1 and 2 .

Start playback.

÷ Tracks will be played in the order they were programmed

(in order of P Nos.).

3/ 8

÷ When the 4 or the ¢ key is pressed during play, the

program will jump to the preceding or the following track

respectively.

÷ When the 4 key is pressed once during playback, the

play position returns to the beginning of the current track

being played.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of CD

R-SE9 T/ DP-SE9 / X-SE9 (En)

To add a track to the program

1 Select the track.

PTY SEARCH

+1 0

÷ When a track No. is entered, the track will be added to

the end of the existing program.

2 Press the P. MODE key.

To delete a programmed track

CLEAR

÷ Each time the key is pressed, the last track will be

deleted.

÷ A track being played can not be deleted.

To quit the program mode

Goes off

DP-SE9

TRACK NO.

P.MODE

0 1

÷ If the key is pressed during playback, normal playback in

order of tracks resumes from the current track.

÷ Cancellation also is made by pressing the Open/Close key.

Auto space function

This function is convenient for recording CD on a cassette tape. When the “space” key is pressed during programming

of tracks, a non-recorded space of a few seconds will be created between tracks. (The SPACE indicator flashes.) By

recording tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function

(which works by searching the non-recorded spaces) can be performed reliably.

÷ Even when the performances of two tracks are continu-

ous (which occurs with classical or live recording mu-

space

sic), the spaces will be created if they have different

track Nos.

÷ To cancel the creation of space, press the “space” key

again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of CD

R-SE9 T/ DP-SE9 / X-SE9 (En)

Repeated playback

Desired tracks or discs can be played back re-

peatedly.

Select the “CD” input.

To repeat a disc

Confirm that this is not lit.

DP-SE9

1 Confirm that the “PGM” indicator is not lit.

TRACK NO.

PGM

Ifthe “PGM” indicator is lit, press

the P.MODE key to turn it off.

0 1

2 Press the “repeat” key.

Lights

DP-SE9

repeat

REPEAT

TRACK NO.

0 1

3 Start playback.

To stop repeated playback

Press the “repeat” key again.

÷ The “REPEAT” indicator goes off and the playback

following the current mode of the CD player starts.

To repeat only the programmed tracks

1 Follow the procedure for “Listening in the

desired sequence” to step 3 to program the

tracks to be played.

⁄

DP-SE9

2 Press the “repeat” key.

TRACK NO. REPEAT

PGM

0 4

0 : 0 0

repeat

3 Start playback.

To stop repeated playback

Press the “repeat” key again.

÷ The “REPEAT” indicator goes off and the play-

back following the current mode of the CD player

starts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of CD

R-SE9 T/ DP-SE9 / X-SE9 (En)

(random playback)

Listening to an unexpected track sequence

As the tracks each tim e are selected random ly,

the m usic can be enjoyed.

Select the “CD” input.

Confirm that the “PGM” indicator is not lit.

Ifthe “PGM” indicator is lit, press

the P.MODE key to turn it off.

Confirm that this is not lit.

DP-SE9

P.MODE

PGM

TRACK NO.

0 1

Press the RANDOM key.

DP-SE9

TRACK NO.

RANDOM

÷ Playback stops after each track has been played once.

÷ The random playback can also be repeated by pressing

the “repeat” key.

To select another track in the middle of playing one

To cancel random playback

P.CALL

RANDOM

÷ Pressing the 4 key once returns to the

beginning of the track being played.

÷ From the track being played at this time, playback will

be in the normal order of tracks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Convenient CD recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

Selecting the optimum recording method

With this unit, the follow ing edit recording is

possible according to the purpose.

Note that this cassette deck cannot

record onto Metal tapes.

NNoottee

Giving preference to the tape length over the

track sequence ^{(time edit recording)}

ﬂ

If you want to avoid any tune being interrupted

at the end of tape

Edit recording of CD is possible by the sim ple op-

eration of entering the recording length of the tape.

Recording only desired tracks

(ONE TOUCH EDIT.....single track recording)

‡

If you want to select the tracks to be recorded

while playing a CD

Play a CD and, if a track you w ant to record starts,

press the O.T.E. (One Touch Edit) key. The track w ill

be recorded from the beginning.

One touch recording of an entire CD

(ONE TOUCH EDIT.....recording of all tracks)

If you want to record a CD in order of track

numbers

Press the O.T.E. (One Touch Edit) key w hen in the

stop m ode. The disc w ill start to be recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Convenient CD recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

Giving preference to the tape length over the track sequence

(time edit recording)

When the tape recording tim e is specified, record-

ing is executed w ith changing the track sequence

so that no track w ill be interrupted w hen the tape

direction is changed at the end of one side.

Recording preparations are required.• (Steps 1 to 4)

Select the “EDIT” mode.

Confirm that this is not lit

1 Confirm that the “PGM” indicator is not lit.

PGM

TRACK NO.

If the “PGM” indicator is lit, press the P.MODE key

to turn it off.

0 0

÷ To cancel the EDIT mode, press the P.MODE key of the

remote control unit.

DP-SE9

EDIT

2 Press the EDIT key.

TRACK NO.

EDIT

PGM

The editing is ended when no opera-

tion is executed for 8 sec or m ore.

C - - -

Enter the recording length of the tape.

Press the num eric keys as show n below .

30-m inute tape : 000)

46-m inute tape : 00006

DP-SE9

PTY SEARCH

+1 0

EDIT

PGM

0 3

F I L E

÷ When automatic edition has been completed, the “EDIT”

indicator lights.

Wh e n t h e “ t im e ” ke y is p re s s e d

repeatedly, a tape length of 46, 54, 60,

or 90 m inutes can be selected easily.

After selection, press the EDIT key to

go to step 3.

÷ When a wrong time has been entered, confirm that the

“EDIT” indicator is lit and start again from step 1.

÷ Up to 32 tracks can be edited.

÷ Every time the ¢ key is pressed, the edited track

numbers will be displayed in the changed order. Press

the 7 key to return to the track number of the first track.

Confirm that the “EDIT” indicator changes from

flashing to steady lighting, and then go to step 3.

Start edit recording.

DP-SE9

TRACK NO.

EDIT

O.T.E.

PGM

0 1

0 : 0 5

÷ The tape and CD stop automatically when recording has

completed.

Depending on the combination of conditions from CD contents (number of tracks and length of the tracks) and

tape recording time, interruption of a track may not be avoidable. In such a case, the respective track will not be

recorded.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

Convenient CD recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

(ONE TOUCH EDIT.....single track recording)

Recording only desired tracks

At the tim e of CD playback, any desired track can

be selected im m ediately for recording.

When playing an MD w ith the DM-SE9 (option),

the sam e procedure can be used to record only

that track on tape.

Recording preparations are required.• (Steps 1 to 4)

Play a CD.

Select a m ode other than random

play.

DP-SE9

TRACK NO.

0 3

1 : 0 7

Lights

When you want to record a track being played, press the O.T.E. key.

In case the key is pressed with track No.3

DP-SE9

O.T.E.

TRACK NO.

0 3

0 : 0 5

÷ Playback restarts from the beginning of the track being

played and recording starts at the same time.

When recording has been com pleted, a non-re-

corded portion of 4 seconds w ill be produced and

the cassette deck part w ill stop. The CD player w ill

enter tem porary stop condition.

To record a different track, repeat the steps 1 and 2.

To end recording in the middle

If you set CRLS beforehand you can enjoy better re-

cording.

÷ Both the cassette deck and CD player stop.

Download from Www.Somanuals.com. All Manuals Search And Download.

Convenient CD recording

R-SE9 T/ DP-SE9 / X-SE9 (En)

(ONE TOUCH EDIT.....recording of all tracks)

One-touch recording of an entire CD

When the O.T.E. key is pressed w hile the CD

player is in the stop m ode, recording of a CD can

be started at the sam e tim e as playback.

When the DM-SE9 (option) is connected and the

input selector is set to “MD”, the sam e proce-

dure can be used to m ake a one-touch record-

ing of the entire MD on tape.

Recording preparations are required.• (Steps 1 to 4)

Check that the CD player is in the stop mode.

If it is in play m ode

÷ When recording a CD, set the input selector to CD.

Step 2 also can be executed after the order of the

tracks has been program m ed.

Press the O.T.E. key.

O.T.E.

÷ Recording of CD starts at the same time as playback.

÷ When the tape direction is changed at the end of the

tape, no sound is recorded on the guide tape. When

interruption of a track is to be avoided, restart recording

from the very beginning of the reverse side according to

"Recording".

•

To end recording in the middle

÷ Both the cassette deck and CD player stop.

Download from Www.Somanuals.com. All Manuals Search And Download.

(Radio Data System)

R.D.S.

R-SE9 T/ DP-SE9 / X-SE9 (En)

RDS is a s ys t e m w h ich t ra n s m it s u s e fu l

inform ation (digital data) for FM broadcasts

together w ith the broadcast signal. Tuners and

receivers designed for RDS reception can extract

the inform ation from the broadcast signal for use

w ith various functions such as autom atic display

of the station nam e.

For reception of RDS stations, the RDS auto

presetting function m ust be used to preset the

stations.

“NO DATA” w ill be flashed w hen a station not

preset by auto presetting is received.

This unit is equipped with the following

functions utilizing RDS data:

Lights

PTY (Program Type Identification) Search :‚

The tuner automatically searches for a station which is

currently broadcasting a specified program type (genre).

AUTO

ST.

TUNED

RDS

B B C 1 F M

The “RDS” indicator lights up when

PS (Program Service Name) Display : (See below.)

When an RDS broadcast is received, the station name is

automatically displayed.

an RDS broadcast (signal) is received.

EON (Enhanced Other Netw ork) :

* Some functions may not be provided or be given

different names depending on countries or areas.

When the information to be received is set in advance and

any RDS station in the same network starts broadcasting

of such information, the reception automatically will be

switched to that station.

To switch the display contents

Display m ode priority ranking

Pre ssing the DISPLAY ke y

changes the display contents.

1 PS (Program Service Nam e) Display :

Whe n an RDS broadcas t is re ce ive d, the

s tation nam e is autom atically dis playe d.

If no PS data w as s e nt, “ NO PS ” is dis

playe d.

RDS

DISPLAY

AUTO

ST.

TUNED

RDS

B B C 1 F M

2 Frequency Display :

The frequency of the current station is displayed.

AUTO

ST.

TUNED

RDS

MHz

F M 1 ) 2. 5 )

Download from Www.Somanuals.com. All Manuals Search And Download.

R.D.S.

R-SE9 T/ DP-SE9 / X-SE9 (En)

(PTY search)

Searching for a desired program type

By specifying the type of program (genre) you

w a n t t o lis t e n t o , t h e t u n e r a u t o m a t ica lly

s e a rch e s fo r a s t a t io n w h ich is cu rre n t ly

broadcasting a program of the specified type.

For reception of RDS stations, the RDS auto

presetting function m ust be used to preset the

stations.

Set the reception band to FM.

Activate the PTY search mode.

RDS

PTY

N E W S

When an RDS broadcast is received, the program type is

show n on the display. If no PTY data is available, or if the

station is not an RDS station, “NONE” is displayed.

Select the program type you desire.

Use the program type table on the right for your

Program type table

Program Type Name

Display

convenience.

Pop Music

POP M

Rock Music

M.O.R. Music

Light Classic Music

Serious Classic Music

Other Music

News

ROCK M

M.O.R. M

LIGHT M

CLASSICS

OTHER M

NEWS

(4)

DOWN

A To select using the P.CALL keys

P.CALL

program

type

program

type

Current Affairs

Information

Sport

AFFAIRS

INFO

Select while "PTY" is lit.

SPORT

Education

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

(¢)

Drama

The P.CALL keys let you select

from all 29 program types in the

order show n at right.

Press the key and release it w hen

the desired type is displayed.

Cultures

Science

Varied Speech

Weather

WEATHER

FINANCE

CHILDREN

SOCIAL A

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ

Finance

Children’s programmes

Social affairs

Religion

B To select w ith the num eric keys

Phone in

Travel

Leisure

PTY SEARCH

+1 0

Jazz music

Country Music

National Music

Oldies Music

Folk Music

Documentary

COUNTRY

NATION M

OLDIES

The num eric keys allow to you

select program m e types 1 to 0

directly. If you w ant to select

one of the other program m e

types, use the P.CALL key.

FOLK M

DOCUMENT

*M.O.R. Music (Middle of the Road Music)

• The operations shown in A can also be performed with

the TUNING keys on the front control.

“NO DATA” is displayed if this operation is

attem pted before perform ing the RDS auto pre-

setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

R.D.S.

R-SE9 T/ DP-SE9 / X-SE9 (En)

Start the search.

EXAMPLE: Searching for a Rock Music broadcast.

PTY SEARCH

+1 0

Display while searching

Blinks

R-SE9T

AUTO

ST.

TUNED

RDS

PTY

R O C K M

Program type name display

To select another program type

•

When the PTY is received, the PTY name blinks and

the “PTY” lights up.

Repeat steps 1, 2 and 3

Display when a station is received.

Goes out

R-SE9T

AUTO

ST.

TUNED

RDS

B B C 1 F M

Station name display

• No sound is heard while “PTY” is blinking.

• If the desired program type cannot be found, “NO

PROG” is displayed, then after several seconds the

display returns to the original display.

• If the desired program type is found, that program is

received. The program type display changes temporarily

to the frequency display, and then to the station name

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

R.D.S.

R-SE9 T/ DP-SE9 / X-SE9 (En)

(EON reservation)

To be able to listen to the desired information at any time

By using the EON function, which manages the information of other stations, listening to desired information like

traffic information or news etc. can be reserved even when it is not being transmitted at the present. When

listening to a station with the “EON” display lit and another station of the same network starts to broadcast an

information program for which a reservation has been made, then that station will be selected automatically.

When the desired information program ends, return is made to the original program.

For reception of RDS stations, the RDS auto presetting function m ust be used to preset the stations.

Set the reception band to FM.

Select the desired information.

Each press sw itches the m odes as follow s.

1TA..........................Traffic Announcem ent

2NEWS................... New s

3INFO...................... Inform ation

4Display not lit....... EON cancelled

TA/

NEW S/ INFO.

This lights for stations where TP

(TrafficProgram)canbe received.

When “INFO” is selected

AUTO

ST.

TUNED

RDS

EON

INFO

B B C 1 F M

÷ Please execute automatic presetting when TA, NEWS,

and INFO can not be selected.

Receive an RDS station.

“RDS” and “EON” are lit

Select a station w here “RDS”

and “EON” are lit.

EON

AUTO

ST.

TUNED

RDS

INFO

P.CALL

B B C 2 F M

÷ When “TA” has been selected in step 1, always select

a station for which the “TP” indication is lit.

÷ When “EON” does not light although an RDS station is

received, that station is not transmitting EON data.

Please select a different station.

Wait for the desired information.

÷ When one of the stations of the network of the station

received in 2 starts broadcasting the program contents

selected in 1, that station will be received automatically.

At this time, the input selection becomes TUNER, and

CD or MD playback will pause.

CD or tape playback also m ay be started.

As long as the pow er is ON, standby condition w ill

exist.

However, external equipment (AUX) will remain as it is.

When reception of the desired EON programs is com-

plete, the input selector returns to the previous input

source.

÷ When the power is OFF and during recording, the EON

TP (Traffic Program ) Indication

function does not operate.

When the “TP” indication is lit, this indicates that this

station or a station in the same network is transmitting

traffic information.

When “TP” is displayed for the station presently being

received, the traffic information of this station can be

heard even without EON reservation.

÷ When the transmission of the selected program contents

ends in case of automatic reception with the EON func-

tion, return will be made to the status directly before

operation of the EON function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Compensating for the bass and treble tones

R-SE9 / DP-SE9 / X-SE9 (En)

Compensation by adjusting the bass and treble levels

The levels of the bass and treble tones can be set independently.

Use the multi control knob. ...

Compensation by applying the preset compensation levels

Use the EX. BASS function. ...

The levels ofthe bass and treble tones are enhanced bythe preset levels.

The bass level enhancem ent is effective in listening at a low

volum e. The treble level is enhanced to a predeterm ined level

regardless of the current volum e setting.

To adjust the multi control

During tuner reception

Be sure to turn EX.BASS off before this adjustm ent.

1 Each press sw itches the display.

R-SE9T

mode

1SELECTOR

2TUNING

3BASS

4TREBLE

TUNING

Displayed for 5 sec.

2 Press the MODE key w hile “TUNING” is dis-

played.

To enter BASS adjustm ent m ode: Display “BASS”.

To enter TREBLE adjustm ent m ode: Display “TREBLE”.

3 While “BASS” or “TREB” is displayed, turn

Displayed for 5 sec.

R-SE9T

the m ulti control to set to the desired level.

multi control

BASS + 1)

÷ Both BASS and TREBLE can be adjusted in the range

between -10 and +10.

During playback of a CD, etc.

(in other modes than TUNER mode)

1 Press the MODE key repeatedly.

÷ The BASS level set by the multi control is applied to the

current N.B. (Natural Bass) boosting to enhance it further.

mode

Enter the BASS m ode or TREBLE

m ode.

2 Perform the sam e operation as step 3 in

“During tuner reception”.

÷ Turning EX.BASS on switches off the N.B. (Natural Bass)

boosting automatically.

To compensate using the EX.BASS function

÷ Turning EX.BASS on replaces the levels set using the multi

control with the level preset with the EX.BASS function.

÷ Turning EX.BASS off recalls the bass and treble levels set

with the multi control.

÷ Pressing the switch in the EX.BASS mode returns to the

normal mode and the EX.BASS indicator goes off.

Turn EX.BASS on.

Lights.

EX. BASS

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock adjustment

R-SE9 T/ DP-SE9 / X-SE9 (En)

This unit incorporates a clock function. Be sure

to adjust the correct tim e before using the tim er

function.

Ensure that the pow er is OFF.

Activate the clock adjustment mode.

Exam ple: Adjustm ent to 8:45

R-SE9T

auto/mono

AM 12:))

÷ The time display starts to blink.

Enter the hour.

multi control

R-SE9T

To decrease

the figure

To increase

the figure

AM 8:))

enter

÷ The time of the day is represented in 12-hour AM/PM

method.

÷ Press the “enter” key. The hour is entered and the

minute display starts to blink.

Enter the minute.

multi control

R-SE9T

AM 8:45

To decrease

the figure

To increase

the figure

÷ If you make a mistake, restart from the beginning.

÷ To adjust correct time, press the “enter” key at the same

moment as a time announcement.

enter

÷ The time display blinks after a power failure or when the

power cord has been unplugged from the AC outlet and

plugged again. In such a case, adjust the clock again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer operation

Adjust the clock before setting the tim er.

Timer operation

R-SE9 T/ DP-SE9 / X-SE9 (En)

Operate easy To use Tim er (O.T.T.)

Playback of the selected input source starts at the specified tim e, and the pow er is sw itched off after one

hour. This tim er operates only once directly after setting.

Sleep tim er

The pow er is turned OFF autom atically after the specified period has elapsed.

Tim er playback, tim er recording

Playback of the selected source (or broadcast recording) w ill be executed for the set tim e.

AI tim er playback

When tim er playback starts, the volum e increases gradually.

Adjust the clock before setting the tim er.

Operate easy To use Timer (O.T.T.)

Timer playback is possible simply by setting the time.

The source selected last before the power was switched

off will be played. One hour after start of timer play-

back, the power will be switched off automatically.

The program tim er does not operate during

playback by the O.T.T. tim er.

1 Select the source to be played and set the

÷ When the N.B. key is pressed, the input source will be

displayed, and after a few seconds, the ON time will be

displayed.

volum e.

2 Sw itch OFFthe pow er supply.

3 Press the N.B. key.

ON time display

R-SE9T

N.B.

O.T.T.

AM 7:))

Blinks

4 Set the ON tim e.

multi control

÷ The ON time can be set in steps of 5 minutes.

÷ In case of combination with another timer, the input

source which operated last will be played.

To increase

the figure

To decrease

the figure

5 Press the “enter” key.

enter

To cancel

Press the N.B. key tw ice w hile the pow er is OFF.

Adjust the clock before setting the tim er.

Sleep timer

Set the num ber of m inutes after w hich the pow er

is to be turned OFF.

÷ The power is turned OFF automatically after the set time

has elapsed.

÷ Each press decreases the time by 10 minutes. The

maximum time that can be set is 90 minutes.

1 Turn the pow er ON.

90=80=70...30=20=10=Cancel=90=80...

Lights

R-SE9T

SLEEP

9 )

2 Set the tim e.

Duration for sleep timer

SLEEP

To cancel

Turn the pow er OFF or press the SLEEP key until

the sleep tim e is cancelled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer operation

Adjust the clock before setting the tim er.

R-SE9 T/ DP-SE9 / X-SE9 (En)

Timer programming

This is a 24 hour tim er.

Select the tim e and duration for the operation and the contents, and select operation or no operation

as required.

Adjust the clock before setting the tim er.

Make preparations for the play (recording).

÷ To listen to radio

÷ To listen to CD

÷ To listen to tape

÷ Listening to MD

÷ For recording

The station should Insert a disc.

Set a tape into deck. Set a disc into the Make prepa-

be preset prior to (Program playback

MD recorder.

rations for re-

cording.•

(Steps 1 to 4)

the above.

is not possible.)

For recording and playback with an MD

recorder (DM-SE9), also refer to the instruc-

tion manual enclosed with the DM-SE9.

Adjust the listening volume.

volume

control

÷ For recording of broadcasts, muting becomes ON auto-

matically when the power is switched on by the timer.

3^{Set the on/standby switch to standby}

position.

on/standby

Select a program No.

÷ The “PROG.” indicator lights.

÷ When a timer reservation already has been made, the

contents will change to the new settings.

band

R-SE9T

During display of program content

enter

PROG.

1):))

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer operation

Adjust the clock before setting the tim er.

R-SE9 T/ DP-SE9 / X-SE9 (En)

Enter the ON time.

÷ After entering the “hour” with the procedure in 1 and 2,

enter the “minute” using the same procedure.

multi control

R-SE9T

To decrease

the figure

To increase

the figure

enter

PROG.

AM 7:))

÷ If you commit a mistake, restart from step 4.

Enter the OFF time.

÷ After entering the “hour” with the procedure in 1 and 2,

enter the “minute” using the same procedure.

multi control

R-SE9T

To decrease

the figure

To increase

the figure

enter

PROG.

AM 8:))

÷ If you commit a mistake, restart from step 4.

Make the desired reservation.

For timer playback or AI timer playback

Timer recording of radio broadcasts

1 Select the m ode.

multi control

Select “PLAY” or “AI”.

multi control

Select “REC”.

PLAY ....... Tim er play

AI ........... Tim er play w ith gradually

increasing volum e

REC

PLAY

REC

enter

Enter it.

PLAY

PROG.

2 Select the input source.

multi control

Select the source

2 Select the input source.

to be played.

TUNER

AUX

multi control

Select the source to be played.

TUNER

enter

TUNER

PROG.

TAPE

MD (DM-SE9)

AUX

Enter it.

enter

3 Select the broadcast station (only

w hen TUNER is selected).

Enter it.

multi control

S e le ct t h e p re s e t

station No.

3 Select the broadcast station (only w hen TUNER is

selected).

multi control

Select the preset station No.

enter

Enter it.

PROG.

4 Select the recording unit.

enter

multi control

Enter it.

TAPE

MD (DM-SE9)

enter

Continued on next page

Enter it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer operation

Adjust the clock before setting the tim er.

R-SE9 T/ DP-SE9 / X-SE9 (En)

Set the program.

÷ The “PROG.” indicator lights.

R-SE9T

mode

PROG.

1):)5

÷ The timer does not operate when no program is set.

This com pletes the program tim er reservation. Please refer to the follow ing item for confirm ation,

changes, etc.

The reservation contents cannot be cleared. The

contents are cleared only when they are changed.

Ensure that the pow er is OFF.

NNoottee

Check the reservation content.

÷ The reserved contents will be displayed for 3 seconds

per item. After this, the previous display content appears

again.

band

To change the reserved contents

Restart the procedure of “Tim er program m ing”

from the beginning.

When timer operation is not required

Extinguish the program indication.

Goes off

R-SE9T

mode

1):)5

÷ The reservation contents are held in memory.

R-SE9T

To set the same timer program again

Light the program indication.

mode

PROG.

1):)5

Lights

÷ Also prepare the disc or tape and adjust the listening

volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Items

R-SE9 T/ DP-SE9 / X-SE9 (En)

Handling of discs and tapes

Disc handling precautions

Handling

Hold compact discs so that you

do not touch the playing surface.

Cleaning

If fingerprints or foreign matter be-

come attached to the disc, lightly wipe

the disc with a soft cotton cloth (or

similar) from the center of the disc

outwards in a radial manner.

÷ Do not attach paper or tape to

Label side

Playing side

either the playing side or the

label side of compact discs.

÷ The paste left on the label sur-

face after a sticker has been

peeled off is a factor which

may cause malfunction.

Sticker

Storage

When a disc is not to be played for a

long period of time, remove it from the

CD player and store it in its case.

Sticky paste

If the surface is sticky due to

remaining paste, be sure to

clean it with alcoholbefore use.

...........................................................................................................................................................................................................................................

CD (12 cm , 8 cm ), CDV (only the audio part)

Discs which can be played with this unit

÷ With CD-G (CD Graphics) discs, this unit can play only

the audio.

÷ Please do not use discs which are not round because

they may cause a malfunction.

Caution on disc used

Never play cracked or w arped disc.

During playback, the disc rotates at high speed in the

player.

Therefore, to avoid malfunction, never use a cracked or

deformed disc or a disc repaired with tape or adhesive

agent.

Notes on cassette tape

Safety tab (accidental erasure prevention tab)

After an important recording has been finished, break the

safety tab, to prevent the recorded contents from being

erased or recorded on accidentally.

To store cassette tapes

do not store the tapes in a place which is subject to direct

sunlight, or near equipment that generates heat. Keep the

cassette tapes away from any magnetic field.

For A side

For B side

When there is slack in the tape

In such a case, insert a pencil into the reel hole and wind

the reel hub to remove the slack.

Apply tape only to the position

where the tab has been removed.

To re-record

1.Longer tape than 110 m inutes cassette tape

Since longer tape than 110 minutes cassette tape is

very thin, the tape could adhere to the pinch roller or

be easilycut.Itis recommendedthatthese tapes not

be used with this unit to prevent possible damage.

2.Endless tapes

Do not use an endless tape, as this could damage the

mechanism of the unit.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Items

R-SE9 T/ DP-SE9 / X-SE9 (En)

Maintenance

Cleaning the head section

Cleaning the heads and peripheral com ponents

For maintaining the best condition of the deck and for

longer service life, always keep the heads (recording /

playback / erase), capstan and pinch roller clean.

For the cleaning, use a cleaning cassette available in audio

stores.

Dem agnetizing the head

When the recording / playback head is magnetized, the

sound quality will deteriorate. In such a case, demagnetize

the head using a commercially available demagnetizer

(head eraser).

For details, read the instruction manual of your cleaning

tape.

Maintenance of the Set

When the front panel, the case, etc. becomes dirty, wipe

with a soft, dry cloth. Do not use thinner, alcohol, etc., as

these can cause discoloration.

Do not use contact cleaners because it could cause a

malfunction. Be specially careful not to use contact clean-

ers containing oil, for they may deform the plastic compo-

nent.

When your unit needs to be repaired, bring the entire set

(Speakers excluded) to your dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Items

R-SE9 T/ DP-SE9 / X-SE9 (En)

Reference

Beware of condensation

When water vapor comes into contact with the surface of

a cold material, condensation is produced.

If condensation occurs, correct operation may not be

possible, or the unit may not function correctly.

This is not a malfunction, however, and the unit should be

dried-out.

Be especially careful in the following conditions:

÷ When the unit is brought from a cold place to a warm

place, and there is a large temperature difference.

÷ When a heater starts operating.

÷ When the unit is brought from an air-conditioned place

to a place of high temperature with high humidity.

÷ When there is a large difference between the internal

temperature of the unit and the ambient temperature,

or in conditions where condensation occurs easily.

(To do this, turn the power switch ON and leave the unit

as it is for several hours.)

Dolby noise reduction and HX Pro headroom extension

manufactured under licence from Dolby Laboratories

Licensing Corporation. HX Pro originated by Bang &

Olufsen.

“DOLBY”, the double-D symbol and “HX PRO” are

trademarks of Dolby Laboratories Licensing Corporation.

Memory backup function

Stored contents w hich Clock display

are cleared im m ediately

w hen pow er plug is un-

plugged from pow er out-

let

Stored contents w hich

are cleared in at least a

day after pow er plug is

unplugged from pow er

outlet

Am plifier

POWER status (ON or

OFF)

Input selection

Volume control value

Tuner unit

Note related to transportation and movement

(CD player)

Before transporting or m oving this unit, carry out

the follow ing operations.

Receiving band

Frequency

Preset stations

Program settings

1. Turn the power ON but do not load a disc.

2. Wait a few seconds and verify that the display

shown appears.

WARNING NOTICE:

DP-SE9

IN MOST CASES IT IS AN INFRINGEMENT OF COPY-

RIGHT TO MAKE COPIES OF TAPES OR DISCS WITH-

OUT THE PERMISSION OF THE COPYRIGHT OWN-

ERS. ANYONE WISHING TO COPY COMMERCIALLY

AVAILABLE TAPES OR DISC SHOULD CONTACT THE

MECHANICAL COPYRIGHT PROTECTION SOCIETY

LIMITED.

11 12 13 14 15

n o

d I S C

3. Turn the power OFF.

CD accessories

The Cd accessories (stabilizer, protection sheet, protec-

tion ring, etc.) which are marketed for improving the

sound quality or protecting discs as well as the disc

cleaner should not be used with this system because

they may cause malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

R-SE9 T/ DP-SE9 / X-SE9 (En)

What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult

the table below to see if the problem can be corrected before seeking help from your dealer or service representative.

Operation to reset

The m icrocom puter m ay fall into m alfunction (im pos-

R-SE9T

Pull the pow er plug from the receptacle, and then

sibility to operate, erroneous display, etc.) w hen the

plug it in again w hile keeping the “on/ standby”

pow er cord is unplugged w hile pow er is ON or due

key pressed.

DP-SE9

to an external factor. In this case, execute the follow -

ing procedure to reset the m icrocom puter and return

Pull the pow er plug from the receptacle, and then

it to norm al condition.

plug it in again.

X-SE9

÷ Please note that resetting the microcomputer clears

Pull the pow er plug from the receptacle, and then

plug it in again w hile keeping the “stop (7)” key

pressed.

the contents stored in it returns it to condition when it

left the factory.

Receiver unit, speakers

Sym ptom

Cause

÷ The speaker cords are discon- ÷ Conne ct prope rly re fe rring to @

nected. “System connection”.

Rem edy

Sound is not produced.

÷ The volume control is set to the ÷ Adjust to an required volume.

(

minimum position.

÷ The MUTE switch of remote con- ÷ Switch MUTE OFF.

trol unit is switched ON.

÷ The headphone plug is inserted ÷ Unplug the headphone plug.

into the jack.

All digits of the display section ÷ The speaker cords are short-cir- ÷ Turnthe powerOFF,remove the short- @

show flashing indication of “--”

and no sound is put out.

cuited.

circuit and turn the power ON again.

Sound is not produced from the ÷ The speaker cords are discon- ÷ Conne ct prope rly re fe rring to @

left or right speakers.

nected.

“System connection”.

The clock display blinks w ithout ÷ There was a power failure.

÷ Adjust the present time again.

changing the figures.

÷ The power cord was unplugged ÷ Adjust the present time again.

from the outlet.

Tim er operation is not possible.

÷ The present time has not been ad- ÷ Adjust the present time referring r

justed or there was a power failure. to “Clock adjustment”.

÷ The timer ON time and OFF time ÷ Set the timerONtime and OFFtime. y

have not been set.

÷ The timer execution was not set ÷ Press the “m ode” key to set up i

up.

the execution.

Radio stations cannot be received.

The antennashave notbeenconnected. ÷ Connect antennas.

÷ A proper broadcasting band has ÷ Select a band.

not been selected.

÷ The frequency of the station to be ÷ Tune to the frequency of the de- §

received is not tuned.

sired station.

Noise interferes.

÷ Car ignition noise.

÷ Install the outdoor antenna in an 9

apart position from the road.

÷ Influence of an electric appliance. ÷ Switch the suspected electric ap-

pliance OFF.

÷ A TV set is installed near the sys- ÷ Install the TV or the system at an

tem.

increased distance between them.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

R-SE9 T/ DP-SE9 / X-SE9 (En)

Receiver unit, speakers

Sym ptom

Cause

Rem edy

After presetting, reception is not ÷ The frequency of the preset sta- ÷ Preset stations with tunable fre- ¶

possible w ith preset call.

tion is not tunable.

quencies.

÷ The presetmemoryhas beencleared ÷ Preset stations again.

because the power cord has been

unplugged for a long period.

Cassette deck unit

Sym ptom

Cause

Rem edy

Sound ca nnot be produce d by ÷ The head is dirty.

pressing the play key or no opera-

÷ Clean the head referring to “Maintenance”.

tion occurs even w hen an opera- ÷ The tape is wound too tight due to ÷ Try another tape.

tion key is pressed.

irregular winding.

÷ A nonrecorded tape is played.

÷ Play a recorded tape.

No operation occurs even w hen

an operation key is pressed.

The operationkeyis pressedinless than ÷ Press operation keys after waiting for

4 seconds after turning the power ON.

more than 4 seconds.

™

÷ A tape is not inserted in the unit.

÷ The tape is wound too tight due to ÷ Try another tape.

÷ Insert a tape.

irregular winding.

÷ The tape is fully wound to one of ÷ Change the tape transport direction or re-

the reels.

verse the tape insertion orientation.

The DPSS m alfunctions.

÷ The tape used is not suitable for ÷ Refer to “DPSS”.

DPSS, for example the spaces be-

tween tunes may be too short.

The tray does not open w hen the ÷ The keyis pressed during recording. ÷ Press in stop mode.

Open/ Close key is pressed.

÷ The microcomputeris malfunction- ÷ Unplug the power cord and plug it again.

ing due to external noise.

Sound is harsh or high

frequencies are not reproduced.

÷ The head is dirty.

÷ Clean the head referring to “Maintenance”.

÷ The tape is stretched or shrunk.

÷ Try another tape.

Sound is distorted.

Noise is noticeable.

÷ The recording revel has not been ÷ Refer to “Recording”.

set with the CRLS key.

÷ The tape being played was re- ÷ Try another tape.

corded with distorted sound.

•

÷ The tape head is magnetized.

÷ External noise is induced.

÷ Demagnetize the head referring to “Main-

tenance”.

÷ Install the system at a distance from other

electric appliances and TV.

÷ A tape recorded with Dolby NR ON ÷ Set the Dolby NR to on.

is played with Dolby NR OFF.

Sound fluctuates.

÷ The capstans or pinch rollers are dirty. ÷ Clean the head referring to “Maintenance”.

÷ The tape is wound irregularly.

÷ Wind the tape again by fast forwarding,

rewinding or playing from an end to the

other.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

R-SE9 T/ DP-SE9 / X-SE9 (En)

Cassette deck unit

Sym ptom

Cause

Rem edy

Recording cannot be started by ÷ The recording protect tab of the ÷ Use a cassette with an unbroken re- o

pressing the record key.

cassette has been broken.

÷ The TAPE input is selected.

cording protect tab or block the hole.

÷ Select the source to be recorded ª

with the input selector key.

÷ The tape is fully wound to one of ÷ Change the tape transport direc- •

the reels.

tion or reverse the tape insertion

orientation.

CD player unit

Sym ptom

Cause

Rem edy

A CD is placed in the player but it ÷ The disc is placed upside down.

cannot be played.

÷ Place the disc properly, with the )

label side facing upward.

÷ The disc position is displaced.

÷ The disc is extremely dirty.

÷ Place the disc properly.

)

÷ Clean the disc referring to “Disc o

handling precautions”.

÷ The disc is scratched.

÷ Try another disc.

÷ Dew is condensed on the optics lens. ÷ Refer to “Beware of condensation” Q

and remove the condensation by

evaporation.

Sound is not produced.

÷ The disc has not been placed.

÷ Place a disc in the CD player.

)

÷ The player is not put to the play mode. ÷ Press the 6 key.

÷ The disc is extremely dirty.

÷ The disc is scratched.

÷ The disc is dirty.

÷ Clean the disc referring to “Disc o

handling precautions”.

÷ Try another disc.

Sound skips.

÷ Clean the disc referring to “Disc o

handling precautions”.

÷ The disc is scratched.

÷ Try another disc.

÷ The player is subject to vibration. ÷ Install the unit in a place not sub-

ject to vibrations.

Remote control unit

Sym ptom

Cause

Rem edy

Rem ote control operation is not ÷ Batteries are exhausted.

possible.

÷ Replace with new batteries.

÷ The remote control is too far away ÷ Operate the unit inside the remote &

from the system, the controlling angle

is deviated or there is an obstacle in

between.

controllable range.

÷ There is no tape or CD set in the ÷ Set a tape or CD in the component

component to be played. to be played.

÷ An attempt is made to play the cas- ÷ Wait until the recording ends.

sette deck which is recording some-

thing.

1.With some tapes, a squeaky noise is produced when the tape is stopped automatically. This is due to the tape

protection function, and not a malfunction.

NNootteess

2.Do not use longer than 110 minutes tapes, for the tape is too thin and gets easily tangled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

R-SE9 T/ DP-SE9 / X-SE9 (En)

Receiver (R-SE9T)

CD player (DP-SE9)

Laser ............................................. Sem iconductor laser

Playing rotation .................... 200 rpm ~ 500 rpm (CLV)

Frequency response ................. 4 Hz ~ 20 kHz, ±1.0 dB

Signal to noise ratio ......................... More than 100 dB

Dynam ic range ....................................More than 95 dB

Total harm onic distortion

[Am plifier section]

Rated pow er output

(DIN) 1 kHz at 6 Ω, 0.7 % T.H.D............ 40 W + 40 W

Total harm onic distortion

............................ 0.06% (40 Hz ~ 20 kHz, 20 W, 6 Ω)

Frequency response ........ 20 Hz ~ 40 kHz, +0 dB, –3 dB

Input sensitivity / Im pedance

.......................................................... 200 m V / 47 kΩ

Output level / Im pedance

SUPER WOOFER PRE OUT................ 2.0 V / 1.5 kΩ

TAPE REC ........................................... 200 m V / 1 kΩ

Signal to noise ratio

.................................... Less than 0.004 % (at 1 kHz)

Channel separation .......... More than 92 dB (at 1 kHz)

Wow & Flutter ............................. Unm easurable Lim it

Output level / Im pedance

Fixed ........................................................ 1.2 V / 1 kΩ

Digital output

Optical ...................................... –15 dBm ~ –21 dBm

(w ave length 660 nm )

............................................................. 92 dB (IHF’66)

Total control

BASS ........................................... ±10 dB (at 150 Hz)

TREBLE....................................... ±10 dB (at 10 kHz)

General

Pow er consum ption .............................................. 10 W

Dim ensions .................................................. W: 213 m m

H: 97 m m

[FM Tuner section]

Tuning frequency range ............... 87.5 MHz ~ 108 MHz

Usable sensitivity (DIN)

D: 249 m m

MONO

Weight (net) .......................................................... 2.2 kg

.. 1.2 µV (75 Ω) / 13.2 dBf (40 kHz DEV., S/ N 26 dB)

Signal to noise ratio

Cassette deck (X-SE9)

(DIN w eighted at 1 kHz, 65.2 dBf input)

MONO .............................................................. 65 dB

STEREO ............................................................ 58 dB

Selectivity (DIN ±300 kHz) .................................... 64 dB

Stereo separation (DIN at 1 kHz) ........................ 40 dB

Track ...................................... 4-track, 2-channel stereo

Recording system ................................ AC bias system

(Frequency: 105 kHz)

Heads

Playback / recording head ...................................... 1

Erasing head ............................................................ 1

Motors ........................................................................... 1

Wow and flutter ................................. 0.1 % (W.R.M.S.)

Fast w inding tim e ...................... Approx. 110 seconds

(C-60 tape)

[AM Tuner section]

Tuning frequency range ................ 531 kHz ~ 1,602 kHz

Usable sensitivity (30% m od., S/ N 20 dB)

.................................................... 12 µV / (500 µV/ m )

Signal to noise ratio (at 30% m od., 1 m V input)

........................................................................... 48 dB

Output level / Im pedance (30% m od., 1 m V input)

............................................................... 0.18 V / 1 kΩ

Frequency response

TYPE I tape .................... 40 Hz to 18,000 Hz, ±3 dB

TYPE II tape ................... 40 Hz to 19,000 Hz, ±3 dB

Signal to noise ratio

Dolby B NR ON ............................ 67 dB (CrO2 tape)

Dolby C NR ON ............................ 73 dB (CrO2 tape)

Dolby NR OFF .............................. 60 dB (CrO2 tape)

Input sensitivity / Im pedance ............ 77.5 m V / 47 kΩ

Output level / Im pedance ................... 775 m V / 10 kΩ

General

Pow er consum ption .............................................. 80 W

Dim ensions .................................................. W: 213 m m

H: 97 m m

D: 282 m m

Weight (net) .......................................................... 3.8 kg

General

Pow er consum ption .............................................. 14 W

Dim ensions .................................................. W: 213 m m

H: 77 m m

D: 249 m m

Weight (net) .......................................................... 2.3 kg

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may

be changed without notice.

NNootteess

2.Sufficient performance may not be possible at very low temperatures (0°C or less).

Download from Www.Somanuals.com. All Manuals Search And Download.

R-SE9 T/ DP-SE9 / X-SE9 (En)

For your records

Record the serial number, found on the back of the unit, in the

spaces designated on the warrantycard, and in the space provided

below. Refer to the model and serial numbers whenever you call

upon your dealer for information or service on this product.

Model

Serial Number

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Cooktop mk 64 r User Manual
Infinity Car Speaker 3012cf User Manual
Insignia Security Camera HD16 User Manual
Intel Computer Hardware MB875 User Manual
Intel Laptop TECRA S5 User Manual
Kawasaki Computer Hardware 80C152 User Manual
Kenmore Vacuum Cleaner 11631591 User Manual
Kenmore Washer 1102982 User Manual
Keys Fitness Home Gym DCV6 0R User Manual
Kompernass Hair Care Product KH5527 User Manual