STEREO INTEGRATED AMPLIFIER/TUNER
R-K1000
INSTRUCTION MANUAL
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
© B60-5712-00/00 (EW/XW) BT
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS
Caution: Read this page carefully to ensure safe operation.
Read Instructions
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product and
cart combination to overturn.
– All the safety and operating instructions should
be read before the product is operated.
Retain Instructions
– The safety and operating instructions should be
retained for future reference.
5. Ventilation
– Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating,
and these openings must not be blocked or
covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Heed Warnings
– All warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions
– All operating and use instructions should be
followed.
1. Cleaning
– Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Power Sources
– This product should be operated only from the
type of power source indicated on the product. If
you are not sure of the type of power supply to
your home, consult your product dealer or local
power company.
2. Attachments
– Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. CAUTION – Polarization
3. Water and Moisture
– This product may be equipped with a polarized
alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
– This product shall not be exposed to dripping
and splashing – for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
Do not place an object containing liquid, such as a
flower vase, on the appliance.
4. Accessories
– Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended
by the manufacturer. Any mounting of the product
should follow the manufacturer’s instructions, and
should use a mounting accessory recommended
by the manufacturer.
Continued to next page
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3
Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS
8. Power Cord Protection
d)If the product does not operate normally by
following the operating instructions.
– Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct change
in performance – this indicates a need for
service.
g)If an abnormal smell or smoke is detected.
9. Lightning
– For added protection for this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
14. Replacement Parts
– When replacement parts are required, be sure
the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
10. Overloading
– Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
15. Safety Check
– Upon completion of any service or repairs to
this product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
11. Object and Liquid Entry
– Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the product.
16. Wall or Ceiling Mounting
– This product should be mounted to a wall
or ceiling only as recommended by the
manufacturer.
12. Servicing
17. Heat
– Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
– This product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products that produce heat. Do not place a
flaming object, such as a candle or lantern, or near
the product.
13. Damage Requiring Service
– Unplug this product from the wall outlet and
refer servicing to qualified service personnel under
the following conditions:
18. Power Lines
– An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
a) When the power-supply cord or plug is
damaged,
b)If liquid has been spilled, or objects have
fallen into the product,
c) If the product has been exposed to rain or
water,
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
4
Safety Precautions
19. Outdoor Antenna Grounding
If an outside antenna or cable system is
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
–
connected to the product, be sure the antenna or
cable system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Products with the symbol (crossed-
out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic
equipment should be recycled at
a facility capable of handling these
items and their waste byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
Notes:
1. Item 7 is not required except for grounded or
polarized equipment.
2. Item 19 complies with UL in the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
5
What the R-K1000 Can Do
Supports a host of component types
External Input Terminals
As well as analog input terminals for record players or cassette decks, the R-K1000 also features
an input terminal for digital audio players.
It even has a digital input terminal with sampling rate converters so that you can use
components such as digital tuners.
Create the perfect sound space for your installation setting
Room Equalizer
The R-K1000 automatically optimizes the audio settings for your room layout and system
location.
You simply set up the microphone supplied with the R-K1000 in the listening position and then
start up the Room Equalizer.
Realistic audio playback with near-original sound
Supreme EX
Original Kenwood audio enhancement technology that reproduces the high-bandwidth
component in the original sound produces incredibly realistic audio that restores almost all
the nuances of the original performance.
This reproduces high-range bands of 20 kHz and higher from audio CD or digital input.
It also reproduces the high-range bands lost through data compression when you connect to
the CD player (DP-K1000 – sold separately) and play audio files (MP3/WMA/AAC).
Superb sound quality even at low volumes
Clear A Mode
The R-K1000 uses the “Clear A” mode to provide superb rich sound quality with excellent
balance even at low volumes. This mode is ideal when you are sitting very close to the set or in
situations where you want to keep the volume low, such as late-night listening.
Convenient and Easy to Use
System Control Function
The system control connection between the R-K1000 and the CD player (DP-K1000 – sold
separately) enables you to turn both units on and off jointly and use the R-K1000 remote
control for basic operations on the CD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
6
To ensure safety, read the items carrying
this marking carefully.
Contents
P.25
Procedures by Input Source
Before Using the
System
This chapter explains how to connect and use
the system with the different input sources.
• Receiving Broadcast Stations
• RDS (Radio Data System)
• External Components
• D.AUDIO
Be sure to read these precautions.
Safety Precautions……………………… 2
Before Applying Power …………… 2
IMPORTANT SAFETY INSTRUCTIONS
………………………………………… 3
Accessories ………………………………… 8
Installing the System ……………………… 9
Connecting the System ………………… 10
Component Names and Functions …… 16
How to Use This Manual………………… 20
Basic Operation ………………………… 22
Using CDs (DP-K1000 – sold separately)
P.37
Audio Settings
…………………………………………… 24
This chapter explains how to tailor the system
to your audio preferences.
• ROOM EQ (Room Equalizer)
• Digital Sound Equalizer
• Sound Presets
• Supreme EX
• Clear A
• BALANCE
P.51
Component Settings
This chapter explains how to select the settings
for the R-K1000.
• Setting the Time
• Setting the Timer
• Display Settings
• Auto Power Save (A.P.S.)
P.61
Maintenance
This chapter explains how to store and
maintain your system so that it continues to
give pleasure for many years to come.
• Messages
• Troubleshooting
• Care and Storage
• Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
English
7
Accessories
AM loop antenna
(1)
FM indoor antenna
(1)
Microphone for Room Equalizer
(Cord length: Approx. 5 m: 1)
Remote control
(RC-R0830E: 1)
Batteries for the remote control
(R03: 2)
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
8
Installing the System
Notes on installing the system
z Always install the system on a flat, stable surface. When installing the system on a stand of some sort, be sure to check the
strength of the stand.
z The magnets used in the speakers may cause color irregularities on TV or PC screens. Do not set up the speakers too close
to a TV or PC.
Main unit
COMPACT DISC PLAYER
STANDBY
TIMER
/
MP3
/
WMA / AAC PLAYBACK
Left speaker
CD player DP-K1000
(sold separately)
Right speaker
Observe the following cautions when installing the system. Insufficient heat radiation may
build up internal heat and cause a malfunction or fire hazard.
CAUTION
z Do not place an object that may hinder heat radiation on the system.
z Leave the spaces specified below around the cabinets of the main unit.
Top panel: 50 cm or more Back panel: 10 cm or more
z Install the CD player (DP-K1000 - sold separately) underneath the R-K1000.
Install the system so that the power outlet is easily accessible from the user, and unplug the
power cord from the power outlet immediately in case of a trouble.
Note that the power supply to the system is not shut down completely by simply setting the
power key to OFF.
To shut down the power supply completely, it is required to unplug the power cord.
Getting the best acoustic effect
The sound will vary depending on the positioning of the speakers. To get the best possible sound quality, note the guidelines
below.
z Ensure that the surroundings for the left and right speakers are as identical as possible. Set up the left and right speakers
away from the wall and hang thick curtains on any windows to minimize echoes or reverberation.
z Place the left and right speakers as far apart as possible.
z Position the speakers at the same height as your ears when you are using the system.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
9
Connecting the System
Ensure that all the cords are securely connected. Loose or incomplete connections may
result in noise interference or no sound at all.
Main Connections
Do not plug the AC power cord into an AC wall outlet until all the connections are completed.
Before disconnecting any cords or cables, always turn the main unit off and unplug the power cord
from AC wall outlet.
Caution for
connection
AM loop antenna
FM indoor antenna
1 Connect the lead to the [FM 75Ω] terminal.
2 Find the location that gives the best
reception.
3 Fix the antenna in place.
Connect the lead (black) to the
[ANTENNA M] terminal.
z The [ANTENNA M] terminal is
exclusively for the antenna. It is
not an earth terminal for safety
purpose.
Push into the
slot.
Room equalizer microphone
Connect this for ROOM EQ (Room
Equalizer) setup. Disconnect after
completing setup.
2
1
To AC wall
outlet
3
AC power cord
z Insert the plug firmly
all the way into the
AC wall outlet.
For more information,
see “Connecting Other
Accessories (Commercially
Available Units)”on P.13–15.
Right speaker
Left speaker
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
10
Connecting the System
If the system is connected correctly and still does not operate
normally or shows display errors, reset the microcomputer. (P.65)
Microcomputer malfunctions
1
Connecting the AM loop antenna
The antenna supplied with the system is for indoor use. Place it as far as possible away from the main unit, your
TV set, the speaker cords and the power cord and point it in the direction that gives the best reception.
z
Connecting the antenna cord
1
2
3
Place the AM antenna cord as shown on
the right and connect the lead (red) to the
right side of the [AM] terminal and the lead
(white) to the left side.
2
Connecting the FM indoor antenna
The antenna supplied with the system is a basic antenna for indoor use. For stable signal reception, the use
of an outdoor antenna (commercially available unit) is recommended. To connect an outdoor antenna, first
remove the indoor antenna.
3
Connecting the speakers
Never short-circuit the positive (+) and negative (–) ends of
the speaker cords. (Do not touch the + and – cords together.)
Mistakenly reversing the positive and negative polarity will
result in unnatural sound and unclear sound source (e.g. musical
instruments) locations.
Notes on connecting the
speaker cords
z
z
Preparing the ends of the speaker cords
Twist the plastic sleeve on the end of the cord as you
pull it off.
Connecting the speaker cords
1
2
3
4
Twist and remove
Loosen the knob
Insert the cord
Tighten the knob
Download from Www.Somanuals.com. All Manuals Search And Download.
English
11
Connecting the System
Connecting the CD Player (DP-K1000 – sold separately)
z When connecting a CD player, read the instruction manual for the DP-K1000 also.
z Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise interference
or no sound at all.
To AC wall outlet
AC power cord
z Insert the plug
firmly all the way
into the AC wall
outlet.
2
1
To AC wall outlet
DP-K1000
1
CD IN (COAX)
Use the coaxial cable supplied with the DP-K1000 to connect the [DIGITAL OUT COAXIAL] terminal on the DP-K1000 to the [CD
IN (COAX)] terminal on the rear panel of the R-K1000.
SYSTEM CONTROL
2
Use the system control cable supplied with the DP-K1000 to connect the [SYSTEM CONTROL] terminal on the DP-K1000 to the
[SYSTEM CONTROL] terminal on the rear panel of the R-K1000.
z To connect a CD player other than the DP-K1000 to the R-K1000, use an analog connection to connect the audio
output terminal on the CD player to the [AUX IN] terminal on the rear panel of the R-K1000. When using a digital
connection, connect the optical digital output terminal on the CD player to the [DIGITAL IN 1 (OPT)] or [DIGITAL
IN 2 (OPT)] terminal on the rear panel of the R-K1000. When connecting from a coaxial output terminal on the CD
player, use the [DIGITAL IN 3 (COAX)] terminal on the R-K1000.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
12
Connecting the System
Connecting Other Accessories (Commercially Available Units)
z When a related system component is connected, read the instruction manual for that component also.
z Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise interference
or no sound at all.
Since antenna installation necessitates skill and experience, always consult
your dealer before installation. The antenna should be placed at a distance
from the power distribution wires. Otherwise, an electric shock accident may
occur if the antenna falls down.
Caution for outdoor antenna
installation
PHONO IN
z You cannot connect a record player with an MC cartridge
directly to the main unit. Connect a dedicated equalizer
amplifier to the record player and then connect it to the
[AUX IN] terminal.
Connect record players with MM cartridges to the [PHONO
IN] terminal on the rear panel of the main unit.
z The [M] (earth) terminal is used to reduce noise
reduction when an analog record player is connected
to the system. It is not an earth terminal for safety
purposes.
z Record players with built-in equalizer amplifiers should
be connected to the [AUX IN] terminal.
Signal
earth lead
Audio OUT
Record player
(with MM cartridge)
D.AUDIO
Connect digital audio players to the [D.AUDIO] terminal on
the front panel of the main unit.
z If you connect a Kenwood player that supports digital
audio link using the dedicated cable, you can control the
player from the main unit and the remote control. (P.34) It
can be connected using a 3.5 mm stereo mini-plug cable
(commercially available unit).
Digital audio player
z When you are not using the digital audio player, unplug
the mini-plug cable from the main unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
13
Connecting the System
TAPE IN/OUT
Connect the audio output and audio input terminals on the
cassette deck to the [TAPE IN] and [TAPE OUT] terminals
respectively on the rear panel of the R-K1000.
Audio OUT
Audio IN
Cassette deck
AUX IN
Connect the audio OUT terminals on components such
as VCRs to the [AUX IN] terminal on the rear panel of the
R-K1000.
Audio OUT
VCR, etc.
DIGITAL IN 1, 2 (OPT)
Connect the optical digital output terminal on components
such as digital tuners to the [DIGITAL IN 1 (OPT)] or
[DIGITAL IN 2 (OPT)] terminal on the rear panel of the
R-K1000.
z Set the digital audio output on connected components
to “PCM”.
Optical digital output
(PCM signals)
Digital tuner, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
14
Connecting the System
DIGITAL IN 3 (COAX)
Connect the digital coaxial type output terminal on
components such as DVD players to the [DIGITAL IN 3
(COAX)] terminal on the rear panel of the R-K1000.
z Set the digital audio output on connected components
to “PCM”.
Coaxial type output
(PCM signals)
DVD player, etc.
PHONES
Plug headphones equipped with a 3.5 mm stereo mini-plug
into the [PHONES] jack on the front panel of the R-K1000.
z When you connect the headphones, sound from the
speakers is muted and the volume adjustment range is
from minus infinity (–∞) dB to 0 dB.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
15
Component Names and Functions
Main unit
Power (P.23)
Turns the unit on or off (Standby).
INPUT SELECTOR (P.23, 32)
Selects the input source (FM, AM, CD,
PHONO, TAPE, AUX, D.AUDIO, D-IN1,
D-IN2 or D-IN3).
Standby indicator
Red: Lights in Standby mode.
Orange: Lights in Timer Standby mode.
Display
(P.17)
VOLUME
(P.22)
Dial lighting
(P.58)
Remote sensor
(P.19)
P.CALL (P.26)
In Tuner mode: Recalls a stored
radio station.
D.AUDIO terminal (P.34)
Connects digital audio
components to this terminal.
Clear A/Indicator (P.49)
Selects the Clear A function.
Lights white when the Clear A function is selected.
PHONES jack (P.15)
Connects the headphones plug here.
Standby Mode
System Control Connection
While the Standby indicator on the main unit is lit, the unit is
using a very weak current to maintain the built-in memory.
This is called Standby mode. When the main unit is in this
mode, you can turn it on using the remote control.
If you use system control connection to connect a DP-K1000
(sold separately) to the R
follows:
-K1000, the R-K1000 operates as
z When you play a CD on the DP-K1000, input on the
R-K1000 automatically switches to CD and you can use
the R-K1000 remote control to control CD operations
on the DP-K1000.
z Operation is linked so that turning the R-K1000 on and
off turns the DP-K1000 on and off also.
z When the Dimmer, Display Saver and Auto Power
Save functions are set on the R-K1000, they run on the
DP-K1000 also.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
16
Component Names and Functions
Displays shown in this manual
may differ from the actual displays.
Display
Displays numbers and text.
Displays the FM or AM radio frequency or
the sampling frequency.
MHz
Flashes when the sound
is muted. (P.22)
Displays the FM reception frequency.
kHz
Displays the AM reception frequency.
Displays the digital input signal
sampling frequency.
Lights when Auto
Power Save (A.P.S.) is
set. (P.60)
Lights when
Supreme EX is set to
“ON”. (P.48)
Lights when the program
timer is set. (P.54–57)
Flashes when TONE is
set and lights when a
level other than level
0 is set. (P.42–44)
Lights when the sleep
timer is set. (P.53)
ST.
Lights when you are receiving a stereo broadcast.
(P.27)
TUNED
Lights when you are tuned to a radio station. (P.27)
AUTO
Lights during auto tuning. Turns off during manual
tuning. (P.27)
RDS
Lights when an RDS broadcast is received. (P.30)
Lights when ROOM EQ
setting is completed.
(P.38)
Download from Www.Somanuals.com. All Manuals Search And Download.
English
17
Component Names and Functions
Remote control keys with the same names as keys on the
main unit have the same functions as the main unit keys.
Remote control
Turns the unit on or off (Standby).
(P.23)
Sets Clear A.
(P.49)
Turns the unit on or off (Standby).
Turns the main unit on when the
Standby indicator on the main
unit is lit.
Sets the timer.
(P.53, 54–57)
Sets display settings. (P.58)
Sets the sound quality
or component.
Selects the information shown
on the display. (P.27, 32)
Sets the sound quality.
(P.38–49)
ENTER
Fixes a setting.
Tunes in to a station.
(P.27)
Stops playback. (P.24, 35)
Selects the radio station
selection mode. (P.27, 35)
Skips back or forward
through CD tracks. (P.24)
Selects the station.
(P.26, 29)
Selects the track.
(P.24, 35)
Adjusts the volume. (P.22)
Selects folders. (P.24, 35)
Selects input source.*
Starts playback.
(P.23, 32)
Performs PTY search. (P.31)
Clears the program settings.
(P.24)
Selects the CD playback
mode. (P.24)
One-touch Operation
The main unit features a convenient one-touch operation
function. When the main unit is Standby mode, you can turn
it on by pressing the selection keys for input source*.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
18
Component Names and Functions
Using the remote control
After plugging the main unit into the AC
wall outlet, press the power [K] key on
the remote control unit to turn the system
on.
Once the system is turned on, press the key
for the function you want to use.
Point the remote control at the remote
sensor when using it.
Approx.
6 m
Approx. 30°
Approx. 30°
z The remote control may not operate
correctly if direct sunlight or light from a
high-frequency fluorescent lamp (such
as an inverter type) is shining on the
remote sensor. If this happens, install
the main unit in a different location to
avoid this sort of malfunction.
Loading the remote control batteries
1 Remove the
2 Load the R03 batteries
3 Close the battery
battery cover.
supplied with the system.
cover.
z Check the polarity of the
batteries (U, V) when
loading them.
z The batteries supplied with the system are only for operation checking and may only last for a short
time.
z When replacing the batteries, always load 2 new batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
19
How to Use This Manual
Operation procedure
Whilethissystemcanbecontrolled
from either the remote control or
the main unit, the explanations
in this manual primarily describe
operation procedures using the
remote control.
Receiving Broadcast Stations
Presetting Stations Automatically (AUTO MEMORY)
z
z
Up to 40 stations can be preset in the system.
For use of the RDS function, stations must be memorized by AUTO MEMORY.
Press the [MODE] key.
1
ꢀꢁꢂꢃꢄꢅ
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Select “AUTO MEMORY”.
2
ROOM EQ
MODE
SOUND
PRESET
Press the [A] or [B] key.
Remote control keys
used in the procedure
z
z
“AUTO MEMORY” flashes on the display
and the receivable radio stations are preset
automatically.
ENTER
TUNING
A preset frequency can be rewritten later.
VOL
P.CALL
AUTO MONO
/
Press the [ENTER] key.
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
z
z
z
RDS stations are given priority during auto presetting. If there is memory left
after presetting, this unit continues presetting regular FM and AM stations.
broadcast station that cannot be preset with AUTO MEMORY should be set
CLEAR
RANDOM
REPEAT
P.MODE
ꢀꢁꢂꢀꢃꢄꢅꢃꢆ
A
with Manual preset. (P. 29)
Auto Memory setup may take a few minutes to complete.
Display shown during
or after an operation
z
The displays shown in this instruction
manual may differ from the actual
displays.
R-K1000
28
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
20
How to Use This Manual
Operation icons
Explanations of
main unit procedures
Explains the procedure for the radio.
Explains the procedures for external
components.
Explanations of remote
control procedures
Explains the procedure for digital
audio players.
Related functions that
may also be helpful
Explains how to set the sound quality.
Explains how to set up component
units.
External Components
z
z
Connecting Other Accessories (Commercially Available Units) R P.13–15
Audio Settings R P.37 onwards
Related
Information
Explains how to carry out system
maintenance.
Adjusting the External Component Input Level
Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
Select the input source to adjust the input level.
1
Turn the [INPUT SELECTOR] knob and select the
input source to adjust the input level.
ꢀꢁꢂꢃꢄꢅ
z
You can set the input level for each of PHONO, TAPE and AUX.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [MODE] key.
2
3
ENTER
TUNING
Select “INPUT LEVEL”.
Press the [A] or [B] key.
VOL
P.CALL
AUTO MONO
/
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
Press the [ENTER] key.
ꢀꢁꢂꢀꢃꢄꢅꢃꢆ
Set the input level.
Press the [A] or [B] key.
4
z
You can adjust the input level in
range from –3 to +5.
a
Press the [ENTER] key.
z
If you adjust the input level for PHONO or AUX, the output level from the
[TAPE OUT] terminal will also change.
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
English
21
Basic Operation
This section describes some basic procedures for using the system, such as turning the unit on or off, selecting
input source, and adjusting the volume.
Check the connections. (P.10–15)
Have the remote control ready. (P.19)
Preparations
2
2
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
nAdjusting the volume
Lowers the
volume
Raises the
volume
Raises the volume
VOL
Lowers the volume
n Mute
l Press this key again to unmute the
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
22
Basic Operation
Turn the system on (off).
1
2
z You can also turn the R-K1000 on by pressing [BAND],
[D.AUDIO], [CD], [AUX], [PHONO], [TAPE], [D-IN1],
[D-IN2] or [D-IN3] on the remote control.
z Pressing the power [K] key when the unit is on turns it
off (Standby mode).
Select the input source.
Turn the [INPUT SELECTOR] knob to select the input source to be used for playback.
Press the selection key for the input source.
TUNER
BAND
D.AUDIO
CD
TAPE
D-IN3
AUX
PHONO
D-IN2
D-IN1
z See “Procedures by Input Source” (P.25–36) for the operation procedures for each input
source.
z You can set your preferred sound quality. See “Audio Settings”(P.37–50) for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
23
Using CDs (DP-K1000 – sold separately)
When a DP-K1000 (sold separately) is connected to the R-K1000, you can use the R-K1000
remote control to play CDs.
Skipping forward/back
Hold down the [I] or [J] key.
Skipping tracks, skipping back, skipping to the start
ClearA
To skip to the previous or next track: Press the [G] or [H] key.
To return to an earlier track:
Press the [G] key two or more times in
succession.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
To return to the beginning of a track: Press the [G] key once.
ROOM EQ
MODE
SOUND
PRESET
Stopping playback
ENTER
Press the [F] key.
TUNING
VOL
P.CALL
AUTO / MONO
Pausing and resuming playback
TUNER
D.AUDIO
CD
BAND
MUTE
Press the [CDE] key.
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Selecting the CD playback mode
CLEAR
RANDOM
REPEAT
P.MODE
Random playback: Press the [RANDOM] key and light “RANDOM”.
Repeat playback: Press the [REPEAT] key and light “REPEAT”.
Program playback: Press the [P.MODE] key and light “PGM”.
Folder playback: Press the [P.MODE] key and light “N”.
RC-R0830E
Selecting the track (Program)
Use the [G] or [H] key to select the track and then press the [ENTER]
key.
To clear the program settings: Press the [CLEAR] key.
Selecting the folder (When Folder playback is selected)
For MP3/WMA/AAC files
To go to the previous folder, press the [FOLDER O] key.
To go to the next folder, press the [FOLDER P] key.
For MP3/WMA/AAC files
z When you stop playback by pressing the [F] key, the track being played
is stored and pressing the [CDE] key restarts playback from the
beginning of that track. (Resume function)
z The Resume function also works if you switch to another input source
during playback.
z To cancel the resume function, press the [F] key twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
24
Procedures by Input Source
This chapter explains the operation procedures for each input
source.
For information on the sound quality settings and component
settings regardless of the input source, see “Audio Settings” (P.37)
and “Component Settings” (P.51).
If an error is displayed or a problem arises, see “Maintenance”
(P.61).
Receiving Broadcast Stations
• Listening to FM/AM Radio ………………………………… 26
• Presetting Stations Automatically (AUTO MEMORY) ……… 28
• Presetting Stations Manually (Manual Preset) …………… 29
RDS (Radio Data System)
• PS (Program Service) Name Display ……………………… 30
• Searching for a Desired Program Type (PTY Search) ……… 31
External Components
• Playback from External Components ……………………… 32
• Adjusting the External Component Input Level…………… 33
D.AUDIO
• Playback from a Digital Audio Player ……………………… 34
• Adjusting the Digital Audio Player Input Level …………… 36
Download from Www.Somanuals.com. All Manuals Search And Download.
English
25
Receiving Broadcast Stations
This section explains how to listen to the FM/AM radio and set radio stations.
Listening to FM/AM Radio
z Simply pressing the [TUNER/BAND] key turns on the system and allows you to listen to
the radio.
Press the [TUNER/BAND] key to select “FM” or “AM”.
Each time you press the key, the band switches between “FM”and “AM”.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Select a station.
2
ENTER
Choosing from stored stations (Preset Call)
TUNING
Select a station that you have stored.
VOL
P.CALL
AUTO / MONO
z See P.28, 29 for more information on presets.
TUNER
D.AUDIO
CD
BAND
MUTE
„ Selection with the [P.CALL] keys
AUX
PHONO
D-IN2
TAPE
D-IN3
Each time you press the [G] or [H] key (
) or the [B] or [A] key
D-IN1
(
), the tuning changes to the next stored station in sequence.
CLEAR
RANDOM
REPEAT
P.MODE
When you hold down the [G] or [H] key (
) or the [B] or [A] key
(
), the tuning changes to the next stored station in sequence at intervals
RC-R0830E
of approximately 0.5 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
26
Receiving Broadcast Stations
z Presetting Stations Automatically (AUTO MEMORY) R P.28
z Presetting Stations Manually (Manual Preset) R P.29
z Audio Settings R P.37 onwards
Related
Information
Choosing from stations that are not stored (Auto/Manual tuning)
1
Select Auto tuning or Manual tuning.
Press the [AUTO/MONO] key.
The mode changes as shown below each time you press the key.
AUTO lit
Auto tuning
(Select this mode when
reception is good.)
AUTO unlit
Manual tuning
(Select this mode when
reception is poor.)
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
2 Select a station.
ENTER
Press the TUNING [I]/[J] key.
TUNING
When the station is tuned, “TUNED“ lights up on the display. If
you are receiving a stereo signal, “ST.”also lights up.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
„ Using Auto tuning
BAND
MUTE
The radio automatically tunes in to the next station each time you press
the key. Repeat this step until you are tuned in to your preferred station.
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
„ Using Manual tuning
CLEAR
RANDOM
REPEAT
P.MODE
Press the key until the desired station is tuned or until you reach the
desired frequency.
RC-R0830E
z There is no sound while Auto/Manual tuning is in progress.
z Auto tuning provides stereo reception while manual tuning provides
monaural reception.
z The display changes as shown below each time you press the
[DISPLAY] key.
FM:
Program service name R Preset No. R Day/Clock
AM or when the program service name is not stored:
Preset No. R Day/Clock (AM)
Preset No. R“NO PS”R Day/Clock (non-RDS)
Download from Www.Somanuals.com. All Manuals Search And Download.
English
27
Receiving Broadcast Stations
Presetting Stations Automatically (AUTO MEMORY)
z Up to 40 stations can be preset in the system.
z For use of the RDS function, stations must be memorized by AUTO MEMORY.
Press the [MODE] key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Select “AUTO MEMORY”.
2
ROOM EQ
MODE
SOUND
PRESET
Press the [A] or [B] key.
z “AUTO MEMORY” flashes on the display
and the receivable radio stations are preset
automatically.
ENTER
TUNING
z A preset frequency can be rewritten later.
VOL
P.CALL
AUTO / MONO
Press the [ENTER] key.
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
z RDS stations are given priority during auto presetting. If there is memory left
CLEAR
RANDOM
REPEAT
P.MODE
after presetting, this unit continues presetting regular FM and AM stations.
RC-R0830E
z A broadcast station that cannot be preset with AUTO MEMORY should be set
with Manual preset. (P. 29)
z Auto Memory setup may take a few minutes to complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
28
ReceivingBroadcastStations
Presetting Stations Manually (Manual Preset)
Select a desired station.
1
z Receive a station with either Auto Tuning or Manual Tuning. (P.27)
z To memorize an RDS station, wait for the station name to appear on the
display before carrying out step 2.
ClearA
Press the [ENTER] key.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
2
The preset number flashes.
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
Select the desired preset number (P01 to P40).
TUNER
D.AUDIO
CD
3
4
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
„ Selection with the [P.CALL] keys
Press the [G] or [H] key.
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
The selected preset number is displayed.
RC-R0830E
z If the selected preset number
already stores a station, the existing
station will be overwritten by the
newly selected station.
Press the [ENTER] key.
z To preset other stations, repeat steps 1 to 4 for each of them.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
29
RDS (Radio Data System)
This system is designed for RDS reception, it can extract the information from the broadcast signal for use
with various functions such as automatic display of the station name.
z Select the FM band.
z Preset RDS stations with the AUTO MEMORY function. (P.28)
PS (Program Service) Name Display
When an RDS broadcast is received, the station name is automatically
ClearA
displayed.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
z The“RDS”lights up when an RDS broadcast (signal)
is received.
ROOM EQ
MODE
SOUND
PRESET
ENTER
„ To switch the displays
TUNING
Press the [DISPLAY] key.
VOL
P.CALL
AUTO / MONO
z The mode changes as shown below each time you press the key.
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
Day/Clock
PS (Program Service Name)
Preset Number
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
z Some stations may not be provided or be given different names depending on
countries or areas.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
30
RDS (Radio Data System)
Searching for a Desired Program Type (PTY Search)
The tuner automatically searches for a station which is currently
broadcasting a specified program type (genre).
Press the [PTY] key.
1
z When an RDS broadcast is received, the program type is shown on the
display. If no PTY data is available, or if the station is not an RDS station,
“None”is displayed.
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Press the [A] or [B] key to select the desired
program type.
ROOM EQ
MODE
SOUND
PRESET
2
ENTER
z Use program type table for your convenience.
TUNING
Program type table
VOL
P.CALL
AUTO / MONO
Program Type Name Display
Program Type Name Display
Pop Music
Rock Music
Easy Listening Music Easy M
Light Classical
Serious Classical
Other Music
News
Pop M
Rock M
Weather
Finance
Children’s programs
Social Affairs
Religion
Weather
Finance
Children
Social
Religion
Phone In
Travel
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
Light M
Classics
Other M
News
D-IN1
Phone In
Travel
CLEAR
RANDOM
REPEAT
P.MODE
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Affairs
Info
Sport
Educate
Drama
Culture
Science
Varied
Leisure
Leisure
Jazz
Country
Nation M
Oldies
RC-R0830E
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentaty
Folk M
Document
Press the [ENTER] key.
3
z No sound is heard while “PTY” is
flashing.
z If a program of the desired type
is found, that program is received
and the frequency display changes
to the station name display.
„ To cancel the PTY search
Press the [PTY] key.
z If a program of the desired type cannot be found,“NO PROGRAM”flashes,
then after several seconds the display returns to the original display.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
31
External Components
You can play tracks by connecting external components to the system.
Playback from External Components
Connect the external component to the system as described in “Connecting
Other Accessories (Commercially Available Units)” (P.13–15).
z When connecting external components, always turn this system and the external
components off beforehand.
z Refer also to the instruction manual for the external component to be connected.
Select the input source to be used for playback.
1
Turn the [INPUT SELECTOR] knob to select the input
ClearA
source to be used for playback.
The input source changes as shown below each time you press the key.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
FM
AM
CD
PHONO
TAPE
AUX
ROOM EQ
MODE
SOUND
PRESET
D-IN3
D-IN2
D-IN1
D.AUDIO
ENTER
TUNING
z When
a
digital component is
VOL
selected, the input signal sampling
frequency is displayed.
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
The R-K1000 will play PCM (32 kHz
– 96 kHz) digital signals.
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Begin playback on the connected external component.
Begin playback using the controls on the connected external component.
2
3
Adjust the volume level.
z Thedisplaychangesasshownbeloweachtimeyoupressthe[DISPLAY]key.
When “D.AUDIO”, “PHONO”, “TAPE” or “AUX” is selected:
Selected input source
When “CD”, “D-IN1”, “D-IN2” or “D-IN3” is selected:
Selected input source/Sampling frequency Day/Clock
Day/Clock
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
32
External Components
z Connecting Other Accessories (Commercially Available Units) R P.13–15
Related
z Audio Settings R P.37 onwards
Information
Adjusting the External Component Input Level
Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
Select the input source to adjust the input level.
1
Turn the [INPUT SELECTOR] knob and select the
input source to adjust the input level.
ClearA
z You can set the input level for each of PHONO, TAPE and AUX.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [MODE] key.
2
ENTER
TUNING
Select “INPUT LEVEL”.
Press the [A] or [B] key.
VOL
3
P.CALL
AUTO MONO
/
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
Press the [ENTER] key.
RC-R0830E
Set the input level.
Press the [A] or [B] key.
4
z You can adjust the input level in a
range from –3 to +5.
Press the [ENTER] key.
z If you adjust the input level for PHONO or AUX, the output level from the
[TAPE OUT] terminal will also change.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
33
D.AUDIO
You can connect a Kenwood digital audio player (referred to hereafter simply as “digital audio player”) to
the system and use it to play tracks.
Playback from a Digital Audio Player
Use this procedure to connect a digital audio player to the system and use it
to play tracks.
z When connecting the digital audio player, always turn this system and the digital audio
player off beforehand.
z Refer also to the instruction manual for the digital audio player to be connected.
z Connecting the digital audio player using the dedicated cable allows you to operate the
digital audio player using the main unit or the remote control.
Compatible Kenwood digital audio players
HDD audio player
HD20GA7
Memory audio player
M1GC7
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Connect the digital audio player to the [D.AUDIO] terminal
on the front panel of the main unit.
1
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
Turn on the digital audio player.
2
3
RC-R0830E
Press the [D.AUDIOE] key to begin playback.
z Simply pressing the [D.AUDIOE] key turns on the system and begins
playback.
z If the digital audio player is not connected using the dedicated cable, use the
controls on the connected digital audio player.
z If you use the dedicated cable for the connection, the volume and sound quality
settings on the digital audio player are disabled.
z When you have finished using the digital audio player, disconnect the player’s
connection cable from the [D.AUDIO] terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
34
D.AUDIO
z Adjusting the Digital Audio Player Input Level R P.36
Related
z Audio Settings R P.37 onwards
Information
„ Operations during digital audio player playback
Playing the tracks in the previous/next folder
To go to the previous folder, press the [FOLDER O] key.
To go to the next folder, press the [FOLDER P] key.
z
These functions may not work with some digital audio player
models.
Skipping forward/back
ClearA
Hold down the [G] or [H] key.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Pausing and resuming playback
ENTER
Press the [D.AUDIOE] key.
TUNING
VOL
P.CALL
AUTO / MONO
Stopping playback
TUNER
D.AUDIO
CD
BAND
MUTE
Press the [F] key.
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
Skipping tracks/ skipping back/ skipping to the start
RC-R0830E
Skip a track
Press the [H] key.
Skip back to the previous track
Press the [G] key two or more times in succession.
Return to the start of the track
Press the [G] key once.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
35
D.AUDIO
Adjusting the Digital Audio Player Input Level
Use the procedure below to adjust the input level for the external
component connected to the [D.AUDIO] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
Press the [D.AUDIO E] key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Press the [MODE] key.
2
ROOM EQ
MODE
SOUND
PRESET
ENTER
Select “INPUT LEVEL“.
Press the [A] or [B] key.
3
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Press the [ENTER] key.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Set the input level.
Press the [A] or [B] key.
4
z You can adjust the input level in a range
from –3 to +5.
Press the [ENTER] key.
z If you adjust the input level for D.AUDIO, the output level from the [TAPE OUT]
terminal will also change.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
36
Audio Settings
Use the procedures in this chapter to specify the sound quality
settings for your stereo system.
These procedures allow you to set up the Room Equalizer
function, which will measure the acoustic characteristics of your
room and optimize the system’s acoustic effects. You can also use
the system’s digital sound equalizer function to customize the
sound to your own preferences.
ROOM EQ (Room Equalizer)
• Automatically Setting the Acoustic Effects for the Room
(ROOM EQ) ………………………………………………… 38
• Matching the Acoustic Effect to the Conditions…………… 41
Digital Sound Equalizer
• Adjusting the Range Levels (TONE)………………………… 42
Sound Presets
• Registering Sound Effects ………………………………… 45
• Using Sound Presets ……………………………………… 46
• Disabling Equalizer Effects (FLAT) ………………………… 47
Supreme EX
• Setting Supreme EX ………………………………………… 48
Clear A
• Setting Clear A ……………………………………………… 49
BALANCE
• Adjusting the Speaker Volume Balance …………………… 50
Download from Www.Somanuals.com. All Manuals Search And Download.
English
37
ROOM EQ
(Room Equalizer)
The system measures the test signal emitted from the speakers using the microphone supplied with the
system and automatically sets the optimum acoustic effect for the size of the room and the location in
which the stereo is installed. You can also combine this with the TONE effects.
Automatically Setting the Acoustic Effects for the Room (ROOM EQ)
The system measures the acoustic characteristics using the microphone
supplied with the system and automatically sets the following acoustic
effects:
z The sound delay from speakers
z The volume level difference between the left and right speakers
z The speaker frequency characteristics and the acoustic
characteristics in the room
The speakers emit a
very loud test signal
during the measurement.
Carefully consider
the impact on your
neighbors and on
children, particularly at
night.
Do not place obstacles
between the speakers and the
microphone.
Measurement
The effect of the Room Equalizer function
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
38
ROOM EQ (Room Equalizer)
Plug the room equalizer microphone supplied with
the system into the [ROOM EQ MIC IN] jack on the rear
panel of the main unit.
1
2
See “Main Connections”(P.10) for details.
Place the microphone in the listening position (at ear
level).
Do not place any obstacles between the microphone and speakers during
measurement.
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Press the [MODE] key.
3
4
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
Select “ROOM EQ”.
Press the [A] or [B] key.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Press the [ENTER] key.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Press the [ENTER] key.
5
z During setup, “R.EQ SETUP” appears on the display and “ROOM EQ”
flashes.
When setup is completed, “ROOM EQ”stops flashing and remains lit.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
39
ROOM EQ (Room Equalizer)
Canceling automatic setup
If you press the [MODE] key during automatic setup, the“R.EQ CANCEL?”message appears.
If you press the [ENTER] key, “R.EQ CANCEL”is displayed and setup is canceled.
Pressing the [VOL] key also cancels automatic setup.
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
„ Temporarily canceling the characteristics set automatically
ROOM EQ
MODE
SOUND
PRESET
1Press the [MODE] key.
2Press the [A] or [B] key to select “ROOM EQ”.
3Press the [ENTER] key.
ENTER
TUNING
4Press the [A] or [B] key to select “R.EQ OFF”.
5Press the [ENTER] key.
VOL
P.CALL
AUTO MONO
/
TUNER
D.AUDIO
CD
BAND
MUTE
„ Restoring canceled characteristics
AUX
PHONO
D-IN2
TAPE
D-IN3
1Press the [MODE] key.
D-IN1
2Press the [A] or [B] key to select “ROOM EQ”.
3Press the [ENTER] key.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
4Press the [A] or [B] key to select “R.EQ CALL”.
5Press the [ENTER] key.
z Automatic setup takes about 1 minute to complete.
z If the room equalizer microphone is not connected, or if headphones are
connected, the “CAN’T SETUP”message appears and measurement fails.
z Always disconnect the microphone from the main unit once measurement is
completed.
z Depending on the conditions in which the system is used, the effects of the
Room Equalizer may not be clearly apparent.
z Do not perform other operations during automatic setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
40
ROOM EQ (Room Equalizer)
z Sound Presets R P.45
Related
Information
Matching the Acoustic Effect to the Conditions
Carry out the “ROOM EQ” (P.38) procedure beforehand. This
procedure then allows you to select the sound mode based on
the selected sound effect and your listening conditions.
Press the [ROOM EQ MODE] key.
1
2
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [A] or [B] key to select the sound mode.
ENTER
The display changes as shown below.
TUNING
This mode faithfully reproduces the results of
the ROOM EQ measurements.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
This mode allows you to enjoy music with no
discernible loss of quality over a relatively wide
area centered around the measurement position.
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
This mode enhances the reproduction of
highly melodic music when you are listening
at low volumes, as with late-night listening.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
This mode creates an environment with complex
reverberations, similar to a concert hall.
This mode provides enhanced reproduction
of vocals and speech.
Press the [ENTER] key.
3
z “ROOM EQ”does not appear and“ROOM EQ MODE”will not work prior to
automatic setup or when “R.EQ OFF”is selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
41
Digital Sound Equalizer
This system features a Digital Sound Equalizer function that uses DSP-based digital processing.
This provides more detailed settings that allow you to adjust the sound to your own preferences.
Adjusting the Range Levels (TONE)
Use this feature to adjust low-, mid- and high-range tones. By
choosing one of 3 frequencies (TURN OVER) for each tone range
and then setting the levels, you can adjust the tones to match your
preferences. You can also combine this with the ROOM EQ effects.
Variable frequencies
Level adjustment
(TURN OVER setting)
LEVEL (dB)
LEVEL (dB)
Variability
Frequency
Frequency
Variability
Frequency
Variability
Frequency
Variability
Frequency
Press the [TONE] key.
z “TONE”flashes while setting is in progress.
1
2
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Press the [C] or [D] key to select the frequency of the low
tones (BASS) you want to adjust (60 Hz, 100 Hz, 150 Hz).
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
Adjust the low tones (BASS) level by pressing the [A] or
[B] key.
BAND
MUTE
3
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
z While the“TONE”is flashing, you can adjust
CLEAR
RANDOM
REPEAT
P.MODE
the level through a range from –6 to +6.
RC-R0830E
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
42
Digital Sound Equalizer
z Sound Presets R P.45
Related
Information
Press the [ENTER] key.
4
5
ClearA
Press the [C] or [D] key to select the frequency of the
mid tones (MID) you want to adjust (1 kHz, 2 kHz,
3 kHz).
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
Adjust the mid tones (MID) level by pressing the [A]
or [B] key.
6
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
z While the “TONE” is flashing, you
can adjust the level through a range
from –6 to +6.
RC-R0830E
Continued to next page
Download from Www.Somanuals.com. All Manuals Search And Download.
English
43
Digital Sound Equalizer
Press the [ENTER] key.
7
8
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Press the [C] or [D] key to select the frequency of the high
tones (TREBLE) you want to adjust (5 kHz, 7 kHz, 10 kHz).
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
Adjust the high tones (TREBLE) level by pressing the [A] or
[B] key.
9
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
z While the“TONE”is flashing, you can adjust
the level through a range from –6 to +6.
RC-R0830E
Press the [ENTER] key.
10
z If you set a level other than 0, the “TONE”lights.
z If you do not need to adjust all the range levels, press the [TONE] key to end the
settings after you have finished the range level adjustments you want to make.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
44
Sound Presets
You can register up to 3 of the sound effects you have set as Sound Presets.
You can then recall and apply the registered Sound Presets simply by pressing the [SOUND
PRESET] key.
Registering Sound Effects
You can register up to 3 of the sound effects you have set using ROOM
EQ, ROOM EQ MODE or TONE.
z First use ROOM EQ (P.38), ROOM EQ MODE (P.41) or TONE (P.42) to set a sound
effect.
Press the [MODE] key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Select “SOUND PRESET”.
Press the [A] or [B] key.
2
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
Press the [ENTER] key.
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Select a Sound Preset number (1–3).
Press the [A] or [B] key.
CLEAR
RANDOM
REPEAT
P.MODE
3
RC-R0830E
z The selected preset number
flashes.
Press the [ENTER] key.
z The registered Sound Preset number lights and the sound effect currently
set is registered.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
45
Sound Presets
Using Sound Presets
Use this procedure to recall and apply a registered Sound Preset.
z Register the sound effect you want to use as a Sound Preset beforehand. (P.45)
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [SOUND PRESET] key.
1
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
Select a Sound Preset number (1–3).
Press the [A] or [B] key.
2
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Press the [ENTER] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
46
Sound Presets
Disabling Equalizer Effects (FLAT)
ClearA
Press the [FLAT] key.
1
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
z The “TONE” levels are set to 0 and “NORMAL” is set in “ROOM EQ MODE”
ENTER
and the TURN OVER settings also revert to their default values.
TUNING
z Press the [FLAT] key again to restore the original settings.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Download from Www.Somanuals.com. All Manuals Search And Download.
English
47
Supreme EX
Supreme EX is Kenwood’s original sound quality enhancement technology and is used for playing CDs
and audio files or for playback using components connected to a digital input terminal.
Setting Supreme EX
Press the [MODE] key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Select “SUPREME SET”.
Press the [A] or [B] key.
2
3
ROOM EQ
MODE
SOUND
PRESET
z The “SPRM EX”flashes.
ENTER
TUNING
Press the [ENTER] key.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
Select “ON” or “OFF”.
Press the [A] or [B] key.
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
z “SPRM EX” lights when “SUPREME ON” is
set and turns off when “SUPREME OFF” is
set.
RC-R0830E
Press the [ENTER] key.
z The Supreme EX function operates when “CD”, “D-IN1”, “D-IN2” or “D-IN3” is
selected.
z Even when “CD”, “D-IN1”, “D-IN2”or “D-IN3”is selected, “SPRM EX”does not light if
the input signal frequency is 96 kHz or 88.2 kHz.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
48
Clear A
Clear A mode allows you to enjoy superb rich sound quality even at low volumes.
This function is particularly useful for situations when you want to keep the volume low, such as late-
night listening.
Setting Clear A
Press the [Clear A] key.
1
Press the [Clear A] key.
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
z The volume adjustment range changes to minus infinity (–∞) dB to 0 dB.
ENTER
TUNING
„ To cancel the Clear A function
VOL
P.CALL
AUTO / MONO
Press the [Clear A] key.
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
z The volume adjustment range reverts to minus infinity (–∞) dB
CLEAR
RANDOM
REPEAT
P.MODE
to +8 dB.
RC-R0830E
z The Clear A function does not work while headphones are connected.
z When“CLEAR A ON”is set, the volume can be adjusted in half the normal
increments.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
49
BALANCE
Use this procedure to adjust the volume balance for the left and right speakers.
Adjusting the Speaker Volume Balance
Press the [MODE] key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Select “BALANCE”.
Press the [A] or [B] key.
2
3
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
Press the [ENTER] key.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Adjust the balance.
Press the [A] or [B] key.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Press the [ENTER] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
50
Component Settings
As well as the basic time settings, this chapter explains various
functions that make the system easier to use, such as the timer
and display settings.
Setting the Time …………………………………52
Setting the Timer
• Setting the Sleep Timer (SLEEP) …………………………… 53
• Setting the Program Timer (PROGRAM) …………………… 54
Display Settings
• Setting the Display Brightness (DIMMER) ………………… 58
• Turning the Display Saver ON/OFF ………………………… 59
Auto Power Save (A.P.S.) …………………………60
Download from Www.Somanuals.com. All Manuals Search And Download.
English
51
Setting the Time
Set the system clock to the correct time. If you use the Program Timer for playback when the time is not
set correctly, you will not be able to run the program at the correct time.
Press the [MODE] key.
1
Select “TIME ADJUST”.
Press the [A] or [B] key.
2
Press the [ENTER] key.
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Set the day of the week.
Press the [A] or [B] key.
3
4
ENTER
Press the [ENTER] key.
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
Set the time.
Press the [A] or [B] key.
D-IN1
Set the “hour”.
z The “hour”flashes.
CLEAR
RANDOM
REPEAT
P.MODE
Press the [ENTER] key.
RC-R0830E
Press the [A] or [B] key.
Set the “minute”.
z The “minute”flashes.
Press the [ENTER] key.
z The set day and time are displayed.
z If you make a mistake with the settings, press the [C] or [D] key to move the
cursor and re-enter the settings.
z If there is a power failure or the system is unplugged from the wall outlet for
some time, set the time again.
z Pressing the [F] key while the system is in the Standby mode will display the
time for 5 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
52
Setting the Timer
The system features the Sleep Timer, which automatically turns the system off after a set interval, and the
Program Timer, which starts playback at a specified time.
Setting the Sleep Timer (SLEEP)
This function automatically turns the system off after a set interval.
You can set an interval between 10 and 90 minutes in 10-minute
increments until the system is turned off.
Press the [SLEEP] key.
The interval increases by 10 minutes each time you press the key.
The setting after 90 minutes turns the timer off.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
10
20
90
30
80
40
70
50
60
ROOM EQ
MODE
SOUND
PRESET
Off
(“Q”unlit)
ENTER
During Sleep Timer setting
TUNING
VOL
P.CALL
Time set
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
Sleep Timer indicator
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
z While the Sleep Timer is running, you can check the remaining time by
CLEAR
RANDOM
REPEAT
P.MODE
pressing the [SLEEP] key.
RC-R0830E
„ To cancel the Sleep Timer
Press the power [K] key to turn the system off (Standby) or
press the [SLEEP] key so that “Q”is no longer displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
53
Setting the Timer
Setting the Program Timer (PROGRAM)
This function allows you to use the timer to automatically start playback at
a specified time. You can set two timers (PROG. 1 and PROG. 2) at the same
time. You can use the timer to activate CD, radio or external component.
ClearA
z Set the system’s clock to the correct time beforehand. (P.52)
z Separate the times for PROG. 1 and PROG. 2 by at least 1 minute to ensure that their
operating times do not overlap.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [MODE] key.
1
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
Select “TIMER SET”.
Press the [A] or [B] key.
2
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
Press the [ENTER] key.
RC-R0830E
Select “PROG. 1” or “PROG. 2”.
Press the [A] or [B] key.
3
Press the [ENTER] key.
Select “ON” or “OFF”.
Press the [A] or [B] key.
4
z Selecting “OFF” ends the procedure and
restores the original display.
Press the [ENTER] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
54
Setting the Timer
z Setting the Time R P.52
Related
Information
Select the day (or days) on which the Program Timer will run.
Press the [A] or [B] key.
5
The setting changes as shown below each time you press the key.
EVERYDAY
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
SAT-SUN
TUE-SAT
MON-FRI
SATURDAY
FRIDAY
ClearA
Press the [ENTER] key.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
z If you selected “EVERYDAY”, “MON-FRI”, “TUE-SAT” or “SAT-SUN”, proceed
to step 7.
ROOM EQ
MODE
SOUND
PRESET
Select “EVERY WEEK” or “ONETIME”.
Press the [A] or [B] key.
6
7
ENTER
TUNING
z The timer runs every week.
VOL
P.CALL
AUTO MONO
/
TUNER
D.AUDIO
CD
BAND
MUTE
z The specified timer runs once only.
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Press the [ENTER] key.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Specify the “ON” (start time) setting.
Press the [A] or [B] key.
Set the “hour”.
z The “hour”flashes.
Press the [ENTER] key.
Press the [A] or [B] key.
Set the “minute”.
z The “minute”flashes.
Press the [ENTER] key.
Specify the “OFF” (end time) setting.
8
Press the [A] or [B] key.
Set the “hour”.
z The “hour”flashes.
Press the [ENTER] key.
Press the [A] or [B] key.
Set the “minute”.
z The “minute”flashes.
Press the [ENTER] key.
Continued to next page
Download from Www.Somanuals.com. All Manuals Search And Download.
English
55
Setting the Timer
Select “PLAY” or “AI PLAY”.
Press the [A] or [B] key.
9
z Playback is at the volume set in step 11.
ClearA
z Playback begins at the specified time and
the volume gradually increases to the level
set in step 11.
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [ENTER] key.
ENTER
Select “CLEAR A ON” or “CLEAR A OFF”.
Press the [A] or [B] key.
TUNING
10
11
VOL
P.CALL
AUTO MONO
/
TUNER
D.AUDIO
CD
z The volume adjustment range changes to
0 dB to minus infinity (–∞) dB.
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
z The volume adjustment range changes to
minus infinity (–∞) dB to +8 dB.
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Press the [ENTER] key.
Set the volume.
Press the [A] or [B] key.
Press the [ENTER] key.
z You cannot use the [VOL] key to set the volume.
z You can also confirm the settings in steps 4 to 11 by pressing the [D] key instead
of the [ENTER] key. Also, pressing the [C] key returns you to the previous setting
and allows you to specify that setting again.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
56
Setting the Timer
Select the input source.
Press the [A] or [B] key.
12
The input source changes as shown below each time you press the key.
TUNER CD TAPE AUX
ClearA
D-IN3
D-IN2
D-IN1
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
Press the [ENTER] key.
ENTER
z If you select an input source other than “TUNER”, this completes the
settings and “COMPLETE” is displayed briefly, after which the original
display reappears.
TUNING
VOL
P.CALL
AUTO / MONO
z If you select “TUNER”, use the [A] or [B] to select a preset number and
then press the [ENTER] key. This completes the settings and“COMPLETE”
is displayed briefly, after which the original display reappears.
TUNER
D.AUDIO
CD
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
Press the power [K] key to turn the power OFF.
The Standby indicator on the main unit lights orange.
CLEAR
RANDOM
REPEAT
P.MODE
13
RC-R0830E
z If the indicator lights red, set the clock to the correct time.
„ To cancel (off) or reset (on) the timer
z When the system is turned on, press the [TIMER] key.
The setting changes each time you press the [TIMER] key.
lit
lit
PROG. 1 set to on
PROG. 2 set to on
unlit
lit
Timer off
PROG. 1 and 2 set to
on
z If there has been a power failure or the system was unplugged
from the wall outlet for some time, the Standby indicator
lights red. In that case, set the time again. (P.52)
z To modify the program settings, redo the timer settings from the
beginning.
z When the system is in Standby mode, you can confirm the timer setting
(on or off) for 5 seconds by pressing the [F] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
57
Display Settings
Use these settings to adjust the brightness of the display and to specify the settings for the main unit dial
lighting.
Setting the Display Brightness (DIMMER)
Use these settings to adjust the brightness of the display and to specify the
settings for the main unit dial lighting. Adjust the brightness according to
your preference and the conditions in the room.
Press the [DIMMER] key.
The setting changes as shown below each time you press the key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Reduces the display
brightness.
Normal brightness.
ROOM EQ
MODE
SOUND
PRESET
Restores the normal display
brightness and turns off the dial
lighting.
Reduces the display brightness
and turns off the dial lighting.
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
z If the R-K1000 is connected to the DP-K1000 (sold separately) using the system
control connection, setting the DIMMER function runs the same function on the
DP-K1000 also.
BAND
MUTE
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
RC-R0830E
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
58
Display Settings
Turning the Display Saver ON/OFF
If the system is not used at all for a set period, this function scrolls
the display to prevent burn-in of the text on the display and uneven
display brightness.
Press the [MODE] key.
1
ClearA
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
Select “DISP. SAVER”.
Press the [A] or [B] key.
2
ROOM EQ
MODE
SOUND
PRESET
ENTER
TUNING
VOL
Press the [ENTER] key.
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
Select “ON” or “OFF”.
Press the [A] or [B] key.
3
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
z The display saver is active.
RC-R0830E
z The display saver is disabled.
Press the [ENTER] key.
z When you are playing a CD (when the DP-K1000 (sold separately) is
connected), the display saver is activated if the system is not used at all
for 10 minutes after the CD stops playing. If you selected another input
source, the display saver is activated if the system is not used at all for 10
minutes after the last key is pressed.
z If the R-K1000 is connected to the DP-K1000 using the system control
connection, the Display Saver runs on the DP-K1000 also.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
59
Auto Power Save (A.P.S.)
Auto Power Save (A.P.S.) is a function that automatically turns the system off if it is not used at all
for 30 minutes after a CD stops playing. (When the DP-K1000 (sold separately) is connected.)
Press the [MODE] key.
1
ClearA
Select “A.P.S. SET”.
Press the [A] or [B] key.
2
SLEEP
MODE
FLAT
TIMER
TONE
DISPLAY
DIMMER
ROOM EQ
MODE
SOUND
PRESET
z “A.P.S.”flashes on the display.
ENTER
TUNING
Press the [ENTER] key.
VOL
P.CALL
AUTO / MONO
TUNER
D.AUDIO
CD
BAND
MUTE
Select “ON” or “OFF”.
Press the [A] or [B] key.
3
AUX
PHONO
D-IN2
TAPE
D-IN3
D-IN1
CLEAR
RANDOM
REPEAT
P.MODE
z “A.P.S.”lights up on the display.
RC-R0830E
z “A.P.S.”turns off.
Press the [ENTER] key.
z This function operates when the volume is set to minus infinity (–∞) dB or when
MUTE is set to on.
z When recording on external components, turn A.P.S. off or adjust volume to more
than –88 dB.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
60
Maintenance
This chapter explains how to deal with error messages displayed
on the system or problems that may arise. It also describes how
to store and maintain your system so that it continues to give
pleasure for many years to come.
Messages …………………………………………62
Troubleshooting …………………………………63
Care and Storage …………………………………66
Specifications ……………………………………67
Download from Www.Somanuals.com. All Manuals Search And Download.
English
61
Messages
Displayed Message
Meaning
CAN’T SETUP
z The ROOM EQ microphone is not connected.
RConnect the ROOM EQ microphone. (P.10)
z Headphones are plugged into the [PHONES] jack.
RUnplug the headphones.
Non-PCM
The [CD IN (COAX)], [DIGITAL IN 1 (OPT)], [DIGITAL IN 2 (OPT)] or [DIGITAL IN 3
(COAX)] terminal is receiving non-PCM input singnals. (P.14–16)
R.EQ ERROR1
Measurement failed because the room being measured is too noisy.
RReduce the amount of ambient noise.
R.EQ ERROR2
UNLOCK
Measurement failed because there is no signal input to the microphone.
The component connected to the [CD IN (COAX)], [DIGITAL IN 1 (OPT)], [DIGITAL IN
2 (OPT)] or [DIGITAL IN 3 (COAX)] terminal is not turned on. Alternatively, there is
no signal input. (P.14–16)
––– kHz
The sampling frequency of the input PCM signals is outside the playable range.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
62
Troubleshooting
Apparent faults or malfunctions may be easily resolved. Before calling for service, check the table
below for symptoms that match yours.
Amplifier/Speakers
Symptoms
Possible Cause/Solution
Ref. page
10–15
There is no sound.
z Check that the system is connected properly, as
described in “Connecting the System”.
z Increase the volume.
22
22
15
z Cancel the MUTE setting.
z If there are headphones plugged into the main unit,
unplug them.
The Standby indicator is
flashing red and there is
no sound.
z One of the speaker cords is short-circuited. Unplug the
power cord and then reconnect the speaker cord.
z There may be an internal problem. Turn off the power
to the main unit, unplug the power cord and request
repairs.
11
—
There is no sound
from the headphones.
z Check that the headphone plug is inserted correctly.
z Increase the volume.
z Cancel the MUTE setting.
15
22
22
There is no sound from
“CD”, “D-IN 1”, “D-IN 2”,
or “D-IN 3”.
z Check that the system is connected properly, as
described in “Connecting the System”.
z Check whether “PCM” is selected as the digital audio
output setting on the connected component.
14–16
There is no sound from
one of the speakers.
z Check that the system is connected properly, as
described in “Connecting the System”.
z Adjust the balance.
10
50
15
There is a booming sound
when I select PHONO as
the input source.
z Insert the audio cord plugs securely into the [PHONO IN]
jacks.
z Connect the signal earth wire to the [M] terminal.
15
52
The clock display is
flashing.
z Set the time as described in “Setting the Time”.
The timer does not
work.
z Set the time as described in “Setting the Time”.
z Set a start time and end time for the program timer.
52
54
Scrolls text on the
display.
z Disable the Display Saver.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
English
63
Troubleshooting
Tuner
Symptoms
Possible Cause/Solution
Ref. page
I can’t get reception
from a radio station.
z Connect the antennas.
z Select the broadcast band (AM or FM).
10, 11
26
z Tune the radio to the frequency of the desired station.
26
There is interference
(noise).
z Install an outdoor antenna away from the road.
z Turn off any electrical appliances that may be causing
interference.
—
z Move the system away from the TV.
I have used Auto Memory
and pressed the [P.CALL]
key, but I still can’t get
radio reception.
z Run Auto Memory again.
z Manually preset stations with frequencies that you can
receive.
28
29
Components connected to the D.AUDIO terminal
Symptoms
Possible Cause/Solution
Ref. page
I can’t use the remote
control or main unit to
control my Kenwood
digital audio player.
z Connect the player using the dedicated cable.
z Check whether the connected model is compatible.
13
34
Remote control
Symptoms
Possible Cause/Solution
Ref. page
The remote control does
not work.
z Insert new batteries.
z Use the remote control from within its effective range.
19
19
I can’t use R-K1000
remote control to
control the DP-K1000
(sold separately).
z Connect the system control cable properly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
64
Troubleshooting
Resetting the microcomputer
Symptoms
Possible Cause/Solution
Microcomputer
malfunction (the system
does not work, the
z Malfunctions may occur due to an external cause or because a
connection cord was unplugged while the system was turned on.
Use the procedure below to reset the microcomputer.
display is faulty, etc.).
1Unplug the power cord from
the AC wall outlet.
2Plug the power cord back in while
holding down the power [K] key on
the main unit.
3When the microcomputer is reset,
the display shown on the right
appears.
z
Bear in mind that resetting erases
any stored information and restores
the system’s default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
65
Care and Storage
Care and storage of main unit
„ Do not place in the following locations
z Place exposed to direct sunlight.
z Place subjected to excessive humidity or dirt.
z Place exposed to direct heat from heating equipment.
„ Be careful against condensation
When the difference in temperatures between the
main unit and the environmental air is large, dew may
be condensed inside the main unit and may cause
malfunction of the main unit. If this happens, leave the
main unit for a few hours until its internal mechanisms
are dried up.
Take special care against condensation when the main
unit is moved between places with a large temperature
difference or into a room with high humidity.
„ When a main unit becomes dirty
When the front panel or case gets dirty, wipe with a soft
dry cloth. Do not use lacquer thinner, benzine, alcohol
or contact revitalizer for these chemicals will cause
discoloration or deformation.
Download from Www.Somanuals.com. All Manuals Search And Download.
R-K1000
66
Specifications
[Amplifier]
[Digital unit]
Rated output
Rated output power (Clear A: OFF)
......................40 W + 40 W (63 Hz – 12.5 kHz, 0.7 %, 6 Ω, IEC)
Output power (Clear A: OFF)
...........................................50 W + 50 W RMS (1 kHz, 10 %, 6 Ω)
...........................................60 W + 60 W RMS (1 kHz, 10 %, 4 Ω)
Output power (Clear A: ON)
Sampling frequencies
.................................... 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Supreme EX (CD, D-IN1, D-IN2, D-IN3)
Playable frequencies................................................... 1 Hz – 44 kHz
Digital input terminals (Sensitivity/Impedance/Wave length)
OPT (Optical).................. –24 dBm – –15 dBm, 660 nm 30 nm
COAX (Coaxial) ............................................................. 0.5 Vp-p, 75 Ω
...........................................10 W + 10 W RMS (1 kHz, 10 %, 6 Ω)
...........................................15 W + 15 W RMS (1 kHz, 10 %, 4 Ω)
Total harmonic distortion (Clear A: ON)
.........................................................................0.08 % (1 kHz, 1 W, 6 Ω)
Frequency response (IHF ’66)
LINE (AUX, TAPE, D.AUDIO) ..........8 Hz – 30 kHz, +0 dB – –3 dB
LINE (CD, D-IN1, D-IN2, D-IN3)....8 Hz – 30 kHz, +0 dB – –3 dB
PHONO ‘RIAA’response.................................20 Hz – 20 kHz, 1.0 dB
Maximum input level
[Tuner]
FM tuner
Reception frequency range
............................................. 87.5 MHz – 108 MHz (50 kHz step)
AM tuner
Reception frequency range.........................531 kHz – 1,602 kHz
PHONO (MM)......................................50 mV, 0.1 % T.H.D. at 1 kHz
Signal to noise rario (CD, D-IN1, D-IN2, D-IN3).....120 dB (IHF ’66)
Tone control characteristics
[Power Supply, etc.]
Power consumption...........................................................................57 W
Power consumption (Standby)................................Less than 0.25 W
Dimensions
Width...................................................................270 mm (10-10/16”)
Height.......................................................................99 mm (3-14/16”)
Depth..................................................................... 318 mm (12-8/16”)
Weight (net)..................................................................... 5.3 kg (11.68 lb)
BASS
(TURN OVER 60 Hz) ....................................... 3.0 dB (at 60 Hz)
(TURN OVER 100 Hz).................................... 5.3 dB (at 60 Hz)
(TURN OVER 150 Hz).................................... 6.0 dB (at 60 Hz)
MID
(TURN OVER 1 kHz)........................................ 6.0 dB (at 1 kHz)
(TURN OVER 2 kHz)........................................ 6.0 dB (at 2 kHz)
(TURN OVER 3 kHz)........................................ 6.0 dB (at 3 kHz)
TREBLE
(TURN OVER 5 kHz)...................................... 5.6 dB (at 10 kHz)
(TURN OVER 7 kHz)...................................... 4.9 dB (at 10 kHz)
(TURN OVER 10 kHz)................................... 3.0 dB (at 10 kHz)
Input terminals (Sensitivity/Impedance)
PHONO (MM)...............................................................3.5 mV / 29 kΩ
LINE (AUX, TAPE)....................................................... 200 mV / 82 kΩ
LINE (D.AUDIO)......................................................... 100 mV / 82 kΩ
Output terminals (Level/Impedance)
z
z
Design and specifications are subject to change without
notice.
Full performance is not guaranteed in extremely cold
environments (under water-freezing temperatures).
LINE (TAPE) ................................................................. 200 mV / 760 Ω
Download from Www.Somanuals.com. All Manuals Search And Download.
English
67
For your records
Record the serial number, found on the back of the unit,
in the spaces designated on the warranty card, and
in the space provided below. Refer to the model and
serial numbers whenever you call upon your dealer for
information or service on this product.
Model
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
|