Kenwood CD Player DPF R3010 User Manual

CD PLAYER  
CD/DPF-R SERIES  
DPF-R6010  
DPF-R4010  
DPF-R3010  
CD-206  
CD-204  
CD-203  
INSTRUCTION MANUAL  
KENWOOD CORPORATION  
This instruction m anual is used for six m odels. Model availability and features  
(functions) m ay differ depending on the country and sales area.  
DTS disclaimer clause  
When Playing DTS-encoded CDs, excessive noise w ill be exhibited from the analog  
stereo outputs. The consum er should take proper precautions w hen the analog stereo  
outputs of the CD player is connected to an am plification system . To enjoy DTS  
Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder  
system m ust be connected to the digital output (S/ PDIF, ASE/ EBU, or TosLink) of the  
CD player.  
B60-3684-00 CH ( K,P,Y, M ,X ,T )  
ID  
99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En  
)
Unpacking  
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.  
3
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped  
to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier  
for shipping damage.  
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.  
Keep this m anual handy for future reference.  
Special features  
CD-TEXT support (CD-206/ DPF-R6010 only)  
The text information (disc title, track titles, names of the artists, songwriters, composers,  
etc.) recorded on the CDs can be easily called and displayed in alphanumerics. (Some  
words and text may not be displayed.)  
@#  
Advanced technologies incorporated in pursuit of im -  
proved sound quality and stability (CD-206/ DPF-R6010  
only)  
D.R.I.V.E. (Dynamic Resolution Intensive Vector Enhancement) IC is built in for drastic  
reduction of distortion at small signal level.  
Convenient features for dubbing CD onto tape  
Normal EDIT: Edit function for rearranging tracks according to the tape length so that no  
music is interrupted in the middle.  
)
MULTI EDIT: Several CDs can be edited and recorded on 1 tape. (Except for CD-206/  
DPF-R6010)  
¡
^
Auto space function.  
Easy operation functions  
Easy operation functions allow systematic operation with other KENWOOD components  
connected through the system control connection.  
5
Accessories  
AC plug adaptor .............. (1)  
Audio cord ............... (1)  
System control cord ........... (1)  
Use to adapt the plug on the power cord  
to the shape of the wall outlet.  
(Accessory only for regions where use is  
necessary.)  
Remote control unit .............. (1)  
(Except for CD-203/DPF-R3010)  
Batteries (R6/AA) ................. (2)  
(Except for CD-203/DPF-R3010)  
Caution: Read the pages m arked  
carefully to ensure safe operation.  
Contents  
Displays ........................................................................... 13  
Program m ed play (PGM m ode) ................................... 14  
Playback in random order (Random playback) .......... 17  
Repeated playback ........................................................ 18  
Editing ............................................................................. 20  
Norm al EDIT ................................................................ 20  
MULTI EDIT ................................................................. 21  
Tim er operations ........................................................... 23  
Maintenance ................................................................... 24  
In case of difficulty ........................................................ 25  
Specifications ................................................................. 26  
Introduction ..................................................................... 2  
Before applying pow er ................................................... 2  
Safety precautions ......................................................... 2  
Special features ........................................................... 3  
System connections ....................................................... 4  
Controls and indicators .................................................. 6  
Operation of rem ote control unit ................................. 8  
Preparing to play tracks ................................................. 9  
Norm al play (TRACK m ode) ........................................ 10  
Searching for tracks by title (TITLE SEARCH) ........... 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En  
)
Malfunction of microcomputer  
If operation is not possible or erroneous display appears even though  
all connections have been made properly, reset themicrocomputer  
Caution:  
4
Do not plug in the pow er lead until all connections are  
com pleted.  
referring to In case of difficulty.  
Make connections as show n below .  
When connecting the related system com ponents, refer also  
to the instruction m anuals of the related com ponents.  
Digital component (MD, DAT, etc.)  
(COAXIAL)  
SL 16/XS8 switch 5  
DIGITAL INPUT  
(OPTICAL)  
CD-206/ DPF-R6010 :  
LINE OUTPUT  
@
CONTROL  
DIGITAL OUTPUT  
COAXIAL  
VARI ABLE SYSTEƒM  
OPTICAL  
L
SL16 XS  
8
R
TEXT  
To wall AC outlet  
75coaxial cable  
with RCA PIN.  
(Commercially-  
available)  
Remove the protection cap when using the  
DIGITAL OUTPUT (OPTICAL) jack  
Commercially-available  
optical fiber cable  
SYSTEM  
CONTROL  
CD  
DIGITAL  
INPUT  
Digital amplifier  
(or ordinary amplifier, receiver, etc.)  
L
R
COAXIAL OPTICAL  
System control cord  
Audio cord  
CD-204/ 203/  
DPF-R4010/ R3010 :  
SYSTEM  
CONTROL  
LINE OUTPUT  
ƒ
L
R
SL1 6 XS  
8
To wall AC outlet  
SL 16/XS8 switch 5  
Connection to digital amplifier or MD (CD-206/DPF-R6010 only)  
Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the am plifier, DAT recorder, MD recorder,  
etc., using an optical fiber cable or coaxial cable w hich are com m ercially available in audio stores.  
÷When using an optical fiber cable to connect this unit to a digital  
amplifier, insert the plug straight into the jack until a snap sound is  
Optical fiber cable  
heard.  
÷Be careful not to bend, coil, or bundle the optical fiber cable.  
÷Optical fiber cables available on the market may not always be able to  
be used with this player. If your cord cannot be used with this unit,  
consult the store from which you purchased the cord or your nearest  
dealer.  
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.  
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection  
cords without removal of the power cord can cause malfunctions or damage to the unit.  
NNootteess  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System connections  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En  
)
SYSTEM CONTROL CONNECTIONS  
5
Amplifier or receiver  
Connecting system control cords after connecting a KENWOOD  
audio com ponent system lets you take advantage of convenient  
system control operations.  
SYSTEM  
CONTROL  
There are tw o KENWOOD system control m odes. Make connec-  
tions according to the groups of term inal sym bols show n below .  
This unit  
[XS 8] Mode : lets you com bine F, f, and ƒterm inals  
SYSTEM  
CONTROL  
[SL16] Mode : for  
term inals only  
This unit is com patible w ith both [XS8] and [SL16] m odes.  
Select the m ode according to the connected com ponents. 4  
Cassette deck  
j
SYSTEM  
CONTROL  
SL1 6 XS 8  
÷Do this operation after completing all connections.  
(Ensure that the unit is set to STANDBY mode.)  
NNootteess  
1. If your amplifier or receiver does not have a system control terminal, do not  
connect any system control cords to the system control terminals on the other  
components.  
2. Do not connect system control cords to any components other than those  
specified by KENWOOD. It may cause a malfunction and damage your  
equipment.  
3. Be sure the system control plugs are inserted all the way in to the system  
control terminals.  
SYSTEM CONTROL OPERATIONS  
Rem ote Control  
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.  
Autom atic Operation (Except [XR] equipm ent)  
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.  
Synchronized Recording (Except [XR] equipm ent)  
Lets you synchronize recording with the start of playback when recording from a CD. Also, the simple CCRS operation enables great recordings from  
CDs.  
See the operating instructions supplied with your cassette deck for details.  
To use the headphone (Except for CD-203/DPF-  
Adjusting the output levels of the output jacks  
andheadphone output(ExceptforCD-203/DPF-  
R3010)  
The OUTPUT level (UP/ DOWN) keys of the rem ote control  
unit can adjust the output levels from the LINE/ OUT and  
PHONES jacks of the unit.  
R3010)  
Connect a stereo headphone to the PHONES jack of the CD  
player. Adjust the sound volum e using the rem ote control  
unit.  
CD-206/ DPF-R6010  
Output level  
OUTPUT  
OUTPUT -12dB  
DOW N  
UP  
CD-204/ DPF-R4010  
1
6
2
7
3
8
4
9
5
1 0  
_1 2 d b  
Output level  
÷It is not favorable for the sound quality to decrease the output level from  
this unit too much. Use these keys for coordination with other line  
levels.  
÷Adjusting the headphone output level also changes the LINE/OUT  
level. Do not adjust the output level from this unit particularly during  
recording.  
÷Please note that the sound output is at the maximum level when the  
power is turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
6
CD-206/ DPF-R6010  
(The displays given in this manual are approximations only. They  
may differ from what actually appears on the display.)  
Play indicator  
Text information display  
••• • ••  
Pause indicator  
CD-204/ 203/ DPF-R4010/ R3010  
EDIT indicator  
RANDOM indicator  
P.C. indicator  
ALL indicator  
Music calendar (1 ~ 20)  
REPEAT indicator  
Program mode indicator  
RANDOM  
MULTI  
EDIT  
PGM  
P.C.  
ALL  
1
2
3
4
5
DISC  
NO.  
REPEAT  
TRACK NO.  
Play indicator  
Pause indicator  
SINGLE  
TOTAL  
6
7
8
9
1 0  
1 5  
2 0  
A
B
1 1  
1 6  
1 2  
1 7  
1 3  
1 8  
1 4  
1 9  
1
2
3
4
5
8
8 8 _8 8:8 8  
Disc No. indicators  
Time counter, Program No.  
(SINGLE, TOTAL)  
TRACK NO. indicator  
The illustration of the com m on parts  
is of CD-206/ DPF-R6010.  
Except for USA  
CD-204/ 203  
DPF-R4010/ R3010  
and Canada  
CD-204/ 203  
DPF-R4010/ R3010  
DISPLAY  
CHECK  
CLEAR  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
-ON STANDBY  
1
2 3  
4 5  
6
7
8 9  
MULTIPLE CD PLAYER DPF-R6 0 1 0  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
4
1
¢
TEXT DISP. ALL INFO.  
POWER  
P.MODE TIME DISP.  
RANDOM REPEAT  
EDIT  
¡
0
DISC SKIP  
-ON STANDBY  
6
7
COMPACT  
PHONES  
D.R.I.V.E.  
DIGITAL AUDIO  
TEXT  
$
% ^  
&
*
0 ! @  
#
About the STANDBY mode  
When the power cord of this unit is plugged into an AC outlet, a small amount of current is being supplied to the unit even when the ON/STANDBY switch  
is not depressed (). This is called the STANDBY mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
7
The keys w ith the sam e nam e as those on the rem ote control  
unit operate the sam e w ay as the rem ote control unit.  
1 ON/ STANDBY (POWER /  
Turns the unit ON/STANDBY.  
2 P.MODE key  
3 TEXT DISP. key (CD-206/ DPF-R6010 only)  
Used to select the CD-TEXT information display.  
CHECK key (CD-204/ 203/ DPF-R4010/ R3010 only)  
Used to check or change program contents.  
4 ALL INFO. key (CD-206/ DPF-R6010 only)  
Used to display all text information on the CD.  
CLEAR key (CD-204/ 203/ DPF-R4010/ R3010 only)  
Used to clear the program.  
) sw itch  
9
9 Open/ Close key (0)  
9
Opens and closes the disc tray.  
0 RANDOM key  
$
#
&
*
^
9
!
)
0
Press to play the tracks in a random order.  
! REPEAT key  
Press to play the tracks repeatedly.  
@ TIME DISP. key  
Press to switch the time indication mode.  
# Disc tray  
Load the disc to be played back.  
$ Search keys (1,¡)  
Fast forwards or fast reverses the track.  
% EDIT m ode key  
%
#
^
5
Rem ote control light sensor (CD-206/ 204/ DPF-R6010/  
R4010 only)  
8
!
Press to select the edit mode.  
^ STOP key (7)  
& PHONES jack (CD-206/ 204/ DPF-R6010/ R4010 only) 5  
6 Skip keys (4,¢)  
Press to skip to the beginning of another track.  
7 Disc selector keys (DISC1 – DISC5) / Indicator (CD-206/  
Use to connect (optional) headphones.  
DPF-R6010 only)  
Press to select the disc to be played.  
8 DISC SKIP key  
0
* PLAY/ PAUSE key (6)  
0
Each tim e the ke y is pre s s e d, playback and paus e s w itch  
each other.  
9
Press to rotate the disc tray or to select the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(Except for CD-203/DPF-R3010)  
Operation of remote control unit  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
The illustration show s the RC-P0601.  
The keys with the same name as those on the main unit operate the same way as on the main unit.  
The keys marked * are provided only on the remote control unit.  
8
1 Program -related and other keys  
*3 OUTPUT (DOWN, UP) key  
5
0
RANDOM key  
REPEAT key  
P.MODE key  
TIME DISPLAY key  
EDIT key  
&
DISC SELECTOR  
2
RANDOM  
REPEAT  
P.MODE  
1
4
3
4
5
*
$
^
)
4 DISC SELECTOR keys  
5 DISC SKIP key  
90  
5
2
DISC SKIP  
1
1
3
*6 Num eric keys (1 ~ ), 0)  
* CHECK key (CD-206/ DPF-R6010  
only) %™  
* CLEAR key (CD-206/ DPF-R6010  
only) ^™  
!
TIME  
DISPLAY  
4
7
5
8
6
6
7
7 Basic function keys  
Stop key (7)  
EDIT  
9
0
0
!
!
TEXT  
DISPLAY  
CHECK  
0
+1 0  
6
Play/ Pause key (6)  
Skip (4,¢) keys  
Search keys (1,¡)  
2 Selector keys relating to text infor-  
m ation CD-206/ DPF-R6010 only)  
2
3
CLEAR  
ALL INFO.  
TITLE  
7
(
ALL TEXT  
SEARCH SEARCH  
* ALL TEXT SEARCH key  
TEXT DISPLAY key  
ALL INFO. key  
9
#
#
@
4
1
¢
¡
OUTPUT  
DOW N  
UP  
* TITLE SEARCH key  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
CD-206/ DPF-R6010 :  
M o d e l : R C - P 0 6 0 1  
Infrared ray system  
CD-204/ DPF-R4010 :  
M o d e l : R C - P 0 5 0 4  
Infrared ray system  
Loading batteries  
1 Rem ove the cover.  
2 Insert batteries.  
3 Close the cover.  
2
2
1
1
÷Ins e rt tw o AA-s ize (R6) batte rie s as  
indicated by the polarity marking.  
Operation  
Remote control  
light sensor  
After plugging in the power cord, press the ON/STANDBY (POWER/  
) switch of the main unit to turn the unit ON. When the unit is  
turned ON, press the key of the function to be operated.  
6m  
30°  
30°  
Operating range  
(Approx.)  
÷When pressing more than one remote control key successively, press  
the keys securely by leaving an interval of 1 second or more between  
keys.  
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.  
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.  
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In  
such a case, change the system installation position to prevent the malfunction.  
NNootteess  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing to Play Tracks  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
• Turn the unit ON.  
Preparation  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
9
Press the ON/ STANDBY (POWER /  
)key.  
POW ER  
-ON STANDBY  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
Loading/unloading discs  
1Load/unload a disc.  
Open the tray.  
1
0
Place/ rem ove a disc.  
2
÷Do not touch the played side of disc.  
÷Loading two discs together will cause malfunctioning.  
÷Place the disc properly along the groove on the tray. (If the disc is not  
placed horizontally, malfunction will result.)  
Label side  
÷A single CD (8 cm disc) can also be played.  
÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be  
used with this unit.  
Disc tray  
When loading or unloading other discs  
3
DISC SKIP  
÷When loading/unloading a disc while the tray rotates, a malfunction  
might occur. Load/unload the disc when the tray does not rotate.  
2 Close the tray.  
CD-206/ DPF-R6010  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
All DISC indicators "  
" light regardless of how many discs are present.  
0
CD-204/ 203/ DPF-R4010/ R3010  
1
6
2
7
3
8
4
9
5
DISC  
SINGLE  
TRACK NO.  
1 0  
1
2
3
4
5
1
0 1 0:0 0  
All DISC indicators " " light regardless of how many discs are present.  
Remote control unit only  
ALL TEXT SEARCH (CD-206/DPF-R6010 only)  
For m ost CD-TEXT discs, it is convenient to read the com plete disc inform ation into the CD player before playing the disc.  
This allow s text inform ation such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other m essages to be displayed faster.  
Search in progress or reading information  
Blinks.  
After loading all the discs, operate in stop m ode.  
DISC READING  
«
ALL TEXT  
SEARCH  
R
RC-P  
D1 : CD TEXT  
When the disc is CD-TEXT  
÷The information read into the CD player is cleared when  
the tray is opened. Therefore, perform this operation  
again if the tray was opened.  
÷Repeat the above procedure so that the complete disc information is  
read into the CD player.  
÷In the case of a non-CD-TEXT disc, the D1 : NO CD TEXT“ display will  
appear for approx. 3 seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Normal play (TRACK mode)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
Use the follow ing procedure to play a CD in the original order  
of tracks from track No. 1.  
10  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
Playing tracks in order from track No. 1  
Check that the unit is in the normal play TRACK  
1
mode.  
!
2Start playback.  
CD-206/ DPF-R6010  
If there is no disc in the selected disc tray, the corresponding  
indicator "  
" goes off.  
Select the disc.  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Blinks during playback.  
CD-204/ 203/ DPF-R4010/ R3010  
or  
If there is no disc in the selected disc tray, the corresponding  
indicator " " goes off.  
1
6
2
7
3
8
4
9
5
DISC SKIP  
DISC  
TRACK NO.  
SINGLE  
1 0  
1
2
3
4
5
1
0 1 2:1 8  
÷Playback starts from the disc selected in order of the DISC No.  
÷When the 3/ 8 key is pressed without selecting a disc, playback starts  
from the indicated DISC No.  
CD-206/ DPF-R6010  
Lights up.  
01  
Track NO. being  
played  
1:23  
Elapsed time of track being played  
÷In the case of a CD-TEXT disc, the discs title is scrolled on the display.  
What is then displayed is in accordance with the TEXT DISPLAY mode.  
#
CD-204/ 203/ DPF-R4010/ R3010  
1
6
2
7
3
8
4
9
5
DISC  
TRACK NO.  
SINGLE  
1 0  
1
2
3
4
5
1
0 1 2:1 8  
Track NO. being  
played  
Elapsed time of track being played  
Disc indicator  
during Playback ()  
To pause playback  
To stop playback  
CD-206/ DPF-R6010  
01  
Lights up.  
6
7
8
1
2
3
4
5
CD-204/ 203/ DPF-R4010/ R3010  
÷Each press pauses and plays the CD alternately.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Normal play (TRACK mode)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
11  
Playback from desired track  
Select the disc.  
1
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Select the desired track No.  
2
Main unit  
Remote control unit  
Press the num eric keys as show n below ....  
1
2
3
4
¢
To enter track No. 23 : 003  
To enter track No. 40 : 0000)  
4
7
5
8
0
6
9
÷Playback starts from the selected track and continues on the subse-  
quent tracks.  
+1 0  
Skipping tracks  
4
¢
To skip  
backward  
To skip  
forward  
÷The track in the direction of the pressed key is skipped, and the selected  
track will be played from the beginning.  
÷When the 4 key is pressed once during playback, the track being  
played will be played from the beginning.  
Searching  
1
¡
Backward  
search  
Forward  
search  
÷Playback starts from the position where the key is released.  
What is the “normal play TRACK mode”?  
The norm al play TRACK m ode refers to the state in w hich the PGM, EDIT and RANDOM m ode displays are off.  
To set the unit to the TRACK m ode:  
Press the P.MODE key when the PGM“ or EDIT“ display is lighted.  
Press the RANDOM key when the RNDM“ display is lighted.  
CD-206/ DPF-R6010  
Goes off.  
Goes off.  
Goes off.  
PGM01 EDIT RNDM  
CD-204/ 203/ DPF-R4010/ R3010  
RANDOM  
P.MODE  
Goes off.  
Goes off.  
Goes off.  
RANDOM  
EDIT  
PGM  
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
(CD-206/DPF-R6010 only)  
Searching for tracks by title (TITLE SEARCH)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
In the case of a CD-TEXT disc, the tracks to be heard can be  
searched by title.  
12  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
÷Load a disc (CD-TEXT support) in the CD  
player.  
Preparation  
÷Check that the unit is in the normal play  
TRACK mode.  
÷Press the ALL TEXT SEARCH key.  
!
9
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
1Press the TITLE SEARCH key.  
Blinks.  
TITLE  
SEARCH  
D1 01 TITLE ABC  
Track title  
REMOTE C
RC-P  
0
1
÷When no CD-TEXT discs are loaded, the NO CD TEXT“ display will  
appear for approx. 3 seconds.  
To stop the search, press the  
TITLE SEARCH key again.  
2Select the name of the track (title) to be heard.  
4
¢
D1 02 TITLE XYZ  
If no keys are operated for more than a second, the track title is scrolled  
on the display.  
REMOTE CONTROL UNI
RC-P  
0
6
0
1
The track number skips  
backward.  
The track number  
skips forward.  
3Start playback.  
TITLE XYZ  
|
The letters move toward the left.  
6
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
02  
Track NO. being played  
1:23  
Elapsed time of track being played  
÷What is displayed will differ depending on the item which has been  
selected by TEXT DISPLAY.  
#
Display scrolling  
Som e track titles contain so m uch text inform ation that the full  
titles w ill not fit on the display. In cases like this, the letters on the  
display m ove from right to left so that the non-visible part of the  
title is revealed. This type of display m ovem ent is know n as  
“scrolling display.”  
Display example  
0 1 C A B C D E F G H I J K L M N O P Q ...  
|
Scroll display  
0 1 L M N O P Q ...  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(CD-206/DPF-R6010 only)  
Displays  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
13  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
Selecting the text information display (TEXT DISPLAY)  
In the case of a CD-TEXT disc, the displays show n below can  
be selected.  
In the stop m ode  
When the key is pressed once, the 1 Disc  
Titleis scrolled on the display; w hen it is  
pressed repeatedly, the display is changed.  
(This operation cannot be perform ed in the  
PGM m ode.)  
1 Disc Title  
2 Disc Artist  
3 TIME  
: Disc title  
TEXT  
DISPLAY  
: Singer (or performer)  
: Disc No., track No., time display  
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
÷If the key is released while 2 Disc Artist“ is displayed, 1 Disc Title“  
returns to the display.  
In the play m ode  
When the key is pressed once, the 1 Track  
Titleis scrolled on the display; w hen it is  
pressed repeatedly, the display is changed.  
Disc Title : AB  
Scroll display  
|
1
2
3
4
5
Track Title  
:Track title  
: ABCDEF...  
Track Artist :Singer (or performer)  
Disc Title  
Disc Artist  
TIME  
:Disc title  
:Singer (or performer)  
:Track No., time display  
÷When there is no text information to be displayed ––––is scrolled  
on the display.  
÷In the case of a non-CD-TEXT disc, the NO CD TEXT“ display will  
appear for approx. 3 seconds.  
÷If the key is released at any point while 2 Track Artist“ to 4 Disc  
Artist“ is displayed, 1 Track Title“ returns to the display.  
Displaying all the text information (ALL INFO.)  
In the case of a CD-TEXT disc, the text inform ation show n below is displayed autom atically during norm al play (TRACK m ode).  
Each item is displayed in turn each tim e the key is pressed.  
When the key is repeatedly pressed w hile an item is being dis-  
played, the display is forcibly m oved to the next item .  
ALL INFO.  
1
2
3
4
5
6
7
8
9
Disc/ Track Title : Disc and track titles  
Disc/ Track Artist : Singer (or performer)  
Disc/ Track Songw riter : Songwriter  
Disc/ Track Com poser : Composer  
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
| Scroll display  
Disc/ Track Arranger  
Disc/ Track Message  
: Arranger  
: Message from sponsor or artist  
Arranger : ABCD  
ID INFO.  
: Record company, release date, etc.  
: Genre information  
Genre INFO.  
ALL INFO. END : (Release)  
To skip to the next track while the items are being displayed:  
Press the ¢key.  
÷The display can be returned to a previous item by pressing the 4  
key.  
÷Items from 1 to 6 are displayed in the sequence of disc and track.  
÷When there is no text information to be displayed – – – – is scrolled  
on the display.  
÷In the case of a non-CD-TEXT disc, the NO CD TEXT“ display will  
appear for approx. 3 seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed play (PGM mode)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
Use the follow ing procedure to program desired tracks in a  
desired order. (up to 32 tracks)  
14  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
Preparation  
÷Load a disc in the CD player.  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
1 Press so that the “PGM” indicator lights.  
Blinks.  
CD-206/ DPF-R6010  
Do this operation in the stop m ode.  
PGM01 DISC?  
P.MODE  
CD-204/ 203/ DPF-R4010/ R3010  
Light up.  
PGM  
1
2
3
4
5
2 Program desired tracks.  
PGM01 D1 TNO.??  
Select the disc.  
1
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/  
DPF-R6010 only)  
Press the num eric keys as show n below ....  
To enter track No. 25 : 005  
CD-206/ DPF-R6010  
Go to step 2 within 8 seconds.  
PGM01 D1 TNO.25  
«
Select the desired track No.  
2
Main unit  
Remote control unit  
1
2
3
PGM01 ABCDEFGH  
In the case of a CD-TEXT disc, the track's title is scrolled on the display.  
4
¢
4
7
5
8
0
6
9
PGM01 D1 TNO.25  
+1 0  
CD-204/ 203/ DPF-R4010/ R3010  
Go to step 3 within 8 seconds.  
Set the entry.  
PGM  
5
DISC  
TRACK NO.  
3
1
2
3
4
5
1
2 5 P _ 0 1  
Track number  
P.MODE  
÷Tracks can also be selected by pressing the 4or ¢ key.  
÷Up to 32 tracks can be programmed. When FULL” is displayed, no  
more tracks can be programmed.  
÷If you make a mistake, press the CLEAR key and enter the track No.  
from the beginning.  
Repeat steps 1, 2 and 3 above.  
4
3 Start playback.  
÷When the 4or ¢key is pressed during playback, the track will be  
skipped in the direction of the pressed button.  
÷When the 4key is pressed once during playback, the play position  
returns to the beginning of the current track being played.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed play (PGM mode)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
To stop playback  
15  
7
÷The programmed contents remain in memory.  
To check or change the programmed tracks  
CD-206/ DPF-R6010  
Press the CHECK key.  
1
Blinks.  
CD-206/ DPF-R6010  
PGM01 D5 TNO.25  
CHECK  
Press until the track  
No. to be changed is  
displayed.  
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
CD-204/ 203/ DPF-R4010/ R3010  
Light up  
P.C.  
CD-204/ 203/ DPF-R4010/ R3010  
DISC  
TRACK NO.  
7
CHECK  
5
2 5 P _ 0 1  
Press until the track  
No. to be changed is  
displayed.  
÷Perform only step 1 to simply check the program.  
÷In the case of a CD-TEXT disc, the track's title is scrolled on the display.  
(CD-206/DPF-R6010 only)  
÷Each time the key is pressed, the program No. and the track No. on CD  
Select the disc.  
2
3
are displayed.  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Select the new track No.  
Main unit Remote control unit  
Example  
1
2
3
÷Press it while the PGM 01” indicator blinks.(CD-206/DPF-R6010 only)  
÷Press the key while the P.C.” indicator is lit. (CD-204/203/DPF-R4010/  
R3010 only)  
4
¢
4
7
5
8
0
6
9
÷The track being played cannot be changed.  
+1 0  
Set the entry.  
4
P.MODE  
To add a track to the program  
Select the disc.  
1
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Select the desired track No.  
Main unit Remote control unit  
2
1
2
3
÷When a track No. is selected, the track will be added to the end of the  
existing program.  
4
¢
4
7
5
8
0
6
9
+1 0  
Press the P.MODE key.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed play (PGM mode)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
To clear tracks from the program  
16  
Press to clear tracks from the end.  
CD-206/ DPF-R6010  
÷Each time the key is pressed, the last track in the program is cleared.  
÷The tracks which are programmed earlier than the track being played  
cannot be cleared.  
CLEAR  
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
CD-204/ 203/ DPF-R4010/ R3010  
CLEAR  
To clear all tracks  
P.MODE  
÷Selected tracks can be also completely cleared just by operating the 0  
key.  
÷The entire program is cleared.  
To program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only)  
Press so that the "PGM" indicator lights.  
1
P.MODE  
Select the desired disc.  
2
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Press the P. MODE key again.  
3
ALL indicator lights up.  
P.MODE  
1
6
2
7
3
8
4
9
5
ALL  
1 0  
P _ 0 1  
Auto space function  
During program m ing of tracks, a non-recorded space of a few  
seconds w ill be autom atically created betw een tracks. By record-  
ing tracks w ith these spaces on tape, the search and repeat play  
operations of tape using the DPSS function (w hich w orks by  
searching the non-recorded spaces) can be perform ed reliably.  
÷Even when the performances of two tracks are continuous (which  
occurs with classical or live recording music), the spaces will be  
created if they have different track Nos.  
Time display on CD player (TIME DISP.)  
Each press of the TIME DISP. (TIME DISPLAY) key changes  
the displayed contents.  
CD-206/ DPF-R6010  
Do this operation in the play m ode.  
1
2
3
1:23 : Elapsed time of track being played  
-2:23 : Remaining time of track being played  
23:45T : Elapsed time of entire disc (T lights up.)  
TIME DISP.  
4 -36:25T : Remaining time on entire disc (T lights up.)  
CD-204/ 203/ DPF-R4010/ R3010  
1
1:23 : Elapsed time of track being played (SINGLE lights up.)  
-2:23 : Remaining time of track being played (SINGLE lights  
up.)  
2
3
4
23:45 : Elapsed time of entire disc (TOTAL lights up.)  
-36:25 : Remaining time on entire disc (TOTAL lights up.)  
÷Only the display 1 and 2 will be displayed in PGM, RANDOM and EDIT  
modes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback in a random order (Random playback)  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
As tracks are selected at random , you can enjoy listening to  
for a long tim e.  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
17  
÷Load a disc in the CD player.  
Preparation  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
Check that the unit is in the normal play TRACK  
1
mode.  
!
2Press the RANDOM key.  
CD-206/ DPF-R6010  
During track selection: >and <move from the outside to the  
inside.  
RANDOM  
<<<><E12 ><>>>  
The number here changes.  
«
RNDM005  
In case track No. 5 is selected  
CD-204/ 203/ DPF-R4010/ R3010  
Blinks  
During random track selection  
RANDOM  
1
2
3
4
5
DISC  
NO.  
TRACK NO.  
6
7
8
9
1 0  
1 5  
2 0  
1 1  
1 6  
1 2  
1 7  
1 3  
1 8  
1 4  
1 9  
1
2
3
4
5
4
To select another track during random play  
RANDOM  
5
DISC  
REPEAT  
TRACK NO.  
SINGLE  
TL  
1
2
3
4
5
4
0 5 0:1 2  
÷Each time a track ends, the same operation as above is repeated, and  
the track selected next is played.  
÷Random play stops after all of the tunes have been played once.  
÷The random playback can also be repeated by pressing the REPEAT  
key.  
To select another track in the middle of play-  
ing one  
To cancel random playback  
RANDOM  
¢
÷Pressing the 4key once returns to the beginning of the track being  
played.  
÷Press the RANDOM key to start normal playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeated playback  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
Preparation  
÷Load a disc in the CD player.  
18  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
To repeat only the programmed tracks  
CD-206/ DPF-R6010  
Pre s s s o t h a t t h e “ PGM” in d ica t o r  
1
lights.  
P.MODE  
PGM01 DISC?  
CD-204/ 203/ DPF-R4010/ R3010  
Select the disc.  
2
PGM indicator light up.  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
PGM  
1
2
3
4
5
Go to step 3within 8 seconds.  
Select the desired track num ber.  
3
÷All of the programmed tracks will be repeated.  
÷In case only one track is programmed, only that track will be repeated.  
÷Up to 32 tracks can be programmed. When FULL” is displayed, no  
more tracks can be programmed.  
Main unit  
Remote control unit  
1
2
3
4
¢
4
7
5
8
0
6
9
+1 0  
Go to step 4within 8 seconds.  
Set the entry.  
4
P.MODE  
Repeat steps 2 4 above.  
5
6
Press the REPEAT key.  
CD-206/ DPF-R6010  
REPEAT  
REPEAT ON  
CD-204/ 203/ DPF-R4010/ R3010  
For the CD-206/ DPF-R6010  
The current status is displayed when the key  
is pressed once.  
REPEAT indicator light up.  
When it is pressed while the status is dis-  
played, the repeat ONstatus can be set to OFF  
(or vice versa).  
PGM  
DISC  
NO.  
REPEAT  
TRACK NO.  
1
2
3
4
5
3
0 1  
Start playback.  
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeated playback  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
To repeat one of the discs (CD-204/203/DPF-R4010/R3010 only)  
19  
Pre s s s o t h a t t h e “ PGM” in d ica t o r  
1
PGM indicator light up.  
lights.  
P.MODE  
PGM  
1
2
3
4
5
Select the disc.  
2
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Press the P.MODE key.  
3
4
P.MODE  
Press the REPEAT key.  
REPEAT indicator light up.  
REPEAT  
PGM  
DISC  
NO.  
REPEAT  
TRACK NO.  
1
2
3
4
5
3
0 1  
Start playback.  
5
6
To repeat the entire disc  
This allow s repeated playback of all the tracks on the disc  
loaded in the disc tray.  
CD-206/ DPF-R6010  
Pre s s s o t h a t t h e “ PGM” in d ica t o r  
goes off.  
1
\
PGM01  
01  
P.MODE  
CD-204/ 203/ DPF-R4010/ R3010  
PGM indicator goes off.  
PGM  
Press the REPEAT key.  
2
1
2
3
4
5
REPEAT  
CD-206/ DPF-R6010  
REPEAT ON  
For the CD-206/ DPF-R6010  
The current status is displayed when the key  
is pressed once.  
CD-204/ 203/ DPF-R4010/ R3010  
When it is pressed while the status is dis-  
played, the repeat ON status can be set to  
OFF (or vice versa).  
REPEAT indicator light up.  
PGM  
DISC  
NO.  
REPEAT  
TRACK NO.  
Start playback.  
3
1
2
3
4
5
3
0 1  
6
To cancel repeated playback  
CD-206/ DPF-R6010  
Press the REPEAT key.  
REPEAT  
REPEAT OFF  
CD-204/ 203/ DPF-R4010/ R3010  
REPEAT indicator goes off.  
For the CD206/ DPF-R6010  
PGM  
DISC  
REPEAT  
TRACK NO.  
Pre s s t h e REPEAT ke y o n ce a g a in .  
(REPEAT ON \OFF)  
1
2
3
4
5
3
0 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
The follow ing procedure allow s to record a CD w ithin the  
specified tape length so that no m usic is interrupted in the  
20 m iddle at the ends of sides A and B.  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
Norm al EDIT: Edit from one disc.  
MULTI EDIT: Edit and record from several discs.  
Preparation  
÷Load a disc in the CD player.  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
÷Check that the unit is in the normal play  
TRACK mode.  
!
: Keys and controls used in the operations described on this page.  
Normal EDIT  
1Light the “EDIT” indicator.  
Blinks.  
CD-206/ DPF-R6010  
Do this operation in the stop m ode.  
EDIT  
EDIT DISC?  
CD-204/ 203/ DPF-R4010/ R3010  
Go to step 2 within 8 seconds.  
If more than 8 seconds have elapsed,  
press the key again.  
Light up.  
EDIT  
PGM  
1
2
3
4
5
2Select the disc.  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Go to step 3 within 8 seconds.  
3Enter the recording time of the tape.  
Press the num eric keys as show n below .  
30-m inute tape : 000)  
46-m inute tape : 00006  
When using the num eric keys:  
CD-206/ DPF-R6010  
Main unit  
Remote control unit  
4
¢
1
2
3
EDIT DISC3 C-46  
4
7
5
8
0
6
9
CD-204/ 203/ DPF-R4010/ R3010  
Blinks.  
«
1
6
2
7
3
8
4
9
5
+1 0  
1 0  
EDIT  
C _ 4 6  
÷The interval length can be adjusted with the skip keys 4and ¢in  
units of one minute (to a maximum of 99 minutes).  
÷If you commit a mistake in time entry, press the P.MODE key and  
restart the procedure from the beginning.  
When using the TIME DISPLAY key:  
CD-206/ DPF-R6010  
÷By pressing the TIME DISPLAY key the set time-length intervals will  
change in this order:  
"4 6 =5 4 =6 0 =7 4 =9 0 =? ?  
"
Select the tim e.  
Set the entry.  
1
2
EDIT  
TIME DISP.  
CD-204/ 203/ DPF-R4010/ R3010  
\
÷By pressing the TIME DISPLAY key the set time-length intervals will  
change in this order: "4 6 =5 4 =6 0 =9 0 = - - "  
÷Automatic editing is executed for side A and side B,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
Several CDs can be edited and recorded on 1 tape.  
Choose songs from each disc, and edit/ record w hile con-  
firm ing the rem aining tim e on files A and B, respectively.  
21  
Hereafter the illustration of the com m on parts  
on the front panel is of CD-206/ DPF-R6010.  
REMOTE CONTROL UNIT  
RC-P0 6 0 1  
: Keys and controls used in the operations described on this page.  
(Except for CD-206/DPF-R6010)  
MULTI EDIT  
1 Press so that the "MULTI EDIT " indicator light.  
Light up.  
Do this operation in the stop m ode.  
EDIT  
MULTI  
EDIT  
PGM  
1
2
3
4
5
Press tw ice  
2Enter the recording time of the tape.)  
3Select the desired track.  
Select the disc (one disc only).  
1
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
Select the tracks to be recorded.  
2
Main unit  
Remote control unit  
÷If you made a mistake, press the CLEAR key and select the correct  
track.  
1
2
3
4
¢
÷The time remaining on side A or side B is indicated on the display.  
÷When the time left on side A is less than the play time of the selected  
song, that song will be programmed on side B.  
÷If FULL” is displayed, no further programming can be accepted.  
4
7
5
8
0
6
9
«
P.MODE  
+1 0  
4Start recording.  
When recording w ith a cassette deck equipped w ith CCRS  
function:  
÷With the CCRS function, the recording starts after about 1 minute.  
÷If you have a cassette deck capable of Double-speed recording, use  
Normal-speed recording.  
Press the CCRS key (Cassette deck).  
When recording w ith a norm al cassette deck:  
Adjust the recording levels.  
1
2 Press the record key.  
Play the CD.  
3
5 Repeat step 3,4 above.  
÷Change discs and, if the b-01” indication is given when you first select  
a song, turn the tape to the start of side B.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
To check the edited contents  
22  
CD-206/ DPF-R6010  
CD-206/ DPF-R6010  
EDIT A 01  
CHECK  
÷When the CHECK key is pressed, track numbers and remaining time in  
the file A are displayed first, then those in the file B.  
REMOTE CONTROL UNIT  
RC-P  
0
6
0
1
CD-204/ 203/ DPF-R4010/ R3010  
CD-204/ 203/ DPF-R4010/ R3010  
P.C. indicator light up.  
CHECK  
P.C.  
5
DISC  
NO.  
TRACK NO.  
4
A F I L E  
During norm al EDIT:  
÷When the CHECK key is pressed, the track Nos. of edited songs will  
automatically be displayed in the order they are edited.  
During MULTI EDIT:  
÷Every time the CHECK key is pressed, the track Nos. are displayed in  
the edited order.  
Playing or recording the edited contents  
When recording the edited content onto a tape, it is recom m ended  
to use the synchro recording or CCRS recording function of  
KENWOOD cassette decks.  
6
÷Do not adjust the output level from this unit particularly during record-  
ing.  
÷For details, see the instruction manual of the cassette deck.  
Press the 6 key to start playback according to the edited  
content. The playback pauses at the beginning of the track  
edited for tape side B. Press the 6 key again to continue  
playback.  
NNoottee  
To clear the edited contents  
During Norm al EDIT:  
Press any one of these keys.  
P.MODE  
Main unit  
Remote control unit  
(CD-206/DPF-R6010 only)  
CLEAR  
CLEAR  
0
÷ The edited data is cleared entirely.  
Do this operation in the stop m ode.  
During MULTI EDIT:  
P.MODE  
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the  
last track on side A or side B may be cut short.  
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.  
NNootteess  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer operations  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
Tim er playback of CD can be started at any tim e using an  
audio tim er w hich is available in audio stores.  
This unit  
23  
System control cord  
Audio cord  
Preparation  
÷ Connect the power cords of the associated  
components so that their power can be  
turned ON through the audio timer.  
(Also, be sure to read carefully the instruc-  
tion manual of the timer.)  
Amplifier  
12 : 00  
To wall AC outlet  
Audio timer  
Turn the powers of the associated components  
ON.  
÷If the amplifier is not connected to the CD player through a system  
control cord, select the "CD" input with the input selector.  
1
2Preparation  
Load a disc in the CD player.  
9
Label side  
3Set the amplifier volume.  
Play the disc.  
1
6
Adjusting the volum e:  
Set the volum e the m axim um (0 dB) using the OUTPUT  
(UP) key on the rem ote control unit (Except CD-203/ DPF-  
Adjust the am plifier volum e.  
2
3
NNoottee  
(Use the rem ote control unit (Except CD-  
203/ DPF-R3010) of this unit to adjust the  
volum e to the m axim um level.)  
R3010) , and adjust the volum e to the desired level on the  
am plifier side.  
(Since the sound output is at the maximum level when the power  
is turned on, lowering the level with the remote control unit will  
change the volume.)  
Stop the disc.  
7
4Set the timer ON time.  
Set the tim er so that it supplies  
pow er at the specified tim e.  
÷With some audio timer models, the power is automatically turned OFF  
when the timer ON time is set. With such a model, skip step 5 below.  
Turn OFF the power output from the audio  
timer.  
5
÷Do not touch the ON/ STANDBY (POWER/  
amplifier and CD player.  
) switches of the  
÷When the set time comes, the disc playback starts automatically.  
1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it.  
2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.  
NNootteess  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
24  
Disc handling precautions  
Discs which can be played with this unit  
CD (12 cm , 8 cm ) (CD-TEXT support), CDV (only the audio part)  
÷With CD-G (CD Graphics) discs, this unit can play only the audio part.  
Handling  
Hold compact discs so that you do  
not touch the playing surface.  
Label side  
Never play a cracked or warped disc.  
During playback, the disc rotates at high speed in the player.  
Therefore, to avoid danger, never use a cracked or deformed disc or a disc  
repaired with tape or adhesive agent.  
Please do not use discs which are not round because they may cause a  
malfunction.  
÷Do not attach paper or tape to either  
the playing side or the label side of  
compact discs.  
÷The paste left on the label surface  
after a sticker has been peeled off is  
a factor which may cause malfunc-  
tion. If the surface is sticky due to  
remaining paste, be sure to clean it  
with alcohol before use.  
Playing side  
Sticker  
Sticky paste  
Cleaning  
If fingerprints or foreign matter be-  
come attached to the disc, lightly  
wipe the disc with a soft cotton cloth  
(or similar) from the center of the  
disc outwards, in a radial manner.  
CD accessories  
The CD accessories (stabilizer, protection sheet, protection ring, etc.)  
which are marketed for improving the sound quality or protecting discs as  
well as the disc cleaner should not be used with this system because they  
may cause malfunction.  
Storage  
When a disc is not to be played for a  
long period of time, remove it from  
the CD player and store it in its case.  
Cleaning  
Note related to transportation and move-  
ment  
Do not use volatile solvents such as alcohol, paint thinner, gasoline, or  
benzine, etc. to clean the cabinet. Use a clean dry cloth.  
Before transporting or m oving this unit, carry out the follow ing  
operations.  
Do not use contact cleaners because it could cause a malfunction. Be  
specially careful against contact cleaners containing oil, for they may  
deform the plastic components.  
1. Turn the unit ON but do not load a disc.  
2. Wait a few seconds and verify that the display show n appears.  
CD-206/ DPF-R6010  
Caution on condensation  
NO DISC  
CD-204/ 203/ DPF-R4010/ R3010  
Condensation (of dew) may occur inside the unit when there is a great  
difference in temperature between this unit and the outside.  
This unit may not function properly if condensation occurs. In this  
case, leave the unit for a few hours with the power left ON, and restart  
the operation after the condensation has dried up.  
1
2
3
4
5
6
7
8
9
1 0  
1 5  
2 0  
1 1  
1 6  
1 2  
1 7  
1 3  
1 8  
1 4  
1 9  
1
2
3
4
5
n o d I S C  
Be specially cautious against condensation in a follow ing  
circum stance:  
3. Press the 0OPEN/ CLOSEkey to open the disc tray com pletely.  
4. Press the 0OPEN/ CLOSE key again to close the tray.  
5. Wait a few seconds and set the unit to STANDBY m ode.  
When this unit is carried from a place to another across a large  
difference in temperature, when the humidity in the room where this  
unit is installed increases, etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
What appears to be a m alfunction m ay not alw ays be serious. If your unit should not perform as expected, consult the table  
below to see if the problem can be corrected before seeking help from your dealer or service representative.  
25  
Operation to reset  
The m icrocom puter m ay m alfunction (im possibility to operate,  
Unplug the pow er cord from the pow er socket and plug the  
pow er cord into the socket again.  
erroneous display, etc.) w hen the connection cords are un-  
plugged w hile the unit is ON or due to an external factor. In this  
case, execute the follow ing m ethod to reset the m icrocom puter  
and return it to norm al condition.  
÷Please be aware that resetting the CD player will erase all stored  
information and return it to the factory settings.  
CD player unit  
Sym ptom  
Cause  
Rem edy  
The unit is not turned ON w ith the ON/  
÷Power plug is loosely connected.  
÷Insert the power plug firmly to the AC outlet.  
STANDBY (POWER/  
) sw itch ON.  
÷With the powerplug connected to the switched ÷Turn the amplifier’s power ON.  
AC outlet of an amplifier, the power of the  
amplifier is turned off.  
There is no sound even w hen a disc is loaded.  
÷Disc is loaded upside down.  
÷Disc is loose.  
÷Load the disc again with its label side up.  
÷Insert disc properly.  
÷Disc is dirty.  
÷Wipe off the dust on the surface of the disc  
referring to Disc handling precautions”.¢  
÷Replace the disc with a new one.  
÷Disc is cracked.  
÷Condensation has occurred on the optical lens  
÷Remove any condensation from the unit by  
referring to the section entitled, “Caution on  
unit.  
condensation”.  
¢
÷Play mode is not entered.  
÷The connection cords are inserted loosely.  
÷Output level is attenuated too low.  
÷Press the 6 key.  
÷Connect all connection cords firmly.  
÷Adjust the output level with OUTPUT key on  
the remote control unit.  
5
Music is interrupted. (Sound is skipped.)  
÷Disc is too dirty.  
÷Wipe off the dust on the disc surface referring  
to “Disc handling precautions”.  
¢
÷Disc is cracked.  
÷Oscillation is applied to this unit.  
÷Replace the disc with a new one.  
÷Tryselecting a place where no strong vibrations  
occur by changing the installation place, etc.  
Play begins as soon as the unit is turned ON.  
÷This unit is designed so that play begins auto- ÷If automatic play is not required remove the  
matically when the unit is turned ON if a disc is  
already loaded.  
disc from the player before setting the unit to  
STANDBY mode.  
Remote control unit  
Sym ptom  
Cause  
Rem edy  
Rem ote control operation is not possible.  
÷Batteries are exhausted.  
÷Replace with new batteries.  
÷Operate the remote control unit within the  
controllable range.  
8
÷The remote control unit is too far away from the  
main system, controlling angle is too large, or  
there is an obstacle in between.  
8
For the U.S.A.  
CAUTION:  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-CHO, HACHIOJI-SHI,  
TOKYO, JAPAN  
Use of controls or adjustment or performance of procedures other than  
those specified herein may result in hazardous radiation exposure.  
KENWOOD CORP. CERTIFIES THIS EQUIPMENT  
CONFORMS TO DHHS REGULATIONS NO. 21  
In compliance with Federal Regulations, following are reproductions of  
labels on, or inside the product relating to laser product safety.  
CFR 1040.10, CHAPTER  
I, SUBCHAPTER J.  
Location: Back Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
CD-206/ DPF-R6010  
CD-204/ 203/ DPF-R4010/ 3010  
26  
[ Form at ]  
[ Form at ]  
System .......................... Com pact disc digital audio system  
Laser ...................................................... Sem iconductor laser  
System .......................... Com pact disc digital audio system  
Laser ...................................................... Sem iconductor laser  
[ D/ A Convertors ]  
[ D/ A Convertors ]  
D/ A Conversion ........................................... 1 Bit (D.R.I.V.E.)  
Oversam pling ................................................. 8 fs (352.8 kHz)  
D/ A Conversion ............................................................... 1 Bit  
Oversam pling ................................................. 8 fs (352.8 kHz)  
[ Audio ]  
[ Audio ]  
Frequency response .......................... 4 Hz – 20 kHz, ±0.5 dB  
Signal to noise ratio ................................. More than 100 dB  
Dynam ic range ............................................ More than 95 dB  
Total harm onic distortion + noise  
Frequency response .......................... 4 Hz – 20 kHz, ±0.5 dB  
Signal to noise ratio ................................... More than 95 dB  
Dynam ic range ............................................ More than 95 dB  
Total harm onic distortion + noise  
.............................................. Less than 0.005% (at 1 kHz)  
Wow & flutter ....................................... Unm easurable Lim it  
Output level/ im pedance  
............................................. Less than 0.008% (at 1 kHz)  
Wow & flutter ....................................... Unm easurable Lim it  
Output level/ im pedance  
Variable ............................................... (Max.) 2 V/ 0.3 k  
Digital output  
Fixed (CD-203/ DPF-R3010) ............................. 2 V/ 0.8 kΩ  
Variable (CD-204/ DPF-R4010) ............. (Max.) 2 V/ 0.3 kΩ  
Headphone output (Max.)  
Coaxial .................................................... 0.5 V p-p / 75 Ω  
Optical ........................................... –15 dBm – –21 dBm  
(Wave length 660 nm )  
(CD-204/ DPF-R4010 only) ........................... 20 m W (32 )  
Headphone output (Max.) .............................. 20 m W (32 )  
[ General ]  
[ General ]  
Pow er consum ption ....................................................... 13 W  
Dim ensions ......................................... W : 440 m m (17-5/ 16")  
H : 125 m m (4-15/ 16")  
Pow er consum ption ....................................................... 14 W  
Dim ensions ......................................... W : 440 m m (17-5/ 16")  
H : 125 m m (4-15/ 16")  
D : 397 m m (15-5/ 8")  
D : 397 m m (15-5/ 8")  
Weight (Net) .................................................... 5.0 kg (11.0 lb)  
Weight (Net) .................................................... 5.0 kg (11.0 lb)  
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.  
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).  
NNootteess  
For the U.S.A.  
FCC WARNING:  
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the  
modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change  
or modification is made.  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to  
radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver in connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below. Refer  
to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model  
Serial Number  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer 6083 User Manual
Indesit Washer Dryer IWDD 7143 User Manual
Indesit Washer PWE 9168 S User Manual
Jensen Car Video System VM9224BT User Manual
JL Audio Speaker C5 570x User Manual
John Deere Compact Excavator 495D User Manual
John Lewis Oven JLBIDOS906 User Manual
Kawasaki Automobile Parts JT1500A2 User Manual
Kenwood CD Player KDC X9533U User Manual
Kodak Digital Camera DC210+ User Manual