• Pleasse readd this mmanual
and save iit with yyour oriiginal
sales recceipt.
• Tool needed for assembly:
Phillips Screewdriver
d).
h a Power WWhheeeellss®
-Acid Rechargeabllee
a Power Wheels®
ger with type 12V
both included).
Owner's Manual
with Assembly Instructions
For Models J8472 and K0450
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels® components in products other than Power Wheels® vehicles could
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only. A child
could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or the
battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
CAUTION
• In the unassembled state, this package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product
to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Some parts were placed under the seat for shipment. Press the tab under the back of the seat and lift to access the battery compartment.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any
excess lubricant.
Handlebar
Seat
Vehicle
Plate
Steering Column Cap
2 Rear Wheel Drivers
2 Left Wheels
(Marked with an L)
2 Right Wheels
(Marked with an R)
Front Clip
Brush Guard
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
12 Volt Battery
12 Volt Charger
Rear Axle
4 Bushings
2 Hand Grips
4 Hubcaps
4 Wheel Covers
Part Not Shown: Label Sheet
#8 x 3/4" Screw - 4
#8 x 2" Screw - 2
7/16" Washer - 6
13/8" Cotter Pin - 4
Fasteners Shown Actual Size
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS PICTURE
Note: Some parts shown are assembled on both sides of the vehicle.
2
3
12
14
4
1
5
7
6
8
7
17
9
9
11
8
13
9
11
10
13
15
16
10
18
Parts Not Shown
Label Sheet
1
2
3
4
5
6
Vehicle
Handlebar
Seat
7
8
9
Wheel - 4
13 Bushing - 4
14 Hand Grip - 2
15 Plate
16 Steering Column Cap
17 Front Clip
Wheel Cover - 4
7/16" Washer - 6
10 13/8" Cotter Pin - 4
#8 x 2" Screw - 2
#8 x 3/4" Screw - 4
12 Volt Battery
Rear Axle
11 Hubcap - 4
12 12 Volt Battery Charger 18 Brush Guard
Rear Wheel Driver - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
CAUTION
• Battery can fall out and injure a child if
vehicle tips over. Always use battery retainer.
Use the charger in dry locations only.
• PREVENT FIRE
About Thermal Fuses
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin the
electrical system.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting
in serious injury.
- Use of Power Wheels® components in
products other than Power Wheels®
vehicles could cause overheating, fire
or explosion.
Your Power Wheels® 12 volt battery is equipped with a built-in
thermal fuse. The thermal fuse is a self-resetting safety device which
automatically “trips” and shuts down operation of the vehicle if the
vehicle is overloaded or the driving conditions too severe. Once
a fuse has "tripped", remove your foot from the pedal and wait
approximately 25 seconds before operating the vehicle again. To
avoid repeated automatic shut-downs, do not overload the vehicle by
exceeding the 65 lb. (29.5 kg) maximum weight capacity or by towing
anything behind the vehicle. Avoid severe driving conditions, such
as driving up slopes or running into fixed objects, which can cause
the wheels to stop spinning while power is still being supplied to
the motors and make sure your child stops the vehicle before
switching direction.
• The battery must be handled by adults only.
The battery is heavy and contains sulfuric
acid (electrolyte). Dropping the battery could
result in serious injury.
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the elec-
tricity involved in charging the battery.
If a thermal fuse in a battery continually trips under normal driving
conditions, please contact your local Power Wheels® Authorized
Service Center. For the location of the Authorized Service Center
nearest to you, visit us on-line at www.powerwheels.com,
or call 1-800-348-0751.
Important Notes
• Your new battery must be charged for at least 18 hours
before you use it in your vehicle for the first time.
• Read the safety instructions on the battery.
• We recommend that you start charging your battery before
beginning assembly of your new vehicle.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If damage
or excessive wear is detected, do not use
the charger or the battery until you have
replaced the worn or damaged part.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to
recharge it.
• Before charging the battery, examine the battery case for cracks
and other damage which may cause sulfuric acid (electrolyte) to
leak during the charging process. If damage is detected, do not
charge the battery or use it in your vehicle. Battery acid is very
corrosive and can cause severe damage to surfaces it contacts.
• Do not charge the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
charge your battery.
• Use only a Power Wheels® 12 volt charger with "12 V" connector
(120 VAC, 60 Hz, 28W with an output of 12 VDC, 1200 mA)
to charge your Power Wheels® 12 volt battery.
Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of fire,
electric shock or injury. In the event of any damage, do not use
the charger until the damage has been properly repaired. Please
call 1-800-348-0751.
• If your battery is old and will not accept a charge, do not leave it
in the vehicle. Always remove a dead battery from the vehicle.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should
not handle parts, including the battery,
or help in assembly of the vehicle.
B
Battery
A
Charger
Connector
A
B
• Plug the charger connector into the battery
• Plug the charger into a standard wall outlet
Notes:
.
.
- Use the charger only in a wall outlet. Do not plug the AC adaptor
into a ceiling outlet.
- If power flow to the wall outlet is controlled by a switch, make
sure the switch is “ON”.
Rear Axle
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector from
the battery. Unplug the charger from the wall outlet. The battery is
now ready to be installed in your vehicle. Please see the Battery
Installation section on page 15 for detailed instructions on installing
your battery. If your battery is already installed in your vehicle, simply
re-connect the motor harness connector to the battery.
Cotter Pin
1
• Fit a cotter pin into the hole near one end of the rear axle.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bushing
(Barrel Side Down)
Rear Wheel Driver
(Pegged Side Down)
Motor Assembly
Slots Up
Wheel (R)
(Flat Side First)
Wheel (L)
(Indented Side Down)
Bushing
(Ring End First)
Wheel Cover
(Indented Side Out)
Wheel Cover
(Indented Side Down)
Washer
Rear Wheel Driver
(Pegged Side Out)
Washer
4
• Slide a rear wheel driver, pegged side out, onto the rear axle.
Make sure the rear wheel driver fits into the pins in the motor
assembly inside the vehicle.
• Slide a bushing, ring end first, onto the rear axle.
2
• Locate a wheel marked R. Slide the wheel, flat side first, onto the
rear axle. Make sure the pegs on the rear wheel driver fit into the
slots in the wheel.
• Slide a 7/16" washer onto the rear axle.
• Slide a wheel cover, indented side down, onto the rear axle.
• Slide a wheel cover, indented side out, onto the rear axle.
• Slide a 7/16" washer onto the rear axle.
• Locate a wheel marked L. Slide the wheel, indented side down,
onto the rear axle.
• Slide a bushing, barrel side down, onto the rear axle.
• Slide a rear wheel driver, pegged side down, onto the rear axle.
Fit the pegs on the rear wheel driver into the slots in the wheel.
Cotter Pin
Motor Assembly
Rear Axle Assembly
Rear Axle
5
• Fit a cotter pin into the hole in the rear axle.
BOTTOM VIEW
3
• Position the vehicle upside down.
• Slide the rear axle assembly through the hole in the back end of
the vehicle, as shown. Make sure the rear wheel driver fits into the
pins in the motor assembly inside the vehicle.
Download from Www.Somanuals.com. All Manuals Search And Download.
Steering Column
Connectors
Steering Column Cap
BACK VIEW
6
8
• Turn the vehicle upright.
• While holding the handlebar in place, carefully turn the vehicle over.
• Fit the handlebar steering column and both connectors down
through the large opening in the front end of the vehicle.
• Again, make sure the end of the steering column is through the hole
in the steering linkage.
• Fit the steering column cap onto the end of the steering column.
• Insert a #8 x 3/4" screw through the large opening in the steering
column cap and into the hole in the steering column. Tighten
the screw.
Steering Column
Plate
BOTTOM VIEW
7
• Lift the front end of the vehicle up slightly. Check to be sure the
steering column fits through the hole in the steering linkage. Lower
the front end of the vehicle.
9
• Push down on the handlebar assembly to “snap” it in place.
• Slide the plate under the steering column, as shown.
• Insert a #8 x 3/4" into the plate and tighten.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wheel (L)
(Flat Side First)
Hubcaps
Washer
Front Axle
Washer
Bushing
(Ring End First)
Wheel Cover
(Indented Side Out)
Hubcaps
BOTTOM VIEW
12
• “Snap” a hubcap onto the center of each wheel cover.
• Turn the vehicle upright.
10
• Slide a 7/16" washer onto the front axle.
• Slide a bushing, ring end first, onto the front axle.
• Locate a wheel marked L. Slide the wheel, flat side first, onto the
front axle.
• Slide a wheel cover, indented side out, onto the front axle.
• Slide another 7/16" washer on the front axle.
Cotter Pin
Front Clip
FRONT VIEW
13
• Fit the front clip onto the front of the vehicle, as shown.
Front Axle
Hint: The front clip may already be on the vehicle.
SIDE VIEW
11
• Fit a cotter pin into the hole on the end of the front axle.
• Repeat steps 10 and 11 to assemble the remaining washers,
bushing, wheel, wheel cover and cotter pin to the other front axle.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hand Grip
Hand Grip
Brush Guard
BACK VIEW
14
16
• Fit the brush guard onto the front clip.
• Insert two #8 x 3/4" screws into the lower holes in the brush guard
and tighten.
• Fit both hand grips on the ends of the handlebar.
Hint: If it is difficult to slide a hand grip onto the handlebar, moisten
the inside of the grip with water.
Drive Buttons
Battery Indicator
Connector
(with Orange Tag)
Connectors
17
• Locate the opening under the drive buttons.
15
• Reach into the opening and pull the battery indicator connector
and high speed connector out through the opening.
• Insert two #8 x 2" screws into the upper holes in the brush guard
and tighten.
• Plug the battery indicator connector (with orange tag) into the
matching connector (with orange tag). Leave the high speed
connector (with yellow tag) unplugged for now. See page 18 for
information on high speed operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive Buttons
A
DECORATION
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
Seat
• Place the labels exactly as shown in the illustrations. For best
results, avoid repositioning a label once it has been applied to
the vehicle.
B
• After applying a label, rub the label firmly with a clean, dry cloth to
make sure the label is adhered to your vehicle. Start at the center of
a label, and smooth towards the outer edges to remove air bubbles.
22
23
14
18
• Fit the tab at the front of the seat into the slot near the drive
A
buttons
.
• “Snap” the tab at the back of the seat into the slot near the rear of
B
the vehicle
.
18
17
BACK VIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR MODEL J8472
FOR MODEL K0450
9
9
19
19
3
11
8
3
8
11
4
7
4
7
5
6
5
6
2
2
16
16
21
20
21
20
RIGHT SIDE VIEW
RIGHT SIDE VIEW
1
10
1
10
12
15
13
13
12
15
LEFT SIDE VIEW
LEFT SIDE VIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
IMPORTANT! Use only a Power Wheels® 12 volt lead-acid
rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18 hours
using the enclosed Power Wheels® 12 volt charger before operating
your vehicle for the first time. Charge the battery for at least
14 hours after each use of the vehicle. Never charge the battery
longer than 30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.
Battery Retainer
Seat
3
• Carefully lower the battery into the battery compartment.
The battery retainer slides over the battery to secure it.
Drive Buttons
1
A
Seat
• Press the tab under the back edge of the seat and lift to remove
the seat.
B
Power Wheels®
Battery
Retainer
12 Volt Battery
4
• Fit the tab at the front of the seat into the slot near the drive
A
buttons
.
Motor Harness
Connector
• “Snap” the tab at the back of the seat into the slot near the rear of
B
the vehicle
.
2
• Lift the battery retainer to access the battery compartment.
• Place the battery upright in the battery compartment.
• Plug the motor harness connector into the battery. Push firmly.
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CARE AND DISPOSAL
Disposal
• Your Power Wheels® battery is a non-spillable, sealed lead-acid
battery. It must be recycled or disposed of in an environmentally
sound manner.
Care
If a battery leak develops, avoid contact with the leaking acid and
place the damaged battery in a plastic bag. See information below
for proper disposal.
If acid comes in contact with skin or eyes, flush with cool water
for at least 15 minutes and call a physician.
• Do not dispose of a lead-acid battery in a fire. The battery may
explode or leak.
If acid is internally ingested, give water, milk of magnesia or egg
whites immediately. Never give emetics or induce vomiting. Call
a physician.
• Do not dispose of a lead-acid battery in your regular, household
trash. The incineration, landfilling or mixing of sealed lead-acid
batteries with household trash is prohibited by law in most areas.
• Charge a new battery for at least 18 hours before first use.
Never charge the battery longer than 30 hours. Overcharging or
undercharging the battery may shorten battery life and decrease
vehicle running time.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
• Return an exhausted battery to a federal or state approved lead-
acid battery recycler, such as a Power Wheels® authorized service
center or a local seller of automotive batteries. For the authorized
service center location nearest to you, please visit us on-line at
local waste management officials for other information regarding
the environmentally sound collection, recycling and disposal of
lead-acid batteries. If you live in the State of Florida or the State
of Minnesota, it is prohibited by law for anyone to throw away
lead-acid batteries in the municipal waste stream.
• After the first charge, recharge the battery for at least 14 hours
after each use. Never charge the battery longer than 30 hours.
Charge the battery after each use, regardless of how long the
vehicle was used.
• The battery must be upright while charging.
• Do not allow the battery to run down completely before charging.
• Charge the battery before storing the vehicle.
• Charge the battery at least once per month, even if the vehicle has
not been used.
• Leaving the battery in a discharged condition will ruin it.
• Always remove an exhausted battery from the vehicle. Battery
leakage and corrosion can damage the vehicle.
• Do not store the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
store the battery.
• Do not store the battery in temperatures above 75° F or
below -10° F.
• Use only a Power Wheels® 12 volt battery. Remember to charge
the new battery for at least 18 hours before first use.
• Prevent the battery from moving freely inside the battery compart-
ment. Always use the battery retainer to secure the battery in
the battery compartment.
• Examine the battery, charger and their connectors for excessive
wear or damage each time you charge the battery. If damage is
detected, do not use the charger or the battery until you have
replaced the worn or damaged part.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFE DRIVING RULES
Teach Safety Rules to Children
RIDING HAZARD
While children can quickly develop the skill necessary to drive this
vehicle, it is important to remember that their judgment skills are still
very immature. Unsupervised driving by children can lead to serious
injury. Before children use this vehicle, an adult should carefully
evaluate the driving area as well as the children’s skill level and ability
to drive this vehicle safely. Children are not always able to recognize
or anticipate hazards, even when they have been taught about them.
There is no acceptable substitute for direct adult supervision.
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride at Night.
Teach appropriate safety rules to your child before allowing operation
of this vehicle. These rules should also be reviewed with neighborhood
children or other playmates who want to drive this vehicle.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other
bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars,
roads and alleys.
Low Speed Drive
Riding Rules
Make sure children know and follow these rules for safe driving:
1. Always sit on the seat.
2. Always wear shoes.
3. Only 1 (one) rider at a time. A child who is not sitting on the seat
or who is standing on the vehicle could fall off, cause a tip-over or
block the driver’s view. A child could be seriously injured.
4. Do not allow any child to drive the vehicle in the street or near
moving (motorized) vehicles.
• Riding Rules
Make sure children know and follow
these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
5. Do not allow any child to drive near bodies of water (such as pools
or creeks), obstructions (such as furniture, low tree limbs or play
equipment), or drop-offs (such as stairs or decks).
6. Do not allow any child to drive the vehicle in the dark. A child could
encounter unexpected obstacles and have an accident. Operate
the vehicle only in the daytime or a well-lit area.
7. Restrict your child's driving to areas that are generally level with
gentle inclines or slopes.
8. Do not allow your child to drive down or across a steep slope.
- The vehicle may gain unsafe speed, even if the pedal is released
to stop.
- The vehicle may tilt and tip over.
- The wheels could lose traction, causing the vehicle to slip.
9. Do not allow your child to drive up steep inclines. The motor may
stop and the vehicle could roll backwards at an unsafe speed.
10. Never put anything near any moving parts. Rotating parts such as
motors, gear boxes and wheels can snag fingers, hair, etc., causing
serious injury. Do not allow operation of the vehicle when it is on its
side or in an upside-down position.
Restrict your child's driving to areas that are generally level.
11. Do not operate the vehicle near flammable vapors (gasoline, paint
thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches,
like most electrical switches, emit an internal spark when first turned
on or turned off. The presence of flammable liquids or vapors could
cause an explosion or a fire. Keep all flammable products in tightly
sealed containers and away from the vehicle.
12. Do not allow a child to operate the vehicle without direct adult
supervision. To prevent unsupervised use of the vehicle, disconnect
the motor harness from the battery when the vehicle is not in use.
To disconnect the motor harness:
- Press the rear tab on the seat and lift to remove.
- Lift the battery retainer to access the battery compartment.
- Pull the motor harness connector from the battery.
- Lift the battery retainer and slowly lower the battery into the
compartment.
- Replace the seat on the vehicle.
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE OPERATION
As assembled, your vehicle is ready to roll in low speed (21/2 mph, maximum). It has been pre-set so it will only operate in low speed. After your child
has mastered the basic skills of driving and understands the rules for safe driving, it’s time to connect the high speed connectors to allow the vehicle to
operate in high speed. See the instructions on this page to connect the high speed connectors and operate the vehicle at high speed.
Beginner Use - Low Speed Drive
Advanced Use - High Speed Drive
Drive
• Press the DRIVE button on the tank.
• Press the foot pedal.The vehicle goes forward at a maximum of 21/2 mph.
• Remove the seat to access the high speed hook-up.
• Help your child practice steering to learn how far and how quickly to
turn the handlebar when driving forward in low speed.
• Locate the high speed connector in the opening inside the front end
of the vehicle. Plug the high speed connector (with yellow tag) into
the matching connector (with yellow tag).
• Re-assemble the seat.
To Back Up
• To prevent operation of the vehicle in high-speed, simply disconnect
the high speed connectors.
Reverse
Twist Grip
to Activate
High Speed
IMPORTANT! To prevent damaging the motors and gears, teach
your child to stop the vehicle before switching direction.
• Press the REVERSE button on the tank.
• Press the foot pedal. The vehicle backs up at a maximum of 21/2 mph.
• Help your child practice steering to learn how far and how quickly to
turn the handlebar when driving in reverse.
• Turn the right grip to shift the vehicle into high speed. The vehicle
drives forward at a maximum of 5 mph.
• Help your child practice steering to learn how far and how quickly to
turn the handlebar when driving forward in high speed.
STOP!
IMPORTANT! Use the vehicle ONLY outdoors. Most interior flooring
can be damaged by riding the vehicle indoors. Fisher-Price® will not
be responsible for damage to floors if vehicle is used outdoors.
• Your vehicle has a patented, electronic braking system that auto-
matically stops the vehicle when your child’s foot lifts from the pedal.
• Make sure your child is comfortable with steering the vehicle and
automatically knows how to stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHARGE INDICATOR
VEHICLE CARE
• Check all screws, cap nuts and their protective coverings regularly and
tighten as required. Check plastic parts on a regular basis for cracks or
broken pieces.
• During snowy or rainy weather, the vehicle should be stored inside
or under a protective cover. Remember to charge the battery at least
once per month while your vehicle is not in regular use.
Button
• An extremely dirty vehicle can be rinsed with a hose but avoid
spraying directly into switches, motors and battery compartment.
Water or moisture in the motors or electrical switches can cause them
to corrode, and could cause switch or motor failure.
• Avoid operating the vehicle on sand. Sand in the motors or
electrical switches can cause them to jam, and could cause switch
or motor failure.
• The vehicle can be wiped down with a soft, dry cloth. For a shiny
finish, you can wipe plastic parts with a non-wax furniture polish
applied to a soft-cloth. Do not use automotive wax.
• To ensure that your vehicle stays in good operating order, we
recommend that you periodically have your vehicle checked by a
Power Wheels® authorized service center. For the location of the
authorized service center nearest you, please visit us on-line at
12 VOLT BATTERY CHARGE INDICATOR
• Press the 12 volt battery charge indicator button to check the
power level of your battery:
All four lights means the 12 volt battery is 100% (fully) charged.
Three lights means the 12 volt battery is 75% (mostly) charged.
Two lights means the 12 volt battery is 50% charged.
We recommend recharging your battery for 14 hours.
One or no lights means the 12 volt battery needs charging. Fully
charge your battery for 14 hours.
Hint: For the most accurate reading, do not press the battery charge
indicator while the vehicle is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a
problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST) Monday through Friday
and 11 AM - 5 PM (EST) Saturday. Or, contact your local Power Wheels® authorized service center. For the location nearest you, please visit us
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle does not run
Undercharged battery
Charge the battery. A new battery should have been charged for at
least 18 hours before using the vehicle for the first time. After first-
time use, recharge the battery for at least 14 hours after each use.
Never charge the battery longer than 30 hours.
Check all connectors. Make sure the charger connector is plugged
into the battery, and that the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Charger is not working
Tripped thermal fuse
There is no sure way to tell if your charger is working unless you
have a volt meter. If you suspect there is a problem with your
charger, contact your local Power Wheels® authorized service
center. They can test your charger for you.
The built-in thermal fuse may “trip” and shut down operation of the
vehicle if the vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your foot from the pedal
and wait approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shutdowns, do not overload
the vehicle by exceeding the 65 lbs (29.5 kg) maximum weight
capacity or by towing anything behind the vehicle. Do not drive
up hills or run into fixed objects, which can cause the wheels to
stop spinning while power is still being supplied to the motors. If
a thermal fuse continually trips, contact your local Power Wheels®
authorized service center.
Loose wire or loose connectors
Dead battery
Check all wires and connectors. Make sure the motor harness
connector is plugged into the battery, and that there are no loose
wires around the motors.
If your battery is old or if you have not followed Battery Care
instructions, your battery may be dead. If you are unsure whether
or not the battery is dead, you can have it tested at your local
Power Wheels® authorized service center.
Electrical switch damage
The electrical switches can become corroded due to exposure to
water or moisture, or can jam due to loose dirt, sand or gravel.
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Motor damage
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Vehicle was running but
suddenly stopped
Loose wire or loose connectors
Check all wires and connectors. Make sure the motor harness
connector is plugged into the battery, and that there are no loose
wires around the motors.
Tripped thermal fuse
The built-in thermal fuse may "trip" and shut down operation of the
vehicle if the vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your foot from the pedal
and wait approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shutdowns, do not overload
the vehicle by exceeding the 65 lbs (29.5 kg) maximum weight
capacity or by towing anything behind the vehicle. Do not drive
up hills or run into fixed objects, which can cause the wheels to
stop spinning while power is still being supplied to the motors. If
a thermal fuse continually trips, contact your local Power Wheels®
authorized service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Short run time (Less than
1 - 3 hours per charge)
Undercharged battery
Charge the battery. A new battery should have been charged for at
least 18 hours before using the vehicle for the first time. After first-
time use, recharge the battery for at least 14 hours after each use.
Never charge the battery longer than 30 hours.
Check all wires and connectors. Make sure the charger connector
is plugged into the battery, and that the charger is plugged into
the wall.
Make sure power flow to the wall outlet is “ON”.
Overcharged battery
Do not charge the battery longer than 30 hours. If you suspect
that your battery is damaged as a result of overcharging, contact
your local Power Wheels® authorized service center. They can test
your battery for you.
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery does not last
forever. Average battery life is 1 to 3 years depending on vehicle
use and use conditions. Replace the battery with a new Power
Wheels® 12 volt rechargeable battery. Do not substitute parts.
Tripped thermal fuse
The built-in thermal fuse may “trip” and shut down operation of the
vehicle if the vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your foot from the pedal
and wait approximately 25 seconds before operating the vehicle
again. To avoid repeated automatic shutdowns, do not overload
the vehicle by exceeding the 65 lbs (29.5 kg) maximum weight
capacity or by towing anything behind the vehicle. Do not drive
up hills or run into fixed objects, which can cause the wheels to
stop spinning while power is still being supplied to the motors. If
a thermal fuse continually trips, contact your local Power Wheels®
authorized service center.
Vehicle runs sluggishly
Undercharged battery
Charge the battery. A new battery should have been charged for at
least 18 hours before using the vehicle for the first time. After first-
time use, recharge the battery for at least 14 hours after each use.
Never charge the battery longer than 30 hours.
Check all connectors. Make sure the charger connector is plugged
into the battery, and that the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Be sure to charge the battery after each use.
Battery needs charging
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery does not last forever.
Average battery life is 1 to 3 years depending on the vehicle use
and use conditions. Replace the battery with a new Power Wheels®
12 volt rechargable battery. Do not substitute parts.
Vehicle is overloaded
Make sure you do not overload the vehicle by allowing more than
one rider at one time, by exceeding the 65 lbs (29.5 kg) maximum
weight capacity, or by towing objects behind the vehicle.
Driving conditions are too stressful
Restrict your child's driving to areas that are generally level with
gentle inclines or slopes.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle runs in low speed, but
does not run in high speed.
High speed hook-up not disconnected.
The vehicle was pre-set to run only in low speed. To allow the
vehicle to run in low and high speed, you must connect the High
Speed connectors. Follow the instructions on page 18.
Please note: The vehicle is
designed to operate in low
speed only in reverse.
Note: The high speed connectors must be joined to use the
high speed grip.
When the foot pedal is pressed
one rear wheel spins
Operation of vehicle in low speed
It is possible that only one rear wheel may spin when both rear
wheels are raised off the ground and the vehicle is in low speed.
This does not necessarily indicate a problem. Check for proper
operation of the drive system by raising the rear wheels off the
ground and pressing the foot pedal. If only one rear wheel spins,
carefully press your hand on the spinning wheel to slow it down.
The other rear wheel should begin to spin. If the other rear wheel
does not begin to spin, there may be a problem with the vehicle.
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Sometimes the vehicle doesn’t
run, but other times it does
Loose wire or connector
Check all wires around the motors and all connectors to make
sure they are tight.
Motor or electrical switch damage
Loose wire or connector
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
When the foot pedal is
pressed, the vehicle won’t run
without a push
Check all wires around the motors and all connectors to make
sure they are tight.
“Dead Spot” on motor
Damaged battery
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Battery's thermal fuse
constantly "trips", but the
vehicle is not overloaded
nor the driving conditions
too severe
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Child is switching between FORWARD
and REVERSE without stopping
Teach your child to stop the vehicle before switching direction.
Loud clacking or grinding noise
from a motor-gearbox
Broken gears
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Charger gets warm during use
It is normal for some chargers to get
warm during use and is not reason for
concern.
No action required.
If your charger does not get warm during use, it does not mean
that it is not working properly.
Battery makes a sizzling or
gurgling noise when charging
It is normal for some batteries to make
noise and swell slightly while charging
and is not reason for concern.
No action required.
If your battery does not make noise or swell slightly during
charging, it does not mean that it is not accepting the charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Bumper-to-Bumper*
Limited Warranty
One year limited warranty from the date of purchase on the Power Wheels® vehicle.
Six month limited warranty on the 12 volt battery.
For the original purchaser, this one year limited warranty covers the Power Wheels® ride-on vehicle (purchased from Power Wheels®) against defects in
materials and workmanship.The six month limited warranty applies only to the 12 volt battery included by Power Wheels® with the original purchase of
the vehicle.
This warranty covers normal use and does not cover the Power Wheels® vehicle or battery if damaged by unreasonable use, neglect, accident, abuse,
misuse, improper service or other causes not arising out of defects in materials or workmanship. Evidence of any attempt at consumer repair will void this
warranty.THIS WARRANTY DOES NOT COVER, AND IS INTENDED TO EXCLUDE, ANY LIABILITY ON THE PART OF POWER WHEELS®, WHETHER
UNDER THIS WARRANTY OR IMPLIED BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH OF WARRANTY. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION SO THIS LIMITATION MAY NOT APPLY TO YOU.
Should you need service or assistance with your vehicle during the warranty period, do not return the vehicle to the store. Power Wheels® has provided a
nationwide network of authorized service centers. If there is not an authorized service center in your area, please visit us on-line at www.powerwheels.com
or call Consumer Relations for information, 1-800-348-0751.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
PLEASE SAVEYOUR ORIGINAL SALES RECEIPT.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before first-time use,
you must charge the battery
18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle is not used or stored.
Do not return
your vehicle to the store!
We're a toll-free phone call away, and we can help.
If you are missing parts or need assistance, please call:
1-800-348-0751
9 AM - 7 PM (EST) Monday through Friday and 11 AM - 5 PM (EST) Saturday.
Or contact your local independently owned and operated
Power Wheels® Authorized Service Center.
Kawasaki and Ninja are trademarks licensed by Kawasaki Motors Corp., U.S.A., which does not manufacture or distribute this product.
Consumer inquiries should be directed to Fisher-Price, Inc./Power Wheels, 636 Girard Avenue, East Aurora, NY 14052.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.
©2006 Mattel, Inc. All Rights Reserved.
Fisher-Price and Power Wheels are U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO
J8472pr-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|