Kawasaki Impact Driver 840051 User Manual

COMPONENT  
#840051  
1/2" IMPACT WRENCH KIT  
INSTRUCTION MANUAL  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
87-1904-60957  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS  
PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT  
LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™  
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR  
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE  
DIRECTED TO:  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS  
PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL,  
HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR  
COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US.  
1-800-590-3723  
Printed in China  
Imprimé dans la Chine French  
Impreso en China Spanish  
©COPYRIGHT 2005 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
LONG BEACH, CA 90810-1462 USA  
840051 – 1/2" Corded Impact Wrench  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WORK AREA  
CAUTION used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
Keep your work area clean and well lit. Cluttered benches and dark areas invite  
accidents.  
NOTE provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
Do not operate power tools in explosive atmospheres, such as in the presence of  
flammable liquids, gases or dust. Power tools create sparks which may ignite the  
dust or fumes.  
Keep bystanders, children, and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
IMPORTANT SAFEGUARDS  
ELECTRICAL SAFETY  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord  
away from heat, oil, sharp edges, or moving parts. Replace damaged cords  
immediately. Damaged cords may create a fire.  
WARNING: Some dust created by power sanding, sawing, grinding, drilling and  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
PERSONAL SAFETY  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
Stay alert, watch what you are doing, and use common sense when operating a  
power tool. Do not use tool while tired or under the influence of drugs, alcohol  
or medication. A moment of inattention while operating power tools may result in  
serious personal injury.  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep  
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or  
long hair can be caught in moving parts.  
Remove adjusting keys or wrenches before turning the power tool “ ON” .  
A wrench or a key that is left attached to a rotating part of the power tool may result  
in personal injury.  
WARNING: Handling the power cord on this product may expose you to lead, a  
chemical known to the State of California to cause cancer and birth defects or  
other reproductive harm. Wash hands after handling.  
Do not overreach. Keep proper footing and balance at all times. Proper footing  
and balance enables better control of the power tool in unexpected situations.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.  
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety  
shoes, hard hat or hearing protection must be used for appropriate conditions.  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOOL USE AND CARE  
SAFETY RULES FOR IMPACT WRENCHES  
Use clamps or other practical ways to secure and support the workpiece to a  
stable platform. Holding the work by hand or against your body is unstable and  
may lead to loss of control.  
Use only impact sockets. Non-impact sockets may shatter or break causing  
injury and/or damage.  
Do not force tool. Use the correct tool for your application. The correct tool will  
Ensure fastener and/or system will withstand the level of torque generated  
do the job better and safer at the rate for which it is designed.  
by the tool. Excessive torque may cause breakage and possible personal injury.  
Do not use the tool if the power switch does not turn it ON” or OFF. A tool that  
cannot be controlled with the switch is dangerous and must be repaired.  
Always wear safety goggles or eye protection when using this tool. Use a dust  
mask or respirator for applications which generate dust.  
Disconnect the power cord plug from the power source before making any  
adjustments, changing accessories or storing the tool. Such preventive safety  
measures reduce the risk of starting the tool accidentally.  
Do not grasp the tool or place your hands too close to the spinning anvil. Your  
hand may be lacerated or may cause injury.  
Secure the material being worked on. Never hold it in your hand or across your  
legs. Unstable support can cause loss of control and injury.  
Store idle tools out of reach of children and other untrained persons. Tools are  
dangerous in the hands of untrained users.  
Position yourself to avoid being caught between the tool or side handle and walls  
or posts. Should the socket or bit become bound in the work, the reaction torque  
of the tool could crush your hand or leg.  
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained  
tools with a sharp cutting edge are less likely to bind and are easier to control.  
Check for misalignment or binding of moving parts, breakage of parts, and any  
other condition that may affect the tool’s operation. If damaged, have the tool  
serviced before using. Many accidents are caused by poorly maintained tools.  
Check to see that keys and adjusting wrenches are removed from the Impact  
Wrench before switching the tool “ ON” . Keys or wrenches can fly away at high  
velocity striking you or a bystander.  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may create a risk of injury when used  
on another tool.  
When using the Impact Wrench, always maintain a firm grip on the tool with both  
hands.  
Keep the handle of the Impact Wrench dry, clean, and free from oil and grease.  
Do not run the Impact Wrench while carrying it at your side. A spinning socket or  
bit could become entangled with clothing and injury may result.  
SERVICE  
Tool service must be performed only by qualified repair personnel. Service or  
maintenance by unqualified personnel may result in a risk of injury.  
Disconnect the plug from the power supply and place the switch in the locked or  
OFF” position before making any assembly adjustments, changing accessories,  
performing any inspection, maintenance or cleaning procedures. Such preventive  
safety measures reduce the risk of starting the tool accidentally.  
When servicing a tool, use only identical replacement parts. Follow instructions  
in the Maintenance section of this manual. Use of unauthorized parts or failure to  
follow Maintenance Instructions may create a risk of shock or injury.  
Do not use the Impact Wrench if it has been damaged, left outdoors in the rain,  
snow, wet or damp environments, or immersed in liquid.  
Maintain labels and nameplates on the Impact Wrench. These carry important  
information. If unreadable or missing, contact Alltrade for a replacement.  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
OPERATING INSTRUCTIONS  
Hold tool by insulated gripping surfaces when performing an operation where the  
cutting tool may contact hidden wiring. Contact with a live” wire will also make  
exposed metal parts of the tool live” and shock the operator.  
3
4
2
SYMBOLS  
IMPORTANT: Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
1
SYMBOL  
NAME  
Volts  
Amperes  
Hertz  
Watt  
Kilograms  
Alternating Current  
Direct Current  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
5
V
A
Hz  
W
Kg  
Alternating or Direct Current Type of Current  
Earthing Terminal  
Class II Construction  
Minutes  
Seconds  
Diameter  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
Size of Drill Bits,  
CONTROLS AND COMPONENTS:  
1. Rocker Switch  
2. Gear Enclosure  
3. Brush Caps  
4. Anvil  
ACCESSORIES:  
5. Impact Sockets (4)  
6. Carbon Brushes (2) (not shown)  
min  
s
Grinding Wheels, etc.  
No load speed  
No-load Rotational Speed  
.../min  
Revolutions per Minute  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
COMPONENT  
CARBON BRUSHES  
MODEL NUMBER  
690296  
1,2,3, …  
Ring Selector Settings  
Speed, Torque or Position Settings  
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
ROCKER SWITCH AND DIRECTION OF ROTATION  
To rotate the Impact Wrench  
in a clockwise direction, press  
the lower portion of the  
Rocker Switch.  
MAINTENANCE AND CLEANING  
Always UNPLUG the Impact Wrench from power source  
before attempting cleaning or maintenance.  
To rotate the Impact Wrench  
in a counter-clockwise  
direction, press the upper  
portion of the Rocker Switch.  
CLOCKWISE  
This Impact Wrench is lubricated before it leaves the  
factory. This lubrication should last for the life of the tool. No further  
lubrication is required.  
COUNTER-CLOCKWISE  
ROCKER  
SWITCH  
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get  
inside the casing. Never immerse any part of the tool in a liquid. Always keep the  
ventilation openings clear.  
Brushes will wear with use and should be inspected periodically by qualified  
personnel. Unscrew the plastic caps on the sides of the motor housings to inspect  
the spring and brush assembly. If the brushes are worn down to the line closest to  
the spring, replace them immediately.  
Regularly clean the ventilation slots in your tool and charger using only a soft  
brush or dry cloth.  
Never open the Impact Wrench case. Do not attempt to repair the Impact Wrench  
yourself. Opening this tool will void your warranty.  
INSTALLING / REMOVING SOCKET  
When installing a socket,  
ACCESSORIES  
align the holes in the side  
of the socket with the dent  
pin. Press the socket on until  
the dent pin engages in the hole.  
To remove a socket, depress  
the dent pin through the hole  
using a small pointed object, and  
pull the socket off.  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
If you must use an extension cord, be sure that the gauge is large enough to carry  
the amount of current necessary for your power tool. If not, your tool may experi-  
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge  
number, the heavier the cord (see table below).  
When removing the socket or bit  
from the tool, avoid contact with  
skin and use proper protective  
gloves when grasping the socket,  
bit or accessory. Accessories may  
be hot after prolonged use.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
18  
16  
14  
14  
-
14  
12  
12  
12  
12  
12  
-
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
component thereof is modified or altered. This warranty does not apply to any  
other product and/or component thereof manufactured or distributed by Alltrade,  
and does not apply to products and/or components thereof designed, manufactured  
and/or assembled by others, for which Alltrade makes no warranties whatsoever.  
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON  
THE FACE HEREOF.  
SPECIFICATIONS  
SPECIFICATIONS  
Voltage  
120V  
60 Hz  
Rated Current  
No-Load Speed  
Impacts Per Minute  
Maximum Torque  
7.0A  
2100/min  
2700  
Warranty Performance  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #310-522-9008)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
220 ft.lbs.  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
Reciprocating Saws  
Routers  
Rotary Tools  
Jigsaws  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
Circular Saws  
Angle Grinders  
3 YEAR LIMITED WARRANTY  
Express and Exclusive Limited Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI(tm) power tool and no one else all  
parts of the product (except those parts referred to below which are specifically  
excluded from such warranty (see Exclusions)) to be free from defects in materials  
and workmanship for a period of three years from original date of purchase, except  
that such warranty with regard to the battery shall be for a period of two years from  
original date of purchase, unless the tool is used for commercial or rental  
purposes.  
SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE: The above  
warranty for this Kawasaki(tm) power tool, including the battery, shall be effective  
for only 90 days from the original date of purchase if this tool is used for any  
COMMERCIAL OR RENTAL PURPOSE.  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
11  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Exclusions  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
Warranty Disclaimers  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department at 1-310-522-9008 or toll free at 1-800-590-3723 for general repair  
information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
13  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENT  
#840055  
19.2V 2-SPEED  
BATTERY-OPERATED DRILL  
INSTRUCTION MANUAL  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,  
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND  
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO  
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE  
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE  
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION  
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE  
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.  
YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™  
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR  
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE  
DIRECTED TO:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
©COPYRIGHT 2008 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
LONG BEACH, CA 90810-1462 USA  
1-800-590-3723  
Printed in China  
840055 – 19.2V Cordless Drill_Rev. 2/7/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION FOUR  
MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18  
TABLE OF CONTENTS  
CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
SECTION ONE  
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 19  
GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS . . 2  
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3  
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6  
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
SECTION TWO  
SECTION FIVE  
2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22  
CONGRATULATIONS!  
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality  
products at an affordable price, and we want you to be totally satisfied with your  
product and our Customer Service. If any help and advice is needed, please  
contact us at 1-800-590-3723. Properly cared for, this tool will give you many  
years of satisfaction.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . 7  
SAFETY RULES FOR CORDLESS DRILL/DRIVERS . . . . . . . . . . . . 7  
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
SECTION THREE  
INTENDED USE  
This tool is intended for consumer use only. Your charger and/or adapter has been  
designed for charging batteries of the type approved and supplied with this tool.  
FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12  
REMOVING/ATTACHING BATTERY PACK . . . . . . . . . . . . . . . . . . . 11  
CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
CHARGING BATTERY PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
INSTALLING DRILL BIT INTO KEYLESS CHUCK . . . . . . . . . . . . . . 13  
OPERATING THE DRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17  
VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 14  
FORWARD/REVERSE AND TRIGGER LOCK LEVER . . . . . . . . . . . . 14  
TORQUE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
HIGH/LOW SPEED (GEAR) SHIFTING . . . . . . . . . . . . . . . . . . . . . . 15  
SCREWDRIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
DRILLING METAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
DRILLING MASONRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
HINTS FOR OPTIMUM USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17  
GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS  
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to  
follow all instructions listed below may result in electric shock, fire and/or  
serious personal injury.  
SAVE THESE INSTRUCTIONS FOR  
FUTURE REFERENCE.  
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS  
The safety instructions provided in this manual are not intended to cover all possible  
conditions and practices that may occur when operating, maintaining and cleaning  
power tools.  
Always use common sense and pay particular attention to all the DANGER,  
WARNING, CAUTION and NOTE statements of this manual.  
This is the safety alert symbol. It is used to alert  
you to potential personal injury hazards. Obey all  
safety messages that follow this symbol to avoid  
possible injury or death.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
WORK AREA  
DANGER indicates an imminently hazardous  
situation which, if not avoided, will result in death  
or serious injury.  
Keep your work area clean and well lit. Cluttered work benches and dark work  
areas may cause accidents or injury.  
WARNING indicates a potentially hazardous  
situation which, if not avoided, could result in  
death or serious injury.  
Do not operate power tools in explosive areas, such as in the presence of  
flammable liquids, gases or dust. Power tools create sparks which may ignite  
the dust or fumes.  
CAUTION indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Keep bystanders, children and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
CAUTION used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
ELECTRICAL SAFETY  
NOTE provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
Do not abuse the cord. Never use the cord to carry the tool, pulling or unplug-  
ging the power tool. Keep the cord away from heat, oil, sharp edges, or mov-  
ing parts. Replace damaged cords immediately. Damaged cords may create  
a fire.  
IMPORTANT SAFEGUARDS  
Damaged or entangled cords increase the risk of electric shock.  
A battery operated tool with integral batteries or a separate battery pack  
must be recharged only with the specified charger for the battery. A charger  
that may be suitable for one type of battery may create a risk of fire when used with  
another battery.  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
Use battery operated tool only with specifically designated battery pack. Use of  
any other batteries may create risk of fire.  
WARNING: Some dust created by power sanding, sawing, grinding, drilling and  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
Power tool plugs must match the outlet. Never modify the plug in any way. Do  
not use any adapter plugs with grounded power tools. Unmodified plugs and  
matching outlets will reduce risk of electric shock.  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
Avoid body contact with grounded surfaces such as pipes, radiators, ranges  
and refrigerators. There is an increased risk of electric shock if your body is  
grounded.  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Do not expose power tools to rain or wet conditions. Water entering a power  
tool will increase the risk of electric shock.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
When operating a power tool outdoors, use an extension cord suitable for  
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric  
shock.  
WARNING: Handling the power cord on corded products may expose you to  
lead, a chemical known to the State of California to cause cancer and birth  
defects or other reproductive harm. Wash hands after handling.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERSONAL SAFETY  
Recharge only with the charger specified by the manufacturer. A charger that  
is suitable for one type of battery pack may create a risk of fire when used with  
another battery pack.  
Stay alert, watch what you are doing, and use common sense when operat-  
ing a power tool. Do not use tool while tired or under the influence of drugs,  
alcohol or medication. A moment of inattention while operating power tools  
may result in serious personal injury.  
Use power tools only with specifically designated battery packs. Use of any  
other battery packs may create a risk of injury and fire.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,  
jewelry or long hair can be caught in moving parts.  
When battery pack is not in use, keep it away from other metal objects like  
paper clips, coins, keys, nails, screws, or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery termi-  
nals together may cause burns or a fire.  
Avoid accidental starting. Be sure switch is in the locked or OFF” position before  
inserting battery pack. Carrying power tools with your finger on the switch or insert-  
ing battery pack into a tool with the power switch ON” invites accidents.  
Under abusive conditions, liquid may be ejected from the battery, avoid con-  
tact. If contact accidentally occurs, flush with water. If liquid contacts eyes,  
additionally seek medical help. Liquid ejected from the battery may cause irrita-  
tion or burns.  
Remove adjusting keys or wrenches before turning the tool ON. A wrench or a  
key that is left attached to a rotating part of the tool may result in personal injury.  
Do not overreach. Keep proper footing and balance at all times. Proper foot-  
Store idle tools out of reach of children and other untrained persons. Tools  
ing and balance enable better control of the tool in unexpected situations.  
are dangerous in the hands of untrained users.  
Use safety equipment. Always wear eye protection. Dust mask, non-skid safe-  
ty shoes, hard hat, or hearing protection must be used for appropriate conditions.  
When battery pack is not in use, keep it away from other metal objects like:  
paper clips, coins, keys, nails, screws, or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery termi-  
nals together may cause sparks, burns or a fire.  
If devices are provided for the connection of dust extraction and collection  
facilities, ensure these are connected and properly used. Use of these  
devices can reduce dust-related hazards.  
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained  
tools with sharp cutting edge are less likely to bind and are easier to control.  
TOOL USE AND CARE  
Check for misalignment or binding of moving parts, breakage of parts, and any  
other condition that may affect the tool’s operation. If damaged, have the tool  
serviced before using. Many accidents are caused by poorly maintained tools.  
Use clamps or other practical ways to secure and support the workpiece to a  
stable platform. Holding the work by hand or against your body is unstable and  
may lead to loss of control.  
Use only accessories that are recommended by the manufacturer for your  
model. Accessories that may be suitable for one tool may create a risk of injury  
when used on another tool.  
Do not force tool. Use the correct tool for your application. The correct tool  
will do the job better and safer at the rate for which it is designed.  
SERVICE  
Do not use the tool if the power switch does not turn it “ ON” or “ OFF” . A tool  
that cannot be controlled with the switch is dangerous and must be repaired.  
Tool service must be performed only by qualified repair personnel. Service  
or maintenance by unqualified personnel may result in a risk of injury.  
Disconnect battery pack from tool or place the switch in the locked or “ OFF”  
position before making any adjustments, changing accessories, or storing  
the tool. Such preventative safety measures reduce the risk of starting the tool  
accidentally.  
When servicing a tool, use only identical replacement parts. This will ensure  
that the safety of the power tool is maintained. Follow instructions in the  
Maintenance section of this manual. Use of unauthorized parts or failure to fol-  
low Maintenance Instructions may create a risk of shock or injury.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
SYMBOLS  
IMPORTANT: Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
Hold tool by insulated gripping surfaces when per-  
forming an operation where the cutting tool may contact hidden wiring.  
Contact with a live” wire will also make exposed metal parts of the tool  
“live” and shock the operator.  
SYMBOL  
NAME  
EXPLANATION  
V
A
Hz  
W
Kg  
Volts  
Amperes  
Hertz  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
SAFETY RULES FOR CORDLESS DRILL / DRIVERS  
Watt  
Always wear safety goggles or eye protection when using this tool. Use a  
dust mask or respirator for applications which generate dust.  
Kilograms  
Alternating Current  
Direct Current  
Do not grasp the tool or place your hands too close to the spinning chuck or  
drill bit. Your hand may be lacerated or may cause injury.  
Alternating or Direct Current Type of Current  
Secure the material being worked on. Never hold it in your hand or across  
your legs. Unstable support can cause loss of control and injury.  
Earthing Terminal  
Class II Construction  
Minutes  
Seconds  
Diameter  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
Size of Drill Bits,  
min  
s
Position yourself to avoid being caught between the tool or side handle and  
walls or posts. Should the socket or bit become bound in the work, the reac-  
tion torque of the tool could crush your hand or leg.  
Grinding Wheels, etc.  
No-load Rotational Speed  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
Speed, Torque or Position Settings  
Check to see that keys and adjusting wrenches are removed from the  
Cordless Drill before switching the tool “ ON” . Keys or wrenches can fly away  
at high velocity striking you or a bystander.  
No load speed  
Revolutions per Minute  
.../min  
When using the Cordless Drill, always maintain a firm grip on the tool with  
both hands.  
1,2,3, …  
Ring Selector Settings  
Hold tool by insulated gripping surfaces when performing an operation  
where the cutting tool may contact hidden wiring. Contact with a "live" wire  
will also make exposed metal parts of the tool "live" and shock the operator.  
Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.  
Do not run the Cordless Drill while carrying it at your side. A spinning sock-  
et or bit could become entangled with clothing and injury may result.  
Disconnect the plug or remove the battery pack from tool and place the switch in  
the locked or OFF” position before making any assembly adjustments, changing  
accessories, performing any inspection, maintenance or cleaning procedures.  
Such preventive safety measures reduce the risk of starting the tool accidentally.  
Do not use the Cordless Drill if it has been damaged, left outdoors in the  
rain, snow, wet or damp environments, or immersed in liquid.  
Maintain labels and nameplates on the Cordless Drill. These carry important  
information. If unreadable or missing, contact Alltrade for a replacement.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL DESCRIPTION  
BATTERY  
9
8
Before using battery pack, please read carefully all instruc-  
tions and cautionary markings on battery pack, battery  
charger and product using battery.  
6
7
®
Do not incinerate the battery pack even if it is severely  
damaged or is completely worn out. The battery pack can  
explode.  
10  
12  
5
14  
Do not carry battery packs in aprons, pockets, or tool boxes, product kit  
boxes, drawers, etc. with loose metal objects. Battery pack terminals could  
be short circuited causing damage to the battery pack, severe burns or fire.  
13  
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic  
material by the Environmental Protection Agency. Before disposing of dam-  
aged or worn out Ni-Cad battery packs, check with your State Environmental  
Protection Agency to find out about special restrictions on the disposal of these  
battery packs, take them to your local recycling center for proper disposal, or  
call 1-800-822-8837.  
11  
4
3
2
1
CONTROLS AND COMPONENTS:  
1. Battery Pack  
9. High/Low Speed Switch  
The battery is not fully charged. Before first use, the battery pack requires  
8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5  
hours for the battery to be fully charged.  
10. Variable Speed Controlled  
Trigger Switch  
2. Release Buttons on Each Side  
3. 120V AC Adapter  
11. Accessory/Bit Holder  
12. Comfort Rubber Grip  
13. Led Light  
4. Charger  
5. LED Charging Indicator  
6. 10mm (3/8") Keyless Chuck  
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
7. 24+1 Adjustable Torque Settings  
Control Ring  
8. Forward/Reversing and  
Trigger Lock Lever  
Never over-discharge a battery by using the tool even after tool performance  
has decreased. Do not attempt to discharge a tool’s battery by continuing to  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
ACCESSORIES:  
14. Double Ended Screwdriver Bits (2)  
Charge battery pack at ambient temperatures between 50° F – 104° F.  
COMPONENT  
BATTERY PACK  
120V AC ADAPTER  
CHARGER  
MODEL NUMBER  
Store tool and battery pack in locations where temperatures will not exceed  
120°F. This is important to prevent serious damage to the battery cells.  
691235  
690074  
690072  
The battery pack should always be recharged when the Cordless Drill begins to  
run slowly.  
10mm (3/8") KEYLESS CHUCK 690076  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery terminals  
together may cause sparks, burns, or fire.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the battery pack requires recharging, a 3-5 hour charge allows the tool to  
operate at full power. A charging indicator light on the charger will illuminate to  
show that charging is taking place.  
REMOVING/ATTACHING BATTERY PACK  
REMOVE BATTERY PACK:  
1. Press both release buttons on either side of  
the Cordless Drill to release the battery pack.  
CHARGING BATTERY PACK  
2. Pull battery pack free of Cordless Drill.  
BATTERY PACK  
CHARGE BATTERY PACK:  
ATTACH BATTERY PACK:  
1. Make sure the trigger  
on the Cordless Drill  
1. Align the raised portion of the battery pack  
with the groove in the battery compartment  
of the Cordless Drill.  
is in the OFF” position  
and remove the battery  
pack from the Cordless Drill.  
120V AC  
ADAPTER  
2. Press the battery pack into place. Make sure  
the latches are securely fastened. Do not use  
the Cordless Drill if the battery pack is not  
seated properly.  
RELEASE  
BUTTON  
2. Plug 120V AC Adapter  
into household outlet  
LED LIGHT  
and into side of battery  
charger. Insert battery  
pack into battery charger.  
When the battery is placed in  
the charger, the red LED  
indicator light will remain on.  
BATTERY  
CHARGER  
CHARGER  
3. When fully charged, reattach battery pack onto Cordless Drill, making certain  
latches fasten securely. Cordless Drill will not operate properly if the battery  
pack is not seated properly.  
Before using battery charger, please read carefully all  
instructions and cautionary markings on battery charger, battery pack and  
product using battery.  
The charger will not automatically turn “ OFF” when the  
battery pack is fully charged. The charging indicator light will remain ON”  
until the charger is disconnected from the electrical outlet.  
ASSEMBLY  
Be aware that this tool is always in an operating condition  
because it does not have to be plugged into an electrical outlet. Always turn  
the switch OFF” and remove the battery pack before changing bits.  
Use only the charger which accompanied your product or direct replacement as  
listed in this manual. Do not substitute any other charger. Use only Alltrade  
approved chargers with your product.  
Do not disassemble charger.  
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet  
or damp environments, or immersed in liquid.  
The battery pack and charger heat during charging. Place the charger on a flat,  
non-flammable surface away from flammable materials with at least four inches of  
clearance to allow proper air circulation around the charger and battery pack.  
11  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING DRILL BIT INTO KEYLESS CHUCK  
VARIABLE SPEED TRIGGER SWITCH  
THIS TOOL IS CONTROLLED  
WARNING  
BY A TRIGGER SWITCH:  
Before inserting a drill bit or other accessory, make sure the forward/reverse  
and trigger lock lever is in the center OFF” position to prevent accidental starts  
that may result in injury.  
The speed of the Cordless Drill depends  
on the amount of pressure you put on the  
trigger.  
TRIGGER  
SWITCH  
Do not attempt to tighten drill bits (or any other accessory) by gripping the  
front of the chuck and turning the tool on. This may cause personal injury  
and/or damage to the chuck.  
The more pressure you apply, the faster  
the Cordless Drill will go.  
LED LIGHT  
Release the pressure and the Cordless  
Drill will slow down.  
When removing the bit from the tool, avoid contact with skin and use proper  
protective gloves when grasping the bit or accessory. Accessories may be hot  
after prolonged use.  
BUILT IN LED LAMP  
Press the trigger switch to light up the lamp. The lamp remains on while the  
trigger switch is being pressed. The lamp goes out after releasing the trigger.  
1. Hold the rear end of the chuck in  
HOLD HERE  
one hand and use the other hand to  
RELEASE  
rotate the front end in a counter-  
NOTE: Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch  
the lens of lamp, or it may lower the illumination.  
clockwise direction to open the jaws  
of the chuck.  
2. Insert the shank of the bit (or other  
Do not look into light or see the source of light directly.  
GRIP  
accessory) fully into the keyless  
chuck, taking care to keep the bit in  
the center of the jaws of the chuck.  
FORWARD/REVERSE AND TRIGGER LOCK LEVER  
HOLD HERE  
3. Turn the front end of the chuck clockwise to hold the bit in place.  
4. Tighten securely by turning the front end of the chuck clockwise while holding  
the rear end.  
Be sure the trigger is released when changing the position of the lever.  
Always store the tool in the “ LOCKED/OFF” position.  
Always check the direction of the Cordless Drill's rotation before use.  
OPERATING THE DRILL  
TO SELECT THE DIRECTIONS  
OF ROTATION:  
To select forward Cordless Drill  
Never tape the trigger switch down to provide continu-  
ous high speed. The tool may fail under such conditions causing fire or  
personal injury.  
rotation, press the trigger lock from  
FORWARD  
LOCK  
left to right flat against the Cordless  
Drill body.  
REVERSE  
TRIGGER  
LOCK  
To select reverse, press the trigger  
lock lever in the opposite direction.  
The center position locks the tool.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TORQUE SETTINGS  
SCREWDRIVING  
WHEN DRIVING FASTENERS:  
Always start slowly and gradually increase the speed of the Drill.  
To prevent damaging the tool or driving screw too deep  
into work piece, release the trigger when you feel the clutch slip.  
Release the trigger when you feel the clutch slip.  
CONTROL RING  
Always keep the driver bit straight to prevent damage to the screw.  
Hold the Drill with both hands to ensure control if the bit should stick or slip.  
THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE:  
For light duty work, use lower settings.  
For heavy duty work, use higher settings.  
To prevent wood from splitting, drill pilot holes into the wood before driving  
in the screws.  
PROPER SETTING FOR DRIVING SCREWS:  
1. Set the ring on the lowest  
setting to begin.  
DRILLING METAL  
2. Try tightening the first screw.  
If the drill drives smoothly,  
proceed with the next screw.  
WHEN DRILLING HARD METALS:  
Apply a lubricant, such as cutting oil, to the tip of the bit.  
Start with a small hole then enlarge to the required size. Make sure the bit is  
actually cutting and not spinning in the hole as this will dull the edges of the bit.  
3. If the Drill’s clutch slips,  
increase the torque setting  
and try again until the Drill  
drives the screw without incident.  
Keep enough pressure on the bit to keep it drilling through the material.  
DRILLING MASONRY  
WHEN DRILLING MASONRY:  
• Masonry can be brittle so be careful not to apply too much pressure and crack  
the material.  
HIGH/LOW SPEED (GEAR) SHIFTING  
FOR LOW SPEED SETTING:  
Slide the switch on top of the  
Drill to Position 1 for high  
torque applications and driv-  
ing screws.  
LOW SPEED  
HIGH SPEED  
Apply enough pressure to keep the bit cutting and not spinning in the hole as this  
will dull the edges of the bit.  
Bricks and similar soft materials will require less pressure, concrete will require  
much more.  
FOR HIGH SPEED SETTING:  
Slide the switch to Position 2  
for light duty projects.  
DRILLING WOOD  
Use twist bits to drill holes in wood. Make sure the bits are sharp. Pull the bits  
out of the hole frequently to clear chips from the flutes as an overburdened bit  
may overheat.  
HINTS FOR OPTIMUM USE  
DRILLING:  
Keep the right amount of pressure in a straight line with the drill bit. Too little and  
the bit will spin without cutting, too much and the motor may stall.  
15  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Just before the drill tip breaks though the other side of the work piece drill more  
slowly and decrease pressure on the tool. This will prevent stalling and leave a  
cleaner hole.  
Regularly clean the ventilation slots in your tool and charger using only a soft  
brush or dry cloth.  
Never open the Cordless Drill case, battery pack or charger. Do not attempt to  
repair the Cordless Drill, battery pack or charger yourself. Opening any of these  
parts will void your warranty.  
Use a block of wood to back up work pieces that may splinter.  
Use spade bits when drilling large diameter holes in wood.  
Use HSS drill bits when drilling in metal.  
ACCESSORIES  
Use masonry bits when drilling in soft masonry.  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
Use a lubricant when drilling metals other than cast iron, aluminum, copper,  
and brass.  
When drilling, start the hole slowly, allowing the bit to drill deep enough to prevent  
slipping at higher speeds.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
If you must use an extension cord, be sure that the gauge is large enough to carry  
the amount of current necessary for your power tool. If not, your tool may experi-  
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge  
number, the heavier the cord (see table on next page).  
Never try to start a stalled Drill by clicking the trigger switch ON” and OFF” .  
This may damage your tool.  
To reduce jamming, always keep the Drill running when pulling the bit out of a  
finished hole.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
SCREWDRIVING:  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
Always use the correct type and size of screwdriver bit.  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
• If screws are difficult to tighten, try applying a small amount of washing liquid or  
soap as a lubricant.  
18  
16  
14  
14  
-
Always hold the tool and screwdriver bit in a straight line with the screw.  
MAINTENANCE AND CLEANING  
14  
12  
12  
12  
12  
12  
-
Always remove the battery pack before attempting  
cleaning or maintenance.  
This Cordless Drill is lubricated before it leaves the  
factory. This lubrication should last for the life of the tool. No further  
lubrication is required.  
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get  
inside the casing. Never immerse any part of the tool in a liquid. Always keep the  
ventilation openings clear.  
Always clean the battery pack using only a dry cloth. Do not use liquids.  
Always unplug the charger before cleaning it.  
17  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This  
Kawasaki™ portable power tool is offered as a home use tool and carries a HOME  
USE WARRANTY. This tool is made for home use in the execution of  
projects and repairs in and around the home. Use of the tool for COMMERCIAL  
PURPOSES OR ON A JOBSITE is not covered under this warranty.  
SPECIFICATIONS  
SPECIFICATIONS  
Voltage  
19.2V  
No Load Low Speed  
No Load High Speed  
Torque Settings  
Chuck Capacity  
Charger Input  
0-400/min.  
0-1100/min.  
24+1 Drill  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified, altered or used for any commercial purpose or on  
a jobsite. This warranty does not apply to any other product and/or component  
thereof manufactured or distributed by Alltrade, and does not apply to products  
and/or components thereof designed, manufactured and/or assembled by others,  
for which Alltrade makes no warranties whatsoever. THERE ARE NO WARRANTIES  
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.  
Up to 10mm (3/8")  
120V  
60Hz  
Charging Time  
Battery Type  
Approx. 3-5 hours  
Ni-Cad  
PROTECTING THE ENVIRONMENT  
BATTERIES  
Warranty Performance  
Alltrade batteries can be recharged many times. At the end of their useful life,  
recycle batteries with due care for our environment.  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center  
or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
Reciprocating Saws  
Routers  
Rotary Tools  
Jigsaws  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
Circular Saws  
Angle Grinders  
2 YEAR LIMITED HOME USE WARRANTY  
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ portable power tool and no one else  
all parts of the product (except those parts referred to below which are specifically  
excluded from such warranty (see Exclusions)) to be free from defects in materials  
and workmanship for a period of two years from original date of purchase.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
Exclusions  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
Warranty Disclaimers  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENT  
#840051  
19.2V BATTERY PACK  
INSTRUCTION MANUAL  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
87-1904-60957  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS  
PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT  
LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™  
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR  
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE  
DIRECTED TO:  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS  
PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL,  
HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR  
COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US.  
1-800-590-3723  
Printed in China  
Imprimé dans la Chine  
Impreso en China  
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
LONG BEACH, CA 90810-1462 USA  
840051 – 19.2V Battery Pack_Rev 7/24/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONGRATULATIONS!  
CAUTION used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality  
products at an affordable price, and we want you to be totally satisfied with your  
product and our Customer Service. If any help and advice is needed, please  
contact us at 1-800-590-3723. Properly cared for, this tool will give you many  
years of satisfaction.  
NOTE provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
INTENDED USE  
BATTERY  
This tool is intended for consumer use only. Your charger and/or adapter has been  
designed for charging batteries of the type approved and supplied with this tool.  
Before using battery pack, please read carefully all instruc-  
tions and cautionary markings on battery pack, battery charg-  
er and product using battery.  
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS  
The safety instructions provided in this manual are not intended to cover all possible  
conditions and practices that may occur when operating, maintaining and cleaning  
power tools.  
®
Do not incinerate the battery pack even if it is severely dam-  
aged or is completely worn out. The battery pack can explode.  
Do not carry battery packs in aprons, pockets, or tool boxes, product kit  
boxes, drawers, etc. with loose metal objects. battery pack terminals could  
be short circuited causing damage to the battery pack, severe burns or fire.  
Always use common sense and pay particular attention to all the DANGER,  
WARNING, CAUTION and NOTE statements of this manual.  
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic  
material by the Environmental Protection Agency. Before disposing of dam-  
aged or worn out Ni-Cad battery packs, check with your State Environmental  
Protection Agency to find out about special restrictions on the disposal of these  
battery packs, take them to your local recycling center for proper disposal, or  
call 1-800-822-8837.  
This is the safety alert symbol. It is used to alert  
you to potential personal injury hazards. Obey all  
safety messages that follow this symbol to avoid  
possible injury or death.  
DANGER indicates an imminently hazardous  
situation which, if not avoided, will result in death  
or serious injury.  
The battery is not fully charged. Before first use, the battery pack requires  
8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5  
hours for the battery to be fully charged.  
WARNING indicates a potentially hazardous  
situation which, if not avoided, could result in  
death or serious injury.  
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
CAUTION indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Never over-discharge a battery by using the tool even after tool performance  
has decreased. Do not attempt to discharge a tool’s battery by continuing to  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Charge battery pack at ambient temperatures between 50° F – 104° F.  
PROTECTING THE ENVIRONMENT  
Store tool and battery pack in locations where temperatures will not exceed  
120°F. This is important to prevent serious damage to the battery cells.  
BATTERIES  
Alltrade batteries can be recharged many times. At the end of their useful life, recy-  
cle batteries with due care for our environment.  
The battery pack should always be recharged when the Cordless Drill begins to  
run slowly.  
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery terminals  
together may cause sparks, burns, or fire.  
or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
SYMBOLS  
IMPORTANT: Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
SYMBOL  
NAME  
Volts  
Amperes  
Hertz  
Watt  
Kilograms  
Alternating Current  
Direct Current  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
Jigsaws  
V
A
Hz  
W
Kg  
Circular Saws  
Angle Grinders  
Reciprocating Saws  
Routers  
Rotary Tools  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
Alternating or Direct Current Type of Current  
Earthing Terminal  
Class II Construction  
Minutes  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
min  
s
Seconds  
Diameter  
Size of Drill Bits,  
Grinding Wheels, etc.  
No load speed  
No-load Rotational Speed  
.../min  
Revolutions per Minute  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
1,2,3, …  
Ring Selector Settings  
Speed, Torque or Position Settings  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
2 YEAR LIMITED HOME USE WARRANTY  
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ portable power tool and no one else  
all parts of the product (except those parts referred to below which are specifically  
excluded from such warranty (see Exclusions)) to be free from defects in materials  
and workmanship for a period of two years from original date of purchase.  
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This  
Kawasaki™ portable power tool is offered as a home use tool and carries a HOME  
USE WARRANTY. This tool is made for home use in the execution of  
projects and repairs in and around the home. Use of the tool for COMMERCIAL  
PURPOSES OR ON A JOBSITE is not covered under this warranty.  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified, altered or used for any commercial purpose or on  
a jobsite. This warranty does not apply to any other product and/or component  
thereof manufactured or distributed by Alltrade, and does not apply to products  
and/or components thereof designed, manufactured and/or assembled by others,  
for which Alltrade makes no warranties whatsoever. THERE ARE NO WARRANTIES  
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.  
Exclusions  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
Warranty Performance  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #310-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Disclaimers  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Cooktop KD6E35W User Manual
Indesit Freezer UFAN 300 User Manual
ION Guitar DISCOVER GUITAR USB User Manual
Jenn Air Cooktop JGCP430 User Manual
JL Audio Car Speaker VR650 CXi User Manual
JVC Car Stereo System 0409DTSMDTJEIN User Manual
Kathrein Car Satellite TV System UFC 662sw User Manual
Kenmore Water Heater 15333114 User Manual
Kenwood DVD Player DVR 505 User Manual
Klipsch Speaker System Quintet SL User Manual