Kawasaki Drill 840131 1HR User Manual

COMPONENT  
#840131-1HR  
19.2V 2-SPEED BATTERY-OPERATED DRILL  
INSTRUCTION MANUAL  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,  
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND  
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO  
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE  
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE  
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION  
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE  
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected].  
YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™  
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR  
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE  
DIRECTED TO:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
LONG BEACH, CA 90810-1462 USA  
1-800-590-3723  
Printed in China  
840131 – 19.2V Green Cordless Drill_Rev 8/26/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WORK AREA  
DANGER indicates an imminently hazardous  
situation which, if not avoided, will result in death  
or serious injury.  
Keep your work area clean and well lit. Cluttered work benches and dark work  
areas may cause accidents or injury.  
WARNING indicates a potentially hazardous  
situation which, if not avoided, could result in  
death or serious injury.  
Do not operate power tools in explosive areas, such as in the presence of  
flammable liquids, gases or dust. Power tools create sparks which may ignite  
the dust or fumes.  
CAUTION indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Keep bystanders, children and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
CAUTION used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
ELECTRICAL SAFETY  
NOTE provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord  
away from heat, oil, sharp edges, or moving parts. Replace damaged cords  
immediately. Damaged cords may create a fire.  
IMPORTANT SAFEGUARDS  
A battery operated tool with integral batteries or a separate battery pack  
must be recharged only with the specified charger for the battery. A charger  
that may be suitable for one type of battery may create a risk of fire when used with  
another battery.  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
Use battery operated tool only with specifically designated battery pack. Use of  
any other batteries may create risk of fire.  
WARNING: Some dust created by power sanding, sawing, grinding, drilling and  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
PERSONAL SAFETY  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
Stay alert, watch what you are doing, and use common sense when operat-  
ing a power tool. Do not use tool while tired or under the influence of drugs,  
alcohol or medication. A moment of inattention while operating power tools  
may result in serious personal injury.  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,  
jewelry or long hair can be caught in moving parts.  
Avoid accidental starting. Be sure switch is in the locked or OFF” position  
before inserting battery pack. Carrying power tools with your finger on the switch  
or inserting battery pack into a tool with the power switch ON” invites accidents.  
WARNING: Handling the power cord on corded products may expose you to  
lead, a chemical known to the State of California to cause cancer and birth  
defects or other reproductive harm. Wash hands after handling.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE  
Tool service must be performed only by qualified repair personnel. Service or  
maintenance by unqualified personnel may result in a risk of injury.  
Remove adjusting keys or wrenches before turning the tool ON. A wrench or a  
key that is left attached to a rotating part of the tool may result in personal injury.  
When servicing a tool, use only identical replacement parts. Follow instructions  
in the Maintenance section of this manual. Use of unauthorized parts or failure to  
follow Maintenance Instructions may create a risk of shock or injury.  
Do not overreach. Keep proper footing and balance at all times. Proper foot-  
ing and balance enable better control of the tool in unexpected situations.  
Use safety equipment. Always wear eye protection. Dust mask, non-skid safe-  
ty shoes, hard hat, or hearing protection must be used for appropriate conditions.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
TOOL USE AND CARE  
Hold tool by insulated gripping surfaces when perform-  
ing an operation where the cutting tool may contact hidden wiring. Contact  
with a “live” wire will also make exposed metal parts of the tool live” and shock  
the operator.  
Use clamps or other practical ways to secure and support the workpiece to a  
stable platform. Holding the work by hand or against your body is unstable and  
may lead to loss of control.  
SAFETY RULES FOR CORDLESS DRILL / DRIVERS  
Do not force tool. Use the correct tool for your application. The correct tool  
will do the job better and safer at the rate for which it is designed.  
Always wear safety goggles or eye protection when using this tool. Use a  
dust mask or respirator for applications which generate dust.  
Do not use the tool if the power switch does not turn it ON” or OFF. A tool that  
cannot be controlled with the switch is dangerous and must be repaired.  
Do not grasp the tool or place your hands too close to the spinning chuck or  
drill bit. Your hand may be lacerated or may cause injury.  
Disconnect battery pack from tool or place the switch in the locked or OFF” posi-  
tion before making any adjustments, changing accessories, or storing the tool.  
Such preventative safety measures reduce the risk of starting the tool accidentally.  
Secure the material being worked on. Never hold it in your hand or across  
your legs. Unstable support can cause loss of control and injury.  
Store idle tools out of reach of children and other untrained persons. Tools  
are dangerous in the hands of untrained users.  
Position yourself to avoid being caught between the tool or side handle and  
walls or posts. Should the socket or bit become bound in the work, the  
reaction torque of the tool could crush your hand or leg.  
When battery pack is not in use, keep it away from other metal objects like:  
paper clips, coins, keys, nails, screws, or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery termi-  
nals together may cause sparks, burns or a fire.  
Check to see that keys and adjusting wrenches are removed from the  
Cordless Drill before switching the tool “ ON” . Keys or wrenches can fly away  
at high velocity striking you or a bystander.  
When using the Cordless Drill, always maintain a firm grip on the tool with both  
hands.  
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained  
tools with sharp cutting edge are less likely to bind and are easier to control.  
Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.  
Check for misalignment or binding of moving parts, breakage of parts, and any  
other condition that may affect the tool’s operation. If damaged, have the tool  
serviced before using. Many accidents are caused by poorly maintained tools.  
Do not run the Cordless Drill while carrying it at your side. A spinning  
socket or bit could become entangled with clothing and injury may result.  
Use only accessories that are recommended by the manufacturer for your  
model. Accessories that may be suitable for one tool may create a risk of injury  
when used on another tool.  
Disconnect the plug or remove the battery pack from tool and place the switch  
in the locked or OFF” position before making any assembly adjustments,  
changing accessories, performing any inspection, maintenance or cleaning  
procedures. Such preventive safety measures reduce the risk of starting the  
tool accidentally.  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL DESCRIPTION  
8
6
10  
Do not use the Cordless Drill if it has been damaged, left outdoors in the  
rain, snow, wet or damp environments, or immersed in liquid.  
5
Maintain labels and nameplates on the Cordless Drill. These carry important  
12  
information. If unreadable or missing, contact Alltrade for a replacement.  
SYMBOLS  
7
3
9
IMPORTANT: Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
11  
2
SYMBOL  
NAME  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
V
A
Hz  
W
Kg  
Volts  
Amperes  
Hertz  
4
1
Watt  
CONTROLS AND COMPONENTS:  
1. Battery Pack  
2. Release Buttons on Each Side  
3. Charger  
8. High/Low Speed Switch  
9. Variable Speed Controlled  
Trigger Switch  
Kilograms  
Alternating Current  
Direct Current  
Weight  
Type of Current  
Type of Current  
10. Accessory/Bit Holder  
11. Comfort Rubber Grip  
4. Indicator Lights  
5. 12.7mm (1/2") Keyless Chuck  
6. 22 Adjustable Torque Settings  
Control Ring  
7. Forward/Reversing and  
Trigger Lock Lever  
Alternating or Direct Current Type of Current  
Earthing Terminal  
Class II Construction  
Minutes  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
ACCESSORIES:  
12. Double Ended Screwdriver Bits (2)  
min  
s
Seconds  
Diameter  
Size of Drill Bits,  
Grinding Wheels, etc.  
No load speed  
Revolutions per Minute  
No-load Rotational Speed  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
COMPONENT  
BATTERY PACK  
CHARGER  
MODEL NUMBER  
690549  
690543  
.../min  
1,2,3, …  
Ring Selector Settings  
Speed, Torque or Position Settings  
12.7mm (1/2") KEYLESS CHUCK 690552  
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
BATTERY  
REMOVING/ATTACHING BATTERY PACK  
REMOVE BATTERY PACK:  
1. Press both release buttons on either  
side of the Cordless Drill to release  
the battery pack.  
Before using battery pack, please read carefully all instruc-  
tions and cautionary markings on battery pack, battery  
charger and product using battery.  
2. Pull battery pack free of Cordless Drill.  
®
Do not incinerate the battery pack even if it is severely dam-  
aged or is completely worn out. The battery pack can explode.  
ATTACH BATTERY PACK:  
1. Align the raised portion of the battery  
pack with the groove in the battery  
compartment of the Cordless Drill.  
Do not carry battery packs in aprons, pockets, or tool  
boxes, product kit boxes, drawers, etc. with loose metal objects. Battery  
pack terminals could be short circuited causing damage to the battery pack,  
severe burns or fire.  
2. Press the battery pack  
into place. Make sure the  
latches are securely fastened.  
Do not use the Cordless  
Drill if the battery pack is  
not seated properly.  
RELEASE BUTTON  
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic  
material by the Environmental Protection Agency. Before disposing of dam-  
aged or worn out Ni-Cad battery packs, check with your State Environmental  
Protection Agency to find out about special restrictions on the disposal of these  
battery packs, take them to your local recycling center for proper disposal, or  
call 1-800-822-8837.  
CHARGER  
Before using battery charger, please read carefully all  
instructions and cautionary markings on battery charger, battery pack and  
product using battery.  
The battery is not fully charged. Before first use, the battery pack requires  
3-5 hours charge time to be fully charged. Subsequent recharging needs 1 hour  
for the battery to be fully charged.  
Use only the charger which accompanied your product or direct replacement as  
listed in this manual. Do not substitute any other charger. Use only Alltrade  
approved chargers with your product.  
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
Do not disassemble charger.  
Never over-discharge a battery by using the tool even after tool performance  
has decreased. Do not attempt to discharge a tool’s battery by continuing to  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet  
or damp environments, or immersed in liquid.  
The battery pack and charger heat during charging. Place the charger on a flat,  
non-flammable surface away from flammable materials with at least four inches of  
clearance to allow proper air circulation around the charger and battery pack.  
Charge battery pack at ambient temperatures between 50° F – 104° F.  
Store tool and battery pack in locations where temperatures will not exceed  
When the battery pack requires recharging, a 1 hour charge allows the tool to  
operate at full power. A charging indicator light on the charger will illuminate to  
show that charging is taking place.  
120°F. This is important to prevent serious damage to the battery cells.  
The battery pack should always be recharged when the Cordless Drill begins to  
run slowly.  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery terminals  
together may cause sparks, burns, or fire.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHARGING BATTERY PACK  
ASSEMBLY  
CHARGE BATTERY PACK:  
1. Plug the charger into  
the nearest 120 volt  
electrical outlet.  
BATTERY PACK  
Be aware that this tool is always in an operating condition  
because it does not have to be plugged into an electrical outlet. Always turn  
the switch OFF” and remove the battery pack before changing bits.  
2. Make sure the trigger  
on the Cordless Drill  
is in the OFF”  
INSTALLING DRILL BIT INTO KEYLESS CHUCK  
LED  
LIGHT  
position and remove  
the battery pack from  
the Cordless Drill.  
WARNING  
Before inserting a drill bit or other accessory, make sure the forward/reverse  
and trigger lock lever is in the center OFF” position to prevent accidental starts  
that may result in injury.  
3. Insert the battery pack  
into the charger. Be sure  
that the battery pack is  
BATTERY  
CHARGER  
Do not attempt to tighten drill bits (or any other accessory) by gripping the  
front of the chuck and turning the tool on. This may cause personal injury  
and/or damage to the chuck.  
fully seated in the charger.  
Do not force.  
4. The red indicator light should come ON” indicating that the battery pack is in  
a “Fast Charge” mode. If the green indicator light comes ON” , then the battery  
is already fully charged.  
When removing the bit from the tool, avoid contact with skin and use proper  
protective gloves when grasping the bit or accessory. Accessories may be hot  
after prolonged use.  
5. After approximately one hour of charging, the red indicator light should go  
OFF” and the green light should come ON” indicating that the battery is fully  
charged and the charger is now in a Trickle Charge” mode.  
1. Hold the rear end of the chuck  
in one hand and use the other  
hand to rotate the front end in a  
counterclockwise direction to  
open the jaws of the chuck.  
HOLD  
LOOSEN  
TIGHTEN  
6. The battery can be left in a Trickle Charge” mode until ready to use.  
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES  
When using your Cordless Drill continuously, the batteries in your battery pack  
will become hot. You should let a hot battery pack cool down for approximately  
30 minutes before attempting to recharge. When the battery pack becomes  
discharged and is hot, the red light on the charger will flash. When the battery  
pack cools down, the red light will glow continuously to indicate fast charging  
mode, 1-hour charge time.  
2. Insert the shank of the bit (or  
other accessory) fully into the  
keyless chuck, taking care to  
keep the bit in the center of  
the jaws of the chuck.  
3. Turn the front end of the chuck clockwise to hold the bit in place.  
4. Tighten securely by turning the front end of the chuck clockwise while holding  
the rear end.  
This will occur when continuous use of your Cordless  
Drill causes the battery pack to become hot. It does not occur under normal  
circumstances.  
OPERATING THE DRILL  
Never tape the trigger switch down to provide continu-  
ous high speed. The tool may fail under such conditions causing fire or  
personal injury.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL RING  
THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE:  
For light duty work, use lower settings.  
VARIABLE SPEED TRIGGER SWITCH  
THIS TOOL IS CONTROLLED  
For heavy duty work, use higher settings.  
BY A TRIGGER SWITCH:  
PROPER SETTING FOR DRIVING SCREWS:  
1. Set the ring on the lowest  
setting to begin.  
The speed of the Cordless Drill depends  
on the amount of pressure you put on the  
trigger.  
TRIGGER  
SWITCH  
2. Try tightening the first screw.  
If the drill drives smoothly,  
proceed with the next screw.  
The more pressure you apply, the faster  
the Cordless Drill will go.  
Release the pressure and the Cordless Drill  
will slow down.  
3. If the Drill’s clutch slips,  
increase the torque setting  
and try again until the Drill  
drives the screw without incident.  
FORWARD/REVERSE AND TRIGGER LOCK LEVER  
HIGH/LOW SPEED (GEAR) SHIFTING  
LOW SPEED  
HIGH SPEED  
FOR LOW SPEED SETTING:  
Slide the switch on top of the  
Drill to Position 1 for high  
torque applications and driving  
screws.  
Be sure the trigger is released when changing the position of the lever.  
Always store the tool in the “ LOCKED/OFF” position.  
Always check the direction of the Cordless Drill's rotation before use.  
FOR HIGH SPEED SETTING:  
Slide the switch to Position 2  
for light duty projects.  
TO SELECT THE DIRECTIONS  
OF ROTATION:  
To select forward Cordless Drill  
rotation, press the trigger lock  
TRIGGER  
from left to right flat against the Cordless  
LOCK  
Drill body.  
To select reverse, press the trigger lock  
lever in the opposite direction.  
The center position locks the tool.  
SCREWDRIVING  
WHEN DRIVING FASTENERS:  
Always start slowly and gradually increase the speed of the Drill.  
TORQUE SETTINGS  
Release the trigger when you feel the clutch slip.  
To prevent damaging the tool or driving screw too deep  
Always keep the driver bit straight to prevent damage to the screw.  
into work piece, release the trigger when you feel the clutch slip.  
Hold the Drill with both hands to ensure control if the bit should stick or slip.  
To prevent wood from splitting, drill pilot holes into the wood before driving  
in the screws.  
13  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Never try to start a stalled Drill by clicking the trigger switch ON” and OFF” .  
This may damage your tool.  
DRILLING METAL  
WHEN DRILLING HARD METALS:  
To reduce jamming, always keep the Drill running when pulling the bit out of a  
finished hole.  
Apply a lubricant, such as cutting oil, to the tip of the bit.  
Start with a small hole then enlarge to the required size. Make sure the bit is  
actually cutting and not spinning in the hole as this will dull the edges of the bit.  
SCREWDRIVING:  
Always use the correct type and size of screwdriver bit.  
Keep enough pressure on the bit to keep it drilling through the material.  
• If screws are difficult to tighten, try applying a small amount of washing liquid or  
soap as a lubricant.  
DRILLING MASONRY  
WHEN DRILLING MASONRY:  
Always hold the tool and screwdriver bit in a straight line with the screw.  
• Masonry can be brittle so be careful not to apply too much pressure and crack  
the material.  
MAINTENANCE AND CLEANING  
Apply enough pressure to keep the bit cutting and not spinning in the hole as this  
will dull the edges of the bit.  
Always remove the battery pack before attempting  
cleaning or maintenance.  
Bricks and similar soft materials will require less pressure, concrete will require  
much more.  
This Cordless Drill is lubricated before it leaves the  
factory. This lubrication should last for the life of the tool. No further  
lubrication is required.  
DRILLING WOOD  
Use twist bits to drill holes in wood. Make sure the bits are sharp. Pull the bits  
out of the hole frequently to clear chips from the flutes as an overburdened bit  
may overheat.  
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get  
inside the casing. Never immerse any part of the tool in a liquid. Always keep the  
ventilation openings clear.  
HINTS FOR OPTIMUM USE  
Always clean the battery pack using only a dry cloth. Do not use liquids.  
Always unplug the charger before cleaning it.  
DRILLING:  
Keep the right amount of pressure in a straight line with the drill bit. Too little and  
the bit will spin without cutting, too much and the motor may stall.  
Regularly clean the ventilation slots in your tool and charger using only a soft  
brush or dry cloth.  
• Just before the drill tip breaks though the other side of the work piece drill more  
slowly and decrease pressure on the tool. This will prevent stalling and leave a  
cleaner hole.  
Never open the Cordless Drill case, battery pack or charger. Do not attempt to  
repair the Cordless Drill, battery pack or charger yourself. Opening any of these  
parts will void your warranty.  
Use a block of wood to back up work pieces that may splinter.  
Use spade bits when drilling large diameter holes in wood.  
Use HSS drill bits when drilling in metal.  
Use masonry bits when drilling in soft masonry.  
Use a lubricant when drilling metals other than cast iron, aluminum, copper,  
and brass.  
When drilling, start the hole slowly, allowing the bit to drill deep enough to prevent  
slipping at higher speeds.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
PROTECTING THE ENVIRONMENT  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
BATTERIES  
Alltrade batteries can be recharged many times. At the end of their useful life,  
recycle batteries with due care for our environment.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center  
or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.  
If you must use an extension cord, be sure that the gauge is large enough to carry  
the amount of current necessary for your power tool. If not, your tool may experi-  
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge  
number, the heavier the cord (see table below).  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
18  
16  
14  
14  
-
Jigsaws  
Circular Saws  
14  
12  
12  
12  
12  
12  
Angle Grinders  
-
Reciprocating Saws  
Routers  
SPECIFICATIONS  
Rotary Tools  
SPECIFICATIONS  
Voltage  
Low Speed  
High Speed  
Torque Settings  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
19.2V  
0-440/min.  
0-1500/min.  
21+ Drill  
Chuck Capacity (max)  
Charger Input  
13mm (1/2")  
120V  
60Hz  
Charging Time  
Battery Type  
Approx. 1 hour  
Ni-Cad  
17  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
3 YEAR LIMITED WARRANTY  
Express and Exclusive Limited Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ power tool and no one else all parts  
of the product (except those parts referred to below which are specifically exclud-  
ed from such warranty (see Exclusions)) to be free from defects in materials and  
workmanship for a period of three years from original date of purchase, except that  
such warranty with regard to the battery shall be for a period of two years from  
original date of purchase, unless the tool is used for commercial or rental  
purposes.  
SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE: The above  
warranty for this Kawasaki™ power tool, including the battery, shall be effective for  
only 90 days from the original date of purchase if this tool is used for any  
COMMERCIAL OR RENTAL PURPOSE.  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified or altered. This warranty does not apply to any  
other product and/or component thereof manufactured or distributed by Alltrade,  
and does not apply to products and/or components thereof designed, manufactured  
and/or assembled by others, for which Alltrade makes no warranties whatsoever.  
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON  
THE FACE HEREOF.  
Exclusions  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
Warranty Performance  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
19  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Disclaimers  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
21  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENT  
#690850-1HR  
19.2V BATTERY-OPERATED  
RECIPROCATING SAW  
INSTRUCTION MANUAL  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,  
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND  
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE  
TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE  
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER  
SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING  
INFORMATION AVAILABLE: MODEL NO., DATE PURCHASED AND STORE LOCATION. AN  
ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU  
WOULD LIKE TO MAKE A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT:  
INFO@ALLTRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,  
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.  
CONSUMER INQUIRES SHOULD BE DIRECTED TO:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
1-800-590-3723  
LONG BEACH, CA 90810-1462 USA  
Printed in China  
690850 – 19.2V Green Cordless Reciprocating Saw, _Rev. 10/10/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
CONGRATULATIONS!  
CONGRATULATIONS!  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality  
products at an affordable price, and we want you to be totally satisfied with your  
product and our Customer Service. If any help and advice is needed, please  
contact us at 1-800-590-3723. Properly cared for, this tool will give you many  
years of satisfaction.  
INTENDED USE  
SECTION ONE  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
GENERAL SAFETY RULESFOR ALL BATTERY OPERATED TOOLS . . 2  
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3  
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6  
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
INTENDED USE  
This tool is intended for consumer use only. Your charger and/or adapter has been  
designed for charging batteries of the type approved and supplied with this tool.  
GENERAL SAFETY RULESFOR ALL BATTERY OPERATED TOOLS  
SECTION TWO  
SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6  
SAFETY RULES FOR CORDLESS RECIPROCATING SAW . . . . . . . . 6-7  
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
SECTION THREE  
READ AND UNDERSTAND ALL INSTRUCTIONS.  
follow all instructions listed below may result in electric shock, fire and/or  
serious personal injury.  
Failure to  
FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12  
REMOVING/ATTACHING BATTERY PACK . . . . . . . . . . . . . . . . . . . . 11  
CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
CHARGING BATTERY PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
ATTACHING/REMOVING BLADE . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
OPERATING THE RECIPROCATING SAW . . . . . . . . . . . . . . . . . . . . . . . 14-17  
VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 14  
GENERAL CUTTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
PLUNGE CUTTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
METAL CUTTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17  
SECTION FOUR  
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS  
The safety instructions provided in this manual are not intended to cover all possible  
conditions and practices that may occur when operating, maintaining and cleaning  
power tools.  
DANGER  
Always use common sense and pay particular attention to all the  
WARNING CAUTION NOTE  
,
,
and  
statements of this manual.  
This is the safety alert symbol. It is used to alert  
you to potential personal injury hazards. Obey all  
safety messages that follow this symbol to avoid  
possible injury or death.  
DANGER  
indicates an imminently hazardous  
situation which, if not avoided, will result in death  
or serious injury.  
MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 19  
SECTION FIVE  
WARNING  
indicates a potentially hazardous  
situation which, if not avoided, could result in  
death or serious injury.  
2
3 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WORK AREA  
CAUTION  
indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Keep your work area clean and well lit.  
areas may cause accidents or injury.  
Cluttered work benches and dark work  
CAUTION  
used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
Do not operate power tools in explosive areas, such as in the presence of  
flammable liquids, gases or dust.  
the dust or fumes.  
Power tools create sparks which may ignite  
NOTE  
provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
Keep bystanders, children and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
IMPORTANT SAFEGUARDS  
ELECTRICAL SAFETY  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord  
away from heat, oil, sharp edges, or moving parts. Replace damaged cords  
immediately.  
Damaged cords may create a fire.  
A battery operated tool with integral batteries or a separate battery pack  
must be recharged only with the specified charger for the battery.  
WARNING:  
Some dust created by power sanding, sawing, grinding, drilling and  
A charger  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
that may be suitable for one type of battery may create a risk of fire when used with  
another battery.  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
Use battery operated tool only with specifically designated battery pack.  
any other batteries may create risk of fire.  
Use of  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
WARNING:  
Handling the power cord on corded products may expose you to  
lead, a chemical known to the State of California to cause cancer and birth  
Wash hands after handling.  
defects or other reproductive harm.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERSONAL SAFETY  
When battery pack is not in use, keep it away from other metal objects like:  
paper clips, coins, keys, nails, screws, or other small metal objects that can  
Stay alert, watch what you are doing, and use common sense when operat-  
ing a power tool. Do not use tool while tired or under the influence of drugs,  
make a connection from one terminal to another.  
nals together may cause sparks, burns or a fire.  
Shorting the battery termi-  
alcohol or medication.  
A moment of inattention while operating power tools  
may result in serious personal injury.  
Maintain tools with care. Keep cutting tools sharp and clean  
. Properly maintained  
tools with sharp cutting edge are less likely to bind and are easier to control.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Keep your hair, clothing, and gloves away from moving parts.  
jewelry or long hair can be caught in moving parts.  
Loose clothes,  
Check for misalignment or binding of moving parts, breakage of parts, and any  
other condition that may affect the tool’s operation. If damaged, have the tool  
serviced before using.  
Many accidents are caused by poorly maintained tools.  
Use only accessories that are recommended by the manufacturer for your  
model.  
Avoid accidental starting. Be sure switch is in the locked or OFF” position  
before inserting battery pack.  
Carrying power tools with your finger on the  
ON”  
switch or inserting battery pack into a tool with the power switch  
accidents.  
invites  
Accessories that may be suitable for one tool may create a risk of injury  
when used on another tool.  
Remove adjusting keys or wrenches before turning the tool ON.  
or a key that is left attached to a rotating part of the tool may result in person-  
al injury.  
A wrench  
SERVICE  
Tool service must be performed only by qualified repair personnel.  
maintenance by unqualified personnel may result in a risk of injury.  
Service or  
Do not overreach. Keep proper footing and balance at all times.  
Proper foot-  
ing and balance enable better control of the tool in unexpected situations.  
When servicing a tool, use only identical replacement parts. Follow instructions  
in the Maintenance section of this manual.  
Use of unauthorized parts or failure to  
Use safety equipment. Always wear eye protection.  
Dust mask, non-skid  
follow Maintenance Instructions may create a risk of shock or injury..  
safety shoes, hard hat, or hearing protection must be used for appropriate con-  
ditions..  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
TOOL USE AND CARE  
Hold tool by insulated gripping surfaces when perform-  
ing an operation where the cutting tool may contact hidden wiring.  
Contact  
with a “live” wire will also make exposed metal parts of the tool live” and shock  
the operator.  
Use clamps or other practical ways to secure and support the workpiece to a  
stable platform.  
Holding the work by hand or against your body is unstable and  
may lead to loss of control.  
SAFETY RULES FOR CORDLESS RECIPROCATING SAWS  
Do not force tool. Use the correct tool for your application.  
The correct tool  
will do the job better and safer at the rate for which it is designed.  
Do not use the tool if the power switch does not turn it ON” or OFF.  
cannot be controlled with the switch is dangerous and must be repaired.  
A tool that  
Always wear safety goggles or eye protection when using this tool. Use a dust  
mask or respirator for applications which generate dust.  
Disconnect battery pack from tool or place the switch in the locked or OFF” posi-  
tion before making any adjustments, changing accessories, or storing the tool.  
Such preventative safety measures reduce the risk of starting the tool accidentally.  
Secure the material being worked on. Never hold it in your hand or across  
your legs.  
Unstable support can cause loss of control and injury.  
Store idle tools out of reach of children and other untrained persons.  
are dangerous in the hands of untrained users.  
Tools  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMBOLS  
IMPORTANT:  
Some of the following symbols may be used on your tool. Please  
When using the Cordless Reciprocating Saw, always maintain a firm grip on  
the tool with both hands.  
not grasp the tool or place your hands too close to the blade. Keep your hands  
well away from the blade. Never reach underneath the tool while the blade is in  
motion. Do not use your legs or feet to stabilize the work piece.  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
Never put your hands or feet in the cutting area. Do  
SYMBOL  
NAME  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
V
A
Hz  
W
Kg  
Volts  
Amperes  
Hertz  
Position yourself to avoid being caught between the tool or side handle and  
walls or posts.  
Should the blade become bound or jammed in the work, it could  
result in loss of control and injury.  
Watt  
Do not run the Cordless Reciprocating Saw while carrying it at your side.  
ing blade could cause serious personal injury.  
A mov-  
Kilograms  
Alternating Current  
Direct Current  
Weight  
Type of Current  
Type of Current  
Disconnect battery pack from tool and place the switch in the locked or  
OFF” position before making any assembly, adjustments, changing acces-  
Alternating or Direct Current Type of Current  
sories, performing any inspection, maintenance or cleaning procedures.  
Such  
Earthing Terminal  
Class II Construction  
NAME  
Grounding Terminal  
Denotes Double Insulation  
EXPLANATION  
Time  
preventive safety measures reduce the risk of starting the tool accidentally  
which could cause serious personal injury.  
SYMBOL  
Do not use the Cordless Reciprocating Saw if it has been damaged, left out-  
doors in the rain, snow, wet or damp environments, or immersed in liquid.  
min  
s
Minutes  
Seconds  
Time  
Do not use dull or damaged blades.  
Diameter  
Size of Drill Bits,  
Keep cutting tools sharp and clean.  
Properly maintained cutting tools with  
Grinding Wheels, etc.  
sharp cutting edges are less likely to bind and are easier to control.  
No load speed  
No-load Rotational Speed  
.../min  
Revolutions per Minute  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
When restarting a saw in the workpiece, check that teeth are not engaged in  
the material.  
1,2,3, …  
Ring Selector Settings  
Speed, Torque or Position Settings  
Keep the handle of the Cordless Reciprocating Saw dry, clean, and free from  
oil and grease.  
Be extra careful when cutting in high or hard-to-reach locations.  
lookout for hidden wires and falling debris.  
Be on the  
Maintain labels and nameplates on the Cordless Reciprocating Saw.  
These  
carry important information. If unreadable or missing, contact Alltrade for a  
replacement.  
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL DESCRIPTION  
BATTERY  
7
6
9
8
5
Before using battery pack, please read carefully all instruc-  
tions and cautionary markings on battery pack, battery  
charger and product using battery.  
10  
®
Do not incinerate the battery pack even if it is severely dam-  
aged or is completely worn out.  
The battery pack can explode.  
Do not carry battery packs in aprons, pockets, or tool  
boxes, product kit boxes, drawers, etc. with loose metal objects.  
3
4
Battery  
2
pack terminals could be short circuited causing damage to the battery pack,  
severe burns or fire.  
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic  
1
material by the Environmental Protection Agency.  
Before disposing of dam-  
aged or worn out Ni-Cad battery packs, check with your State Environmental  
Protection Agency to find out about special restrictions on the disposal of these  
battery packs, take them to your local recycling center for proper disposal, or  
CONTROLS AND COMPONENTS:  
1. Battery Pack  
2. Release Buttons on Each Side  
3. Charger  
7. Lock-Off Button  
8. Rubber Grip  
9. Blade Clamp Knob  
1-800-822-8837  
call  
.
4. Indicator Lights  
5. Saw Shoe  
6. Trigger Switch  
ACCESSORIES:  
10. Saw Blades (2)  
The battery is not fully charged.  
3-5 hours charge time to be fully charged. Subsequent recharging needs 1 hour  
for the battery to be fully charged.  
Before first use, the battery pack requires  
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
COMPONENT  
BATTERY PACK  
CHARGER  
MODEL NUMBER  
690549  
690543  
690865  
Never over-discharge a battery by using the tool even after tool performance  
SAW BLADES  
has decreased.  
Do not attempt to discharge a tool’s battery by continuing to  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
Charge battery pack at ambient temperatures between 50° F – 104° F.  
Store tool and battery pack in locations where temperatures will not exceed  
120°F.  
This is important to prevent serious damage to the battery cells.  
The battery pack should always be recharged when the Cordless Drill begins to  
run slowly.  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small mettal objects that can  
make a connection from one terminal to another.  
together may cause sparks, burns, or fire.  
Shorting the battery terminals  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOVING / ATTACHING BATTERY PACK  
REMOVE BATTERY PACK:  
1. Press both release  
buttons on either  
side of the Cordless  
Reciprocating Saw to  
release the battery  
pack.  
CHARGING BATTERY PACK  
CHARGE BATTERY PACK:  
1. Plug the charger into  
the nearest 120 volt  
electrical outlet.  
BATTERY PACK  
2. Make sure the trigger  
on the Cordless  
LED  
LIGHT  
Reciprocating Saw  
2. Pull battery pack free of  
Cordless Reciprocating Saw.  
OFF”  
is in the  
RELEASE  
BUTTON  
position and remove  
the battery pack  
ATTACH BATTERY PACK:  
from the Cordless  
Reciprocating Saw.  
1. Align the raised portion of the battery  
pack with the groove in the battery com-  
partment of the Cordless Reciprocating Saw.  
BATTERY  
CHARGER  
3. Insert the battery pack  
2. Press the battery pack into place. Make sure the latches are securely fastened. Do  
not use the Cordless Reciprocating Saw if the battery pack is not seated properly.  
into the charger. Be sure that the battery pack is fully seated in the charger. Do  
not force.  
ON”  
4. The red indicator light should come  
indicating that the battery pack is in  
CHARGER  
ON”  
a “Fast Charge” mode. If the green indicator light comes  
is already fully charged.  
, then the battery  
Before using battery charger, please read carefully all  
instructions and cautionary markings on battery charger, battery pack and  
product using battery.  
5. After approximately one hour of charging, the red indicator light should go  
OFF” ON”  
and the green light should come  
indicating that the battery is fully  
charged and the charger is now in a Trickle Charge” mode.  
Use only the charger which accompanied your product or direct replacement as  
6. The battery can be left in a Trickle Charge” mode until ready to use.  
listed in this manual.  
Do not substitute any other charger. Use only Alltrade  
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES  
approved chargers with your product.  
When using your Cordless Reciprocating Saw continuously, the batteries in your  
battery pack will become hot. You should let a hot battery pack cool down for  
approximately 30 minutes before attempting to recharge. When the battery pack  
becomes discharged and is hot, the red light on the charger will flash. When the  
battery pack cools down, the red light will glow continuously to indicate fast  
charging mode, 1-hour charge time.  
Do not disassemble charger.  
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet  
or damp environments, or immersed in liquid.  
The battery pack and charger heat during charging.  
non-flammable surface away from flammable materials with at least four inches of  
clearance to allow proper air circulation around the charger and battery pack.  
Place the charger on a flat,  
This will occur when continuous use of your Cordless  
When the battery pack requires rechargging, a 1 hour charge allows the tool to  
operate at full power.  
A charging indicator light on the charger will illuminate to  
show that charging is taking place.  
Reciprocating Saw causes the battery pack to become hot.  
under normal circumstances.  
It does not occur  
11  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
OPERATING THE RECIPROCATING SAW  
Failure to remove the battery pack from the saw before  
removing the blade could result in accidental starting and serious personal  
injury.  
Be aware that this tool is always in an operating condition  
because it does not have to be plugged into an electrical outlet.  
Always turn  
OFF”  
the switch  
and remove the battery pack before changing blades.  
ATTACHING / REMOVING BLADE  
VARIABLE SPEED TRIGGER SWITCH  
BLADE CLAMP  
Never tape the trigger switch down to provide continuous  
high speed.  
injury.  
The tool may fail under such conditions causing fire or personal  
The lock-off button helps prevent accidental starting.  
This button can be pressed from either side.  
TRIGGER  
LOCK-ON  
BUTTON  
Remove the battery pack.  
TO ATTACH BLADE:  
Rotate the clamp knob clockwise and hold to retract the clamping jaws inside  
the clamp.  
• Insert the shank of the blade into the clamp until the hole in the shank engages  
the dent ball in the clamp.  
Release the clamp knob to tighten and secure the blade in place.  
Replace the battery pack.  
TO REMOVE BLADE:  
Rotate the clamp knob clockwise and hold to retract the clamping jaws inside  
the clamp.  
THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH:  
The speed of the Cordless Reciprocating Saw depends on the amount of  
pressure applied on the trigger. The further the trigger is pressed, the faster  
the tool will go.  
Pull the blade off the clamp.  
Replace the battery pack.  
ON/OFF”  
Press the lock-off button, then pull the  
trigger to turn the Cordless  
ON”  
OFF”  
,
Reciprocating Saw  
. To turn the Cordless Reciprocating Saw  
release the trigger switch.  
13  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL CUTTING  
PLUNGE CUTTING  
Never feed the blade into the work piece until the blade  
is at full speed. If the blade is not at full speed, the saw may kick back  
causing serious personal injury.  
Always hold the saw in front of you and away from your body. Keep your  
hands and feet well away from the work piece.  
Never feed the blade into the work piece until the blade is at full speed.  
If the blade is not at full speed, the saw may kick back causing serious  
personal injury.  
Use proper bladde for the particular cutting application.  
• Mark out the line to be cut so it is easily visible.  
Start inside the area to be cut out.  
Depress the lock-on button and press the trigger  
to start the saw.  
Put on eye protection.  
Set the shoe against the work piece.  
Clear the saw of any  
foreign material.  
When the blade reaches full speed, slowly feed the blade into the work piece.  
• Make sure the work piece is held  
securely in place. Hold smaller  
pieces in a vise or attach to the  
workbench with clamps.  
METAL CUTTING  
Never use gasoline or any flammable liquid as a  
lubricant. Sparking from the motor may cause it to ignite into flames.  
• Mark out the line to be cut so it is easily visible.  
Pull the trigger to start the saw.  
When cutting metals other then copper, brass or aluminum, always use a lubri-  
cant, such as cutting oil, to keep the blade cool. This will prolong the life of the  
blade as well as speeding up the cutting process.  
Set the shoe against the work piece.  
When the blade reaches full speed, slowly feed the blade into the work piece.  
• Make sure the work piece is held securely in place. Hold smaller pieces, such as  
pipe or conduit, in a vise or attach to the workbench with clamps.  
To eliminate vibration, always cut close to the clamping point.  
When cutting thin sheets of metal, place a piece of plywood on either side to control  
vibration and prevent tearing.  
15  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
OIL  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
If you must use an extension cord, be suree that the gauge is large enough to carry  
the amount of current necessary for your power tool.  
If not, your tool may experi-  
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge  
number, the heavier the cord (see table on next page).  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
18  
16  
14  
14  
-
MAINTENANCE AND CLEANING  
14  
12  
12  
12  
12  
12  
Always remove the battery pack before attempting  
cleaning or maintenance.  
-
SPECIFICATIONS  
SPECIFICATIONS  
19.2V  
This Cordless Reciprocating Saw is lubricated before  
it leaves the factory.  
This lubrication should last for the life of the tool. No  
further lubrication is required.  
Voltage  
Length of Stroke  
Switch  
22mm (7/8")  
Variable Speed with Brake  
Use only mild soap and a damp cloth to clean the tool.  
Never let any liquid get  
Charger Input  
Charging Time  
120V  
Approx. 1 hour  
60Hz  
inside the casing. Never immerse any part of the tool in a liquid. Always keep the  
ventilation openings clear.  
No Load Speed (RPM) 0-3200/min  
Always clean the battery pack using only a dry cloth. Do not use liquids.  
Always unplug the charger before cleaning it.  
Battery Type  
Ni-Cad  
PROTECTING THE ENVIRONMENT  
Regularly clean the ventilation slots in your tool and charger using only a soft  
brush or dry cloth.  
BATTERIES  
Alltrade batteries can be recharged many times. At the end of their useful life,  
recycle batteries with due care for our environment.  
Inspect all mounting screws regularly. Tighten any loose screws. Failure to keep  
the mounting screws tight could result in serious injuries.  
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center  
Never open the Cordless Reciprocating Saw case, battery pack or charger.  
attempt to repair the Cordless Reciprocating Saw, battery pack or charger yourself.  
Opening any of these parts will void your warranty.  
Do not  
1-800-822-8837  
or call  
. Collected batteries will be recycled or disposed of properly.  
17  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
and does not apply to products and/or components thereof designed, manufactured  
and/or assembled by others, for which Alltrade makes no warranties whatsoever.  
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON  
THE FACE HEREOF.  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
Warranty Performance  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
Jigsaws  
Circular Saws  
Angle Grinders  
Reciprocating Saws  
Routers  
Rotary Tools  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
3 YEAR LIMITED WARRANTY  
Express and Exclusive Limited Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ power tool and no one else all parts  
of the product (except those parts referred to below which are specifically exclud-  
ed from such warranty (see Exclusions)) to be free from defects in materials and  
workmanship for a period of three years from original date of purchase, except that  
such warranty with regard to the battery shall be for a period of two years from  
original date of purchase, unless the tool is used for commercial or rental  
purposes.  
SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE:  
The above  
warranty for this Kawasaki™ power tool, including the battery, shall be effective for  
only 90 days from the original date of purchase if this tool is used for any  
COMMERCIAL OR RENTAL PURPOSE.  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified or altered. This warranty does not apply to any  
other product and/or component thereof manufactured or distributed by Alltrade,  
19  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Exclusions  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
Warranty Disclaimers  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
21  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  

JBL Car Speaker JRX218S User Manual
Jensen Scandinavia Network Router AirLink 25150 11n User Manual
JVC Computer Drive LYT1155 001A User Manual
JVC DVD Player XV N450BUC User Manual
Kalorik Blender USK BL 24691 User Manual
Kenmore Water Dispenser 62534551 User Manual
Kenmore Water System 625384600 User Manual
Kingsford Charcoal Grill CBT1126W User Manual
KitchenAid Ice Maker KUIS155HLS2 User Manual
Kowa Microscope Magnifier TSN 773 User Manual