Kawai Musical Instrument CP67 User Manual

Digital Piano

CP67

Owner’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

SAVE THESE INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

WARNING

TO REDUCE THE RISK OF

CAUTION

FIRE

ELECTRIC

SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN

OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS : RISQUE DE CHOC ELECTRIQUE

- NE PAS OUVRIR.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the leterature accompanying the

product.

an equilateral triangle, is intended to alert the user

to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

Examples of Picture Symbols

denotes that care should be taken.

The example instructs the user to take care not to allow fingers to be trapped.

denotes a prohibited operation.

The example instructs that disassembly of the product is prohibited.

denotes an operation that should be carried out.

The example instructs the user to remove the power cord plug from the AC outlet.

Read all the instructions before using the product.

WARNING - When using electric products, basic precautions should always be followed,

including the following.

Indicates a potential hazard that could result in death

WARNING _{or serious injury if the product is handled incorrectly.}

The product should be connected to

an AC outlet of the specified

voltage.

ꢀ If you are going to use an AC power cord,

make sure that its has the correct plug shape

and conforms to the specified power voltage.

ꢀ Failure to do so may result in fire.

120V

230V

240V

Do not insert or disconnect the power

cord plug with wet hands.

Doing so may cause electric shock.

The chair must be used properly(it must be

used only when playing the product).

Doing so may cause the chair to fall over or your

fingers to be trapped, resulting in injury.

ꢀ Do not play with it or stand on it.

ꢀ Only one person is allowed to sit on it.

ꢀ Do not sit on it when opening the lid.

When using the headphones, do not

listen for long periods of

time at high volume levels.

Doing so may result in hearing problems.

– 3 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not lean against the keyboard.

Doing so may cause the product to fall over,

resulting in injury.

Do not disassemble, repair or modify

the product.

Doing somayresult in product breakdown,electric

shock or short-circuit.

ꢀ Pulling the AC power cord itself may damage

the cord, causing a fire, electric shock or

short-circuit.

WhendisconnectingtheACpowercord's

plug, always hold the plug

and pull it to remove it.

The product is not completely disconnected from the

power supply even when the power switch is turned

off. If the product will not be used for a long time,

unplug the AC power cord from the AC outlet.

ꢀ Failure to do so may cause fire in case of

lightning.

ꢀ Failure to do so may over-heat the product,

resulting in fire.

This product may be equipped with a polarized line plug (one blade

wider than the other). This is a safety feature.

If you are unable to insert the plug into the outlet, contact an

electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the plug.

Indicates a potential hazard that could result in injury

or damage to the product or other

CAUTION

Do not use the product in the following areas.

Using the product in such areas may result in

product breakdown.

ꢀ Areas, such as those near windows, where the product is

exposed to direct sunlight

ꢀ Extremely hot areas, such as near a heater

ꢀ Extremely cold areas, such as outside

ꢀ Extremely humid areas

ꢀ Areas where a large amount of sand or dust is present

ꢀ Areas where the product is exposed to excessive

vibrations

When you close the keyboard cover,

close it gently.

Closing it roughly may trap your fingers, resulting

in injury.

OFF

Before connecting cords, make sure

that the power to this product

and other devices is turned

OFF.

Failure to do so may cause breakdown of this

product and other devices.

Take care not to allow any foreign

matter to enter the product.

Entry of water, needles or hair pins may result

in breakdown or short-circuit.

The product shall not be exposed to dripping or

splashing. No objects filled with liquids, such as

vases, shall be placed on the product.

Please lift up the product when moving it.

Please note that the product is heavy and must

be carried by more than two persons.

Do not drag the product on the floor.

Take care not to drop the product.

Dropping the product may result in breakdown.

ꢀ Doing so may cause the product to generate

Donot placethe product near electrical

appliances such as TVs and

radios.

noise.

ꢀ If the product generates noise, move the

product sufficiently away from the electrical

appliance or connect it to another AC outlet.

When connecting the AC power cord

and other cords, take care

not to get them tangled.

Failure to do so may damage them, resulting in

fire, electric shock or short-circuit.

– 4 –

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ Doing so may result in discoloration or deformation

Do not wipe the product with benzene

or thinner.

of the product.

ꢀ When cleaning the product, put a soft cloth in

lukewarm water, squeeze it well,then wipe the

product.

ꢀ Doing so may cause the product to become

deformed or fall over, resulting in breakdown

or injury.

Do not stand on the product or exert

excessive force.

The product should be located so that its location or position does not interfere with its proper

ventilation.

This product should be used only with the stand that is provided by the manufacturer.

The product should be serviced by qualified service personnel when:

ꢀ The power supply cord or the plug has been damaged.

ꢀ Objects have fallen, or liquid has been spilled into the product.

ꢀ The product has been exposed to rain.

ꢀ The product does not appear to operate normally or exhibits a marked change in

performance.

ꢀ The product has been dropped, or the enclosure damaged.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the

power cord plug, and then contact the shop from which the product was purchased.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:

Pour viter les chocs lectriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu’au fond.

Instruction for AC power cord (U.K.)

Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

¥ Reorient or relocate the receiving antenna.

¥ Increase the separation between the equipment and receiver.

¥ Connect the equipment into an outlet on a different electrical circuit from the receiver.

¥ Consult the dealer or an experienced radio/TV technician for help.

Canadian Radio Interference Regulations

This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference

Regulations, C.R.C., c. 1374.

– 5 –

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLING THE STAND

Be sure that all parts are included before starting to assemble your unit.

PARTS PROVIDED

Side Panel (A)

Back Board (B)

2 pcs.

1 pc.

ø4 x 16

ø4 x 25

Adjuster Cord Clamp

M6 x 25

Pedal Board (C)

Screw (D) (M6 x 25)

Screw (E) (ø4 x 16)

Screw (F) (ø4 x 25)

Adjuster (G)

1 pc.

4 pcs.

6 pcs.

2 pcs.

1 pc.

1 set.

(F)

(D)

(E)

(G)

(H)

Cord Clamp (H)

Headphone Hook Set

1. Insert the Adjuster (G) on the Pedal Unit.

(A)

2. Untie the pedal cable on the bottom of the

Pedal Board (C).

(a)

(C)

(E)

(b)

3. Slide the metal bracket located at the end

of Pedal Board (C) on to screws (a) and (b)

of Side Panel (A). Install tighten screw (E)

then tighten screws (a) and (b). Repeat this

procedure on the other end of the Pedal Board,

then raise the completed stand assembly.

(A)

4. Fasten Side Panel (A) and Back Panel (B)

with two screws (F). Then fix Back Panel

(B) to Pedal Board (C) with four screws (D).

(F)

(C)

CAUTION:

To prevent personal injury, do not handle

the main unit from the ends.

(E)

(B)

5. The next step requires one person on each end of

the main unit. Grasp the unit with both hands, one

under the front, the other under the rear (remember,

not the end) and carefully center the main unit on

top of the stand so that the hook brackets located

on the bottom rear of the main unit are inside the

stand side panels (A) and approximately one-third

of the rear, top edge of the side panels are exposed.

(See the illustration to the right)

(D)

(A)

– 6 –

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Maintaining a firm grasp under the front of the main, unit

slide it toward the rear of the stand until the hook brackets engage

the brackets at the rear top of the side panels (A). This hook

arrangement is design to prevent the main unit from tilting

forward while the screws are installed. Keep one hand under

the front of the main unit, push down on the front to be certain

that hooks are properly engaged.

7. Fasten the main unit and the stand with four screws (D).

CAUTION:

Be sure to secure the main unit to the stand with the screws.

If you fail to do so, the unit could fall from the stand causing

damage or personal injury.

8. Insert the pedal connection cord that comes

from Pedal Board (C) into the piano’s pedal jack

and fasten with cord clamps.

(H)

9. Turn the adjuster (installed on the bottom of

the Pedal Unit) down until it makes firm contact

with the floor. If the floor is carpeted, place a

spiked furniture cup under the adjuster so that it

makes firm contact with the carpet backing.

Press any pedal with your foot. If the pedal rail

flexes, lower the adjuster until flexing is

minimized.

Bottom View

CAUTION:

Before moving your piano, turn the adjuster

up so that it clears the floor.

Attaching The Headphone Hook (Option)

Fix the headphone hook to the bottom of the piano with two screws packed in the same plastic bag.

– 7 –

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES

MASTER VOLUME SLIDER (A)

Move the volume slider to the right to increase the instrument’s volume. Move the slider to the left

to decrease the volume.

CONCERT MAGIC BUTTON (B)

This button is used to listen to a Concert Magic song.

DEMO BUTTON (C)

To listen to the demos, simply press this button and the demos will start.

STYLE BUTTONS (D)

These buttons are used to select different styles to accompany your playing.

1-2 PLAY BUTTON (E)

This button is used to automatically choose an appropriate sound and setup for the selected style.

METRONOME BUTTONS (F)

This button is used to start/stop the metronome.

ACC BUTTON (G)

This button is used to turn the auto accompaniment style function on/off.

SYNC BUTTON (H)

When active, the accompaniment style will start as soon as you play a note or chord on the keyboard.

START/STOP BUTTON (I)

This button is used to start and stop the accompaniment style.

INTRO/ENDING BUTTON (J)

This button is used to play an intro section that leads into the style. If you press this button while

the style is playing an ending section will be played before stopping.

FILL IN BUTTON (K)

This button is used to play a short fill in section that embellishes the style and leads to the next

section.

FRONT PANEL

G H

I J

B C

– 8 –

Download from Www.Somanuals.com. All Manuals Search And Download.

VALUE BUTTONS (L)

This buttons are used to adjust tempo, scroll through different selections, and adjust data values on

the LED display.

EFFECTS BUTTON (M)

This button turns the Effect on/off.

REVERB BUTTON (N)

This button turns the Reverb on/off.

BALANCE SLIDER (O)

This slider adjusts the volume balance of the two sounds used in Dual mode.

Also adjusts the volume of the accompaniment style.

SOUND BUTTONS (P)

These buttons are used to select the desired sound.

RECORDER BUTTONS (Q)

The PLAY/STOP button is used to play back and stop a recorded song.

The REC button is used to start recording a song.

You can record and play back up to three songs.

FUNCTION BUTTONS (R)

These buttons are used to select a touch type, transpose the keyboard, and control other features

(including MIDI functions).

L M

– 9 –

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER BUTTON (a)

This button turns the instrument on and off. Be sure to turn off the instrument when you are

finished playing.

SOFT PEDAL (b)

Depressing this pedal softens the sound and also reduces its volume.

SOSTENUTO PEDAL (c)

Depressing this pedal after playing the keyboard and before releasing the keys sustains the sound

of only the keys just played.

SUSTAIN PEDAL (d)

Depressing this pedal sustains the sound even after you remove your hands from the keyboard.

– 10 –

Download from Www.Somanuals.com. All Manuals Search And Download.

LINE OUT JACKS (e)

These jacks are used to connect an external amplifier and speakers, or a cassette recorder to the CP

piano.

LINE IN JACKS (f)

These jacks are used to connect stereo outputs from other audio equipment or electronic instruments

to the CP piano’s speakers.

MIDI JACKS (g)

These jacks are used to connect the CP piano with external MIDI devices.

PEDAL JACK (h)

Connect the pedal cord from the pedal board to this jack.

HEADPHONES JACKS (i)

These jacks are used to connect up to two headphones to the CP67.

BOTTOM

– 11 –

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED

1. BASIC OPERATIONS

(1) Turn on the power.

You will find the POWER SWITCH at the right end of the front panel.

Press this button to turn on the power. Pressing it again will turn off the

power.

(2) Adjust the volume.

Play a note on the keyboard and adjust the volume (Moving the slider to

the right raises the volume while moving to the left lowers it.)

(3) Select a sound.

Press the SOUND SELECT button under the name of the instrument

you would like to listen to. When the button is pressed, the LED indicator

will be turned on to indicate that this sound is selected. The SOUND

SELECT buttons are assigned with three preset sounds to select. To select

the other sounds, press the button repeatedly. When a SOUND

SELECT button is pressed, the variation number is briefly shown in the

display. Pressing the same SOUND SELECT button again will select the

next variation sound assigned to the SOUND SELECT button.

You can also select any preset sounds by using the VALUE buttons while

the variation number is shown on the LED display.

(4) Play.

Experiment by playing the different sounds.

(5) Dual

Another feature of the CP piano is the ability to layer two preset sounds

together to create a more complex sound. For example, piano layered

with strings, e. piano with brass sound, and so on.

To layer two sounds, select the first sound and then, while holding down

that SOUND SELECT button, select the second sound by pressing

another SOUND SELECT button. The LED indicators for each will be

turned on to indicate the two sounds you have chosen. The display briefly

shows the combination of the selected sound variation numbers.

You can adjust the volume balance between the two sounds. Use the

Balance slider to adjust the balance. Move the slider to the right to

increase the volume of the rightmost preset sound and decrease the volume

of the leftmost preset sound. The balance changes in the opposite way

when the slider is moved to the left.

– 12 –

Download from Www.Somanuals.com. All Manuals Search And Download.

ABOUT POLYPHONY

The CP piano is capable of playing up to 96 notes simultaneously (96-note

polyphony). When playing in dual mode or when playing the stereo piano

sound, the polyphony will be reduced by half since the piano has to produce

two sounds for each note.

(6) Reverb

-REVERB adds reverberation to the sound simulating the acoustic

environment of a recital room or concert hall.

There are six types of reverb in the CP67. They are Small Room, Medium

Room, Large Room, Medium Hall, Large Hall and Plate.

To add reverb to the sound, press the REVERB button. The LED

indicator will be turned on. If you hold down the REVERB button for

few seconds, the current setting will be shown in the display.

To change the reverb type, use the VALUE buttons while holding down

the REVERB button.

The reverb is “ON” when the LED of the REVERB button is lit.

Pressing the REVERB button once again turns the reverb “OFF”.

When the power is turned on, the reverb function is automatically activated.

Large Hall

Plate

Medium Hall

Large Room

Small Room Medium Room

(7) Effects

-Adding an effect to the sound enhances tonal quality and improves

acoustical realism.

There are twelve types of effect in the CP67. They are Chorus 1, Chorus

2, Chorus 3, Chorus 4, FB Chorus, Tremolo, Rotary 1, Rotary 2, Flanger,

Delay 1, Delay 2 and Delay 3.

To add an effect to the sound, press the EFFECTS button. The LED

indicator will be turned on and the LED display will show you which

effect is currently selected.

To change the effect type, use the VALUE buttons while holding down

the EFFECTS button.

Pressing the EFFECTS button once again turns the effect “OFF”.

FB Chorus

Chorus 4

Tremolo

Rotary 2

Flanger

Delay 3

– 13 –

Download from Www.Somanuals.com. All Manuals Search And Download.

2. STYLE

(1) Select a style.

Press one of the STYLE buttons. The LED of the selected STYLE button

will light to indicate which style is currently in being used. Pressing the

active STYLE button again will switch to the alternative style of the STYLE

button.

(2) Start the style.

Pressing the START/STOP button will start the style. Pressing it again

will stop the style.

Pressing the INTRO/ENDING button will start the style with an intro

section. Pressing it again will stop the style with an ending section.

Pressing the FILL IN button while the style is running will play a short fill

in section which embellishes the style and leads to the next variation section.

When the SYNC button is pressed, the style will not start until you play a

note or chord on the keyboard.

(3) Adjust the Tempo.

You can adjust the tempo by using the VALUE buttons. The tempo is

shown in the LED display when the style is running . If the tempo is not

shown in the LED display, touching the VALUE buttons will activate the

LED display to show the tempo.

(4) Turn on the accompaniment.

When the ACC button is pressed, the CP piano will play a complete

accompaniment style. In addition, the keyboard will be split into two

sections-upper and lower keyboard. When the ACC button is turned OFF

only the rhythm accompaniment will be played. With the ACC button

ON, when you play a chord in the lower keyboard the accompaniment

style will automatically follow the chords you play. The accompaniment

system is capable of following single finger as well as more complex chord

voicings. If you want to change the volume for the style, use the Balance

slider while holding down the ACC button. The LED display shows

you the volume level for the style from 0 (soft) to 127 (loud). If you want

to change the split point for the lower keyboard, press a key on the

keyboard while holding down theACC button. The pressed key will be

the lowest note for the upper keyboard.

– 14 –

Download from Www.Somanuals.com. All Manuals Search And Download.

(5) 1-2 Play mode

When the 1-2 PLAY button is activated, the CP piano will automatically

choose an appropriate sound setup and tempo for the selected style.

You can adjust the volume of the accompaniment style by using Balance

slider.

3. TRANSPOSE

The transpose function lets you raise or lower the piano’s key in half steps.

This is especially useful when you have learned a song in one key and

have to play it in another key. The transpose feature allows you to play the

song in the original key, but hear it in another key.

To transpose the keyboard, press and hold the TRANSPOSE button.

The LED display shows you the current value. The value is always set to

“0” when the power is turned on.

Value: 0

Value: -5

While still holding the TRANSPOSE button, use the VALUE buttons

or the keyboard from C2 to C4 to specify the transposition amount.

The LED display shows you a number telling you how many half steps up

or down you have transposed the piano. -5, for example, represents a

transposition that is 5 half steps lower. “0” indicates no transposition.

The piano can be transposed up to 12 half steps higher or 12 half steps

lower.

Pressing TRANSPOSE button again turns the transpose function off.

The TRANSPOSE function remembers the current setting as long as the

power is on.

4. TOUCH RESPONSE

When playing a piano, the volume of the sound produced increases in

direct relation to how hard a key is struck. The CPpiano offers the realistic

feel of an acoustic piano for practicing music. The touch response function

simulates the standard touch of an acoustic piano when the LED of the

TOUCH button is off. When the LED of the TOUCH button is lit, you can

select other touch types as follows.

Light 1 / 2 (Lt):

For those still developing finger strength, such as a

child, a louder sound is produced even when the piano

is played with a soft touch. Light 2 is lighter than

Light 1.

LIGHT 1

– 15 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Heavy 1 / 2 (HE):

Perfect for those with strong fingers or for practicing

with a hard touch. Heavy 2 is heavier than Heavy 1.

HEAVY 2

OFF

Off (OFF):

For tone colors like organ or harpsichord, and for

playing some contemporary music with the piano

sound, a constant loud sound is produced regardless

of your force on the keys.

To change the touch type, press and hold the TOUCH button. The

LED display shows you the current touch type. While holding the TOUCH

button, use the VALUE buttons to change the touch type.

Press the TOUCH button again to get back to the standard touch

setting.

Once the power is turned off, the touch type will be reset to the standard

setting.

5. DEMONSTRATION SONG

The CP piano has 3 built in demonstration songs for your listening

enjoyment.

Press the DEMO button and the first demo song will start. The LED

display shows the demo song number. When the first demo song is finished,

the CP piano will play all the other demo songs one at a time in order.

If you would like to listen to a particular demo song, use the VALUE

buttons to select your desired song.

To stop the demo, press the DEMO button again at any time.

6.METRONOME

Rhythm is one of the most important elements when learning music. It is

important to practice playing the piano in the right tempo and with a steady

rhythm. The CP piano’s metronome is a tool that helps you to achieve this

by providing a steady beat for you play along with.

Starting the Metronome

Press the TEMPO button. You will see the LED display turns on and

hear the metronome begin counting with a steady beat. The display shows

the tempo in beats per minute

To change the tempo, use the VALUE buttons to increase or decrease

the tempo within the range of 30-250 beats per minute. (60-500 BPM

with 6/8).

To stop the metronome, press the TEMPO button again.

– 16 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the time signature

You probably noticed that there are two types of clicks and the louder one

comes every fourth beat. The metronome is capable of giving you a down

beat to indicate the beginning of the measure. You are now hearing a 4-

beat or 4/4 time signature.

You can select different a time signature if you want to out of the seven

available with the CP piano—1/4, 2/4, 3/4, 4/4, 5/4, and 6/8.

To change the time signature, use the BEAT button.

Press the BEAT button. You will see the LED indicator turn on and

hear the metronome begin counting. The display shows the time signature.

Use the VALUE buttons to select your desired time signature.

You will see the time signature currently selected in the display.

To stop the metronome, press the BEAT button again.

You can use either the TEMPO or BEAT button to turn the metronome on

and off. Choose the appropriate button depending on whether you’re

adjusting the tempo or changing the time signature.

Adjusting the Metronome Volume

The volume level of metronome can be adjusted to any level you like

independent of the main volume.

Press the TEMPO and BEAT buttons simultaneously. The display

shows the volume level of the metronome in numbers from 1 (soft) to 10

(loud). The factory preset is 5.

Use the VALUE buttons to change value.

– 17 –

Download from Www.Somanuals.com. All Manuals Search And Download.

DIGITAL RECORDING FUNCTIONS

1. EASY RECORDING

Press the REC button. The CP piano is now ready to record. To cancel

the recording, press the REC button again.

Begin playing some music on the piano. The CPpiano will automatically

start recording with the first note you play. You can also start recording by

pressing the PLAY/STOP button.

Press the PLAY/STOP button when you have finished recording.

NOTE:

Starting another recording will delete the song you previously recorded.

2. PLAYING BACK A SONG

Press the PLAY/STOP button. The song will be played back using the

same tone (sound) with which it was recorded.

Press the PLAY/STOP button once again to stop the playback. If you

do not press the PLAY/STOPbutton, playback will automatically stop when

the song is finished.

You can adjust the tempo of playback by using the VALUE buttons.

3. ADVANCED RECORDING/PLAYBACK FUNCTIONS

RECORDING MORE SONGS

The CP piano can record and store a maximum of 3 songs. Please follow

the steps below to save your songs:

While holding down the REC button, press the Song 2 button.

The LED will blink to show the current song number (while the REC button

is held down). The piano is now ready to record (Song 2). To cancel

without recording, press the REC button again.

Play the piano. Playing the piano will automatically start the recording.

You can also start recording by pressing the PLAY/STOP button.

– 18 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the PLAY/STOP button after you have finished recording.

Holding down the PLAY/STOP button, press the SONG 2 button.

Releasing both buttons will play Song No.2. Playback will automatically

stop when the song is finished. You can adjust the tempo of playback

by using the VALUE buttons.

RECORDING/PLAYING BACK THE LEFT AND RIGHT HAND PARTS

SEPARATELY

The CP piano can record the parts played by the left or right hand and play

back these parts separately or simultaneously. This function can be enjoyed

in different ways. For example, you can practice the right-hand part of the

song while playing back the recorded left-hand part, or record the melody

part of the song while playing back the previously recorded accompaniment.

While holding down the REC button, press the SONG 3 button to

select Song No.3. Track 1 of Song No.3 will be selected and the CP piano

is now ready to record. To cancel without recording, press the REC

button again.

Play the piano with your left hand. Playing the piano will automatically

start the recording. You can also start recording by pressing the PLAY/

STOP button.

Press the PLAY/STOP button after you have finished recording.

Now, to play back the left-hand part, press the PLAY/STOP button.

The left-hand part you have recorded (Track 1 of Song No.3) will be played

back. You can practice the right-hand part along with the recorded part.

You can adjust the tempo of playback by using the VALUE buttons.

Let’s record the right-hand part while listening to the left-hand part.

While holding down the REC button, press the TRACK 2 button. The

Track 1 LED will light and the Track 2 LED will flash to indicate that the

piano is now ready to record Track 2. To cancel without recording, press

the REC switch again.

Now play the right-hand part. Pressing any key will start play back of

the recorded left-hand part (Track 1) while you play (and record) the

right-hand part. You can also start recording by pressing the PLAY/

STOPbutton. After pressing the PLAY/STOPbutton the left-hand part

will begin playing back, you can then begin playing (recording) the

right hand part from any point in the song you like.

Press the PLAY/STOP button after you have finished recording.

– 19 –

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE:

If you play with the style (rhythm and accompaniment), it is also recorded

but only on track 1.

PLAYING BACK THE LEFT- AND RIGHT-HAND PARTS SEPARATELY

After you have recorded the left- and right-hand parts (Track 1 and Track

2) separately, it is possible to play back the two parts by themselves or

together. The following example shows how to play back only Track 2.

Select and press one of the SONG buttons (Song 1, Song 2 or Song 3)

while pressing the PLAY/STOP button.

While holding down the PLAY/STOP button, press the TRACK 1

button.

The TRACK 1 button LED will be turned “off”. If you need to turn Track

1 back “on”, press the TRACK 1 button once again.

Releasing both buttons will play back only Track 2. You can adjust

the tempo of playback by using the VALUE buttons.

4. DELETING A SONG/TRACK

This function allows you to delete songs that were not recorded correctly

or songs that you do not want to listen to any more.

Simultaneously hold down the PLAY/STOP and REC buttons.

The LEDs will light to show you where songs have been recorded.

While holding down both the PLAY/STOP and REC buttons, press

the SONG button that corresponds to the song you want to delete.

While still holding down both the PLAY/STOPand REC buttons, press

the TRACK button that you want to delete and turn the LED of that

TRACK button off.

To delete more than one song, repeat the above procedure.

NOTE:

– The total memory capacity of the recorder is approximately 7,000 notes.

When the recorder reaches its maximum capacity, the CP piano will stop

recording at this point. Any data recorded before the interruption will be

retained.

– To delete all recorded songs (reset), first turn the power off and then

turn it back on again while holding down both the PLAY/STOP and

REC buttons.

– 20 –

Download from Www.Somanuals.com. All Manuals Search And Download.

CONCERT MAGIC

The great German composer Johann Sebastian Bach once said, “Playing

the keyboard is simple. Just strike right keys at the right time.” Many

people wish it were that simple. The reality is very different of course.

However, there is a way to make playing the keyboard very simple. You

don’t even have to strike right keys thanks to Concert Magic.

With Concert Magic, absolutely anyone can sit at the CP piano and make

real music… even if you’ve never taken a piano lesson in your life.

To enjoy performing by yourself, you have only to select your favorite

piece from 40 preprogrammed songs and tap any of the 88 keys with a

steady rhythm and tempo. Concert Magic will provide the correct melody

and accompaniment notes, regardless of which keys you press. Anybody,

young or old, can enjoy Concert Magic from the moment they sit down at

the CP piano.

Now let’s see how Concert Magic works.

1.SELECTING A SONG

The 40 Concert Magic songs are assigned to each of the 40 white keys,

classified in six groups by song category such as Children’s Songs,

American Classics, Christmas Songs.

All of the song titles are listed on page 33.

To select a song, press the key to which your desired song is assigned

while holding down the CONCERT MAGIC button.

1 2 3

4 5 6 7

2.LISTENING TO THE SONG

If you have selected a song you are familiar with, you may want to play by

yourself right away. However you may want to listen to the song first

before playing it.

To listen, press the PLAY/STOPbutton. The CP piano will start playing

back the selected song. When the demo song is finished, press the START/

STOP button again to stop. Otherwise the CP piano will play all the other

Concert Magic songs one at a time in order.

If you want to listen to a different song, repeat the same procedure to select

a song.

– 21 –

Download from Www.Somanuals.com. All Manuals Search And Download.

3.PERFORMING A SONG

Now you’re ready to play yourself.

Tap out the rhythm of the selected song on any one of the 88 black or

white keys on your piano keyboard. As you tap harder, the notes will

get louder; as you tap softer, the notes will get quieter. As you tap faster,

the notes speed up; as you tap slower, they will slow down correspondingly,

just like regular piano playing.

Isn’t it fun? You can sound like you’ve been playing for years just by

pressing one key with one finger.

Concert Magic is a perfect method for small children to learn music,

especially to develop a sense of rhythm. For older people who may think

it is too late to learn the keyboard, Concert Magic is a good first step for

them to begin with. With Concert Magic, your CP piano can be enjoyed

by anyone in the family, even those who have never touched a musical

instrument in their life.

4.CONCERT MAGIC SONG ARRANGEMENT TYPES

After playing for a while with Concert Magic you may think that it’s too

easy and there is very little to learn.

While it is true that some of the songs are very easy to play, even for

beginners, there are also some which will challenge you and require some

practice to play beautifully. Each of the 40 Concert Magic songs falls into

one of three different categories depending on the skill level required to

perform them.

Easy Beat

These are the easiest songs to play. To perform them, simply tap out a

constant steady beat on any key on your piano keyboard.

Look at the following example, “Für Elise”. Press the key with a steady

sixteenth note rhythm.

Key on

x x x x x x

x x x

x x

#œ #œ

n^xœ ^x

≈

#œ

& 8

? 3

#œ

∑

≈ ‰

– 22 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Melody Play

These songs are also quite easy to play, especially if they are familiar to

you. To perform them, tap out the rhythm of the melody on any one of the

keys on your piano keyboard. Singing along as you tap the rhythm can be

helpful.

Key on

œ œ

œ œ ˙

œ ˙

Play “Twinkle, Twinkle, Little Star” for example. Follow the melody’s

rhythm as shown.

When performing fast songs with Concert Magic, it is sometimes easier to

tap two different keys with two fingers alternating. This allows you to

play twice as fast as you can using only one finger on one key.

Skillful

These songs range in difficulty from moderately difficult to difficult. To

perform them, tap out the rhythm of both the melody and the

accompaniment notes on any of the keys on your piano keyboard, like

“Waltz of The Flowers” shown below.

Key on

œ ˙.

˙.

œ œ œ

œ œ

œ œ œ

bœ œ œ

œ œ œ

œ œ

? # 3 œ œ œ

It may take some practice to get them just right. A good way to learn these

songs is to listen to them first, and then try to tap out the rhythms that you

hear.

In the song list on page 33, the arrangement type is marked next to each

song title as “EB” for Easy Beat, “MP” for Melody Play and “SK” for

Skillful.

– 23 –

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Concert Magic Song Demo

There are three ways to listen to the Concert Magic songs in the

DEMO mode.

All Play

Press the CONCERT MAGIC button and then press the PLAY/

STOP button without selecting a song. The CP piano will play

back all of the Concert Magic songs in order.

Random Play

Press the CONCERT MAGIC button and then press the DEMO

button. The CP piano will play back all of the Concert Magic songs

in random order.

Category Play

Press the piano key to which the desired song is assigned while

holding down the DEMO buttons. The CP piano will play back

the selected song and, then play the rest of the songs in the same

song category one after another.

To stop the demo, press the PLAY/STOP button.

– 24 –

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNCTION MODE

The Function Mode gives you access to many other useful features on

your CP piano. To enter the Function Mode, press the TOUCH and

TRANSPOSE buttons at the same time. The LEDs for both buttons

will flash. Press one of the following sound buttons to choose a function

to edit. To exit the Function Mode, press either the TOUCH button or

TRANSPOSE button.

The following functions can be selected in the Function Mode:

Tuning (PIANO button)

Temperament (E. PIANO button)

MIDI Channel (HARPSI & MALLET button)

Transmit Program Change On/Off (ORGAN button)

Local Control On/Off (STRING button)

Channel Mute (VOCAL & SYNTH button)

Program Change Number (BRASS & W.WIND button)

1. TUNING

This function allows you to adjust the piano’s pitch. You may need to

adjust the tuning when you play with other instruments or recordings.

Press the PIANO button while in the function mode. The LED display

shows you a number that represents the pitch for “A” in Hz (Hertz).

The range of adjustment is from 427.0 to 453.0 Hz (displayed as 27.0–

53.0). The factory preset value is set to the modern standardA= 440.0

Hz (displayed as 40.0).

Pitch:

440.0 Hz

Use the VALUE buttons to raise or lower the pitch.

2. TEMPERAMENT

The CP piano offers not only equal temperament (the modern standard)

but also immediate access to temperaments popular during the Renaissance

and Baroque periods. It should be interesting and educational to try some

of the different temperaments, although the equal temperament is dominant

today.

Press the E. PIANO button while in the function mode. The LED display

shows you an abbreviation for the type of temperament currently selected.

Use the VALUE buttons to select your desired temperament.

Temperament

(Equal)

After you have selected the desired temperament, you must select a key

signature for the temperament. Limitless modulation of the key became

available only after the invention of Equal temperament. When we use a

temperament other than Equal temperament, we must carefully choose the

key signature to play in.

– 25 –

Download from Www.Somanuals.com. All Manuals Search And Download.

To select the key signature of the temperament, simply press one of

the 88 piano keys. The LED display shows you the note name for the key

you pressed and it will be chosen as the key of the temperament. For

example, if the song you are going to play is written in D major, press any

“D” key to set the temperament key.

Key in D

Key in A#

BRIEF EXPLANATION OF TEMPERAMENTS

EQUAL TEMPERAMENT (PIANO ONLY)

Equal(P.only)

This is the default temperament. If a piano sound is selected the tuning is

stretched like an acoustic piano (EQUALTEMPERAMENT). If any other

type of sound is selected the tuning will be EQUAL(FLAT). An explantion

of EQUAL TEMPERAMENT and EQUALTEMPERAMENT (FLAT) is

provided later in this section.

NOTE:

If a piano sound is used in a layer with any other sound then both sounds

will use the EQUAL TEMPERAMENT (Stretched) tuning.

MERSENNE PURE TEMPERAMENT(Major)

MERSENNE PURE TEMPERAMENT(Minor)

Pure(Major)

Pure(minor)

This temperament, which eliminates dissonances for thirds and fifths is

still popular for choral music because of its perfect harmony.

You need to be aware what key you are playing in with this temperament.

Any key modulation will result in dissonances. When you play music in a

particular key, you need to match the key of the temperament as well.

When playing in a major key select Pure (Major) and when playing in a

minor key select Pure (minor).

PYTHAGOREAN TEMPERAMENT

This temperament, which uses mathematical ratios to eliminate dissonance

for fifths, is very limited for use with chords, but it produces very

characteristic melodic lines.

Pythagorean

Meantone

MEANTONE TEMPERAMENT

This temperament, which uses a mean between a major and minor whole

tone to eliminate dissonance for thirds, was devised to eliminate the lack

of consonances experienced with certain fifths for the Mersenne pure

temperament. It produces chords that are more beautiful than those with

the equal temperament.

– 26 –

Download from Www.Somanuals.com. All Manuals Search And Download.

WERCKMEISTER III TEMPERAMENT,

KIRNBERGER III TEMPERAMENT

Werckmeister

Kirnberger

These two temperaments are placed in between Meantone and Pythagorean.

For music with few accidentals, this temperament produces the beautiful

chords of the mean tone, but as accidentals increase, the temperament

produces the characteristic melodies of the Pythagorean temperament. It

is used primarily for classical music written in the Baroque era to revive

the original characteristics.

EQUAL TEMPERAMENT(FLAT)

This is “unstretched” equal temperament that divides the scale into twelve

equal semitones. This produces the same chordal intervals in all twelve

keys, and has the advantage of limitless modulation of the key. However

the tonality of each key becomes less characteristic and no chord is in pure

consonance.

Equal(Flat)

EQUAL TEMPERAMENT

This is the most popular piano temperament. The hearing ability of a

human is uneven and is not as accurate with high frequency and low

frequency as it is with the middle range. This temperament’s tuning is

stretched to compensate for this so the sound will be heard naturally to the

ears. This “Stretched” equal temperament is a practical variation of the

“unstretched” equal temperament which was invented on a mathematical

basis.

Equal

3. MIDI CHANNEL

This function determines on which channel the CP piano will exchange

MIDI data with an external MIDI device or personal computer.

Press the HARPSI & MALLET button while in the function mode.

The LED display shows you the currently selected channel number. The

default channel is 1.

Use the VALUE buttons to select your desired MIDI channel, 1-16.

When the power is first turned on, the CP piano always selects channel 1.

Channel 15

– 27 –

Download from Www.Somanuals.com. All Manuals Search And Download.

4. TRANSMIT PROGRAM CHANGE ON/OFF

This function determines whether or not the CP piano will transmit program

change information when pressing the SOUND SELECT buttons. When

this is turned on, pressing the SOUND SELECT buttons will send the

program change numbers.

Press the ORGAN button while in the function mode.

The display alternatively shows “PGM” (= Program) and on/off status.

The default is on.

Use the VALUE buttons to toggle on and off.

5. LOCAL CONTROL ON/OFF

This function determines whether the CP piano’s sound will be played

from the piano’s keyboard (“On”) or only from an external MIDI instrument

(“Off”).

Even with local control “Off” the piano’s keyboard will still transmit to an

external MIDI instrument or personal computer.

Press the STRING button while in the function mode. The LED display

shows you “On” or “Off”. The initial value is “On”.

Local Control

Use the VALUE buttons to turn local control “On” and “Off”

Local Control

OFF

6. CHANNEL MUTE

This function determines which MIDI channels are activated to receive

MIDI information. You can activate or deactivate each of the 16 channels

individually.

Press the VOCAL & SYNTH button while in the function mode. The

display alternatively shows “P1” (=Play 1) and “On”. This means channel

1 is activated.

Use the VALUE buttons to toggle on and off.

To turn on and off the other channels, use the 16 leftmost white keys to

select a desired channel. The display will show “P 1” through “P 16”.

Then use the VALUE buttons to turn them on and off.

– 28 –

Download from Www.Somanuals.com. All Manuals Search And Download.

7. SENDING PROGRAM CHANGE NUMBERS

This function allows the CP piano to transmit program change numbers

beyond the 24 pre-defined numbers transmitted by the sound select buttons.

Using this function, you can send any number from 1 to 128.

Press the BRASS & W. WIND button while in the function mode.

The display alternatively shows “PG#” (=Program#) and a program change

number. Use the VALUE buttons to change the number.

To send the program change number, press both VALUE buttons

simultaneously.

– 29 –

Download from Www.Somanuals.com. All Manuals Search And Download.

MIDI

The term MIDI is an acronym for Musical Instrument Digital Interface, an

international standard for connecting synthesizers, sequencers (digital

recorders) and other electronic instruments so that they can exchange

performance data.

The CP67 is equipped with two MIDI jacks for exchanging data: MIDI IN

and MIDI OUT. Each uses a special cable with a DIN connector.

MIDI IN : For receiving note, program change and other data.

MIDI OUT : For sending note, program change and other data.

MIDI EXAMPLES

(1) Connection to another MIDI compatible keyboard or sound

generator module

When connected as shown in the illustration, data on how the digital piano

is played (which keys are struck) can be sent to another MIDI instrument.

Plus, the sound from the CP67 can be layered over the sound of the other

instrument.

CP67

MIDI IN

MIDI

OUT

Digital Synthesizer

MIDI cable

CP67's Piano sound

Synthesizer's String sound

– 30 –

Download from Www.Somanuals.com. All Manuals Search And Download.

(2) Connection to an external sequencer

When connected as shown in the illustration, you can record songs played

on the CP67 with a sequencer, and use the CP67’s tones controlled by the

CP67’s MULTI-TIMBRAL MODE function (which is ON at all times) to

create a multi-layer MIDI recording.

CP67

MIDI

MIDI OUT

OUT

MIDI IN

MIDI cable

MIDI Sequencer

– 31 –

Download from Www.Somanuals.com. All Manuals Search And Download.

LIST OF PRESET SOUND

PIANO

E. PIANO

1. Concert Grand

2. Studio Grand

3. Honky Tonk Piano

HARPSI & MALLET

1. Vibes

1. Classic E. Piano

2. Modern E. Piano

3. 60's E. Piano

ORGAN

1. Jazz Organ

2. Harpsichord

3. Music Box

STRING

1. String Ensemble

2. Slow Strings

3. Violin

BRASS & W.WIND

1. Solo Trumpet

2. Flute

2. Drawbar Organ

3. Church Organ

VOCAL & SYNTH

1. Choir Ahs

2. New Age Pad

3. Atmosphere

SPECIALTY

1. Nylon Acoustic Guitar

2. Accordion

3. Clarinet

3. Banjo

STYLE LIST

BIG BAND

SWING

50'S 1

50'S 2

60'S 1

60'S 2

LATIN

POP

BALLAD

MARCH

COUNTRY 1

COUNTRY 2

WALTZ 1

WALTZ 2

C. PIANO (CLASSIC PIANO)

BROADWAY

– 32 –

Download from Www.Somanuals.com. All Manuals Search And Download.

CONCERT MAGIC SONG LIST