1
2
3
4
5
6
7
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
3
Thank you for purchasing a KAWAI CN32 digital piano!
The CN32 digital piano is a revolutionary new instrument that combines the latest digital technology with traditional piano
craftsmanship inherited from KAWAI’s many years of experience in building fine acoustic pianos. The authentic tone has
been created through the stereo sampling of concert grand pianos, and is reproduced using KAWAI’s unique Harmonic
Imaging™ sound technology, while the Advanced Hammer Action IV-F keyboard action provides the touch response and
full dynamic range required for a superb performance of piano, harpsichord, organ, and other instruments.
The CN32 digital piano is also equipped with additional reverb and digital effects processors, delivering a deeper, richer
sound, while industry standard MIDI (Musical Instrument Digital Interface) jacks and a USB interface are also provided,
allowing the playback of other electronic instruments and connection with personal computers, while the Lesson function
helps performers to practice the piano with a collection of etudes from Czerny and Burgmüller, or songs from Alfred’s Basic
Piano Library and Alfred’s Premier Piano Course lesson books (USA, Canada, Australia and UK only).
This owner’s manual contains useful information regarding the varied capabilities of the CN32 digital piano. Please read all
sections carefully and keep this manual handy for future reference.
Table of Contents
Important Safety Instructions ..............4
5. RECORDER ......................................34
1) RECORDING (REC BUTTON) ...................................... 34
¡
1. PART NAMES AND FUNCTIONS .......8
RECORDING A SECOND PART .............................. 35
‘
FRONT PANEL ............................................................ 8
PEDALS....................................................................... 8
HEADPHONES............................................................ 9
‘
‘
‘
2) PLAYING BACK A SONG............................................... 37
PLAYING BACK RECORDED PARTS SEPARATELY ... 37
‘
3) ERASING A SONG ....................................................... 38
2. PLAYING THE PIANO ......................10
6. FUNCTION BUTTONS ......................39
1) BASIC OPERATIONS..................................................... 10
ENTERING A FUNCTION MODE.............................. 39
EXITING A FUNCTION MODE.................................. 39
‘
SETTING UP THE PIANO ........................................ 10
‘
‘
2) DEMO SONGS .............................................................. 11
3) SELECTING A SOUND ................................................. 12
4) DUAL MODE .................................................................. 13
5) SPLIT MODE.................................................................. 15
6) FOUR HANDS MODE.................................................... 17
7) REVERB AND EFFECTS............................................... 19
1) LOWER OCTAVE SHIFT................................................ 40
2) LOWER PEDAL ON/OFF ............................................... 41
3) DAMPER HOLD ON/OFF............................................... 42
4) DAMPER EFFECT ......................................................... 43
5) STRING RESONANCE .................................................. 44
6) FOUR HANDS ON/OFF ................................................. 45
7) TUNING.......................................................................... 46
8) TEMPERAMENT............................................................ 47
ADDING REVERB ..................................................... 19
APPLYING EFFECTS ................................................ 20
‘
‘
8)TOUCH CURVE .............................................................. 21
9) TRANSPOSE.................................................................. 22
10) METRONOME.............................................................. 23
KEY SIGNATURE OF TEMPERAMENT ................... 48
MIDI OVERVIEW ....................................................... 49
CN32 MIDI functions.................................................. 49
‘
‘
‘
STARTING THE METRONOME................................. 23
CHANGING THE METRONOME TIME SIGNATURE ... 23
ADJUSTING THE METRONOME VOLUME.............. 24
‘
‘
‘
9) MIDI CHANNEL.............................................................. 50
10) TRANSMIT PROGRAM CHANGE ON/OFF................. 51
11) LOCAL CONTROL ON/OFF......................................... 53
12) MULTI-TIMBRAL MODE ON/OFF................................ 54
13) CHANNEL MUTE ......................................................... 55
14) SENDING PROGRAM CHANGE NUMBERS .............. 56
15) USER MEMORY........................................................... 57
16) FACTORY RESET........................................................ 58
11) PANEL LOCK ............................................................... 25
3. CONCERT MAGIC ............................26
SELECTING A SONG ............................................... 26
LISTENING TO THE SONG ...................................... 26
PERFORMING A SONG ........................................... 27
CONCERT MAGIC PART VOLUME BALANCE......... 27
CONCERT MAGIC SONG ARRANGEMENT TYPES ... 28
STEADY BEAT ......................................................... 29
CONCERT MAGIC DEMO MODES........................... 29
CONCERT MAGIC PLAYBACK SPEED.................... 30
‘
‘
‘
‘
‘
‘
‘
‘
7. APPENDICES....................................59
CONNECTING TO OTHER DEVICES....................... 59
ASSEMBLY INSTRUCTIONS .................................... 61
SPECIFICATIONS ..................................................... 63
MIDI EXCLUSIVE DATA FORMAT............................. 64
MIDI IMPLEMENTATION CHART ............................. 65
‘
‘
‘
‘
‘
4. LESSON FUNCTION.........................31
1) SELECTING A BOOK/SONG ........................................ 31
2) LISTENING TO AND PLAYING A SONG....................... 32
EXITING THE LESSON FUNCTION ......................... 32
PRACTICING THE LEFT AND RIGHT-HAND PARTS ... 32
ADJUSTING THE TEMPO OF A SONG.................... 32
‘
‘
‘
3) RECORDING A SONG PRACTICE ............................... 33
PLAYING BACK THE RECORDING.......................... 33
ERASING THE RECORDING.................................... 33
‘
‘
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
4
Important Safety Instructions
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING
TO REDUCE THE RISK OF
CAUTION
FIRE
OR
ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN
OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE
- NE PAS OUVRIR.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
equilateral triangle, is intended to alert the user to
the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
Examples of Picture Symbols
denotes that care should be taken.
The example instructs the user to take care not to allow fingers to be trapped.
denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.
denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.
Read all the instructions before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
4) Follow all instructions.
11) Only use attachments/accessories specified by
the manufacturer.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or object have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prongs are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
5
WARNING - When using electric products, basic precautions should always be followed,
including the following.
Indicates a potential hazard that could result in death
WARNING or serious injury if the product is handled incorrectly.
The product should be connected to
an AC outlet of the specified voltage.
● If you are going to use an AC power cord,
make sure that its has the correct plug shape
and conforms to the specified power voltage.
● Failure to do so may result in fire.
120V
230V
240V
Do not insert or disconnect the power
cord plug with wet hands.
Doing so may cause electric shock.
● Pulling the AC power cord itself may damage
the cord, causing a fire, electric shock or
short-circuit.
When disconnecting the AC power cord's
plug, always hold the plug
and pull it to remove it.
The product is not completely disconnected from the
power supply even when the power switch is turned
off. If the product will not be used for a long time,
unplug the AC power cord from the AC outlet.
● Failure to do so may cause fire in case of
lightning.
● Failure to do so may over-heat the product,
resulting in fire.
Doing so may cause a short circuit, leading to an
electric shock, or a fire.
Do not use the product in wet areas or areas
close to water.
● Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.
Do not stand on the product or exert
excessive force.
When using the headphones, do not
listen for long periods of
time at high volume levels.
Doing so may result in hearing problems.
Do not disassemble, repair or modify
the product.
Doing so may result in product breakdown, electric
shock or short-circuit.
Failure to do so may result in damage or an
accident.
Always follow the assembly instructions
carefully.
Do not lean against the keyboard.
Doing so may cause the product to fall over,
resulting in injury.
This product may be equipped with a polarized line plug (one blade
wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
6
Indicates a potential hazard that could result in injury
or damage to the product or other property if the
CAUTION product is handled incorrectly.
Do not use the product in the following areas.
Using the product in such areas may result in
product breakdown.
Use the product only in moderate climates (not
in tropical climates).
● Areas, such as those near windows, where the product is
exposed to direct sunlight
● Extremely hot areas, such as near a heater
● Extremely cold areas, such as outside
● Extremely humid areas
● Areas where a large amount of sand or dust is present
● Areas where the product is exposed to excessive vibrations
● Areas where the product is unstable.
● Doing so may cause the product to generate
Do not place the product near electrical
appliances such as TVs and
radios.
noise.
● If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.
● Do not use other AC adaptors to power this
instrument.
● Do not use the included AC adaptor or AC
power cord to power other equipment.
Use only the AC adaptor included with this
instrument to power the instrument.
Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.
When connecting the AC power cord
and other cords, take care
not to get them tangled.
It is a good practice to have the instrument near the AC outlet and the power cord plug in a position
so that it can readily be disconnected in an emergency because electricity is always charging
while the plug is in the AC outlet even in a power switch off condition.
Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.
Failure to do so may cause breakdown of this
product and other devices.
OFF
Take care not to allow any foreign
matter to enter the product.
Entry of water, needles or hair pins may result
in breakdown or short-circuit.
The product shall not be exposed to dripping or
splashing. No objects filled with liquids, such as
vases, shall be placed on the product.
● Doing so may result in discoloration or deformation
Do not wipe the product with benzene
or thinner.
of the product.
● When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.
Ensure that the ventilation is not
impeded by covering the ventilation
openings with items, such as newspaper,
table-cloths, curtains, etc.
Failure to do so may over-heat the product,
resulting in fire.
Please lift up the product when moving it.
Please note that the product is heavy and must
be carried by more than two persons.
Do not drag the product on the floor.
Take care not to drop the product.
Dropping the product may result in breakdown.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
7
Do not place naked flame, such as lighted
candles on the product.
Doing so may cause the illumination to fall over,
resulting in fire.
The product should be located so that its location or position does not interfere with its proper
ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.
The product should be serviced by qualified service personnel when:
● The power supply cord or the plug has been damaged.
● Objects have fallen, or liquid has been spilled into the product.
● The product has been exposed to rain.
●
The product does not appear to operate normally or exhibits a marked change in performance.
● The product has been dropped, or the enclosure damaged.
Notes on Repair
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the
power cord plug, and then contact the shop from which the product was purchased.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION:
Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu'au fond.
Instruction for AC power cord (U.K.)
Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a different electrical circuit from the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Radio Interference Regulations
This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio
Interference Regulations, C.R.C., c. 1374.
An information on Disposal for users
If your product is marked with this recycling symbol it means that, at the end of its
life, you must dispose of it separately by taking it to an appropriate collection point.
You should not mix it with general household waste. Disposing of this product correctly
will prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.
For further details, please contact your local authority.
(European Union only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
8
1. PART NAMES AND FUNCTIONS
This section explains the locations and functions of the panel buttons and sliders.
1
FRONT PANEL
‘
CONCERT MAGIC
z
LESSON
z
The Concert Magic function allows the
CN32 digital piano to be enjoyed by those
with little or no experience of playing the
piano, providing the correct accompaniment
and melody by simply pressing a single key
on the keyboard (page 26).
LED DISPLAY
z
The Lesson function provides access
to built-in etudes or Alfred lesson
books (USA, Canada, UK, AU only),
offering an enjoyable piano learning
experience (page 31).
The LED display provides useful
information such as the currently
selected sound type.It also shows
values or status when other
functions are active.
VALUE
z
The S and T VALUE
buttons are used to
adjust various settings
and functions.
MASTER VOLUME
SOUND SELECT
z
z
The MASTER VOLUME slider controls the master volume level of the
internal speakers and connected headphones. Move the slider to the
right to increase the volume, and to the left to decrease the volume.
This slider also controls the headphone volume and LINE OUT output
level (page 59).
The SOUND SELECT buttons are used to select the internal sound(s)
that will be heard when pressing the keys (page 12).These buttons can
also be used to select RECORDER songs and parts (page 34).
PEDALS
‘
The CN32 piano has three pedals: Damper/Sustain, Sostenuto, and Soft.
Damper/Sustain pedal
¡
Sustains the sound after hands are lifted from the keyboard. The sustain pedal is capable of
responding to half pedaling.
Sostenuto pedal
¡
Soft pedal
Damper/Sustain
pedal
Sostenuto pedal
Depressing this pedal after playing the keyboard and before releasing the keys sustains the
sound of only the keys just played. Any keys that are pressed after the Sostenuto pedal is
depressed will not be sustained after the keys are released.
Soft pedal
¡
Depressing this pedal softens the sound and reduces its volume.When the rotary effect is active
the soft pedal is used to change the speed of the rotor between slow and fast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
9
1
EFFECTS
z
The EFFECTS function adds chorus, delay,
tremolo, and rotary speaker simulation
effects to the sound (page 20).
BALANCE
METRONOME
z
z
The BALANCE slider is used to adjust the
volume balance between the two sounds in
Dual or Split modes, and also controls the
volume of left and right-hand parts of Lesson
songs (pages 14, 16 and 32).
The METRONOME function provides a
steady beat with which to aid piano practice.
The tempo, time signature, and volume
of the metronome can be freely adjusted
(page 23).
POWER SWITCH
z
The POWER SWITCH is used to turn the
CN32 digital piano on and off.Be sure to turn
off the instrument after playing (page 10).
REVERB
SPLIT
z
z
TheREVERBfunctionaddsreverberation
to the sound, simulating the acoustic
environment of a recital room, stage, or
concert hall (page 19).
TheSPLITfunctiondividesthe
keyboard into two sections—
Upper and Lower— allowing
each section to be played with
a different sound (page 15).
TOUCH
z
TheTOUCH function allows the touch sensitivity of the CN32 digital piano’s
keyboard to be adjusted (page 21).
TRANSPOSE
z
The TRANSPOSE function allows the audible pitch of the CN32 digital
piano to be raised or lowered in half steps (page 22).
RECORDER
z
The REC button is used for recording performances and when using the Lesson
function, to record practices for comparison with the built-in songs and etudes.
The PLAY/STOP button is used to select a song and part to play, and to start/stop
playback of the recorded songs.It is also used to start/stop playback when using
the Lesson function (page 34).
FUNCTION
z
Pressing theTOUCH andTRANSPOSE buttons simultaneously enters the
FUNCTION modes, allowing various advanced parameters of the CN32
digital piano to be adjusted (page 39).
HEADPHONES
‘
Headphone jack (x 2)
¡
There are two headphone jacks located on the left underside of
the piano.
Up to two pairs of headphones can be connected simultaneously.
For information on attaching the headphone hook, please refer
to the assembly instructions on page 62.
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
10
2. PLAYING THE PIANO
1) BASIC OPERATIONS
This section provides the basic procedures for turning the power on and playing the CN32 digital piano.
SETTING UP THE PIANO
‘
The CN32 digital piano is equipped with stereo speakers and an internal amplifier—no addition equipment is
required to begin playing the instrument, provided AC power is available.
2
Step 1
ꢀ
Connect one end of the AC power cable to the CN32 digital piano’s power
jack and the other end of the cable to a wall AC outlet.
Power
cable entry
point
Speaker
Side panel
Step 2
ꢀ
Press the POWER SWITCH to turn on the power.
The POWER SWITCH is located at the right end of the
front panel.
The LED indicator for the PIANO 1 button will turn
on, and the Concert Grand sound will be selected
ON
automatically.
Step 3
ꢀ
Adjust the volume level using the MASTER VOLUME slider.
The MASTERVOLUME slider controls the volume level
of the speakers and connected headphones.
Move this slider to the right to increase the volume and
move it to the left to decrease the volume.
Set the volume to a comfortable listening level—the
middle is often a good starting point.
Step 4
ꢀ
Play the piano.
The sound of a Concert Grand piano will be heard as
the keys are pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
11
2) DEMO SONGS
The internal demonstration songs provide an excellent introduction to the varied capabilities of the CN32 digital
piano, presenting the instrument’s rich selection of voices. There are 30 build-in demo songs, each presenting a
musical piece to introduce the different internal sounds.
„ PIANO 1
HARPSI & MALLETS
„
Concert Grand
Studio Grand
Mellow Grand
Modern Piano
„ PIANO 2
Concert Grand 2
Studio Grand 2
Mellow Grand 2
Rock Piano
:
:
:
:
KAWAI
KAWAI
Harpsichord
Vibraphone
Clavi
:
:
:
French Suite No.6 / Bach
KAWAI
KAWAI
Sonata No.30 Op.109 / Beethoven
KAWAI
STRINGS
„
Slow Strings
String Pad
String Ensemble
:
:
:
KAWAI
KAWAI
:
:
:
:
Waltz No.6 Op.64-1 “Petit chien” / Chopin
KAWAI
La Fille aux Cheveux de lin / Debussy
KAWAI
Le quattro stagioni La primavera / Vivaldi
CHOIR & PAD
„
Choir
Choir 2
New Age Pad
Atmosphere
:
:
:
:
KAWAI
KAWAI
KAWAI
KAWAI
2
ELECTRIC PIANO
„
Classic E.Piano
Modern E.P.
Modern E.P. 2
:
:
:
KAWAI
KAWAI
KAWAI
BASS
„
DRAWBER
Jazz Organ
Drawbar Organ
Wood Bass
Fretless Bass
W. Bass & Ride
:
:
:
KAWAI
KAWAI
KAWAI
„
:
:
KAWAI
KAWAI
Drawbar Organ 2: KAWAI
CHURCH ORGAN
„
Church Organ
Diapason
Full Ensemble
:
:
:
Toccata / Gigout
Wohl mir, daß ich Jesum habe / Bach
KAWAI
KAWAI regret that sheet music for KAWAI original demo songs is not available.
Step 1
ꢀ
Press the CONCERT MAGIC and LESSON buttons simultaneously.
The LED indicators for the CONCERT MAGIC and LESSON
buttons will turn on, and the SOUND SELECT buttons will
start to flash.
The Concert Grand demo song will start to play.
After the PIANO 1 demo songs have finished playing, the demo songs from another sound category will be selected
at random.
Step 2
ꢀ
While the Concert Grand demo song is playing, press the CHURCH ORGAN button.
The Church Organ demo song will begin to play.
After the CHURCH ORGAN demo songs have finished playing, the demo songs from another sound category will
be selected at random.
Step 3
ꢀ
Press the CONCERT MAGIC, LESSON, or PLAY/STOP buttons to exit the demo mode.
The LED indicators for the CONCERT MAGIC and LESSON
buttons will turn off, the SOUND SELECT buttons will stop
flashing, and the demo songs will stop playing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
12
3) SELECTING A SOUND
The CN32 digital piano features 36 realistic sounds suitable for various musical styles, with multiple sounds assigned
to each of the 9 category buttons listed below.
Button
Instrument name
Concert Grand
Button
Instrument name
Harpsichord
Harpsichord 2
Vibraphone
Clavi
Slow Strings
String Pad
Warm Strings
String Ensemble
Choir
Studio Grand
Mellow Grand
Modern Piano
Concert Grand 2
Studio Grand 2
Mellow Grand 2
Rock Piano
Classic E.Piano
Modern E.P.
60’s E.P.
Modern E.P. 2
Jazz Organ
Drawbar Organ
Drawbar Organ 2
Be 3
HARPSI & MALLETS
PIANO 1
STRINGS
CHOIR & PAD
BASS
PIANO 2
Choir 2
ELECTRIC PIANO
DRAWBAR
New Age Pad
Atmosphere
Wood Bass
Finger Bass
Fretless Bass
W. Bass & Ride
2
Church Organ
Diapason
Full Ensemble
Diapason Oct
CHURCH ORGAN
Step 1
ꢀ
Press the ELECTRIC PIANO button.
The LED indicator for the ELECTRIC PIANO button will
turn on.
ON
The variation number ‘1’ will be shown in the LED
display, indicating that the Classic E.Piano sound has
been selected.
Several sounds are assigned to each SOUND SELECT button. Press the same SOUND SELECT button multiple
times to cycle through each sound variation.
Step 2
ꢀ
Play the piano.
The sound of Classic E.Piano will be heard as the keys
are pressed.
Use the MASTER VOLUME slider to adjust the volume,
if necessary.
Step 3
ꢀ
Select other sounds.
Internal sounds can also be selected by pressing the S or T VALUE buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
13
4) DUAL MODE
The DUAL function allows two internal sounds to be layered together, creating a more complex sound.For example,
a piano can be layered with strings, or a church organ with a choir sound.
Step 1
ꢀ
Press and hold the PIANO1 button, then press the STRINGS button.
The LED indicators for the PIANO1 and STRINGS
buttons will turn on, indicating that both sounds have
been selected simultaneously, and DUAL mode has
been activated.
ON
ON
Press two SOUND SELECT buttons simultaneously
2
The selected sound variation numbers will be shown in
the LED display.
The left number represents the primary sound, while the
right number represents the secondary sound.
Step 2
ꢀ
Play the piano.
The Concert Grand and Slow Strings sounds will be
heard Simultaneously.
Step 3
ꢀ
Press and hold the STRINGS button, then press the PIANO1 button.
ON
2
ON
‘2-1’will be shown in the LED display, indicating that the
primary sound has changed to Studio Grand.
1
Press and hold the button
Step 4
ꢀ
Press and hold the PIANO1 button, then press the CHURCH ORGAN button three times.
The LED indicators for the PIANO1 and CHURCH ORGAN
buttons will turn on.
ON
ON
‘2-3’ will be shown in the LED display, indicating
that the secondary sound has been changed to Full
Ensemble.
2
1
Press and hold the button
Press three times
To combine two sounds assigned to the same SOUND SELECT button, first select the primary sound, next press and
hold the SOUND SELECT button, then press the S or T VALUE buttons to select the desired secondary sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
14
Step 5
ꢀ
Use the BALANCE slider to adjust the volume balance between the two sounds.
Increases the volume of
the sound assigned to the
leftmost selected SOUND
button
Increases the volume of
the sound assigned to
the rightmost selected
SOUND button
Step 6
ꢀ
Press any individual SOUND SELECT button to deactivate DUAL mode.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
15
5) SPLIT MODE
The SPLIT function divides the keyboard of the CN32 digital piano into Upper and Lower sections, allowing each
section to be played with a different sound.
Step 1
ꢀ
Press the SPLIT button.
The LED indicator for the SPLIT button will turn on,
indicating that SPLIT mode has been activated.
In addition, the LED indicator for the PIANO1 button
will also turn on, indicating the Upper section sound,
while the BASS button will start to flash, indicating
the Lower section.
ON
ON
2
The selected sound variation numbers will be shown
in the LED display.
The left number represents the Lower section, while
the right number represents the Upper section.
Step 2
ꢀ
Play the piano.
The Concert Grand sound will be heard in the Upper section, while the Wood Bass sound will be heard in the
Lower section. An ensemble performance can be enjoyed by playing the chords and the melody with the right
hand, while playing a bass line with the left hand.
The number of keys used for the Upper and Lower sections can be freely adjusted by changing the Split Point.
The default Split Point setting is set between B2 and C3.
„
Step 3
ꢀ
Press and hold the SPLIT button, then press a key on the keyboard.
ON
new Split Point
1
Press and hold the button
Lower section
Upper section
2
Press a key
The name of the pressed key will be shown in the LED display, and will become the new Split Point.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
16
Step 4
ꢀ
Press the PIANO2 button three times.
The LED indicator for the PIANO2 button will turn
on.
ON
‘1-3’ will be shown in the LED display, indicating
that the Upper section sound has been changed
to Mellow Grand 2.
Press three times
Step 5
ꢀ
Press and hold the SPLIT button, then press the HARPSI & MALLETS button twice.
2
The LED indicator for the HARPSI & MALLETS button
will start to flash.
ON
ON
2
1
Press twice
Press and hold the button
‘2-3’ will be shown in the LED display, indicating
that the Lower section sound has been changed
to Vibraphone.
Step 6
ꢀ
Use the BALANCE slider to adjust the volume balance between the upper and lower sections.
Lower section
Upper section
Step 7
ꢀ
Press the SPLIT button to deactivate split mode.
The LED indicator for the SPLIT button will turn off.
When SPLIT mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower
section. Please refer to the instructions on page 40 for more information.
„
„
The influence of the damper/sustain pedal over the Lower section can also be turned on and off. Please refer to the
instructions on page 41 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
17
6) FOUR HANDS MODE
The FOUR HANDS function divides the keyboard of the CN32 digital piano into separate Upper and Lower sections
in a similar way to that of the SPLIT function. In addition, the octave/pitch of each section is also adjusted,
allowing two people to play the piano together.
Split Point
Lower section
Upper section
c
2
c
c
Step 1
ꢀ
Press and hold the SPLIT button, then press the damper/sustain (right) pedal and the soft (left) pedal
together.
The LED indicator for the SPLIT button will start to
Damper/Sustain
flash, indicating that FOUR HANDS mode has been
Soft pedal
pedal
activated.
In addition, the LED indicator for the Upper section
Press and hold the button
sound button will also turn on, while the Lower
section sound button will start to flash.
The selected sound variation numbers will be shown
in the LED display.
Depress the pedals
The left number represents the Lower section, while
the right number represents the Upper section.
When activating FOUR HANDS mode for the first
time, the sound of both the Upper and Lower sections
will be set to Concert Grand.
Step 2
ꢀ
Play the piano.
With FOUR HANDS mode activated, the sounds in the Upper section are transposed two octaves down from the
original pitch, while sounds from the Lower section are transposed two octaves up from the original pitch, allowing
two people to play within the same key range.
The number of keys used for the Upper and Lower sections can be freely adjusted by changing the Split Point.
The default Split Point setting is set between E3 and F3.
„
„
When FOUR HANDS mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the
Lower section. Please refer to the instructions on page 40 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
18
Step 3
ꢀ
Press the SOUND SELECT buttons to adjust the Upper section sound.
ON
Step 4
ꢀ
Press and hold the SPLIT button, then press the SOUND SELECT buttons to adjust the Lower section
sound.
2
ON
2
1
Press and hold the button
Step 5
ꢀ
ꢀ
Press and hold the SPLIT button, then press a key on the keyboard to adjust the Split Point.
The FOUR HANDS mode Split Point will not affect the SPLIT mode Split Point.
„
Step 6
Press the SPLIT button again to deactivate FOUR HANDS mode.
The LED indicator for the SPLIT button will turn off, and the CN32 digital piano will return to the previously selected
sound.
It is also possible to activate FOUR HANDS mode by using the FOUR HANDS ON/OFF function in the Function menu.
Please refer to the instructions on page 45 for more information.
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
19
7) REVERB AND EFFECTS
The CN32 digital piano allows performers to alter sounds by adding reverb and applying effects.
When selecting some internal sounds, the LED indicators for the EFFECTS or REVERB buttons may turn on
automatically. This is because certain internal sounds are prepared with an effect enabled as the default setting,
enhancing tonal quality and improving acoustic realism.
ADDING REVERB
‘
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall.
There are five types of reverb available:
2
Reverb type
Room 1
Room 2
Stage
Description
Simulates the ambiance of a living room or small rehearsal room.
Simulates a larger room than Room 1.
Simulates the ambiance of a small hall or live stage.
Simulates the ambiance of a concert hall or theatre.
Simulates a larger hall or theatre than Hall 1.
Hall 1
Hall 2
Step 1
ꢀ
Press and hold the REVERB button, then press the S or T VALUE buttons to select the desired reverb
type.
2
1
Press and hold the button
Room 1
Room 2
Stage
Hall 1
Hall 2
The currently selected reverb type will
be shown in the LED display.
Step 2
ꢀ
Press the REVERB button again to deactivate the reverb simulation.
The LED indicator for the REVERB button will turn off, indicating that the reverb simulation has been
deactivated.
Pressing the REVERB button once again will reactivate the reverb simulation, recalling the previously selected
reverb type.
Reverb settings are specific to each individual sound.
„
„
„
Any changes made to the reverb type or on/off status will remain until the power is turned off.
When the power is turned off, the reverb settings will return to the default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
20
APPLYING EFFECTS
‘
Effects alter the impression and feeling of the sounds.
There are seven types of effect available:
Effect type
Description
Simulates the rich character of a vocal choir or string ensemble, by layering a slightly detuned version
Chorus
of the sound over the original to enrich it.
Delay 1
Delay 2
Adds an echo to the sound. There are three types of delay available, each with a different length of
delay between the echoes.
Delay 3
Tremolo
Rotary 1
Adds vibrato to the sound.
Simulates the sound of a rotary speaker cabinet commonly used with electronic organs. Rotary 1 is a
Rotary 2
normal rotary effect while and Rotary 2 adds distortion.
2
When either the Rotary 1 or Rotary 2 effect is selected, pressing the Soft pedal will alternate the speed of the rotary
speaker simulation between ‘Slow’ and ‘Fast’ effect modes.
„
Step 1
ꢀ
Press and hold the EFFECTS button, then press the S or T VALUE buttons to select the desired effect
type.
1
Press and hold the button
Chorus
Delay 1
Delay 2
Delay 3
Tremolo
The currently selected effect type will be shown
in the LED display.
Rotary 2
Rotary 1
Step 2
ꢀ
Press the EFFECTS button again to deactivate the effects.
The LED indicator for the EFFECTS button will turn off, indicating that the effects have been deactivated.
Pressing the EFFECTS button once again will reactivate the effects, recalling the previously selected effect type.
Effects settings are specific to each individual sound.
„
„
„
Any changes made to the effect type or on/off status will remain until the power is turned off.
When the power is turned off the effects settings will return to the default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
21
8)TOUCH CURVE
The TOUCH function allows different touch sensitivities for the keyboard to be selected, other than the standard
touch of an acoustic piano. The sensitivity can be changed to one of five different types: Light 2, Light 1, Heavy
1, Heavy 2 or Off.
Light 2
c
Light 1
d
Normal
e
:
:
:
For players with a delicate touch. Requires less striking
force to achieve a forte note.
Loud
For those still developing finger strength. A louder
volume is produced even when playing with a soft touch.
Reproduces the standard touch sensitivity of an acoustic
piano. This touch setting is selected when the LED
indicator for the TOUCH button is off.
Sound
volume
Heavy 1
f
:
Perfect for those with strong fingers. Requires a heavier
touch to produce a loud volume.
2
Heavy 2
Off
:
:
Requires more striking force to achieve a loud volume.
A constant volume is produced regardless of how hard
the keys are struck. This setting is suitable for sounds
that have a fixed dynamic range such as Organ and
Harpsichord.
g
h
Soft
Gentle
Force
applied to
the keys
Strong
Step 1
ꢀ
Press the TOUCH button.
The LED indicator for theTOUCH button will turn on, indicating
that a different touch type is being used.
Step 2
ꢀ
Press and hold the TOUCH button, then press the S or T VALUE buttons to select the desired TOUCH
type.
2
1
Press and hold the button
Heavy 2
Heavy 1
Light 1
Light 2
Off
The currently selected touch type
will be shown in the LED display.
Step 3
ꢀ
Press the TOUCH button again to return to the standard (Normal) touch setting.
The LED indicator for the TOUCH button will turn off, indicating that the Normal touch type is being used.
The touch setting is global for all of the internal sounds. It is not possible to have individual touch settings for each
internal sound.
„
Any changes made to the touch mode will remain until the power is turned off.
When the power is turned off, the touch settings will return to the default setting of ‘Normal’.
„
„
Note: LIGHT and HEAVY do not represent the physical weight of the keys. The touch type affects the sensitivity of the
keys, determining the volume level in response to the key movement.
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
22
9) TRANSPOSE
The TRANSPOSE function allows the audible pitch of the CN32 digital piano to be raised or lowered in half steps.
This is particularly useful when accompanying instruments with different tones, or when a song learned in one key
must be played in another key. The transpose feature allows the song to be played in the original key, but heard
in another key.
Step 1
ꢀ
Press and hold the TRANSPOSE button, then press the S or T VALUE buttons to specify the desired
transposition value.
The LED indicator for the TRANSPOSE button will turn on,
2
indicating that the transpose function has been activated.
2
1
The currently selected transpose setting will be shown in the
Press and hold the button
LED display.
The pitch can be transposed by up to 12 halftones higher or
12 halftones lower.
Alternatively, while holding the TRANSPOSE button, press the keys from C2 to C4, to set the desired
transpose value.
The ‘C’ key at the middle of
the keyboard corresponds to
the value 0
1
Press and hold the button
0
C
-12
+12
2
Step 1
ꢀ
Press the TRANSPOSE button again to deactivate the transpose function.
The LED indicator for the TRANSPOSE button will turn off, indicating that the transpose function has been
deactivated.
Pressing theTRANSPOSE button once again will reactivate the transpose function, recalling the previously selected
transpose value type.
Transpose is active when the LED indicator for the TRANSPOSE button is turned on, and the notes are transposed
according to the specified transpose value. For example, if the transpose setting is ‘-3’ and the LED indicator for the
TRANSPOSE button is turned on, and the notes will be transposed 3 half steps lower. When the LED indicator for
the TRANSPOSE button is turned off, the transpose setting will automatically return to ‘0’ (no transposition) with one
touch.
„
When the transpose value is set to ‘0’, the LED indicator for the TRANSPOSE button will not turn on.
Any changes made to the transpose value will remain until the power is turned off.
„
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
23
10) METRONOME
Rhythm is one of the most important elements when learning music. It is important to practice playing the piano
at the correct tempo and with a steady rhythm. The CN32 digital piano’s metronome function helps learners to
achieve this by providing a steady beat to play along with.
STARTING THE METRONOME
‘
ꢀ
Step 1
Press the TEMPO button.
The LED indicator for the TEMPO button will turn on, and the metronome will begin
2
counting with a 4/4 beat.
The metronome tempo in beats per minute (BPM) will be shown in the LED display.
Step 2
ꢀ
Press the S or T VALUE buttons to adjust the metronome tempo to the desired value.
The metronome tempo can be adjusted within the range of 10-400 beats per minute.
Step 3
ꢀ
Press the TEMPO button again to deactivate the metronome.
The LED indicator for the TEMPO button will turn off, indicating that the metronome has been deactivated.
Any changes made to the metronome tempo will remain until the power is turned off.
„
„
When the power is turned off, the metronome tempo will return to the default setting of ‘120’ (120 BPM).
CHANGING THE METRONOME TIME SIGNATURE
‘
ꢀ
The metronome produces two types of click, with a bell sound indicating the first beat of a bar - this is a 4-beat or
4/4 time signature. It is possible to select a different signature where appropriate. There are seven different types
of time signature available: 1/4, 2/4, 3/4, 4/4, 5/4, 3/8, and 6/8.
Step 1
Press the BEAT button.
The LED indicator for the BEAT button will turn on and the metronome will begin
counting with a 4/4 beat.
The metronome time signature will be shown in the LED display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
24
Step 2
ꢀ
Press the S or T VALUE buttons to select the desired time signature.
The currently selected time signature will be shown in the LED display.
1/4
2/4
3/4
4/4
5/4
3/8
6/8
Step 3
ꢀ
Press the BEAT button again to deactivate the metronome.
2
The LED indicator for the BEAT button will turn off, indicating that the metronome has been deactivated.
Both the TEMPO button and the BEAT button can be used to activate and deactivate the metronome, depending
on whether the tempo or time signature is being adjusted.
Any changes made to the metronome time signature setting will remain until the power is turned off.
When the power is turned off, the metronome time signature will return to the default setting of ‘4/4’.
„
„
ADJUSTING THE METRONOME VOLUME
‘
ꢀ
The volume level of the metronome can also be adjusted.
Step 1
Press the TEMPO and BEAT buttons simultaneously.
The LED indicators for both the TEMPO and BEAT buttons will turn on, and the
metronome will begin counting with the previously selected time signature.
The metronome volume will be shown in the display.
Step 2
ꢀ
Press the S or T VALUE buttons to adjust the metronome volume to the desired level.
The metronome volume can be adjusted within the range of 1 (soft) to 10 (loud).
Step 3
ꢀ
Press the TEMPO and BEAT buttons simultaneously again to deactivate the metronome.
The LED indicators for the TEMPO and BEAT buttons will turn off, indicating that the metronome has been
deactivated.
Any changes made to the metronome volume will remain until the power is turned off.
When the power is turned off, the metronome volume will return to the default setting of ‘5’.
„
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
25
11) PANEL LOCK
The Panel Lock function allows the state of all panel buttons to be temporarily locked, preventing sounds and other
settings from being changed accidentally while playing the piano.
Step 1
ꢀ
Press the CONCERT MAGIC and TRANSPOSE buttons simultaneously.
2
The CN32 control panel will stop responding to button pushes.
The letters ‘Lok’ will be shown in the LED display, indicating that the button panel is
locked.
Step 2
ꢀ
Press the CONCERT MAGIC and TRANSPOSE buttons simultaneously again to deactivate the panel
lock.
The CN32 control panel will return to normal operation.
When the power is turned off, the Panel Lock function will be released.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
26
3. CONCERT MAGIC
The great German composer Johann Sebastian Bach once said “Playing the keyboard is simple. Just strike the
right keys at the right time”. Many pianists wish it were quite that straightforward. Fortunately, KAWAI have devised
a method of playing the keyboard that is very simple, without even needing to strike the right keys.
With CONCERT MAGIC, absolutely anyone can sit at the CN32 digital piano and make real music - even complete
beginners who have never taken a piano lesson in their life.To enjoy performing with Concert Magic, simply select a
favorite piece from the 88 pre-programmed songs and tap any key with a steady rhythm and tempo. Concert Magic
will provide the correct melody and accompaniment notes, regardless of which keys are pressed. With Concert
Magic anybody, young or old, can enjoy playing music from the moment they sit down at the CN32 digital piano.
SELECTING A SONG
‘
ꢀ
The 88 Concert Magic songs are assigned to each of the 88 keys, and classified by song category into eight groups,
such as Children’s Songs, American Classics, Christmas Songs etc. Please refer to the separate ‘Concert Magic
Song List / Lesson Song List’ booklet for a complete listing of available Concert Magic songs.
3
Step 1
Press and hold the CONCERT MAGIC button, then press the key to which the desired Concert Magic song is
assigned.
Song No.
The song number will be briefly shown in the display.
Hold down the button
Press a key
LISTENING TO THE SONG
‘
If the performer is already familiar with the selected Concert Magic song, he/she may wish to begin playing straight
away. However, those unfamiliar with the piece may alternatively wish to listen to the song first, before attempting
to play it.
Step 1
ꢀ
Press the PLAY/STOP button.
The selected Concert Magic song will start to play.
While listening, different Concert Magic songs can be selected by pressing the VALUE buttons.
Step 2
ꢀ
Press the PLAY/STOP button again to finish listening to the song.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
27
PERFORMING A SONG
‘
ꢀ
Step 1
Tap out the rhythm of the selected song on any black or white key.
Concert Magic songs will respond to changes in playing style. As the keys are tapped harder, the music will grow
louder;if the keys are tapped more softly, the music will become quieter.Tapping faster will cause the music to speed
up, while tapping slower will make the music slow down accordingly. Using Concert Magic, even inexperienced
pianists can sound like they have been playing for years, simply by pressing one key with one finger.
Concert Magic is a perfect method for small children to learn music, especially when developing a sense of rhythm.
For older people who may believe it is too late to learn the piano, Concert Magic offers an enjoyable first step.
With Concert Magic, the CN32 digital piano can be enjoyed by everyone in the family, even those who have never
touched a musical instrument in their life.
3
CONCERT MAGIC PART VOLUME BALANCE
‘
ꢀ
When used with Concert Magic, the BALANCE slider adjusts the volume balance of the melody part and the
accompaniment.
Step 1
Use the BALANCE slider to adjust the volume balance.
Accompaniment
Melody
As the slider is moved to the right, the sound of the melody becomes louder and the accompaniment becomes
softer. The balance changes in the opposite way when the slider is moved to the left.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
28
CONCERT MAGIC SONG ARRANGEMENT TYPES
‘
After playing with Concert Magic for a while, performers may feel that such playing is too easy and that there is
very little to learn. While it is true that some of the songs are very easy to play, even for beginners, there are also
some songs which will prove challenging, and require practice to play proficiently.
Each of the 88 Concert Magic songs fall into one of three different arrangement types, depending on the skill level
required to perform them.
EASY BEAT
These are the easiest songs to play. To perform them, simply tap out a constant steady beat on any key on the keyboard.
Look at the following example, ‘Für Elise’. Press the key with a steady sixteenth note rhythm.
„
Key on
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
MELODY PLAY
„
3
These songs are also quite easy to play, especially if they are familiar to the player. To perform them, tap out the
rhythm of the melody on any key on the keyboard. Singing along as the rhythm is tapped can be helpful.
Play ‘Twinkle, Twinkle, Little Star’ for example. Follow the melody’s rhythm as shown.
Key on
X
X
X
X
X
X
X
X
X
X
X
X
X
X
When performing fast songs with Concert Magic, it is sometimes easier to tap two different keys with two alternating
fingers in order to play at greater speed.
SKILLFUL
These songs range in difficulty from moderately difficult to difficult. To perform them, tap out the rhythm of both the
melody and the accompaniment notes on any key on the keyboard, such as ‘Waltz of the Flowers’ shown below.
„
Key on
X
X
X
X
X
X
X
X
X
X
X
X
X
It may take a little practice to perform the Concert Magic songs proficiently. A good way to learn is to listen to these
pieces first, and then try to tap out the rhythms that are heard.
The separate ‘Concert Magic Song List / Lesson Song List’ booklet lists the arrangement type next to each song title as
‘EB’ for Easy Beat, ‘MP’ for Melody Play and ‘SK’ for Skillful.
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
29
STEADY BEAT
‘
Steady Beat allows Concert Magic songs to be played by simply tapping any key with a constant steady beat,
regardless of the song arrangement type.
Step 1
ꢀ
ꢀ
Press and hold the CONCERT MAGIC button.
The currently selected Concert Magic mode will be shown in the LED display.
Step 2
While still holding the CONCERT MAGIC button, use theVALUE button to change the Concert Magic mode
to STEADY BEAT (C-2).
3
Hold down the button
Step 3
ꢀ
‘
Start by tapping any key with a constant steady beat.
The tapping speed will set the tempo for the song. Both the accompaniment and melody parts will be played
automatically in time with the tapped tempo.
CONCERT MAGIC DEMO MODES
There are three ways to listen to the Concert Magic songs in the DEMO mode.
ALL PLAY
¡
Press the CONCERT MAGIC button and then press the PLAY/STOP button without selecting a song. The CN32
digital piano will play back all of the Concert Magic songs in order.
RANDOM PLAY
¡
Press the CONCERT MAGIC button and then press the LESSON button.The CN32 digital piano will play back all
of the Concert Magic songs in random order.
CATEGORY PLAY
¡
Press and hold the CONCERT MAGIC and LESSON buttons and press the piano key to which the desired song is
assigned. The CN32 digital piano will play back the selected song and then continue to play the rest of the songs
in the same category.
To stop the demo, press the PLAY/STOP button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
30
CONCERT MAGIC PLAYBACK SPEED
‘
ꢀ
The TEMPO button is also used to adjust the playback speed of Concert Magic songs.
Step 1
After selecting a Concert Magic song to play back, press and hold the TEMPO button.
The current tempo will be shown in the LED display.
Step 2
ꢀ
While holding down the TEMPO button, use the VALUE buttons to change the tempo.
Increase the tempo
Hold down the button
Decrease the tempo
The tempo of the selected Concert Magic song can be adjusted either before play back, or while the song is
playing.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
31
4. LESSON FUNCTION
The CN32 digital piano’s Lesson function helps performers to practice the piano with a collection of etudes from
Czerny and Burgmüller, or songs from Alfred’s Basic Piano Library and Alfred’s Premier Piano Course lesson books
(USA, Canada, Australia and UK only). It is possible to listen to each etude or song at various tempos, practicing
the left and right hand parts separately, before eventually recording a practice session for self-evaluation.
Alfred’s Basic Piano Library and Alfred’s Premier Piano Course lesson books are sold separately. Please check
with local dealers or contact Alfred’s customer service by telephoning 818-892-2452 (USA & Canada), 0-95240033
1) SELECTING A BOOK/SONG
Step 1
ꢀ
Press the LESSON button.
The LED indicator for the LESSON button will turn on to indicate
that lesson mode is enabled.
An alphabet letter and a 2-digit number will be shown in the LED
display. The alphabet letter refers to a song book and the 2-digit
number refers to a song number.
4
Lesson availability differs according to geographical location:
Letter
Lesson Book Name
A
B
C
D
B
C
Alfred’s Premier Piano Course Lesson 1A
Alfred’s Premier Piano Course Lesson 1B
Alfred’s Basic Piano Library Lesson Book Level 1A
Alfred’s Basic Piano Library Lesson Book Level 1B
Burgmüller: 25 Progressive Pieces, Opus 100
Czerny: 30 Czerny Etudes de Mécanisme, Opus 849
US, Canada,
UK, Australia
Rest of
the World
Step 2
ꢀ
Press and hold the LESSON button, then press the S or T
VALUE buttons to select the desired lesson book type.
Hold down the button
Step 3
ꢀ
Press the S or T VALUE buttons (without holding the LESSON
button) to select the desired lesson song.
It is also possible to select a song directly by holding down the
LESSON button and pressing a key on the keyboard. Please refer
to the separate‘Concert Magic Song List / Lesson Song List’booklet
for a complete listing of available lesson songs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
32
2) LISTENING TO AND PLAYING A SONG
Step 1
ꢀ
Press the PLAY/STOP button to play the selected song.
There will be a one bar count-in before the song starts to play.
Press the PLAY/STOP button to stop and reset the song.
If the PLAY/STOP button is pressed again, the song will restart from the beginning.
EXITING THE LESSON FUNCTION
‘
ꢀ
Step 1
Press the LESSON button.
The LED indicator of the LESSON button will turn off, and the CN32
digital piano will return to normal operation mode.
PRACTICING THE LEFT AND RIGHT-HAND PARTS
‘
ꢀ
The volume balance of the left and right-hand parts can be adjusted using the BALANCE slider.
Step 1
Use the BALANCE slider to adjust the volume balance.
4
Decreases the volume of
the right-hand part
Decreases the volume of
the left-hand part
Moving the balance slider partially to the left will gradually decrease the volume of the right-hand part, allowing
the right-hand part to be practiced while the pre-recorded part plays softly as a guide. When the balance slider is
moved fully to the left, the pre-recorded right-hand part will be muted completely.
ADJUSTING THE TEMPO OF A SONG
‘
ꢀ
Step 1
Press and hold the TEMPO button then press the S or T VALUE buttons to increase or decrease the
tempo of the song.
To reset the tempo to the default speed, select another song.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
33
3) RECORDING A SONG PRACTICE
While in Lesson mode, song practice can be recorded for playback and self-evaluation.The pre-recorded left and
right-hand parts will be heard while the song practice is recorded. As noted previously, the BALANCE slider may
be used to mute either pre-recorded left or right-hand parts.
Step 1
ꢀ
ꢀ
ꢀ
Use the BALANCE slider to adjust the volume balance.
Decrease the volume of
the right-hand part
Decrease the volume of
the left-hand part
Step 2
Press the REC button.
There will be a one bar count-in before the recording starts.
Step 3
Press the PLAY/STOP button again to stop the recording and reset the song to the beginning.
Recording will also stop automatically at the end of the lesson song.
4
PLAYING BACK THE RECORDING
‘
ꢀ
Step 1
Press the PLAY/STOP button to listen to the recording.
The recorded performance will be played.The left and right-
hand playing volume can be changed using the BALANCE
slider.
Accompaniment
Melody
ERASING THE RECORDING
Step 1
‘
ꢀ
Press the PLAY/STOP and REC buttons simultaneously to erase the recording.
Recordings made while using the Lesson function cannot be saved and are intended for temporary reference only. When
changing to another song, exiting the Lesson function or turning off the CN32 digital piano power, Lesson recordings
will be erased.
„
Preset Lesson songs cannot be permanently overwritten or erased.
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
34
5. RECORDER
The RECORDER function records performances in a similar way to that of a tape recorder. However, the CN32
digital piano records songs as digital data, instead of audio data - storing the music inside the instrument. Because
each song is stored digitally, it is possible to modify various aspects during playback, such as adjusting the tempo
without changing the pitch, or selecting different sound types and effects settings. Once fully understood, the
recorder function provides an easy to use tool for both practicing and playing the piano.
1) RECORDING (REC BUTTON)
The CN32 digital piano allows up to three different songs to be recorded, stored in memory, and played back at
the touch of a button. Each song has two separate tracks called ‘Parts’ that can be recorded independently. This
allows the left-hand part to be recorded first on one track, then the right-hand part to be recorded later on the other
track, while listening to the first part.
When recording or playing back a song, each part (track) can be re-recorded or played back freely. Attempting to
re-record a part will automatically erase all previously recorded performance information for that part, therefore when
recording parts separately, it is most important to select the correct part carefully, in order to prevent accidentally
overwriting a previously recorded part.
The REC button is used for recording.
The SONG buttons and PART buttons correspond to the SOUND SELECT buttons.
Step 1
ꢀ
Press and hold the REC button, then select a SONG (1, 2 or 3) and PART number (1 or 2).
5
1
Hold down the REC button
2
3
Select a song
Select a part
While pressing the REC button, the LED indicators for one SONG button and one PART button will start to flash,
indicating the song and the part to be recorded.
During this time, the SONG and PART to be recorded can be changed freely by pressing the desired SONG
or PART button.
If no PART is selected PART1 will be selected automatically.
When the REC button is released, the LED indicators for the selected SONG and PART buttons will stop flashing
and the LED indicator for the REC button will turn on.This is the Standby state for recording. Furthermore, the LED
indicator for the SOUND SELECT button will also turn on, allowing the sound for recording to be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
35
Step 2
ꢀ
Start to play the piano.
The recorder will automatically start recording with the first note played.
During this time, the LED indicators for the REC and PLAY/STOP buttons will be turned on.
Any changes made to the sound while recording will also be recorded.
The recording can be started by pressing the PLAY/STOP button instead of pressing a key, allowing a blank bar
to be inserted at the beginning of a song.
Step 3
ꢀ
Press the PLAY/STOP button to stop recording.
The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will
be saved to memory automatically.
Saving may take a few moments and during this time the piano will not respond to any other operations.
To record the piece again, simply repeat the above procedure.The new recording will completely erase the previous
one.
RECORDING A SECOND PART
‘
ꢀ
A second part can be recorded in the second track of the same song. After recording the first part, select the other
track and record the second part.
5
Step 1
Press and hold the REC button again and press the BASS button to select to record PART2.
1
2
Select part 2
Hold down the REC button
The LED indicators for the SONG1 button and PART2 button will start to flash, indicating that they are selected
for recording.
Furthermore, the LED indicator for the PART1 button will now be turned on, indicating that PART1 has already
been recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
36
Step 2
ꢀ
Start to play the piano.
While recording the second part, the previously recorded first part will also play.During this time, the LED indicators
for the REC button and PLAY/STOP button will be turned on.
To start playing back the first part and then recording the second part from a certain point, later in the song, press
the PLAY/STOP button instead of playing the keyboard to start playback, then begin recording the second part
when necessary.
Step 3
ꢀ
Press the PLAY/STOP button to finish recording.
The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will
be saved to memory automatically.
The total recording capacity of the CN32 digital piano’s memory is approximately 15,000 notes, with button and pedal
presses also counted as one note.
„
When the maximum capacity is reached, recording will stop and all music recorded up until that point will be saved to
memory automatically.
Performance data stored inside the CN32 digital piano’s memory will be saved even after turning off the power.
It is possible to temporarily turn off (mute) a previously recorded part, for example PART1, before recording a new part, for
example PART2. This function can be useful to avoid distraction while recording. To mute PART1, hold the PLAY/STOP
button and press the PART1 button, the LED indicator for PART1 will turn off.
Panel operations stored during recording:
„
„
5
„
„
x Changes made to the sound type.
x Shifts between DUAL and SPLIT modes.
Panel operations NOT stored during recording:
x Changes made to effect settings – the selected effect will be applied to the selected sound type.
x Changes made to temp (the tempo set immediately before recording will be stored, however).
x Changes made using the BALANCE slider in DUAL or SPLIT modes – the volume balance set immediately before
recording will be stored, however.
x Turning the TOUCH CURVE or TRANSPOSE functions ON or OFF – regardless of the transpose settings the
performance will be replayed at the pitch originally used for the recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
37
2) PLAYING BACK A SONG
The PLAY/STOP button is used to start and stop playback of the recorded song, and to also select which
song and part is played.
Step 1
ꢀ
Press the PLAY/STOP button to start playing the recorded song.
1
2
Hold down the button
Press the PLAY/STOP button again to stop playback.
To select a different song for playback, hold the PLAY/STOP button and press the SOUND SELECT button that
corresponds to the desired song. The song will begin playback when the two buttons are released.
While the song is being played, performance information is also sent to supported devices as MIDI data (See page 47).
PART1 is sent on 1ch and PART2 is sent on 2ch. When recording in DUAL mode, additional information for PART1 is
sent on 9ch and additional information for PART2 is sent on 10ch.
„
PLAYING BACK RECORDED PARTS SEPARATELY
‘
When selecting a song recorded with two parts, it is possible to playback PART1 and PART2 separately.
First hold the PLAY/STOP button.If LED indicators corresponding to PART1 and PART2 turn on, both parts have been
recorded successfully. Releasing the PLAY/STOP button will begin playing PART1 and PART2 simultaneously.
Step 1
ꢀ
Press and hold the PLAY/STOP button, then press the SOUND SELECT button that corresponds to either
PART1 or PART2.
5
1
2
Hold down the button
The LED indicator will turn off accordingly, indicating that the part will not be played back.
The song will begin playback when the PLAY/STOP button is released.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
38
3) ERASING A SONG
This function allows any songs that are no longer listened to, to be cleared.
Step 1
ꢀ
Press and hold the REC and PLAY/STOP buttons.
The LED indicators will display which songs have been recorded.
Step 2
ꢀ
While holding the REC and PLAY/STOP buttons, select the desired song to be erased by pressing the
corresponding SOUND SELECT button.
The LED indicator of the selected song will start to flash.
Step 3
ꢀ
While still holding the REC and PLAY/STOP buttons, select the desired PART to be erased by pressing the
corresponding SOUND SELECT button.
1
2
3
Hold down the both buttons
The LED indicator of the selected PART will turn off, indicating that the part has been erased.
In the diagram above, PART1 of Song 2 is erased.
When both PART1 and PART2 of a song are erased, the song becomes empty. Selecting the song only, without
selecting PART1 and/or PART2, will not erase it.
Repeat the steps above in order to erase a number of songs and parts.
„
„
To erase all songs from memory at once, first turn off the power and then turn it on again, holding down both the REC
5
button and the PLAY/STOP button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
39
6. FUNCTION BUTTONS
The function settings are responsible for controlling various advanced parameters within the CN32 digital piano,
and can be selected by pressing a combination of buttons.
ENTERING A FUNCTION MODE
‘
ꢀ
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press one of the other panel buttons shown
below.
Lower Octave Shift
Lower Pedal On/Off
Damper Hold On/Off
Damper Effect
String Resonance
Four Hands On/Off
Tuning
Temperament
MIDI Channel
Transmit Program Change On/Off
Local Control On/Off
Multi-Timbral Mode On/Off
Channel Mute
Sending Program Change Number
User Memory
Factory Reset
1
2
Hold down both buttons
The LED indicator for the corresponding button will start to flash, indicating that the function is selected.
EXITING A FUNCTION MODE
‘
ꢀ
6
Step 1
Press any of the panel buttons shown below.
The LED indicator for the button will stop flashing and return to its normal state.
When the power is turned off, settings will be reset to the factory default value.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
40
1) LOWER OCTAVE SHIFT
This function allows the lower part to be raised by one, two, or three octaves when using SPLIT mode.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the CONCERT MAGIC button.
1
2
Hold down both buttons
The display will alternate between showing ‘Lot’ (Lower Octave) and a number, representing how many octaves
the lower part is shifted up.
Step 2
ꢀ
Press the S or T VALUE buttons to set the desired lower octave shift range.
Lower Octave Shift
Lower Octave Shift can be set from 0 to 3.
The CN32 digital piano’s lower octave shift setting defaults to ‘0’ each time the power is turned on.
„
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
41
2) LOWER PEDAL ON/OFF
This function determines whether or not pressing the damper pedal will also sustain the Lower section sounds
when in SPLIT mode. The default setting is off, which means the sustain pedal is not active for lower part sound.
The sustain pedal will still be active for the upper sound.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the LESSON button.
1
2
Hold down both buttons
The display will alternate between showing ‘LPd’ (Lower Pedal) and on/off status. The default is off.
Step 2
ꢀ
Press the S or T VALUE buttons to toggle lower pedal on and off.
Lower Pedal
OFF
ON
The CN32 digital piano’s lower pedal setting defaults to ‘OFF’ each time the power is turned on.
„
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
42
3) DAMPER HOLD ON/OFF
This determines if the sound such as organ or strings should be held (on) or gradually decayed (off) when the
damper pedal is depressed.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the PIANO 1 button.
2
1
Hold down both buttons
The display will alternate between showing ‘dMP’ (Damper) and on/off status. The default is off.
Step 2
ꢀ
Press the S or T VALUE buttons to toggle damper hold on and off.
Damper Hold
OFF
ON
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
43
4) DAMPER EFFECT
When the damper pedal is depressed on an acoustic piano, all dampers are lifted up, allowing the strings to vibrate
freely. When a note or chord is played on the piano with the damper pedal depressed, not only will the strings of
the notes played vibrate, but also the strings of other notes, vibrating in sympathetic resonance.The Damper Effect
function of the CN32 digital piano attempts to simulate this phenomenon.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the PIANO 2 button.
2
1
Hold down both buttons
The display will alternate between showing ‘dEF’ (Damper Effect) and a number that represents the value.
Step 2
ꢀ
Press the S or T VALUE buttons to select the desired setting.
Damper Effect
OFF
1
10
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
44
5) STRING RESONANCE
String Resonance refers to a phenomenon present among acoustic pianos, whereby the strings of held notes
resonate ‘sympathetically’ with other notes of the same harmonic series. The String Resonance function of the
CN32 digital piano attempts to simulate this phenomenon.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the ELECTRIC PIANO button.
2
1
Hold down both buttons
The display will alternate between showing ‘Str’ (String Resonance) and a number that represents the volume.
Step 2
ꢀ
Press the S or T VALUE buttons to set the volume within a range of ‘Off’, 1 to 10.
String Resonance
OFF
1
10
5 is the default setting.
String resonance will not be active when ‘Off’ is selected.
About string resonance
„
Even when the sustain pedal is not depressed on an acoustic piano, the strings for any notes held will be un-damped
and will resonate freely in sympathy with the strings of other notes that are played if they are part of the same harmonic
series. In addition, adjacent notes will also be resonated. The string resonance function simulates this phenomenon.
This is called “string resonance.”
For example, when you play the keys shown below while holding down the C key, the string of the C key resonates and
produces a sound.
(Quietly press and hold down the C key, and then quickly tap each of the keys shown below. It should be possible to hear
the string resonate.)
D
B
B
6
C
F G
B
F G
C
G
C
E
G
C D E
G
C
Hold down the key
When a key is played while holding down an adjacent key, an acoustic piano produces a sound as a result of string
resonance. The CN32 digital piano simulates this phenomenon.
„
The string resonance volume defaults to ‘5’ each time the power is turned off.
String resonance is not active when the sustain pedal is depressed.
The string resonance function is effective only for the acoustic piano sounds.
„
„
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
45
6) FOUR HANDS ON/OFF
This function allows FOUR HANDS mode to be activated or deactivated using an alternative method.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the DRAWBAR button.
2
1
Hold down both buttons
The display will alternate between showing ‘4Hn’ (FOUR HANDS) and on/off status. The default is off.
Step 2
ꢀ
Press the S or T VALUE buttons to toggle FOUR HANDS on and off.
FOUR HANDS
OFF
ON
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
46
7) TUNING
The TUNING function allows the CN32 digital piano’s pitch to be finely adjusted, and may prove useful when
playing with other instruments.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the CHURCH ORGAN button.
2
1
Hold down both buttons
The display will alternate between showing ‘tun’ (Tuning) and a number representing the pitch for ‘A’ in Hz
(Hertz).
Step 2
ꢀ
Press the S or T VALUE buttons to raise or lower the pitch.
Tuning
=
427.0 ~ 453.0
The pitch will increase or decrease by 0.5 Hz increments each time one of the VALUE buttons is pressed.
The range of adjustment is from 427.0 to 453.0 Hz (displayed as 27.0 – 53.0).
The factory default value is set to the modern standard A = 440.0 Hz (displayed as 40.0).
When pressing a key while using tuning mode, the sound that was selected prior to entering tuning mode will be heard.
To use a different sound while tuning, first exit the tuning mode, select the desired sound, then repeat ‘Step 1’ and ‘Step
2’ again.
„
„
When the power is turned off, tuning settings will reset to the factory default value of 440.0 Hz (displayed as 40.0).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
47
8) TEMPERAMENT
The CN32 digital piano offers immediate access to a variety of musical temperaments popular during the Renaissance
and Baroque periods. It may prove interesting and educational to experiment with different temperaments, other
than the modern ‘equal temperament’ standard this is dominant in music today.
BRIEF EXPLANATION OF TEMPERAMENTS
EQUAL TEMPERAMENT
(PIANO ONLY)
This is the default temperament. If a piano sound is selected the tuning is
stretched like an acoustic piano (EQUAL TEMPERAMENT). If any other type of
sound is selected the tuning will be EQUAL (FLAT). An explanation of EQUAL
TEMPERAMENT and EQUAL TEMPERAMENT (FLAT) is provided later in this
section.
If a piano sound is used in a layer with any other sound, then both sounds will
use the EQUAL TEMPERAMENT (stretched) tuning.
MERSENNE PURE TEMPERAMENT
(MAJOR)
This temperament, which eliminates dissonances for thirds and fifths, is still
popular for choral music because of its perfect harmony.
Performers must be aware which key they are playing in when using this
temperament.
MERSENNE PURE TEMPERAMENT
(MINOR)
Any key modulation will result in dissonances.When playing music in a particular
key, the key of the temperament must also be correctly matched.
When playing in a major key select Pure (Major) and when playing in a minor
key select Pure (minor).
PYTHAGOREAN TEMPERAMENT
MEANTONE TEMPERAMENT
This temperament, which uses mathematical ratios to eliminate dissonance
for fifths, is very limited for use with chords, but it produces very characteristic
melodic lines.
This temperament, which uses a mean between a major and minor whole tone to
eliminate dissonance for thirds, was devised to eliminate the lack of consonances
experienced with certain fifths for the Mersenne pure temperament. It produces
chords that are more beautiful than those with the equal temperament.
WERCKMEISTER III TEMPERAMENT
KIRNBERGER III TEMPERAMENT
These two temperaments are placed in between Meantone and Pythagorean.
For music with few accidentals, this temperament produces the beautiful chords
of the mean tone, but as accidentals increase, the temperament produces the
characteristic melodies of the Pythagorean temperament. It is used primarily for
classical music written in the Baroque era to revive the original characteristics.
This is an‘unstretched’equal temperament that divides the scale into twelve equal
EQUAL TEMPERAMENT (FLAT)
EQUAL TEMPERAMENT
semitones.This produces the same chordal intervals in all twelve keys, and has
the advantage of limitless modulation of the key. However the tonality of each
key becomes less characteristic and no chord is in pure consonance.
This is the most popular piano temperament. The hearing ability of a human is
uneven and is not as accurate with high frequency and low frequency as it is
with the middle range. This temperament’s tuning is stretched to compensate
for this so the sound will be heard naturally to the ears. This ‘stretched’ equal
temperament is a practical variation of the ‘unstretched’ equal temperament
which was invented on a mathematical basis.
6
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the HARPSI & MALLETS button.
2
1
Hold down both buttons
The display will alternate between showing‘tMP’(Temperament) and a symbol to indicate which type of temperament
is in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
48
Step 2
ꢀ
Press the S or T VALUE buttons to change the type of temperament.
Temperament
Equal (Piano)
Pure (Major)
Pure (Minor)
Equal (Flat)
Pythagorean
Meantone
Equal
Kirnberger III
Werckmeister III
When the power is turned off, the temperament will reset to the factory default ‘equal temperament (piano only)’
type.
If a piano sound is selected when using the factory default ‘equal temperament (piano only)’ type, the tuning is
stretched like an acoustic piano (EQUAL TEMPERAMENT). If any other type of sound is selected, the tuning will
be EQUAL (FLAT).
After selecting the desired temperament, please read the following section on selecting a key signature for the temperament
before continuing.
„
KEY SIGNATURE OF TEMPERAMENT
‘
Limitless modulation of the key became available only after the invention of equal temperament. When using a
temperament other than equal temperament, care must be taken to choose the key signature to play in.For example,
if the song to be played is written in D major, ‘D’ would be chosen as the temperament key.
Step 1
ꢀ
Press one of the 88 piano keys to select the key signature of the temperament.
The note name of the key pressed will be shown in the display and chosen as the key of the temperament.
6
Changing the key of the temperament will only change the ‘balance’ of the tuning, the pitch of the keyboard will remain
unchanged. Use the TUNING or TRANSPOSE functions to change the pitch of the whole keyboard.
The key of the temperament function will have no effect when equal temperament is selected.
„
„
C
D#
E
F#
G
A
C#
D
A#
B
F
G#
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
49
MIDI OVERVIEW
‘
The term MIDI is an acronym for Musical Instrument Digital Interface, an international standard for connecting
synthesizers, sequencers (MIDI recorders) and other electronic instruments so that they can exchange
performance data.
The CN32 is equipped with two MIDI jacks for exchanging data: MIDI IN and MIDI OUT. Each uses a special
cable with a DIN connector.
MIDI IN : For receiving note, program change and other data.
MIDI OUT : For sending note, program change and other data.
„
„
MIDI uses channels to exchange data back and forth between MIDI devices.There are receive (MIDI IN) and
transmit (MIDI OUT) channels. Most musical instruments or devices with MIDI functions are equipped with
both MIDI IN and OUT jacks and are capable of transmitting and receiving data via MIDI.
The receive channels are used to receive data from another MIDI device and the transmit channels are used
to transmit data to another MIDI device.
Connection to an external sequencer
„
When connected as shown in the illustration below, songs played on the CN32 can be recorded using a MIDI
recorder, with internal sounds (such as piano, harpsichord and vibraphone, etc.) controlled by the CN32’s
MULTITIMBRAL MODE function to create a multi-layer MIDI recording.
MIDI OUT
MIDI IN
MIDI OUT
MIDI IN
CN32 MIDI functions
‘
Transmit / receive keyboard
note information
By transmitting MIDI data from the CN32 digital piano (MIDI out) a MIDI-connected
keyboard can be played from the CN32 digital piano. Or alternatively, by receiving
data (MIDI IN), the CN32 digital piano can be played from another MIDI-connected
keyboard or device.
Transmit / receive channel
setting
Specify transmit/receive channels within the range of 1 to 16.
Transmit / receive Program
change (sound type) number
Transmit / receive pedal data
Transmit/receive program change data to/from a MIDI-connected musical instrument
or device.
6
Transmit/receive sustain pedal and sustain pedal data from a MIDI-connected musical
instrument or device. Sostenuto pedal data can also be transmitted.
The CN32 digital piano will respond to MIDI volume data sent from a MIDI-connected
musical instrument or device.
Receive volume data
Multi-timbral setting
The CN32 digital piano is able to receive multiple channel MIDI data from a MIDI-
connected musical instrument or device, when multi-timbral mode is turned on.
Transmit/receive front panel or menu function settings as exclusive data.
Transmit / receive exclusive
data
Transmit recorder playback
data
Songs recorded using the recorder can be played back from a MIDI-connected
musical instrument or recorded by an external sequencer via the MIDI OUT jack.
Please refer to the ‘MIDI implementation chart’ (page 63) for further information regarding the CN32 digital
piano’s MIDI functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
50
9) MIDI CHANNEL
This function is used to determine on which MIDI channel the CN32 digital piano will exchange MIDI information
with external MIDI devices and instruments or a personal computer.
The selected channel will function as both the transmit and receive channel.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the STRINGS button.
2
1
Hold down both buttons
The display will alternate between showing ‘Chn’ (Channel) and the channel number. The default channel is 1.
Step 2
ꢀ
Press the S or T VALUE buttons to change the channel number.
MIDI Channel
The channel number can be set from 1 to 16.
The CN32 digital piano’s MIDI channel setting defaults to receiving MIDI channel information from all channels, 1 to 16.
each time the power is turned on. This is called ‘omni mode on’. The CN32 digital piano will switch to ‘omni mode off’
when a specific channel is selected using the MIDI channel function, and data will only be received on that specified
channel. In order to specify channel 1 in the ‘omni mode off’ state, first select channel 2, then select channel 1.
„
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
51
10) TRANSMIT PROGRAM CHANGE ON/OFF
This function determines whether or not the CN32 digital piano will transmit program change information when
pressing the SOUND SELECT buttons.When transmit program change is turned on, pressing the SOUND SELECT
buttons will send the program change numbers as listed below.
Multi-Timbral mode
Sound Button
PIANO 1
Sound Name
Concert Grand
Off, On1
Prog #
1
On2
Bank LSB
Bank MSB
121
121
121
121
95
Prog #
1
1
1
2
1
1
1
2
5
6
5
6
18
17
17
17
20
20
21
20
7
0
1
2
Studio Grand
Mellow Grand
Modern Piano
Concert Grand 2
Studio Grand 2
Mellow Grand 2
Rock Piano
Classic E.Piano
Modern E.P.
60’s E.P.
Modern E.P. 2
Jazz Organ
Drawbar Organ
Drawbar Organ 2
Be 3
2
3
4
5
6
7
8
9
0
PIANO 2
16
17
18
1
0
0
3
1
0
0
1
2
0
7
1
6
0
3
0
0
1
8
1
0
0
53
0
0
0
0
0
95
95
121
121
121
121
121
121
121
121
95
ELECTRIC PIANO
DRAWBAR
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
CHURCH ORGAN
HARPSI & MALLETS
STRINGS
Church Organ
Diapason
121
95
95
Full Ensemble
Diapason Oct
Harpsichord
Harpsichord 2
Vibraphone
Clavi
Slow Strings
String Pad
Warm Strings
String Ensemble
Choir
95
121
121
121
121
95
7
12
8
45
49
49
49
53
54
89
100
33
34
36
33
95
95
121
121
95
121
121
121
121
121
95
CHOIR & PAD
BASS
Choir 2
New Age Pad
Atmosphere
Wood Bass
Finger Bass
Fretless Bass
W. Bass & Ride
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
52
In addition to the SOUND SELECT buttons, other button operations such as touch curve, dual, digital effects and
reverb settings can be transmitted as MIDI exclusive data when the corresponding buttons are pushed.
When set to off, no program change or other panel information will be transmitted via MIDI.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the CHOIR & PAD button.
2
1
Hold down both buttons
The display will alternate between showing ‘PGM’ (Program) and on/off status. The default is on.
Step 2
ꢀ
Press the S or T VALUE buttons to toggle transmit program change on and off.
Transmit Program Change
OFF
ON
Program change numbers will also be transmitted when multi-timbral mode is on.
When using DUAL mode, on/off information and sound type settings are transmitted as exclusive data, but program
change numbers will not be transmitted.
The CN32 digital piano’s transmit program change setting defaults to ‘ON’ each time the power is turned on.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
53
11) LOCAL CONTROL ON/OFF
This function determines whether the CN32 digital piano’s sound will be played from the piano’s keyboard (‘ON’)
or only from an external MIDI instrument (‘OFF’). Even with local control set to ‘OFF’ the piano’s keyboard will still
transmit to external MIDI devices and instruments or a personal computer.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the BASS button.
2
1
Hold down both buttons
The display will alternate between showing ‘LcL’ (Local) and on/off status. The default is on.
Step 2
ꢀ
Press the S or T VALUE buttons to toggle local control on and off.
Local Control
OFF
ON
When local control is set to ‘OFF’, there will be no sound heard when the keys are pressed.
The CN32 digital piano’s local control setting defaults to ‘ON’ each time the power is turned on.
„
„
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
54
12) MULTI-TIMBRAL MODE ON/OFF
This function allows the CN32 digital piano to receive data on more than one MIDI channel simultaneously. In this
mode, the CN32 digital piano can play different musical parts with different sounds for each part.
With multi-timbral mode enabled, an external sequencer can be used to enjoy an ensemble performance playing
multiple sound types (multi-timbral) on a single CN32 digital piano.
Multi-Timbral On (On1 and On2)
¡
This turns on the flexible 16 part multi-timbral capability. Individual MIDI channels can be turned on and off, and
assigned any internal sound. The internal sound for each MIDI channel can be changed when the program change
number for the desired sound is received from external MIDI device and instruments or a personal computer. The
CN32 digital piano’s normal program change numbers are assigned in On1 (Please see page 49 for a list of the
program change numbers), and General MIDI program change numbers are assigned in On2.
Multi-Timbral Off
¡
This turns off the multi-timbral capability. Only one MIDI channel will be active and only the sound currently selected
will be heard when a MIDI signal is received.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the EFFECTS button.
2
1
Hold down both buttons
The display will alternate between showing ‘MLt’ (Multi) and on/off status. The default is off.
Step 2
ꢀ
Press the S or T VALUE buttons to toggle multi-timbral on1, on2 and off.
Multi-timbral mode
OFF
ON1
ON2
When the multi-timbral mode is OFF and MIDI information is received, only the currently selected internal sound
will be heard.
6
When the multi timbral mode is ON, the internal sound that is heard corresponds to any program change number
that was received from external MIDI devices and instruments or a personal computer.This sound may be different
from the internal sound that is currently selected using the SOUND SELECT buttons on the panel.
When multi-timbral mode is ON, the ON/OFF setting for each individual MIDI receive channel can also be set
(See page 55).
The CN32 digital piano’s multi-timbral mode defaults to ‘OFF’ each time the power is turned on.
„
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
55
13) CHANNEL MUTE
This function determines which MIDI channels are activated to receive MIDI information when multi-timbral mode
is set to ON. Each of the 16 channels can be individually activated or deactivated.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the REVERB button.
2
1
Hold down both buttons
The display will alternate between showing ‘P01’ (Play 01) and ‘On’, indicating that the channel 1 is activated.
When multi-timbral mode is set to OFF, the ‘channel mute’ function can not be selected.
„
Step 2
ꢀ
Press the S or T VALUE buttons to toggle channel mute on and off.
To turn the other channels on and off, use the 16 left-most white keys to select a desired channel. The display will
change to indicating the selected channel. Then use the value buttons to toggle channel mute on and off.
Channel
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
Press the key
Channel1
OFF
Channel16
ON
6
When changing the channel mute settings, no sound will be heard when the keys are pressed to select the individual
„
„
channels.
When the multi-timbral mode is first turned ON after the power has been turned on, all MIDI receive channels 1-16 will
be set to ‘ON’. This is the default setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
56
14) SENDING PROGRAM CHANGE NUMBERS
This function allows the CN32 digital piano to send program change numbers beyond the 32 pre-defined numbers
transmitted by the SOUND SELECT buttons. Using this function, any number from 1 to 128 can be sent.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the SPLIT button.
2
1
Hold down both buttons
The display will alternate between showing ‘PG#’ (Program #) and a program change number.
Step 2
ꢀ
Press the S or T VALUE buttons to change the program change number.
Program change number
Step 3
ꢀ
Press both S and T VALUE buttons simultaneously to send the program change number.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
57
15) USER MEMORY
This function allows the CN32 digital piano to save the user-definable settings when the power is turned off. Once
written to the memory, the saved settings will be recalled every time the power is turned on.
The following settings can be saved.
Sound type including starting sound and primary sound for each category.
¡
¡
¡
¡
¡
¡
Effects/Reverb settings
Menu function settings
Touch
Transpose
Tempo, beat, and sound volume of the metronome
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the TEMPO button.
Memory
User
2
1
Hold down both buttons
The display will alternate between showing ‘MEM’ (Memory) and ‘uSr’ (User).
Step 2
ꢀ
Press the REC button to execute the save operation.
Write
The save operation is completed when the display shows ‘Wrt’ (Write).
Step 3
ꢀ
When finished, press any one of the SOUND SELECT buttons to exit the menu.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
58
16) FACTORY RESET
This function will appear only when the user memory function has been used.
This function resets the CN32 digital piano to the factory settings. All parameters you saved in ‘User Memory’ will
be reset to the factory preset values.
Step 1
ꢀ
Press and hold the TOUCH and TRANSPOSE buttons, then press the BEAT button.
Memory
Reset
2
1
Hold down both buttons
The display will alternate between showing ‘MEM’ (Memory) and ‘rES’ (Reset).
Step 2
ꢀ
Press the REC button to restore factory settings, and exit the menu.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
59
7. APPENDICES
CONNECTING TO OTHER DEVICES
‘
y Do not directly connect the LINE IN and LINE OUT jacks of the CN32 together with a cable.
Caution
An audio loop (oscillation sound) will occur, resulting in damage to the unit.
Amplifiers, Speakers, or similar
Computer
equipment
Audio equipment or
electronic instruments
External MIDI devices
MIDI JACKS
1
2
These jacks are used to connect external MIDI devices with the CN32 digital piano.
There are two terminals: MIDI IN and MIDI OUT.
USB JACK
This jack is used to connect with a personal computer and exchange MIDI data.
When the CN32 digital piano is connected to a computer via a commercially available USB cable, the CN32 digital
piano will be recognized as a MIDI device.
As with a regular MIDI interface, the CN32 digital piano will be able to transmit and receive MIDI messages.
There are A USB port and B USB port. Connect a computer to the A port and digital piano to the B port.
LINE OUT JACKS
3
4
These jacks provide stereo output of the piano’s sound to amplifiers, tape recorders or similar equipment.
The audio signal coming through the LINE IN jacks is also routed to these jacks. The piano’s sound is mixed with
the LINE IN signals.
7
The CN32 digital piano’s MASTER VOLUME slider can control the output level of its own sound while it does not
control the LINE IN signal.
LINE IN JACKS
These jacks are used to connect a pair of stereo outputs from other audio equipment or electronic instruments to
the piano’s speakers.
The audio signal coming through these jacks bypasses the piano’s volume control.To adjust the volume level, use
the output control of the external device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
60
ABOUT A USB DRIVER
For data exchange between a computer and digital piano via USB connection, software (USB-MIDI driver) must be
installed on the computer for proper digital piano operations.
Please read the following instructions carefully as a different USB-MIDI driver may be necessary depending on the
computer OS.
Windows XP / Me users:
‘
The standard USB-MIDI driver installed on Windows will be used. This USB-MIDI driver will be automatically
installed when the unit is connected to the computer.
To establish MIDI communications with the unit by using an application, select “USB audio device” to define the
unit as a MIDI device.
Windows Vista / 2000 / 98SE users:
‘
You need to install the specified, special USB-MIDI driver. Download the special USB driver from the KAWAI site
as shown below, and install it on the computer.
Read the instruction manual thoroughly before connecting the unit to the computer, and make sure to install the
driver.
If you connect the unit to the computer without installing the driver, the USB-MIDI driver may not operate properly.
If this occurs, use the driver update function of the OS to install the appropriate USB-MIDI driver, or delete the
driver by using the driver delete function and then install the driver again.
To establish MIDI communications with the unit by using an application, select “KAWAI USB MIDI IN” and “KAWAI
USB MIDI OUT” to define the unit as a MIDI device.
Macintosh OS X users:
‘
‘
When the unit is used with Macintosh OS X, the unit will be recognized as a MIDI device automatically; therefore,
no special driver is needed.
To establish MIDI communications with the unit by using an application, select “USB-MIDI” to define the unit as
a MIDI device.
Users of Macintosh OS9 or earlier:
The unit does not support Macintosh OS9 or earlier. Please establish a MIDI connection by using a commercially
available MIDI interface.
NOTES ON USB
x When MIDI and USB are connected simultaneously, USB will be prioritized.
x When connecting a digital piano to a computer by using a USB cable, first connect the cable and then turn on the
power of the digital piano.
x When a digital piano is connected to a computer by using a USB cable, it may take some time before communications
start.
x When a digital piano and a computer are connected via a hub, and the operation is not stable, connect the digital
piano directly to the USB port of the computer.
x Operations of a computer or a digital piano may become unstable if the power of the piano is turned on or off, or if
the USB cable is pulled out or inserted during:
* Driver installation
* Computer power-up
* MIDI application operations
* Communication with the computer
* Standby in power-saving mode
USB may not operate properly depending on the settings of your computer. Read the computer instruction manual
thoroughly before use and ensure that appropriate settings are made.
Ä
7
“MIDI” is a registered trademark of the Association of Manufacturers of Electronic Instruments (AMEI).
Windows is a registered trademark of Microsoft Corporation.
Macintosh is a registered trademark of Apple Computer. Inc.
Other company names and product names mentioned referenced herein may be registered trademarks or trademarks
of respective owners.
Ä
Ä
Ä
Ä
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
61
ASSEMBLY INSTRUCTIONS
‘
y Ensure that this instruction manual is read thoroughly before attempting to assemble the CN32
Caution
digital piano, and that two or more people work on assembly.
y It may be necessary to tilt the unit by 90 degrees while assembling the CN32 digital piano.
During this time, ensure that hands are not caught in the piano, keyboard lid, or score stand,
and that the piano is not dropped on an individual’s feet.
PARTS PROVIDED
„
Before attempting to assemble the CN32 digital piano unit, ensure that all parts are included. A Phillips-head
screwdriver will also be required to assemble the unit (not included).
(A) Piano (x 1)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(B) Pedal board (x 1)
I
I
I
Adjuster bolt
4 x 16 4 x20 4 x30 M6 x 25 Cord clamp Headphone hook and screws
(C) End panel (x 1 each for left and right)
(D) Back panel (x 1)
(E) Adjuster bolt (x 1)
Iꢀ
(F) Screw: 4 x 16 (x 4) (Silver)
Iꢀ
(G) Screw: 4 x 20 (x 4)
Screw
(x 2)
Iꢀ
(H) Screw: 4 x 30 (x 4)
(I) Screw: M6 x 25 (x 4)
(J) Cord clamp (x 2)
(K) Headphone hook and screws (x 1 set)
(L) Power cord (x 1)
ASSEMBLY SEQUENCE
„
1
y Be careful not to scratch or damage the floor,
Caution
piano, or stand at the time of assembly.
1. Screw the adjuster bolt (E) into the threaded screw hole
provided on the pedal.
(E)
2. From the side of the screw that is already on the backside of
the pedal board (B), slide and insert the bracket of the end
panel (C).
(F)
2 y 3
3. While pressing the end panel (C) against the pedal board (B),
tighten the already-provided screws, one each on the left and
right sides, and then tighten two screws (F) on each side.
Already-provided screw
(F)
4. Untie and pull out the pedal cable.
(C)
5. Set the back panel (D) and tighten the screws (G) (H) into
the prepared holes. Loosely tighten the screws with the *
symbol.
(B)
4 y 5
(H)*
7
(D)
(G)
(H)*
(G)
(H)*
(H)*
(G)
(G)
(Untie this twist tie from the cable)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
62
6. Place the stand so that the backside of the stand assembly
rests against a wall, and then slowly and carefully insert the
piano. Ensure that more than two people work on the assembly.
If attempting to insert the piano without resting the stand against
a wall, support the back of the stand using your foot or leg to
prevent the stand from sliding backwards.
6 y 7 y 8
(A)
(K)
(I)
(I)
y Ensure that the piano is not dropped on an
Caution
individual’s feet, and that fingers, hands and
feet are not caught in the piano.
7. Press the end panel (C) of the stand to the piano (A), and then
fasten the piano (A) to the stand with four screws (I).
9 y 10
Protrusion
y Ensure that the piano and the stand are
Caution
(J)
(J)
securely fastened together with the screws,
preventing the possibility of the piano
falling.
(H)*
8. Fix the headphone hook and screws (K).
*If the headphone hook will not be required, it can be kept with
the instruction manual.
11
9. Tightly fasten the loosely fastened screws (H) with the * symbol.
10.Insert the connector of the pedal cord into the receptacle,
and fix the cord with the cord clamp (J) (make sure that the
protrusion of the connector is facing the correct direction, and
insert the connector straight).
11.Turn the adjustor bolt (E) at the bottom of the pedal stand until
the bolt firmly touches the floor and supports the pedal board.
(E)
y Ensure that the adjuster bolt (E) firmly
Caution
touches the floor, supporting the pedal
board and preventing damage.
12
When moving the piano, remove the
adjustor bold (E) and readjust after moving
has been completed.
(L)
12.Insert the power cord (L) into the piano.
13.Remove the protective film from the display.
Assembly is now complete.
13
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
63
SPECIFICATIONS
‘
„ Keyboard
88 Weighted Keyboard with Advanced Hammer Action IV-F
„ Polyphony
Max. 96 notes
„ Number of Sound
„ Sound Categories
„ Effects
36
Piano 1, Piano 2, Electric Piano, Drawbar, Church Organ, Harpsi & Mallets, Strings, Choir & Pad, Bass
Reverb (Room1/2, Stage, Hall1/2), Chorus, Tremolo, Delay (1/2/3), Rotary (1/2)
„ Temperaments
Equal (Piano Only), Mersenne pure (Major), Mersenne pure (minor), Pythagorea, Meantone,
Werckmeister III, Kirnberger III, Equal (flat), Equal
„ Other Features
Demo (30 Preset Songs), Concert Magic (88 Preset Songs), Volume, Dual, Split, Four Hands, Balance
Slider, Transpose, Tune, Lower Octave Shift, Lower Pedal On/Off, Touch Curve (Light 1, Light 2,
Normal, Heavy 1, Heavy 2, Off), MIDI (16 part multi-timbral capability), Damper Hold, Damper Effect,
String Resonance, User Memory, Factory Reset
„ Lesson Function
Right/left part balance adjustable, tempo adjustable. Please refer to the separate ‘Concert Magic Song
List / Lesson Song List’ booklet for a complete listing of available lesson songs.
„ Recorder
2 tracks, 3 songs - total memory capacity approximately 15,000 notes.
„ Metronome
Time signatures: 1/4, 2/4, 3/4, 4/4, 5/4, 3/8, 6/8
Tempo: 10-400 BPM
„ Pedals
Damper (half-pedalling supported), Soft, Sostenuto
„ Jacks
Headphones x 2, LINE IN (L, R), LINE OUT (L/MONO, R), MIDI (IN, OUT), USB to Host
„ Output Power
„ Speakers
„ Key Cover
„ Power Consumption
„ Dimensions
„ Weight
16 W x 2
16 cm x 2
Sliding type
50 W
1380 (W) x 470 (D) x 880 (H) mm (with music rack flattened)
54 kg
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
64
MIDI EXCLUSIVE DATA FORMAT
‘
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th byte
9th byte
9th byte
10th byte
1
2
3
4
5
6
7
8
9
10
1
F0 ..........................Start code
2
3
4
5
6
7
8
9
40...........................KAWAI’s ID number
00 - 0F ...................MIDI channel
10, 30.....................Function code (30 when setting MULTI TIMBRE ON/OFF)
04...........................Indicates that the instrument is Electronic Piano
02...........................Indicates that the piano is one of ‘CA’ or ‘CN’ series
data 1
data 2.....................(See the table below.)
data 3
10 F7 ..........................End code
data 1
00
data 2
00
data 3
----------
----------
----------
----------
Function
Multi Timbre Off
Multi Timbre On 1
Multi Timbre On 2
00
01
00
02
0D
00-07
00: Effect Off, 01: Chorus, 02: Delay 1, 03: Delay 2, 04: Delay 3,
05: Tremolo, 06: Rotary 1, 07: Rotary 2
0E
00-03, 06, 07
----------
00: Reverb Off, 01: Room 2, 02: Stage, 03: Hall 1, 06: Room 1,
07: Hall 2
14
16
17
18
19
20
21
22
25
26
00-7F
1F-60
00, 7F
00-05
00-03
00-23
00-23
00-23
00-08
00, 7F
----------
----------
----------
----------
----------
00-23
00-23
00-23
00-0B
00-0F
Dual/Split balance
Tune, 40: 440 Hz
00: Program Change Off, 7F: Program Change On
00: Light 1, 01: Normal, 02: Heavy 1, 03: Off, 04: Light 2, 05: Heavy 2
Lower Octave Shift
Dual, data 2: Main sound, data 3: Layer sound
Split, data 2: Upper sound, data 3: Lower sound
Four Hands, data 2: Right sound, data 3: Left sound
data 2: Temperament, data 3: Key
Multi Timbre, data 2: 00 (On), 7F (Off), data 3: channel
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
65
MIDI IMPLEMENTATION CHART
‘
KAWAI DIGITATL PIANO
MODEL : CN32
Date : November 2008
Version : 1. 0
Function
Transmit
Receive
Remarks
Default
Changes
1
1
Basic channel
1 - 16
1 - 16
* The default for the
Default
Messages
Altered
3
°
1
1, 3*
°
OMNI mode is ON.
Specifying MIDI
channels automatically
turns it OFF.
Mode
ÄÄÄÄÄÄÄÄÄ
9 - 120**
ÄÄÄÄÄÄÄÄÄ
0 - 127
0 - 127
** The value depends on
the Transpose setting.
Note number
Velocity
True voice
Note ON
Note OFF
{ 9nH v=1-127
° 9nH v=0
{
°
Key’s
Channel’s
°
°
°
°
After touch
Pitch bend
°
°
0,32
7
11
64
66
67
{
{
{
{
{
{
{
Bank select
Volume
Expression pedal
Sustain pedal
Sostenuto pedal
Soft pedal
°
°
Control change
{ (Right pedal)
{ (Center pedal)
{ (Left pedal)
*** See the Program
Change Number
{ 0 - 127
ÄÄÄÄÄÄÄÄÄ
Program change
System exclusive
Common
{***
True #
Mapping in page 51.
{
{
On/Off Selectable
Song Position
Song Select
Tune
°
°
°
°
°
°
System
Real time
Clock
Commands
°
°
°
°
Local On/Off
All notes Off
Active Sense
Reset
°
°
{
°
{
{ (123 - 127)
{
°
Aux
7
Notes
Mode 1: omni mode On, Poly, Mode 2: omni mode On, Mono
Mode 3: omni mode Off, Poly, Mode 4: omni mode Off, Mono
{: Yes
°: No
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CN32 Owner’s Manual
KPSZ-0275 : 816456
OW1020E-S0812
Version.1
Printed in Indonesia
Copyright © 2008 KAWAI Musical Instruments Mfg. Co.,Ltd. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|