CaptivG3
Cyclonic
Bagless Vacuum
Instruction Booklet
KBV220/250/280
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
1
23/08/11 10:12 AM
Contents
Kambrook Recommends
Safety First
p4
p6
Your CaptivG3 Cyclonic
Bagless Vacuum
Operating Instructions
Care and Maintenance
Troubleshooting
p7
p9
p13
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
3
23/08/11 10:12 AM
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK
CAPTIVG3 CYClONIC BAGlESS VACUUM
• Carefully read all instructions before operating
the Kambrook CaptivG3 Cyclonic Bagless
Vacuum for the first time and save for future
reference.
• Do not use or store outdoors.
• Fully extend the cord (to the yellow tape
mark) whenever the vacuum cleaner is in use.
Please ensure that the cord is not extended
past the red tape mark.
• To protect against electric shock, do not
immerse the vacuum, cord or plug in water or
any other liquid.
• Do not leave the appliance unattended when
in use.
• Ensure that the power source to be used is
the same as the voltage requirements of the
product.
• Regularly inspect the supply cord, plug and
actual appliance for any damage.
If damage is found in any way, immediately
cease use of the vacuum and return the entire
vacuum to your nearest authorised Kambrook
service centre for examination, replacement
or repair.
• Always switch vacuum cleaner to off, then
switch off at the power outlet, and then
unplug the vacuum cleaner when not in use
and prior to cleaning the dust container or
filters.
• Never use the vacuum cleaner without a dust
container and motor protection filter in place.
• Never use the vacuum cleaner to vacuum hot
ashes, broken glass, sharp objects or liquids.
• Never use in the presence of explosive liquids
or vapours.
• Never vacuum up inflammable or poisonous
liquids such as petrol, copier toner or other
volatile substances. Never vacuum up acids,
asbestos or asbestos dust.
• Do not leave the vacuum cleaner unattended
when in use.Young children should be
supervised to ensure that they do not play with
the vacuum cleaner.
• Close supervision is required at all times when
operating the vacuum cleaner near children.
• This vacuum cleaner is suitable for domestic
use only. Do not use this vacuum cleaner for
anything other than its intended use.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
4
23/08/11 10:12 AM
Important Safeguards For All
Electrical Appliances
• Carefully read all instructions before operating
the appliance and save for future reference.
• This appliance is for household use only.
Do not use this appliance for other than its
intended use. Do not use in moving vehicles or
boats. Do not use outdoors.
• Remove and safely discard all packaging
material and promotional labels before using
the appliance for the first time.
Misuse may cause injury.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice
• Fully unwind the power cord before use.
• Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid, unless it
is recommended in the cleaning instructions.
• Always turn the appliance to the OFF position,
switch off at the power outlet and unplug at
the power outlet when the appliance is not in
use.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance, by a person
responsible for their safety.
• Before cleaning, always turn the appliance
to the OFF position, switch off at the power
outlet, unplug at the power outlet and remove
the power cord, if detachable, from the
appliance and allow all parts to cool.
• Children should be supervised to ensure that
they do not play with the appliance.
• Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in anyway.
Return the entire appliance to the nearest
authorised Kambrook Service Centre for
examination and/or repair.
• Position the appliance at a minimum distance
of 20cm away from walls, curtains and other
heat or steam sensitive materials and provide
adequate space above and on all sides for air
circulation.
• Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
5
23/08/11 10:12 AM
Your CaptivG3 Cyclonic
Bagless Vacuum
1. Bagless convenience, for easy
removal of dirt and dust with no
need for replacement bags
8. Cyclonic cone helps separate
particles from the air before
filtering begins
2. Variable power control
9. Two washable HEPA
filters included
3. 1500 watt motor for
superior suction, fast
10. Auto cord rewind
11. Convenient carry handle
12. Cord length 5m
13. Small brush
14. Upholstery tool
15. Crevice tool
and effective cleaning
4. Dust level indicator
5. Quality multi-terrain floor tool
ideal for carpet and hard floors
6. Hard floor tool for improved pick
up on hard floors (KBV280 only)
7. Telescopic chrome steel wand is
easily extendable or retractable
for varying height requirements
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
6
23/08/11 10:12 AM
Operating Instructions
Fully extend the power cord by pulling
the power plug out from the rear of
the vacuum, until the yellow tape on
the cord is showing.
Before First Use
Remove any promotional material
from the vacuum cleaner.
When unpacking the vacuum cleaner
check to see you have received all
the required components, such as the
hose and other accessories before
discarding the packaging.
NOTE: Ensure that you do not
over extend the power cord
– do not extend past the red
warning tape on the cord.
To Operate the
Vacuum Cleaner
Locate the crush proof hose and push
the connection point into the hose
inlet connection on the front side of
the vacuum, until a “click” sound
is heard.
Connect the wide end of the metal
wand to the hose end, and push
together firmly.
Plug into a 230/240V power point and
switch the power on at the power
point.
To commence vacuuming, push down
on the on/off button on the top of
the vacuum cleaner.
When vacuuming is complete, push
down on the ‘on/off’ button to switch
off.Turn the power off at the outlet
and then remove the power cord
from the power outlet.When removing
the plug from the power outlet, grasp
the plug not the cord.
To retract the cord push down on the
‘cord rewind’ button
vacuum cleaner.
on top of the
IMPORTANT: Hold the
plug end and guide the
cord into the vacuum
during retraction to
prevent it from striking
you or the vacuum.
Fig. 1
Fit the floor tool to the narrow end of
the wand and push together firmly.
CAUTION: Always
ensure that the dust
container and the
motor protection filter
are correctly fitted.
Never operate without
the dust container or
filters in place.
Fig. 2
7
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
7
23/08/11 10:12 AM
Operating Instructions
continued
Set the variable speed control
Variable Power Control
between minimum and medium
power when using the tool
accessories.
The power booster lever on the
vacuum can be used for variable
power control. Slide the lever toward
the MAX marking for vacuuming hard
floor and carpet surfaces. Slide the
lever toward the MIN marking when
using the crevice, upholstery and
brush tools.
Hard Floor Tool (KBV280
ONLY)
Fig. 5
Fig. 3
The hard floor tool is ideal for
vacuuming hard floors, with improved
pick-up.
Crevice and Brush
Tool Accessories
Simply fit the hard floor tool to the
narrow end of the wand and push
together firmly.
Fig. 4
Fig. 6
The crevice tool is ideal for vacuuming
hard to reach places such as the
edges along skirting boards.
The brush and upholstery tools can
be used to vacuum delicate surfaces
and areas such as shelves and
venetian blinds.
Turn off the vacuum cleaner when
changing any tools. Follow the ‘TO
OPERATE THE VACUUM CLEANER’
instructions to commence vacuuming.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
8
23/08/11 10:12 AM
Care and Maintenance
Check all filters and replace them
regularly. It is recommended to clean
the filters after every use. For normal
household vacuuming the filters
should be replaced at least twice a
year.
If you encounter reduced vacuum
cleaner performance, check:
• Dust capacity in dust container
Fig. 8
• All filters, including dust, motor and
exhaust.Any clogging in the filters
will reduce the efficiency of your
vacuum cleaner
To clean the outside of the unit, wipe
the exterior with a soft, damp cloth.
Never use an abrasive cleaner.
To remove the dust container, ensure
the vacuum is down on its wheels;
remove the dust container by pressing
down on the button on top of the dust
container. Once released carefully lift
the container upwards.
Emptying the Dust Container
Fig. 9
Fig. 7
Always switch the vacuum off, then
switch off at the power outlet and
unplug prior to replacing filters or
emptying the dust container.
NOTE: Dependant upon
the amount and type of dirt
collected in the dust container, it
may be necessary to agitate the
dirt inside the dust container for
easier dispensing.
For optimum use, the dust container
should be emptied after every
use.When the dust container
reaches the capacity mark ‘MAX’,
it is essential to thoroughly clean
both the dust container and filters.
IMPORTANT: Do not use
the unit without a dust
container in place.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
9
23/08/11 10:12 AM
Care and Maintenance
continued
Cleaning and
Replacing Filters
To assist you with the regular care of
your vacuum, a second HEPA filter is
supplied for convenient use, ideal for
when a dirty filter is being cleaned.
Dirty and clogged filters may result in
reduced suction performance.
Fig. 10
NOTE: It is recommended that
filters are cleaned after every
3. Shake and tap the HEPA filter
until all the fine dust particles are
removed.After approximately 6
months the HEPA filter should be
replaced.This period is dependant
upon the frequency of use and
type of dirt being subjected to the
vacuum.The HEPA filter can also
be hand washed in warm water.
use and replaced regularly to
r
ensure maximum efficiency
from your vacuum.
If filters are left uncleaned, it may
result in a reduction of suction power.
Should this occur, the following
procedure should be followed every
couple of months.
Procedure to Replace Filters
Always switch the vacuum off, then
switch off at the power outlet and
unplug prior to cleaning or replacing
the filters. Before replacing the filters
ensure all dirt and dust is first
emptied from the dust container.
Refer to the ‘EMPTYING THE DUST
CONTAINER’ section.
Fig. 11
1. Remove the dust container
from the vacuum by pressing
down on the button on top of
the dust container. Once
released, carefully lift the
container upwards.
NOTE: Do not use any detergents
or boiling water to wash the
filter, do not wash the filter in a
dishwasher or washing machine.
2. To remove the HEPA filter from
the back (flat side) of the dust
container, press the tab and pull
out the HEPA filter, followed by the
foam filter.
It is advised to let the filter dry
completely for at least a minimum of
24 hours before use.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd 10
23/08/11 10:12 AM
5. Simply place the foam filter into
the back of the HEPA filter and
then click the filter assembly into
the back of the dust container.
NOTE: Do not dry in a tumble
dryer, microwave, oven or near
a naked flame. The filter and
filter case must be completely
dry before replacing into
the vacuum. Failure to allow
the filter to completely dry
may result in damage to the
vacuum motor.
NOTE: A second HEPA filter is
supplied for convenience,
ideal for when a used filter is
being cleaned.
Fig. 13
6. To remove and clean the CaptivG3
cone from inside the dust container,
firstly ensure the dust container
has been emptied. Follow the
‘EMPTYING THE DUST CONTAINER’
instructions.
Fig. 12
Fig. 14
NOTE: When replacing the dust
container HEPA filter, all three
components (HEPA filter, foam
filter and plastic casing) need
to be replaced.
Press the ‘PUSH’ button located
beneath the hose inlet
connection on the front of the
dust container.The bottom of the
container will release. Grip the
two pockets at the base of the
cone with two fingers, twist anti-
clockwise to ‘OPEN’ and pull to
remove the cone.
4. To place the filter back in the dust
container, ensure that the filter is
completely dry before use. Close
the bottom of the container.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd 11
23/08/11 10:12 AM
Care and Maintenance
continued
Shake and tap the cone until
all the fine dust particles are
removed.The cone can also be
hand washed.Allow the cone
to completely air dry before re-
assembling.
To replace the cone into the dust
container, grip the two pockets
at the base of the cone with two
fingers, slide the cone into the
allocated bracket inside the dust
container and twist clockwise to
‘CLOSE’ until resistance is felt.
IMPORTANT: Dirty
and clogged filters
may result in reduced
suction performance. It
is recommended that
filters are cleaned after
every use and replaced
regularly to ensure
maximum efficiency from
your vacuum.
Exhaust filter
The exhaust filter should be cleaned
every six months. Simply unclip
the grill on the top of the vacuum
cleaner towards the rear, shake and
tap the filter to remove any dust
accumulated.Then relocate the filter
and reattach the grill.
Fig. 15
7. Place the dust container back in
NOTE: Always switch the
the vacuum cleaner for next use.
vacuum off, then switch off at
the power outlet and unplug
the appliance prior to cleaning
or replacing either filter.
NOTE: If the Canister does not
easily fit in position, the filter
casing may be in the wrong
orientation. Do not force the
dust canister back into position.
To clean the outside of the
unit, wipe the exterior with a
soft, damp cloth. Never use an
abrasive cleaner.
IMPORTANT: Check and
replace both the motor
protection and HEPA
filters approximately
twice a year or when
visibly clogged.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd 12
23/08/11 10:12 AM
Troubleshooting
Problem
Possible Causes
What To Do
Vacuum cleaner is not
working
• The unit may not be
plugged into power
outlet
• Ensure the power plug is
securely plugged
Vacuum cleaner is not
picking up dirt
• Dust container is full
• Filter is clogged
• Dust container is not
fitted correctly
• Empty and clean the
dust container
• Refer to ‘Cleaning and
Replacing Filters’, page 10
• Check dust container
replacement
Dust escaping
from vacuum
• Dust container is not
fitted correctly
• Check dust container
installation
• Hose is not fitted
correctly
• Dust container is full
• Check hose installation
• Empty and clean the
dust container
Spare Parts
To order spare parts for your
Kambrook CaptivG3 Cyclonic Bagless
Vacuum please contact Customer
Service on:
1300 139 798 (Australia)
and 0800 273 845 (New Zealand)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd 13
23/08/11 10:12 AM
Notes
14
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd 14
23/08/11 10:12 AM
Notes
15
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd 15
23/08/11 10:12 AM
Kambrook - Australia
Kambrook - New Zealand
Building 2, Port Air Industrial Estate
1A Hale Street
Private Bag 94411
Botany, Manukau
Botany NSW 2019
Auckland 2163
Australia
New Zealand
Customer Service Line 1300 139 798
Customer Service Fax 1800 621 337
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue B11
Download from Www.Somanuals.com. All Manuals Search And Download.
KBV250-220-280_IB_B11.indd
1
23/08/11 10:12 AM
|