AM/FM/All Hazards Weather Alert Receiver
with Dual Alarm Clock
JX-M133
INSTRUCTION MANUAL
Please read this manual carefully before operating
and save it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
INTRODUCTION
Thank you for choosing the JX-M133 AM/FM/WB band radio. Before operating the
unit, please read these instructions thoroughly and retain them for future reference.
The JX-M133 is designed to receive National Weather Service (NWS) broadcasts, by
the Department of Commerce’s National Oceanic and Aerospace Administration
(NOAA) which provides information about weather conditions, forecasts and hazard
information 24 hours a day as a public service.
JX-M133 receives all seven NOAA channels; it has an automatic alert system; in the
event of a special warning broadcast, the receiver will automatically activate along
with a loud tone; a flashing LED indicator; and an “alert” message on the LCD.
This unit also has an “S.A.M.E Digital Weather/Hazard Alert” feature, providing you
with constant monitoring of your localized NWS broadcast. It allows you to receive
only messages for the areas concerning you.
For up-to-date information on NOAA and weather frequencies used in your area,
To get weather band channel and S.A.M.E code for your area,
call 1-888-697-7263, or visit
AM / FM / Weather Band Radio
•
•
•
•
•
•
•
All hazards weather alert system
Programmable presets for 30 radio stations
SAME decode and alert message display
Store up to 10 alert messages
LED warning indicator
Dual alarm clock with date display
Wake to AM/FM radio or buzzer
What’s included
•
•
•
All Hazards Weather Receiver with AM/FM/WB Radio
AC Adapter
QSG (Quick Start Guide)
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
GETTING STARTED
Location of Controls on the Main Unit
1
10
11
2
3
1
12
13
4
5
6
7
MEMORY
14
15
8
16
9
1. Telescoping antenna
2. EXT. ALERT jack
3. DC jack
6. ALERT ON/OFF button 12. Speaker
7. RADIO AM/FM button
13. SNOOZE/DIMMER
button
8. VOLUME -/+ button
4. WEATHER/HAZZARD/ 9. OFF/AL1/AL2/AL1+2
14. MENU/MEMORY
button
15. SELECT button
ON/OFF button
Selector Switch
10. HEADPHONE jack
11. ANT. jack
5. POWER button
16. < >
buttons
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Location of Indications on the LCD Screen
1
2
3
4
5
6
7
8
9 10
1. PM/AM/FM indicator
6. Selectable alert indicator
2. ALARM 1 status indicator
7. NOAA indicator
3. CLOCK/FREQUENCY
8. Setting/Hazard/Info/Date
display
display
4. ALERT mode display
9. S.A.M.E. county indicator
5. ALARM 2 status indicator
10. Low battery indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
GETTING STARTED
Using an AC Adapter to Supply the Power to the Unit
Before connecting the AC adapter (included), make sure that the input voltage of the
AC adapter corresponds to your local AC outlet voltage. It is recommended to use an
AC adapter, which outputs DC 12V / 250mA
, for this unit.
1. Connect the AC adapter (included) plug to the DC Jack of the unit.
2. Connect the other end of the AC adapter to the wall outlet.
Important Note: To avoid the electric shock or fire, do not use the AC adapter where
lots of water particles exist in the air. Use the AC adapter with caution.
Installing the backup batteries
This unit operates on 4 X “AA” batteries (not included) for backup. Please note that
batteries are important because they provide emergency power for the receiver in if
the AC power fails.
1. Open the Battery Compartment.
2. Insert 4 "AA" size batteries into the Battery Compartment, making sure that the
batteries are installed with the proper polarity (+/-) are maintained.
Important Note: Please protect the environment. Dispose of old batteries properly
according to local regulations.
Notes on battery use:
•
•
•
•
To save battery power, please always use AC adaptor for receiver power supply.
Load new batteries with their polarities (+/-) aligned correctly.
Do not apply heat to batteries, or internal short circuit may occur.
If this unit is not to be used for a long period of time, remove all batteries and
store them in a cool and dry place.
•
•
Remove spent batteries immediately and dispose of them.
Do not use old and new batteries together. Also never use an alkaline battery
with a magnesium battery.
•
Backup battery time is 54 hours
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Basic Operation
1. Extend the antenna to its full length.
2. Program the Weather Channel for Your Desired Area
a)
b)
c)
Turn the radio off with the POWER button on top of the radio.
Press the MENU button.
Press the UP " " or DOWN " " button until “WEATHER—CH1”
displays on the LCD screen.
d)
e)
Press the SELECT button.
Press the UP " " or DOWN " " button to manually scroll through the
weather channels until you hear the strongest weather broadcast.
Press the SELECT button to save this channel.
f)
3. Press the WEATHER/HAZARD ON/OFF button to listen to the weather
radio. You are now able to receive weather alerts for your area and surrounding
areas.
Seven channel weather band (MHz)
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
162.400
162.425
162.450
162.475
162.500
162.525
162.550
Setting the Time
1. Turn off the radio by pressing POWER button on top of the radio.
2. Press the MENU button.
3. Press the UP " " or DOWN “ " button until “SET UP—TIME” is displayed.
4. Press the SELECT button, hour setting will begin to flash.
5. Press the UP " " or DOWN " " buttons to adjust the hour setting.
Note: The AM / PM setting cannot be manually changed; it changes
automatically as you scroll through the hours.
6. Press the RIGHT “>” arrow to adjust minutes and save your hour setting.
7. Press the UP " " or DOWN " " buttons to adjust the minute setting.
8. Press the SELECT button to store the time setting.
9. Press the MENU button to return to the main menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Setting the Date
1. Turn off the radio by pressing POWER button on top of the radio.
2. Press the MENU button.
3. Press the UP " " or DOWN “ " button until “SET UP—DATE” is displayed.
4. Press the SELECT button.
5. Press the UP " " or DOWN " " buttons to adjust the month.
6. Press the RIGHT “>” button to select the day.
7. Press the UP " " or DOWN " " buttons to adjust the day.
8. Press the RIGHT “>” button to select the year.
9. Press the UP " " or DOWN " " buttons to adjust the year.
10. Press the SELECT button to store MONTH/DAY/YEAR.
11. Press the MENU button to return to the main menu.
Setting the ALARM 1 Time
1. Turn off the radio by pressing POWER button on top of the radio.
2. Press the MENU button.
3. Press the UP " " or DOWN “ " button until “SET UP—ALARM 1” is
displayed.
4. Press the SELECT button. The alarm hour setting will begin to flash.
5. Press the UP " " or DOWN " " buttons to adjust the alarm hour setting.
Note: the AM/ PM setting cannot be manually changed; it changes
automatically as you scroll through the hours.
6. Press the RIGHT “>” button to choose setting alarm minutes.
7. Press the UP " " or DOWN " " buttons to adjust the alarm minute setting.
8. Press the SELECT button to confirm the alarm time setting and enter to wake
mode setting.
9. Press the LEFT “<” or RIGHT “>” buttons to select “ ” (Buzz) or “
”
(Radio) wake mode, press the SELECT button to confirm.
Setting the ALARM 2 Time
1. Turn off the radio by pressing POWER button on top of the radio.
2. Press the MENU button.
3. Press the UP " " or DOWN “ " button until “SET UP—ALARM 2” is
displayed.
4. Follow the instructions for “Setting the ALARM 1 Time” above.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Activating the Alarm
1. To activate the alarm, set the AL1/AL2/AL1+2 switch on side of the radio to
your desired position. The clock face icon will appear.
2. When the alarm sounds, press the SNOOZE button on the top of the radio.
The alarm will sound again in seven (7) minutes.
3. Press the POWER button to turn off the alarm temporarily, alarm will be
activated at next day same time.
4. To turn the alarm off completely, set the AL1/AL2/AL1+2 switch on side of the
radio to “OFF” position.
Radio Operation
1. To turn on the radio by press the POWER button.
2. Adjust the desired volume level by press the VOLUME +/- button, the volume
level will show on the right corner of the display.
3. Select the preferred band (AM/FM) by pressing the RADIO AM/FM button.
4. Tune manually to a radio station. The LCD will display the frequency of the
received station.
•
•
Manual tuning: Press the LEFT “<” or RIGHT “>” buttons.
Auto scan: Press and hold the LEFT “<” or RIGHT “>” buttons for two (2)
seconds.
5. Adjust the antenna to get optimal effect.
6. To turn off the radio by press the POWER button again.
Radio Presetting
1. Turn on the radio and tune a station you want to store.
2. Press the MENU button, the “MEMORY 01” will display on the LCD screen.
3. Press the UP " " or DOWN “ " button to select a station to be stored.
4. Press the SELECT button to store current frequency in unit memory.
5. Repeat above 2-4 steps to store other frequencies.
Note: Total 20 FM frequencies and 10 AM frequencies can be stored.
Using Preset Stations
1. Turn on the radio and change the AM of FM band pressing the RADIO AM/FM
button.
2. Press the UP " " or DOWN “ " button to select the preset stations.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Obtaining Weather Channel/County Codes from NOAA
In order to receive alerts, JX-M133 must be set to the correct weather channel and
county code(s) (FIPS code). To get this information for your area, call the NWS toll
free number: 1-888-NWS-SAME (1-888-697-7263), or visit the website:
In the above website, search the state and county for your area and then write down
the channel (frequency) and county code(s). You may want to obtain the codes for
other areas through which you travel. JX-M133 can store up to 23 county codes
(FIPS code) under the “Programming Multiple S.A.M.E County Codes” section on the
next page.
Programming a Single S.A.M.E. County Code
1. Turn off the radio by pressing the POWER button on top of the radio.
2. Press the MENU button to open menu options.
3. Press the UP " " or DOWN " " buttons to scroll through menu options until
“County Code” is displayed.
4. Press the SELECT button followed by the UP " " or DOWN " " buttons to
scroll through ”SINGL COUNTY”, “MULTI COUNTY” or “ALL COUNTY”.
5. Choose “SINGL COUNTY”, followed by the SELECT button. ”Code 01” will be
displayed and the first digit space will start blinking.
6. Use the UP " " or DOWN “ ” button to scroll through the digits 0-9. Input
the first digit and press the RIGHT “>” button to save that selection and move
to the next digit.
7. Continue programming all 6 digits this way. When finished, press the SELECT
button and your entered code will be saved.
Note: The single county code you set will automatically become the “CODE 01” of
multiple county codes.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Programming Multiple S.A.M.E. County Codes
1. Press the MENU button to open menu options.
2. Press the UP " " or DOWN " " buttons to scroll through menu options until
“County Code” is displayed.
3. Press the SELECT button and then the UP " " or DOWN " " buttons to
scroll through “SINGL COUNTY”, “MULTI COUNTY” or “ALL COUNTY”.
4. Choose “MULTI COUNTY”, and press the SELECT button.
5. Use the UP " " or DOWN " " buttons to scroll through code locations 1-23.
(You are able to program up to 23 different county codes into your radio).
6. Choose the location you want and press the SELECT button. The first digit
space will start blinking.
7. Use the UP " " or DOWN " " buttons to scroll through the digits 0-9. Input
the first digit and press the RIGHT “>” button to save that selection and move
to the next digit.
8. Continue programming all 6 digits this way. When finished, press the SELECT
button and your entered code will be saved.
9. To program your next code, press the UP " " button to go to the next code
location.
10. When you have entered all your desired codes, press the MENU button to
store your settings.
Deleting the County Code
1. Press the MENU button and program the county code following above
“Programming a Single S.A.M.E. County code” and “Programming Multiple
S.A.M.E county code” sections.
2. Set all 6 digits to “-- -- -- -- -- --“ (blank).
Choosing an Alert (Voice or Siren)
1. Press the MENU button to open menu options.
2. Press UP " " or DOWN " " buttons until “Alert Mode” is displayed on the
screen.
3. Press the SELECT button and “VOICE” will start blinking on the screen.
4. To choose the voice alert, press the SELECT button.
5. Once “VOICE” is chosen, the alert will sound for eight (8) seconds followed by 2
to 5 minutes of weather broadcast.
6. To choose a siren alert, press the UP " " or DOWN " " buttons until
“SIREN” blinks on the screen press the SELECT button to save this setting.
7. Once “SIREN” is chosen, alert tones will sound for 2 to 5 minutes or until the
ALERT ON / OFF button is pressed. While alert tone is sounding, press the
WEATHER/HAZARD ON/OFF button to listen the voice broadcasting.
8. During voice or siren alert, press the ALERT ON/OFF button to stop the alert.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
To Turn the Alert ON / OFF
1. To turn the alert on and off, press and hold the ALERT ON / OFF button for
five (5) seconds in power off state until “ALERT ON” blinks on the screen.
2. Press the UP " " or DOWN " " buttons to switch between “ALERTON” and
“ALERTOFF”.
3. Press the SELECT button to save your selection.
Setting the Alert Volume
1. To set the alert volume, press the MENU button.
2. Press the UP " " or DOWN " " button until “SIREN LEVEL” is displayed.
3. Press the SELECT button and “HIGH” or “LOW” will start blinking.
4. Then press the UP " " or DOWN " " buttons to choose “HIGH” or “LOW”
volume.
5. Press the SELECT button to save your setting.
Selectable Alert Option
The receiver can be programmed to only sound the voice or siren alert for select
weather emergency messages. Those messages unimportant to you can be
programmed to only display a message, minimizing annoyance.
To program the emergency messages you want to silence, follow these steps:
a. Press the MENU button to open menu options.
b. Press the UP " " or DOWN " " button until “DEFEAT—SIREN”
displays and press the SELECT button to confirm.
c. Using the UP " " or DOWN " " buttons, scroll through the different
alerts you want to silence.
d. After making your selection, press the RIGHT “>” button to change the
status of the event from “ENABLE” to “DISABLE”.
e. Press the MENU button to confirm your selection and exit the
programming option.
Testing the Alert
1. To test the alert function to ensure it is working, press the MENU button.
2. Press the UP " " or DOWN " " buttons until “SIREN—TEST” is
displayed on the screen.
3. Press the SELECT button to sound the alert siren.
4. Press the SELECT button again to silence the alarm.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Reviewing Alerts
The JX-M133 weather receiver can store 10 different alerts/events with overlapping
effective time in its memory. If the receiver receives a new alert while a previous alert
is still in effect, it automatically displays the new alert message. Press the UP " " or
DOWN " " button to review the past alerts, press the RIGHT “>” button to review
the ending time of this alert. If an alert is expired, the “EXPIRED” will display on LCD
after press the RIGHT “>” button.
Deleting Alerts
The expired alerts/events can be deleted by press the SELECT button.
1. Press the UP " " or DOWN " " button to review the alerts.
2. Press the RIGHT “>” button to review the ending time of this alert.
3. If an alert/event is expired, press and hold the SELECT button for 2 seconds to
delete it, the “DELETED” will display on LCD.
4. If an alert/event is still in effect, it can’t be deleted and “UNDELETE” will display
on LCD after press and hold the SELECT button for 2 seconds.
LED Indicators
The JX-M133 features three LED indicators with different colors to express different
alert level as follows:
Yellow: Labeled ADVISORY and illuminated when an advisory level alert
is received.
Orange: Labeled WATCH and illuminated when a watch level alert is
received.
Red:
Labeled WARNING and illuminated when a warning level alert is
received.
Note: The color-coded indicator will remain illuminated until the alert/event expires.
Alert Out Socket
The Alert Out socket is provided on the back of JX-M133. The socket’s output is
compatible with home automation alert devices for loud siren.
LCD Backlight Adjusting
JX-M133 features 4 levels LCD backlight (Off, Low, Middle, High), press the
SNOOZE/DIMMER button to set the brightness of LCD backlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
Low Battery indication
•
We strongly recommend installing backup batteries even unit works in AC
power supply in case AC power fails.
When battery is low voltage, the
•
indicator on LCD will appear. Please
uninstall the old batteries and install new batteries when these occur.
No Reception Warning
If no alerts are received for 10 days, the LCD will display “NO RECEPTION” every 30
seconds. If this happens, check your county code and channel setting for setting
error. If you receive a clear signal from the NWS, try using the “ALL counties” setting
to receive all alerts for all counties.
Notes on reception:
The National Weather Service operates a system of weather and hazard alert
broadcasts covering a large area of the United States. Currently, only a few areas are
not covered. Typical broadcasts are within reception distance of 25-50 miles of the
weather station. JX-M133 weather receiver can receive broadcasts from up to 50
miles from the weather station, depending on your location and conditions of weather,
terrain, etc. If you find reception is not good in your area, try different locations in your
home or office to find a spot of improved reception.
Placement near a window usually improves reception.
If a weather broadcast cannot be heard on any of the 7 channels, contact your local
NWS office and verify the closest station is on air. Also verify the channel frequencies
the station is broadcasting. If your NWS is transmitting and you are not receiving
the broadcasts, you may need an external antenna to improve the reception.
Please note: Metal structures are more difficult to receive reception in, because metal
interferes with the signal. If you live in a metal structure, you may need an external
antenna.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
OPERATIONAL INSTRUCTIONS
IMPORTANT!
The fact that you can get clear voice reception does not guarantee that an
emergency alert will trigger this unit’s alerts. To test actual reception, the unit must
receive the weekly Test or Emergency Alert Signal Broadcast.
The National Weather Service (NWS) broadcasts a Test Alert every week on
Wednesday between 11:00 am and 12: 00 noon. To find out the specific test
schedule in your area, contact your local National Oceanic and Atmospheric
Administration (NOAA) or National Weather Service (NWS) office. These offices are
listed in the telephone book under “US Government”.
When you are traveling with your radio and want to use it in a new location, make
sure you have the correct Weather Channel (1-7) and county code. Verify that the
unit can be activated by the test broadcast in the new location.
Antennas
FM/Weather Band
Pull out the Telescopic Antenna and adjust its length and angle for optimum
reception.
AM
This unit has a built-in AM antenna. For better AM reception, turn the unit for a
clearer signal.
EXT. ALERT Jack
This unit features a 3.5mm EXT. ALERT Jack for an external trigger (on/off) out port.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
TROUBLESHOOTING GUIDE AND SPECIFICATIONS
If you experience difficulties in the use of this unit, please check the following before
calling for Customer Service.
•
No power.
o
Ensure the AC Power adapter is securely connected to the DC jack and
plugged into the wall outlet.
o
Check if the backup batteries have been installed.
•
No sound
o
o
Radio may not be turned on, turn the unit ON.
Batteries may not be installed. Install four (4) fresh “AA” size batteries in
the battery compartment.
o
The unit may not be connected to power source. Connect the AC power
adaptor to both the unit and the wall outlet.
o
Volume may be turned down. Adjust the volume.
•
•
No weather broadcast when the WEATHER/HAZARD ON/OFF button is
pressed
o
o
The telescoping antenna may not be fully extended. Extend the antenna.
The unit may be in an area where radio reception is weak. Move the unit
near a window. It may also be necessary to install an external antenna.
Ensure that the weather band channel has been properly selected.
o
The unit does not respond properly to NWS weather alert broadcasts
o
o
Ensure that the proper S.A.M.E. county code(s) have been programmed
into the radio.
Check with the National Weather Service to see if the local tower is
broadcasting.
Specifications
•
Frequency Range
o
o
o
AM: 530kHz – 1710kHz
FM: 87.5MHz – 108MHz
WB: 162.400MHz – 162.550MHz
•
Connectivity
o
o
o
o
3.5mm stereo headphone jack
3.5mm external alert jack
AC adapter jack
RCA antenna jack
•
Power Requirement
o
AC Adapter:
°
°
Input: 120V, 60Hz (UL listed)
Output: 12V 250mA (center negative)
o
Battery: 6V, (4 x “AA” size batteries, not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
USER SAFETY GUIDE
WARNING
•
•
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING WATER AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH
AS VASES SHALL BE PLACED ON APPARATUS.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS-Continued
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15) Grounding or Polarization – This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
Alternate Warnings – This product is equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
16) Ventilation – Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
17) The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS-Continued
CLEANING
Always disconnect unit from power supply before attempting to
clean it. Use soft cloth moistened with soapy water, and wipe
gently. Do not use solvents or abrasive materials.
LASER SAFETY
This unit utilizes laser technology. Only a qualified professional
should remove the cover or attempt to service this device, due to
possible eye injury.
CAUTION – CLASS 1 LASER PRODUCT
Use of controls adjustments and/or performance of procedure other
than specified herein may result in hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam. CAUTION: HAZAROUS LASER
RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
YOU CAN HELP TO PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non-
working electrical equipment to an appropriate waste disposal center.
FOR USED BATTERIES
Disposed of the used batteries properly. Please follow the local
regulations for the battery disposal.
FCC NOTICE TO A USER IN USA
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS-Continued
FCC RULES
This device complies with Part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
Note: Do not make changes or modify the device in any way. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
IMPORTANT NOTES ON HEARING
Your hearing is very important to you and to us, so please take care when operating
this equipment. We strongly recommend you to follow the guideline below in order to
prevent possible damage or loss of hearing.
If you continuously listen to the loud sounds, your hearing will adapt to continuous
loud sounds and will give you the impression that the volume has been reduced.
What seems normal to you may in fact be harmful. To guard against this BEFORE
YOUR HEARING ADAPTS, set the volume at a low level and slowly increase the
volume level until you can hear comfortably and clearly without distortion. Damage to
your hearing is accumulative and is irreversible. Any ringing or discomfort in the ears
indicates that the volume is too loud. Once you have established a comfortable
listening level, DO NOT INCREASE THE VOLUME LEVEL FURTHER.
In the use of headphones, please take more attention. Hearing experts say that
listening to a loud music can damage your hearing, especially when listening to
music with headphones.
IC NOTICE TO A USER IN CANADA
Since digital circuitry may cause interference to other radio or television tuners
nearby, switch this unit off when not in use or move it away from the affected
radio/television tuner.
NOTE: This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference Regulations of
Industry Canada. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television operation (which
can be determined by turning the equipment off), the user is encouraged to try to
correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio / TV technician for help.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS-Continued
WARNING!
•
•
The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
Mains plug is used as the disconnect device. It shall remain readily operable
and should not be obstructed during intended use. To be completely
disconnected, the apparatus from supply mains, the mains plug of the apparatus
shall be disconnected from the mains socket outlet completely.
ADDITIONAL IMPORTANT INSTRUCTIONS
•
Place the apparatus with some distances from the nearby objects or walls for
sufficient ventilations. The ventilation should not be impeded by covering the
ventilation openings with items such as newspapers, table-cloths, curtains, etc.
No naked flame sources such as lighted candles should be placed on the
apparatus.
•
•
•
Dispose of used batteries properly. Follow the local regulation for the battery
disposal.
Use this apparatus in the moderate climates. It is recommended not to use this
apparatus such in a lightning storm.
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM/Weather band Radio w/ Dual Alarm Clock
V10M10_IM_EN_06022009
Download from Www.Somanuals.com. All Manuals Search And Download.
TEL: 516-626-7188
FAX: 516-626-7105
© 2009 jWIN Electronics Corp. All rights reserved. No portion of this printed material or
product enclosed herewith including design, shape and graphics, may be reproduced or
transmitted in any form without the expressed written consent of jWIN Electronics Corp.
by any means, electronic or mechanical, including photocopying, recording or use of an
information storage and retrieval system. Any unauthorized distribution or reproduction of
this printed material or product, or any portion there of, will be prosecuted to the fullest
possible extent of the law.
Download from Www.Somanuals.com. All Manuals Search And Download.
|