Jwin Headphones i903 User Manual

Noise Canceling Headset with  
Bluetooth® Wireless Technology  
Instruction Manual  
i903  
Please read this manual carefully before operating and save it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
USER SAFETY GUIDE  
INSTRUCTIONS ON ENVIRONMENT PROTECTION  
Do not dispose of this product in the usual household garbage at the end of  
its life cycle; bring it to a collection point for the recycling of electrical and  
electronic appliances. This symbol on the product means the instructions for  
use or the packaging will inform about the methods of disposal. The materials  
are recyclable as mentioned in its marking. By recycling, material recycling,  
and other forms of re-utilization of old appliances, you make an important  
contribution to the protection of the environment. Please inquire at your local  
community administration for an authorized disposal location.  
Important Safety Instructions  
1. Read instructions – All safety and operating instructions should be read before the  
appliance is operated.  
2. Retain instructions – The safety and operating instructions should be retained in a  
secure place for future reference.  
3. Heed warnings – All warnings on the appliance and in the operating instructions  
should be observed.  
4. Follow instructions – All operating and use instructions should be followed.  
5. Water and moisture – The appliance should not be used near water (bathtub,  
kitchen sink, laundry tub, pool, etc.).  
6. Heat – The appliance should be situated away from heat sources such as radiators,  
heat registers, stoves, or other appliances (including amplifiers) that produce heat.  
7. Power sources – The appliance should be connected to a power supply only of the  
type described in the operating instructions or as marked on the appliance.  
8. Cleaning – The appliance should be cleaned with a dry cloth.  
9. Objects and liquids entry – Care should be taken so that objects do not fall and  
liquids are not spilled into the device’s openings.  
10. Servicing – The user should not attempt to service the appliance beyond that  
described in the user's operating instructions. All other servicing should be referred to  
qualified service professional.  
Additional Safety Instructions  
When not in use, keep your device in a safe place where it will not be bent or crushed.  
Keep this device away from children. Some small and detachable parts might be  
swallowed by children and result in harm to them.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 2 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
USER SAFETY GUIDE  
FCC Notice (USA)  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation. Refer to 47 CFR Sec. 15.19.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
NOTE: Changes or modifications not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the equipment. Refer to  
47 CFR Sec. 15.21.  
Industry Canada Notice to Canadian Users  
Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation of the device. Refer to IC RSS 210 Sec.  
5.11. The term “IC” before the certification or registration number only means that the  
registration was performed based on a Declaration of Conformity and that Industry  
Canada technical specifications were met. It does not imply that Industry Canada (IC)  
approved this equipment. Refer to Self-Marking 6(f) and RSP 100 Sec. 4.  
About Electromagnetic Interference (EMI)  
This device is designed and manufactured not to exceed the exposure limit for radio  
frequency energy, which is set by the Federal Communications Commission of the U.S  
government.  
The term “EMI” is short for the electromagnetic interference caused by the  
electromagnetic field generated by electronic devices. In fact, most electrical appliances  
and devices emit electric and magnetic fields, and most of modern electronic devices are  
susceptible to the EMI if they are inadequately shielded or designed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 3 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
USER SAFETY GUIDE  
About Electromagnetic Interference (EMI) - Continued  
If you use any personal medical device, such as a pacemaker, please consult the  
manufacture of your medical device to determine if it is adequately shielded from EMI.  
Your physician might assist you in obtaining this information.  
Please turn off this device if you are instructed to do so, especially on an airplane or  
in a hospital.  
Please keep away from medical instruments in a hospital or medical unit while using  
this device.  
IMPORTANT NOTES ON HEARING  
Your hearing is very important to you and to us. We strongly recommend you to follow  
the guideline below in order to prevent possible damage to or loss of hearing.  
Hearing experts caution that listening to loud sounds can damage hearing over time. With  
continuous listening to loud sounds, hearing adapts and will give the impression that  
volume has reduced. What seems normal may, in fact, be harmful. To guard against this  
before hearing adapts, set the volume at a low level and slowly increase the volume level  
until sound can be heard comfortably and clearly without distortion. Damage to hearing is  
accumulative and is irreversible. Ringing or discomfort in the ears indicates that the  
volume is too loud. Once a comfortable listening level has been established, do not  
increase the volume level further.  
Cautions  
If you experience a ringing sound in your ear, lower the volume or discontinue the use  
of this product.  
Do not use the headphones while driving or cycling. Because this product reduces  
the external noises, you might not be able to hear the warning sounds, such as an  
automobile horn, and might result in a traffic accident. Additionally, listening to  
headphones while driving is illegal in many places  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 4 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 5 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
TABLE OF CONTENTS  
GETTING STARTED  
Introduction. …..………..………………………..……………………………………… 7  
What’s Included…..…………………………..………………..………………………… 7  
What is Bluetooth wireless technology? ................................................................ 8  
Charging the headset and audio transmitter…………………………………………  
9
Using your computer’s USB port to charge…………………………………………… 9  
Notes on charging………………………………………………………………………9  
OPERATING INSTRUCTIONS  
Location of controls……………………………………………………………………… 10  
Turning on/off the i903 or wireless audio transmitter (dongle)……………………… 11  
Pairing i903 with the included wireless audio transmitter (dongle)………………… 12  
Pairing i903 with your mobile phone or audio device……………………………….. 13  
Notes on pairing………………………………………………………………………… 14  
Making a call……………………………………………………………………………… 15  
Muting the sound………………………………………………………………………… 15  
Answering a call………………………………………………………………………… 16  
Notes on answering a call ……………………………………………………………… 16  
Ending a call……………………………………………………………………………… 16  
Answering a call while already on the phone ………………………………………… 16  
Answering a call while listening to music ………………………………………………16  
Adjusting the volume…………………………………………………………………… 17  
Connecting i903 to your audio device……….………………………………………… 17  
Listening to music……………………………………..………………………………… 18  
Music playing functions………………………………………………………………… 18  
TROUBLESHOOTING GUIDE  
Questions and answers about the product…………………………………………… 19  
SPECIFICATIONS  
Technical information about the product……………………………………………… 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 6 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
GETTING STARTED  
iLuvTM Noise-Canceling Headphones with Bluetooth® Wireless Technology  
The i903 frees you from the bondage of a wired environment using Bluetooth wireless technology. Not  
only that, but outside sounds that can be a distraction to pure music enjoyment or an annoyance  
during an important phone call virtually disappear, helping you focus on what you want to hear and not  
on what you have to hear. This swivel-designed noise canceling headset has comfortable soft-  
cushioned ear pads, and with its mini-USB connection you can attach to most audio devices using the  
included mini USB to 3.5 mm cable. Plus, using the audio transmitter with Bluetooth wireless  
technology (included), the i903 essentially transforms an audio device not equipped with Bluetooth  
wireless technology into one with it. Bluetooth wireless technology also helps you connect to your  
phone without being physically attached to it, freeing you to walk around and use your hands the way  
you would if you were talking to a person in the room with you. What’s more, you can talk and listen  
longer with the i903. With nine hours of talking time is available with 8 hours of listening time, the i903  
helps you enjoy walking and talking more than you did before.  
Listen to your music wirelessly with Bluetooth wireless technology  
Answer or make your calls wirelessly without taking your mobile phone out  
Highly effective noise-canceling circuitry enhances audio sound quality in noisy environments  
Audio devices without Bluetooth wireless technology can connect to i903 using the included  
wireless audio transmitter  
Swivel design and enhanced soft-cushioned ear pads give you better comfort  
Integrated remote control functions (Play / Pause / Skip / Stop)*  
Supports the direct audio wire connection using the included USB mini to 3.5mm cable  
Supports HSP, HFP, A2DP, and AVRCP profiles  
Standby time up to 48 hours  
Continuous listening time up to 8 hours  
Continuous talking time up to 9 hours  
Communication range up to 33 ft  
Compliant with Bluetooth V1.2  
What’s included  
Wireless noise-canceling headphones  
Wireless audio transmitter  
USB power adapter  
USB cable  
Mini-USB to 3.5mm cable  
Dual-prong plug adapter  
Carrying pouch  
Instruction manual  
Warranty card  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 7 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
GETTING STARTED  
What is Bluetooth wireless technology?  
Bluetooth wireless technology is a short-range wireless  
communication technology intended to replace the cables  
connecting electronic devices while maintaining the high  
level of security. With Bluetooth wireless technology, two  
devices can communicate wirelessly at the same time  
without the need to face each other or the concern of  
interference from other wireless communication within its  
optimum range of 33 feet.  
Through a process called “Pairing,” two or more devices  
with Bluetooth wireless technology can interact with each  
other without interference from other wireless platforms  
nearby, including other Bluetooth wireless communications  
between unrelated devices.  
Note: In order to use this headset with other devices featuring Bluetooth wireless  
technology, such devices must be supported by the same profiles as the headset. Refer  
to the owner’s manual of the accompanying device for its Bluetooth profiles and for  
pairing instructions and operating features.  
* The integrated remote control feature is only supported when the connected devices  
support the remote control feature through Bluetooth wireless technology.  
When connected to a computer or a USB power adapter with the included USB cable,  
i903 can only be charged. Its other functions will be disabled.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 8 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
GETTING STARTED  
Charging the Headset and Audio Transmitter  
Before the first use of this headset, it is recommended to fully charge  
the headset and the included audio transmitter (dongle). To do so,  
follow the instructions below:  
1. Locate the mini USB port (on the bottom of the right headphone,  
or top right on the dongle) before attaching USB cable.  
Mini USB port  
2. Attach other end of cable to supplied USB power adapter.  
3. Plug the supplied USB power adapter to an AC outlet.  
4. Plug the other end to the USB connector on the headset  
or dongle. The red light will be on when connected. When  
the headset/dongle is fully charged, the red light will go off.  
5. Unplug the USB adapter when the headset/dongle is fully  
charged.  
Using your Computer’s USB port to Charge  
If your computer has a USB port, you can also charge the headset or dongle your  
computer.  
1. Follow the directions above for connecting the USB cable to the headset or dongle.  
2. Connect the USB cable into the USB plug on a computer.  
3. Unplug when fully charged.  
Notes on charging  
Use the only the included power adapter to charge the headset.  
The built-in rechargeable battery should be charged at least once every two months.  
Headset cannot be used while charging.  
Important: If your unit displays red flash and you hear long beep sound while operating,  
this indicates low battery condition, so please charge the unit before operating again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 9 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
LOCATION OF CONTROLS  
1. Folding Head band  
2. Multi-function button  
3. Ear cushions for enhanced comfort and noise reduction  
4. Built-in microphone to pick up your voice  
5. USB jack to connect to power adapter or audio device  
6. Volume control  
7. LED indicator lights when Noise Cancellation is activated  
8. Power on/off switch for Bluetooth and N/C  
9. Play/Pause button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 10 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Turning On/Off the i903 or Wireless Audio Transmitter (dongle)  
To turn on the i903 and/or the included wireless audio transmitter (dongle), follow the  
instruction below:  
Please find the on/off switch located on the left  
earpiece.  
Three way Switch functions:  
(Position 1) OFF: Headset is off  
(Position 2) Bluetooth: Bluetooth is in standby mode  
(Position 3) N/C On: Noise Canceling feature  
Activated  
To Enable Bluetooth Feature on i903 Headset:  
Once the headset is set to standby mode, you could activate the Bluetooth wireless  
technology by pressing and holding the Multi-function button on the headset for  
approximately three (3) seconds. The i903 headset will make a high-pitched beep.  
Followed by blue blinking light, indicating the device has been turned on.  
To Enable Bluetooth Feature on Wireless Audio Transmitter (Audio Dongle):  
Press and hold the On/Off Button on the Dongle for three (3) Seconds, then you will see  
a blue blinking light on the button, indicating device is on and Bluetooth feature is ready.  
Mini USB  
port  
Multi-function  
button  
To turn off the i903’s Bluetooth feature or go into standby mode  
Standby mode:  
Press and hold the Multi-function button for five (5) seconds, then you will hear a beep  
followed by red light flashing four times  
OFF Mode:  
You could simply use the On/Off button on the headset.  
To Turn Off the Dongle:  
Press and hold On/Off button for five (5) Seconds, you will see a red light flashes for four  
times, indicating the device is off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 11 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Pairing i903 with the Included Wireless Audio Transmitter (Dongle)  
The i903 can be used with an audio device that is not designed to support Bluetooth  
wireless technology using the supplied wireless audio transmitter (dongle). In order to  
answer and place phone calls while using the dongle, it is important to pair the mobile  
phone first. After pairing the mobile phone according to the previously-listed instructions,  
follow these directions to set the pair the i903 with the dongle.  
1. To set the i903 into pairing mode, make sure to turn on the switch located on the left  
ear piece. Then press and hold the Multi-Function button for five (5) seconds.  
2. Press and hold the On/Off button on the dongle for  
approximately five (5) seconds.  
3. Both i903 and Dongle will display flashing Blue and red  
lights, indicating that both are in pairing mode.  
4. Place the headset near the  
dongle when both are in  
pairing mode.  
5. When the  
alternating red  
and blue blinking  
lights on both  
devices change  
to a blue blinking  
light ONLY,  
pairing is  
complete.  
6. Plug the 3.5mm end of the dongle into the  
headphone jack of an audio device and enjoy  
music playback wirelessly through the i903  
stereo headphones.  
Note: Only the volume can be controlled on the  
i903 when using the dongle. All other functions  
(skip, stop, forward, etc.) must be controlled using  
the controls on the audio device itself.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 12 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Pairing i903 with your Mobile Phone or Audio Device  
Before using this headset, make sure that it is paired  
with a mobile phone and audio devices with Bluetooth  
wireless technology. To pair with such a device, follow  
the instructions below:  
1. Please make sure the headset is at standby mode. If  
i903 is currently turned on then press the Multi-  
Function button for approximately five (5) seconds.  
There will be a high-pitched beep with red light flashes  
about 4 times and headset will go into standby mode.  
2. Press and hold the Multi-function button for approximately five (5) seconds until the  
red and blue lights blink alternately around the button. The headset is now ready for  
pairing. (Note: Pressing the Multi-function button longer than five (5) seconds will  
turn off the headset. If this fails, then turn off the headset and turn it on again by  
holding the Multi-Function button for five (5) seconds for pairing mode)  
3. Set your mobile phone or audio device to its pairing mode (phones and audio devices  
with Bluetooth wireless technology will have their own pairing instructions. See  
owner’s manual of the phone or device for these instructions).  
4. Place the mobile phone or audio  
device and the i903 close together  
during pairing. The mobile phone  
and most audio devices will detect  
i903 and identify it, displaying the  
model number i903.  
5. Once the i903 has been identified, confirm as per  
the instructions on the device. You will be required  
to enter a password on the next screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 13 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Pairing i903 with your Mobile Phone or Audio  
Device – Continued  
6. Enter the password: “0000.” The phone or device will display  
a confirmation message after a few seconds. Once the  
headset is correctly paired, the light will stop blinking red and  
blue alternately, and will blink blue only.  
7. Repeat this procedure each time an additional phone or  
audio device needs to be paired with the i903.  
8. Enjoy music and  
answer calls  
wirelessly using the  
i903.  
Notes on Pairing  
Be aware that in order to answer and place calls while listening to music, the i903  
must be paired with a mobile phone BEFORE it is paired with audio devices or the  
audio adapter.  
This headset will not be recognized by your mobile phone unless it is properly paired.  
The i903 cannot pair with mobile phones which are not designed with Bluetooth  
wireless technology. It is important to follow both these instructions and those which  
accompany the corresponding mobile phone or audio device.  
The i903 can also be paired with a computer which supports Bluetooth wireless  
technology. For pairing instructions for such a computer, consult the owner’s manual  
for the computer or see a computer specialist.  
The i903 is designed to remember pairing information even when it is turned off.  
However, this feature only works if the corresponding mobile phone is designed with  
the same feature. Consult the owner’s manual of the mobile phone or audio device  
for these design features.  
The i903 can only be paired with two devices at the same time; one with the mobile  
phone and the other with an audio device or the supplied wireless audio transmitter.  
Attempting to pair the i903 with a third device will result in the loss of the previous  
pairing connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 14 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Making a Call  
The i903 is designed to allow a user to place and answer calls while listening to music  
wirelessly with Bluetooth wireless technology. Your mobile phone must be paired with the  
i903 FIRST before pairing with other audio devices or the wireless audio transmitter. How  
calls are made, however, depends greatly on the phone to which the i903 is paired.  
1. Voice dialing: This unit supports voice dialing only if the corresponding mobile phone  
supports voice dialing. Please consult the owner’s manual of your mobile phone to  
see if this feature is available. It is recommended that this headset is used to record  
the dialing voice.  
a. Press the Multi-function button once.  
b. Say the name of the person you want to call.  
Some newer phones will ask you to confirm from among a choice of similar  
sounding names from which you respond with “yes,” or “no.”  
Other older phones will dial directly from your voice recording of a particular  
name.  
Please refer to the owner’s manual for your mobile phone for instructions  
regarding this function.  
2. Normal dialing: Dial the telephone number on your mobile phone. When the call  
connects, it will be heard through the headset.  
3. Adjusting the volume: Press the Volume buttons (+/-) to a comfortable listening  
level. This function only works when supported by the corresponding mobile phone.  
Muting the Sound  
1. To mute the sound during a phone conversation, press the Multi-function button and  
the Volume – button at the same time until there is a sound inflection in the  
conversation. The microphone will now be muted and the other person will not be able  
to hear your voice.  
2. To return to normal mode, press and hold both buttons again.  
Press Volume - & Multi-  
Function button at the  
same time to Mute  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 15 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Answering a Call  
It is very simple to answer a call with the i903, whether listening to music or already  
talking on the phone.  
1. An incoming phone call will be indicated by a ring after which the blue light on the  
i903 will blink. Press the Multi-function button once to answer the call.  
2. If the call is received while you are listening to music, the music will pause or mute  
(depending on your audio device’s formatting), and the call can be taken.  
3. If the headset is off when there is an incoming call, press the Multi-function button to  
turn on the headset and answer the call as usual.  
4. If your mobile phone supports the “automatic function” and it is turned on, this headset  
will automatically answer the phone whenever there is an incoming call.  
5. Please refer to the operating instructions in the owner’s manual of your mobile phone  
and your audio device regarding these functions.  
Notes on Answering a Call  
When there is an incoming call, some phones might not ring when paired with i903, but  
there will be a beeping sound from the headset. Press the Multi-function button to  
answer the phone when you hear this beep.  
Similarly, some phones may not send an incoming call signal to the headset. Press the  
Multi-function button when the phone rings.  
Ending a Call  
There are several ways to end a phone call.  
1. Press the Multi-function button on the headset.  
2. Press the End key on the mobile phone.  
3. A call will also end as the person on the other end hangs up.  
Answering an incoming call while already on the phone  
With the i903, it is possible to answer an incoming call while already on the phone.  
1. There will be a sound inflection during the phone conversation. Press and hold the  
Multi-function button until there is a beep. The previous call will be placed on hold  
without disconnecting and the incoming call can be answered.  
2. To return to the previous call, press the Multi-function button again until there is a  
beep.  
Answering an incoming call while listening to music  
With the i903, it is possible to answer an incoming call while listening to music when the  
mobile phone is paired first.  
1. There will be a sound inflection during the music play. Press the Multi-function button  
and hold. The music will stop and the call can be answered.  
2. To return to the music play, press the Multi-function button again until there is a beep.  
Note: Your mobile phone with Bluetooth wireless technology must be paired with the i903  
Before these functions are attempted. If audio devices or audio adapter are paired before  
the mobile phone, these functions will not perform.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 16 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Adjusting the Volume  
To adjust the volume on the i903 (for both phone calls and music), adjust the volume  
control buttons as shown below.  
Right/rear view  
Volume +  
Volume -  
1. Press the Volume + button to increase the volume during a phone call or while  
listening to music.  
2. Press the Volume – button to decrease the volume during a phone call or while  
listening to music.  
Connecting i903 to Your Audio Device  
Using the USB cable provided, you can connect the i903 to your iPod® or other stereo  
audio devices.  
Plug USB cable into the USB jack located at the bottom of the right earphone on your  
i903 (see illustration). Plug in the 3.5mm connector into your audio device. When  
connecting headphones directly to an audio device, the Bluetooth wireless technology  
functions are automatically disabled.  
USB Jack  
USB Cable  
3.5mm Connector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 17 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
OPERATING INSTRUCTIONS  
Listening to Music  
In order to listen to music on the i903, it must be paired with a device equipped with  
Bluetooth wireless technology. To pair with such a device, follow the instructions below:  
1. Turn off the Bluetooth wireless communication if it is currently turned on by pressing  
the Multi-function button for approximately five (5) seconds.  
2. With the Bluetooth wireless communication off, hold the Multi-function button for  
approximately five (5) seconds until the red and blue lights blink alternately around the  
button. The headset is now ready for pairing.  
3. Set your device with Bluetooth wireless technology to its pairing mode (see owner’s  
manual of the device for these instructions). The model number of this headset is i903.  
If the device requires a model number entry, please enter “i903.” The password for  
the headset is “0000.  
4. Please enter this password if required by the device. If the headset if correctly  
paired, the blue light will blink.  
Multi-function  
button  
5. In order to make and receive calls on your mobile phone with Bluetooth wireless  
technology while listening to music on the i903, be certain to pair the phone BEFORE  
pairing an audio device or the audio adapter.  
Music Playing Functions  
1. Volume+/Next : Press and hold this button (>>) for three(3) seconds to skip to the  
next song.  
2. Volume-/Previous: Press and hold this button (<<) for three(3) seconds to return to  
the previous song  
3. Play/Pause control: Press the Play/Pause button to play or pause music.  
4. Multi-function/STOP button: Press once to stop, press one more time to Play.  
Note: Play/Pause Button and Multi-Function Button will act as play button when player is  
in Stop Mode or Pause mode.  
1
4
3
2
Active-Noise Reduction remains activated when the headphones are powered on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 18 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
TROUBLESHOOTING GUIDE  
1. ANR does not eliminate all outside sounds.  
o
This is normal. No ANR headset on the market can completely eliminate  
outside noises. The noise reduction function only reduces the amount of  
noise and i903 is capable of -15dB noise reduction.  
2. The headset does not work with my mobile phone.  
o
Be certain that your mobile phone is equipped with Bluetooth wireless  
technology. This headset will only work with such mobile phones.  
Additionally, your mobile phone must be paired with the headset BEFORE  
all other pairing.  
3. There is interference on the headset with my phone or music playing  
devices.  
o
The maximum distance for Bluetooth wireless technology is 33 feet (10  
meters). When this distance is approached, background noise will  
increase. Also, a poor signal on the mobile phone may contribute to  
degradation the quality of sound as well.  
4. There is no sound.  
Ensure that the mobile phone or music player is turned on and set up  
correctly. Be certain that the volume is turned up on the headset.  
o
5. Sudden drop of volume or hear static or distortion when using Devices  
with Bluetooth technology  
o
o
o
Please check your battery level and charge if necessary.  
Make sure you are not too far away from the unit.  
Make sure you are free from any interfering devices such as walls and  
any other wireless devices.  
6. Pairing with other devices with Bluetooth technology is not working.  
o
Be sure to check your devices manual to see if A2DP Bluetooth Profile is  
supported.  
o
o
o
Make sure the devices are not too far away from each other.  
Make sure to put the correct password (The default password is “0000”).  
Check with your devices manual if the device supports other Bluetooth  
products.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 19 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
TROUBLESHOOTING GUIDE  
o
Make sure both devices are in pairing mode to accept connections from  
each other.  
o
Make sure the Bluetooth device you are using is Bluetooth Version 1.2 or  
higher for stable connectivity. (Some of the V1.1 devices might not be fully  
compatible. Make sure to check your Bluetooth devices manual for  
compatibility issues)  
7. Can not pair with stereo headset with Bluetooth technology made by  
other manufacturers.  
o
This could happen if the device has its own security method, or unique  
password other then “0000”. Please check with the manufacturer for  
compatibility issues. For full compatibility we recommend iLuv Bluetooth  
Stereo Headset.  
o
o
Make sure headset supports A2DP Bluetooth Stereo Profile.  
Make sure the device is fully charged and you are not too far away from  
the unit.  
o
Make sure you are not using mono headset to pair. (This will not work  
since mono headset uses different Bluetooth profile. If profiles do not  
match with the devices you are connecting to, pairing will fail. Please  
check your device manual, or check with manufacturer to see if device  
has matching A2DP Bluetooth Stereo Profile)  
8. Remote functions like play/pause skip/fwd skip/bkwd does not work  
o
Depends on the device these function might be disabled due to software  
issues.  
o
o
Please refer to owner’s manual of the device you are using.  
If you are using Audio Dongle, most of these dongle will not support  
remote functions, so it is normal for device when control is not working  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 20 -  
Noise-Canceling Headset w/ Bluetooth wireless technology  
V10M10_IM_EN_12072006  
SPECIFICATIONS  
Product Specifications  
Speaker Driver: 30mm NdFeB speaker driver  
Frequency Response: 20Hz – 20kHz (receiving)  
Sensitivity: 105dB ± 3dB (ANR ON)  
Active Noise Reduction Level: -15dB (Max)  
Bluetooth Version: V1.2  
Bluetooth Profile: HSP, HFP, A2DP, AVRCP  
Standby Mode: < 48hrs  
ANR Stereo Function: < 33hrs (with BT function disabled)  
Listening Mode: < 8hrs (@ max. volume, BT & ANR function enabled)  
Talking Mode: < 9hrs (@ max. volume, BT & ANR function enabled)  
Power Sources  
o
Built-in rechargeable battery  
ƒ
ƒ
ƒ
Battery Type: Lithium Polymer  
Battery Capacity: 290mAh  
Charging Time: 2.5 Hours  
o
o
USB power adapterꢀ  
ƒ
ƒ
Input: AC 100V – 240V, 50Hz/60Hz  
Output: DC 5V / 0.5A  
USB port on a computerꢀ  
Power Input: 5V / 500mA  
Unit Dimension (Dia. x H): Approx. 55.2mm x 35.0mm (2.17” x 1.38”)  
Unit Weight: Approx. 112.7g (0.25 lbs)  
Wireless Audio Transmitter  
Bluetooth Version: V1.2  
Bluetooth Profile: A2DP, AVRCP  
Continuous Working Time: 5.5 hours  
Power Sources  
o
Built-in rechargeable battery  
ƒ
ƒ
ƒ
Battery Type: Lithium Polymer  
Battery Capacity: 160mAh (nominal)  
Charging Time: About 2 Hours  
o
o
USB power adapterꢀ  
ƒ
ƒ
Input: AC 100V – 240V, 50Hz/60Hz  
Output: DC 5V / 0.5A  
USB port on a computerꢀ  
Power Input: 5V / 500mA  
Audio Input: 500mV  
Cord: 2.36” / PVC  
Plug: 3.5mm / Gold-plated / Stereo  
Unit Dimension (W x H x D): Approx. 25.0mm x 6.0mm x 60.0mm (0.98” x 0.24” x  
2.36“)  
Unit Weight: Approx. 14g (0.03 lbs)  
* Specifications and features are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 21 -  
TEL: 516-626-7188  
FAX: 516-626-7105  
iLuv is a trademark of jWIN Electronics Corp. Features and specifications are subject to change without prior notification. iPod is a trademark of  
Apple Computer, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics  
Corp. is under license. Mobile phone not included in this package.  
© 2006 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product enclosed herewith including design, shape and  
graphics, may be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means,  
electronic or mechanical, including photocopying, recording or the use of an information storage and retrieval system. Any unauthorized  
distribution or reproduction of this printed material or product, or any portion thereof, will be prosecuted to the fullest possible extent of the law.  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware MB886 User Manual
JDS Uniphase Stud Sensor RM3750 User Manual
Jensen Cassette Player CD 545 User Manual
Jensen Portable CD Player JCDWIN User Manual
JOBO MP3 Player XMP User Manual
Jonsered Trimmer RS44 52 User Manual
JVC Car Stereo System GET0665 001A User Manual
Kenmore Vacuum Cleaner 11621714 User Manual
Kodak Digital Camera V1073 User Manual
Kramer Electronics Camcorder SP 11 User Manual