Caller ID Speaker Phone with Emergency
Remote Control
Instruction Manual
JT-P551
Please read this manual carefully before operating and save it for future reference.
Have a question? Please visit http://www.jWIN.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
USER SAFETY GUIDE
Compliance (USA and Canada)
This product complies with the standards in Part 68 of the FCC Rules in the USA
and CS-03 in Canada.
1. This product must be connected to the public switched telephone network
through a modular telephone outlet or jack.
2. Upon the request of the local telephone service provider, the user of this product
must provide the following information:
• The “line” to which this telephone equipment will be connected (telephone
number)
• The telephone equipment’s FCC registration number and ringer equivalence
number. This information is printed on the back or bottom of the unit.
3. If it is determined that this equipment is malfunctioning, the FCC requires that it
not be used and that it must be unplugged from the modular outlet until the
problem has been corrected.
4. If the product causes harm to the telephone network, the telephone company
may temporarily discontinue telephone service. Whenever possible, the
telephone company will contact a customer prior to a service interruption. If
advanced notice is not possible, the customer will be notifies as soon as possible.
The customer will be given the opportunity to correct the problem.
Download from Www.Somanuals.c-om2. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
TABLE OF CONTENTS
Getting Started
General Features ……………………………………………………………………...
What’s Included …..…………………………………………………………………...
Location of Controls ………………………………………………………………..…
Getting the Telephone Ready for Use ……………………………………………...
Mounting the Phone on the Wall …………………………………………………….
Connecting the Stand for Wall Mounting ……………………………….................
Installing the Batteries ………………………………………………………………..
Using an AC Adapter (Optional) ……………………………………………………..
4
4
5
6
7
7
9
9
Operational Instructions
Description of the Display ……………………………………………………………. 11
Basic Setup ……………………………………………………………………………. 11
Receiving Caller ID Information …………...………………………………………... 15
Emergency Call Function ……………………...…………………………………….. 16
Receiving a Call using the Pendant Remote ………...….………………………… 18
Reviewing the Caller ID List …………………………………………………………. 18
Erasing Data from the Caller ID List ………………………………………………... 18
Calling a Number from the Caller ID List …………………………………………... 18
Name Recording ……………………………………………………………………… 19
Phonebook Search, Delete and Dial Back ...………………………………………. 20
One-Touch Memory …………………………..……………………………………… 20
Pre-Dialing Function ……….…………………………………………………………. 20
Last Number Redial …………………………..……………………………………… 21
Using the Flash Function …………………………………………………………….. 21
Troubleshooting and Specifications …………………………………………….. 22
Download from Www.Somanuals.c-om3. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Thank you for purchasing the JT-P551 Caller ID Speaker Phone with emergency
pendant remote control. Please read and follow the instructions in this manual
carefully to ensure that your product operates correctly.
General Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Supports both FSK and DTMF systems
Emergency call (SOS) function with 2.4GHz wireless pendant remote control
Emergency message recording
Speaker phone system
16-digit liquid crystal display (LCD)
Stores ID information for up to 60 calls
Digital phonebook for 30 telephone numbers
2 one-touch speed dial buttons
Clock and date display
Redial and flash functions
Incoming call indication
Flashing ringer light
Tone / pulse mode selection
Ringer / receiver / speaker phone volume controls
Supports 11 languages: English, French, Spanish, Italian, Portuguese, German,
Dutch, Swedish, Danish, Polish, Finnish
3 languages for voice reporting: English, French, Italian
•
What’s included
•
•
•
Caller ID phone
Wireless pendant remote control
Instruction manual
Download from Www.Somanuals.c-om4. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Location of Controls
1
10
11
2
3
4
5
12
6
7
13
14
8
9
15
16
1. LCD Screen
9. CID/ESC Button
2. DEL Button
3. OK DIAL Button
4. Handset
5. SOS Emergency Dial Button
6. M2 (Memory 2)
7. M1 (Memory 1)
8. MENU Button
10. SEARCH ▲ Button
11. SEARCH ▼ Button
12. ONE CALL Button with light
13. Receiver Volume Button
14. Number Keypad
15. REDIAL/P Button
16. FLASH Button
Getting the Telephone Ready for Use
1. Choose a desired location for the unit (mounted or on a flat, level surface).
2. Adjust the removable tab located above the speaker on the base of the phone.
• The tab slides for easy removal.
Download from Www.Somanuals.c-om5. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Getting the Telephone Ready for Use- continued
• For wall mounted units, the side of the tab with the lip must be situated toward
the top of the base to allow the handset to hang on the base without falling.
The lip fits into the opening under the earpiece on the handset.
LIP
NO LIP
• For flat, level placement, the side of the tab with the lip should be situated
toward the bottom of the base to allow smooth removal of the handset from
the base.
3. Plug one end of the coiled telephone cord into the jack on the handset, and the
other into the matching jack on the left side of the unit’s base.
4. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base
(marked TEL-LINE), and the other end into the wall jack which supplies
telephone service.
Download from Www.Somanuals.c-om6. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Mounting the Phone on the Wall
1. Choose a desired wall location for the phone.
Wall mount
hanger
2. Align nails or picture hooks with the wall-
mount hanger located on the bottom
surface of the base.
3. Hammer nails or hangers into the wall so
the phone can hang flush with the wall.
4. Set the removable receiver tab with lip toward the top of the base.
5. Hang phone on nails or picture hangers making certain that the phone is flush
with the wall.
Connecting the Stand for Flat Surfaces
When using the JT-P551 on a flat surface, it is recommended that you use the
included stand.
1. Remove the stand from the plastic wrapper.
2. Turn the phone upside down with the battery compartment closest to you.
3. The stand attaches above where the battery compartment is located.
4. There are four (4) slots. The top slot is large and located in the center of
the bottom surface of the unit. The bottom three (3) slots are situated closer
together and are located near the battery compartment.
Download from Www.Somanuals.c-om7. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Connecting the Stand for Flat Surfaces-continued
5. Line up the bottom three (3) lips on the stand with the bottom three (3) slots
on the bottom of the unit and place the lips into the slots.
6. Using your thumbs, gently press the stand just above the bottom three (3)
lips until the stand clicks into position.
Click!
7. Return the phone to the upright position. The phone is now ready to be
mounted on the wall.
Download from Www.Somanuals.c-om8. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Installing the Batteries
The JT-P551 requires four (4) AA batteries, which are used to operate the
speakerphone, the LCD display, and to retain Caller ID data and any settings
programmed into the phone. Using an optional AC adapter (see Notes below) will
increase the battery’s life span, requiring less frequent battery replacement.
1. Remove the battery compartment cover at the
bottom of the unit.
2. Carefully install four (4) AA batteries by observing
the polarity direction shown in the battery
compartment.
3. Replace the cover.
Notes:
•
Whether installing batteries for the first time or replacing them, do not mix old
and new batteries, nor should alkaline, standard (zinc-carbon), or rechargeable
(nickel-cadmium) batteries be used together.
•
When not using the phone for a long period of time, remove the batteries to
prevent possible leakage and corrosion. Keeping the phone powered by the
optional AC adapter, discussed below, will preserve all data and settings in the
phone’s memory.
Using an AC Adapter (Optional)
If an optional AC power adapter (not included) is used, it plugs into the DC 9V jack
on the rear of the unit and converts common household AC electricity into low
voltage DC power, suitable for the phone’s operation. Such adapters are commonly
available, but before buying, be sure that it can provide the necessary +/- polarity, as
indicated on the unit’s rear panel, just below the DC 9V jack. Once connected, plug
the adapter’s other end into an un-switched (always on) AC outlet, outlet strip, or
extension cord. Even when an AC adapter is employed, the use of batteries is
recommended as a backup in case AC power is ever lost.
Download from Www.Somanuals.c-om9. -All Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
GETTING STARTED
Notes:
•
If neither the batteries nor an AC adapter are connected, the JT-P551 will still be
able to place and receive calls, but the speakerphone, the ability to store Caller
ID data, and the LCD display functions will not operate.
•
•
When batteries are used without an AC adapter, they should be replaced when
the display dims.
When replacing the batteries without an AC adapter connected, it’s the best to
pick up the handset before removing the batteries. Doing so prevents the loss of
stored Caller ID data and programmed settings while the batteries are being
replaced. If not done, it’s possible that all settings and data in the phone’s
memory will be lost.
•
If batteries are not installed in the main unit or the batteries are low, the RED
speaker phone button light will flash. Flashing RED will continue until batteries
are installed.
Download from Www.Somanuals.-co1m0. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Description of the Display
The JT-P551 features a three-line LCD. The top line displays basic information; the
middle line shows the telephone number of the incoming call; and the bottom line
displays the name of the caller. Also included on the display is helpful information
such as:
•
•
•
The word, “NEW” appears on the screen when there are new incoming calls.
The word, “CALL#” indicates the total number of incoming calls received.
The word “REPEAT” on the LCD screen means that the incoming call is
coming in again.
•
•
•
The word “VOICE” appears to indicate voice reporting.
“SOS” appears on the screen when an emergency call is dialed.
Hour: Minute Morning/Afternoon Day/Month are displayed. For example:
“10:15 AM 21/03” (Year is not displayed)
•
•
•
If the time and date programmed into the telephone differ from the
telephone company’s record, the telephone will automatically adjust to the
service provider’s information when receiving calls.
When there has been no operation on the telephone for more than 20
seconds, the LCD will only display the time and date, amount of received
calls and amount of incoming calls.
The JT-P551 can store up to 60 incoming calls. Once 60 calls have been
received, the oldest call will automatically erase when a new call is received.
Basic Setup
In order to navigate the following menu items, press the [MENU] button (opens the
menu). To scroll through menu items, press the [MENU] button repeatedly or the
SEARCH [▲] / [▼] buttons.
Note: Please be sure the telephone lines are connected well and batteries or AC
adapter are installed before starting setting.
1. LCD CONTRAST
•
Press [OK/DIAL] to enter the LCD contrast mode when “LCD CONTRAST”
appears on the screen.
•
•
Press [▲] or [▼] to select the desired contrast level (1 to 5).
Press [OK/DIAL] to confirm.
Download from Www.Somanuals.-co1m1. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Basic Setup-Continued
2. SET DATE / TIME
•
When the LCD displays “ENTER TIME / DATE”, press [OK/DIAL] to enter
this function.
•
•
•
•
When the LCD displays “ENTER TIME”, press [▲] or [▼] to set the hour.
Press [▲] or [▼] to set the minute.
Press [OK/DIAL] to confirm.
Use the same procedure to set the month and day.
3. SET LANGUAGE
•
When the LCD displays “LANGUAGE”, use [▲] or [▼] to select the desired
language, ENGLISH (English), FRANCAIS (French), ITALIANO (Italian),
DEUTSCH (German), ESPANOL (Spanish), PORTUGUES (Portuguese).
NEDERLANDS (Dutch), POLSKI (Polish), SVENSKA (Swedish), DANISH
(Danish), FINNISH (Finnish).
•
Press [OK/DIAL] to confirm your choice.
4. SET VOICE
•
•
When the LCD displays “VOICE”, press [OK/DIAL] to enter.
Use [▲] or [▼] to select the desired language for voice reporting, (VOICE
ENGLISH, VOICE FRENCH, VOICE GERMAN, VOICE ITALIAN.
To disable the voice reporting function, select VOICE NO.
Press [OK/DIAL] to confirm your choice.
•
•
5. SET FLASH TIME
•
•
•
When the LCD displays “SET FLASH TIME,” press [OK/DIAL] to enter.
Press to select flash time from among 100MS, 300MS, or 600MS.
Press [OK/DIAL] again to confirm.
6. SET DIAL MODE
•
When the LCD displays “SET DIAL MODE,” press [OK/DIAL] to enter this
menu.
•
•
Press [▲] or [▼] to choose TONE (T) or PULSE (P).
Press [OK/DIAL] to confirm.
Download from Www.Somanuals.-co1m2. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Basic Setup-Continued
7. SET LOCAL AREA CODE
•
When the LCD displays “LOCAL AREA CODE”, press [OK/DIAL] to enter
this function.
•
•
•
Press [▲] or [▼] to select the first digit of area code.
Press [OK/DIAL] to confirm the first digit.
Use the same procedure to set the rest of the digits.
8. PHONE BOOK ENTRY WITHOUT EMERGENCY NUMBER SETTING
•
•
•
•
•
•
•
When the LCD displays “STORE NUMBER”, press [OK/DIAL] to enter.
Flashing prompt will appear in the middle of the display.
Use the keypad to enter the desired number.
Press [OK/DIAL] to confirm.
A flashing prompt will now appear on the bottom line of the display.
Use the keypad to enter the name (16 letters max.).
Press the number key containing the desired letter and press it repeatedly
until that letter is displayed on the LCD screen. Press the “1” key once for a
space (repeatedly for a symbol). Press “*” and “# ” keys for additional
symbols.
•
•
Press the [DEL] button to correct entry.
Press [OK/DIAL] to confirm followed by the words “EMERGENCY OFF” on
the display.
•
Press [OK/DIAL] to confirm followed by the word “SAVE” on the display and
an audio announcement: “Name recording.”
•
•
•
If you wish to not record a voice tag, press the [DEL] button or;
Press and hold [OK/DIAL] until there is a beep.
To record a Name Tag for the number entered, press and hold [OK/DIAL]
during the entire recording process until finished.
•
•
Release [OK/DIAL] to end the recording. There will be an audio signal of
“STORE,” and the words “STORE NUMBER” will be shown on the display.
Press the [DEL] button to exit this setting.
Note: The JT-P551 can store up to 30 records. The words “MEMORY FULL” will
appear on the LCD screen when the records are full.
Download from Www.Somanuals.-co1m3. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Basic Setup-Continued
9. PHONE BOOK ENTRY WITH EMERGENCY NUMBER SETTING
•
•
•
•
•
•
•
When the LCD displays “STORE NUMBER”, press [OK/DIAL] to enter.
Flashing prompt will appear in the middle of the display.
Use the keypad to enter the desired number.
Press [OK/DIAL] to confirm.
A flashing prompt will now appear on the bottom line of the display.
Use the keypad to enter the name (16 letters max.).
Press the number key containing the desired letter and press it repeatedly
until that letter is displayed on the LCD screen.
•
•
Press the [DEL] button to correct entry.
Press [OK/DIAL] to confirm followed by the words “EMERGENCY OFF” on
the display.
•
•
•
Press [▲] and the display will show “EMERGENCY ON”
Press [OK/DIAL] and the phone will display “XX LOCATION”
Press [▲] or [▼] to edit the position of the entered number in the emergency list
and press [OK/DIAL] to confirm (If a number is already set for the decided
location, “XX overwrite” will display), “SAVED!” will then be shown and the
phone will announce “NAME RECORDING”
•
•
•
If you wish to not record a voice tag, press the [DEL] button or;
Press and hold [OK/DIAL] until there is a beep.
To record a Name Tag for the number entered, press and hold [OK/DIAL]
during the entire recording process until finished.
•
•
Release [OK/DIAL] to end the recording. There will be an audio signal of
“Store,” and the words “STORE NUMBER” will be shown on the display.
Press the [DEL] button to exit this setting.
10. COPY FROM THE CALLER ID TO THE PHONE BOOK
You can copy Caller ID information to the phone book while you are reviewing
the Caller ID information.
•
•
•
Select the required Caller ID memory location by scrolling [▲] or [▼]
buttons.
Press and hold [MENU] button for two (2) seconds, the LCD will display the
words, “COPY TO MEMORY?”
Press [OK/DIAL] button, the LCD will display the word “SAVE.”
Download from Www.Somanuals.-co1m4. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Basic Setup-Continued
11. REMOTE SETTING
•
•
•
•
•
Press [MENU] to enter this mode.
Press [▲] until “PAIR NEW PENDANT” is shown on the LCD screen.
Press [OK/DIAL] twice.
The word, “PAIRING” will flash on LCD screen.
Press the SOS button on the pendant and the word “DONE” will display on
the LCD screen.
•
Press [DEL] to exit the setting
12. RINGER VOLUME
Slide the [RINGER] switch to ‘HI’ position for high ringer volume, ‘MI’
position for medium ringer volume and ‘LO’ for low ringer volume.
•
13. HANDSET VOLUME CONTROL
•
Slide the [RECEIVER] switch from the handset to adjust the handset
volume. ‘NOR’ position for normal handset volume, ‘HI’ position for high
handset volume and ‘VHI’ for very high handset volume
14. SPEAKER PHONE VOLUME CONTROL (MIN. to MAX.)
•
Slide the [SPEAKER] switch from the left side of the base unit to adjust the
speakerphone volume from minimum (Min.) to maximum (Max.).
Receiving Caller ID Information
Your telephone service provider must offer caller ID service in order to activate the
caller ID function on this unit.
1. Incoming Call Display.
•
When there is an incoming call, the LCD will display the number, area code,
name, time and date of the call.
2. Make note of the following indicators.
•
“UNAVAILABLE”: The call is made through a telephone company that does
not offer caller ID service or does not transfer such information long
distance.
•
•
“BLOCKED CALL”: Some areas allow callers the option of preventing their
telephone data from display on other telephones.
MESSAGE ICON: This will appear if you have a message service through
your telephone service provider and someone has left a message.
Download from Www.Somanuals.-co1m5. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Emergency Call Function
1. EMERGENCY MESSAGE
It is important you record the personalized message with all the important
information as below (part B).
A. This unit includes a back-up pre-recorded message. “THIS IS AN
EMERGENCY CALL, TO ACCEPT THIS CALL PRESS ZERO.”
B. Your own message must be recorded to properly use the Emergency Help
System (max. recording time is 20 seconds). The message should always
end with “please immediately hang up if you cannot get me help now. To
accept this call press zero”.
Example: There is a medical emergency at the home of John Smith at 123
Main Street, Apt. 4D, please come at once. Please immediately hang up if you
cannot get me help now. To accept this call press zero.
2. RECORDING AN EMERGENCY MESSAGE
A. Press and release the [MENU] button until the “RECORD MESSAGE” is
shown in the LCD display.
B. Press and hold the [OK/DIAL]. Start your message directly after you hear
the “BEEP” tone and “VOICE” icon is flashing. While recording, keep at a
distance of 15cm from the telephone so that you speak easily into the
microphone on the upper side.
C. Release [OK/DIAL] after you have finished your emergency message. The
message will now be played back automatically.
3. CHECKING THE EMERGENCY MESSAGE
You can check the emergency message at any time.
A. Press and release the [MENU] button until the words “CHECK MESSAGE”
appear on the LCD screen.
B. The press [OK/DIAL] to play back the message.
4. DELETING EMERGENCY MESSAGE (REVERT TO PRE-RECORDED
MESSAGE)
If you have recorded your own message, you can delete this and by doing so
revert to the pre-recording message. Note: As stated above, it is important to
record a personalized message.
A. Press and release the [MENU] button until the words “CHECK MESSAGE”
appear on the LCD screen.
Download from Www.Somanuals.-co1m6. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Emergency Call Function-Continued
B. Then press the [OK/DIAL] to play back the message.
C. During the playback, press [DEL] button. Your own message will be deleted
and you will be using the pre-recorded greeting.
5. ACTIVATING THE EMERGENCY HELP SYSTEM
A. Press and hold the [SOS] button on the telephone for 3 seconds, then the
telephone local alarm will sound for 15 seconds. The telephone will then
dial out the entered emergency help system numbers automatically in
speakerphone mode. or;
B. Using the wireless pendant also can activate the Emergency Help System.
Press and hold down the button on the pendant remote for more than 1
second. The pendant will flash for approximately 15 seconds, the telephone
local alarm sounds for 15 seconds as well.
C. Within these 15 seconds, press [SOS] button or press button on the
pendant remote once more to turn off the Emergency Help System.
D. The telephone dials out the first of the entered emergency numbers (stored
in the phone book emergency location 1) in speakerphone mode, and then
begins playing the emergency message.
E. The emergency message will be played repetitively for 1 minute until the
called party can acknowledge the call by pressing 0 the telephone will be
put in speakerphone operation for 3 minutes.
Note: If 0 is not pressed during the period the message is played, the next
emergency number in the sequence will be dialed out automatically in
speakerphone mode.
F. During 3 minutes speakerphone operation, press [SPEAKER] button or red
button of the pendant to terminate the conversation and the Emergency
Help System will be turned off or:
G. During 3 minutes speakerphone operation, if the called party presses ‘1’
and then presses ‘5’ the Emergency Help System will be turned off and the
conversation will be terminated only after one of the parties hung up.
Note: When the time reaches to 2 minutes 50 seconds, you will hear a signal to
indicate that 10 seconds left to 3 minutes.
Download from Www.Somanuals.-co1m7. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Receiving a call Using the Pendant Remote
Telephone will ring to alert the user of an incoming call.
1. When there is an incoming call, pick up the handset or press [SPEAKER]
to receive the call.
2. You may also use pendant remote to pick up the call. When there is an
incoming call, just press the button of the pendant remote and the
telephone will be put in speakerphone operation.
3. After finishing the conversation, press and hold the button of the pendant
remote again for a few seconds to terminate the call and the telephone will
be returned to on-hook state.
Reviewing the Caller ID List
Press [▲] or [▼] to review incoming calls (up to 60 calls).
Erasing Data from the Caller ID List
1. Press [▲] or [▼] to find the number you wish to erase.
2. Press [DEL] to erase the number from the list.
3. Press [DEL] for approximately 3 seconds for the LCD to show “ERASE
ALL?”
4. Press [DEL] again to erase the entire caller ID list.
Calling a Number from the Caller ID List
In on-hook state:
1. Press [▲] or [▼] to select the desired caller ID record.
2. If the record is less than 10 digits, press [OK/DIAL] once, pick up the
handset and the displaying number will be dialed out automatically.
3. If the record is 10 digits and the first 3 digits of the record is the same as set
area code, press [OK/DIAL], the three digits area code will be erased and it
will display 7 digits number only. The LCD will display “PICK UP OR ADJ”.
Press [OK/DIAL] again to return back to 10 digits with adding area code.
Press [OK/DIAL] once again to show 11 digits with adding ‘1’ as the first
digits and area code as well. Pick up the phone and the number will be
dialed out automatically.
Download from Www.Somanuals.-co1m8. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Calling a Number from the Caller ID List-Continued
4. If the record is 10 digits but the first 3 digits of the record is different from
the set area code, press [OK/DIAL] once to show 11 digits with adding ‘1’
as the first digits. Press [OK/DIAL] again to return back to 10 digits. Press
[OK/DIAL] once again to show 7 digits and first three digits will be erased.
Pick up the phone and the number will be dialed out automatically.
In off-hook state:
1. Press [▲] or [▼] to select the desire caller id record.
2. If the record is less than 10 digits, press [OK/DIAL] once and the displaying
number will be dialed out automatically after 2 seconds.
3. If the record is 10 digits and the first 3 digits of the record is the same as set
area code, press [OK/DIAL], the three digits area code will be erased and it
will display 7 digits number only. Press [OK/DIAL] again to return back to
10 digits with adding area code. Press [OK/DIAL] once again to show 11
digits with adding ‘1’ as the first digits and area code as well. The number
will be dialed out after 2 seconds automatically.
4. If the record is 10 digits but the first 3 digits of the record is different from
the set area code, press [OK/DIAL] once to show 11 digits with adding ‘1’
as the first digits. Press [OK/DIAL] again to return back to 10 digits. Press
[OK/DIAL] once again to show 7 digits and first three digits will be erased.
Pick up the phone and the number will be dialed out automatically. (Please
refer to the table as below for reference)
Name Recording
1. Press [▲] or [▼] to find the party for which you want to record a voice
name (recorded voice will sound for the party when selected from the
phone book) and press [OK].
2. To record, press and hold [OK/DIAL] and begin recording after the beep
(Hold [OK] while recording). Recorded voice name will automatically play
one time.
3. To re-record, press and hold [OK] and record again.
4. Press [▲] or [▼] to find the next party for voice recording and repeat from
step 1.
Download from Www.Somanuals.-co1m9. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Phonebook Search, Delete and Dial Back
1. In the on-hook state, press [▲] and [▼] to check incoming call records,
press [CID/ESC] to enter phone book record.
2. Use [▲] or [▼] to search the desire record or press the first letter of record
name to search the desired record directly.
3. Press [OK/DIAL] to dial back the displaying record.
4. Press [DEL] once, the LCD will display “DELETE?” Then press [DEL] for 2
seconds to delete the showing record.
5. If you want to delete all phonebook records, press and hold [DEL] key until
the LCD display “DELETE ALL?”, then press [DEL] for 2 seconds to delete
all records.
Note: To switch between phone book and caller ID, press [CID/ESC].
One-Touch Memory
1. In the on-hook or off-hook state, press [MENU] button until the LCD
displays “STORE NUMBER.”
2. Press [OK/DIAL] button, then enter the wanted number by using keypad.
3. Press [OK/DIAL] to confirm.
4. Choose the desired location M1 or M2.
5. Press [OK/DIAL] to confirm and the LCD will display “SAVE.”
To dial from one-touch memory keys, lift handset or press the speaker and press the
key (M1/M2) and the number in the memory will be dialed out automatically.
Pre-Dialing Feature
1. Under on-hook state, enter the wanted telephone number.
2. Lift the handset or press [SPEAKER] and the number will be dialed out
automatically.
Note: You may use [DEL] key to modify or erase the number during entering the
wanted telephone number.
Download from Www.Somanuals.-co2m0. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Last Number Redial
The last outgoing number can be redialed automatically just by pressing the
[REDIAL/P] key under off-hook state. This is useful especially if the line is busy.
Flash Function
1. When in an office equipped with PABX, this telephone makes it easy to
transfer calls. Ask caller to wait and press [FLASH] key once.
2. Dial the extension number which caller intended.
3. When the party answers, just hang up the handset.
4. When the line is busy or nobody answers, press [FLASH] key again to re-
connect with the caller.
Important note: To operate this phone, you must have Caller ID Service set up
through your local telephone company. Some functions will only operate if such
service is included in the user’s Caller ID program through the local telephone
company.
Download from Www.Somanuals.-co2m1. A-ll Manuals Search And Download.
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
TROUBLESHOOTING & SPECIFICATIONS
Troubleshooting
• No Display on LCD Screen
o
Brightness on display may be turned down.
ƒ Increase brightness level.
o
No batteries or batteries are improperly installed.
ƒ If no batteries, install 2 AA batteries as directed or
ƒ Install optional AC Adapter (not included).
ƒ Make sure batteries observe to polarities (+/-) as indicated inside the
battery compartment.
• No Dial Tone when handset is picked up
o
Phone may not be connected properly.
ƒ Make sure the handset jack is connected to the base jack using the
colied wire.
ƒ Make sure the base jack (TEL-LINE) jack is connected to the wall
telephone jack using the flat wire.
o
Telephone service may be interrupted by the telephone company
ƒ Contact your telephone company to check the status of your service.
• Static or interruptions during phone conversation
o
Bad connection between phones
ƒ Hang up and dial number again.
o
Harsh weather conditions and/or lightning
ƒ Hang up and dial number when weather conditions improve.
• Can only receive incoming calls and cannot make outgoing calls
o
Telephone service may be limited or suspended by your telephone company
ƒ Contact your telephone company to check the status of your service.
Important Note:
To operate this unit, you must have “CALLER ID SERVICE” setup with your local
telephone company. Some functions such as CALLER NAME INDICATION will only
operate if such service is included in the user’s Caller I.D. program with the local
telephone company.
Specifications
•
Power Requirement
o
o
Battery: 6V (4 x “AA” batteries, not included)
AC Adapter: DC 9V, 300mA, center negative (AC adapter not included)
•
Unit Weight: Approx. 1.4 lbs (0.640kg)
Download from Www.Somanuals.-co2m2. A-ll Manuals Search And Download.
TEL: 516-626-7188
FAX: 516-626-7105
© 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product
enclosed herewith including design, shape and graphics, may be reproduced or transmitted in
any form without the expressed written consent of jWIN Electronics Corp. by any means,
electronic or mechanical, including photocopying, recording, or by use of an information storage
and retrieval system. Any unauthorized distribution or reproduction of this printed material or
product, or any portion thereof, will be prosecuted to the fullest possible extent of the law.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|