Impressa Z5
Fully Automatic
Coffee & Espresso Center
with Clearyl Water Care System
Operating Instructions
and Warranty
Customer Service 1-800-220-5701
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice: Your Impressa Z5 has a 3-prong grounded plug. To
reduce the risk of electrical shock this plug will fit in an outlet
only one way. If the plug does not fit in the outlet contact a
qualified electrician. DO NOT modify the plug in any way.
JURA-CAPRESSO
Jura was founded in 1931 in Switzerland. Capresso was
founded in 1994 in the USA. Both companies have joined
forces in the US to bring you the finest Fully Automatic
Coffee Centers available anywhere. With innovative and
user-friendly features, high quality materials, clear instruc-
tions and superb customer service, we are sure you will
experience the best coffee, espresso, cappuccino or latte
you have ever had. We hope you will enjoy your new Fully
Automatic Coffee Center and will recommend it to your
friends. For more information about our products visit our
CAUTION
This appliance is for household use only. Any servicing other
than cleaning and user maintenance should be performed by
an authorized service representative.
• Do not immerse base in water or try to disassemble.
• To reduce the risk of fire or electric shock, do not remove
the base. No user serviceable parts inside. Repair should
be done by authorized service personnel only.
• Check voltage to be sure that the voltage indicated on the
name plate agrees with your voltage.
Michael Kramm, President
Customer Service
1-800-220-5701
• Never use warm or hot water to fill the water container!
Use cold water only!
• Keep your hands and the cord away from hot parts of the
appliance during operation.
Mon-Thu 9AM – 9PM • Fri 9AM – 8PM • Sat 9AM – 5PM
Eastern Standard Time.
• Never clean with scouring powders or hard implements.
email: contact@capresso.com
Jura-Capresso LLC.
81 Ruckman Road, Closter, NJ 07624
201-767-3999 • Fax: 201-767-9684
3.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Cover lid (spring loaded)
2. Bean container safety lid (Fig. 4)
3. Bean container
4. Operating panel (Fig. 3)
5. Dual coffee spout (adjustable height)
6. Hot water spout
7. Cup illumination (behind coffee spouts)
8. Used coffee container
9. Removable tray
1.
2.
3.
4.
5.
Fig. 1
18.
17.
19.
16.
15.
6.
10. Stainless steel grid
11. Removable drawer
12. Thermal milk container
13. Auto cappuccino system
14. Main power switch (Fig. 3a)
15. Water tank
7.
8.
14.
16. Water tank lid
17. Lid for ground coffee (Fig. 4)
18. Grind fineness selector (Fig. 4)
19. Lid for service connector
9.
10.
11.
Fig. 2
13.
12.
a
8. Used Coffee Container
9. Tray
d
10. Grid
11. Drawer
a. Measuring scoop
b. Cleaning tablets
c
b
c. Water hardness indicator strip
d. Clearyl Water cartridge* (unpacked)
* Attention: The Water Filter Cartridge should be in a pouch.
If your machine comes with the cartridge installed, it is not a new machine!
Call customer service 1-800-220-5701.
4.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotary
Dial
On/Off
Rinse
Main power switch
COFFEE READY
Milk
Cappuccino Special Hot
1-Cup 2-Cup 1-Cup 2-Cup
Espresso Coffee
Latte
Coffee Water
Fig. 3
Fig. 3a
Dual Fixed
Spouts
Lid for
ground
coffee
Grind
selector
Venting tip
Bean
container
safety lid
Dial
Component
Fig. 4
Fig. 5
Fig. 5a
Fig. 5b
5.
Download from Www.Somanuals.com. All Manuals Search And Download.
Milk & Froth
(Cappuccino)
Elbow hose
fits inside
straight
Milk only
(Latte)
Gap
hose
Steam only
(Rinsing)
Milk
Nozzle
Coffee
Nozzle
Fig. 5c
Fig. 5d
Fig. 5e
Fig. 5f
Fig. 6
x
Fig. 6a
Fig. 7
Fig. 8
Fig. 9
Fig. 10
6.
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
7.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter
Page
Chapter
Page
Important Safeguards..........................................................2
Jura-Capresso / Address Information.................................3
Illustrations.......................................................................4–7
9.
One-Touch Beverage Buttons.................................14
10. Brewing Coffee and Espresso..............................14
11. Overriding Strength and Cup Size during Brewing....15
12. Auto Cappuccino System .......................................15
13. Cappuccino and Latte...........................................16
14. Overriding the Cappuccino Settings.......................16
15. Hot Milk and Hot Chocolate.................................17
16. Special Coffee Button .............................................17
17. Cappuccino Rinsing Cycle......................................17
18. Cappuccino Cleaning Cycle....................................18
19. Cleaning the Dial Component .................................18
20. Using Pre-Ground Coffee .....................................19
21. Using Hot Water.....................................................19
22. Water Care...............................................................19
23. Clearyl Water Filter Cartridge...............................20
a Installing and Activating the Clearyl Cartridge ..20
1.
2.
3.
Product Warranty Registration ................................10
Operating Instructions / Customer Service.............10
WELCOME TO THE IMPRESSA Z5 .....................10
a. "Crema Coffee" and Pressure Brewing...............10
b. Different Coffee Drinks........................................11
c. Coffee Facts ........................................................11
Please Don't / Please Do ......................................11
Factory Settings ......................................................12
PREPARING MACHINE FOR THE FIRST TIME....12
a. Filling the Water Tank ..........................................12
b. Filling the Bean Container...................................12
c. Turning the Machine On......................................13
Adjusting the Grinder ..............................................14
DAILY PREPARATION............................................14
4.
5.
6.
7.
8.
b. Replacing the Clearyl Cartridge ..........................21
8.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter
Page
Chapter
Page
24. Water Hardness Monitor .........................................21
a. Changing the Water Hardness Monitor...............22
25. Changing Pre-Set Cup Sizes...................................22
25.1 1- and 2-Cup Buttons: Special Cup Button .........22
25.2 Cappuccino Button...............................................23
25.3 Milk Button............................................................23
25.4 Hot Water Button..................................................23
26. Programming / Maintenance................................23
26.1 Maintenance Programs.........................................24
26.2 Temperature..........................................................25
26.3 Coffee Strengths / Aroma.....................................25
26.4 Cappuccino Programming....................................25
26.5 Milk Programming.................................................26
26.6 Energy Saving Settings.........................................26
26.7 Actual Time...........................................................27
26.8 Auto-On ................................................................27
26.9 Auto-Off ................................................................27
26.10 Information..........................................................28
26.11 Renaming............................................................28
26.12 Language Selection............................................29
26.13 Display Settings..................................................29
27. Care and Maintenance Messages ..........................29
27.1 Fill Water Tank ......................................................29
27.2 Fill Beans ..............................................................29
27.3 Bean Cover Missing .............................................30
27.4 Empty Coffee Grounds.........................................30
28. Tablet Cleaning Process ......................................30
29. Decalcifying Process.............................................31
30. Emptying System Before Transport .......................32
31. Tips for Better Coffee .............................................32
32. Troubleshooting ......................................................33
33. Error Messages ......................................................34
34. Maintenance Supplies ..........................................34
35. Limited Warranty ....................................................35
9.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. PRODUCT WARRANTY REGISTRATION
Please read the enclosed product registration form now. Fill it
out and mail or fax it to us within two weeks after purchasing
your machine or register online through our website:
hot frothed and hot steamed milk and delivers up to 16 oz. hot
water – all with a push of a button.
The two-step pressure brewing system – well known in com-
mercial applications – was adapted and refined by Jura coffee
specialists and is the trademark of each Jura-Capresso coffee
Important: This registration is part of your warranty (chapter 35). center. This Pre-Brew Aroma-System ensures optimal coffee
extraction and will finish every cup with a rich layer of "crema" –
2. OPERATING INSTRUCTIONS / CUSTOMER SERVICE
Thank you for choosing this Jura-Capresso product.
• Please study these Operating Instructions carefully before
using your new machine. We highly recommend viewing the
enclosed DVD. Select Z5.
• Also included is a Quick Reference Guide. Keep it next to
your machine until you are familiar with all functions.
• For further information please call our TOLL FREE number:
1-800-220-5701, Mon-Fri 9AM – 9PM & Sat 9AM – 5PM
Eastern Standard Time. If you call at any other time please
leave a message including your telephone number and a time
you can be reached. You can send us a FAX at: 201-767-9684
or EMAIL us at contact@capresso.com.
proof for perfectly pressure brewed coffee and espresso. Your
Z5 grinds, tamps and brews completely automatically. The inte-
grated solid steel conical burr grinder grinds beans to the pre-
ferred fineness. A separate funnel lets you use pre-ground coffee.
All coffee, water and steam functions are programmable to your
own personal taste. Make any size cup between 1 and 16 oz.
With two stainless steel lined Thermo-Block heating systems
the Z5 is always ready to produce any kind of coffee drink with
no downtime. The hot water function lets you prepare tea and
other beverages in seconds.
All important functions such as water level, bean container,
used coffee container and water filter are monitored automatically.
You can program the machine to turn itself on and off, change
the language and check how many cups of coffee you made.
You can create your own names for any of the beverage buttons.
The beautiful, functional heavy duty die-cast metal front with its
stainless steel appointments, cup illumination and informative
LED display make the Z5 the most sophisticated and versatile
Super Automatic Coffee Center available today.
Please note: if you lose your Operating Instructions or the Quick
Reference Guide, you can download a printable copy from our
3. WELCOME TO THE IMPRESSA Z5
This fully automatic coffee/espresso/cappuccino center is com-
pletely programmable and extremely user friendly. Your Impressa
Z5 prepares a cup of cappuccino or latte at a push of a button
without moving your cup, it brews one or two cups of crema
coffee or espressos at a time, it produces unlimited amounts of
Enjoy your Impressa Z5!
3a. "CREMA COFFEE" AND PRESSURE BREWING
According to the majority of coffee experts, grinding, tamping
10.
Download from Www.Somanuals.com. All Manuals Search And Download.
and brewing under high pressure is the ideal extracting process
for maximum flavor and aroma. Your Jura-Capresso automatic
coffee center will always produce espresso and coffee with a
thick, foamy layer called "crema." The crema traps the fine aro-
matics and the light gaseous flavors that register on the palate.
The high pressure and the short brewing time prevent the
extraction of bitter oils and release less caffeine than any other
brewing method. You will always make the absolute freshest
and most aromatic cup of coffee. This is the reason why many
European restaurants and hotels serve only fresh pressured
brewed coffee. Experiment with your new machine and prepare
yourself the best and most enjoyable cup of coffee!
the result of the amount of coffee in relation to the amount of
water. The longer a bean is roasted, the less caffeine it has.
• Arabica and Robusta are two genetically different kinds of
beans. "Arabica" beans have more flavor and a little less caffeine
than "Robusta" beans which are mostly used in lower priced
coffees and instant coffees.
• Espresso is not a bean, it's the way the coffee is roasted and
prepared. Typical US espresso roasts result in darker beans with
an oily surface. European espresso roasts are medium brown
with no or very little oils on the surface.
All Display Messages Are Shown in RED
4. PLEASE, DON’T... (or you void your warranty protection):
• Never pull out the drawer during the brewing process. Only
pull the drawer when the display instructs you or when the
display shows COFFEE READY.
• Never fill instant coffee into the bean container or ground coffee
funnel; it can damage the brewing chamber.
• Never fill sugar coated coffee beans into the bean container.
• Never fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
• Never fill anything other than coffee beans into the bean
container (no chocolate, rice, nuts, spices, etc.)
• Never fill anything but fresh, cold clean water into the water
container, except when decalcifying (chapter 29).
• Never use mineral or carbonated water. You can use tap
water, bottled water, spring water, distilled water and reverse
osmosis water.
3b. DIFFERENT COFFEE DRINKS
Here are some guidelines for the most popular coffee drinks:
• Ristretto: 1/2 to 1 oz. of coffee. Sweeten to taste.
• Espresso: 1 to 2 oz. coffee. Sweeten to taste.
• Double Shot: 3 to 4 oz. of coffee. Sweeten to taste.
• Crema Coffee: 5 to 8 oz. of coffee.
• Cappuccino: Espresso plus 3 to 4 oz. of hot frothed milk.
• Latte: Espresso plus 3-5 oz. steamed milk with little or no froth.
• Café Mocha: Make Espresso then add chocolate syrup to the
milk before frothing/steaming.
TIP: Experiment with the size of your milk based drinks. For
stronger coffee taste add more coffee, for more milk taste add
more frothed milk.
3c. COFFEE FACTS
• Caffeine is tasteless. A "strong" coffee or espresso is mostly
11.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never repair or open the machine yourself. All repairs should
be performed only by an authorized service center.
Time format .................... AM/PM (chapter 26.13)
Volume ml/oz.................. in ounces (chapter 26.13)
Language ....................... English (chapter 26.12)
Time ............................... Not set (chapter 26.7)
Unit On (Auto-On) ......... Not set (chapter 26.8)
PLEASE, DO...
• Fill water tank with fresh, cold water only.
• Remove any foreign particles (small stones) from coffee beans.
• Let frozen beans thaw 3 to 4 hours before pouring them into
the bean container.
CUP ILLUMINATION (Fig. 1,7)
The cup illumination adds a dramatic touch to brewing coffee.
Providing the main power switch is on, you can activate the cup
illumination for 1 minute by pressing any button.
5. FACTORY SETTINGS
Each machine leaves the factory with the following settings:
Milk Button..................... 20 seconds
Cappuccino Button ........ 15 seconds milk, 3 oz. coffee, strength
NORMAL, temperature HIGH:
Special Coffee Button.... 3 oz., XSTRONG, HIGH
Hot Water Button ........... 6 oz.
1 Espresso Button.......... 1.5 oz., STRONG, HIGH
2 Espresso Button.......... 3.0 oz., STRONG, HIGH
1 Coffee Button.............. 5.0 oz., NORMAL, HIGH
2 Coffee Button.............. 10.0 oz., NORMAL, HIGH
6. PREPARING THE MACHINE FOR THE FIRST TIME
• Make sure all accessories, literature and any other items are
removed from the bean container and the water tank.
• DO NOT install the Clearyl water filter now. (chapter 23)
• Make sure the machine sits on an even, flat surface and the
drawer, tray and used coffee container are inserted (Fig.1, Fig. 2).
• Plug-in machine.
6a. FILLING THE WATER TANK
Please note: Only use fresh, cold water. Never fill water tank
with carbonated water, milk or any other liquid.
• Open the Water Tank Lid, remove the water tank, rinse and fill
with fresh, cold water (Fig. 7).
• Replace water tank and make sure that the two slots are
engaged over the two hooks to secure the tank properly.
• Close lid.
Please note: You can change all above presets (chapter 26).
You can also override the strength and the cup size before/during
actual brewing. Overriding will not change the preset values.
Filter................................ No (not installed) (chapter 23)
Hardness Level............... 10º (chapter 24)
Auto-Off.......................... 2 Hours (chapter 26.9)
Grinder Fineness ............ Middle position (chapter 7)
Economy ........................ NO SAVE (chapter 26.6)
6b. FILLING THE BEAN CONTAINER
Please note: To insure that your conical burr grinder will work
for a long time, do not use it with any kind of coated or flavored
12.
Download from Www.Somanuals.com. All Manuals Search And Download.
beans (all coating and flavors contain sugar or sugar substances).
not change the taste of your coffee). Then fill the beans into the
Such coating can damage the burrs. Using such beans voids the bean grinder. Now beans will feed into the burrs more easily.
warranty. Have your coffee store grind the sugar coated beans
and use as described in the ground coffee funnel (chapter 20).
Please note: If you like flavored coffees we recommend to add
flavors to your coffee after brewing. This way you can use your
6c. TURNING THE MACHINE ON
• Press the Main Power Switch at the bottom left in front of
the power cord (Fig. 3a). The On/Off button on top of the
machine illuminates (Fig. 3).
regular coffee beans in the bean container. Adding the flavors
• Push the On/Off button on top of the machine. The display
after brewing lets you control the intensity much better than with
will illuminate. PRESS RINSE. The Rinse Button (Fig. 3)
illuminates in blue.
• Place one cup underneath the Hot Water Spout (Fig. 1,6) and
pre-flavored coffee. Your local coffee store typically carries a
variety of flavors.
one cup underneath the Auto Cappuccino System (Fig. 1,13).
• Push the Rinse Button. SYSTEM FILLS. The machine starts
pumping water into the system, until some water will come
through the cappuccino nozzle and the hot water spout.
During this operation the Rinse Button flashes.
WELCOME TO JURA
UNIT IS HEATING
PRESS RINSE
• Place a cup underneath the Dual Coffee Spouts (Fig. 1,5) and
push the Rinse Button. The machine will pump a bit of hot
water through the coffee spouts and will stop automatically.
COFFEE READY
• Open the Cover Lid (Fig.1,1).
Please note: The cover lid is spring activated. Push slightly
upwards on the right side finger indent and the lid will auto-
matically open.
• Remove the see-through Bean Container Safety Lid (Fig. 4).
Make sure the bean container is empty and clean. Fill beans
into the bean container. Replace the Safety Lid.
Attention: the machine will not work without the Safety Lid in
place. Close the Cover Lid.
Frozen Beans: Thaw 3 to 4 hours before adding to bean
container. This prevents moisture from seeping into the grinder.
Oily Beans: Beans with an oily surface tend to stick together.
This may prevent a continuous flow of beans from the bean
container into the burrs. As a result the grinder does not grind
enough coffee and you might get weak or no coffee at all.
Stir the beans in the bean container just before grinding.
Alternatively, you can also pour the beans in an open bowl and
let them sit for about 5 hours. The oils will evaporate (this will
• Place a cup underneath the Dual Coffee Spout and push the
1-cup Espresso Button (Fig. 3). The machine starts grinding
and brewing. The display might show FILL BEANS.
• Push the 1-cup Espresso Button again. Discard the first two
cups of coffee. Your next cup will be perfect.
Important: After the initial set up we recommend to leave the
Main Power Switch on for the next 24 hours. This will give the
13.
Download from Www.Somanuals.com. All Manuals Search And Download.
Z5 enough time to completely charge its internal back-up battery.
When fully charged, the internal battery will back up the clock for
up to eight weeks.
9. ONE-TOUCH BEVERAGE BUTTONS (Fig. 3)
The Z5 has eight beverage buttons. The first three buttons on
the left side produce beverages coming out of the Auto-
Cappuccino-System on the left side of the machine.
The forth button on the left side produces hot water through the
hot water spout (Fig.1,6).
The four buttons on the right side produce different kinds of
coffee beverages through the Dual Coffee Spout in the middle.
All beverage buttons are pre-set to certain volumes and
strengths (chapter 5).
7. ADJUSTING THE GRINDER
You can adjust the grinder to the roast of your coffee.
We recommend the following:
Light roast: use a finer adjustment.
Dark roast: use a coarser adjustment.
• Open the Cover Lid (Fig. 1,1)
• While the grinder is running, turn the Grind Selector to
the desired position (Fig. 4).
Coarser: Turn the dial towards the bean symbol.
Finer: Turn the dial away from the bean symbol.
Important: The grinding grade can only be adjusted while
the grinder is actually grinding.
10. BREWING COFFEE AND ESPRESSO
(1 Espresso, 2 Espressos, 1 Coffee, 2 Coffees)
The four buttons on the right side of the Operating Panel (Fig. 3)
deliver coffee through the Dual Coffee Spouts (Fig. 1,5).
• Place one or two cups underneath Dual Coffee Spouts and
push the desired button.
The Impressa Z5 will grind, tamp and then brew the coffee. It
uses a 2-step brewing process (Pre-Brew Aroma System).
First, it moistens the ground coffee (pre-brew phase), pauses
for a few seconds, and then starts the brewing process. The
display will show the name of the button you pushed, e.g.
1 ESPRESSO and then the strength which was programmed
for this button, e.g. STRONG. The brewing process stops
automatically as soon as the programmed volume of coffee is
produced. When the display shows COFFEE READY you can
brew the next cup of coffee.
8. DAILY PREPARATION
We recommend filling the water container every morning with
fresh, cold water. This will enhance the taste of your coffee.
• Make sure the Main Power Switch is on (Fig. 3a). In this case
the On/Off button on top is illuminated.
• Push the On/Off button on top of the machine. The display
shows MACHINE IS HEATING. After approx. 2 minutes the
display shows RINSE.
• Push the Rinse Button (Fig. 3). Hot water will warm up all
internal parts and pump through the coffee spouts. The water
will be caught in the drawer underneath. The rinse cycle stops
by itself and the display reads: COFFEE READY. You are now
ready to make coffee.
Very Important: After the brewing stops the Z5 will discard the
used coffee. Please do not try to pull out the drawer (Fig. 2)
during this time. It can seriously damage the machine. There
14.
Download from Www.Somanuals.com. All Manuals Search And Download.
is no need to pull out the drawer unless you see the message
EMPTY GROUNDS (chapter 27.4).
per cup, e.g. if you choose 7 oz. the Z5 will actually brew a total
of 14 oz.
Please note: You can always stop the brewing process by
pressing the Rotary Dial or any of the eight beverage buttons.
This will not affect the pre-set values.
Example: The 1-cup Espresso button is programmed to
STRONG and approx. 1.5 OZ.
Assume you want to use this button to make a MILD 4 oz. cup.
COFFEE READY
• Turn the Rotary Dial until the display shows MILD, push the
1-cup Espresso button. The Z5 starts grinding and displays MILD.
• When it starts brewing, turn the Rotary Dial until the display
shows 4.0 OZ.
11. OVERRIDING STRENGTH AND CUP SIZE DURING
BREWING.
With the Z5’s override feature you are always able to change
certain settings just before brewing without affecting the pre-set
values. This is a great feature if you are in the mood for a different
kind of coffee which is not programmed. (For changing pre-set
values see chapter 25 and 26).
The next time you use the 1-cup Espresso button it will produce
the pre-set value STRONG, 1.5 oz..
For the four coffee buttons on the right side, you can override
the strength and the coffee volume.
COFFEE READY
12. AUTO CAPPUCCINO SYSTEM
The three buttons on the left side of the operating panel produce
beverages which are brewed through the Auto Cappuccino
System (Fig. 1,13). We recommend watching the DVD.
• First turn the Rotary Dial. It will display five different strength
settings XMILD, MILD, NORMAL, STRONG, XSTRONG.
• Select the one you like and then push one of the four coffee
buttons. Once you pushed the coffee button, the display will
again show the strength setting you just selected.
• You can now change the coffee volume.
• Turn the Rotary Dial and the display will show the coffee volume
in oz. Turn the dial until the desired volume is set.
Please note: When you select a different strength you must
push one of the coffee buttons within the next 3 seconds,
otherwise the Z5 reverts back to COFFEE READY.
Please note: When you push one of the double cup buttons and
you change the volume, the display will always show the volume
The Auto Cappuccino System has the following components:
• Dual fixed spouts coming out of the machine, (Fig. 5).
• Dial Component with the small removable venting tip (Fig. 5a).
• The removable Dual Nozzle system. The long system is already
attached to the machine. If you use tall cups or glasses you
can replace the long Dual Nozzle System with a shorter one
(Fig. 5b). It is included in the Welcome Pack.
The nozzle that is positioned closer to the machine will deliver
coffee, this is called the Coffee Nozzle (Fig. 5e). The nozzle in
the front will deliver hot steamed and frothed milk, this is
called the Milk Nozzle (Fig. 5e).
15.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please note: There is a gap between the Coffee Nozzle and
the fixed coffee spout. (Fig. 5e) This is necessary to assure
proper coffee flow.
MILK 15 SEC.
Hot frothed milk is automatically delivered into your cup.
Frothing stops automatically.
Please note: The Milk Nozzle should always be tightly connected
to the Dial Component (Fig. 5e) and the venting tip needs to
be clean and inserted to assure proper frothing action (Fig. 5a).
3 OZ. NORMAL. Now the Z5 automatically adds high pressure
brewed coffee and then stops automatically.
COFFEE READY
Tip: If you use a glass cup you can actually see how much froth
is created and how the coffee goes through the froth and sits
underneath the layer of milk froth. Slightly stir to distribute the
coffee evenly into the hot milk.
• A Thermal Milk Container with lid (Fig. 6a).
• Two stainless steel rods and two flexible hoses (Welcome Pack).
13. CAPPUCCINO AND LATTE
Make sure the Auto-Cappuccino-System is installed properly
(Fig. 5a – 5e).
14. OVERRIDING THE CAPPUCCINO SETTINGS
As with the other buttons you can always override the pre-sets
of the cappuccino button.
• Fill cold milk into the Thermal Milk Container and assemble the
two stainless steel rods with the lid as shown in Fig. 6 .
Example: Let’s override
• Attach the short flexible hose to the rod and insert the connector
into the Dial Component (Fig. 6a).
– the coffee strength from NORMAL to XSTRONG,
– the milk frothing time from 15 seconds to 10 seconds,
– the coffee volume from 3 OZ to 2 OZ.
Cappuccino: The Dial points to the cup with saucer. Hot milk
COFFEE READY
and milk froth will be created (Fig. 5f).
• Place a cup underneath the Dual Nozzle System.
• Turn the Rotary Dial until the display shows XSTRONG.
• Push the Cappuccino button.
• When the display shows MILK 15 SEC, turn the Rotary Dial
until the display shows 10 SEC.
• When the coffee starts brewing turn the Rotary Dial again until
the display shows 2 OZ.
Please note: You can stop frothing by pushing any of the bever-
age buttons or the Rotary Dial. The Z5 will stop frothing and will
start brewing the coffee. You can stop the coffee brewing in the
same way.
Latte: The Dial points to the tall glass. Hot steamed milk with no
or very little froth will be created.
COFFEE READY
• Place a cappuccino cup underneath the Dual Nozzle System.
The cup should have at least a 8 oz. capacity. Make sure the
dial points to the cappuccino setting (Fig. 5f).
• Push the Cappuccino Button (Fig. 3).
CAPPUCCINO
The Z5 begins grinding the coffee and at the same time starts
siphoning the cold milk.
16.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please note: Cold milk will stay fresh up to 8 hours in the thermal
milk container. Do not leave the milk sitting outside the refrigerator
over night.
Please note: If there is not enough milk in the milk container, the
frother nozzle will dispense steam only. Stop the frothing action
and refill the milk container.
Please note: If the Dial points to the cappuccino position and
you do not get froth on your milk, check the following items:
a. Make sure all connections are tight.
b. Remove the venting tip (Fig. 5a) and squeeze the bottom part.
Milk might have closed the venting lip. Replace venting tip.
c. Skim milk will create considerably more froth than regular
milk. Soy milk will produce very little froth.
16. SPECIAL COFFEE BUTTON
COFFEE READY
• Place a cup under the Auto Cappuccino System.
Make sure the long or the short nozzle system is installed.
• Push the SPECIAL COFFEE button (Fig. 3). The Z5 will brew a
cup coffee from the back nozzle and will stop automatically.
This button is useful if you want to create special milk drinks
that are not pre-set with any of the other buttons.
• As explained in chapter 11, you can change the strength and
the volume for this button, just before brewing.
17. CAPPUCCINO RINSING CYCLE CAPPU RINSE
Ten minutes after using the milk or the cappuccino buttons, the
display will show the messages CAPPU RINSE, COFFEE
READY, CAPPU RINSE and so on. At the same time the Rinse
Button will illuminate.
• Place a cup underneath the Auto Cappuccino System.
• Turn the Dial all the way down to the steam position (Fig. 5f).
• Push the rinse button. CAPPUCCINO RINSING. For a few
seconds the Z5 will push hot water through the Dual Nozzle
System to remove any milk deposits.
15. HOT MILK AND HOT CHOCOLATE
The Milk Button (Fig. 3) lets you produce hot milk or hot chocolate.
• Connect the long hose to the Dial system and insert the other
end into the container with cold milk or cold chocolate milk.
• Set the Dial to the cappuccino or the latte setting.
• Place a cup underneath the Auto Cappuccino System.
COFFEE READY
COFFEE READY
• Push the Milk Button
• Turn the selector switch back to the Cappuccino or Latte position.
Please note: If the CAPPU RINSE message appears and you
do not plan to use the milk or cappuccino button within the next
few minutes, we highly recommend to run this rinse cycle without
delay. Warm milk inside the dual nozzle will deteriorate within a
short period of time and milk fats can create foul smells.
Please note: You can also perform a cappuccino rinsing cycle
manually using maintenance menu (chapter 26.1).
The display shows MILK 20 SEC. The Z5 will produce hot milk
for 20 seconds and then stop automatically.
You can always change the duration by turning the Rotary Dial.
You can stop the milk flow by pushing the Rotary Dial or any
beverage button.
Tip: Without moving the cup you can now add coffee using the
Special Coffee Button. .
17.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please note: When you are finished using the cappuccino feature
for the day please proceed as follows:
a. Remove the Thermal Milk container and place in the refrigerator.
b. Remove the flexible hose on both ends and clean with hot water.
c. Pull off the Dial component and the Dual Nozzle and rinse
under warm water.
MAINTENANCE section.
• Turn the Rotary Dial. It will offer you a choice of the following
maintenance programs:
RINSE UNIT
CAPPUCCINO CLEANING
CLEAN UNIT
CAPPUCCINO RINSING
DECALCIFY UNIT
18. CAPPUCCINO CLEANING CYCLE
Milk contains fatty acids. Hot water alone may not always
remove milk fats completely. If you use the cappuccino feature
frequently or if you use the Z5 for commercial purposes we highly
recommend to perform this cleaning cycle daily. It will take less
than two minutes.
Please note: the Z5 will not prompt you to run this special cycle.
You need to activate the cycle through the maintenance menu.
One bottle of the solution is enclosed with your Z5. It will last
for approximately 20 cleaning cycles. For additional supplies see
chapter 34.
COFFEE READY
• Fill a container with approx. 6 oz. of water and add one cap of
the Cappuccino Cleaner (15ML or 1/2 oz.).
• Connect the long hose to the Dial component and insert the
other end into the container with the cleaning liquid (Fig. 15).
Make sure that the Dial points to the Latte or Frothing position
(not the steaming position!) (Fig. 5f).
• Place a container which can hold at least 12 oz. under the
Dual Nozzle System.
EXIT
• Select CAPPUCCINO CLEANING and push the Rotary Dial.
The Rinse Button will illuminate.
CLEANER FOR CAPPUCCINO PRESS BUTTON.
• Since we have added the cleaner already, Press the Rinse
Button. The Z5 will siphon the cleaning solution through the
Milk Nozzle. It will run two short cycles and it will stop.
WATER FOR CAPPUCCINO PRESS BUTTON.
• Remove the container with the cleaning solution and fill with
fresh clean water (about 6 oz.)
• Replace and insert the hose.
The rinse button illuminates. Press the Rinse Button.
The Z5 will run one short fresh water cycle through the Milk
Nozzle and the display will return to COFFEE READY.
19. CLEANING THE DIAL COMPONENT
We recommend to regularly disassemble the Dial Component
and rinse under warm water (Fig. 5a).
Make sure the venting tip (Fig. 5a) is always clean and free of
milk deposits.
• Push and hold the Rotary Dial until you hear a beep.
The display shows FILTER.
• Turn the Rotary Dial until the display shows MAINTENANCE.
• Push the Rotary Dial to confirm that you want to go into the
NOTE: Should you lose the venting tip, you will find a spare one
included in the Welcome Pack.
18.
Download from Www.Somanuals.com. All Manuals Search And Download.
20. USING PRE-GROUND COFFEE
the program RINSE UNIT in the maintenance section to run
You can also use pre-ground coffee, bypassing the grinder. This
comes in handy if someone requests decaf coffee or a decaf
cappuccino. You can also use the pre-ground funnel for ground
flavored coffee.
Please note: Never fill the funnel with instant coffee. Do not fill
the funnel with more than two scoops. The funnel is not a
storage container. If coffee is ground too fine it might be processed
very slowly or the Z5 will interrupt the process altogether.
some hot water through the coffee spouts (chapter 26.1)
21. USING HOT WATER
The Z5 can produce up to 16 oz. of hot water. This is great if you
want to produce a hot cup of tea or instant soup or if you want
to add some hot water to your coffee.
COFFEE READY
• Place a cup underneath the Hot Water Spout (Fig. 1,6)
• Push the Hot Water Button (Fig.3). The display shows HOT
WATER PORTION.
The pre-set is 6 oz. You can change the hot water volume during
brewing by turning the Rotary Dial. You can always stop the hot
water output by pushing any of the beverage buttons.
COFFEE READY
• Place one or two cups under the Dual Coffee Spouts or the
Auto Cappuccino System. Open the Cover Lid and then open
the Lid for Ground Coffee (Fig. 4). Opening this lid automati-
cally disengages the grinder. The display shows PRE-GROUND
FILL POWDER.
• Add one or two level scoops of pre-ground coffee into the funnel
and close the lid Fig. 12). The display shows PRE-GROUND
SELECT PRODUCT.
22. WATER CARE
Water is heated inside the Z5. With use, this leads to calcium
deposits forming inside the machine. With the Z5 you have the
following options to take care of the water:
Most convenient: Clearyl Water Filter Cartridge (chapter 23).
Least expensive: Decalcifying System (chapter 24 and 29).
Your Z5 is pre-set in the factory to automatically remind you to
decalcify based on a water hardness of 10º DH = 13 grains. You
can change the water hardness setting to comply with the water
you are using (chapter 24).
Please note: The Z5 will automatically remind you when it is
necessary to run certain water maintenance programs. It is
important that you follow those instructions. Otherwise your Z5
might break down.
• Push any of the six coffee producing buttons. The Z5 will brew
the selected beverage. During brewing you can still change the
coffee volume by turning the Rotary Dial.
COFFEE READY
Please note: If you inadvertently opened the lid for the coffee
funnel, just close it. The Z5 will detect that there is no coffee in
the funnel. The display will show PRE-GROUND NOT ENOUGH
and will return to COFFEE READY.
Please note: After use of sugar coated or flavored coffee
through the pre-ground coffee funnel you may experience some
flavor transfer when switching back to your regular coffee. Select
19.
Download from Www.Somanuals.com. All Manuals Search And Download.
23. CLEARYL WATER FILTER CARTRIDGE
Activating:
The machine comes with one Clearyl Water Filter Cartridge. The
Clearyl cartridge
• Reduces the water hardness up to 75%.
You must activate the cartridge otherwise the Z5 cannot monitor
it properly and assumes that the machine is still in decalcifying
mode.
• Removes (if present) up to 85% chlorine, up to 90% lead, up
to 95% copper and up to 67% aluminum.
• Cleans the water through an upward current principle (Fig. 9)
just before the brewing cycle starts, ensuring freshly filtered
water every time you make coffee.
• Eliminates decalcifying except when using very hard water
(25 grains or higher), see chapter 24. In this case we recom-
mended to decalcify the Z5 once or twice a year.
• To reorder cartridges, see chapter 34.
COFFEE READY
• Push the Rotary Dial until you hear a beep.
FILTER NO
• Push the Rotary Dial again, to enter the FILTER program.
• Turn the Rotary Dial until the display shows FILTER YES and
push the Rotary Dial to confirm. The display shows INSERT
FILTER PRESS BUTTON and the Rinse Button illuminates.
• Place a 20 oz. container under the Auto Cappuccino System.
• Push and hold the Rinse Button until the display shows
FILTER RINS. For the next 90 seconds the Z5 will push
water through the cartridge and out through the milk nozzle.
Initially, the water may have a slight discoloration. The program
will stop automatically. The display shows UNIT IS HEATING
and then COFFEE READY.
23a. INSTALLING & ACTIVATING THE CLEARYL WATER
CARTRIDGE
Installing:
Important: Never install the cartridge before or during
"Preparing Machine For The First Time" (chapter 6).
Please note: If your container is not large enough, you can
• Remove cartridge from its bag and rinse cartridge under water. interrupt the activation cycle by simply pressing any beverage
• Add the extension rod to the cartridge (Fig.8).
• Remove the water tank, make sure it is empty.
• Pull up the cartridge holder and insert the cartridge with its
tapered end down (Fig. 10). Make sure it fits securely over the
white mesh piece inside the water container. Push down
gently (Fig. 11).
button. The display shows PRESS BUTTON and the Rinse
Button is still illuminated. Replace the empty container and
continue the filter activation by pressing the Rinse Button.
Please note: As long as the filter is activated, the water
hardness setting is automatically turned off.
• Close the cartridge holder. Make sure the holder snaps into
place.
• Fill the water tank with fresh cold water and replace.
IMPORTANT: Do not let the filter dry out.
If you do not use your IMPRESSA for more than three days in a
row and you still have an active filter, we recommend the follow-
ing easy procedure: Empty the water tank, remove the filter and
20.
Download from Www.Somanuals.com. All Manuals Search And Download.
immerse it at least to a third of its length into a cup with cold
water. Store the cup in the refrigerator. This way the filter does
not dry out. When you use your machine again, install the filter.
Use the hot water cycle and let approx. 16 oz. of water run
through the system. Initially the water may be slightly discolored
• Push and hold the Rinse Button until the display shows
FILTER RINS. For the next 90 seconds the Z5 will push
water through the cartridge and out through the milk nozzle.
Initially, the water may have a slight discoloration. The program
will stop automatically. The display shows UNIT IS HEATING
and then COFFEE READY.
23b. REPLACING THE CLEARYL WATER CARTRIDGE
The filter is monitored automatically. After approx. 75 liters of
water (~2,500 oz.) the display shows COFFEE READY and
FILTER-CHANGE. The Rinse Button will light up.
Please note: We recommend to set the time (chapter 26.7). If
you have not used 75 liters of water in three months, the filter
monitor will indicate that a filter change is necessary.
Important: Once the filter has lost its calcium suppressing
abilities, calcium will build up inside the machine. Since the
Water Hardness Selector is off, the machine will not remind you
when to decalcify. This could clog and ruin your machine.
• Push the Rinse Button. INSERT FILTER PRESS BUTTON.
24. WATER HARDNESS MONITOR
If you do not use the Clearyl Filter Cartridge (chapters 23 – 23B.)
the Z5 will remind you when it is time to perform a decalcifying
cycle. The machine is set to medium hard water. If you have
harder water you need to set it to a higher level. If you have soft-
er water you can set it to a lower level. If you are not sure about
the hardness of your water, ask your local water company for the
"Water Hardness in Grains." The Z5 will show you the water
hardness in the German hardness scale (which is a bit different
from the American "Grain" scale (see chart below).
You can also use the enclosed water hardness indicator strip to
determine the water hardness:
• Remove the old filter and set the extension rod aside. The
used filter cartridge is environmentally friendly and can be
disposed with your regular household trash.
• Insert the stick for one second into the water you want to
use. Shake off any access water and wait for one minute.
Important: Keep the Extension Rod
• If all five fields of the test stick turn reddish, set the hardness
level to 5 squares. If four fields turn reddish, set the hardness
level to 4 squares and so on.
• Make sure the water tank is empty.
• Remove the new cartridge from its bag and rinse under
running water. Now install as explained in chapter 23A.
Please note: If you use Spring Water or Bottled Water you can
set the hardness level to 1, "extremely soft water".
• Place a 20 oz. container under the Auto Cappuccino System.
21.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Z5 will give you the following options:
• Push the Rotary Dial to confirm the setting.
• Turn the Rotary Dial until the display shows EXIT.
• Push the Rotary Dial.
Display Equivalent Indicator Strip
German American number of
Degree Grains "reddish" fields
COFFEE READY
Level
Display
The Z5 will automatically remind you when it is time to decalcify
(chapter 29).
Not Active*
1. extremely soft water
2. soft water
3. medium water
4. hard water
5. very hard water
6. extremely hard water
Not Active
—
1-4
5-9
—
1-5
6-11
—
None
1 to 2
■
■
■■
■■■
■■■■
■■■■■
25. CHANGING PRE-SET CUP SIZES
Each beverage button has been set to certain values (pre-sets).
See chapter 5. You can change all pre-set values and enter ones.
10-14 13-18 2 to 3
15-19 19-24 3 to 4
20-24 25-30 4 to 5
25 +
32 +
All 5
25.1 1-AND 2-CUP BUTTONS; SPECIAL CUP BUTTON
This procedure is the same for all five coffee buttons (Fig. 3).
COFFEE READY
EXAMPLE: Changing the 1-cup Coffee Button. (Fig.3).
• Place a cup underneath the coffee spouts.
• Push and hold the 1-cup Coffee Button until the display
shows ENOUGH? PRESS BUTTON.
• When the coffee volume in your cup is at the new desired
level, push the 1-cup Coffee Button again. The display shows
CONFIRMED ✔
*Not Active: You can only use this setting for distilled water.
Level 5 and Level 6: If your tab water is very hard and falls into
these two categories, decalcifying will be frequent. In this case
bottled water is recommended.
Please note: If your water has a high calcium content (level 5 or 6)
and you use the Clearyl Filter Cartridge we recommend to decalcify
the Z5 once or twice a year (chapter 26.1).
COFFEE READY
From now on, this will be the amount of coffee the Z5 will produce
when you push this button.
Please note: the 1-cup and 2-cup buttons are independent of
each other. This means if you pre-set the 1-cup coffee button to
4 oz. the 2-cup button does not automatically produce 8 oz. You
can pre-set the 2-cup button completely independent.
Please note: when changing the volume for the special cup
button, place a cup under the auto cappuccino system.
24a. CHANGING THE WATER HARDNESS MONITOR
COFFEE READY
• Push the Rotary Dial until you hear a beep.
FILTER
• Turn the Rotary Dial until the display shows
HARDNESS 10º DH
• Push the Rotary Dial to enter the program.
• Turn the Rotary Dial until desired hardness level is displayed.
22.
Download from Www.Somanuals.com. All Manuals Search And Download.
25.2 CAPPUCCINO BUTTON
25.4 HOT WATER BUTTON
You can change the pre-set volumes for milk and coffee. This
allows you to adjust the volume exactly to your cup size.
Place a cup underneath the auto cappuccino system.
COFFEE READY
• Push and hold the Cappuccino Button until the display reads
ENOUGH MILK PRESS BUTTON.
• Once you have enough frothed milk in your cup, push the
Cappuccino Button again. Now the Z5 starts brewing the coffee
and the display shows ENOUGH? PRESS BUTTON.
• Once enough coffee has been added to your cappuccino,
press the Cappuccino Button again. The display shows
CONFIRMED ✔
You can change the pre-set hot water amount.
• Place a cup underneath the hot water spout.
COFFEE READY.
• Push and hold the Hot Water Button until the display reads
ENOUGH WATER PRESS BUTTON.
• Once you have enough hot water in your cup push the Hot
Water Button again. The display shows CONFIRMED ✔.
COFFEE READY
26. PROGRAMMING / MAINTENANCE
The Z5 provides programming, maintenance and look-up func-
tions. With the display at COFFEE READY you can access
these functions as follows:
COFFEE READY
Please note: You can also change the pre-set parameters for
the cappuccino button in programming (chapter 26.4)
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
The Z5 offers the following Functions (see adjacent chart)
Turn the dial clockwise slowly to scroll through Functions.
Please note: to get back to COFFEE READY, turn the Rotary
Dial until the display shows EXIT, then push the Rotary Dial.
25.3 MILK BUTTON
You can change the pre-set milk volume.
• Place a cup underneath the Auto Cappuccino System.
COFFEE READY
• Push and hold the Milk Button until the display reads
ENOUGH MILK PRESS BUTTON.
Function
Display
Comment
Chapter
Clearyl Water Filter FILTER NO or
FILTER YES
Install and activate the
Clearyl Filter
23A
• Once you have enough frothed milk in your cup push the Milk
Button again. The display shows CONFIRMED ✔.
COFFEE READY
Please note: You can also change the pre-set parameters for
the milk button in programming (chapter 26.5)
Water Hardness
(if FILTER is set to
YES, this function
is suppressed)
HARDNESS
Change water hardness
(when not using the
Clearyl Filter)
24A
23.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Display
Comment
Chapter
Function
Display
Comment
Chapter
Maintenance
MAINTENANCE Activate maintenance
programs outside the
26.1
Renaming
display message
RENAME
Rename the beverage
buttons, the "on" and "off"
messages
26.11
automatic prompts
Temperature
TEMPERATURE Choose for each of the
six coffee buttons from
26.2
26.3
Language
Display
LANGUAGE
DISPLAY
Change the display to
another language
26.12
26.13
three temperature settings
Choose cup size info. in
OZ. to ML. Choose time
display in 24HRS or
AM/PM mode
Coffee Strength
AROMA
Choose for each of the six
coffee buttons from five
different strength settings
Cappuccino
Milk
CAPPUCCINO Change the pre-set values
for milk time and coffee
volume
26.4
26.5
Exit programming EXIT
The only way to get back
to COFFEE READY
26.1 MAINTENANCE PROGRAMS
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows:
MAINTENANCE
• Push and turn the Rotary Dial to select from the following
Maintenance Programs:
MILK
Change the pre-set value
for the milk time
Comment
Choose from three
Function
Energy Saving
Display
ENERGY
Chapter
26.6
power saving modes
Function
Display
Comment
Chapter
Time
TIME
Set actual time
26.7
Auto-On
Auto-Off
UNIT ON
Choose an auto-on time
26.8
26.9
RINSE UNIT
CAPPUCCINO CLEANING
CHANGE FILTER (this program will only show up if FILTER is
set to YES)
OFF AFTER
Choose an auto-off time
after last use
CLEAN UNIT
CAPPUCCINO RINSING
DECALCIFY UNIT.
Information
INFORMATION Check performance and
a variety of settings
26.10
24.
Download from Www.Somanuals.com. All Manuals Search And Download.
To activate one of the above programs, push the Rotary Dial
and follow the instructions on the display.
Please note: If you do not select any of the Maintenance
Programs, the display will return to COFFEE READY.
26.3 COFFEE STRENGTH / AROMA
You can set the coffee strength for the Cappuccino Button, the
Special Coffee Button and the four coffee buttons on the right
side to XMILD, MILD, NORMAL, STRONG, XSTRONG. For
factory settings see chapter 5. In XMILD the 1-cup buttons
grind for about 4 seconds, in XSTRONG for about 8 seconds.
The 2-cup buttons grind between 7 and 10 seconds respectively.
The minimum amount of coffee to be ground is approx. 5 grams,
the maximum approx. 16 grams.
26.2 TEMPERATURE
You can set the coffee temperature for the Cappuccino Button,
the Special Coffee Button and the four coffee buttons on the
right side to LOW, NORMAL or HIGH. The factory setting for
these buttons is HIGH. The temperature difference between
LOW and HIGH is approx. 7º F.
Please note: the temperature also depends somewhat on the
fineness setting of the grinder (chapter 7). The finer the grind the
slower the water will pass through the coffee causing it to get
somewhat hotter.
Changing the temperature:
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows:
Please note: the amount of ground coffee also depends on the
fineness settings of the burr grinder. The coarser the setting the
more coffee is ground through the burrs.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows: AROMA
a. Push the Rotary Dial. SELECT PRODUCT.
b. Push the beverage button for which you want to change the
coffee strength, e.g. the 2-cup Coffee Button. The display
shows 2 COFFEE NORMAL.
c. Turn the Rotary Dial and select XSTRONG.
d. Push the Rotary Dial to confirm. CONFIRMED ✔
e. AROMA. To change another beverage button start with a.
TEMPERATURE
a. Push the Rotary Dial. SELECT PRODUCT.
b. Push the beverage button for which you want to change the
temperature, e.g. the 1-cup Espresso Button. The display
shows 1 ESPRESSO HIGH.
c. Turn the Rotary Dial and select NORMAL (example).
d. Push the Rotary Dial to confirm. CONFIRMED ✔
e. TEMPERATURE. To change another beverage button start
with a. again.
26.4 CAPPUCCINO PROGRAMMING
Chapter 25.2 explains how to change the pre-sets for milk and
the coffee volume while the Z5 is brewing. In programming you
can simply change the pre-sets by changing the values shown in
the display without making the beverage.
25.
Download from Www.Somanuals.com. All Manuals Search And Download.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
c. Push the Rotary Dial to confirm. CONFIRMED ✔
Now the display shows MILK 30 SEC.
d. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
• Turn the dial until the display shows: CAPPUCCINO
a. Push the Rotary Dial. The display shows MILK 15 SEC
b. Turn the Rotary Dial until the desired duration is displayed,
e.g. MILK 20 SEC.
c. Push the Rotary Dial to confirm. CONFIRMED ✔.
Now the display shows COFFEE 3 OZ.
d. Turn the Rotary Dial until the desired coffee volume is
displayed, e.g. to COFFEE 5 OZ.
e. Push the Rotary Dial to confirm. CONFIRMED ✔
Now the display shows CAPPUCCINO MILK 20 SEC.
f. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
26.6 ENERGY SAVING SETTINGS
The factory setting is SAVE NO.
Two other settings are possible: SAVE LEVEL 1 and SAVE
LEVEL 2.
SAVE NO:
The Z5 is always in immediate stand-by mode. You can make
coffee and steam and froth milk without delay as long as the
machine is on.
SAVE LEVEL 1:
The Z5 is in constant stand-by mode for coffee and in energy
saving mode for steam.
COFFEE READY
26.5 MILK PROGRAMMING
If the Z5 is mostly used for coffee this setting will consume less
energy. When using the cappuccino or milk button, the Z5 will
first heat up for about 30 seconds and then prompt you again.
SAVE LEVEL 2:
Five minutes after last use, the Z5 will lower the stand-by
temperature to economy. When making coffee at a later time,
the machine will first heat up for up to 30 seconds.
Chapter 25.3 explains how to change the pre-sets for milk
volume while the Z5 is brewing. In programming you can simply
change the pre-set by changing the duration shown in the
display without using any milk
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows: MILK
a. Push the Rotary Dial. The display shows MILK 20 SEC
b. Turn the Rotary Dial until the desired duration is displayed,
e.g. MILK 30 SEC.
This setting will save energy if you prepare only a few coffees or
cappuccinos in large intervals. It is still much faster than turning
the machine on every time you want to make coffee.
COFFEE READY
26.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows: ENERGY SAVE NO.
a. Push the Rotary Dial.
b. Turn the Rotary Dial until the desired setting shows up, e.g.
SAVE LEVEL 1.
COFFEE READY.
Please note: For Daylight Saving you have to re-set the time.
Please note: When fully charged, the built-in back up battery will
keep the clock running for up to eight weeks in case the Z5 is
unplugged or the main power switch on the left side is turned off.
c. Push the Rotary Dial to confirm. CONFIRMED ✔
Now the display shows ENERGY SAVE LEVEL 1.
d. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
26.8 AUTO-ON
You can set a time at which the Z5 turns itself on. This way you
don’t have to wait for the machine to warm up. Just run one 10
second rinse cycle and you are ready for your first cup of coffee.
First you need to set the actual time (chapter 26.7).
COFFEE READY
COFFEE READY
26.7 ACTUAL TIME
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
Setting the time allows you to program an auto-on time. Also,
when using the Clearyl Filter, the Z5 will indicate a filter change
after approx. 3 months if you do not use 75 liters of water within
that period.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows: TIME
a. Push the Rotary Dial. The display shows TIME HOURS
b. Turn the Rotary Dial until the hours are set.
c. Push the Rotary Dial to confirm. The display shows TIME
MINUTES.
• Turn the dial until the display shows: UNIT ON
a. Push the Rotary Dial. The display shows HOURS
b. Turn the Rotary Dial until the hours are set.
c. Push the Rotary Dial to confirm. The display shows MINUTES
d. Turn the Rotary Dial until the minutes are set.
e. Push the Rotary Dial to confirm. Display shows and
CONFIRMED ✔ and displays UNIT ON and the selected time.
f. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
d. Turn the Rotary Dial until the minutes are set.
e. Push the Rotary Dial to confirm. Display shows CONFIRMED ✔
and shows the actual time.
f. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
26.9 AUTO-OFF
Your Z5 is pre-set to turn itself off 2 hours after last use. You can
change the auto-off interval between 1/2 hour and 14 hours or
you can set the Z5 not to turn itself off at all.
27.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommendations: If you use the machine only in the morning,
leave the auto-off as is.
• Then it will show the pre-sets for these buttons (volumes in oz.
and milk in seconds)
If you use the machine all day long set the auto-off between 3 and
5 hours. This way the machine is always ready and you don’t
have to turn it on and wait for it to warm up again.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Finally it will show how often the programs for decalcifying,
cleaning and filter change were used.
c. Push the Rotary Dial to return to INFORMATION.
d. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
• Turn the dial until the display shows: OFF AFTER
a. Push the Rotary Dial. The display shows OFF AFTER 2 HRS
b. Turn the Rotary Dial until the desired setting appears in the
display, e.g. 5 HRS.
c. Push the Rotary Dial to confirm. Display shows CONFIRMED ✔
and shows OFF AFTER 5 HRS.
26.11 RENAMING
This nifty feature lets you rename all eight beverage buttons, the
welcome message and the end message. The original pre-sets
are stored in the Z5 and you can always restore them.
Let’s change the 1 ESPRESSO name to CUP OF JOE.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
d. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
• Turn the dial until the display shows: RENAME
a. Push the Rotary Dial. RENAME PRODUCT NAME. If you turn
the dial you can select from PRODUCT NAME, WELCOME
MESSAGE, END MESSAGE, EXIT.
b. Select PRODUCT NAME and push the dial. PRODUCT
NAME CHANGE. If you turn the dial you can select from
CHANGE, RESET, RESET ALL. Select CHANGE and push
the dial. SELECT PRODUCT.
c. Push the 1-cup Espresso Button. The alphabet will show in
the display. Turn the dial to "C" and push the dial, then select
the letter "U" and push the dial and so on.
Please note: The "blank" space is located after the letter "Ü".
d. When you are finished with the new name select the ✔ symbol
26.10 INFORMATION
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows: INFORMATION.
a. Push the Rotary Dial 1 ESPRESSO 15 COUNT (example). It
shows how often coffee was prepared with this button.
b. Turning the Rotary Dial slowly clockwise, the display will show
the following additional information:
• How many cups made with the other buttons: 2 Espresso, 1
Coffee, 2 Coffee, Cappuccino, Special Cup, Milk, Hot Water,
Pre-ground.
28.
Download from Www.Somanuals.com. All Manuals Search And Download.
and push the Rotary Dial.
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
• Turn the dial until the display shows: SETTINGS
a.Push the Rotary Dial. UNIT. Turn the dial and select from
UNIT or TIME FORMAT.
e. The machine will display CONFIRMED ✔ and returns to
RENAME. Turn the dial until the display shows EXIT and
push the dial.
COFFEE READY.
b.Push the Rotary Dial and select the display you like.
c.Push the Rotary Dial to confirm.
d.Turn the dial until the display shows EXIT and push the dial.
COFFEE READY
The next time you make coffee and push the 1-cup Espresso
Button, the display will show CUP OF JOE.
Please note: the maximum length of message is 12 characters
including spaces.
Please note: you can reset a single beverage button or you can
reset all beverage buttons.
27. CARE AND MAINTENANCE MESSAGES
To make sure that your machine is always in the best possible
condition the Z5 automatically monitors a series of functions,
such as water tank level, used coffee container content, bean
container etc. When certain conditions are not met, the Z5 will
not let you prepare any beverages.
26.12 LANGUAGE SELECTION
You can change the display from English to Spanish, German,
French or Dutch
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER.
27.1 FILL WATER TANK
• Turn the dial until the display shows: LANGUAGE
a.Push the Rotary Dial ENGLISH.
b.Turn the Rotary Dial until the desired language is displayed.
c.Push the Rotary Dial to confirm.
The display shows WATER TANK FILL when the water level is
low. This prevents the pump from running dry. You cannot brew
coffee. Add water and the display will show COFFEE READY.
d.Turn the Rotary Dial until the display shows EXIT and push to
confirm. The display will show the equivalent of Coffee Ready
in the language you selected.
27.2 FILL BEANS
COFFEE READY FILL BEANS.
This message will appear with a few beans left in the bean con-
tainer. This feature makes sure that you will never produce a cup
of coffee with not enough beans. You cannot brew coffee before
adding beans (chapter 6.b).
26.13 DISPLAY SETTINGS
This function lets you select the time format: AM / PM or Military
Time (24HR Format) and volume: OZ (ounces) or ML (milliliters).
COFFEE READY
29.
Download from Www.Somanuals.com. All Manuals Search And Download.
27.3 BEAN COVER MISSING
28. TABLET CLEANING PROCESS
When the display shows BEANCOVER MISSING the Z5 will not
brew coffee. For safety reasons the cover must be in place.
Make sure the bean cover is in place correctly.
Please note: If you lose or break the bean cover the Z5 cannot
be used at all. Contact our customer service department.
When brewing coffee inside the Z5, coffee oils start to accumulate
in the brewing chamber and around the internal sieves. The Z5
automatically reminds you after approx. 200 cups of coffee to
run a tablet cleaning cycle. This 15 minute procedure is highly
effective and will insure proper performance. The display will
show COFFEE READY CLEAN and the rinse button illuminates.
Please note: You can continue making coffee, however we highly
recommend that you clean the machine as described below
within the next few days. Please use one white cleaning tablet
(enclosed). The machine comes with a pack of 2 tablets.
To re-order cleaning tablets see chapter 34.
Important: Once the cleaning program has started do not
interrupt the procedure.
COFFEE READY CLEAN
• Push and hold the rinse button until the display shows TRAY
GROUNDS EMPTY.
a. Remove and empty the drawer and used coffee container,
TRAY MISSING and replace complete assembly (Fig. 2) .
Important: Even if the drawer and the used coffee container are
empty, you still need to remove the drawer for approx. 20 seconds
and then replace it. The display shows PRESS BUTTON.
b. Place a 12 oz. container under the coffee spouts and an 8 oz.
container under the nozzles of the auto-cappuccino system.
c. Push the Rinse Button. The display shows MACHINE IS
CLEANING. You will hear a beep and after a moment the
display shows ADD TABLET.
27.4 EMPTY COFFEE GROUNDS
Used coffee grounds are collected in the used coffee container
(Fig. 2,8). After approx. 16 coffee portions, the display shows
GROUNDS EMPTY and the Z5 will no longer make any bever-
ages. Lift and pull out the complete drawer assembly carefully,
since there is water in it (Fig. 2) TRAY MISSING.
Important: Do not turn off or unplug the machine while you are
emptying the coffee grounds. Empty the used coffee container
and the drawer. Make sure that the grid, tray and use coffee
container are all assembled correctly and re-insert.
COFFEE READY
Important: If you pull out the drawer in between, you must
empty the used coffee container. The Z5 assumes that the used
coffee container will be emptied. If you do not empty the con-
tainer, used coffee will overflow inside the machine and can
cause serious damage to the coffee release mechanism. If the
display shows COFFEE BIN MISSING, the tray is not attached
to the drawer (Fig. 2,9).
Please note: The Z5 does not sense whether or not the used
coffee container is inserted (Fig. 2,8). If you forget to insert the
used coffee container, ground coffee will be discharged onto the
tray inside the machine.
d. Open the Cover Lid then the Ground Coffee Lid and drop in
one white cleaning tablet, then close lid (Fig. 13).
e. PRESS BUTTON. Push the Rinse Button. The display shows
30.
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE IS CLEANING. The cleaning program will dispense
hot foamy water in intervals through the spouts. After a
few minutes the machine beeps and the display shows TRAY
GROUNDS EMPTY.
for several weeks install a new cartridge.
Important: The decalcifying program must not be interrupted.
DECALCIFYING AGENT: Only use our special decalcifying
f. Lift and remove the drawer. Empty the used coffee container
tablets Model # 61848, see chapter 34.
and drawer and replace. The display shows COFFEE READY. CAUTION: Never use vinegar or any other decalcifying agent.
Please note: After this cleaning process, remove the powder
funnel insert and clean under running water and replace.
Tip: You can run a tablet cleaning cycle at anytime even if the
machine does not prompt you. It is possible that very oily coffee
beans deposit more oils slowing down the brewing process. An
extra tablet cleaning cycle will remove the oil build up.
COFFEE READY
This might damage internal parts of the machine.
CAUTION: Immediately remove any splashes or drops of the
decalcifying solution from sensitive surfaces, such as natural
stone or wood.
Always wait until the decalcifying solution in the water tank has
been used up. Do not fill additional decalcifying solution into the
water tank.
a. Push and hold the rinse button until the display shows TRAY /
GROUNDS EMPTY.
• Push and hold the Rotary Dial until the display shows FILTER.
• Turn the dial until the display shows: MAINTENANCE
• Push the dial and select CLEAN UNIT.
• Push the dial again. TRAY GROUNDS EMPTY.
• Continue with steps a. through f. above.
b. Remove and empty the drawer and used coffee container
TRAY MISSING and replace complete assembly (Fig. 2).
Important: Even if the drawer and the used coffee container are
empty, you still need to remove the drawer for approx. 20 seconds
and then replace it. The display shows SOLVENT IN TANK.
c. Remove and empty the water tank.
d. Dissolve 3 of the large square decalcifying tablets in a con-
tainer with 20 oz. of water (0.6 liters) and pour the solution
into the water tank. Replace water tank.
e. SOLVENT IN TANK PRESS BUTTON. Remove the Dual Nozzle
System and the Dial Component (Fig. 5a, 5b) and place one
container underneath the milk spout. Place another container
underneath the Hot Water Spout. Each container should have
at least an 8 oz. capacity.
29. DECALCIFYING PROCESS
The machine has an integrated decalcifying program.
This program takes about 50 minutes.
When the display shows COFFEE READY DESCALE it is time
to decalcify the machine. You can still make coffee. However, it
is highly recommended that you decalcify the machine within the
next 3 to 4 days.
Please note: If you use the Clearyl water cartridge and the display
shows COFFEE READY DESCALE then your cartridge function
is not activated. Follow the instructions in chapter 23a to
program the Clearyl Cartridge function. If the cartridge is in use
f. Push the Rinse Button. MACHINE IS DECALCIFYING. For
31.
Download from Www.Somanuals.com. All Manuals Search And Download.
approx. 35 minutes the Z5 will pump the decalcifying solution
in intervals through the Milk Nozzle, then internally into the
drawer, then through the Hot Water Spout and again into the
drawer. When the water container is empty the display will
show TRAY / GROUNDS EMPTY.
COFFEE READY
• Push and hold the Rotary Dial until the display shows FILTER.
• Turn the dial until the display shows: MAINTENANCE
• Push the dial and select DECALCIFYING UNIT.
• Push the dial again. TRAY GROUNDS EMPTY.
Continue with step b. through l. above.
g. Remove the containers. Then remove and empty the drawer
and used coffee container and replace complete assembly
(Fig. 2).
h. WATER TANK FILL. Remove the water tank, thoroughly rinse
it and fill with fresh cold water.
30. EMPTYING SYSTEM BEFORE TRANSPORT
This procedure is necessary to prevent water and frost damage
in case you intend to transport the machine.
• Turn the machine off with the on/off button on top of the
machine. The main power switch is still on.
• Remove the water tank.
• Place a cup underneath the Hot Water Spout and place a cup
underneath the Auto Cappuccino System.
• Push and hold the Rinse button until the display shows SYS
EMPTY. The Z5 will release a bit of water and steam and will
turn off automatically.
• Before transport make sure the Water Container and the Bean
Container are empty.
Please note: Use the original inside and outside carton for
transport, or you can order a custom molded, special service ship-
ping container through our customer service department ($40).
i. Replace the water tank.
j. PRESS BUTTON. Place one container underneath the Milk
Nozzle and one container underneath the Dual Coffee Spouts
and the Hot Water Spout. Each container should have at least
an 8 oz. capacity.
k. Push the Rinse Button. MACHINE IS DECALCIFYING. For the
next few minutes the Z5 will pump the fresh water through the
Milk Nozzle, then internally into the drawer and finally through
the Hot Water Spout to remove all decalcifying traces.
l. At the end of the decalcifying cycle the display shows
MACHINE IS HEATING. After a few seconds the Z5 will
automatically run a rinse cycle through the Dual Coffee
Spouts. RINSING.
m. TRAY / GROUNDS EMPTY Remove the containers and
remove and empty the drawer and used coffee container and
replace complete assembly (Fig. 2).
31. TIPS FOR BETTER COFFEE
Pre-warm cups.
If your cup is pre-warmed, your coffee will stay warm longer,
especially when you prepare small cups. Use the hot water
spout to pre-warm your cups.
COFFEE READY.
Tip: You can run a decalcifying cycle at anytime even if the
machine does not prompt you.
Height adjustable coffee-spout
32.
Download from Www.Somanuals.com. All Manuals Search And Download.
The closer the coffee spouts are to your cups, the less heat is
lost in the air. The crema is more durable if the coffee flows down
the inside of the cup, rather than hitting the bottom of the cup.
Old beans
Beans will lose aroma when sitting too long in the bean container.
We recommend to fill just enough coffee beans into the bean
container for up to three or four days.
B. THE DISPLAY READS FILL WATER BUT THERE IS
ENOUGH WATER IN THE WATER TANK.
Reason: The low water floatation device (Fig. 10 "x") is missing.
Solution: Within the water tank is a small compartment. Inside is
a small black floatation device. On top is a small clear plastic
cover. This small plastic cover is missing and the floatation
device is outside of the small compartment. Check if you can
locate both pieces and reassemble. If you cannot find them, call
1-800-220-5701. We will send the pieces to you FREE OF CHARGE.
32. TROUBLE SHOOTING
A. NO COFFEE COMES OUT OF THE COFFEE SPOUT
Reason: Beans in bean container are not properly feeding into
the grinder because they are stuck together.
Solution: Stir beans before grinding. While grinding turn
the grinding selector to the coarsest setting (chapter 7).
Reason: You used ground coffee in the Ground Coffee Funnel.
The ground coffee was too fine.
Solution: Use ground coffee that is ground somewhat coarser.
Reason: No water is transported through the system.
Solution: Remove water container and make sure that the
connecting valve is free of any particles (like a coffee bean etc).
Reason: The ground coffee funnel or the internal brewing
chamber is clogged.
Solution: Place a cup underneath the Dual Coffee Spout and
run an extra rinse cycle. COFFEE READY
• Push and hold the Rotary Dial until display shows FILTER.
• Turn the dial until the display shows: MAINTENANCE
• Push the dial and select RINSE UNIT.
• Push the Rotary Dial again. Place a cup underneath the Dual
Coffee Spouts and push the Rinse Button.
COFFEE READY
C. INSUFFICIENT FROTHED MILK PRODUCTION
Make sure
• the dial of the Auto Cappuccino System points the frothing
position (Fig. 5f).
• the venting tip (Fig. 5a) is clean (check if the flexible lip is free
of any old milk residue).
• the Auto Cappuccino System is assembled tightly (chapter 12)
• all parts of the Auto Cappuccino System are clean and not
clogged with old milk residue
The milk you are using is "too heavy". "Half and Half" or liquid coffee
creamers like "coffeemate" are too heavy to be siphoned fast
enough through the system.
Skim milk will always produce more froth than whole milk.
D. GRINDER MAKES AN EXTREMELY LOUD NOISE;
NO BEANS ARE GROUND
Reason: A stone is blocking the burr grinder.
• Turn the machine off. Unplug the machine.
• Open the Cover Lid and remove the Bean Container Safety
Lid (Fig. 4).
33.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Remove any beans with a vacuum hose.
• Attach the burr grinder release tool (Welcome Pack) to the
upper burr (Fig. 15).
try one more time.
• If the message persists, call customer service.
• If you cannot find the tool, call customer service
1-800-220-5701 and we will send the tool free of charge.
• Turn the tool slowly counter-clock wise until the stone is
released.
• Fill with a few beans.
• Turn the machine on and test the grinder.
• Discard the first two cups of coffee.
34. MAINTENANCE SUPPLIES
The following supplies are necessary to keep your machine in
good working order:
• Clearyl Water Filter Cartridge (one included)
Model #64553; the machine will remind you automatically.
Tip: If you brew 10 cups a day you need about one Clearyl
cartridge per month. Always keep extra cartridges available.
• Special Cleaning Tablets (two included) Model #62205
Tip: If you brew 10 cups a day you need about one tablet
every 3 weeks. Always keep extra tablets available.
• Auto-Cappuccino Cleaner (one bottle included)
Model #63801
33. ERROR MESSAGES
If the Z5 displays any of the following error messages, please
proceed as described.
ERROR 1, ERROR 3, ERROR 4, ERROR 5
Call our customer service hot line 1-800-220-5701.
Your machine needs to be returned for service.
Tip: If you use the auto cappuccino cleaner once a day you
need a new bottle every 2 1/2 weeks. Always keep extra
bottles available.
ERROR 2
• Decalcifying tablets (large square tablets) - Model #61848
Please note: You must use decalcifying tablets if you do not
use the Clearyl cartridge.
Your machine is too cold. The heating sensor does not react.
• Turn the machine off.
• Keep the machine at normal room temperature (65º F or
higher) for 2 hours .
You can order these supplies:
• Then turn it on again.
• with the enclosed mail order form or
If display still shows ERROR 2, call customer service.
• by calling our customer service center at 1-800-220-5701.
ERROR 6, ERROR 7, ERROR 8
• Turn machine off, turn the main power switch off and unplug
machine for a minute.
• Turn machine on again. If the error message comes up again,
34.
Download from Www.Somanuals.com. All Manuals Search And Download.
35. LIMITED WARRANTY
Please note: This warranty will be void if the Warranty / Product
• Damage caused by neglecting and omitting maintenance,
cleaning and decalcifying cycles.
Registration has not been received two weeks after the purchase • Damage caused by use of instant coffee or any other ingredients
date (you can fax or mail the registration or you can register
through our website www.capresso.com)
not allowed in this product.
Other limitations and exclusions:
This limited warranty covers your new IMPRESSA Z Series:
For Household use only for one year or 6,000 coffee
brewings, whichever comes first.
Any implied warranties including fitness for use and mechantability
are limited in duration to the period of the express warranty set
forth above and no person is authorized to assume for JURA-
CAPRESSO any other liability in connection with the sale of the
machine. JURA-CAPRESSO expressly disclaims liability for
incidental and consequential damages caused by the machine.
The terms "incidental damages" refer to the loss of the original
purchasers time, loss of the use of the machine or other costs
relating to the care and custody of the machine. The terms
"consequential damages" refer to the cost of repairing or replacing
other property which is damaged when this machine does not
work properly. Any loss of income is excluded. The remedies
provided under this warranty are exclusive and in lieu of all others.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
This warranty is in effect for the period and usage described
above from the date of the first purchase and is limited to the
United States of America. This warranty covers all defects in
materials or workmanship (parts and labor) including free UPS
ground transportation for both ways within the continental
United States. For Hawaii and Alaska freight is not covered by
this warranty.
TRANSPORT: When sending the Z5, use the original packing
materials, the inner and outer cartons or you can order a special
custom molded service shipping container through our customer
service department ($40). If you ship the machine in other packag-
ing any damage in transit is NOT covered by this warranty.
This warranty does not cover:
• Any machine NOT distributed by JURA-CAPRESSO within the
United States.
• Any machine not purchased from an Authorized Dealer.
• Damage caused by accident, abuse, negligence, misuse,
improper operation or failure to follow instructions contained in
this manual.
• Any service or alteration performed by an unauthorized person,
company or association.
35.
Download from Www.Somanuals.com. All Manuals Search And Download.
Jura-Capresso, LLC
81 Ruckman Road, Closter, NJ 07624
201-767-3999 • Fax: 201-767-9684
Customer Service: 1-800-220-5701
Download from Www.Somanuals.com. All Manuals Search And Download.
|