IMPRESSA S90/S95/S9
IMPRESSA 701/601
Instructions for use
5/04
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
A
B
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
2
3
1
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Download from Www.Somanuals.com. All Manuals Search And Download.
12
14 15
16
13
D
C
B
A
E
F
17
18
19
20
21
11
10
9
8
G
H
7
6
5
22
4
3
23
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for use
1 Drip tray / residual water container
2 Drip tray cover
3 Cover for programming keys
4 Coffee key for 2 large cups
5 Coffee key for 1 large cup
6 Coffee key for 2 small cups
7 Coffee key for 1 small cup
8 Key for special coffee
9 ON/OFF switch
10 Rinsing key
11 Display dialogue system
12 Water tank with carrying handle
13 Cover for bean container and aroma protection lid
14 Cover for pre-ground coffee filler funnel
15 Height-adjustable coffee-spout
16 Cup warming tray
17 Selector key for steam
18 Selector key for steam portion
19 Selector switch for coffee or hot water (TAP)
20 Pivoting nozzle for steam
21 Professional Cappuccino Frother
22 Height-adjustable tea-spout
23 Container for coffee grounds
Programming keys
A
B
Change filter
Back-setting of criteria / changing of memory indications
downwards
C
D
E
F
Open program
Selector switch for pre-ground coffee
Key for cleaning program
Correction of program / close
Forward-setting of criteria / changing of memory indications
upwards
G
H
Key for decalcifying program
Download from Www.Somanuals.com. All Manuals Search And Download.
13.2 Programming coffee temperature ..................page 14
13.3 Programming water quantity........................page 14
13.4 Programming steam portion.........................page 14
13.5 Programming tea portion ............................page 14
13.6 Programming filter ....................................page 14
13.7 Programming water hardness .......................page 14
13.8 Programming economy mode........................page 15
13.9 Programming timer clock............................page 15
13.10 Programming automatic switch
Table of contents
Jura Impressa
1. Description........................................................page
2. Safety instructions ..............................................page
2.1 Warnings ...................................................page
2.2 Safety precautions ........................................page
3. Check before use.................................................page
3.1 Checking mains voltage..................................page
3.2 Checking fuse ..............................................page
3.3 Adding coffee beans ......................................page
3.4 Adjusting grinder .........................................page
4. Preparing machine..............................................page
4.1 Fill system with water ...................................page
4.2 Cup illumination ........................................ page
5. Rinsing the machine ............................................page
6. Adjusting for water hardness .................................page
7. Use of Claris filter cartridges.................................page 10
7.1 Placing filter...............................................page 10
7.2 Replacing of filter ........................................page 10
8. Drawing off coffee...............................................page 10
8.1 Drawing off powder coffee ..............................page 11
9. Drawing off hot water..........................................page 11
10. Drawing off steam ............................................ page 11
11. Frothing up milk with the Auto-Cappuccino
7
7
7
7
8
8
8
8
8
8
8
9
9
9
on time ...................................................page 15
13.11 Programming automatic switch
off time...................................................page 16
13.12 Cup counter .............................................page 16
13.13 Programming language selection...................page 16
N
13.14 Program key
.......................................page 16
14. Care and maintenance..........................................page 16
14.1 Fill water ................................................page 16
14.2 Empty grounds container.............................page 16
14.3 Empty drip tray ........................................page 16
14.4 Fill beans ................................................page 17
14.5 Removing foreign objects.............................page 17
14.6 Clean machine ..........................................page 17
14.7 Unit calcified ...........................................page 17
14.8 Cleaning metal contacts ..............................page 17
14.9 General cleaning instructions........................page 17
14.10 Empty system...........................................page 18
15. Cleaning ...........................................................page 18
16. Decalcifying.......................................................page 18
17. Disposal............................................................page 19
18. Tips for a perfect coffee .......................................page 19
19. Messages ..........................................................page 20
20. Problems ..........................................................page 21
21. Legal information ...............................................page 22
22. Technical specifications ........................................page 22
S90/S95/601.....................................................page 12
11.1 Frothing up a portion of milk S90/S95/601.....page 12
11.2 Constant frothing up of milk S90/S95/601..... page 12
11.3 Connecting the Professional-Cappuccino
Frother to the S9, 701 ...............................page 12
11.4 Drawing off cappuccino and hot milk with the
Professional-Cappuccino Frother ...................page 12
11.5 Cleaning the Professional-Cappuccino Frother ..page 13
12. Switching off machine..........................................page 13
13. Programming.....................................................page 13
13.1 Programming powder quantity......................page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Important information for the user
2. Safety instructions
2.1 Warnings
Thank you for choosing this Jura product.
Ⅲ Children are unaware of the dangers that electrical machines re-
present. Therefore children should never be left unsupervised
around electrical machines.
Please study these instructions carefully before using your new
machine and keep them in a safe place for easy reference in the
future.
Ⅲ This machine should only be used by people who have read and
understood the operating instructions.
Should you require further information or should particular pro-
blems occur that are not dealt with in these operating instructions
in sufficient detail for you, then please ask your local dealer for
the information you require or contact Jura Elektroapparate AG
directly.
Ⅲ Never use a faulty machine or one with a damaged power cable.
Ⅲ Never immerse the machine in water.
2.2 Safety precautions
Ⅲ Never expose the machine to the effects of rain, snow or frost
and never operate it with wet hands.
Ⅲ Place your machine on a solid level surface. Never leave it on a
surface that is warm or hot (hob etc.). Choose a location that is
inaccessible for children or pets.
1. Description
This fully-automatic espresso/coffee machine impresses because of
its user-friendly operational mode and its ingenious technology. In
just one brewing-process it can prepare 1 or 2 cups of excellent,
professional-quality espresso/coffee with guaranteed froth. Ori-
ginating from professional sectors and having been refined and
further developed by Jura, the Intelligent Pre Brew Aroma System
(I.P.B.A.S „) ensures full coffee aroma.
E
Ⅲ Remove plug from power socket if an absence for a longer
period of time (holidays etc.) is planned.
Ⅲ Always remove plug from power socket before cleaning.
Ⅲ When removing plug from power socket, never tug on the cord
or on the machine itself.
The Auto-Cappuccino, for example, automatically takes charge of
frothing the milk perfectly for your cappuccino. It sucks milk from
a Tetra Pak or a jug, heats and froths it up. Just choose the pro-
grammable steam quantity or the continuous steam function. Pre-
paring a cup of tea with your machine is as simple as can be as
well. The water quantity can be programmed and you can put your
teacup under the coffee-spout. Now the selected water quantity
flows into your cup through a separate spout.
The machine works fully-automatically at the press of a key. A
decoded text-display shows messages and simplifies the operation
considerably. Because of the integrated rinsing, cleaning and
decalcifying programs care and maintenance is quick and easy.
Ⅲ Never repair or open the machine yourself. All repairs should be
performed by authorised service centres only using original Jura
spare parts and accessories.
Ⅲ The machine is connected to the mains power socket via an
electric cable. Ensure that no-one trips over this cable and pulls
down the machine. Keep children and animals at a distance to
the machine.
Ⅲ Never put the machine or even parts of it in the dishwasher.
Ⅲ To prevent overheating place the machine in an airy place.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
3.4 Adjusting grinder
Ⅲ If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especially
natural stone and wooden surfaces, or take corresponding pre-
cautions.
You can adjust the grinder to the roast of your coffee. We recom-
mend the following:
for a light roast Ǟ a finer adjustment
for a dark roast Ǟ a coarser adjustment
3. Check before use
Ⅲ Open the cover of the bean container (13).
3.1 Checking mains voltage
Ⅲ To adjust grinding turn selector switch (Fig. 1) to the desired
position.
The machine is set for the correct voltage before leaving our
factory. Ensure that your mains voltage corresponds to the details
quoted on the rating plate attached to the bottom of the machine.
Ⅲ You have the following possibilities:
the smaller the dots, the finer the grinding
the bigger the dots, the coarser the grinding
3.2 Checking fuse
The grinding grade should only be adjusted while the grinder
is working.
The machine is designed for a current of 10 amps. Check that an
appropriate fuse is fitted.
4. Preparing machine
3.3 Adding coffee beans
4.1 Fill system with water
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your Jura coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding ge-
ar. Any repair costs resulting from the use of such blends are
not covered by warranty.
Ⅲ Switch your machine on by pressing ON/OFF key
machine adjusts fully-automatically to the starting position.
. The
Ⅲ
Ⅲ
PLEASE WAIT
FILL SYSTEM / PRESS STEAM
Ⅲ Press key
.
Ⅲ
FILL WATER
Ⅲ Lift up cover of the bean container (13) and remove aroma pro-
tection lid.
Ⅲ Remove water tank and rinse well with clear tap-water.
Ⅲ Fill water tank and replace. Make sure that tank engages well.
Ⅲ Clean out any dirt or foreign object from the bean container.
Ⅲ
FILL SYSTEM / PRESS STEAM
Ⅲ Fill the grinder container (Fig. 1) with coffee beans, replace
aroma protection lid and close the cover.
Ⅲ Place a container under the pivoting nozzle (20) and press key
.
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Ⅲ Place a container under the coffee-spout (15) and press rinsing
key
The machine has got 5 hardness settings to choose from. While
adjusting, the chosen grade is shown on the display.
.
Ⅲ
Ⅲ
UNIT RINSING
The symbols on the display mean:
HARDNESS
COFFEE READY
LEVEL—:
water hardness function is switched off
4.2 Cup illumination
HARDNESS
LEVEL 1:
German water hardness 1 – 7°
French water hardness 1.79 – 12.53°
The cup illumination puts your coffee in a good light, making it a
treat for the eyes.
When you switch on the machine or press any key, the cup illumi-
nation is activated for 3 minutes. To switch on the cup illuminati-
on, with the machine switched off, press any key.
HARDNESS
LEVEL 2:
German water hardness 8 – 15°
French water hardness 14.32 – 26.85°
HARDNESS
LEVEL 3:
German water hardness 16 – 23°
French water hardness 28.64 – 41.14°
HARDNESS
LEVEL 4:
German water hardness 24 – 30°
French water hardness 42.96 – 53.7°
5. Rinsing the machine
Ⅲ
RINSE UNIT
Ⅲ Place an empty cup under the coffee-spout (15).
Ⅲ Press rinsing key
The machine is adjusted to hardness level 3 before it leaves the
factory. You can alter this setting by following the instructions
below:
.
E
Ⅲ Switch the machine on by pressing ON/OFF key
machine adjusts fully-automatically to the starting position.
. The
If the machine has been switched off and has already cooled
down it will be necessary to carry out this rinsing function
when the machine is switched on again.
After switching off the machine, the rinsing sets off automa-
tically.
Ⅲ
PLEASE WAIT
P
Ⅲ Open cover (3) and press key , until you hear an acoustic sig-
nal.
Ⅲ
PRESS KEY / POWDER QUANTITY
6. Adjusting for water hardness
+
Ⅲ Press key
several times until the following message appears:
The water is heated inside the machine. With use, this leads to
calcium deposits (furring) forming on the machine. This will be
automatically indicated on the display.
For this reason, it is necessary to adjust the machine to the
hardness of your local water before you use it for the first time.
Use the enclosed test-sticks for this purpose.
Ⅲ
HARDNESS LEVEL 3
P
Ⅲ By pressing key
you can hear an acoustic signal, the set
hardness level flashes.
+
Ⅲ You can alter the hardness level by pressing key - or . After
P
setting, press key
can be heard.
once again to confirm. An acoustic signal
N
Ⅲ Press key
to return to stand-by-status.
1° water hardness on the German scale represents 1.79° on
the French scale.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
7. Use of Claris filter cartridges
The water might be slightly discoloured (this is not damag-
ing to the health).
Under proper implementation of Claris filter cartridges,
decalcifying of the machine becomes unnecessary. For
further information, please read the brochure “Claris. Tough
to calcium deposits, gentle to your coffee machine“.
7.2 Replacing of filter
After drawing off 50 litres the filter loses its effect.
Ⅲ
REPLACE FILTER
7.1 Placing filter
If only a little water is drawn off the filter should be changed every
2 months. However no message will appear on the display. You
will find a special turntable on the cartridge mounting to set the
replacement date.
Ⅲ Pull up cartridge mounting. Pressing lightly, place the filter cart-
ridge in the water tank (Fig. 2).
Ⅲ Pull down cartridge mounting, until it engages audibly.
Ⅲ Fill water tank with cold, fresh tap-water and replace it.
Ⅲ Empty water tank and pull up cartridge mounting. Pressing
lightly, place the filter cartridge in the water tank (Fig. 2).
Ⅲ Switch the machine on by pressing key
ON/OFF.
Ⅲ Pull down cartridge mounting, until it engages audibly.
Ⅲ Fill water tank with cold, fresh tap-water and replace it.
P
Ⅲ Open front cover (3) and press key
signal.
until you hear an acoustic
Ⅲ Switch the machine on by pressing key ON/OFF
.
Ⅲ
PRESS KEY / POWDER QUANTITY
Ⅲ Open front cover (3) and press key , until you hear an acoustic
signal.
+
Ⅲ Press key
several times until the following message appears:
Ⅲ
FILTER NO
Ⅲ
RINSE FILTER / PRESS STEAM
Ⅲ Place a sufficiently large container (approx. 1 litre) under the
pivoting nozzle (20) and press coffee key
P
Ⅲ By pressing key
you can hear an acoustic signal.
Ⅲ
NO flashes
Ⅲ You can alter the setting by pressing key - or
YES flashes
.
+
.
Ⅲ
Ⅲ
PLEASE WAIT / FILTER RINSING
COFFEE READY
Ⅲ
P
Ⅲ To confirm press key
RINSE FILTER / PRESS STEAM
Ⅲ Place a sufficiently large container (approx. 1 litre) under the
pivoting nozzle (20) and press coffee key
PLEASE WAIT / FILTER RINSING. The drawing
off of water will stop automatically.
FILTER YES
. An acoustic signal can be heard.
The water might be slightly discoloured (this is not damag-
ing to the health).
Ⅲ
.
8. Drawing off coffee
Ⅲ
Ⅲ Switch the machine on by pressing key ON/OFF
.
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
Ⅲ
N
Ⅲ Press key
.
Put an empty cup under the coffee-spout (15) and press rinsing
key
Ⅲ
COFFEE READY
.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
9. Drawing off hot water
Ⅲ
Ⅲ
UNIT RINSING
COFFEE READY
Ⅲ Put a cup under the height-adjustable coffee spout (22) and turn
selector switch for hot water (19) to the symbol . The machine
will now deliver hot water.
Ⅲ Put 1, respectively 2 cups under the coffee-spout and press the
required key. The pre-brew system (I.P.B.A.S.©) moistens the
coffee powder, briefly interrupts the flow and then starts the real
brewing process.
Ⅲ
TEA PORTION
Ⅲ The drawing off of hot water will stop automatically.
CLOSE TAP
Ⅲ Turn selector switch for hot water back to the symbol
Ⅲ
You can interrupt the flow of coffee at any time by simply
pressing any of the coffee keys.
.
To obtain a perfect layer of froth adjust the coffee-spout
(Fig. 3) to the size of your cups.
To stop this process turn selector switch for hot water (19)
back to the symbol
.
8.1 Drawing off powder coffee
10. Drawing off steam
Ⅲ Open cover (3)
Steam can be used for heating liquids and frothing milk for
cappuccino. Make sure that the steam/frothing nozzle is
pushed upwards when liquids are heated. Push down the
frothing aid (Fig. 4) to froth liquids.
Ⅲ Press selector key for pre-ground powder coffee
FILL POWDER
.
Ⅲ
E
Ⅲ Now put 1 or 2 level measuring spoons of pre-ground coffee into
the pre-ground powder funnel (14).
During frothing some water will escape the system before
the actual steam draw-off. This does not affect the result, e.g.
when frothing milk.
Ⅲ Put 1, respectively 2 cups under the coffee-spout (15) and press
the required key.
At the start of the water draw-off there can be splashing The
steam nozzle becomes hot. Avoid direct contact with the
skin!
Never use soluble instant coffee or quick coffee. Only use
coffee powder from freshly ground beans or pre-ground
vacuum-packed coffee. Never fill the funnel with more
than 2 portions coffee powder at a time. The powder fun-
nel is not intended as a storage container.
Ⅲ Use the key
to switch on the coffee machine.
PLEASE WAIT
RINSE UNIT
Ⅲ
Ⅲ
If selector key
is pressed by mistake this can be cor-
rected by pressing one of the coffee keys. The rinsing pro-
gram is then activated.
Ⅲ Press rinsing key
Ⅲ
Ⅲ
UNIT RINSING:
COFFEE READY
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Ⅲ Place a cup under the steam/frothing nozzle (20) and immerse
the frothing aid in the milk to be frothed or the liquid to be
heated.
Ⅲ Put a cup under the pivoting nozzle (20) and press key . Your
milk froths up.
Ⅲ
STEAM INTAKE
Ⅲ Press steam portion draw-off key
STEAM PORTION
Ⅲ You can stop the draw-off operation at any time by pressing the
steam draw-off key
COFFEE READY
.
Ⅲ When the required amount of froth has been attained push selec-
Ⅲ
tor key
anew.
Ⅲ
COFFEE READY
.
With the flow-adjustment you can set the optimum frothing.
Turn the handle slightly to the right or to the left until you
obtain the required result.
Ⅲ
11. Frothing up milk with the Auto-Cappuccino
S90/S95/601
11.3 Connecting the Professional-Cappuccino
Frother to the S9, 701 (optional S90/S95/601)
Your machine is ready for frothing up milk as soon as both selec-
tor key warning lamps
glow constantly. If the lamps do not
Ⅲ Disassemble the replaceable hot water nozzle or the replaceable
steam/frothing nozzle.
glow, then press either steam-key
.
Ⅲ Mount the Professional-Cappuccino Frother (Fig. 11)..
11.1 Frothing up a portion of milk S90/S95/601
Ⅲ Press one side of the hose into the opening behind the dial
(Fig. 12).
Ⅲ Pour milk into a milk container and immerse the intake-tube in
the milk.
Ⅲ Put a cup under the pivoting nozzle (20) and press key
STEAM PORTION
Ⅲ The drawing off of steam will stop automatically
COFFEE READY
.
The optionally (S90/S95/601) available milk container can
be used for sucking in milk.
Ⅲ
11.4 Drawing off cappuccino and hot milk with the
Professional-Cappuccino Frother
Ⅲ
If the Auto-Cappuccino has not been used for a longer period
of time, press selector key first, until the milk is taken in,
. In this way you will obtain a regular
Ⅲ Fill the milk container with milk or immerse the hose in the milk
directly.
then selector key
steam portion.
Ⅲ Place a cup under the Professional-Cappuccino Frother.
Ⅲ Press the steam portion draw off key
STEAM PORTION
.
11.2 Constant frothing up of milk S90/S95/601
Ⅲ
Ⅲ The frothing/heating time depends on the steam portion settings
you have programmed. (See “Programming steam portion”
Chapter 13.4)
Ⅲ Pour milk into a milk container and immerse the intake-tube in
the milk.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Ⅲ For cappuccino turn the selector switch (1) (Fig. 10) to area
The following settings can be programmed:
(2)
̈ Powder quantity
̈ Coffee temperature
̈ Water quantity
Ⅲ For hot milk turn the selector switch (1) (Fig. 10) to area (3)
Ⅲ Now place the cup with the cappuccino froth or the hot milk
under the coffee spout and draw of the product of your choice.
̈ Steam portion
̈ Tea portion
̈ Filter
̈ Water hardness
̈ Economy mode
̈ Timer clock
11.5 Cleaning the Professional-Cappuccino Frother
The Professional-Cappuccino Frother must be cleaned after
each draw-off operation. Daily cleaning is recommended.
̈ Automatic switch on time
̈ Automatic switch off time
̈ Supplies and cup counter
̈ Language selection
Ⅲ Fill water in a container and immerse the hose in it.
Ⅲ Draw off steam until the water/steam mixture is clean.
Ⅲ If necessary, disassemble the Profi-Auto-Cappuccino/Caffè Latte
and thoroughly rinse the flow regulation with water (Fig. 13).
13.1 Programming powder quantity
For proper cleaning, use the Jura Auto Cappuccino Cleaning
Agent which is available at your authorized dealer.
Ⅲ Switch the machine on by pressing ON/OFF key
.
P
Ⅲ Press key
until you can hear an acoustic signal.
E
Ⅲ
POWDER QUANTITY / SELECT KEY
12. Switching off machine
Ⅲ Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under
the coffee-spout (15) and press ON/OFF key
water has run into the container, the machine powers down. Dis-
card the water.
. When the rinsing
Ⅲ
POWDER
+
- ·········· II ··········
+
Ⅲ The powder quantity can be selected by pressing keys
briefly.
or -
13. Programming
P
Ⅲ To store the new powder quantity in memory briefly press key
.
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
Ⅲ
POWDER QUANTITY / SELECT KEY.
+
Ⅲ By pressing the
button, you can select the next phase, or
N
press the
button in order to leave the programming.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
13.2 Programming coffee temperature
13.4 Programming steam portion
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ
STEAM PORTION
P
Ⅲ Now press the key that you want to programme.
Ⅲ Press key
.
Ⅲ Select the required temperature (high or normal) by activating
Ⅲ
PORTION /....20 SEC.
+
key
or - .
+
Ⅲ By pressing key
(drawing off time of 3 – 250 sec.)
or - you can programme time in seconds
Ⅲ To store the new coffee temperature in memory briefly press key
P
.
P
Ⅲ Press key
.
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ
STEAM PORTION
+
Ⅲ By pressing the
button, you can select the next phase, or
+
Ⅲ By pressing the
button, you can select the next phase, or
N
press the
button in order to leave the programming.
N
press the
button in order to leave the programming.
13.3 Programming water quantity
13.5 Programming tea portion
Ⅲ Place a cup under the height-adjustable tea-spout (22).
Ⅲ
WATER QUANTITY / SELECT KEY
P
Ⅲ Press key
.
Ⅲ Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
Ⅲ
Ⅲ
Ⅲ
OPEN TAP
ENOUGH TEA? / CLOSE TAP
TEA PORTION
Ⅲ
The selected value is confirmed
Ⅲ Now your machine prepares a coffee.
Ⅲ The required portion of tea-water is programmed now.
P
Ⅲ
Ⅲ
ENOUGH COFFEE? / PRESS KEY
+
Ⅲ By pressing the
press the
button, you can select the next phase, or
P
+
-
OK?
·········· II ··········
N
button in order to leave the programming.
P
Ⅲ When the required water quantity is reached press key
. You
+
can call up the next setting by pressing key
.
13.6 Programming Filter
Ⅲ There is an additional possibility to alter the water quantity
+
anew. Press key
or - for this purpose.
Please read chapter 7.1 “Placing filter“.
Ⅲ If you wish to draw another coffee to control the water quantity,
13.7 Programming water hardness
(only with setting Filter no)
P
press key again otherwise press key
quantity in memory.
briefly to store water
+
Ⅲ By pressing the
button, you can select the next phase, or
Ⅲ
HARDNESS LEVEL 3
N
press the
button in order to leave the programming.
P
Ⅲ Press key
+
Ⅲ By pressing key
hardness level.
or - briefly you can programme the water
Download from Www.Somanuals.com. All Manuals Search And Download.
14
13.9 Programming timer clock
P
Ⅲ Then press key
memory.
briefly to store the water hardness level in
button, you can select the next phase, or
A programming of the timer clock is necessary if an auto-
matic switch on time is required.
+
Ⅲ By pressing the
N
press the
button in order to leave the programming.
Ⅲ
TIME —.—
To determine the water hardness level please read chapter 6.
“Adjusting for water hardness“.
P
Ⅲ Press key
.
+
P
Ⅲ By briefly pressing key
or - you can set the hours and then
.
confirm by pressing key
13.8 Programming economy mode
+
-
Ⅲ By briefly pressing key
or
then confirm by pressing key
button, you can select the next phase, or
you can set the minutes and
Ⅲ
ECONOMY MODE OFF
P
.
P
Ⅲ Press key
+
Ⅲ By pressing the
press the
+
N
Ⅲ By briefly pressing key
you would like.
or - you can programme the mode
button in order to leave the programming.
13.10 Programming automatic switch on time
P
Ⅲ Then press key
Ⅲ By pressing the
briefly to store mode in memory
+
button, you can select the next phase, or
A programming of the timer clock is necessary if an automatic
switch on is needed.
N
press the
button in order to leave the programming.
Ⅲ
UNIT ON —.—
E
You can programme your machine to “economy mode“. In the set-
ting ECONOMY MODE ON the steam heating-system is switched
off. The heating for the cup warming tray is switched off too. If
P
Ⅲ Press key
.
+
P
Ⅲ By briefly pressing key
or - you can set the hours and then
.
you want to draw off steam you need to press the steam key
warning lamps flash and your machine heats up.
,
confirm by pressing key
+
-
.
Ⅲ By briefly pressing key
or
you can set the minutes and
P
then confirm by pressing key
After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
+
Ⅲ By pressing the
button, you can select the next phase, or
button in order to leave the programming.
N
press the
To switch off the automatic timer proceed as follows:
P
Press key
Press key
ECONOMY MODE OFF means that the stand-by-status for steam
is set to 20 minutes and the heating for the cup warming tray is on.
After 10 minutes the warning lamp goes out. By pressing the steam
key anew, the machine returns to stand-by-status for drawing off
steam.
N
UNIT ON —:—
Download from Www.Somanuals.com. All Manuals Search And Download.
15
13.11 Programming automatic switch off time
If a mistake occurs while programming one of the above
N
settings, just press key
and the chosen setting moves back
Ⅲ
OFF AFTER 5.0 HOURS
to its original standard setting.
P
Ⅲ Press key
+
Ⅲ By briefly pressing key
confirm by pressing key
or - you can set the hours and then
14. Care and maintenance
14.1 Fill water
P
(0.5 to 9.0 hours).
+
Ⅲ By pressing the
press the
button, you can select the next phase, or
button in order to leave the programming.
N
Ⅲ
FILL WATER
Ⅲ If this message shows on the display no more coffee can be
drawn off. Top up water.
13.12 Cup counter
Ⅲ
200 SUPPLIED (TOTAL SUPPLIED)
The water tank should be rinsed and filled with fresh water
daily. Only use fresh, cold water. Never top up with milk,
mineral water or any other liquids. You can top up water
without removing tank.
Ⅲ To obtain the information press the required key. The display
will show you the number of times the function has been chosen.
+
Ⅲ By pressing the
button, you can select the next phase, or
button in order to leave the programming.
N
press the
14.2 Empty grounds container
It is not possible to call up hot water and steam supplies.
Coffee grounds are collected in the grounds container (23).
Ⅲ
EMPTY GROUNDS
Ⅲ If this message shows on the display no more coffee can be
drawn off. It is necessary to empty the grounds container.
13.13 Programming language selection
P
Ⅲ Press key
Ⅲ By briefly pressing key
and then confirm by pressing key
Ⅲ Remove drip tray carefully as there is water in it.
+
-
or
call up the language desired
P
.
Do not disconnect the machine from power socket while
you empty grounds.
+
Ⅲ By pressing the
button, you can select the next phase, or
N
press the
button in order to leave the programming.
14.3 Empty drip tray
N
13.14 Program key
Ⅲ
EMPTY TRAY
Ⅲ If this message shows on the display no more coffee can be
drawn off. It is necessary to empty the drip tray.
N
By using key
you can set back the following settings (powder
quantity, coffee temperature, water quantity, steam portion, tea
portion) to their original standard settings.
Ⅲ Remove drip tray carefully as there is water in it.
Ⅲ
COFFEE READY
N
Ⅲ Press key
until you can hear an acoustic signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
14.4 Fill beans
14.7 Unit calcified
Ⅲ
FILL BEANS
Ⅲ
UNIT CALCED
Ⅲ Fill beans as described in chapter 3.3.
The machine signals when decalcifying becomes necessary.
The message FILL BEANS will only disappear after drawing
off a coffee. We recommend cleaning the bean container
from time to time with a dry cloth before you refill beans.
Switch off the machine for this purpose.
Under the correct implementation of Claris filter cartridges,
decalcifying of the machine becomes unnecessary. For
further indications read Chapter 7 “Use of Claris filter cart-
ridges“.
14.5 Removing foreign objects
14.8 Cleaning metal contacts
Ⅲ Switch off your machine by pressing ON/OFF key
Ⅲ Remove plug from power socket.
Ⅲ
EMPTY TRAY / CLEAN CONTACTS
.
Ⅲ The remnants of the calcified deposits in the area of the metal
contacts must be removed. Proceed as follows:
Ⅲ Open bean container (13) and remove the beans. The remaining
beans can be removed with a vacuum cleaner.
Ⅲ Rinse fastenings in groove (B) as well as the metal contacts (A)
with hot water and some washing-up liquid. Then clean the
fastenings in groove (B) as well with a brush (Fig. 8).
Ⅲ Loosen both screws in the bean container and then remove
container (Fig.5 + 6)
Ⅲ Remove any remaining beans with a vacuum cleaner.
Ⅲ Put the spanner on (Fig.7).
E
14.9 General cleaning instructions
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine.
Ⅲ Now turn spanner anticlockwise until the foreign object loosens.
Ⅲ Remove remaining powder with a vacuum cleaner.
Ⅲ Replace bean container and fasten screws.
Ⅲ Wipe down the casing inside and out using a soft, damp cloth.
Ⅲ Clean the pivoting nozzle after every use.
Ⅲ After warming milk, draw off some hot water to clean the
pivoting nozzle inside.
14.6 Clean machine
Ⅲ
CLEAN UNIT
Ⅲ You can take off the Auto-cappuccino for a thorough cleaning.
After coffee, etc., has been drawn off 220 times or after 180 rinsing
programs have been run, the machine must be cleaned. You can
continue to draw off coffee and hot water / steam. However we
recommend that you clean the machine (as described in chapter 15)
within the next few days.
Ⅲ The water tank should be rinsed and filled with clean water
daily.
If you notice any furring in the water tank, this can be de-
calcified separately with a customary decalcifying agent.
Remove the tank from the machine for this purpose.
Ⅲ
CLEAN NOW
An acoustic signal indicates the need of an immediate cleaning.
If a Claris filter cartridge is used, remove it beforehand.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
14.10 Empty system
Ⅲ
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
This procedure is necessary to prevent your machine from
frost damage while being transported.
COFFEE READY
Ⅲ Put a container under the pivoting nozzle (20).
The powder funnel for pre-ground coffee should be cleaned
after each cleaning process. Remove it from the machine,
rinse it with hot tap water and replace it after drying.
Ⅲ Press selector key
and remove water tank
Ⅲ
Ⅲ
STEAM INTAKE
PRESS STEAM / FILL SYSTEM
16. Decalcifying
Ⅲ Switch off machine by pressing ON/OFF key
.
Your machine has an integrated decalcifying program. It lasts
approx. 50 minutes.
15. Cleaning
Jura de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA S90/S95/S9/701/601
are available at your authorized dealer. Please note that
machine defects or residues in the water cannot be excluded
if you use inappropriate de-scaling agents.
The machine has an integrated cleaning program. The procedure
lasts about 15 minutes.
Jura cleaning tablets which are specially designed for the
cleaning program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Run the decalcifying program only after the machine has
been switched off for at least 5 hours and has cooled down
completely. The running decalcifying program must not be
interrupted.
It is essential not to interrupt the process once it has been
started.
If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especi-
ally natural stone and wooden surfaces, or take correspond-
ing precautions.
Ⅲ Switch on your machine by pressing ON/OFF
key
until you can hear an acoustic signal.
EMPTY TRAY (FILL WATER might show as well)
Ⅲ Press key
Ⅲ
In any case please wait until the filled decalcifying agent is
used up and the tank is empty. Never top up the decalcifying
agent.
Put a sufficiently large container under the coffee-spout (15)
in order to prevent cleaning liquid from running into the drip
tray.
Ⅲ Remove and empty water tank.
Ⅲ Replace empty water tank.
Ⅲ
Ⅲ
Ⅲ
ADD TABLET (Fig. 9) / PRESS CLEANING
UNIT CLEANING / PLEASE WAIT
EMPTY TRAY
Ⅲ Switch off your machine by pressing ON/OFF
key and let it
cool down for approx. 5 hours.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Ⅲ Open cover (3).
Ⅲ
Ⅲ
Ⅲ
UNIT DECALCIFIYING / PLEASE WAIT
CLOSE TAP
Ⅲ Press key until you can hear an acoustic signal.
Ⅲ
Ⅲ
EMPTY TRAY
UNIT DECALCIFIYING / PLEASE WAIT
AGENT IN TANK
Ⅲ Inside the machine the water is conducted to the drip tray.
Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank.
Ⅲ
CLEAN CONTACTS / EMPTY TRAY
(please refer to chapter 14.8)
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PLEASE WAIT
RINSE UNIT
Ⅲ
AGENT IN TANK / OPEN TAP / PRESS CALC
UNIT RINSING
COFFEE READY
Place a sufficiently large container under the pivoting nozzle
(20). Remove the Auto-Cappuccino.
Ⅲ Turn selector switch for coffee (19) to the symbol
key
and press
17. Disposal
.
For correct disposal, you should return your coffee machine to your
dealer, Jura service centre or Jura Elektroapparate AG.
Ⅲ
UNIT DECALCIFYING / PLEASE WAIT
Ⅲ When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).
18. Tips for a perfect coffee
E
Ⅲ
Ⅲ
Ⅲ
Ⅲ
PRESS CALC
Height adjustable coffee-spout
You can adjust the height of the coffee-spout to the size of your
cups.
UNIT DECALCIFYING / PLEASE WAIT
CLOSE TAP
Grinding
UNIT DECALCIFYING / PLEASE WAIT
Please refer to chapter 3.4 “Adjusting grinder“.
Ⅲ Inside the machine the decalcifying agent is conducted to the
Pre-warm cups
drip tray.
You should warm cups in advance with hot water or steam. The
smaller the quantity of coffee, the more important warming the
cups is.
Ⅲ
Ⅲ
EMPTY TRAY
FILL WATER
Ⅲ Place a container under the pivoting nozzle (20).
Sugar and cream
Ⅲ
Ⅲ
Ⅲ
OPEN TAP
Warmth is lost by stirring the contents of the cup. Adding milk or
cream from the refrigerator considerably lowers the temperature of
the coffee.
PRESS CALC
UNIT DECALCIFIYING / PLEASE WAIT
Ⅲ Place a container under the height-adjustable tea-spout (22).
PRESS CALC
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
19
19. Messages
Cause
Action
FILL WATER
Water tank is empty
Top up with water
Water level indicator in tank is jammed
Tank is calcified, water level indicator is stuck
Empty tank, rinse out, fill up and replace
Remove tank, decalcify, rinse well, fill up with water
and replace
FILL BEANS
Bean container is empty
Top up with beans
Message still displayed, although beans filled
Draw off cup of coffee. FILL BEANS message only
disappears after coffee is drawn off
A foreign object is stuck in the grinder
Coffee grounds container is full
Remove foreign object as described in chapter 14.5
“Removing foreign objects“
EMPTY GROUNDS
Remove drip tray, empty grounds container, replace
tray
Message still displayed although grounds
container emptied.
The tray was out of the machine for less than 8 sec
for emptying. Take tray out again for approx. 10 sec
and replace
The message appears after only a few cups have
been drawn off
Leave the machine switched on while the grounds
container is being emptied. The counter is only reset
to zero if the machine is left switched on
TRAY MISSING
EMPTY TRAY
Tray has not been replaced correctly
Insert tray correctly
Grounds have fallen under tray and are preventing Remove tray, clean inside of machine, replace tray
it from being correctly inserted
The residual water container is full
Remove container carefully, empty, rinse out and
replace
Message still displayed, although container
emptied
Remove container, clean metal contacts
(please refer to chapter 14.8)
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Cause
Action
CLEAN UNIT
You have drawn off coffee 220 times or run
the rinsing program 180 times
Clean as described in chapter 14.6
Message still displayed, although machine
cleaned
Run cleaning program again; this time do not
add cleaning tablet
UNIT CALCED
The espresso/coffee machine sector needs
decalcifying
Run decalcifying program as described in
chapter 16
Message still displayed, although machine
decalcified
Run cleaning program again; this time using water
only and without decalcifying agent
FAULT 2
FAULT 8
Temperature too low
Initialisation problem
– Switch device off
– Leave device for approx. 2 hours at room
temperature
– Switch device on
Switch device off, disconnect from mains,
switch on
E
20. Problems
Problem
Cause
Action
Coffee only flows in dribs
and drabs while drawing off
– Powder too fine
– Adjust grinder to a coarser grinding
– Run the rinsing programme once or twice.
– If the problem persists, run cleaning programme
Coffee flow is stopped
after pre-brewing
– Not enough coffee powder in the system
– Foreign element in grinder
– Draw off one cup of coffee
Grinder is extremely noisy
– Proceed as described in chapter 14.5
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Problem
Cause
Action
Not enough froth while
frothing up milk
– Frothing nozzle blocked
– Clean the Professional-Cappuccino Frother
– Clean frothing nozzle
– Clean the Professional-Cappuccino Frother as
– described in chapter 11.5
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate
AG.
21. Legal information
22. Technical specifications
These operating instructions contain all the information necessary
for the correct use, operation and maintenance of your espresso/
coffee machine.
Understanding and complying with the directions contained in
these operating instructions are essential to ensure that the machine
is utilised without risk and to ensure safety during operation and
maintenance.
These operating instructions cannot cover all the possible ways in
which this machine may be used. This machine has been designed
for private use in households.
We would like to further point out that the contents of these operat-
ing instructions in no way constitute a part of, or alter, any pre-
vious or existing contract, agreement or legal relationship. All ob-
ligations on the part of Jura Elektroapparate AG result solely from
the relevant sales agreement which also contains full details of
the only warranty terms valid in respect of this machine. The con-
tractual terms of this warranty are neither extended nor limited in
any form by the information in these operating instructions.
These operating instructions contain information that is protected
by copyright. The photocopying or translation into any other
language of these instructions without prior written authorisation
from Jura Elektroapparate AG is strictly prohibited.
Impressa S90/S95/S9/701/601
Voltage:
Output:
Fuse:
230 V AC
1350 W
10 A
Safety check:
Energy consumption standby:
Energy consumption ready to
make coffee:
approx. 4,4 Wh
approx. 31 Wh, Economy Mode on
approx. 41 Wh, Economy Mode off
max. 15 bar
2,7 litres
280 gr.
max. 16 port.
approx. 1,1 m
11,7 kg
34,5 x 35 x 39 cm
Pump pressure:
Water tank:
Capacity, bean container:
Capacity, grounds container:
Cable length:
Weight:
Dimensions (B x H x D):
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 “Low Voltage Directive” including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 “EMC Directive” including
Modification Directive 92/31/EWG
Download from Www.Somanuals.com. All Manuals Search And Download.
22
|