About This Guide
This E-Series Installation and User Guide provides the information you
need to install and start the E-series router.
Note: If the information in the latest E-series Release Notes differs from the
information in this guide, follow the E-series Release Notes.
The E-series router is shipped with the latest system software installed. If
you need to install a future release or reinstall the system software, refer
to the procedures in Appendix B, Installing JUNOSe Software.
E-Series Routers
Five models of E-series routers are available:
• ERX-1440 router
• ERX-1410 router
• ERX-710 router
• ERX-705 router
• ERX-310 router
All models use the same software. For information about the differences
between the models, see Chapter 1, E-Series Overview.
In the E-series documentation, the term ERX-14xx models refers to both
the ERX-1440 router and the ERX-1410 router. Similarly, the term
ERX-7xx models refers to both the ERX-710 router and the ERX-705
router. The terms ERX-1440 router, ERX-1410 router, ERX-710 router,
ERX-705 router, and ERX-310 router refer to the specific models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Documentation xvii
E-Series Routers
Table 2 Text conventions (except for command syntax) (continued)
Convention
Description
Examples
Italics
•
•
•
Emphasize words.
•
There are two levels of access,
user and privileged.
Identify variables.
•
•
clusterId, ipAddress.
Identify chapter, appendix, and
book names.
Appendix A, System Specifications.
Table 3 Syntax conventions in Command Reference Guide
Convention
Description
Examples
Words in plain text
Words in italics
Represent keywords.
Represent variables.
terminal length
mask, accessListName
diagnostic | line
Words separated by the | symbol
Represent a choice to select one
keyword or variable to the left or
right of this symbol. (The keyword or
variable may be either optional or
required.)
Words enclosed in [ brackets ]
Words enclosed in [ brackets ]*
Represent optional keywords or
variables.
[ internal | external ]
[ level1 | level2 | l1 ]*
Represent optional keywords or
variables that can be entered more
than once.
Words enclosed in { braces }
Represent required keywords or
variables.
{ permit | deny } { in | out }
{ clusterId | ipAddress }
Documentation
The E-Series Installation Quick Start poster is shipped in the box with all
new routers. This poster provides the basic procedures to help you get the
router up and running quickly.
With each software release, we provide the E-Series Routers
Documentation CD (formerly ERX Edge Routers Documentation CD).
The documentation CD contains the document set in PDF format and
HTML format (with and without frames). From the HTML files, you can
also access PDF files of individual chapters and appendixes.
The documentation is also available on the Web. You can order a set of
printed documents from your Juniper Networks sales representative.
The document set comprises the following books:
• E-Series Installation and User Guide – Provides the necessary
procedures for getting the router operational, including information on
installing, cabling, powering up, configuring the router for
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
About This Guide
management access, and general troubleshooting. Describes SRP
modules, line modules, and I/O modules available for the E-series
routers, and provides information about the compatibility of line
modules and I/O modules with software releases. Lists the layer 2
protocols, layer 3 protocols, and applications that line modules and
their corresponding I/O modules support.
• E-Series System Basics Configuration Guide – Describes planning and
configuring your network, managing the router, configuring passwords
and security, configuring the router clock, and configuring virtual
routers. Includes a list of references that provide information on the
protocols and features supported by the router.
• E-Series Physical Layer Configuration Guide – Describes configuring
physical layer interfaces.
• E-Series Link Layer Configuration Guide – Describes configuring link
layer interfaces.
• E-Series Routing Protocols Configuration Guide, Vol. 1 – Provides
information about configuring routing policy and configuring IP, IP
routing, and IP security.
• E-Series Routing Protocols Configuration Guide, Vol. 2 – Describes
BGP routing, MPLS, BGP-MPLS VPNs, and encapsulation of layer 2
services.
• E-Series Policy and QoS Configuration Guide – Provides information
about configuring policy management and quality of service (QoS).
• E-Series Broadband Access Configuration Guide – Provides
information about configuring remote access.
• E-Series Command Reference Guide A to M; E-Series Command
Reference Guide N to Z – Together comprise the E-Series Command
Reference Guide. Contain important information about commands
implemented in the system software. Use to look up command
descriptions, command syntax, a command’s related mode, or a
description of a command’s parameters. Use with the E-series
configuration guides.
• E-Series Product Overview Guide – Gives a thorough overview of the
router from a software and hardware perspective. It provides
illustrations and configuration examples that present the “big picture.”
Download from Www.Somanuals.com. All Manuals Search And Download.
Comments About the Documentation xix
E-Series Routers
MIBS
Copies of the MIBs available in a software release are included on the
JUNOSe Software CD (formerly ERX Edge Routers Software CD) and on
the Web.
Release Notes
Release notes are included on the corresponding software CD and are
available on the Web.
In the Release Notes, you will find the latest information about features,
changes, known problems, resolved problems, and system maximum
values. If the information in the Release Notes differs from the
information found in the documentation set, follow the Release Notes.
Abbreviations
Web Access
A complete list of abbreviations used in this document set, along with
their spelled-out terms, is provided in the E-Series System Basics
Configuration Guide, Appendix A, Abbreviations and Acronyms.
To view the documentation on the Web, go to:
Comments About the Documentation
We encourage you to provide feedback, comments, and suggestions so
that we can improve the documentation to better meet your needs. Please
e-mail your comments to:
Along with your comments, be sure to indicate:
• Document name
• Document part number
• Page number
• Software release version
Download from Www.Somanuals.com. All Manuals Search And Download.
xx
About This Guide
Contacting Customer Support
For technical support, contact Juniper Networks at [email protected],
or at 1-888-314-JTAC (within the United States) or 408-745-9500 (from
outside the United States).
Download from Www.Somanuals.com. All Manuals Search And Download.
|