JLDWW 1206
Dishwasher
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
• Keep all detergents in a safe place out of
children’s reach.
• Keep children well away from the
dishwasher when the door is open.
• The water in your dishwasher is not for
drinking. Detergent residues may still be
present in your machine.
• Ensure that the door of the dishwasher is
always closed when it is not being loaded
or unloaded. In this way you will avoid
anybody tripping over the open door and
hurting themselves.
Correct use
• This dishwasher is only intended for
washing household utensils suitable for
machine washing.
• Do not sit or stand on the open door.
• Do not put any solvents in the dishwasher.
This could cause an explosion.
• Knives and other items with sharp points
must be loaded in the cutlery basket with
their points down or placed in a horizontal
position in the upper basket.
Maintenance and cleaning
• For information on maintenance and
cleaning your dishwasher see the specific
chapter in this instruction manual.
Service
• This product should be serviced by an
authorized service engineer, and only
genuine spare parts should be used.
• Only use products (detergent, salt and
rinse aid) suitable for dishwashers.
• Avoid opening the door whilst the
appliance is in operation, hot steam may
escape.
• Do not take any dishes out of the
dishwasher before the end of the washing
cycle.
• After use, isolate the appliance from the
power supply and turn off the water supply.
• This product should be serviced only by an
authorized service engineer, and only
genuine spare parts should be used.
Ecological hints
To save water and energy and help protect
the environment, we recommend that you
follow these hints:
• Ensure that the water softener is correctly
adjusted.
• Do not prewash under running water.
• Select the wash programme to suit the
nature and degree of the soiling on the
dishes.
• Do not use more detergent, dishwasher
salt and rinse aid than is recommended in
these operating instructions and by the
manufacturer of the respective product.
• Under no circumstances should you
attempt to repair the machine yourself.
Repairs carried out by inexperienced
persons could cause injury or serious
malfunctioning. Contact your local repair
agent. Always insist on genuine spare parts.
• Delay start: When possible programme
your dishwasher to run over night, to
enable, for example, the use of economical
overnight electricity tariffs.
General safety
• Dishwasher detergents can cause chemical
burns to eyes, mouth and throat. Could
endanger life! Comply with the safety
instructions of the dishwasher detergent
manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• 45°-70° Auto Wash Programme: This The symbol
machine is fitted with a turbidity sensor
packaging indicates that this product may not
which intelligently adjusts the temperature be treated as household waste. Instead it
on the product or on its
and rinsing cycles during the wash
programme, depending on the degree of
should be taken to the appropriate collection
point for the recycling of electrical and
soiling on the dishes. This helps to reduce electronic equipment. By ensuring this
energy and water consumption on lightly
soiled loads.
• Half load: This option is useful and
economical when baskets are not fully
loaded.
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Environmental
information
The packaging materials are environmentally
friendly and can be recycled. The plastic
components are identified by markings, e.g.
>PE<, >PS<, etc. Please dispose of the
packaging materials in the appropriate
container at the community waste disposal
facilities.
When a unit is no longer being used:
• Pull the plug out of the socket.
• Cut off the cable and plug and
dispose of them.
• Dispose of the door catch. This
prevents children from trapping
themselves inside and endangering
their lives.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
For the user
For the installer
Important safety information
2
6
Technical data
27
Description of the appliance
Installation
Unpacking
Fitting under a counter
Levelling
27
27
27
28
Control panel
Menu options
7
8
Washing programmes
9
Water connections
Water supply connections
Water inlet hose with safety valve
Water outlet hose connection
28
28
29
29
When the dishwasher is first
installed
The water softener
Filling with dishwasher salt
Filling with rinse aid
Adjusting the rinse aid dosage
10
10
12
12
13
Electrical connection
31
Repairs - After sales service 31
Daily use
14
14
15
15
16
Loading cutlery and dishes
The lower basket
The cutlery basket
The upper basket
Adjusting the height of the upper basket 17
Use of detergent
17
Guide to use the
instruction manual
The following symbols will be found in the text
to guide you throughout the instructions:
Multi tab function
18
Select and start a washing
programme
19
22
Unloading the dishwasher
Safety instructions
Hints and tips
Maintenance and cleaning
Cleaning the filters
External cleaning
22
22
23
23
Internal cleaning
Environmental information
Something not working
24
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1. Upper basket
10. Worktop
This dishwasher has an internal light
2. Water hardness dial
3. Salt container
4. Detergent dispenser
5. Rinse aid dispenser
6. Rating plate
7. Filters
8. Lower spray arm
9. Upper spray arm
that turns on when the door opens,
and off when it closes.
Internal light is equipped with led lamp
CLASS 1 in accordance with EN
60825-1: 1994 + A1: 2002 + A2:2001.
In case this light has to be replaced,
please, contact your local repair agent.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
6
1. On/Off button
2. Programme scrolling buttons
3. Multi tab button
4. Half load button
5. Delay start button
6. Display
When using this option we recommend that
you reduce the dose of detergent that is
normally used for a complete load.
Press the half load button to activate the
option:
• the half load option is NOT available with
''45°-70° Auto'' programme; the half load
indicator light will not illuminate when the
half load button is pressed and the message
NOT SELECTABLE will appear on the
display.
• the half load option is available with all the
other programmes; the half load indicator
light illuminates when the half load button
is pressed and the message HALF
LOAD appears on the display. This option
has no impact on some washing
A sequence of displayed messages and
audible signals will guide you in the
setting up of the appliance and the
selection of washing programme and
options.
Half load button
This option is useful and economical when
baskets are not fully loaded. It reduces the
consumption of water and energy.
programmes. Refer to ''Washing
Remember to load both baskets.
programmes'' section.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The appliance will return to the
programme menu if an option is not
selected within a few seconds.
Menu options
Setting an option is possible ONLY with the
appliance in setting mode.
The message CHOOSE PROGRAMME
on the display indicates that the appliance is in
setting mode.
It will NOT be possible to enter the menu
options when:
• A washing programme and a delay start
have already been set or are in progress.
Cancel the programme and delay start to
return to setting mode.
• The washing programme has just ended.
Switch off the appliance and then switch it
on again; the appliance is in setting mode.
To enter the menu options:
• Simultaneously press and hold the
programme scrolling buttons until option
language appears flashing in the display.
• With the button on your left you can skip
to another option;
• with the button on your right you enter the
sub menu.
• To confirm the selection made wait a few
seconds and the appliance will return to
programme setting.
Menu options
Language
Submenu
Allows you to select the language for the display
of the messages
Sound volume
5 levels available
level 0 = volume deactivated (ALL audible signals
are deactivated)
Brightness
10 levels available
10 levels available
Contrast
Water hardness
Allows you to set the water softener according to
the hardness of the water in your area.
10 levels available
Allows you to reactivate the rinse aid dispenser.
0 = rinse aid dispenser deactivated
1 = rinse aid dispenser activated.
Rinse aid
Available only with the Multi tab function active.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Programme
Degree of soil
Type of load
Programme description
Prewash
Main wash up to 70°C
Crockery,
70° Intensive
Heavy soil
cutlery, pots and 2 intermediate rinses
pans
Final rinse
Drying
Prewash
Crockery,
Main wash up to 45°C or 70°C
1)
Any
cutlery, pots and 1 or 2 intermediate rinses
45°-70° Auto
pans
Final rinse
Drying
Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Crockery and
cutlery
2)
Normal soil
50° Bio
Drying
Crockery and
cutlery
Main wash up to 60°C
Final rinse
3)
Normal or light soil
Normal soil
60° Quick
Main wash up to 45°C
Delicate crockery 1 intermediate rinse
and glassware
Glass
Final rinse
Drying
1 cold rinse (to avoid food scraps from
sticking).
This programme does not require the
use of detergent.
Partial load (to be
completed later
in the day).
Prewash
Any.
1) During the Auto washing programme the level of soiling on the dishes is determined by how cloudy the water is.
The programme duration, water and energy consumption levels can vary; this depends upon whether the appliance
is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically
adjusted between 45°C and 70°C.
2) Test programme for test institutes.
3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a
family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
Half load option available with programme:
70° Intensive
45°-70° Auto
50° Bio
YES (impact on washing programme)
NO (not selectable)
YES (impact on washing programme)
YES (no impact on washing programme)
YES (no impact on washing programme)
60° Quick
Glass
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Half load option available with programme:
Prewash
YES (no impact on washing programme)
1)
Consumption values
Programme
Programme
duration
(in minutes)
Energy
consumption
(in kWh)
Water consumption
(in litres)
70° Intensive
45°-70° Auto
110 - 120
90 - 115
150 - 160
30
1,8 - 2,0
1,1 - 1,5
1,0 - 1,2
0,9
23 - 25
12 - 23
12 - 14
9
2)
50° Bio
60° Quick
Glass
60 - 70
12
0,8 - 0,9
0,1
14 - 15
4
Prewash
1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water
and also by the variations of the power supply and the amount of dishes.
2) Test programme for test institutes.
When the dishwasher is first
installed
Before using your dishwasher for the first
time:
The water softener
The dishwasher is equipped with a water
• Ensure that the electrical and water
softener designed to remove minerals and
connections comply with the installation
salts from the water supply, which would have
instructions
a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
• Remove all packaging from inside the
appliance
• Set the water softener level
salts, the harder your water is. Water
• Pour 1 litre of water into the salt container hardness is measured in equivalent scales,
and then fill with dishwasher salt
• Fill the rinse aid dispenser
Clarke degrees, French degrees (°TH) and
mmol/l (millimol per litre - international unit
for the hardness of water).
If you want to use combi detergent
tablets such as "3 in 1", "4 in 1", "5 in 1"
etc... set the Multi tab function (see
"Multi tab function").
The softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the water hardness
setting
Water hardness
Use of salt
Clarke
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
°TH
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
mmol/l
9,1 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
manually
electronically
level 10
level 9
2
2
2
2
2
2
1
1
1
1
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
level 8
level 7
level 6
level 5
level 4
level 3
level 2
< 5
< 7
level 1
Setting the water
softener
The water softener must be set in two ways:
manually, using the water hardness dial and
electronically in menu options.
Setting manually
The dishwasher is factory set at
position 2.
Setting electronically
The dishwasher is factory set at level 5.
Menu options: Water hardness
With the help of the chart, set the level of the
water softener according to the hardness of
the water in your area.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to position 1
or 2 (see table above).
4. Replace the lower basket.
Download from Www.Somanuals.c1om1. All Manuals Search And Download.
5. Replace the cap tightly turning it clockwise
until it stops with a click.
Filling with dishwasher
salt
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
Warning! Only use salt specifically
designed for use in dishwashers. All
other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the
water softener. Only fill with salt just
before starting one of the complete
washing programmes. This will
prevent any grains of salt or salty
water, which may have been spilt,
remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
The salt container will require topping up
periodically. You are reminded of this by a
displayed message.
This occurs only at the start and at the end of
the washing programme; during the running of
the programme the indication for salt refilling
is not active.
The refilling salt message can remain
visible for 2-6 hours after the salt has
been replenished, assuming the
dishwasher remains switched on. If
you are using salt that takes longer to
dissolve then this can take longer. The
operation of the machine is not
affected.
To fill:
1. Open the door, remove the lower basket
and unscrew the cap of the salt container
by turning it anticlockwise.
2. Pour 1 litre of water into the container
(this is necessary only before filling
with salt for the first time).
Filling with rinse aid
3. Using the funnel provided, pour in the salt
until the container is full.
Warning! Only use branded rinse aid
for dishwashers.
Never fill the rinse aid dispenser with
any other substances (e.g. dishwasher
cleaning agent, liquid detergent). This
would damage the appliance.
Rinseaidensuresthorough rinsing, and
spot and streak free drying.
Rinse aid is automatically added during
the last rinse.
1. Open the container by pressing the
release button (A).
4. Replace the cap making sure that there is
no trace of salt on the screw thread or on
the gasket.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the rinse aid
dosage
According to the finish and drying results
obtained, adjust the doseofrinse aidbymeans
of the 6 position selector (position 1=
minimum dosage, position 6= maximum
dosage).
2. Add the rinse aid in the container. The
maximum level for filling is indicated by
"max".
The dose is factory set in position 4.
Increase the dose if there are drops of water
or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on
the dishes or a bluish film on glassware or knife
blades.
The rinse aid container will require
topping up periodically. You are
reminded of this by a displayed
message. This occurs only at the start
and at the end of the washing
programme; during the running of the
programme the indication for rinse aid
refilling is not active.
The dispenser holds about 110 ml of rinse
aid, which is sufficient for between 16 and
40 dishwashing cycles, depending upon
the dosage setting.
3. Ensure that the lid is closed after every
refill.
Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid
excess foaming during the next wash.
Download from Www.Somanuals.c1om3. All Manuals Search And Download.
Daily use
• Check if it's necessary to refill with
dishwasher salt or rinse aid.
• When loading the dishes andcutlery, please
note:
• Open the door and slide out the baskets to
load the dishes.
– Dishes and cutlery must not impede the
rotation of the spray arms.
• Load cutlery and dishes into the
dishwasher.
• Fill with dishwasher detergent.
• Select a wash programme suitable for the
cutlery and dishes.
• Start the wash programme.
– Load hollow items such as cups, glasses,
pans, etc. with the opening downwards
so that water cannot collect in the
container or a deep base.
– Dishes and items of cutlery must not lie
inside one another or cover each other.
– To avoid damage to glasses, they must
not touch.
– Lay small objects in the cutlery basket.
Loading cutlery and
dishes
Sponges, household cloths and any object that
can absorb water may not be washed in the
dishwasher.
• Plastic items and pans with non stick
coatings have a tendency to retain water
drops; these items will not dry as well as
porcelain and steel items.
• Before loading the dishes, you should:
– Remove all left over food and debris.
– Soften remnants of burnt food in pans
• Light items (plastic bowls etc.) must be
loaded in the upper basket and arranged so
they do not move.
For washing in the dishwasher the following cutlery and dishes
are not suitable:
are of limited suitability:
• Cutlery with wooden, horn, china or mother- • Only wash stoneware in the dishwasher if it is
of-pearls handles.
specially marked as being dishwasher-safe by
the manufacturer.
• Plastic items that are not heat resistant.
• Glazed patterns may fade if machine washed
frequently.
• Older cutlery with glued parts that are not
temperature resistant.
• Silver and aluminium parts have a tendency to
discolour during washing: Residues, e.g. egg
white, egg yolk and mustard often cause
discolouring and staining on silver. Therefore
always clean left-overs from silver immediately,
if it is not to be washed straight after use.
• Bonded cutlery items or dishes.
• Pewter or copper items.
• Lead crystal glass.
• Steel items prone to rusting.
• Wooden platters.
• Items made from synthetics fibres.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The lower basket
The lower basket is designed to take
saucepans, lids, plates, salad bowls, cutlery,
etc.
Serving dishes and large lids should be
arranged around the edge of the basket,
ensuring that the spray arms can turn freely.
The cutlery basket
Warning! Long bladed knives stored
in an upright position are a potential
hazard. Long and/or sharp items of
cutlery such as carving knives must be
positioned horizontally in the upper
basket. Take care when loading or
unloading sharp items such as knives.
Forks and spoons should be placed in
the removable cutlery basket with the
handles facing downwards and the
knives with their handles facing
upwards
The rows of prongs in the lower basket can
lie flat to allow you to load pots, pans and
bowls.
Download from Www.Somanuals.c1om5. All Manuals Search And Download.
If the handles protrude from the bottom of
the basket, obstructing the lower spray arm,
load the cutlery with the handles facing
upwards. Mix spoons with other cutlery to
prevent them from sticking together.
For best results we recommend you use the
cutlery grids. If the size and dimensions of the
cutlery do not allow the use of the grids, they
can be easily hidden or removed.
Glasses with long stems can be placed upside
down in the cup racks.
For taller items, the cup racks can be folded
upwards.
For glasses with long stems (according to the
size and dimensions), set the glass holder to
the left or right position.
The upper basket
The upper basket is designed for saucers,
salad bowls, cups, glasses, pots and lids.
Arrange items on and underneath the cup
racks so that water can reach all surfaces.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To lower the basket to the original
position proceed as follows:
Before closing the door, ensure that
the spray arms can rotate freely.
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then
allow the mechanism to drop back down
slowly, keeping hold of it.
Adjusting the height of
the upper basket
If washing very large plates you can load them
in the lower basket after moving the upper
basket to the higher position.
Never lift or lower the basket on
one side only.
When the upper basket is raised
you will not be able to use the
cup racks.
Maximum height of the dishes in the
lower basket
With upper basket
31 cm
Warning! After loading your
machine always close the door, as an
open door can be a hazard.
raised
With upper basket
27 cm
lowered
To move to the higher position
proceed as follows:
1. Pull out the basket until it stops.
Use of detergent
Only use detergents specifically
designed for use in dishwashers.
Please observe the manufacturer’s
dosing and storage recommendations
as stated on the detergent packaging.
2. Carefully lift both sides upwards until the
mechanism is engaged and the basket is
stable.
Fill with detergent
1. Open the lid.
Download from Www.Somanuals.c1om7. All Manuals Search And Download.
3. All programmes with prewash need an
additional detergent dose (5/10 g) that
must be placed in the prewash detergent
chamber (2). This detergent will be used
during the prewash phase.
When using detergent tablets; place the
tablet in compartment (1).
2. Fill the detergent dispenser (1) with
detergent. The marking indicates the
dosing levels:
Detergent tablets
Detergent tablets from different
manufacturers dissolve at different
rates. For this reason, some detergent
tablets do not attain their full cleaning
power during short washing
programmes. Therefore, please use
long washing programmes when using
detergent tablets, to ensure the
complete removal of detergent
residuals.
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent
Multi tab function
This appliance is equipped with the Multi tab depending on which kind of tablets you
function, that allows the use of combi
detergent tablets.
These products are detergents with a
choose ("3 in 1", "4 in 1", "5 in 1" etc...).
Check whether these detergents are suitable
for your water hardness. See the
combined cleaning, rinsing and salt functions. manufacturers instructions.
They can also contain other different agents
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Once this function is selected it will remain
active for all following wash programmes.
To deactivate the function press the Multi-tab
button again until the Multi tab indicator light
With the selection of this function the inflow turns off.
of rinse aid and salt from each respective
If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
supply container is automatically deactivated
and also the indicator lights for salt and rinse
aid are deactivated.
When using the Multi tab function, the cycle
durations may change. If this is the case, the
running time for the programme is
3. Set the rinse aid dosage to position
2.
automatically updated on the digital display.
• The activation/deactivation of the
rinse aid dispenser is only possible
with the Multi tab function active.
Activate/deactivate the Multi tab
function before the start of a washing
programme.
Once the programme is running, the
Multi tab function can NO longer be
changed. If you want to cancel the
Multi tab function you have to cancel
the programme setting and then
deactivate the Multi tab function.
In this case you have to set a washing
programme (and desired options)
again.
If you decide to revert back to the use
of individual detergents we advise that
you:
1. Deactivate the Multi tab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness setting
to the highest setting and perform
1 normal washing programme
without loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the
water in your area.
Activation/deactivation
of the Multi tab function
Press the Multi tab button, the corresponding
indicator light illuminates. This means that the
function is active.
5. Adjust the rinse aid dosage.
Select and start a washing
programme
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate.
2. Check that the water tap is opened.
Download from Www.Somanuals.c1om9. All Manuals Search And Download.
Once the delay start has elapsed the
programme will start automatically.
Set the washing programme, delay
start and half load with the dishwasher
door slightly open.
The selection can also occur with the
door closed. Keep in mind that this
way you have ONLY 3 seconds
between one selection and another,
after which the washing programme
will start automatically.
If during the progress of the delay start
or the running of the washing
programme you wish to see which
programme has been set or is
performing; press one of the
programme scrolling buttons. The
name of the programme will appear
for a few seconds in the display.
3. Switch on the dishwasher. The appliance
must be in setting mode: message
CHOOSE PROGRAMME displayed.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it’s absolutely
necessary. Attention! Hot steam
may escape when the door is
opened. Open the door carefully.
4. Select the washing programme by
pressing one of the programme scrolling
buttons.
If a button is pressed only once, the last
performed washing programme will be
proposed.
5. If required, postpone the start time of the
washing programme by using the delay
start option. The start of the washing
programme can be delayed for between 1
and 19 hours.
6. Close the dishwasher door, the
programme starts automatically. Once
the programme is running the display
shows:
Cancelling a delay start or
a washing programme in
progress
• To cancel a washing programme or a delay
start in progress you have to reset the
appliance.
Cancelling a delay start will also cancel
a washing programme. You have to set
the washing programme again.
– the phases of the progress of the
programme,
– updates the running time of the
programme.
7. If the start of the programme has been
postponed, the countdown will start
automatically once the dishwasher door is
closed.
• Simultaneously press and hold the two
buttons positioned over the word Cancel
until the message CHOOSE
PROGRAMME appears on the display.
The washing programme or the delay start
has been cancelled.
The countdown will decrease in steps of
1 hour.
Opening the door will interrupt the
countdown. Close the door; the
countdown will continue from the point at
which it was interrupted.
• If a new washing programme is to be
selected, check that there is detergent in
the detergent dispenser.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Switch off the dishwasher.
Interrupt a washing
programme in progress
• Open the dishwasher door; the
programme will stop. Close the door; the
programme will start from the point at
which it was interrupted.
• Press the On/Off button; all lights will turn
off. Press the On/Off button again; the
programme will start from the point at
which it was interrupted
2. Open the dishwasher door and leave it
ajar. Wait a few minutes before removing
the dishes; this way they will be cooler and
the drying will be improved.
When the washing programme
has finished, it is recommended
that the dishwasher is unplugged
and the water tap turned off.
End of the washing
programme
• The dishwasher will automatically stop and
an audible signal informs you of the end of
the washing programme. (No audible signal
if the sound volume option has been
deactivated).
• The message PROGRAMME END
appears on the display.
The dishwasher’s drying system is
provided with a device that allows air
to circulate inside the dishwasher to
prevent residual steam recondensing
on the dishes as water droplets.
Once the washing programme has
ended this device operates
intermittently for another 20
minutes, as long as the
dishwasher is switched on.
If the On/Off button is pressed or the
door is opened during these 20
minutes, the device will be
automatically cancelled.
Download from Www.Somanuals.c2om1. All Manuals Search And Download.
Unloading the dishwasher
• Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
• Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
• Water may appear on the sides and the
door of the dishwasher as the stainless steel
will eventually become cooler than the
dishes.
Maintenance and cleaning
Cleaning the filters
The filters must be checked and cleaned from
time to time. Dirty filters will degrade the
washing result.
A displayed message will periodically
appear to remind you to clean the
filters.
Warning! Before cleaning the
filters ensure that the machine is
switched off.
1. Open the door, remove the lower basket.
3. Turn the handle about 1/4 a turn
2. The dishwasher filter system comprises a
coarse filter (A), a microfilter (B) and a
flat filter. Unlock the filter system using the
handle on the microfilter.
anticlockwise and remove the filter
system.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
flat filter does not protrude above the
base of the washing compartment.
NEVER use the dishwasher
without filters.
Incorrect repositioning and fitting of
the filters will produce poor washing
results and will result in damage to the
appliance.
NEVER try to remove the spray
arms.
If residues of soil have clogged the
holes in the spray arms, remove the
debris with a cocktail stick.
4. Take hold of the coarse filter (A) by the
handle with the hole and remove from the
microfilter (B).
5. Clean all filters thoroughly under running
water.
6. Remove the flat filter from the base of the
washing compartment and clean both
faces thoroughly.
External cleaning
Clean the external surfaces of the machine
and control panel with a damp soft cloth. If
necessary use only neutral detergents. Never
use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc...).
Internal cleaning
Ensure that the seals around the door, the
detergent and rinse aid dispensers are cleaned
regularly with a damp cloth.
We recommend every 3 months you run the
wash programme for heavy soiled dishes using
detergent but without dishes.
Prolonged periods of non-
operation
If you are not using the machine for a
prolonged period of time you are advised to:
1. Unplug the appliance and then turn off the
water.
2. Leave the door ajar to prevent the
formation of any unpleasant smells.
7. Put the flat filter back in the base of the
washing compartment and ensure that it
fits perfectly.
8. Place the coarse filter (A) in the
microfilter (B) and press together.
9. Put the filter combination in place and lock
by turning the handle clockwise to the
stop. During this process ensure that the
3. Leave the inside of the machine clean.
Download from Www.Somanuals.c2om3. All Manuals Search And Download.
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge
hoses.
4. Pull the machine out together with the
hoses.
Frost precautions
Avoid placing the machine in a location where
the temperature is below 0°C. If this is
unavoidable, empty the machine, close the
appliance door, disconnect the water inlet
pipe and empty it.
Avoid over tilting the machine during
transportation.
Moving the machine
If you have to move the machine (moving
house, etc...):
Something not working
The dishwasher will not start or stops during
operation.
Important! If you call out an engineer to a
fault listed below, or to repair a fault caused
by incorrect use or installation, a charge will
be made even if the appliance is under
guarantee.
Certain problems are due to the lack of simple
maintenance or oversights, which can be
solved with the help of the indications
described in the chart, without calling out an
engineer.
Switch off the appliance and carry out the
following suggested corrective actions.
Fault code and malfunction
Possible cause and solution
1)
•
•
• The water tap is blocked or furred with limescale.
Clean the water tap.
intermittent audible signal is active
appears in the digital display
• The water tap is turned off.
Turn the water tap on.
• message OPEN THE TAP
displayed
• The filter (where present) in the threaded hose fitting at
the water inlet valve is blocked.
Clean the filter in the threaded hose.
The dishwasher does not fill with
water
• The water inlet hose has not been correctly laid or it is
bent or squashed.
Check the water inlet hose connection.
1)
•
•
• The sink spigot is blocked.
Clean out the sink spigot.
intermittent audible signal is active
appears in the digital display
• The water drain hose has not been correctly laid or it is
bent or squashed.
Check the water drain hose connection.
• message DRAIN BLOCKED
displayed
The dishwasher will not drain
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Fault code and malfunction
Possible cause and solution
1)
•
•
• Close the water tap and contact our extended warranty
administrators, refer to Repairs-After Sales Service on the
following pages.
intermittent audible signal is active
appears in the digital display
• message SERVICE NUMBER
displayed
Anti-flood device is activated
1) Audible signals not active if option sound volume has been deactivated.
Malfunction
Possible cause and solution
The programme does not start
• The dishwasher door has not been properly closed.
(Message CLOSE THE DOOR displayed).
Close the door.
• The main plug is not plugged in.
Insert the main plug.
• The fuse has blown out in the household fuse box.
Replace the fuse.
• Delay start has been set.
If dishes are to be washed immediately, cancel the delay
start.
Once these checks have been carried out
switch on the appliance.
warranty administrators, refer to section
''Repairs - After Sales Service''.
The programme will continue from the point
at which it was interrupted.
If the malfunction/fault code reappears or if
other fault codes not described in the charts
appear, please contact our extended
The wash results are not satisfactory
The dishes are not clean
• The wrong programme has been selected.
• The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.
• The spray arms do not rotate freely due to incorrect
arrangement of the load.
• The filters in the base of the washing compartment are
dirty or incorrectly positioned.
• Too little or no detergent has been used.
• Where there are limescales deposits on the dishes; the
salt container is empty or the incorrect level of the water
softener has been set.
• The drain hose connection is not correct.
• The salt container cap is not properly closed.
Download from Www.Somanuals.c2om5. All Manuals Search And Download.
The wash results are not satisfactory
The dishes are wet and dull
• Rinse aid was not used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or a • Decrease rinse aid dosage.
bluish coating on glasses and dishes
Water drops have dried onto
glasses and dishes
• Increase rinse aid dosage.
• The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Dimensions
Width
Height
Depth
60 cm
85 cm
61 cm
Electrical connection - Voltage - Overall Information on the electrical connection is given on the
power - Fuse
rating plate on the inner edge of the dishwasher door.
Water supply pressure
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Capacity
Weight
12 place settings
47,8 kg
Installation
Warning! It is dangerous to alter the
specifications or attempt to modify this
product in any way.
This appliance is heavy. Care should be
taken when moving it.
Care must be taken to ensure that the
appliance does not stand on the
electrical supply cable.
Fitting under a counter
(Kitchen worktop or sink)
By removing the machine’s worktop, you can
install it under a close fitting sink unit or a pre-
existing top, providing the dimensions of the
recess correspond to those shown in the
picture.
Any electrical work required to install
this appliance must be carried out by a
qualified electrician or competent
person.
Any plumbing work required to install
this appliance must be carried out by a
qualified plumber or competent
person.
Unpacking
• Remove all packaging before positioning
the machine.
• If possible, position the machine next to a
water tap and a drain.
Download from Www.Somanuals.c2om7. All Manuals Search And Download.
Proceed as follows:
Remove the machine’s worktop by
Insert the machine after adjusting the levelling
with the adjustable feet. When inserting the
unscrewing the two rear retaining screws (1), machine, ensure that the water inlet and drain
pull the worktopfrom the back of the machine hoses are not kinked or squashed.
(2) and slide out the front slots, lifting the
worktop (3).
During all operations that involve accessibility
to internal components the dishwasher has to
be unplugged.
Be sure that once the appliance has been
installed, it is easily accessible for the service
engineer in the event that a repair is required.
If the dishwasher is later used as a free-
standing appliance, the original worktop must
be re-mounted.
The plinth on free-standing appliances is not
adjustable.
Levelling
Good levelling is essential for correct closure
and sealing of the door. When the appliance
is correctly levelled, the door will not catch on
either side of the cabinet. If the door does not
close correctly, loosen or tighten the
adjustable feet until the machine is perfectly
level.
Water connections
A hot water supply is not always efficient with
heavily soiled crockery as it shortens the
washing programmes a lot.
For making the connection itself, the coupling
nut fitted to the machine’s supply hose is
designed to screw onto a 3/4" gas thread
Water supply
connections
This dishwasher may be fed with either hot
(max. 60°) or cold water. Nevertheless we
advise you use a cold water supply.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
spout or to a purpose made quick-coupling
tap such as the Press-block.
• The electrical cable for the safety valve is in
the double-walled water inlet hose. Do not
immerse the water inlet hose or the safety
valve in water.
• If water inlet hose or the safety valve is
damaged, remove the mains plug
immediately.
The water pressure must be within the limits
given in the "Technical data". Your local
Water Authority will advise you on the
average mains pressure in your area.
The water inlet hose must not be kinked,
crushed, or entangled when it is being
connected.
• A water inlet hose with safety valve must
only be replaced by a local repair agent.
The dishwasher features fill and drain hoses
which can be turned either to the left or the
right to suit the installation by means of the
locknut. The locknut must be correctly
fitted to avoid water leaks. (Attention!
NOT all models of dishwashers have fill and
drain hoses provided with a locknut.)
If the machine is connected to new pipes or
pipes which have not been used for a long
time, you should run the water for a few
minutes before connecting the inlet hose.
DO NOT use connection hoses which
have previously been used on an old
appliance.
Warning! Dangerous voltage
This appliance has been fitted with
safety features which will prevent the
water used in the appliance from
returning back into the drinking water
system. This appliance complies with
the applicable plumbing regulations.
Water outlet hose
connection
The end of the drain hose can be connected
in the following ways:
Water inlet hose with
safety valve
After connecting the double-walled water
inlet hose, the safety valve is next to the tap.
Therefore the water inlet hose is only under
pressure while the water is running. If the
water inlet hose starts to leak during this
operation, the safety valve cuts off the running
water.
1. To the sink outlet spigot, securing it to the
underside of the work surface. This will
prevent waste water from the sink running
into the machine.
2. To a stand pipe provided with venthole,
minimum internal diameter 4 cm.
The waste connection must be at a height of
between 30 cm (minimum) and 100 cm
(maximum) from the bottom of the
dishwasher.
Please take care when installing the water inlet
hose:
Download from Www.Somanuals.c2om9. All Manuals Search And Download.
When connecting the drain hose to an
under sink trap spigot, the entire
plastic membrane (A) must be
removed. Failure to remove all the
membrane will result in food particles
building up over time eventually
blocking the dishwasher drain hose
spigot.
The drain hose can face either to the right or
left of the dishwasher.
Ensure the hose is not bent or squashed as this
could prevent or slow down the discharge of
water.
The sink plug must not be in place when the
machine is draining as this could cause the
water to syphon back into the machine.
If you use a drain hose extension it must be
no longer than 2 metres and its internal
diameter must be no smaller than the
diameter of the hose provided.
Likewise the internal diameter of the
couplings used for connections to the waste
outlet must be no smaller than the diameter
of the hose provided.
Our appliances are supplied with a
security device to protect against the
return of dirty water back into the
machine. If the spigot of your sink has
a "no return valve" incorporated this
can prevent the correct draining of
your dishwasher. We therefore advise
you to remove it. When connecting
the drain hose to an under sink trap
spigot, the entire plastic membrane
(A) must be removed. Failure to
remove all the membrane will result in
food particles building up over time
eventually blocking the dishwasher
drain hose spigot
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Warning! Safety standards require
the appliance to be earthed.
Prior to using the appliance for the first
time, ensure that the rated voltage and
type of supply on the rating plate
match that of the supply where the
appliance is to be installed. The fuse
rating is also to be found on the rating
plate.
Always plug the mains plug into a
correctly installed shockproof socket.
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic wiring
system socket replaced. In case that
the electrical cable has to be replaced,
contact your local repair agent.
The plug must be accessible after the
appliance has been installed.
Never unplug the appliance by pulling
on the cable. Always pull the plug.
The manufacturer accepts no liability
for failure to observe the above safety
precautions.
Repairs - After sales service
If the unlikely eventofyourappliance requiring Before calling out an engineer, please ensure
service, or if you wish to purchase spare parts, you have read the details under the heading
please contact our extended warranty
administrators by telephoning:
0870 010 7887
''Something Not Working''.
When you contact your local repair agent you
will need to give the following details:
They will give you details of your local Service
Force Centre.
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of fault.
Download from Www.Somanuals.c3om1. All Manuals Search And Download.
4. The purchase date (found on your
receipt).
Spare parts
Always insist on genuine spare parts.
An authorised service engineer should service
this product and only genuine spare parts
should be used.
5. The model and serial number of the
appliance (found on the rating plate).
So that you always have these numbers at
hand, we recommend that you make a note
of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S.No. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your dishwasher is covered by a 3 year parts
and labour guarantee (see separate details
given at point of sale). Please retain your
purchase receipt safely for the service
engineer to verify the purchase details.
Under no circumstances should you attempt
torepair the machine yourself. Repairscarried
out by inexperienced persons may cause
injury or serious malfunctioning. Contact your
local repair agent by telephoning:
0870 010 7887
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.c3om3. All Manuals Search And Download.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.c3om5. All Manuals Search And Download.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
117986660 - 01 - 062007 - Subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
|