Jet Tools Drill JFM 5 User Manual

JET JFM-5 Hollow Chisel Mortiser  
Cutting accurate mortises can be a challenging task. The JET JFM-5  
Hollow Chisel Mortiser is designed to produce extremely accurate  
mortises in a wide range of woods and project designs, plus make this an  
easy task for the woodworker. The JET JFM-5 Hollow Chisel Mortiser  
has been designed and built to extend its value by maintaining its  
performance for many years under the demands of even busy  
woodworking shops.  
We begin with a heavy-duty cast iron and steel frame for stability,  
accuracy and repeatability – not to mention long-term durability.  
Precision machining insures accuracy and smooth operation. The liberal  
use of cast iron gives the JET JFM-5 Hollow Chisel Mortiser a  
stabilizing mass of 267 pounds.  
The JET JFM-5 Mortiser is  
as tough as it is accurate  
and versatile.  
The massive powerhead casting slides on oversized dovetail keyways  
that feature easy to use Gib screw adjusters that allow the user to  
compensate for tiny amounts of wear should that occur in years to come. We also applied Gib  
screw adjusters to the X –Y material table motions to provide ultimate control over feel and  
long-term accuracy.  
Base Cabinet  
The JET JFM-5 Hollow Chisel Mortiser is mounted atop an all-steel,  
enclosed base cabinet. The cabinet is 14”-wide, 16”-deep, 23 ½”-tall and  
features an internal storage area for chisels, related tools and accessories.  
The base cabinet puts the JET JFM-5 Hollow Chisel Mortiser table  
surface at a comfortable 31 ½” height above the floor. The overall height  
of the JET JFM-5 Hollow Chisel Mortiser on its base cabinet is 61”.  
If mobility is a priority in your shop, the JET JFM-5 Hollow Chisel  
Mortiser  
can be placed in one of our universal mobile bases (#708118). The JET  
The all-steel base cabinet  
has storage for the auger &  
chisel sets and related  
tools. Add one of our  
universal mobile bases and  
the JFM-5 easily goes  
JFM-5 Hollow Chisel Mortiser can then be easily moved to the most  
efficient workspace that is available.  
where you can use it best.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Versatile Work Table  
The JET JFM-5 Hollow Chisel Mortiser features a large 20”-  
wide by 7”-deep cast iron worktable with a 3 ½”-tall fence at the  
rear. A pre-cut and drilled MDF table surface board is included  
that protects your bits when drilling through mortises.  
The worktable has built in X-axis (side to side) and Y-axis  
(front to back) movement functions that eliminate having to buy  
an X-Y vise. Movement of the table in the X and Y-axis are  
The large work table surface and the  
adjustable stop make cutting several  
mortises fast, easy and accurate.  
individually controlled by 5”-diameter handwheels, each  
with a spinner knob that speeds large changes. Tool-free  
adjustable stops on the X-axis makes cutting multiple  
mortises of the same size easy and accurate. We also  
include a fully adjustable work stop that attaches to the top  
of the fence from either side to make initial positioning of  
the material quick and repeatable.  
Because the worktable has a total movement of 16” on the  
X-axis (left to right) and 4” on the Y–axis (front to back)  
most mortise jobs can be clamped in place after initial  
Large handwheels provide smooth, accurate  
control over the table movements.  
positioning and all further adjustments done with the handwheels. That is a huge time saver,  
along with a boon to accuracy. The table movement gives the JET JFM-5 Hollow Chisel  
Mortiser a maximum chisel center to fence clearance of 4”.  
To hold the stock securely while mortising we added a heavy-duty  
quick-adjust screw clamp with a huge 2 5/8”-tall by 8”-long cast  
iron face. That face also has a pair of predrilled screw holes that  
make attaching an auxiliary face or shop-built jigs simple. The  
clamp is mounted directly to the table with a special pivoting  
mount. Being able to pivot the clamp simplifies securing many  
angled or oddly shaped work pieces, while the quick-adjust feature  
allows for fast set-up and adjustments.  
The large work vise has a special  
quick-adjust feature, plus it can be  
rotated to make clamping angled  
or odd shaped work pieces much  
Auger/Chisel Sets  
easier.  
Because so many woodworkers use one or two chisel sizes for their  
projects, we do not include a set that would contain unused pieces that add to the price  
unnecessarily. JET auger/chisel sets are available individually from your favorite JET dealer in  
¼” (#6285526), 5/16” (#6285527), 3/8” (#6285528), ½” (#6285529) and ¾” (#708594), or in a 5  
piece set (#708595).  
Download from Www.Somanuals.com. All Manuals Search And Download.  

IOGear Mouse M1308 User Manual
JBL Speaker System LSR6328P User Manual
Jura Capresso Coffee Grinder IMPRESSA X7 S User Manual
JVC Cassette Player KS F160 User Manual
JVC CD Player KS FX8R User Manual
JVC DVD Player XV N412S User Manual
Jwin DVD Player JD VD903 User Manual
Kenwood Bread Maker BM450 User Manual
Kenwood Oven SC102 2KM User Manual
Kettler Patio Furniture 1038 000 User Manual