Portable Docking Music System for iPod
Owner’s Manual
JiSS-100
(iPod Not Included)
Please read this Instruction Manual carefully before
using the unit and retain it for future reference
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
(Continued)
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long
periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in anyway, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15.The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet
ne contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.
16.Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the mains
plug should be disconnected form the mains socket outlet completely.
17.Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au
feu ou autres choses de semblable.
18.Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek
advice from your local qualified service technician or contact the distributor via the
telephone number at the back of this instruction manual.
19.To completely disconnect the power input, the mains plug of apparatus shall be
disconnected from the mains. The mains plug of apparatus should not be obstructed OR
should be easily accessed during intended use
Pour être complètement déconnecté de l'alimentation d'entrée, la prise doit être
débranchée du secteur. La prise du secteur ne doit pas être obstruée ou doit être
facilement accessible pendant son utilisation.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
needed.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
PROTECT YOUR FURNITURE!!
This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you
operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to
avoid leaving any marks or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave
marks or a rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive
felt pads, available at hardware stores and home improvement centers everywhere, and apply these
pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Thank you for purchasing the JENSEN JiSS-100 Docking System.
Before operating the unit, please read this manual thoroughly and retain it for future reference.
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
FUNCTION (iPod / AUX / FM / AM)
POWER ON/OFF
4
5
TUNING DOWN /
30-PIN Connector
Button
1
6
7
8
2
3
TUN. DN
TUN. UP
MEMORY/PLAY/PAUSE
PRESET EQ
9
(ROCK / POP / JAZZ / CLASSIC)
7.
8.
9.
TUNING UP /
Button
VOLUME UP Button
VOLUME DOWN Button
10. AC POWER SOCKET
11. Telescopic Rotating Antenna
12. PHONES Jack
11
13. AUX IN Jack
12
13
10
14. Battery Door
14
4
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCE
This JiSS-100 Docking System operates on AC120V~ 60Hz line power or on 4 “AA” (UM-3)
batteries (Not included). Do not attempt to operate the radio with any other power source. You
could cause damage to the unit and void your warranty.
Please be sure the power outlet you plug this unit into is working and receives constant
(unswitched) power.
A. AC Power Operation
Insert the AC Cord into the AC cord socket located on the back of JiSS-100. Plug the other end into a
standard 120V~ AC outlet as shown in the diagram below.
AC Outlet
AC Cord Inlet
B. Battery Operation
Note: For best performance and longer operating time, we recommend the use of alkaline-type
batteries.
1. Remove the BATTERY DOOR.
2. Install 4 pieces of “AA” (UM-3) batteries (not included), according to the polarity diagram,
inside the battery compartment.
3. Replace the BATTERY DOOR.
IMPORTANT: Be sure that the batteries are installed correctly.
Wrong polarity may damage the unit and void the warranty.
Battery Precautions
Follow these precautions when replacing the battery in this device.
1. Do not mix old and new batteries
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. Use only the size and type of battery specified.
4. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed battery may cause damage to the device.
5. If the device is not to be used for a long period of time, remove the battery to prevent damage or
injury from possible battery leakage.
6. Do not dispose of batteries in fire, batteries may explode or leak.
Battery Replacement
The output sound of this unit will become distorted when the batteries become weak. You need
to replace all the exhausted batteries at the same time as soon as possible to avoid battery
leakage.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATION
Button to turn on the unit.
1. Press the
2. Press the FUNCTION Button to operate the unit in AM or FM mode.
AM
780
FM
92 6
TO:
PRESS:
TUN UP/
TUN UP/ or TUN DN/
TUN UP/ or TUN DN/
VOLUME or VOLUME Buttons
EQ Button repeatedly until the desired EQ shown in the Display
Scan radio station automatically
or TUN DN/
Buttons and hold for 1 second
Buttons again
Buttons repeatedly
Stop auto-tuning
Scan radio station manually
Adjust the volume level (0~16)
Select the EQ
3. To turn JiSS-100 off, press the
Button again.
Note:
i. When listening to an FM station, fully extend the telescopic antenna and adjust the angle to
insure maximum reception.
ii. Automatic tuning operation may vary depending on the broadcast signal strength and also your
distance from the broadcast tower, so weaker stations may be skipped. Tune manually to find
the weaker stations. With stronger stations, the tuner may stop before it reaches the optimum
setting for that station. Adjust tuning manually for the best reception if necessary.
iii. If FM reception is weak, try repositioning the unit near an open window or rotating the antenna
until you get the best reception.
iv. For best AM reception, please undock your iPod when listening to AM stations.
v. The sound equalization can be adjusted for optimum sound reproduction depending on the style
of music you are playing. By pressing the EQ Button, you can switch between ROCK, POP,
JAZZ, CLASSIC, or FLAT equalization to suit your taste.
Flat
Rock
POP
JAZZ
CLASSIC
To Preset Channels
The JiSS-100 is equipped with 20 preset memories each for the AM and FM band.
1. Press the Button to turn on the unit.
2. Press the FUNCTION Button to operate the unit in AM or FM mode.
3. Tune to a desired station.
4. Press and hold the MEMORY Button until the Channel Indicator “P-01” appears and flashes in the
Display.
ROCK
P
-
0 1
5. While the Channel Indicator “P-01” is flashing press the TUN UP/ or TUN DN/
Buttons to
select the desired preset channel.
6. Press the MEMORY Button again to confirm when the desired preset channel appears in the
Display.
7. Tune to another station and repeat steps 4 to 6 to store the new station in another preset channel.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
To Receive Preset Stations
1. Press the Button to turn on the unit.
2. Press the FUNCTION Button to operate the unit in AM or FM mode.
3. To listen to your desired station, press the MEMORY Button once. Preset Channel “P-01” will
appear in the LCD.
4. Press the TUN UP/
or TUN DN/
Buttons repeatedly until your desired preset channel
appears in the LCD.
AUX OPERATION
You can play other music sources (iPod shuffle (1st and 2nd generation), MP3, CD or other digital audio
player) through the speakers of JiSS-100 by connecting its AUX IN Jack to your external player’s LINE
OUT jack or headphone jack.
1. Plug one end of the connection cord (Not included) into the AUX IN jack on the back of JiSS-100.
Plug the other end of the cord into your external audio player, such as an iPod shuffle, CD, MP3
Player etc.
2. Power on JiSS-100 and the external player.
3. Press the FUNCTION Button to select the AUX mode.
4. Start playing your iPod shuffle, MP3, CD or other digital audio player.
5. Slowly adjust both the volume on JiSS-100 and the external device.
6. Press the EQ Button repeatedly to choose the desired equalizer effect.
7. Turn off the attached player when finish listening.
8. Press the Button to turn JiSS-100 off and unplug the connection cord from the AUX IN jack.
iPod ADAPTORS
There are three iPod Adaptors included in the package for the iPod touch (2nd generation) and iPod
nano (3rd generation & and 4th generation). It is always recommended you use the adaptor that comes
with your iPod first. This will help maximize a custom fit for your iPod when docked.
DOCKING YOUR iPod
1. Select a suitable adaptor (included) or use the one comes with your iPod
and insert it into the docking bay. Your iPod can now be inserted onto the
iPod
docking connector by aligning the connector on the bottom of the iPod onto
the connector in the docking bay.
TUN. DN
TUN. UP
Note : Please be careful when seating your iPod onto the dock to avoid
damaging the 30-pin connector in the iPod or the docking system.
2. Press the Power Button to turn on the unit.
JAZZ
P
3. Press the FUNCTION Button to select iPod mode.
P
4. The iPod will start playing and charging automatically.
7
Download from Www.Somanuals.com. All Manuals Search An-d 0Dow1nload.
Note: The iPod will only charge when the JiSS-100 is using an AC power source.
5. Adjust the sound level by pressing the VOLUME Buttons on the JiSS-100.
/
Note : The volume level cannot be adjusted using the volume control on your iPod after being
docked.
6.
7.
8.
Press the
Press and hold the
or
Buttons to skip to the previous or next song.
or Buttons to fast-backward or fast-forward during playback.
Repeatedly press the EQ Button on JiSS-100 to choose the desired equalizer effect.
Note : Set the EQ of your iPod to OFF so it doesn’t interfere with the EQ on this unit.
9.
To remove the iPod from JiSS-100, press and hold the
Button for few seconds to switch off
the iPod and then gently remove it from the docking connector.
10. To turn JiSS-100 off, press the Power Button again.
USING HEADPHONES (NOT INCLUDED)
Inserting the plug of your headphones (not included) into the Headphone jack will enable you to listen in
private. When using headphones, the speakers will be disconnected automatically.
Note: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow
you to hear outside sounds. Please note that excessively high volume may still block outside
sounds.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.
Cleaning the Unit
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use
caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays
on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power requirement ………………....…… AC 120V ~ 60Hz 15 W
DC 6V, “AA” (UM-3) X 4
Frequency Range………...………......….. AM 530 - 1710 kHz
FM 87.5 - 108 MHz
Power output …………………….......……1.5W x 2
Speaker loading………………….....……. 8 Ohm x 2
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this devise or its compliance with safety and regulatory
standards.
TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this Docking System, please check the following or call
1-800-777-5331 for Customer Service.
Symptom
Possible Cause
Solution
AC cord is not plugged properly into a Plug the AC cord into a wall outlet and plug
wall outlet or the connector is not
plugged into the AC IN jack on the
back of the unit.
the connector into the AC IN jack on the
unit.
The unit does not
respond (no power)
Plug another device into the same out
outlet to confirm the outlet is working.
Make sure the dock insert is properly fit for
Wall outlet is not functioning.
your iPod.
Make sure the dock insert is properly fit for
your iPod
iPod cannot not be
docked properly.
Using wrong iPod Adaptor.
Remove your iPod from the dock and
check for obstruction on the connectors in
the dock and on your iPod. Then reseat it in
the dock.
Remove your iPod from the dock and
check for obstruction on the connectors in
the dock and on your iPod. Then reseat it
on the dock.
iPod is not installed properly.
Your iPod is locked up.
iPod does not respond
to the system
Please make sure that your iPod is working
properly before docking into the unit.
Please refer to your iPod manual for info on
resetting the iPod.
Remove your iPod from the dock and
check for obstruction on the connectors in
the dock and on your iPod. Then reseat it in
the dock.
iPod is not installed properly.
iPod does not charge up
iPod is locked up/ frozen.
iPod battery has problem.
Please make sure your iPod is working
properly before docking into the unit.
Please refer to your iPod manual for details
on resetting.
Slightly rotate the AM loop antenna position
for the best reception.
AM band is too noisy.
FM band is too noisy.
The reception at the set location is
poor
Move the AM loop antenna away from the
unit to avoid interference.
Interference from the iPod
The reception at the set location is
poor
Undock the iPod
Make sure the FM Antenna is fully
extended and tape it onto the wall if
required, the higher the better
Undock the iPod
Interference from the iPod
9
Download from Www.Somanuals.com. All Manuals Search And Download.
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or
factory workmanship for a period of 90 days from the date of original customer purchase and provided the product
is utilized within the U.S.A. This warranty is not assignable or transferable. Our obligation under this warranty is
the repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the
SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a
duplicated copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is
repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There are no other
express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions and
warnings covered within the owner’s manual or non-SPECTRA approved modifications
c. Claims are made within the warranty period
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with
electrical codes or SPECTRA owner’s manual specifications, or failure to provide reasonable care and
necessary maintenance as outlined in the owner’s manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in a
nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it prepaid by
insured parcel post or UPS to SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE
WARRANTY PERIOD shown above, please include a proof of purchase (dated cash register receipt) so that we
may establish your eligibility for warranty service and repair of the unit without cost. Also include a note with a
description explaining how the unit is defective. A customer service representative may need to contact you
regarding the status of your repair, so include your name, address, phone number and e-mail address to speed
the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $30.00 to cover the cost of
repair, handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at [email protected] for
updated information on the unit requiring service. In some cases the model you have may be discontinued and
SPECTRA reserves the right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link below on the website to enter your information.
Printed in China
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|