Jensen MP3 Docking Station JiMS 60 User Manual

®
DOCKING MUSIC SYSTEM FOR iPOD  
JiMS-60  
(iPod Not Included)  
PLEASE READ THIS OPERATING MANUALCOMPLETELY BEFORE OPERATING  
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH  
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE  
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO  
PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE  
TO RAIN OR MOISTURE.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions  
2. Keep these instructions  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
8. Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wider or the third  
prong is provided for your safety. If the provided plug does not fit into your  
outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11. Only use attachments / accessories specified by the  
manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury  
from tip-over.  
13. Unplug this apparatus during lightning storms or when  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
15. This appliance shall not be exposed to dripping or splashing water and that  
no object filled with liquids such as vases shall be placed on the apparatus.  
16. Do not overload wall outlet. Use only power source as indicated.  
17. Battery pack or battery installed shall not be exposed to excessive heat such  
as sunshine, fire or the like.  
18. Do not attempt to dismantle, open or repair this product yourself. If a  
fault occurs, seek advice from your local qualified service technician  
or contact the distributor via the telephone number at the back of this  
instruction manual.  
19. Caution marking and nameplate are located on bottom of product.  
Remark:  
this is CLASS II apparatus with double insulation, and  
no protective earth provided.  
CAUTION  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.  
FULLY INSERT.  
IMPORTANT NOTES  
Avoid installing the unit in locations described below:  
Places exposed to direct sunlight or close to heat radiating appliances such  
as electric heaters.  
Dusty places.  
Places subject to constant vibration.  
Humid or moist places.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPLIANCE WITH FCC REGULATIONS  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference  
that may cause undesired operation.  
NOTE : This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: Changes or modifications not expressly approved by  
the party responsible for compliance could void the user’s authority  
to operate the equipment.  
PROTECT YOUR FURNITURE  
This model is equipped with non-skid rubber 'feet' to prevent the product  
from moving when you operate the controls. These 'feet' are made from  
non-migrating rubber material specially formulated to avoid leaving any  
marks or stains on your furniture. However certain types of oil based  
furniture polishes, wood preservatives, or cleaning sprays may cause the  
rubber 'feet' to soften, and leave marks or a rubber residue on the  
furniture. To prevent any damage to your furniture we strongly  
recommend that you purchase small self-adhesive felt pads, available at  
hardware stores and home improvement centers everywhere, and apply  
these pads to the bottom of the rubber 'feet' before you place the product  
on fine wooden furniture.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER SOURCE  
This unit is designed to operate on normal household AC power rated at  
120V/60Hz. Operating this unit from any other power source may cause  
damage to the unit, and such damage is not covered by your warranty.  
It is also equipped with a battery back-up system for the clock that is powered  
by an optional 9V 006P battery (type 6F22 or equivalent – not included).  
BATTERY BACK–UP SYSTEM  
The Battery Back-up System ensures the clock and alarm settings will be retained  
during a power interruption or power outage (in order to preserve the battery life  
the Display will not light). All clock settings will be kept in memory, however, the  
clock time may require adjustment for exact accuracy once the power returns. If a  
battery is not installed, the Display will blink”12:00” when the power is restored.  
This will indicate that you have to reset the time and alarm settings.  
BATTERY INSTALLATION  
1. Open the battery compartment door on the  
bottom of the cabinet and connect a 9V DC  
battery to the Battery Clip located inside.  
Note: The battery clip only fits one way to ensure  
the correct polarity.  
2. Replace the Battery Compartment Door.  
IMPORTANT: Be sure that the battery is  
installed correctly. Wrong polarity may damage the unit.  
3. For optimum performance, an alkaline-type battery is recommended. If the  
unit is not to be used for an extended period of time, remove the battery.  
An old or leaking battery can cause damage to the unit and will void the  
warranty.  
4. Do not try to recharge batteries that are not intended to be recharged; they  
can overheat, rupture and leak. (Follow the battery manufacturer’s directions).  
5. Do not dispose of batteries in fire, batteries may leak or explode.  
DIMMER CONTROL  
Slide the DIMMER switch on rear panel to High/Low position to control the  
display brightness.  
POWER FAILURE INDICATOR  
If there is no battery installed in the unit or the battery installed is weak or dead,  
the time and alarm settings will be lost if the power is interrupted. When the AC  
power is restored the display will flash “12:00”. This indicates that the time  
displayed is incorrect and needs to be reset.  
IMPORTANT:  
After you reset the time, be sure to reset your alarm settings as well.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS AND INDICATORS  
1. AC POWER CORD  
12. DOCK FOR iPod  
2. DIMMER SWITCH  
13. iPod PLAY/PAUSE  
BUTTON  
3. WAKE UP SOURCE SELECTOR  
14. FUNCTION SELECTOR  
15. iPod SKIP FORWARD  
MINUTE BUTTON  
4. iPod SKIP BACKWARD  
HOUR BUTTON  
;
;
5. VOLUME CONTROL KNOB  
6. AUX IN JACK  
7. SLEEP BUTTON  
8. TIME SET BUTTON  
9. CLOCK DISPLAY  
10. SNOOZE BUTTON  
16. TUNING KNOB  
17. POWER INDICATOR  
18. ON/STANDBY BUTTON  
19. ALARM SET BUTTON  
20. CLOCK PM TIME INDICATOR  
21. ALARM INDICATOR  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. FM ANTENNA  
22. SLEEP INDICATOR  
CLOCK SETTINGS  
When you plug the radio to an AC outlet for the first time the clock display will  
begin flashing "12:00". The flashing will stop when you set the time.  
1. In standby mode, press and hold the TIME SET button and repeatedly press  
the HOUR button to set the correct Hour.  
2. Press and hold the TIME SET button and repeatedly press the MINUTE  
button to set the correct Minute.  
NOTE  
There is a PM indicator located in the top left-hand corner of the clock display.  
Be sure to observe the PM indicator when setting the time to make sure the time  
is set correctly for AM or PM. If the PM indicator is 'On', the time displayed is  
"PM". If the PM indicator is 'Off, the time displayed is "AM ".  
RADIO OPERATIONS  
1. Press the ON/STANDBY button to turn the unit on.  
2. Slide the FUNCTION selector to the desired radio band, AM or FM.  
3. Select your desired station with the TUNING control.  
4. Adjust the VOLUME control to the desired listening level.  
5. When you have finished listening, press the ON/STANDBY button to turn  
the radio off.  
TIPS FOR BEST RADIO RECEPTION  
AM - The AM antenna is built inside the radio. If AM reception is weak, slightly  
rotate or change the position of the unit until the internal antenna picks up  
the strongest signal.  
FM - If FM reception is weak, fully extend the wire antenna and vary the position  
and location of the antenna until you find the strongest signal.  
Note: To avoid any interference noise generate from speaker, please do  
not put any iPod models near the system while listening to AM  
radio.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
iPod OPERATION  
1.) Use the iPod adapter included with your iPod and insert it into the  
docking area. Your iPod can now be docked by placing the connector  
on the bottom of the iPod onto the connector in the docking bay.  
Note: Please be careful when docking the iPod onto the 30-pin connector  
in the docking bay. Improper installation or excessive force could  
damage the 30-pin connector on the iPod or in the docking system.  
2.) Press the ON/STANDBY button to turn on the unit.  
3.) Slide the FUNCTION button to select iPod mode. The iPod will start  
playing automatically and start charging immediately. You can also  
play the iPod by pressing the iPod PLAY/PAUSE button when the unit  
is in a different function mode.  
4.) Press the iPod PLAY/PAUSE button to pause or resume iPod  
playback.  
5.) Adjust the sound level by rotating the VOLUME control knob.  
Note: The volume level cannot be adjusted using the volume control on  
your iPod after it is docked.  
6.) The iPod charges at all modes and during playback except when in  
AM radio mode.  
iPod playback control:  
Press the iPod PLAY/PAUSE  
playback;  
button to pause or resume the iPod  
Press the SKIP  
Press and hold the SKIP  
or  
button to skip to the next or previous song;  
or button for fast-forwarding or fast-  
rewinding during playback.  
ALARM OPERATIONS  
SETTING THE WAKE UP TIME  
1. Press and hold the ALARM SET button and repeatedly press the HOUR  
button to set the correct wake up Hour.  
2. Press and hold the ALARM SET button and repeatedly press the MINUTE  
button to set the correct wake up Minute.  
NOTE  
There is a PM indicator located in the top left-hand corner of the clock display.  
Be sure to observe the PM indicator when setting the alarm to make sure the  
alarm time is set correctly for AM or PM. If the PM indicator is 'On', the alarm  
time will be "PM". If PM indicator is 'Off, then the alarm time will be "AM ".  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECKING THE WAKE UP TIME  
Whenever you want to check the wake up time, simply press and hold the  
ALARM SET button. The display will change from current time to wake up time.  
Release the ALARM SET button to return to current time.  
WAKE TO iPod  
1. Turn on the unit, slide the FUNCTION selector to “iPod/AUX” position, dock  
your iPod onto the unit to play, adjust the volume level that you wish to hear  
when the wake up time is reached, then slide the WAKE UP SOURCE  
selector to the “iPod/Radio” position. The ALARM indicator will light up.  
2. Reconfirm the wake up time setting by pressing the ALARM SET button and  
then turn off the unit.  
3. At the selected wake up time the iPod will turn 'On' and will play for about  
two hours and then shut off automatically.  
4. To stop the iPod, press the ALARM SET button. The iPod will stop but the  
alarm remains set and will turn the unit on again at the same time on the  
following day.  
5. If you do not want the alarm to turn the unit on the following day, set the  
WAKE UP SOURCE selector to the “ALARM OFF” position. The Alarm  
Indicator will go off.  
Note: If you select wake to iPod, please make sure your iPod is docked properly,  
otherwise, the iPod will not play when preset alarm time is reached.  
WAKE TO RADIO  
1. Turn on the unit, slide the FUNCTION selector to “AM” or “FM” position, tune  
to the radio station you preferred, and adjust the volume level that you wish  
to hear when the wake up time is reached, then slide the Wake Up Source  
Switch to the “iPod/RADIO” position. The ALARM indicator will light up.  
2. Reconfirm the wake up time setting by pressing the ALARM button and then  
turn off the unit.  
3. At the selected wake up time the radio will turn 'On' and will play for about  
two hours and then shut off automatically.  
4. To stop the radio, press the ALARM SET button. The radio will stop but the  
alarm remains set and will turn the unit on again at the same time on the  
following day.  
5. If you do not want the alarm to turn the unit on the following day, set the  
WAKE UP SOURCE selector to the “ALARM OFF” position. The ALARM  
indicator will go off.  
WAKE TO ALARM  
1. Set the WAKE UP SOURCE selector to the “ALARM” position. The ALARM  
indicator will light up to confirm that the alarm is set.  
2. At the selected wake up time the alarm will sound and will continue for about  
two hours and then shut off automatically.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. To stop the alarm, press the ALARM SET button. The alarm will stop but the  
alarm remains set and will turn on the unit again at the same time on the  
following day.  
4. If you do not want the alarm on the following day, set the WAKE UP  
SOURCE selector to the “ALARM OFF” position. The ALARM Indicator will  
go off.  
SNOOZE ALARM  
After the radio or alarm sounds, you may press the SNOOZE button for a few  
more minutes sleep. The alarm will stop for approximately 9 minutes and then  
turn on again. Snooze function can be repeated again and again during alarm  
sounding period.  
SLEEP TIMER OPERATIONS  
SLEEP TO MUSIC  
You can program the sleep timer to play the radio for up to 1 hour 59 minutes  
and then shut off automatically.  
1. Press the Power button to turn on the unit. Slide the FUNCTION selector to  
“AM”, “FM” or “iPod” position, adjust volume level that you want to listen.  
2. Press the SLEEP button. The display will briefly show "0: 59". Press the  
HOUR button while holding the SLEEP button the display shows "1: 59" and  
the iPod/Radio will begin to play. After 1 hour 59 minutes the radio will shut  
off automatically.  
3. To adjust the amount of time that the audio will play before shutting off, hold  
the SLEEP button. Then press the MINUTE button to adjust the desired  
sleep time. When the desired amount of sleep time appears in the display,  
release the buttons.  
4. To cancel the sleep timer before it counts down to "00" and shuts the radio  
off, press the SNOOZE button once.  
SLEEP AND WAKE TO MUSIC  
1. Slide the FUNCTION selector to AM, FM or iPod/AUX position, adjust  
volume level that you wish to hear when the alarm comes 'On', then slide  
the WAKE UP SOURCE selector to the “iPod/RADIO” position. The ALARM  
indicator will light up.  
2. Follow steps 2 to 3 in “SLEEP TO MUSIC” above to set your desired sleep  
time.  
3. The unit is now programmed to turn off automatically at the Sleep Time you  
selected and then to turn on again at the preset “Alarm Time”.  
4. To cancel the sleep timer before it counts down to "00" and shuts the radio  
off, press the SNOOZE button.  
IMPORTANT:  
Remember that the station and volume settings you choose for the SLEEP TO  
MUSIC operation are the same settings you will hear if you set the alarm for  
wake to “MUSIC” the following morning.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUXILIARY INPUT  
This unit provides an auxiliary audio signal input for connecting external  
audio devices such as an MP3 player or TV. Use an audio cable with 3.5  
mm stereo plug (not included) to connect the external device to the AUX  
IN Jack located on the back of the unit.  
1.) Connect the 3.5mm AUX IN stereo plug to the line out jack or  
Headphone jack of your external audio device  
2.) Press the ON/STANDBY button to turn on the unit.  
3.) To select auxiliary audio input, set the FUNCTION selector to iPod /  
AUX position.  
4.) Turn on the auxiliary device.  
5.) The volume and equalizer can now be controlled through the main  
unit. Operate all other functions on the auxiliary device as usual.  
NOTE:  
If your connected to the Line Out Jack of your external device, then  
you only need to adjust the volume control of this unit. If you  
connected the Headphone Jack of your external device then you  
may need to adjust both the volume control of your external device  
and the volume control of this unit to find the most desirable volume  
setting.  
Press the ON/STANDBY button turning off the unit when you finish  
listening. Don't forget to switch off the power of your external device  
as well.  
RESETTING  
If the unit does not respond or has erratic operation, you may have  
experienced a severe electric shock (ESD) or a power surge that  
triggered the internal computer to shut down automatically. If this occurs,  
follow below steps to reset:  
1.) Disconnect the main power.  
2.) Remove back-up battery and waiting for 30 seconds.  
3.) Reinstall the back up batteries and then connect the main power  
again.  
NOTE: Although disconnect the power will unlock the internal computer  
after a power surge, it will also erase all of the settings. After  
turning “ON” the unit, you will need to reset the settings again.  
CARE AND MAINTENANCE  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Do not subject the unit to excessive force, shock, dust or extreme  
temperature.  
2. Do not tamper the internal components of the unit.  
3. Clean your unit with a dry cloth. Solvent or detergent should never be  
used.  
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty  
places.  
5. Keep your unit away from heating appliances and sources of electrical  
noise such as fluorescent lamps or motors.  
CLEANING THE UNIT  
To prevent fire or shock hazard, disconnect your unit from the AC power  
source when cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as  
other furniture, Use caution when cleaning and wiping the plastic parts.  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use  
any wax or polish sprays on the cabinet.  
If the front panel becomes dirty or smudged with fingerprints it may be  
cleaned with a soft cloth slightly dampened with a mild soap and water  
solution. Never use abrasive cloths or polishes as these will damage the  
finish of your unit.  
CAUTION: Never allow any water or other liquids to get inside the unit while  
cleaning.  
NOTE  
If there is no battery installed in the back-up battery compartment, the Time and  
Alarm settings will be lost when the AC power cord is disconnected for cleaning.  
Reset the clock and wake up time after reconnecting the AC power cord.  
TROUBLESHOOTING GUIDE  
Symptom  
Possible Problem  
The unit is disconnected  
from the AC outlet  
Wall outlet is not  
Solution  
The unit does  
not respond (no  
power).  
Reconnect to the AC outlet.  
Plug another device into the same  
outlet to confirm the outlet is working.  
Remove your iPod from the dock and  
check for obstruction on the  
connectors in the dock and on your  
iPod. Then reseat it on the dock.  
Please make sure that your iPod is working  
properly before docking into the unit.  
Please refer to your iPod manual for info  
on resetting the iPod.  
functioning.  
iPod is not installed  
properly.  
iPod does not  
respond to the  
speaker  
system.  
Your iPod is locked up.  
iPod does not  
charge up.  
FUNCTION selector set  
to AM radio mode.  
Select other modes for iPod charging.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove your iPod from the dock and  
check for obstruction on the  
connectors in the dock and on your  
iPod. Then reseat it in the dock.  
Please make sure your iPod is working  
properly before docking into the unit.  
iPod is not installed  
properly.  
iPod is locked up/ frozen.  
iPod battery has problem. Please refer to your iPod manual for details  
on resetting.  
The reception at the set  
location is poor.  
Slightly rotate the unit for the best  
reception.  
AM band is too  
noisy.  
iPod is docked or near  
the unit  
Remove the iPod from the dock and  
move it away from the unit.  
Volume level is set too  
high.  
Decrease the volume.  
If the iPod original sound source is of  
poor quality, distortion and noise are  
easily noticed with high-power  
speakers. Try a different audio source  
such as a music CD.  
Sound is  
distorted.  
Sound source is  
distorted.  
If you are using an external sound source  
like older generation of iPod, try reducing  
the output volume on the device itself. Also  
try turning bass boost OFF or change the  
EQ setting.  
Unit gets warm  
after extended  
play at high  
volume.  
Turn the unit off for a period of time or  
lower volume.  
This is normal.  
SPECIFICATIONS  
Power Requirement  
Main Unit  
AC 120V~ 60Hz 10W  
Back-up Battery for Clock  
1 x DC 9V 006P(6F22) Battery  
Frequency Range  
Radio  
AM 530 - 1710 kHz  
FM 88 - 108 MHz  
"Made for iPod" means that an electronic accessory has been designed to  
connect specifically to iPod and has been certified by the developer to meet  
Apple performance standards.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Apple is not responsible for the operation of this devise or its compliance with  
safety and regulatory standards.  
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.  
90 DAY LIMITED WARRANTY AND SERVICE  
VALID IN THE U.S.A ONLY  
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from  
defective materials or factory workmanship for a period of 90 days from the date of  
original customer purchase and provided the product is utilized within the U.S.A. This  
warranty is not assignable or transferable. Our obligation under this warranty is the  
repair or replacement of the defective unit or any part thereof, except batteries, when it  
is returned to the SPECTRA Service Department, accompanied by proof of the date of  
original consumer purchase, such as a duplicate copy of a sales receipt.  
You must pay all shipping charges required to ship the product to SPECTRA for  
warranty service. If the product is repaired or replaced under warranty, the return  
charges will be at SPECTRA’s expense. There are no other express warranties other  
than those stated herein.  
This warranty is valid only in accordance with the conditions set forth below:  
1. The warranty applies to the SPECTRA product only while:  
a. It remains in the possession of the original purchaser and proof of purchase is  
demonstrated.  
b. It has not been subjected to accident, misuse, abuse, improper service, usage  
outside the descriptions and warnings covered within the user manual or non-  
SPECTRA approved modifications.  
c. Claims are made within the warranty period.  
2. This warranty does not cover damage or equipment failure caused by electrical  
wiring not in compliance with electrical codes or SPECTRA user manual  
specifications, or failure to provide reasonable care and necessary maintenance as  
outlined in the user manual.  
3. Warranty of all SPECTRA products applies to residential use only and is void when  
products are used in a nonresidential environment or installed outside the United  
States.  
This warranty gives you specific legal rights, and you may also have other rights which  
vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and  
pack the unit carefully and send it freight prepaid to SPECTRA at the address shown  
below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above,  
please include a proof of purchase (dated cash register receipt) so that we may  
establish your eligibility for warranty service and repair of the unit without cost. Also  
include a note with a description explaining how the unit is defective. A customer service  
representative may need to contact you regarding the status of your repair, so please  
include your name, address, phone number and email address to expedite the process.  
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for  
$15.00 to cover the cost of repair, handling and return postage. All out of warranty  
returns must be sent prepaid.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at  
[email protected] for updated information on the unit requiring service. In some  
cases the model you have may be discontinued, and SPECTRA reserves the right to  
offer alternative options for repair or replacement.  
SPECTRA MERCHANDISING INTERNATIONAL, INC.  
4230 North Normandy Avenue,  
Chicago, IL60634, USA.  
1-800-777-5331  
To register your product, visit the link on the website below to enter your information.  
Printed in China  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Speaker HPS 15 User Manual
Jabra Headphones GN9350e User Manual
JBL Speaker GTO 804 8 User Manual
Jenn Air Cooktop GAS ON GLASS COOKTOP User Manual
Kambrook Toaster KT50 User Manual
Kambrook Vacuum Cleaner KBV50T User Manual
Kensington Marine Lighting 62070 User Manual
Kenwood Car Stereo System DPX 4020 User Manual
KitchenAid Electric Shaver KEDC205Y User Manual
Kompernass Microwave Oven KH1167 User Manual