Jensen Car Video System UV8 User Manual

UV8

Instruction Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

Thank you for choosing a Phase Linear product. We hope you will find the instructions in this

owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll

learn how to use all the features of your new Phase Linear UV8 Mobile Multimedia Receiver for

maximum enjoyment.

Preparation............................................................................................................................ 1

Installation............................................................................................................................. 2

Controls and Indicators ......................................................................................................... 4

Remote Control..................................................................................................................... 6

Using the TFT Monitor .......................................................................................................... 8

Operating Instructions......................................................................................................... 10

Setup Menu......................................................................................................................... 11

Tuner Operation.................................................................................................................. 13

DVD/VCD Video Operation................................................................................................. 15

DVD/CD Audio Operation ................................................................................................... 18

MP3/WMA Operation .......................................................................................................... 19

Troubleshooting .................................................................................................................. 21

Specifications...................................................................................................................... 23

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

PREPARATION

Congratulations on your purchase of the Phase Linear UV8

Mobile Multimedia Receiver.

•

Two Composite Video Outputs for Additional Screens

Two Audio / Video Auxiliary Inputs for Game Console,

Camcorder, Navigation, etc.

Three-Band Tone control (Bass, Mid and Treble) w/

Eight Preset EQ Curves

Front, Rear and Subwoofer Line Output

Subwoofer Phase Control - 0 ~ 1800

Programmable Volume Control

Rear Camera Input (Normal and Mirror Image View)

Touch Screen Calibration Mode

WARNING! To prevent damage to the mechanism inside

this unit, avoid impact to the TFT monitor.

It’s a good idea to read all of the instructions before beginning

the installation. We recommend having your Phase Linear

UV8 installed by a reputable installation shop.

•

WARNING! Using an improper fuse may cause damage

to the unit and result in a fire.

•

Features

DVD

•

Aspect Ratio - Full and Normal

Fast Forward - 2X, 4X, 8X and 32X

Slow Motion - 1/2, 1/4, 1/6 and 1/7

Play, Pause, Stop, Next Chapter and Previous Chapter

WARNING! The monitor employs an automatic motorized

mechanism. To prevent damage to the core mechanism,

please do not push, pull or swivel the monitor manually.

2VRMS Line Output - All Channels

Rotary Encoder Audio Control

5-Way Joystick

CD / MP3 / WMA

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and

remove the negative (-) battery cable prior to installation.

•

CD-Text Compatible

ID3 Tag Compatible

Directory Search (MP3 / WMA Only)

Direct Track Access via Remote Control

Burn up to 1500 MP3 and WMA Files onto a DVD+R /

Tools and Supplies

You will need these tools and supplies to install your UV8:

•

Torx type, flat-head and Philips screwdrivers

Wire cutters and strippers

Tools to remove existing radio (screwdriver, socket

wrench set or other tools)

Electrical tape

Crimping tool

Volt meter/test light

Crimp connections

18 gauge wire for power connections

16 – 18 gauge speaker wire

NOTE: If the UV8 is to be installed in a car equipped with

an on-board drive or navigation computer, do not

disconnect the battery cable. If the cable is

disconnected, the computer memory may be lost. Under

these conditions, use extra caution during installation to

avoid causing a short circuit.

•

Audible Forward / Reverse Track Search (CD-DA Only)

Random, Repeat and Intro

Play, Pause, Stop, Next Track and Previous Track

•

AM-FM

•

USA / Europe / Latin America / Asia Frequency Spacing

30 Station Presets (18 FM / 12 AM)

Auto Stereo / Mono

Local / Distance

Auto Store / Preview Scan

WARNING! Only connect the unit to a12-volt power

supply with proper grounding.

A / V Media Adapter Cable

•

Allows Portable Media Devices to be Connected via A /

V Input

WARNING! Never install this unit where operation and

viewing could interfere with safe driving conditions.

•

4-Conductor 3.mm Connector for iPod / Zune Video,

etc.

Chassis

WARNING! To reduce the risk of a traffic accident (except

when using for rear view video camera) never use the

video display function while driving the vehicle. This is a

violation of federal law.

•

1.0 DIN (Import / ISO-DIN Mountable)

Motorized Flip-Out / Flip-Up LCD Screen

8 Character / Segment Type Secondary LCD Display

7" TFT Active Matrix LCD w/ Anti-Glare Coating

336, 960 Sub Pixels (1440W X 234H)

Pixel Pitch - 0.321W X 0.370H

WARNING! Never disassemble or adjust the unit.

Screen Tilt / Angle Adjustment

Beep Tone Confirmation (On-OFF Option)

Heat Management System - Forced Air-Cooling To

Keep The Chip-Sets Operating at Nominal

Temperatures

WARNING! To prevent injury from shock or fire, never

expose this unit to moisture or water.

General

44-Key Infrared Remote Control

WARNING! Never use irregular discs.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

INSTALLATION

Pre-installation

1. Press the metal levers on both sides to remove the half-

FINAL INSTALLATION

CAUTION! Be careful not to damage the car wiring.

sleeve from the radio.

3. Place the radio in front of the dashboard opening so the

wiring can be brought through the mounting sleeve.

PREPARE RADIO

Wiring

Complete wiring as illustrated in the wiring diagram on page

3. Once the wiring is complete, reconnect the battery

negative terminal. If there is no ACC available, connect the

ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct

type and amperage to avoid damaging the radio. The

UV8 uses one 10 amp mini-ATM fuse, located in the black

filter box in-line with the main wire harness.

Final Installation

Final ISO-DIN Installation

1. Remove trim ring.

After completing the wiring connections, turn the unit on to

confirm operation (ignition switch must be on). If unit does not

operate, recheck all wiring until problem is corrected. Once

proper operation is achieved, turn off the ignition switch and

proceed with final mounting of the chassis.

2. Install the half-sleeve.

a. Install adapter if necessary (optional).

2. Mount factory brackets on new radio using existing

screws from old radio.

b. Install half-sleeve into adapter or dashboard (use

only the supplied screws). Do not force the sleeve

into the opening or cause it to bend or bow.

c. Locate the series of bend-tabs along the top,

bottom and sides of the mounting sleeve. With the

sleeve fully inserted into the dashboard opening,

bend as many of the tabs outward as necessary so

that the sleeve is firmly secured to the dashboard.

d. Install support strap to make the unit more stable.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the half-sleeve, making

sure it is right-side-up, until it is fully seated and the

spring clips lock it into place.

FINAL ISO-DIN INSTALLATION

NOTE: For proper operation of the CD/DVD player, the

chassis must be mounted within 20° of horizontal. Make

sure the unit is mounted within this limitation.

INSTALL HALF SLEEVE

4. Attach one end of the perforated support strap

(supplied) to the screw stud on the rear of the chassis

using the hex nut provided. Fasten the other end of the

perforated strap to a secure part of the dashboard either

above or below the radio using the screw and hex nut

provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with

the strap to prevent damage to the dashboard from the

weight of the radio or improper operation due to

vibration.

5. Replace any items you removed from the dashboard.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

WIRING DIAGRAM

BLUE

RED

SUB.W

FRONT R

FRONT L

REAR R

REAR L

External Power Amplifier

A/V Media

Adapter Cable

WHITE

RED

YELLOW

WHITE

RED

WHITE

YELLOW

External AV System

WHITE

RED

Antenna Jack

YELLOW

Rear Video 1

Rear Video 2

VIDEO OUT 1

VIDEO OUT 2

Antenna

Harness Cord

YELLOW

Auto antenna control (connect to antenna

control lead & power supply of antenna

amplifier)

BLUE

ANT.CONT

External power amplifier control

Rear View

Video Camera

BLUE/WHITE

P.CONT

CAMERA

PRK SW

Car Phone

Mute (leave open if not connected)

BROWN

Car

PARKING BRAKE

MUTE

PINK

WHITE +

GREEN/WHITE

FRONT L+

WHITE/BLACK -

FRONT L

REVERSE +

FRONT L-

Gearbox

Switch

GREY +

Ground

FRONT R+

FRONT R-

GREY/BLACK -

Ignition Switch

FRONT R

REAR R

REAR L

ACC

RED

ACC

PURPLE +

REAR R+

REAR R-

PURPLE/BLACK -

BATTERY

FUSE (15A)

YELLOW

BATT

Battery

GREEN +

REAR L+

REAR L-

GREEN/BLACK -

BLACK

GND

BATTERY

Ground

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

CONTROLS AND INDICATORS

Button Operation

1. OPEN

Press to activate the automatic mechanical system and move

the TFT monitor into viewing position. Press again to close

the TFT.

2. WIDE/DISP

Press to adjust the display aspect of the picture to one of two

settings: Full or Normal.

TILT

PIC

WIDE CLOSE

With the monitor closed, press the DISP button to cycle

through information available on the LCD screen.

3. PIC/AS/PS

Press to adjust the Brightness and Contrast. Press the VOL

button (5) to move between Brightness to Contrast. Turn the

rotary encoder (5) to adjust the setting for the selected option.

With the monitor closed, press AS/PS to automatically store

strong radio stations in the six preset channels in the current

band.

4. TILT/BAND

Press to activate the tilt function. Use the joystick to make

adjustments while the yellow icon is flashing. Press once to

adjust the downward tilt angle of the screen one step at a

time or press and hold to adjust the angle in a continuous

motion.

With the monitor closed, press the BAND button to change

the AM or FM band.

5. VOL (LO/DX)

Rotate to adjust the volume. Press and release to enter and/

or confirm audio settings. Press and hold to activate the Local

(LOC) setting.

6. SRC

Press to turn unit on. Press and hold to turn the unit off.

When on, press once to select playing mode.

7. LCD Display

8. MUTE

Press to silence the receiver. Press again to resume previous

volume level.

NOTE: The UV8 features Softmute, which will allow the

volume to increase or decrease gradually when the

MUTE function is activated or deactivated.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

CONTROLS AND INDICATORS

9. IR Remote Control Receiver

10. (

)

DVD Mode: Press once to play back the previous chapter/

track.

TUNER Mode: Press once to auto-search for the previous

available radio station.

MENU Mode: Press once to move the cursor to the left.

11. (

)

DVD Mode: Press once for slow forward/slow reverse.

TUNER Mode: Press to go down one frequency step.

MENU Mode: Press once to move the cursor down.

12. RESET

TILT

PIC

WIDE CLOSE

Press to reset system settings to factory default (except the

password and parental lock setting).

13. Pause/Play/Enter

Press to pause or resume playback or to confirm current

selection.

14. (

)

DVD Mode: Press once to enter the next chapter or track.

TUNER Mode: Press once to auto-search the next available

radio station.

MENU Mode: Press once to move the cursor to the right.

15. (

)

DVD Mode: Press once for fast forward/fast reverse.

TUNER Mode: Press to go up one frequency step.

MENU Mode: Press once to move the cursor up.

16. (

)

Press once for disc insertion/ejection.

Press and hold to reset core mechanism position.

17. TFT Display

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

REMOTE CONTROL

Table 1: Remote Control Functions

Button

Function

VCD

Name

Ref#

DVD

TUNER

CD/MP3

Enters the main menu of

the disc

Turns on/off PBC when

playing VCD

TITLE

MUTE

Enters the title menu of the Plays first ten seconds of

disc each chapter/title

TILT

Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output

DISP

Turns the power on/off

POWER/

AUDIO

SCAN

Changes the audio lan-

guage for disc playback

REPT

A-B

REPT

WIDE

REPT A-B

REPT

Setup to repeat playback

from time frame A to time

frame B

Setup to repeat playback

from time frame A to time

frame B

Repeats playback of cur-

rent chapter

Repeats playback of cur-

rent chapter

Repeats playback of cur-

rent track

SRC

Selects playing mode

SLOW

SUBTITLE

Language selection for

subtitle

SETUP

CLEAR

DISP

Displays playing informa-

tion

Displays playing informa-

tion

Displays playing informa-

tion

Display playing information

ANGLE

Plays back disc in differ-

ent angle for a scene

Plays back Picture CD with

different angle of picture

displayed

Fast forwards the disc con- Fast forwards the disc con-

Fast forwards the disc con-

tent

VOL -

VOL +

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

Selects the previous chap- Selects the previous chap- Searches an available

ter for playback

Selects the previous track

ter for playback

radio station by decreasing for playback

tuning frequency

Pauses playback/starts

playback

Pauses playback/starts

playback

Pauses playback/starts

playback

Selects the next chapter

for playback

Selects the next chapter

for playback

Searches an available

radio station by increasing

tuning frequency

Selects the next track for

playback

NOTE: Your remote control may differ slightly from the

one pictured here. The above diagram is for illustrative

purposes only.

BAND

GOTO

Stops playback

Selects FM/AM band

Stops playback

Goes to specific time

frame and playback

Goes to specific time

frame and playback

Slow playback/slow rewind Slow playback/slow rewind

playback

ZOOM

PIC

Zooms in/out on an image

Displays set-up parame-

ters

Displays set-up parame-

ters

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Table 1: Remote Control Functions

Button

Name

Function

VCD

Ref#

DVD

TUNER

CD/MP3

EJECT

Ejects disc

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle

TILT

DISP

Selects display mode:

FULL or NORMAL

Selects display mode:

FULL or NORMAL

SCAN

1, 2, 3, 4, 5, 27

6, 7, 8, 9, 0

(Numeric

Directly accesses chapter

1-6 selects preset for cur-

rent band

Directly accesses track

REPT

A-B

Keypad)

REPT

WIDE

CLEAR

Delete entry or move back- Delete entry or move back- Delete entry or move back- Delete entry or move back-

wards to correct error in

Direct Access mode

wards to correct error in

Direct Access mode

wards to correct error in

Direct Access mode

wards to correct error in

Direct Access mode

SETUP

SCAN

Displays Setup menu

Plays the first ten seconds

of each track

SLOW

SETUP

CLEAR

OPEN/

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

NOTE: Your remote control may differ slightly from the

one pictured here. The above diagram is for illustrative

purposes only.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

USING THE TFT MONITOR

Open/Close TFT Monitor

Open TFT Monitor

Aspect Ratio

Press the DISP button (10) on the remote control or DISP/

WIDE button (2) on the monitor to adjust the aspect ratio as

follows:

Parking Brake

Parking Brake Inhibit

Press the OPEN button (1) on the front panel or press the

When the pink "Parking" wire is connected to the vehicle

brake switch, the front TFT monitor will display video

only when the parking brake sequence is engaged.

Before starting the parking brake sequence, the radio

must be on with the video media disc inserted and

playing.

(

) button (31) on the remote control to activate the

mechanism that moves the display panel into the viewing

position.

FULL

Close TFT Monitor

The entire screen is extended

horizontally to the aspect ratio of 16 to

9. The extension ratio is the same at

any point.

Press the OPEN button (1) on the front panel or press the

Parking Brake Sequence

(

) button (31) on the remote control to load the display

There are two situations that can start the Parking Brake

Sequence (this is the preferred method). The timing

window is between 3 ~ 5 seconds.

panel back into the compartment.

NORMAL

TFT Monitor Auto Open

If “TFT Auto Open” is “on” when the unit is turned on, the

monitor automatically moves to the viewing position.

The conventional display image has a

4 to 3 ratio of horizontal to vertical,

leaving a blank area on the right and

left sides of the display.

•

Parking brake is engaged (on) when the vehicle is

started or the accessory/ignition is turned on. To

activate video, the following sequence of events

must be completed:

If “TFT Auto Open” is ”off” when the unit is turned on, press

the OPEN button (1) or (

) button (31) on the remote

a. Release parking brake for 3 ~ 5 seconds.

b. Reapply parking brake.

c. Video should be displayed on the TFT monitor

within 1 ~ 2 seconds.

control to move the monitor into the viewing position.

Image Setting

Table 2 shows the video output mode for each playing

source.

If “TFT Auto Open” is set to ”Manual”, the TFT will not close

when the key is turned off.

•

Parking break is disengaged (off) when the vehicle

is started or the accessory/ignition is turned on. To

activate video, the following sequence of events

must be completed:

Monitor Tilt Angle Adjustment

Table 2: Video Output Modes

A known characteristic of LCD panels is the quality of the

display in relationship to the viewing angle. The monitor

angle can be adjusted for optimum viewing using one of the

following methods:

Playing Source

Video Output Modes

a. Set parking brake for 3 ~ 5 seconds.

b. Release parking brake for 3 ~ 5 seconds.

c. Reapply parking brake.

d. Video should be displayed on the TFT monitor

within 1 ~ 2 seconds.

AM/FM TUNER

RGB Mode

CVBS Mode

Step by Step Angle Adjustment

DVD

•

Press the ( ) or ( ) button on the remote control to

adjust the tilt angle of the screen one step at a time.

Press the TILT button (4) on the control panel. While the

yellow angle icon is displayed near the top right corner

of the screen, use the /\ or V buttons (18, 19) on the

joystick to adjust the tilt angle of the screen one step at

a time.

AUX IN

•

*CVBS – Composite Video Baseband Signal

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following

protective measurements can be executed to prevent

damage to the mechanism or monitor:

Parameter Adjustment Procedure

1. Enter Picture Quality Setting Mode:

Press the PIC button (22) on the remote control or the

PIC/AS/PS button (3) on the monitor.

Continuous Angle Adjustment

2. Select Item to Set:

Table 3: Monitor Protective Measures

•

Press and hold the ( ) or ( ) button on the remote

control to adjust the tilt angle in a continuous motion.

Press the TILT button (4) on the control panel. While the

yellow angle icon is displayed near the top right corner

of the screen, press and hold the /\ or V buttons (18, 19)

on the joystick to adjust the tilt angle in a continuous

motion.

Press the AUDIO button (5) on the control panel to

select “BRIGHT” or “CONTRAST”.

3. Set Parameters:

Press the VOL +/– buttons (13, 14) on the remote or

turn the rotary encoder (5) on the control panel.

4. Exit Picture Quality Setting Mode:

Press the PIC button (22) on the remote control or the

PIC/AS/PS button (3) on the monitor

Self

Protection

OPEN Button

Pressed

Power

Reconnected

Obstruction

•

Monitor

Monitor is

Monitor fully Monitor is

extended

horizontally

loading out automati-

horizontally cally loaded

into unit

automati-

cally loaded

into unit

Monitor

Unit stops at Monitor fully Monitor is

loading in

obstruction

extended

horizontally

automati-

cally loaded

into unit

horizontally point

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Table 3: Monitor Protective Measures

Self

Protection

OPEN Button

Pressed

Power

Reconnected

Obstruction

Monitor

Unit stops at Monitor

Monitor swiv-

loading out obstruction

swivels back els back to

vertically

point

to the unit

the unit

Monitor

loading in

vertically

Unit stops at Monitor

Monitor swiv-

obstruction

point

swivels back els back to

to the unit

the unit

After the protective procedure is executed, normal operation

is resumed by pressing the OPEN button (1) or disconnecting

and reconnecting the power.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

OPERATING INSTRUCTIONS

External Devices

Table 4: Audio Adjustments

Power On / Off

External peripheral devices, including a game console,

camcorder, navigation unit, iPod, Zune, etc. can be

connected to this unit via RCA output using the A/V Media

Adapter Cable (included). Select “AUX1” or “AUX2” mode to

access auxiliary devices. You cannot directly control external

devices connected to AUX IN inputs.

Press the /SRC button (6) on the unit (or the button (4)

on the remote control) to turn the unit on. The buttons on the

front of the unit light up and the current mode status appears

in the LCD (7). You can also turn on the unit by pressing the

OPEN button (1) and opening the TFT screen.

Audio Function

Adjustable Range

User

Acoustic

Urban

Rave

Press and hold the button to power off the unit.The monitor

is drawn back into the main compartment.

Volume Adjustment

Latin

To increase or decrease the volume level, turn the rotary

encoder (5) on the front panel or press the VOL-/+ buttons

(13, 14) on remote control. When the volume level reaches

“0” or “40”, a beep sounds, indicating that the adjustment limit

has been reached. The volume ranges from “0” to “40”. The

LCD or TFT screen displays the volume level for 3 seconds.

Dance

Hip Hop

Rock

Audible Beep Confirmation

An audible beep tone confirms each function selection. The

Beep tone can be disabled through the Setup menu.

BASS

MID

-14 to +14

-14 to 0

Grid

Mute

Press the MUTE button (8) on the front panel or the MUTE

button (3) on the remote to mute the volume from the unit.

Press the MUTE button again to restore the volume. “MUTE”

is displayed on the LCD. Adjusting the volume or using any of

the audio setup features cancels the mute function.

Programmable Turn-On Volume

TREBLE

SUB

This feature allows the user to select a turn-on volume setting

regardless of the volume setting prior to turning the unit off.

To program a specific turn-on volume level, turn the VOL

control (2) to adjust the volume to the desired turn-on volume.

Push and hold the VOL button while the yellow speaker icon

and level indication is displayed on the screen. The unit will

beep to confirm your turn-on volume setting.

FAD

BAL

Grid

Playing Source Selection

Press the SRC button (6) on the front panel or the SRC

button (8) on the remote to change between available playing

sources in the following order: AM/FM, DISC, AUX1, AUX2,

and CAMERA. The playing mode is displayed on the TFT

and LCD screens.

NOTE: The EQ mode will automatically change to

“USER” when individual audio functions are adjusted.

Audio Control Menu

The Audio menu will automatically exit after a few seconds of

inactivity. To exit quickly, touch the top left corner of the

screen or press and hold the VOL button (5).

The Audio Control feature allows you to easily adjust your

audio system to meet the acoustical characteristics of your

vehicle, which vary depending on the type of vehicle and its

measurements. Proper setting of the Fader and Balance

boosts the effects of the cabin equalizer.

Source Menu

You can also use the touch screen to change the source

through the SOURCE MENU. To access the SOURCE

MENU, touch the top left corner of the screen.

System Reset

To correct a system halt or other

illegal operation, use the tip of a pen

to press the reset button (12) located

[RESET] Button

Press the VOL button (5) on the front panel once to display

the audio menu. To adjust an audio feature:

on the front bottom-right corner of the unit. After a system

reset, the unit restores all factory default settings.

1. Turn the rotary encoder (5) on the front panel, press the

(>>|)/(|<<) buttons (17, 15) on the remote control, or use

the joystick to highlight the audio feature to be adjusted.

2. Press the joystick button (13) to select the highlighted

option.

SOURCE MENU

RADIO

NOTE: If the unit is reset while a DVD is playing, the DVD

resumes play once the reset is complete.

DISC

RADIO

CAMERA

3. Rotate the VOL button (5), press the |<<, >>|, >>, or <<

buttons (12, 15, 17, 20) on the remote control, or use

the joystick to adjust the selected feature to the desired

setting.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a

telephone call is received by the car phone or when verbal

navigation is performed.

AUX 1

AUX 2

SKIN

Skin Selection

Touch the SKIN button, located in the bottom right corner of

the SOURCE MENU (see “Source Menu” on page 10), to

choose an alternate background image for the touch screen.

Touch the DISC, RADIO, CAMERA, AUX 1 or AUX 2 button

to select the corresponding source.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

SETUP MENU

To access system settings, press the SETUP button (29) on

3. Select a new value by using the touchscreen or pressing

the >> or << buttons (12, 20) on the remote control or

the /\ or V buttons (18, 19) on the joystick.

4. Use the touchscreen or press the >/|| button (16) on the

remote control or press the joystick button (13) to

confirm setup.

Setting

Options

Function

the remote control or touch the

button on the screen to

•

AM Frequency Spacing - 9kHz

AM Frequency Band -

531kHz~1602kHz

FM Frequency Spacing - 200kHz

FM Frequency Band -

88.1MHz~107.9MHz

Korea

enter the “SETUP” menu. The “GENERAL” sub-menu

appears highlighted in blue.

•

General Sub-menu Features

Beep

Off

When turned on, an audible

beep tone confirms each func-

tion selection.

SETUP MENU

Setting

Options

Function

Clock Mode 12Hr

Clock displays 12 hour time

using AM and PM.

No beep sounds.

Audio

BACK

General Language

Rating

Clock Mode

12Hr

Language Sub-menu Features

24Hr

Clock displays 24 hour time up

to 23:59.

If a DVD supports more than 1 Subtitle or Audio language, all

the languages are available for selection during playback. If

the selected language is not supported by the DVD, then the

default language is used.

Hardware

Clock

Tuner Region

Beep

04 : 31 AM

USA

Clock

(HH:MM)

Clock appears in the top right

corner of the screen and on the

LCD screen during certain

operations. NOTE: The AM/PM

indication will change as you

continue to adjust the hour past

12.

P.VOL

TS Cal

Setting

Options

Function

OSD

English

On Screen Display appears in

English.

•

AM Frequency Spacing - 10kHz

AM Frequency Band -

Accessing Menu Items

Tuner

Region

USA

Touch the sub-menu name, press the <<, >>, |<<, or >>|

direction buttons (20, 12, 15, 17) on the remote control, or

use the joystick to select a sub-menu (Language, Audio,

RDS, etc.).

530kHz~1720kHz

DVD Audio English

DVD Audio is heard in English

when the option is available.

•

FM Frequency Spacing - 200kHz

FM Frequency Band -

87.5MHz~107.9MHz

DVD Subti- English

tle

DVD subtitles automatically

appear in English when avail-

able.

•

AM Frequency Spacing - 10kHz

AM Frequency Band -

S.Amer1

Arabia

China

530kHz~1720kHz

Auto

Off

DVD subtitles appear accord-

ing to the default subtitle lan-

guage specified on the disc.

•

FM Frequency Spacing - 100kHz

FM Frequency Band -

87.5MHz~108.0MHz

DIRECTION BUTTONS

•

AM Frequency Spacing - 9kHz

AM Frequency Band -

531kHz~1620kHz

FM Frequency Spacing - 100kHz

FM Frequency Band -

87.5MHz~108.0MHz

DVD subtitles do not appear

automatically.

•

Disc Menu

English

DVD menu (if applicable) is

displayed in English.

•

AM Frequency Spacing - 9kHz

AM Frequency Band -

Audio Sub-menu Features

522kHz~1620kHz

•

FM Frequency Spacing - 100kHz

FM Frequency Band -

Setting

Options

Function

The features available for adjustment under the highlighted

sub-menu option will appear in the center of the screen.

87.5MHz~108.0MHz

DRC

Off

Employ the Dynamic Range

Control for better playback for

low volumes.

•

AM Frequency Spacing - 5kHz

AM Frequency Band -

S. Amer2

Europe

520kHz~1600kHz

Adjusting a Feature

•

FM Frequency Spacing - 100kHz

FM Frequency Band -

87.5MHz~108.0MHz

Subwoofer

Off

Turn the subwoofer on/off.

1. Use the touchscreen or press the /\ or V buttons (18, 19)

on the joystick to select the feature to be adjusted.

2. Enter the option field for the feature you want to adjust

by using the touchscreen or pressing the >/|| button (16)

on the remote or the ENTER (joystick) button (13) on

the unit. A submenu appears in a second row with the

selected option highlighted in blue.

•

AM Frequency Spacing - 9kHz

AM Frequency Band -

522kHz~1620kHz

FM Frequency Spacing - 50kHz

FM Frequency Band -

87.5MHz~108.0MHz

•

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

P.VOL Sub-menu Features

Setting

Options

Function

NOTE: Record the password and keep it in a safe place

for future reference. The rating for each disc is marked

on the disc, disc packing, or documentation. If the rating

is not available on the disc, the parental lock feature is

unavailable. Some discs restrict only portions of the disc

and the appropriate content will play. For details, please

refer to the disc description.

Setting

Options

Function

Sub.W

Phase

Subwoofer output IN phase

180

Subwoofer output OUT OF

phase

Source

Radio

Disc

Choose a source for which you

would like to increase the rela-

tive volume (LEVEL).

NOTE: Depending on your

installation, reversing the sub-

woofer phase may increase

Bass output.

AUX IN1

AUX IN2

0-6

Hardware Sub-menu Features

Level

Increase relative volume for

specified source up to 6 deci-

bels.

If the rear-view video camera is connected, the unit is on, and

the TFT monitor is retracted inside the unit, the TFT monitor

automatically moves into the viewing position and Camera

mode is selected upon shifting into REVERSE gear. When

shifting into DRIVE gear, the TFT monitor is retracted back

inside unit.

Sub Filter

80Hz

Selecting a crossover fre-

quency sets a cut-off frequency

of the subwoofer's LPF (low-

pass filter).

100Hz

120Hz

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP

menu, select the “TS CAL” option.

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to

prevent unauthorized persons from viewing restricted disc

content. By default, the rating system is unlocked. Once

setup, the parental lock is released only by entering the

correct password. Once the password is entered, rating is

available for setup.

Setting

Options

Function

After entering calibration mode, a crosshair appears in a

corner quadrant of the screen. To begin calibration, press and

hold the crosshair for one second until it moves to the next

quadrant. Continue for each quadrant until the calibration is

completed.

Camera In

Normal

Mirror

Reverse the camera image as

if looking through a rear-view

mirror.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the

SETUP button (29) on the remote control or touch the BACK

button on the screen.

TFT Auto

Open

The TFT panel automatically

opens when the unit is turned

on.

Setting

Options

Function

Password

_ _ _ _

Enter a 4-digit password to

activate the “Rating” feature.

Off

You must press the OPEN but-

ton (1) to open the TFT panel.

Rating

1. Kid Safe Select the appropriate rating

level for the intended audience.

Manual

When the ignition is turned

OFF, the TFT panel DOES

NOT retract if it was previously

out

2. G

You may override higher rat-

ings by using your password.

3. PG

4. PG-13

5. PG-R

6. R

Video Input NTSC

(Input cir-

The color signals are output in

the standard NTSC format.

cuitry auto-

PAL

The color signals are output in

the standard PAL format.

detects the

7. NC-17

8. Adult

Reset

video sig-

nal from the

Aux In

Auto

The color signal output is

switched automatically based

on the current video input sig-

nal - NTSC or PAL.

Load Fac-

tory

Select “Reset” to restore the

factory default settings for the

Rating system only.

source).

If the monitor is in display mode, the monitor automatically

switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor return to its original input

mode.

To reset the password, access the “RATING” menu and enter

the current password. Once the correct password is entered,

you can access the “Password” field and enter a new one.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

TUNER OPERATION

Tuner TFT Display

Switching to Radio Tuner Source

Direct Tuning

•

Touch the top left corner of the screen (the RADIO

circle) to view the SOURCE MENU. Touch “Radio”.

Press the SRC button (6) on the front panel or remote

control (8) to switch to the AM/FM or RADIO source.

To enter a radio station directly, touch the

press the GOTO button (19) on the remote control to display

the direct entry menu.

button or

•

FM-1

P1 87.5 MHz

Selecting FM/AM Band

LOC

01:02 PM

FM: _ _ _ . _ MHz

RADIO

Touch the BAND button (15) on the screen, or press the

BAND button on the unit (4) or remote control (18) to change

between the following bands: FM1, FM2, FM3, AM1, and

AM2.

87.5

MHz

Exit

90.1

98.1

106.1

107.9

102.9

NOTE: The BAND button on the unit only works when the

TFT is closed.

ENT

Clear

BAND

MEM

Seek Tuning

To seek the next higher station:

PS:

Enter the desired radio station using the on-screen number

pad. Press the enter button (arrow) to tune to the selected

station. To exit the screen without changing the station, touch

Exit. To clear your entry and start over, touch Clear.

•

Touch the >>| button on screen.

Press the >>| button (17) on remote control.

Press the > button on the joystick (17).

To seek the next lower station:

1. Current radio band indicator

2. Radio frequency indicator

3. Clock

4. Stereo broadcasting indicator

5. Strong Local signal broadcasting indicator

6. Preset radio stations: Touch to recall preset stations

7. Information about the current function

8. Touch for quick access to Equalizer level settings

9. Touch to access the direct entry screen

10. Current preset station indicator

Using Preset Stations

Six numbered preset buttons store and recall stations for

each band. All six stored stations (P1-P6) for the current

band appear on the screen.

•

Touch the |<<| button on screen.

Press the |<< button (15) on the remote control.

Press the < button on the joystick (16).

Manual Tuning

To increase or decrease the tuning frequency one step:

Storing a Station

1. Select a band (if needed), then select a station.

2. Touch the on-screen MEM button (18) to open the

preset screen.

•

Touch the >> or << buttons on screen.

Press the >> or << buttons (12, 20) on the remote

control.

11. |<<: Touch to seek backward

12. >>|: Touch to seek forward

•

Press the /\ or V buttons (18, 19) on the joystick.

Preset: _

13. <<: Touch to tune backward one step

14. >>: Touch to tune forward one step

15. BAND: Touch to change between AM/FM bands

16. AS: Touch to automatically store stations

17. Touch to view the SOURCE MENU and select a new

playback source

P1 P2

P4 P5

E x i t

18. MEM: View screen used to enter current channel into

preset memory

3. Touch the preset number in which you would like to

store the current station (or press EXIT to cancel and

close the menu). The preset number and station

appears highlighted.

19.

: Touch to view the SETUP menu

20. PS (Preview Scan): Touch to scan all stations available,

stopping for 5 seconds at each and continuing until a

station is selected

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Recalling a Station

1. Select a band (if needed).

2. Touch an on-screen preset button (6) to select the

corresponding stored station.

87.5 MHz

90.1 MHz

98.1 MHz

106.1 MHz

107.9 MHz

102.9 MHz

Auto Store (AS)

To select six strong stations and store them in the current

band:

1. Select a band (if needed).

2. Press the AS/PS button (3) on the control panel or touch

AS (16) on the screen for 2 seconds to activate the Auto

Store function.

The new stations replace stations already stored in that band.

Preview Scan (PS)

To scan the AM or FM band for a preview of available stations

in your particular area, touch the PS button (20). Touch again

to stop preview scan.

Local Radio Station Seeking (LOC)

When the Local function is on, only radio stations with a

strong local radio signal are played. To activate the Local

function in AM/FM tuner mode, press and hold the VOL

(rotary encoder) button (5) on the front panel. Press and hold

the rotary encoder again to turn Local off. When the Local

function is active, the LOC indicator at the top of the screen is

illuminated.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

DVD/VCD VIDEO OPERATION

•

VCD (PBC Off): Repeat Single, Repeat Off

Controlling Playback

NOTE: When properly installed, DVD video cannot be

displayed on the main TFT screen unless the parking

brake is applied. If you attempt to play a DVD while the

vehicle is moving, the TFT screen displays “PARKING”

with a blue background. Rear video screens, if

applicable, will operate normally.

To access the on-screen controls, touch the bottom 1/3 of the

screen while a DVD is playing. Touch the 1/2 button to view a

second page of controls

NOTE: For VCD play, the repeat function is not available

if PBC is on.

Sectional Repeat Function (A-B)

BACK

Use the A-B function to define a specific area of a disc to

repeat.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

•

Press the REPT A-B button (6) on the remote control (or

the A-B button on screen) to set the start point (A) of the

repeated section.

Press the REPT A-B button again once you reach the

desired end point (B) of the repeated section. The

selected portion of the DVD will now repeat

continuously.

AUDIO

To open the TFT video screen, press the OPEN button (1).

The unit beeps and then opens.

A-B

•

Closing the TFT Screen

Press the OPEN button (1) again to close the TFT screen. If

the screen is in the “IN” position, it moves out before closing.

SUB-

TITLE

•

Press the REPT A-B button again to cancel the A-B

section setting and stop repeat play.

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered and disc

play begins.

TITLE

DISP

1/2

2/2

Accessing the DVD Menu

Stopping Playback

Touch the stop button ( ) on the screen or press the

BAND button (20) on the remote control to stop DVD play.

Press the MENU button (1) on the remote control to recall the

main DVD menu. Use the directional (arrow) buttons (<, >, /\

& V) on the joystick (16, 17, 18, 19) to select a title from the

menu or touch the title on screen.

NOTE: If Parental Lock (Rating) is activated and the disc

inserted is not authorized, the 4-digit code must be

entered and/or the disc must be authorized (see “General

Sub-menu Features” on page 11).

Pausing Playback

Press the TITLE button (2) on the remote control or on

screen to select a different title for playback.

Touch the play/pause button (>) on the screen or press the >/

|| button on the remote control (16) to suspend or resume

disc play.

You cannot insert a disc if there is already a disc in the unit or

if the power is off.

Press the >/|| button (16) on the remote control or the ENTER

(joystick) button (20) to confirm your selection and begin

playback. You can also select a title using the touch screen.

Slow Motion Playback

NOTE: DVD-R and DVD-RW will not play unless the

recording session is finalized and the DVD is closed.

Press the << button (20) on the remote control, the V button

(11) on the joystick, or the << button on the screen to play the

current title in slow motion. Keep pressing and releasing the

button to increase the rate from “2X” to “4X”, “8X”, and “20X”.

Moving Through Chapters

Press the >>| button (17) on the remote control, the > button

on the joystick (17) or the >>| button on screen to advance to

the next chapter on the DVD.

Ejecting a Disc

Press >/|| (16) on the remote control or touch the on-screen

play button (>) to resume normal play.

Press the button (21) on the unit or remote control (23) to

eject the disc. The unit automatically reverts to Tuner mode.

You may eject a disc with the unit powered off. The unit will

remain off after the disc is ejected.

Press the |<< button (15) on the remote control, the < button

on the joystick (16), or the |<< button on screen to move to

the previous chapter.

Fast Forward Playback

Press the >> button (12) on the remote control, the /\ button

(15) on the joystick, or the >> button on the screen to fast

forward. Keep pressing and releasing the button to increase

the rate from “2X” to “4X”, “8X”, and “20X”.

Resetting the Loading Mechanism

Goto Search

During DVD or VCD playback, perform the following steps to

use the GOTO feature to access a specific location on a disc:

If the disc loads abnormally or an abnormal core mechanism

operation occurs, press and hold the button (21) on the

unit or remote control (23) to reset the loading mechanism.

Normal operation resumes.

Press >/|| (16) on the remote control or touch the on-screen

play button (>) to resume normal play.

1. Press the GOTO button (19) on remote control to enter

“GO TO” mode.

2. Press the >> or << buttons (14, 22) on the remote

control or the < or > buttons (16, 17) on the joystick to

select a category (highlighted in blue).

Repeat Playback

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted,

press the SRC button (15) on the front panel or remote

control (8) until “DISC” appears at the bottom of the screen.

Press the REPT button (7) on the remote control or the

button on screen to alter repeat mode according to the

following:

•

DVD: Repeat Chapter, Repeat TItle, Repeat Off

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

•

For DVD mode, you can choose Time or Title/

Chapter search.

Touch Screen Direct Entry

PBC - Play Back Control (VCD Only)

For VCDs with play back functionality, play back control

(PBC) provides additional controls for VCD playback.

To select a chapter/track directly, touch the

screen control to display the direct entry menu.

button on

DVD Search

Press the MENU button (1) on the remote control to toggle

the PBC function “On”/”Off”. Once PBC is on, playback starts

from track one of the play list.

Time – Go to specific

time in current title

Chapter: _ _

Title/Chapter – Go to

specific time in a

chapter

NOTE: When PBC is activated, fast forward, slow

playback, and previous/next track are available. Repeat

and direct track selection are not available.

Exit

•

For VCD mode, press the GOTO button to choose

between Track Search, Disc Search and Exit.

When PBC is activated, selecting random, scan, or search

playback automatically deactivates PBC.

ENT

Clear

VCD Track Search

Playback Information

Time – Go to specific

time in the current track

During DVD and VCD playback, press the DISP button (10)

on the remote control to display playback information on the

screen, including the media playing and current playback

time.

Enter the desired chapter/track using the on-screen number

pad. Press the enter button (arrow) to tune to the selected

station. To exit the screen without changing the station, touch

Exit. To clear your entry and start over, touch Clear.

Track – Go to specific

track

VCD Disc Search

DVD Playback Information

Time – Go to specific

time on disc

The following information is displayed at the top of the screen

during DVD playback:

Viewing an Alternate Picture Angle

(DVD Only)

Track – Go to specific

track

Some DVDs contain scenes that have been shot

simultaneously from different angles. For discs recorded with

multiple angles, press the ANGLE button (11) on the remote

control to toggle available angles of the on-screen image.

3. Enter a time into the field using the numeric keypad (29)

on the remote control.

4. Press the >/|| button (18) on the remote control or the

ENTER (joystick) button (20) to go to the specified

location on the disc.

•

T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is

currently playing.

C : 2/16 – “2 / 16" indicates that the second of 16 titles

on the DVD is currently playing.

00:41:28 – “00:41:28” indicates the playback time of the

current title.

2 / 6 Eng – The language display information

indicates the second language out of 6 (English) is

currently being used.

Zooming

Press the ZOOM button (21) on the remote control to enlarge

and pan through the video image using the following options:

“Q1”, “Q2”, “Q3”, “Q4” and “OFF”.

5. Press the GOTO button again to exit.

Direct Chapter / Track Selection

Remote Control Direct Entry

Multi-Language Discs (DVD Only)

Changing Audio Language

During DVD, VCD and CD playback, you can use the

numeric keypad on the remote control (27) to access a track

directly.

VCD Playback Information

If you are watching a disc recorded in multiple languages,

press the VOL button (5) on the remote control to choose a

language.

The following information is displayed at the top of the screen

during VCD playback:

Changing Subtitle Language

If you are watching a disc recorded in multiple languages with

subtitles, press the SUBTITLE button (9) on the remote

control to choose the language in which you would like the

subtitles to appear.

•

VCD2.0 – Format of current disc.

T: 6/18 – “6/18” indicates the sixth of 18 tracks on the

VCD is currently playing.

•

00:02:18 – “00:02:18” indicates the playback time of the

current track.

NOTE: During VCD playback, press the VOL button (5)

on the remote control to choose between Left Channel,

Right Channel, and Stereo.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Table 6: Disc Symbols

Meaning

General Disc Information

Table 5: Disc Properties

Symbol

Indicates the region code where the disc

can be played.

Max Play

Time

Symbol

12cm Disc Properties

•

Region 1: USA, Canada, East Pacific

Ocean Islands

Single side single layer

(DVD-5)

(MPEG 2

Method)

133 minutes

242 minutes

266 minutes

484 minutes

•

Region 2: Japan, Western Europe,

Northern Europe, Egypt, South Africa,

Middle East

Single side double layer

(DVD-9)

Double side single layer

(DVD-10)

•

Region 3: Taiwan, Hong Kong, South

Korea, Thailand, Indonesia, South-East

Asia

Region 4: Australia, New Zealand,

Middle and South America, South

Pacific Ocean Islands/Oceania

Region 5: Russia, Mongolia, India,

Middle Asia, Eastern Europe, North

Korea, North Africa, North-West Asia

Region 6: Mainland China

Double side double layer

(DVD-18)

Single side single layer

(VCD)

(MPEG 1

Method)

74 minutes

Single side single layer

74 minutes

•

Table 6: Disc Symbols

Meaning

ALL: All regions

Symbol

Number of voice languages recorded. The

number inside the icon indicates the num-

ber languages on the disc (maximum of 8).

Number of subtitle languages available on

the disc (maximum of 32).

Number of angles provided (maximum of

9).

Aspect ratios available. “LB” stands for Let-

ter Box and “PS” stands for Pan/Scan. In

the example on the left, the 16:9 video can

be converted to Letter Box video.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

DVD/CD AUDIO OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and CD operation. Please see the DVD/Disc Video

Operation section for information about these topics.

14. Touch to access the direct entry screen

Fast Forward

Touch the >> button on screen, press the >> button (12) on

the remote control, or press the /\ button (18) on the joystick

to fast forward. Keep pressing and releasing the button to

increase the rate from “2X” to “4X”, “8X”, and “20X”.

15. : Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

17. Touch to view the SOURCE MENU and select a new

playback source

The UV8 will play music or other audio files from the following

disc media:

•

CD-DA

CD-R/RW

DVD

DVD+R/RW

DVD-R/RW

Direct Track Entry

Controlling Playback

Stopping Playback

To select a track directly, touch the

control to display the direct entry menu.

button on screen

Touch the button on screen or press the /BAND button

(18) on the remote control to stop disc play.

Upon inserting a disc with the TFT screen open, the disc and

track title (if available), along with the track number and

playing time appear on the screen.

To resume playback, touch the /|| button on screen, press

the joystick button (13) on the front panel, or press the >/||

button on the remote control (16).

Chapter: _ _

Exit

Pausing Playback

CD Player User Interface

The on-screen indicators and touch key areas for CD

playback are outlined below.

Touch the /|| button on screen, press the joystick button (13)

on the front panel, or press the >/|| button on the remote

control (16) to suspend or resume disc play.

ENT

Moving Through Tracks

Clear

Press the >>| button (17) on the remote control or on screen

or use the > button on the joystick (14) to advance to the next

track on the disc.

Enter the desired track using the on-screen number pad.

Press the enter button (arrow) to tune to the selected station.

To exit the screen without changing the station, touch Exit. To

clear your entry and start over, touch Clear.

CD T: 1/10

00:00:23

01:02 PM

DISC

Press the |<< button (15) on the remote control or on screen

or use the < button on the joystick (10) to move to the

previous track.

Track

Repeat Playback

Touch the

button on screen or press the REPT button (7)

on the remote control to alter repeat mode according to the

following:

•

DVD: Repeat Chapter, Repeat Title, Repeat Off

CD-DA: Repeat Single, Repeat Off

CD-R/RW: Repeat Single, Repeat Off

DVD-R/RW: Repeat Single, Repeat Off

Track Scan Select (CD-DA discs only)

1. Current track and total number of tracks on disc

2. Elapsed playing time

3. Current time

4. Track titles

5. Disc title

During disc play, press the SCAN button (30) on the remote

control to play the first 10 seconds of each track. When a

desired track is reached, press the SCAN button again to

cancel the function and play the selected track.

/||: Touch to play/pause disc playback

: Touch to stop disc playback

Random Play Select

While disc play is stopped, touch the

play the tracks on the disc in a random, shuffled order. Touch

the (RDM) button again to cancel Random Play mode.

button on screen to

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

10. >>: Touch to fast forward current track

11. <<: Touch to rewind current track

12. Touch to activate/deactivate Repeat play mode

13. Touch to activate/deactivate Random mode

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

MP3/WMA OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and MP3 operation. Please see the DVD/Disc Video

Operation section for information about these topics.

MP3 Playing Order

MP3 Player User Interface

The on-screen indicators and touch key areas for MP3

playback are outlined below.

When selected for play, files and folders (Folder Search, File

Search or Folder Select) are accessed in the order they were

written by the CD writer. As a result, the order in which they

are expected to be played may not match the order in which

they are actually played. You may be able to set the order in

which MP3/WMA files are to be played by writing them onto a

medium such as a CD-R with their file names beginning with

play sequence numbers such as "01" to "99".

Media and File Requirements

This player allows you to play back MP3 and WMA files

recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs.

For CD-RW discs, please make sure it is formatted using the

full method and not the quick method to prevent illegal disc

operation.

(Root)

MP3 4/84

00:00:23

01:02 PM

DISC

For example, a medium with the following folder/file hierarchy

is subject to Folder Search, File Search or Folder Select, as

shown below.

Cherry Poppin Dad

Chris Isaak - Baby

Crazy Town - Butt

Phish - Birds Of A

Phish - Bouncin' R

Phish - Freebird (L

Up to 1500 songs/files can be burned onto a disc for a MEGA

DVD music mix. Do not exceed this number of songs/files or

disc readability problems may occur.

MP3 Format Compatibility

The file naming formats listed below are compatible with this

unit:

DIR -

DIR +

•

ISO 9660 – file name: 12 characters, file extension: 3

characters

ISO 9660 – file name: 31 characters, file extension: 3

characters

Joliet – 64 characters

1. Current track and total number of tracks on disc

2. Elapsed playing time

3. Current time

4. Track titles

5. ID3 information

If the file or folder name does not conform to ISO 9660 file

system standards, it may not be displayed or played back

correctly. Use the following settings when compressing audio

data for your MP3 disc:

•

Transfer Bit Rate: 128kbps

Sampling Frequency: 48kHz

/||: Touch to play/pause disc playback

: Touch to stop disc playback

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

When recording MP3 up to the maximum disc capacity,

disable additional writing. For recording on an empty disc up

to maximum disc capacity, use the "Disc at once" setting.

10.

11.

: Touch to view the next page of songs

: Touch to view the previous page of songs

12. DIR -: Touch to view the previous folder

13. DIR +: Touch to view the next folder

14. Touch to access the direct entry screen

The UV8 player will only recognize three folder levels and

does not display folders containing only other folders. In the

example above, the unit will display folders 3, 4, 6, and 8, but

not 2 and 7 since they do not contain any tracks directly.

Folder 5 is not recognized at all since it is at the fourth level.

15.

: Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

17. Touch to view the SOURCE MENU and select a new

playback source

18. Folder name

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Controlling Playback

Playing MP3/WMA Files

After inserting a MP3/WMA disc, files will play in the

sequence of the “Root’ directory.

NOTE: When burning MP3 / WMA files onto a DVD disc,

use the 2X or 4X burning option, if available. This slower

burning speed will help eliminate buffer errors and

increase disc reading reliability. Also, use folders when

burning large numbers of songs / files to a disc for easy

music navigation. Select the "Disc at Once" option and

close your disc.

Stopping Playback

Touch the button on screen or press the /BAND button

(18) on the remote control to stop disc play.

To resume playback, touch the /|| button on screen, press

the joystick button (13) on the front panel, or press the >/||

button on the remote control (16).

Pausing Playback

Touch the /|| button on screen, press the joystick button (13)

on the front panel, or press the >/|| button on the remote

control (16) to suspend or resume disc play.

Moving Through Tracks

Press the >>| button (17) on the remote control or on screen

or use the > button on the joystick (14) to advance to the next

track on the disc.

Press the |<< button (15) on the remote control or on screen

or use the < button on the joystick (10) to move to the

previous track.

Repeat Playback

Press the REPT button (7) on the remote control to alter

repeat mode according to the following: Repeat Single,

Folder Repeat, Repeat Off

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

Direct Track Entry

Use the numeric keypad (27) on the remote control to access

files directly or press the

on page 18).

button (see “Direct Track Entry”

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

TROUBLESHOOTING

Table 7: Troubleshooting

Problem

Cause

Corrective Action

GENERAL

Unit will not power on

Radio Fuse blown

Install new fuse with correct rating

Car battery fuse blown

Illegal operation

Press the RESET button located in the bottom right corner of the front panel

Replace battery with new one

Remote control does not function

No/low audio output

Battery depleted

Battery installed incorrectly

Improper audio output connection

Volume set too low

Remove battery and install correctly

Check wiring and correct

Increase volume level

Improper “MUTE” connection

Speakers damaged

Review wiring diagram and check “MUTE” connection

Replace speakers

Heavily biased volume balance

Adjust the channel balance to the center position

Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections

Poor sound quality or distortion

Pirated disc is in use

Use original copy

Speaker power rating not compatible with unit

Speaker is shorted

Connect proper speakers

Check speaker contact

Check wiring and correct

Unit resets itself when engine is off

Incorrect connection between ACC and positive

battery wire

TFT MONITOR

Monitor does not open automatically

No image

TFT Auto Open is turned off

Turn TFT Auto Open on

Incorrect connection to parking brake wire

Parking brake is not engaged

Check wiring and correct

Stop vehicle in safe place and apply parking brake

Change setup to accommodate disc

Flashing image or interference appears on

screen

DVD is not compatible with current TV system

settings

Improper video signal connections

Improper aspect ratio setup

Check wiring and correct

Prolonged image or improper height/width

ratio display

Use correct aspect ratio setting

Monitor stops at incorrect position

TUNER

Moving path is blocked

Press OPEN key to restart monitor movement

Weak station searching

Auto antenna is not fully extended

Auto antenna not properly connected

LOCAL function is activated

Disc already inside unit

Connect the auto antenna control cable properly

Turn LOCAL function off

Cannot insert disc

Eject current disc and insert new one

Use original disc

Image blurred, distorted, or dark

Disc is illegally copied

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Table 7: Troubleshooting

Problem

Cause

Corrective Action

Disc does not play back

Disc is warped or scratched

Disc is dirty or wet

Use disc in good condition

Clean disc with soft cloth

Clean laser pickup with cleaning disc

Use compatible disc

Laser pickup is dirty

Incompatible disc is used

Disc rating exceeds Parental Lock rating limit

Disc region code is not compatible with unit

Disc is inserted upside down

PCB is not available on the disc

PCB is on

Change Parental Lock settings to lower restriction

Use disc with proper region code

Insert disc with label side up

PBC cannot be used during VCD playback

No repeat or searching while playing VCD

MP3

Turn PCB off

Interruption occurred during playback

Disc is dirty or scratched

Clean disc or replace

File is damaged/bad recording

Message is longer than LCD can display

Recreate disc with good files

Incorrect playback message displayed

Error Messages

Table 8: Error Messages

Message Displayed

Cause

Corrective Action

No Disc

Disc is being read

Disc is dirty

Clean disc with soft cloth

Insert disc with label side up

Insert disc

Disc is upside down

Disc not present in loading compartment

Disc is dirty

Bad Disc

Clean disc with soft cloth

Insert disc with label side up

Disc is upside down

Unknown disc

Region Error

Error

Disc format is not compatible with this unit

DVD is not compatible with region code of unit

Illegal mechanism operation

Press EJECT key for 5 seconds to reset loading mechanism

4. Never insert anything other than a 5” (12 cm) compact

vehicle to reach a normal temperature before using

player.

Care and Maintenance

disc into the player as the mechanism can be damaged

by foreign objects.

5. Do not attempt to use a 3” (8 cm) CD-Single disc in this

unit, either with or without an adaptor, as damage to the

player and/or disc may occur. Such damage is not

covered by the Warranty on this product.

1. Use only a clean silicone cloth and neutral detergent to

clean the front panel or monitor. A rough cloth and non-

neutral detergent (such as alcohol) may result in

scratching or discoloration.

2. Do not get water or cleaning fluids on the unit.

3. If the temperature inside the player gets too hot, a

protective circuit automatically stops play of the disc. If

this occurs, allow the unit to cool before operating the

player again.

7. When the vehicle warms up during cold weather or

under damp conditions, condensation may appear on

the LCD panel. Should this occur, the screen will not

operate properly until the moisture has evaporated.

8. We suggest you use a cleaning disc in this unit more

frequently than in the unit in your home due to the

environmental conditions of the vehicle.

6. The CD player may not operate properly in extreme hot

or cold. If such conditions occur, allow the interior of the

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

SPECIFICATIONS

DVD/CD Player

CEA Power Ratings

Compatible Disc Media: DVD + R / RW (Single and Dual

Layer) and CD-R / RW

Compatible Media Formats: CD-DA, MP3, WMA, VCD,

SVCD, DivX, Xvid, AVI, MPEG1 / 2

Signal to Noise Ratio: >95dBA

Dynamic Range: >95dB

Frequency Response: 20Hz to 20 kHz, -3dB

Channel Separation: > 60dB @ 1 kHz

D/A Converter: High performance 24-bit / 192 kHz sample

rate, Multi-Bit Sigma-Delta Modulator

Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ <

1% THD+N

Signal to Noise Ratio: 70dBA below reference (Reference: 1

Watt, 4-Ohms)

Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used

as reference input)

Video

Format: NTSC, PAL (auto-detection)

Output: 1Vp-p (75-ohm)

Input: 1Vp-p (75-ohm)

Reference Supply Voltage: 14.4VDC

FM Tuner

Tuning Range: 87.5MHz - 107.9MHz

Mono Sensitivity (-30dB): 9dBf

Quieting Sensitivity (-50dB): 15dBf

Alternate Channel Selectivity: 70dB

Signal to Noise Ratio @ 1 kHz: 58dB

Image Rejection: 80dB

*Specifications subject to change without notice.

Stereo Separation @ 1 kHz: >30dB

Frequency Response: 30Hz - 15 kHz, -3d

AM Tuner

Tuning Range: 530 kHz - 1720 kHz

Sensitivity (-20dB): 15uV

Signal to Noise Ratio @ 1 kHz: 50dB

Image Rejection: 60dB

Frequency Response: 50Hz - 2 kHz, -3dB

Monitor

Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen,

6.06" (154.1mm) W X 3.42" (87mm) H

Screen Type: TFT Liquid Crystal Display (LCD) active matrix

Resolution: 336,960 sub pixels, 1440 (W) X 234 (H)

General

Auxiliary Input impedance: 10k

Power Supply: 11 to 16VDC, negative ground

Power Antenna (Blue): 500mA max, current limited protection

Amplifier Remote (Blue/White): 500mA max, current limited

protection

Operating Temperature: -20C ~ 65C

Fuse: 15-amp, mini ATM type

DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x

50mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

UV8

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

DO NOT RETURN THIS PRODUCT TO THE STORE

CD or Multimedia Radios/Headunits

Audiovox Electronics Corporation (“the Company”) is committed to

quality and customer service, and are pleased to offer you this

Warranty. Please read it thoroughly and contact the Company at 1-800-

323-4815 with any questions.

Limitations

THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,

IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

Who is covered?

The Company extends this warranty to the original retail purchaser of products

purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or

Canada. This warranty is not transferable or assignable. Proof of purchase is

required in the form of an original sales receipt.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED

WARRANTIES,

INCLUDING

ANY

IMPLIED

WARRANTY

MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS

WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY

HEREUNDER

INCLUDING

ANY

IMPLIED

WARRANTY

What is covered?

MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24

MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE

COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. No person or representative is authorized to

assume for the Company any liability other than expressed herein in connection

with the sale of this product.

The Company warrants that should this product or any part thereof, under normal

use, be proven defective in material or workmanship within 12 months from the

date of original purchase, such defect(s) will be repaired or replaced with a new or

reconditioned product (at the Company's option) without charge for parts and

repair labor.

What is not covered?

This Warranty does not cover the following:

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above

limitations or exclusions may not apply to you. This Warranty gives you specific

legal rights and you may also have other rights which vary from state to state.

•

Damage incurred during shipping or transporting the product to the

Company or a service center

•

Elimination of car static or motor noise

Defects in cosmetic, decorative or non-operative structural parts

Correction of antenna problems

Costs incurred for installation, removal or reinstallation of the product

Consequential damage to compact discs, USB devices, digital media

cards, accessories or vehicle electrical systems

Obtaining Warranty Service

•

To obtain repair or replacement within the terms of this Warranty,

call 1-800-323-4815 for the location of a warranty station serving

your area.

•

Damage caused by improper installation, mishandling, misuse, neglect,

accident, blown fuse, battery leakage, theft or improper storage

Products whose factory serial number/bar code label(s) or markings

have been removed or defaced

Damage resulting from moisture, humidity, excessive temperature,

extreme environmental conditions or external natural causes

•

You must prepay the initial shipping charges to the Company.

The Company will pay the return shipping charges for all

warranteed products returned to an address within the U.S.A.,

Puerto Rico or Canada.

Please package the product securely to avoid shipping damage.

We recommend using a carrier that provides tracking service to

prevent lost packages. Lost or damaged packages are not

covered by this warranty.

•

Please review the “Care and Maintenance” section of your Installation

and Operation Manual for additional information regarding the proper

use of your product.

Provide a detailed description of the problem(s) for which you

require service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audiovox Electronics Corporation

Hauppauge, NY 11788

Technical Assistance: 1-800-323-4815

www.audiovox.com

Ver. 041107

Printed in China

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Microwave Oven FM 70 P1 MR User Manual
Indesit Refrigerator IN C 325 AI UK User Manual
Indesit Washer IWE 7125 User Manual
John Deere Compact Loader 160G LC User Manual
Jonsered Lawn Mower LM2150 User Manual
JVC Camcorder 0206ASR NF VM User Manual
JVC Headphones HAW600RF User Manual
JVC Stereo Receiver LVT0870 006A User Manual
KitchenAid Oven KEBK101SBL04 User Manual
Kompernass Electric Cookie Press KH 1191 User Manual