Jackson Dishwasher Avenger HT User Manual
AVENGER™ UNDERCOUNTER DISHMACHINE SERIES  
INSTALLATION/OPERATION &  
TECHNICAL MANUAL  
FOR JACKSON MODELS:  
™
Avenger HT  
™
Avenger LT  
Jackson MSC LLC.  
P.O. BOX 1060  
HWY. 25E  
BARBOURVILLE, KY. 40906  
PHONE (606) 523-9795  
FAX (606) 523-9196  
www.jacksonmsc.com  
August 6, 2007  
P/N 7610-003-34-01 (Revision A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOP!  
PARE!  
ARRET!  
CALL 1-888-800-5672 TO REGISTER THIS PRODUCT!  
FAILURE TO DO SO WILL VOID THE WARRANTY!  
LLAME AL 1-888-800-5672 PARA REGISTRAR ESTE PRODUCTO!  
AL NO HACERLO LA GARANTIA SERA ANULADA!  
S.V.P. APPELER 1-888-800-5672 POUR ENREGISTRER CE PRODUIT,  
LA GARANTIE SERA ANNULEE POUR TOUT PRODUIT NON- ENREGISTREE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REVISION/ REVISION  
MADE APPLICABLE  
DETAILS  
PAGE  
DATE  
BY  
ECN  
A
05-02-07  
MAW  
N/A  
Release to production.  
B
05-22-07  
08-06-07  
JDD  
7920  
7930  
Changed schematics to new color scheme  
29  
MAW  
Updated AvengerHT Incoming plumbing assembly.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL  
Avenger™LT  
Avenger™HT = High temperature, hot water sanitizing, with a booster tank.  
Detergent & rinse aid chemical feeder pumps.  
Avenger™LT = Low temperature, chemical sanitizing, no booster tank.  
Detergent, rinse aid & sanitizer chemical feeder pumps.  
Jackson MSC LLC. provides technical support for all  
Model:  
of the dishmachines detailed in this manual. We  
strongly recommend that you refer to this manual  
before making a call to our technical support staff.  
Please have this manual with you when you call so  
that our staff can refer you, if necessary, to the prop-  
er page. Technical support is available from 8:00  
a.m. to 5:00 p.m. (EST), Monday through Friday.  
Technical support is not available on holidays.  
Contact technical support toll free at 1-888-800-  
5672. Please remember that technical support is  
available for service personnel only.  
Serial No.:  
Installation Date:  
Service Rep. Name:  
Phone No.:  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
SECTION  
I.  
DESCRIPTION  
PAGE  
SPECIFICATION INFORMATION  
Specifications Avenger™HT  
Specifications Avenger™LT  
Dimensions Avenger™HT  
Dimensions Avenger™LT  
2
3
4
5
II.  
INSTALLATION/OPERATION INSTRUCTIONS  
Installation Instructions  
7
Electrical Installation Instructions  
Chemical Dispensing Equipment  
Programming Instructions for Chemical Feeder Pumps  
Detergent Control  
8
9
10  
11  
12  
Operation Instructions  
III.  
PREVENTATIVE MAINTENANCE  
Preventative Maintenance  
15  
17  
IV.  
V.  
TROUBLESHOOTING  
PARTS SECTION  
Control Panel Weldment Assemblies  
Control Panel Assembly/Kick Panel Weldment, Avenger™HT  
Control Panel Assembly/Kick Panel Weldment, Avenger™LT  
Terminal Block Box Assembly  
Chemical Feeder Pump Assembly, Avenger™HT  
Chemical Feeder Pump Assembly, Avenger™LT  
Chemical Feeder Pump Components  
Incoming Plumbing Assembly, Avenger™HT  
Incoming Plumbing Assembly, Avenger™LT  
Solenoid Valve Repair Kit/Vacuum Breaker Repair Kit/  
Water Pressure Regulator Kit (WPRK Option)  
Wash Motor/Drain Plumbing Assembly  
Avenger™LT Wash Manifold Assembly  
Motor & Pump Assembly  
20  
21  
22  
23  
24  
26  
28  
29  
30  
31  
31  
32  
32  
34  
35  
36  
37  
39  
40  
41  
42  
43  
44  
Rinse Arm & Wash Arm Assemblies  
Thermostat & Rinse Tank Assembly  
Door Assembly  
Miscellaneous Door Components  
Frame & Panel Components  
Miscellaneous Parts  
Stands, 6” & 18”  
HTS-11 Scale Prevention and Corrosion Control Device  
Go*Box Kit  
VI.  
SCHEMATICS  
Avenger™HT 115 V, 60 HZ, single phase  
Avenger™LT 115 V, 60 HZ, single phase  
46  
47  
VII.  
JACKSON MAINTENANCE & REPAIR CENTERS  
49  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1:  
SPECIFICATION INFORMATION  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1: SPECIFICATION INFORMATION  
SPECIFICATIONS of the AVENGER™HT  
PERFORMANCE/CAPABILITIES  
ELECTRICAL REQUIREMENTS  
OPERATING CAPACITY (RACKS/HOUR)  
RACKS PER HOUR  
WASH MOTOR HP  
3/4  
30  
NOTE: Typical Electrical Circuit is based upon (1) 125% of the  
full amperage load of the machine and (2) typical fixed-trip cir-  
cuit breaker sizes as listed in the NEC 2002 Edition. Local  
codes may require more stringent protection than what is dis-  
played here. Always verify with your electrical service con-  
tractor that your circuit protection is adequate and meets all  
applicable national and local codes. These numbers are pro-  
vided in this manual simply for reference and may change  
without notice at any given time.  
DISHES PER HOUR  
600  
600  
GLASSES PER HOUR  
OPERATING CYCLE (SECONDS)  
WASH TIME  
82  
28  
10  
2
DRAIN TIME  
RINSE TIME  
Avenger™HT:  
TOTAL CYCLE TIME (MINUTES)  
RINSE  
HEATER  
RATINGS  
TYPICAL  
ELECTRICAL  
CIRCUIT  
TOTAL  
AMPS  
VOLTS  
PH  
HZ  
5 MINUTE TIMER OPERATING CYCLE (SECONDS)  
208  
230  
1
1
60  
60  
8.2KW @ 230V  
8.2KW @ 230V  
39 A  
42 A  
50 AMP  
60 AMP  
WASH TIME  
262  
28  
10  
5
DRAIN TIME  
RINSE TIME  
NOTE: Always refer to the machine data plate for specific  
electrical and water requirements. The material provided on  
this page is for reference only and may be subject to change  
without notice.  
TOTAL CYCLE TIME (MINUTES)  
TANK CAPACITY (LITERS) (GALLONS)  
WASH TANK  
RINSE TANK  
(4.2) 1.1  
(11.4) 3  
TEMPERATURES  
WASH--- (MINIMUM)  
RINSE---(MINIMUM)  
(65.6°C) 150°F  
(82.2°C) 180°F  
WATER REQUIREMENTS  
INLET TEMPERATURE (MINIMUM)*  
INLET TEMPERATURE (RECOMMENDED)  
WATER LINE SIZE I.P.S. (MINIMUM)  
DRAIN LINE SIZE I.P.S. (MINIMUM)  
FLOW PRESSURE P.S.I.  
(43.3°C) 110°F  
(60°C) 140°F  
1/2”  
1 1/2”  
20  
5
* In some cases, this may automatically extend the wash cycle  
time.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1: SPECIFICATION INFORMATION  
SPECIFICATIONS of the AVENGER™LT  
ELECTRICAL REQUIREMENTS  
PERFORMANCE/CAPABILITIES  
OPERATING CAPACITY (RACKS/HOUR)  
RACKS PER HOUR  
WASH MOTOR HP  
3/4  
24  
NOTE: Typical Electrical Circuit is based upon (1) 125% of the  
full amperage load of the machine and (2) typical fixed-trip cir-  
cuit breaker sizes as listed in the NEC 2002 Edition. Local  
codes may require more stringent protection than what is dis-  
played here. Always verify with your electrical service con-  
tractor that your circuit protection is adequate and meets all  
applicable national and local codes. These numbers are pro-  
vided in this manual simply for reference and may change  
without notice at any given time.  
DISHES PER HOUR  
600  
600  
GLASSES PER HOUR  
OPERATING CYCLE (SECONDS)  
WASH TIME  
56  
DRAIN TIME  
26  
RINSE TIME  
35  
Avenger™LT:  
TOTAL CYCLE TIME  
120  
RINSE  
HEATER  
RATINGS  
TYPICAL  
ELECTRICAL  
CIRCUIT  
TOTAL  
AMPS  
TEMPERATURES  
VOLTS  
PH  
HZ  
WASH --- (MINIMUM)  
(48.9°C) 120°F  
(60°C) 140°F  
(48.9°C) 120°F  
(60°C) 140°F  
115  
1
60  
N/A  
14 A  
20 AMP  
WASH --- (RECOMMENDED)  
RINSE --- (MINIMUM)  
NOTE: Always refer to the machine data plate for specific  
electrical and water requirements. The material provided on  
this page is for reference only and may be subject to change  
without notice.  
RINSE --- (RECOMMENDED)  
WATER REQUIREMENTS  
INLET TEMPERATURE (RECOMMENDED) (60°C) 140°F  
INLET TEMPERATURE (MINIMUM)  
WATER LINE SIZE I.P.S. (MINIMUM)  
DRAIN LINE SIZE I.P.S. (MINIMUM)  
FLOW PRESSURE P.S.I.  
(48.9°C) 120°F  
1/2”  
1 1/2”  
20  
50  
5
MINIMUM CHLORINE REQUIRED (PPM)  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1: SPECIFICATION INFORMATION  
Avenger™HT DIMENSIONS  
WALL  
B
TOP  
Wall Clearance  
LEGEND:  
9
1
1
[40mm]  
[6mm]  
4
16  
A - Water Inlet - 1/2" Female Pipe Thread,  
2 1/2" AFF (Connect to a true 1/2" ID  
water line)  
1
4
1
[32mm]  
A
B - Electrical Connection  
3
3
25 [644mm]  
23 [604mm]  
4
8
NOTES:  
10' coiled drain hose. Shipped inside  
machine. Must be installed no more  
than 24" AFF.  
All dimensions from floor can be increased  
1" with adjustable feet supplied.  
5
16 [423mm]  
Door Open  
8
3
24 [615mm]  
16  
BACK  
FRONT  
1421" [368mm]  
DISH  
5
3
[84mm]  
B
CLEARANCE  
16  
5
33 [846mm]  
16  
A
1
11 [292mm]  
7
2
[22mm]  
8
1
4
[105mm]  
8
*All dimensions are for reference only and are subject to change without notice.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1: SPECIFICATION INFORMATION  
Avenger™LT DIMENSIONS  
WALL  
B
TOP  
Wall Clearance  
LEGEND:  
9
1
1
[40mm]  
[6mm]  
4
16  
A - Water Inlet - 1/2" Female Pipe Thread,  
2 1/2" AFF (Connect to a true 1/2" ID  
water line)  
1
4
1
[32mm]  
A
B - Electrical Connection  
3
3
25 [644mm]  
23 [604mm]  
4
8
NOTES:  
10' coiled drain hose. Shipped inside  
machine. Must be installed no more  
than 24" AFF.  
All dimensions from floor can be increased  
1" with adjustable feet supplied.  
5
16 [423mm]  
Door Open  
8
3
24 [615mm]  
16  
BACK  
FRONT  
1321" [343mm]  
DISH  
1
2
3
[89mm]  
B
CLEARANCE  
5
33 [846mm]  
16  
A
1
11 [292mm]  
2
5
4
[110mm]  
16  
*All dimensions are for reference only and are subject to change without notice.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2:  
INSTALLATION/OPERATION  
INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
INSTALLATION INSTRUCTIONS  
VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi-  
cator that there may be some damage to the machine. If there is damage to both the container and machine, do not throw away  
the container. The dishmachine has been inspected and packed at the factory and is expected to arrive to you in new, undam-  
aged condition. However, rough handling by carriers or others may result in there being damage to the unit while in transit. If  
such a situation occurs, do not return the unit to Jackson; instead, contact the carrier and ask them to send a representative to  
the site to inspect the damage to the unit and to complete an inspection report. You must contact the carrier within 48 hours of  
receiving the machine. Also, contact the dealer through which you purchased the unit.  
UNPACKING THE DISHMACHINE: Once the machine has been removed from the container, ensure that there are no miss-  
ing parts from the machine. This may not be obvious at first. If it is discovered that an item is missing, contact Jackson imme-  
diately to have the missing item shipped to you.  
LEVEL THE DISHMACHINE: The dishmachine is designed to operate while being level. This is  
important to prevent any damage to the machine during operation and to ensure the best results  
when washing ware. The unit comes with adjustable bullet feet, which can be turned using a pair  
of channel locks or by hand if the unit can be raised safely. Ensure that the unit is level from side  
to side and from front to back before making any connections.  
Adjustable Bullet Foot  
PLUMBING THE DISHMACHINE: All plumbing connections must comply with all applicable  
local, state, and national plumbing codes. The plumber is responsible for ensuring that the  
incoming water line is thoroughly flushed prior to connecting it to any component of the dish-  
machine. It is necessary to remove all foreign debris from the water line that may potential-  
ly get trapped in the valves or cause an obstruction. Any valves that are fouled as a result  
of foreign matter left in the water line, and any expenses resulting from this fouling, are not  
the responsibility of the manufacturer. A water hardness test must be performed to deter-  
mine if the HTS-11 (scale prevention and corrosion control) need to be installed. A hardness  
test kit is attached to the warning tag that is attached to the incoming plumbing connection  
on the back of the machine. If the hardness is higher than 5 GPG the HTS-11 will need to  
be installed, please contact Jackson immediately to have this item shipped to you.  
B Drain Hose  
WATER SUPPLY CONNECTION FOR MACHINES WITH A WATER HARDNESS  
GREATER THAN 5 GPG: Ensure that you have read the section entitled “PLUMBING THE  
DISHMACHINE” above before proceeding. Install the HTS-11 into the water line (1/2” ID  
pipe size minimum) before the dishmachine line incoming water connection point using cop-  
m
per pipe. The HTS-11 must be installed vertically. A mounting bracket is provided to facili-  
tate the venture metering head to the wall. Observe proper inlet/outlet water directions. Flow  
directions are molded into the top of the head. It is recommended that a water shut-off valve  
be installed before the HTS-11 to allow access for servicing. Plumb from the HTS-11 outlet  
to the incoming water connection point using copper pipe (or order the 1/2” ID flexible hose  
kit offered by Jackson). The water supply line is to be capable of 20 5 PSI “flow” pressure  
at the recommended temperature indicated on the data plate. See “Shock Absorber” section.  
Back of Machine Showing Drain Hose  
WATER SUPPLY CONNECTION FOR MACHINES WITH A WATER HARDNESS OF 5 GPG  
OR LESS:Ensure that you have read the section entitled “PLUMBING THE DISHMACHINE”  
above before proceeding. Install the water supply line (1/2” ID pipe size minimum) to the  
dishmachine incoming water connection point using copper pipe (or order the 1/2” ID flexi-  
ble hose kit offered by Jackson). It is recommended that a water shut-off valve be installed  
in the water line between the main supply and the machine to allow access for service. The  
water supply line is to be capable of 20 5 PSI “flow” pressure at the recommended tem-  
perature indicated on the data plate.  
Back of unit showing  
Incoming Plumbing Water Connection  
PRESSURE REGULATOR: Jackson has provided a water pressure regulator due to areas where the water pressure fluctu-  
ates or is lower than the recommended pressure. In some cases, you many not need the regulator and in those cases, the reg-  
ulator may be removed. Do not confuse static pressure with flow pressure. Static pressure is the line pressure in a “no flow”  
condition (all valves and services are closed). Flow pressure is the pressure in the fill line when the fill valve is opened during  
the cycle.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
ELECTRICAL INSTALLATION INSTRUCTIONS  
SHOCK ABSORBER: It is also recommended that a shock absorber (not supplied) be installed in the incoming water line. This  
prevents line hammer (hydraulic shock), induced by the solenoid valve as it operates, from causing damage to the equipment.  
CONNECTING THE DRAIN LINE: The dishmachine has a pumped (pressure) drain capable of pumping waste water to a  
height of 24 inches from the floor to the kitchen’s drain system. Each dishmachine is supplied with a 10 foot long hose. This  
ships inside the unit. When installed, it will extend from the rear side of the machine. There must also be an air gap between  
the machine drain line and the floor sink or drain. If a grease trap is required by code, it should have a flow capacity of 12 gal-  
lons per minute.  
PLUMBING CHECK: Slowly turn on the water supply to the machine after the incoming fill line and the drain line have been  
installed. Check for any leaks and repair as required. All leaks must be repaired prior to placing the machine in operation.  
ELECTRICAL POWER CONNECTION: Electrical and grounding connections must comply with the applicable  
Ground Lug  
portions of the National Electrical Code ANSI/NFPA 70 (latest edition) and/or  
other electrical codes.  
Terminal Block  
Disconnect electrical power supply and place a tag at the disconnect switch to  
indicate that you are working on the circuit.  
The data plate is located toward the right front side of the dishmachine. Refer  
to the data plate for machine operating requirements, machine voltage, total  
amperage load and serial number.  
To install the incoming power lines, remove the back panel. This will require  
taking a phillips head screwdriver and removing the two screws at the bottom  
of the back panel; remove the back panel and set out of the way. Install 3/4”  
conduit into the pre-punched holes in the back of the control box. Route power  
wires and connect to power block and grounding lug. Install the service wires  
(L1 and L2) to the appropriate terminals as they are marked on the terminal  
block. Install the grounding wire into the lug provided. It is recommended that  
“DE-OX” or another similar anti-oxidation agent be used on all power connec-  
tions.  
Back of unit showing Terminal Block Box  
Electrical Connection  
VOLTAGE CHECK: Ensure that the power switch is in the OFF position and apply power to the dishmachine. Check the incom-  
ing power at the terminal block and ensure it corresponds to the voltage listed on the data plate. If not, contact a qualified ser-  
vice agency to examine the problem. Do not run the dishmachine if the voltage is too high or too low. Shut off the service break-  
er and mark it as being for the dishmachine. Advise all proper personnel of any problems and of the location of the service  
breaker. Replace the control box cover and tighten down the screws.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
CHEMICAL DISPENSING EQUIPMENT  
WARNING: CHLORINE-BASED SANITIZERS CAN BE DETRIMENTAL TO YOUR MACHINE IF THE CHEMICAL  
SOLUTION IS TOO STRONG. SEE YOUR CHEMICAL PROFESSIONAL TO ENSURE YOUR DISPENSER IS SET UP  
CORRECTLY.  
This equipment is not recommend for use with deionized water or other aggressive fluids. Use of deionized water or  
other aggressive fluids will result in corrosion and failure of materials and components. Use of deionized water or  
other aggressive fluids will void the manufacturer's warranty.  
TO PREPARE CHEMICAL FEEDER PUMPS FOR OPERATION  
The Avenger™HT dishmachine is supplied with integral detergent and rinse aid chemical feeder pumps. The Avenger™LT dish-  
machine is supplied with integral detergent, rinse additive and sanitizer chemical feeder pumps. Locate the open ends of the  
chemical tubes with the tube stiffeners and place each one in the appropriate container.  
A. Red Tubing = Detergent  
B. Blue Tubing = Rinse Aid  
C. White Tubing = Sanitizer  
PRIMING CHEMICAL FEEDER PUMPS  
Chemical feeder pumps need priming when the machine is first installed or if for some reason the chemical lines have been  
removed and air is allowed to enter.  
CAUTION: Water must be in the sump and wash tank prior to the dispensing of chemicals. Sanitizer in concentration is  
caustic and may cause damage without dilution.  
1. Verify that the proper chemical tube stiffener inlet is in the proper container.  
2. Use the prime switches located on the control panel at the bottom of the unit to prime each pump. The switches are clear-  
ly marked as to what chemical feeder pump they are assigned to.  
3. To prime the pumps, hold the switch in the momentary position until chemical can be observed entering the sump.  
4. Detergent is dispensed as required during the wash cycle by the cam timer. The amount of detergent may need to be  
increased or decreased depending on water quality and type of detergent.  
5. Rinse additive is dispensed as required into the final rinse. The amount of rinse aid may need to be adjusted depending on  
water hardness and results.  
6. Sanitizer (either chlorine or iodine) is dispensed into the final rinse. The amount of sanitizer may need to be adjusted  
depending on the concentration and type of sanitizer used.  
7. Please refer to the next page for instruction on adjusting the chemical feeder pumps on the universal timer.  
WARNING: Some of the chemicals used in dishwashing may cause chemical burns if they come in contact with  
your skin. Wear protective gear when handling these chemicals. If you do come in contact with these chemi-  
cals, immediately flush the affected area with fresh water.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
PROGRAMMING INSTRUCTIONS FOR CHEMICAL FEEDER PUMPS (FOR INSTALLATION TECHNICIAN ONLY)  
To access the programming mode, the machine must be ON, and idle (between cycles).  
On the timer board, press and hold both the MOVE and ENTER buttons on the timer board simultaneously for two seconds.  
The PROGRAM (PGM) light and light A will illuminate.  
Note: Once in the programming mode, the MOVE button is used to scroll between the programming categories and the ENTER  
button is used to select the category.  
Press the MOVE button to move the solid light to the desired location of FILL, RINSE AID, DETERGENT or SANITIZER. Please  
note that options A, B, C, and D are not adjustable outputs.  
Press the ENTER button for the chosen category. Now, the (PGM) light will illuminate along with lights corresponding to the  
time values for the chosen category. The ACCEPT light will blink.  
The PROGRAM light will illuminate.  
To change the value of a parameter, use the MOVE button to illuminate the light next to the time option (time is in seconds). In  
the time categories, each second in use will light up. To deselect the option, press ENTER and the light will go off, press ENTER  
again and it will illuminate. Once you have set your time category, press the MOVE button until the ACCEPT light illuminates  
and press ENTER. This will save the changed parameters.  
Once you press the ENTER button when the ACCEPT light is blinking you will exit the programming mode. To change any other  
values, you will have to return to the programming mode. To revert back to a previous setting, you must return to that option  
and change the parameter back to the previous setting.  
Once in the programming mode, if there have been no keypad inputs for approximately 2 minutes, the system will automati-  
cally exit out of the programming mode. Any changes to parameters will be saved when the programming mode is automati-  
cally exited.  
The wash and drain settings are not adjustable.  
All time adjustments are in seconds. Refer to the chart below for the adjustable outputs.  
Timer Programming Board  
Time in seconds.  
`
Avenger™HT  
Not adjustable  
Rinse  
Avenger™LT  
Rinse Aid  
Fill  
Detergent  
Rinse Aid  
Sanitizer  
Detergent  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
DETERGENT CONTROL  
Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate.  
Using detergent in the proper amount can become, in time, a source of substantial savings. A qualified water treatment spe-  
cialist can tell you what is needed for maximum efficiency from your detergent, but you should still know some basics so you’ll  
understand what they are talking about.  
First, you must understand that hard water greatly effects the performance of the dishmachine. Water hardness is the amount  
of dissolved calcium and magnesium in the water supply. The more dissolved solids in the water, the greater the water hard-  
ness. Hard water works against detergent, thereby causing the amount of detergent required for washing to increase. As you  
use more detergent, your costs for operating the dishmachine will increase and the results will decrease. The solids in hard  
water also may build-up as a scale on wash and rinse heaters, decreasing their ability to heat water. Water temperature is  
important in removing soil and sanitizing dishes. If the water cannot get hot enough, your results may not be satisfactory. This  
is why Jackson recommends that if you have installed the machine in an area with hard water, that you also install some type  
of water treatment equipment to help remove the dissolved solids from the water before it gets to the dishmachine.  
Second, hard water may have you adding drying agents to your operating cycle to prevent spotting, when the real problem is  
deposited solids on your ware. As the water evaporates off of the ware, the solids will be left behind to form the spotting and  
no amount of drying agent will prevent this. Again, using treated water will undoubtedly reduce the occurrences of this prob-  
lem.  
Third, treated water may not be suitable for use in other areas of your operation. For instance, coffee made with soft water may  
have an acid or bitter flavor. It may only be feasible to install a small treatment unit for the water going into the dishmachine  
itself. Discuss this option with your qualified water treatment specialist.  
Even after the water hardness problems have been solved, there still must be proper training of dishmachine operators in how  
much detergent is to be used per cycle. Talk with your water treatment specialist and detergent vendor and come up with a  
complete training program for operators. Using too much detergent has as detrimental effects as using too little. The proper  
amount of detergent must be used for job. It is important to remember that certain menu items may require extra detergent by  
their nature and personnel need to be made aware of this. Experience in using the dishmachine under a variety of conditions,  
along with good training in the operation of the machine, can go a long way in ensuring your dishmachine operates as effi-  
ciently as possible.  
Certain dishmachine models require that chemicals be provided for proper operation and sanitization. Some models even  
require the installation of third-party chemical feeders to introduce those chemicals to the machine. Jackson does not recom-  
mend or endorse any brand name of chemicals or chemical dispensing equipment. Contact your local chemical distributor for  
questions concerning these subjects.  
Some dishmachines come equipped with integral solid detergent dispensers. These dispensers are designed to accommodate  
detergents in a certain sized container. If you have such a unit, remember to explain this to your chemical distributor upon first  
contacting them.  
As explained before, water temperature is an important factor in ensuring that your dishmachine functions properly. The data  
plate located on each unit details what the minimum temperatures must be for either the incoming water supply, the wash tank  
and the rinse tank, depending on what model of dishmachine you have installed. These temperatures may also be followed by  
temperatures that Jackson recommends to ensure the highest performance from you dishmachine. However, if the minimum  
requirements are not met, the chances are your dishes will not be clean or sanitized. Remember, a dish can look clean, but it  
may not be sanitized. Instruct your dishmachine operators to observe the required temperatures and to report when they fall  
below the minimum allowed. A loss of temperature can indicate a much larger problem such as a failed heater or it could also  
indicate that the hot water heater for your operation is not up to capacity and a larger one may need to be installed.  
There are several factors to consider when installing your dishmachine to ensure that you get the best possible results from it  
and that it operates at peak efficiency for many years. Discuss your concerns with your local chemical distributor and water  
treatment specialist before there is a problem.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
OPERATION INSTRUCTIONS  
PREPARATION: Before proceeding with the start-up of the unit, verify the following:  
1. The strainer is in place and is clean.  
2. That the wash and rinse arms are screwed securely into place and that their endcaps are tight. The wash and rinse arms  
should rotate freely.  
3. Verify all chemical levels for machine chemical feeder pumps are correct.  
POWER UP: To energize the unit, turn on the power at the service breaker. The voltage should have been previously verified  
as being correct. If not, the voltage will have to be verified.  
FILLING THE WASH TUB: For the initial fill, close the door and ensure that the MANUAL switch light is not on. Depress and  
hold the START CYCLE switch until the auto light comes on and then release the button. For the initial fill, run the machine  
through 3 cycles to fill the tub sump. The machine will run a partial cycle and fill to the bottom of the pan strainer. Open the  
door and verify that the water level is correct.  
NOTE: For the Avenger™HT: Ensure the orange/white wires at the heater contactor are connected properly. They  
have been purposely disconnected at the factory to avoid damage to the heater element when there is no water  
in the booster heater.  
Hereafter, the water level is controlled by the timer that has been preset at the factory. Verify that there are no other leaks on  
the unit before proceeding any further. The wash sump must be completely filled before operating the wash pump to prevent  
damage to the component. Once the wash tub is filled, the unit is ready for operation.  
The machine runs a complete cycle to drain and fill. If the machine is not allowed to drain, the water will build up inside the tub.  
After the initial fill, the rinse water for the current cycle will become the wash water for the next cycle.  
WARE PREPARATION: Proper preparation of ware will help ensure good results and less re-washes. If not done properly, ware  
may not come out clean and the efficiency of the dishmachine will be reduced. It is important to remember that a dishmachine  
is not a garbage disposal and that simply throwing unscraped dishes into the machine simply defeats the purpose altogether  
of washing the ware. Scraps should be removed from ware prior to being loaded into a rack. Pre-rinsing and pre-soaking are  
good ideas, especially for silverware and casserole dishes. Place cups and glasses upside down in racks so that they do not  
hold water during the cycle. The dishmachine is meant not only to clean, but to sanitize as well, to destroy all of the bacteria  
that could be harmful to human beings. In order to do this, ware must be properly prepared prior to being placed in the machine.  
DAILY MACHINE PREPARATION: Refer to the section entitled “PREPARATION” at the top of this page and follow the instruc-  
tions there. Afterwards, check that all of the chemical levels are correct and/or that there is plenty of detergent available for the  
expected workload.  
WARM-UP CYCLES: For a typical daily start-up, it is recommended to run the machine through 3 cycles to ensure that all of  
the cold water is out of the system and to verify that the unit is operating correctly. To cycle the machine, ensure that the power  
is on and that the tub has filled to the correct level.  
Push the START CYCLE button and hold until the green cycle light is on and then release, the unit will start, run through the  
cycle, and shut off automatically. Repeat this two more times. The unit should now be ready to proceed with the washing of  
ware.  
WASHING A RACK OF WARE: To wash a rack, open the door completely and slide the rack into the unit. Close the door, press  
the START CYCLE button and hold until the green cycle light is on and release, the unit will start. Once the cycle is complet-  
ed, open the door and remove the rack of clean ware. Replace with a rack of soiled ware and close the door. The process will  
then repeat itself.  
OPERATIONAL INSPECTION: Based upon usage, the pan strainer may become clogged with soil and debris as the workday  
progresses. Operators should regularly inspect the pan strainer to ensure it has not become clogged. If the strainer does, it will  
reduce the washing capability of the machine. Instruct operators to clean out the pan strainer at regular intervals or as required  
by work load.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS  
OPERATION INSTRUCTIONS (CONTINUED)/DELIMING INSTRUCTIONS  
SHUTDOWN AND CLEANING: At the end of the workday, close the door. Start a cycle. Wait approximately five seconds after  
the green cycle light comes on and then push the POWER OFF switch. This will put the machine in shutdown mode which will  
let the machine drain completely prior to shutting off. Once the wash tub is drained and power light is off, remove he pan strain-  
er. Remove soil and debris from the strainer and set to the side. Unscrew the wash and rinse arms from their manifolds.  
Remove the endcaps and flush the arms with water. Use a brush to clean out the inside of the arms. If the nozzles appear to  
be clogged, use a toothpick to remove the obstruction. Wipe the inside of the unit out, removing all soil and scraps. Reassemble  
the wash and rinse arms and replace them in the unit. The arms only need to be hand tight, do not use tools to tighten them  
down. Reinstall the strainer and close the door.  
DELIMING OPERATIONS: In order to maintain the dishmachine at its optimum performance level, it will be required to remove  
lime and corrosion deposits on a frequent basis. A deliming solution should be available from your detergent supplier. Read and  
follow all instructions on the label of the deliming solution.  
NOTE: If this machine is equipped with a HTS-11, scale prevention and corrosion control device, and lime is becoming a fre-  
quent problem, the cartridge needs to be replaced. To order a replacement cartridge, call Jackson immediately to have one  
shipped to you.  
To proceed with the deliming operation, fill the dishmachine and add the correct amount of deliming solution as recommended  
by the deliming solution manufacturer. The water capacity of the tank can be verified on the specification sheet(s) of this man-  
ual.  
Perform the following operations to delime the dishmachine:  
1. Push Manual Switch on the front of the control panel.  
2.Close the door (after adding the deliming solution).  
3. Run the machine for the recommended period of time.  
4. Press the Power Switch to turn the unit off and open the door.  
5. Wait five minutes, then inspect the inside of the machine. If the machine is not delimed, run another time cycle as per the  
deliming solution’s instructions.  
6. When clean, drain and re-fill the machine.  
7. Run in MANUAL for 10 minutes to remove residual deliming solution.  
8. Drain and re-fill the machine.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 3:  
PREVENTATIVE MAINTENANCE  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 3: PREVENTATIVE MAINTENANCE  
PREVENTATIVE MAINTENANCE  
The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However,  
this does not mean that some items will not wear out in time. Jackson highly recommends that any maintenance and repairs  
not specifically discussed in this manual should be performed by QUALIFIED SERVICE PERSONNEL ONLY. Performing main-  
tenance on your dishmachine may void your warranty if it is still in effect.  
There are many things that operators can do to prevent catastrophic damage to the dishmachine. One of the major causes of  
component failure has to do with prescrapping procedures. A dishmachine is not a garbage disposal; any large pieces of mate-  
rial that are put into the machine shall remain in the machine until they are either broken up (after spreading out on your ware!)  
or physically removed. Strainers are installed to help catch debris, but they do no good if they are clogged. Have operators reg-  
ularly inspect the pan strainers to ensure (1) that they are free of soil and debris and (2) they are laying flat in the tub.  
When cleaning out strainers, do NOT beat them on waste cans. The strainers are made of metal and can be forgiving; but once  
severe damage is done, it is next to impossible for the strainer to work in the way it was designed to. Wipe out strainers with  
a rag and rinse under a faucet if necessary. For stubborn debris, a toothpick should be able to dislodge any obstructions from  
the perforations. Always ensure that strainers are placed back in the machine before operation and that they lay flat in the tub.  
You may wish to also refer to the page entitled “Detergent Control” in order to learn more about how your water hardness will  
effect the performance of your machine. Hard water makes dishmachines work harder and decreases efficiency.  
Again, it is important to remind operators that trying to perform corrective maintenance on the dishmachine could lead to larg-  
er problems or even cause harm to the operator. If a problem is discovered; secure the dishmachine using proper shut down  
procedures as listed in this manual and contact a QUALIFIED SERVICE AGENCY.  
Some problems, however, may having nothing to do with the machine itself and no amount of preventative maintenence is  
going to help. A common problem has to do with temperatures being too low. Verify that the water temperatures coming to your  
dishmachine match the requirements listed on the machine data plate. There can be a variety of reasons why your water tem-  
perature could be too low and you should discuss it with a QUALIFIED SERVICE AGENCY to determine what can be done.  
By following the operating and cleaning instructions in this manual, you should get the most efficient results from your machine.  
As a reminder, here are some steps to take to ensure that you are using the dishmachine the way it was designed to work:  
1. Ensure that the water temperatures match those listed on the machine data plate.  
2. Ensure that all strainers are in place before operating the machine.  
3. Ensure that all wash and/or rinse arms are secure in the machine before operating.  
4. Ensure that drains are closed/sealed before operating.  
5. Remove as much soil from dishes by hand as possible before loading into racks.  
6. Do not overfill racks.  
7. Ensure that glasses are placed upside down in the rack.  
8. Ensure that all chemicals being injected to machine have been verified as being at the correct concentrations.  
9. Clean out the machine at the end of every workday as per the instructions in the manual.  
10. Always contact a QUALIFIED SERVICE AGENCY whenever a serious problem arises.  
11. Follow all safety procedures, whether listed in this manual or put forth by local, state or national codes/regulations.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 4:  
TROUBLESHOOTING  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 4: TROUBLESHOOTING SECTION  
COMMON PROBLEMS  
WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per-  
sonnel. Certain procedures in this section require electrical tests or measurements while power is applied to the  
machine. Exercise extreme caution at all times. If test points are not easily accessible, disconnect power, attach test  
equipment and reapply power to test. When replacing electrical parts, disconnect power at source circuit breaker.  
Problem: Water overflow from bottom of door.  
1. Clogged drain. Remove obstruction.  
2. Machine not level. Level machine, or increase height to the front.  
3. Excessive inlet pressure. Install pressure reducing valve, or adjust if one is present. Ensure flow is 20 5 PSI.  
4. Detergent foaming. Reduce detergent quantity.  
Problem: Wash motor doesn’t operate on manual wash.  
1. Loose or broken wires. Reconnect or replace wires in motor.  
2. Defective manual wash switch. Replace.  
3. Defective motor starting relay. Replace.  
Problem: Motor operates on manual wash but not on automatic.  
1. Defective circuit in manual wash switch. Replace switch.  
Problem: No water comes through the rinse arms when the “ON/FILL” switch is depressed.  
1. Water not turned on. Turn water on.  
2. Defective solenoid valve. Replace solenoid valve.  
Problem: Little or no water coming through the rinse assemblies.  
1. Limed up rinse heads or piping. Delime rinse heads.  
2. Low water pressure. Increase pipe size to machine. Adjust pressure regulator.  
Problem: Rinse water runs continuously with breaker turned off.  
1. Defective plunger in solenoid valve. Replace.  
2. Defective diaphragm in solenoid valve. Replace diaphragm.  
Problem: Wash temperature not at required reading on thermometer.  
1. Check that orange/white wires are connected. See note on page 12.  
2. Defective thermometer. Replace.  
3. Defective thermostat. Adjust thermostat. Replace thermostat.  
4. Rinse heater defective. Replace heater element.  
5. Defective heater contactor R1. Replace.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 4: TROUBLESHOOTING SECTION  
COMMON PROBLEMS  
WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per-  
sonnel. Certain procedures in this section require electrical tests or measurements while power is applied to the  
machine. Exercise extreme caution at all times. If test points are not easily accessible, disconnect power, attach test  
equipment and reapply power to test. When replacing electrical parts, disconnect power at source circuit breaker.  
Problem: Rinse water not at required temperature range.  
1. Check that orange/white wires are connected. See note in installation instructions.  
2. Thermometer is defective. Replace.  
3. Thermostat is defective. Adjust the thermostat. Replace if necessary.  
4. Incoming rinse water does not meet minimum criteria indicated on machine data plate. Adjust as required.  
Problem: Machine doesn’t drain when “OFF/DRAIN” switch is pressed.  
1. Drain solenoid clogged. Remove obstruction.  
2. Defective motor or motor start relay. Replace.  
3. Defective drain valve. Replace.  
Problem: No indication of pressure.  
1. Water turned off. Turn water on.  
2. Pressure gauge defective. Replace pressure gauge.  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5:  
PARTS SECTION  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CONTROL PANEL WELDMENT ASSEMBLIES  
Avenger™HT Complete Control Panel Assembly  
Bushing, Snap  
Complete Control Panel  
Weldment Assembly  
Avenger™HT  
05975-003-35-21  
Screw, 10-32 x 1”  
(4 per Asm)  
Relay, 240V  
05945-111-89-75  
05700-003-31-47  
05305-002-19-42  
Screw, 6-32 x 3/8  
05305-002-25-91  
Control Panel Weldment  
05700-003-31-48  
Locknut, 10-24 w/  
Nylon Insert  
P Clamp 1/4”  
05975-002-61-42  
(1 per Asm)  
Locknut, 6-32 w/ Nylon  
Insert  
05310-373-01-00  
05310-373-03-00  
Screw, 10-32 x 3/8”  
05305-173-12-00  
Timer Mounting  
Bracket,  
Avenger™HT Only  
05700-003-36-05  
Universal Timer  
05945-003-33-09  
Contactor, 240V  
(2 per Avenger™HT Asm.)  
05945-002-74-20  
Avenger™LT Complete Control Panel Assembly  
Complete Control Panel  
Weldment Assembly  
Avenger™LT  
Relay, 115V  
05945-002-47-41  
05700-003-34-63  
Control Panel Weldment  
05700-003-36-44  
Unless specified here,  
other components are the  
same as above.  
Universal Timer  
05945-003-33-09  
Control Panel Weldment  
05700-003-36-44  
Contactor, 110V  
(1 per Avenger™LT Asm.)  
05945-109-05-69  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CONTROL PANEL ASSEMBLY/KICK PANEL WELDMENT - AVENGER™HT  
8
9
11  
10  
7
12  
Complete Control Panel  
Assembly  
To order the wire harness use  
number: 05999-003-34-61.  
05700-003-31-64  
6
2
3
4
5
1
ITEM  
QTY  
1
DESCRIPTION  
Mfg. No.  
1
Control Panel  
09330-003-31-66  
09905-003-31-65  
05310-374-01-00  
06685-111-68-48  
05945-111-44-44  
06685-111-68-49  
05945-111-44-45  
05975-003-31-72  
05930-011-49-54  
05930-011-49-54  
05945-111-44-43  
05930-301-49-00  
06680-011-86-42  
04730-003-33-02  
04730-003-33-39  
05930-011-49-55  
1
Decal, Control Panel  
6
Locknut, 1/4”-20 S/S Hex w/Nylon Insert  
Thermometer, 48” Rinse  
Light, Amber  
2
1
3
1
4
1
Thermometer, 96” Wash  
Light, Red  
5
1
6
1
Window Plug  
7
1
Switch, Rinse Aid  
8
1
Switch, Detergent  
9
1
Light, Green  
10  
11  
1
Switch, On-Off  
1
Gauge, 0-100 PSI with Green Zone  
Bell Adapter, 1/4FNPT x 1/8 FNPT  
Hose, Pressure Gauge  
Switch, Auto-Manual  
1
1
12  
1
Kick Plate Weldment  
05700-003-32-91  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CONTROL PANEL ASSEMBLY/KICK PANEL WELDMENT - AVENGER™LT  
Complete Control  
Panel Assembly  
05700-003-34-23  
9
8
7
10  
To order the wire harness use  
number: 05999-003-34-62.  
D - Detergent  
S - Sanitizer  
R - Rinse Aid  
D
S
R
3
5
2
4
6
1
ITEM  
QTY  
1
DESCRIPTION  
Control Panel  
Mfg. No.  
1
09330-041-73-90  
1
Decal, Control Panel  
09905-031-73-95  
05310-374-01-00  
06685-111-68-48  
05700-011-80-40  
09905-011-49-52  
05310-373-03-00  
05945-111-44-45  
05945-111-44-44  
05945-111-44-43  
05990-111-35-38  
05305-002-32-38  
05930-301-49-00  
05930-011-49-55  
05930-011-49-54  
6
Locknut, 1/4”-20 S/S Hex w/Nylon Insert  
Thermometer, 48” Rinse  
Plate, Switch Mounting  
Decal, Prime Switch  
Locknut, 6-32 Hex w/Nylon Insert  
Light, Red  
2
3
1
1
1
4
4
5
6
7
1
1
Light, Amber  
1
Light, Green  
1
Counter, 115V  
2
Screw, 4-40 x 1/4” Phillips Pan Head  
Switch, Auto-Manual  
Switch, On-Off  
8
9
10  
1
1
3
Switch, Peripump  
Kick Plate Weldment  
05700-003-32-94  
Window, Peripump  
05700-003-33-35  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
TERMINAL BLOCK BOX ASSEMBLY  
Terminal Block Track  
05700-000-43-60  
Decal, Power Connections  
09905-011-47-35  
Locknut, 10-24 S/S Hex w/  
Nylon Insert  
05310-373-01-00  
Terminal Block  
(2 Per)  
05940-500-02-19  
Terminal Block Box  
05700-003-27-69  
Terminal Block Box Cover  
(Not Shown)  
05700-003-27-70  
Screw, 10-32 x 1/2”  
05305-011-39-36  
Ground Lug  
05940-200-76-00  
Decal, Copper Conductors  
09905-011-62-72  
Screw, 10-32 x 1/2”  
05305-011-39-36  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CHEMICAL FEEDER PUMP ASSEMBLY - AVENGER™HT  
Complete Chemical Feeder Pump Assembly  
05700-003-32-03  
15, 16  
1
2
4
5
3
See page 39 for indi-  
vidual peri pump com-  
ponents.  
D
C
B
A
A B  
D
A B C D  
A B C D  
6
10  
11  
13  
7
12  
8
9
14  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CHEMICAL FEEDER PUMP ASSEMBLY - AVENGER™HT (CONTINUED)  
ITEM  
1
QTY  
1
DESCRIPTION  
Mfg. No.  
Peri Pump Plate Weldment  
Detergent Feeder Pump, (Red Roller) 36RPM, 240V  
Rinse Aid Feeder Pump, (Black Roller), 14RPM, 240V  
Nylon Loop Strap  
05700-003-33-48  
05700-002-72-49  
05700-002-72-48  
04320-002-71-22  
05310-373-03-00  
05700-003-33-59  
05700-003-22-89  
05700-003-33-58  
05700-003-33-57  
05700-003-33-61  
05700-003-33-60  
05700-003-33-63  
05700-001-86-78  
05700-002-66-49  
05700-003-36-24  
05305-173-12-00  
2
1
3
1
4
2
5
2
Locknut, 6-32 W/Nylon Insert  
Red Tube 1/4” x 14 1/2”  
Tube, Tygoprene 3/16” x 8”  
Red Tube 1/4” x 72”  
6
1
7
1
8
1
9
1
Red Tube 1/4” x 120”  
10  
11  
12  
13  
14  
15  
16  
1
1/8” x 120” Clear Tube  
1
1/8” x 93” Clear Tube  
1
12” Long Black Sleeve  
1
Blue Tube 1/4” x 22”  
2
Chemical Tube Stiffener  
Stop Bracket  
1
2
Screw, 10-32 x 3/8”  
Bracket, Track Mounting  
05700-003-33-52  
Complete Avenger™HT Peripump  
Track Assembly  
05700-003-33-46  
Screw, 10-32 x 5/8” Truss Head  
(4 per Asm.)  
05305-003-02-12  
Track, Peripump (2 per Asm.)  
05700-003-33-44  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CHEMICAL FEEDER PUMP ASSEMBLY - AVENGER™LT  
Complete Chemical  
Feeder Pump Assembly  
05700-003-33-32  
3
2
1
4
5
6
4
7
8
9
See page 39 for individual  
peri pump components.  
10  
11  
18  
17  
19  
15  
16  
15  
12  
20  
13, 14  
15  
16  
15  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CHEMICAL FEEDER PUMP ASSEMBLY - AVENGER™LT (CONTINUED)  
ITEM  
1
QTY  
1
DESCRIPTION  
Mfg. No.  
Peri Pump Plate Weldment  
Motor, 14 RPM 115V  
Motor, 36 RPM 115V  
Peri Pump Kit (Red Roller)  
White Tube 1/4” x 16”  
White Tube 1/4” x 100”  
Red Tube 1/4” x 8”  
05700-002-84-23  
04320-111-35-13  
04320-111-35-14  
04320-121-37-10  
05700-003-20-64  
05700-003-20-67  
05700-003-20-65  
05700-003-03-45  
04320-002-83-90  
05700-003-20-66  
05700-003-20-68  
05700-003-20-69  
04320-002-71-22  
05310-373-03-00  
05700-111-35-33  
05700-002-44-33  
05700-002-62-11  
05700-002-62-12  
05700-002-62-13  
05700-002-66-49  
2
1
3
2
4
2
5
1
6
1
7
1
8
1
Red Tube 1/4” x 100”  
Peri Pump Kit (White Roller)  
Blue Tube 1/4” x 4”  
Blue Tube 1/4” x 100”  
5/16” x 5” Clear Tube  
Nylon Loop Strap  
Locknut, 6-32 W/Nylon Insert  
Tube, 3/16” ID x 2” Long  
Tube, 3/16” ID x 1.6” Long  
Blue Tube 1/4” x 48”  
9
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
1
1
3
6
6
4
2
1
1
Red Tube 1/4” x 48”  
White Tube 1/4” x 48”  
Chemical Tube Stiffener  
1
3
Complete Avenger™LT Peripump  
Track Assembly  
Bracket, Track Mounting  
05700-003-33-30  
05700-003-33-31  
Track, Peripump (2 per Asm.)  
05700-003-33-29  
Screw, 10-32 x 5/8” Truss Head  
(6 per Asm.)  
05305-003-02-12  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CHEMICAL FEEDER PUMP COMPONENTS  
Rear Housing  
04320-111-37-09  
Screw, 8-32 x 3/8” Phillips Pan Head  
Screw, 8-32 x 1/2” Phillips Flat Head  
2 per  
2 per  
05305-011-37-07  
05305-011-37-06  
Screw, 6-32 x 3/4” Phillips Pan Head  
4 per  
05305-011-37-05  
Front Housing  
04320-111-37-08  
Motor, 14 RPM 115V  
Rinse Aid Feeder Pump  
04320-111-35-13  
Motor, 14 RPM 240V  
Rinse Aid Feeder Pump  
04320-111-47-46  
Motor, 36 RPM 115V  
Detergent/Sanitizer Feeder Pump  
04320-111-35-14  
Squeeze Tube, Detergent/Sanitizer  
(Use with the red roller.)  
05700-111-35-29  
Motor, 36 RPM 240V  
Detergent/Sanitizer Feeder Pump  
04320-111-47-47  
Roller, Red  
04320-111-36-70  
Clear Squeeze Tube, Rinse Aid  
(Use with the black roller.)  
05700-011-76-41  
Roller, Black  
04320-111-65-27  
Roller, White  
04320-111-65-27  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PLUMBING ASSEMBLIES - AVENGER™HT  
Plug, 1/4” Brass  
2 per machine  
04730-209-01-00  
Valve, Check  
04820-111-51-14  
Vacuum Plumbing Assembly  
05700-003-32-14  
Injector Weldment  
05700-031-41-83  
Fitting, Outlet Elbow  
04820-111-51-18  
Injector Assembly  
05700-003-22-01  
Nut, P/P for 1/8” Tubing  
04730-011-59-45  
Vacuum Breaker  
04820-003-06-13  
Bushing, 1/4 x 1/8 SS  
(Not Shown)  
04730-003-05-61  
Vacuum Breaker  
Tubing Assembly  
05700-003-32-15  
Connects to  
Rinse Injector  
Clamp, Hose  
04730-719-06-09  
Connects to  
Rinse Stiffener  
Injector Hose, 3/4” x 7 1/2 ”  
05700-003-33-49  
Injector Hose Spring  
05340-003-33-50  
Rinse Stiffener  
(Not replaceable,  
part of the tub  
weldment)  
Locknut, 1/4”-20 S/S  
Hex with Nylon Insert  
05310-374-01-00  
Complete Incoming Plumbing Assembly  
05700-003-36-32  
Rinse Hub Weldment  
05700-021-38-31  
Incoming Plumbing  
Assembly  
05700-003-32-17  
Valve, Solenoid 1/2” 220 volt  
04810-100-09-18  
Inlet Booster Valve  
Plumbing  
05700-003-33-98  
Regulator  
04820-100-04-07  
Clamp, Pipe  
Inlet Hook-Up Plumbing  
05700-003-33-99  
Clamp, Pipe  
05700-011-38-62  
2 per assembly  
05700-000-35-05  
Locknut, 1/4”-20 S/S  
Hex with Nylon Insert  
05310-374-01-00  
Inlet Booster Plumbing  
05700-003-33-97  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: 08-07-2007  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PLUMBING ASSEMBLIES - AVENGER™LT  
Connects to  
45 Deg. Elbow  
Plate, Rinse Weldment  
Gasket, Rinse  
05330-111-42-81  
Injector Hose, 3/4” x 11”  
05700-003-29-68  
05700-011-82-73  
Clamp, Hose  
04730-719-06-09  
Locknut, 1/4”-20 S/S Hex w/Nylon Insert  
05310-374-01-00  
Plate, Deflector  
05700-002-62-49  
Complete Incoming  
Plumbing Assembly  
05700-003-34-67  
Plate, Rinse  
05700-011-82-86  
Vacuum Breaker  
04820-003-06-13  
Rinse Stiffener Weldment  
05700-031-52-82  
Elbow, 45 Deg.  
1/2” NPT x 3/4” Hose  
04730-003-29-22  
Gasket, Rinse  
05330-111-42-81  
Locknut, 1/4”-20 S/S  
Hex w/Nylon Insert  
05310-374-01-00  
Vacuum Breaker Tubing  
Assembly  
05700-003-34-36  
Incoming Plumbing Assembly  
05700-003-34-66  
Clamp Pipe  
05700-011-38-62  
Locknut, 1/4”-20 S/S  
Hex w/Nylon Insert  
05310-374-01-00  
Valve, Solenoid 1/2" 110 Volt  
04810-100-12-18  
Y-Strainer  
04730-217-01-10  
Clamp Pipe  
2 per assembly  
05700-000-35-05  
Locknut, 1/4”-20 S/S  
Hex w/Nylon Insert  
05310-374-01-00  
Incoming Connection Plumbing  
05700-003-34-65  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RINSE SOLENOID VALVE & VACUUM BREAKER REPAIR PARTS KITS/WATER HAMMER ARRESTOR KIT OPTION  
Screw  
Data Plate  
Cap Screw  
Coil & Housing  
Data Plate  
Valve Bonnet  
Spring & Plunger Kit  
06401-003-07-40  
Cap  
Spring position is moved  
for clarity.  
Goes below the plunger.  
Cap Retainer  
O-Ring & Diaphragm  
06401-003-07-41  
Diaphragm  
Retainer  
O-Ring  
Plunger  
Body  
Components of  
Repair Kit  
06401-003-06-23  
Screen  
Retainer  
Mesh Screen  
Valve Body  
Complete Vacuum Breaker Assembly, 1/2” NPT  
04820-003-06-13  
Complete 110 Volt Solenoid Valve Assembly, 1/2”  
04810-100-12-18  
Water Hammer Arrestor Assembly  
05700-002-64-67  
Coil & Housing only, 1/2”  
06401-003-07-43  
Water Hammer Arrestor,  
1/2" NPT  
06685-100-05-00  
Complete 220 Volt Solenoid Valve Assembly, 1/2”  
04810-100-09-18  
Coil & Housing only, 1/2”  
06401-003-07-44  
Close Nipple, 1/2”  
04730-207-15-00  
Tee, 1/2” x 1/2” x 1/2”  
04730-211-27-00  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
WASH MOTOR/DRAIN PLUMBING/ AVENGER™LT WASH MANIFOLD ASSEMBLY  
18  
17  
Area within this box is an overall  
view of the Avenger™LT wash  
manifold assembly.  
19  
1a  
16  
For the Avenger™LT  
replace item 1 below with  
this manifold.  
1
2
3
4
5
See Motor and Pump  
Assembly Page  
4
14  
4
6
4
7
Ball Valve Assembly  
AVENGER™LT 115V:  
04730-003-34-60  
AVENGER™HT 240V:  
04730-003-33-64  
9
10  
9
9
8
11  
12  
13  
15  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
WASH MOTOR / DRAIN PLUMBING/ AVENGER™LT WASH MANIFOLD ASSEMBLY  
ITEM  
QTY  
1
DESCRIPTION  
Mfg. No.  
1
Hub, Discharge Machined (Avenger™HT Shown)  
Lower Wash Manifold (Avenger™LT)  
Gasket, Manifold  
05700-021-37-90  
05700-021-52-80  
05330-200-23-00  
05700-000-86-23  
04730-719-01-37  
05700-011-44-48  
05700-001-22-92  
05330-003-32-82  
09515-031-39-86  
05311-174-01-00  
05310-374-01-00  
04730-719-06-09  
04720-003-27-95  
04730-011-65-86  
05700-003-31-93  
05700-003-31-74  
05700-011-39-72  
04730-011-65-87  
05330-111-35-15  
05700-002-13-75  
05700-031-34-82  
05700-011-34-63  
05310-374-01-00  
1a  
2
1
1
3
1
Nut, Jam 1 1/2”-12 NPT  
4
4
Hose Clamp, 1 5/16" - 2 1/4", #28  
Hose,1 1/4” x 2 1/4” Reinforced  
Hose, Bottom Manifold Pump  
Gasket, Suction Adapter  
Casting, Suction Adapter  
Washer, S/S 1/4”-20 I.D.  
Locknut, 1/4”-20 S/S  
5
1
6
1
7
1
8
1
2
2
9
3
Clamp, 3/16” to 1 1/2”  
Hose, 8” Straight Drain  
Hosebarb, 1” x 3/4” NPT Polypropylene  
Spacer, Drain Valve  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
1
1
1
1
Bracket, Drain Valve Support  
Hose, 1” I.D. x 10 Feet Long  
Hosebarb, 90° 1” x 3/4” NPT  
O-ring, Manifold  
Tube, Wash Manifold  
Upper Wash Manifold  
1
1
2
1
1
1
Bracket, Manifold Tube Positioning  
Locknut, 1/4”-20 S/S  
1
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MOTOR & PUMP ASSEMBLY  
Complete Pump & Motor Assembly, 60 HZ, With Bracket  
05700-003-31-57  
Complete Pump & Motor Assembly, 60 HZ, No Bracket  
06105-002-72-75  
Pump Only Assembly, 60 HZ  
(Area indicated within box, Casing is included)  
05700-002-79-50  
Motor Only, 60 HZ  
06105-002-79-61  
Hardware:  
Shim Kit  
05700-002-82-58  
Bolt, 3/8”-16 x 1” (2 per)  
05305-276-03-00  
Case Capscrew  
05305-002-81-88  
Lockwasher, 3/8” (2 per)  
05311-276-01-00  
Nut, Hex, 3/8”-16 (2 per)  
05310-276-01-00  
Mechanical Seal, 60 HZ  
05330-002-34-22  
Case O-Ring, 60 HZ  
05330-002-81-83  
Other parts not shown.  
Drain Plug  
04730-002-81-89  
Seal Plate, 60 HZ  
05700-002-81-87  
Impeller Assembly, 60 HZ  
05700-002-81-86  
Mounting Bracket  
05700-003-31-58  
Pump Casing-Stainless Steel, 60 HZ  
05700-002-85-00  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RINSE ARM & WASH ARM ASSEMBLIES  
Plug, Rinse Arm  
04730-609-04-00  
Rinse Arm Assembly  
(AVENGER™HT units only)  
2 per Asm.  
05700-031-39-21  
Rinse Arm  
05700-031-38-30  
Bearing  
03120-002-72-24  
Bushing, Rinse Head  
05700-021-33-84  
Washer, Rinse Arm  
05330-011-42-10  
Ring, Retaining  
05340-112-01-11  
O-ring (Not Shown)  
05330-002-60-69  
Wash Arm Assembly  
2 per Avenger™LT  
1 per Avenger™HT  
05700-021-39-23  
Wash Arm Weldment w/ Plugs  
05700-021-46-58  
Bearing Assembly  
05700-021-35-97  
O-ring (Not Shown)  
05330-002-60-69  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
THERMOSTAT & RINSE TANK ASSEMBLY  
Thermostat  
05930-003-06-48  
Complete Rinse Tank Assembly  
(AVENGER™HT Only)  
05700-003-31-94  
Rinse Tank Weldment  
05700-003-31-95  
Fitting, 1/4” Imperial Brass  
05310-924-02-05  
Locknut, 1/4”-20 S/S  
Hex with Nylon Insert  
05310-374-01-00  
Gasket, Heater  
05330-011-47-79  
Heater  
04540-111-43-21  
Dielectric Cover  
05700-001-40-50  
Nut, 5/16”-18 S/S Hex  
05310-275-01-00  
Lockwasher, 5/16” Split  
05311-275-01-00  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
DOOR ASSEMBLY  
Complete Door Assembly  
05700-003-32-09  
1
3
10  
8
11  
4
19  
18  
17  
12  
9
13  
15  
5
14  
7
16  
2
6
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
DOOR ASSEMBLY (CONTINUED)  
ITEM  
1
QTY  
1
DESCRIPTION  
Mfg. No.  
Outer Door Weldment  
Inner Door  
05700-003-33-37  
05700-003-33-21  
05700-003-26-62  
05305-274-20-00  
05700-003-33-19  
05700-003-33-20  
05700-003-33-22  
05305-011-44-52  
05700-003-33-38  
05700-003-34-80  
05700-003-32-72  
05700-003-32-71  
05305-011-44-50  
05700-003-33-42  
05700-003-32-55  
05305-173-01-00  
05700-011-44-37  
05930-002-68-53  
05310-373-03-00  
2
1
3
1
Door Handle  
4
2
Bolt, 1/4”-20 x 3/8" Long  
Channel, Right Seal  
Channel, Left Seal  
Channel, Top Seal  
5
1
6
1
7
1
8
12  
1
Screw, 10-32 x 1/2” Pan Phillips Head  
Baffle, door  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
1
Start Switch Assembly  
1
Hinge, Right Weldment  
1
Hinge, Left Weldment  
6
Screw, 1/4”-20 x 1-1/2” Flat Phillips Head  
Hinge Spacer  
2
2
Stop, Door Hinge  
2
Screw, No. 10 Pan Head, 18-8 S/S x 1/2”  
Retaining Plate Assembly  
Magnet, Reed Switch  
2
1
2
Locknut, 6-32 S/S Hex with Nylon Insert  
Start Switch & Bracket Asm.  
05700-003-34-87  
Locknut, 6-32  
05310-373-03-00  
Switch, Plunger Style  
05930-003-34-83  
Switch Mount Bracket  
05700-003-34-88  
Switch & Bracket Weldment  
05700-003-34-86  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MISCELLANEOUS DOOR COMPONENTS  
Door Switch & Bracket Assembly  
05700-003-32-21  
Door Switch Bracket  
05700-003-31-43  
Door Switch  
05930-003-31-44  
Switch Mounting Plate  
Assembly  
05700-003-33-54  
Hardware:  
Locknut, 6-32 S/S Hex with Nylon Insert  
05310-373-03-00  
Door Spring  
05700-003-32-85  
Screw, 6-32 x 1/4” Flat Head  
05305-171-01-00  
HInge Stop Assembly  
Right (Shown): 05700-003-32-61  
Left: 05700-003-32-60  
Latch Spring  
05700-003-32-32  
Latch Nut (2 per Asm)  
05700-003-32-33  
HInge Stop Weldment  
Right (Shown): 05700-003-32-63  
Left: 05700-003-32-61  
O-ring (2 per Asm)  
05330-003-32-34  
Hinge Components secured with:  
Locknut, 1/4”-20 S/S Hex with Nylon Insert  
05310-374-01-00  
Cover, Left Hinge Weldment  
05700-002-18-41  
Cover, Right HInge Weldment  
05700-002-18-42  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
FRAME & PANEL COMPONENTS  
W-Top Shroud  
05700-003-37-06  
W-Right Shroud  
05700-003-37-05  
Shroud Plug (2 per unit)  
05700-003-32-50  
Optional Back Panel  
05700-003-33-55  
Standard Back Panel  
05700-003-36-35  
W-Left Shroud  
05700-003-37-04  
Hardware:  
Nut, 1/4”-20 Serrated Hex (4 per Asm)  
05310-011-66-49  
Nut, 5/16”-18 Cad Spline (4 per Asm)  
05310-959-03-00  
The swivel feet used  
on the frames may be  
ordered using  
05340-108-02-00  
Bottom Panel  
05700-003-32-92  
Right Frame Weldment  
05700-003-31-90  
Left Frame Weldment  
05700-003-31-91  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MISCELLANEOUS PARTS  
Rail, Left Rack  
05700-031-37-89  
Rail, Right Rack  
05700-031-37-88  
Components secured with:  
Locknut, 1/4”-20 S/S Hex with Nylon Insert  
05310-374-01-00  
Splash Shield  
05700-003-33-51  
Strainer Weldment  
05700-003-32-81  
Strainer Spacer  
05700-001-35-83  
Attaches with:  
Nut, Nylon Wing, 1/4”-20  
05310-994-01-00  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STANDS & COMPONENTS  
Installation Instructions: To install the stand, first remove the adjustable feet from the machine. Place machine on table  
and use the square mounting holes to line up the machine. Re-insert adjustable feet through bottom of table top and tighten  
to lock machine to table.  
6” Stand Assembly  
05700-003-34-24  
Stand  
05700-002-88-82  
Bullet Foot  
05340-108-01-03  
6” Leg  
05700-021-61-10  
18” Stand Assembly  
05700-003-34-25  
Stand  
05700-002-88-82  
Cross Member  
Bracket  
04730-003-25-89  
Cross Brace  
05700-003-25-90  
Bullet Foot  
05340-108-01-03  
18” Leg  
05700-002-89-47  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
HTS-11 (SCALE PREVENTION & CORROSION CONTROL DEVICE)  
Replacement Cartridge  
(Inspect at least every 6 months)  
04730-003-28-04  
Kleenware HTS-11 System  
04730-003-28-03  
The HTS-11 must be installed vertically. The provided  
bracket is to be secured to the wall. Observe proper  
inlet/outlet water directions. Flow directions are mold-  
ed into the top of the head. Line pressure should be  
released prior to changing cartridges. De-liming of  
equipment prior to installation is recommended, but  
not required.  
Replacement Test Strip  
06401-003-28-06  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
GO BOX KIT  
A GO*Box is a kit of the most needed parts for a particular model or model family to successfully effect a repair in the first call  
90% or more of the time.  
The following components may be ordered together using 06401-003-35-26  
ITEM  
1
QTY  
1
DESCRIPTION  
Mfg. No.  
Rinse Thermostat  
Contactor/Heater  
05930-003-06-48  
05945-002-74-20  
05330-002-34-22  
05330-002-81-83  
05930-003-31-44  
05945-111-89-75  
05945-002-47-41  
05930-011-49-54  
05930-301-49-00  
05930-011-49-55  
04810-100-09-18  
04820-003-06-13  
05945-003-33-09  
05330-011-42-10  
05340-112-01-11  
05700-021-35-97  
05700-111-35-29  
05700-011-76-41  
2
1
3
1
Pump Seal  
4
1
Pump Gasket O-Ring  
Door Switch (Reed)  
Relay, 220-240 Volt  
Relay, 115 Volt  
5
1
6
1
7
1
8
2
Switch, Det./Rinse Aid Prime  
Switch, On/Off  
Switch, Auto/Manual  
Fill Solenoid Valve 1/2"  
Vacuum Breaker  
Timer, Universal  
Washer Rinse Arm  
Ring , Retaining  
Bearing Assembly, Wash Arm  
Squeeze Tube, 3/16 ID X 3/8 OD  
Squeeze Tube  
9
2
10  
11  
12  
13  
14  
15  
16  
17  
18  
2
1
1
1
4
2
2
2
2
*Special Pricing available when purchased with above Go*Box. Call for details.  
19*  
1
Pump & Motor Assy. S/S  
06105-002-72-75  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6:  
ELECTRICAL SCHEMATICS  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
Avenger HT 208-230 VOLT - 60 HERTZ - SINGLE PHASE  
™
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
Avenger LT 115 VOLT - 60 HERTZ - SINGLE PHASE  
™
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7:  
JACKSON MAINTENANCE &  
REPAIR CENTERS  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
ALABAMA TO FLORIDA  
ALABAMA  
CALIFORNIA  
P & D APPLIANCE  
4220-C ROSEVILLE ROAD  
NORTH HIGHLANDS, CA  
95660  
GCS SERVICE INC.  
PHILADELPHIA, PA  
(215)925-6217  
JONES-McLEOD APPLIANCE  
SVC  
1616 7TH AVE. NORTH  
BIRMINGHAM, AL 35203  
(205) 251-0159  
800-821-1150  
FAX: (205) 322-1440  
[email protected]  
BARKERS FOOD MACHINERY  
SERVICES  
5367 SECOND STREET  
IRWINDALE, CA 91706  
(626) 960-9390  
800-258-6999  
FAX: (626) 337-4541  
[email protected]  
800-441-9115  
(916) 974-2772  
FAX: (215) 925-6208  
800-824-7219  
FAX:(916) 974-2774  
ELMER SCHULTZ SERVICE  
36 BELMONT AVE.  
WILLMINGTON, DE 19804  
(302) 655-8900  
800-225-0599  
FAX: (302) 656-3673  
[email protected]  
COMMERCIAL APPLIANCE  
SERVICE, INC.  
281 LATHROP WAY, #100  
SACRAMENTO, CA 95815  
(916) 567-0203  
JONES-McLEOD APPLIANCE  
SVC  
GCS SERVICE INC.  
LOS ANGELES, CA  
(213) 683-2090  
800-327-1433  
FAX: (213) 683-2099  
854 LAKESIDE DRIVE  
MOBILE, AL 36693  
(251) 666-7278  
(800) 464-2222  
(916) 567-0324 FAX  
EMR SERVICE DIVISION  
106 WILLIAMSPORT CIRCLE  
SALISBURY, MD 21804  
(410) 543-8197  
800-237-9859  
FAX: (251) 661-0223  
COLORADO  
GCS SERVICE INC.  
SANTA ANA, CA  
(714) 542-1798  
800-540-0719  
FAX: (714) 542-4787  
GCS SERVICE INC.  
SHERIDAN, CO  
(303) 371-9054  
800-972-5314  
FAX: (303) 371-4754  
FAX: (410) 548-4038  
ALASKA  
FLORIDA  
RESTAURANT APPLIANCE  
SERVICE  
7219 ROOSEVELT WAY NE  
SEATTLE, WA 98115  
(206) 524-8200  
800-433-9390  
FAX: (206) 525-2890  
[email protected]  
COMMERCIAL APPLIANCE  
SERVICE  
GCS SERVICE INC.  
S. SAN FRANCISCO, CA  
(650) 635-0720  
800-969-4427  
FAX: (650) 871-4019  
HAWKINS COMMERCIAL  
APPLIANCE SERVICE  
3000 S. WYANDOT ST.  
ENGLEWOOD, CO 80110  
(303) 781-5548  
(800) 624-2117  
FAX: (303) 761-5561  
[email protected]  
8416 LAUREL FAIR CIRCLE  
BLDG 6, SUITE 114  
TAMPA, FL 33610  
(813) 663-0313  
800-282-4718  
COMMERCIAL APPLIANCE  
SERVICE, INC.  
6507 PACIFIC AVENUE, SUITE  
102  
STOCKTON, CA 95207  
(916) 567-0203  
(800) 464-2222  
(916) 567-0266 FAX  
FAX: (813) 663-0212  
commercialappliance@world-  
net.att.net  
ARIZONA  
AUTHORIZED COMMERCIAL  
FOOD EQMT. SVC  
4832 SOUTH 35TH STREET  
PHOENIX, AZ 85040  
(602) 234-2443  
800-824-8875  
FAX: (602) 232-5862  
[email protected]  
METRO APPLIANCE SERVICE  
1640 S BROADWAY  
DENVER, CO 80210  
(303) 778-1126  
800-525-3532  
FAX: (303) 778-0268  
[email protected]  
GCS SERVICE INC  
MIAMI, FL  
(305) 621-6666  
800-766-8966  
FAX: (305) 621-6656  
GCS SERVICE INC.  
SAN DIEGO, CA  
(858) 549-8411  
800-422-7278  
FAX: (858) 549-2323  
GCS SERVICE INC  
ORLANDO, FL  
GCS SERVICE INC.  
PHOENIX, AZ  
CONNECTICUT  
(407) 841-2551  
800-338-7322  
(602) 474-4510  
GCS SERVICE INC.  
HARTFORD, CT  
(860) 549-5575  
800-423-1562  
FAX: (860) 527-6355  
FAX: (407) 423-8425  
800-510-3497  
INDUSTRIAL ELECTRIC SVC.  
5662 ENGINEER DRIVE  
HUNTINGTON BEACH, CA  
92649  
FAX: (602) 470-4511  
NASS PARTS AND SERVICE,  
INC.  
ARKANSAS  
1144 BELVILLE ROAD, UNIT  
359  
(714) 379-7100  
BROMLEY PARTS & SVC  
10TH AND RINGO  
(800-457-3783  
SUPERIOR KITCHEN SER-  
VICE INC.  
DAYTONA BEACH, FL 32114  
(386) 226-2642  
FAX: (714) 379-7109  
P.O. BOX 1688  
22 THOMPSON ROAD  
WINDSOR, CT 06088  
(888) 590-1899  
(800) 432-2795  
(386) 736-7695 FAX  
LITTLE ROCK, AR 72202  
(501) 374-0281  
P & D APPLIANCE SVC  
100 SOUTH LINDEN AVE.  
S. SAN FRANCISCO, CA 94080  
(650) 635-1900  
800-424-1414  
FAX: (650) 635-1919  
[email protected]  
800-482-9269  
(888) 590-1996 FAX  
GCS SERVICE INC  
TAMPA, FL  
FAX: (501) 374-8352  
[email protected]  
[email protected]  
DELAWARE  
(813) 626-6044  
800-282-3008  
FOOD SERVICE EQMT.  
2101 PARKWAY SOUTH  
BROOMALL, PA 19008  
(610) 356-6900  
FAX: (610) 356-2038  
[email protected]  
FAX: (813) 621-1174  
GCS SERVICE,INC.  
3717 CHERRY ROAD  
MEMPHIS, TN 38118  
(901) 366-4587  
800-262-9155  
FAX: (901) 366-4588  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
FLORIDA TO MARYLAND  
JONES-McLEOD APPLIANCE  
SVC  
HAWAII  
INDIANA  
CERTIFIED SERVICE CENTER  
1051 GOODWIN DRIVE  
LEXINGTON, KY 40505  
(606) 254-8854  
854 LAKESIDE DRIVE  
MOBILE, AL 36693  
(251) 666-7278  
FOOD EQMT. PARTS &  
SERVICE CO.  
GCS SERVICE INC.  
INDIANAPOLIS, IN  
(317) 545-9655  
800-727-8710  
FAX: (317) 549-6286  
300 PUUHALE RD.  
HONOLULU, HI 96819  
(808) 847-4871  
800-237-9859  
FAX: (251) 661-0223  
[email protected]  
800-432-9269  
FAX: (606) 231-7781  
[email protected]  
FAX: (808) 842-1560  
[email protected]  
B622 LA PAS TRAIL  
INDIANAPOLIS, IN 46268  
(317) 290-8060  
(800) 410-9794  
(317) 290-8085 FAX  
NASS PARTS AND SERVICE,  
INC.  
GCS SERVICE INC.  
LOUISVILLE, KY  
(502) 367-1788  
800-752-6160  
FAX: (502) 367-0400  
IDAHO  
1108 SOUTH WOODS AVENUE  
ORLANDO, FL 32805  
(407) 425-2681  
RESTAURANT APPLIANCE  
SVC.  
7219 ROOSEVELT WAY NE  
SEATTLE, WA 98115  
(206) 524-8200  
800-433-9390  
FAX: (206) 525-2890  
[email protected]  
(800) 432-2795  
(407) 425-3463 FAX  
IOWA  
GOODWIN TUCKER GROUP  
GCS SERVICE INC.  
LEXINGTON, KY  
(606) 255-0746  
800-432-9260  
FAX: (606) 255-0748  
NASS PARTS AND SERVICE,  
INC.  
2900 DELAWARE AVENUE  
DES MOINES, IA 50317  
(515) 262-9308  
800-372-6066  
FAX: (515) 262-2936  
[email protected]  
1376 HEIDE AVENUE  
PALM BAY, FL 32907  
(321) 952-2012  
RON'S SERVICE  
LOUISIANA  
(800) 432-2795  
(321) 953-0266 FAX  
703 E 44TH STREET STE 10  
GARDEN CITY, ID 83714  
(208) 375-4073  
HERITAGE SERVICE GROUP  
1532 RIVER OAKS WEST  
NEW ORLEANS, LA 70123  
(504) 734-8864  
(800) 499-2351  
(504) 733-2559 FAX  
CONES REPAIR SVC.  
1056 27TH AVENUE SW  
CEDAR RAPIDS, IA 52404  
(319) 365-3325  
800-747-3326  
FAX: (319) 365-0885  
GEORGIA  
FAX: (208) 375-4402  
GCS SERVICE INC  
ATLANTA, GA  
ILLINOIS  
(770) 452-7322  
800-334-3599  
CONES REPAIR SVC.  
2408 40TH AVE.  
MOLINE, IL 61265  
(309) 797-5323  
800-716-7070  
FAX: (309)797-3631  
[email protected]  
MAINE  
FAX: (770) 452-7473  
KANSAS  
GCS SERVICE INC.  
CHELSEA, MA  
HERITAGE FOODSERVICE  
GROUP OF ATLANTA  
2100 NORCROSS PKWY.  
SUITE 130  
NORCROSS, GA 30071  
(770) 368-1465  
866-388-9837  
FAX: (866) 388-9838  
GCS SERVICE INC.  
KANSAS CITY, MO  
(816) 920-5999  
800-229-6477  
FAX: (816) 920-7387  
(617) 889-9393  
800-225-1155  
FAX: (617) 889-1222  
EICHENAUER SERVICES INC.  
130 S OAKLAND ST.  
DECATUR, IL 62522  
(217) 429-4229  
800-252-5892  
FAX: (217) 429-0226  
[email protected]  
MASSACHUSETTS RESTAU-  
RANT SUPPLY  
GENERAL PARTS, INC.  
1101 E. 13TH STREET  
KANSAS CITY, MO 64106  
(816) 421-5400  
(800) 279-9967  
(816) 421-1270 FAX  
34 SOUTH STREET  
SOMERVILLE, MA 02143  
(617) 868-1930  
WHALEY FOODSERVICE  
REPAIRS  
109-A OWENS INDUSTRIAL  
DRIVE  
SAVANNAH, GA 31405  
(912) 447-0827  
888-765-0036  
FAX: (912) 447-0826  
800-338-6737  
FAX: (617) 686-5331  
GCS SERVICE INC.  
ELMHURST, IL  
KENTUCKY  
PINE TREE FOOD EQUIP-  
MENT  
(630) 941-7800  
800-942-9689  
CERTIFIED SERVICE CENTER  
127 DISHMAN LANE  
BOWLING GREEN, KY 42101  
(270) 783-0012  
(877) 907-0012  
FAX: (270) 783-0058  
175 LEWISTON ROAD  
GRAY, ME 04039  
(207) 657-6400  
FAX: (630) 941-6048  
PIERCE PARTS & SERVICE  
2422 ALLEN ROAD  
MACON, GA 31216  
(478) 781-6003  
800-368-2512  
FAX: (478) 781-7186  
GCS SERVICE INC.  
ST. LOUIS, MO  
(800) 540-5427  
(207) 657-5464 FAX  
(314) 683-7444  
800-284-4427  
MARYLAND  
FAX: (314) 638-0135  
CERTIFIED SERVICE CENTER  
RAMCO BUSINESS PARK  
4283 PRODUCE ROAD  
LOUISVILLE, KY 40218  
(502) 964-7007  
800-637-6350  
FAX: (502) 964-7202  
[email protected]  
[email protected]  
EMR SERVICE DIVISION  
700 EAST 25TH STREET  
BALTIMORE, MD 21218  
(410) 467-8080  
800-879-4994  
FAX: (410) 467-4191  
[email protected]  
GENERAL PARTS, INC.  
248 JAMES STREET  
BENSONVILLE, IL 60106  
(630) 595-3300  
(800) 880-3604  
FAX: (630)595-0006  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
MARYLAND TO NEW YORK  
EMR SERVICE DIVISION  
106 WILLIAMSPORT CIRCLE  
SALISBURY, MD 21804  
(410) 543-8197  
MICHIGAN  
GCS SERVICE INC.  
ST. LOUIS, MO  
NEW HAMPSHIRE  
GCS SERVICE INC.  
LIVONIA, MI  
(314) 638-7444  
GCS SERVICE INC.  
CHELSEA, MA  
800-284-4427  
FAX: (314) 638-0135  
888-687-8080  
(248) 426-9500  
800-772-2936  
(617)889-9393  
FAX: (410) 548-4038  
[email protected]  
800-225-1155  
FAX: (248) 426-7555  
KAEMMERLIN PARTS & SVC.  
2728 LOCUST STREET  
ST. LOUIS, MO 63103  
(314) 535-2222  
FAX: (314) 535-6205  
[email protected]  
FAX: (617) 889-1222  
EMR SERVICE DIVISION  
5316 Sunnyside Ave.  
Beltsville, MD 20715  
(301) 931-7000  
ACE SERVICE CO.  
95 HAMPTON AVE.  
NEEDHAM, MA 02494  
(781) 449-4220  
800-225-4510 MA & NH  
FAX: (781) 444-4789  
[email protected]  
JACKSON SERVICE COMPA-  
NY  
3980 BENSTEIN RD.  
COMMERCE TWSHP, MI 48382  
(248) 363-4159  
800-348-2365  
FAX: (301) 931-3060  
[email protected]  
GCS SERVICE INC.  
SILVER SPRING, MD  
(301) 585-7550 (DC)  
(410) 792-0338 (BALT)  
(800) 638-7278  
800-332-4053  
FAX: (248) 363-5448  
GENERAL PARTS, INC.  
1101 EAST 13TH STREET  
KANSAS CITY, MO 64106  
(816) 421-5400  
(800) 279-9967  
(816) 421-1270 FAX  
MASSACHUSETTS RESTAU-  
RANT SUPPLY  
GCS SERVICE INC.  
GRAND RAPIDS, MI  
(616) 241-0200  
800-823-4866  
FAX: (616) 241-0541  
34 SOUTH STREET  
SOMERVILLE, MA 02143  
(617) 868-1930  
FAX: (301) 495-4410  
MONTANA  
800-338-6737  
FAX: (617) 868-5331  
MASSACHUSETTS  
MINNESOTA  
RESTAURANT APPLIANCE  
SVC.  
7219 ROOSEVELT WAY NE  
SEATTLE, WA 98115  
(206) 524-8200  
800-433-9390  
FAX: (206) 525-2890  
[email protected]  
ACE SERVICE CO.  
95 HAMPTON AVE.  
NEEDHAM, MA 02494  
(781) 449-4220  
800-225-4510 MA & NH  
FAX: (781) 444-4789  
[email protected]  
NEW JERSEY  
GCS SERVICE INC.  
MINNEAPOLIS, MN  
(612) 546-4221  
800-345-4221  
FAX: (612) 546-4286  
JAY HILL REPAIRS  
90 CLINTON RD.  
FAIRFIELD, NJ 07004  
(973) 575-9145  
800-836-0643  
FAX: (973) 575-5890  
[email protected]  
MASSACHUSETTS RESTAU-  
RANT SUPPLY  
GENERAL PARTS, INC.  
11311 HAMPSHIRE AVENUE  
SOUTH  
NEBRASKA  
34 SOUTH STREET  
SOMERVILLE, MA 02143  
(617) 868-1930  
GOODWIN - TUCKER GROUP  
7535 D STREET  
OMAHA, NE 68124  
(402) 397-2880  
800-228-0342  
FAX: (402) 397-2881  
[email protected]  
GCS SERVICE INC.  
EAST RUTHERFORD, NJ  
(973) 614-0003  
800-399-8294  
FAX: (973) 614-0230  
BLOOMINGTON, MN 55438-  
2456  
800-338-6737  
FAX: (617) 868-5331  
(952) 944-5800  
(800) 279-9980  
(800) 279-9980 FAX  
GCS SERVICE INC.  
CHELSEA, MA  
GCS SERVICE INC.  
PHILADELPHIA, PA  
(215) 925-6217  
800-441-9115  
FAX: (215) 925-6208  
MISSISSIPPI  
(617) 889-9393  
NEVADA  
800-225-1155  
GCS SERVICE INC.  
JACKSON, MS  
FAX: (617) 889-1222  
HI TECH COMMERCIAL SER-  
VICE  
1840 STELLA LAKE STREET  
NORTH LAS VEGAS, NV 89106  
(702) 649-4616  
(877) 924-4832  
FAX: (702) 649-4607  
[email protected]  
(601) 956-7800  
GCS SERVICE INC.  
HARTFORD, CT  
(860) 549-5575  
800-723-1562  
FAX: (860) 527-6355  
800-274-5954  
ELMER SCHULTZ SERVICES  
201 W. WASHINGTON AVE.  
PLEASANTVILLE, NJ 08232  
(609) 641-0317  
FAX: (601) 956-1200  
GCS SERVICE INC.  
MEMPHIS, TN  
800-378-1641  
(901) 366-4587  
FAX:(609) 641-8703  
SUPERIOR KITCHEN SER-  
VICE INC.  
800-262-9155  
[email protected]  
FAX: (901) 366-4588  
5454 LOUIE LANE  
RENO, NV 89511  
(775) 852-9696  
399 FERRY STREET  
EVERETT, MA 02149  
(617) 389-1899  
NEW YORK  
MISSOURI  
FAX: (775) 852-5104  
APPLIANCE INSTALLATION  
AND SERVICE CORP.  
1336 MAIN STREET  
BUFFALO, NY 14209  
(716) 884-7425  
800-722-1252  
FAX: (716) 884-0410  
[email protected]  
(888) 590-1899  
(617) 389-1996 FAX  
GCS SERVICE INC.  
KANSAS CITY, MO  
(816) 920-5999  
800-229-6477  
FAX: (816) 920-7387  
GCS SERVICE INC.  
LAS VEGAS, NV  
(702) 450-3495  
800-500-9060  
FAX: (702) 450-3491  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
NEW YORK TO PENNSYLVANIA  
B.E.S.T. INC.  
AUTHORIZED APPLIANCE  
SERVICECENTER  
OHIO  
OREGON  
3003 GENESEE STREET  
BUFFALO, NY 14225  
(716) 893-6464  
904 S. MARSHALL ST.  
WINSTON-SALEM, NC 27403  
(336) 725-5396  
CERTIFIED SERVICE CENTER  
890 REDNA TERRACE  
CINCINNATI, OH 45215  
(513) 772-6600  
800-543-2060  
FAX: (513) 612-6600  
[email protected]  
RON'S SERVICE  
16364 SW 72ND AVE  
PORTLAND, OR 97224  
(503) 624-0890  
800-338-5011  
FAX: (716) 893-6466  
[email protected]  
FAX:(336) 721-1289  
800-851-4118  
FAX: (503) 684-6107  
[email protected]  
AUTHORIZED APPLIANCE  
SERVICECENTER  
DUFFY'S EQUIPMENT SVC.  
3138 ONEIDA STREET  
SAUQUOIT, NY 13456  
(315) 737-9401  
800-443-8339  
FAX: (315) 737-7132  
[email protected]  
104 HINTON AVE.  
WILMINGTON, NC 28403  
(910) 313-1250  
CERTIFIED SERVICE CENTER  
171J-K NORTH HAMILTON RD.  
COLUMBUS, OH 43213  
(614) 751-3769  
PENNSYLVANIA  
FAX:(910) 313-6130  
A.I.S. COMMERCIAL PARTS &  
SERVICE  
1816 WEST 26TH STREET  
ERIE, PA 16508  
(814) 456-3732  
800-332-3732  
FAX: (814) 452-4843  
[email protected]  
WHALEY FOODSERVICE  
8334-K ARROWRIDGE BLVD  
CHARLOTTE, NC 28273  
(704) 529-6242  
FAX: (704) 529-1558  
[email protected]  
(866) 862-1252  
FAX: (614) 751-5792  
NORTHERN PARTS & SVC.  
21 NORTHERN AVENUE  
PLATTSBURGH, NY 12903  
(518) 563-3200  
800-634-5005  
FAX: (800) 782-5424  
[email protected]  
[email protected]  
CERTIFIED SERVICE CENTER  
6025 N. DIXIE DRIVE  
DAYTON, OH 45414  
(937) 898-4040  
(800) 257-2611  
FAX: (937) 898-4177  
[email protected]  
WHALEY FOODSERVICE  
REPAIRS  
203-D CREEK RIDGE RD.  
GREENSBORO, NC 27406  
(336) 333-2333  
FAX: (336) 333-2533  
[email protected]  
ELMER SCHULTZ SVC.  
540 NORTH 3RD STREET  
PHILADELPHIA, PA 19123  
(215) 627-5400  
FAX: (215) 627-5408  
[email protected]  
GCS SERVICE INC.  
BROOKLYN, NY  
(718) 486-5220  
800-969-4271  
FAX: (718) 486-6772  
COMMERCIAL PARTS & SVC.  
OF COLUMBUS  
5033 TRANSAMERICA DRIVE  
COLUMBUS, OH 43228  
(614) 221-0057  
GCS SERVICE INC.  
PHILADELPHIA, PA  
(215) 925-6217  
800-441-9115  
FAX: (215) 925-6208  
WHALEY FOODSERVICE  
REPAIRS  
335-105 SHERWEE DRIVE  
RALEIGH, NC 27603  
(919) 779-2266  
FAX: (919) 779-2224  
[email protected]  
ALL SERVICE KITCHEN  
EQUIPMENT REPAIR  
10 CHARLES ST.  
NEW HYDE PARK, NY 11040  
(516) 378-1176  
FAX: (516) 378-1735  
800-837-8327  
FAX: (614) 221-3622  
GCS SERVICE INC.  
COLUMBUS, OH  
(614) 476-3225  
800-282-5406  
FAX: (614) 476-1196  
GCS SERVICE INC.  
HARRISBURG, PA  
(717) 564-3282  
800-367-3225  
FAX: (717) 564-9286  
ALL ISLAND REPAIRS  
40-9 BURT DRIVE  
DEER PARK, NY 11729  
(631) 242-5588  
WHALEY FOODSERVICE  
REPAIRS  
6418-101 AMSTERDAM WAY  
WILMINGTON, NC 28405  
(910) 791-0000  
ELECTRICAL APPLIANCE  
REPAIR SVC.  
5805 VALLEY BELT ROAD  
CLEVELAND, OH 44131  
(216) 459-8700  
800-621-8259  
FAX: (216) 459-8707  
[email protected]  
GCS SERVICE INC.  
PITTSBURGH, PA  
(412) 787-1970  
800-738-1221  
FAX: (412) 787-5005  
FAX: (631) 242-6102  
FAX: (910) 791-6662  
[email protected]  
NORTH CAROLINA  
AUTHORIZED APPLIANCE  
SERVICECENTER  
1020 TUCKASEEGEE RD.  
CHARLOTTE, NC 28208  
(704) 377-4501  
(800) 532-6127  
FAX:(704) 377-4504  
NORTH DAKOTA  
K & D PARTS AND SERVICE  
CO.  
1833-41 N CAMERON STREET  
HARRISBURG, PA 17103  
(717) 236-9039  
800-932-0503  
FAX: (717) 238-4367  
[email protected]  
GCS SERVICE INC.  
MINNEAPOLIS, MN  
(612) 546-4221  
800-345-4221  
FAX: (612) 546-4286  
OKLAHOMA  
HAGAR RESTAURANT EQMT.  
1229 W MAIN STREET  
OKLAHOMA CITY, OK 73106  
(405) 235-2184  
800-445-1791  
FAX: (405) 236-5592  
AUTHORIZED APPLIANCE  
SERVICECENTER  
800 N. PERSON ST.  
RALEIGH, NC 27604  
(919) 834-3476  
GENERAL PARTS, INC.  
10 SOUTH 18TH STREET  
FARGO, ND 58103  
(701) 235-4161  
(800) 279-9987  
(701) 235-0539 FAX  
CLARK SERVICE & PARTS  
306 AIRPORT DRIVE  
BOX 10  
SMOKETOWN, PA 17576  
(717) 392-5590  
(717) 392-5735  
FAX:(919) 834-3477  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
RHODE ISLAND TO WISCONSIN  
RHODE ISLAND  
WHALEY FOODSERVICE  
REPAIRS  
GCS SERVICE INC.  
HOUSTON, TX  
GCS SERVICE INC.  
VIRGINIA BEACH, VA  
(757) 464-3500  
GCS SERVICE INC.  
EAST PROVIDENCE, RI  
(401) 434-6803  
800-462-6012  
FAX: (401) 438-9400  
4740-A FRANCHISE STREET  
N. CHARLESTON, SC 29418  
(843) 760-2110  
(713)785-9187  
800-868-6957  
FAX: (713) 785-3979  
800-476-4278  
FAX: (757) 464-4106  
FAX: (843) 760-2255  
[email protected]  
GCS/STOVE PARTS  
2120 SOLANA STREET  
FORT WORTH, TX 76117  
(817) 831-0381  
800-433-1804  
FAX: (817) 834-7754  
[email protected]  
WASHINGTON  
SUPERIOR KITCHEN SER-  
VICE INC.  
SOUTH DAKOTA  
GCS SERVICE INC.  
SEATTLE, WA  
669 ELMWOOD AVENUE  
PROVIDENCE, RI 02907  
(888) 590-1899  
GCS SERVICE INC.  
MINNEAPOLIS, MN  
(612) 546-4221  
800-345-4221  
FAX: (612) 546-4286  
(206) 763-0353  
800-211-4274  
FAX: (206) 763-5943  
(401) 781-1996 FAX  
UTAH  
RESTAURANT APPLIANCE  
SERVICE  
7219 ROOSEVELT WAY, NE  
SEATTLE, WA 98115  
(206) 524-8200  
800-433-9390  
FAX: (206) 525-2890  
[email protected]  
SOUTH CAROLINA  
GENERAL PARTS, INC.  
10 SOUTH 18TH STREET  
FARGO, ND 58103  
(701) 235-4161  
(800) 279-9987  
(701) 235-0539 FAX  
LA MONICA'S RESTAURANT  
EQMT. SVC.  
6182 SOUTH STRATLER  
AVENUE  
MURRAY, UT 84107  
(801) 263-3221  
800-527-2561  
FAX: (801) 263-3229  
[email protected]  
AUTHORIZED APPLIANCE  
SERVICECENTER  
1811 TAYLOR ST.  
COLUMBIA, SC 29202  
(803) 254-8414  
FAX: (803) 254-5146  
TENNESSEE  
WEST VIRGINIA  
AUTHORIZED APPLIANCE  
SERVICECENTER  
GCS SERVICE INC.  
MEMPHIS, TN  
STATEWIDE SERVICE, INC.  
603 MAIN AVE.  
NITRO, WV 25143  
(304) 755-1811  
(800) 441-9739  
FAX: (304) 755-4001  
[email protected]  
2249 AUGUSTA RD.  
GREENVILLE, SC 29605  
(864) 235-9616  
VERMONT  
(901) 366-4587  
800-262-9155  
NORTHERN PARTS & SVC.  
4874 S. CATHERINE STREET  
PLATTSBURGH, NY 12901  
(518) 563-3200  
FAX: (864) 235-9623  
FAX: (901) 366-4588  
WHALEY FOODSERVICE  
REPAIRS  
I 26&US1  
P.O. BOX 4023  
GCS SERVICE INC.  
NASHVILLE, TN  
(615) 244-8050  
800-831-7174  
FAX: (615) 244-8885  
800-634-5005  
FAX: (800) 782-5424  
WISCONSIN  
[email protected]  
WEST COLUMBIA, SC 29170  
(803) 791-4420  
APPLIANCE SERVICE CEN-  
TER, INC.  
2439 ATWOOD AVE  
MADISON, WI 53704  
(608) 246-3160  
800-236-7440  
FAX: (608) 246-2721  
[email protected]  
GCS SERVICE INC.  
CHELSEA, MA  
800-877-2662  
TEXAS  
FAX: (803) 794-4630  
[email protected]  
(617)889-9393  
ARMSTRONG REPAIR CEN-  
TER  
5110 GLENMOUNT DRIVE  
HOUSTON, TX 77081  
(713) 666-7100  
800-392-5325  
FAX: (713) 661-0520  
[email protected]  
800-225-1155  
FAX: (617) 889-1222  
WHALEY FOODSERVICE  
REPAIRS  
748 CONGAREE ROAD  
GREENVILLE, SC 29607  
(864) 234-7011  
800-494-2539  
FAX: (864) 234-6662  
[email protected]  
VIRGINIA  
DAUBERS, INC.  
APPLIANCE SERVICE  
CENTER, INC.  
6843 W. BELOIT RD.  
WEST ALLIS, WI 53219  
(414) 543-6460  
800-236-6460  
FAX: (414) 543-6480  
[email protected]  
7645 DYNATECH COURT  
SPINGFIELD, VA 22153  
(703) 866-3600  
COMMERCIAL KITCHEN  
REPAIR CO.  
800-554-7788  
FAX: (703) 866-4071  
[email protected]  
WHALEY FOODSERVICE  
REPAIRS  
1377 N BRAZOS  
P.O BOX 831128  
1406-C COMMERCE PL.  
MYRTLE BEACH, SC 29577  
(843) 626-1866  
SAN ANTONIO, TX 78207  
(210) 735-2811  
GCS SERVICE INC.  
SILVER SPRING, MD  
(301) 585-7550(DC)  
(410) 792-0388(BALT)  
800-638-7278  
APPLIANCE SERVICE  
CENTER  
786 MORRIS AVE  
GREEN BAY, WI 54304  
(920) 496-9993  
800-236-0871  
FAX: (920) 496-9927  
[email protected]  
800-292-2120  
FAX: (843) 626-2632  
[email protected]  
FAX: (210) 735-7421  
[email protected]  
FAX: (301)495-4410  
GCS SERVICE INC.  
DALLAS, TX  
GCS SERVICE INC.  
RICHMOND, VA  
(804) 672-1700  
800-899-5949  
FAX: (804) 672-2888  
(972) 484-2954  
800-442-5026  
FAX: (972) 484-2531  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
WISCONSIN TO WYOMING/INTERNATIONAL  
GENERAL PARTS, INC.  
W223 N735 SARATOGA DRIVE  
WAUKESHA, WI 53186  
(262) 650-6666  
(800) 279-9946  
(262) 650-6660 FAX  
WYOMING  
HAWKINS COMMERCIAL  
APPLIANCE SERVICE  
3000 S. WYANDOT ST.  
ENGLEWOOD, CO 80110  
(303) 781-5548  
(800) 624-2117  
FAX: (303) 761-5561  
[email protected]  
METRO APPLIANCE SERVICE  
1640 S BROADWAY  
DENVER, CO 80210  
(303) 778-1126  
800-525-3532  
FAX: (303) 778-0268  
[email protected]  
INTERNATIONAL  
GLOBAL PARTS AND SUPPLY  
7758 NW 72ND ST  
MIAMI, FL 33166  
(305) 885-6353  
H.D. SHELDON AND CO  
19 UNION SQUARE, WEST  
NEW YORK, NY 10003  
(212) 627-1759  
(212) 924-6920  
CANADA  
THE GARLAND GROUP  
1177 KAMATO ROAD  
MISSISSAUGA, ONTARIO L4W  
1X4  
(905) 206-8380  
SALES  
(905) 624-1419  
FAX: (905) 624-1851  
SERVICE  
800-427-6668  
FAX: 800-361-7745  
March 13, 2007  
Avenger™ Series Technical Manual 7610-003-34-01 Rev. A  
Issued: 05-02-2007 Revised: N/A  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer WE 10 User Manual
Insignia DVD Player NS 2BRDVD User Manual
Integra Speaker System MZA 47 User Manual
Intel Computer Hardware SE7221BA1 E User Manual
JVC Camera Lens VN S200U S100U User Manual
JVC Computer Monitor DT R24L41D User Manual
Kenmore Gas Grill 4151613511 User Manual
Kenwood Answering Machine 6 User Manual
KitchenAid Plumbing Product KSW80T0M User Manual
Krell Industries Speaker RESOLUTION 1 User Manual