ENGLISH
WIDE LCD PANEL TV
INSTRUCTIONS
Contents
PREPARATION
Safety precautions............................... 2
Remote control buttons and functions... 3
Set up and connections....................... 4
Initial settings....................................... 6
Registering / Editing channels............. 6
FUNCTIONS
Picture setting...................................... 7
Sound setting ...................................... 9
Useful functions................................. 10
Viewing Teletext................................. 12
Watching Video or DVDs................... 12
REFERENCE
This illustration shows LT-32EX19.
Troubleshooting................................. 13
Technical information......................... 14
CH/CC List......................................... 15
Specification...................................... 16
The illustrations of LT-32EX19 is used in this instruction manual
for explanation purpose. Your TV may not look exactly the same
as illustrated.
LT - 32EX19
LT - 32BX19
GGT0303-001A-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
“AAA/R03”
Batteries
• Insert the batteries
Use two “AAA/R03” dry cell
batteries. Insert the batteries from
the · end, making sure the · and
ª polarities are correct.
Turn the TV on from standby
Colour button
Turn on “Clear SD”
Change the aspect ratio (P. 8)
V-Scroll
:OOM
!UTO
2EGULAR
0ANORAMIC
ꢀꢁꢂꢃ :OOM
ꢀꢄꢂꢃ :OOM
ꢀꢄꢂꢃ :OOM 3UBTITLE
&ULL
1. Select
WARNING:
If this symbol
is shown, it is
only valid in the
European Union.
0ANORAMIC
16:9 Zoom
Batteries shall not be exposed
to excessive heat such as
direct sunshine, fire or the like.
OK
Move the picture with
5 or ∞ while this bar
is displayed.
2. Set
Turn the volume off/on
Change channel/page
Turn on “Sound Meister”
Turn on “Eco Mode”
To Teletext (P. 12)
Display on-screen menu
RETURN PLUS function
Return to the frequently viewed channel.
RETURN +
Choose the channel
you want to
programme
Return Plus
Programmed!
Operate the menu
To previous screen
Press and hold
RETURN +
Adjust the volume, Turn off muting
View the Teletext (P. 12)
To cancel
Return Plus
Canceled!
Press and hold
Favourite channel setting. (P. 11)
1. Register the favourite channel
RETURN function
If you have not set or have cancelled the RETURN PLUS
channel, this will return to the previously viewed channel.
Press number
button (1-4 only)
Set 1-4 ?
Select TV or Video input
Channel information
Press and hold
Programmed! will be displayed.
Channel selection
Select the desired channel number.
For Hyper Scan
2. Recall the favourite channel
Press number
button (1-4 only)
CHANNEL
PR changes without changing the
Favourite 1-4 ?
picture. Once you stop pressing
CHANNEL+ or CHANNEL - button,
picture will change to the desired PR.
Press and hold
Press
• If the favourite channel has not been registed
then “No Memory” will be displayed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up and connections
LT-32EX19
Connect an aerial and VCR / DVD Player
AERIAL
LT-32EX19
Switch between TV / VIDEO
devices
Display on-screen menu / set
TV/VIDEO
MENU/OK
VIDEO-2
R
L
V
Change channel / Page /
Hyper Scan Function (P. 3)
CHANNEL
Power lamp
ON : Lit (Blue)
OFF: Unlit
Volume / Adjust
Power On / Off
VOLUME
Power lamp lights
while the TV is on.
• “Power Lamp” (P. 11)
Remote control sensor
To Headphone (P. 5)
OR
Care when setting
■ Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
■ When attaching the TV to the wall, use the optional JVC wall
VCR (DVD Player)
• After all the connections have been made, insert the plug into an
AC outlet.
mounting unit
Consult a qualified technician.
JVC assumes no responsibility for damage due to improper mounting.
200 mm x 200 mm mount which conforms to VESA standards.
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.
•
•
•
■ Installation requirements
•
1
2
To avoid overheating, ensure the unit has ample room.
•
To prevent the TV from falling thread
the belt through the hole on the back of
the stand and secure it to the TV rack.
ꢃꢂꢂ MM
Hole for belt
LT-32EX19
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
ꢀꢁꢂ MM ꢁꢂ MM
ꢀꢁꢂ MM
ꢁꢂ MM
Belt
(not provided)
LT-32EX19
Screw (not provided)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up and connections (continued)
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setup.
(Connecting cables are not supplied with this TV.)
VIDEO-1 Watching videos
Output
Input
HDMITM Connector.
•
Composite signal /
Component signal
(P. 16)
LT-32EX19
•
Sound L / R
• Use Component signal
“Video - 1 Setting” (P. 12)
HDMI-1
HDMI-2
HDMI-3
Headphones
DIGITAL VIDEO/AUDIO
VIDEO-2 Watching videos
To “HDMI-1”
To “HDMI-3”
Output
Input
• Composite signal
• Sound L / R
HD Video camera
To “HDMI-2”
DVD player
(HDMI compatible)
Component input
Composite input
HDMI-1
HDMI-2 Connecting HDMI devices
HDMI-3
DVD player
(HDMI compatible)
L
L
R
V
R
V
VIDEO-1
VIDEO-1
VCR / DVD recoder
Pr
Pb
Y
Pr
Pb
Y
Output
Input
Amplifier
• HDMI signal (P. 16)
(L)
(R)
Game
Video
• “HDMI Setting” (P. 12)
• HDMI-2 and HDMI-3 inputs do not
support analogue sound.
• Connect a “DVI” device to
“HDMI-1” (P.14)
• Please use a High Speed HDMITM
Cable. High Speed HDMITM Cables
are tested to carry an HD signal up
to 1080p and higher.
R
L
V
V
OUTPUT
VIDEO-1
L
L
R
VCR
To Video-2
DVD Player
R
Pr
Pb
Y
Game consoles Video camera
HDMI-1
VIDEO-2
PC
R
L
V
( DVI ANALOG AUDIO )
PC input line in
OUT
PC AUDIO
PC
Video and sound signal of a TV
channel you are viewing outputs
from this terminal
PC IN
(D-SUB)
Output
• Composite signal
• Sound L / R
• Check for PC compatibility.
“PC signals that can be displayed” (P. 14)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings
Registering / Editing channels
You can edit the channel list or register new channel manually.
>
Turn on the TV
Edit
1
Select a channel
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
• Show only when powering on
for the first time.
• The power on the unit can
also be used.
OK
OK
JVC logo appears
Select a language
Move
Move a channel position
2
3
1. Start
>
Edit
ID
>
Language
PR
01
02
03
04
05
06
07
08
09
10
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
1. Select
English
®ÅËAšÈÌ×ÅA
Castellano
Melayu
OK
OK
Français
0YCCÅÃÄ
OK
2. Move
Finish
ไทย
Tieáng Vieät
2. Set
Edit a channel name
>
ID
1. Select the character
2. Move to the next column
Select the Teletext language group
Edit
ID
PR
01
02
03
04
05
06
07
08
09
10
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
(Red)
>
Teletext Language
Select
A
A B C D E F
OK
Group-1
Group-2
Group-3
Group-4
Group-5
Group-6
OK
3. Set
Insert / Delete a channel
Insert/Delete
• See “Language group for Teletext” (P. 14)
1. Select a 2. Enter a
ꢀ
%DIT
02
ꢁꢂ
ꢁꢈ
ꢁꢊ
ꢁꢉ
ꢁꢃ
ꢁꢇ
ꢁꢄ
ꢁꢅ
ꢁꢆ
ꢂꢁ
)$
#(ꢋ##
#( ꢁꢈ
#( ꢁꢊ
number 0-9
button then,
receives the
broadcast
signal.
CH/CC
Automatically register channels (Auto Program)
(Green)
4
5
#(
ꢌꢌ
OK
! " # $ % &
#( ꢄꢇ
>
#( ꢂꢈ
#( ꢁꢆ
#( ꢁꢃ
#( ꢁꢈ
#( ꢂꢃ
#( ꢈꢅ
Auto Program
OK
CH 09
12%
(Yellow)
• Delete a channel by press
button.
• “CH/CC List” (P. 15)
Register a new channel
>
Manual
Check what was registered
Manual
ID
1. Beginning channel search
PR
01
02
03
04
05
06
07
08
09
10
CH/CC
CH 02
CH 03
CH 07 (B/G)
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
>
Edit
(Red)
or (Green)
From high From low
frequencies frequencies
(Blue)
PR
01
02
03
04
05
06
07
08
09
10
ID
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
B B C A B C
A B C DE F
OK
OK
2. Set
(Yellow)
(Blue)
• If you want to edit channel, read
the next column.
• Channel fine tunning ꢀ
• If the picture or sound is unnatural ꢀ
/
for select a system.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture setting
1. Display “Picture” menu
2. Select item and setting or adjust
• To enter an items menu
1. Select
2. Adjust
1. Select
0ICTURE
1. Select
ꢀ
Picture
ꢀ
0ICTURE -ODE
"ACKLIGHT
#ONTRAST
"RIGHTNESS
3HARPNESS
#OLOUR
"RIGHT
MENU
OK
OK
OK
2. Enter
3. Finish
2. Enter
4INT
7HITE "ALANCE
&EATURES
#OOL
ꢀ
You can select a preset picture setting according to your favour.
Bright : Hightens contrast and sharpness.
Game Mode : Adjust sharpness of the picture when play the game.
Picture Mode
Soft
: Softens contrast and sharpness.
: Standardize picture adjustment.
Standard
You can change the backlight brightness.
Darker Brighter
Backlight
Contrast
Brightness
Sharpness
Colour
You can change the contrast of the picture.
Lower Higher
You can change the brightness of the picture.
Darker Brighter
You can change the sharpness of the picture.
Softer Sharper
You can change the colour of the picture.
Lighter Deeper
You can change tint only in NTSC.
Reddish Greenish
Tint
You can change the white balance of the picture to better match the type of video being view.
Cool
Warm
Mid
: Bluish white colour.
: Reddish white colour.
: Normal white colour.
White Balance
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture setting (continued)
Finer Picture adjustment
ꢀ
&EATUREA
#LEAR 3$
/FF
/FF
/FF
/FF
/FF
/FF
/FF
/FF
/FF
$IGITAL 6.2
$IGI0URE
0ULL $OWN
#OLOUR -ANAGEMENT
0ICTURE -ANAGEMENT
3MART 0ICTURE
$YNAMIC "ACKLIGHT
-0%' .OISE 2EDUCTION
#OLOUR 3YSTEM
:OOM
:
For clearly picture (Off / Mode-1 / Mode-2)
Clear SD
When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management
and MPEG Noise Reduction cannot operate.
Features
Digital VNR
DigiPure
:
:
:
:
:
:
Reduce the amount of noise in original picture. (Off / On)
For natural - looking outlines (Off / On)
For smooth cinema film (Auto / Off / On)
For natural - looking pictures (Off / On)
Fix bright / dark pictures. (Off / On)
Pull Down
Colour Management
Picture Management
Smart Picture
Make it easier to view white areas (Off / On)
Dynamic Backlight
:
:
Reduce the brightness of the backlight when the screen is dark (Off / On)
Reduce MPEG video noise (Off / On)
MPEG Noise
Reduction
:
:
When there is no colour, change the colour system. (PAL / SECAM / NTSC 3.58 / NTSC 4.43 / AUTO)
Colour System
Zoom
Change the aspect ratio.
• When 720p or 1080i or 1080p signal is
received, “Full”, “Slim” and “Panoramic
Zoom” can be selected.
• In PC mode, “Regular” and “Full” can
be selected.
ꢅꢅ
:OOM
Panoramic
16 : 9
Regular/Slim
4 : 3
14:9 Zoom
14 : 9
ꢅ
ꢅ
!UTO
0ANORAMIC
2EGULAR
0ANORAMIC
ꢀꢄꢂꢃ :OOM
ꢀꢁꢂꢃ :OOM
ꢀꢁꢂꢃ :OOM 3UBTITLE
&ULL
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound setting
1. Display “Sound” menu.
2. Select item and setting or adjust.
1. Select
2. Adjust
Sound
1. Select
MENU
■
D <
I II Mono
Stereo/I II
Sound
Sound Meister
Treble
Off
OK
OK
Bass
Surround
Balance
Voice Enhancer
Al Volume
3. Finish
Off
Off
2. Enter
■
Stereo/I II
Select the broadcast sound stereo, mono or bilingual language (u: Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono)
Sound Meister
Treble
Ambience (Off / Dynamic / Pure / Living)
Compensates high frequencies to widen the frequency band. (Weaker
Compensates low frequencies to widen the frequency band. (Weaker
Stronger)
Stronger)
Bass
Surround
Balance
Expands the stereo sound naturally. (Narrow
Wide)
Speaker balance (Left Stronger
Right Stronger)
Voice Enhancer
Al Volume
Sound enhancement technology (On/Off)
Prevent sudden increase or decrease of sound when changing channels. (On/Off)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions
1. Display “Features” menu.
MENU
• To enter an items menu
2. Select item and setting or adjust.
Features
1. Select
1. Select
2. Adjust
>
On Timer
Sleep Timer
1. Select
>
Channel Guard
Blue Back
Child Lock
Auto Shutoff
Favourite Setting
Power Lamp
Eco Mode
OK
Off
Off
Off
OK
OK
Features
>
2. Enter
3. Finish
2. Enter
Off
Off
1. Select PR channel that you want to watch.
1. Select PR
channel
2. Set the On time to your desired period at time.
On Timer
1. Select “On
Timer”
>
On Timer
2
5
8
0
3
6
9
1
4
7
>
TV to turn on
automatically from
standby mode at
a set channel and
time.
>
PR
02
:
On Timer
00
00
OK
OK
OK
2. Set
3. Set
2. Select item
(Blue)
Note : Press
for reset time setting.
>
Sleep Timer
> 0
Sleep Timer
1. Select a time in minutes Note : When the remaining elapse is one minute,
“Good Night!” appears on the screen.
120
TV to turn off
Off
>
OK
automatically to
standby mode after
a set time.
2. Set
1. Select “Channel Guard”
2. Select a channel and lock it ( : locked )
Channel Guard
>>
Lock / Release
(Blue)
Channel Guard
ID
1. Select a
number
1. Select a
channel
>
Set ID No.
PR
01
02
03
04
05
06
07
08
09
10
CH/CC
CH 02
CH 03
CH 07
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
Stop children from
watching specific
channels.
0
0
0
0
0
BBCABC
ABCDEF
OK
OK
2. To the next
column
3. Enter
• View a locked channel by use the numerical buttons to enter the channel number. When appears, press “DISPLAY”
button and enter your “ID No.”
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions (continued)
Blue Back
Child Lock
Auto Shutoff
Display a blue screen and mute the sound when the signal is weak or absent. (On / Off)
Disables the side control buttons of the TV. (On / Off)
Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (On / Off)
Delete the favourite channel that you registered.
(Blue)
1. Select
>
>
Favourite Setting
Favourite Setting
1
1
PR 01
PR 03
PR 02
PR 01
PR 02
Favourite Setting
2
3
4
2
3
4
OK
To delete
Power Lamp
Eco Mode
Power lamp lights while the TV is on. (On / Off) (P. 4)
Adjust contrast of light and dark according to the brightness of your room. (Off / Eco-1 / Eco-2)
• Change the on screen menu size.
2. Select “Appearance”
1. Display “Set Up” menu.
Appearance
3ET 5P
Change the on-screen
menu size.
ꢃ
ꢃ
ꢃ
!UTO 0ROGRAM
%DIT ꢂ -ANUAL
,ANGUAGE
6IDEOꢀꢁ 3ETTING
!PPEARANCE
4ELETEXT ,ANGUAGE
($-) 3ETTING
0# 3ETTING
1. Select
1. Select
MENU
OK
OK
6IDEO
3IZEꢀꢁ
ꢃ
ꢄ
ꢃ
ꢃ
ꢃ
Set Up
2. Enter
2. Adjust to
Size-1 / Size-2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Teletext
Watching Video or DVDs
Select the input Source.
!6 3ELECT
You can watch the Teletext broadcast channel with Text Functions.
Note: TV/VIDEO
button select the
video source by
move down or
use button 0-6 for
selection.
1. Select
TV/VIDEO
ꢀ
ꢁ
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
!6
6IDEOꢂꢁ
6IDEOꢂꢃ
($-)
($-)
($-)
0#
TV mode <--> TEXT mode
1.
OK
ꢁ
ꢃ
ꢄ
2. Set
2. Select a Teletext page by press number button (0-9)
CHANNEL
• Operate the connected device and play video.
• Move up or down a page by
1. Select “Set Up”
MENU
1. Select
Bookmark your favourite page.
MODE
OK
(Red) (Green) (Yellow) (Blue)
Set Up
to bookmark
2. Enter
List Mode
2. Select item
Press number button for
enter the number of page
Save
1. Select item
2. Setting or Adjust
3ET 5P
!UTO 0ROGRAM
%DIT ꢃ -ANUAL
,ANGUAGE
6IDEO ꢁ ꢂ 3ETTING
!PPEARANCE
ꢀ
ꢀ
ꢀ
• Recall your favourite page by press the colour button.
6IDEO
3IZEꢁꢂ
OK
4ELETEXT ,ANGUAGE
($-) 3ETTING
0# 3ETTING
ꢀ
ꢀ
ꢀ
Hold the current page.
• Cancel by press this button again.
3. Set
Hold
Reveal
Size
Switch between video and component signal
(Video / Component)
Video - 1 Setting
HDMI Setting
Display hidden information.
• Example : answer to a quiz, etc.
Setting for HDMI input
ꢁ
($-) 3ETTING
Size
:Normally set to “Auto.” If wrong screen size
appears in 480p (525p), change to “1” or “2”
Audio :Normally set to “Auto.” If no sound, change to
“Analogue” or “Digital.”
Mode :If no picture, change to “1” or “2”.
($-) ꢀ
3IZE
!UDIO
-ODE
!UTO
$IGITAL
ꢀ
Double the size of the displayed text.
($-) ꢂ
3IZE
!UTO
ꢀ
-ODE
($-) ꢃ
3IZE
!UTO
ꢀ
-ODE
Returns to page “100” or a previously
designated page.
Index
Cancel
Setting for PC input
PC Setting
>
PC Setting
>
1. Select PC Position
1. Adjust
PC Position
Phase
Leave the current page open, while you switch
to watch TV.
• Useful when running a page search.
Pixel
OK
OK
2. Enter
2. Set
Display the number of Sub-page.
• Cancel by press this button again.
PC Position : Adjust screen position.
Phase :Sets the focus of screen.
Sub-page
Pixel :Adjusts the horizontal feature of screen.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Poor picture quality
Page
P. 7
Severe noise or snow
Page
P. 4
P. 4
--
Unnatural colour >> Adjust “Colour” and “Backlight”
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
Patterns, stripes or noise
Check “Colour System”. If “Auto” is selected
select the specific colour system manually.
Noise >> Set to the following functions.
Picture Mode : Standard
DigiPure : On
P. 8
P. 7
P. 8
Interference caused by devices such as an amplifier, personal computer,
or a hair drier, Move it away from TV.
--
--
Dull picture >> Set to the following functions.
Picture Mode : Bright
Ghosting ( Doubling of images )
P. 7
P. 8
Interference occurs caused by signal reflection from mountains or
building. Try to adjust the aerial’s direction or use another antenna.
DigiPure
Poor sound
Adjust the “Bass” and “Treble”.
: On
Cannot turn it on
P. 9
P. 9
P. 6
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
--
--
■
If receiving a poor signal in “Stereo/I II” switch to “Mono”.
Adjust the channel reception using “Manual”.
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
For HDMI signal, wrong screen size in 480p (525p).
Switch “Size” in “HDMI Setting” to “1” or “2”.
P. 12
--
For HDMI signal, green and distorted screen
Remote control stops working
Wait a little for the signal to stabilize when switching the signal format
for an “HDMI” device.
Unplug TV, several minutes later plug it in again.
Side control buttons do not work
Switch “Child Lock” to “Off”.
--
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
P. 11
P. 8
P. 5
P. 12
Aspect ratio changed unintentionally
Press “ ZOOM ” button to return to your settings.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices,
or “Analogue” or “Auto” for DVI devices.
PC screen alignment is off
Some functions do not work.
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
Switch “Blue Back” to “Off”.
P. 12
P. 11
It is not a malfunction. Some functions (dark background) in the menu
do not work depending on the situation.
--
--
Black or white dots appear on the screen.
LCD panels use fine dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting
of the external device to 625i (interlace-scanning)
--
--
No picture, No sound
Some input do not output from OUT terminal.
--
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical information
Language group for Teletext
PC Signals that can be displayed
•
If the signal doesn’t appear, check that the vertical frequency on the
PC is set to “60Hz”.
Group
Group-1
Languages
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
Resolution
640 x 480(VGA) / 1024 x 768(XGA)
60.0
Group-2
Group-3
Group-4
Group-5
Group-6
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish, Finnish
Vertical frequency (Hz)
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian,
Slovenian, Czech, Slovak, English, German
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear
SD mode resolves disadvantage for better picture quality.
Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English, German
• If the characters are unreadable. ꢀ Select different Teletext language
group. (P. 6)
Sound and Colour system in your country or region
Area
Country or Region
System System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore,
Thailand, India, etc.
B/G
No use "Clear SD"
Use "Clear SD"
PAL
D/K
China, Vietnam, etc.
Asia, Middle East
Hong Kong, etc.
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
B/G
M
SECAM
NTSC
SECAM
D/K
Connect “DVI” devices
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
B/G
PAL
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
HDMI-1.
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 12)
• HDMI-2 and HDMI-3 input does not support analogue sound (IN HDMI-1).
• HDMI-2 and HDMI-3 input does not support DVI devices.
I
B/G
I
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
B/G
Egypt, Morocco, etc.
SECAM
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CH / CC List
To use the Insert function (P. 6), find the “CH/CC” number corresponding to the TV’s channel number from this table.
US:
CCIR:
OIRT:
The US channel numbers are the channel numbers used in the United States, Philippines, etc.
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
K
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
Channel
CH
L
US
CCIR
OIRT
AUSTRALIA
AU-0
M
CH 02
US-02
US-03
US-04
US-05
US-06
US-07
US-08
US-09
US-10
US-11
US-12
US-13
E2
R1
N
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
E3
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
O
E4
R2
R6
R7
R8
R9
P
E5
Q
E6
R
E7
S
E8
T
E9
U
E10
E11
E12
R10
R11
R12
AU-10
AU-11
V
W
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
Channel
CC
US
CCIR
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
S-1
S-2
S-3
S-4
S-5
S-6
AU-5A
S-7
S-8
S-9
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
S-18
S-19
S-20
S-21
S-22
S-23
A
B
C
D
E
F
G
H
I
X
Y
R3
R4
R5
Z
AU-3
AU-4
Z+1
Z+2
A-5
A-4
A-3
A-2
A-1
J
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Main unit
Terminals / Connectors
Model
LT-32EX19
LT-32BX19
Terminal name
Terminal type
Signal type (IN)
Signal type (OUT)
Broadcasting systems
Colour systems
B / G / I / D / K / M
PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz
Composite video, Analogue
component 576i (625i) / 480i
(525i),
Channels and frequencies
VHF low channel (VL) = 46.25 to 140.25 MHz
VHF high channel (VL) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41).
Progressive : 576p (625p) /
480p (525p),
HD : 1080i (1125i), 720p
(750p) / 1080p (1125p)
Audio L / R
VIDEO-1
RCA connectors x 6
Sound-multiplex systems
Teletext systems
NICAM (I / B / G / D / K), A2 (B / G / D / K)
FLOF (Fastext), WST (World System Teletext)
AC 110 V - 240 V, 50/60Hz
Composite video, Audio L / R
VIDEO-2
RCA connectors x 3
Input
terminals
HDMI
HDMI-1
Power requirements
576i (625i) / 480i (525i)
HDMI-2
HDMI connector x 1 / 576p (625p) / 480p (525p),
720p (750p) / 1080p (1125p) /
1080i (1125i)
Audio output
(Rated power output)
6 W + 6 W
6 W + 6 W
HDMI-3
Speakers
(4 cm x 16 cm) x 2
(4 cm x 16 cm) x 2
IN HDMI -1
PC INPUT
PC AUDIO
RCA connectors x 2 Audio L/R
Power consumption
[standby]
131 W
[1.8 W]
107 W
[1.8 W]
Analogue PC signal
D-SUB (15 pins) x 1
Screen size
(visible area size measured
diagonally
Audio
PC-IN (3.5 pinjack) x 1
80 cm
80 cm
Composite video,
Audio L / R
MONITOR OUT RCA connectors x 3
Output
terminals
Dimensions
(W x H x D: mm
[without stand]
791 x 571.7 x 230.5
[791 x 520.5 x 103.9]
869 x 548 x 230.5
[869 x 496.4 x 103.9]
Stereo mini-jack x 1
Headphone
Headphone
output
(3.5 mm in diameter)
Weights
[without stand]
12.5 kg
[11.5 kg]
12.5 kg
[11.5 kg]
• We may change the design and specifications without notice.
• HDMI, the HDMI Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Accessories
Remote control unit : RW-C2020 x 1
AAA/RO3 dry cell battery x 2
Screw x 4
© 2009 Victor Company of Japan, Limited
0309NWT-NF-MT
Download from Www.Somanuals.com. All Manuals Search And Download.
|