JVC VCR HR J245EK User Manual

S EE  
QUICK S ET UP GUIDE  
ON REAR S IDE  
VIDEO CASSETTE RECORDER  
CONTENTS  
SAFETY FIRST  
2
Safety Precautions ...................... 2  
Some Do's And Don'ts ............... 3  
HR-J 6 4 5 EK  
HR-J 6 4 5 ES  
HR-J 2 4 5 EK  
HR-J 2 4 6 EK  
(Hi-Fi)  
INSTALLING YOUR NEW RECORDER 4  
Basic Connections ...................... 4  
(Hi-Fi)  
INITIAL SETTINGS  
6
Video Channel Set ...................... 6  
Auto Set Up ............................... 8  
Video Plus+ Setup .................... 10  
(Monaural)  
(Monaural)  
PLAYBACK  
12  
Basic Playback ......................... 12  
Playback Features..................... 13  
RECORDING  
18  
Basic Recording ....................... 18  
Recording Features ................... 19  
B.E.S.T. Picture System ............. 20  
TV/VCR  
(MONITOR)  
TV  
DISPLAY  
2
1
4
7
3
6
TIMER RECORDING  
22  
5/ADD TIME  
8/DAILY  
0/AUX  
CANCEL  
/C.RESET  
/
9/WEEKLY  
Video Plus+ Timer Recording ... 22  
Regular Timer Programming ..... 24  
PROG CHECK  
4
TIMER  
2
E
XPRESS PRO RAMMING  
G
START  
STOP  
DATE  
TV PROG  
1
REW  
3PLAY REW  
¡
8PAUSE  
¢
REC  
7STOP  
EDITING  
Edit To Or From Another Video  
28  
TV VOL+  
PROG  
1
/MENU  
4
3
OK  
C.MEMORY  
¢ INDEX  
¢
TV VOL–  
PUSH JOG  
STANDBY/ON  
TV PROG  
Recorder .................................. 28  
Edit From A Camcorder ............ 30  
Press and hold TV button while pressing  
TV PROG. –, TV VCR  
,
+
/
/
q
COUNTER  
RESET  
TIMER  
SP/ LP  
¡
1
SYSTEM CONNECTIONS  
Connection To A Stereo System  
31  
The recorder illustrations appearing in this instruction manual are  
of the HR-J645EK.  
(HR-J645EK/ES only) ................. 31  
Connection To A Satellite  
Receiver ................................... 32  
TM  
SPECIAL FEATURES  
TUNER SET  
34  
36  
PAL  
Auto Channel Set ..................... 36  
Manual Channel Set ................. 38  
CLOCK SET  
44  
46  
48  
49  
50  
TROUBLESHOOTING  
QUESTIONS AND ANSWERS  
SPECIFICATIONS  
INDEX  
INS TRUCTIONS  
LPT 0002-055B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4-STEP QUICK SET UP  
1
2
3
4
BASIC  
CONNECTIONS  
VIDEO  
CHANNEL SET  
VIDEO PLUS+  
SETUP  
AUTO SET UP  
PAGE 4  
PAGE 6  
PAGE 8  
PAGE 10  
So m e Do 's An d Do n 'ts O n Th e Sa fe  
Use O f Eq u ip m e n t  
This equipment has been designed and manufactured to meet international safety standards but, like any  
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.  
DO read the operating instructions before you attempt to use the equipment.  
DO ensure that all electrical connections (including the mains plug, extension leads and interconnec-  
tions between pieces of equipment) are properly made and in accordance with the manufacturer's  
instructions. Switch off and withdraw the mains plug when making or changing connections.  
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equip-  
ment.  
DO be careful with glass panels or doors on equipment.  
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is  
damanged in any way — switch off, withdraw the mains plug and consult your dealer.  
DON'T remove any fixed cover as this may expose dangerous voltages.  
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is de-  
signed for unattended operation or has a standby mode. Switch off using the switch on the  
equipment and make sure that your family knows how to do this. Special arrangements may need  
to be made for infirm or handicapped people.  
DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements  
of road safety. It is illegal to watch television whilst driving.  
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.  
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheat-  
ing will cause damage and shorten the life of the equipment.  
DON'T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always  
fit the manufacturer's approved stand or legs with the fixings provided according to the instruc-  
tions.  
DON'T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL...  
NEVER let anyone especially children push anything into holes, slots or any other opening in the  
case — this could result in a fatal electrical shock;  
NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than  
sorry!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING YOUR NEW RECORDER  
4
Ba sic Co n n e ctio n s  
Back of TV  
RF Cable (provided)  
21-pin SCART Cable (not provided)  
Aerial connector  
21-pin AV input connector (SCART)  
It's essential that your video recorder be properly connected.  
Follow these steps carefully. THESE STEPS MUST BE COM-  
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-  
FORMED.  
Mains Power  
Cord  
CHECK CONTENTS  
Make sure the package contains all of the accessories  
listed in “Specifications” (pg. 49).  
1
SITUATE RECORDER  
Place the recorder on a stable, flat surface.  
2
CONNECT RECORDER TO  
TV  
The connection method you use depends on the type of  
TV you have.  
Mains outlet  
3
RF CONNECTION  
To Connect To A TV With NO 21-pin AV input  
connector (SCART) . . .  
a– Disconnect the TV aerial cable from the TV.  
b– Connect the TV aerial cable to the ANT. IN jack  
on the rear panel of the recorder.  
c– Connect the provided RF cable between the RF  
OUT jack on the rear panel of the recorder and the  
TV’s aerial connector.  
CONNECT RECORDER TO  
MAINS  
Before operating the recorder, make sure the TV’s  
channel is set to the VIDEO channel (pg. 6).  
Plug the end of the mains power cord into a mains  
outlet.  
AV CONNECTION  
To Connect To A TV with 21-pin AV input connector  
(SCART) . . .  
a– Connect the aerial, recorder and TV as per “RF  
CONNECTION”.  
b– Connect an optional SCART cable between the  
AV1 IN/OUT socket on the rear panel of the  
recorder and the TV’s 21-pin AV input connector  
(SCART).  
4
Before operating the recorder, make sure the TV is set to  
the VIDEO (or AV) mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
TV Aerial Cable (not provided)  
ANT. IN  
R
L
AUDIO OUT  
AV1 IN/OUT  
AV2 IN  
RF OUT  
Back of HR-J645EK/ES  
Back of HR-J245EK/J246EK  
AV2 IN  
AV1 IN OUT  
ATTEN TIO N  
If you have finished all the necessary connections, go to "Video Channel Set" on page 6, then  
perform Auto Set Up on page 8; do NOT press the button on the recorder/remote control  
to turn on the recorder's power before you start Auto Set Up.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETTINGS  
6
If you have connected the video recorder to your TV  
via the provided RF cable only (RF connection) – Go to  
"With RF Connection" below.  
Vid e o  
If you have connected the video recorder to your TV  
via both the provided RF cable and a 21-pin SCART  
cable (AV connection) – Go to "With AV Connection"  
on next page.  
Ch a n n e l Se t  
IMPORTANT:  
Video Channel (RF Output Channel) is the channel on  
which your TV receives picture and sound signals from the  
video recorder through the RF cable.  
Before performing the following steps, make sure the  
recorder's power is off and there is no cassette inserted in  
the recorder.  
W ith RF Co n n e ctio n  
4
ACCESS VIDEO CHANNEL SET  
MODE  
Hold down STOP on the recorder until the display  
¢
¢
panel shows the following.  
q
1
¡
1
SET VIDEO CHANNEL  
1
Set your TV to UHF channel 52.  
2
If the two vertical white bars appear clearly on the  
screen as shown in the illustration at bottom left, go  
to step 3.  
If the two vertical white bars do not appear clearly,  
press TV PROG.+ or to set the video recorder to a  
vacant channel between 22 and 69 which is not  
occupied by any local station in your area.  
2
4
1
2
5
8
0
3
6
(Ex.) If channel 36 is available in your area  
4
7/  
9
Then set your TV to UHF channel 36 and check if the  
two vertical white bars appear clearly on the screen; if  
so, go to step 3. If not, re-set the video recorder to  
another vacant channel and try again.  
4
2
TV PROG.  
2
N O TES:  
1
3
7
¡
¢
If you set the video recorder to a channel which is  
occupied by a local station or has neighbouring  
channels that are occupied by local stations, the  
picture reception quality will be affected and some  
interference noise will appear on the TV screen. Be  
sure to select a vacant channel which has no  
broadcast on neighbouring channels.  
8
1
4
3
If you cannot obtain the two vertical white bars  
clearly with any channel between 22 and 69, consult  
your JVC dealer.  
OK  
3
EXIT VIDEO CHANNEL SET MODE  
TEST SIGNAL  
Press OK.  
3
The channel on which the screen to  
the left appear clearly in step 2 is  
your Video Channel.  
TURN OFF THE RECORDER  
Press  
.
4
To view picture signals from the video recorder, set  
your TV to the Video Channel.  
After you finish this step, go to "Auto Set Up" on  
page 8.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
IMPORTANT:  
4
Before performing the following steps, make sure the  
recorder's power is off and there is no cassette inserted in  
the recorder.  
W ith AV Co n n e ctio n  
¢
¢
q
¡
1
ACCESS VIDEO CHANNEL  
SET MODE  
Hold down STOP on the recorder until the display  
1
panel shows the following.  
1
2
2
SET VIDEO CHANNEL  
Press TV PROG. – until the display panel shows  
– –  
" OUT ".  
4
1
2
5
8
0
3
6
4
7/  
9
Now the video channel is set to off.  
4
EXIT VIDEO CHANNEL SET  
2
MODE  
TV PROG.  
2
Press OK.  
1
3
7
¡
¢
3
4
8
TURN OFF THE RECORDER  
1
4
Press  
.
3
OK  
3
To view picture signals from the video recorder, set  
your TV to its AV mode.  
After you finish this step, go to "Auto Set Up" on  
page 8.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETTINGS (cont.)  
8
The Auto Set Up function sets the tuner channels, clock and  
Video Plus+ assigned Guide Program numbers automatically  
when the  
button on the recorder/remote is first pressed to  
power on the recorder after you plug the mains power cord into  
a mains outlet.  
Au to Se t Up  
Au to Ch a n n e l Se t/ Au to  
Clo ck Se t/ Au to Gu id e  
Pro g ra m N u m b e r Se t  
Before starting the following procedure, make sure that the TV  
aerial cable is connected to the recorder and that the recorder's  
mains power cord is connected to a mains outlet (pg.4).  
PERFORM AUTO SET UP  
1
Press  
on the recorder or remote control.  
"Auto" appears on the display panel and blinks; do  
NOT press any button on the recorder or remote  
control until the display panel shows the current  
time or "CH1" or "--:--". (Refer to box on page 9.)  
1
¢
¢
q
¡
1
Auto channel set function takes place first; it assigns  
automatically all receivable stations in your area.  
Auto clock set function sets the clock automatically.  
During auto channel set, the recorder recognizes each  
station name of the detected stations and stores them  
in the recorder's memory, then automatically sets  
Video Plus+ assigned Guide Program number for  
those stations according to the broadcast area.  
N O TES:  
If the TV power is on and its  
VIDEO channel or AV mode  
is selected during Auto Set  
Up, the AUTO SET screen  
will appear. As Auto Set Up  
progresses, the " " mark on  
the screen moves from left  
to right.  
1
AUTO SET  
1
2
5
8
0
3
6
PLEASE WAIT  
4
7/  
9
+
+
+
0
4
If there is a power cut, or if  
[MENU] : EXIT  
you press  
or MENU  
2
while Auto Set Up is in  
progress, Auto Set Up will  
Beginning  
End  
TV PROG.  
be interrupted; be sure to turn off the recorder power once and  
press to turn the power back on to re-start Auto Set Up.  
1
3
7
¡
¢
8
1
4
ATTEN TIO N  
Once you have performed Auto Set Up, even if the  
recorder's memory backup has expired, all the stored  
stations and their Guide Program numbers remain in the  
recorder's memory and the recorder will not perform Auto  
Set Up again. You only need to set the clock. (pg. 44)  
If you have moved to a different area, perform each setting  
as required.  
Tuner setting pg. 36  
Clock setting pg. 44  
Video Plus+ Guide Program number setting pg. 10  
If a new station starts broadcasting in your area, perform  
both tuner setting (pg. 36) and Video Plus+ Guide  
Program number setting (pg. 10).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Au to Se t Up re su lts a p p e a r o n th e d isp la y p a n e l  
When both auto channel set and auto clock set have been  
completed successfully the correct current time will be  
displayed.  
When auto channel set has been completed successfully  
but auto clock set has not, "CH" will be displayed.  
When neither auto channel set nor auto clock set has been  
completed successfully, "--:--" will be displayed.  
* See "Video Plus+ Setup" on page 10 to check if the Guide Program numbers have been set correctly.  
If b o th a u to ch a n n e l se t a n d a u to clo ck se t h a ve b e e n p e rfo rm e d su cce ssfu lly :  
1 Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the  
recorder's memory by using the TV PROG. button(s).  
If station names (ID — pg. 42) have also been stored in the recorder's memory, the station name will be displayed at the  
top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.  
If you want to set the tuner manually such as to add or skip channels, to change preset positions, or to set or change station  
names, see pages 38 – 41.  
2 Perform "Video Plus+ Setup" on page 10 to check if the Guide Program numbers have been set correctly.  
If a u to ch a n n e l se t h a s su cce e d e d b u t a u to clo ck se t h a s n o t:  
1 Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the  
recorder's memory by using the TV PROG. button(s).  
If station names (ID — pg. 42) have also been stored in the recorder's memory, the station name will be displayed at the  
top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.  
If you want to set the tuner manually such as to add or skip channels, to change preset positions, or to set or change station  
names, see pages 38 – 41.  
2 Perform "Clock Set" on page 44, then "Video Plus+ Setup" on page 10 to check if the Guide Program numbers have been set  
correctly.  
If b o th a u to ch a n n e l se t a n d a u to clo ck se t h a ve fa ile d :  
1 Make sure the TV aerial cable is connected properly to the recorder and turn off the recorder power once, then turn the  
recorder power back on again.  
The recorder will try Auto Set Up again.  
IMPO RTAN T  
Depending on the reception conditions, the station names may not be stored correctly, and auto Guide Program Number Set may  
not work properly. If the Guide Program numbers are not set properly, Video Plus+ timer recording (pg. 22) will not work  
correctly; be sure to check if the Guide Program numbers have been set correctly  
(pg.10, "Video Plus+ Setup").  
Since your video recorder memorizes all detected stations even if the reception condition is poor, some of those stored stations  
may produce a noisy picture. To delete those stations, "Delete A Channel" on page 39.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETTINGS (cont.)  
10  
With Video Plus+, timer programming is greatly simplified  
because each TV programme has a corresponding code number  
which your recorder is able to recognise.  
Vid e o Plu s+  
Se tu p  
N O TE:  
“Guide Program (GUIDE PROG.) number" refers to the assigned  
TV station numbers, according to broadcast area, for Video  
Plus+ timer recording.  
Turn on the TV and select the VIDEO channel (or AV mode).  
IMPO RTAN T  
Perform the following procedure after Auto Set Up on page 8  
and/or the channel setting steps on pages 36 – 41, and after the  
Clock Set procedure on page 44.  
After setting the Guide Program numbers, the station names and  
preset positions may be incorrect if you stored or skipped  
channels. In this case, re-perform Guide Program number  
setting.  
1
2
5
8
0
3
6
Perform the following steps to check if the Guide Program  
numbers have been correctly set during Auto Set Up or Auto  
Channel Set, and make corrections if necessary.  
4,5  
4
NUMBER  
7/  
9
CANCEL  
Gu id e Pro g ra m N u m b e r Se t  
4
2
MAKE LIST OF STORED  
STATION NAMES AND  
PRESET POSITIONS  
TV PROG.  
1
3
7
¡
¢
(Ex.)  
Preset position  
Station name  
8
1
2
3
4
5
BBC1  
2,6  
1
1
4
BBC2  
MENU  
PUSH JOG  
3
ITV  
OK  
3,5  
CH4  
3,4,5  
CH5  
ACCESS MAIN MENU  
SCREEN  
Press MENU twice.  
2
3
ACCESS GUIDE PROG SET  
SCREEN  
(pointer) to "GUIDE PROG SET", then press OK.  
The Guide Prog. Set screen appears.  
IMPO RTAN T  
As Channel 5 has started its service on March 30th 1997,  
the Guide Program Numbers of some stations have been  
changed as follows:  
Press PUSH JOG % to move the highlight bar  
Guide Program Number  
Station Name  
MAIN MENU  
MODE SET  
GUIDE PROG SET  
Before  
Now  
AUTO CH SET  
MANUAL CH SET  
GUIDE PROG SET  
CLOCK SET  
CHANNEL 5  
5
5
6
7
GUIDE PROG  
TV PROG  
1
1
RTE1 (IRELAND)  
NETWORK 2 (IRELAND)  
: AUTO SET BY  
VIDEO PLUS+  
]: MANUAL SET  
6
[
[
[5 ] =  
5
] : ?  
For details, you can consult the JVC Customer Liaison at:  
0181-208-7654  
[MENU] : EXIT  
[MENU] : EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
W h e n Usin g A Sa te llite  
Re ce ive r An d / O r Ca b le  
Sy ste m  
ENTER PLUSCODE NUMBER  
Press OK, and a cursor  
GUIDE PROG SET  
appears above “GUIDE  
PROG”. Then, using the  
12345  
4
NUMBER keys, input the  
PlusCode number (found  
in most TV listings) of a  
program scheduled to be  
broadcast on each station  
on the list from step 1,  
GUIDE PROG  
1
TV PROG  
1
THE SATELLITE RECEIVER IS SHOWN CONNECTED TO THE  
AV2 IN(SCART) CONNECTOR AND THE CABLE SYSTEM  
CONNECTED VIA THE AERIAL SOCKET AND TUNED TO,  
FOR EXAMPLE, PRESET POSITION 6 ON YOUR TV.  
[0-9] =  
[MENU] : EXIT  
Satellite Antenna  
Cable  
starting at the top. If you  
enter the wrong number, press  
CANCEL to backspace and  
input the correct number.  
When entering a  
PlusCode for BBC 2  
Satellite  
Receiver  
CONFIRM PRESET  
Cable  
system  
POSITION NUMBER  
under “TV PROG” begins  
blinking.  
Press OK and the display  
4
GUIDE PROG SET  
5
GUIDE PROG  
2
TV PROG  
2
If the blinking number  
under “TV PROG” agrees  
with the preset position . . .  
. . . press OK.  
If the numbers do not  
agree . . .  
5
[
] =  
[MENU] : EXIT  
. . . input the preset  
position using PUSH JOG% or the NUMBER keys,  
then press OK.  
Back of  
HR-J645EK/ES  
If you input the PlusCode number of a program that  
has already aired, “ERRORappears on screen for a  
few seconds. Input the correct PlusCode number.  
Repeat steps 4 and 5 as necessary.  
Back of HR-J245EK/J246EK  
TV Receiver  
CLOSE MENU  
Press MENU and selection is complete.  
6
If you already know the Guide Program number for a station . . .  
1– After step 3, press PUSH JOG  
.
The GUIDE PROG number begins blinking.  
2– Enter the Guide Program number using the NUMBER keys  
or PUSH JOG% , then press PUSH JOG  
.
The TV PROG number begins blinking.  
3– Enter the preset position using the NUMBER keys or  
PUSH JOG% , then press PUSH JOG  
.
Repeat 2 and 3 as necessary.  
4– Press MENU.  
N O TES:  
If you own a satellite receiver, connect it to the AV2 IN  
connector on the back of the recorder. Then, in step 5 above,  
set the input mode to "AUX2" by pressing NUMBER key "0" or  
TV PROG. +/–.  
If you’re receiving broadcasts via a cable box through preset  
“6” (example) on your recorder, set “TV PROG” for “6” in  
step 5.  
After selecting the programme you wish to record from your  
cable system or satellite receiver, set the systems timer — if  
your cable or satellite receiver does not have a timer, leave it  
switched on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK  
12  
The easiest, most basic operation possible with your video  
recorder is tape playback. Already-recorded signals on a video  
tape are read by your video recorder and displayed on your TV  
just like a TV programme.  
Ba sic  
Pla y b a ck  
LOAD A CASSETTE  
Make sure the window side is up, the rear label side is  
facing you and the arrow on the front of the cassette is  
1
point toward the recorder. Dont apply too much  
pressure when inserting.  
Turn on the TV and select the VIDEO channel (or AV mode).  
The recorder power comes on automatically and the  
counter is reset to 0:00:00.  
If the record safety tab has been removed, playback  
begins automatically.  
3
FIND PROGRAMME START  
POINT  
4
If the tape is advanced past the start point, press REW.  
1
To go forward, press FF.  
¢
¢
2
3
q
¡
1
START PLAYBACK  
Press PLAY. “BEST” appears blinking in the recorder's  
display panel during automatic tracking (pg. 20).  
Playback picture quality of LP recordings will not be  
as high as SP recordings.  
2
2
STOP PLAYBACK  
Press STOP on the remote or STOP/EJECT on the  
recorders front panel. Then press STOP/EJECT to  
remove the cassette.  
4
1
2
5
8
0
3
6
4
Usable cassettes  
7/  
9
4
2
3
1
3
7
¡
FF  
2
REW  
2
8
1
4
¢
Compact VHS camcorder recordings can be played on  
this video recorder. Simply place the recorded cassette  
into a VHS Cassette Adapter and it can be used just like  
any full-sized VHS cassette.  
This video recorder can record on regular VHS and  
Super VHS cassettes. However, it will record and play  
back regular VHS signals only. It is not possible to play  
back a recorded Super VHS tape.  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Take advantage of special functions possible with the recorders  
controls or the remote control.  
Pla y b a ck  
Fe a tu re s  
Hig h -Sp e e d Se a rch  
ACTIVATE HIGH-SPEED  
SEARCH  
During playback or still, press FF for forward high-  
speed search, or REW for reverse high-speed search.  
1
For short searches, press and hold FF or REW for over  
2 seconds. When released, normal playback resumes.  
To resume normal playback, press PLAY.  
¢
¢
q
¡
1
PAUSE  
Still Picture / Fra m e -By-Fra m e  
Pla yb a ck  
PAUSE DURING PLAYBACK  
Press PAUSE. If there is vertical jitter, use the TV PROG.  
buttons to correct the picture.  
8
0
7
/
9
1
4
ACTIVATE FRAME-BY-FRAME  
2
PLAYBACK  
TV PROG.  
Press PAUSE again.  
1
3
7
¡
¢
OR  
FF  
2
REW  
Press PUSH JOG or  
.
8
PAUSE  
To resume normal playback, press PLAY.  
1
4
PUSH JOG  
3
Slo w Mo tio n  
ACTIVATE SLOW-MOTION  
PLAYBACK  
During still picture, press and hold PAUSE for 2  
seconds, then release. Press and release again to return  
1
to still picture.  
OR  
During still picture, press and hold PUSH JOG or  
Release to return to still picture.  
.
Va ria b le -Sp e e d Se a rch  
ACTIVATE VARIABLE-SPEED  
SEARCH  
To resume normal playback, press PLAY.  
During playback, press PUSH JOG or  
.
The more times you press, the faster the playback  
picture moves.  
To decrease speed, press the button for the opposite  
direction.  
1
To resume normal playback, press PLAY.  
N O TE:  
In the search, still, or frame by frame playback mode, the  
picture may be distorted, and there may be a loss of colour.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK (cont.)  
14  
Ma n u a l Tra ck in g  
Your video recorder is equipped with automatic tracking  
control. During playback, you can override this and adjust the  
tracking manually by pressing the TV PROG. buttons.  
¢
¢
q
¡
1
OVERRIDE AUTOMATIC  
TRACKING  
Press  
on the remote to engage manual tracking.  
1
2
3
ADJUST TRACKING  
MANUALLY  
Press TV PROG. + or to adjust tracking.  
1
2
5
8
0
3
6
REVIEW  
4
RETURN TO AUTOMATIC  
TRACKING  
7/  
9
4
Press  
on the remote to re-engage automatic  
tracking.  
2
TV PROG.  
N O TE:  
1
3
7
¡
¢
When a new tape is inserted, the recorder enters the automatic  
tracking mode automatically.  
8
1
4
In sta n t Re Vie w  
3
Simply by pressing a single button, the recorder power comes  
on, rewinds, and begins playback of the last timer-recorded  
programme. If you have several programmes recorded, you can  
easily access any of them.  
N O TE:  
Before starting, make sure that the recorder is off and that the  
Timer mode is disengaged.  
ACTIVATE INSTANT  
REVIEW  
Press REVIEW. The recorder power comes on and the  
recorder searches for the index code indicating the start  
1
of the last timer-recorded programme. Once its found,  
playback begins automatically.  
The front display panel tells you how many programmes  
have been recorded. If you have, for example, 3  
programmes, “REVIEW” and "3" appear and blink. To  
watch the first of the 3 programmes, press REVIEW three  
times. The recorder searches and begins playback  
automatically. You can access a programme as far as 9  
index codes away from the current tape position.  
N O TE:  
Instant ReView is not possible while the recorder is in the Timer  
mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
In d e x Se a rch  
Your recorder automatically marks  
index codes at the beginning of  
each recording. This function gives  
you quick access to any one of 9  
index codes in either direction.  
£ 2  
N O TE:  
1
2
5
8
0
3
6
Before starting, make sure the  
recorder is in the Stop mode.  
4
7/  
9
C. RESET  
ACTIVATE INDEX SEARCH  
4
Press PUSH JOG or (or £). “1” or  
£ 1” is displayed on screen and search begins in  
the corresponding direction.  
2
1
To access index codes 2 through 9, press PUSH JOG  
or repeatedly until the correct index number is  
displayed.  
1
3
7
¡
¢
FF  
REW  
8
Ex.: To locate the beginning of B from the current  
position, press PUSH JOG twice.  
STOP  
1
4
To locate the beginning of D from the current  
position, press PUSH JOG once.  
PUSH JOG  
3
Current position  
C.MEMORY  
A
B
C
D
E
F
–2  
–1  
1
2
3
Index number  
When the specified index code is located, playback  
begins automatically.  
Co u n te r Me m o ry  
Returns to the counter reading of “0:00:00” to conveniently find  
a specific place on the tape automatically.  
SET COUNTER MEMORY  
Press C. (COUNTER) RESET during playback at a point  
you wish to locate later. The counter reads “0:00:00”.  
1
2
Then press C.MEMORY, and “M” appears in front of the  
counter digits.  
ACTIVATE COUNTER  
MEMORY  
When you wish to return to the designated point, press  
STOP and then REW or FF.  
The tape rewinds or fast-forwards and stops at about  
0:00:00 automatically.  
To cancel Counter Memory, press C.MEMORY again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK (cont.)  
16  
Re p e a t Pla y b a ck  
Your video recorder can automatically play back the whole tape  
20 times repeatedly.  
¢
¢
q
¡
1
START PLAYBACK  
Press PLAY.  
1
ACTIVATE REPEAT  
PLAYBACK  
Press PLAY and hold for over 5 seconds, then release.  
1
2
5
8
0
3
6
The Play indicator ($) on the display panel blinks  
slowly.  
The tape plays 20 times automatically, and then  
stops.  
2
4
7/  
9
4
STOP PLAYBACK  
Press STOP at any time to stop playback.  
2
3
1
3
7
¡
¢
FF  
PAUSE  
REW  
N O TE:  
8
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.  
1
4
3
So u n d tra ck Se le ctio n (HR-J6 4 5 EK/ ES o n ly )  
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.  
During Playback  
Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows:  
N O TES:  
TRACK (On-Screen Display)  
USE  
"L + R" should normally be selected. In this mode, Hi-Fi  
stereo tapes are played back in stereo, and the normal  
audio track is played back automatically for tapes with  
only normal audio.  
For instructions on recording NICAM stereo and  
bilingual programmes, refer to page 35.  
Bilingual programmes are not currently broadcast in  
the U.K. and Ireland.  
HI FI  
For Hi-Fi stereo tapes  
L
L
R
HI FI  
HI FI  
For main audio of Bilingual tapes  
For sub audio of Bilingual tapes  
For audio-dubbed tapes  
R
"O.S.D." must be set to "ON" or the on-screen  
displays will not appear (pg. 34).  
NORM  
HI FI  
NORM  
For audio-dubbed tapes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
N e x t Fu n ctio n Me m o ry  
You can set your recorder's power to go off automatically after  
the tape is fully rewound. Before starting, make sure the  
recorder is in the Stop mode.  
For Automatic Power Off After Tape Rewind . . .  
. . . press REW, then press  
within 2 seconds.  
N O TE:  
1
2
5
8
0
3
6
If you want the power to be turned off automatically when the  
counter reads “0:00:00” (instead of at the beginning of the  
tape), press C.MEMORY so that the “M” mark appears before  
pressing REW.  
4
7/  
9
4
2
N TSC Pla y b a ck  
Your video recorder is equipped with NTSC circuitry that can  
play back NTSC tapes.  
1
3
7
¡
¢
REW  
8
LOAD A CASSETTE  
1
4
Insert a cassette recorded in NTSC.  
3
1
C.MEMORY  
START PLAYBACK  
Press PLAY.  
"NTSC" appears on the screen for about 5 seconds.  
2
Some TVs shrink the picture vertically and place  
black bars at the top and bottom of the screen. This is  
not a malfunction on the part of either the video  
recorder or the TV.  
The picture may roll up and down. This can be  
corrected using the V-HOLD control found on some  
TVs. (This cannot be corrected if the TV does not  
have a V-HOLD control.)  
The counter and tape remaining time readings will be  
incorrect.  
During search, still, or frame-by-frame playback, the  
picture will be distorted, and there may be a loss of  
colour.  
Depending on the type of TV, the top and bottom  
portions of superimposed displays may be cut off  
during NTSC playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING  
18  
TV signals being received by the recorders built-in tuner can be  
recorded onto a video tape. You can “capture” a TV programme  
using your video recorder.  
Ba sic  
Re co rd in g  
LOAD A CASSETTE  
Insert a cassette with the record safety tab intact.  
The counter is reset to 0:00:00 and the recorder  
power comes on automatically.  
1
Turn on the TV and select the VIDEO channel (or AV mode).  
CHOOSE A PROGRAMME  
Press TV PROG. +/– or the NUMBER keys to select the  
preset you wish to record.  
2
5
4
SET TAPE SPEED  
recorder display panel to confirm the selected tape  
speed.  
Press SP/LP (  
). Check the SP/LP indicator on the  
1
¢
¢
3
¡
1
Picture quality of LP recordings will not be as high as  
SP recordings.  
SP/LP  
3
START RECORDING  
Press and hold RECORD and PLAY on the remote  
5
control, or press RECORD on the recorder.  
4
2
6
B.E.S.T. takes place at the beginning of both the  
first SP and the first LP recording after inserting the  
cassette (pg. 20).  
PAUSE/ RESUME  
1
2
5
8
0
3
6
RECORDING  
4
2
3
Press PAUSE. Press PLAY to resume recording.  
NUMBER  
7/  
9
5
6
4
STOP RECORDING  
2
TV PROG.  
2
Press STOP on the remote control or STOP/EJECT on  
the recorder. Then press STOP/EJECT to remove the  
cassette.  
1
3
7
¡
¢
PLAY  
4,5  
8
PAUSE  
RECORD  
1
4
4
Accidental erasure prevention  
5
To prevent accidental recording on a recorded cassette,  
remove its safety tab. To record on it later, cover the hole  
with adhesive tape.  
3
6
Record safety tab  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Re co rd O n e Pro g ra m m e  
W h ile Wa tch in g An o th e r  
Re co rd in g  
Fe a tu re s  
SELECT PRESET TO WATCH  
Once recording is in progress, all you need to do is to  
set the preset controls on the TV for the station you  
wish to view.  
1
The programme selected with the TVs preset controls  
appears on the TV screen while the one selected with  
the recorder's TV PROG. buttons is recorded on the  
tape.  
¢
¢
Ela p se d Re co rd in g Tim e  
¡
1
In d ica tio n  
You can check the exact time of a recording.  
SET COUNTER DISPLAY  
Press DISPLAY until a counter reading appears on the  
dispay panel.  
1
RESET COUNTER  
Press C. (COUNTER) RESET before starting recording or  
playback.  
DISPLAY
2
2
5
8
0
3
6
The counter is reset to “0:00:00” and shows the exact  
elapsed time as the tape runs.  
4
7/  
9
C. RESET  
Insta nt Tim er Record ing (ITR)  
This easy method lets you record for from 30 minutes to 6 hours  
(selectable in 30-min. increments), and shuts the recorder off  
after recording is finished.  
4
2
TV PROG.  
1
3
7
¡
¢
START RECORDING  
Press RECORD on the recorder.  
8
1
4
1
3
ENGAGE ITR MODE  
Press RECORD again. " " blinks and 0:30 appears on  
the front display panel.  
2
Ta p e Re m a in in g Tim e  
SET RECORDING  
DURATION  
RECORD to extend the time. Each press extends  
recording time by 30 minutes.  
DISPLAY REMAINING TIME  
Press DISPLAY until the time remaining on the tape  
If you want to record for more than 30 minutes, press  
appears.  
1
By pressing the DISPLAY button, you can change the  
display to show the counter reading, preset position,  
clock time* or tape remaining time.  
3
* Preset position is not displayed during playback.  
N O TE:  
You can only perform ITR using the RECORD button on the  
N O TE:  
recorder's front panel.  
Depending on the type of tape used, there may be times when  
the tape remaining time reading may not appear right away, or  
is not correct. "- - : - -" may sometimes appear, or the display  
may blink on occasion.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING (cont.)  
20  
The B.E.S.T. (Biconditional Equalised Signal Tracking) system  
checks the condition of the tape in use during recording and  
playback, and compensates to provide the highest-possible  
recording and playback pictures. The default setting for both  
recording and playback is “ON”.  
B.E.S.T.  
Picture System  
Re co rd in g  
LOAD A CASSETTE  
Turn on the TV and select the VIDEO channel (or AV mode).  
Insert a cassette with the record safety tab intact.  
The recorder power comes on automatically.  
1
ACCESS MAIN MENU  
¢
¢
SCREEN  
q
Press MENU twice.  
¡
1
2
ACCESS MODE SET  
SCREEN  
Move the highlight bar  
MAIN MENU  
(pointer) to "MODE SET"  
by pressing PUSH JOG  
%fi, then press OK.  
MODE SET  
3
AUTO CH SET  
MANUAL CH SET  
GUIDE PROG SET  
CLOCK SET  
1
2
5
8
0
3
6
4
7/  
9
5
[
] =  
[MENU] : EXIT  
4
2
CONFIRM B.E.S.T. STATUS  
The default setting is  
MODE SET  
ON”. If this is the case,  
go to step 4. If not, press  
AUTO TIMER : OFF  
4
1
3
7
¡
¢
O. S. D.  
: ON  
: ON  
PUSH JOG to move the  
B. E. S. T.  
highlight bar (pointer) to  
“B.E.S.T.”, then press  
PUSH JOG to set to  
ON”.  
8
RECORD  
MENU  
OK  
1
4
[5 ] = [ ] : ON/OFF  
PUSH JOG  
3
[MENU] : EXIT  
RETURN TO NORMAL  
SCREEN  
Press MENU.  
5
6
START RECORDING  
RECORD on the recorder.  
Press and hold RECORD and PLAY on the remote, or  
The recorder spends approximately 7 seconds  
assessing the condition of the tape, then begins  
recording.  
When the "BEST" indicator begins blinking, that  
means adjustment is complete.  
Display Panel Indication  
Pressing the recorder's RECORD button while "BEST"  
is displayed does not start Instant Timer Recording  
(pg. 19).  
As the tape check progresses, the “– –” marks on the display  
panel increase upward. Once the "BEST" indicator starts  
blinking, the check is complete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
N O TES:  
The B.E.S.T. system works for both SP and LP modes only after  
a tape has been inserted and the Record mode is first  
initiated. It does not work during recording.  
In the case of timer recording, the B.E.S.T. system works  
before recording is initiated.  
Once the cassette is ejected, the B.E.S.T. data is cancelled.  
The next time the cassette is used for recording, B.E.S.T. is re-  
performed.  
¢
¢
¡
1
ATTEN TIO N :  
Since the B.E.S.T. system works before recording actually  
starts, there is a delay of approximately 7 seconds after  
RECORD and PLAY on the remote are pressed, or RECORD  
on the recorder is pressed. To make sure you record the  
desired scene or programme in its entirety, first perform the  
following steps:  
1) Press and hold PAUSE and RECORD to engage the  
RECORD PAUSE mode.  
The recorder then automatically checks the condition  
of the tape and, after approximately 7 seconds, re-  
enters RECORD PAUSE.  
1
2
5
8
0
3
6
2) Press PLAY to start recording.  
If you want to bypass the B.E.S.T. system and begin  
recording immediately, set “B.E.S.T.” to “OFF” in step  
4 on page 20.  
4
7/  
9
4
Pla y b a ck  
2
The recorder assesses the quality of the tape once you initiate  
playback. When watching a tape recorded with “B.E.S.T.” set to  
ON”, it is recommended that you leave B.E.S.T. on during  
playback as well.  
1
3
7
¡
¢
8
PAUSE  
RECORD  
START PLAYBACK  
1
4
Press PLAY.  
3
1
The recorder adjusts the playback picture quality  
based on the quality of the tape in use.  
B.E.S.T. is active during Auto Tracking. “BEST”  
appears blinking on the recorders display panel.  
N O TES:  
When watching a rental tape or one recorded on another  
video recorder, or when using this recorder as the player for  
editing, set B.E.S.T. to your preference by performing steps 2  
through 5 on page 20.  
"BEST" only appears at the beginning of automatic tracking.  
Even though it doesn't appear after that, the B.E.S.T. function  
is operative.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
22  
ACCESS TIMER PROGRAMMING  
SCREEN  
Vid e o Plu s+  
Tim e r  
Press PROG.  
TIMER PROGRAMMING  
1
2
[0 – 9] : VIDEO PLUS+  
Re co rd in g  
[+/–] : EXPRESS PROGRAMING  
[MENU] : MAIN MENU  
The front display panel looks like this:  
Before performing Video Plus+ Timer Recording:  
Be sure to read "Video Plus+ Setup" (pg. 10).  
Insert a cassette with the safety tab in place. The recorder  
will come on automatically.  
Turn on the TV and select the VIDEO channel (or AV mode).  
ENTER PLUSCODE NUMBER  
Press the NUMBER keys to  
VIDEO PLUS+  
12345678  
enter the PlusCode  
number of a programme  
you wish to record.  
If you make a mistake,  
press CANCEL to  
backspace and then  
input the correct number.  
1
2
5
8
0
3
6
[0 – 9] =  
2
[CANCEL] : DELETE  
[MENU] : EXIT  
4
The PlusCode number you  
enter appears on the front  
display panel:  
NUMBER  
7/  
9
CANCEL  
: PDC  
4
PROG. CHECK  
2
The display panel can show only a 4-digit number.  
ACCESS VIDEO PLUS+ PROGRAM  
SCREEN  
1
3
7
¡
¢
Press OK, and the Video  
8
P1 –  
Plus+ Program screen  
appears (if you’re just  
starting out, “P1” appears).  
VIDEO PLUS+ 123456789  
START  
21:00  
STOP  
22:00  
1
3
4
=
PROG.  
1
3
3
SP  
ON  
The display panel shows  
the programme start time.  
Pressing PROG CHECK  
changes the display to the  
programme stop time, then  
the date and preset  
OK  
DATE  
25.12  
TV PROG  
1
BBC 1  
: OK  
position.  
SP  
PDC Re co rd in g  
IMPORTANT  
Now available from some TV stations, PDC (Programme  
Delivery Control) is a service designed to assure safe,  
accurate timer recording. With this system, special code  
signals are transmitted together with the audio/video  
signals. These code signals control your video recorder and  
have precedence over advertised times you preset in the  
timer. This means that your recorder will start and stop  
recording when the preset TV programmes actually start  
and end — even if the broadcast time of a preset TV  
programme is changed.  
Be sure to confirm the setting of PDC recording.  
If "  
on the display panel, PDC is set to ON.  
If " OFF" is displayed on the screen or "  
not lit on the display panel, PDC is set to OFF.  
ON" is displayed on the screen or "  
" is lit  
" is  
To change the setting, press  
"7").  
"PDC Recording" in the left column.  
: PDC (NUMBER key  
Make sure the preset position number you wish to  
record is displayed; if not, see "Video Plus+ Setup" on  
page 10 and set the Guide Program number for that  
PlusCode number correctly.  
If the number you entered is invalid, "ERROR"  
appears on the screen and "Err" appears on the  
display panel. Press CANCEL to backspace and input  
a valid PlusCode number.  
N O TES:  
PDC Recording is also possible when a satellite receiver  
or a cable system is connected to AV2 IN on your  
recorder.  
PDC recording is also possible via the AV1 IN/OUT  
connector.  
If "ERROR=GUIDE PROG" appears on the screen, see  
"ATTENTION – Regarding Guide Program Number  
Set" on page 23.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
SET TAPE SPEED  
Press SP/LP (  
) to set the tape speed.  
6
4
5
6
RETURN TO NORMAL SCREEN  
¢
¢
Press OK.  
q
Repeat steps 1 5 for each additional programme.  
¡
1
ENGAGE RECORDER’S TIMER MODE  
Press TIMER. The recorder turns off automatically.  
4
N O TE:  
To Delay The Stop Time . . .  
. . . press ADD TIME after pressing OK in step 3. Each time you  
press, the Stop time is delayed by 5 minutes (meaning that 5  
minutes of recording time is added). You can easily compensate  
for anticipated programme schedule delays this way.  
1
5
8
0
3
6
To Timer-Record Weekly Or Daily Serials . . .  
4
. . . after pressing OK in step 3, press WEEKLY (NUMBER key  
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily  
serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears  
on the screen. Pressing the button again makes the correspond-  
ing indication disappear.  
NUMBER  
7/  
9
WEEKLY  
TIMER  
DAILY  
4
6
2
4
You can programme this recorder to timer-record as many as 8  
programmes. If you try to programme the recorder to record a  
ninth, "PROGRAM FULL" appears on screen and "FULL" appears  
on the front display panel. To record the extra programme, you  
must first cancel any unnecessary programmes (pg. 26).  
1
3
7
¡
¢
8
1
4
MENU  
OK  
ATTEN TIO N  
3
Regarding Guide Program Number Set  
"ERROR=GUIDE PROG" appears after performing step 3 on  
the previous page if the Guide Program number for the  
PlusCode number you entered has not been set.  
If the recorder is in the stop or rewind or fast-forward  
mode, the following screen will appear with "– –" under  
"TV PROG" blinking.  
5
Press the NUMBER keys or PUSH JOG %fi to input the  
preset position number you recorder receives that  
station on, then press OK.  
GUIDE PROG SET  
(Ex.) To timer-record a BBC2  
programme with Video Plus+  
* If your recorder receives  
BBC2 on the preset position  
2, press OK after entering  
"2".  
GUIDE PROG TV PROG  
2
– –  
Satellite Receiver Users  
To timer-record a satellite broadcast using Video Plus+,  
5
[
] =  
[MENU] : EXIT  
perform steps 1 6 and, before the selected programme  
begins, select the appropriate channel on the satellite  
receiver. Then set the receiver's timer. If your satellite  
receiver doesn't have a timer, leave the unit's power  
switched on.  
Press MENU, then try again from step 1.  
If the recorder is in a mode other than the above mentioned  
modes, press MENU first and input the correct Guide  
Program number for that PlusCode number (pg. 10,  
"Video Plus+ Setup"), then try again from step 1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING(cont.)  
24  
If you dont know the PlusCode number for the programme you  
wish to record, use the following procedure to set your recorder  
to timer-record the programme.  
Re g u la r Tim e r  
ACCESS TIMER  
PROGRAMMING SCREEN  
Pro g ra m m in g  
Press PROG.  
Remember, the clock must be set before you can progamme  
1
the timer (pg. 44).  
ACCESS PROGRAMME  
SCREEN  
Before performing the following steps:  
Insert a cassette with the safety tab in place. The recorder  
will come on automatically.  
Press START +/–. (If youre  
P1 –  
just starting out, “P1”  
appears.)  
Turn on the TV and select the VIDEO channel (or AV mode).  
START  
–:– –  
STOP  
–:– –  
2
=
SP  
ON  
DATE  
25.12  
TV PROG  
– –  
[+/–] =  
[MENU] : EXIT  
1
2
5
8
0
3
6
The front display panel looks like this:  
4
SP  
7/  
9
4
4
ENTER PROGRAMME  
START TIME  
2
START+/–  
Press START +/– to enter  
the time you want  
P1 –  
1
3
7
¢
START  
21:00  
STOP  
–:– –  
3
recording to start.  
2,3  
5
=
8
SP  
ON  
Press and hold START  
+/– to move in 30-  
minute increments, or  
press and release  
repeatedly to move 1  
minute at a time.  
1
DATE  
25.12  
TV PROG  
– –  
4
PROG.  
1
3
[+/–] =  
[MENU] : EXIT  
The front display panel looks like this:  
SP  
PDC Re co rd in g  
Now available from some TV stations, PDC (Programme  
Delivery Control) is a service designed to assure safe,  
accurate timer recording. With this system, special code  
signals are transmitted together with the audio/video  
signals. These code signals control your video recorder and  
have precedence over advertised times you preset in the  
timer. This means that your recorder will start and stop  
recording when the preset TV programmes actually start  
and end — even if the broadcast time of a preset TV  
programme is changed.  
ENTER PROGRAMME STOP  
TIME  
Press STOP +/– to enter the time you want recording to  
stop.  
4
5
ENTER PROGRAMME DATE  
Press DATE +/. (The current date appears on screen.  
The date you enter appears in its place.)  
N O TES:  
Set the start time (PDC time) exactly as advertised in the  
TV listing. A different time than advertised will result in  
no recording.  
PDC Recording is also possible when a satellite receiver  
or a cable system is connected to AV2 IN on your  
recorder.  
PDC recording is also possible via the AV1 IN/OUT  
connector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
ENTER PRESET POSITION  
9
Press TV PROG. +/.  
P1 –  
START  
21:00  
STOP  
22:00  
6
=
SP  
ON  
¢
¢
DATE  
25.12  
TV PROG  
1
BBC 1  
q
¡
1
[+/–] =  
[MENU] : EXIT  
SP  
IMPORTANT  
Be sure to confirm the setting of PDC recording.  
If "  
on the display panel, PDC is set to ON.  
If " OFF" is displayed on the screen or "  
not lit on the display panel, PDC is set to OFF.  
ON" is displayed on the screen or "  
" is lit  
" is  
To change the setting, press  
"7").  
"PDC Recording" on page 24.  
: PDC (NUMBER key  
1
2
5
8
0
3
6
4
SET TAPE SPEED  
7/  
9
WEEKLY  
Press SP/LP (  
) to set the tape speed.  
: PDC  
4
TIMER  
7
8
9
2
7
TV PROG.  
RETURN TO NORMAL  
SCREEN  
6
1
3
7
¡
¢
After confirming all information is correct, press OK  
and the normal screen appears.  
8
1
Repeat steps 1 8 for each additional programme.  
4
3
ENGAGE RECORDER’S  
OK  
8
TIMER MODE  
Press TIMER. The recorder turns off automatically.  
9
To Timer-Record Weekly Or Daily Serials . . .  
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER  
key “9”) for weekly serials or DAILY (NUMBER key “8”) for  
daily serials (Monday – Friday). Either "WEEKLY" or "DAILY"  
appears on the screen. Pressing the button again makes the  
corresponding indication disappear.  
N O TES:  
You can programme this recorder to timer-record as many as  
8 programmes. If you try to programme the recorder to record  
a ninth, "PROGRAM FULL" appears on screen and "FULL"  
appears on the front display panel. To record the extra  
programme, you must first cancel any unnecessary  
programmes (pg. 26).  
To timer-record a satellite broadcast through a satellite  
receiver connected to the AV2 IN connector on the back of  
the recorder, in step 6 above, set "TV PROG" to "AUX2" by  
pressing TV PROG. +/–. Before the selected programme  
begins, select the appropriate channel on the satellite  
receiver, then set the receiver's timer. If your satellite receiver  
doesn't have a timer, leave the unit's power switched on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING(cont.)  
Ch e ck An d Ca n ce l  
26  
Pro g ra m m e s  
ACCESS PROGRAMME  
DISPLAY AND/ OR SCREEN  
¢
¢
q
Press PROG. CHECK.  
¡
1
The display panel shows the programme start time.  
Pressing OK changes the display to the programme  
stop time, then the date and preset position.  
If the recorder is turned on and the TV is set to its  
VIDEO channel or AV mode, you can check program  
information on screen as well.  
1
Each time you press PROG. CHECK, the next  
programme's information appears.  
If All Information Is Correct . . .  
. . . programming is completed.  
If You Wish To Revise Data . . .  
. . . with the recorder's power turned on, go to step 2.  
If You Wish To Cancel A Program . . .  
. . . with the recorder's power turned on, press CANCEL.  
1
2
5
8
0
3
6
All information you input is deleted.  
4
7/  
9
CANCEL  
REVISE PROGRAMME  
INFORMATION  
4
PROG. CHECK  
2
Input the appropriate data using the START +/–, STOP  
+/–, DATE +/– and TV PROG. +/– buttons on the  
remote control.  
TV PROG.+/–  
2
START+/–  
1
¢
8
1
Tim e r Wa rn in g  
If you have programmed your  
recorder to timer-record a  
4
3
OK  
programme or a series of  
– WARNING–  
TIMER RECORDING  
TO START SOON  
[CANCEL]  
programmes, a warning appears on  
screen to tell you that the recording  
is to start in 5 minutes.  
N O TES:  
The warning only appears if  
youre not in the Timer mode at that time.  
If this recorder is being used as the player for tape dubbing,  
the warning screen is recorded on the tape in the other video  
recorder.  
The warning blinks for the entire 5 minutes leading up to the  
start of timer recording. To clear the display, press CANCEL.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Auto Tim er  
When the Auto Timer is set to ON the timer is automatically  
engaged when the recorder power is turned off and automati-  
cally disengaged when the recorder is powered back on.  
ACCESS MAIN MENU  
1
2
5
8
0
3
6
SCREEN  
Press MENU twice.  
4
1
7/  
9
4
TIMER  
ACCESS MODE SET  
SCREEN  
2
Press PUSH JOG %fi to  
MAIN MENU  
move the highlight bar  
MODE SET  
1
3
7
¡
¢
2
(pointer) to "MODE SET",  
then press OK.  
AUTO CH SET  
MANUAL CH SET  
GUIDE PROG SET  
CLOCK SET  
8
1
4
MENU  
OK  
PUSH JOG  
[5 ] =  
3
[MENU] : EXIT  
SELECT MODE  
Press PUSH JOG to select  
MODE SET  
either "ON" or "OFF".  
AUTO TIMER : OFF  
3
O. S. D.  
: ON  
: ON  
B. E. S. T.  
[5 ] = [ ] : ON/OFF  
[MENU] : EXIT  
RETURN TO NORMAL  
SCREEN  
Press MENU.  
4
N O TE:  
For safety, when Auto timer is set to "OFF", all other recorder  
functions are disabled while the Timer mode is engaged. To  
disengage the timer, press TIMER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING  
28  
You can use your video recorder as the source player or the  
recording deck.  
Ed it To O r  
MAKE CONNECTIONS  
Connect the players 21-pin SCART connector to the  
recorders 21-pin SCART connector as illustrated on  
Fro m An o th e r  
Vid e o  
Re co rd e r  
1
page 29.  
When Using Your Video Recorder As The Source  
Player . . .  
. . . connect its AV1 IN/OUT connector to the recording  
deck.  
When Using Your Video Recorder As The Recording  
Deck . . .  
. . . connect its AV2 IN or AV1 IN/OUT connector to the  
source player.  
.
SET RECORDING DECK’S  
INPUT MODE  
Set to AUX. With this video recorder, press NUMBER  
key "0" and/or TV PROG. to select depending on the  
connector being used — “AU-1” for the AV1 IN/OUT  
connector, or “AU-2” for the AV2 IN connector.  
2
1
2
5
8
0
3
6
4
START SOURCE PLAYER  
7/  
9
Engage its Play mode.  
4
3
4
NUMBER "0"  
2
START RECORDING DECK  
TV PROG.  
Engage its Record mode.  
1
3
7
¡
¢
8
1
4
N O TE:  
All necessary cables can be obtained from your dealer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
HR-J6 4 5 EK/ ES  
TV Receiver  
Player  
Your recorder  
Recorder  
Your recorder  
TV Receiver  
21-pin SCART Cable  
(not provided)  
RF Cable  
(provided)  
21-pin SCART  
Cable  
VIDEO  
CHAN-  
NEL or  
VIDEO  
CHAN-  
NEL or  
AV  
(not provided)  
RF Cable  
(provided)  
AV mode  
mode  
Another recorder  
Another recorder  
Recorder  
Player  
HR-J2 4 5 EK/ J2 4 6 EK  
TV Receiver  
Player  
Your recorder  
Recorder  
Your recorder  
TV Receiver  
21-pin SCART Cable  
(not provided)  
21-pin SCART  
Cable  
(not provided)  
RF Cable  
(provided)  
VIDEO  
CHAN-  
NEL or  
VIDEO  
CHAN-  
NEL or  
AV  
RF Cable  
(provided)  
AV mode  
mode  
Another recorder  
Another recorder  
Recorder  
Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING (cont.)  
30  
You can use a camcorder as the source player and your video  
recorder as the recorder.  
Ed it Fro m A  
Ca m co rd e r  
MAKE CONNECTIONS  
connectors to the recorder's rear panel AV2 IN or AV1  
Connect the camcorder's AUDIO/VIDEO OUT  
1
2
IN/OUT connector via the optional cable adapter.  
SET RECORDER’S INPUT  
MODE  
Press the NUMBER key "0" and/or TV PROG. to select  
the appropriate input mode depending on the connec-  
tor being used; "AU-1" for the AV1 IN/OUT connector,  
or "AU-2" for the AV2 IN connector.  
1
2
5
8
0
3
6
4
START CAMCORDER  
7/  
9
Engage its Play mode.  
4
3
4
NUMBER "0"  
TV PROG.  
START RECORDER  
Engage its Record mode.  
1
3
7
¡
¢
8
1
4
3
HR-J245EK/J246EK  
Recorder  
Recorder  
HR-J645EK/ES  
Cable adapter  
(not provided)  
Cable adapter  
(not provided)  
Audio/Video Cable  
(not provided)  
VIDEO OUT  
AUDIO OUT  
Audio/Video Cable  
(not provided)  
Camcorder  
VIDEO OUT  
AUDIO OUT  
Player  
Camcorder  
Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM CONNECTIONS  
31  
These instructions enable you to connect your video recorder to  
your Hi-Fi stereo system (if you have one) and listen to the  
soundtrack through the stereo.  
Co n n e ctio n To  
A Ste re o  
Syste m  
(HR-J6 4 5 EK/ ES  
o n ly)  
FM Tuner  
CD Player  
Stereo Amplifier  
I
AUX IN or TAPE MONITOR  
Audio Cable (not provided)  
Mains outlet  
Speaker  
Speaker  
Television  
ANT. IN  
R
L
AUDIO OUT  
AV1 IN/OUT  
AV2 IN  
RF OUT  
Back of Recorder  
AUDIO OUT  
CAUTIO N S:  
MAKE CONNECTIONS  
This recorder has a dynamic range of more than 80 dB with  
regards to its Hi-Fi audio capability. It is recommended that  
you check the maximum level if you are going to listen to the  
Hi-Fi audio signals through a stereo amplifier. A sudden surge  
in the input level to the speakers may damage them.  
Connect the AUDIO OUT L and R connectors on your  
video recorder to the AUX IN or TAPE MONITOR  
terminals on your stereo system's receiver or amplifier.  
1
Some speakers and televisions are specially shielded to  
prevent television interference. If both are of the non-shielded  
type, do not place the speakers adjacent to the TV set as this  
can adversely affect the video playback picture.  
N O TES:  
When connecting your recorder's audio output connectors to  
a stereo amplifier, make sure you connect L and R correctly.  
If NICAM TV broadcasts are receivable in your area, this  
recorder can record them independently of the TV set and  
play them back through the connected stereo system.  
When listening to sound through the connected stereo system,  
turn the TV's volume down completely.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM CONNECTIONS (cont.)  
32  
The AV2 IN socket on the rear panel of your recorder allows  
simple connection to a satellite receiver.  
Co n n e ctio n To  
A Sa te llite  
Re ce ive r  
Aerial  
Outdoor Unit  
Satellite Cable  
TV Aerial cable  
Satellite Receiver  
Unit  
ANT. IN  
RF OUT  
DECODER  
VCR  
TV  
Mains outlet  
R
L
AUDIO OUT  
AV1 IN/OUT  
AV2 IN  
Back of HR-J645EK/ES  
AV2 IN  
AV1 IN/OUT  
Back of HR-J245EK/J246EK  
N O TES:  
When connecting your recorder to a TV equipped with 21-pin SCART connectors, follow the illustration above using the cables  
shown in gray.  
For details, check your satellite receivers instruction manual.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Aerial terminal  
Back of TV  
21-pin SCART  
connectors  
EXT.2  
EXT.1  
ANT. IN  
RF OUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
34  
O n -Scre e n Disp ia y  
You can choose whether or not to have various operational  
indicators appear on screen, by setting this function ON or OFF.  
Turn on the TV and select the VIDEO channel (or AV mode).  
TURN ON THE RECORDER  
Press  
.
1
2
5
8
0
3
6
1
2
3
4
4
ACCESS MAIN MENU  
7/  
9
SCREEN  
4
Press MENU twice.  
2
ACCESS MODE SET  
SCREEN  
1
3
7
¡
¢
8
Move the highlight bar (pointer) to "MODE SET" by  
pressing PUSH JOG %fi, then press OK.  
1
4
MENU  
OK  
PUSH JOG  
3
ENABLE/ DISABLE  
ON-SCREEN DISPLAY  
The default setting is  
ON”, so if you want on-  
screen displays, leave the  
MODE SET  
AUTO TIMER : OFF  
O. S. D.  
: ON  
: ON  
setting as it is and go to  
step 5. If you dont want  
the displays to appear,  
press PUSH JOG %fi to  
move the highlight bar  
(pointer) to "O.S.D." and  
press PUSH JOG to set  
O.S.D.” to “OFF”.  
B. E. S. T.  
5
[
] = [ ] : ON/OFF  
[MENU] : EXIT  
RETURN TO NORMAL  
N O TES:  
Press MENU.  
When you use this recorder as the player for editing, be sure  
to set "O.S.D." to "OFF." before starting.  
5
During playback, the operation mode indicators may be  
disturbed depending on the type of tape being used.  
The superimposed indication on the TV screen tells you what the recorder is doing.  
1– Operation mode indicators  
2– Preset position number and station name/Aux. indicator  
(AUX1 or AUX2)  
3
1
13  
3– Cassette loaded mark  
4– Tape speed SP/LP/EP (EP is for NTSC playback only)  
5– Clock display  
q6  
SP  
2
5
6
]
NTSC  
PR. 12 ABCD  
21 : 00  
4
14  
6– Current day/month/year  
24. 12. 97 – WARNING–  
TIMER RECORDING  
TO START SOON  
[CANCEL]  
7– NICAM display (pg. 35)(HR-J645EK/ES only)  
8– Tape direction  
9– Tape position indicator (pg. 35)  
10– Counter display (including Counter Memory indicator)  
11– Audio mode display (pg. 16)(HR-J645EK/ES only)  
12– Tape remaining time indicator (pg. 19)  
13– Timer warning display (pg. 26)  
14– NTSC display (pg. 17)  
7
9
11  
ST NICAM  
8
10  
12  
+
+
+
+
0
HI FI  
NORM  
M –1 : 23 : 45  
REMAIN 1 : 00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Re ce ivin g N ICAM Ste re o  
An d Bilin g u a l Pro g ra m m e s  
(HR-J6 4 5 EK/ ES O n ly )  
Your recorder is equipped with a Digital stereo sound decoder  
(NICAM), making reception of stereo and bilingual broadcasts  
possible.  
¢
¢
q
¡
1
When the recorder is tuned to a different station, the type of  
broadcast being received will be displayed on the TV screen for  
a few seconds.  
Type of Broadcast  
On-screen Display  
Being Received  
Regular Monaural  
NICAM Stereo  
NICAM Bilingual  
NICAM Monaural  
(none)  
ST NICAM  
BIL NICAM  
NICAM  
N O TE:  
"O.S.D." must be set to "ON" or the on-screen displays will not  
1
4
7
2
5
8
0
3
6
appear (pg. 34).  
To listen to a stereo programme, press AUDIO MONITOR  
until "HI FI L  
To listen to a bilingual programme, press AUDIO MONITOR  
until either "HI FI L " or "HI FI R" appears on the TV  
screen (as required).  
/
9
R" appear on the TV screen.  
4
2
To listen to the Standard (regular monaural) audio while  
receiving a NICAM broadcast, press AUDIO MONITOR until  
"NORM" appears on the TV screen.  
1
3
7
¡
¢
FF  
REW  
8
1
4
To Re co rd N ICAM Ste re o  
An d Bilin g u a l Pro g ra m m e s  
(HR-J6 4 5 EK/ ES O n ly )  
The NICAM audio programme will be recorded on the Hi-Fi  
audio track, and the Standard audio programme on the normal  
audio track.  
3
N O TES:  
If the quality of stereo sound being received is poor, the  
broadcast will be received in monaural with better quality.  
Before playing back a programme recorded in stereo, or a  
bilingual programme, refer to "Soundtrack Selection" (pg. 16).  
Ta p e Po sitio n In d ica to r  
The tape position indicator  
appears on screen when, from  
the Stop mode, you press FF,  
REW or perform an Index  
Search. The position of “5” in  
relation to “0” (beginning) or  
“+” (end) shows you where you  
are on the tape.  
3
+
+
+
0
1:23:45  
REMAIN 2:35  
O.S.D.” (pg. 34) must be  
set to “ON”, or the indicator  
will not appear.  
Beginning  
End  
N O TE:  
Depending on the type of tape used, there may be times when  
the indication is not correct.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SET  
36  
IMPORTANT  
Perform the following steps only if auto channel set has not  
been set correctly by Auto Set Up function (pg. 8) or if  
you have moved to a different area or if a new station starts  
broadcasting in your area.  
Au to Ch a n n e l  
Se t  
Your recorder needs to memorise all necessary stations in preset  
positions in order to record TV programmes. Auto Channel Set  
automatically assigns all receivable stations in your area.  
Turn on the TV and select the VIDEO channel (or AV mode).  
TURN ON THE RECORDER  
Press  
.
1
2
3
ACCESS MAIN MENU  
1
2
5
8
0
3
6
SCREEN  
4
Press MENU twice.  
7/  
9
4
PERFORM AUTO CHANNEL  
2
SET  
bar (pointer) to  
Move the highlight  
MAIN MENU  
1
3
7
¡
¢
"AUTO CH SET" by  
pressing PUSH JOG  
MODE SET  
AUTO CH SET  
8
MANUAL CH SET  
GUIDE PROG SET  
%fi, then press OK.  
1
4
CLOCK SET  
The Auto Set screen  
appears, and  
MENU  
OK  
PUSH JOG  
3
[5 ] =  
remains on screen  
while the recorder  
searches for  
[MENU] : EXIT  
receivable stations.  
As Auto Channel  
Set progresses, the  
AUTO SET  
PLEASE WAIT  
"
" mark on the  
screen moves from  
left to right. Wait  
until the screen as  
shown in step 4  
appears.  
+
+
+
0
[MENU] : EXIT  
Beginning  
End  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
VIEW CONFIRMATION  
SCREEN  
located appear on a  
Confirmation screen —  
preset positions (PR),  
channels (CH) and station  
names (ID – pg. 42). To  
view the next page of the  
listing, press PUSH JOG  
The stations your recorder  
PR CH ID  
PR CH ID  
01 26 BBC1 08  
02 33 BBC2 09  
––––  
––––  
––––  
––––  
––––  
––––  
––––  
4
5
03 23 ITV  
04 30 CH4 11  
05 37 CH5 12  
10  
1
2
5
8
0
3
6
06  
07  
–––– 13  
–––– 14  
4
[5  
]
=
: EDIT  
= [CANCEL] : DELETE  
7/  
9
%fi  
. The blueback  
screen and the program  
[MENU] : EXIT  
4
currently being broadcast by the blinking station appear  
alternately for 5 seconds each.  
2
The Guide Program numbers will also be set  
automatically during Auto channel Set.  
1
3
7
¡
¢
RETURN TO NORMAL  
8
SCREEN  
1
4
Press MENU.  
MENU  
PUSH JOG  
3
Using the Confirmation screen, you can skip or add  
preset positions, enter station names and perform  
other operations. Refer to pages 38 – 41 for the  
procedures.  
Depending on reception conditions, the stations may  
not be stored in order, and the station names may not  
be stored correctly.  
IMPO RTAN T  
Depending on the reception conditions, the station names  
may not be stored correctly, and auto Guide Program  
Number Set may not work properly. If the Guide Program  
numbers are not set properly, Video Plus+ timer recording  
(pg. 22) will not work correctly; be sure to check if the  
Guide Program numbers have been set correctly  
(pg.10, "Video Plus+ Setup").  
Since your video recorder memorizes all detected  
stations even if the reception condition is poor, some of  
those stored stations may produce a noisy picture. To  
delete those stations, "Delete A Channel" on page 39.  
N O TE:  
Fine tuning is performed automatically during Auto Channel  
Set. If you want to perform it manually, refer to page 41.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SET (cont.)  
38  
Sto rin g Ch a n n e ls Ma n u a lly  
Store channels that were not stored during Auto Set Up (pg.  
Ma n u a l  
Ch a n n e l Se t  
8) or Auto Channel Set (pg. 36).  
ACCESS MAIN MENU  
Press MENU twice.  
1
ACCESS CONFIRMATION  
SCREEN  
Press PUSH JOG%fi to move the highlight bar (pointer)  
to “MANUAL CH SET”, then press OK. The Confirma-  
1
2
5
8
0
3
6
2
3
4
tion screen appears.  
4
NUMBER  
SELECT POSITION  
7/  
9
Press PUSH JOG%  
until an open position in  
which you want to store a channel begins blinking,  
4
then press OK. The Manual Ch. Set screen appears.  
2
INPUT CHANNEL  
The number "21" appears  
blinking to the right of  
MANUAL CH SET  
PR CH  
1
3
7
¡
¢
"CH". Press the NUMBER  
keys to input the channel  
number you want to store.  
8
01 CH21  
1
4
5
[
[
For fine tuning adjust-  
ment, press PUSH JOG  
until the channel  
]/ [0-9] : SELECT  
] : CURSOR   
: OK  
MENU  
OK  
PUSH JOG  
3
[MENU] : EXIT  
number begins blinking,  
%
then press PUSH JOG . While tuning, “F+” or “F–  
” appears.  
ENTER NEW CHANNEL  
INFORMATION  
Press OK and the Confirmation screen appears.  
Repeat steps 3 through 5 as necessary.  
5
6
CLOSE CONFIRMATION  
SCREEN  
Press MENU.  
To input the station name, see page 40.  
To change positions, see "Change Station Preset  
Position" (pg. 39).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Perform steps 1 and 2 of "Storing Channels Manually" on  
page 40 to access the Confirmation screen before continuing.  
De le te A Ch a n n e l  
SELECT ITEM  
delete begins blinking.  
1
2
5
8
0
3
6
Press PUSH JOG%  
until the item you want to  
4
1
2
7/  
9
CANCEL  
DELETE CHANNEL  
4
Press CANCEL.  
2
The item directly beneath the cancelled one moves  
up one line.  
Repeat steps 1 and 2 as necessary.  
1
3
7
¡
¢
CLOSE CONFIRMATION  
8
1
SCREEN  
4
MENU  
OK  
Press MENU.  
PUSH JOG  
3
3
Ch a n g e Sta tio n Pre se t  
Po sitio n  
SELECT ITEM  
move begins blinking. Then press OK and the station  
Press PUSH JOG%  
until the item you want to  
1
2
name (ID) and its channel (CH) number begin blinking.  
SELECT NEW POSITION  
Press PUSH JOG%  
to move the station to the new  
preset position, then press OK.  
Example: If you moved the station in position 3 to  
position 7, the stations originally in positions  
4–7 each move up one space.  
Repeat steps 1 and 2 as necessary.  
CLOSE CONFIRMATION  
SCREEN  
Press MENU.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SET (cont.)  
40  
Perform steps 1 and 2 of "Storing Channels Manually" on  
page 38 to access the Confirmation screen before continuing.  
Se t Sta tio n s (A)  
SELECT ITEM  
blinking. Then press OK twice and the stations name  
1
2
5
8
0
3
6
Press PUSH JOG%fi  
until the item you want begins  
4
1
2
(ID) begins blinking.  
7/  
9
SELECT NEW STATION  
4
Press PUSH JOG%fi until the new stations name (ID)  
you want to store begins blinking.  
2
Registered station names (pg. 42) appear as you  
press PUSH JOG%fi.  
1
3
7
¡
¢
SWITCH STATIONS  
8
Press OK.  
1
4
Repeat steps 1 through 3 as necessary.  
3
MENU  
OK  
PUSH JOG  
3
CLOSE CONFIRMATION  
SCREEN  
Press MENU.  
4
Se t Sta tio n s (B)  
N O TE:  
First perform step 1 of the above procedure.  
SELECT STATION NAME  
CHARACTER  
Press PUSH JOG and the first letter of the station  
name begins blinking.  
2
ENTER NEW CHARACTER  
%fi  
Press PUSH JOG  
to cycle through the characters  
(space) ) and stop when the  
(A–Z, 0–9, –, , +,  
*
3
desired one is indicated, then press PUSH JOG to  
enter. Enter the remaining characters the same way  
(maximum of 4).  
After entering all characters, press OK.  
Repeat steps 1 through 3 as necessary.  
If you make a mistake, press PUSH JOG until the  
incorrect character begins blinking. Then enter the  
%fi  
correct character by pressing PUSH JOG  
.
CLOSE CONFIRMATION  
SCREEN  
Press MENU.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Perform steps 1 and 2 of "Storing Channels Manually" on  
page 38 to access the Confirmation screen before continuing.  
Fin e -Tu n in g Ch a n n e ls  
Alre a d y Sto re d  
1
2
5
8
0
3
6
SELECT CHANNEL TO  
FINE-TUNE  
until the channel you want to  
4
7/  
9
%
Press PUSH JOG  
tune begins blinking.  
4
1
2
ACCESS MANUAL CH. SET  
SCREEN  
1
3
7
¡
¢
Press OK three times. The Manual Ch. Set screen  
8
appears.  
2
3
1
4
MENU  
OK  
PUSH JOG  
3
PERFORM TUNING  
%
Press PUSH JOG until the picture is its clearest.  
Then press OK.  
The Confirmation screen appears.  
Repeat steps 1 through 3 as necessary.  
CLOSE CONFIRMATION  
SCREEN  
Press MENU.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SET (cont.)  
42  
TV Sta tio n An d ID List  
STATION NAME  
ID*  
STATION NAME  
ID*  
Anglia TV  
ARD  
ARTE  
BBC Group  
BBC1  
BBC2  
Berlin 1  
Berlin 2  
Border TV  
Bayern1  
Bayern3  
BRT1  
ANGL  
ARD  
ARTE  
BBC  
BBC1  
BBC2  
BLN1  
BLN2  
BORD  
BR1  
SAT  
SAT 1  
Scottish TV  
SC4  
SDR  
SDR1  
SFB1  
SFB3  
SKY  
SAT1  
SCOT  
SC4  
SDR  
SDR1  
SFB1  
SFB3  
Sky One  
Sky Net  
Sport  
SKY1  
SKYN  
SPRT  
SR1  
BR3  
BRT1  
BRT2  
CHLD  
CH+  
CNN  
CHNL  
CNTR  
CH 4  
CH 5  
DRS  
BRT2  
SR 1  
Children Ch  
Canal +  
CNN  
Channel TV  
Central TV  
Channel 4  
Channel 5  
DRS  
Super RTL  
STV Test  
STV 1  
STV 2  
Suedwest3  
SWF 1  
Schweiz4  
TYNE TEES  
Text  
SRTL  
STVT  
STV1  
STV2  
SW3  
SWF1  
SWZ4  
TEES  
TEXT  
TF1  
DR TV  
DSF  
DRTV  
DSF  
TF1  
Euronews  
Euronews  
Eurosports  
France1  
France2  
France3  
Granada TV  
Grampian TV  
Hessen1  
Hessen3  
HRT  
EURN  
EURO  
EURS  
FR1  
FR2  
FR3  
GRNA  
GRMP  
HR1  
HR3  
HRT  
TNT int  
TRT int  
TSI  
TSR  
TSW  
TNT  
TRT  
TSI  
TSR  
TSW  
TVE  
TVPA  
TVP1  
TVP2  
TVS  
TVE  
TV Polonia  
TVP 1  
TVP 2  
TVS  
TV2  
TV2  
HTV  
HTV  
ITV  
TV5  
TV5  
ITV Network  
Kabelkanal  
London  
MDR  
MTV  
Nord3  
NDR1  
NDR3  
NED1  
NED2  
NED3  
Network 2  
NRK  
N-TV  
Offener Kanal  
ORF1  
ORF2  
ORF3  
OWL 3  
Premiere  
PR07  
Tele Zurich  
Ulster TV  
Veronica  
VIVA  
VIVA2  
VOX  
VTM  
VT4  
West1  
West3  
YLE 1  
YLE 2  
Yorkshire TV  
ZDF  
Zurich 1  
3SAT  
TZUR  
ULST  
VERN  
VIVA  
VIV2  
VOX  
VTM  
VT4  
WDR1  
WDR3  
YLE1  
YLE2  
YORK  
ZDF  
KABL  
LNDN  
MDR  
MTV  
N3  
NDR1  
NDR3  
NED1  
NED2  
NED3  
NET2  
NRK  
N-TV  
OKAN  
ORF1  
ORF2  
ORF3  
OWL3  
PRMI  
PR07  
RAI1  
RAI2  
RAI3  
RB1  
ZUR1  
3SAT  
* The "ID" abbreviation is what is shown on-screen in lieu of the  
station name. The "ID" abbreviation is listed in the Confirma-  
tion screen and is displayed on the TV screen when the  
recorder is tuned to a different station.  
RAI1  
RAI2  
RAI3  
RB1  
RB3  
RB3  
Rikisutvarpid-S  
RTBF 1  
RTBF 2  
RTE 1  
RKPS  
RTB1  
RTB2  
RTE1  
RTL  
RTL  
RTL 2  
RTP  
RTL2  
RTP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
TV Sta tio n Ch a n n e l N u m b e r Gu id e  
(Fo r cu sto m e rs in th e U.K.)  
Only the main stations are listed. There are in addition many relay stations, and full lists are available from BBC and  
ITC.  
BBC1 BBC2 ITV CH4  
BBC1 BBC2 ITV CH4  
London & South-East  
North-West  
Bluebell Hill ............................. 40  
Crystal Palace ........................... 26  
Dover........................................ 50  
Heathfield ................................. 49  
Oxford ...................................... 57  
46  
33  
56  
52  
63  
43  
23  
66  
64  
60  
65  
30  
53  
67  
53  
Caldbeck................................... 30  
Winter Hill ................................ 55  
34  
62  
28  
59  
32  
65  
North-East  
Bilsdale West Moor .................... 33  
Chatton ..................................... 39  
Pontop Pike .............................. 58  
26  
45  
64  
29  
49  
61  
23  
42  
54  
South-West  
Beacon Hill............................... 57  
Caradon Hill ............................. 22  
Huntshaw Cross ......................... 55  
Redruth ..................................... 51  
Stockland Hill ........................... 33  
Channel Islands  
63  
28  
62  
44  
26  
60  
25  
59  
41  
23  
53  
32  
65  
47  
29  
Scotland  
Angus........................................ 57  
Black Hill .................................. 40  
Sandale ..................................... 22  
Caldbeck................................... —  
Creigkelly.................................. 31  
Darvel ....................................... 33  
Durris........................................ 22  
Eitshal ....................................... 33  
Keelylang Hill ........................... 40  
Knock More .............................. 33  
Rosemarkie ............................... 39  
Rumster Forest .......................... 31  
Selkirk ....................................... 55  
63  
46  
34  
27  
26  
28  
26  
46  
26  
45  
27  
62  
60  
43  
28  
24  
23  
25  
23  
43  
23  
49  
24  
59  
53  
50  
32  
21  
29  
32  
29  
50  
29  
42  
21  
65  
Fremont Point ........................... 51  
44  
41  
47  
South  
Hannington ............................... 39  
Midhurst ................................... 61  
Rowridge .................................. 31  
45  
55  
24  
42  
58  
27  
66  
68  
21  
West  
Mendip ..................................... 58  
64  
61  
54  
Wales  
East  
Blaenplwyf ................................ 31  
Carmel ...................................... 57  
Llanddona ................................. 57  
Moel-y-Parc .............................. 52  
Presely ...................................... 46  
Wenvoe .................................... 44  
27  
63  
63  
45  
40  
51  
24  
60  
60  
49  
43  
41  
21  
53  
53  
42  
50  
47  
Sandy Heath ............................. 31  
Sudbury .................................... 51  
Tacolneston ............................... 62  
27  
44  
55  
24  
41  
59  
21  
47  
65  
Midlands  
Ridge Hill.................................. 22  
Sutton Coldfield ......................... 46  
The Wrekin ............................... 26  
Waltham ................................... 58  
28  
40  
33  
64  
25  
43  
23  
61  
32  
50  
29  
54  
Northern Ireland  
Brougher Mountain .................... 22  
Divis ......................................... 31  
Limavady .................................. 55  
28  
27  
62  
25  
24  
59  
32  
21  
65  
North  
Belmont .................................... 22  
Emley Moor .............................. 44  
28  
51  
25  
47  
32  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK SET  
44  
IMPORTANT  
Perform the following steps only if Auto Clock Set has not  
been performed correctly by Auto Set Up (pg. 8) or  
Auto Channel Set (pg. 36) or if the recorder's memory  
backup has expired.  
Clo ck Se t  
Turn on the TV and select the VIDEO channel (or AV mode).  
If you performed Auto Set Up or Auto Channel Set without ever  
having set the clock previously, the recorders built-in clock is  
also set automatically. The Auto and Manual clock setting  
procedures are necessary when . . .  
– a power outage of more than 3 minutes occurs.  
– the tuner has been set manually.  
– the user desires to set the clock slightly ahead of the actual time.  
– the clock was not set even after Auto Set Up or Auto Channel  
Set was performed.  
Whether you perform Auto or Manual clock setting, you can  
use the convenient Just Clock function.  
1
2
5
8
0
3
6
4
Just Clock  
The Just Clock function provides accurate time keeping through  
automatic adjustments at regular intervals, by reading data from  
a PDC signal.  
7/  
9
4
The Just Clock option appears in the Clock Set and Auto Clock  
Set screens, and can be set “ON” or “OFF” (the default setting is  
ON”). Press OK until the Just Clock setting begins blinking,  
then press PUSH JOG%fi to change the setting.  
2
IMPORTANT: If you turn off Just Clock off, the accuracy of your  
recorders built-in clock may be reduced, which could  
adversely effect timer recording.  
1
3
7
¡
¢
8
1
Both Auto and Manual clock setting procedures begin from step 4.  
4
MENU  
OK  
PUSH JOG  
3
Pre p a ra tio n  
TURN THE RECORDER ON  
Press  
.
1
2
3
ACCESS MAIN MENU  
SCREEN  
Press MENU twice.  
ACCESS CLOCK SET  
SCREEN  
Move the highlight bar (pointer) to "CLOCK SET" by  
pressing PUSH JOG %fi, then press OK. The Clock Set  
screen appears.  
CLOCK SET  
MAIN MENU  
MODE SET  
AUTO CH SET  
MANUAL CH SET  
GUIDE PROG SET  
CLOCK SET  
TIME  
0: 00  
DATE  
01 . 01  
YEAR  
00  
JUST CLOCK: ON  
TV PR.  
1
[
[
] : AUTO CLOCK  
5
] =  
5
[
] =  
[MENU] : EXIT  
[MENU] : EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
Au to Clo ck Se t  
SET CLOCK  
AUTOMATICALLY  
At the Clock Set screen,  
press PUSH JOG . The  
Auto Clock Set screen  
appears and clock setting  
begins.  
AUTO CLOCK  
4
1
2
5
8
0
3
6
PLEASE WAIT  
4
JUST CLOCK: ON  
TV PR. : 1  
If "TV PR." isn't set to the  
preset position on which  
Auto Clock Set data is  
received, "ERROR"  
7/  
9
4
appears, and then the screen from step 3 reappears.  
To set "TV PR.", press OK to place the cursor next to  
it, then cycle through the numbers by pressing PUSH  
JOG%fi until the number representing the position in  
which the station transmitting clock setting data  
(BBC1, BBC2, etc.) is stored appears.  
2
1
3
7
¡
¢
8
1
RETURN TO NORMAL  
SCREEN  
4
MENU  
OK  
PUSH JOG  
3
Once clock setting is completed, press MENU to return  
to the normal screen.  
5
Ma n u a l Clo ck Se t  
SET DATE AND TIME  
Press PUSH JOG%fi to set the hour, then press OK.  
The “minutes” display begins blinking. Repeat the  
4
5
procedure to set the minutes, day, month and year.  
SET JUST CLOCK  
The default setting is “ON”. Set as desired by pressing  
N O TES:  
PUSH JOG%fi, then press OK.  
Just Clock (when set to "ON") adjusts the recorder's built-in  
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.  
Just Clock is not effective when . . .  
If you set to “OFF”, you can disregard the next step as  
you wont be able to receive regular clock adjust-  
ments.  
– the recorders power is on (unless the recorder is tuned to  
the same preset selected in the Clock Set screen).  
– the recorder is in the Timer mode.  
– a difference of more than 3 minutes exists between the  
built-in clocks time and the actual time.  
If Just Clock is set to "ON", the recorders clock is automati-  
cally adjusted at the start/end of Summer Time.  
Auto clock setting and Just Clock may not function properly  
depending on the reception condition.  
During Manual clock setting, if the day and month data are  
invalid (such as 31st April), the month digits are cleared  
automatically and the day digits begin blinking. Input the  
correct data.  
SET CLOCK DATA SOURCE  
PRESET  
The recorder is preset to receive clock setting and  
adjustment data from preset position 1. Press PUSH  
JOG%fi to set the preset position to the number  
representing the station transmitting clock setting data  
(BBC1, BBC2, etc.), then press OK.  
6
7
START CLOCK OPERATION  
If, in step 4 of the Manual clock setting procedure, the year  
digits are automatically cleared and the day digits begin  
blinking, it is possible that you have input 29th February for a  
non-leap year. Input the correct data.  
Press MENU.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
46  
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily  
corrected, and this can save you the trouble of sending your video recorder off for repair.  
PO W ER  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. No power is applied to the  
recorder.  
The mains power cord is discon-  
nected.  
Connect the mains power cord.  
2. The clock is functioning properly,  
but the recorder cannot be powered.  
“ is displayed on the display  
panel with Auto Timer set to "OFF".  
Press the TIMER button to turn the  
“ indicator off.  
TAPE TRAN SPO RT  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
^“ is displayed on the display  
panel.  
Press PLAY to turn the “^“ indicator  
off.  
1. The tape does not run during  
recording.  
2. The tape stops during rewind or  
fast-forward.  
“M“ is displayed on the display  
panel.  
Press C.MEMORY to deactivate the  
Counter Memory function and turn  
the “M“ indicator off.  
3. The tape will not rewind or fast-  
forward.  
The tape is already fully rewound or  
fast-forwarded.  
Check the cassette.  
PLAYBACK  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. The playback picture does not  
appear while the tape is running.  
If you’re using the RF OUT connec-  
tion . . .  
If you are using the RF OUT connec-  
tion . . .  
. . . the TV receivers channel selector  
is not set to the VIDEO channel.  
. . . the recorder's VIDEO channel  
has not been correctly set.  
. . . set the TV receiver to the VIDEO  
channel. (pg. 6)  
. . . Perform "Video Channel Set"  
(pg. 6)  
If you’re using the AV connection, the  
TV receiver is not set to the AV mode.  
If you are using the AV connection,  
set the TV to its AV mode.  
2. Noise appears during visual search.  
This is normal.  
3. Noise appears during normal  
playback.  
The automatic tracking mode is  
engaged.  
Try manual tracking. (pg. 14)  
4. Noise appears during slow-motion  
playback.  
The automatic tracking mode is  
engaged.  
Try manual tracking. (pg. 14)  
5. Noise appears during still play-  
back.  
Press TV PROG. + or – a few times to  
remove the noise bars from the screen.  
6. (HR-J645EK/ES only) Breaks are  
noticeable in Hi-Fi soundtrack.  
Automatic tracking is engaged.  
Engage and adjust tracking manually.  
(pg. 14)  
7. The playback picture is blurred or  
interrupted while TV broadcasts are  
clear.  
The video heads may be dirty.  
Consult your JVC dealer.  
RECO RDIN G  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
There is no cassette loaded, or the  
cassette loaded has had its Record  
Safety tab removed.  
Insert a cassette, or using adhesive  
tape, reseal the slot where the tab  
was removed.  
1. Recording cannot be started.  
2. TV broadcasts cannot be recorded.  
3. Tape-to-tape editing is not possible.  
“AU” has been selected as the input  
mode.  
Set to the desired preset.  
The source (another video recorder,  
camcorder) has not been properly  
connected.  
Confirm that the source is properly  
connected.  
All necessary power switches have  
not been turned on.  
Confirm that all units’ power switches  
are turned on.  
The input mode is not correct.  
Set the input mode to “AU”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
The camcorder has not been  
properly connected.  
Confirm that the camcorder is  
properly connected.  
4. Camcorder recording is not  
possible.  
The input mode is not correct.  
Set the input mode to “AU”.  
TIMER RECO RDIN G  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
SYMPTOM  
Re-perform the clock and/or timer  
settings.  
1. Timer recording wont work.  
The clock and/or the timer have  
been set incorrectly.  
Press TIMER and confirm that ““ is  
The timer is not engaged.  
displayed on the display panel.  
Timer programming cant be  
performed while a timer recording is  
in progress. Wait until it finishes.  
2. On-screen timer programming is  
not possible.  
Timer recording is in progress.  
The timer is engaged but theres no  
cassette loaded.  
Load a cassette with the Record  
Safety tab intact, or cover the hole  
using adhesive tape.  
3. ““ and “]“ on the display  
panel wont stop blinking.  
The loaded cassette has had its  
Record Safety tab removed.  
Remove the cassette and cover the  
hole with adhesive tape, or insert a  
cassette with the Record Safety tab  
intact.  
4. The cassette is automatically  
ejected, and ““ and “]“ on the  
display panel wont stop blinking.  
TIMER has been pressed when there  
are no programs in memory, or the  
timer record information has been  
programmed incorrectly.  
Check the programmed data and re-  
program as necessary, then press  
TIMER again.  
5. ““ blinks for 10 seconds and the  
Timer mode is disengaged.  
The end of the tape was reached  
during timer recording.  
The programme may not have been  
recorded in its entirety. Next time make  
sure you have enough time on the tape  
to record the entire programme.  
6. The cassette is automatically  
ejected, the power shuts off and  
“ and “]“ wont stop  
blinking.  
The recorders preset positions have  
been set incorrectly.  
Refer to "Guide Program Number Set"  
and re-perform the procedure  
(pg. 10).  
7. Video Plus+ does not timer-record  
properly.  
O THER PRO BLEMS  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
1. Whistling or howling is heard from  
the TV during camcorder record-  
ing.  
The camcorders microphone is too  
close to the TV.  
The TV’s volume is too high.  
Position the camcorder so its  
microphone is away from the TV.  
Turn the TVs volume down.  
2. When scanning channels, some of  
them are skipped over.  
Those channels have been desig-  
nated to be skipped.  
If you need the skipped channels,  
restore them (pg. 38).  
3. The preset cannot be changed.  
Recording is in progress.  
Press PAUSE to pause the recording,  
change presets, then press PLAY to  
resume recording.  
4. The remote control wont operate a  
JVC TV.  
The TV/SAT./VCR switch is in the  
wrong position.  
Set the switch to the correct position.  
5. Channel settings that were made  
manually seem to have changed or  
disappeared.  
After the manual settings were  
made, Auto Channel Set was  
performed.  
Perform manual setting again.  
6. No channels are stored in the  
recorder's memory.  
The TV aerial cable was not  
connected to the recorder when  
Auto Set Up was performed.  
Connect the TV aerial cable to the  
recorder properly and turn off the  
recorder power once, then turn the  
recorder power back on again. The  
recorder will try Auto Set Up again  
(pg. 8).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS AND ANSWERS  
48  
PLAYBACK  
RECORDING  
Q. What happens if the end of the tape is reached  
during playback or search?  
A. The tape is automatically rewound to the beginning.  
Q. When I pause and then resume a recording, the end  
of the recording before the pause is overlapped by  
the beginning of the continuation of recording. Why  
does this happen?  
A. This is normal. It reduces distortion at the pause and  
resume points.  
Q. Can the video recorder indefinitely remain in the  
still mode?  
A. No. It stops automatically after 5 minutes to protect  
the heads.  
Q. Can the video recorder indefinitely remain in the  
Record-Pause mode?  
A. No. The video recorder shuts off automatically after 5  
minutes to protect the heads.  
Q. During search, slow, still and frame-by-frame  
playback, I cant hear any audio. Whats the  
problem?  
A. This is normal.  
Q. What happens if the tape runs out during recording?  
A. The video recorder automatically rewinds it to the  
beginning.  
Q. When returning from multi-speed search to normal  
playback, the picture is disturbed. Should I be  
concerned about this?  
TIMER RECORDING  
A. No, it is normal.  
Q. "Q" and "" remain lit on the display panel. Is there  
a problem?  
A. No. This is a normal condition for a timer recording in  
Q. Noise bars appear during multi-speed search. Whats  
progress.  
the problem?  
A. This is normal.  
Q. Can I program the timer while Im watching a tape  
or a TV broadcast?  
A. You wont see the picture as it is replaced by the on-  
screen menu, but the audio from the program or tape  
youre viewing can be heard.  
Q. Other than preventing further recording, what effect  
does removing the Record Safety tab have?  
A. It disables marking of index codes.  
Q. Sometimes, during Index Search, the video recorder  
cant find the programme I want to see. Why not?  
A. There may be index codes too close together.  
ATTENTION:  
This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases,  
switch the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. Take out the cassette.  
After checking the cassette, operate the unit as usual.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
49  
GENERAL  
TUNER/TIMER  
Power requirement  
Power consumption  
: AC 220 – 240 V`, 50/60 Hz  
: 24 W (HR-J645EK/ES)  
TV channel storage  
capacity  
: 99 positions  
: 20 W (HR-J245EK/J246EK)  
(+AUX position "AU")  
Temperature  
Operating  
Storage  
Operating position  
Dimensions (WxHxD) : 400 x 94 x 340 mm  
Weight  
Tuning system  
Channel coverage  
HR-J645EK/  
HR-J245EK/  
J246EK  
: Frequency synthesized tuner  
: 5°C to 40°C  
: –20°C to 60°C  
: Horizontal only  
: UHF channels 21 – 69  
(470 – 862 MHz)  
: 4.3 kg  
Format  
Maximum recording time  
(SP)  
: VHS PAL standard  
HR-J645ES  
Aerial output  
: VHF 44.5 – 143/143 – 470 MHz  
UHF 470 – 862 MHz  
: UHF channels 22 – 69  
(Adjustable)  
: 240 min. with E-240 video  
cassette  
(LP)  
: 480 min. with E-240 video  
cassette  
Memory backup time  
: Approx. 3 min.  
ACCESSORIES  
VIDEO/AUDIO  
Provided accessories  
: RF cable,  
Infrared remote control unit,  
"AA" battery x 2  
Signal system  
: PAL-type colour signal and  
CCIR monochrome signal,  
625 lines/50 fields  
: DA4 (Double Azimuth)  
helical scan system  
(HR-J645EK/ES)  
Rotary two-head helical scan  
system (HR-J245EK/J246EK)  
: 45 dB  
Recording system  
Specifications shown are for SP mode unless otherwise  
specified.  
E.& O.E. Design and specifications subject to change without  
notice.  
Signal-to-noise ratio  
Horizontal resolution  
Frequency range  
: 250 lines  
: 70 Hz to 10,000 Hz  
(Normal audio)  
20 Hz to 20,000 Hz  
(Hi-Fi audio)(HR-J645EK/ES  
only)  
Input/Output  
: 21-pin scart connector x 2  
(IN/OUT x 1, IN x 1)  
RCA connector x 1  
(OUT x 1) (HR-J645EK/ES  
only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
50  
FRO N T VIEW  
1 2  
3
5
6 7  
8
4
9
¢ INDEX  
¢
STANDBY/ON  
q
COUNTER  
RESET  
TIMER  
TV PROG  
SP/ LP  
¡
1
0
!
@
# $ % ^  
1 TIMER Button engages timer standby mode.  
9 STOP/EJECT Button stops tape; ejects tape  
during Stop mode. pg. 12  
pg. 23, 25  
0 Display Panel provides clear view of various  
2 STANDBY/ON  
Button turns recorder on/off  
displays and indicators. pg. 52  
Infrared Beam Receiving Window is where  
remote control should be aimed when in use.  
(loading a cassette also turns power on). pg. 8  
3 TV PROG. +/– Buttons select a preset position.  
pg. 18  
!
@ SP/LP Button selects tape speed. pg. 18  
# REVIEW Button "reviews" timer-recorded  
programme. pg. 14  
$ PAUSE Button stops tape temporarily during  
recording pg. 18; stops tape temporarily  
during playback; plays back frame by frame  
with each additional press. pg. 13  
% Rewind [REW] Button rewinds the tape pg. 12;  
initiates high-speed reverse search. pg. 13  
^ Fast Forward Button fast-forwards tape pg. 12;  
initiates high-speed forward search. pg. 13  
4 COUNTER RESET Button resets counter to  
0:00:00. pg. 19  
5 Cassette Loading Slot is where cassette is  
inserted; door closes, "cassette loaded" indicator  
lights up on front display panel.  
6 RECORD Button starts regular recording (press  
once), Instant Timer Recording (press twice);  
sets duration of ITR. pg. 18, 19  
7 INDEX Button initiates Index Search. pg. 15  
8 PLAY Button plays back tape pg. 12; cancels  
Pause, Still, Slow, Search modes. pg. 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
REAR VIEW [J6 4 5 EK/ ES]  
4
2
1
ANT. IN  
R
L
AUDIO OUT  
AV1 IN/OUT  
AV2 IN  
RF OUT  
5
2
6
3
REAR VIEW [J2 4 5 EK/ J2 4 6 EK]  
1
ANT. IN  
RF OUT  
AV2 IN  
AV1 IN/OUT  
5
3
4
1 Mains Power Cord supplies power to recorder.  
pg. 4  
2 ANT. IN Connector enables connection of aerial.  
pg. 4  
3 AV2 IN Connector enables connection of  
satellite receiver or second recorder; input  
recordable when "AU 2" selected. pg. 32, 28  
4 AV1 IN/OUT Connector enables AV connec-  
tion to TV or second recorder; input recordable  
when "AU-1" selected. pg. 4, 28  
5 RF OUT Connector enables connection to  
aerial terminal of TV receiver. pg. 4  
6 AUDIO OUT (L/R) Connectors enable  
connection of audio cassette recorder, TV or  
second video recorder for dubbing. pg. 31  
(HR-J645EK/ES only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX (cont.)  
52  
DISPLAY PAN EL  
1
2
3 4 5  
6
7
REVIEW  
M
SPLPEP  
REMAIN  
8
9 0  
!
1 B.E.S.T. Picture System Display lights from  
bottom to top while B.E.S.T. is active. pg. 20  
2 Symbolic Mode Indicators  
7 Instant REVIEW Indicator blinks after timer-  
recording and shows how many programmes  
have been timer-recorded. pg. 14  
8 "Cassette Loaded" Mark lights once a cassette is  
inserted; remains lit until cassette ejected or  
power turned off.  
9 Tape Speed Indicators display mode of record-  
ing; light during Record or Play mode. pg. 18  
0 Tape Remaining Time Indicator displays time  
remaining on tape when certain buttons are  
pressed. pg. 19  
STILL:  
SLOW:  
PLAY:  
FF/REW VARIABLE  
SHUTTLE SEARCH:  
RECORD:  
RECORD PAUSE:  
3 "Timer" Indicator lights when TIMER has been  
pressed to engage Timer mode. pg. 23, 25  
4 PDC Indicator lights when PDC has been  
engaged for timer recording. pg. 22, 24  
5 Counter Memory Indicator lights when the  
video recorder is in the Counter Memory mode.  
pg. 15  
!
Counter shows time elapsed since playback or  
recording began.  
REMAIN displays time remaining from current  
tape position to end of tape.  
Counter, Preset Position*, Clock and REMAIN  
Display appear alternately when DISPLAY is  
pressed.  
6 Channel Display shows preset position where  
the station currently being received is stored.  
(Ex.) Preset position 1 will be displayed as "CH 1".  
Mode shows external input mode selected.  
Clock Display shows current time. pg. 9, 44  
* Preset Position is not displayed during playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
REMO TE CO N TRO L  
1 DISPLAY Button switches display between  
1
2
^
clock time, tape remaining time, counter  
readings, preset position*. pg. 19  
* Preset position is not displayed during playback.  
&
*
(
3
TV/VCR  
(MONITOR).  
TV  
DISPLAY  
2
2 TV Button enables remote control of your JVC  
TV. "Operating JVC TVs" on page 54.  
3 NUMBER Keys are used in preset position  
selection pg. 18, Video Plus+ timer program-  
ming pg. 22.  
4 ADD TIME Button adds time to end of Video  
Plus+ timer recording (5 minutes each time  
button is pressed.) pg. 23  
4
5
6
7
8
9
1
4
7/  
3
)
5/ADD TIME  
8/DAILY  
0/AUX  
6
q
w
e
r
CANCEL  
9/WEEKLY  
/C.RESET  
PROG CHECK  
2
4
TIMER  
EXPRESS PROGRAMMING  
5 DAILY Button enables timer recording of daily  
serials. pg. 23, 25  
0
TV PROG  
t
y
u
START  
STOP  
DATE  
1
REW 3PLAY  
FF  
¡
6
(PDC) Button enables/disables PDC record-  
ing. pg. 22, 25  
!
@
#
$
REC  
7STOP  
8PAUSE  
7 AUX Button selects recorder's auxiliary input  
mode. pg. 28  
i
TV VOL  
PROG  
1
/MENU  
4
¢
8 PROG. CHECK Button accesses Program  
screens/displays to check the program that you  
have programmed (next program's information  
screen appears each time button is pressed).  
pg. 26  
3
OK  
o
C.MEMORY  
TV VOL  
PUSH JOG  
p
%
Press and hold TV button while pressing  
, TV PROG. + / –, TV / VCR  
9 STOP +/– Button inputs programme Stop Time.  
pg. 24  
0 START +/– Button accesses Regular Program  
screen; inputs programme Start Time. pg. 24  
!
Rewind [REW] Button — same as button on  
recorder. pg. 12  
@ Play Button — same as button on recorder.  
pg. 12  
# Record Button — same as button on recorder.  
pg. 18  
$ PROG./MENU Button accesses Program screen  
(press once) or Main Menu screen (press twice).  
pg. 22, 10  
Buttons with a small dot on the left side of the  
name can also be used to operate your TV  
while holding down the TV button. pg. 54  
% OK Button enters selections made in on-screen  
menus. pg. 10  
C. MEMORY Button engages Counter Memory  
mode. pg. 15  
^ TV/VCR Button switches connected TV's mode  
between TV and AV. pg. 54  
& STANDBY/ON  
Button — same as button on  
recorder. pg. 8  
* REVIEW Button "reviews" timer-recorded  
programme. pg. 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
(
AUDIO MONITOR Button changes output  
sound mode. pg. 16  
(TV Mute) Button mutes sound of con-  
Installing Batteries  
1
2
Open the battery compartment cover.  
Insert 2 "AA"-size batteries (provided) in the correct  
directions.  
nected TV. (See right.)  
3
Replace the cover.  
)
WEEKLY Button enables timer recording of  
weekly serials. pg. 23, 25  
q CANCEL Button erases previously entered data  
in on-screen selection menus. pg. 11  
C. RESET Button resets counter to 0:00:00.  
pg. 19  
w SP/LP Button selects tape speed. pg. 18  
Auto Tracking Button enables/disables auto  
tracking mode during playback pg. 14  
e TIMER Button — same as button on recorder.  
pg. 23, 25  
r
DATE +/– Button inputs date of program for  
timer recording. pg. 24  
t
TV PROG. +/– Button — same as button on  
recorder. pg. 18  
How To Use  
The remote control can operate most of your video recorder's  
functions, as well as basic functions of JVC TV sets. (See  
below.)  
Point the remote control toward the sensor window.  
The maximum operating distance of the remote control  
is about 8 m.  
y Fast Forward Button — same as button on  
recorder. pg. 12  
u Stop Button — same as button on recorder.  
pg. 12  
i
Pause Button — same as button on recorder.  
pg. 13  
Button is used for selection  
in on-screen menus. pg. 10  
Operating JVC TVs  
To operate your TV, while holding down TV, press the  
corresponding button: STANDBY/ON  
PROG. +/–, (TV Mute). TV VOL. +/– can be used  
, TV/VCR, TV  
o PUSH JOG %fi  
without holding down TV.  
PUSH JOG  
Button initiates functions such  
as Index Search pg. 15, variable-speed  
search, frame by frame playback. pg. 13  
p TV VOL %fi Button controls volume of con-  
nected TV. (See right.)  
N O TES:  
Depending on the type of JVC TV, there may be cases  
where some or all functions cannot be operated using the  
remote control.  
If the remote control doesn't work properly, remove its  
batteries, wait a short time, replace the batteries and then  
try again.  
If for some reason the remote control doesn't work  
properly, remove its batteries, wait a short time and then  
try again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Johnson Controls Air Conditioner 13 SEER GCGD User Manual
JVC Car Stereo System GET0309 001A User Manual
JVC CD Player GET0253 003A User Manual
JVC CRT Television AV 27D200 User Manual
JVC MP3 Player XA HD500S User Manual
JVC Stereo System 0803AIMMDWJEM User Manual
Kenmore Microwave Oven 88329 User Manual
Kenmore Washer 11025844400 User Manual
Kenwood Food Processor FP215 User Manual
KitchenAid Frozen Dessert Maker 165 User Manual