JVC VCR HR A592UC User Manual

VIDEO CASSETTE RECORDER  
HR-A592U  
INSTRUCTIONS  
Printed in Thailand  
LPT0778-001A  
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.  
K
J4F90201A  
02/12  
Dear Customer,  
CAUTION:  
Thank you for purchasing the JVC VHS video cassette recorder.  
Before use, please read the safety information and precautions to  
ensure safe use of your new VCR.  
Changes or modifications not approved by JVC could void user’s  
authority to operate the equipment.  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
CAUTIONS  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
The lightning flash with arrowhead symbol, within  
an equilateral triangle, is intended to alert the user  
to the presence of uninsulated “dangerous voltage”  
within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric  
shock to persons.  
Consult the dealer or an experienced radio/TV technician for help.  
Failure to heed the following precautions may result in damage  
to the VCR, Remote or video cassette.  
1
DO NOT place the VCR . . .  
...in an environment prone to extreme temperatures or humidity.  
...in direct sunlight.  
The exclamation point within an equilateral triangle  
is intended to alert the user to the presence of  
important operating and maintenance (servicing)  
instructions in the literature accompanying the  
appliance.  
...in a dusty environment.  
...in an environment where strong magnetic fields are generated.  
...on a surface that is unstable or subject to vibration.  
2. DO NOT block the VCR’s ventilation openings.  
3. DO NOT place heavy objects on the VCR or on the Remote.  
4. DO NOT place anything which might spill on the top of the VCR  
or on the Remote.  
WARNING:  
5. AVOID violent shocks to the VCR during transport.  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE  
THIS UNIT TO RAIN OR MOISTURE.  
For Customer Use:  
Enter below the Model No. and Serial No. which are located  
CAUTION:  
on the rear of cabinet. Retain this information for future  
This video cassette recorder should be used with AC 120V~,  
60Hz only.  
To prevent electric shocks and fire hazards, DO NOT use any  
other power source.  
reference.  
Model No.  
Serial No.  
CAUTION:  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG  
TO WIDE SLOT, FULLY INSERT.  
ATTENTION:  
• Cassettes marked “VHS” (or “S-VHS”) can be used with this video  
cassette recorder. However, S-VHS recording is not possible with  
this model.  
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK)  
that makes it possible to play back S-VHS recordings with regular  
VHS resolution.  
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA  
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE  
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU  
FOND.  
• HQ VHS is compatible with existing VHS equipment.  
• As an Energy Star® Partner, JVC has determined that this product  
or product model meets the Energy Star® guidelines for energy  
efficiency.  
Note to CATV system installer:  
This reminder is provided to call the CATV system installer’s  
attention to Article 820-40 of the NEC that provides guidelines  
for proper grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of the  
building, as close to the point of cable entry as practical.  
*J4F90201A*  
Download from Www.Somanuals.com. All Manuals Search And Download.  
d. If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to restore  
the product to its normal operation.  
Buttons, Connectors and Indicators  
e. If the product has been dropped or damaged in any way.  
f. When the product exhibits a distinct change in performance—  
this indicates a need for service.  
Front Panel  
REC  
3. Replacement Parts  
POWER  
When replacement parts are required, be sure the service technician  
has used replacement parts specified by the manufacturer or which  
have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other hazards.  
STOP/EJECT  
Cassette loading slot  
PLAY  
4. Safety Check  
Upon completion of any service or repairs to this product, ask the  
service technician to perform safety checks to determine that the  
product is in safe operating condition.  
How to use the Remote  
Before use, insert two AAA size batteries into the Remote with the  
VIDEO/AUDIO (L/R)  
input connectors  
FF  
CH+/–  
polarity ( and ) matched correctly as indicated on the battery  
compartment or on the lid.  
Remote  
sensor  
REW  
Point the Remote toward the remote sensor on the target  
component.  
The maximum operating distance of the remote control is about 5  
m.  
Display Panel  
NOTE:  
If the Remote does not work properly, remove its batteries, wait for a  
few seconds, replace the batteries and then try again.  
Recording  
Timer  
Record  
VCR  
PM  
Video heads cleaning  
Use a dry cleaning cassette TCL-2when:  
Rough, poor picture appears while a tape is played back.  
The picture is unclear or no picture appears.  
Play/Still/  
Recording  
Pause  
Multi-Function Display  
Rear Panel  
AC power cord  
UHF/VHF IN (ANT)  
UHF/VHF OUT (TV)  
VIDEO/AUDIO (L/R) OUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– Buttons, Connectors and Indicators –  
Remote  
Connections and VCR channel  
Setting  
POWER  
POWER  
Check contents  
Make sure the package contains all of the accessories listed  
in Specifications.  
Situate VCR  
Place the VCR on a stable, horizontal surface.  
1
1
4
7
2
5
8
3
6
9
Number keys  
CH/+  
2
AUX  
REC  
+
0(AUX)  
CH  
PAUSE  
PLAY  
Connect VCR to TV  
3
REC  
PAUSE  
PLAY  
REW  
Antenna or cable  
Coaxial cable  
REW  
FF  
FF  
STOP  
ENTER  
TIMER  
MENU  
ENTER  
STOP  
SET  
MENU  
Flat feeder  
+
Matching transformer  
(not supplied)  
CANCEL  
C.RESET  
SP/EP  
CANCEL  
SET/+  
TV/VCR  
TV/VCR  
TIMER  
SP/EP  
C.RESET  
DISPLAY  
+
A.MONITOR  
TV POWER  
INPUT  
A.MONITOR  
TV CH  
DISPLAY  
TV POWER  
INPUT  
+
TV VOL  
TV CH/+  
TV VOL/+  
This Remote transmit A code  
signals only; it is not applicable  
to B code signals.  
Back of VCR  
On-screen display  
TV  
To 75 terminal  
RF cable (supplied)  
If you press DISPLAY on the Remote, you can see the current VCR  
status on the TV screen. Press DISPLAY again to exit on-screen  
display.  
The indications are not recorded even if the VCR is in the recording  
mode.  
Audio/video cable (not supplied)  
To audio/video input connectors  
WHILE WATCHING TV  
RF Connection  
DAY AND CLOCK TIME  
CHANNEL  
1
2
Disconnect the TV antenna from the TV.  
Connect the TV antenna cable to the UHF/VHF IN  
terminal on the rear of the VCR.  
Connect the supplied RF cable between the UHF/VHF  
OUT terminal on the rear of the VCR and the TVs  
antenna input terminal.  
STEREO AND  
SEPARATE AUDIO  
PROGRAM (SAP)  
3
TAPE  
OUTPUT  
SPEED  
SELECTION  
REAL TIME COUNTER  
AV Connection  
(improves picture quality during tape playback.)  
If your TV is equipped with audio/video input connectors  
WHILE OPERATING A TAPE  
OPERATING MODE  
1
Connect the antenna, VCR and TV as shown in the  
illustration.  
Connect an audio/video cable between the AUDIO/  
VIDEO OUT connectors on the rear of the VCR and the  
audio/video input connectors on the TV.  
HI-FI STEREO  
2
AUTO REPEAT  
TAPE IN  
AUTO TRACKING  
Even if you are using audio/video cables to connect your  
VCR to your TV, you must also connect it using the RF  
cable. This will ensure that you can record one show while  
watching another.  
OUTPUT  
SELECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and VCR channel Setting –  
Initial Settings –  
Auto Clock Setting  
4
Set VCR channel  
Connect the Antenna or Cable system.  
If you use a cable box, turn it on.  
To view playback of a recorded tape, or to watch a program  
selected by the VCR's channel selector, the TV must be set to  
channel 3 or 4 (video channel) when a TV is connected with  
the 75 ohm coaxial cable only.  
1
2
3
Plug the AC Power cord to the AC outlet.  
Make sure the VCR is turned off.  
If you press POWER, the Auto Clock set is not effective.  
1
Press and hold 3 or 4 on the  
Remote for 3 seconds in standby  
mode. The video channel will  
start to flash in the display.  
4
5
6
Wait at least three minutes and press POWER.  
Press DISPLAY to check the clock on the TV screen.  
2
3
Turn ON the TV and set to CH 3  
or 4 to correspond with the  
channel selected in step 1.  
If the clock is not set, check the Antenna condition. The  
Auto Clock may not function properly if the reception  
condition is not good.  
Turn on the VCR and select any  
channel to receive a TV station  
in your area. The channel  
Auto Clock Adjustment  
number will appear on the screen and display for about  
4 seconds.  
The Auto Clock Adjustment will be performed at 12:00 PM  
everyday if you turn off the VCR.  
If you use a cable box and you want Auto Clock adjustment  
to be performed, the cable box must be left on.  
The Auto Clock Adjustment is not effective when there is a  
difference of more than 5 minutes exists between the built-  
in clock time and the actual time.  
Initial Settings  
Language Setting  
MENU  
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
The default setting is ENGLISH.  
To Set Auto Clock To Off  
ON OFF  
Access Menu screen  
1
When shipped from factory AUTO CLOCKoption is set to ON.  
But if you do not want Auto Clock set (Adjustment):  
Press MENU on the Remote. Press SET  
/+ to select SYSTEM SETUP, then  
press ENTER.  
+/-/ENTER/MENU⟩  
Turn on the VCR.  
1
2
3
Press MENU.  
Access Language screen  
Press SET /+ to select LANGUAGE,  
then press ENTER.  
2
Press SET /+ to select SYSTEM SETUPoption, then  
press ENTER.  
Press SET /+ to select AUTO CLOCKoption.  
4
5
6
Press ENTER to select OFF.  
Select language  
3
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
This VCR offers you the language  
choice to view menus and some  
messages in English, Spanish or  
French. Press SET /+ to select your  
desired language, then press ENTER.  
Press MENU repeatedly to return to the normal screen.  
When AUTO CLOCKis set to OFF, the Auto Clock  
adjustment does not function. Set the clock manually.  
FRANCAIS  
+/-/ENTER/MENU⟩  
To Set Standard Time  
Press MENU twice to return to normal screen.  
In the rare event that you live within broadcast range of two  
stations in two different time zones, the VCR may recognize  
the wrong station for the Auto Clock set.  
Clock Setting  
Preparations  
To correct the situation:  
You must set the date and time for timer recording.  
Press MENU.  
1
2
Auto Clock Setting  
Press SET /+ to select SYSTEM SETUPoption, then press  
ENTER.  
The Auto Clock function will automatically set the built-in  
clock (Month, Day, Year and Time) when the VCR is  
connected to an Antenna or Cable system and it is turned  
off. As the VCR searches for a receivable station in your area  
and it receives a broadcast signal for Auto Clock, the Auto  
Clock needs several minutes to set itself.  
Press SET /+ to select STANDARD TIMEoption, then  
press ENTER.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings –  
Press SET /+ to select your time zone, then press  
ENTER.  
4
Tuner Setting  
This VCR is equipped with a channel memory feature which  
allows channels to skip up or down to the next channel set  
into memory, skipping over unwanted channels. Before  
selecting channels, they must be programmed into the VCRs  
memory. In addition to normal VHF and UHF channels, this  
VCR can receive up to 113 Cable TV channels. To use this  
VCR with an antenna, set the TV/CATV menu option to the  
TV mode. When shipped from the factory, this menu option  
is in the CATV mode.  
ATLANTIC  
:
GMT 4 hours  
(GMT: Greenwich Mean Time)  
GMT 5 hours  
GMT 6 hours  
GMT 7 hours  
GMT 8 hours  
GMT 9 hours  
GMT 10 hours  
AUTO SET  
EASTERN  
CENTRAL  
MOUNTAIN  
PACIFIC  
ALASKA  
HAWAII  
AUTO  
:
:
:
:
:
:
:
5
Press MENU twice to return to the normal screen.  
TV/CATV Selection  
NOTE: To be able to select the standard time, the clock must  
first be set by AUTO CLOCKonce.  
Access Menu screen, then CH  
MENU  
1
TIMER REC SET  
AUTO REPEAT ON OFF  
Setup screen  
ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
Press MENU on the Remote. Press  
SET /+ to select CH SETUP, then  
press ENTER.  
Manual Clock Setting  
MENU  
+/-/ENTER/MENU⟩  
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
Access Menu screen  
1
ON OFF  
Press MENU on the Remote. Press  
SET /+ to select SYSTEM SETUP,  
then press ENTER.  
CH SETUP  
TV  
Perform TV/CATV Selection  
2
CATV  
+/-/ENTER/MENU⟩  
Press SET /+ to select TV/CATV,  
then press ENTER to select the TV  
or CATV mode. The arrow indicates  
the selected mode.  
AUTO CH MEMORY  
ADD/DELETE  
Access Clock Set screen  
Press SET /+ to select CLOCK SET,  
then press ENTER.  
2
+/-/ENTER/MENU⟩  
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
Press MENU twice to return to normal screen.  
Set month, day, year and time  
3
Press SET /+ until the desired month  
appears, then press ENTER. Set the  
day, year and time in the same way.  
Setting channels automatically  
Auto Channel Memory  
The VCR can receive a maximum of  
MENU  
181 channels by presetting the  
TIMER REC SET  
4 Start clock  
Press MENU to return to normal  
screen.  
AUTO REPEAT ON OFF  
channels into memory.  
ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
Access Menu screen, then CH  
Setup screen  
1
+/-/ENTER/MENU⟩  
Press MENU on the Remote. Press  
SET /+ to select CH SETUP, then  
press ENTER.  
CH SETUP  
TV  
AUTO CH MEMORY  
ADD/DELETE  
To make corrections any time during the process  
CATV  
Press CANCEL repeatedly until the item you want to change  
blinks, then press SET /+.  
2
Perform Auto Channel Memory  
Press SET /+ to select AUTO CH  
NOTE:  
MEMORY, then press ENTER.  
+/-/ENTER/MENU⟩  
After a power failure or disconnection of the power, the  
timer settings will be lost. In this case, reset the present time.  
3
Complete Auto Channel Memory  
The auto tuning will start. The  
channel display will count up and  
when finished, the screen returns to  
normal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings –  
Setting channels manually  
Playback  
Manual Channel Set  
Basic Playback  
You can add the channels you want or delete the channels  
you do not want manually.  
Load a cassette  
1
MENU  
Access Menu screen, then  
CH Setup screen  
1
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
ON OFF  
Press MENU on the Remote.  
Press SET /+ to select CH  
SETUP, then press ENTER.  
+/-/ENTER/MENU⟩  
CH SETUP  
TV  
Access ADD/DELETE Mode  
2
Make sure the window side is up, the rear  
label side is facing you and the arrow on  
the front of the cassette is pointing  
towards the VCR.  
CATV  
Press SET /+ to select ADD/  
DELETE, then press ENTER.  
AUTO CH MEMORY  
ADD/DELETE  
Do not apply too much pressure when  
inserting.  
The VCR turns on, and the counter is  
reset, automatically.  
+/-/ENTER/MENU⟩  
Add or Delete desired  
channels  
3
If the cassettes record safety tab has been removed, playback  
begins automatically.  
If you press any operation buttons while the cassette is not  
1
Press SET /+ on the Remote to  
select a channel number you  
want to add or delete.  
loaded, “  
will flash on the screen for 4 seconds.  
2
To add channels  
Press ENTER until ADDappears on the screen to set to  
add the unmemorized channel.  
Start playback  
2
Press PLAY ( ).  
To delete channels  
Press ENTER until DELETEappears on the screen to set  
to delete the channel from memory.  
During playback  
Stop playback  
Repeat to to add or delete other channel.  
1
2
3
Press MENU three times to return to normal screen.  
OR Press STOP/EJECT (I/  
on the VCR.  
Press STOP ( ) on the  
Remote.  
)
NOTE: You cant select CH SET UPif you set the channel  
to L.  
Pause playback and view still picture  
Press PAUSE.  
Press PLAY ( ) to resume  
normal playback.  
Pause and Frame-by-Frame playback  
Press PAUSE to pause, then  
press PAUSE repeatedly.  
Press PLAY ( ) to resume  
normal playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback –  
Playback Features  
Slow-motion  
Press PLAY ( ) on the  
Remote.  
Playback will proceed at  
1/10 th of the normal speed.  
Press PLAY ( ) to resume  
normal playback.  
OR Press Play ( ) on the  
Adjusting tracking condition  
VCR.  
Tracking Adjustment  
Automatic tracking adjustment  
Whenever you insert a tape and start playback, automatic  
tracking starts working and continuously analyzes the signal  
to enable optimum picture quality during playback.  
Manual tracking adjustment  
NOTE:  
During slow motion picture, some noise might appear on  
the TV screen. Use the SET/+ on the Remote to eliminate  
the noise.  
If automatic tracking cannot eliminate noises well during  
playback, press SET /+ on the Remote to eliminate the  
noises. Press it briefly for a fine adjustment, or press and  
hold for a coarse adjustment.  
Speed search  
Press SP/EP on the Remote again to reactivate automatic  
tracking.  
Press REW (  
) or FF  
OR Press REW (  
) or  
(
) on the Remote.  
FF ( ) on the VCR.  
Press PLAY ( ) to resume  
normal playback.  
Variable speed search  
Playing back tape repeatedly  
Press REW (  
) or FF  
OR Press REW (  
) or FF  
Auto Repeat Play  
(
) repeatedly on the  
(
) repeatedly on  
Remote.  
the VCR.  
MENU  
Access Menu screen  
Press MENU on the Remote.  
1
TIMER REC SET  
AUTO REPEAT ON OFF  
Press PLAY ( ) to resume  
normal playback.  
Each time you press REW  
ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
Press SET /+ to select AUTO  
REPEAT.  
(
) or FF (  
) the  
playback speed changes.  
+/-  
/ENTER/MENU⟩  
MENU  
Select ON/OFF  
Press ENTER to select ONor  
OFF.  
Press MENU to return to normal  
screen.  
2
3
TAPE SPEED  
PICTURE SEARCH SPEED  
PRESS ONCE  
3X  
9X  
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
ON OFF  
PRESS TWICE  
5X  
15X  
SP  
EP  
+/-/ENTER/MENU⟩  
When the tape is not running  
Rewind/fast-forward  
Start Auto Repeat Play  
Press PLAY. The tape will play  
over and over until the repeat  
mode is canceled.  
Press REW (  
) or FF  
OR Press REW (  
) or FF  
(
) on the Remote.  
(
) on the VCR.  
Eject the tape  
Press STOP/EJECT (I/ ) on  
the VCR.  
You can also eject the  
cassette when the VCR is  
turned off.  
Turn off the VCR  
Press POWER on the  
Remote.  
OR Press POWER ( /l) on  
the VCR.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Features  
Recording  
Specifying recording length  
It may be unlawful to record or play back copyrighted  
material without the consent of the copyright owner.  
Accidental erasure prevention  
- Instant Timer Recording (ITR)  
The Instant Timer Recording feature provides a simple  
and convenient way to make a timed  
recording.  
To prevent accidental recording on a recorded  
cassette, remove its record safety tab.  
To record on it later, cover the hole  
with adhesive tape.  
EXAMPLE: Instant Timer Recording for 30 minutes.  
Record safety tab  
When a TV is connected with an audio/video cable, turn the  
TV on and select the video input mode on the TV.  
Basic Recording  
Load a cassette  
1
Load a cassette tape with the  
1
Make sure the record safety tab is intact. If not, cover the  
hole with adhesive tape before inserting the cassette.  
The VCR turns on, and the counter  
is reset, automatically.  
erase prevention tab intact. The  
clock display will change in the  
counter display.  
If you press any operation buttons  
while the cassette is not loaded,  
Press SP/EP to select the desired  
2
will flash on the screen for 4  
tape speed SP or EP.  
The counter and SP or EP will  
appear on the screen for about 4  
seconds.  
seconds.  
2 Select recording channel  
Press CH/+ or the Number keys on  
00 : 00 : 00 SP  
the Remote [CH/+ on the VCR].  
Press the Number keys or CH /+  
to select the channel to be  
recorded.  
3
If you connect the TV and the VCR  
only using the RF connection, press  
TV/VCR on the Remote so that the  
VCR mode indicator lights on the display panel, to view the  
program to be recorded.  
The channel number will appear  
on the screen and display for  
about 4 seconds.  
Set tape speed  
Press SP/EP.  
3
ITR 0 : 30  
CH 125  
Press REC on the VCR or while  
holding REC, press PLAY ( ) on  
4
the Remote to begin recording.  
00 : 00 : 00 SP  
Press REC on the VCR again to  
stop recording after 30 minutes.  
Each additional press of REC will  
increase recording time as shown in the chart below, up  
to a maximum of 6 hours. The ITR and recording time  
will appear on screen for about 4 seconds.  
4
Start recording  
On the VCR, press REC. Or on the  
Remote, while holding REC, press  
PLAY ( ).  
NOTES: Press REC to increase  
the time needed for  
recording (See the  
chart).  
Press  
Recording time  
NORMAL REC  
0:30  
once  
During recording  
Pause recording  
twice  
3 times  
4 times  
5 times  
6 times  
7 times  
8 times  
9 times  
1:00  
To cancel ITR, press  
STOP ( ) or turn off  
the power.  
1:30  
Press PAUSE.  
2:00  
Press PAUSE on the Remote or  
REC on the VCR to resume  
recording.  
3:00  
4:00  
5:00  
You can select channel in the  
recording pause mode.  
6:00  
10 times NORMAL REC  
Stop recording  
Watching one program while recording another  
During recording…  
If you connect the TV and the VCR only using the RF  
connection to view pictures from the VCR, press TV/VCR  
on the Remote so that VCR mode indicator goes off from  
the display panel. (The TV broadcast being recorded  
disappears.)  
OR Press STOP/EJECT  
(I/ ) on the VCR.  
Press STOP ( ) on the  
Remote.  
If you are using the AV connection to view pictures from  
the VCR, change the TVs input mode from AV to TV.  
Then, select the channel you want to watch, on the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO CORRECT THE SETTINGS  
When setting the Timer Recording, press ENTER until the  
desired setting blinks, then re-enter the setting using SET /+.  
When finished, press ENTER.  
Timer Recording  
Timer recording can be programmed on-screen with  
the remote control. The built-in timer allows automatic  
unattended recording of up to 8 programs within 1  
month.  
NOTES: The VCR cannot be used while the TIMER REC  
indicator ( ) is lit.  
NOTES:  
After timer recording is completed, the VCR turns off  
automatically.  
After a power failure or disconnection of the  
power plug, all programmed recording settings  
must be reset upon resumption of power. In this  
case, reset the clock and reprogram any timer  
recordings.  
Press CANCEL to move cursor backward for  
correction.  
You can program the timer recording while a regular  
recording is in progress; the menu screens will not be  
recorded.  
The timer recording will start at 5 seconds before the time  
you predetermined.  
EXAMPLE: Program a timer recording for the 26th day,  
channel 125 (CATV), 11:00 - 11:30 PM on timer program  
number 1 (Tape speed: EP).  
TO SET DAILY/WEEKLY TIMER  
When setting the date in step 3 in the Setting the Timer  
Recording section, press SET repeatedly.  
The setting changes as follows:  
When a TV is connected with an audio/video cable, turn the  
TV and this VCR on and select the video input mode on the  
TV.  
Example  
MENU  
Press MENU on the Remote.  
Check the TIMER REC SET”  
option is selected, then press  
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
1
The current day (Friday)  
SU-SA (Sunday to Saturday)  
ON OFF  
MO-SA (Monday to Saturday)  
MO-FR (Monday to Friday)  
WKL-TH (Weekly Thursday)  
ENTER.  
One month later  
minus one day  
+/  
-/ENTER/MENU⟩  
Press SET /+ to select one of  
the program lines, then press  
ENTER.  
2
DATE START END  
CH  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
WKL-WE  
(Weekly Wednesday)  
Press SET /+ to select the  
date, then press ENTER.  
3
4
TO CONFIRM THE SETTINGS  
+
-
/ /ENTER/CANCEL/MENU  
Set the start time, end time,  
channel and tape speed as in  
step 3.  
Press SET /+ to select the  
TIMER REC SEToption in the  
MENU. Then press ENTER to  
display the timer program list.  
Press MENU twice to return to  
the normal screen.  
DATE START END  
CH  
DATE START END  
CH  
26(SU) 11:00PM 11:30PM 125 EP  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
-:-- -:-- --- -  
26(SU)  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
NOTE: To record from external  
source, press SET /+  
and set the channel to  
"L". "L" will appear next  
to CH 125 (or 69).  
+
/ENTER/CANCEL/MENU  
-
/
+
-
/ /ENTER/CANCEL/MENU  
DATE START END  
CH  
26(SU) 11:00PM 11:30PM 125 EP  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
To enter other programs,  
repeat step 2 through 4. Or,  
press MENU twice to return  
to the normal screen.  
5
6
TO CANCEL A PROGRAM  
Press the SET /+ to select the  
TIMER REC SEToption in the  
MENU. Then press SET /+ to  
select the unnecessary program,  
and press CANCEL to cancel the  
program.  
DATE START END  
CH  
+
/ENTER/CANCEL/MENU  
-
/
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
Press TIMER on the Remote.  
The power will go off, the  
TIMER REC indicator ( ) will  
light and the VCR stands by  
for recording.  
DATE START END  
CH  
26(SU) 11:00PM 11:30PM 125 EP  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
------ -:-- -:-- --- -  
+
-
/ /ENTER/CANCEL/MENU  
+
-
/ /ENTER/CANCEL/MENU  
To use the VCR while it is in timer recording standby mode  
Press TIMER. After you use the VCR, press TIMER again  
to put the VCR into timer recording standby mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recordings –  
IF THE PROGRAM OVERLAPS ANOTHER  
Other Functions  
Changing display information  
Each time you press DISPLAY, the display  
panel shows the time counter and the clock  
time alternatively.  
NOTE: Do not overlap programs as portions of the  
conflicting programs will be lost. The first  
recording time has priority over the next recording  
time as shown in the diagram.  
When DISPLAY on the Remote is pressed,  
time counter will appear on the TV screen.  
To reset the time counter, press C. RESET on the Remote.  
8 : 00  
9 : 00  
10 : 00  
11 : 00  
Program 1  
Program 2  
Deleted Parts  
BLUE BACK ON/OFF  
Program 3  
Non Recorded Portion Parts  
When this function is set to ON, the TV screen becomes all  
blue in the following case:  
Recording  
Control Settings  
Prog.1  
Prog.2  
Prog.3  
When receiving a channel not in use.  
NOTES: The everyday/every week recording can be made  
continuously until the recording is canceled or  
the tape reaches the end.  
1
Press MENU on the remote. Press SET /+ to select  
SYSTEM SETUP.  
2 Press SET /+ to select NO NOISE BACKGROUND.  
3
4
During timer recording, the automatic rewinding  
mechanism does not function.  
Press ENTER to select ON.  
Press MENU to return to normal screen.  
STEREO RECORDING AND PLAYBACK  
RECORDING STEREO BROADCASTS  
The VHS Hi-Fi audio system permits high fidelity recording of  
MTS STEREO TV broadcasts.  
When a MTS STEREO broadcast is  
STEREO  
received, the STEREO will appear on the  
screen for about 4 seconds and the  
program can be viewed or recorded in  
stereo.  
The Hi-Fi STEREO recording procedure  
is the same as for normal recordings.  
NOTE: When using a CATV system, stereo TV programs may be  
transmitted over a mono cable channel. In this case the word  
"STEREO" will not appear and the sound will be in mono.  
OUTPUT SELECTION  
When viewing an MTS STEREO TV program, or playing a  
prerecorded VHS Hi-Fi STEREO videotape, press A.MONITOR to  
select how the audio will be heard through the speakers. Normally  
set to the Hi-Fi STEREO position, this button can be set to the  
MONO position if the stereo broadcast or videotape audio is of  
poor quality. The "R" and "L" positions allow the audio from the  
Right or Left Hi-Fi channel to be heard over both TV speakers.  
This button has no effect when viewing a MONO videotape or TV  
program. Each time when you press the button, OUTPUT  
SELECTION display appears on the screen for several seconds.  
Refer to the chart below.  
OUTPUT  
SELECTION  
SOUND HEARD ON BOTH  
SPEAKERS  
STEREO  
L ch  
R ch  
STEREO  
LEFT CHANNEL AUDIO  
RIGHT CHANNEL AUDIO  
MONO  
MONO  
NOTES: When playing back a tape that is not recorded in  
Hi-Fi stereo mode, the audio will automatically be  
monaural.  
When listening to a VHS Hi-Fi video tape or MTS  
broadcast through the VHF/UHF jack (Audio/  
Video cord not connected), the sound will be  
monaural.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Functions –  
Editing  
SEPARATE AUDIO PROGRAM (SAP)  
Your VCR is fitted with an SAP broadcast system which enables  
you to switch to a SEPARATE AUDIO PROGRAM when viewing a  
selected channel.  
You can use your VCR as the playback or recording VCR.  
You can use a camcorder as the playback VCR and your VCR  
as the recording VCR. Refer also to the other components’  
instruction manuals for connection and its operations.  
This function applies only when the program is broadcast in  
multi-languages through the SAP broadcast system.  
When a TV is connected with an audio/video cable, turn the TV and  
this VCR on, and select the video input mode the TV.  
1
Make connections  
Example: When using this VCR as the playback VCR  
MENU  
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
Press MENU on the Remote.  
1
Press SET /+ to select SAP”  
ON OFF  
option.  
Press ENTER to select ON”  
This VCR (for playback)  
To audio/video out  
2
3
+/  
-
/ENTER/MENU⟩  
position.  
MENU  
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
Press MENU to return to  
normal screen.  
ON OFF  
+/-/ENTER/MENU⟩  
Audio/video cable (not  
supplied)  
LISTENING TO SAP  
When the VCR is turned on or a channel selection is made, make  
certain "SAP" appears on the screen for about 4 seconds.  
This means that the "Separate Audio Program" broadcasting is available.  
STEREO SAP  
SAP  
To audio/video input  
OR  
Another VCR (for recording)  
DAYLIGHT SAVING TIME SETTING  
You can set the Daylight saving time automatically or manually.  
Press MENU. Press SET /+ to select  
SYSTEM SETUPoption, then press  
ENTER.  
MENU  
1
TIMER REC SET  
AUTO REPEAT ON OFF  
SAP  
CH SETUP  
SYSTEM SETUP  
When using this VCR as the recording VCR, connect this  
VCRs audio/video input connectors to the audio/video  
output connectors on the other VCR. If the playback VCR  
is monaural, connect the audio output connector on the  
playback VCR to the left audio input connector on this  
VCR.  
ON OFF  
Press SET /+ to select DAYLIGHT  
SAVING TIMEoption, then press  
ENTER.  
2
3
+/-/ENTER/MENU⟩  
Press SET /+ to select one of the  
options, then press ENTER. Press  
MENU until the MENU screen is  
cleared.  
2 Load cassettes  
Insert the playback cassette into the playback VCR and the  
cassette to be recorded on into the recording VCR.  
ON:  
for manual setting  
(forward one hour)  
OFF: for manual setting  
(back one hour)  
AUTO: for automatic setting  
(read XDS in the signal)  
DAYLIGHT SAVING TIME  
3
ON  
Select input mode on recording VCR  
OFF  
AUTO  
When you want to set the Daylight Saving  
Time manually, on the first Sunday in April  
you set to ON, and on the last Sunday in  
October you set to OFF.  
Select the correct external input on the recording VCR.  
On this VCR (when using this VCR as the recording VCR);  
Select L” — when connecting the other VCR to the audio/video  
input connectors on the front panel.  
+/-/ENTER/MENU⟩  
NOTES: When shipped from factory, the DAYLIGHT SAVING  
TIME option is set to AUTO position.  
Press O (AUX) or CH/+ on the Remote [CH/+ on the VCR].  
When the clock is not set, Daylight Saving Time setting is  
not available.  
4
Start playback  
When there is no Daylight Saving Time in your area, al-  
ways select OFF position in step 3.  
Press PLAY ( ) on the playback VCR.  
JVC TV Remote Control  
CH /+ and TV VOL /+) of a remote controllable JVC TV without setting.  
5
Start recording  
This Remote can control some functions (TV POWER, INPUT, TV  
Press REC on the recording VCR.  
NOTE:  
Its not possible to operate a unit not equipped with a remote sensor.  
This Remote can control a JVC TV only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Requesting Service  
Make sure by first checking the following points.  
SYMPTOM  
POWER  
CAUSE  
POSSIBLE SOLUTION  
Connect the AC power cord to the AC  
outlet.  
The AC power cord is not connected.  
Cassette is not inserted.  
No power.  
Although the power is on, it  
does not operate.  
Insert a video cassette.  
TV BROADCAST RECEPTION  
Antenna connection is not correct.  
Antenna cable is disconnected.  
The video channel is not in the correct  
position.  
Connect it correctly.  
Reconnect the antenna cable.  
Set it to CH 3 or 4.  
A TV program that is selected by  
the VCR does not appear on the  
screen.  
The TV is not set to the video channel  
3 or 4.  
Set the TV channel selector to the 3 or 4  
position.  
The TV/VCR selector is set at TV mode  
(The VCR indicator is not lit).  
Press the TV/VCR selector button (The VCR  
indicator will light).  
INPUT is set to the LINE mode.  
The TV/CATV menu option setting.  
Press the Number key or CH /+ button to  
select your desired TV program.  
RECORDING  
Place a piece of vinyl tape over the gap.  
The erase prevention tab of the video  
cassette is broken off.  
TV recording does not work.  
Press the Number key or CH /+ button to  
select your desired TV program.  
INPUT is set to the LINE mode.  
The time is not set correctly.  
The recording start/end time is not set  
correctly.  
Reset the present time.  
Set the start/end time.  
Timer recording does not work.  
The TIMER button has not been  
pressed (The TIMER REC symbol is  
not lit on the display).  
Press the TIMER button (The TIMER REC  
symbol is lit on the display).  
PLAYBACK  
No picture on screen when  
playing back a recorded tape.  
The TV is not set to the video channel 3  
or 4.  
Set to the video channel 3 or 4 or  
adjust the fine tuning button on your  
TV set.  
Tracking adjustment beyond range of  
automatic tracking circuit.  
Video heads are dirty.  
Adjust tracking manually using the SET or  
+ buttons on the remote control.  
Noise bars on screen.  
Have the video heads cleaned.  
Try another tape.  
The tape is worn or damaged.  
REMOTE CONTROL  
It is not aimed at the remote sensor.  
Aim it at the remote sensor.  
Distance too far or too much light in  
the room.  
Operate within 15 feet (5 meters)  
reduce the light in the room.  
There is an obstacle in the path of the  
beam.  
Clear the path of the beam.  
Remote control does not work.  
The batteries are weak.  
The +, polarity of the batteries are  
not inserted correctly.  
Replace the batteries.  
Insert correctly.  
TV programs cannot be seen  
using the TV selector.  
The TV/VCR function is in the VCR  
mode.  
Set to TV, or turn off the VCR power  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
GENERAL  
:
AC 120 V, 60 Hz  
Power requirement  
Power consumption  
Power on  
:
:
9 W  
1.7 W  
Power off  
Temperature  
Operating  
:
:
:
:
:
:
5°C to 40°C (41°F to 104°F)  
20°C to 60°C (4°F to140°F)  
Horizontal only  
360 mm x 95 mm x 222.5 mm (14-3/16" x 3-3/4" x 8-3/4")  
3.2 kg (7.1 lbs)  
VHS NTSC standard  
Storage  
Operating position  
Dimensions (W x H x D)  
Weight  
Format  
Maximum recording time  
SP  
:
:
210 min. with ST-210 video cassette  
630 min. with ST-210 video cassette  
EP  
VIDEO/AUDIO  
:
NTSC-type color signal and EIA monochrome signal, 525 lines/60 fields  
Signal system  
Recording/Playback  
system  
:
:
:
DA-4 (Double Azimuth) head helical scan system  
42 dB  
230 lines  
Signal-to-noise ratio  
Horizontal resolution  
Frequency range  
Normal audio  
Hi-Fi audio  
:
:
:
100 Hz to 10,000 Hz  
20 Hz to 20,000 Hz  
RCA connectors (IN x 1, OUT x 1)  
Input/Output  
TUNER  
:
Frequency-synthesized tuner  
Tuning system  
Channel coverage  
VHF  
:
:
:
:
Channels 213  
Channels 1469  
UHF  
113 Channels  
CATV  
RF output  
Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75 ohms,  
unbalanced  
TIMER  
:
:
:
Quartz  
Clock reference  
1-month programmable timer/8 programs  
Approx. 5 sec.  
Program capacity  
Memory backup for timer  
ACCESSORIES  
:
RF cable (F-type), Infrared remote control unit, AAAbattery x 2  
Provided accessories  
Specifications shown are for SP mode unless specified otherwise.  
E. & O.E. Design and specifications subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
VCR EXCHANGE -90  
JVC COMPANY OF AMERICA warrants this Video Cassette Recorder and all parts thereof, except as set forth below ONLY TO THE  
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of the original  
retail purchase for the period shown below. ("The Warranty Period")  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN THE  
COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective within the warranty period, JVC will, at its option, either repair or replace the defective  
part(s) or replace the product with a new or refurbished functionally equivalent product. Within 90 days from date of retail sale,  
repair or replacement will be at no charge.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Please do not return your product to the retailer. Instead, please box the product carefully, preferably in the original carton,  
and ship, insured to the JVC repair/replacement facility nearest you.  
A COPY OF YOUR BILL OF SALE, A COMPLETED WARRANTY REPAIR/REPLACEMENT FORM AND ALL OF THE ORIGINAL  
ACCESSORIES WHICH CAME WITH YOUR UNIT MUST ACCOMPANY THE PRODUCT TO BE ELIGIBLE FOR REPAIR/  
REPLACEMENT UNDER WARRANTY.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department at (800) 252-5722.  
WHAT IS EXCLUDED:  
The warranty does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation,  
lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such  
service, or if affixed to any attachment not provided with the products, or if the model or serial number has been altered,  
tampered with, defaced or removed.  
2. Initial installation, installation and removal, from "built in" entertainment centers, and other mounting systems.  
3. Operational adjustments covered in the Owner's Manual, normal maintenance, including head cleaning.  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage.  
5. Signal reception problems and failures due to line power surge.  
6. Products used for commercial purposes (including but not limited to rental).  
7. Accessories.  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase).  
There are no express warranties except as listed above.  
AFTER THE WARRANTY:  
Please contact JVC's Customer Relations Department at (800) 252-5722 to obtain the cost of out of warranty repair or replacement.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED  
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE, OR ANY OTHER DAMAGES,  
WHETHER DIRECT, INCIDENTAL OR CONSEQUENTAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR  
DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS  
AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR  
PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty  
lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have  
other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
1700 Valley Road  
Wayne, New Jersey 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY DOES NOT APPLY. FOR DETAIL OF  
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION  
PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet.  
Retain this information for future reference.  
Model No.: _____________________________ Serial No.: _________________________________  
Purchase Date: __________________________ Name Of Dealer: ___________________________  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR SERVICING (Only in U.S.A.)  
WARRANTY REPAIR / REPLACEMENT FORM  
PLEASE COMPLETE THE FOLLOWING:  
PLEASE NOTE: P.O. BOXES ARE NOT ACCEPTABLE  
NAME: __________________________________________________________________  
STREET ADDRESS: ________________________________________________________  
CITY: ________________________ STATE ___________________ ZIPCODE __________________  
DAY TIME PHONE NUMBER: ________________________________________  
_________________________________________________________________________________________________________________  
REASON FOR RETURN  
________________________________________________________  
________________________________________________________  
________________________________________________________  
Please do not return your product to the retailer. Instead, please box the product carefully, preferably in the original carton,  
and ship, insured to the JVC repair/replacement facility nearest you.  
A COPY OF YOUR BILL OF SALE, A COMPLETED WARRANTY REPAIR/REPLACEMENT FORM AND ALL OF THE ORIGINAL  
ACCESSORIES WHICH CAME WITH YOUR UNIT MUST ACCOMPANY THE PRODUCT TO BE ELIGIBLE FOR REPAIR/REPLACEMENT  
UNDER WARRANTY.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department at (800) 252-5722.  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1-800-537-5722  
Dear Customer,  
In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In  
the event that repair is necessary, or for the address nearest your location within the Continental United States, please call 1-  
for Warranty Service.  
JVC  
JVC SERVICE & ENGINEERING  
COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and  
production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is  
world famous. The JVC service and engineering organization stands behind our products.  
NATIONAL HEADQUARTERS  
JVC SERVICE & ENGINEERING COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
10 New Maple Avenue  
Pine Brook, NJ 07058-9641  
Dont service the product yourself.  
ACCESSORIES  
To purchase accessories for your JVC product, you may  
CAUTION  
contact your local JVC Dealer.  
From the 48 Continental United States call toll free:  
To prevent electrical shock, do not open the cabinet. There  
are no user serviceable parts inside.  
Please refer to qualified service personnel for repairs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia TV DVD Combo NS LTDVD32 09 User Manual
Invacare Camping Equipment CG8000 User Manual
JAI Security Camera CV M91 User Manual
Juniper Networks Switch EX2500 User Manual
JVC Projector LXD700U User Manual
JVC Stereo Receiver RX 884PBK User Manual
Kenwood Marine Radio TK 7360 User Manual
Kenwood TV Receiver KTC D500E User Manual
KitchenAid Ventilation Hood W10268948C User Manual
Klipsch Speaker R 1650 CSM User Manual