JVC Stereo System UX L30UJ User Manual

MICRO COMPONENT SYSTEM

UX-L40— Consists of CA-UXL40 and SP-UXL40

CA-UXL40 SP-UXL40

UX-L30— Consists of CA-UXL30 and SP-UXL30

CA-UXL30 SP-UXL30

STANDBY / ON

COMPACT

DIGITAL AUDIO

REC

SURROND

AHB PRO

CLOCK/TIMER

AUX/MD

MICRO COMPONENT SYSTEM UX-L40

VOLUME

–

TAPE

STANDBY/ON

FM/AM

DOWN

DISPLAY

BASS

TREBLE

CLOCK

/TIMER

PUSH

OPEN

SLEEP

BASS

SET

TREBLE

CANCEL

DOWN

TAPE

FM/AM

AUX/MD

AUTO

REV.MODE FM MODE PRESET

PRGM

RANDOM REPEAT

SURROUND AHB PRO

DIMMER

VOLUME

RM-SUXL40U REMOTE CONTROL

PHONES

SP-UXL40

CA-UXL40

SP-UXL40

STANDBY / ON

COMPACT

DIGITAL AUDIO

REC

REV.

MODE

AHB PRO

CLOCK/TIMER

AUX/MD

MICRO COMPONENT SYSTEM UX-L30

VOLUME

–

STANDBY/ON

TAPE

FM/AM

DOWN

DISPLA

BASS

TREBLE

CLOCK

/TIMER

PUSH

OPEN

BASS

+10

SLEEP

TREBLE

SET

CANCEL

DOWN

3/8

TAPE

FM/AM

AUX/MD

AUTO

REV.MODE FM MODE PRESET

0CD

PRGM

RANDOM REPEAT

AHB PRO

DIMMER

VOLUME

RM-SUXL30U REMOTE CONTROL

PHONES

SP-UXL30

CA-UXL30

SP-UXL30

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No.

which are located either on the rear, bot-

tom or side of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

GVT0080-003A

[US, UJ]

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT FOR LASER PRODUCTS/

REPRODUCTION OF LABELS/

CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE

WARNING LABEL, PLACED INSIDE THE UNIT

ADVARSEL: Usynlig laser-

stråling ved åbning, når

sikkerhedsafbrydere er ude

af funktion. Undgå udsæt-

VARO: Avattaessa ja suo-

CAUTION: Invisible laser

VARNING: Osynlig laser-

strålning när denna del är

öppnad och spärren är

jalukitus ohitettaessa olet

radiation when open and

interlock failed or defeated.

AVOID DIRECT EXPOSURE

alttiina

lasersäteilylle. Älä katso

säteeseen. (f)

näkymättömälle

urkopplad.

Betrakta

(s)

telse for stråling

(d)

TO BEAM.

(e)

strålen.

1. CLASS 1 LASER PRODUCT

2. CAUTION: Invisible laser radiation when open and interlock failed

or defeated. Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There are no user

serviceable parts inside the Unit; leave all servicing to qualified

service personnel.

CAUTION: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

Front:

No obstructions and open spacing.

Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the dimensions below.

Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10

cm or more.

Front view

Side view

15 cm

1 cm

15 cm

UX-L40

UX-L30

10 cm

UX-L40/UX-L30

– G-2 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

We would like to thank you for purchasing one of our JVC products.

Before operating this unit, read this manual carefully and thoroughly to

obtain the best possible performance from your unit, and retain this manual

for future reference.

Power sources

• When unplugging from the wall outlet, always pull the

plug, not the AC power cord.

About This Manual

This manual is organized as follows:

• The manual mainly explains operations using the

buttons on the remote control.

DO NOT handle the AC power cord with wet

hands.

You can use the buttons both on the remote control and

on the unit for the same operations if they have the

same or similar names (or marks), unless mentioned

otherwise.

• Basic and common information that is the same for many

functions is grouped in one place, and is not repeated in

each procedure. For instance, we do not repeat the

information about turning on/off the unit, setting the

volume, changing the sound effects, and others, which are

explained in the section “Common Operations” on pages 9

and 11.

Moisture condensation

Moisture may condense on the lens inside the unit in the

following cases:

• After starting heating in the room

• In a damp room

• If the unit is brought directly from a cold to a warm place

Should this occur, the unit may malfunction. In this case,

leave the unit turned on for a few hours until the moisture

evaporates, unplug the AC power cord, and then plug it in

again.

• The following marks are used in this manual:

Gives you warnings and cautions to prevent

from damage or risk of fire/electric shock.

Also gives you information which is not good

for obtaining the best possible performance

from the unit.

Others

• Should any metallic object or liquid fall into the unit,

unplug the unit and consult your dealer before operating

any further.

• If you are not going to operate the unit for an extended

period of time, unplug the AC power cord from the wall

outlet.

Gives you information and hints you had better

know.

DO NOT disassemble the unit since there are no

user serviceable parts inside.

The illustrations used in this manual are of UX-L40

unless mentioned otherwise.

If anything goes wrong, unplug the AC power cord and

consult your dealer.

Precautions

Installation

• Install in a place which is level, dry and neither too hot nor

too cold—between 5˚C and 35˚C.

• Install the unit in a location with adequate ventilation to

prevent internal heat built-up in the unit.

• Leave sufficient distance between the unit and the TV.

• Keep the speakers away from the TV to avoid interference

with TV.

DO NOT install the unit in a location near heat

sources, or in a place subject to direct sunlight,

excessive dust or vibration.

– 1 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Location of the Buttons and Controls ....................... 3 Playing Back CDs (CD/CD-R/CD-RW).................. 14

Remote Control .......................................................... 3

Front Panel ................................................................. 4

Playing Back the Entire CD—Normal Play ............. 14

Basic CD Operations ................................................ 14

Programming the Playing Order of the Tracks

—Program Play .................................................. 15

Playing at Random—Random Play ......................... 16

Repeating Tracks—Repeat Play............................... 16

Prohibiting Disc Ejection—Tray Lock .................... 16

Getting Started............................................................ 6

Supplied Accessories.................................................. 6

Putting the Batteries into the Remote Control ........... 6

Connecting Antennas ................................................. 6

Connecting Speakers .................................................. 7

Connecting Other Equipment..................................... 8

Adjusting the Voltage Selector ................................... 8

Playing Back Tapes ................................................... 17

Playing Back a Tape ................................................. 17

Common Operations .................................................. 9 Recording .................................................................. 18

Setting the Clock ........................................................ 9

Setting the AM Tuner Interval Spacing ...................... 9

Turning On the Power .............................................. 10

Selecting the Sources and Starting Play ................... 10

Adjusting the Volume ............................................... 10

Adjusting the Tone (Bass/Treble)............................. 11

Reinforcing the Bass Sound ..................................... 11

Reinforcing the Surround Effect

Recording on a Tape ................................................. 18

CD Direct Recording................................................ 19

One Track Recording ............................................... 19

Using the Timers ....................................................... 20

Using Daily Timer and Recording Timer ................. 20

Using Sleep Timer .................................................... 21

(ONLY FOR UX-L40) ....................................... 11

Selecting the Illumination Brightness ...................... 11

Troubleshooting ........................................................ 22

Maintenance .............................................................. 23

Specifications............................................................. 24

Listening to FM and AM Broadcasts ...................... 12

Tuning in to a Station ............................................... 12

Presetting Stations .................................................... 12

Tuning in to a Preset Station .................................... 13

– 2 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Location of the Buttons and Controls

Become familiar with the buttons and controls on your unit.

Remote Control

For UX-L40

For UX-L30

STANDBY/ON

DISPLAY

STANDBY/ON

DISPLAY

CLOCK

/TIMER

CLOCK

/TIMER

+10

BASS

SLEEP

TREBLE

BASS

SET

CANCEL

DOWN

TAPE

3/8

TAPE

FM/AM

AUX/MD

FM/AM

AUX/MD

AUTO

PRESET

REV.MODE FM MODE

0CD

REV.MODE FM MODE

PRGM

RANDOM REPEAT

PRGM RANDOM REPEAT

AHB PRO

SURROUND AHB PRO

DIMMER

VOLUME

;

RM-SUXL40U REMOTE CONTROL

RM-SUXL30U REMOTE CONTROL

See pages in the parentheses for details.

8 STANDBY/ON

button (10, 21)

9 DISPLAY button (9)

p CLOCK/TIMER button (9, 20, 21)

q SLEEP button (21)

w TREBLE button (11)

Remote Control

1 Number buttons

2 BASS button (11)

3 Multi operation buttons

e CANCEL button (15)

r AUTO PRESET button (12)

t FM MODE button (12)

• UP, 4 (reverse skip), 7 (stop), ¢ (forward skip)

and DOWN

y CD play mode buttons (15, 16)

• PRGM (program), RANDOM and REPEAT

u AHB (Active Hyper Bass) PRO button (11)

i VOLUME + / – button (10)

o DIMMER button (11)

4 SET button (13, 15)

5 Source buttons

• CD 3/8, TAPE 2 3, FM/AM and AUX/MD

Pressing one of these buttons also turns on the unit.

6 0 CD (disc tray open/close) button (14)

Pressing this button also turns on the unit.

7 REV.MODE (reverse mode) button (17 – 19)

; SURROUND button (ONLY FOR UX-L40) (11)

– 3 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Continued

Front Panel

STANDBY / ON

COMPACT

DIGITAL AUDIO

CD-R/RW PLAYBACK

For UX-L40

REC

AHB PRO

CLOCK/TIMER

AUX/MD

SURROUND

MICRO COMPONENT SYSTEM

For UX-L30

REV. MODE

VOLUME

–

TAPE

FM/AM

DOWN

BASS

TREBLE

;

PUSH

OPEN

PHONES

– 4 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

[

]

DAILY REC SLEEP REC

SURROUND

BASS

MONO

PRGM

RANDOM

ALL

See pages in the parentheses for details.

Front Panel

1 STANDBY/ON

Display Window

1 Timer indicators

button and STANDBY/ON lamp

(9, 10, 16, 21)

•

(timer), DAILY, REC and SLEEP

2 Disc tray

2 REC (recording) indicator

3 SURROUND indicator (ONLY FOR UX-L40)

4 BASS indicator

3 For UX-L40: SURROUND button (11)

For UX-L30: REV.MODE (reverse mode) button (17 – 19)

4 REC (recording) button (18, 19)

5 Display window

6 VOLUME + / – control (10)

7 CD 3/8 (play/pause) button (10, 14, 16, 19)

Pressing this button also turns on the unit.

8 BASS button (11)

5 Tape operation indicators

• 2 3 (tape direction) and

6 MONO indicator

(reverse mode)

7 Main display

• Shows the source name, frequency, etc.

8 ST (stereo) indicator

9 Cassette holder

p PHONES jack (10)

9 CD play mode indicators

• PRGM (program), RANDOM and

q Remote sensor

ALL (repeat one/repeat all)

w 0 (disc tray open/close) button (14)

Pressing this button also turns on the unit.

e AHB (Active Hyper Bass) PRO button (11)

r CLOCK/TIMER button (9, 20, 21)

t AUX/MD button (10)

Pressing this button also turns on the unit.

y TAPE 2 3 button (10, 17, 18)

Pressing this button also turns on the unit.

u FM/AM button (10, 12, 13)

Pressing this button also turns on the unit.

i TREBLE button (11)

STANDBY ON

COMPACT

DIGITAL AUDIO

CD-R

RW PLAYBACK

o 0 PUSH OPEN (cassette holder open) portion (17 – 19)

; Multi operation buttons

REC

SURROUND

AHB PRO

CLOCK/TIMER

AUX/MD

MICRO COMPONENT SYSTEM

• 4 (reverse skip)/DOWN, 7 (stop)

and ¢ (forward skip)/UP

VOLUME

When using the remote control, point it at

the remote sensor on the front panel.

– 5 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Continued

Supplied Accessories

Connecting Antennas

Make sure that you have all the following items.

The number in the parentheses indicates the quantity of the

pieces supplied.

FM antenna

ANTENNA

• AM loop antenna (1)

• FM antenna (1)

• Remote control (1)

AM EXT

AM LOOP

FM antenna (supplied)

• Batteries (2)

FM 75

COAXIAL

• Speaker cords (2) (ONLY FOR UX-L40)

• AC plug adaptor (1)

If anything is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

1 Attach the FM antenna to the FM 75 Ω

Insert the batteries—R6(SUM-3)/AA(15F)—into the

remote control, by matching the polarity (+ and –) on the

batteries with the + and – markings on the battery

compartment.

COAXIAL terminal.

2 Extend the FM antenna.

When the remote control can no longer operate the unit,

replace both batteries at the same time.

3 Fasten it up in the position which gives you

the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary

measure. If reception is poor, you can connect an outdoor FM

antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

R6(SUM-3)/AA(15F)

Outdoor FM antenna

(not supplied)

Coaxial cable (not supplied)

ANTENNA

AM EXT

AM LOOP

FM 75

COAXIAL

• DO NOT use an old battery together with a new

one.

• DO NOT use different types of batteries together.

• DO NOT expose batteries to heat or flame.

• DO NOT leave the batteries in the battery

compartment when you are not going to use the

remote control for an extended period of time.

Otherwise, it will be damaged from battery

leakage.

A 75 Ω antenna with coaxial type connector

should be used.

– 6 –

Download from Www.Somanuals.com. All Manuals Search And Download.

AM antenna

Connecting Speakers

ANTENNA

Vinyl-covered wire

(not supplied)

For UX-L40

SPEAKERS

RIGHT

LEFT

AM EXT

AM LOOP

Speaker cord

FM75

COAXIAL

SPEAKER

IMPEDANCE

MIN

INPUT

AM loop antenna

(supplied)

For UX-L30

1 Connect the AM loop antenna to the AM

LOOP terminals as illustrated.

• If cords are covered with insulation, twist

the core of the cord at the end of each cord,

then remove the insulation.

Right speaker

Left speaker

2 Turn the AM loop antenna until you have the

best reception.

1 Press and hold the clamp of the speaker

terminal on the rear of the unit.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire

to the AM EXT terminal and extend it horizontally. (The AM

loop antenna must remain connected.)

2 Insert the end of the speaker cord to the

terminal.

Match the polarity between the unit and the speaker

terminals: (+) to (+) and (–) to (–).

• If cords are covered with insulation, twist

the core of the cord at the end of each cord,

then remove the insulation.

For better reception of both FM and AM

• Make sure the antenna conductors do not touch any other

terminals and connecting cords.

• Keep the antennas away from metallic parts of the unit,

connecting cords, and the AC power cord.

3 Release the finger from the clamp.

IMPORTANT: Use only speakers with the same speaker

impedance as indicated by the speaker terminals on the

rear of the unit.

– 7 –

Download from Www.Somanuals.com. All Manuals Search And Download.

To remove the speaker grilles

To connect audio equipment with an optical digital

input terminal

You can record CD sound onto the connected digital

equipment.

The speaker grilles are removable.

Holes

Projections

OPTICAL DIGITAL

Protective plug

OUT

Before connecting the other

equipment, remove the protective plug

from the terminal.

Speaker grille

Audio equipment with

an optical digital input

To optical digital input

To remove the speaker grille, insert your fingers at the top

of the speaker grille, pull towards you. Then pull the bottom

towards you.

Connect an optical digital cord (not supplied) between the

optical digital input terminal on the other equipment and the

OPTICAL DIGITAL OUT terminal.

To attach the speaker grille, put the projections of the

speaker grille into the holes of the speaker.

Connecting Other Equipment

Adjusting the Voltage Selector

You can connect both of the analog and digital equipment.

Before plugging in the unit, set the correct voltage for your

area with the voltage selector on the rear of the unit.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

VOLTAGE

SELECTOR

230V

-240V

220V

To connect audio equipment

127V

Be sure that the plugs of the audio cords are colored: White

plugs and jacks are for left audio signals, and red ones for

right audio signals.

Voltage mark

110V

Use a screwdriver to rotate the voltage selector so the voltage

number the voltage mark is pointing at is the same as the

voltage where you are plugging in the unit. (See the back

cover page.)

AUX

DO NOT plug in before setting the voltage selector

on the rear of the unit and all connection

procedures are complete.

To audio output

Audio equipment

Now, you can plug the AC power cord.

For playing the other equipment through this unit,

connect between the audio output jacks on the other

equipment and AUX jacks by using audio cords (not

supplied).

• If the wall outlet does not match the AC plug, use the

supplied AC plug adaptor.

IMPORTANT: Be sure to check all connections to be done

before plugging the AC power cord into a wall outlet.

– 8 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Operations

To adjust the clock again

Setting the Clock

1 Make sure (timer) indicator is not lit on the display.

• If it is lit, press and hold CLOCK/TIMER until it goes

off.

2 Press CLOCK/TIMER repeatedly until the unit enters

the clock setting mode (the hour digit start flashing on

the display).

Before operating the unit any further, first set the clock built

in this unit. When you plug the AC power cord into the wall

outlet, “0:00” starts flashing on the display.

You can set the clock whether the unit is on or off.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1

again.

First time you press CLOCK/TIMER, the unit enters the

timer setting mode.

• See pages 20 and 21.

3 Repeat steps 2 and 3 of the procedure of “Setting the

Clock.”

CLOCK

/TIMER

1 Press CLOCK/TIMER.

The hour digits start flashing on the display.

4 Press and hold CLOCK/TIMER again so that

(timer) indicator goes off from the display.

CLOCK/TIMER

2 Press UP or DOWN to adjust the

hour, then press CLOCK/TIMER.

The minute digits start flashing on the display.

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and some

countries use 10 kHz spacing.

DOWN

When shipped, the built-in AM tuner is set to 9 kHz spacing.

You can change it to 9 kHz or 10 kHz spacing only while the

unit is on standby.

DOWN

On the unit ONLY:

To select 10 kHz intervals, press

CLOCK

/TIMER

CLOCK/TIMER

DOWN

STANDBY/ON

while

holding ¢.

STANDBY / ON

To select 9 kHz intervals, press

STANDBY/ON

while

holding 4.

3 Press UP or DOWN to adjust the minute,

then press CLOCK/TIMER.

When you change the setting

The preset stations are erased. You will need to preset the stations

again. (See page 12.)

To check the clock time during play

On the remote control ONLY:

DISPLAY

Press DISPLAY.

• Each time you press the button, the source

indication and the clock time alternate on the display.

• When you unplug the AC power cord or if a power failure

occurs

The clock is reset to “0:00” right away. If this happens, set the

clock again.

• The clock may gain or lose 1 to 2 minutes per month

If this happens, set the clock again.

– 9 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Continued

Turning On the Power

Adjusting the Volume

When you press the play button—CD 3/8, TAPE 2 3,

FM/AM and AUX/MD, the unit automatically turns on and

starts playback if the source is ready.

You can adjust the volume level only while the unit is turned

on. The volume level can be adjusted between “VOL MIN”

and “VOLUME 1” – “VOLUME 40 (VOL MAX).”

STANDBY/ON

To turn on the unit, press

When using the remote control, press

VOLUME + to increase the volume or press

VOLUME – to decrease it.

STANDBY / ON

STANDBY/ON

The STANDBY/ON lamp lights

green and “HELLO” appears on the

display.

VOLUME

When using the unit, turn VOLUME + / –

clockwise (+) to increase the volume or

VOLUME

To turn off the unit (on standby),

STANDBY/ON

counterclockwise (–) to decrease it.

STANDBY / ON

press

STANDBY/ON

again.

The STANDBY/ON lamp lights red

and “GOOD BYE” appears on the

display.

–

For private listening

• “0:00” flashes on the display until you set the built-in

clock. After setting the clock, the clock time will appear on

the display while the unit is on standby.

• A little power is always consumed even while the unit is on

standby.

Connect the headphones to the PHONES jack. No sound comes out

of the speakers. Be sure to turn down the volume before connecting

or putting on headphones.

DO NOT turn off (on standby) the unit with the

volume set to an extremely high level; otherwise, a

sudden blast of sound can damage your hearing,

speakers and/or headphones when you turn on the

unit or start playing any source next time.

REMEMBER you cannot adjust the volume level

while the unit is on standby.

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

When you unplug the AC power cord or if a power

failure occurs

The clock is reset to “0:00” right away, while the tuner preset

stations (see page 12) will be erased in a few days.

Selecting the Sources and Starting Play

To play back CDs, press CD 3/8. (See pages 14 – 16.)

To play back tapes, press TAPE 2 3. (See page 17.)

To listen to FM/AM broadcasts, press FM/AM. (See pages

12 – 13.)

To select the external equipment as the source, press

AUX/MD.

FM/AM

AUX/MD

TAPE

When you press the play button for a particular source

(CD 3/8, TAPE 2 3, FM/AM and AUX/MD), the unit turns

on (and the unit starts playing the source if it is ready).

– 10 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the Tone (Bass/Treble)

Reinforcing the Surround Effect

(ONLY FOR UX-L40)

You can adjust the bass level (low frequency range) and the

treble level (high frequency range) within the range of –5 to

+5. Normally set these to 0 (initial setting at factory).

• This function only affects the playback sound, but does not

affect your recording.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1

again.

You can reinforce the surround effect.

• This function does not affect

—your recording.

—playback sound of the monaural sources.

SURROUND

To get the effect, press SURROUND so that the

SURROUND indicator lights up on the display.

SURROUND

1 Press BASS to adjust the bass level or press

SURROUND

TREBLE to adjust the treble level.

TREBLE

BASS

TREBLE

To cancel the effect, press SURROUND again so

that the SURROUND indicator goes off.

2 Press UP to increase the level or press DOWN

to decrease it.

Selecting the Illumination Brightness

DOWN

You can change the illumination brightness only while the

unit is turned on.

DOWN

On the remote control ONLY:

DIMMER

To change the brightness, press DIMMER.

• Each time you press the button, the illumination

dims and brightens alternately.

Reinforcing the Bass Sound

You can reinforce the bass sound to maintain rich, full bass at

low volume.

• This function only affects the playback sound, but does not

affect your recording.

AHB PRO

To get the effect, press AHB (Active Hyper Bass)

PRO until “AHB 1” or “AHB 2” appears on the

display. The BASS indicator also lights up on the

display.

AHB PRO

• Each time you press the button, the bass sound

change as follows:

AHB 1

AHB OFF

(Canceled)

AHB 2

BASS

“AHB 2” has much more bass reinforcement effect than

“AHB 1.”

To cancel the effect, press AHB PRO until “AHB OFF”

appears on the display and the BASS indicator goes off.

– 11 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Listening to FM and AM Broadcasts

Continued

Tuning in to a Station

Presetting Stations

You can preset 30 FM and 15 AM stations—using either

automatic presetting or manual presetting.

FM/AM

1 Press FM/AM to select the band.

The unit automatically turns on and tunes in to

the previously received station (either FM or

AM).

In some cases, test frequencies have been already memorized

for the tuner since the factory examined the tuner preset

function before shipment. This is not a malfunction.

You can preset the stations you want into memory by

following the presetting method.

• Each time you press the button, the band

alternates between FM and AM.

FM/AM

To preset stations automatically—Automatic Presetting

You need to preset stations separately for the FM and AM

bands.

2 Press and hold ¢ or 4

for more than 1 second.

On the remote control ONLY:

The unit starts searching for stations

FM/AM

1 Press FM/AM to select the band you

and stops when a station of

sufficient signal strength is

tuned in.

DOWN

want to preset.

If a program is broadcast in

stereo, the ST (stereo) indicator lights up.

AUTO

PRESET

2 Press and hold AUTO PRESET for

To stop searching, press ¢ or 4.

more than 2 seconds.

Local stations with strong signals are searched

and stored in memory automatically.

When automatic presetting is over, the station

stored in preset number 1 is received.

When you press ¢ or 4 briefly and repeatedly

The frequency changes step by step.

3 Repeat steps 1 and 2 to store stations for the

To change the FM reception mode

On the remote control ONLY:

other band.

FM MODE

When an FM stereo broadcast is hard to receive or

noisy, press FM MODE so that the MONO

indicator lights up on the display. Reception

improves.

• When you cannot automatically store stations you want

Stations with weak signals cannot be detected with this automatic

presetting. To store such a station, use the manual presetting.

• When you unplug the AC power cord or if a power failure

occurs

MONO

Preset stations with the automatic presetting are erased at once. If

this happens, preset the stations again.

To restore the stereo effect, press FM MODE again so that

the MONO indicator goes off. In this stereo mode, you can

hear stereo sounds when a program is broadcasted.

– 12 –

Download from Www.Somanuals.com. All Manuals Search And Download.

To preset stations manually—Manual Presetting

You need to preset stations separately for the FM and AM

bands.

Tuning in to a Preset Station

On the remote control ONLY:

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 2

again.

1 Press FM/AM to select the band.

The unit automatically turns on and tunes in to

the previously received station (either FM or

AM).

FM/AM

On the remote control ONLY:

• Each time you press the button, the band alternates

between FM and AM.

1 Tune in to the station you want to preset.

• See “Tuning in to a Station” on page 12.

2 Press UP or DOWN to select a

SET

2 Press SET.

preset number.

DOWN

To tune a preset number directly using the number

buttons

On the remote control ONLY:

3 Press UP or DOWN to select a

Pressing the number button(s) allows

you to select a preset number you want.

Ex.: For preset number 5, press 5.

For preset number 15, press +10,

then 5.

preset number.

DOWN

For preset number 20, press +10,

then 10.

For preset number 30, press +10,

+10, then 10.

SET

4 Press SET again.

The tuned station in step 1 is stored in the preset number

selected in step 3.

• Storing a new station on a used number erases the

previously stored one.

When you unplug the AC power cord or if a power

failure occurs

The tuner preset stations will be erased in a few days. If this

happens, preset the stations again.

– 13 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Back CDs (CD/CD-R/CD-RW)

Continued

This unit has been designed to playback the following CDs:

• CD

• CD-R

• CD-RW

3 Press CD 3/8.

The disc tray automatically closes and the first

track of the CD starts playing.

Continued use of irregular shape CDs

(heart-shape, octagonal, etc.) can damage the unit.

Track number

Elapsed playing time

General Notes

In general, you will have the best performance by keeping

your CDs and the mechanism clean.

• Store CDs in their cases, and keep them in cabinets or on

shelves.

• The CD automatically stops when the last track of the

CD has finished playing.

To stop playing, press 7.

• Keep the unit’s disc tray closed when not in use.

BASS

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs

(CD-ReWritable) can be played back only if they are already

“finalized.”

Total track number

Total playing time

• You can play back your original CD-Rs or CD-RWs

recorded in music CD format. However, they may not be

played back depending on their characteristics or recording

conditions.

To remove the disc, press 0 CD on the remote control (or 0

on the unit).

• Before playing back CD-Rs or CD-RWs, read their

instructions or cautions carefully.

• Some CD-Rs or CD-RWs may not be played back on this

unit because of their disc characteristics, damage or stain

on them, or if the player’s lens is dirty.

• If the CD cannot be read correctly (because it is scratched, for

example) or an unreadable CD-R or CD-RW is inserted

Playback will not start.

• CD-RWs may require a longer readout time. This is caused

by the fact that the reflectance of CD-RWs is lower than for

regular CDs.

• If no CD is inserted

“NO DISC” appears on the display.

• If the loaded CD has more than 21 tracks and you select 21st

track or above

“– –:– –” appears on the display instead of the playing time.

Playing Back the Entire CD—Normal Play

DO NOT try to open or close the CD tray by hand

as it will be damaged.

1 Press 0 CD on the remote control

(or 0 on the unit).

The unit automatically turns on and the disc

tray comes out.

Basic CD Operations

While playing a CD, you can do the following operations.

2 Place a disc correctly on the circle of

the disc tray, with its label side up.

To stop playing for a moment

Press CD 3/8.

While pausing, the elapsed playing time

flashes on the display.

To resume playing, press CD 3/8 again.

CORRECT

INCORRECT

To go to another track

Press ¢ or 4 repeatedly.

• ¢ :

• When using a CD single (8 cm), place it on the inner

circle of the disc tray.

Skips to the beginning of the

next or succeeding tracks.

DOWN

• 4 :

Goes back to the beginning of

the current or previous tracks.

– 14 –

Download from Www.Somanuals.com. All Manuals Search And Download.

To go to another track directly using the number

buttons

On the remote control ONLY:

4 Repeat step 3 to program other tracks you

want.

5 Press CD 3/8.

Pressing the number button(s) allows

you to start playing the track number

you want.

The tracks are played in the order you have

programed.

Ex.: For track number 5, press 5.

For track number 15, press

+10, then 5.

To stop playing, press 7.

For track number 20, press

+10, then 10.

For track number 32, press +10, +10, +10, then 2.

To exit from Program Play mode, press PRGM before or

after playing. The PRGM (program) indicator goes off.

To erase the program, press 7 twice.

• Disc ejection also erases the program.

To locate a particular point in a track

During play, press and hold ¢ or

If you try to program the 21st track

“FULL” will appear on the display.

• ¢ : Fast-forwards the tracks.

DOWN

• 4 : Fast-reverses the tracks.

To check the program contents

You can check the program contents

by pressing ¢ or 4 before or

after playback.

• ¢ :

To check the contents in the

programmed order.

• 4 :

Programming the Playing Order of the Tracks

—Program Play

DOWN

You can arrange the order in which tracks play before you

start playing. You can program up to 20 tracks.

On the remote control ONLY:

To check the contents in the reverse order.

1 Load a CD.

To modify the program

On the remote control ONLY:

• If the current playing source is not the CD player, press

CD 3/8, then 7 before going to the next step.

CANCEL

Before or after playing, you can erase the last

programed track by pressing CANCEL.

• Each time you press the button, the last

programed track is erased from the program.

PRGM

2 Press PRGM (program).

The PRGM (program) indicator lights up on the

display.

To add tracks in the program before playing, simply select

the track numbers you want to add by following step 3 of the

programming procedure.

PRGM

• If a program has been stored in memory, the program is

called up.

3 Press UP or DOWN to select the

track number, then press SET.

DOWN

• You can select the track number directly

using the number buttons. (See “To go to

another track directly using the number

buttons.”)

SET

PRGM

Track number

Program step number

– 15 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing at Random—Random Play

Repeating Tracks—Repeat Play

The tracks will play in no particular order when you use this

mode.

You can have all the tracks, the program or individual track

currently playing to repeat as many times as you like.

On the remote control ONLY:

REPEAT

To repeat playing, press REPEAT before or

during playing.

• Each time you press the button, Repeat Play

mode changes as follows, and the following

indicator lights up on the display:

1 Load a CD.

• If the current playing source is not the CD player, press

CD 3/8, then 7 before going to the next step.

RANDOM

2 Press RANDOM.

The RANDOM indicator lights up on the

ALL

display and the tracks start playing at random.

Canceled

Repeats one track.

3 Press CD 3/8.

ALL : In Normal Play mode, repeat all the tracks.

In Program Play mode, repeat all the tracks in

the program.

RANDOM

In Random Play mode, repeats all the tracks in

random order.

Random Play ends when all the tracks are played once.

To stop playing, press 7.

To skip the current track, press ¢.

• You cannot go back to the previous track by pressing 4.

To cancel Repeat Play mode, press REPEAT repeatedly

until the repeat indicator goes off.

• Repeat Play mode remains in effect even when you change

the play mode.

To stop playing, press 7.

To exit from Random Play mode, press RANDOM again

before or after playing. Random Play mode is canceled and

Normal Play resumes.

• In Random Play

cannot be selected. If

has been

selected when you press RANDOM, it is canceled.

• The RANDOM indicator goes off.

Prohibiting Disc Ejection—Tray Lock

You can lock the disc tray and prohibit to eject the CD.

• If the current playing source is not the CD player, press

CD 3/8, then 7 before performing the procedure below.

On the unit ONLY:

To prohibit disc ejection, press

STANDBY/ON

while holding 7.

• If the disc tray is opened, close it first.

STANDBY / ON

To cancel the prohibition and unlock the CD, press

STANDBY/ON

while holding 7.

If you try to eject the CD while Tray Lock is in use

“LOCKED” appears to inform you that the disc tray is locked.

– 16 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Back Tapes

You can play back type I, type II, and type IV tapes without

changing any settings.

To stop playing, press 7.

To fast-wind to the left or to the right, press ¢ or 4

while the tape is not running.

The tape direction indicator (3 or 2) starts flashing quickly

on the display.

Playing Back a Tape

To remove the cassette, press 0 PUSH OPEN on the unit.

1 Press 0 PUSH OPEN on the unit.

To play both sides—Reverse Mode

You can set the deck to play just one side of a tape, both sides

once, or both sides continuously.

PUSH

OPEN

REV.MODE

Press REV.MODE.

• Each time you press the button,

reverse mode changes as follows:

REV. MODE

The deck automatically

stops after playing both

sides of the tape. Stops

when playback in the 2

direction is finished.

On the unit

(only for UX-L30)

2 Put a cassette in with the exposed part of the

tape down.

The deck continues to play both sides of the

tape until 7 is pressed.

The deck automatically stops after playing one

side of the tape.

The use of the C-120 or thinner tape is not

recommended, since characteristic deterioration

may occur and this tape easily jams in the pinch-

rollers and the capstans.

3 Press 0 PUSH OPEN again.

TAPE

4 Press TAPE 2 3.

The unit automatically turns on and the tape

starts playing. The tape direction indicator

(3 or 2) flashes slowly on the display.

• Each time you press the button, the tape

TAPE

direction changes.

3 :

2 :

plays the front side.

plays the reverse side.

When the tape plays to the end, the deck automatically

stops if the reverse mode is set to

play both sides—Reverse Mode.”)

. (See “To

If no cassette is inserted

“NO TAPE” appears on the display.

– 17 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Continued

IMPORTANT:

Recording on a Tape

• It may be unlawful to record or play back copyrighted

material without the consent of the copyright owner.

• The recording level is automatically set correctly, so it is

not affected by the other sound settings. Thus, during

recording you can adjust the sound you are actually

listening to without affecting the recording level.

• If recordings you have made have excessive noise or static,

the unit may be too close to a TV. Increase the distance

between the TV and the unit.

On the unit ONLY:

1 Put a recordable cassette in with the exposed

part of the tape down.

• You can use type I tape for recording.

To protect your recording

Cassettes have two small tabs

on the back to protect from

unexpected erasure or re-

recording.

To protect your recording,

remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.

2 Close the cassette holder gently and check the

recording direction for the tape.

• If the tape direction is not correct, press TAPE 2 3

twice then 7 to change the tape direction.

• If you want to record on both sides of a tape, see “To

record on both sides—Reverse Mode.”

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette decks

become dirty, the following will occur:

• Impaired sound quality

• Discontinuous sound

• Fading

3 Start playing the source—FM, AM or

auxiliary equipment connected to AUX jacks.

• When the source is CD, see “CD Direct Recording” on

page 19.

• Incomplete erasure

• Difficulty in recording

REC

4 Press REC (recording).

The REC (recording) indicator lights up on

the display and recording starts.

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

To stop recording, press 7.

The tape stops after 4 seconds.

Capstans

To remove the cassette, press 0 PUSH OPEN on the unit.

To record on both sides—Reverse Mode

Press REV.MODE (reverse mode) until

REV.MODE

Heads

the

indicator is lit.

Pinch Rollers

• When using the Reverse Mode for

recording, start recording in the

forward (3) direction first.

Otherwise, recording will stop when

recording is done only on one side

(reverse) of the tape.

REV. MODE

To demagnetize the heads

Turn off the unit, and use a head demagnetizer (available at

electronics and audio shops).

On the unit

(only for UX-L30)

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when

recording CDs or radio broadcasts, wind the leader tape first to

ensure that the recording will be made without any music part lost.

– 18 –

Download from Www.Somanuals.com. All Manuals Search And Download.

CD Direct Recording

One Track Recording

Everything on the CD goes onto the tape in the order it is on

the CD, or according to the order you have made for Program

Play.

This recording method is convenient when you record tracks

while playing the CD. You can only record your favorite

songs on the tape.

On the unit ONLY:

1 Put a recordable cassette in with the exposed 1 Put a recordable cassette in with the exposed

part of the tape down.

2 Load a CD.

2 Play the track on the CD you wish to record.

• If the current playing source is not the CD player, press

CD 3/8, then 7 before going to the next step.

— If you do not want pauses of about 4 seconds

recorded between selections, press CD 3/8 twice.

Otherwise, non-recorded pause will be

REC

3 Press REC (recording).

The CD player returns to the beginning of

that track and the track is recorded on the

tape.

automatically recorded between selections.

• If you want to record on both sides of a tape, see “To

record on both sides—Reverse Mode.”

After recording, the CD player and cassette deck

automatically stop.

4 Repeat steps 2 and 3 to record other tracks

REC

3 Press REC (recording).

you want.

The REC (recording) indicator lights up on

the display and recording starts.

To stop while recording, press 7.

The tape stops after 4 seconds.

After recording, the CD player and cassette deck

automatically stop.

To remove the cassette, press 0 PUSH OPEN on the unit.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 PUSH OPEN on the unit.

To record on both sides—Reverse Mode

Press REV.MODE (reverse mode) until

REV.MODE

the

indicator is lit.

• When using the Reverse Mode for CD

Direct Recording, start recording in

the forward (3) direction first. When

the tape reaches its end while

REV. MODE

recording a song in the forward

direction (3), the last song will be re-

recorded at the beginning of the

reverse side (2).

On the unit

(only for UX-L30)

If you start recording on the reverse

side (2), recording will stop when recording is done only

on one side (reverse) of the tape.

When making Sleep Timer settings while doing CD

Direct recording

Set enough time to allow for the CD to finish playing; otherwise the

power will go off before recording is completed.

– 19 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Timers

Continued

There are three timers available—Daily Timer, Recording

Timer and Sleep Timer.

Before using the timers, you need to set the clock built in the

unit (see page 9).

2 Set the on-time when you want the unit to

turn on.

1) Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2) Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters off-time setting mode.

Using Daily Timer and Recording Timer

DOWN

You can set the timer whether the unit is on or off.

DOWN

When the on-time comes, the unit automatically turns on

(

(timer) indicator flashes just before the on-time, and

continues flashing while the timer is operating). Then, when

the off-time comes, the unit automatically turns off (on

standby).

CLOCK

/TIMER

CLOCK/TIMER

The timer setting remains in memory until you change it.

• When the DAILY indicator is lit on the display, the timer

acts as the Daily Timer. Once the Daily Timer has been set,

it will be activated at the same time everyday until the timer

is turned off.

[

]

DAILY

• When the REC indicator is lit on the display, the timer acts

as the Recording Timer. After the Recording Timer has

been performed, the details of the setting remain stored but

the timer is turned off.

3 Set the off-time when you want the unit to

turn off (on standby).

1) Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

Before you start...

When using “ TUNER” as the source to play, make sure to

select the desired station before turning off the power.

2) Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters source selecting mode.

DOWN

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1

again.

DOWN

CLOCK

1 Press CLOCK/TIMER.

/TIMER

CLOCK

/TIMER

CLOCK/TIMER

(timer) indicator lights up, and the timer

mode indicator (DAILY or REC) and the

current on-time flash on the display.

CLOCK/TIMER

The unit enters on-time setting mode.

4 Press UP or DOWN to select the timer mode

(Daily Timer or Recording Timer) and the

source to play, then press CLOCK/TIMER.

[

]

DAILY

DOWN

CLOCK

/TIMER

CLOCK/TIMER

– 20 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Sleep Timer

• Each time you press these buttons, the timer mode and

the source change as follows:

With Sleep Timer, you can fall asleep to music.

You can set Sleep Timer when the unit is turned on.

DAILY

REC

TUNER

DAILY

TAPE

How Sleep Timer actually works

The unit automatically turns off after the specified time

length passes.

^DAILYTUNER : tunes in to the last station you were

listening to. (Daily Timer)

^RECTUNER : records the last station you were listening

to. (Recording Timer)

On the remote control ONLY:

• Put a recordable cassette into the deck.

^DAILYCD : plays a CD. (Daily Timer)

• Load a CD.

^DAILYTAPE : plays a tape. (Daily Timer)

• Make sure that the tape direction is correct.

SLEEP

1 Press SLEEP.

The time length until the shut-off time appears

and the SLEEP indicator lights up on the

display.

• Each time you press the button, the time length changes

as follows:

5 Press UP or DOWN to set the volume level,

then press CLOCK/TIMER.

SLEEP 10

SLEEP 20

SLEEP 30

SLEEP 60

SLEEP 90

• You can select the volume level (“VOLUME – –” and

“VOLUME 0” to “VOLUME 40”).

If you select “VOLUME – –,” the volume is set to the

last level when the unit has been turned off.

Canceled

SLEEP120

• To turn off the volume while the Recording Timer

(

“VOLUME 0.”

2 Wait for about 5 seconds after specifying the

^RECTUNER) is working, set the volume level

time length.

The unit enters the clock setting mode.

DOWN

To check the remaining time until the shut-off time, press

SLEEP once so that the remaining time until the shut-off time

appears for about 5 seconds.

DOWN

To change the shut-off time, press SLEEP repeatedly until

the desired time length appears on the display.

CLOCK

/TIMER

CLOCK/TIMER

To cancel the setting, press SLEEP repeatedly until the

SLEEP indicator goes off.

• Sleep Timer is also canceled when you turn off the unit.

6 Adjust the clock.

• See “Setting the Clock” on page 9.

STANDBY/ON

7 Press STANDBY/ON

• If you set the Sleep Timer after Daily Timer starts playing the

selected source

Daily Timer is canceled.

• If you set the Sleep Timer after Recording Timer starts

recording

Recording Timer is canceled, but recording continues until Sleep

Timer shuts off the power.

turn off the unit (on standby) if

you have set the timer with the

unit turned on.

STANDBY / ON

• When the timer turns on the unit,

(timer) indicator and the selected timer

mode indicator (DAILY or REC) start

flashing.

To cancel the setting, press and hold CLOCK/TIMER until

(timer) indicator goes off from the display.

• If the unit is turned on when the timer-on time comes

Timer does not work.

• When you unplug the AC power cord or if a power failure

occurs

The timer will be canceled. You need to set the clock first, then

the timer again.

– 21 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,

such as your dealer, for service.

Symptom

No sound is heard.

Cause

Action

• Connections are incorrect or loose.

• Check all connections and make

corrections. (See pages 6 to 8.)

• Disconnect the headphones.

• Headphones are connected.

• Antennas are disconnected.

Hard to listen to broadcasts because of

noise.

• Reconnect the antennas correctly and

securely.

• The AM loop antenna is too close to the

unit.

• Change the position and direction of the

AM loop antenna.

• The FM antenna is not properly extended

and positioned.

• Extend the FM antenna at the best

position.

The disc tray does not open or close.

The disc does not play.

The AC power cord is not plugged in.

The disc is placed upside down.

The disc is scratched or dirty.

Plug the AC power cord.

Place the disc with the label side up.

Clean or replace the disc. (See page 23.)

Turn on the unit.

The disc sound is discontinuous.

The cassette holder cannot be opened.

Power supply from the AC power cord has

been cut off while the tape was running.

Impossible to record.

Small tabs on the back of the cassette are

removed.

Cover the holes with adhesive tape.

Operations are disabled.

The built-in microprocessor may

malfunction due to external electrical

interference.

Unplug the AC power cord and then plug it

back in.

Unable to operate the unit from the remote

control.

• The path between the remote control and

the remote sensor on the unit is blocked.

• The batteries are exhausted.

• Remove the obstruction.

• Replace the batteries.

– 22 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Handling discs

Cleaning the unit

• Remove the disc from its case by

holding it at the edge while pressing

the center hole lightly.

• Do not touch the shiny surface of the

disc, or bend the disc.

• Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily

stained, wipe it with a cloth soaked in water-diluted neutral

detergent and wrung well, then wipe clean with a dry cloth.

• Since the unit may deteriorate in quality, become

damaged or get its paint peeled off, be careful about the

followings.

• Put the disc back in its case after use

to prevent warping.

— DO NOT wipe it with a hard cloth.

— DO NOT wipe it strong.

— DO NOT wipe it with thinner or benzine.

— DO NOT apply any volatile substance such as

insecticides to it.

• Be careful not to scratch the surface of

the disc when placing it back in its

case.

• Avoid exposure to direct sunlight,

temperature extremes, and moisture.

— DO NOT allow any rubber or plastic to remain in

contact with it for a long time.

To clean the disc

Wipe the disc with a soft cloth in a

straight line from center to edge.

DO NOT use any solvent—such as conventional record

cleaner, spray, thinner, or benzine—to clean the disc.

Handling cassette tapes

• If the tape is loose in its cassette, take

up the slack by inserting a pencil in

one of the reels and rotating.

• If the tape is loose, it may get

stretched, cut, or caught in the

cassette.

• Be careful not to touch the tape

surface.

• Avoid the following places to store the

tape:

— In dusty places

— In direct sunlight or heat

— In moist areas

— On a TV or speaker

— Near a magnet

– 23 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Design and specifications are

subject to change without notice.

Specifications

UX-L40 (CA-UXL40 and SP-UXL40)

UX-L30 (CA-UXL30 and SP-UXL30)

Amplifier

Output Power:

Amplifier

Output Power:

120 W (60 W + 60 W) at 6 Ω (MAX.)

100 W (50 W + 50 W) at 6 Ω (10% THD)

Audio input sensitivity/Impedance (at 1 kHz)

120 W (60 W + 60 W) at 6 Ω (MAX.)

100 W (50 W + 50 W) at 6 Ω (10% THD)

Audio input sensitivity/Impedance (at 1 kHz)

AUX:

400 mV/48 kΩ

AUX:

400 mV/48 kΩ

Digital output—OPTICAL DIGITAL OUT

Signal wave length:660 nm

Digital output—OPTICAL DIGITAL OUT

Signal wave length:660 nm

Output level:

–21 dBm to –15 dBm

Output level:

–21 dBm to –15 dBm

Speakers/Impedance:

6 Ω – 16 Ω

Speakers/Impedance:

6 Ω – 16 Ω

Tuner

FM tuning range:

AM tuning range:

Tuner

FM tuning range:

AM tuning range:

87.50 MHz – 108.00 MHz

At 9 kHz intervals: 531 kHz – 1 710 kHz

At 10 kHz intervals:530 kHz – 1 710 kHz

At 9 kHz intervals: 531 kHz – 1 710 kHz

At 10 kHz intervals:530 kHz – 1 710 kHz

CD player

Dynamic range:

CD player

Dynamic range:

85 dB

Signal-to-noise ratio:

Wow and flutter:

90 dB

Immeasurable

Signal-to-noise ratio:

Wow and flutter:

90 dB

Immeasurable

Cassette deck

Frequency response:

Cassette deck

Frequency response:

Normal (type I): 60 Hz – 14 000 Hz

Wow and flutter: 0.15% (WRMS)

Normal (type I): 60 Hz – 14 000 Hz

Wow and flutter: 0.15% (WRMS)

General

Power requirement:

General

Power requirement:

AC 110 V/ 127 V/ 220 V/ 230 V – 240 V

with the voltage selector, 50 Hz/60 Hz

, adjustable

AC 110 V/ 127 V/ 220 V/ 230 V – 240 V

with the voltage selector, 50 Hz/60 Hz

, adjustable

Power consumption:

90 W (at operation)

7.2 W (on standby)

Power consumption:

90 W (at operation)

7.2 W (on standby)

Dimensions (approx.):

170 mm x 286 mm x 319.5 mm (W/H/D)

Mass (approx.): 12.7 kg

Dimensions (approx.):

170 mm x 286 mm x 319.5 mm (W/H/D)

Mass (approx.): 12.7 kg

Supplied Accessories

See page 6.

Speaker

Speaker units:

Speaker

Speaker units:

Woofer:

Tweeter:

10.0 cm cone x 2

4.0 cm cone x 1

Woofer:

Tweeter:

12.0 cm cone x 1

4.0 cm cone x 1

Impedance:

Dimensions (approx.):

Main speaker:

6 Ω

Impedance:

Dimensions (approx.):

Main speaker:

6 Ω

175 mm x 320 mm x 229 mm (W/H/D)

Mass (approx.): 3.0 kg each

160 mm x 285 mm x 186.5 mm (W/H/D)

Mass (approx.): 2.4 kg each

– 24 –

Download from Www.Somanuals.com. All Manuals Search And Download.

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,

Australia, and U.K.)

IMPORTANT for mains (AC) line

BEFORE PLUGGING IN, do check that your mains

(AC) line voltage corresponds with the position of the

voltage selector switch provided on the outside of this

VOLTAGE

SELECTOR

230V

equipment and, if different, reset the voltage selector

OPTICAL DIGITAL

-240V

swi_Otc_UTh, to prevent from a damage or risk of fire/electric

ANTENNA

220V

shock.

AM EXT

AM LOOP

AUX

127V

FM75

COAXIAL

110V

VOLTAGE

SELECTOR

SPEAKERS

RIGHT

LEFT

230V

-240V

127V

220V

110V

SPEAKER

IMPEDANCE

MIN

VICTOR COMPANY OF JAPAN, LIMITED

EN, CH

0302MWMMDWJEM

Download from Www.Somanuals.com. All Manuals Search And Download.

MICRO COMPONENT SYSTEM

SISTEMAS DE MICROCOMPONENTES

SISTEMA DE MICRO COMPONENTES

UX-L40— Consists of CA-UXL40 and SP-UXL40

UX-L30— Consists of CA-UXL30 and SP-UXL30

STANDBY / ON

COMPACT

DIGITAL AUDIO

REC

SURROND

AHB PRO

CLOCK/TIMER

AUX/MD

MICRO COMPONENT SYSTEM UX-L40

VOLUME

–

TAPE

STANDBY/ON

FM/AM

DOWN

DISPLAY

BASS

TREBLE

CLOCK

/TIMER

PUSH

OPEN

SLEEP

BASS

SET

TREBLE

CANCEL

DOWN

TAPE

FM/AM

AUX/MD

AUTO

REV.MODE FM MODE PRESET

PRGM

RANDOM REPEAT

SURROUND AHB PRO

DIMMER

VOLUME

RM-SUXL40U REMOTE CONTROL

PHONES

SP-UXL40

CA-UXL40

SP-UXL40

STANDBY / ON

COMPACT

DIGITAL AUDIO

REC

REV.

MODE

AHB PRO

CLOCK/TIMER

AUX/MD

MICRO COMPONENT SYSTEM UX-L30

VOLUME

–

STANDBY/ON

TAPE

FM/AM

DOWN

DISPLA

BASS

TREBLE

CLOCK

/TIMER

PUSH

OPEN

BASS

+10

SLEEP

TREBLE

SET

CANCEL

DOWN

3/8

TAPE

FM/AM

AUX/MD

AUTO

REV.MODE FM MODE PRESET

0CD

PRGM

RANDOM REPEAT

AHB PRO

DIMMER

VOLUME

RM-SUXL30U REMOTE CONTROL

PHONES

SP-UXL30

CA-UXL30

SP-UXL30

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No.

which are located either on the rear, bot-

tom or side of the cabinet. Retain this

information for future reference.

MANUAL DE INSTRUCCIONES

INSTRUÇÕES

Model No.

Serial No.

GVT0080-013A

[UW, UY]

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings, Cautions and Others

Avisos, precauciones y otras notas

Advertências, precauções e outras notas

CAUTION—STANDBY/ON

button!

Disconnect the mains plug to shut the power off completely (the

STANDBY/ON lamp goes off). The STANDBY/ON

disconnect the mains line.

button in any position does not

• When the unit is on standby, the STANDBY/ON lamp lights red.

• When the unit is turned on, the STANDBY/ON lamp lights green.

The power can be remote controlled.

Precaución––Interruptor STANDBY/ON

Desconecte el enchufe de la red para desconectar la alimentación por completo (la

lámpara STANDBY/ON se apaga). El interruptor STANDBY/ON STANDBY/ON

desconectará completamente la alimentación principal, cualquiera que sea su posición.

• Cuando la unidad está en espera, la lámpara

STANDBY/ON se enciende en rojo.

• Cuando conecta la unidad, la lámpara STANDBY/ON se enciende en verde.

La alimentacion puede ser controlada a distancia.

Precauçào—botão STANDBY/ON

Desligue a ficha do interruptor para cortar completamente a corrente eléctrica (a

lâmpada de STANDBY/ON - dormir activado-apaga-se). O botão STANDBY/ON

em qualquer posição, não desliga completamente a corrente eléctrica.

• Quando o aparelho está em standby (dormir) a lâmpada

STANDBY/ON (domir activado) fica vermelha.

• Quando o aparelho está ligado a lâmpada STANDBY/ON (dormir activado) fica verde.

O aparelho pode ser ligado através da unidade de controlo remoto.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth,

etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles, on the

apparatus.

• When discarding batteries, environmental problems must be considered

and local rules or laws governing the disposal of these batteries must be

followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and

that no objects filled with liquids, such as vases, shall be placed on the

apparatus.

PRECAUCIÓN

Para reducir riesgos de choques eléctricos, incendio,

etc.:

1. No extraiga los tornillos, los cubiertas ni la caja.

2. No exponga este aparato a la lluvia o a la

humedad.

PRECAUCIÓN

PRECAUÇÃO

• No obstruya las rendijas o los orificios de ventilación.

(Si las rendijas o los orificios de ventilación quedan tapados con un

periódico, un trozo de tela, etc., no se podrá disipar el calor).

• No ponga sobre el aparato ninguna llama al descubierto, como velas

encendidas.

• Cuando tenga que descartar las pilas, tenga en cuenta los problemas

ambientales y observe estrictamente los reglamentos o las leyes locales

sobre disposición de las pilas.

Para reduzir riscos de choques elétricos, incêndio, etc.:

1. Não remova parafusos e tampas ou desmonte a

caixa.

2. Não exponha este aparelho à chuva nem à

umidade.

• No exponga este aparato a la lluvia, humedad, goteos o salpicaduras.

Tampoco ponga recipientes conteniendo líquidos, como floreros, encima

del aparato.

PRECAUÇÃO

• Não obstrua as aberturas e orifícios de ventilação.

(Se os orifícios ou aberturas de ventilação estiverem obstruídos por

qualquer papel ou tecido, não haverá circulação do ar quente.)

• Não coloque nenhum objeto com chamas, como velas acesas, sobre o

aparelho.

• Ao descartar as baterias, leve em consideração os problemas que

possam ser causados ao meio ambiente e os regulamentos e leis locais

e governamentais sobre recolhimento dessas baterias devem ser

rigorosamente seguidos.

• Não exponha este aparelho à chuva, umidade, pingos ou esguichos de

água, nem coloque em cima do mesmo qualquer tipo de recipiente que

contenha líquidos, como por exemplo vasos.

– G-1 –

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER /

IMPOTANTE PARA PRODUTOS LASER

REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS

CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE

1. CLASS 1 LASER PRODUCT

2. CAUTION: Invisible laser radiation when open and interlock failed

ETIQUETA DE CLASIFICACIÓN, PROVISTA SOBRE LA

SUPERFICIE EXTERIOR

or defeated. Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There are no user

serviceable parts inside the Unit; leave all servicing to qualified

service personnel.

ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA PARTE

POSTERIOR DA CAIXA DO APARELHO

1. PRODUCTO LÁSER CLASE 1

2. PRECAUCIÓN: En el interior hay radiación láser invisible. Evite el

contacto directo con el haz.

3. PRECAUCIÓN: No abra la tapa superior. En el interior de la

unidad no existen piezas reparables por el usuario; deje todo

servicio técnico en manos de personal calificado.

WARNING LABEL, PLACED INSIDE THE UNIT

1. PRODUTO LASER CLASSE 1

2. CUIDADO: O laser emite uma rediação invisível que é perigosa,

caso o aparelho esteja aberto e a trava inoperante ou danificada.

Evite exposição direta ao feixe dos raios.

ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTERIOR DE

LA UNIDAD

ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE

INTERNA DA UNIDADE

3. CUIDADO: Não abra a caixa do aparelho. Não existem peças

reparáveis pelo usuário na parte interna da unidade. Solicite

assistência técnica somente a pessoal técnico qualificado.

ADVARSEL: Usynlig laser-

stråling ved åbning, når

sikkerhedsafbrydere er ude

af funktion. Undgå udsæt-

VARO: Avattaessa ja suo-

CAUTION: Invisible laser

radiation when open and

interlock failed or defeated.

AVOID DIRECT EXPOSURE

VARNING: Osynlig laser-

strålning när denna del är

öppnad och spärren är

jalukitus ohitettaessa olet

alttiina

lasersäteilylle. Älä katso

säteeseen. (f)

näkymättömälle

urkopplad.

Betrakta

(s)

telse for stråling

(d)

TO BEAM.

(e)

strålen.

CAUTION: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

Front: No obstructions and open spacing.

Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or

more.

Precaución: el aparato debe estar bien ventilado

Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque el aparato del modo

Parte delantera: No ponga nada delante, deje el espacio libre.

Laterales/ parte superior/ parte trasera: No se debería colocar nada en las áreas y las distancias que se detallan a

continuación.

Parte inferior: Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire; para ello, coloque el aparato

sobre una base a una altura mínima de 10 cm.

Precaução: Ventilação adequada

Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:

Parte frontal: Sem obstruções e espaços abertos.

Partes laterais/ Tampa/ Posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas dimensões são indicadas

abaixo.

Parte inferior: Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a ventilação se este for instalado

numa posição que tenha uma altura de 10 cm ou mais.

Front view

Vista frontal

15 cm

Side view

Vista lateral