JVC Stereo Receiver RX 7020VBK User Manual

AUDIO/VIDEO CONTROL RECEIVER  
RX-7020VBK  
A/V CONTROL RECEIVER  
CATV/DBS  
DVD  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
CD  
TV/DBS  
TAPE/CDR PHONO  
BASS  
TREBLE  
+
+
SURROUND  
ON/OFF  
SURROUND ANALOG/DIGITAL SLEEP  
MODE  
INPUT  
CENTER  
+
BASS BOOST EFFECT  
1
2
3
MENU  
SOUND  
DIMMER  
MUTING  
TEST  
REAR•L  
+
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
4
5
6
+
ENTER  
REAR•R  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
MEMORY  
COMPULINK  
Remote  
7/P  
8
9
STANDBY  
MASTER VOLUME  
SUBWOOFER +  
10  
RETURN  
0
+10  
100  
+
FM MODE  
STANDBY/ON  
CATV/DBS  
CONTROL  
+
+
+
CH  
TV VOL  
VOLUME  
INPUT  
TV/VIDEO  
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
BASS BOOST  
ADJUST SETTING  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
INPUT ATT  
+
CONTROL  
DOWN UP  
SPEAKERS ON/OFF  
/REW  
FF/  
TUNING  
1
2
CD  
PHONO  
TAPE/CDR  
FM/AM  
REC  
SOURCE NAME  
PAUSE  
PHONES  
CONTROL  
RM-SRX7020J REMOTE CONTROL  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial  
No. which are located either on the rear,  
bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LVT0852-001A  
[J]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Parts Identification...................................... 2  
Getting Started........................................... 3  
Before Installation ...................................................................... 3  
Checking the Supplied Accessories ........................................... 3  
Putting Batteries in the Remote Control .................................... 3  
Connecting the FM and AM Antennas ....................................... 4  
Connecting the Speakers ............................................................ 5  
Connecting Audio/Video Components....................................... 6  
Connecting the Power Cord ....................................................... 9  
Basic Operations ....................................... 10  
Turning On the Power .............................................................. 10  
Selecting the Source to Play ..................................................... 10  
Adjusting the Volume ............................................................... 11  
Selecting the Front Speakers .................................................... 11  
Listening Only with Headphones ............................................. 12  
Turning Off the Sounds Temporarily—Muting........................ 12  
Changing the Display Brightness ............................................. 12  
Turning Off the Power with the Sleep Timer ........................... 12  
Basic Settings........................................... 14  
Setting the Digital Input (DIGITAL IN) Terminals ................. 14  
Selecting the Analog or Digital Input Mode ............................ 15  
Selecting the Video Input Terminal .......................................... 16  
Setting the Speaker Information............................................... 16  
Sound Adjustments.................................... 19  
Attenuating the Input Signal .................................................... 19  
Adjusting the Front Speakers Output Balance ......................... 19  
Adjusting the Tone ................................................................... 20  
Adjusting the Subwoofer Output Level.................................... 20  
Reinforcing the Bass ................................................................ 20  
Tuner Operations....................................... 21  
Tuning in Stations Manually .................................................... 21  
Using Preset Tuning ................................................................. 21  
Selecting the FM Reception Mode........................................... 22  
Creating Realistic Sound Fields ................... 23  
About Relations between Speaker Layouts and  
Surround Modes ................................................................. 25  
Using Dolby Pro Logic II, Dolby Digital  
and DTS Digital Surround ................................................. 26  
Using DAP Modes and All Channel Stereo ............................. 28  
Using DVD MULTI Playback Mode................ 30  
Activating DVD MULTI Playback Mode ................................ 30  
COMPU LINK Remote Control System ......... 31  
AV COMPU LINK Remote Control System .... 32  
Operating JVC’s Audio/Video  
Components.......................................... 34  
Operating Audio Components .................................................. 34  
Operating Video Components .................................................. 36  
Operating Other Manufacturers’ Video  
Equipment ............................................ 37  
Troubleshooting......................................... 40  
Specifications............................................ 41  
This mark indicates that the remote control CAN  
ONLY be used for the operation explained.  
This mark indicates that the remote control CANNOT  
be used for the operation explained. Use buttons on  
the front panel.  
Remote  
NOT  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Identification  
Front Panel  
1
2
3
4 5  
7 8 9  
6
p
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
SPK  
1
2
R
BASS BOOST  
TUNED STEREO AUTO MUTING SLEEP  
VOLUME  
ANALOG  
STANDBY  
L
C
DIGITAL AUTO  
LINEAR PCM  
DIGITAL  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
MEMORY  
S.WFR LFE  
MASTER VOLUME  
LS  
S
RS  
CH-  
STANDBY/ON  
INPUT  
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
BASS BOOST  
ADJUST SETTING  
CONTROL  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
INPUT ATT  
DOWN  
UP  
SPEAKERS ON/OFF  
1
2
CD  
TAPE/CDR  
FM/AM  
PHONO  
SOURCE NAME  
PHONES  
q
e
i
o
w
y
u
r
t
See pages in the parentheses for details.  
Remote Control  
Front Panel  
Remote Control  
1
STANDBY/ON  
lamp (10)  
FM/AM TUNING 5/buttons (21)  
FM/AM PRESET 5/buttons (21, 22)  
FM MODE button (22)  
button and STANDBY  
1
Display window  
A/V CONTROL RECEIVER  
a: Remote control operation mode indicator  
b: Signal transmission indicator  
Lights up when transmitting the remote control  
signal.  
Power buttons (10, 36 39)  
CATV/DBS  
AUDIO  
Source selecting buttons  
(10, 11, 15, 21, 22, 30, 34 39) *  
DVD, DVD MULTI, CD, FM/AM, TV/DBS, VCR,  
TAPE/CDR, PHONO  
BASS +/buttons (20)  
SURROUND ON/OFF button (25, 26, 28)  
SURROUND MODE button (25, 26, 28)  
BASS BOOST button (20)  
SOUND button (20, 27, 28, 30) *  
DIMMER button (12)  
MUTING button (12)  
CATV/DBS CONTROL button (37) *  
TV/VIDEO button (36, 37)  
CH (channel) +/buttons (36 38)  
TUNING +/buttons (21)  
REC PAUSE button (35, 36, 38)  
TREBLE +/buttons (20)  
2
3
4
5
6
7
8
9
p
q
w
e
r
1
a
b
MEMORY button (21, 22)  
Display (10)  
2
3
, VCR  
, TV  
,
CATV/DBS  
DVD  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
2
3
4
ADJUST button (19, 20, 27 29, 30)  
Remote sensor (3)  
SETTING button (14, 16 18)  
MASTER VOLUME control (11)  
PHONES jack (12)  
SURROUND ON/OFF button (25, 27, 29)  
SURROUND MODE button (25, 27, 29)  
INPUT ANALOG/DIGITAL button (15)  
INPUT ATT button (19)  
SPEAKERS ON/OFF 1 button (11, 12)  
SPEAKERS ON/OFF 2 button (11, 12)  
BASS BOOST button (20)  
SOURCE NAME buttons (11)  
Source selecting buttons  
(10, 11, 15, 21, 22, 30)  
DVD MULTI, DVD, VCR,  
TV SOUND/DBS, CD, TAPE/CDR,  
PHONO, FM/AM  
CD  
TV/DBS  
TAPE/CDR PHONO  
BASS  
TREBLE  
y
+
+
SURROUND SURROUND ANALOG/DIGITAL SLEEP  
ON/OFF  
MODE  
INPUT  
5
6
7
8
u
i
4
5
6
7
8
9
p
q
w
e
r
t
y
u
i
o
CENTER +  
BASS BOOST EFFECT  
1
TEST  
2
3
MENU  
REAR • L +  
SOUND  
4
5
6
ENTER  
t
DIMMER  
MUTING  
REAR • R +  
o
7/P  
8
9
9
p
SUBWOOFER +  
y
u
i
10  
RETURN  
0
+10  
+
100  
FM MODE  
CATV/DBS  
CONTROL  
;
a
q
+
+
+
CH  
TV VOL  
VOLUME  
TV/VIDEO  
w
e
+
/REW  
FF/  
TUNING  
r
o
CONTROL UP5/DOWNbuttons  
(14, 16 20, 27 29, 30)  
SLEEP button (12)  
s
d
ANALOG/DIGITAL INPUT button (15)  
10 keys for selecting preset channels (22)  
10 keys for adjusting sound (20, 27, 28, 30)  
10 keys for operating audio/video components  
(35 39)  
REC  
PAUSE  
t
CONTROL  
RM-SRX7020J REMOTE CONTROL  
;
a
s
TV VOL (volume) +/buttons (36, 37)  
VOLUME +/buttons (11)  
Operating buttons for audio/video components  
(35 38)  
d
CONTROL button (34 36) *  
* When you press one of these buttons, the remote control operation mode appears on  
the display window.  
Buttons on the Remote Control  
TV/DBS  
Remote Control Operation Mode  
Buttons on the Remote Control  
Remote Control Operation Mode  
TV  
VCR  
FM/AM  
CD  
TUNER  
CD  
VCR  
CATV/DBS CONTROL  
CONTROL  
DBS  
PHONO  
TAPE/CDR  
DVD  
PHONO  
TAPE  
DVD  
VCR or TAPE  
or CDDSC  
SOUND  
SOUND  
DVD MULTI  
DVD  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Putting Batteries in the Remote Control  
Before Installation  
General Precautions  
DO NOT insert any metal object into the unit.  
DO NOT disassemble the unit or remove screws, covers, or  
cabinet.  
Before using the remote control, put two supplied batteries first.  
When using the remote control, aim the remote control directly at  
the remote sensor on the unit.  
1 On the back of the remote control, remove the  
DO NOT expose the unit to rain or moisture.  
battery cover.  
Locations  
Install the unit in a location that is level and protected from  
moisture.  
The temperature around the unit must be between 5˚C and 35˚C  
(23˚F and 95˚F).  
Make sure there is good ventilation around the unit. Poor  
ventilation could cause overheating and damage the unit.  
Handling the unit  
DO NOT touch the power cord with wet hands.  
DO NOT pull on the power cord to unplug the cord. When  
unplugging the cord, always grasp the plug so as not to damage  
the cord.  
2 Insert batteries.  
Make sure to match the polarity: (+) to (+) and () to ().  
Keep the power cord away from the connecting cords and the  
antenna. The power cord may cause noise or screen interference. It  
is recommended to use a coaxial cable for antenna connection,  
since it is well-shielded against interference.  
When a power failure occurs, or when you unplug the power cord,  
the preset settings such as preset FM/AM channels and sound  
adjustments may be erased in a few days.  
Checking the Supplied Accessories  
Check to be sure you have all of the following supplied accessories.  
The number in the parentheses indicates the quantity of the pieces  
supplied.  
3 Replace the cover.  
• Remote Control (1)  
• Batteries (2)  
• AM Loop Antenna (1)  
• FM Antenna (1)  
If anything is missing, contact your dealer immediately.  
If the range or effectiveness of the remote control decreases, replace  
the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.  
CAUTION:  
Follow these precautions to avoid leaking or cracking cells:  
Place batteries in the remote control so they match the polarity:  
(+) to (+) and () to ().  
Use the correct type of batteries. Batteries that look similar may  
differ in voltage.  
Always replace both batteries at the same time.  
Do not expose batteries to heat or flame.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Connecting the FM and AM Antennas  
AM Loop Antenna  
(supplied)  
Outdoor FM antenna (not supplied)  
If FM reception is poor, connect outdoor FM  
antenna.  
or  
FM 75  
AXIAL  
FM 75  
AXIAL  
CO  
CO  
Standard type  
outdoor FM antenna  
(not supplied)  
Supplied FM  
antenna  
ANTENNA  
FM 75  
COAXIAL  
FM antenna (supplied)  
Extend the supplied FM antenna horizontally.  
Snap the tabs on the loop  
into the slots of the base  
to assemble the AM loop  
antenna.  
AM  
LOOP  
AM  
EXT  
If AM reception is poor, connect  
outdoor single vinyl-covered wire  
(not supplied).  
1
2
3
/CR  
PR  
/CB  
PB  
2
+
Y
16  
32  
FRONT  
:
8
SPEAKERS  
2
:16  
CAUTION  
:
SPEAKER IMPEDANCE  
2
AND  
OR  
+
1
1
COMPONENT VIDEO  
MONITOR OUT  
1
DVD  
REAR  
SPEAKERS  
FM X7I5AL  
+
ANTENNACOA  
DBS  
CENTER  
SPEAKER  
AV  
RIGHT  
+
COMPU LINK-III  
MONITOR  
OUT  
COMPU LINK-4  
(SYNCHRO)  
IHT  
AM  
LOOP  
DVD  
AL 1  
)
PHONO  
CD  
OUT  
(REC)  
VCR  
LEFT  
AUDIO  
RIGHT  
DIGITDVD  
(
CAUTION  
SPEAKER  
:
IMPEDANCE  
IN  
Y)  
1
6
(PLA  
8
FRONT  
SUB  
)
OUT  
ER  
T  
CD  
TV  
(
(REC)  
AL 2  
DIGIT  
E
P
TA  
/CDR  
IN  
Y)  
)
)
S-VIDEO  
OOFER  
REAR  
(
(PLA  
AL 3  
DIGIT  
VIDEO  
OUT  
RIGHT  
(REC)  
CDR  
(
VIDEO  
VCR  
L
4
A
IN  
Y)  
DIGIT  
AL  
(PLA  
UBWOOFER  
OUT  
DOLBY DIGI
LEFT  
AUDIO  
/
/
PCM  
DTS  
AL IN  
DIGIT  
TV  
SOUND  
/DBS  
RIGHT  
AL/PCM  
AM antenna connection  
/DTS  
DOLBY DIGIT  
AL OUT  
DIGIT  
Connect the supplied AM loop antenna to the AM LOOP  
terminals.  
Turn the loop until you have the best reception.  
If the reception is poor, connect an outdoor single vinyl-  
covered wire (not supplied) to the AM EXT terminal. (Keep the  
AM loop antenna connected.)  
Notes:  
FM antenna connection  
If the AM loop antenna wire is covered with vinyl,  
remove the vinyl while twisting it as shown to the  
right.  
Make sure the antenna conductors do not touch any  
other terminals, connecting cords and power cord.  
This could cause poor reception.  
Connect the supplied FM antenna to the FM 75 COAXIAL  
terminal as temporary measure.  
Extend the supplied FM antenna horizontally.  
If the reception is poor, connect an outdoor FM antenna (not  
supplied). Before attaching a 75 coaxial cable (with a  
standard type connector), disconnect the supplied FM antenna.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOfor the subwoofer, LARGEfor the front speakers, and  
SMALLfor the center and rear speakers are initial settings. To  
get best possible sound, change the subwoofer and speaker settings  
to fit your listening conditions.  
Connection diagram  
FRONT  
SPEAKERS  
1
Connecting the Speakers  
Speaker layout diagram  
FRONT  
SPEAKERS  
1
2
+
+
Center  
speaker  
Right front  
speaker  
Left front  
speaker  
Subwoofer  
R
X
-
7
0
2
0
V
A
U
D
I
O
/
V
I
D
E
O
C
O
N
T
R
O
L
R
E
C
E
I
V
E
R
F
M
/
A
M
T
U
N
I
N
G
F
M
/
A
M
P
R
E
S
E
T
FM MODE  
MEMORY  
COMPULINK  
Remote  
STANDBY  
M
A
S
T
E
R
V
O
L
U
M
E
D
S
I
G
I
T
A
L
U
R
R
O
U
N
D
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
INPUT  
B
A
S
S
B
O
O
S
T
A
D
J
U
S
T
S
E
T
T
I
N
G
D
V
D
M
U
L
T
I
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
I
N
P
U
T
A
T
T
RIGHT  
LEFT  
CONTROL  
DOWN UP  
S
P
E
A
K
E
R
S
O
N
/
O
F
F
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
S
O
U
R
C
E
N
A
M
E
PHONES  
RIGHT  
LEFT  
Left rear  
speaker  
Right rear  
speaker  
FRONT  
SPEAKERS  
2
After connecting the front, center, rear speakers and/or subwoofer,  
set the speaker setting information properly to obtain the best  
possible Surround effects. For details, see pages 16 to 18.  
Connecting speakers to the FRONT SPEAKERS 1 terminals  
CAUTION:  
1
2
3
4
Use speakers with the SPEAKER IMPEDANCE indicated by the  
speaker terminals.  
1
1
1
RIGHT  
RIGHT  
RIGHT  
Connecting the front speakers  
You can connect two pairs of front speakers (one pair to the FRONT  
SPEAKERS 1 terminals, and the other pair to the FRONT  
SPEAKERS 2 terminals).  
For each speaker , connect the (+) and () terminals on the rear  
panel to the (+) and () terminals marked on the speakers.  
About the speaker impedance  
1 Cut, twist and remove the insulation at the end of  
The required speaker impedance of the front speakers does differ  
depending on whether both the FRONT SPEAKERS 1 and FRONT  
SPEAKERS 2 terminals are used or only one of them is used.  
each speaker signal cable (not supplied).  
2 Turn the knob counterclockwise.  
3 Insert the speaker signal cable.  
4 Turn the knob clockwise.  
CASE 1 When you connect only one pair of front speakers  
Front  
speaker  
1
Front  
speaker  
1
Connecting speakers to the FRONT SPEAKERS 2 terminals  
2
3
1
1
2
Use front speakers with 8 16 impedance.  
CASE 2 When you connect two pairs of front speakers  
Front  
speaker  
2
Front  
speaker  
2
For each speaker, connect the (+) and () terminals on the rear panel  
to the (+) and () terminals marked on the speakers.  
Front  
speaker  
1
Front  
speaker  
1
1 Cut, twist and remove the insulation at the end of  
each speaker cord.  
2 Open the terminal (1), then insert the speaker  
cord (2).  
3 Close the terminal.  
Use front speakers with 16 32 impedance.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Connecting the rear and center speakers  
Connecting Audio/Video Components  
Connect rear speakers to the REAR SPEAKERS terminals and a  
center speaker to the CENTER SPEAKER terminals.  
Turn the power off to all components before connections.  
You can connect the following audio/video components to this unit.  
Refer also to the manuals supplied with your components.  
Center  
speaker  
Audio Components  
Turntable  
Video Components  
VCR  
TV*  
or DBS tuner*  
DVD player*  
CENTER  
SPEAKER  
REAR  
SPEAKERS  
CD player*  
Cassette deck  
or CD recorder*  
+
Left rear  
speaker  
Right rear  
speaker  
* You can connect these components using the methods described in  
Analog connections(below) or in Digital connections(see page 9).  
Analog connections  
RIGHT  
LEFT  
Audio component connections  
Use the cables with RCA pin plugs (not supplied).  
Connect the white plug to the audio left jack, and the red plug to the  
audio right jack.  
CAUTION:  
4
1
2
3
If you connect a sound-enhancing device such as a graphic equalizer  
between the source components and this receiver, the sound output  
through this receiver may be distorted.  
1
1
1
RIGHT  
RIGHT  
RIGHT  
Turntable  
For each speaker , connect the (+) and () terminals on the rear  
panel to the (+) and () terminals marked on the speakers.  
If an earth cable is provided for your  
turntable, connect the cable to the  
AM LOOP(H) terminal on the rear  
panel.  
1 Cut, twist and remove the insulation at the end of  
each speaker signal cable (not supplied).  
2 Turn the knob counterclockwise.  
3 Insert the speaker signal cable.  
4 Turn the knob clockwise.  
Turntable  
PHONO  
Connecting the subwoofer speaker  
CD  
By connecting a subwoofer, you can enhance the bass or reproduce  
the original LFE signals recorded in the digital software.  
To audio  
output  
OUT  
(REC)  
TAPE  
CDR  
AUDIO  
RIGHT  
LEFT  
IN  
(PLAY)  
FRONT  
Powered subwoofer  
OUT  
Ex.: This connection is for the  
turntable with an MM (moving-  
magnet) type cartridge.  
(REC)  
DVD  
VCR  
SUB  
CENTER  
IN  
WOOFER  
(PLAY)  
REAR  
TV  
SOUND  
DBS  
RIGHT  
LEFT  
RIGHT  
LEFT  
AUDIO  
Note:  
SUBWOOFER  
OUT  
Any turntables incorporating a small-output cartridge such as an MC  
(moving-coil) type must be connected to this receiver through a  
commercial head amplifier or step-up transformer. Direct connection  
may result in insufficient volume.  
Connect the input jack of a powered subwoofer to the  
SUBWOOFER OUT jack on the rear panel, using a cable with RCA  
pin plugs (not supplied).  
Refer also to the manual supplied for your subwoofer.  
Since bass sound is non-directional, you can place a  
subwoofer wherever you like. Normally place it in front of  
you.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video component connections  
CD player  
Use the cables with RCA pin plugs (not supplied).  
Connect the white plug to the audio left jack, the red plug to the  
audio right jack, and the yellow plug to the video jack.  
If video components have S-video (Y/C-separation) and/or  
component video (Y, PB/CB, PR/CR) terminals, connect them using  
an S-video cable (not supplied) and/or component video cable (not  
supplied). By using these terminals, you can get a better picture  
quality in the order Component video > S-video > Composite  
video.  
PHONO  
CD  
CD player  
OUT  
(REC)  
TAPE  
CDR  
To audio output  
IN  
(PLAY)  
OUT  
(REC)  
VCR  
IN  
(PLAY)  
IMPORTANT:  
TV  
SOUND  
DBS  
This unit is equipped with the following video terminals ; composite  
video, S-video and component video terminals.You can use any of  
these three to connect a video component.  
RIGHT  
LEFT  
AUDIO  
However, remember that the video signals from one type of these  
input terminals are output only through the video output  
terminals of the same type.  
Therefore, if a recording video component and a playing video  
component are connected to the unit through the different types of  
video terminals, you cannot record the picture from the playing  
component onto the recording component. In addition, if the TV and a  
playing video component are connected to the unit through the  
different types of video terminals, you cannot view the playback  
picture from the playing component on the TV.  
Cassette deck or CD recorder  
Cassette deck  
To audio input  
To audio output  
PHONO  
CD  
VCR  
OUT  
(REC)  
S-VHS (or VHS) VCR  
C
D
TAPE  
CDR  
A
IN  
(PLAY)  
B
OUT  
E
F
(REC)  
VCR  
IN  
PHONO  
CD  
(PLAY)  
TV  
SOUND  
DBS  
MONITOR  
OUT  
RIGHT  
LEFT  
OUT  
AUDIO  
(REC)  
AUDIO  
RIGHT  
LEFT  
TAPE  
CDR  
FRONT  
DVD  
IN  
(PLAY)  
DVD  
OUT  
To audio output  
OUT  
To audio input  
SUB  
WOOFER  
CENTER  
(REC)  
(REC)  
CD recorder  
VCR  
VCR  
REAR  
IN  
IN  
(PLAY)  
(PLAY)  
RIGHT  
LEFT  
TV  
SOUND  
DBS  
DBS  
Note:  
S-VIDEO  
VIDEO  
RIGHT  
LEFT  
VIDEO  
SUBWOOFER  
OUT  
You can connect either a cassette deck or a CD recorder to the TAPE/  
CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks,  
change the source name, which will be shown on the display when  
selected as the source. See page 11 for details.  
AUDIO  
Å To left/right channel audio output  
ı To left/right channel audio input  
Ç To composite video output  
Î To S-video output  
If your audio components have a COMPU LINK jack  
See also page 31 for detailed information about the connection and  
the COMPU LINK remote control system.  
To S-video input  
Ï To composite video input  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
DVD player  
TV and/or DBS tuner  
When you connect the DVD player with stereo output jacks:  
PHONO  
Y
PB/CB  
PR/CR  
COMPONENT VIDEO  
MONITOR OUT  
DVD player  
D
CD  
DVD  
MONITOR  
OUT  
DVD  
DBS  
OUT  
AUDIO  
RIGHT LEFT  
C
(REC)  
TAPE  
CDR  
B
A
FRONT  
IN  
DVD  
(PLAY)  
DVD  
SUB  
WOOFER  
OUT  
CENTER  
OUT  
(REC)  
(REC)  
VCR  
VCR  
Y
PB/CB  
PR/CR  
COMPONENT VIDEO  
MONITOR OUT  
REAR  
IN  
IN  
(PLAY)  
(PLAY)  
RIGHT  
LEFT  
TV  
SOUND  
DBS  
MONITOR  
OUT  
DVD  
DBS  
DBS  
AUDIO  
RIGHT  
LEFT  
SUBWOOFER  
OUT  
S-VIDEO  
VIDEO  
VIDEO  
RIGHT  
LEFT  
AUDIO  
DVD  
FRONT  
DVD  
OUT  
SUB  
CENTER  
(REC)  
WOOFER  
VCR  
REAR  
B
C
IN  
(PLAY)  
TV  
RIGHT  
LEFT  
DBS  
S-VIDEO  
VIDEO  
A
D
VIDEO  
SUBWOOFER  
OUT  
Å To front left/right channel audio output  
ı To composite video output  
Ç To S-video output  
Å To audio output  
ı To composite video input  
Ç To S-video input  
Î To component video output  
Î To component video input  
Y
PB/CB  
PR/CR  
When you connect the DVD player with its analog discrete output  
(5.1 CH reproduction) jacks:  
COMPONENT VIDEO  
MONITOR OUT  
PHONO  
CD  
MONITOR  
OUT  
DVD  
DBS  
OUT  
AUDIO  
RIGHT  
DVD player  
(REC)  
G
A
TAPE  
CDR  
LEFT  
DVD  
IN  
FRONT  
DVD  
(PLAY)  
DVD  
OUT  
E
F
(REC)  
OUT  
SUB  
CENTER  
(REC)  
WOOFER  
VCR  
VCR  
B
C
D
IN  
REAR  
(PLAY)  
IN  
(PLAY)  
RIGHT  
LEFT  
TV  
SOUND  
DBS  
DBS  
Y
PB/CB  
PR/CR  
COMPONENT VIDEO  
MONITOR OUT  
S-VIDEO  
VIDEO  
VIDEO  
RIGHT  
LEFT  
SUBWOOFER  
OUT  
AUDIO  
MONITOR  
OUT  
DVD  
DBS  
AUDIO  
RIGHT LEFT  
B
DVD  
FRONT  
DBS tuner  
A
DVD  
OUT  
DBS  
SUB  
WOOFER  
CENTER  
(REC)  
C
VCR  
REAR  
IN  
(PLAY)  
D
RIGHT  
LEFT  
DBS  
S-VIDEO  
VIDEO  
VIDEO  
SUBWOOFER  
OUT  
Å To audio output  
ı To composite video output  
Ç To S-video output  
Î To component video output  
Å To rear left/right channel audio output  
ı To subwoofer audio output  
Ç To front left/right channel audio output  
Î To center channel audio output  
To composite video output  
Ï To S-video output  
Notes:  
When connecting the DBS tuner to the TV SOUND/DBS jacks,  
change the source name, which will be shown on the display when  
selected as the source, to DBS.See page 11 for details.  
When operating the DBS tuner by using the AV COMPU LINK  
remote control system, change the video input terminal setting  
correctly. See pages 11 and 32 for details.  
Ì To component video output  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
Digital connections  
When shipped from the factory, the DIGITAL IN terminals have  
been set for use with the following components:  
DIGITAL 1 (coaxial): For DVD player  
DIGITAL 2 (optical): For CD player  
DIGITAL 3 (optical): For digital TV broadcast tuner  
DIGITAL 4 (optical): For CD recorder  
When you want to operate the CD player or CD recorder using the  
COMPU LINK remote control system, connect the target  
component also as described in Analog connections(see page 7).  
When you want to operate the DVD player using the AV COMPU  
LINK remote control system, connect the DVD player also as  
described in Analog connections(see page 8).  
This receiver is equipped with four DIGITAL IN terminals one  
digital coaxial terminal and three digital optical terminals, and one  
DIGITAL OUT terminal.  
You can connect any digital equipments such as :  
DBS tuner,  
Digital TV broadcast tuner,  
DVD player,  
CD player, and  
CD recorder.  
IMPORTANT:  
When connecting the DVD player, digital TV broadcast tuner or DBS  
tuner using the digital terminals, you also need to connect it to the  
video jack on the rear. Without connecting it to the video jack, you  
can view no playback picture.  
After connecting the components using the DIGITAL IN terminals,  
set the following correctly if necessary:  
Set the digital input (DIGITAL IN) terminal setting correctly. For  
details, see Setting the Digital Input (DIGITAL IN) Terminalson  
page 14.  
Digital output terminal  
This terminal can output the same type of incoming signals Dolby  
Digital, Linear PCM, and DTS.  
CD recorder, etc.  
Select the digital input mode correctly. For details, see Selecting  
the Analog or Digital Input Modeon page 15.  
Digital input terminals  
Digital optical cable (not supplied)  
between digital optical terminals  
Digital TV  
DBS tuner  
DBS  
DVD player  
When the digital recording  
DVD  
equipment such as a CD recorder  
has a digital optical input terminal,  
connect it to the DIGITAL OUT  
terminal enables you to perform  
CD player  
CD recorder  
DOLBY DIGITAL/PCM  
digital-to-digital recording.  
/DTS  
DIGITAL OUT  
Digital coaxial cable (not supplied)  
between digital coaxial terminals  
Connecting the Power Cord  
Digital optical cable (not supplied)  
between digital optical terminals  
Before plugging the receiver into an AC outlet, make sure that all  
connections have been made.  
Plug the power cord into an AC outlet.  
When the component has a digital  
coaxial output terminal, connect it to the  
DIGITAL 1 (DVD) terminal, using the  
digital coaxial cable (not supplied).  
DIGITAL 1  
(DVD)  
When the component has a digital  
optical output terminal, connect it to the  
DIGITAL 2 (CD), DIGITAL 3 (TV), or  
DIGITAL 4 (CDR) terminal, using the  
digital optical cable (not supplied).  
DIGITAL 2 ( CD )  
DIGITAL 3 ( TV )  
DIGITAL 4 (CDR)  
Keep the power cord away from the connecting cables and the  
antenna. The power cord may cause noise or screen interference. We  
recommend that you use a coaxial cable to connect the antenna,  
since it is well-shielded against interference.  
Before connecting a digital  
optical cable, unplug the  
protective plug.  
DOLBY DIGITAL  
CAUTIONS:  
/PCM  
/DTS  
Do not touch the power cord with wet hands.  
Do not pull on the power cord to unplug the cord. When  
unplugging the cord, always grasp the plug so as not to damage  
the cord.  
DIGITAL IN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Front Panel  
Remote Control  
STANDBY lamp  
Display  
A/V CONTROL RECEIVER  
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
SPK  
1
2
R
BASS BOOST  
TUNED STEREO AUTO MUTING SLEEP  
VOLUME  
ANALOG  
DIGITAL AUTO  
STANDBY  
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
CATV/DBS  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
Source  
Selecting  
MEMORY  
S.WFR LFE  
LINEAR PCM  
DIGITAL  
MASTER VOLUME  
AUDIO  
SLEEP  
LS  
S
RS  
DVD  
CD  
STANDBY/ON  
CH-  
TV/DBS  
TAPE/CDR PHONO  
BASS  
TREBLE  
Buttons  
+
+
INPUT  
SURROUND ON/OFF  
ANALOG/DIGITAL  
BASS BOOST  
SURROUND  
ON/OFF  
SURROUND ANALOG/DIGITAL SLEEP  
ADJUST SETTING  
MODE  
INPUT  
DVD MULTI  
DVD  
VCR  
TV UND/DBS  
SOURCE NAME  
INPUT ATT  
BASS BOOST EFFECT  
CENTER +  
1
TEST  
2
3
CONTROL  
DOWN UP  
MENU  
REAR L +  
SURROUND MODE  
SPEAKERS ON/OFF  
SOUND  
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
4
5
6
ENTER  
DIMMER  
MUTING  
REAR R +  
DIMMER  
MUTING  
SOURCE NAME  
7/P  
8
9
SUBWOOFER +  
PHONES  
10  
RETURN  
0
+10  
100  
+
FM MODE  
CATV/DBS  
CONTROL  
+
+
+
VOLUME  
CH  
TV VOL  
VOLUME  
TV/VIDEO  
+/–  
+
/REW  
FF/  
TUNING  
Source  
Selecting  
Buttons  
MASTER  
VOLUME  
PHONES  
jack  
SOURCE  
NAME  
SPEAKERS  
ON/OFF  
REC  
PAUSE  
CONTROL  
RM-SRX7020J REMOTE CONTROL  
STANDBY/ON  
Turning On the Power  
Selecting the Source to Play  
Press STANDBY/ON  
(or AUDIO  
on the remote control).  
Press one of the Source Selecting Buttons. The selected source name  
appears on the display.  
STANDBY  
AUDIO  
DVD  
DVD MULTI  
VCR  
CD  
FM/AM  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
STANDBY/ON  
TV/DBS  
TAPE/CDR PHONO  
CD  
TAPE/CDR  
PHONO  
FM/AM  
On the front panel  
From the remote control  
SOURCE NAME  
The STANDBY lamp goes off. The name of the current source (or  
station frequency) appears on the display.  
On the front panel  
From the remote control  
Current source name appears  
DVD MULTI : Select the DVD player for viewing the digital video  
disc using the analog discrete output mode (5.1 CH  
reproduction).  
SPK  
1
ANALOG  
L
C
R
VOLUME  
S.WFR LFE  
LS  
S
RS  
CH-  
To enjoy the DVD MULTI playback, see page 30.  
DVD  
VCR  
: Select the DVD player.  
: Select the VCR.  
Current volume level is shown here  
TV SOUND/DBS  
: Select the TV sound (or the DBS tuner).  
: Select the CD player.  
TAPE/CDR * : Select the cassette deck (or the CD recorder).  
To turn off the power (into standby mode)  
STANDBY  
Press STANDBY/ON  
(or AUDIO  
on  
CD *  
the remote control) again.  
The STANDBY lamp lights up.  
STANDBY/ON  
PHONO *  
FM/AM *  
: Select the turntable.  
: Select an FM or AM broadcast.  
Each time you press the button, the band  
alternates between FM and AM.  
Note:  
Notes:  
A small amount of power is consumed in standby mode. To turn the  
power off completely, unplug the AC power cord.  
When connecting a CD recorder (to the TAPE/CDR jacks) or a DBS  
tuner (to the TV SOUND/DBS jacks), change the source name that  
appears on the display. See Changing the source nameon page  
11.  
When you have connected some digital source components using  
the digital terminals (see page 9), you need to select the digital  
input mode (see page 15).  
When you press one of the source selecting buttons on the remote  
control marked above with asterisks (*), the receiver automatically  
turns on.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Volume  
Changing the source name  
Remote  
NOT  
When you have connected a CD recorder to the  
TAPE/CDR jacks or the DBS tuner to the TV  
SOUND/DBS jacks on the rear panel, change the  
source name which will be shown on the display.  
On the front panel:  
To increase the volume,  
turn MASTER VOLUME clockwise.  
To decrease the volume,  
MASTER VOLUME  
turn it counterclockwise.  
When changing the source name from “TAPE” to “CDR”:  
1 Press TAPE/CDR (SOURCE NAME)  
TAPE/CDR  
SOURCE NAME  
to select “TAPE” as the source.  
From the remote control:  
To increase the volume, press VOLUME +.  
To decrease the volume, press VOLUME –.  
+
VOLUME  
2 Press and hold SOURCE NAME  
TAPE/CDR  
(TAPE/CDR) to assign “CDR.”  
SOURCE NAME  
CAUTION:  
Always set the volume to the minimum before starting any source. If  
the volume is set at its high level, the sudden blast of sound energy  
can permanently damage your hearing and/or ruin your speakers.  
When changing the source name from “TV SOUND” to “DBS”:  
1 Press TV SOUND/DBS (SOURCE  
TV SOUND/DBS  
Note:  
SOURCE NAME  
NAME) to select “TV SOUND” as  
The volume level can be adjusted within the range of 0(minimum) to  
50(maximum).  
the source.  
2 Press and hold SOURCE NAME  
TV SOUND/DBS  
SOURCE NAME  
(TV SOUND/DBS) to assign “DBS.”  
Remote  
NOT  
Selecting the Front Speakers  
To change the source name to “TAPE” or “TV SOUND,” repeat  
the same procedure above.  
When you have connected two pairs of the front speakers, you can  
select which to use.  
Notes:  
SPEAKERS ON/OFF  
To watch the picture from DBS tuner, change the source name to  
“DBS.If “TV SOUND” is selected, you cannot watch the picture  
from DBS tuner.  
1
2
• Without changing the source name, you can still use the connected  
components. However, there may be some inconvenience.  
– “TAPE” or “TV SOUND” will appear on the display when you  
select the CD recorder or DBS tuner.  
You cannot use the digital input (see page 15) for the CD  
recorder.  
To use the speakers connected to the FRONT SPEAKERS 1  
terminals, press SPEAKERS ON/OFF 1 so that the SPK 1 indicator  
lights up on the display. (Make sure that the SPK 2 is not lit on the  
display.)  
To use the speakers connected to the FRONT SPEAKERS 2  
terminals, press SPEAKERS ON/OFF 2 so that the SPK 2 indicator  
lights up on the display. (Make sure that the SPK 1 is not lit on the  
display.)  
You cannot use the COMPU LINK remote control system (see  
page 31) to operate the CD recorder.  
To use both sets of the speakers, press SPEAKERS ON/OFF 1 and 2  
so that the SPK 1 and SPK 2 indicators light up on the display.  
To use neither sets of the speakers, press SPEAKERS ON/OFF  
1 and 2 so that the SPK 1 and SPK 2 indicators disappear from the  
Selecting different sources for picture and sound  
You can watch picture from a video component while listening to  
sound from another component.  
display.  
Press one of the audio source selecting buttons —  
CD, TAPE/CDR, PHONO, FM/AM, while watching the picture  
from a video component such as the VCR, DVD player, or DBS  
tuner, etc.  
Notes:  
If you select any of the Surround modes while using both the speakers  
connected to the FRONT SPEAKERS 1 and 2 terminals, the  
speakers connected to the FRONT SPEAKERS 2 terminals are  
deactivated.  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
DVD  
DVD MULTI  
VCR  
CD  
FM/AM  
TV/DBS  
TAPE/CDR PHONO  
CD  
TAPE/CDR  
PHONO  
FM/AM  
While the surround mode is in use, you can only select either the  
speakers connected to the FRONT SPEAKERS 1 or 2 terminals.  
If you select the source to DVD MULTI while using both the speakers  
connected to the FRONT SPEAKERS 1 and 2 terminals, the  
speakers connected to the FRONT SPEAKERS 2 terminals are  
deactivated.  
When selecting DVD MULTIas the source, you can only select  
either the speakers connected to the FRONT SPEAKERS 1 or 2  
terminals.  
SOURCE NAME  
From the remote control  
On the front panel  
Notes:  
• Once you have selected a video source, pictures of the selected  
source are sent to the TV until you select another video source.  
• This function can use only when selecting the S-video or composite  
video input terminal.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Listening Only with Headphones  
Changing the Display Brightness  
You must turn off both pairs of speakers when you listen with  
headphones.  
You can dim the display.  
DIMMER  
Press DIMMER on the remote control.  
Each time you press the button, the display dims and  
brightens alternately.  
1 Connect a pair of headphones to the PHONES jack on the front  
panel.  
2 Press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2 so  
that neither the SPK 1 nor SPK 2 indicator appears on the  
display.  
• “HEADPHONEappears and H. PHONE indicator lights up  
on the display.  
Turning Off the Power  
with the Sleep Timer  
ANALOG  
L
R
H.PHONE  
You can fall asleep while listening to musicSleep Timer.  
SLEEP  
Press SLEEP on the remote control repeatedly.  
The SLEEP indicator lights up on the display, and the  
shut-off time changes in 10 minutes intervals.  
This cancels the Surround modes currently selected, and  
activates the HEADPHONE mode (see below).  
HEADPHONE mode  
When using the headphones, following signals are output  
SPK  
1
SLEEP  
ANALOG  
L
C
R
S.WFR LFE  
LS  
S
RS  
regardless of your speaker setting:  
CH-  
For 2 channel sources, the front left, right channel signals are  
output directly from the headphones.  
For multichannel sources, the front left and right, center, and  
rear channel signals are down-mixed and then output from the  
headphones.  
10  
20  
30  
40  
90  
50  
80  
60  
70  
(Canceled)  
0
You can enjoy multichannel sound sources using the  
headphones.  
When the shut-off time comes  
The receiver turns off automatically.  
Notes:  
While in the HEADPHONE mode, you cannot use any Surround  
modes (see page 23).  
Activating the speakers cancel the HEADPHONE mode and turns  
on the Surround modes previously selected.  
To check or change the remaining time until the shut-off time  
Press SLEEP once.  
The remaining time (in minutes) until the shut-off time appears.  
To change the shut-off time, press SLEEP repeatedly.  
CAUTION:  
To cancel the Sleep Timer  
Press SLEEP repeatedly until SLEEP 0 MINappears on the  
display. (The SLEEP indicator goes off.)  
Be sure to turn down the volume  
Before connecting or putting on headphones, as high volume can  
damage both the headphones and your hearing.  
Before turning on speakers again, as high volume may output from  
the speakers.  
Turning off the power also cancels the Sleep Timer.  
Turning Off the Sounds  
TemporarilyMuting  
You can turn off the volume temporarily.  
MUTING  
Press MUTING on the remote control to mute  
the sound through all speakers and headphones  
connected.  
• “MUTINGappears on the display and the volume turns off (the  
volume level indicator goes off).  
SPK  
1
ANALOG  
L
C
R
S.WFR LFE  
LS  
S
RS  
CH-  
To restore the sound, press MUTING again.  
Turning MASTER VOLUME on the front panel or pressing  
VOLUME +/on the remote control also restores the sound.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment auto memory  
This receiver memorizes sound settings for each source when:  
you turn off the power,  
you change the source, and  
you assign the source name.  
Signal and speaker indicators on the display  
Signal indicators  
Speaker indicators  
SPK  
1
ONETO
PR
ANALOG  
DIGITAL AUTO  
L
C
R
L
C
R
L
C
R
S.WFR LFE  
LINEAR PCM  
DIGITAL  
LS  
S
RS  
S.WFR LFE  
LS RS  
S.WFR LFE  
LS RS  
CH-  
When you change the source, the memorized settings for the  
newly selected source are automatically recalled.  
The following can be stored for each source:  
Input attenuator mode (see page 19)  
Balance (see page 19)  
S
S
The following signal indicators light up:  
L
: When digital input is selected: Lights up when the left  
channel signal comes in.  
Tone adjustment (see page 20)  
When analog input is selected: Always lights up.  
: When digital input is selected: Lights up when the right  
channel signal comes in.  
When analog input is selected: Always lights up.  
: When the center channel signal comes in.  
Subwoofer output level (see page 20)  
Surround mode selection (see pages 26 29)  
BASS BOOST (see page 20)  
R
C
Notes:  
LS : When the left rear channel signal comes in.  
RS : When the right rear channel signal comes in.  
: When the monaural rear channel signal or 2 ch Dolby  
Digital Surround encoded signal comes in.  
LFE: When the LFE channel signal comes in.  
You cannot assign and store different settings for digital input  
mode and analog input mode.  
If the source is FM or AM, you can assign a different setting for  
each band.  
S
For recording  
The speaker indicators light up when:  
For analog-to-analog recording  
The corresponding speaker is activated, and  
You can record any analog source through the receiver to :  
the cassette deck (or CD recorder) connected to the TAPE/CDR  
jacks, and  
The corresponding speaker is required for the current playback.  
Notes:  
the VCR connected to the VCR jacks at the same time.  
When you select DVD MULTI,all the signal indicators except S”  
light up.  
For digital-to-digital recording  
When SUBWOOFERis set to YES(see page 16),  
lights up.  
S.WFR  
You can record the currently selected digital input through the  
receiver to a digital recording device connected to the DIGITAL  
OUT terminal.  
Notes:  
Analog-to-digital and digital-to-analog recordings are not  
possible.  
The output volume level, bass boost (see page 20), tone  
adjustment (see page 20), and Surround modes (see page 23)  
cannot affect the recording.  
The test tone signal (see pages 26 and 27) does not come out  
through the DIGITAL OUT terminal.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Settings  
Front Panel  
Remote Control  
Display  
SETTING  
A/V CONTROL RECEIVER  
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
Source  
Selecting  
Buttons  
CATV/DBS  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
MEMORY  
DVD  
CD  
SPK  
1
2
R
BASS BOOST  
TUNED STEREO AUTO MUTING SLEEP  
VOLUME  
ANALOG  
DIGITAL AUTO  
STANDBY  
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
S.WFR LFE  
TV/DBS  
TAPE/CDR PHONO  
LINEAR PCM  
DIGITAL  
MASTER VOLUME  
LS  
S
RS  
STANDBY/ON  
CH-  
BASS  
TREBLE  
ANALOG/  
DIGITAL  
INPUT  
+
+
SURROUND  
ON/OFF  
SURROUND ANALOG/DIGITAL SLEEP  
MODE INP
BASS BOOST EFFECT  
CENTER +  
INPUT  
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
BASS BOOST  
ADJUST SETTING  
1
2
3
MENU  
REAR L +  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
SOUND  
TEST  
INPUT ATT  
4
5
6
ENTER  
DIMMER  
MUTING  
REAR R +  
CONTROL  
DOWN  
UP  
SPEAKERS ON/OFF  
7/P  
8
9
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
SUBWOOFER +  
10  
RETURN  
0
+10  
100  
+
SOURCE NAME  
FM MODE  
CATV/DBS  
CONTROL  
PHONES  
+
+
+
CH  
TV VOL  
VOLUME  
TV/VIDEO  
+
/REW  
FF/  
TUNING  
REC  
PAUSE  
Source  
Selecting  
Buttons  
INPUT  
ANALOG/DIGITAL  
CONTROL  
RM-SRX7020J REMOTE CONTROL  
CONTROL  
UP 5/DOWN ∞  
Setting the Digital Input  
[DIGITAL IN] Terminals  
When the DIGITAL 1 terminal is set, the DIGITAL 2/3/4  
terminals are set automatically as follows:  
Remote  
NOT  
When the DIGITAL 1 is set to “DVD”  
When you use the digital input terminals, you have to register what  
components are connected to which terminals (DIGITAL IN 1/2/3/4).  
2 CD 3 TV (or DBS*) 4 CDR  
When the DIGITAL 1 is set to “CD”  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
2 DVD 3 TV (or DBS*) 4 CDR  
When the DIGITAL 1 is set to “TV” or “DBS”  
2 DVD 3 CD 4 CDR  
To set the DIGITAL 1 terminal  
T
SETTING  
1 Press SETTING repeatedly until  
“COAX DIGI IN” appears on the  
display.  
When the DIGITAL 1 is set to “CDR”  
2 DVD 3 CD 4 TV (or DBS*)  
* If you have changed the source name from TV SOUNDto  
DBS,” “DBSappears (see page 11).  
SPK  
1
L
C
R
DIGITAL AUTO  
S.WFR LFE  
LS  
S
RS  
Press SETTING repeatedly until OPT DIGI INappears on the  
CH-  
display.  
After 2 seconds, the display changes to show the current setting.  
After 2 seconds, the display changes to show the current setting.  
SPK  
1
L
C
R
DIGITAL AUTO  
DIGITAL 3 terminal setting  
S.WFR LFE  
LS  
S
RS  
CH-  
CONTROL  
DOWN UP  
2 Press CONTROL UP 5/DOWN ∞  
to select the appropriate digital  
terminal setting.  
DIGITAL 2 terminal setting  
DIGITAL 4 terminal setting  
• Each time you press the button, the display  
changes as follows:  
Notes:  
When shipped from the factory, the DIGITAL IN terminals can be  
used as the digital input for the following components:  
DIGITAL 1 (coaxial): For DVD player  
1 DVD j 1 CD j 1 TV (or 1 DBS*) j 1 CDR j  
(back to the beginning)  
DIGITAL 2 (optical): For CD player  
DIGITAL 3 (optical): For TV  
DIGITAL 4 (optical): For CDR  
When using the DIGITAL 4 terminal for the CD recorder, you need  
to select CDRas the source name. (See page 11.)  
* If you have changed the source name from “TV SOUND” to  
“DBS,DBS” appears (see page 11).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the following symptoms occur while playing Dolby Digital  
or DTS Digital Surround software with DIGITAL AUTO”  
selected, follow the procedure below:  
Selecting the Analog or Digital Input  
Mode  
Sound does not come out at the beginning of playback.  
Noise comes out while searching or skipping chapters or  
tracks.  
When you have connected digital source components using both the  
analog connection (see page 6) and the digital connection (see page  
9) methods, you need to select the input mode correctly.  
1 Press INPUT ANALOG/DIGITAL (or  
ANALOG/ DIGITAL INPUT on the remote  
control.)  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
INPUT  
ANALOG / DIGITAL  
ANALOG/DIGITAL  
1 Press one of the source selecting buttonsDVD,  
TV SOUND/DBS (TV/DBS on the remote  
control), CD, or TAPE/CDR*for which you  
want to change the input mode.  
INPUT  
INPUT ATT  
On the front panel  
From the remote control  
DVD  
DVD MULTI  
CD  
FM/AM  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
2 Press CONTROL UP 5/DOWN to  
select DOLBY DIGITALor DTS  
SURROUNDwhile DIGITAL  
TV/DBS  
VCR  
TAPE/CDR PHONO  
Remote  
NOT  
CD  
TAPE/CDR  
PHONO  
FM/AM  
SOURCE NAME  
AUTOstill remains on the display.  
Each time you press the button, the digital input mode changes  
as follows:  
From the remote control  
On the front panel  
Note:  
When DOLBY DIGITALor DTS SURROUND”  
is selected, DIGITAL AUTOgoes off.  
* Among the sources listed above, you can select the digital input  
only for the sources which you have selected the digital input  
terminals for. (See Setting the Digital Input (DIGITAL IN)  
Terminalson page 14.)  
SPK  
L
C
R
DIGITAL AUTO  
DIGITAL  
S.WFR LFE  
LS  
S
RS  
CH-  
DIGITAL AUTO  
DOLBY DIGITAL  
DTS SURROUND  
2 Press INPUT ANALOG/DIGITAL  
(or ANALOG/DIGITAL INPUT on the remote  
control) to select the digital input mode.  
To play back software encoded with Dolby Digital, select  
DOLBY DIGITAL.”  
To play back software encoded with DTS Digital Surround,  
select DTS SURROUND.”  
INPUT  
ANALOG / DIGITAL  
ANALOG/DIGITAL  
INPUT  
INPUT ATT  
Note:  
On the front panel  
From the remote control  
When you turn off the power or select another source, DOLBY  
DIGITALand DTS SURROUNDare canceled and the digital input  
mode is automatically reset to DIGITAL AUTO.”  
Each time you press the button, the input mode alternates  
between the analog input (ANALOG) and the digital input  
(DIGITAL AUTO).  
The followings are the analog/digital signal indicators on the display  
to indicate what type of the signal comes into the receiver.  
DIGITAL AUTO : Select this for the digital input mode. The  
receiver automatically detects the  
incoming signal format. (The DIGITAL  
AUTO indicator lights up on the display,  
then the digital signal indicator for the  
detected signals lights up.)  
ANALOG  
: Lights when the analog input is selected.  
LINEAR PCM : Lights when Linear PCM signals come in.  
DIGITAL : Lights when Dolby Digital signals come in.  
Flashes when DOLBY DIGITALis  
selected for software not encoded with Dolby  
Digital signals.  
ANALOG  
: Select this for the analog input mode.  
(Initial setting when shipped from the  
factory.)  
: Lights when DTS signals come in.  
Flashes when DTS SURROUNDis  
selected for software not encoded with DTS  
signals.  
Note:  
When DIGITAL AUTOcannot recognize the incoming signals, no  
digital signal indicators light up on the display.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Settings  
NOfor the subwoofer, LARGEfor the front speakers, and  
SMALLfor the center and rear speakers are initial settings. To  
get best possible sound, change the subwoofer and speaker settings  
to fit your listening conditions.  
Selecting the Video Input  
Terminal  
Remote  
NOT  
This receiver is equipped with the component video input terminals  
for the DVD player and DBS tuner, which give you higher picture  
quality. When you use the component video input terminals for the  
DVD player and/or DBS tuner, change the video input terminal  
setting.  
Remote  
Setting the Speaker Information  
NOT  
To obtain the best possible sound or effect from Surround modes  
(see pages 26 to 29), register the following speakers and subwoofer  
information after all connections are completed.  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
SSETTING  
The followings are items you can set:  
1 Press SETTING repeatedly until  
Subwoofer informationSUBWOOFER  
Speaker sizeFRNT SP, CNTR SP, REAR SP  
Speaker distanceUNIT, FRNT DIS, CNTR DIS, REAR DIS  
Crossover frequencyCROSS  
Low frequency effect attenuatorLFE ATT  
Dynamic range compressionD. COMP  
VIDEO IN DVD or VIDEO IN  
DBS appears on the display.  
Select VIDEO IN DVDto select the video input terminal for  
the DVD player and VIDEO IN DBSfor the DBS tuner.  
SPK  
1
L
C
R
DIGITAL AUTO  
LINEAR PCM  
CH-  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
After 2 seconds, the display changes to show the current setting.  
Subwoofer information  
Register whether you have connected a subwoofer or not.  
2 Press CONTROL UP 5/DOWN ∞  
CONTROL  
DOWN  
UP  
to select the appropriate type of  
the video input terminal.  
Each time you press the button, the display  
changes as follows:  
SSETTING  
1 Press SETTING repeatedly until  
SUBWOOFER(with the current  
setting)* appears on the display.  
COMPONENT  
(Component)  
S/C  
SPK  
1
(S-video/Composite)  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
CH-  
COMPONENT : Select this when you connect the DVD  
player or DBS tuner to the component video  
input terminals.  
* NOis the initial setting. If you have already changed the  
setting, YESwill be shown.  
S/C  
: Select this when you connect the DVD player  
or DBS tuner to the S-video or composite  
video input terminal.  
CONTROL  
2 Press CONTROL UP 5/DOWN to  
DOWN  
UP  
register whether you have connected  
a subwoofer or not.  
Each time you press the button, the subwoofer  
setting alternates between YESand NO.”  
Note:  
Without changing the video input terminal setting, you can see the  
picture through the video input terminals, but cannot use the AV  
COMPU LINK remote control system correctly (see page 32).  
YES  
NO  
: Select this when you have connected a subwoofer.  
You can adjust the subwoofer output level  
(see page 20).  
: Select this when you have not connected or have  
disconnected a subwoofer.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
SETTING  
Speaker size  
1 Press SETTING repeatedly until  
UNIT(with the current setting)*  
appears on the display.  
Register the sizes of all the connected speakers.  
When you change your speakers, register the information about  
the speakers again.  
SPK  
1
L
C
R
SSETTING  
DIGITAL AUTO  
LINEAR PCM  
1 Press SETTING repeatedly until  
S.WFR LFE  
LS  
S
RS  
CH-  
FRNT SP (Front Speaker), CNTR  
SP (Center Speaker)or REAR SP  
(Rear Speaker)(with the current setting)*  
appears on the display.  
*METERis the initial setting. If you have already changed the  
setting, FEETwill be shown.  
CONTROL  
2 Press CONTROL UP 5/DOWN to  
DOWN  
UP  
SPK  
1
L
C
R
DIGITAL AUTO  
LINEAR PCM  
select the unit.  
S.WFR LFE  
LS  
S
RS  
Each time you press the button, the setting  
alternates between METERand FEET.”  
CH-  
* LARGEis the initial setting for the front speakers and  
SMALLis for the center and rear speakers. If you have  
already changed the setting, another size will be shown.  
METER : Speaker distance is shown in meter.  
FEET  
: Speaker distance is shown in feet.  
CONTROL  
2 Press CONTROL UP 5/DOWN to  
DOWN  
UP  
T
SETTING  
select the appropriate item about the  
3 Press SETTING repeatedly until  
FRNT DIS (Front distance),” “CNTR  
DIS (Center distance)or REAR DIS  
speaker selected in the above step.  
Each time you press the button, the display  
changes as follows:  
(Rear distance)(with the current setting)*  
appears on the display.  
SMALL  
LARGE  
The display shows the current setting in the unit selected in  
step 2.  
NONE  
* 3.0mis the initial setting for meter and 10FTis for feet. If  
you have already changed the setting, another value will be  
shown.  
LARGE : Select this when the speaker size is relatively large.  
(See Noteson the below.)  
4 Press CONTROL UP 5/DOWN to  
CONTROL  
SMALL : Select this when the speaker size is relatively small.  
(See Noteson the below.)  
DOWN  
UP  
select the appropriate speaker  
distance.  
NONE  
: Select this when you have not connected a speaker.  
(Not selectable for the front speakers)  
If you select METERin step 2, the value is  
changed from 0.3mto 9.0mby 0.3 m step.  
If you select FEETin step 2, the value is changed from  
1FTto 30FTby 1 foot step.  
3 Repeat steps 1 and 2 to select the appropriate  
items for other speakers.  
Left front  
speaker  
Right front  
speaker  
Center speaker  
Notes:  
Keep the following comment in mind as reference when adjusting.  
If the size of the cone speaker unit built in your speaker is greater  
than 12 cm (4 3/4 inches), select LARGE,and if it is smaller than  
12 cm (4 3/4 inches), select SMALL.”  
If you have selected NOfor the subwoofer setting, you can only  
select LARGEfor the front speaker setting.  
3.0 m  
(10 feet)  
2.7 m  
(9 feet)  
2.4 m  
(8 feet)  
2.1 m  
(7 feet)  
If you have selected SMALLfor the front speaker setting, you  
cannot select LARGEfor the center and rear speaker settings.  
Left rear  
speaker  
Right rear  
speaker  
Speaker distance  
Register the unit you use, then the speaker distance from your  
listening point.  
Example: In this case,  
If you have set the unit before, start from step 3.  
Speaker distance is not valid for the DVD MULTI playback mode.  
set FRNT DISto 3.0mor 10FT,”  
set CNTR DISto 2.7mor 9FTand,  
set REAR DISto 2.4mor 8FT.”  
Note:  
If you have selected NONEfor the center and rear speakers setting,  
you cannnot set the speaker distance for the center and rear  
speakers.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Settings  
CONTROL  
DOWN UP  
Crossover frequency  
2 Press CONTROL UP 5/DOWN to  
Small speakers cannot reproduce the bass sounds efficiently. If you  
use a small speaker in any position, this receiver automatically  
reallocates the bass sound elements assigned from small speaker to  
large speakers.  
To use this function properly, set this crossover frequency level  
according to the size of the small speaker connected.  
If you have selected LARGEfor all speakers, this function will  
not take effect.  
select the low frequency effect  
attenuator level.  
Each time you press the button, the setting  
alternates between 0dBand “–10dB.”  
0dB : Normally select this.  
–10dB : Select this when the bass sound is distorted.  
Crossover frequency is not valid for the DVD MULTI playback  
mode and HEADPHONE mode.  
Dynamic range compression  
You can compress the dynamic range (difference between maximum  
sound and minimum sound) of the reproduced sound. This is useful  
when enjoying surround sound at night.  
This function takes effect only when playing back a source  
encoded with Dolby Digital.  
T
SETTING  
1 Press SETTING repeatedly until  
CROSS (Crossover)(with the current  
setting)* appears on the display.  
SPK  
1
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
LS  
S
RS  
1 Press SETTING repeatedly until  
CH-  
T
SETTING  
D. COMP (Dynamic range  
compression)(with the current setting)*  
appears on the display.  
* 100HZis the initial setting. If you have already changed the  
setting, another frequency will be shown.  
2 Press CONTROL UP 5/DOWN to  
SPK  
1
CONTROL  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
DOWN  
UP  
S.WFR LFE  
select the crossover frequency level  
LS  
S
RS  
CH-  
you like to use.  
Each time you press the button, the crossover  
frequency level changes as follows:  
* MIDis the initial setting. If you have already changed the  
setting, another setting will be shown.  
80HZ  
200HZ  
100HZ  
120HZ  
150HZ  
CONTROL  
2 Press CONTROL UP 5/DOWN ∞  
DOWN  
UP  
to select the appropriate compression  
level.  
Each time you press the button, the  
display changes as follows:  
Low frequency effect attenuator  
If the bass sound is distorted while playing back software using  
Dolby Digital or DTS Digital Surround, follow the procedure  
below:  
MID  
OFF  
MAX  
Low frequency effect attenuator is not valid for DVD MULTI  
playback mode.  
This function takes effect only when the subwoofer (LFE) signals  
come in (with SUBWOOFERset to YES).  
OFF : Select this when you want to enjoy surround with its  
full dynamic range. (No effect applied.)  
MID : Select this when you want to reduce the dynamic range  
a little.  
MAX : Select this when you want to apply the compression  
1 Press SETTING repeatedly until LFET  
SETTING  
effect fully. (Useful at night.)  
ATT (Low Frequency Effect  
Attenuator)(with the current  
setting)* appears on the display.  
SPK  
1
L
C
R
DIGITAL AUTO  
DIGITAL  
S.WFR LFE  
LS  
S
RS  
CH-  
* 0dBis the initial setting. If you have already changed the  
setting, “–10dBwill be shown.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustments  
Remote Control  
Front Panel  
Display  
A/V CONTROL RECEIVER  
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
MEMORY  
CATV/DBS  
DVD  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
SPK  
1
2
R
BASS BOOST  
TUNED STEREO AUTO MUTING SLEEP  
VOLUME  
ANALOG  
DIGITAL AUTO  
STANDBY  
CD  
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
S.WFR LFE  
LINEAR PCM  
DIGITAL  
MASTER VOLUME  
LS  
S
RS  
TV/DBS  
TAPE/CDR PHONO  
BASS+/–  
BASS  
BOOST  
STANDBY/ON  
CH-  
BASS  
TREBLE  
+
+
TREBLE+/–  
SURROUND  
ON/OFF  
SURROUND ANALOG/DIGITAL SLEEP  
MODE  
INPUT  
INPUT  
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
BASS BOOST  
ADJUST SETTING  
BASS BOOST EFFECT  
CENTER +  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
1
TEST  
2
3
MENU  
REAR L +  
INPUT ATT  
SOUND  
4
5
6
CONTROL  
DOWN UP  
ENTER  
SPEAKERS ON/OFF  
DIMMER  
MUTING  
REAR R +  
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
7/P  
8
9
SOUND  
SUBWOOFER +  
SOURCE NAME  
10  
RETURN  
0
+10  
SUBWOOFER +/–  
+
100  
FM MODE  
CATV/DBS  
CONTROL  
PHONES  
+
+
+
CH  
TV VOL  
VOLUME  
TV/VIDEO  
+
/REW  
FF/  
TUNING  
REC  
PAUSE  
BASS BOOST  
ADJUST  
INPUT ATT  
CONTROL  
CONTROL  
UP 5/DOWN ∞  
RM-SRX7020J REMOTE CONTROL  
Once each of following settings has been adjusted, this receiver  
memorizes the adjustment for each source.  
Adjusting the Front Speakers  
Output Balance  
Remote  
NOT  
Remote  
Attenuating the Input Signal  
NOT  
If the sounds you hear from the front right and left speakers are  
unequal, you can adjust the speakers output balance.  
When the input level of the analog source is too high, the sounds  
will be distorted. If this happens, you need to attenuate the input  
signal level to prevent the sound distortion.  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
INPUT  
ANALOG / DIGITAL  
ADJUST
1 Press and hold INPUT ATT  
1 Press ADJUST repeatedly until  
INPUT ATT  
(INPUT ANALOG/DIGITAL) so  
BALANCE(with the current  
that the INPUT ATT indicator  
lights up on the display.  
setting)* appears on the display.  
SPK  
1
L
C
R
DIGITAL AUTO  
LINEAR PCM  
SPK  
1
ANALOG  
S.WFR LFE  
L
C
R
INPUT ATT  
LS  
S
RS  
S.WFR LFE  
CH-  
LS  
S
RS  
CH-  
* CNTR (Center)is the initial setting. If you have already  
Each time you press and hold the button, the Input Attenuator  
mode turns on (INPUT ATT ON) or off (INPUT  
NORMAL).  
changed the setting, another setting will be shown.  
CONTROL  
2 Press CONTROL UP 5/DOWN ∞  
DOWN  
UP  
to adjust the balance.  
Note:  
When selecting DVD MULTIas the source, this effect does not work.  
Pressing CONTROL UP 5 decreases the  
left channel output from CNTR(Center)  
to L21.”  
Pressing CONTROL DOWN decreases  
the right channel output from CNTR(Center) to R21.”  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustments  
Adjusting the Tone  
Adjusting the Subwoofer Output Level  
You can adjust the bass and treble sounds as you like.  
You can adjust the subwoofer output level if you have connected a  
subwoofer and set the subwoofer information correctly—“YES.”  
On the front panel:  
Before you start, remember....  
On the front panel:  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
1 Press ADJUST repeatedly until BASS”  
ADJUST
1 Press ADJUST repeatedly until  
ADJUST
or TREBLE(with the current  
“SUBWFR” (with the current setting)*  
appears on the display.  
setting)* appears on the display.  
SPK  
1
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
SPK  
1
LS  
S
RS  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
CH-  
S.WFR LFE  
LS  
S
RS  
CH-  
* 0is the initial setting. If you have already changed the  
setting, another number (level) will be shown.  
* “0” is the initial setting. If you have already changed the  
setting, another number (level) will be shown.  
BASS  
: To adjust the bass.  
CONTROL  
2 Press CONTROL UP 5/DOWN to  
DOWN  
UP  
TREBLE : To adjust the treble.  
adjust the subwoofer output level  
(–10 to +10).  
CONTROL  
DOWN UP  
2 Press CONTROL UP 5/DOWN to  
From the remote control:  
adjust the bass or treble sounds level  
SOUND  
(10 to +10).  
Each time you press the button, the sound  
level changes by 2 steps.  
1 Press SOUND.  
The 10 keys are activated for sound adjustments.  
SUBWOOFER +  
2 Press SUBWOOFER +/– to adjust  
the subwoofer output level (–10 to  
+10).  
0
+10  
100  
From the remote control:  
+
FM MODE  
BASS  
1 Press BASS +/or TREBLE +/to  
+
+
adjust the bass or treble sounds  
Note:  
level (10 to +10).  
Each time you press the button, the sound  
level changes by 2 steps.  
Subwoofer output level cannot be adjusted when using headphones.  
TREBLE  
Reinforcing the Bass  
You can boost the bass level.  
Press BASS BOOST on the front panel or on the  
remote control to select the bass boost function.  
BASS BOOST  
BASS BOOST  
On the front panel  
From the remote control  
• Each time you press the button, the bass boost function turns  
on (“BASSBOOST ON”) and off (“BASSBOOST OFF”).  
Select “BASSBOOST ON” to activate the bass boost function.  
The BASS BOOST indicator lights up on the display.  
Select “BASSBOOST OFF” to cancel it.  
The indicator goes off.  
Note:  
This function affects the front speaker sounds only.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
Front Panel  
Remote Control  
FM/AM  
TUNING  
5/∞  
FM/AM  
PRESET  
5/FM MODE  
A/V CONTROL RECEIVER  
Display  
CATV/DBS  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
DVD  
CD  
FM/AM  
10 keys  
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
TV/DBS  
TAPE/CDR PHONO  
BASS  
TREBLE  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
MEMORY  
+
+
SURROUND  
ON/OFF  
SURROUND ANALOG/DIGITAL SLEEP  
MODE INPUT  
SPK  
1
2
R
BASS BOOST  
TUNED STEREO AUTO MUTING SLEEP  
VOLUME  
ANALOG  
DIGITAL AUTO  
STANDBY  
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
S.WFR LFE  
LINEAR PCM  
DIGITAL  
MASTER VOLUME  
LS  
S
RS  
CENTER +  
BASS BOOST EFFECT  
STANDBY/ON  
CH-  
1
TEST  
2
3
MENU  
REAR L +  
SOUND  
4
5
6
ENTER  
REAR R +  
DIMMER  
MUTING  
7/P  
8
9
INPUT  
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
BASS BOOST  
ADJUST SETTING  
SUBWOOFER +  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
10  
RETURN  
+10  
INPUT ATT  
+
FM MODE  
100  
CATV/DBS  
CONTROL  
FM MODE  
CONTROL  
DOWN UP  
SPEAKERS ON/OFF  
+
+
+
CH  
TV VOL  
VOLUME  
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
TV/VIDEO  
SOURCE NAME  
+
PHONES  
/REW  
FF/  
TUNING  
TUNING +/–  
REC  
PAUSE  
CONTROL  
RM-SRX7020J REMOTE CONTROL  
MEMORY  
FM/AM  
Using Preset Tuning  
Tuning in Stations Manually  
Once a station is assigned to a channel number, the station can be  
quickly tuned. You can preset up to 30 FM and 15 AM stations.  
1 Press FM/AM to select the band FM or AM.  
The last received station of the selected band is tuned in.  
FM/AM  
FM/AM  
To store the preset stations  
Remote  
NOT  
Before you start, remember....  
From the remote control  
On the front panel  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 2 again.  
Each time you press the button, the band alternates between  
FM and AM.  
1 Tune in the station you want to preset  
TUNED STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
ANALOG  
L
C
R
(see Tuning in Stations Manually).  
If you want to store the FM reception mode for this station,  
select the FM reception mode you want. See Selecting the FM  
Reception Modeon page 22.  
S.WFR LFE  
LS  
S
RS  
CH-  
Ex.: When the FM band is selected  
TUNED STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
ANALOG  
L
C
R
2 Press FM/AM TUNING 5/(TUNING +/ on  
S.WFR LFE  
LS  
S
RS  
CH-  
the remote control) repeatedly until you find the  
frequency you want.  
Pressing FM/AM TUNING 5 (TUNING + on the remote  
control) increases the frequency.  
Pressing FM/AM TUNING (TUNING on the remote  
control) decreases the frequency.  
MEMORY  
2 Press MEMORY.  
The CH- indicator lights up and the channel  
number position starts flashing on the display for  
about 5 seconds.  
FM/AM TUNING  
SPK  
1
TUNED STEREO  
AUTO MUTING  
VOLUME  
ANALOG  
L
C
R
S.WFR LFE  
+
LS  
S
RS  
CH-  
TUNING  
FM/AM PRESET  
On the front panel  
From the remote control  
3 Press FM/AM PRESET 5/to  
select a channel number while the  
channel number position is  
flashing.  
Notes:  
When you hold FM/AM TUNING 5/ in step 2, the frequency  
keeps changing until a station is tuned in.  
When a station of sufficient signal strength is tuned in, the TUNED  
indicator lights up on the display.  
TUNED STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
ANALOG  
L
C
R
S.WFR LFE  
LS  
S
RS  
When an FM stereo program is received, the STEREO indicator  
also lights up.  
CH-  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Operations  
MEMORY  
4 Press MEMORY again while the  
selected channel number is flashing  
on the display.  
Selecting the FM Reception Mode  
When an FM stereo broadcast is hard to receive or noisy, you can  
change the FM reception mode while receiving an FM broadcast.  
You can store the FM reception mode for each preset station. (See  
page 21).  
The selected channel number stops flashing.  
The station is assigned to the selected channel number.  
TUNED STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
ANALOG  
L
C
R
S.WFR LFE  
LS  
S
RS  
1 While listening to an FM station, press FM  
CH-  
MODE.  
Each time you press the button, the FM reception mode  
alternates between AUTO*and MONO.”  
5 Repeat steps 1 to 4 until you store all the stations  
you want.  
FM MODE  
SUBWOOFER +  
0
To erase a stored preset station  
FM MODE  
Storing a new station on a used number erases the previously stored  
one.  
On the front panel  
From the remote control  
TUNED STEREO  
AUTO MUTING  
SPK  
1
ANALOG  
To tune in a preset station  
L
C
R
S.WFR LFE  
LS  
S
RS  
On the front panel:  
CH-  
1 Press FM/AM to select the band  
FM/AM  
FM or AM.  
The last received station of the selected band is  
tuned in.  
TUNED  
SPK  
1
R
ANALOG  
L
C
S.WFR LFE  
LS  
S
RS  
Each time you press the button, the band  
alternates between FM and AM.  
CH-  
* AUTOis the initial setting.  
AUTO : Normally select this.  
SPK  
1
TUNED STEREO  
AUTO MUTING  
VOLUME  
ANALOG  
L
C
R
S.WFR LFE  
LS  
S
RS  
CH-  
When a program is broadcasted in stereo, you will  
hear stereo sound; when in monaural, you will  
hear monaural sounds. This mode is also useful to  
suppress static noise between stations. The AUTO  
MUTING indicator lights up on the display.  
FM/AM PRESET  
2 Press FM/AM PRESET 5/∞  
repeatedly until you find the channel  
you want.  
Pressing FM/AM PRESET 5 increases the  
channel numbers.  
Pressing FM/AM PRESET decreases  
the channel numbers.  
MONO  
: Select this to improve the reception (but stereo  
effect will be lost).  
In this mode, you will hear noise while tuning into  
the stations. The AUTO MUTING indicator goes  
off from the display. (The STEREO indicator also  
goes off.)  
From the remote control:  
FM/AM  
1 Press FM/AM to select the band  
FM or AM.  
The last received station of the selected band is  
tuned in and the10 keys now work for tuner operation.  
Each time you press the button, the band  
alternates between FM and AM.  
2 Press 10 keys to select a preset  
CENTER +  
EFFECT  
1
TEST  
2
3
MENU  
channel number.  
REAR L +  
4
5
6
For channel number 5, press 5.  
For channel number 15, press +10 then 5.  
For channel number 20, press +10 then 10.  
For channel number 30, press +10, +10,  
ENTER  
REAR R +  
7/P  
8
9
SUBWOOFER +  
10  
RETURN  
0
+10  
+
100  
FM MODE  
then 10.  
Note:  
When you use 10 keys on the remote control, be sure that they are  
activated for the tuner, not for the CD and others. (See page 34).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating Realistic Sound Fields  
You can use the following Surround modes to reproduce a realistic  
sound field:  
Dolby Digital*  
Used to reproduce multichannel sound tracks of the software  
encoded with Dolby Digital ( ).  
To enjoy the software encoded with Dolby Digital, connect the  
source component using the digital terminal on the rear of this  
receiver. (See page 9.)  
I Dolby Surround  
• Dolby Pro Logic II  
• Dolby Digital  
I DTS Digital Surround  
I DAP modes  
D
I
G
I
T
A
L
I All Channel Stereo  
Dolby Digital 5.1 ch encoding method (so-called discrete  
multichannel digital audio format) records and digitally compresses  
the left front channel, right front channel, center channel, left rear  
channel, right rear channel, and LFE channel signals.  
Since each channel is completely independent from the other  
channel signals to avoid interference, you can obtain much better  
sound quality with much stereo and surround effects.  
I Dolby Surround  
Dolby Pro Logic II*  
Dolby Pro Logic II has a newly developed multichannel playback  
format to decode all 2 channel sources—regular stereo source and  
Dolby Surround encoded source—into 5.1 channel.  
Matrix-based encoding/decoding method for Dolby Pro Logic II  
makes no limitation for the cutoff frequency of the rear treble and  
enables stereo rear sound compared to conventional Dolby Pro  
Logic.  
Note:  
Dolby Digital software can be roughly grouped into two categories  
multichannel (up to 5.1ch) and 2 channel software. To enjoy  
surround sounds while playing Dolby Digital 2 ch software, you can  
use Dolby Pro Logic II.  
Dolby Pro Logic II enables to reproduce spacious sound from  
original sound without adding any new sounds and tonal colorations.  
Dolby Pro Logic II has two modes—Movie mode and Music mode:  
I DTS Digital Surround**  
Used to reproduce multichannel sound tracks of the software  
encoded with DTS Digital Surround (  
).  
Pro Logic II Movie (PL II MOVIE)—suitable for reproduction of  
To enjoy the software encoded with DTS Digital Surround,  
connect the source component using the digital terminal on the  
rear of this receiver. (See page 9.)  
DOLBY SURROUND  
Dolby Surround encoded sources bearing the mark  
.
You can enjoy soundfield very close to the one created with discrete  
5.1 channel sounds.  
Pro Logic II Music (PL II MUSIC)suitable for reproduction of  
any 2 channel stereo music sources. You can enjoy wide and deep  
sound by using this mode. For this mode, Panorama control can be  
selected, which gives wraparoundsound effect with side-wall  
image.  
DTS Digital Surround is another discrete multichannel digital  
audio format available on CD, LD, and DVD software.  
Compared to Dolby Digital, audio compression ratio is relatively  
low. This fact allows DTS Digital Surround format to add breadth  
and depth to the reproduced sounds. As a result, DTS Digital  
Surround features natural, solid and clear sound.  
When Dolby Pro Logic II is activated,  
PRO LOGIC II  
indicator lights up on the display.  
Typical Multichannel (5.1 ch) reproduction  
Center  
speaker  
Right front  
speaker  
Left front  
speaker  
Subwoofer  
STANB
S
T
A
N
D
B
Y
O
N
DOLBY  
D
I
G
I
T
A
L
R
X
-
7
0
2
0
V
A
U
D
I
O
/
V
I
D
E
O
C
O
N
T
R
O
L
R
E
C
E
I
V
E
R
F
M
/
A
M
T
U
N
I
N
G
F
M
/
A
M
P
R
E
S
E
T
FM MODE  
MEMORY  
COMPULINK  
Remote  
STANDBY  
M
A
S
T
E
R
V
O
L
U
M
E
D
S
I
G
I
T
A
L
U
R
R
O
U
N
D
SURROUND ON/OFF  
SURROUND MODE  
INPUT  
ANALOG/DIGITAL  
B
A
S
S
B
O
O
S
T
A
D
J
U
S
T
S
E
T
T
I
N
G
D
V
D
M
U
L
T
I
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
I
N
P
U
T
A
T
T
CONTROL  
DOWN UP  
S
P
E
A
K
E
R
S
O
N
/
O
F
F
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
S
O
U
R
C
E
N
A
M
E
PHONES  
Left rear  
speaker  
Right rear  
speaker  
* Manufactured under license from Dolby Laboratories. “Dolby,” Pro  
Logic,and the double-D symbol are trademarks of Dolby  
Laboratories. Confidential unpublished works. ©1992–1997 Dolby  
Laboratories, Inc. All rights reserved.  
**Manufactured underlicense from Digital Theater Systems, Inc. US  
PAT. No. 5,451,942 and other world-wide patents issued and  
pending. “DTS” and “DTS Digital Surround” are trademarks of  
Digital Theater Systems, Inc. Copyright 1996 Digital Theater  
Systems, Inc. All rights reserved.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating Realistic Sound Fields  
I DAP (Digital Acoustic Processor) modes  
I All Channel Stereo  
DAP modes have been designed to create important acoustic  
surround elements.  
This mode can reproduce a larger stereo sound field using all the  
connected (and activated) speakers.  
The sound heard in a live club, dance club, hall or pavilion consists  
of direct sound and indirect soundearly reflections and reflections  
from behind. Direct sounds reach the listener directly without any  
reflection. On the other hand, indirect sounds are delayed by the  
distances of the ceiling and walls (see the diagram below).  
These indirect sounds are important elements of the acoustic  
surround effects. The DAP mode can reproduce a realistic sound  
field by adding these indirect sounds.  
All Channel Stereo can be used when the front and rear  
speakers are connected to this receiver without respect to the  
center speaker connection.  
If the center speaker is connected and activated, the same phase of  
the front left and right signals are output through the center speaker.  
All Channel Stereo can be used while reproducing 2 channel stereo  
software, either analog or digital except Dolby Digital and DTS  
Digital Surround.  
DAP modes can be used when the front and rear speakers are  
connected to this receiver (without respect to the center speaker  
connection: no sound comes out of the center speaker even if it is  
connected).  
When All Channel Stereo is selected, the DSP indicator lights up  
on the display.  
All Channel Stereo reproduction  
The following DAP modes are provided with this receiver:  
LIVE CLUB  
: Gives the feeling of a live music club with a low  
ceiling.  
DANCE CLUB : Gives a throbbing bass beat.  
HALL  
: Gives clear vocal and the feeling of a concert  
hall.  
PAVILION  
: Gives the spacious feeling of a pavilion with a  
high ceiling.  
These DAP modes can be used to add the acoustic surround effects  
while reproducing 2 channel stereo softwareeither analog or  
digital except Dolby Digital and DTS Digital Surroundand can  
give you a real being therefeeling.  
When one of the DAP modes is selected, the DSP indicator lights  
up on the display.  
Sound reproduced from All Channel Stereo  
DVD MULTI Playback Mode  
Creating sound field  
This receiver provides the DVD MULTI playback mode for  
reproducing the analog discrete 5.1 channel output mode of the  
DVD player or other equipment.  
You can adjust speaker output levels while playing back a video  
software such as a DVD using the analog discrete 5.1 channel  
output mode.  
Reflections from behind  
Early reflections  
For connecting analog discrete output jacks, see page 8.  
For details on the DVD MULTI playback mode, see page 30.  
Note:  
When you select DVD MULTIas the source to play, Surround mode  
is canceled, and the SURROUND ON/OFF and SURROUND MODE  
buttons do not work.  
Direct sounds  
:Possible/
ן
:Impossible  
Available Surround modes for each input signal  
Mode SURROUND DOLBY  
DTS  
PLII  
PLII  
MUSIC  
LIVE  
CLUB  
DANCE  
CLUB  
ALL CH  
STEREO  
HALL  
ן
PAVILION  
Signals  
OFF (stereo) DIGITAL SURROUND MOVIE  
Dolby Digital  
(Multichannel)  
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
Dolby Digital  
(2 channel)  
ן
ן
DTS Digital  
Surround  
(Multichannel)  
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
ן
DTS Digital  
Surround  
ן
(2 channel)  
Linear PCM  
Analog  
ן
ן
ן
ן
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Relations between Speaker Layouts and Surround Modes  
Available Surround modes will vary depending on how many speakers are used with this receiver.  
Make sure that you have set the speaker information correctly (see pages 16 to 18).  
If only front speakers are connected, you cannot use Surround modes.  
If rear speakers are not connected, you cannot use DAP modes and All Channel Stereo.  
Speaker Layouts  
Available Surround modes  
When the center and rear speakers  
are connected (5 channels):  
Turning on or off the Surround modes  
Each time you press SURROUND ON/OFF, Surround modes turn on or off.  
TV  
Front  
speaker  
Front  
speaker  
SPK  
1
TUNED  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
STEREO  
AUTO MUTING  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
LS RS  
SURROUND ON/OFF  
SURROUND  
ON/OFF  
S
Center speaker  
Last selected  
Surround mode  
(Front panel)  
(Remote)  
SURROUND OFF  
Ex.: PL II MUSIChas been selected.  
Rear  
Rear  
speaker  
speaker  
Selecting the Surround modes  
Each time you press SURROUND MODE, Surround modes change as follows:  
STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
TUNED  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
LS RS  
SURROUND  
MODE  
S
SURROUND MODE  
When the rear speakers are connected  
(4 channels):  
PL II MOVIE  
PL II MUSIC  
DANCE CLUB  
(Remote) (Front panel)  
TV  
LIVE CLUB  
HALL  
Front  
Front  
PAVILION  
speaker  
speaker  
(Back to the beginning)  
ALL CH STEREO  
Note:  
When the digital multichannel software such as Dolby Digital or DTS Digital  
Surround is played back, the appropriate multichannel Surround mode is activated  
(DOLBY DIGITALor DTS SURROUND) by pressing SURROUND ON/OFF (with  
the digital input mode selected).  
For Dolby Digital 2 ch software, you need to select PLII MUSICor PLII MOVIE”  
by pressing SURROUND MODE.  
Rear  
speaker  
Rear  
speaker  
For more details, see the table on page 24.  
Turning on or off the Surround modes  
When the center speaker is connected  
(3 channels):  
Each time you press SURROUND ON/OFF, the Surround modes turn on or off.  
SPK  
1
TUNED  
STEREO  
AUTO MUTING  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
S.WFR LFE  
LS RS  
S
SURROUND ON/OFF  
SURROUND  
ON/OFF  
TV  
Front  
Front  
speaker  
speaker  
PL II MOVIE  
or  
PL II MUSIC  
Center speaker  
SURROUND OFF  
(Front panel)  
(Remote)  
Ex.: PL II MUSIChas been selected.  
Selecting the Surround modes  
Each time you press SURROUND MODE, Surround modes change as follows:  
SPK  
1
TUNED  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
STEREO  
AUTO MUTING  
SURROUND  
MODE  
SURROUND MODE  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
LS RS  
S
(Remote) (Front panel)  
PL II MOVIE  
PL II MUSIC  
Note:  
When the digital multichannel software such as Dolby Digital or DTS Digital  
Surround is played back, the appropriate multichannel Surround mode is activated  
(DOLBY DIGITALor DTS SURROUND) by pressing SURROUND ON/OFF (with  
the digital input mode selected).  
For Dolby Digital 2 ch software, you need to select PLII MUSICor PLII MOVIE”  
by pressing SURROUND MODE.  
For more details, see the table on page 24.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating Realistic Sound Fields  
Before you start, remember....  
Make sure that you have set the speaker information correctly (see pages 16 to 18).  
You cannot adjust the center speaker output level when you have set CNTR SPto NONE.”  
You cannot adjust the rear speaker output levels when you have set REAR SPto NONE.”  
Remember not to change the speaker setting while using any Surround modes; otherwise, it may be canceled when you deactivate the  
speakers required for the Surround mode.  
Front Panel  
Display  
RX-7020V AUDIO/VIDEO CONTROL RECEIVER  
FM/AM TUNING  
FM/AM PRESET  
FM MODE  
MEMORY  
SPK  
1
2
R
BASS BOOST  
TUNED STEREO AUTO MUTING SLEEP  
VOLUME  
ANALOG  
DIGITAL AUTO  
STANDBY  
L
C
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
S.WFR LFE  
LINEAR PCM  
DIGITAL  
MASTER VOLUME  
LS  
S
RS  
STANDBY/ON  
CH-  
INPUT  
SURROUND ON/OFF  
SURROUND MODE  
ANALOG/DIGITAL  
BASS BOOST  
ADJUST SETTING  
DVD MULTI  
DVD  
VCR  
TV SOUND/DBS  
SOURCE NAME  
INPUT ATT  
CONTROL  
DOWN UP  
SPEAKERS ON/OFF  
1
2
CD  
TAPE/CDR  
PHONO  
FM/AM  
SOURCE NAME  
PHONES  
SURROUND SURROUND  
ADJUST  
CONTROL  
UP 5/DOWN ∞  
ON/OFF  
MODE  
Using Dolby Pro Logic II, Dolby Digital  
and DTS Digital Surround  
Remote Control  
Once you have adjusted the Surround modes, the adjustment is  
memorized for each source.  
When playing back digital multichannel software (Dolby Digital  
5.1 ch or DTS Digital Surround), the SURROUND MODE button  
does not work.  
A/V CONTROL RECEIVER  
From the remote control:  
CATV/DBS  
DVD  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
It will be convenient for you to use the remote control for  
adjustments, since you can make adjustments from your listening  
point, by using the test signal.  
For selecting Panorama mode for Pro Logic II Music, use the  
button on the front panel.  
CD  
TV/DBS  
TAPE/CDR PHONO  
SURROUND  
MODE  
BASS  
TREBLE  
SURROUND  
ON/OFF  
+
+
SURROUND SURROUND ANALOG/DIGITAL SLEEP  
ON/OFF  
MODE  
INPUT  
CENTER +/–  
REARL +/–  
CENTER +  
BASS BOOST EFFECT  
1
TEST  
2
3
EFFECT  
SOUND  
TEST  
MENU  
REAR L +  
SOUND  
1 Setting the analog or digital input mode for the  
4
5
6
ENTER  
DIMMER  
MUTING  
REAR R +  
source you like to listen and start playing.  
7/P  
8
9
SUBWOOFER +  
REARR +/–  
When playing back software encoded with Dolby Digital and DTS  
Digital Surround, select the digital input mode (see page 15).  
10  
RETURN  
0
+10  
+
100  
FM MODE  
CATV/DBS  
CONTROL  
+
+
+
CH  
TV VOL  
VOLUME  
TV/VIDEO  
2 Press SURROUND ON/OFF to  
SURROUND  
ON/OFF  
activate Surround mode.  
+
/REW  
FF/  
TUNING  
Each time you press the button, Surround mode  
turns on and off alternately.  
REC  
PAUSE  
If you are playing back software encoded with Dolby Digital  
multichannel, DOLBY DIGITALis selected.  
If you are playing back software encoded with DTS Digital  
Surround, DTS SURROUNDis selected.  
CONTROL  
RM-SRX7020J REMOTE CONTROL  
If you are playing back any software other  
than above, you can select PL II MUSICor  
SURROUND  
MODE  
PL II MOVIEaccording to the source by  
pressing SURROUND MODE. ( PRO  
LOGIC II indicator lights up on the display.)  
If you like to adjust sound, go to step 3.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND  
On the front panel:  
3 Press SOUND.  
You can also use the buttons on the front panel to adjust the  
Surround modes. However, no test tone is available when using the  
buttons on the front panel. So make adjustments while listening to  
the sound of the source played back.  
The 10 keys are activated for sound adjustments.  
TEST  
4 Press TEST to check if you can hear  
4
the sounds through all the speakers at  
1 Setting the analog or digital input mode for the  
the equal level.  
source you like to hear and start playing.  
TEST TONE Lstarts flashing on the  
display, and a test tone comes out of the  
speakers in the following order:  
When playing back software encoded with Dolby Digital and DTS  
Digital Surround, select the digital input mode (see page 15).  
TEST TONE R  
TEST TONE L  
TEST TONE C  
(Center speaker)  
(Right front speaker)  
(Left front speaker)  
SURROUND ON/OFF  
2 Press SURROUND ON/OFF to  
activate Surround mode.  
TEST TONE LS  
(Left rear speaker)  
TEST TONE RS  
(Right rear speaker)  
Each time you press the button, Surround  
mode turns on and off alternately.  
Notes:  
If you are playing back software encoded with Dolby Digital  
multichannel, DOLBY DIGITALis selected.  
If you are playing back software encoded with DTS Digital  
Surround, DTS SURROUNDis selected.  
You can adjust the speaker output levels without outputting the  
test tone.  
No test tone comes out of the center speaker when CNTR SP”  
is set to NONE.”  
No test tone comes out of the rear speakers when REAR SP”  
is set to NONE.”  
If you are playing back any software other  
SURROUND MODE  
than above, you can select PL II MUSIC”  
or PL II MOVIEaccording to the source  
by pressing SURROUND MODE. ( PRO  
LOGIC II indicator lights up on the display.)  
5 Adjust the speaker output levels (10 to +10).  
Adjust the center speaker and rear speakers levels comparing to  
the sound from the front speakers.  
If you like to adjust sound, go to step 3.  
3 Adjust the speaker output levels.  
CENTER +  
To adjust the center speaker level, press  
CENTER +/.  
2
3
MENU  
ADJUST
1) Press ADJUST repeatedly until one  
of the following indications (with the  
current setting)* appears on the  
display.  
REAR L +  
To adjust the left rear speaker level, press  
REARL +/.  
5
6
ENTER  
STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
TUNED  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
L
C
R
DIGITAL AUTO  
LINEAR PCM  
ENTER  
REAR R +  
S.WFR LFE  
LS RS  
S
To adjust the right rear speaker level, press  
REARR +/.  
8
9
* 0is the initial setting. If you have already changed the  
setting, another number (level) will be shown.  
TEST  
4
6 Press TEST again to stop the test  
CENTER : To adjust the center speaker output level  
(10 to +10).  
tone.  
REAR L : To adjust the left rear speaker output level  
(10 to +10).  
REAR R : To adjust the right rear speaker output level  
(10 to +10).  
CONTROL  
2) Press CONTROL UP 5/  
DOWN  
UP  
DOWN to adjust the selected  
speaker output levels.  
3) Repeat steps 1) and 2) to adjust the other  
speaker levels.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating Realistic Sound Fields  
When you select PL II MUSIC,you can go to the  
following adjustment.  
Using DAP Modes and All Channel Stereo  
Once you have adjusted the DAP modes and All Channel Stereo, the  
adjustment is memorized for each source.  
You cannot use the DAP modes and All Channel Stereo if no rear  
speakers are connected.  
Remote  
NOT  
4 Turn on Panorama control on or off.  
ADJUST
You cannot adjust the effect level for ALL CH STEREO.”  
1) Press ADJUST repeatedly until  
PANORAMA(with the current  
From the remote control:  
setting)* appears on the display.  
It will be convenient for you to use the remote control for  
adjustments, since you can make adjustments from your listening  
point.  
TUNED  
PRO LOGIC ΙΙ DSP H.PHONE INPUT ATT  
STEREO  
AUTO MUTING  
VOLUME  
SPK  
1
L
C
R
DIGITAL AUTO  
LINEAR PCM  
S.WFR LFE  
LS RS  
S
1 Start playing 2 channel softwareeither analog  
or Linear PCMand select the source.  
* OFFis the initial setting. If you have already changed  
the setting, ONwill be shown.  
SURROUND  
2 Press SURROUND ON/OFF to activate  
ON/OFF  
Surround mode.  
2) Press CONTROL UP 5/  
DOWN to turn on or off  
CONTROL  
DOWN UP  
When the Surround mode turns on, the last selected  
Surround mode will be activated.  
Each time you press the button, Surround mode turns on and  
off alternately.  
Panorama control.  
Each time you press the button, ON”  
and OFFchange alternately.  
SURROUND  
3 Press SURROUND MODE repeatedly  
MODE  
ON  
: Select this when you like to enjoy  
until one of the DAP modes—“LIVE  
CLUB,” “DANCE CLUB,” “HALL”  
and PAVILION”—or ALL CH  
STEREOappears on the display.  
The DSP indicator also lights up on the display.  
wraparoundsound effect with side-wall  
image.  
OFF  
: Select this when you like to enjoy  
originally recorded sounds.  
If you like to adjust sound, go to step 4.  
SOUND  
4 Press SOUND.  
To cancel Surround mode  
Press SURROUND ON/OFF again so that SURROUND OFF”  
The 10 keys are activated for sound adjustments.  
appears on the display.  
5 Adjust the speakers output levels  
If Surround mode is canceled while playing back multichannel  
digital software, all channel signals are mixed and output through  
the front speakers (and subwoofer if you have connected a  
subwoofer and set the subwoofer setting correctly—“YES).  
(10 to +10).  
REAR L +  
To adjust the left rear speaker level, press  
REARL +/.  
5
6
ENTER  
ENTER  
REAR R +  
To adjust the right rear speaker level, press  
REARR +/.  
8
9
CENTER +  
For ALL CH STEREOonly:  
To adjust the center speaker level, press  
CENTER +/.  
2
3
MENU  
6 For DAP modes only:  
EFFECT  
Press EFFECT to select the effect  
1
level (1 to 5) you want.  
Each time you press the button, the effect  
level changes as follows:  
EFFECT 2  
EFFECT 3  
EFFECT 4  
EFFECT 1  
EFFECT 5  
As the number increases, selected mode becomes stronger  
(normally set it to EFFECT 3).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On the front panel:  
5 Only for DAP modes: Adjust the effect level.  
ADJUST G  
1) Press ADJUST repeatedly until  
EFFECT(with the current  
1 Start playing 2 channel softwareeither analog  
or Linear PCMand select the source.  
setting)* appears on the display.  
* EFFECT 3is the initial setting. If you have already  
changed the setting, another setting will be shown.  
SURROUND ON/OFF  
2 Press SURROUND ON/OFF to  
activate Surround mode.  
When Surround mode turns on, the last selected  
Surround mode will be activated.  
Each time you press the button, Surround mode  
turns on and off alternately.  
CONTROL  
2) Press CONTROL UP 5/  
DOWN  
UP  
DOWN to select the effect  
level (1 to 5) you want.  
Each time you press the button, the effect  
level changes as follows:  
SURROUND MODE  
3 Press SURROUND MODE repeatedly  
until one of the DAP modes—“LIVE  
CLUB,” “DANCE CLUB,” “HALL”  
and PAVILION”—or ALL CH STEREO”  
appears on the display.  
EFFECT 2  
EFFECT 3  
EFFECT 4  
EFFECT 1  
EFFECT 5  
As the number increases, selected mode becomes stronger  
(normally set it to EFFECT 3).  
The DSP indicator also lights up on the display.  
If you like to adjust sound, go to step 4.  
4 Adjust the speaker output levels.  
To cancel DAP modes and All Channel Stereo  
Press SURROUND ON/OFF again so that SURROUND OFF”  
appears on the display. The DSP indicator goes off.  
1) Press ADJUST repeatedly until one  
ADJUST
of the following indications (with  
the current setting)* appears on the  
display.  
REAR L : To adjust the left rear speaker output level  
(10 to +10).  
REAR R : To adjust the right rear speaker output level  
(10 to +10).  
CENTER : For ALL CH STEREOonlyto adjust the  
center speaker output level  
(10 to +10).  
*0is the initial setting. If you have already changed the  
setting, another number (level) will be shown.  
CONTROL  
DOWN  
UP  
2) Press CONTROL UP 5/  
DOWN to adjust the selected  
speaker output levels.  
3) Repeat steps 1) and 2) to adjust the other  
speaker levels.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using DVD MULTI Playback Mode  
This receiver provides the DVD MULTI playback mode for  
reproducing the analog discrete output mode of the DVD player.  
Before playing back a DVD, refer also to the manual supplied with  
the DVD player.  
From the remote control:  
DVD MULTI  
1 Press DVD MULTI.  
Note:  
When you select DVD MULTIas the source to play, Surround  
mode is canceled, and the SURROUND ON/OFF and  
SURROUND MODE buttons do not work.  
Activating DVD MULTI Playback Mode  
2 Select the analog discrete output mode on the  
DVD player, and start playing a DVD.  
You can adjust the DVD MULTI playback mode while playing back  
a DVD using the analog discrete output mode on the DVD player.  
Once you have made adjustments, the receiver memorizes the  
adjustments until you change them.  
You also need to set the DVD player to the analog discrete output  
mode.  
Refer also to the manual supplied with the DVD player.  
If you need to make any adjustments, go to the  
following steps.  
Before you start, remember....  
There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
SOUND  
3 Press SOUND.  
The 10 keys are activated for adjusting the sound.  
4 Adjust the speaker output levels.  
On the front panel:  
CENTER +  
DVD MULTI  
1 Press DVD MULTI.  
2
3
To adjust the center speaker level, press  
CENTER +/(10 to +10).  
MENU  
Notes:  
When you select DVD MULTIas the source to play, the  
Surround mode is canceled, and the SURROUND ON/OFF and  
SURROUND MODE buttons do not work.  
If you select the source to DVD MULTI while using both the  
speakers connected to the FRONT SPEAKERS 1 and 2  
terminals, the speakers connected to the FRONT SPEAKERS  
2 terminals are deactivated.  
When selecting DVD MULTIas the source, you can only  
select either the speakers connected to the FRONT  
SPEAKERS 1 or 2 terminals.  
REAR L +  
To adjust the left rear speaker level, press  
REARL +/(10 to +10).  
5
6
ENTER  
ENTER  
REAR R +  
To adjust the right rear speaker level, press  
REARR +/(10 to +10).  
8
9
2 Select the analog discrete output mode on the  
DVD player, and start playing a DVD.  
Refer also to the manual supplied with the DVD player.  
If you need to make any adjustments, go to the  
following steps.  
3 Adjust the speaker output levels.  
ADJUST
1) Press ADJUST repeatedly until one  
of the following indications appears  
on the display:  
CENTER :To adjust the center speaker output level  
(10 dB to +10 dB).  
REAR L : To adjust the left rear speaker output level  
(10 dB to +10 dB).  
REAR R : To adjust the right rear speaker output level  
(10 dB to +10 dB).  
2) Press CONTROL UP 5/DOWN ∞  
to adjust the selected speaker  
output levels.  
CONTROL  
DOWN UP  
3) Repeat steps 1) and 2) to adjust the other  
speaker output levels.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPU LINK Remote Control System  
The COMPU LINK remote control system allows you to operate  
JVCs audio components through the remote sensor on the receiver.  
To use this remote control system, you need to connect JVCs audio  
components through the COMPU LINK-4 (SYNCHRO) jacks (see  
below) in addition to the connections using cables with RCA pin  
plugs (see page 7).  
Make sure that the AC power cords of these components are  
unplugged before connection. Plug the AC power cords only after  
all connections are completed.  
Automatic Power On/Off (Standby): only possible with the  
COMPU LINK-3 and COMPU LINK-4  
Both the CD player and cassette deck (or CD recorder) turn on and  
off (standby) along with the receiver.  
When you turn on the receiver, the CD player or cassette deck (or  
CD recorder) will turn on automatically, depending on which  
component has been previously selected.  
When you turn off the receiver, both the CD player and cassette  
deck (or CD recorder) will turn off (standby).  
Synchronized Recording  
Synchronized recording means the cassette deck starts recording as  
soon as a CD begins playing.  
CD player  
Cassette deck  
or  
To use synchronized recording, follow these steps:  
CD recorder  
1 Put a tape in the cassette deck and a disc in the  
CD player.  
COMPU LINK-4  
(SYNCHRO)  
2 Press the record () button and the pause (8)  
button on the cassette deck at the same time.  
This puts the cassette deck into recording pause.  
If you do not press the record () button and pause (8) button at  
the same time, the synchronized recording feature will not  
operate.  
Turntable  
3 Press the play (3) button on the CD player.  
The source changes on the receiver, and as soon as play starts,  
the cassette deck starts recording. When the play ends, the  
cassette deck enters recording pause, and stops about 4 seconds  
later.  
Notes:  
There are four versions of COMPU LINK remote control system.  
This receiver is equipped with the fourth versionCOMPU LINK-4.  
This version is added systematic operations with the CD recorder to  
the previous versionCOMPU LINK-3.  
If your audio component has two COMPU LINK jacks, you can use  
either one. If it has only one COMPU LINK jack, connect it so that it  
is the last item in the series of components.  
To operate the cassette deck or CD recorder using the COMPU  
LINK remote control system, set the source name correctly.  
(See page 11.)  
Notes:  
During synchronized recording, the selected source cannot be  
changed.  
If the power of any component is shut off during synchronized  
recording, the COMPU LINK remote control system may not  
operate properly. In this case, you must start again from the  
beginning.  
Refer also to the manuals supplied with your audio components.  
This remote control system allows you to use four functions listed  
below.  
Remote Control through the Remote Sensor on the Receiver  
You can control the connected audio components through the remote  
sensor on the receiver using this remote control. Aim the remote  
control directly at the remote sensor on the receiver. For details, see  
pages 34 and 35.  
Automatic Source Selection  
When you press the play (3) button on a connected component or  
on its own remote control, the receiver automatically turns on and  
changes the source to the component. On the other hand, if you  
select a new source on the receiver or on the remote control, the  
selected component begins playing immediately.  
In both cases, the previously selected source continues playing  
without sound for a few seconds.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AV COMPU LINK Remote Control System  
The AV COMPU LINK remote control system allows you to operate JVCs video components (TV, VCR, and DVD player) through the  
receiver.  
This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVCs video components through the video  
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the  
diagrams below and the procedure on the next page.  
CONNECTIONS 1: AV COMPU LINK Connection  
TV  
VCR  
DVD player  
VHS  
DVD  
AV  
COMPU LINK III  
Note:  
AV  
COMPU LINK  
You can only connect to the TV  
with the AV COMPU LINK EX or  
AV COMPU LINK III terminal.  
The TV with AV COMPU LINK  
RECEIVER/AMP terminal will  
not be used.  
AV  
AV  
COMPU LINK  
COMPU LINK EX  
AV  
COMPU LINK III  
IMPORTANT:  
The AV COMPU LINK remote control system cannot control the DBS tuner  
connected to the TV SOUND/DBS and DBS component video terminals.  
Notes:  
When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic  
Selection of TVs Input Mode (see page 33).  
When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.  
Make sure that the remote control code of the VCR connected to the VCR jacks is set to code A.”  
Refer also to the manuals supplied with your video components.  
CONNECTIONS 2: Video Cable Connections  
This receiver is equipped with three types of video terminals S-video, composite video, and component video, and the signals coming into  
this receiver through one type of video terminal can output only through the same type of the terminal. So you need to connect the VCR and/  
or DVD player to the TV using one of the following three ways:  
CASE 1  
When connecting the source equipment to the receiver using the S-video terminals, connect also this  
receiver to the TVs Video Input 1 terminal using S-video cables.  
Source  
Equipment  
RX-7020VBK  
TV  
S-video cable  
S-video cable  
To Video Input 1  
Note:  
If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input  
terminal setting to S/C(see page 16).  
CASE 2  
When connecting the source equipment to the receiver using the composite video terminals, connect also  
this receiver to the TVs Video Input 2 terminal (composite video input) using composite video cables.  
Source  
Equipment  
RX-7020VBK  
TV  
Composite  
video cable  
Composite  
video cable  
To Video Input 2  
(Composite)  
Note:  
If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video  
input terminal setting to S/C(see page 16).  
CASE 3  
When connecting the source equipment to the receiver using the component video terminals, connect also  
this receiver to the TVs Video Input 2 terminals (component video input) using component video cables.  
Source  
Equipment  
RX-7020VBK  
TV  
Component  
video cable  
Component  
video cable  
To Video Input 2  
(Component)  
Note:  
If you connect the DVD player and the DBS tuner to this receiver using the component video terminals, change the  
video input terminal setting to COMPONENT(see page 16).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
One-Touch DVD Play  
1. If you have already plugged your VCR, DVD  
player, TV and this receiver into the AC outlets,  
unplug their AC power cords first.  
Simply by starting playback on the DVD player, you can enjoy the  
DVD playback without setting other switches manually.  
When the DVD player is connected through the analog input jacks  
on this receiver (and analog input is selected), the receiver  
automatically turns on and changes the source to DVDor  
DVD MULTI.”  
When the DVD player is connected through the digital input  
terminal on this receiver (and digital input is selected), the  
receiver automatically turns on and changes the source to DVD  
DIGITAL.”  
2. Connect your VCR, DVD player, TV and this  
receiver as follows, using the cables with the  
monaural mini-plugs (not supplied).  
See CONNECTIONS 1on the previous page.  
3. Connect the audio input/output jacks on VCR,  
DVD player, TV and this receiver, using the  
cables with RCA pin plugs.  
The TV automatically turns on and changes the input mode to the  
appropriate position so that you can view the playback picture.  
See pages 7 and 8.  
Automatic Selection of TVs Input Mode  
When you select TVas the source to play on the receiver, the  
TV automatically changes the input mode to the TV tuner so that  
you can watch TV.  
When you select DVD,” “DVD MULTI,” “VCRor DBSas  
the source to play on the receiver, the TV automatically changes  
the input mode to the appropriate position (either Video Input 1 or  
Video Input 2) so that you can view the playback picture.  
4. Connect the video input/output jacks on VCR,  
DVD player, TV and this receiver, using the  
cables with RCA pin plugs, with S-video plug or  
with component video plugs.  
See CONNECTIONS 2on the previous page.  
5. Plug the AC power cords of the components into  
the AC outlets.  
Note:  
When connecting a TV with the AV COMPU LINK EX terminal to this  
receiver, you cannot use a component video cable (as case 3 on page  
32). Connect the TV using a S-video or composite video cable  
(as cases 1 and 2).  
6. When turning on the TV for the first time after  
the AV COMPU LINK connection, turn the TV  
volume to the minimum using the TV volume  
control on the TV.  
Automatic Power On/Off  
The TV, VCR, and DVD player turn on and off along with the  
receiver.  
When you turn on the receiver;  
If the previously selected source is VCR,the TV and VCR will  
turn on automatically.  
7. Turn on the other connected components first,  
then turn on this receiver.  
When turning on the VCR, use the remote control supplied  
with this receiver (press VCR  
).  
If the previously selected source is TV SOUNDor DBS,only  
the TV will turn on automatically.  
The AV COMPU LINK remote control system allows you to use the  
five basic functions listed below.  
If the previously selected source is DVDor DVD MULTI,the  
TV and DVD player will turn on automatically.  
When you turn off the receiver, the TV, VCR and DVD player will  
turn off.  
Remote Control of the TV, DVD player, and VCR Using This  
Remote Control  
See page 36 for details.  
Aim the remote control directly at the remote sensor on each  
target component.  
Note:  
If you turn off the receiver while recording on the VCR, the VCR will  
not turn off, but continue recording.  
One-Touch Video Play  
Simply by inserting a video cassette without its safety tab into the  
VCR, you can enjoy the video playback without setting other  
switches manually. The receiver automatically turns on and changes  
the source to VCR.”  
The TV automatically turns on and changes the input mode to the  
position so that you can view the playback picture.  
When you insert a video cassette with its safety tab, press the play  
(3) button on the VCR or on the remote control. So, you can get the  
same result.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating JVCs Audio/Video Components  
You can use the remote control to operate other JVCs  
IMPORTANT:  
components.  
To operate JVCs audio components using this remote control:  
You need to connect JVCs audio components through the COMPU  
LINK-4 (SYNCHRO) jacks (see page 31) in addition to the  
connections using cables with RCA pin plugs (see page 7).  
Aim the remote control directly at the remote sensor on the receiver.  
If you use the buttons on the front panel, the remote control will not  
operate that source. To operate a source with the remote control,  
the source must be selected using source selecting buttons on the  
remote control.  
Operating Audio Components  
A/V CONTROL RECEIVER  
To operate the cassette deck or CD recorder using the COMPU  
LINK remote control system, set the source name correctly. (See  
page 11.)  
Refer also to the manuals supplied with your audio components.  
CATV/DBS  
DVD  
VCR  
DVD MULTI  
VCR  
TV  
AUDIO  
FM/AM  
CD  
TV/DBS  
TAPE/CDR PHONO  
Sound Adjustment  
You can always use the following buttons:  
BASS  
TREBLE  
+
+
SURROUND SURROUND ANALOG/DIGITAL SLEEP  
ON/OFF  
MODE  
INPUT  
CENTER +  
BASS BOOST EFFECT  
SURROUND ON/OFF : Turn on or off the Surround modes.  
SURROUND MODE : Select the Surround modes.  
1
2
3
MENU  
REAR L +  
SOUND  
TEST  
4
5
6
ENTER  
DIMMER  
MUTING  
REAR R +  
7/P  
8
9
SUBWOOFER +  
After pressing SOUND, you can use the following buttons for sound  
adjustment:  
10  
RETURN  
0
+10  
100  
+
FM MODE  
CATV/DBS  
CONTROL  
+
+
+
SUBWOOFER +/–  
CENTER +/–  
REARL +/–  
REARR +/–  
EFFECT  
: Adjust the subwoofer output level.  
: Adjust the center speaker output level.  
: Adjust the left rear speaker output level.  
: Adjust the right rear speaker output level.  
: Select the DAP effect level.  
CH  
TV VOL  
VOLUME  
TV/VIDEO  
+
/REW  
FF/  
TUNING  
REC  
PAUSE  
CONTROL  
TEST  
: Turn on or off the test tone output.  
RM-SRX7020J REMOTE CONTROL  
Note:  
After adjusting sounds, press the corresponding source selecting  
button or CONTROL to operate your target source by using the 10  
keys; otherwise, the 10 keys cannot be used for operating your target  
source.  
When you press one of the following buttons, the remote  
control operation mode appears on the display window.  
Tuner  
You can always use the following buttons:  
A/V CONTROL RECEIVER  
FM/AM  
: Alternate between FM and AM.  
After pressing FM/AM, you can use the following buttons for tuner  
operations:  
Ex.: When you press CD.  
1 10, +10  
: Select a preset channel number directly.  
For channel number 5, press 5.  
For channel number 15, press +10, then 5.  
For channel number 20, press +10, then 10.  
Buttons on the Remote Control  
FM/AM  
Remote Control Operation Mode  
TUNER  
CD  
PHONO  
CD  
PHONO  
TAPE/CDR  
DVD  
DVD MULTI  
TV/DBS  
TAPE  
DVD  
DVD  
TV  
VCR  
TUNING +/–  
: Tune into stations.  
FM MODE  
: Change the FM reception mode.  
VCR  
CATV/DBS CONTROL  
CONTROL  
SOUND  
DBS  
VCR or TAPE or CDDSC  
SOUND  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD player  
Turntable  
After pressing CD, you can use the following buttons for CD  
operations:  
After pressing PHONO, you can perform the following operations  
on the turntable:  
3
: Start playback.  
3
7
: Start playing.  
4
: Return to the beginning of the current  
(or previous) track.  
: Stop operations.  
¢
: Skip to the beginning of the next track.  
: Stop playback.  
Cassette deck  
7
After pressing TAPE/CDR (or CONTROL repeatedly until TAPE”  
appears on the display window), you can use the following buttons  
for cassette deck operations:  
8
: Pause playback. To release it, press 3.  
1 10, +10  
: Select a track number directly.  
For track number 5, press 5.  
For track number 15, press +10, then 5.  
For track number 20, press +10, then 10.  
3
: Start playback.  
FF  
: Fast wind a tape from left to right.  
: Fast wind a tape from right to left.  
: Stop playback or recording.  
: Pause playback. To release it, press 3.  
REW  
7
CD changer  
8
After pressing CONTROL repeatedly until CDDSCappears on  
the display window, you can perform the following operations on  
the CD changer:  
REC PAUSE  
: Press this button to enter recording pause.  
Press this button then 3 to start recording.  
3
: Start playback.  
Notes:  
4
: Return to the beginning of the current  
(or previous) track.  
Before starting the above operations, make sure that you have  
changed the source name correctly. See page 11.  
You can use either TAPE/CDR button or CONTROL button to  
activate the buttons listed above. If you press TAPE/CDR, the  
playing source also changes. On the other hand, if you press  
CONTROL repeatedly to select TAPE,the playing source does not  
change.  
¢
: Skip to the beginning of the next track.  
: Stop playback.  
7
8
: Pause playback. To release it, press 3.  
1 6, 7/P  
: Select the number of a disc installed in a CD  
changer.  
After pressing CD, you can perform the following operations on the  
CD changer:  
CD recorder  
After pressing TAPE/CDR (or CONTROL repeatedly until TAPE”  
appears on the display window), you can use the following buttons  
for CD recorder operations:  
1 10, +10  
: Select a track number directly.  
For track number 5, press 5.  
For track number 15, press +10, then 5.  
For track number 20, press +10, then 10.  
For track number 30, press +10, +10, then 10.  
3
: Start playback.  
4
: Return to the beginning of the current  
(or previous) track.  
Example:  
Selecting disc number 4, track number 12, and starting playback.  
1. Press CONTROL repeatedly until CDDSCappears on the  
display window, then press 4.  
¢
: Skip to the beginning of the next track.  
: Stop playback.  
7
2. Press CD, then press +10, 2.  
8
: Pause playback. To release it, press 3.  
REC PAUSE  
: Press this button to enter recording pause.  
Press this button then 3 to start recording.  
If your CD changer is of 200-disc loading capability (except for  
XL-MC100 and XL-MC301),  
you can do the following operations using the number buttons after  
pressing CD:  
Notes:  
Before starting the above operations, make sure that you have  
changed the source name correctly. See page 11.  
• “TAPEappears on the display window even though you have  
changed the source name to CDR.”  
1
2
3
Select a disc number.  
Then select a track number (always enter two digits).  
Start playback.  
You can use either TAPE/CDR button or CONTROL button to  
activate the buttons listed above. If you press TAPE/CDR, the  
playing source also changes. On the other hand, if you press  
CONTROL repeatedly to select TAPE,the playing source does not  
change.  
Examples:  
Selecting disc number 3, track number 2, and starting playback.  
Press 3, then, 0, 2, then 3.  
Selecting disc number 10, track number 5, and starting playback.  
Press 1, 0, then, 0, 5, then 3.  
Selecting disc number 105, track number 12, and starting  
playback.  
Press 1, 0, 5, then 1, 2, then 3.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating JVCs Audio/Video Components  
DVD player  
Operating Video Components  
After pressing DVD or DVD MULTI (source selecting button), you  
can use the following buttons for DVD operations:  
IMPORTANT:  
To operate JVCs video components using this remote control:  
3
: Start playback.  
You need to connect JVCs video components through the AV  
COMPU LINK terminals (see page 32) in addition to the  
connections using cables with RCA pin plugs (see pages 7 and 8).  
Some JVCs VCRs can accept two types of the control signals —  
remote code Aand B.Before using this remote control, make  
sure that the remote control code of the VCR connected to the  
VCR jacks is set to code A.”  
4
: Return to the beginning of the current  
(or previous) track.  
¢
7
: Skip to the beginning of the next track.  
: Stop playback.  
8
: Pause playback. To release it, press 3.  
When using the remote control:  
For the DVD player and VCR operations, aim the remote control  
directly at the remote sensor on each component, not on the  
receiver.  
For the TV having the AV COMPU LINK terminal, aim the remote  
control directly at the remote sensor on the TV.  
DVD menu operations  
After pressing DVD or DVD MULTI  
(source selecting button), you can use  
the following buttons for DVD menu  
operations:  
CENTER +  
EFFECT  
1
TEST  
2
3
MENU  
REAR L +  
4
5
6
ENTER  
REAR R +  
7/P  
8
9
VCR  
SUBWOOFER +  
You can always perform the following operations:  
10  
RETURN  
0
+10  
100  
+
FM MODE  
VCR  
: Turn on or off a VCR.  
MENU  
: Display or erase the menu screen.  
: Select an item on the menu screen.  
: Enter a selected item.  
After pressing VCR (or CONTROL repeatedly until VCRappears  
on the display window), you can use the following buttons for VCR  
operations:  
5//3/2  
ENTER  
3
: Start playback.  
FF  
: Fast wind a tape.  
REW  
: Rewind a tape.  
TV  
7
: Stop playback or recording.  
: Pause playback. To release it, press 3.  
: Select a TV channel on the VCR.  
You can always perform the following operations:  
8
TV  
:Turn on or off a TV or a CATV converter.  
1 9, 0  
REC PAUSE  
TV/VIDEO  
: Change the input mode (TV tuner and video  
input).  
: Press this button to enter recording pause.  
Press this button then 3 to start recording.  
TV VOL +/–  
: Adjust the volume.  
CH +/–  
: Change the TV channels on the VCR.  
After pressing TV/DBS (source selecting button), you can use the  
following buttons for TV operations:  
Note:  
You can use either VCR button or CONTROL button to activate the  
buttons listed above. If you press VCR, the playing source also  
changes. On the other hand, if you press CONTROL repeatedly to  
select VCR,the playing source does not change.  
CH +/–  
1 9, 0, +10 (100+) : Select a channel.  
RETURN (10) : Function as the RETURN button.  
: Change the channels.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Other ManufacturersVideo Equipment  
By changing the transmittable signals, you can use the remote  
control supplied for this unit to operate other manufacturers’  
equipment.  
Refer also to the manuals supplied for the other products.  
To operate these components with the remote control, first you  
need to set the manufacturerscode each for TV, CATV converter,  
VCR and DVD player.  
Manufacturerscodes for TV  
Manufacturer  
Codes  
JVC  
AKAI  
00*, 02, 13, 14, 47, 74  
01, 02  
BLAUPUNKT  
FISHER  
03, 04  
01, 05  
GRUNDIG  
HITACHI  
IRADDIO  
ITT/NOKIA  
LOEWE  
03, 06, 07  
08, 09, 10, 49  
02  
11, 12  
06, 15, 16  
After replacing batteries of the remote control, set the  
manufacturerscodes again.  
To change the transmittable signals  
for operating a TV  
MAGNAVOX  
METS  
MITSUBISHI  
MIVAR  
08, 17, 49  
50, 51, 52, 53  
08, 18, 19, 20  
21  
1 Press and hold TV  
2 Press TV/DBS.  
.
NORDMENDE  
OKANO  
22, 23  
15  
3 Enter manufacturers codes using buttons 1 9,  
PANASONIC  
PHILIPS  
QUELLE  
24, 25, 26, 27, 76  
15, 17, 28, 75  
52, 53, 54, 55, 56, 57, 58,  
59, 60, 61, 62, 63, 64, 65,  
66, 67  
and 0.  
4 Release TV  
.
Now, you can perform the following operations on the TV.  
TV  
:Turn on or off the TV.  
RCA/PROSCAN  
SABA  
SAMSUNG  
SANYO  
08, 24, 29, 30, 31, 48  
32, 33, 68, 69, 70  
06, 08, 16, 34, 35, 49  
01, 05  
TV/VIDEO  
TV VOL +/–  
: Set the input mode (either TV or VIDEO).  
: Adjust the volume.  
After pressing TV/DBS, you can perform the following  
operations on the TV:  
SCHNEIDER  
SHARP  
02, 15, 36  
37, 38, 77  
SONY  
39  
CH +/–  
: Change the channels.  
TELEFUNKEN  
THOMSON  
TOSHIBA  
ZENITH  
40, 41, 42, 69  
71, 72  
37, 43, 44  
1 9, 0, +10 (100+) : Select a channel.  
10  
: Function as the ENTER button.  
45, 46  
* 00is the initial setting.  
Note:  
Refer also to the manual supplied with your TV.  
Manufacturerscodes are subject to change without  
notice. If they are changed, this remote control cannot  
operate the equipment.  
5 Try to operate your TV by pressing TV  
.
When your TV turns on or off, you have entered the correct  
codes.  
To change the transmittable signals for  
operating a CATV converter or DBS tuner  
If there are more than one code listed for your brand of TV,  
try each one until the correct one is entered.  
1 Press and hold CATV/DBS  
.
2 Press CATV/DBS CONTROL.  
3 Enter manufacturers codes using buttons 1 9,  
and 0.  
4 Release CATV/DBS  
.
Now, you can perform the following operations on the CATV  
converter or DBS tuner.  
CATV/DBS  
: Turn on or off the CATV converter or DBS tuner.  
After pressing CATV/DBS CONTROL, you can perform the  
following operations on the CATV converter or DBS tuner:  
CH +/–  
: Change the channels.  
1 9, 0, +10 (100+) : Select the channels.  
10  
: Function as the ENTER button.  
Note:  
Refer also to the manual supplied with your CATV converter or  
DBS tuner.  
TO BE CONTINUED TO THE NEXT PAGE  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Other ManufacturersVideo Equipment  
5 Try to operate your CATV converter or DBS  
tuner by pressing CATV/DBS  
To change the transmittable signals for  
operating a VCR  
.
When your CATV converter or DBS tuner turns on or off, you  
have entered the correct codes.  
1 Press and hold VCR  
2 Press VCR.  
.
If there are more than one code listed for your brand of  
CATV converter or DBS tuner, try each one until the correct  
one is entered.  
3 Enter manufacturers codes using buttons 1 9,  
and 0.  
4 Release VCR  
.
Note:  
Now, you can perform the following operations on the VCR.  
You cannot use both the CATV converter and DBS tuner at the same  
time.  
VCR  
: Turn on or off the VCR.  
After pressing VCR, you can perform the following operations  
on the VCR:  
Manufacturerscodes for CATV converter  
Manufacturer  
Codes  
CH +/–  
: Change the channels.  
: Select the channels.  
GENERAL INSTRUMENT 06, 07, 08, 09, 10,  
11, 12, 13, 14, 29  
HAMLIN/REGAL  
JERROLD  
1 9, 0, +10 (100+)  
10  
: Function as ENTER button.  
: Start playback.  
01, 02, 03, 04, 05  
06, 07, 08, 09, 10,  
11, 12, 13, 14  
15, 16, 17  
18, 19, 20  
21, 22  
23, 24, 25  
26  
27, 28  
3
FF  
: Fast-wind a tape.  
OAK  
REW  
: Rewind a tape.  
PANASONIC  
PIONEER  
SCIENTIFIC ATLANTA  
TOCOM  
7
: Stop playback or recording.  
: Pause playback. To release it, press 3.  
8
REC PAUSE  
: Press this button to enter recording  
pause.  
ZENITH  
Then press 3 to start recording.  
Manufacturerscodes are subject to change without  
notice. If they are changed, this remote control cannot  
operate the equipment.  
Note:  
Refer also to the manual supplied with your VCR.  
Manufacturerscodes for DBS tuner  
5 Try to operate your VCR by pressing  
Manufacturer  
Codes  
56, 57*, 67  
43, 44, 45, 46, 47  
30  
50, 51, 67  
31  
32, 33  
48, 52, 53, 55  
68  
VCR  
.
JVC  
When your VCR turns on or off, you have entered the correct  
codes.  
AMSTRAD  
BLAUPUNKT  
ECHOSTAR  
GOLDSTAR  
GRUNDIG  
HIRSHMANN  
INSTRUMENT  
ITT/NOKIA  
KATHREIN  
NEC  
If there are more than one code listed for your brand of  
VCR, try each one until the correct one is entered.  
34  
52, 58, 61, 62, 63  
35, 36  
48  
37, 38  
65  
ORBITECH  
PHILIPS  
RCA  
SAMSUNG  
SCHWAIGER  
SIEMENS  
SONY  
39, 40  
61, 64  
41, 42  
66  
TECHNISAT  
48  
* 57is the initial setting.  
Manufacturerscodes are subject to change without  
notice. If they are changed, this remote control cannot  
operate the equipment.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manufacturerscodes for VCR  
To change the transmittable signals for  
operating a DVD player  
Manufacturer  
Codes  
JVC  
00*, 26, 27, 28, 29, 58  
AIWA  
01, 02  
1 Press and hold AUDIO  
2 Press DVD.  
.
BELL & HOWELL 03  
BLAUPUNKT  
CGM  
EMERSON  
FISHER  
FUNAI  
04, 05  
06, 07  
08, 10, 11, 12, 64, 65  
03, 14, 15, 16, 17  
3 Enter manufacturers codes using buttons 1 9,  
and 0.  
4 Release AUDIO  
.
Now, you can use the following buttons on the DVD player.  
01  
GE  
18, 19, 20  
07  
13, 21  
06, 22  
18, 23, 24, 25, 66  
07, 21  
04, 19, 24  
30, 31, 32, 33, 34, 35  
26, 27  
03, 36  
38  
09  
19, 24, 39, 40  
04, 19, 21, 24, 41, 42  
21  
3
: Start playback.  
GOLDSTAR  
GOODMANS  
GRUNDIG  
HITACHI  
7
: Stop playback.  
¢
4
: Skip to the beginning of the next track.  
: Return to the beginning of the current  
(or previous) track.  
LOEWE  
MAGNAVOX  
MITSUBISHI  
NEC  
NOKIA  
NORDMENDE  
ORION  
PANASONIC  
PHILIPS  
PHONOLA  
RCA/PROSCAN  
8
: Pause playback. To release it, press 3.  
DVD menu operations  
After pressing DVD (source  
selecting button), you can use the  
following buttons for DVD menu  
operations:  
CENTER +  
EFFECT  
1
TEST  
2
3
MENU  
REAR L +  
4
5
6
ENTER  
REAR R +  
7/P  
8
9
SUBWOOFER +  
04, 18, 19, 23, 24, 43, 44,  
45  
10  
RETURN  
0
+10  
100  
+
FM MODE  
SABA  
38, 46  
SAMSUNG  
SANYO  
SHARP  
SIEMENS  
SONY  
TELEFUNKEN  
TOSHIBA  
ZENITH  
45, 47, 59, 61, 62, 63  
03, 48, 49  
37, 50  
03, 51  
52, 53, 54  
55, 60  
MENU  
: Display or erase the menu screen.  
: Select an item on the menu screen.  
: Enter a selected item.  
5//3/2  
ENTER  
43, 44  
57  
5 Try to operate your DVD player by pressing  
AUDIO  
.
* 00is the initial setting.  
When your DVD player turns on or off, you have entered the  
correct codes.  
Manufacturerscodes are subject to change without  
notice. If they are changed, this remote control cannot  
operate the equipment.  
If there are more than one code listed for your brand of DVD  
player, try each one until the correct one is entered.  
Manufacturerscodes for DVD player  
Manufacturer  
Codes  
JVC  
DENON  
00, 02  
01  
PANASONIC  
PHILIPS  
PIONEER  
RCA  
03  
13  
04, 05, 06  
07  
SAMSUNG  
SONY  
08  
09  
TOSHIBA  
YAMAHA  
10  
11, 12  
Manufacturerscodes are subject to change without  
notice. If they are changed, this remote control cannot  
operate the equipment.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVCs service center.  
POSSIBLE CAUSE  
The power cord is not plugged in.  
Speaker signal cables are not connected.  
SOLUTION  
PROBLEM  
The power does not come on.  
No sound from speakers.  
Plug the power cord into an AC outlet.  
Check speaker wiring and reconnect if  
necessary.  
The SPEAKERS ON/OFF 1 and 2 button  
are not set correctly.  
Press SPEAKERS ON/OFF 1 and 2 button  
correctly.  
An incorrect source is selected.  
Muting is activated.  
Select the correct source.  
Press MUTING to cancel the mute.  
An incorrect input mode (analog or  
digital) is selected.  
Select the correct input mode (analog or  
digital).  
Connections are incorrect.  
Check connections.  
For analog connections, see pages 6 8.  
For digital connections, see page 9.  
Speaker signal cables are not connected  
properly.  
Check speaker wiring and reconnect if  
necessary.  
Sound from one speaker only.  
The balance is set to one extreme.  
Incoming signal is too weak.  
Adjust the balance properly (see page 19).  
Continuous hiss or buzzing during FM  
reception.  
Connect an outdoor FM antenna or contact  
your dealer.  
The station is too far away.  
An incorrect antenna is used.  
Select a new station.  
Check with your dealer to be sure you have  
the correct antenna.  
Antennas are not connected properly.  
Ignition noise from automobiles.  
Check connections.  
Move the antenna farther from automobile  
traffic.  
Occasional cracking noise during FM  
reception.  
Your turntable is too close to speakers.  
Move speakers away from the turntable.  
Howling during record playing  
Noise is heard.  
An earth (H) cable is not connected to the  
AM (H) terminal on the rear panel.  
Connect the cable to the AM (H) terminal on  
the rear panel.  
Speakers are overloaded because of high  
volume.  
1. Press STANDBY/ON  
on the front  
OVERLOADstarts flashing on the  
display.  
panel to turn off the receiver.  
2. Stop the playback source.  
3. Turn on the receiver again, and adjust the  
volume.  
Speakers are overloaded because of short  
circuit of speaker terminals.  
Press STANDBY/ON  
then check the speaker wiring.  
on the front panel,  
If OVERLOADdoes not disappear, unplug  
the AC power cord, then plug it back again.  
If speaker wiring is not short-circuited, contact  
your dealer.  
The built-in microcomputer is not  
functioning correctly.  
Press STANDBY/ON  
turn off the receiver. After unplugging the  
power cord, consult your dealer.  
on the front panel to  
DSP MICON NGstarts flashing on the  
display.  
The receiver is overloaded because of a  
high voltage.  
Press STANDBY/ON  
turn off the receiver. After unplugging the  
power cord, consult your dealer.  
on the front panel to  
The STANDBY lamp lights up after  
turning on the power, but soon the  
receiver turns off (into standby mode).  
There is an obstruction in front of the  
remote sensor on the receiver.  
Remove the obstruction.  
Remote control does not work.  
Batteries are weak.  
Replace batteries.  
The remote control is not ready for your  
intended operation.  
Press SOUND or source selecting buttons  
first, then press the button you want to use.  
(See pages 34 39).  
Remote control does not operate as you  
intend.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Designs & specifications are subject to change without notice.  
Specifications  
Amplifier  
Output Power  
At Stereo operation:  
Front channels:  
100 W per channel, min. RMS, driven into 8 ,  
40 Hz to 20 kHz with no more than 0.8% total  
harmonic distortion.  
At Surround operation:  
Front channels:  
100 W per channel, min. RMS, driven into 8 at 1 kHz with no  
more than 0.8% total harmonic distortion.  
Center channel:  
Rear channels:  
100 W, min. RMS, driven into 8 at 1 kHz, with no more than  
0.8% total harmonic distortion.  
100 W per channel, min. RMS, driven into 8 at 1 kHz, with no  
more than 0.8% total harmonic distortion.  
Audio  
Audio Input Sensitivity/Impedance (1 kHz):  
PHONO (MM):  
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:  
2.7 mV/47 kΩ  
220 mV/47 kΩ  
0.5 V (p-p)/75 Ω  
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):  
Audio Input (DIGITAL IN)* :  
Coaxial: DIGITAL 1 (DVD):  
21 dBm to 15 dBm (660 nm 30 nm)  
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround  
(with sampling frequency 32 kHz, 44.1 kHz, 48 kHz).  
Audio Output Level:  
Digital output:  
TAPE/CDR, VCR:  
220 mV  
Optical: DIGITAL OUTPUT  
Signal wave length: 660 nm  
Output level: 21 dBm to 15 dBm  
70 dB/78 dB (at REC OUT)  
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:  
Signal-to-Noise Ratio (66 IHF/78 IHF):  
Frequency Response (8 ):  
PHONO (MM):  
87 dB/78 dB  
20 Hz to 20 kHz ( 1 dB)  
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:  
PHONO (MM):  
20 Hz to 20 kHz ( 1 dB)  
RIAA Phono Equalization:  
Bass boost:  
1 dB(20 Hz to 20 kHz)  
+3 dB 1 dB at 100 Hz  
Tone Control:  
Bass (100 Hz):  
Treble (10 kHz):  
10 dB  
10 dB  
Video  
Video Input Sensitivity/Impedance:  
Composite video:  
DVD, VCR, DBS:  
DVD, VCR, DBS:  
1 V(p-p)/75 Ω  
1 V(p-p)/75 Ω  
S-video:  
(Y: luminance):  
(C: chrominance, burst): 0.286 V(p-p)/75 Ω  
(Y: luminance):  
(PB/CB, PR/CR):  
Component video:  
DVD, DBS:  
1 V(p-p)/75 Ω  
0.7 V(p-p)/75 Ω  
Video Output Level/Impedance:  
Composite video:  
S-video:  
VCR, MONITOR OUT:  
VCR, MONITOR OUT:  
1 V(p-p)/75 Ω  
1 V(p-p)/75 Ω  
(Y: luminance):  
(C: chrominance, burst): 0.286 V(p-p)/75 Ω  
(Y: luminance):  
(PB/CB, PR/CR):  
Component video:  
MONITOR OUT:  
1 V(p-p)/75 Ω  
1 V(p-p)/75 Ω  
Synchronization:  
Negative  
45 dB  
Signal-to-Noise Ratio:  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
FM tuner (IHF)  
Tuning Range:  
87.5 MHz to 108.0 MHz  
Monaural:  
Usable Sensitivity:  
12.8 dBf (1.2 µV/75 )  
50 dB Quieting Sensitivity:  
Monaural:  
Stereo:  
21.3 dBf (3.2 µV/75 )  
41.3 dBf (31.5 µV/75 )  
Signal-to-Noise Ratio (IHF-A weighted):  
Total Harmonic Distortion:  
Monaural:  
Stereo:  
78 dB at 85 dBf  
73 dB at 85 dBf  
Monaural:  
Stereo:  
0.4% at 1 kHz  
0.6% at 1 kHz  
Stereo Separation at REC OUT:  
Alternate Channel Selectivity:  
Frequency Response:  
35 dB at 1 kHz  
45 dB: ( 400 kHz)  
30 Hz to 15 kHz: (+0.5 dB, 3 dB)  
AM tuner  
Tuning Range:  
Usable Sensitivity:  
530 kHz to 1 710 kHz  
Loop antenna:  
400 µV/m  
Signal-to-Noise Ratio:  
50 dB (100 mV/m)  
General  
Power Requirements:  
Power Consumption:  
AC 120V , 60 Hz  
180 W/230 VA (at operation)  
2 W (in standby mode)  
Dimensions (W x H x D):  
Mass:  
435 mm x 146.5 mm x 425.5 mm  
(17 3/16 in. x 5 13/16 in. x 16 13/16 in.)  
8.8 kg (19.5 lbs)  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Authorized Service Centers  
®
QUALITY  
SERVICE  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1 (800) 537-5722  
Dear Customer,  
In order to receive the most satisfaction from your purchase, please read the instruction booklet before  
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest  
authorized servicer or visit our website at www.JVC.com  
Remember to retain your Bill of Sale for Warranty Service.  
Do not service the television yourself  
Caution  
To prevent electrical shock,do not open the cabinet. There are no user serviceable  
parts inside. Please refer to qualified service personnel for repairs.  
Accessories  
To purchase accessories for your JVC product, please call toll free:1 (800)882-2345 or  
on the web at www.JVC.com  
BT-51002-5  
(0301)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
AUDIO-2  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE  
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date  
of original retail purchase for the period as shown below. ("The Warranty Period")  
PARTS  
LABOR  
2 YRS  
2 YRS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND  
IN COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.  
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service  
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts  
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen  
size 25 inches and above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized  
service center, please call toll free: (800) 537-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with  
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the  
name and location of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by  
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number  
or serial number has been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;  
7. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);  
There are no express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS  
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER  
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE  
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH  
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-  
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an  
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
1700 Valley Road  
Wayne, NJ 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF  
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION  
PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information  
for future reference.  
Model No. :  
Serial No. :  
Purchase data :  
Name of dealer :  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
J
C
1201NHMMDWJEIN  
V
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Dishwasher DI 620 User Manual
Intel Computer Hardware MAT 880 User Manual
JL Audio Car Speaker TR690 TXi User Manual
JVC CD Player XL MC334BK User Manual
Kalorik Kitchen Grill USK GR 25125 User Manual
Kanguru Solutions Network Router iNAS 100 User Manual
Kenmore Range 7907745 User Manual
KitchenAid Garbage Disposal KBDS250X User Manual
Kodak Camera Accessories CIS 267E User Manual
Kompernass Telephone KH5001 User Manual