MICRO COMPONENT SYSTEM
UX-S77
—Consists of CA-UXS77 and SP-UXS77
D I G I T A L
INSTRUCTIONS
GVT0131-003A
[UJ]
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as
follows:
1.Front: No obstructions and open spacing.
2.Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions
below.
3.Bottom: Place on a level surface. Maintain an adequate air path for ventilation by placing on
a stand with a height of 10 cm or more.
Front view
Side view
15 cm
15 cm
1 cm
1 cm
15 cm
15 cm
15 cm
10 cm
SP-UXS77
CA-UXS77
SP-UXS77
CA-UXS77
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable
parts inside the unit; leave all servicing to qualified service personnel.
3.CAUTION: Visible and invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE
UNIT.
G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction ............................................................2 Advanced Tape Operations .................................32
Precautions ..........................................................................2
How to Read This Manual ..................................................2
Recording on a Tape .........................................................32
Synchronized Disc Recording...........................................33
Getting Started ........................................................3 Timer Operations ..................................................35
Step 1: Unpack ....................................................................3
Step 2: Prepare the Remote Control....................................3
Step 3: Hook Up..................................................................4
Changing the Scanning Mode .............................................7
Setting the Timer...............................................................35
Setup Menu Operations .......................................37
Operating Procedure..........................................................37
7 LANGUAGE Setup Menu ...........................................38
7 PICTURE Setup Menu .................................................38
7 AUDIO Setup Menu .....................................................39
7 OTHERS Setup Menu ..................................................40
Restricting the Review—Parental Lock............................41
Before Operating the System .................................8
Playable Disc Types............................................................8
Parts Index...........................................................................9
Display Indicators .............................................................10
Daily Operations—Playback ...............................12 Additional Information ........................................43
Listening to the Radio .......................................................13
Playing Back a Disc ..........................................................14
Playing Back a Tape..........................................................16
Learning More about This System....................................43
Maintenance ......................................................................45
Troubleshooting ................................................................46
Language Code List ..........................................................47
Country/Area Codes List...................................................48
DVD OPTICAL DIGITAL OUT Signals.........................49
Specifications ....................................................................50
Daily Operations—Sound&Other Adjustments ....17
Adjusting the Volume .......................................................17
Adjusting the Sound..........................................................17
Presetting Automatic DVD Sound Increase Level............18
Adjusting the Audio Input Level.......................................18
Changing the Display Brightness......................................18
Changing the Picture Tone................................................18
Setting the Clock ...............................................................19
Turning Off the Power Automatically ..............................20
Unique DVD/VCD Operations ............................21
Selecting the Sound Track.................................................21
Selecting the Subtitle Language........................................22
Selecting the View Angle..................................................22
Playing Back a Bonus Group ............................................22
Selecting Browsable Still Pictures ...................................23
Special Effect Playback.....................................................23
Advanced Disc Operations ...................................24
Programming the Playing Order—Program Play..............24
Playing at Random—Random Play...................................25
Playing Repeatedly............................................................26
Prohibiting Disc Ejection—Child Lock ............................26
On-Screen Disc Operations ..................................27
On-screen Bar Information................................................27
Operations Using the On-screen Bar.................................28
Operations on the CONTROL Screen...............................30
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
• If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
Precautions
Installation
• Install in a place which is level, dry and neither too hot nor
too cold—between 5°C and 35°C.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
• Install the System in a location with adequate ventilation to
prevent internal heat buildup in the System.
How to Read This Manual
To make the explanations in this manual as simple and easy-
to-understand as possible, we have adapted the following
methods:
DO NOT install the System in a location
near heat sources, or in a place subject to
direct sunlight, excessive dust or vibration.
• Leave sufficient distance between the System and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
•
Button and control operations are explained as listed in the
table below. In this manual, the operations using the
remote control is mainly explained; however, you can use
the buttons and controls on the main unit if they have the
Power sources
• When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
same (or similar) name and marks
.
•
Some related tips and notes are explained later in the
sections “Learning More about This System” and
“Troubleshooting,” but not in the same section
explaining the operations. If you want to know more about
the functions, or if you have a doubt about the function, go
to these sections and you will find your answer there.
DO NOT handle the AC power cord with
wet hands.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
Indicates that you press the button
briefly
.
• After starting to heat the room
• In a damp room
• If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
Indicates that you press the button
briefly and repeatedly until an
option you want is selected.
Indicates that you press one of the
buttons.
Internal heat
•
A cooling fan is mounted on the rear panel to prevent heat
buildup inside the unit.
Indicates that you press and hold the
button for a specified period.
• The number inside the arrow
indicates the period of press (in this
example, 2 seconds).
• If no number is inside the arrow,
press and hold until the entire
procedure is complete or until you
get a result you want.
For safety, observe the following carefully:
• Make sure there is good ventilation around
the unit. Poor ventilation could overheat
and damage the unit.
• DO NOT block the cooling fan and the
ventilation openings or holes. If they are
blocked by a newspaper or cloth, etc., the
heat may not be able to get out.
2
sec.
Indicates that you turn the control
toward the specified direction(s).
Others
• Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
Indicates that this operation is only
possible using the remote control.
Remote
ONLY
DO NOT disassemble the System since there
are no user serviceable parts inside.
Indicates that this operation is only
possible using the buttons and controls on
the main unit.
Main Unit
ONLY
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Unpack
Step 1:Unpack the package and
check the accessories.
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
• Composite video cord (1)
• Batteries (2)
• AC plug adaptor (1)
If any item is missing, consult your dealer immediately.
Step 2: Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
1
Step 2:Prepare the remote control.
R6(SUM-3)/AA(15F)
2
Step 3:Hook up the components such
as AM/FM antennas, speakers,
etc. (see pages 4 to 7).
3
• DO NOT use an old battery together with a
new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, the remote control will be
damaged from battery leakage.
Finally plug the AC power cord.
Now you can operate the System.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Hook Up
If you need more detailed information, see pages 6 and 7.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
Turn the power off to all components before connections.
VCR, etc.
AUDIO OUT
White
AUX
Red
OPTICAL
DIGITAL IN
DECODER
VIDEO INPUT
P
R
Red
Blue
P
B
Green
Y
Audio cord (not supplied)
VIDEO INPUT
Yellow
Optical digital cord (not supplied)
TV
Component video cord (not supplied)
Composite video cord (supplied)
VIDEO INPUT
S-VIDEO cord (not supplied)
AV
COMPU LINK
AV COMPU LINK cord (not supplied)
(cord with monaural mini plug)
• For details, see “To connect the AV
COMPU LINK cords” on page 7.
To a wall outlet
Plug the AC power cord only after all connections are complete.
• If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
For better FM/AM reception
AM loop antenna
Keep it connected.
Vynile-covered wire (not supplied)
Extend it horizontally.
Outdoor FM
antenna
(not supplied)
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna
using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
FM antenna (supplied)
Extend it so that you can
obtain the best reception.
O P E N
U S H
P
O
R E V E R S E
A U T
VIDEO
S-VIDEO
OW
HIGH
VOL
T
AGE
SELECT
OR
220V—
230V
127V
1
10V
5
Download from Www.Somanuals.com. All Manuals Search And Download.
To assemble and connect the AM loop antenna
To assemble the AM loop antenna
To connect the speaker cords
Connect the right speaker to the RIGHT terminals, and the
left speaker to the LEFT terminals.
1 Open
2 Insert
3 Close
When connecting the speaker cords, match the polarity of
the speaker terminals:
To connect the AM loop antenna
• For LOW terminals: Red cord to (+) and black cord to (–).
• For HIGH terminals: Grey cord to (+) and blue cord to (–)
1 Hold
3 Release
The speakers are magnetically shielded to avoid color
distortions on TVs. However, if not installed properly, it
may cause color distortions. So, pay attention to the
following when installing the speakers.
–When placing the speakers near a TV set, turn off the
TV’s main power switch or unplug it before installing
the speakers.
2 Insert
Then wait at least 30 minutes before turning on the TV’s
main power switch again.
Some TVs may still be affected even though you have
followed the above. If this happens, move the speakers
away from the TV.
• If the AM loop antenna wire or speaker cords are covered
with vinyl, remove the vinyl to expose the tip of the
antenna by twisting the vinyl.
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. Also, keep the
antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
• DO NOT connect more than one speaker to
each terminal.
• DO NOT allow the conductor of the speaker
cords to be in touch with the metallic parts of
the System.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the AV COMPU LINK cords
This system allows you to use JVC’s TV with simple
operations; by starting playing back a disc, the TV
automatically turns on and changes the input mode to the
appropriate position so that you can view the playback
picture.
Adjusting the Voltage Selector
Use a screwdriver to slide the voltage selector so that the
voltage marker is pointing at the same voltage as where you
are plugging in the unit. (See also the back cover page.)
To use AV COMPU LINK, you need to connect the System
and the TV by using a cord with monaural mini-plugs (not
supplied) in addition to the video input/output connection
through the COMPONENT jacks, S-VIDEO jack or VIDEO
(composite) jack on the rear.
To connect digital audio
Voltage marker
DVD OPTICAL
DIGITAL OUT
DO NOT plug in before setting the voltage
selector on the rear of the unit and all
connection procedures are complete.
PCM/STREAM
Remote
ONLY
Before connecting optical digital cord, remove the
protective cap from the DVD OPTICAL DIGITAL OUT
terminal.
Changing the Scanning Mode
This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
DVD player by selecting “PROGRE.”
PROGRESSIVE
PROGRE
0
INTER
(at the same time)
PROGRE Progressive scanning. For a progressive
TV.
INTER
Interlaced scanning. For a conventional
TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operating the System
DVD Video—digital audio formats
The System can play back the following digital audio
Playable Disc Types
This unit has been designed to play back the following discs:
formats.
•
Linear PCM: Uncompressed digital audio, the same
format used for CDs and most studio masters.
Dolby Digital: Compressed digital audio, developed by
Dolby Laboratories, which enables multi-channel encode
to create the realistic surround sound.
DTS (Digital Theater Systems): Compressed digital
audio, developed by Digital Theater Systems, Inc., which
enables multi-channel like Dolby Digital. As the
compression ratio is lower than for Dolby Digital, it
provides wider dynamic range and better separation.
Region
Video
Disc Type
Mark (Logo)
Code*
Format
Number
•
DVD Video
DVD Audio
1
or
ALL
•
NTSC
Video CD
(VCD)
DIGITAL VIDEO
When playing a multi-channel encoded DVD, the System
properly converts these multi-channel signals into 2
channels, and emits the downmixed sound from the
speakers.
Super Video
CD (SVCD)
SUPER VIDEO
COMPACT
•
To enjoy the powerful sound of these multi-channel
encoded DVDs, connect a proper decoder or an amplifier
with a proper built-in decoder to the digital output terminal
on the rear.
Audio CD
DIGITAL AUDIO
CD-R
The System can play back CD-R or CD-RW
recorded in the Audio CD, Video CD, SVCD,
MP3, WMA, and JPEG formats.
CD-RW
IMPORTANT: Before playing a disc, make sure of
the following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays on the
TV screen.
• For disc playback, you can change the initial setting to
your preference. See “Setup Menu Operations” on
page 37.
DVD-R
The System can play back DVD-R or DVD-
RW recorded in the video format.
DVD-RW
In addition to the above discs, this system can play back audio
data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
• The following discs cannot be played back:
DVD-ROM, DVD-RAM, DVD+R, DVD+RW, CD-I (CD-I
Ready), CD-ROM, Photo CD, etc.
Playing back these discs will generate noise and damage the
speakers.
• In this manual, “file” and “track” are interchangeably used
for MP3/WMA/JPEG operations.
If “
” appears on the TV screen when you press a
button, the disc cannot accept the operation you have
tried to do, or data required for that operation is not
recorded on the disc.
• Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “MLP Lossless”, and the double-D
symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS2.0+DIGITAL OUT” are registered
trademarks of Digital Theater Systems, Inc.
* Note on Region Code
DVD players and DVDs have their own Region Code numbers.
This System can play back only DVDs recorded with the NTSC
color system whose Region Code numbers including “1.”
EX.:
If a DVD with the improper Region Code numbers is loaded,
“RGN ERR (REGION CODE ERROR)” appears on the display
and playback will not start.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Index
Refer to the pages to see how to use the buttons and controls.
Remote control
STANDBY/ON
AUDIO
SUB TITLE
ANGLE
1
3
2
12, 36
19
ZOOM
VFP
DISPLAY
SET
4
5
6
7, 13, 15, 18, 22 – 24, 29 – 31, 41, 42
3D PHONIC
DVD LEVEL
13, 18, 19, 35, 36
16, 19, 25, 35
8
9
7
RETURN
CANCEL
PROGRESSIVE PAGE +
10
0
10
TOP MENU
MENU
15
15
ENTER
15, 18, 19, 23, 25, 28, 31, 35, 37, 41
28
SET UP
ON SCREEN
37, 38, 41
12, 13
23
12, 14, 25
14
12, 16, 32
DISC
33
REC MODE
14, 16, 25
15, 23
18
14, 23, 25
13 – 16, 25
+
SLOW
GROUP/TITLE
CLOCK/
19, 35, 36
DIMMER A.STANDBY
TIMER
SLEEP
20
17
20
17
17
BASS/
TREBLE RHYTHM AX
FADE
MUTING
FM/PLAY REPEAT A-B
MODE
REPEAT
12, 17
26
7, 14 – 16, 18, 22, 23, 26, 31, 32
REV.MODE
VOLUME
13, 16, 24, 25, 32
RM-SUXS77U REMOTE CONTROL
Main unit
16, 32
10
STANDBY/
ON
12
12
12
12, 14, 25
FM/AM
/AUX
DVD/CD
TAPE
#
VOLUME
Remote sensor
17
R
H
Y
T
H
M
A
X
12, 17
14, 26
14
DISC
DISC1
DISC4
DISC3
DISC5
DISC2
SELECT
14, 25, 26
REC
3D PHONIC
15
33, 34
13, 14, 16, 25
14
12
CHANGER , PLAY & EXCHANGE
5-DVD
D
I
G
I
T
A
L
Digital Direct Progressive Scan
PHONES
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Indicators
The indications on the display teach you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.
WMA
MP3
1
DISC
REC
123
REC
A.STANDBY
ALL
GR.
MONO
ST PRGM
SLEEP
BONUSB.S.P
RAND
3D PHONIC
1 Disc tray indicators
• 1-5: Disc tray number indicators.
8 Repeat mode indicators
•
: lights when Repeat mode is activated.
•
(tray indicator):
• 1 DISC ALL A-B GR.:
–Lights when the disc is detected.
–Flashes while playing back a disc.
–Goes off when there is no disc in the tray.
(disc indicator): lights below when the tray indicator
indicates the current selected disc.
–1: lights when One Track Repeat is activated.
–1DISC: lights when One Disc Repeat is activated.
–ALL: lights when All Disc Repeat is activated.
–A-B: lights when A-B Repeat is activated.
–GR.: lights when Group Repeat is activated.
•
2 RHYTHM AX indicator
9 3D PHONIC indicator
• Lights when RHYTHM AX is activated (see page 17).
• Lights when 3D PHONIC is activated (see page 15).
3
WMA indicator
p SLEEP indicator
• Lights when the current track is recorded in WMA
format.
• Lights when the Sleep Timer is activated.
q FM reception indicators
4 MP3 indicator
• Lights when the current track is recorded in MP3 format.
• MONO: lights when FM reception mode is monaural.
• ST (stereo): lights while an FM stereo station with
sufficient signal strength is tuned in.
5 Main display
• While listening to radio: band (or preset number) and
station frequency appear.
w Disc operation indicators
• PRGM (program): lights when Program Play mode is
activated.
• RAND (random): lights when Random Play mode is
activated
• While selecting tape: “TAPE” appears.
• While selecting “AUX”: “AUX” appears.
• While playing a disc: see “Indications on the main
display while operating a disc” on page 11.
6 Tape operation indicators
e REC indicators
• Lights while recording.
•
2 3 (tape direction):
r BONUS indicator
• Lights when a DVD Audio with a bonus group is detected
(see page 22).
–Lights to indicate the current tape running direction.
–Flashes slowly during playback and recording.
–Flashes quickly while rewinding a tape.
(Reverse mode):
•
t B.S.P indicator
–
–
–
: tape play continues endlessly.
: tape automatically reverses once.
: tape play stops at the end of one side.
• Lights when the current disc is DVD Audio with
browsable still picture (see page 23).
y A (auto). STANDBY indicator
• Lights when Auto Standby is activated.
• Flashes when disc playback stops with Auto Standby
activated.
7 Timer indicators
: lights when Daily Timer or Recording Timer stands
by; flashes while working.
•
• 1/2/3: lights up when a Daily Timer (1, 2, or 3) stands by;
flashes while setting or working.
• REC: lights when the Recording Timer stands by; flashes
while setting or working.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Indications on the main display while operating a disc
While playing back a disc:
While disc play is stopped:
• DVD Video:
• DVD Video:
Chapter no.
Elapsed playing time
Total title no.
4
1
2
3
5
4
1
2
3
5
• By pressing DISPLAY, you can show the current title and
chapter numbers for a few seconds.
• DVD Audio:
• DVD Audio:
Group no.
Track no.
Elapsed playing time
Track no.
4
1
2
3
5
4
1
2
3
5
• By pressing DISPLAY, you can show the current group
and track numbers for a few seconds.
• Audio CD:
• Audio CD:
Total track no. Total playing time
Track no.
Elapsed playing time
4
1
2
3
5
4
1
2
3
5
• SVCD/VCD:
• SVCD/VCD:
Total track no.*
Total playing time
Track no.
Elapsed playing time*
4
1
2
3
5
4
1
2
3
5
*Changes to “PBC” when stopping PBC playback.
• MP3/WMA:
* “PBC” appears while playing a disc with PBC.
• MP3/WMA:
Elapsed playing time
Track no.
Current group no.
Current track No.
4
1
2
3
5
4
1
2
3
5
MP3
MP3
• By pressing DISPLAY, you can show the current group
and track numbers for a few seconds.
• JPEG:
• JPEG:
Current file no.
Current group no.
Group no.
File no.
4
1
2
3
5
4
1
2
3
5
• If Resume is turned “ON” (see page 40), “RESUME” appears when you stop playback (except for Audio CD and MP3/
WMA/JPEG discs).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Playback
In this manual, the operation using the remote control
is mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
10 keys
1
SET
1 Turn on the power.
The STANDBY/ON lamp on the main unit lights in
green.
3D PHONIC
RETURN
MENU
TOP MENU
, , ,
• Without pressing STANDBY/ON
, the System
ENTER
turns on by pressing one of the source selecting
buttons in the next step.
2
DISC
SELECT
8,7
2 Select the source.
1/¡
Playback automatically starts if the selected source is
ready to start.
GROUP/TITLE
4/¢
• If you press AUX, start playback source on the
external component.
3
SHIFT
FM/PLAY
MODE,
REV.MODE
3 Adjust the volume.
4 Operate the target source as explained
later.
To turn off (stand by) the unit
STANDBY/ON
1
2
The STANDBY/ON lamp on the main unit
lights in red.
• A small amount of power is always
consumed even while on standby.
STANDBY/ON
For private listening
DVD/CD
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
3
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
Otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
VOLUME
4
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Listening to the Radio
To preset the stations
You can preset 30 FM and 15 AM stations.
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz spacing, and other
countries use 10 kHz spacing.
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected.
You can change the AM tuner intervals while the System is
on stand by and the last selected source is AM.
2 Activate the preset number entry mode.
SET
4
1
2
3
5
DISC3
ST
• Finish the following process while the indication on the
display is flashing.
(at the same time)
3 Select a preset number for the station you store.
AUDIO
SUB TITLE ANGLE
Examples:
To select preset number 5, press
5.
To select preset number 15,
press +10, then 5.
To select preset number 30,
press +10, +10, then 10.
DISC4
1
3
VFP
2
5
8
ZOOM
4
6
(at the same time)
3D PHONIC
DVD LEVEL
9
7
PAGE
-
PAGE +
10
To select the band (FM or AM)
10
FM
AM
4
1
2
3
5
AUX
ST
4 Store the station.
To tune in to a station
While FM or AM is selected...
SET
4
1
2
3
5
Remote control:
Main unit:
ST
2 sec.
Remote
ONLY
2 sec.
To tune in to a preset station
GROUP/TITLE
1 Select the band (FM or AM).
FM
AM
Frequency starts changing on the display.
AUX
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency changes
step by step.
2 Select a preset number for the station you store.
AUDIO
1
SUB TITLE ANGLE
3
VFP
2
5
8
To stop searching manually, press either button.
ZOOM
4
Remote
ONLY
6
If the received FM station is hard to listen
3D PHONIC
DVD LEVEL
The MONO indicator lights on the display.
Reception will improve though stereo effect is
lost—Monaural reception mode.
To restore the stereo effect, press the button
again (the MONO indicator goes off).
9
7
PAGE
FM/PLAY
-
PAGE +
10
MODE
10
REV.M
•
You can also use the
station.
1
/
¡
button to select a preset
13
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen guide icons
Playing Back a Disc
• During DVD Video playback, the following icons may
appear on the TV screen:
Before operating a disc, be familiar how a disc is recorded.
• DVD Video comprises of “Titles” which includes
“
Chapters,” DVD Audio/MP3/WMA comprise of
At the beginning of a scene containing multi-
angle views.
“Groups” which include “Tracks,” and CD/SVCD/VCD
comprise of only “Tracks.”
• For JPEG playback, see “Operations on the
CONTROL Screen” on page 30.
At the beginning of a scene containing multi-
audio sounds.
At the beginning of a scene containing multi-
subtitles.
To insert a disc
You can insert a disc while playing another source.
• The following icons will be also shown on the TV screen
to indicate your current operation.
DISC1
DISC4
DISC3
DISC5
DISC2
,
,
,
,
,
To select a disc
DISC 1
DISC 5
DISC 2
DISC 4
DISC 3
• When current source is not disc, press DVD/CD 3 to
select the disc player as the source during “PLAY” flashing
on the display.
Remote
ONLY
To select a title/group
While playing...
To close the disc tray, press the same 0 again.
• When current selected disc tray open, you use DVD/CD 3
button to close disc tray and start playback (depending on
how the disc is programmed internally).
GROUP/TITLE
•
When you press
another disc onto, the first disc tray automatically closes and
then next tray comes out.
0
for the next tray you want to place
(at the same time)
To start:
To pause:
To stop:
• Group name appears for MP3/WMA discs.
DVD/CD
To select a chapter/track
While playing...
To release, press
DVD/CD 3.
• First time you press 4, you
can go back to the beginning of
the current chapter/track.
GROUP/TITLE
•
While playing DVD/SVCD/VCD: This System can store
the stop point, and when you start playback again by
pressing DVD/CD 3, it starts from the position where you
have stopped—Resume Play. (“RESUME” appears on the
display when you stop playback.)
To stop completely while Resume is activated, press 7
twice. (To cancel Resume, see “RESUME” on page 40.)
• When operating the System, the on-screen guide icon (see
the following table) appears on the TV.
To deactivate the on-screen guide icons, see “ON
SCREEN GUIDE” on page 40.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Remote
ONLY
To locate a particular portion
To play back using the disc menu
You can operate a disc—DVD and SVCD/VCD with
Playback Control (PBC)—using the disc menu shown on the
TV screen.
While playing a disc except MP3/WMA...
+
SLOW
SLOW
–
x2
x2
x5
x5
x10
x10
x20
x20
x60
x60
7 For DVD Video/DVD Audio:
• No sound comes out while searching on DVD Video/
SVCD/VCD.
1 Show the disc menu.
MENU
TOP MENU
To return to normal playback, press DVD/CD 3.
Remote
ONLY
2 Select an item on the disc menu.
To locate an item directly
You can select a title/chapter/track directly and start
playback.
ENTER
• For DVD Video, you can select a title before starting
playback, while you can select a chapter after starting
playback
.
AUDIO
1
SUB TITLE ANGLE
Examples:
3
VFP
2
5
8
To select number 5, press 5.
To select number 15, press +10,
then 5.
To select number 30, press +10,
+10, then 10.
• With some discs, you can also select items by entering the
number using the 10 keys.
ZOOM
4
6
3D PHONIC
DVD LEVEL
9
7
PAGE
-
PAGE +
10
10
To use 3D Phonic
While playing...
3D PHONIC
ACTION
OFF
DRAMA
7
THEATER
(at the same time)
ACTION
3D PHONIC
On the TV screen
ACTION
DRAMA
Suitable for action movies and sports
programs.
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
THEATER Enjoy sound effects like in a major theater.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
7 For SVCD/VCD with PBC:
Playing Back a Tape
While playing a disc with PBC, “PBC” appears on the
display.
To insert a tape
You can play back type I tapes.
When disc menu appears on the TV screen, select an item on
the menu. Playback of the selected item starts.
Push
Insert
Close
AUDIO
1
SUB TITLE ANGLE
Examples:
3
VFP
2
5
8
To select number 5, press 5.
To select number 15, press +10,
then 5.
To select number 30, press +10,
+10, then 10.
ZOOM
4
6
3D PHONIC
DVD LEVEL
9
7
PAGE
-
PAGE +
10
With the tape side facing outside
10
To start:
To stop:
To move to the next or previous page of the current
menu:
GROUP/TITLE
To rewind tape:
Moves to the next page.
Rewind the tape to the right.
Rewind the tape to the left.
Moves to the previous page.
To return to the previous menu:
RETURN
CANCEL
To change the tape running direction
3 (forward play)
2 (reverse play)
(at the same time)
To cancel PBC
To reverse the tape automatically
GROUP/TITLE
FM/PLAY
MODE
REV.MOD
• You can also cancel PBC function by pressing the number
button to select a track.
(at the same time)
Tape is played from the forward side to the
reverse side. When the reverse side is played
back, playback stops.
To reactivate PBC, press 7, then press 4.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Sound&Other Adjustments
Adjusting the Volume
Remote control
You can adjust the volume level from level 0 (VOL MIN) to
level 50 (VOL MAX).
Remote control:
Main unit:
VOLUME
VFP
DVD LEVEL
DISPLAY
SET
VOLUME
Remote
ONLY
, , ,
ENTER
To drop the volume in a moment
To restore the volume, press again, or
FADE
MUTING
adjust the volume level.
SLEEP
CLOCK/
DIMMER
TIMER
A.STANDBY
BASS/
TREBLE
VOLUME +/
-
SHIFT
FADE
MUTING
Adjusting the Sound
RHYTHM AX
To emphasize rhythm feeling—RHYTHM AX
This function emphasizes bass attack feeling.
RHYTHM AX
RHYTHMAX
OFF
(Canceled)
Main unit
To adjust the tone
You can adjust the bass and treble level from –5 to +5.
To adjust the bass
BASS/
TREBLE
TRE
BASS
Canceled
VOLUME
RHYTHM AX
VOLUME +/
-
To adjust the treble
BASS/
TREBLE
TRE
BASS
Canceled
VOLUME
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Presetting Automatic DVD Sound Increase
Changing the Display Brightness
You can dim the display window.
Remote
ONLY
Level
The DVD sound is sometimes recorded at a lower level than
for other discs and sources. You can set the increase level for
the currently loaded DVD, so you do not have to adjust the
volume every time you change the source.
DIMMER
DIM 2
AUTO DIM
DIM 1
DIM OFF
(Canceled)
DIM 1
Dims the display.
DVD LEVEL
NORMAL
HIGH
MIDDLE
9
DIM 2
Erases the display illumination.
AUTO DIM
Erase the display illumination a few
seconds after disc playback starts.
• The display illuminates when
playback stops.
(at the same time)
NORMAL Original recording level.
MIDDLE
HIGH
Output level is increased (less than “HIGH”).
Remote
ONLY
Output level is increased (more than
“MIDDLE”).
Changing the Picture Tone
While showing a playback picture on the TV screen, you can
select the preset picture tone, or adjust it and store your own
likeliness.
• Once the current DVD is ejected, this setting is canceled
and set automatically to “NORMAL.”
Remote
ONLY
To select a preset picture tone
Adjusting the Audio Input Level
1 Activate VFP.
If the sound from the component connected to the
AUX jacks is too loud or is not loud enough when changing
from another source to “AUX,” you can change the audio
input level through the AUX jacks (without changing the
volume level).
NORMAL
GAMMA
0
0
VFP
BRIGHTNESS
CONTRAST
SATURATION
TINT
6
0
0
0
0
While the “AUX” is selected as a source...
SHARPNESS
On the TV screen
(at the same time)
2
sec.
SET
AUX LVL 1
AUX LVL 2
2 Select a preset picture tone.
NORMAL
USER2
CINEMA
USER1
AUX LVL 1
AUX LVL 2
Select this when the sound is too loud
(initial setting).
Select this when the sound is not loud
enough.
NORMAL
CINEMA
Normally select this.
Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see page 19).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
To adjust the picture tone
Setting the Clock
1 Select “USER1” or “USER2.”
Without setting the built-in clock, you cannot use Daily
Timers (see page 35) and Sleep Timer.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• Follow steps 1 and 2 explained on page 18.
2 Select a parameter you want to adjust.
ENTER
• To go back to the previous step, press CANCEL.
1 Activate the clock setting mode.
CLOCK/
TIMER
4
1
2
3
5
GAMMA
Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
or dark (–8 to +8).
CONTRAST
Adjust if the far and near positions
are unnatural (–7 to +7).
2 Adjust the hour.
SATURATION Adjust if the picture is whitish or
SET
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
3 Adjust the minute.
SET
3 Adjust the parameter.
ENTER
Now the built-in clock starts working.
To check the current clock time during play
4 Repeat steps 2 to 3 to adjust other parameters.
DISPLAY
Clock
Source information
To erase the screen, press VFP again while holding SHIFT.
• While playing a DVD and MP3/WMA, you cannot check
the current clock time (see page 11).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Off the Power
Remote
ONLY
Automatically
To turn off the unit after playback is over—Auto
Standby
A.STANDBY
On
Canceled
When Auto Standby is in use, the A.STANDBY indicator
lights on the display.
When disc or tape play stops, the A.STANDBY indicator
starts flashing. If no operation is done for about 3 minutes
while the indicator is flashing, the System turns off (stands
by) automatically.
• Auto Standby does not work while you are listening to
radio (FM/AM) and the external component (AUX).
To turn off the unit after a certain period of time
—Sleep Timer
1 Specify the time (in minutes).
SLEEP
10 20 30 60 90 120 150
Canceled
2 Wait until the set time goes off.
To check the time remaining until the shut-off time
SLEEP
4
1
2
3
5
SLEEP
• If you press the button repeatedly, you can change the shut-
off time.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Unique DVD/VCD Operations
Remote
ONLY
Selecting the Sound Track
Remote control
For DVD Video: While playing back a chapter containing
audio languages, you can select the language to listen to.
For DVD Audio: While playing back a track containing
audio channels, you can select the audio channel to listen to.
For SVCD/VCD: When playing back a track, you can select
the audio channel to play.
SUB TITLE
ANGLE
10 keys
AUDIO
ZOOM
• You can also select the audio track using the on-screen bar
(see page 27).
PAGE -/+
AUDIO
, , ,
ENTER
1
DVD/CD3
8
SLOW
,
7
(at the same time)
-/+
While playing a DVD Video...
Ex.:
SHIFT
1/3
2/3
3/3
ENGLISH
FRENCH
JAPANESE
1/3
2/3
FRENCH
3/3
JAPANESE
ENGLISH
While playing a DVD Audio...
Ex.:
1/3
2/3
3/3
1
2
3
While playing an SVCD or VCD...
SVCD
AUDIO
ST1
ST2
L2
L1
1
R2
R1
VCD
ST
L
R
(at the same time)
ST1/ST2/ST To listen to normal stereo (2 channel)
playback.
L1/L2/L
R1/R2/R
To listen to the left audio channel.
To listen to the right audio channel.
• SVCD can have 4 audio channels. Karaoke SVCD usually
uses these 4 channels to record two 2-channel recordings
(ST1/ST2).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Remote
ONLY
Selecting the Subtitle Language
Selecting the View Angle
For DVD Video: While playing back a chapter containing
subtitles in different languages, you can select the subtitle
language to display on the TV screen.
While playing back a chapter (of DVD Video) containing
multi-view angles, you can view the same scene from
different angles.
For SVCD: While playing, you can select the subtitles even
if no subtitles are recorded on the disc.
• You can also select the multi-view angles using the on-
screen bar (see page 27).
• You can also select the subtitle language using the on-
screen bar (see page 27).
While playing...
ANGLE
While playing a DVD Video...
3
1 Display the subtitle selection window.
(at the same time)
SUB TITLE
Ex.:
2
1/3
2/3
3/3
1
2
3
(at the same time)
1/3
2/3
3/3
1
2
3
2 Select the subtitle language.
Remote
ONLY
Playing Back a Bonus Group
Ex.:
Some DVD Audios have a special group called “bonus
group” whose contents are not open to the public.
1/3
2/3
3/3
• To play back a bonus group, you have to enter the specific
“key number” (a kind of password) for the bonus group.
The way of getting the key number depends on the disc.
ENGLISH
FRENCH
JAPANESE
1/3
ENGLISH
2/3
FRENCH
3/3
JAPANESE
1 Select the bonus group.
• The bonus group is usually recorded as the last group
(for example, if a disc contains 4 groups including a
bonus group, “group 4” is the bonus group).
• For how to select the group, see “To select a title/group”
on page 14.
While playing an SVCD...
2 Enter the key number.
AUDIO
SUB TITLE ANGLE
SUB TITLE
1
3
2
5
8
ENTER
2
ZOOM
VFP
4
6
3D PHONIC
DVD LEVEL
9
7
(at the same time)
PROGRESSIVE
0
1/4
2/4
OFF
1
2
3
Follow the interactive instructions shown on the TV
screen
.
4/4
3/4
4
3
To cancel the key number entry, press 7.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
2 Select slow motion speed.
Selecting Browsable Still Pictures
+
SLOW
SLOW
–
While playing back a track (of DVD Audio) linked to
browsable still pictures (BSP), you can select the still picture
(turn the page) to be shown on the TV screen.
• If a track is linked to browsable still pictures (BSP), they
are usually shown in turn automatically during playback.
• You can also select the page using the on-screen bar (see
page 27).
Forward slow motion starts.
Reverse slow motion* starts.
+
SLOW
SLOW
1/32
1/32
1/16
1/16
1/8
1/8
1/4
1/4
1/2
1/2
+
PAGE
10
10
(at the same time)
*Not available for SVCD/VCD.
To resume normal playback, press DVD/CD 3.
Remote
ONLY
Special Effect Playback
Still picture playback
To replay the previous scenes
(One touch replay function)
• This function is only used while playing DVD Video.
To start still picture
playback:
To resume normal
playback:
The playback position moves back 10
seconds before the current position (only
within the same title).
While playing...
DVD/CD
Remote
ONLY
Zoom
1 While playing back....
Frame-by-frame playback
ZOOM
1 While playing...
4
Still picture playback starts.
(at the same time)
2 Advance the still picture frame by frame.
ZOOM
4
As the number increases, magnification also increases.
To resume normal playback, press DVD/CD 3.
2 Move the zoomed-in position.
Slow-motion playback
1 While playing...
Still picture playback starts.
To resume normal playback, press ZOOM repeatedly until
“ZOOM OFF” appears on the TV screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Disc Operations
Programming the Playing Order—
Remote control
Remote
ONLY
Program Play
You can arrange the playing order of the chapters or tracks
(up to 99) before you start playback.
1 Before starting playback, activate Program Play.
10 keys
FM/PLAY
MODE
PROGRAM RANDOM
CANCEL
Canceled
,
ENTER
4
1
2
3
5
DVD/CD3
PRGM
8
,
7
On the display
4/¢
FM/PLAY
MODE
PROGRAM
No Disc
1
2
3
4
5
Group/Title
Track/Chapter
SHIFT
REPEAT A-B
REPEAT
6
7
8
9
10
USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO DELETE THE PROGRAM.
On the TV screen
2 Select chapters or tracks you want for Program Play.
Main unit
•
For DVD/MP3/WMA:
1 Select a disc number.
2 Select a title or group number.
3 Select a chapter or track number.
• For SVCD/VCD/CD:
1 Select a disc number.
2 Select tracks.
• If the disc is not in current tray, the System may
prompt for the group/title number entry as well,
however, during playback, the System will ignore
these entries.
• You can use ENTER button to skip the group/title
number entry.
DVD/CD
#
0DISC1
To enter the numbers:
Examples:
7
4/¢
AUDIO
1
SUB TITLE ANGLE
To enter number 5, press 5.
To enter number 15, press +10,
then 5.
To enter number 30, press +10,
+10, then 10.
3
VFP
2
5
8
ZOOM
4
6
3D PHONIC
DVD LEVEL
9
7
PAGE
-
PAGE +
10
10
3 Repeat the above step 2.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
4 Start playback.
Playing at Random—Random Play
Playback starts in the order you
have programmed.
You can play the chapters or tracks of all loaded discs at
random.
DVD/CD
• Random Play cannot be used for some DVDs.
1 Before starting playback, activate Random Play.
To skip a step:
To pause:
To stop:
FM/PLAY
MODE
PROGRAM RANDOM
GROUP/TITLE
Canceled
To release, press
4
1
2
3
5
DVD/CD 3.
RAND
To check the programmed contents
Before or after playback...
2 Start playback.
Playback starts in random order.
In the reverse order.
DVD/CD
Random Play ends when all the
tracks are played once (when
Repeat Play is not activated).
In the programmed order.
To skip a chapter/
track:
To pause:
To stop:
To modify the program
Before or after playback...
To erase the last step:
To erase the entire
program:
RETURN
CANCEL
To skip to the begin-
ning of the current
track, press 4 .
To release, press
DVD/CD 3.
• During Random Play, you cannot select disc by using
DISC SELECT button.
To add steps in the program:
Repeat steps 2 and 3 on page 24.
To exit from Random Play
Before or after playback...
FM/PLAY
To exit from Program Play
Before or after playback...
FM/PLAY
MODE
MODE
PROGRAM RANDOM
PROGRAM RANDOM
Canceled
Canceled
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Playing Repeatedly
Repeats all discs in all tray or all
programmed tracks.
ALL
• You can also select the repeat mode using the on-screen
bar (see page 28).
1
Repeats the current chapter/track.
Repeats the current title/group.
Repeats the current disc.
GR.
Repeat Play
You can repeat playback.
1DISC
Canceled
• For DVD Video:
While playing...
Cancels Repeat Play mode.
REPEAT A-B
REPEAT
1
GR.
ALL
A-B Repeat
Canceled
You can repeat playback of a desired portion by specifying
the beginning (point A) and the ending (point B).
• A-B Repeat cannot be used for MP3/WMA and for some
DVDs.
Before starting playback...
REPEAT A-B
REPEAT
ALL
• A-B Repeat can be used within the same title while playing
a DVD Video, and within the same track for the other
discs.
Canceled
• For DVD Audio:
While playing or before playback...
1 While playing (without PBC for SVCD/VCD), select
the start point (A).
REPEAT A-B
A- lights on the display.
REPEAT
1
GR.
ALL
A-
•
appears on the
REPEAT A-B
REPEAT
Canceled
TV screen if the TV is
turned on.
• For MP3/WMA:
While playing or before playback...
(at the same time)
REPEAT A-B
REPEAT
1
1DISC
ALL
GR.
2 Select the end point (B).
Canceled
A- changes to
A-B.
REPEAT A-B
REPEAT
•
appears on the
TV screen.
A-B
•
For CD/SVCD/VCD:
While playing (without PBC for SVCD/VCD) or before
playback...
• You can search for the end
point using the ¡ button.
REPEAT A-B
REPEAT
1
1
DISC
(at the same time)
Canceled
ALL
To cancel A-B Repeat, press REPEAT A-B again while
holding SHIFT.
While playing (with PBC for SVCD/VCD) ...
REPEAT A-B
REPEAT
ALL
Main Unit
ONLY
Canceled
Prohibiting Disc Ejection—Child Lock
You can lock the disc trays so that no one can eject the
loaded disc.
• This is possible while the System is on standby.
While the disc trays are closed...
•
For Program Play:
While playing or before playback...
REPEAT A-B
REPEAT
1
ALL
Canceled
DISC1
•
For Random Play:
While playing or before playback...
(at the same time)
REPEAT A-B
To cancel the prohibition, repeat the same procedure.
“UNLOCKED” appears on the display.
REPEAT
1
1
DISC
Canceled
ALL
26
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Disc Operations
On-screen Bar Information
Remote control
You can check the disc information (except for MP3/WMA/
JPEG disc) and use some functions through the on-screen
bar.
ZOOM
10 keys
1 Disc type
2 Playback information
Indication
Mbps
Meanings
, , ,
Current transfer rate
(Megabits per second)
Current disc
ENTER
ON SCREEN
DISC
2
DVD/CD 3
8
TITLE
2
3
7
Current title
4/¢
Current chapter
Current group
Current track
Time indications
CHAP
GROUP
1
TRACK 14
REPEAT
SHIFT
TOTAL1:25:58
3 Operation modes
Indication
Meanings
Playback
/
/
Forward/Reverse search
On-screen bars
DVD Video
Forward/Reverse slow-motion
1
2
Pause
Stop
3
8.5Mbps
DISC
2
T
I
TL
E
2
3
TIME 1:01:58
CHAP
DVD-VIDEO
TIME
O
F
F
CHAP.
1
/3/3/1
1
1
4 Function icons (on the pull-down menu)
Indication
TIME
Meanings
Select to change the time indication.
4
DVD Audio
1
2
3
3
3
3
OFF
Select to repeat playback.
Select for time search.
Select for chapter search.
Select for track search.
GROUP 14 TRACK 23
TIME 0:23:58
DISC
2
DVD-AUDIO
TIME
OFF
1/3
1/3
PAGE
TRACK
CHAP.
4
SVCD
TRACK
1
2
Select to change the audio language or
channel (see also page 21).
1/3
1/3
TRACK
TIME 0:04:58
3
D
IS
C
2
SVCD
Select to change subtitle language
(see also page 22).
TIME
O
F
F
ST1
–
/
4
4
4
VCD
Select to change the view angle (see
also page 22).
1/3
1
2
Select to change the page (see also
page 23).
PAGE 1/5
TRACK
TIME 0:04:58
3
D
IS
C
2
VCD
TIME
O
F
F
S
T
CD
1
2
DISC
TIME0:04:58
2
TRACK
3
CD
TIME
O
F
F
4
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Operations Using the On-screen Bar
For detailed operations of the following functions, see also
“Operations Using the On-screen Bar” on the left.
Ex.: Selecting a subtitle (French) for DVD Video:
Changing the time information
While a disc is selected as the source...
You can change the time information in the on-screen bar
and the display window on the main unit.
1 Display the on-screen bar with the pull-down menu.
ON SCREEN
1 Display the on-screen bar with the pull-down menu.
8.5Mbps
DISC 2 TITLE
2
CHAP
3
TOTAL 1:01:58
DVD-VIDEO
8.5Mbps
DISC 2
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DVD-VIDEO
TIME
O
F
F
CHAP.
1
/3
1/
3
1
/1
8.5Mbps
DISC
2
T
I
TL
E
2
C
H
AP
3
T
O
T
A
L
1
:0
1
:5
8
DVD-VIDEO
TIME
O
F
F
CHAP.
1
/3
1/
3
1
/1
TIME
2 Make sure
is selected (highlighted).
3 Change the time indication.
Goes off
ENTER
2 Select (highlight) the item you want.
T. REM 0:35:24
TIME 0:25:31
TOTAL 1:01:58
REM 0:11:23
TOTAL
T. REM
TIME
Elapsed disc time.
8.5Mbps
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DISC 2
DVD-VIDEO
Remaining disc time.
TIME
O
F
F
CHAP.
1
/3/1
1
/
3
1
Elapsed playing time of the current
chapter/track.
3 Display the pop-up window.
REM
Remaining time of the current chapter/
track.
ENTER
CHAP
TOTAL 1:01:58
3
T
2
T
I
TL
E
2
1
/3/1
1
/
3
1
To erase the on-screen bar
ENGLISH
ON SCREEN
4 Select the desired option in the pop-up window.
T
2
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
1
/3/1
2
/
3
1
Repeat Play
• See also page 26.
FRENCH
1 While playing a disc (without PBC for SVCD/VCD),
display the on-screen bar with the pull-down menu.
5 Finish the setting.
2 Select
.
Pop-up window goes off.
OFF
ENTER
3 Display the pop-up window.
8.5Mbps
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DISC 2
DVD-VIDEO
TIME
O
F
F
CHAP.
1
/3/1
1
/
3
1
OFF
To erase the on-screen bar
ON SCREEN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select the repeat mode you want.
Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.
ALL
Repeats all discs or all programmed
track.
1 While playing (without PBC for SVCD/VCD), display
the on-screen bar with the pull-down menu.
• Except for DVD: Time Search can be used before
starting playback.
A-B
Repeats a desired portion (see next
column).
TITLE
GROUP
DISC
Repeats the current title.
Repeats the current group.
Repeats the disc (except for DVD).
Repeats the current chapter.
Repeats the current track.
Cancels Repeat Play.
2 Select
.
3 Display the pop-up window.
CHAPTER
TRACK*
OFF
8.5Mbps
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DISC 2
DVD-VIDEO
TIME
O
F
F
CHAP.
TIME _ : _ _ : _ _
1
/3/1
1
/
3
1
*During Program Play and Random Play, “STEP”
appears.
4 Enter the time.
You can specify the time in hours/minutes/seconds.
5 Finish the setting.
AUDIO
1
SUB TITLE ANGLE
Examples:
3
VFP
2
5
8
ENTER
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0, then
0.
ZOOM
4
6
3D PHONIC
DVD LEVEL
9
7
PROGRESSIVE
To move to a point of 54
(minutes): 00 (seconds), press
0, 5, 4, 0, then 0.
0
A-B Repeat
• See also page 26.
• It is always required to enter the hour digit (even “0”
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a misentry, press cursor < to erase the last
entry.
1 While playing, display the on-screen bar with the pull-
down menu.
2 Select
.
OFF
3 Display the pop-up window.
5 Finish the setting.
8.5Mbps
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DISC 2
DVD-VIDEO
The System starts playing the
TIME
O
F
F
CHAP.
1
/3/1
1
/
3
1
ENTER
disc from the selected playing
time.
OFF
4 Select “A-B”.
8.5Mbps
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DISC 2
DVD-VIDEO
TIME
O
F
F
CHAP.
1
/3/1
1
/
3
1
Chapter/Track Search
A–B
You can search for the chapter (DVD Video) or track (DVD
Audio) number to play.
5 Select the start point (A).
1 While playing, display the on-screen bar with the pull-
down menu.
ENTER
8.5Mbps
T
I
TL
E
2
C
H
DISC 2
DVD-VIDEO
CHAP.
TRACK
2 Select
or
.
TIME
A
-
CHAP.
1
/3
3 Display the pop-up window.
8.5Mbps
T
I
TL
E
2
CHAP
TOTAL 1:01:58
3
DISC
2
DVD-VIDEO
6 Select the end point (B).
TIME
O
F
F
CHAP.
1
/3/1
1
/
3
1
CHAPTER
_
A-B Repeat starts. The selected
portion plays repeatedly.
ENTER
• Before pressing ENTER, you can
search for the end point using ¡.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
4 Enter the desired chapter/track number.
Operations on the CONTROL Screen
AUDIO
1
SUB TITLE ANGLE
Examples:
To select chapter/track 5, press
5.
To select chapter/track 15,
press 1, then 5.
To select chapter/track 30,
press 3, then 0.
The CONTROL screen automatically appears on the TV
screen when you load an MP3, WMA, or JPEG disc.
You can search for and play the desired tracks through the
CONTROL screen.
• If both types of files (MP3/WMA files and JPEG files) are
recorded on a disc, select the file type to play (see page 39).
3
VFP
2
5
8
ZOOM
4
6
3D PHONIC
DVD LEVEL
9
7
PROGRESSIVE
0
CONTROL screen
Ex.: When the MP3 disc is loaded.
6
• To correct a misentry, press the 10 keys until the
desired number shown in the pop-up window.
5 Finish the setting.
7
8
REPEAT TRACK Time : 00:00:14
The System starts playing the
searched chapter or track.
ENTER
1
Group : 2 / 3
Track : 5 / 14 (Total 41)
9
Blue
Red
Green
Cloudy.mp3
Fair.mp3
Fog.mp3
2
Hail.mp3
Indian summer.mp3
Rain.mp3
3
4
Track Information
0
-
Shower.mp3
Snow.mp3
Thunder.mp3
Typhoon.mp3
Wind.mp3
Title
Rain
Artist
5
Album
Winter sky.mp3
1 Current group number/total group number
2 Current group
3 Group list
4 Current track (in blue)
5 Track information (ID3 Tag Version 1.0: only for
MP3/WMA)
6 Repeat Play setting
7 Elapsed playing time of the current track
(only for MP3/WMA)
8 Operation mode icon
9 Current track number/total number of tracks in the
current group (total number of tracks on the loaded
disc)
0 Highlight (green) bar
- Track list
30
Download from Www.Somanuals.com. All Manuals Search And Download.
To move the highlight bar between group list and track
list
To repeat slide-show for JPEG
While playing or before starting playback...
REPEAT A-B
REPEAT
Moves the bar to the track
list.
GR.
1DISC
ALL
Canceled
Moves the bar to the group
list.
GR.
1DISC Repeats the current disc.
ALL Repeats all disc.
Repeats the current group.
To select a group/track in the list
Move the highlight bar to a desired
item.
• For Repeat Play of MP3/WMA, see page 26.
• If you move the highlight bar
while playing back an MP3/
WMA disc, the selected track
starts playback automatically.
To zoom in the still picture
• You cannot zoom in the still picture during slide-show.
1 While playing...
To start playback
For MP3/WMA:
4
1
2
3
5
Playback starts with the selected
track.
ENTER
2 Change the magnification.
• Pressing DVD/CD 3 also starts
playback.
ZOOM
4
For JPEG:
The selected track (still picture)
is displayed until you change it.
ENTER
(at the same time)
ZOOM
ZOOM 1
ZOOM 2
4
ZOOM OFF
Slide-show playback starts.
Each track (still picture) is
shown on the screen for few
seconds, then changes one after
another.
DVD/CD
As the number increases, magnification also increases.
3 Move the zoomed-in position.
• Once you start playing back a JPEG track, the CONTROL
screen goes off.
• To cancel slide-show, and display the current still picture,
press ENTER.
To skip a track:
To pause:
To stop
playback:
GROUP/TITLE
To resume normal playback, press ZOOM repeatedly until
“ZOOM OFF” appears on the TV screen.
To release, press
DVD/CD 3.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Tape Operations
IMPORTANT
It may be unlawful to record or play back copyrighted
Remote control
material without the consent of the copyright owner.
Recording on a Tape
You can use type I tapes for recording.
• To play a tape, see page 16.
1 Insert a recordable cassette.
Push
Insert
Close
TAPE 23
FM/AM/AUX
7
DVD/CD3
DISC
SELECT
DISC
REC MODE
With the tape side facing outside
REV.MODE
SHIFT
2 Check the tape running direction and Reverse mode
settings on the display.
Tape direction indicator
4
1
2
3
5
Reverse mode indicator
To change the direction
Current source
Main unit
3 (forward)
2 (reverse)
PUSH
OPEN 0
To change the Reverse mode if necessary
FM/PLAY
MODE
TAPE
FM/AM
/AUX
DVD/CD
REV.MOD
#
DISC SELECT
REC
(at the same time)
7
To record on both sides.
• When using Reverse mode, start
(
)
recording in the forward (3) direction.
To record on only one side.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select the Recording mode.
3 Select and start playing the source—“FM,” “AM,”
“DVD/CD,” or “AUX.”
DISC
REC MODE
• When recording a disc, you can also use “Synchronized
Disc Recording” (see below).
ONE DISC
ALL DISC
1ST TRK
Canceled
4 Start recording.
ONE DISC Records the entire disc.
ALL DISC Records the all loaded discs continuously
REC
(except for DVD Video/DVD Audio).
1ST TRK
Records the first track of each disc (only
for SVCD/VCD/CD).
On the main unit
5 Start recording when the recording mode selected in
To stop recording:
step 4 is still shown on the display.
The System automatically
creates 4-second blanks between
the tunes recorded on the tapes.
REC
• While recording a disc, recording stops automatically after
the disc player plays back the disc.
On the main unit
• If the loaded disc is not compatible for the current
recording mode, the disc player skips the disc and loads the
next one.
• When either disc play or recording ends, both disc player
and the cassette deck stop at the same time.
Synchronized Disc Recording
You can start and stop both disc play and tape recording at
the same time.
To record a “Live” disc
It will not be desirable to put 4-second blank portions
between the tunes recorded on the tape.
To record the entire disc without any interruption
recorded, pause the disc play (press 8 on the remote
control) before pressing REC.
1 Load a disc and insert a recordable cassette.
• If the current playing source is not the disc player, press
DVD/CD 3, then 7.
2 Check the tape running direction and Reverse mode
settings on the display.
• See step 2 of “Recording on a Tape” on page 32.
To record Program Play or Random Play
1 Select Program Play (and make a program) or Random
Play, but do not start playback.
3 Select the disc number you want to start recording
from.
2 Press REC to start recording.
• When disc play stops, recording continues. It is
required that recording be stopped manually.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To record only your favorite track
You can specify tracks to be recorded on the tape while
listening to a disc.
• This function is not available for DVD Video.
1 Start playing a disc.
DVD/CD
2 While a track you want to record on the tape is
playing...
The disc player returns to the
beginning of that track and the
track is recorded on the tape.
After recording the track, the
disc player and cassette deck
automatically stop.
REC
On the main unit
3 Repeat steps 2 and 3 to record other tracks you want.
• You can exchange the discs if necessary.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
Remote
ONLY
Setting the Timer
Remote control
Using Daily Timer, you can wake up with your favorite
music. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers or Recording Timer at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
STANDBY/
ON
SET
CANCEL
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
,
Timer initial settings when shipped from the factory:
• DAILY 1:ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2:ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3:ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)
• REC TMR:ON Time (8:00)/OFF Time (10:00)/
Source (TUNER FM 1)
CLOCK/
TIMER
1 Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
Daily 1 Timer
Daily 2 Timer
Daily 3 Timer
CLOCK/
TIMER
DAILY 1 ON (Time) DAILY 2 ON (Time)
DAILY 3 ON (Time)
ON (Time)
REC TMR
Canceled
Clock setting
(see page 19)
Recording Timer
4
1
2
3
5
1
Ex. When Daily Timer 1 setting mode is selected
• When the clock has not been adjusted, pressing
CLOCK/TIMER makes the System enter the clock
setting mode.
2 Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
SET
1
2
Set the hour then minute for on-time.
Set the hour then minute for off-time.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
3
For Daily Timers: Select the playback source—
“TUNER FM,” “TUNER AM,” “TAPE,” “DISC”
or “AUX.”
How Recording Timer actually works
When Recording Timer has been set, Timer (
indicator and the REC indicator are lit on the display.
Recording Timer works only once.
)
4
1
2
3
5
1
When the on-time comes
The System turns on, tunes in to the specified station, sets
the volume level to last level when the unit has been
turned off, and starts recording.
For Recording Timer: Select the playback
source—“TUNER FM,”“TUNER AM” or “AUX.”
For “TUNER FM” and “TUNER AM”: Select a
preset channel.
For “DISC”: Select the disc number, group/title
number, then the track/chapter number.
For Daily Timers: Select the volume level.
• You can select the volume level (“VOL 1” to “VOL
50” and “VOL – –”). If you select “VOL – –,” the
volume is set to the last level when the unit has
been turned off.
For Recording Timer: The volume level is set
automatically to the last level when the unit has
been turned off.
Once settings are complete, the Timer setting
information appears in sequence.
4
5
When the off-time comes
The System stops recording, and turns off (stands by).
• The timer setting remains in memory until you change
it.
To turn off the Timer after its setting is done
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
1 Select the Timer you want to cancel.
Daily 1 Timer
Daily 2 Timer
Daily 3 Timer
CLOCK/
TIMER
DAILY 1 ON (Time) DAILY 2 ON (Time)
DAILY 3 ON (Time)
ON (Time)
REC TMR
Canceled
Clock setting
(see page 19)
Recording Timer
3 Turn off the unit (on standby) if you have set the timer
with the System turned on.
4
1
2
3
5
STANDBY/ON
1
Ex.To cancel Daily Timer 1
2 Turn off the selected Timer.
RETURN
CANCEL
How Daily Timer actually works
Once the Daily Timer has been set, the timer (
)
indicator and timer number indicator (1/2/3) are lit on the
display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next column) or another timer is activated.
To turn on the Timer
1 Select the Timer (DAILY 1, DAILY 2, DAILY 3, or
REC TMR) you want to activate.
When the on-time comes
Daily 1 Timer
Daily 2 Timer
Daily 3 Timer
CLOCK/
TIMER
The System turns on, tunes in to the specified station or
start playing the loaded disc with the specified chapter or
track, and sets the volume level to the preset level.
DAILY 1
ON (Time) DAILY 2 ON (Time) DAILY 3
ON (Time)
REC TMR
Canceled
ON (Time)
Clock setting
(see page 19)
Recording Timer
• While Daily Timer is working, the timer (
) indicator
and timer number indicator (1/2/3) flash on the display.
4
1
2
3
5
When the off-time comes
1
The System stops playback, and turns off (stands by)
automatically.
• The timer setting remains in memory until you change
it.
Ex.When Daily Timer 1 is selected
2 Activate the selected Timer.
SET
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu Operations
.
Remote
ONLY
Operating Procedure
Remote control
You can use the Setup Menus only when a disc is selected
as the source and its playback is not yet started.
Ex.: Selecting “STILL PICTURE” for “FILE TYPE”:
1 Display the Setup Menu.
SET UP
LANGUAGE
10 keys
SET UP
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP]
.
, , ,
ENTER
2 Select one of the Setup Menus.
PICTURE
MONITOR TYPE
4:3 LB
AUTO
ON
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
AUDIO
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
3 Select the item you want to adjust.
PICTURE
MONITOR TYPE
4:3 LB
AUTO
ON
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
Setup Menu Icons
AUDIO
The icon for the selected Setup Menu will be
highlighted.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
4 Display the pop-up window.
Ex.: LANGUAGE Setup Menu is selected.
PICTURE
ENTER
MONITOR TYPE
PICTURE SOURCE
4:3 LB
AUTO
ON
1
2
3
4
SCREEN SAVER
FILE TYPE
AUDIO
AUDIO
STILL PICTURE
SELECT
ENTER
USE
TO SELECT . USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
5 Select the desired option in the pop-up window.
PICTURE
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
4:3 LB
AUTO
ON
LANGUAGE
MENU LANGUAGE
ENGLISH
AUDIO
AUDIO
ENGLISH
ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE
STILL PICTURE
SELECT
ENTER
USE USE ENTER TO CONFIRM
TO SELECT
.
ON SCREEN LANGUAGE
TO EXIT, PRESS [SET UP].
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
1 LANGUAGE Setup Menu
2 PICTURE Setup Menu
3 AUDIO Setup Menu
4 OTHERS Setup Menu
37
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Finish the setting.
7 PICTURE Setup Menu
You can select the desired options concerning a picture or
monitor screen.
ENTER
PICTURE
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
4:3 LB
AUTO
ON
7 Repeat steps 3 to 4 to set other items on the same
Setup Menu.
AUDIO
Repeat steps 2 to 4 to set other items on another Setup
Menu.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS
[
SET UP
]
.
To erase the Setup Menu
SET UP
MONITOR TYPE
You can select the monitor type of your TV when you play
DVD Video recorded with aspect ratio of 16:9.
Select one of the following:
7 LANGUAGE Setup Menu
You can select the initial languages for disc playback. You
can also select the language shown on the TV screen while
operating this System.
16:9 (Wide television conversion):
Select when the aspect ratio of your TV is 16:9 and
when the TV has the screen size adjustment function.
4:3 LB (Letter Box):
Select when the aspect ratio of your TV is 4:3. While
viewing a wide screen picture, the black bars appear on
the top and the bottom of the screen.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
4:3 PS (Pan Scan):
ON SCREEN LANGUAGE
Select when the aspect ratio of your TV is 4:3. While
viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures
will not be shown on the screen.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
MENU LANGUAGE
Some discs have multiple menu languages.
Select from—ENGLISH, SPANISH, FRENCH, CHINESE,
GERMAN, ITALIAN, JAPANESE, AA – ZU (see
“Language Code List” on page 47).
Ex.: 16:9
Ex.: 4:3 LB
Ex: 4:3 PS
AUDIO LANGUAGE
Some discs have multiple audio languages.
Select from—ENGLISH, SPANISH, FRENCH, CHINESE,
GERMAN, ITALIAN, JAPANESE, AA – ZU (see
“Language Code List” on page 47).
SUBTITLE
Some discs have multiple subtitle languages.
Select from—ENGLISH, SPANISH, FRENCH, CHINESE,
GERMAN, ITALIAN, JAPANESE, AA – ZU (see
“Language Code List” on page 47) or “OFF (no subtitle).”
ON SCREEN LANGUAGE
Select one of the languages shown on the TV from—
ENGLISH, SPANISH, and FRENCH.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE SOURCE
7 AUDIO Setup Menu
You can obtain optimal picture quality by selecting an
appropriate option—picture source type (either video source
or film source).
You can adjust the sound settings of the System.
AUDIO
DIGITAL AUDIO OUTPUT
DOWN MIX
STREAM/PCM
DOLBY SURROUND
AUTO
Select one of the following:
D. RANGE COMPRESSION
AUTO: Normally select this.
When playing back a disc containing both video
and film sources, the System automatically
changes the processing to match it to the picture
type (film or video source) of the current chapter.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS
[
SET UP
]
.
FILM: To play a film source disc.
VIDEO: To play a video source disc.
DIGITAL AUDIO OUTPUT
When using the digital output terminal on the rear, set this
correctly according to the connected component.
SCREEN SAVER
You can activate or deactivate screen saver while operating
the built-in disc player.
Select one of the following:
PCM ONLY:
To connect to a linear PCM digital
equipment.
Select one of the following:
DOLBYDIGITAL To connect to a Dolby Digital decoder
ON:
The picture on the TV becomes dark when no
operation is done for about 5 minutes.
/PCM:
or an amplifier with a built-in Dolby
Digital decoder.
OFF:
To cancel the screen saver.
STREAM/PCM: To connect to a DTS decoder or an
amplifier with a built-in DTS decoder.
FILE TYPE
• See also “DVD OPTICAL DIGITAL OUT Signals” on
page 49.
If both audio tracks (MP3 or WMA files) and still picture
(JPEG files) are recorded on a disc, you can select which to
play.
DOWN MIX
Select one of the following:
When using the digital output on the rear, set this correctly
according to the connected component.
When playing a multi-channel DVD, the System converts
the signals into 2 channels properly.
AUDIO:
To play MP3/WMA files.
STILL PICTURE: To play JPEG files.
Select one of the following:
DOLBY
SURROUND: Pro Logic decoder.
STEREO: To connect a conventional stereo
amplifier, receiver, MD player, TV, etc.
To connect an amplifier with the Dolby
39
Download from Www.Somanuals.com. All Manuals Search And Download.
D. RANGE COMPRESSION
AV COMPULINK MODE
You can compress the dynamic range (the difference
between the loudest sound and the softest sound) to enjoy a
powerful sound even at a low volume level when listening to
Dolby Digital software. This is useful at night.
• The effectiveness varies depends on a software.
When connecting the System to a JVC’s TV with the AV
COMPU LINK remote control system, select the proper
setting.
Select one of the following:
DVD1: To connect to the VIDEO-3 Input jack on the TV.
DVD2: To connect to the VIDEO-1 Input jack on the TV.
DVD3: To connect to the VIDEO-2 Input jack on the TV.
Select one of the following:
AUTO: To apply the compression effect to the
downmixed multi-channel sound.
ON:
To always apply the compression effect for all
Dolby Digital software. Loud sound will become
low and vice versa.
For details, see “To connect the AV COMPU LINK cords”
on page 7.
PARENTAL LOCK
Select this to enter the PARENTAL LOCK submenu.
See the section that follows.
7 OTHERS Setup Menu
You can change some other convenient functions.
OTHERS
RESUME
ON
ON
ON SCREEN GUIDE
AV COMPULINK MODE
PARENTAL LOCK
DVD1
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
RESUME
You can activate or deactivate Resume for disc playback
(see page 14).
Select one of the following:
ON:
To activate Resume.
To cancel Resume.
OFF:
ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons (see
page 14).
• When recording the picture on a VCR, select “OFF” to
avoid recording the guide icons on your video tape.
Select one of the following:
ON:
To activate the on-screen guide icons.
To cancel the on-screen guide icons.
OFF:
40
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select “COUNTRY CODE,” then display the pop-up
Restricting the Review
window.
Remote
ONLY
—Parental Lock
PARENTAL LOCK
ENTER
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
G
UG
UM
N
US
You can restrict playback of DVD Video containing violent
scenes and those unsuitable for your family members. Once
you have set the rating level, such violent scenes (for which
a higher level than you set is assigned) may be skipped or
changed to another scene (depending on how the disc is
programmed).
_
UY
UZ
VA
VC
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
6 Select the country code of your area.
• See “Country/Area Codes List” on page 48 to find your
country code.
To set Parental Lock
Set the rating level—Level 1 (most restrictive) to Level 8
(least restrictive).
ENTER
1 Display the Setup Menu.
SET UP
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
7 Make sure “SET LEVEL” is selected, then display the
ON SCREEN LANGUAGE
pop-up window.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
PARENTAL LOCK
TO EXIT, PRESS [SET UP]
.
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
H
NONE
ENTER
8
N
7
_
6
5
4
3
2 Select the OTHERS Setup Menus.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
OTHERS
RESUME
ON
ON
ON SCREEN GUIDE
AV COMPULINK MODE
PARENTAL LOCK
DVD1
8 Set the rating level (NONE, 8 – 1).
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
ENTER
3 Select “PARENTAL LOCK.”
OTHERS
RESUME
ON
ON
ON SCREEN GUIDE
AV COMPULINK MODE
PARENTAL LOCK
DVD1
The System automatically enters “PASSWORD” entry
mode.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
9 Make sure “PASSWORD” is selected, then enter any
TO EXIT, PRESS [SET UP].
4-digit number for your password.
AUDIO
1
SUB TITLE ANGLE
4 Enter the PARENTAL LOCK submenu.
3
2
5
ENTER
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
ZOOM
VFP
ENTER
US
4
6
DVD LEVEL
9
NONE
_
_
_
_
PASSWORD
3D PHONIC
EXIT
8
PROGRESSIVE
0
7
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
10 Finish the setting.
ENTER
41
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the setting
To release Parental Lock temporarily
When you set a strict rating level, some discs may not be
played back at all. When you try to play such a disc, the
following screen appears on the TV.
1 Display the PARENTAL LOCK sub menu.
• Follow steps 1 to 4 of “To set Parental Lock”.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
4
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
_
_
_
_
_
_
_
_
PASSWORD
SELECT
ENTER
PASSWORD? ••• PRESS
TO EXIT, PRESS [SET UP].
0
~
9
KEY
“PASSWORD” is automatically selected.
• You cannot select any item other than “EXIT” until you
enter the correct password.
SELECT
ENTER
USE 5∞ TO SELECT. USE ENTER TO CONFIRM.
2 Enter your password.
1 Select “TEMPORARY RELEASE,” then press
AUDIO
1
SUB TITLE ANGLE
ENTER.
3
2
ZOOM
VFP
ENTER
“PASSWORD” is
automatically selected.
4
5
6
DVD LEVEL
9
3D PHONIC
ENTER
8
PROGRESSIVE
0
7
• If you enter a wrong password, “– – – –” appears again.
• If you enter a wrong password three times, “EXIT” is
automatically selected. In this case, press ENTER to
exit from the PARENTAL LOCK submenu.
• If you do not play back such a disc, select “NOT
RELEASE,” then press ENTER. Then eject the disc.
2 Enter your password.
• If you forget your password, enter “8888.”
AUDIO
1
SUB TITLE ANGLE
3 Change the settings.
3
2
• Follow steps 5 to 8 of “To set Parental Lock”.
ZOOM
VFP
ENTER
4 Enter your password again.
4
5
6
DVD LEVEL
9
AUDIO
1
SUB TITLE ANGLE
3D PHONIC
3
2
8
PROGRESSIVE
0
7
ZOOM
VFP
ENTER
4
5
6
DVD LEVEL
9
3D PHONIC
8
PROGRESSIVE
0
7
• If you enter a wrong password three times, “NOT
RELEASE” is automatically selected. In this case, press
ENTER. Then eject the disc.
• If you want to change a password, enter a new four digit
number in this step.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
• For MP3/WMA/JPEG playback...
Learning More about This System
– This System cannot play “packet write” discs.
– MP3/WMA/JPEG discs are required a longer readout
time than regular CDs. (It depends on the complexity of
the group/file configuration.)
– Some MP3/WMA/JPEG files cannot be played back and
will be skipped. This result from their recording
processes and conditions.
Getting Started (see pages 3 to 7)
Changing the Scanning Mode:
• To enjoy the progressive video picture, connect a TV with
the progressive video input using component video cord.
Daily Operations—Playback (see pages 12 to 16)
Listening to the Radio:
• If you store a new station into an occupied preset number,
the previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc:
• When using an 8 cm disc, place it on the inner circle of the
disc tray.
• On some DVD, SVCD, or VCD discs, the actual
operations may be different from what is explained in this
manual, due to the programming and disc structure; such
differences are not a malfunction of this System.
• When discs* in more than one tray are loaded on the disc
trays, they are played in sequence as follows:
Ex.:When DISC 2 is selected:
– When making MP3/WMA discs, use ISO 9660 Level 1
or Level 2 for the disc format.
– This System can play back MP3/WMA/JPEG files with
the extension code <.mp3>, <.wma> or <.jpg>
(regardless of the letter case—upper/lower).
– It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps.
This System cannot play back files made at bit rate of
less than 64 kbps.
– This System can recognize the total of 1000 tracks and of
99 groups (each group can contain up to 150 tracks).
Those exceeding the maximum number cannot be
recognized.
Daily Operations—Sound&Other Adjustments
(see pages 17 to 20)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or
putting the headphones.
Adjusting the Sound:
• This function also affects the sound through the
headphones.
DISC 2]DISC 3]DISC 4]DISC 5]DISC 1
(then stops)
* When no disc is loaded on the tray, that disc number is
skipped.
• You can exchange discs while playing or selecting another
disc.
• Some DVD Audio discs prohibit downmixed output.
When you play back such a disc, “LR ONLY” appears on
the display and the System plays back the left front and
right front signals.
Setting the Clock:
• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
• 3D Phonic setting is also applied to the optical digital
output signals through the DVD OPTICAL DIGITAL
OUT terminal.
• When using Resume on SVCD or VCD with PBC, the
playback might start on a position slightly different from
where you have stopped.
• You can use Resume only for the DVD/SVCD/VCD
except for some discs—depending how the disc is
programmed.
Unique DVD/VCD Operations (see pages 21 to 23)
• During slow-motion playback, no sound will be
reproduced.
• One touch replay function works only within the same title,
though it works between chapters.
• One touch replay function does not work during Program
Play and Random Play.
• While zoomed in, the picture may look coarse.
• Resume function does not work during Program Play and
Random Play.
Advanced Disc Operations (see pages 24 to 26)
Programming the Playing Order—Program Play:
• If you try to program a 100th track, “MEM FULL (memory
full)” appears on the display.
• While programming steps...
Your entry will be ignored if you have tried to program an
item number that does not exist on the disc (for example,
selecting track 14 on a disc that only has 12 tracks).
• You cannot use Program Play and Random Play for JPEG
discs.
• You cannot eject tray while in Program Play.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing at Random—Random Play:
Timer Operations (see pages 35 and 36)
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
• The 4 button does not work for skipping chapters or tracks,
but only work for going back to the beginning of the current
chapter or track.
• Without stopping the recording, you cannot change the source
after Recording Timer start recording.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source, Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording, Recording Timer is canceled, but recording
continues until Sleep Timer shuts off the power.
On-Screen Disc Operations (see pages 27 to 31)
• For JPEG files playback...
– It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of
more than 640 x 480, it will take a long time to be
shown.)
– This System can play only baseline JPEG files.
Progressive JPEG files or lossless JPEG files cannot be
played.
Setup Menu Operations (see pages 37 to 42)
LANGUAGE Setup Menu:
• When the language you have selected for “MENU
LANGUAGE,” “AUDIO LANGUAGE,” or “SUBTITLE” is
not recorded on a disc, the original language is used as the
initial language.
Baseline JPEG format: Used for digital cameras,
web, etc.
Progressive JPEG format:Used for web.
Lossless JPEG format: An old type and rarely used
now.
PICTURE Setup Menu—MONITOR TYPE:
• Even if “4:3 PS” is selected, the screen size may become 4:3
letter box with some DVD Video discs. This depends on how
the discs are recorded.
• When you select “16:9” for a picture whose aspect ratio is 4:3,
the picture slightly changes due to the process for converting
the picture width.
– This System may not play back JPEG files properly
which are recorded by the devices other than digital still
camera.
– If progressive or lossless JPEG files are played back, a
black screen appears. In this case, stop playback and
select a baseline JPEG file. Note that it may take a long
time to select another file.
AUDIO Setup Menu—DOWN MIX:
• This setting is not effective when DTS multi-channel software
is played back.
Advanced Tape Operations (see pages 32 to 34)
Recording on a Tape:
OTHERS Setup Menu—ON SCREEN GUIDE:
• Setup Menus and on-screen bar will be displayed (and
recorded) even though this function is set to “OFF.”
Subtitles and the information for zooming in always appear
on the display regardless of this setting.
• The recording level is automatically set correctly. Thus,
you can adjust the sound you are actually listening to
without affecting the recording level.
• There is leader tape which cannot be recorded onto at the
start and end of cassette tapes. Thus, when recording CDs
or radio broadcasts, wind the leader tape first to ensure that
the recording will be made without any music part lost.
• If you start recording with no cassette inserted, “NO
TAPE” appears on the display. If a protected tape has been
inserted, “NO REC” appears.
MP3/WMA/JPEG groups/tracks configuration
This System plays back the tracks as follows.
Hierarchy
Level 1
ROOT
Level 2
Level 3
Level 4
Level 5
9
• When using Reverse mode for recording, start recording in
the forward (3) direction first; otherwise, recording will
stop when only one side (reverse) of the tape is recorded.
01
03
04
10
3
7
02
4
5
6
8
• You can also change Reverse mode setting (
after starting recording.
and
)
11
12
05
1
• You cannot open or close the disc tray while recording a
2
disc.
Group with its play order
Track with its play order
Synchronized Disc Recording:
01
• When the tape reaches its end in the forward direction (3)
during recording with Reverse mode set to , the last
1
tune will be re-recorded at the beginning of the reverse side
(except for DVD Video).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the speaker grilles
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Handling discs
• When removing the disc from its case, hold it at the edge
while pressing the center hole lightly.
Speaker
grille
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc.
• Avoid exposure to direct sunlight, temperature extremes,
and moisture.
Holes
Projection
To clean the disc:
• Wipe the disc with a soft cloth in a straight line from center
to edge.
Handling cassette tapes
• If the tape is loose in its cassette, take up the slack by inserting
a pencil in one of the reels and rotate it.
– If the tape is loose, it may get stretched, cut, or caught in the
cassette.
• Be careful not to touch the tape surface.
• Avoid the following places to store the tape—in dusty places,
in direct sunlight or heat, in moist areas, on a TV or speaker,
or near a magnet.
To keep the best recording and playback sound quality:
• Use a cotton swab moistened with alcohol to clean the heads,
capstans, and pinch rollers.
• Use a head demagnetizer (available at electronics and audio
shops) to demagnetize the heads (when the System turned off).
Cleaning the System
• Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
• Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it strongly.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as
insecticides to it.
• DO NOT allow any rubber or plastic to remain in contact
for a long time.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA or JPEG tracks are not played back.
] The inserted disc may includes both type of tracks
(MP3/WMA files and JPEG files). In this case, you can
only play back the files selected by the “FILE TYPE”
setting (see page 39).
Troubleshooting
If you are having a problem with your System, check this list
for a possible solution before calling for service.
] You have changed the “FILE TYPE” setting after you
inserted a disc. In this case, reload the disc.
“NO AUDIO” appears.
General:
Adjustments or settings are suddenly canceled before
you finish.
] This System cannot play back illegally produced DVD
] There is a time limit. Repeat the procedure again.
Audio discs.
Operations are disabled.
“LR ONLY” appears.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the AC power
cord and then plug it back in.
] Some DVD Audio discs prohibit downmixed output.
When you play back such a disc, this System plays back
the left front and right front signals only.
The disc sound is discontinuous.
] The disc is scratched or dirty.
The disc tray does not open or close.
] The AC power cord is not plugged in.
] Child Lock is in use (see page 26).
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
Tape Operations:
No picture appears on the screen.
] The video cord connections are incorrect or loose.
The cassette holder cannot be opened.
] Power supply from the AC power cord has been cut off
No picture is displayed on the TV screen, the picture is
blurred, or the picture is divided into two parts.
] The System is connected to a TV which does not support
progressive scanning.
The left and right edges of the picture are missing on the
screen.
while the tape was running. Turn on the System.
Recordings:
Impossible to record.
] Small tabs on the back of the cassette are removed. Cover
the holes with adhesive tape.
] Select “4:3 LB” for “MONITOR TYPE” (see page 38).
Timer Operations:
Daily Timer and Recording Timer do not work.
] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
Radio Operations:
Hard to listen to broadcasts because of noise.
] Antennas connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and
positioned.
Setup Menu Operations:
No subtitle appears on the display though you have
selected the initial subtitle language.
Disc Operations:
The disc does not play.
] Some DVDs are programmed to always display no
subtitle initially. If this happens, press SUB TITLE
(while holding SHIFT) after starting play (see page 22).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs are programmed to always use the original
language initially. If this happens, press AUDIO (while
holding SHIFT) after starting play (see page 21).
] The disc is placed upside down. Place the disc with the
label side up.
ID3 Tag on an MP3/WMA disc cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version
2. This System can only show ID3 Tag Version 1.
MP3/WMA/JPEG groups and tracks are not played
back as you expect.
] The playing order is determined when the disc was
recorded. It depends on the writing application.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
JW
KA
KK
KL
KM
KN
KO
KS
Javanese
Georgian
Kazakh
SL
Slovenian
Samoan
Shona
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
Afar
SM
SN
SO
SQ
SR
SS
Abkhazian
Afrikaans
Ameharic
Arabic
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
ST
KU
KY
LA
LN
LO
LT
SU
SV
SW
TA
TE
TG
TH
TI
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Telugu
Tajik
Bislama
Bengali, Bangla
Tibetan
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
LV
MG
MI
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Breton
TK
TL
TN
TO
TR
TS
Catalan
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Corsican
Czech
Welsh
Turkish
Tsonga
Tatar
Danish
Bhutani
Greek
Malay (MAY)
Maltese
TT
TW
UK
UR
UZ
VI
Twi
Esperanto
Estonian
Basque
Burmese
Nauru
Ukrainian
Urdu
Nepali
Uzbek
Persian
Dutch
Vietnamese
Volapuk
Wolof
Finnish
Norwegian
Occitan
VO
WO
XH
YO
ZU
FJ
Fiji
FO
FY
GA
GD
GL
GN
GU
HA
HI
Faroese
Frisian
(Afan) Oromo
Oriya
Xhosa
Yoruba
Zulu
Irish
Panjabi
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
PL
Polish
PS
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
PT
QU
RM
RN
RO
RU
RW
SA
Hindi
HR
HU
HY
IA
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Rumanian
Russian
Kinyarwanda
Sanskrit
IE
SD
Sindhi
IK
SG
Sangho
IN
Indonesian
Icelandic
Hebrew
Yiddish
SH
Serbo-Croatian
Singhalese
Slovak
IS
SI
IW
JI
SK
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Country/Area Codes List
DK
DM
DO
DZ
EC
EE
EG
EH
ER
ES
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Eritrea
Spain
JO
JP
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
Andorra
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
KE
KG
KH
KI
KM
KN
KP
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic People’s
Republic of
Korea, Republic of
Kuwait
Cayman Islands
Kazakhstan
Lao People’s Democratic
Republic
KR
KW
KY
KZ
LA
ET
FI
FJ
Ethiopia
Finland
Fiji
FK
FM
FO
FR
FX
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Falkland Islands (Malvinas)
Micronesia (Federated States of)
Faroe Islands
France
France, Metropolitan
Gabon
United Kingdom
Grenada
Georgia
French Guiana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe
Equatorial Guinea
Greece
South Georgia and the South
Sandwich
Guatemala
Guam
Guinea-Bissau
Guyana
Hong Kong
Heard Island and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean Territory
Iraq
Iran (Islamic Republic of)
Iceland
Italy
Jamaica
Aruba
Azerbaijan
Bosnia and Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Côte d’Ivoire
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
LB
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
ML
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
Moldova, Republic of
Madagascar
Marshall Islands
Mali
MM Myanmar
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Mongolia
Macau
GT
GU
GW
GY
HK
HM
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
Mauritius
Maldives
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
NL
NO
JM
48
Download from Www.Somanuals.com. All Manuals Search And Download.
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Réunion
Romania
SE
SG
SH
SI
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Slovakia
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
Turks and Caicos Islands
Chad
French Southern Territories
Togo
Thailand
Tajikistan
Tokelau
Turkmenistan
Tunisia
Tonga
TT
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania, United Republic of
Ukraine
Uganda
United States Minor Outlying
Islands
United States
Uruguay
TV
TW
TZ
UA
UG
UM
SJ
SK
SL
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
TG
TH
TJ
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Uzbekistan
Vatican City State (Holy See)
Saint Vincent and the Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (U.S.)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
Seychelles
Sudan
TK
TM
TN
TO
TP
TR
Zambia
Zaire
Zimbabwe
SC
SD
East Timor
Turkey
DVD OPTICAL DIGITAL OUT Signals
DIGITAL AUDIO
OUTPUT
Output Signals
Playback disc
DVD Video
STREAM/PCM
DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
PCM ONLY
with 48 kHz, 16/20/24 bit
Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS
Dolby Digital bitstream
DTS bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
DVD Audio
48 kHz, 16 bit Linear PCM
with 48/96/192 kHz,
16/20/24 bit Linear PCM
with 44.1/88.2/176.4 kHz,
16/20/24 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
with Dolby Digital
with DTS
Dolby Digital bitstream
DTS bitstream
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream 44.1 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
SVCD, VCD, CD
CD with DTS
MP3/WMA disc
*While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD
OPTICAL DIGITAL OUT terminal if the discs are not copy-protected.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Specifications
Power requirement: AC 110 V / AC 127 V /
AC 220 V– AC 230 V
,
Amplifier section
Output Power:
(adjustable with the voltage selector),
50 Hz/60 Hz
HIGH:
40 W (20 W+ 20 W) at 4 Ω (10% THD)
Power consumption: 90 W (at operation)
50 W (25 W+ 25 W) at 4 Ω (10% MAX)
40 W (20 W+ 20 W) at 4 Ω (10% THD)
50 W (25 W+ 25 W) at 4 Ω (10% MAX)
12 W (on standby)
5.3 W (with deactivating the clock
indication)
LOW:
Dimensions (approx.):175 mm x 237 mm x 375 mm
(W/H/D)
Analog input:
AUX:
Sensitivity/Impedance (at 1 kHz)
400 mV/47 kΩ (at “AUX LEVEL 1”)
200 mV/47 kΩ (at “AUX LEVEL 2”)
Mass (approx.):
7.5 kg
Supplied Accessories
See page 3.
Digital output:
DVD OPTICAL DIGITAL OUT:
–21 dBm to –15 dBm (660 nm 30 nm)
Speakers
Type:
Speaker Systems:
2-Way Bass-reflex type
Woofer: 10 cm cone x 1
Tweeter: 4 cm cone x 1
VIDEO OUT:
Color system:NTSC
VIDEO (composite):
S-VIDEO: Y (luminance)
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
Power handling capacity: HIGH: 20 W
LOW: 20 W
Impedance:
C (chrominance, burst)
HIGH: 4 Ω
LOW: 4 Ω
56 Hz – 40 000 Hz
84 dB/W•m
145 mm x 236 mm x 205 mm
(W/H/D)
2.3 kg each
0.286 V(p-p)/75 Ω
COMPONENT: (Interlace/Progressive):
Frequency range:
Sound pressure level:
Dimensions (approx.):
(Y)
(PB/PR)
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
Speaker Terminals:
4 Ω – 16 Ω
Mass (approx.):
Others:
Design and specifications are subject to change without
notice.
AV COMPU LINK x 2 (φ 3.5)
Tuner section
FM tuning range:
AM tuning range:
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by
87.5 MHz – 108.0 MHz
531 kHz – 1 710 kHz (at 9 kHz)
530 kHz – 1 710 kHz (at 10 kHz)
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation.
Disc player section
Playable disc: DVD Video/DVD Audio/CD/VCD/SVCD
CD-R/CD-RW (recorded in Audio CD/
Video CD/ Super Video CD/ MP3/ WMA/
JPEG format)
Reverse engineering or disassembly is prohibited.
DVD-R/DVD-RW (recorded in video
format)
Dynamic range:
90 dB
Horizontal resolution: 500 lines
Wow and flutter:
Immeasurable
MP3 recording format: MPEG 1/2 Audio Layer 3
Max. Bit rate:
320 kbps
Cassette deck section
Frequency response
Normal (type I):
Wow and flutter:
50 Hz – 14 000 Hz
0.15% (WRMS)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A.,
Canada, Australia, and U.K.)
N
O P E
S H
P U
E
S
R
E
E V
R
O
T
U
A
VIDEO
VOLTAGE
SELECTOR
S-VIDEO
LOW
HIGH
VO
SELEC
LT
AG
E
TO
R
220V—
230V
127V
110V
127V
1
10V
CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position
of the voltage selector switch provided on the outside of this equipment and, if different, reset the
voltage selector switch, to prevent from a damage or risk of fire/electric shock.
VICTOR COMPANY OF JAPAN, LIMITED
EN
0404AIMMDWJEM
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|