JVC Speaker System SX XDC33 User Manual

Home Cinema DD Speaker System  
Sistema di diffusione DD per Home Cinema  
Hembio DD-högtalarsystem  
Hjemmebiograf DD-højttalersystem  
Kotiteatterin DD-kaiutinjärjestelmä  
Heimkino-DD-Lautsprechersystem  
Système denceinte Home cinéma DD  
DD-luidsprekersysteem voor uw huisbioscoop  
Sistema de altavoces DD de cine en casa  
Consists of SX-XDS33 and SX-XDC33  
SX-XD33  
Bestehend aus SX-XDS33 und SX-XDC33  
Se compose de SX-XDS33 et SX-XDC33  
Bestaat uit SX-XDS33 en SX-XDC33  
Consta de SX-XDS33 y SX-XDC33  
Limpianto è formato da SX-XDS33 e SX-XDC33  
Består av SX-XDS33 och SX-XDC33  
Består af SX-XDS33 og SX-XDC33  
Sisältää seuraavat osat: SX-XDS33 ja SX-XDC33  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL D’INSTRUCTIONS  
GEBRUIKSAANWIJZING  
MANUAL DE INSTRUCCIONES  
ISTRUZIONI  
For Customer Use:  
Enter below the Model No. and Serial  
No. which are located either on the rear,  
bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
RUKSANVISNING  
VEJLEDNING  
KÄYTTÖOHJE  
LVT0953-001A  
[E]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the supplied Accessories  
Check to be sure you have the following supplied accessories.  
The number in parenthesis indicates the quantity of the piece  
supplied.  
Warnings, Cautions and Others ........................................ 2  
Assembly ........................................................................... 4  
Additional information ........................................................ 7  
Specifications .................................................................... 8  
Speaker cords  
Approx. 6 m (3: for satellite speakers placed in front  
position and a center speaker)  
Approx. 15 m (2: for satellite speakers placed in rear  
position)  
Warnungen, Vorsichtshinweise usw................................... 9  
Zusammenbau ................................................................ 10  
Zusätzliche Informationen ............................................... 13  
Technische Daten ............................................................ 14  
Screws  
(M5 x 12 mm) (4)  
(M4 x 25 mm) (12)  
Avertissements, précautions et autres ............................ 15  
Montage .......................................................................... 16  
Informations complémentaires ........................................ 19  
Spécifications .................................................................. 20  
Washers  
(4)  
If any of the items above are missing, contact your dealer  
immediately.  
Waarschuwingen en andere aandachtspunten ............... 21  
Monteren ......................................................................... 22  
Extra informatie ............................................................... 25  
Specificaties .................................................................... 26  
Speaker and Speaker cords—  
to improve the sound quality  
About DD (Direct Drive) speaker  
Advertencias, precauciones y notas................................ 27  
Montaje............................................................................ 28  
Información adicional....................................................... 31  
Especificaciones.............................................................. 32  
DD (Direct Drive) technology improves sound localization  
and transmits the powerful sounds.  
About the OFC cord  
The core wires of the supplied speaker cords are made of  
OFC (Oxygen Free Copper). This OFC cord enables high  
quality sound reproduction.  
Avvertenze, Precauzioni e Altro ...................................... 33  
Collegamenti ................................................................... 34  
Ulteriori informazioni........................................................ 37  
Dati caratteristici .............................................................. 38  
When connecting the speaker cords  
Make sure to match the polarity (ª and ·); otherwise, the  
sound will lose the surround effect.  
After connecting, check that the exposed cores are fully  
inserted into the terminal.  
When using other speaker cords  
Observe the following;  
Buy thick speaker cords rather than thin cords, and make  
them as short as possible for connection.  
Use speaker cords of the same length for both left and  
right speakers.  
Varningar, försiktighetsåtgärder m.m............................... 39  
Montering ........................................................................ 40  
Ytterligare information ..................................................... 43  
Specifikation .................................................................... 44  
Do not use long speaker cords; otherwise, the sound  
quality may deteriorate.  
Advarsler, forsigtighedsregler og andet ........................... 45  
Samling ........................................................................... 46  
Yderligere oplysninger..................................................... 49  
Specifikation .................................................................... 50  
Varoituksia, huomautuksia ym. ........................................ 51  
Kokoaminen..................................................................... 52  
Lisätietoja ........................................................................ 55  
Tekniset tiedot ................................................................. 56  
3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Assembling the satellite speakers  
2 Join the leg to the stand.  
Each speaker (except the center speaker) has been divided into  
three parts for shipment. Before using this speaker system,  
assemble it first by following the procedure below.  
Rotate either the leg or stand so that the  
mark on the  
leg and the  
direction.  
mark on the stand are facing the same  
Make sure to match the screw holes on the leg with those  
on the stand so that they are aligned correctly.  
mark  
Leg  
Speaker  
section  
Leg  
Stand  
Stand  
Prepare a Phillips screw driver.  
Before assembling—  
Take care not to drop the stand while assembling;  
otherwise, it may cause damage to the floor or injury.  
Ensure enough space for assembly and installation.  
Place a large, thick cloth on the floor where you  
assemble the speaker, so you can protect the floor and  
the speaker itself.  
mark  
3 Fix the leg to the stand with three of the  
supplied screws (long: M4 x 25 mm).  
Use the speaker only after assembly is fully and correctly  
done.  
Leg  
Attaching the leg and the stand  
Stand  
1 Remove the terminal cover from the leg.  
First remove the screw on the terminal cover, then detach  
the cover by pulling it upward.  
You will need to use the removed screw in step 5 on page  
5.  
Terminal  
cover  
Screw  
Do not tighten each screw completely as you put them in  
place.  
First put all screws in, then tighten them evenly and firmly.  
Screw  
claws  
grooves  
It is recommended to place a cushion under the leg.  
You can tighten the screws easily by placing the leg  
horizontally.  
Leg  
Cushion  
4 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3)Insert the speaker cord into the speaker terminal  
inside the leg.  
4 Connect the speaker cord to the speaker  
terminal of the leg  
1 Press and hold the clamp.  
2 Insert the exposed core of the speaker cord fully  
into the terminal.  
Use the 6-meter speaker cords for front speakers and  
15-meter speaker cord for rear speakers.  
Each speaker cord has its name tag attached to one end.  
Attach the end without the name tag to the speaker  
terminal.  
Connect the cord with the black stripe to the ·  
terminal.  
3 Release your finger.  
Tag  
1
2
3
To the speaker  
terminal of the leg  
1)Insert the speaker cord inside the stand as illustrated  
below.  
Pull the speaker cord out of the center of the stand by  
about 50 cm.  
Leg  
The cord with the  
black stripe is on this  
side, facing up.  
The cord with  
the black stripe.  
5 Attach the terminal cover to the leg.  
Push cords fully inside the leg. Then fix the terminal cover  
using the screw you removed in step 1.  
Stand  
2)Insert the tips of the speaker cord into the leg and pull  
Terminal  
cover  
them out as illustrated below.  
Screw  
Leg  
claws  
grooves  
To be continued on the next page  
5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly (continued)  
Joining the leg and the speaker unit  
7 Join the speaker section and the leg.  
Insert the speaker section to the leg, then fix the speaker  
section and the leg with one of the washers and one of the  
supplied screws (short: M5 x 12 mm).  
6 Insert the speaker cord into the speaker  
terminal inside the leg.  
1 Press and hold the clamp.  
2 Insert the exposed core of the speaker  
Speaker  
section  
cord fully into the terminal.  
Joint here  
without gap.  
Connect the cord with black stripe to the ·  
Push cords fully  
inside the leg before  
attaching the  
terminal.  
3 Release your finger.  
speaker section.  
1
2
3
Screw  
Leg  
Washer  
Repeat the procedure from step 1 to assemble the other  
satellite speakers.  
Leg  
Speaker  
section  
The cord with  
the black stripe.  
For disassembly:  
Reverse Assembly procedure:  
1) Remove the speaker section from the leg.  
2) Remove the leg from the stand.  
6 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Connecting the Center speaker  
Connecting the speaker system to the amplifier  
To connect the center speaker, use the same type of speaker  
cord (6 m; tagged with FRONT SPEAKER) as used for  
connecting the front speakers.  
Before connecting—  
Turn off the power to the amplifier before connecting the  
speaker system; otherwise, the speakers may be damaged.  
The impedance of each speaker is 8 . Before connecting  
them to your amplifier, check the speaker impedance range of  
your amplifier. If the impedance of this speaker is out of the  
speaker impedance range indicated on the amplifier, you  
cannot connect this system to the amplifier.  
The maximum power handling capacity of the SX-XD33 is  
100 W. Excessive input will result in abnormal noise and  
possible damage.  
Each speaker cord has its name tag attached to one end.  
Attach the end without the name tag to the speaker terminal.  
Insert the speaker cord into the speaker  
terminal.  
1 Press and hold the clamp.  
2 Insert the exposed core of the speaker  
cord fully into the terminal.  
Be sure to turn down the volume level to prevent unwanted  
noise before performing following operations:  
Turning on or off other components,  
Connect the cord with the black stripe to the ·  
terminal.  
3 Release your finger.  
Operating the amplifier,  
Tuning FM stations,  
Fast-forwarding a tape,  
1
2
Continuously reproducing high frequency oscillation or high  
pitch electronic sounds.  
3
When using a microphone, do not aim it at the speakers or  
use it near the speakers; otherwise, the howling which occurs  
may damage the speakers.  
Before replacing the cartridge, always turn off the power to the  
turntable; otherwise, the clicking noise may damage the  
speakers.  
Typical connection method to an amplifier  
Connect the speakers to a SPEAKERterminal of the amplifier  
with the speaker cords by referring to the diagram below.  
Make sure to match the polarity (ª and ·) when connecting  
the speaker cords.  
The cord with the  
black stripe.  
The diagram below is an example of a typical connection  
method.  
Front right  
speaker  
Front left  
speaker  
Center speaker  
(Approx. 6 m)  
(Approx. 6 m)  
(Approx. 6 m)  
RIGHT  
LEFT  
RIGHT  
LEFT  
REAR  
FRONT  
SPEAKERS  
CENTER  
SPEAKER  
SPEAKERS  
Rear right  
speaker  
Rear left  
speaker  
Make sure to match the polarity (ª and ·); otherwise, the  
sound will lose the surround effect.  
After connecting, check that the exposed cores are fully  
inserted into the terminal.  
CAUTION:  
SPEAKER  
IMPEDANCE  
8
16  
Speaker terminals  
on the amplifier  
(Approx. 15 m)  
(Approx. 15 m)  
7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information (continued)  
General layout of speakers  
Place all speakers at the same distance from the listening position if possible.  
Usually place the center speaker close to the TV.  
When you place the center speaker on a TV, make sure the surface is level and stable.  
Front left  
speaker  
Front right  
speaker  
Subwoofer  
Center  
speaker  
Listening position  
Rear left  
speaker  
Rear right  
speaker  
For a subwoofer to be used with SX-XD33, it is recommended  
to use SX-DW303. This combination gives you the best  
possible high quality surround sounds.  
Do not lean against the speakers, as the speakers could fall  
down or break, possibly causing an injury. Especially be  
careful that children do not lean against them.  
Specification  
SX-XDS33 (Satellite speaker)  
SX-XDC33 (Center speaker)  
Type :  
1-way 2-speaker  
Bass reflex type, magnetically  
shielded type  
Type :  
1-way 2-speaker  
Bass reflex type, magnetically  
shielded type  
Speaker unit :  
Frequency range :  
Input impedance :  
Direct drive (9.5 cm × 1 cm) × 2  
120 Hz to 20 000 Hz  
8 Ω  
Speaker unit :  
Frequency range :  
Input impedance :  
5.5 cm cone × 2  
80 Hz to 20 000 Hz  
8 Ω  
Power handling Capacity :  
Sound pressure level :  
Dimensions (approx.) :  
100 W  
Power handling Capacity :  
Sound pressure level :  
Dimensions (approx.) :  
100 W  
82 dB/Wm  
81 dB/Wm  
282 mm (width) × 1108 mm  
(height) × 282 mm (depth)  
3.0 kg each  
200 mm (width) × 78 mm  
(height) × 120 mm (depth)  
0.85 kg  
Mass (approx.) :  
Mass (approx.) :  
8 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
EN, GE, FR, NL, SP, IT, SW, DA, FI  
© 2002 VICTOR COMPANY OF JAPAN, LIMITED  
0702NSMMDWJSC  
Download from Www.Somanuals.com. All Manuals Search And Download.  

InFocus Network Card LP225 User Manual
Intel Computer Hardware PT800DB User Manual
Jensen Car Video System VM8013 User Manual
Jensen Car Video System VM8023HD User Manual
Jensen Stereo Amplifier A222HLX User Manual
Jet Tools Saw HBS 56S User Manual
JVC Exercise Bike CU V602J User Manual
Kenmore Air Conditioner 580 72089 User Manual
Klipsch Speaker IC 400 T User Manual
Konica Minolta GPS Receiver NS NAV02R GPS User Manual