COLOR DOME CAMERA
INSTRUCTIONS
(B)
TK-C553
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No.
Serial No.
TK-C553
SC96896H-001
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Follow all warnings and instructions marked on the appliance.
14. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
15. Never push objects of any kind into this appliance through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the appliance.
16. Do not attempt to service this appliance yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
17. Unplug this appliance from the wall outlet and refer servicing to qualified service person-
nel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions. Ad-
just only those controls that are covered by the operating instructions as improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f. When the appliance exhibits a distinct change in performance - this indicates a need
for service.
18. When replacement parts are required, be sure the service technician has used replace-
ment parts specified by the manufacturer that have the same characteristics as the origi-
nal part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
19. Upon completion of any service or repairs to this appliance, ask the service technician to
perform routine safety checks to determine that the appliance is in safe operating
condition.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.
FOR USA AND CANADA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THISAPPLIANCE TO RAIN
OR MOISTURE.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
I N S I D E . R E F E R S E RV I C I N G T O
QUALIFIED SERVICE PERSONNEL.
AVERTISSEMENT:
The lightning flash wish arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the pres-
ence of uninsulated "dangerous volt-
age" within the product's enclosure that
may be of sufficient magnitude to con-
stitute a risk of electric shock to per-
sons.
POUR EVITER LES RISQUES
D’INCENDIE OU D’ELECTRO-
CUTION, NE PAS EXPOSER
L’APPAREILA L’HUMIDITE OU A LA
PLUIE.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important op-
erating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with
Canadian ICES-003.
Information for USA
This device complies with part 15 of the FCC Rules.
Changes or modifications not approved by JVC could
void the user’s authority to operate the equipment.
Cet appareil numérique de la Class B est
conforme á la norme NMB-003 du Canada.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing this product.
(These instrustions are for TK-C553U and TK-C553E)
CONTENTS
Features ...............................................................................................................................6
Operating Precautions .........................................................................................................6
Safety Precautions...............................................................................................................7
Controls, Connectors and Indicators
Camera Body ........................................................................................................ 8
Ceiling Mount ...................................................................................................... 11
SYSTEM
System with Remote Control Unit RM-P2580 ...................................................................12
INSTALLATION
Connections to Camera Terminal Board ...........................................................................15
Ceiling Installation .............................................................................................................17
Adjusting the Camera Angle..............................................................................................19
Connection for Adjustment of the Camera ........................................................................21
SETUP MENU
SETUP MENU Flow...........................................................................................................22
Menu Settings Using the Operation Buttons on the Camera Body ..................................24
Menu Settings Using the RM-P2580 .................................................................................25
SETUP MENU Screen.......................................................................................................26
VIDEO ADJUSTMENT Screen..........................................................................................27
MODE SELECT Screen ....................................................................................................29
COMMUNICATION Screen ...............................................................................................30
FUNCTION Screen............................................................................................................31
BLC (Back Light Compensation) Adjustment....................................................................32
Fixed Light Metering Areas ................................................................................................32
User Settable Light Metering Areas ...................................................................................33
Manual Adjustment of White Balance ...............................................................................33
AWC (One-Push Auto White Balance) Adjustment ...........................................................35
CAMERA TEXT Setting .....................................................................................................36
AUTO START DEMO .........................................................................................................38
POSITION TEXT Setting ...................................................................................................39
AUTO PATROL Setting ......................................................................................................41
SPECIFICATIONS .............................................................................................................43
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Operating Precautions
● To save energy, when it is not being used
turn the system’s power off.
Ⅲ Color Dome Camera with integrated
variable-focal-length lens and camera.
Ⅲ Backlight compensation function
provided. Enables improvement of video
image shot with backlit conditions.
Ⅲ Employment of TTL automatic tracking
white balance allows use under various
light source conditions.
● This camera has been designed for indoor
use. It cannot be used outdoors.
● This camera has been designed
exclusively to be hung from the ceiling.It
may malfunction if it is placed on a surface
or if it is tilted.
● Do not install or use the camera in the
following places.
Ⅲ One-push auto white balance (AWC)
function.
• In a place exposed to rain or moisture.
• In a place with vapor or oil soot, for
example in a kitchen.
• In a temperature outside the operating
temperature range (–10°C to 50°C).
• Near a source of radiation, X-rays, strong
radio waves or magnetism.
Ⅲ Control possible via external control
signal conforming to the EIA/TIA RS-
422A or RS-485 standard. The unit can
be controlled using the JVC Remote
Control Unit RM-P2580.
Ⅲ Setup menus can be set using buttons
on the camera body or by external control
signal.
• In a place subject to vibration.
• In a place with excessive dirt.
Ⅲ Auto panning and tilting, auto scrolling
and auto patrol possible.
Ⅲ Up to 6 position settings per camera.
Ⅲ Setting of camera text and position text
possible.
● If this camera and the cables connected
to this camera are used where there are
strong electromagnetic waves or where
there is magnetism present, for example
near a radio or TV transmitter, power
transformer or an electric motor, the picture
may produce noise and the colors may be
affected.
Ⅲ Digital zoom enables up to 2× zoom.
● This camera incorporates an AGC circuit.
As a result, when it is used under low light
conditions, the camera sensitivity is
automatically boosted and the picture may
look uneven. This is not a malfunction
however.
● The white balance setting when used
under a fluorescent lamp should be ATW
(Auto White).
● When this camera is used in the ATW
mode, the recorded colors may be slightly
different from the actual colors due to the
operational principles of the auto-tracking
white balance circuit. This is however not
a malfunction.
Ⅲ Before starting an important recording,
be sure to perform a test recording in
order to confirm that a normal recording
is possible.
Ⅲ We do not accept liability for the loss of
a recording in the case of it becoming
impossible to record due to a problem
in the video camera, VCR or video tape.
Ⅲ We do not accept liability for any
damage to the camera in cases when
it is dropped because of incomplete
installation due to not observing the
installation instructions correctly.
Please be careful when installing the
camera.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
● If a high-intensity object (such as a lamp)
is shot, the image on the screen may have
vertical lines (smear) or blur (blooming) at
its periphery. This is a characteristic of the
CCD, and is not a defect.
● Resolution decreases as the digital zoom
ratio is increased.
● Do not touch the dome cover of the lens
directly with your hand, contamination of
this cover will lead to a deterioration of the
picture quality.
● Observe the following when carrying out
camera maintenance.
• Turn the power OFF before proceeding
to carry out maintenance.
• Clean the dome cover lens using a lens
wiper cloth (or a tissue).
• Installation of this unit requires expertise.
Please contact your dealer for details.
• The ceiling to mount the TK-C553 has to
be strong enough to support ten times the
weight of this product.
If the ceiling is not strong enough, make
sure to apply reinforcement to the ceiling
before installation.
• Be sure to tighten the screws and nuts se-
curely, Insufficient tightening may cause the
unit to fall from its mount.
• The unit is to be powered by a DC 12 V or
an AC 24 V power supply.
The AC 24 V power supply should conform
to the following:
Isolated power supply only (E type)
Class 2 only (U type)
If it is contaminated seriously, clean the
contaminated part with a cloth (or a tissue)
which has been soaked in a solution of
water and a neutral detergent.
Precautions for Use with the RM-P2580
• The focus button will be inoperative.
• The Pan/Tilt speed becomes as shown in
the following table.
RM-P2580 P/T SPEED
TK-C553 operation
2
2
4
4
6
4
8
4
• During auto pan operation, the PAN/TILT
and ZOOM buttons remain inoperative.
• The auto pan start/stop positions cannot be
set.
• Auto patrol works.
੬ See page 41.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Connectors and Indicators
Camera Body
Ⅲ Body Surface
View when the dome cover is removed.
1
MONITOR
2
NOT USED
NOT USED
L/L
ON
INT
OFF
TERMINATION
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
7
6
5
3
4
1
5
MONITOR terminal (RCA pin)
Operation buttons
For connecting a monitor when determin-
ing camera angle, etc. (High impedance)
LEFT/RIGHT/UP/DOWN
Used to move the cursor on the SETUP
MENU screens and for changing set
values.
2
3
Camera head
Horizontal LOCK screw
AWC
When adjusting the camera angles
horizontal rotation, this screw is loosened
for adjustment and tightened to maintain
the angle.
Press for about 1 second to activate the
one-push auto white balance. Even if the
color temperature changes later on, the
white balance does not adjust to the
change.
4
Camera clamp
Fix the camera body to the ceiling mount
by fastening the camera clamping screw
of the ceiling mount to this clamp.
6
SET button
Press to display and close the setup
screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
7
DIP switch
Ⅲ Video synchronization selector
switch
Switches the synchronization method of
the camera image.
INT: Internal synchronization
L/L: The camera’s vertical synchroniza-
tion is matched with the frequency
of the AC 24 V line power supply.
When switching between multiple cam-
eras using a switcher, selecting the LL
mode and adjusting the vertical phase
can reduce the monitor sync distur-
bances occurring when the camera im-
age is switched.
Ⅲ Control signal termination ON/OFF
switch
This is a termination ON/OFF switch
between the “RX+” and “RX–” control
signal connection terminals.
ON: The “RX+” to “RX–” route is
terminated by a 110-Ω resistor.
OFF: The RX+ to RX– route is not
terminated.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Connectors and Indicators
Camera Body
Ⅲ Body Underside
(Condition with terminal board attached.)
15
11
12
13
13
10
14
9
8
13
8
9
11
Terminal board
DC 12 V / AC 24 V input terminals
To connect the coaxial cable used as the
video signal cable, the power cable,
control signal cable, etc.
To input DC 12 V or AC 24 V power.
The AC 24 V power supply should
conform to the following:
(੬ See page 15)
U-type: Class 2 only
Video output terminal
E-type: Isolated power supply only
Terminal board cover
Outputs composite video signals (1 V
(p-p), output impedance 75Ω).
Should be connected to video input
terminal on monitor, switcher, or remote
control unit.
12
13
14
15
Protects the cable connection terminals
from dirt, etc.
Camera body mounting guides (× 3)
To be inserted into the guide holes of the
ceiling mount.
10
Control signal connection terminals
Terminals for inputting signals with
electrical characteristics conforming to
the EIA/TIA RS-422A or RS-485 standard.
Connected to the optional Remote
Control Unit RM-P2580, etc.
Drop prevention wire hook
Attach the drop prevention wire to this
hook.
Camera positioning alignment mark
When mounting the camera onto the
ceiling mount, align this mark with the
mark on the mount.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceiling Mount
17
16
16
17
19
16
16
17
20
18
16 Mounting holes (
4)
×
Use these holes to attach the ceiling
mount to the ceiling.
17 Guide holes for mounting camera (× 3)
Guide holes for mounting the camera.
13
The camera body mounting guides
are inserted into these holes.
Camera clamping screw
18
19
To hold the camera in place, be sure to
use this screw to lock the camera clamp
4
.
Camera positioning alignment mark
Positioning mark for when the camera
body is attached.
20 Drop prevention wire hook
Attach this wire to the drop prevention
14
wire hook
on the camera body.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
System with Remote Control Unit RM-P2580
System with up to 8 cameras. (Six position settings available for each camera.)
COLOR DOME CAMERA
TK-C553
Control signal cable
CAMERA 1
Video signal cable
AC24V
Power cable
CAMERA ID:01
TERMINATION:OFF
COLOR DOME CAMERA
TK-C553
CAMERA 2
AC24V
AC24V
CAMERA ID:02
TERMINATION:OFF
COLOR DOME CAMERA
TK-C553
CAMERA 8
MONITOR
Time lapse VCR
CAMERA ID:08
TERMINATION:ON
CAM SW
OUT
SR-L910E
R
E
C
S
T
O
P
/
E
J
E
C
T
REC
CHECK
OPERATE
VIDEO CASSETTE RECORDER
PAUSE/
STILL
OPE. LOCK
REVERSE
PLAY
COUNT/
CLOCK
SHIFT/TRACKING
RESET
/CANCEL
MENU
REW
FF
TIME
MODE
TIMER
REC
SET/V.LOCK
AL/PL
RESET
P
A
L
VIDEO IN
CAMERA
SW
TO
CAMERA
COM
MONITOR
TO CAMERA
RX+＋R �X+＋T�
DATA
I
/
O
UNIT
�
X
-
－T
X
-
－�
COM
1
2
3
4
5
6
7
8
COM 9/1 10/2 11/3 12/4 13/5 14/6 15/7 16/8 COM AUTO ALARM COMCASMWERACOM
SERIAL-1
SERIAL-2
POWER
OFF
ON
Remote Control Unit
RM-P2580
VIDEO INPUT
1
1
2
3
3
4
4
5
6
6
7
7
8
8
MONITOR
OUTPUT 2
MONITOR MONITOR
OUTPUT OUTPUT
AC～�INPUT
1
2
1
2
3
4
5
6
7
8
2
5
ON
VIDEO OUTPUT
MONITOR
OUTPUT 1
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DC 12 V or AC 24 V
power cable
Lug plates
To DC 12 V or AC 24 V power supply
Control signal cable
To Remote Control Unit (RM-P2580)
RX+ C
A TX+
RX– D
B TX–
To Remote Control Unit (RM-P2580)
Video
signal cable
Terminal board
• Turn OFF the power supply to all equipment to be used before making connections.
• Read the Instruction Manual for each piece of equipment to be used before making
connections.
• The control signal cable cannot be used for loop connection.
Connecting the control signal cable
(Use a twisted-pair cable for connection. ੬ See page 16.)
Camera 1 terminal board
RM-P2580
TX+ A
TX– B
RX+ C
RX+ A
RX– B
TX+ C
TX– D
RX– D
Camera 2 terminal board
Connect:
TX+ A
TX– B
RX+ C
RX– D
Camera TX+ to RM-P2580 RX+
Camera TX– to RM-P2580 RX–
Camera RX+ to RM-P2580 TX+
Camera RX– to RM-P2580 TX–
Camera 3 terminal board
The A B C D marks indicated on both the camera
terminals and the RM-P2580 terminals facilitate correct
connections. Connect the terminals with identical
marks.
TX+ A
TX– B
RX+ C
RX– D
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM
System with Remote Control Unit RM-P2580
• Settings on the FUNCTION menu are
Settings
Ⅲ CAMERA FACE
performed using the operation buttons
on the RM-P2580. They cannot be
made using the operation buttons on
the camera body.
• Make settings on other menus as
required.
MONITOR
MEMO
INT
OFF
LL
ON
NOT USED
NOT ED
L/L
ON
INT
OFF
TERMINATION
When operating a system using the RM-
P2580, several cameras (up to 16) can be
connected and used on one control signal
cable. Consequently, an incorrect switch
setting on just a single camera will cause
the entire system to work incorrectly.
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
TERMINATION
•
•
Video synchronization selector switch
(INT/LL)
Set to LL (Line Lock) on all cameras, and
align V.PHASE.
(੬ See page 29.)
Control signal termination ON/OFF switch
(TERMINATION OFF/ON)
Set this to ON only on the camera placed
at the end of the control signal cable.
Set to OFF on all other cameras.
•
Confirm switch settings on the screen
as follows.
q Confirm that the image from the camera
to be checked is displayed on the monitor.
w Turn OFF and then ON the power to the
camera to be checked.
e When the STYLE item is MULTIDROP,
characters similar to those shown in the
figure below are displayed for about 5
seconds. They do not appear in the case
of POINT to POINT.
r Confirm that “DUPLEX” and “ID-MM” are
displayed and that the ID number is the
correct number (the number should be the
same as the number of the VIDEO INPUT
terminal to which the camera is connected
on the rear panel of the RM-P2580).
t If wrong, set the MODE item, STYLE item
and camera ID again.
Menu Screen Settings
Ⅲ COMMUNICATION menu screen
• MODE item: Set to DUPLEX
• STYLE item: Set to MULTIDROP
• ID item: Set the camera ID.
For each camera, match the ID with the
VIDEO INPUT number of the RM-
P2580.
* Settings on the COMMUNICATION
menu screen are performed using the
operation buttons on the front section
of the camera.
MONITOR screen
Monitor screen (example showing camera ID as “05”)
MEMO
Following selection of MEMORY, the settings
on the COMMUNICATION menu will not be
valid before the power has been turned on
again.
P RO TO CO L : D U P L E X I D - 0 5
Ⅲ FUNCTION menu screen
Screen for making settings related to the
Auto Patrol and Auto Pan functions and
display of text.
“DUPLEX” should be
displayed.
The number shown in
the MM part of ID-
MMshould be correct.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connections to Camera Terminal Board
• Turn OFF the power supply to all components before making connections.
Connections to Terminal Board
Remove the terminal board cover and con-
nect the video signal cable (coaxial cable)
(× 1).
Remove the terminal board
cover by flipping it up while
pushing its top to the left.
Connect the DC 12 V orAC 24 V power cables
(× 2).
In a system where the Remote Control Unit
(RM-P2580), etc. is used, connect the con-
trol signal cables (× 4).
Ⅲ DC 12 V or AC 24 V power supply cable
Connect the DC 12 V or the AC 24 V power
supply to the DC 12V/AC 24V terminals on
the terminal board. To prevent connection
DC 12 V or AC 24 V
power cable
errors or a cable disconnection, we recom-
mend the use of lug plates for the connec-
tions.
The following table shows the connection dis-
tances and connection cables provided that
2-conductor VVF cables (vinyl-insulated vi-
nyl sheath cables) are used.
Lug plates
To DC 12 V or AC
24 V power supply
Control signal cable
RX+ C
A TX+
To Remote Control
Unit (RM-P2580)
RX– D
B TX–
To Remote Control Unit
(RM-P2580)
Maximum extension
Video
100 m 260 m 410 m 500 m
(reference)
signal cable
Terminal board
Conductor
diameter
1.0
∅mm 1.6∅mm 2.0∅mm 2.6∅mm
and more and more and more and more
CAUTION:
• Do not allow input from both a DC 12 V
and AC 24 V power supply at the same
time.
• When using a DC 12 V power supply,
ensure that the polarities of the cable are
correct.
• The AC 24 V power supply should con-
form to the following:
U-type: Class 2 only
• If thin cables are used (i.e. with a high
resistance), a significant voltage drop
will occur when the unit is at its
maximum power consumption. Either
use a thick cable to restrict the voltage
drop at the camera side to below 10%,
or place the power supply near to the
camera. If voltage drop occurs during
operation, the performance will be
unstable.
E-type: Isolated power supply only
• Attach the cable conductors so that they
do not come into contact with the drop
prevention wires.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connections to Camera Terminal Board (Continued)
Ⅲ Video signal cables
Connect the coaxial cables to the video
Polyethylene
Core
Meshed wire
signal output terminals. Treat the tips of
the coaxial cables as shown on the left
before connection.
conductor
12mm
6mm
Note
Fold the meshed wire back.
Use the 3C-2V or 5C-2V video signal
cable (coaxial cable). The 7C-2V
cannot be used.
Ⅲ Control signal cables
These cables should be connected only
when it is required to control the cam-
era using the RS-442A or RS-485 sig-
nals. The use of 0.65 4-conductor
twisted pair cables is recommended.
With these cables, the maximum exten-
sion distance is 1,200 m.
Connect to the
other side in
pairs like this.
A TX+
B TX-
Connect to the
other side in
pairs like this.
C RX+
D RX-
After having connected all of the re-
quired cables, again attach the termi-
nal board cover.
Forgetting to attach the terminal board
cover could result in accidents or
injuries.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceiling Installation
1. Make a hole (75 mm diameter) in the
ceiling for passing the connection
cables, and attach the provided ceiling
mount to the ceiling.
1.
75
φ
Ceiling mount
bracket
Coincide the center of the mount with
the hole (75 mm diameter) for passing
the cables through the ceiling. Attach the
ceiling mount to the ceiling using 4
screws.
Pass the wired terminal board through
the hole in the center of the ceiling
mount and leave if hanging down.
• Use M4 screws or bolts for attaching
the ceiling mount.
• If wood screws are used, use screws
with a diameter of 4.1 mm.
• The screw head height should be no
Screws
Tab
Screws
2.
Tab
more than 4 mm.
2. Attach the wired terminal board to the
camera.
Guide
Connector
1) Slide the tab on the terminal board
into the guide on the camera. When
the terminal board is moved in the
direction of the arrow, it is secured to
the camera.
Connector
cable
Guide
2) Connect the connector cable from
the camera body to the connector on
the terminal board.
3. Attach the drop prevention wire.
As shown in the illustration, pull the drop
prevention wire out from the ceiling
mount and attach it to the drop preven-
tion wire hook on the underside of the
camera body.
3.
Drop prevention wire
CAUTION
Be sure to attach the drop prevention wire.
If not attached, the camera body could
drop down.
Drop prevention
wire hook
17
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Ceiling Installation (Continued)
4. Mount the camera body.
1) Ensure that the camera clamping
screw on the ceiling mount is
loosened.
4.
(2) Position alignment mark
2) Align the camera position alignment
mark on the camera body with the
camera position alignment mark on
the ceiling mount and press the
camera body straight against the
mount.
(1)
Camera clamping
screw
(2) Camera position
alignment mark
(2)
Note
Exercise caution when mounting so as not
to pinch the drop prevention wire and the
connected cables.
3) Rotate the camera body clockwise as
far as it will go.
At this point, check that the camera
body clamp is located on the lock
screw on the ceiling mount.
Clamp
4) Tighten the camera clamping screw.
(3)
CAUTION
Be sure to tighten the camera clamping
screw fully. Otherwise the camera body
may vibrate or drop from the ceiling.
Camera
clamping screw
Rotate the
camera body
clockwise
To dismount the camera from the ceiling,
perform steps 2. to 4. in reverse order.
Camera
clamping screw
(4)
Tighten the camera
clamping screw.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Camera Angle
Remove the dome cover.
Rotate the dome cover counterclockwise and
pull it off.
Ⅲ Horizontal rotation
(adjustable range: 90°)
1. Loosen the horizontal LOCK screw.
Dome
cover
2. Holding the both tilt lock screws, rotate
horizontally.
3. Tighten the horizontal LOCK screw.
Ⅲ Vertical rotation
(adjustable range: 130°)
1. Loosen the tilt lock screws.
Camera head
2. Holding the rotation levers, rotate
MONITOR
vertically.
3. Tighten the tilt lock screws.
NOT USED
NOT USED
L/L
INT
OFF
ON
TERMINATION
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
Ⅲ Image inclination
(adjustable range: 30°)
Manipulate the rotation levers to adjust the
inclination of the image.
Horizontal LOCK
screw
Ⅲ Adjusting the image size
Rotation levers
Adjust the size using the zoom ring.
Ⅲ Adjusting the focus
Adjust using the focus ring.
Zoom ring
Focus ring
When required, the surveillance image
should be adjusted, etc. This adjustment
is performed using the setup screen.
Tilt lock screws
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Adjusting the Camera Angle (Continued)
Attach the dome cover.
Triangle mark
1. Align the notch in the dome cover with
the triangle mark and push the cover
onto the camera body.
2.
2. Rotate the cover clockwise as far as it
will go and is seated firmly.
CAUTION
Notch
1.
Be sure that the dome cover is firmly at-
tached. Improper attachment could result
in the cover dropping down.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection for Adjustment of the Camera
Temporarily used for making various adjustments
while the camera remains in the installed location.
MONITOR
terminal
75Ω termination
disconnected
MONITOR
NOT USED
NOT USED
L/L
ON
INT
OFF
TERMINATION
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
Monitor TV
DIP switch
* The power to the camera body must be ON when adjustments are performed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
SETUP MENU Flow
This unit is provided with a SETUP MENU that allows various settings to be performed on
the screen of a connected monitor using the switches on the camera body. The SETUP
MENU consists of separate layers divided according to function types as shown below.
The setup menus that can be set vary depending on whether the settings are done using the
operation buttons on the camera body or by transmitting commands from an external control
device, such as the JVC RM-P2580.
* Menu setting operation can only be conducted after the operation to display the SETUP
MENU has been performed (using the operation buttons on the camera body or by trans-
mitted commands). (੬ See page 24, 25.)
Ⅲ
SETUP MENU flow when the operation buttons on the camera body are used
੬ See page 26.
੬ See page 27.
– – S E T U P ME N U – –
– – V I D E O A D J U S T – –
V I D E O A D J U S T
MOD E S E L E C T .
COMMU N I C A T I O N .
.
.
.
I R I S L E V E L
CO L OU R L E V E L
E N H A N C E L E V E L
A GC MOD E
NORM A L
NORM A L
NORM A L
2 0 d B
BLC PRESET AREA
screen
.
E N D MEMO R Y
S U P E R A GC
O F F
B L C .
.
O F F
BLC AREA EDIT screen
AWC screen
A V E R A G E : P E A K
WH I T E B A L A NC E
E N D
8
:
2
A T W
MANUAL WHITE
BALANCE
adjustment screen
SETUP MENU SCREEN
VIDEO ADJUST SCREEN
(for setting functions related
to the video image of each
camera)
੬ See page 29.
– – MOD E S E L E C T – –
CAMERA TEXT
setting screen
C AME R A T E X T
V . P H A S E
O F F
1 2 8
O F F
A U T O S T A R T .
E N D
.
AUTO START DEMO
screen
Normal screen
MODE SELECT SCREEN
(for setting the operation mode
of each camera)
੬ See page 30.
– – COMMU N I C A T I ON – –
MOD E
S T Y L E
I D
D U P L E X
P O I N T
P O I N T
t
o
1
E N D
MEMO
The FUNCTION screen is not displayed
when operating the SETUP MENU using
the buttons on the camera body.
COMMUNICATION SCREEN
(for setting the form of connection to the control signal connection terminals
on the camera body, etc. and for setting the communication mode, etc.)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU Flow (Continued)
Ⅲ
SETUP MENU flow when commands are transmitted from the RM-P2580
S E T U P
P O S I
C AME R A .
CON T RO L U N I T
T
I O N S E T U P
.
.
.
.
.
Select the “CAMERA” item.
SETUP menu from remote
control
੬ See page 26.
੬ See page 27.
– – S E T U P ME N U – –
– – V I D E O A D J U S T – –
V I D E O A D J U S T
MOD E S E L E C T .
.
.
.
I R I S L E V E L
CO L OU R L E V E L
E N H A N C E L E V E L
A GC MOD E
NORM A L
NORM A L
NORM A L
2 0 d B
BLC PRESET AREA
screen
F U NC T I O N
E N D
.
.
MEMO R Y
S U P E R A GC
O F F
B L C .
.
O F F
BLC AREA EDIT screen
A V E R A G E : P E A K
WH I T E B A L A NC E
E N D
8
:
2
A T W
AWC screen
MANUAL WHITE
BALANCE
adjustment screen
SETUP MENU SCREEN
VIDEO ADJUST SCREEN
(for setting functions related
to the video image of each
camera)
੬ See page 29.
– – MOD E S E L E C T – –
CAMERA TEXT
setting screen
C AME R A T E X T
V . P H A S E
O F F
1 2 8
O F F
A U T O S T A R T .
E N D
.
AUTO START DEMO
screen
Normal screen
MODE SELECT SCREEN
(for setting the operation mode
of each camera)
੬ See page 31.
– – F U N C T I O N – –
POSITION TEXT
setting screen
P O S I
P O S . T E X T L OC .
A U T O P A T RO L
T
I O N T E X T E D I
T
.
.
U P – L
.
.
AUTO PATROL setting
screen
A U T O P A N MOD E
A L M . T E X T S I Z E
E N D
P A N
DOU B L E
MEMO
The COMMUNICATION screen is not
displayed when the SETUP MENU is set
by means of transmitted commands.
FUNCTION SCREEN
(for settings related to POSITION
TEXT, AUTO PATROL, AUTO PAN
operation, etc.)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
Menu Settings Using the Operation Buttons on the Camera Body
MONITOR
LEFT button
UP button
SET button
NOT USED
NOT USED
L/L
ON
INT
OFF
TERMINATION
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
RIGHT button
DOWN button
Submenu to be followed
1. Press the SET button to display the
SETUP MENU screen on the monitor.
2. Press the UP or DOWN button to align
the cursor (>) with the item to be set.
Then press the SET button.
– – S E T U P ME N U – –
V I D E O A D J U S T .
MOD E S E L E C T .
COMMU N I C A T I O N .
E N D MEMO R Y
.
Cursor
.
.
• The submenu for the selected item
appears.
MEMO
Items followed by “..” are items that
have a submenu.
SETUP MENU screen
3. Press the UP or DOWN button to align
the cursor (>) with the item to be set.
Change mark
4. Press the LEFT or RIGHT button to
Set value
Item
change the set value.
When the set value of an item is
changed, the change mark (9) appears
after the cursor (>).
Ⅲ When items followed by the “..”
indication are selected, press the SET
button.
– – V I D E O A D J U S T – –
I R I S L E V E L
CO L OU R L E V E L
E N H A N C E L E V E L
A GC MOD E
NORM A L
NORM A L
NORM A L
2 0 d B
S U P E R A GC
O F F
O F F
* The selected item’s setting screen
appears.
5. To exit the submenu, press the DOWN
button to align the cursor (>) with END.
Then press the SET button.
B L C .
.
A V E R A G E : P E A K
WH I T E B A L A NC E
E N D
8
:
2
A T W
VIDEO ADJUST screen
• The SETUP MENU screen returns.
Ⅲ To set other submenus, repeat steps
2. to 5.
6. To complete the menu settings, align the
cursor (>) with the END item on the
SETUP MENU and press the LEFT or
RIGHT button to select the way to end
the setting.
– – S E T U P ME N U – –
V I D E O A D J U S T .
MOD E S E L E C T .
COMMU N I C A T I O N .
E N D MEMO R Y
.
.
.
To save the setting contents, be sure
to select “MEMORY”.
Finally, press the SET button.
* “DATA SAVED” is displayed in the
lower part of the screen, and then the
normal screen returns.
SETUP MENU screen
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Settings Using the RM-P2580
MENU
button
S E T U P
SET button
Select the
P O S I T I O N S E T U P
.
.
REMOTE CONTROL UNIT RM-P2580
C AME R A .
CON T RO L U N I T .
.
CAMERA
item.
CAMERA
POSITION
SETUP
POWER
ALARM
.
MENU
SET
AUTO
F-1
F-2
F-3
KEY LOCK
LENS
SPEED
CAMERA/PPOSITION
PAN/TILT
CAMERA
POSI-
TION
1
4
2
5
8
3
6
OPTION
1
OPTION
2
CLOSE
NEAR
IRIS
OPEN
FAR
PAN/TILT
control lever
FOCUS
AF
AUTO
PAN
AUTO
PATROL
7
9
0
WIDE
TELE
CLEAR
ENTER
ZOOM
/HOME
SETUP screen from remote control
SET button
RM-P2580
When using the RM-P2580.
FUNCTION
1. Press the MENU button for about 3 seconds to display the remote control’s SETUP
screen on the monitor. (Above figure)
2. Press the PAN/TILT control lever up (6) or down (7) to align the cursor (>) with the
CAMERA item. Then press the SET button.
• The SETUP screen appears. (See figures on the left.)
3. Press the PAN/TILT control lever up (6) or down (7) to align the cursor (>) with the item
to be set. Then press the SET button.
• The selected itemís submenu appears.
MEMO
Items followed by “..” are items that have a submenu.
4. Press the PAN/TILT control lever up (6) or down (7) to align the cursor (>) with the item
to be set.
5. Press the PAN/TILT control lever to the left (8) or to the right (t) to change the set value.
When the set value of an item is changed, the change mark (9) appears after the cursor
(>).
Ⅲ When items followed by the “..” indication are selected, press the SET button.
* The selected item’s setting screen appears.
6. To exit the submenu, press the PAN/TILT control lever down (7) to align the cursor (>)
with END. Then press the SET button.
• The SETUP MENU screen returns.
Ⅲ To set other submenus, repeat steps 3. to 6.
7. There are two methods to complete the menu settings.
• Align the cursor (>) with the END item on the SETUP MENU and press the PAN/TILT
control lever to the left (8) or to the right (t) to select the way to end. Finally, press
the SET button.
• Press the MENU button while the SETUP MENU screen is displayed. In this case, the
menu setting is completed in accordance with the setting displayed for the END item.
● To save the setting contents, be sure to select “MEMORY”.
• “DATA SAVED” is displayed in the lower part of the screen and then the normal screen
returns.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
SETUP MENU Screen
Variable
range
Factory
setting
Item
Function
VIDEO
ADJUST
Displays the VIDEO ADJUST. For adjust-
ing functions related to the video image of
each camera.
MODE
SELECT
Displays the MODE SELECT. For setting
the operation mode, etc. of each camera.
COMMUNICA-
TION
Only valid when settings are made using
the operation buttons on the camera body.
Displays the COMMUNICATION. For set-
ting the form of connection to the control
signal connection terminals on the cam-
era body and setting the communication
mode, etc.
FUNCTION
END
Only valid when settings are made by
transmitting commands. Displays the
FUNCTION menu. For settings related to
POSITION TEXT, AUTO PATROL, AUTO
PAN, etc.
MEMORY
MEMORY
CLEAR
FACTORY
Closes the SETUP MENU screen so that
the normal screen returns. After selecting
this item, select the way to end the menu
setting.
MEMORY: Set contents are retained in
memory.
CLEAR:
Settings of the following items
return to the contents valid be-
fore the setting, and other set-
tings return to the factory set-
tings.
• MANUAL WHITE BALANCE
• AWC
• CAMERA TEXT
• COMMUNICATION menu
FACTORY: Set contents return to the fac-
tory settings.
However, when making set-
tings by means of transmitted
commands, the contents of the
COMMUNICATION menu do
not return to the factory set-
tings.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO ADJUST Screen
Variable
range
Factory
setting
Item
Function
IRIS LEVEL
Adjusts the brightness level of the video signal.
• To lower the brightness level …Decrease the
value
• To raise the brightness level … Increase the
value
–5 to
NORMAL
to 5
NORMAL
COLOUR
LEVEL
–5 to
To adjust the color level of the video signal.
NORMAL
NORMAL
• To make colors lighter … Decrease the value NORMAL
to 5
• To make colors darker … Increase the value
ENHANCE
LEVEL
To adjust the contour enhancing level of the
video signal.
• To make the picture quality softer …
–5 to
NORMAL
to 5
Decrease the value
• To make the picture quality harder …
Increase the value
AGC MODE Sets the maximum gain of the AGC (Automatic
OFF
10 dB
20 dB
20 dB
OFF
Gain Control).
• Set to OFF when the AGC function is not
used.
• Set to 20 dB when illumination is particularly
dim.
SUPER
AGC
Used when the brightness is still insufficient
even if the AGC MODE is set at 20 dB.
ON: Gain level is increased.
ON
OFF
OFF: Gain level is not increased.
* When SUPER AGC is ON;
• Dark areas of the screen may appear grainy.
• Gain will be set according to the setting of
the SUPER AGC with no relation to the AGC
MODE setting.
BLC
Sets the backlight compensation function. Set
when a bright light source, etc. is placed in the
same direction as the subject.
• OFF: The backlight compensation function
does not work.
• AREA 1 to AREA 4: When the SET button is
pressed, the fixed light metering areas are
displayed. Select one of the four types.
• EDIT 1 to EDIT 2: When the SET button is
pressed, the user light metering areas are
displayed. Select one of the two types.
੬ See “BLC Adjustment” on page 32.
OFF
OFF
AREA 1
AREA 2
AREA 3
AREA 4
EDIT 1
EDIT 2
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
VIDEO ADJUST Screen (Continued)
Variable
range
Factory
setting
Item
Function
AVERAGE:
PEAK
Sets the exposure detection as a ratio of the
average value and the peak value.
• AVERAGE value large: Increase the AVER-
AGE value when portions other than the high-
lighted areas of the screen are dark and look
corrupted. (Ex. 10:0)
10:0
9:1
8:2
7:3
6:4
5:5
8:2
• PEAK value large: Increase the PEAK value
when halation occurs in the highlighted ar-
eas of the screen. (Ex. 5:5)
WHITE
BALANCE
Selects the white balance adjustment function.
The white balance can be adjusted manually
or automatically for light within the color tem-
perature range of 2500K to 8000K.
ATW
MANUAL
AWC
ATW
• ATW:
Automatic color temperature ad-
justment mode.
• MANUAL:Manual adjustment mode. When
the SET button is pressed, the
adjustment screen appears.
੬ See page 35.
• AWC:
One-push auto white balance
mode. When the SET button is
pressed, the AWC operation
screen appears. ੬ See page 35.
END
When the SET button is pressed, the SETUP
MENU screen returns.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MODE SELECT Screen
Variable
range
Factory
setting
Item
Function
OFF
ON
EDIT
CAMERA
TEXT
To select whether or not camera text is dis-
played and to display the CAMERA TEXT set-
ting screen.
OFF
OFF: Camera text is not displayed.
ON: Camera text is displayed in the lower part
of the screen.
EDIT: When the SET button is pressed, the
CAMERA TEXT setting screen is dis-
played.
੬ See page 36.
* When EDIT is selected and the SET button
is not pressed, and the cursor is moved or
you switch to another menu, this function is
automatically set to ON.
V PHASE
To adjust and align the vertical phase of the
camera body with other cameras operating in
the Line Lock (L/L) mode.
0 to 255
128
Adjust while viewing the monitor screen.
* Adjustment is made with the LEFT button and
RIGHT button or by pressing the PAN/TILT
control lever to the left or right.
OFF
PAN
TILT
SCROLL
PATROL
AUTO
START
To select the digital zoom operation mode for
when the power is turned on.
OFF
OFF: The digital zoom does not operate.
PAN/TILT/SCROLL/PATROL: When the SET
button is pressed, zoom operation takes place
in accordance with the set contents.
੬ See page 38.
MEMO
This item does not function when operating
with the RM-P2580.
END
When the SET button is pressed, the SETUP
MENU screen returns.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
COMMUNICATION Screen
Only displayed when settings are made using the operation buttons on the camera body.
Variable
range
Factory
setting
Item
MODE
Function
SYMPLEX
DUPLEX
Sets the communication form used for com-
munication with the external control device,
such as the remote control unit.
DUPLEX
SIMPLEX: Only reception of signals from the
external control device takes place.
DUPLEX: Signals are both sent to and received
from the external control device.
STYLE
Set in accordance with the way the connec- POINT TO
POINT TO
POINT
POINT
tion to the external control device, such as the
remote control unit, is made.
MULTI-
DROP
• POINT TO POINT: Select this setting when
the external control device is used to control
one single camera.
• MULTIDROP: Select this setting when the
external control device is used to control mul-
tiple cameras.
ID
For setting the camera ID.
1 to 99
1
Be sure to set the camera ID when
MULTIDROP is selected for the STYLE item.
* Be careful not to duplicate the camera ID.
END
When the SET button is pressed, the SETUP
MENU screen returns.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION Screen
Only displayed when making settings by sending commands from an external controller,
such as the RM-P2580.
Variable
range
Factory
setting
Item
Function
POSITION
TEXT EDIT
When the SET button is pressed, the POSI-
TION TEXT setting screen is displayed. Up to
16 characters can be used as titles for set po-
sitions and home positions.
੬ See page 39.
POSI. TEXT Selects the position for displaying POSITION
UP-L
DOWN-L
UP-C
DOWN-C
UP-R
UP-L
LOC.
TEXT on the screen.
UP-L: Upper left side DOWN-L: Lower left side
UP-C: Upper center DOWN -C: Lower center
UP-R: Upper right side DOWN-R: Lower right side
DOWN-R
AUTO
PATROL
Used to set the position order and the surveil-
lance time for Auto Patrol operation.
When the SET button is pressed, the AUTO PA-
TROL setting screen appears.
੬
See page 41.
AUTO PAN
MODE
Selects the operation mode when the AUTO
PAN command is received. (In the case of RM-
P2580, this selects the operation mode when
the AUTO PAN button is pressed.)
PAN
TILT
SCROLL
PAN
ALM. TEXT
SIZE
Set the size of the characters displayed in the NORMAL
case of alarms.
DOUBLE
DOUBLE
A L A R M
AL ARM
NORMAL
DOUBLE
END
When the SET button is pressed, the SETUP
MENU screen returns.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
BLC (Back Light Compensation) Adjustment
MENU
button
SET button
REMOTE CONTROL UNIT RM-P2580
MONITOR
CAMERA
POSITION
SETUP
POWER
ALARM
MENU
SET
AUT
R
O
EMOT
F
E
-1CONTRF-
O
2
L
UNITF-3RM-P2580
LEFT button
UP button
KEY LOCK
CAMERA
POSITION
PO
MENU
F-1
F-3
LENS
CAMERA/POSITION
PAN/TILT
SET button
NOT USED
NOT USED
L/L
CAMERA
POSI-
TION
SPEED
1
4
2
5
8
3
INT
OFF
ON
CAMERA/POSITION
TERMINATION
OPTION
1
OPTION
CAMERA
2
CLOSE
NEAR
IRIS
OPEN
FAR
6
LOCK
SET
PAN/TILT
control lever
AWC
UP
RIGHT
LEFT
FOCUS
AF
AUTO
PAN
AUTO
PATROL
7
9
CLOSE
DOWN
RIGHT button
0
WIDE
TELE
CLEAR
ENTER
ZOOM
AUTO
PAN
AUTO
PATROL
/HOME
DOWN button
WIDE
/HOME
LOCK screw
RM-P2580
Set when a bright light source is placed behind or in the direction of the subject making the
point difficult to view on the screen.
Make the setting after selecting the BLC item on the VIDEO ADJUST screen.
MEMO
BLC does not function while the digital zoom is in used.
Fixed Light Metering Areas
Ⅲ Set the BLC item to any ofAREA1 toAREA
4. When the SET button is pressed, the
fixed light metering area is displayed on the
monitor.
Light
Light
Light
Light
Light
metering metering metering metering metering
area
area
area
area
area
Adjust so that the unwanted light source is
outside the light metering area.
Ⅲ To stop display of the light metering area:
• Press the SET button when operating on
the camera body.
OFF
AREA 1
AREA 2
AREA 3
AREA 4
• Press the MENU button when using RM-
P2580.
The VIDEO ADJUST screen returns.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
User Settable Light Metering Areas
Ⅲ Select EDIT 1 or EDIT 2 for the BLC item.
When the SET button is pressed, the user
settable light metering area is displayed on
the monitor.
3. Use the LEFT or RIGHT button to shift
the position of the right side of the light
metering area, and use the UP or
DOWN button to shift the down side.
EDIT 1
EDIT 2
4. When the SET button is pressed, the
VIDEO ADJUST screen returns.
Light
meter-
ing
Light
meter-
ing
When operating using the RM-P2580
area
area
1. Press the SET button to select the light
metering area position to be set. (Left/
up ➝ right/down ➝ left/up ...)
2. Press the PAN/TILT control lever to the
left (8) or to the right (t) to shift the
position of the left or right side,
respectively.
When operating using the camera body
Press the PAN/TILT control lever upward
(6) or downward (7) to shift the up or
down side position.
1. Use the LEFT or RIGHT button to shift
the position of the left side of the light
metering area, and use the UP or
DOWN button to shift the upper side.
3. When the MENU button is pressed, the
VIDEO ADJUST screen returns.
2. Press the SET button to change the
position to be set from the left/up side
to the right/down side.
Manual Adjustment of White Balance
MENU
button
SET button
REMOTE CONTROL UNIT RM-P2580
CAMERA
POSITION
MONITOR
SETUP
POWER
ALARM
MENU
SET
AUTO
F-1
F-2
F-3
KEY LOCK
LEFT button
UP button
LENS
SPEED
CAMERA/PPOSITION
PAN/TILT
SET button
NOT USED
NOT USED
L/L
CAMERA
POSI-
TION
1
4
2
5
8
3
6
INT
OFF
TERMINATION
ON
OPTION
1
OPTION
2
CLOSE
NEAR
IRIS
OPEN
FAR
LOCK
PAN/TILT
control lever
SET
AWC
UP
RIGHT
LEFT
FOCUS
AF
AUTO
PAN
AUTO
PATROL
7
9
DOWN
RIGHT button
0
WIDE
TELE
CLEAR
ENTER
ZOOM
/HOME
DOWN button
RM-P2580
When automatic adjustment of the white bal-
ance results in a “reddish screen”, etc., ad-
just the white balance manually.
– – V I D E O A D J U S T – –
I R I S L E V E L
CO L OU R L E V E L
E N H A N C E L E V E L
A GC MOD E
NORM A L
NORM A L
NORM A L
2 0 d B
1. Adjust the white balance manually.
Set the WHITE BALANCE item on the
VIDEO ADJUST screen to MANUAL
and press the SET button.
S U P E R A GC
O F F
O F F
8 : 2
B L C .
.
A V E R A G E : P E A K
WH I T E B A L A NC E
E N D
M A N U A L
• The MANUAL WHITE BALANCE
adjustment screen appears on the
monitor.
VIDEO ADJUST screen
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
Manual Adjustment of White Balance (Continued)
2. Select the hue to be adjusted. (R/B or
Mg/G)
– – MA NU A L WH I T E B A L A N C E – –
Ⅲ When operating using the camera
body, press the UP or DOWN button.
Ⅲ When using the RM-P2580, press the
PAN/TILT control lever upward (6) or
downward (7).
R
M
E N D
:
- - - - - - - - - - - - - - - - - : B
+
g : - - - - - - - - - - - - - - - - - : G
+
3. Adjust the hue.
Ⅲ When operating using the camera
body, press the LEFT or RIGHT
button.
Ⅲ When using the RM-P2580, press the
PAN/TILT control lever to the left (8)
or to the right (t).
WHITE BALANCE
adjustment screen
• The “+” indicator moves in accordance
with the setting. When a setting is
changed, the “9” mark appears at the
original position.
– – MA NU A L WH I T E B A L A N C E – –
R
:
- - - - - - - - - - - - - - - - : B
+
- - - - - - - - - - - - - - - - - : G
M g :
E N D
+
4. Concluding manual white balance
adjustment.
Ⅲ When operating using the camera
body, press the UP or DOWN button
to align the cursor (>) with the END
item. Then press the SET button.
Ⅲ When using the RM-P2580, press the
MENU button or use the PAN/TILT
control lever to align the cursor (>) with
the END item and then press the SET
button.
Setting indicating mark
Original position
• The VIDEO ADJUST screen returns.
CAUTION:
The color temperature will be slightly af-
fected when the dome cover is attached.
Pay attention to this when adjusting the
white balance manually.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
AWC (One-push Auto White Balance) Adjustment
Using a simple operation, the AWC function
allows the white balance to be fixed as the
one valid at a given point. Used for observa-
tion when the color temperature changes fre-
quently.
MONITOR
LEFT button
UP(AWC) button
AWC
NOT USED
NOT USED
L/L
INT
OFF
ON
TERMINATION
1. The following two methods are available
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
for activating the AWS function.
RIGHT
1
DOWN
Press the UP (AWC) button on the
camera body for about 1 second
while the normal screen (no setup
menu shown) is displayed.
or
Set the WHITE BALANCE item on
the VIDEO ADJUST screen to AWC
and press the SET button. (Possible
both on the camera body and the
RM-P2580).
– – V I D E O A D J U S T – –
I R I S L E V E L
CO L OU R L E V E L
E N H A N C E L E V E L
A GC MOD E
NORM A L
NORM A L
NORM A L
2 0 d B
2
S U P E R A GC
O F F
O F F
8
B L C .
.
A V E R A G E : P E A K
WH I T E B A L A NC E
E N D
:
2
AWC
VIDEO ADJUST screen
2. When the AWC function is activated,
“AWC OPERATION” is displayed at the
bottom of the monitor screen.
3. The result of the AWC operation is
displayed on the monitor screen for
approximately 5 seconds. Then the
screen displayed before the AWC
function was activated returns. (Normal
screen or VIDEO ADJUST screen)
AWC
O P E R A T I O N
During AWC operation
Operation result indication
AWC
OK
: Completed
normally
AWC NG : OBJECT
: The color
temperature is
outside the
tracking range
AWC ERROR : HIGH LIGHT : Excessive
brightness
AWC
O K
AWC ERROR: LOW LIGHT : Insufficient
brightness
Indication when operation is completed normally.
Blinks
MEMO:
The AWC function invoked by the UP
(AWC) button on the camera body starts
up regardless of the setting of the WHITE
BALANCE item on the VIDEO ADJUST
screen.
AWC
NG : O B J E C T
Indication in case of abnormality
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
CAMERA TEXT Setting
MENU
button
(RM-P2580)
SET button
REMOTE CONTROL UNIT RM-P2580
CAMERA
POSITION
SETUP
POWER
ALARM
MONITOR
MENU
SET
AUTO
F-1
F-2
F-3
KEY LOCK
LEFT button
LENS
SPEED
CAMERA/POSITION
PAN/TILT
UP button
CAMERA
POSI-
TION
1
4
2
5
8
3
6
SET button
NOT USED
NOT USED
L/L
OPTION
1
OPTION
2
INT
OFF
CLOSE
NEAR
IRIS
OPEN
FAR
ON
PAN/TILT
control lever
TERMINATION
FOCUS
AF
AUTO
PAN
AUTO
PATROL
LOCK
SET
AWC
UP
7
9
LEFT
RIGHT
0
WIDE
TELE
CLEAR
ENTER
ZOOM
DOWN
/HOME
RIGHT button
DOWN button
ZOOM(TELE) button
ZOOM(WIDE)
button
– – MOD E S E L E C T – –
Up to 24 characters can be selected as cam-
era text for each camera. The set characters
are displayed at the bottom of the screen.
C AME R A T E X T
V . P H A S E
E D I T
1 2 8
O F F
A U T O S T A R T .
E N D
.
1. Set the CAMERA TEXT item on the
MODE SELECT screen to EDIT. Then
press the SET button.
• The CAMERA TEXT screen appears
on the monitor screen.
MODE SELECT SCREEN
• Characters selected from the
character area are displayed in the text
input area.
Space
Character area
– – C AM E R A T E X T – –
0 1 2 3 4 5 6 7 8 9 – :
Setting using the camera body
/
.
,
A B C D E F GH I J K L NMO P
QR S T U VWX Y Z
a b c d e f g h i j k l m n o p
q r s t u v w x y z ’
ÄÖÜ Â Ê Î ÔÛÇÑ
ä ë ï ö ü â ê î ô û á é í ó ú
à è ì ò ù ç ñ ß ¡ ¿
2. Use the UP or DOWN button to select
the position in the character input area.
The position moves to the right when the
UP button is pressed, and it moves to
the left when the DOWN button is
pressed.
>
S E L E C T T E X T Z OOM
3. Use the LEFT or RIGHT button to select
the character to be input from the
character area.
CAMERA TEXT screen
(Displayed only
for E-version)
Text input area
4. When the first character for the text has
been selected, press the UP button.
• The first character of the text is
confirmed, and the second character
can now be input.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When the whole text has been input,
press the SET button.
– – C AM E R A T E X T – –
0 1 2 3 4 5 6 7 8 9 – :
A B C D E F GH I J K L NMO P
QR S T U VWX Y Z
/
.
,
• The MODE SELECT screen returns.
a b c d e f g h i
q r s t u v w x y z ’
j
k
l m n o p
Setting using the RM-P2580
ÄÖÜ Â Ê Î ÔÛÇÑ
ä ë ï ö ü â ê î ô û á é í ó ú
à è ì ò ù ç ñ ß ¡ ¿
2. Use the ZOOM (TELE) or ZOOM
(WIDE) button to select the position in
the character input area. The position
moves to the right when the ZOOM
(TELE) button is pressed, and it moves
to the left when the ZOOM (WIDE)
button is pressed.
>
S E L E C T T E X T Z OOM
C A ME R
(Displayed only
for E-version)
3. Use the PAN/TILT control lever to select
the character to be input from the
character area.
4. When the first character for the text has
been selected, press the ZOOM (TELE)
button.
• The first character of the text is
confirmed, and the second character
can now be input.
5. When the whole text has been input,
press the MENU button.
• The MODE SELECT screen returns.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
AUTO START DEMO
– – MOD E S E L E C T – –
MONITOR
C AME R A T E X T
V . P H A S E
ED I T
1 2 8
A U T O S T A R T .
E N D
.
P A T R O L
SET buttom
NOT USED
NOT USED
L/L
INT
OFF
ON
TERMINATION
LOCK
SET
AWC
UP
RIGHT
LEFT
DOWN
MODE SELECT screen
When the power is turned on, a demonstra-
tion of the zoom operation selected for the
AUTO START item on the MODE SELECT
screen takes place.
A U T O S T A R T D EMO N S T R A T I O N
1. Select the AUTO START item on the
MODE SELECT screen, and then press
the SET button.
• A zoom operation takes place in
accordance with the set contents
(PAN, TILT, SCROLL, PATROL).
At this point, “AUTO START
DEMONSTATION” is shown on the
monitor screen.
HOME
• In the case of PATROL, the position
change interval will be 10 seconds
regardless of the setting.
2. Stopping the DEMONSTRATION
POSITION 1
POSITION 2
operation
Ⅲ When using the camera body, press
the SET button.
POSITION 5
Ⅲ When using the RM-P2580, press the
MENU button.
POSITION 3
POSITION 4
• The MODE SELECT screen returns.
AUTO PATROL (Factory setting)
(੬ See page 41.)
AUTO SCROLE
AUTO TILT
AUTO PAN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
POSITION TEXT Setting
MENU
button
SET button
(RM-P2580)
Numeric key buttons
REMOTE CONTROL UNIT RM-P2580
CAMERA
POSITION
SETUP
POWER
ALARM
MENU
SET
AUTO
F-1
F-2
F-3
KEY LOCK
CAMERA button
POSITION button
LENS
SPEED
CAMERA/POSITION
PAN/TILT
CAMERA
POSI-
TION
1
4
2
5
8
3
6
OPTION
1
OPTION
2
ZOOM (TELE) button
ZOOM (WIDE) button
CLOSE
NEAR
IRIS
OPEN
FAR
PAN/TILT control lever
FOCUS
AF
AUTO
PAN
AUTO
PATROL
7
9
0
WIDE
TELE
CLEAR
ENTER
ZOOM
/HOME
ENTER button
A title can be set for the registered positions
for each camera. The position title can only
be set by transmitting commands from the
RM-P2580, etc. The position title can consist
of up to 16 characters. The set characters are
displayed at the bottom of the screen.
Ⅲ Select the camera for which position
title text should be set and select the
position.
– – F U N C T I O N – –
P O S I T I O N T E X T E D I T .
.
P O S . T E X T L OC .
A U T O P A T RO L .
U P – L
.
A U T O P A N MOD E
A L M . T E X T S I Z E
E N D
P A N
DOU B L E
• Use the CAMERA button ➝ Numeric
key ➝ ENTER button to select the
camera.
FUNCTION screen
• Use the POSITION button ➝ Numeric
key ➝ ENTER button to select the
position.
Character area
Space
For details, see the instruction manual
for the RM-P2580.
– – P O S I T I ON T E X T – –
0 1 2 3 4 5 6 7 8 9 – :
/
.
,
A B C D E F GH I J K L NMO P
QR S T U VWX Y Z
a b c d e f g h i j k l m n o p
q r s t u v w x y z ’
ÄÖÜ Â Ê Î ÔÛÇÑ
ä ë ï ö ü â ê î ô û á é í ó ú
à è ì ò ù ç ñ ß ¡ ¿
1. Align the cursor (>) with the POSITION
TEXT EDIT item on the FUNCTION
screen, and then press the SET button.
• The POSITION TEXT screen is
displayed on the monitor.
2. Use the ZOOM (TELE) or ZOOM
(WIDE) button to select the position in
the character input area.
>
S E L E C T T E X T Z OOM
The position moves to the right when the
ZOOM (TELE) button is pressed, and it
moves to the left when the ZOOM
(WIDE) button is pressed.
POSITION TEXT screen
Text input area
(Displayed only
for E-version)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
POSITION TEXT Setting (Continued)
3. Use the PAN/TILT control lever to select
– – P O S I T I ON T E X T – –
0 1 2 3 4 5 6 7 8 9 – :
A B C D E F GH I J K L NMO P
QR S T U VWX Y Z
the character to be input from the
character area.
/
.
,
4. When the first character for the text has
been selected, press the ZOOM (TELE)
button.
a b c d e f g h i j k l m n o p
q r s t u v w x y z ’
ÄÖÜ Â Ê Î ÔÛÇÑ
ä ë ï ö ü â ê î ô û á é í ó ú
à è ì ò ù ç ñ ß ¡ ¿
• The first character of the text is
confirmed, and the second character
can now be input.
>
S E L E C T T E X T Z OOM
P O S I
5. To set other position text titles, use the
POSITION button ➝ Numeric key ➝
ENTER button to change the position
number. The repeat steps 2. to 4. to set
the text.
6. When setting of all titles is completed,
press the MENU button.
• The FUNCTION screen returns on the
monitor.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO PATROL Setting
HOME
MENU
button
(RM-P2580)
SET button
REMOTE CONTROL UNIT RM-P2580
CAMERA
POSITION
SETUP
POWER
ALARM
MENU
SET
AUTO
F-1
F-2
F-3
KEY LOCK
POSITION
button
LENS
SPEED
CAMERA/PPOSITION
PAN/TILT
POSITION 1
POSITION 2
CAMERA
POSI-
TION
1
4
2
5
8
3
6
OPTION
1
OPTION
2
CLOSE
NEAR
IRIS
OPEN
FAR
PAN/TILT
control lever
FOCUS
AF
AUTO
PAN
AUTO
PATROL
7
9
POSITION 5
0
WIDE
TELE
CLEAR
ENTER
ZOOM
/HOME
POSITION 3
POSITION 4
AUTO PATROL
button
AUTO PATROL (Factory setting)
The AUTO PATROL function allows you to
specify multiple positions (up to 6 positions)
that the camera will move to in the specified
order and observe for the specified interval.
The order of movement and observation in-
terval for the AUTO PATROL operation can
only be set by transmitting commands from
the RM-P2580, etc.
– – F U N C T I O N – –
P O S I T I O N T E X T E D I T .
P O S . T E X T L OC .
.
U P – L
.
.
A U T O P A T RO L
A U T O P A N MOD E
A L M . T E X T S I Z E
E N D
P A N
DOU B L E
1. Align the cursor (>) with the AUTO
PATROL item on the FUNCTION
screen. Then press the SET button.
• The AUTO PATROL setting screen
appears on the monitor.
FUNCTION screen
The PATROL1 to 6 items indicate the
AUTO PATROL operation order.
PATROL1: Specifies the first position
number and the observation
interval for AUTO PATROL.
PATROL6: Specifies the last position
number and the observation
interval for AUTO PATROL.
2. Press the PAN/TILT control lever up (6)
or down (7) to align the cursor (>) with
the PATROL No. item to be set.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
AUTO PATROL Setting (Continued)
3. Press the POSITION button to set the
position number of the selected PATROL
No. item.
4. Press the PAN/TILT control lever to the
left (8) or to the right (t) to set the
observation interval for the selected
PATROL No.
• If set to SKIP, observation will not take
place at this position.
5. Repeat steps 2. to 4. to set the position
number and observation interval for all
the PATROL No. items.
6. When the AUTO PATROL setting is
completed, press the MENU button or
use the PAN/TILT control lever to align
the cursor (>) with the END item and
then press the SET button.
POSITION number
setting
HOME
POS1
to
Observation
time
POS5
10s
20s
30s
• The FUNCTION screen returns on the
monitor.
45s
Ⅲ To start theAUTO PATROL operation, press
the AUTO PATROL button on the RM-
P2580.
1min
2min
SKIP
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Ⅲ GENERAL
Ⅲ CAMERA
Remote control input:
Signal system: U type based on NTSC
standard
RS-422A or RS-485
(non-isolated) connector
9600 bit/s
E type based on PAL stan-
dard
Baud rate:
Power requirement:
AC 24 V ` 50/60 Hz or
DC 12 V
Power consumption:
Image device: 1/4” IT CCD
Effective picture elements:
U type 380,000 pixels,
768 (H) × 494 (V)
U type Approx. 3.6 W
E type Approx. 300 mA
570 ˝ (including ceiling
mount)
E type 440,000 pixels,
752 (H) × 582 (V)
Mass:
Sync system: Line lock/Internal
Video S/N:
Horizontal resolution:
470 TV lines (Typ.)
Minimum illumination:
4 l× (Full wide angle, AGC
50 dB (AGC OFF)
Operating temperature:
–10°C to 50°C (recom-
mended: 0°C to 40°C)
Approx. 112 mm diam-
eter × 113 mm
Dimensions:
20 dB, Y: 25%)
1.5 l× (Full wide angle,
AGC 20 dB, Y: 25%, no
cover)
Accessories:
U type
E type
• Instructions × 1
• Instructions × 2
• Ceiling mount × 1 • Ceiling mount × 1
• Terminal board × 1 • Terminal board × 1
• Warranty card × 1
Camera ID:
White balance:ATW/Manual/AWC
(one-push white balance)
24 letters
• Service information
Color temperature range
2500K to 8000K.
card × 1
Backlight compensation:
Ⅲ External dimensions [Unit: mm]
Available by adjustment of
light metering area posi-
tion.
φ112
φ110
Ⅲ LENS
Focal length: 2.6 mm to 6 mm (variable)
Max. aperture ratio:
F1.2 to F1.8
SR52
Angle of vision:
f = 2.6 mm
82° (H) × 59° (V)
f = 6 mm
35° (H) × 26° (V)
φ106
• Design and specifications are subject to
change without notice.
Angle adjustment range:
Horizontal: 90°
Vertical: 130°
Tilt: 30°
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
®is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.
®is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
Printed in Thailand
SC96896H-001
© 2000 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|