JVC Projection Television HD 58S998 User Manual

Projection Television Users Guide  
For Model:  
HD-58S998  
Illustration of HD-58S998 and RM-C1400  
Important Note:  
In the spaces below, enter the model and serial number of your television (located  
at the rear of the television cabinet). Staple your sales receipt or invoice to the  
inside cover of this guide. Keep this user’s guide in a convenient place for future  
reference. Keep the carton and original packaging for future use.  
Model Number:  
LCT2172-001B-A  
1106TNH-II-IM  
Serial Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
• As an “ENERGY STAR ” partner,  
JVC has determined that this  
product or product model meets the  
®
“ENERGY STAR ” guidelines for energy  
efficiency.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to  
avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as  
vases, shall be placed on the apparatus.  
16) Avoid improper installation and never position the unit where good ventilation is impossible. When  
installing this TV, distance recommendations must be maintained between the set and the wall,  
as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance  
guidelines shown for safe operation.  
200 mm  
200 mm  
150 mm  
150 mm  
17) Cautions for installation  
— Do not tilt the TV towards the left or right, or towards the back.  
— Install the TV in a corner on the floor so as to keep cords out of the way.  
— The TV will generate a slight amount of heat during operation. Ensure that sufficient space is  
available around the TV to allow satisfactory cooling.  
18) Make enough room for inserting and removing the power plug. Place the TV as close to the  
outlet as possible. The main power supply for this TV is controlled by inserting or removing the  
power plug.  
FCC Notice:  
Note: This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
Caution – This television model HD-58S998 is for use only with JVC Model RK-CSLM8 stand  
and JVC Model TS-CP01WG wall mounting bracket. Use with other stands or wall mounting  
brackets are capable of resulting in instability causing possible injury.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
We have an important note for customers who subscribe to basic cable services (do not have  
a separate cable box) and plan to use their JVC TV remote control to select channels.  
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is  
receiving through the RF input), every channel number available from your cable company  
will appear in your television’s Channel Summary and they will all be marked as available for  
scanning. Even though every channel is detected and appears as available, you will only be  
able to view those that you specically subscribe to from your cable company. This will likely  
mean there are blank channels between those channels you wish to scan or “surf”.  
We apologize for any inconvenience this may cause but it is important to note that this is  
not a malfunction of your television. If you want to sequentially scan those channels you  
subscribe to without blank ones in between, you can contact your cable company for their  
cable box and remote.  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly  
moistened with water. You can add a few drops of mild liquid detergent to the water to help  
remove spots of oily dirt.  
• DO NOT allow liquid to enter the TV through the ventilation slots.  
• DO NOT use strong or abrasive cleaners on the TV.  
• DO NOT spray liquids or cleaners directly on the TV’s surface.  
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a  
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner  
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
Do not push or hit the screen. This could cause scratches on the screen surface and image  
distortions.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Thank you for purchasing a JVC HDTV-ready projection television which uses the high-quality  
HD-ILA projection system. This is one of the highest quality and most technologically advanced  
televisions available today. It is recommended that you read this instruction manual before using  
your television in order to learn about it’s many features. Cautions related to the safe use of the  
device and important information which will help you to be able to use this device for a long time  
is in the Appendix. Once again, thank you for purchasing this television and please enjoy using  
it.  
In order to use the television for a long time  
This television uses a lamp to project the picture onto the screen. Before using this television,  
please read the safety cautions and information about this television which are summarized  
below.  
1. When the power is turned on, the warming up commences  
This television uses a lamp to project the picture onto the screen. Once the lamp has warmed  
up, you can enjoy the pictures at their full brightness. What happens when the power is turned  
on is explained below. Immediately after the power is turned on, since the lamp has not had  
time to warm up, the picture is displayed only dimly on the screen. As the lamp warms up, the  
picture becomes brighter. It takes approximately one minute for the lamp to warm up to it’s  
normal operating temperature. There are 2 LED indicators on the front panel of the television  
that can be used as a guide. When the POWER button is pressed, the LAMP LED indicator  
blinks in orange for approximately 1 minute at approximately every 2 seconds, and then goes  
out.  
Note: It is impossible to turn the power off during this period. After 1 or more minutes have  
passed, you can turn off the power.  
2. Cooling the inside of the television and the lamp  
Cooling is also performed while the television is being shut down.  
When the POWER button is pressed to turn off the power, the following operations are  
performed. When the television is turned off, the screen transitions to dark like a curtain from  
top to bottom. Then, cooling is performed for approximately 40 seconds. When the cooling is  
being performed, the LAMP LED indicator on the front panel blinks in orange at approximately  
every 3 seconds. The television can not be operated while the cooling is being performed.  
After the cooling has been performed for 40 seconds, the power is turned off. Do not remove  
the electrical plug until after the cooling process has completed. If the electrical plug is  
removed before the cooling process has completed, the internal circuits and lamp may overheat  
leading to the life of the lamp being shortened and the possibility of malfunctions.  
Do not block the ventilation holes.  
Do not block the ventilation holes while the power is turned on. Do not block the air intake holes  
behind the speaker grills.  
3. The lamp is a consumable item  
Replace the lamp when it has blown or when the picture becomes dark. The lamp is a user  
replaceable item. The lamp must be recycled. For a detailed explanation on how to recycle the  
lamp, refer to the Appendix and the instructions that are included with the replacement lamp kit.  
The life of the lamp changes depending on the atmospheric temperature and altitude in which  
the TV is being used.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
4. The television requires a lot of electrical power  
It is recommended that the television is connected directly to the wall socket, and not to another  
device. When connecting the television to a wall socket that is being used by another device, or  
when using an extension cord, be careful not to exceed the electrical capacity of the socket.  
Do not turn the power on and off repeatedly in a short amount of time.  
It subjects the television and the lamp to stress and may lead to malfunctions and the life of the  
lamp being shortened.  
5. The screen is made of plastic  
Handle the screen very carefully as it can scratch easily. Do not rub, hit or press on it with any  
hard objects. When the screen is dirty, gently wipe it with a soft cloth. Refer to the Appendix for  
details on how to clean the screen.  
6. Caution! Warm air from the air ducts  
This unit has an air duct for cooling. The duct will blow warm air while the television is operating.  
When placing the television, make sure not to locate it too close to wallpaper. The warm air  
could cause the color of the wallpaper to change. Also, take care to keep children and pets  
away from the warm air ducts. Long exposure to the warm air from the ducts could cause a  
minor burn.  
7. Caution! Moving this television  
When lifting this television, Do not hold by the screen. Holding the screen could cause it to  
detach, causing the television to fall.  
8. Do not replace the lamp immediately after use  
The lamp becomes extremely hot during use. If the lamp is touched immediately after use  
before it has a chance to cool down, there is a danger of burns. Be careful when handling the  
lamp.  
9. Do not touch the lamp glass  
If the lamp is used when there is dirt from ngers on the lamp glass, there is a possibility of the  
lamp breaking. Be careful not to touch the lamp glass.  
10. ILA element characteristics  
Do not project still pictures or pictures that have still segments for a long period of time. The still  
parts of the picture may remain on the screen. This is a characteristic of ILA elements and not a  
malfunction. The picture will disappear over time.  
11. Condensation  
When a heater is turned on or the television is moved from a cold place to a hot place, droplets  
of water may form on the lamp and screen. This is called condensation. If the television is used  
while this condensation is still present, the picture may seem distorted, and the inside of the  
screen may become dirty. In this case, wait until the condensation has gone before using the  
television.  
12. Do not open the cabinet of this television  
This television has a HDMI terminal. Opening up the cabinet will violate the copyright of the  
program or software shown on the television. Please do not open the cabinet.  
13. Usable Time  
Do not keep the TV on for more than 24 hours consecutively. There is a possibility of the life of  
the lamp being shortened.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
The TV comes with front and rear pedestal (included). If you choose to mount the TV to a  
wall or utilize JVC optional (sold separately) TV stand model RK-CSLM8, or wall mounting kit  
TS-CP01WG, you will not need the pedestal but should keep it for possible future use.  
If you do not utilize TV stand model RK-CSLM8, the front and rear pedestal MUST be attached  
to prevent injury. If the TV sits ush against the wall, only the front pedestal MUST be attached.  
To attach the front and rear pedestal.  
1) Clear a at, soft area on which to lay the TV on it's back. Two  
people can gently lay back the TV. Please use extra care as  
any shock or impact may damage the TV. (Do not lay it on it's  
front to avoid damaging the screen.)  
2) Remove the front pedestal from its box and  
place it over the screw holes on the bottom  
of the TV. All the holes should match up  
perfectly. Tighten 8 Phillips type screws  
(included) into the holes marked.  
3) Gently return the TV to an upright position. Please attach the  
rear pedestal after you attach the front pedestal. If you attach  
the rear pedestal rst, you may break the pedestal when you  
attach the front pedestal.  
Note:  
• If the TV sits ush against the wall, you do not need to attach the rear pedestal.  
4) Remove rear pedestal from it's box and slide the rear pedestal  
as shown, under the TV and into the proper position.  
5) Remove the cover on the rear pedestal towards the upper part.  
6) Tighten 6 Phillips type screws (included) into the holes.  
7) Attach the cover again.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Button Functions . . . . . . . . . . 59  
Power . . . . . . . . . . . . . . . 59  
Number Buttons . . . . . . . . . . 59  
Tune . . . . . . . . . . . . . . . 59  
Channel +/- . . . . . . . . . . . . . 59  
Volume +/- . . . . . . . . . . . . . 59  
Muting . . . . . . . . . . . . . . 59  
D/A (Digital/Analog) . . . . . . . . 60  
Mode . . . . . . . . . . . . . . 60  
Input . . . . . . . . . . . . . . . 60  
Return+/TV . . . . . . . . . . . . 61  
Light . . . . . . . . . . . . . . . 61  
Menu . . . . . . . . . . . . . . . 61  
OK . . . . . . . . . . . . . . . . 61  
Back . . . . . . . . . . . . . . . 61  
Favorite . . . . . . . . . . . . . 62  
Aspect . . . . . . . . . . . . . 63  
Important Safety Precautions . . 2  
Warnings . . . . . . . . . . . . . . . 5  
Quick Setup . . . . . . . . . . . . . . 10  
Unpacking your TV . . . . . . . . . . . . 10  
TV Model . . . . . . . . . . . . . . . . 11  
TV Remote Control . . . . . . . . . . . 12  
Getting Started . . . . . . . . . . . . . 13  
The Remote Control . . . . . . . . . . 13  
Connecting Your Devices . . . . . . . 15  
Interactive Plug In Menu . . . . . . . . 24  
Onscreen Menus . . . . . . . . . 27  
Using the Guide . . . . . . . . . . . . . 27  
Onscreen Menu System . . . . . . . . . 28  
Auto Tuner Setup . . . . . . . . . . . . 30  
Channel Summary . . . . . . . . . . . . 31  
Channel Label . . . . . . . . . . . . . 32  
V-Chip . . . . . . . . . . . . . . . . . . 33  
Set Lock Code . . . . . . . . . . . . . 39  
Language . . . . . . . . . . . . . . . . 40  
Closed Caption . . . . . . . . . . . . . 40  
Auto Shut Off . . . . . . . . . . . . . . 43  
XDS ID . . . . . . . . . . . . . . . . . 43  
Noise Muting . . . . . . . . . . . . . . 43  
Front Panel Lock . . . . . . . . . . . . 44  
V3 Smart Input . . . . . . . . . . . . 44  
Video Input Label . . . . . . . . . . 45  
Position Adjustment . . . . . . . . . . . 46  
Power Indicator . . . . . . . . . . . . . 46  
HDMI Size . . . . . . . . . . . . . . . 47  
Video-1 Audio . . . . . . . . . . . 47  
Digital Setup . . . . . . . . . . . . . 48  
Antenna Level . . . . . . . . . . . . 48  
Digital Sound . . . . . . . . . . . . . . 49  
Software Version . . . . . . . . . . . . 49  
Software Update . . . . . . . . . . . . 50  
Picture Settings . . . . . . . . . . . . . 51  
Color Temperature . . . . . . . . . . . . 51  
Color Management . . . . . . . . . . . . 52  
Dynamic Gamma . . . . . . . . . . . . . 52  
Advanced Smart Picture . . . . . . . . 52  
Natural Cinema . . . . . . . . . . . . . 53  
Digital VNR . . . . . . . . . . . . . . . . 53  
MPEG NR . . . . . . . . . . . . . . . 54  
Reset . . . . . . . . . . . . . . . . . . 54  
Sound Settings . . . . . . . . . . . . . 55  
Turn On Volume . . . . . . . . . . . . . 55  
Volume Limit . . . . . . . . . . . . . . 55  
Reset . . . . . . . . . . . . . . . . . . 55  
Set Clock . . . . . . . . . . . . . . . . 56  
On/Off Timer . . . . . . . . . . . . . . . 57  
Lamp Timer Reset . . . . . . . . . . . . . 58  
Aspect Ratios  
.
.
.
.
.
.
.
.
.
.
63  
Guide . . . . . . . . . . . . . . . 64  
Sound . . . . . . . . . . . . . . . 65  
Sub Channel . . . . . . . . . . . . . 65  
Video Status . . . . . . . . . . . . 66  
C.C. . . . . . . . . . . . . . . . . 66  
Sleep Timer . . . . . . . . . . . . . 67  
ML/MTS . . . . . . . . . . . . . . . 67  
Twin . . . . . . . . . . . . . . . . . 68  
Swap . . . . . . . . . . . . . . . . 68  
Select . . . . . . . . . . . . . . . . 69  
Freeze . . . . . . . . . . . . . . . 69  
Display . . . . . . . . . . . . . . . 69  
External device control buttons . . . . 69  
Remote Programming . . . . . . . . 70  
Programming Codes . . . . . . . . 70  
OSD Information . . . . . . . . . . 76  
Lamp Replacement . . . . . . . 77  
Troubleshooting . . . . . . . . . . 81  
Specifications . . . . . . . . . . 83  
Warranty . . . . . . . . . . . . . 84  
Authorized Service Center . . . 85  
Notes . . . . . . . . . . . . . . 86  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new  
television, please check to make sure you have all of the following items. In addition to this  
guide, your television box should include:  
AA  
Batteries x 2  
Remote Control x 1  
Television x 1  
POWER  
D/A  
TV  
STB VCR DVD AUDIO  
INPUT  
MODE  
V1  
V2  
V3  
V4  
V5  
1
2
5
8
0
3
6
9
4
7
RETURN  
TV  
+
TUNE  
CH  
+
VOL  
+
LIGHT  
MUTING  
OK  
Note: Your television  
and/or remote  
DVR  
STATUS  
VIDEO  
SOUND  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
SUB T.  
DISPLAY  
control may differ  
from the examples  
illustrated here.  
TWIN  
SLEEP  
ML/MTS  
FREEZE  
SWAP  
SELECT  
RTM-CV1400  
Front Pedestal x 1  
Rear Pedestal x 1  
Philips type screws x 14  
Warning:  
• If you choose to mount the TV to a wall or utilize JVC optional (sold separately) TV stand  
model RK-CSLM8 or wall mounting kit TS-CP01WG, you will not need the pedestal, but  
should keep it for future use.  
• If you do not utilize TV stand model RK-CSLM8, the front and rear pedestal MUST be  
attached to prevent injury.  
• If the TV sits ush against the wall, only the front pedestal MUST be attached.  
We recommend that before you start using your new television, you read this entire User’s  
Guide so you can learn about your new television’s many great features. If you’re anxious to  
start using your television right away, a quick setup guide follows on the next few pages.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Model  
Before you connect your television to another device, please refer to the proper diagrams for  
your specific TV and remote. These will help assist you in understanding how to connect your  
television to another device, as well as use the remote to set up your television.  
Side Panel Diagram  
Facing the front of the TV, these connections are located behind the door on the right side.  
LICENSED UNDER THE  
SERVICE  
ONLY  
OPTICAL OUT  
Digital Audio  
FOLLOWING U.S. PATENTS  
6,183,091  
DIGITAL-IN  
6,419,362  
INPUT- 2  
INPUT-1  
75Ω  
(VHF/UHF)  
INPUT-3  
INPUT-4  
VIDEO  
S-VIDEO  
OVER  
AUDIO  
OUTPUT  
AUDIO IN  
Y
Y
VIDEO  
PB  
PR  
L
L
PB  
PR  
L
L
AUDIO  
AUDIO  
R
R
R
R
Note:  
• The terminal labeled "SERVICE ONLY", is exclusively used to update the software version.  
Front Panel Diagram  
This terminal is located under the front panel door. To access, push the arrow on the door to  
open.  
LAMP LED  
POWER LED  
LAMP  
POWER button  
INPUT-5  
CHANNEL VOLUME  
+
+
INPUT  
MENU  
VIDEO L/MONO  
PC IN  
R
AUDIO  
OPERATE  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Remote Control  
POWER  
D/A  
TV  
STB VCR DVD AUDIO  
INPUT  
MODE  
V1  
V2  
V3  
V4  
V5  
1
2
5
8
0
3
6
9
4
7
RETURN +  
TV  
TUNE  
– CH +  
– VOL +  
LIGHT  
MUTING  
OK  
DVR  
STATUS  
SOUND  
VIDEO  
GUIDE  
SUB CH  
TV/VCR  
C.C.  
SUB T.  
DISPLAY  
TWIN  
SLEEP  
ML/MTS  
SWAP  
SELECT  
FREEZE  
RTM-CV1400  
RM-C1400  
• For information on remote control buttons, see pages 59 - 69.  
• SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an  
ATSC antenna or Digital Cable, you can use these buttons.  
• This remote control is capable of operating many external device brands. See page 70 - 75  
for how to program the remote control.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
These quick setup pages will provide you, in three easy steps, with the basic information you  
need to begin using your new television right away. If you have questions, or for more detailed  
information on any of these steps, please consult other sections of this manual.  
Step 1 – The Remote Control  
Before you can operate your remote control, you first need  
to install the batteries (included).  
Raise the latch on the remote's back cover to remove.  
Insert two batteries, carefully noting the "+" and "–"  
markings. Place the "–" end in the unit first. Snap the  
cover back into place.  
When you change the batteries, try to complete the  
task within three minutes. If you take longer than  
three minutes, the remote control codes (ex. VCR,  
DVD) may have to be reset. See pages 70 - 75.  
POWER  
Basic Operation  
Turn the television on and off by pressing the POWER button at the top right corner  
of the remote. If this is the first time you are turning on the TV, the interactive  
plug-in menu appears.  
• At first, to watch your TV, select the TV mode by pressing the MODE button on  
the remote control before you turn the TV power on. See page 60.  
• See page 59 to 69 for details regarding the remote control buttons.  
Note:  
• If the lamp replacement message appears when you turn the television ON, see page 77.  
Using Menu Buttons  
To use the menu functions, press the MENU button. Next,  
select a menu using the four arrow keys. The four arrow keys  
are used only for menu selections.  
OK  
DVR  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Step 2 – Connecting Your Devices  
To make these connections, you will use plugs like the ones illustrated below.  
Component Cables  
Coaxial Cables  
Composite Cables  
Audio Cables  
Used to connect an  
external antenna or  
cable TV system to  
your TV.  
Used to connect audio/  
video devices like  
VCRs, DVD players,  
stereo amplifiers, game  
consoles, etc.  
S-Video Cable  
Used to make video  
connections with S-Video  
VCRs, Camcorders and  
DVD players.  
Notes:  
• The following connection diagrams are examples.  
• After you are finished connecting your devices, plug the power cord into the nearest power  
outlet and turn on the TV.  
• If you follow these diagrams and the television does not work properly, contact your local  
cable operator.  
To connect a DVD player, see VCR Connection.  
• If you have a satellite television system, refer to the satellite TV manual.  
No VCR Connection  
Cable or Antenna  
Output  
Coaxial Cable  
75Ω  
(VHF/UHF)  
TV Side Panel  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
VCR Connection  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 3.  
Diagram #1  
Cable or Antenna  
Output  
VCR  
V
L
R
IN  
IN  
OUT  
75Ω  
(VHF/UHF)  
OU
Coaxial Cable  
OR  
INPUT-3  
INPUT-4  
S-VIDEO  
OVER  
VIDEO  
TV Side Panel  
AUDIO IN  
Y
Y
P
B
R
L
L
P
B
R
AUDI
AUDIO  
P
R
R
P
Y
P
P
Green  
Blue  
B
R
Red  
AUDIO OUT  
OUT  
R
L
DVD Player  
Note:  
• If this connection setup does not work for you, try the connection setup on page 16.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Diagram #2  
Cable or Antenna  
Output  
VCR  
IN  
Two-Way Splitter  
(NOT SUPPLIED)  
OUT OUT  
V
L
R
IN  
IN  
OUT  
75Ω  
(VHF/UHF)  
OUT  
Coaxial Cable  
OR  
INPT-3  
INPUT-4  
TV Side Panel  
S-VIDEO  
OVER  
VIDEO  
AUDIO IN  
Y
Y
O  
P
B
L
L
P
B
R
AUDIO  
AUDIO  
P
R
R
R
P
Y
P
P
Green  
Blue  
B
R
AUDIO OUT  
Red  
OUT  
R
L
DVD Player  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a Camcorder  
You may connect a camcorder, game console or other equipment to your television by using  
the front input jacks (INPUT-5) located under the front panel door. To access, push on the  
door to open it. You can also connect these using the television’s side input jacks, using the  
same instructions.  
INPUT-5  
CHANNEL VOLUME  
+
+
CAMCORDER  
INPUT  
MENU  
VIDO L/MNO  
P
AO  
OPERATE  
TV Front Panel  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the front of the TV.  
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on  
the front of the TV.  
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on  
the front of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
L/MONO on the front of the TV.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an External Amplifier  
TV Side Panel  
Speaker  
Speaker  
AUDIO  
OUTPUT  
Amplifier  
L
R
1) Connect a white cable from the LEFT AUDIO OUTPUT on the side of the TV to the  
LEFT AUDIO INPUT on the amplifier.  
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the side of the TV to the  
RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
You can not output audio using the AUDIO OUTPUT under the following conditions:  
1) When you have digital sound from an HDMI device connected to the INPUT-1 or  
INPUT-2 connection on the side of your TV. (See page 20).  
2) When you have analog sound from a DVI device connected to the AUDIO IN "INPUT-1"  
connection. (See page 19).  
Connecting to an amplifier using your optical output  
You can connect an amplifier that has an optical digital input terminal by using an optical digital  
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.  
Amplifier  
TV Side Panel  
OPTICAL OUT  
Digital Audio  
1) Connect the optical cable from the side of the TV to the back of the amplifier.  
Notes:  
• This terminal can only output digital audio.  
• In order to use the optical output connection, select PCM or DOLBY DIGITAL on Digital  
Sound in the Digital Setup Menu. See page 49.  
• Refer to your owners manual on using your amplifier.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a Digital TV Receiver  
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in  
their digital form.  
After the connections have been made,  
tighten the screw to secure the cables.  
HDMI to DVI Cable  
DTV Decoder  
TV Side Panel  
DIGITAL OUT  
DIGITAL-IN  
AUOUT  
L
R
INPUT- 2  
INPUT-1  
AUDIO IN  
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to  
the HDMI INPUT-1 on the side of your television.  
2) Connect a red cable from the "R AUDIO OUT" on the back of your DTV Device, to the  
HDMI AUDIO IN "R" input terminal.  
3) Connect a white cable from the "L AUDIO OUT" on the back of your DTV Device, to the  
HDMI AUDIO IN "L" input terminal.  
• Personal computer compatibility cannot be guaranteed.  
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television  
with a DTV decoder.  
Notes:  
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance  
may be slightly shifted. Access the “HDMI SIZE” in the initial setup menu to adjust it. (Refer  
to page 47.)  
• When you do the above connection, set "VIDEO-1 AUDIO" in the Initial Setup menu to  
ANALOG. See "VIDEO-1 AUDIO", page 47.  
• The Analog Audio input can only be used with the HDMI INPUT-1.  
• When setting the “VIDEO-1 AUDIO – ANALOG / DIGITAL” menu setting on the TV, please  
note that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI  
adapter this connection must be made to the HDMI INPUT-1 along with analog audio cables.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an HDMI Compatible Device  
By connecting an HDMI compatible device, high definition pictures can be displayed on your  
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI  
compatible devices.  
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all  
digital audio/video interface. HDMI provides and interface between any audio/video source,  
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a  
digital television (DTV).  
HDMI Cable  
TV Side Panel  
DIGITAL-IN  
AUDIO OUT  
L
R
HDMI Compatible Device  
INPUT- 2  
INPUT-1  
AUDIO IN  
L
R
Connect the HDMI Cable from the DIGITAL OUT on your DTV or HDMI device, to the HDMI  
INPUT-1 or INPUT-2 on the side of your television.  
Notes:  
• When you do the above connection, set "VIDEO-1 AUDIO" in the Initial Setup menu to  
DIGITAL. See "VIDEO-1 AUDIO", page 47.  
• Some decoders may not respond depending on the equipment that you have connected  
when it is connected to the HDMI.  
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to  
480p/60Hz), the screen may turn green and there may be some distortion for a short time  
until the signal becomes stable.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an AV Receiver using your television's  
V3 Smart Input  
By connecting your AV Receiver to your television's V3 Smart Input, you can watch picture  
sources from many different devices, without having to change or use the other input  
connections on your TV. This allows you to free up the other input connections so you can  
connect more devices to your television.  
TV Side Panel  
AV Receiver  
INPUT-3  
MONITOR  
S-VIDEO  
Y
OUT  
OVER  
P
B
Y
VIDEO  
P
R
B
L
AUDIO  
R
MONITOR OU
P
R
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-3  
on the side of your television.  
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO  
INPUT-3 on the side of your television.  
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y  
VIDEO INPUT-3 on the side of your television.  
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the PB  
VIDEO INPUT-3 on the side of your television.  
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the PR  
VIDEO INPUT-3 on the side of your television.  
Note:  
• Please refer to your AV Receiver instruction manual for more information on connecting your  
speakers and other devices like a DVD player.  
• Use your AV Receiver's remote to switch to the different devices you have connected.  
• Some AV Receivers may not respond when the V3 Smart Input function is turned on.  
• If you have video connections for each input device connected to your AV Receiver, you  
should not connect them using both S-Video and Composite connection at the same time  
when you are using V3 Input as the V3 Smart Input. In this case we recommend using the  
S-Video connection.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to the computer  
This TV can be used as a computer screen. Use a commercially available D-SUB cable to  
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you  
want to listen to the sound from the computer, use a commercially available RCA cable to  
connect the INPUT-5 audio input terminal to the computer's audio output terminal.  
Computer  
INPUT-5  
CHANNEL VOLUME  
+
+
INPUT  
MENU  
VIDEO L/MONO  
PC IN  
R
AUDIO  
OPERATE  
TV Front Panel  
Notes:  
• Refer to your computer manual for a detailed explanation of the connections concerning your  
computer.  
• Make sure that the connectors are facing the correct way when connecting.  
• After connecting, tighten the two screws to fix the connectors in place.  
Looking at the images from a computer  
After starting the computer, press the V5 button on the remote control. You can listen to the  
sound when the sound from the computer is connected to the INPUT-5 AUDIO input terminal.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Table of signals for each type of computer  
Resolution  
Vertical  
Frequency  
(Hz)  
Horizontal  
Frequency  
(kHz)  
640 x 480  
(VGA)  
60.0  
60.0  
31.5  
48.4  
1024 x 768  
(XGA)  
• Only the above formats are supported.  
• Even with the above formats at 60 Hz, some problems may be experienced depending on  
the quality of the synchronous signal. (Depending on the quality, some pictures may not be  
displayed correctly).  
• Apple Macintosh* computers are not supported.  
When a picture is not displayed  
With some computers, some problems can be solved by changing the settings. Check the  
computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60  
Hz, can not be used with this TV. Refer to the computer's instruction manual.  
*Apple Macintosh is a registered trademark of Apple Computer, Inc.  
Note:  
• If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen.  
It appears when the input is PC and it is a single screen.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Step 3 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “AUTO” or “MANUAL” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Notes:  
• The interactive plug-in menu setting does not appear if your TV has been turned on before.  
In this case use the onscreen menus to perform these settings. See pages 40, 56, 30.  
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.  
Language  
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically  
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three  
languages: ENGLISH, FRANÇAIS (French) or ESPAÑOL (Spanish).  
LANGUAGE/LANGUE/IDIOMA  
®  
To choose a language:  
ENGLISH, FRANÇAIS or ESPAÑOL  
To NEXT (To set clock)  
ENGLISH  
NEXT  
SELECT OPERATE  
MENU  
EXIT  
(Continued...)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Auto Clock Set  
Before you use any of your TV’s timer functions, you must first set the clock. You may  
precisely set your clock using the XDS time signal broadcast by most public analog  
broadcasting stations. If you do not have this in your area, you will have to set the clock  
manually. See manual clock set below. To set the clock using the XDS signal:  
®  
To choose AUTO  
To TIME ZONE  
SET CLOCK  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or Hawaii)  
MODE  
TIME  
TIME ZONE  
D.S.T.  
AUTO  
-- ----  
:
ATLANTIC  
ON  
®  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
To NEXT (To Auto Tuner Setup)  
NEXT  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.  
• Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts  
your TV’s clock for Daylight Saving.  
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and  
receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose  
AUTO, see auto clock set above.  
®  
To choose MANUAL  
To TIME  
SET CLOCK  
®  
®  
To set the hour  
To minute  
To set the minute  
To TIME ZONE  
MODE  
TIME  
TIME ZONE  
D.S.T.  
MANUAL  
-- ----  
:
ATLANTIC  
ON  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or Hawaii)  
START CLOCK  
SELECT OPERATE  
To move to D.S.T. (Daylight Savings Time)  
MENU  
EXIT  
®  
To turn D.S.T. ON or OFF  
To START CLOCK  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(Continued...)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.  
AUTO TUNER SETUP  
®  
To choose CABLE or AIR (or SKIP when  
you skip Analog Auto Tuner Setup)  
TUNER MODE  
AIR  
To START  
After Analog Auto Tuner Setup is finished, Digital Auto  
Tuner Setup starts.  
START  
SELECT OPERATE  
MENU  
EXIT  
NOW  
Now Programming...  
20  
PROGRAMMING !  
48  
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your  
quick setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• If you want to cancel the Auto Tuner Setup, press the MENU button.  
• Noise muting will not work during Auto Tuner Setup.  
• If you choose SKIP, it finished without doing the Auto Tuner Setup.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending  
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is  
normal.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
® Left and right arrows mean:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping arrow” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The item that  
appears in green is the one currently selected. If you use the Menu button on the TV’s front  
panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT  
will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in menu” will  
appear the first time the TV is plugged in.  
INITIAL SETUP  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
SET LOCK CODE  
NEXT PAGE  
(4/5)  
EXIT  
MENU  
SELECT OPERATE  
Note:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. Examples of the onscreen  
menus are shown on the next page. Detailed explanations on using each menu follow later in  
this guide. For information about the interactive plug-in Menu, see pages 24 - 26.  
The Onscreen Menu System  
To open the onscreen menu system, press the MENU button on the remote control. You  
navigate within the onscreen menus by using the four directional arrow buttons on the remote  
control.  
The selected feature and option on a menu screen are highlighted in a different color.  
Selected Option  
(Green)  
Selected Option  
(Blue)  
ENG. FRAN. ESP.  
LANGUAGE  
CLOSED CAPTION  
To move to a different feature use the πarrows to move up or down the list. When you  
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen  
will appear. Use the arrows ® to select an option from the highlighted feature. Pressing  
MENU on the remote control will close the onscreen menu system and return you to normal  
television viewing.  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
• If you do not press any buttons for about a minute, the onscreen menu will automatically  
shut off.  
• Button names in this guide are shown in SMALL CAPITAL LETTERS.  
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.  
• Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
To INITIAL SETUP 03  
/
CLOCK TIMERS  
INITIAL SETUP  
INITIAL SETUP  
PREVIOUS  
PREVIOUS  
PREVIOUS  
HDMI SIZE  
VIDEO-1 AUDIO  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
AUTO  
DIGITAL  
SET CLOCK  
/
ON OFF TIMER  
LAMP TIMER RESET  
SET LOCK CODE  
NEXT PAGE  
(4/5)  
EXIT  
NEXT PAGE  
NEXT PAGE  
(1/5)  
MENU  
SELECT OPERATE  
MENU  
MENU  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
INITIAL SETUP 04  
CLOCK/TIMERS  
INITIAL SETUP 01  
INITIAL SETUP  
INITIAL SETUP  
SOUND ADJUST  
PREVIOUS  
TURN ON VOLUME  
VOLUME LIMIT  
PREVIOUS  
PREVIOUS  
NOISE MUTING  
ON  
OFF  
ON  
DIGITAL SETUP  
10  
40  
FRONT PANEL LOCK  
V3 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
OFF  
(2/5)  
RESET  
NEXT PAGE  
(5/5)  
EXIT  
NEXT PAGE  
NEXT PAGE  
(2/2)  
EXIT  
MENU  
MENU  
SELECT OPERATE  
SELECT OPERATE  
EXIT  
MENU  
SELECT OPERATE  
INITIAL SETUP 02  
INITIAL SETUP 05  
SOUND ADJUST 02  
PICTURE ADJUST  
PREVIOUS  
INITIAL SETUP  
SOUND ADJUST  
PREVIOUS  
PREVIOUS  
LANGUAGE  
STANDARD  
ENG. FRAN. ESP.  
TINT  
00  
00  
00  
00  
00  
00  
BASS  
00  
00  
00  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
TREBLE  
BALANCE  
OFF  
ON  
IRIS  
NEXT PAGE  
(1/3)  
EXIT  
NEXT PAGE  
(3/5)  
NEXT PAGE  
(1/2)  
EXIT  
MENU  
SELECT OPERATE  
MENU  
SELECT OPERATE  
EXIT  
MENU  
SELECT OPERATE  
PICTURE ADJUST 01  
INITIAL SETUP 03  
SOUND ADJUST 01  
PICTURE ADJUST  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
PREVIOUS  
DIGITAL VNR  
MPEG NR  
STANDARD  
COLOR TEMPERATURE  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
HIGH  
OFF  
OFF  
AUTO  
ON  
To INITIAL SETUP 04  
ADVANCED SMART PICTURE  
NATURAL CINEMA  
ON  
AUTO  
RESET  
NEXT PAGE  
(2/3)  
NEXT PAGE  
(3/3)  
MENU  
MENU  
EXIT  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
PICTURE ADJUST 02  
PICTURE ADJUST 03  
Notes:  
• The HDMI SIZE menu can only be displayed when a 480p picture signal is input to the HDMI  
terminal and the picture is being displayed on the screen.  
• ADVANCED SMART PICTURE menu cannot be displayed when DYNAMIC is selected for  
Video Status.  
• When the Menu button on the TV front panel is pressed, the FRONT PANEL CONTROL  
menu between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Auto Tuner Setup  
The auto tuner setup function is described on page 26 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
Press the MENU button  
AUTO TUNER SETUP  
π†  
®  
®  
To AUTO TUNER SETUP  
To operate  
TUNER MODE  
AIR  
To choose CABLE or AIR  
To START  
®  
To start the setup  
START  
OPERATE  
MENU  
SELECT  
EXIT  
The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.  
Press the Menu button when finished  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV.  
Regarding analog channels, you can add or delete channels from the line-up or prevent any  
unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the  
only channels that will appear are the ones that are broadcasting.  
Press the MENU button  
To CHANNEL SUMMARY  
To operate  
Analog Channels  
CHANNEL SUMMARY  
π†  
CHNO. SCAN  
01  
ID  
CHNO. SCAN  
ID  
HBO  
®  
06  
The Channel summary screen will now be displayed with  
the channels set to scan marked with an “”. Regarding  
analog channels, you can delete channels from the scan  
by removing the “”. If any channels were missed during  
auto tuner setup and you wish to add them, you may by  
placing an “” next to the channel number.  
02  
03  
04  
05  
MTV  
07  
08  
09  
10  
L
A&E  
E!  
OK  
MENU  
SELECT  
OPERATE  
EXIT  
Digital Channels  
• Digital channels can not be added to the channel  
summary if the auto tuner setup did not find them.  
Channel Summary Digital  
CH No.  
D01  
Scan  
Station Name  
FOX  
π® To the SCAN column  
Press the OK button to include or delete from  
scan  
D02  
ABC  
D02  
CNN  
D10-1  
D10-2  
D12345  
NBC  
BOX  
Press the MENU button when finished  
NHK  
OK Operate  
BACK Back  
MENU Exit  
Select  
Note:  
• The number of a digital channel may change,  
depending on the time of some broadcastings. If  
this channel existed and now has disappeared,  
the lock channel or scanned channel mark by  
the channel summary for that channel will be  
cancelled.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
How to set the channel label. (This is only for analog broadcasting.)  
Press the MENU button  
ID  
π†  
®  
®  
To CHANNEL SUMMARY  
To operate  
To the ID column  
CHANNEL 09  
RESET  
Press the OK button to enter  
OK  
PRESS TO FINISH  
®  
π†  
To select the character you want  
To move to the next space  
MENU  
SELECT OPERATE  
EXIT  
...continue to follow these directions for all four  
spaces  
Press the OK button to finish  
Your characters are now set  
Press the MENU button when finished  
If you want to reset the characters you set:  
Press the MENU button  
π†  
®  
®  
To CHANNEL SUMMARY  
To operate  
To the ID column  
Press the OK button to enter  
To select RESET  
π†  
Press the OK button to finish  
Your characters are now reset  
Notes:  
You can use characters for: Alphabet, numbers, marks and spaces.  
• It is possible to set the maximum of 40 channel labels.  
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will  
appear.  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
To CHANNEL SUMMARY  
To operate  
®  
π® To the Lock Column (  
)
Press the ZERO button to lock or unlock that channel  
Press the MENU button when finished  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
THIS CHANNEL IS LOCKED BY  
Lock Code using the 10 key pad.  
CHANNEL GUARD.  
If the wrong code is entered, the message  
PLEASE ENTER LOCK CODE BY  
“INVALID LOCK CODE!” will flash on the screen.  
10 KEY PAD TO UNLOCK IT.  
The channel cannot be accessed until the correct code  
NO. - - - -  
is entered.  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”, page 39.  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from DVD discs or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 34 for information on  
how to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings (for programming broadcast from the United States), Canadian  
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use  
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting  
each of the three V-Chip formats appear in the next six pages along with descriptions of the  
rating categories.  
To access the rating categories:  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
To operate (Lock icon  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
will appear)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
To turn V-Chip ON or OFF (V-Chip must be  
turned ON for rating settings to operate)  
π†  
To move to SET US TV RATINGS,  
SET MOVIE RATINGS, or  
MENU  
SELECT OPERATE  
EXIT  
SET CANADIAN RATINGS (see following  
pages for descriptions of each item)  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to BLOCK.  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
V-CHIP  
OFF  
V-CHIP  
π†  
To V-CHIP  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
®  
To operate (The lock icon  
appears)  
Press ZERO to access V-Chip setup options  
VIEW  
π†  
To UNRATED  
®  
To VIEW or BLOCK  
MENU  
SELECT OPERATE  
EXIT  
Press MENU when done  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be able  
to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or no  
violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Setting US V-Chip Ratings  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
To operate (lock icon  
appears)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
π†  
®  
To turn V-Chip ON or OFF  
To move to SET US TV RATINGS  
To operate  
MENU  
SELECT OPERATE  
EXIT  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the πor ® to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the  
icon appears instead of a “—”.  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
SET US TV RATINGS  
π® To the TV 14 Column  
TV  
TV  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
Press the OK button to lock  
MA 14  
Press the MENU button when finished  
V/FV  
S
L
Note:  
D
• If you want to change the setup, move the cursor to  
the top column and change the lock icon to “—” by  
pressing OK again. You may then select individual  
categories to block.  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur producers  
who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating may  
include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (Lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET MOVIE RATINGS  
To enter movies menu  
For example: To block viewing of programming rated  
NC-17 shows, move the cursor to the NC-17 column and  
add a lock icon. Once you've put a lock on the NC-17  
column, X column is automatically locked.  
SET MOVIE RATINGS  
N
P
G13  
X
C17  
R
PG  
G
π® To the NC-17 Column  
Press the OK button to lock  
NR  
Press the MENU button to finish  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
• If you want to change the setup, move the cursor to the  
column and change the lock icon to “—” by pressing OK again.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and  
early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET CANADIAN RATINGS ENG (for English)  
To enter ratings menu  
For example: To block viewing of programming rated 14+ shows, move the cursor to the 14+  
column and add a lock icon. Once you've put a lock  
on the 14+ column, 18+ column is automatically  
SET CANADIAN RATINGS ENG  
locked.  
P
C
8
G
C
18+  
14+  
G
®  
To the 14+ Column  
Press the OK button to lock  
Press the MENU button to finish  
MENU  
OK  
EXIT  
SELECT  
OPERATE  
Notes:  
• If you want to change the setup, move the cursor  
to the column and change the lock icon to “—” by pressing OK again.  
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 38 in the  
French user’s guide.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.  
To change the lock code, follow the steps below.  
Press the MENU button  
SET LOCK CODE  
π†  
To SET LOCK CODE  
To operate (lock icon  
LOCK CODE  
0000  
®  
appears)  
Press ZERO to access the lock code  
The first digit will be highlighted  
OK  
PRESS  
TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
®  
π†  
To select the number  
To move to the next digit  
Continue to follow these directions for all four numbers  
Press the OK button to finish (your lock code is now set)  
Press the Menu button when finished  
When a viewer attempts to watch a blocked channel, this message appears:  
THIS PROGRAMMING EXCEEDS  
YOUR RATING LIMITS.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
The channel will remain blocked until the correct lock code is entered (see above for  
information on setting your lock code).  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Language  
The language function is described on page 24 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Press the Menu button  
INITIAL SETUP  
PREVIOUS  
π†  
To LANGUAGE  
LANGUAGE  
ENG. FRAN. ESP.  
®  
To choose a language: ENG. (English),  
FRAN. (French) or ESP. (Spanish)  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below. There are three methods. When you are watching  
analog channels, you can perform Analog Setting of closed caption. When you are watching  
digital channels, you can perform Digital Auto Setting or Digital Manual Setting.  
Analog Setting  
Press the MENU button  
CLOSED CAPTION  
π†  
®  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To enter  
To MODE  
To select CAPTION or TEXT in MODE  
To CAPTION or TEXT  
To select a caption (CC1 to CC4) or text  
channel (T1 to T4)  
MODE  
TEXT  
CC1  
T1  
CAPTION  
TEXT  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
Press the MENU button when finished  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Digital Auto Setting  
Press the MENU button  
Digital Closed Caption  
Preview  
π†  
To CLOSED CAPTION  
To enter  
To Type  
Closed Caption Sample  
®  
π†  
®  
Type  
Auto  
1
Service  
Appearance  
To select Auto, Advanced or Basic  
Auto: Shows closed caption a priority for  
digital channels over analog channels. It is  
set automatically.  
Cancel  
Set  
Operate BACK Back  
MENU Exit  
Select  
Advanced: Shows only the digital closed  
caption.  
Basic: Shows only the analog closed  
caption.  
Digital Closed Caption > Appearance  
Preview  
Closed Caption Sample  
Appearance Mode  
Font  
Auto  
π†  
®  
π†  
®  
®  
π†  
To Service  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select Auto  
To Set  
Colors  
Opacities  
Cancel  
Set  
BACK Back  
MENU Exit  
Select  
Operate  
Press the OK button to save  
The font/type and color are set automatically.  
Press the MENU button when finished  
Note:  
• If you want to cancel the settings, select cancel.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Digital Manual Setting  
Press the MENU button  
Digital Closed Caption  
Preview  
>
Appearance  
π†  
To CLOSED CAPTION  
Closed Caption Sample  
®  
π†  
®  
π†  
®  
π†  
®  
®  
π†  
®  
π†  
®  
To enter  
To Type  
Appearance Mode  
Manual  
Font  
Colors  
Opacities  
To select Auto, Advanced or Basic  
To Service  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select Manual  
To Font  
To enter  
To select Font Size or Font Style  
To select the setting you like  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Font Size  
Standard  
Auto  
Appearance Mo
Font  
Font Style  
Colors  
Font Size: Auto, Standard, Large or Small  
Cancel  
Set  
Opacities  
Cancel  
Font Style: Auto, Serif Mono, Serif, SanSerif Mono,  
SanSerif, Casual, Cursive or Small Capital  
π†  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
To Set  
Press the OK button to save  
π†  
®  
π†  
®  
To Colors  
To enter  
To select Text, Edge or Background  
To select the setting you like  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Text  
Appearance Mo
White  
White  
Black  
Edge  
Auto, White, Black, Red, Green, Blue,  
Yellow, Magenta or Cyan  
Font  
Background  
Cancel  
Colors  
Opacities  
Set  
π†  
To Set  
Cancel  
Set  
Press the OK button to save  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
π†  
®  
π†  
®  
To Opacities  
To enter  
To select Text/Edge or Background  
To select Auto, Transparent, Translucent, Solid  
or Flashing  
All fonts used for digital closed  
caption and digital menus are  
licensed from Monotype Imaging  
Inc.  
π†  
π†  
To Set  
Press the OK button to save  
To Set  
Press the OK button to save  
Press the MENU button when finished  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs may  
include additional text information which is usually found on text channel T1. The other channels  
are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are playing  
a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 66.  
• When ZOOM aspects like PANORAMA or CINEMA are selected, Digital Closed Captions may be  
cut off or distorted.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
LANGUAGE  
ENG. FRAN. ESP.  
π†  
®  
To AUTO SHUT OFF  
To turn ON or OFF  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
• If the channel that you have on does not receive a  
signal for more than one minute, the blinking text  
“NOT RECEIVING A SIGNAL AUTO SHUT OFF  
IN 9 MIN.” appears on the screen, and starts the  
countdown. If no signal is being received within 10  
minutes, the TV shuts itself off.  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
XDS ID  
XDS ID Display provides a channel’s call letters, the network’s name, and even a program  
name. The XDS ID information is provided by the broadcaster.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
LANGUAGE  
ENG. FRAN. ESP.  
π†  
®  
To XDS ID  
To turn ON or OFF  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
Noise Muting  
This feature inserts a blank gray screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To NOISE MUTING  
To turn noise muting ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V3 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Press the MENU button when finished  
OFF  
NEXT PAGE  
(2/5)  
MENU  
Notes:  
SELECT OPERATE  
EXIT  
• Noise muting will not work during auto tuner setup or  
when you operate channel summary.  
• Noise muting will not work when the digital TV is displayed.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Front Panel Lock  
This allows you to lock the keys on the front of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To FRONT PANEL LOCK  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V3 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
You can turn off this feature in the following ways:  
OFF  
NEXT PAGE  
(2/5)  
• Unplug the power cord, and plug it back in. Do this if  
your batteries die, or you lose your remote control.  
MENU  
SELECT OPERATE  
EXIT  
• Use the remote control.  
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD  
for FRONT PANEL LOCK will appear.  
Note:  
To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will  
remain ON.  
V3 Smart Input  
This feature is used if you have connected an AV Receiver to your television. By turning this  
feature on, your television can automatically detect the signal source from your components  
that are connected to your AV Receiver.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To V3 SMART INPUT  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V3 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Notes:  
OFF  
NEXT PAGE  
(2/5)  
• If you do not have an AV Receiver connected to your  
television, turn this feature OFF.  
MENU  
SELECT OPERATE  
EXIT  
• Some AV Receivers may not work with this function.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Video Input Label  
This function is used to label video input connections for the onscreen displays.  
Press the MENU button  
To VIDEO INPUT LABEL  
To enter  
INITIAL SETUP  
PREVIOUS  
π†  
®  
π†  
®  
NOISE MUTING  
FRONT PANEL LOCK  
V3 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
ON  
OFF  
ON  
To select the desired video input  
OFF  
To select the desired preset input label (see  
chart below)  
NEXT PAGE  
(2/5)  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
VIDEO INPUT LABEL  
Press the MENU button when finished  
VCR  
DVD  
SAT  
GAME  
STB  
VIDEO-1  
VIDEO-2  
VIDEO-3  
VIDEO-4  
VIDEO-5  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
Preset  
Labels  
Select when...  
VCR  
DVD  
PVR  
You have a VCR connected to the video input  
You have a DVD connected to the video input  
You have a Personal Video recorder connected to the video input  
You have a Digital VCR connected to the video input  
You have a Set-top Box connected to the video input  
You have a Satellite Receiver connected to the video input  
You have an Amplifier connected to the video input  
You have a Video Game connected to the video input  
You have a Video Camera connected to the video input  
You have a Video Disc player connected to the video input  
DVHS  
STB  
SAT  
AMP  
GAME  
CAM  
DISC  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically  
when the aspect is set to panorama or cinema.  
Press the MENU button  
π†  
®  
To POSITION ADJUSTMENT  
To enter  
π® To adjust the position  
Press the MENU button to finish  
Notes:  
OK  
MENU  
RESET  
EXIT  
OPERATE  
To reset the adjustment to the center, press the  
OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at its  
maximum limit.  
• If you select REGULAR, SLIM and FULL size with aspect or Multi Screen, position  
adjustment option is not seen.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically and horizontally when  
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals, or when PC  
mode is set.  
• It is also possible to use Position Adjustment when you are in PC Mode  
• When you are receiving a 1080p signal, Position Adjustment can not be selected.  
Power Indicator  
Power indicator allows you to adjust the brightness of the power indicator  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
NOISE MUTING  
ON  
OFF  
ON  
πTo POWER INDICATOR  
FRONT PANEL LOCK  
V3 SMART INPUT  
®  
To adjust POWER INDICATOR LOW, HIGH  
or OFF  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Notes :  
• When OFF is selected :  
OFF  
NEXT PAGE  
(2/5)  
The LED disappears if you have a TV signal.  
The LED is lit as “LOW” when there is no TV signal.  
MENU  
SELECT OPERATE  
EXIT  
• When the On Timer turns ON, the LED is lit as  
"LOW" when you turn the power off.  
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
HDMI Size  
The HDMI SIZE option can only be displayed in the INITIAL SETUP menu when an HDMI  
480p picture signal is being input to the HDMI terminal. This option adjusts the position when  
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of  
HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted,  
the position can be adjusted by selecting AUTO, SIZE1 or SIZE2.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
HDMI SIZE  
π†  
®  
π†  
To HDMI SIZE  
AUTO  
DIGITAL  
VIDEO-1 AUDIO  
To enter  
To select AUTO, SIZE1 or SIZE2  
Press the MENU button to finish  
NEXT PAGE  
(1/5)  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• The HDMI SIZE menu can only be displayed when a HDMI or DVI 480p picture signal is input  
to the HDMI terminal and the picture is being displayed on the screen.  
You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the  
television will select "SIZE1" or "SIZE2" automatically.  
Video-1 Audio  
This feature is used if you have a DVI or HDMI compatible component connected to your TV.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
HDMI SIZE  
VIDEO-1 AUDIO  
π†  
®  
To VIDEO-1 AUDIO  
To select ANALOG, DIGITAL or AUTO  
AUTO  
DIGITAL  
Press the Menu button when nished  
Notes:  
NEXT PAGE  
(1/5)  
• If your DVI or HDMI component is capable of digital  
audio and video, choose DIGITAL. If your DVI or HDMI  
MENU  
SELECT OPERATE  
EXIT  
component is capable of analog audio and digital video, choose ANALOG.  
• Refer to your DVI or HDMI component’s instruction manual for more information.  
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,  
depending on the audio input from the HDMI.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Digital Setup  
Use this function when you are receiving a digital broadcast.  
Press the MENU button  
Digital Setup  
Antenna Level  
π†  
To DIGITAL SETUP  
To enter  
Digital Sound  
PCM  
®  
Software Version  
The onscreen will appear  
Notes:  
Software Update  
• Software Update will only appear when the USB  
memory is inserted into the USB connector.  
Operate BACK Back  
MENU Exit  
Select  
• If you are watching an analog channel, you can still  
access the digital setup menu at anytime, while you are doing this, the background screen  
will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital  
setup menu.  
Antenna Level  
Confirms the present antenna level.  
Antenna Level  
Press the MENU button  
75  
π†  
To DIGITAL SETUP  
To enter  
BACK  
MENU  
®  
Back  
Exit  
π†  
To Antenna Level  
To enter  
®  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Digital Sound  
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV  
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,  
you can enjoy listening in 5.1ch sound when watching digital broadcasts.  
Press the MENU button  
π†  
®  
To DIGITAL SETUP  
To enter  
π†  
To Digital Sound  
®  
To select PCM or DOLBY DIGITAL  
Press the MENU button when finished  
Notes:  
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select  
PCM, it cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 18.  
Manufactured under license from Dolby Laboratories. "Dolby", and  
the double-D symbol are trademarks of Dolby Laboratories.  
Software Version  
You can confirm the Software Version.  
Press the MENU button  
π†  
®  
To DIGITAL SETUP  
To enter  
π†  
®  
®  
To Software Version  
To enter  
Select close when you are finished confirming your software version  
Press the MENU button when finished  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Software Update  
At first, connect the USB memory into the USB connector. This function will appear only when  
the USB memory is inserted into the USB connector.  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To DIGITAL SETUP  
To enter  
To Software Update  
To enter  
Checks if it needs an update or not  
Press the MENU button when finished  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
TINT  
Tint allows you to adjust the levels of red and green in your TV picture.  
COLOR  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
PICTURE  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
BRIGHT  
You can adjust the overall brightness of the TV picture with the Bright control.  
DETAIL  
The Detail feature adjusts the level of fine detail displayed in the picture.  
IRIS  
The IRIS adjusts the level of brightness on the TV screen.  
Adjust the Picture Settings  
Press the MENU button  
PICTURE ADJUST  
π†  
To TINT, COLOR, PICTURE, BRIGHT,  
DETAIL or IRIS  
To enter  
PREVIOUS  
TINT  
STANDARD  
00  
00  
00  
00  
00  
00  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
®  
+02  
TINT  
IRIS  
NEXT PAGE  
(1/3)  
EXIT  
®  
π†  
π†  
To adjust the setting  
To back to the picture main menu  
To move to the next setting  
MENU  
SELECT OPERATE  
Press the MENU button when finished  
Note:  
• There are four video status settings: Dynamic, Standard, Theater and Game. Each video  
status setting has a separate memory for HD (1080i/1080p/720p) and SD (480p/480i) video  
signal. Each video status can be chosen along with your favorite picture settings (Tint,  
Color, Picture, Bright, Detail, etc.) See page 66 for details.  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
COLOR TEMPERATURE  
LOW  
π†  
®  
π†  
To COLOR TEMPERATURE  
To enter  
To set LOW or HIGH  
HIGH  
Press the MENU button when finished  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Color Management  
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated  
to produce natural hues.  
Press the MENU button  
COLOR MANAGEMENT  
ON  
π†  
®  
π†  
To COLOR MANAGEMENT  
To enter  
To select the mode “ON" or "OFF"  
OFF  
Press the MENU button when finished  
Dynamic Gamma  
JVC's Dynamic Gamma Circuitry (DGC) makes it easier to see dark areas when a picture  
has many dark areas, and makes it easier to see the bright areas when a picture has many  
bright areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness  
balance, especially in dark areas where the level of grayscale is often lost, turning completely  
to black DGC automatically enhances the detail in these dark areas providing a more dynamic  
image with ner detail, so the optimum picture settings are automatically set for each picture.  
Normally use with DGC on.  
Press the MENU button  
DYNAMIC GAMMA  
ON  
π†  
®  
π†  
To DYNAMIC GAMMA  
To enter  
To turn ON or OFF  
OFF  
Press the MENU button when finished  
Advanced Smart Picture  
Advanced Smart Picture detects the APL (Average Picture Level) and adjusts the level of  
brightness on the TV screen suitable for what you are watching.  
Press the MENU button  
ADVANCED SMART PICTURE  
ON  
π†  
®  
π†  
To ADVANCED SMART PICTURE  
To enter  
To select the mode "ON" or "OFF"  
Press the MENU button when finished  
OFF  
Note:  
• When you have "DYNAMIC" selected in the "VIDEO STATUS", Advanced Smart Picture is  
not selected.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a program  
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges  
of these programs, choose NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct  
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the  
television rate of 30 frames-per-second.  
NATURAL CINEMA  
Press the MENU button  
AUTO  
π†  
®  
π†  
To NATURAL CINEMA  
To enter  
To select the mode “AUTO", "ON" or "OFF”  
ON  
OFF  
Press the MENU button when finished  
Notes:  
• When you are receiving a 1080p signal, Natural Cinema can not be selected.  
• The natural cinema mode is automatically set to “AUTO” in the following cases:  
- Turning on or off  
- Changing the channel or input mode  
• If you are in PC mode, Natural Cinema can not be used.  
Digital VNR  
This function can be selected to change the effect of Digital VNR (Video Noise Reduction).  
Press the MENU button  
DIGITAL VNR  
AUTO  
MIN  
π†  
®  
π†  
To DIGITAL VNR  
To enter  
To select the effect you like.  
MAX  
OFF  
AUTO: adjusts the effect of VNR automatically.  
MIN: adjusts the effect of VNR to minimum.  
MAX: adjusts the effect of VNR to Maximum.  
OFF: turns the effect of VNR off.  
Press the MENU button when finished  
Notes:  
• If it is in PC, Digital VNR will not be displayed.  
• When you are receiving a 1080p signal, Digital VNR can not be selected.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
MPEG NR  
This function effects the block noise removal and mosquito NR (Noise Reduction)  
simultaneously.  
Press the MENU button  
MPEG NR  
ON  
π†  
®  
π†  
To MPEG NR  
To enter  
OFF  
To select ON or OFF  
Press the MENU button when finished  
Notes:  
• When you are receiving digital channels, block noise removal will have no effect.  
• When you are receiving a 1080p signal, MPEG NR can not be selected.  
Reset  
Reset resets all picture adjustments (Tint, Color, Picture, Bright, Detail, Iris, Color Temperature,  
Color Management, Dynamic Gamma, Advanced Smart Picture, Digital VNR and MPEG NR) at  
once to the default settings.  
PICTURE ADJUST  
Press the MENU button  
PREVIOUS  
DIGITAL VNR  
MPEG NR  
STANDARD  
π†  
®  
To RESET  
To enter  
AUTO  
ON  
The onscreen menu disappears for a moment,  
and then the settings are reset to the default  
setting for all the picture adjustments.  
RESET  
NEXT PAGE  
(3/3)  
MENU  
Press the MENU button when finished  
SELECT OPERATE  
EXIT  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the  
balance setting.  
Adjust the Sound Settings  
Press the MENU button  
SOUND ADJUST  
PREVIOUS  
π†  
®  
π†  
To BASS, TREBLE or BALANCE  
To adjust the setting  
To move to the next setting  
BASS  
00  
00  
00  
TREBLE  
BALANCE  
Press the MENU button when finished  
NEXT PAGE  
(1/2)  
EXIT  
Note:  
MENU  
SELECT OPERATE  
You can reset the sound adjustments (BASS, TREBLE  
and BALANCE) you set at once as the default setting  
when you select reset.  
You can adjust BALANCE only when A.H.S.+ is off. See page 65.  
Turn On Volume  
Turn On Volume allows you to set the volume level when you turn the TV on.  
Press the MENU button  
π†  
®  
To TURN ON VOLUME  
To set  
Current  
00  
01  
02  
03  
48  
49  
50  
Press the MENU button to finish  
Volume Limit  
Volume Limit allows you to set the maximum volume level.  
Press the MENU button  
π†  
®  
To VOLUME LIMIT  
To set the maximum volume level  
00  
01  
02  
03  
48  
49  
50  
Press the MENU button to finish  
Reset  
Reset resets all Sound Adjustments (Bass, Treble, Balance, Turn On Volume and Volume Limit)  
at once to the default settings. See page 54 on how to use reset.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Set Clock  
The set clock function is described on page 25 as the interactive plug-in menu. You can choose  
to set the clock automatically or manually. If you need to set the clock again, follow the steps  
below.  
Press the MENU button  
π†  
®  
To SET CLOCK  
To enter  
When you set the clock automatically, choose AUTO by pressing the  
or  
®
arrows.  
π†  
®  
To TIME ZONE  
To select your time zone  
ATLANTIC  
SET CLOCK  
EASTERN  
CENTRAL  
MOUNTAIN  
HAWAII  
ALASKA  
PACIFIC  
MODE  
TIME  
TIME ZONE  
D.S.T.  
AUTO  
π†  
®  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
-- ----  
:
ATLANTIC  
ON  
Press OK to finish  
OK  
PRESS TO FINISH  
Press the MENU button when finished  
MENU  
SELECT OPERATE  
EXIT  
When you set the clock manually, choose MANUAL by  
pressing the or arrows.  
®
π†  
®  
π†  
®  
π†  
®  
To move to the hours  
To set the hours  
To move to minutes  
To set the minutes  
To TIME ZONE  
To select your time zone:  
SET CLOCK  
(Atlantic, Eastern, Central, Mountain, Pacific,  
Alaska or Hawaii)  
MODE  
TIME  
TIME ZONE  
D.S.T.  
MANUAL  
π†  
To D.S.T. (daylight savings time)  
-- ----  
:
®  
To turn D.S.T. ON or OFF  
Press OK to start clock  
ATLANTIC  
ON  
THANK YOU !!  
OK  
PRESS TO START CLOCK  
MENU  
SELECT OPERATE  
EXIT  
Press the MENU button when finished  
Notes:  
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.  
• Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts  
your TV’s clock for Daylight Saving.  
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and  
receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Press the MENU button  
ON/OFF TIMER  
π†  
®  
®  
To ON/OFF TIMER  
7:00 PM  
10:00 PM  
03  
ON TIME  
OFF TIME  
CHANNEL  
ON VOLUME  
MODE  
To enter (begins with ON TIME)  
CURRENT  
EVERYDAY  
NO  
To set the hour (AM/PM) you want the TV to  
turn on  
ON/OFF TIMER  
π†  
®  
π†  
To move to minutes  
To set the minutes  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the  
OFF TIME the same way as ON TIME  
π†  
®  
π†  
®  
π†  
®  
To accept OFF TIME and move to CHANNEL  
To select channel  
To ON VOLUME  
To set the volume level  
To move to MODE  
Choose ONCE or EVERYDAY  
π†  
To ON/OFF TIMER  
®  
Choose YES to accept the timer setting, choose NO if you don’t wish to accept  
Press the OK button to finish  
Press the MENU button to exit the menu  
Notes:  
• The on/off timer cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Lamp Timer Reset  
The lamp replacement message will appear when you need to change the lamp. After you  
replace the lamp, you need to reset the timer which is built into your television.  
Press the MENU button  
/
CLOCK TIMERS  
PREVIOUS  
SET CLOCK  
π†  
To LAMP TIMER RESET  
To Enter  
/
ON OFF TIMER  
®  
LAMP TIMER RESET  
The following message will appear.  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
PRESS OK TO RESET THE LAMP  
TIMER.  
Press the OK button while the above message appears on the television screen.  
THE LAMP TIMER IS RESET  
SUCCESSFULLY.  
The lamp timer has now been reset.  
Notes:  
You can use the Lamp Timer Reset only after replacing the lamp.  
• See Page 77 for instructions on lamp replacement.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Note:  
• After turning the power on, you can not turn the power off for about one minute.  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 12:  
1 (One)  
2 (Two)  
Tune  
Lets you decide the input channel and select it. After you press the number buttons on the  
remote, press the TUNE button. For example, to move to channel 12:  
1 (One)  
2 (Two)  
Press the TUNE button  
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to receive.  
To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or  
CH–. The channels will zip by at a rate of five channels per second.  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level. The maximum is the level you set in  
Volume Limit. See page 55.  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
D/A (Digital/Analog)  
The D/A button changes the analog and digital channel. Digital channels have a "D" in front of  
the channel number.  
Press the D/A button  
By every press of the D/A button, you can switch between analog and digital  
channels.  
To watch digital channels  
For example, to move to channel D23:  
Press 2 (Two)  
Press 3 (Three)  
Press the TUNE button  
Mode  
Your remote control can be used to operate some basic functions of your external devices. To  
use your device, select the proper mode.  
Press the MODE button  
By every press of the Mode button, you can select the mode.  
TV  
STB  
VCR  
DVD  
AUDIO  
• The indicator on the remote control lights for 3 seconds each time the remote control is  
operated.  
MODE  
Device  
TV  
TV  
STB  
VCR  
VCR/DVR  
DVD  
DVD Player  
(DVD Recorder)  
AUDIO  
Amplifier/Home  
Theater in Box  
STB/DVR  
(Cable Satellite)  
• The mode light, except for TV lights to indicate which mode is selected.  
Input  
Selects the signal input source for the television: VIDEO-1, 2, 3, 4 or 5 for video devices like  
VCRs, DVD players or camcorders.  
Press the V1, V2, V3, V4 or V5 button  
Notes:  
• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL  
+/– button.  
You can also access by pressing the INPUT button on the front of the TV instead of the  
remote control.  
• If you have a PC connected to the TV, select VIDEO-5 (V5).  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Return +/TV  
The RETURN+/TV button has three functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CH– buttons.  
TV - Returns to the TV mode.  
Press the RETURN+/TV and hold for three seconds  
RETURN CHANNEL  
PROGRAMMED!  
The channel currently active has been programmed as your return+ channel. Now scan  
through the channels using the CHANNEL+/– buttons.  
Press the RETURN+/TV  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The  
message “RETURN CHANNEL CANCELLED!” will appear.  
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel  
return+.  
Light  
All remote control buttons are illuminated, except for the Light button. Press the LIGHT button  
to turn the illumination on for 5 seconds.  
Menu  
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Favorite  
The Favorite button allows you to select your favorite channels easily. First, you must register  
the channels that you like. See how to register below.  
Press the FAVORITE button  
FAVORITE  
The favorite channel list will appear.  
PREVIOUS  
π†  
To select the channel you want to watch  
101  
102  
D103  
<
CBS  
FOX  
PBS2  
>
Press the OK button  
It will change to the channel you have selected.  
D107  
8
HBO  
ABC  
Register the favorite channel  
Press the channel number you want to register  
The channel program will change.  
NEXT  
Press the FAVORITE button for three seconds  
The channel will be registered in the favorite channel list.  
Notes:  
• Both analog and digital channels can be registered. The digital channels have a "D" in front  
of the channel number.  
• The maximum number of channels you can register is 24.  
• If you have registered the maximum number of channels, and try to register more channels,  
the oldest channel you registered will be deleted.  
• Sub channels can not be registered.  
• The newest channel you registered will appear at the top of the list.  
Delete the favorite channel  
Press the FAVORITE button  
The favorite channel list will appear.  
π†  
®  
To select the channel you want to delete  
To enter  
Press the FAVORITE button  
The channel was deleted.  
Note:  
• Before pressing the FAVORITE button when you are finished, press the ® button again, and  
you can return to the deleted channel.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
PANORAMA - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
REGULAR - The regular ratio is used  
when you want to watch a 4:3 broadcast  
or recorded program without modifying the  
original picture to fit the dimensions of your  
16:9 screen. The 4:3 picture will fill the  
screen from top to bottom, while black bars  
will appear to fill up the remaining space  
along the picture’s sides. The 4:3 picture  
will be centered within the boundaries of the  
16:9 screen.  
CINEMA - This ratio “zooms in” on the  
center part of a 4:3 aspect picture, blowing  
it up to fill the 16:9 screen.  
SLIM - This aspect mode shrinks the  
screen of 16:9 to 4:3. There are some  
programming that is already stretched by  
mistake at broadcasting companies, so  
this mode corrects it. Black side bars will  
appear.  
FULL - This is the ratio to use when  
watching 16:9 High-Definition broadcasts.  
PANORAMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
Aspect Ratios in PC Mode  
REGULAR - This is the original aspect  
mode.  
CINEMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
FULL - This aspect mode stretches the  
image to fit the dimensions of the 16:9  
aspect screen.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
PC  
ATSC (480i, 480p)  
SD (480i, 480p)  
HD (1080i, 720p)  
NTSC, 480i, 480p  
ATSC (1080i, 720p)  
ASPECT  
PANORAMA ZOOM  
CINEMA ZOOM  
FULL  
ASPECT  
PANORAMA ZOOM  
CINEMA ZOOM  
FULL  
ASPECT  
ASPECT  
PANORAMA  
CINEMA  
FULL  
REGULAR  
FULL  
SLIM  
REGULAR  
Notes:  
You can also choose the size by pressing the πbuttons.  
• When you change the aspect ratio or signal, reset the picture position to center.  
You can also access the FRONT PANEL CONTROL screen by using the MENU button  
on the front of the TV instead of the remote control. It appears between INITIAL SETUP  
and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose  
ASPECT by pressing Menu  
+/- buttons.  
on the front panel and choose a mode by using the CHANNEL  
• "SLIM" can only be displayed when the signal is ATSC (480i or 480p).  
• If the television receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you  
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect  
mode after the television changed it to FULL automatically, the television will change to the  
aspect mode you choose.  
• When you are receiving a 1080p signal, you can not change the aspect ratios.  
Guide  
You can view the program from the GUIDE.  
Notes:  
The GUIDE function will only work when you are receiving digital programming only.  
• The GUIDE will not show the correct time and date if you have not performed the set clock  
function on your television. See page 56.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Sound  
By pressing the SOUND button, you can change the A.H.S.+ (Advanced Hyper Surround plus)  
mode, A.T.C. (Advanced Tone Correction), SMART SOUND and HYPER BASS on or off.  
A.H.S.+ - Adds a more spacious surround sound. Music gives basic effect and movie for more  
effect.  
A.T.C. - Reproduces distinctive sounds with tone correction.  
SMART SOUND - Decreases high sound levels, giving a regulated sound level.  
HYPER BASS - Increases bass levels, giving a richer, deeper bass.  
SOUND EFFECT  
Press the SOUND button  
A.H.S.+  
MOVIE MUSIC OFF  
ON OFF  
π†  
To select A.H.S.+, A.T.C., SMART SOUND or  
HYPER BASS  
A.T.C.  
SMART SOUND  
HYPER BASS  
ON OFF  
ON OFF  
MENU  
®  
To choose the setting  
OPERATE  
EXIT  
SELECT  
Press the MENU when finished  
Notes:  
• Smart Sound may become an unnatural effect, depending on the signal source.  
You can adjust BALANCE only when A.H.S.+ is off.  
Sub Channel  
The main channel sometimes has minor channels (Sub Channels). By using the SUB CH  
button, you can select a sub channel easily.  
At first, select TV or STB mode to use the Sub channel function. See page 60.  
To watch sub channels  
For example, to move to sub channel 123-45:  
Press 1, 2 and 3 in order  
Press the SUB CH button  
Press 4 and 5 in order  
Press the TUNE button  
Note:  
• If there are more than 2 major channels, select the digital channel by using the πbuttons  
and then press the OK button.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Video Status  
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
VIDEO STATUS  
Standard - Resets the picture display to the factory settings.  
Dynamic - Gives a vivid picture with better contrast when  
viewing in a brightly lit room.  
Theater - Gives a rich, film-like look to video when viewing in  
a dimly lit room.  
STANDARD  
DYNAMIC  
THEATER  
GAME  
Game - Used for when you are playing video games connected to your TV.  
Press the VIDEO STATUS button  
By every press of the VIDEO STATUS button, you change the mode.  
Note:  
You can also change the mode by pressing the πbuttons.  
• Each mode is memorized for each input connected to the TV.  
You can also access the FRONT PANEL CONTROL screen by using the MENU button on  
the front of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO  
STATUS by pressing MENU  
+/- buttons.  
on the front panel and choose a mode by using the CHANNEL  
• There are four video status settings: Dynamic, Standard, Theater and Game. Each video  
status setting has a separate memory for HD (1080i/1080p/720p) and SD (480p/480i) video  
signal. Each video status can be chosen along with your favorite picture settings (Tint,  
Color, Picture, Bright, Detail, etc.)  
– When an HD signal is displayed: Your HD settings are recalled for the video status you  
are using.  
– When an SD signal is displayed: Your SD settings are recalled for the video status you  
are using.  
– The input you are using (Input-1, Input-2, etc.) does not affect the setting that is recalled,  
just the signal type.  
– This function considers PC input as an HD signal and TWIN screens as an SD signal.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
At first, select TV, STB or VCR mode to use the closed caption function. See page 60.  
Press the C.C. button  
CLOSED CAPTION  
OFF  
Notes:  
SMART CAPTION  
• SMART CAPTION will appear when you press the MUTING  
ON  
button, only on channels where the broadcast contains  
closed captioning.  
• When you select ON, it will be the mode selected in the Closed Caption Menu.  
• See page 40 when you set the caption/text mode.  
You can also change the mode by pressing the πbuttons.  
• If you are in PC mode, C.C. can not be used  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work for a total  
time of up to 180 minutes.  
At first, select TV mode to use the sleep timer function.  
Press the SLEEP button  
0 15 30 45 60 90 120 180  
Sleep Timer Message  
60 seconds before the automatic shutoff, this message will appear:  
GOOD NIGHT !  
PUSH SLEEP TIMER BUTTON  
TO EXTEND  
You then have 60 seconds to press the SLEEP button to  
delay the shut off for another 15 minutes.  
ML/MTS  
MTS technology allows several audio signals to be broadcast in analog at once, giving you a  
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP).  
At first, select TV mode to use the multi-language/MTS function.  
Press the ML/MTS button  
MTS  
STEREO  
SAP  
ON AIR  
ON AIR  
By every press of the ML/MTS button, you change  
the mode  
MONO  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
• MTS unavailable if your television’s Input source is in VIDEO-1, 2, 3, 4 or 5 mode, as  
described on page 60.  
• ML/MTS will not work when you are using the HDMI.  
You can also change the mode by pressing the πbuttons.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Twin  
Activate the split-screen option by pressing TWIN on  
the remote control. The channel (or input) you were  
watching before pressing TWIN will appear on the left,  
the new channel will appear on the right. The sound  
will continue to come from the main screen channel  
(or input). To turn split-screen off and return to  
normal television viewing, press TWIN again or press  
the BACK button.  
07  
V-1  
MAIN SCREEN  
PICTURE  
SPLIT SCREEN  
PICTURE  
At first, select TV mode to use the TWIN function.  
Notes:  
• Main Screen and Split Screen will not display the same channel or input at the same time.  
You can enter the TWIN mode when the screen is in NORMAL mode.  
• Split screen will not display digital channels.  
• Split-screen functions will not work with locked channels or channels blocked by V-Chip  
ratings limits. A gray screen will display instead.  
• With split screen, the picture from the component terminal and HDMI terminal will not be  
displayed.  
• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of  
480p, 720p and 1080i from the component terminal and HDMI terminal.  
• After you press the SELECT button, and select SPLIT SCREEN when you press the  
OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will  
be automatically selected about 8 seconds later.  
• Aspect does not work in Twin mode.  
• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.  
• When you are in PC mode or 1080p mode, TWIN, SWAP, SELECT and FREEZE can not  
be used.  
Swap  
You can exchange the channel (or input) displayed in the split screen window for the main  
screen image by pressing the SWAP button.  
At first, select TV mode to use the SWAP function.  
Notes:  
• It will only work in TWIN mode.  
• If the signal that you are watching is coming from the HDMI input, you can not enter the  
SWAP mode.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Select  
With SELECT, you can select the picture (channel) while viewing TWIN screen. When you  
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT  
will shift the channel.  
At first, select TV mode to use the Select function.  
Freeze  
Pressing the FREEZE button causes the screen to change to the split-screen display with the still  
picture displayed on the right. In order to return to the normal display, press the FREEZE button  
once again.  
At first, select TV mode to use the Freeze function.  
Display  
The display screen shows the current status of timers, inputs and XDS ID.  
At first, select TV or STB mode to use the display function. See page 60.  
Press the DISPLAY button  
The screen to the right shows the following  
information:  
05 KLVX PBS  
JAZZ FESTIVAL  
• The current channel or AV input (Channel 05)  
NOW  
12:20 PM  
OFF  
• The current time (12:20 pm)  
• Sleep timer status/minutes remaining (The Sleep  
Timer is off)  
SLEEP TIMER  
ON/OFF TIMER  
ON TIME  
EVERYDAY  
7:00 PM  
• On/off timer status (Set to turn on everyday at  
7:00 PM, off at 10:00 PM)  
OFF TIME  
10:00 PM  
• Each Press of the DISPLAY button changes the  
display mode:  
Display  
Time  
Channel  
Off  
Display - Full screen shown above  
Time - Shows the current time only  
Channel - Shows the current channel  
Off - Turns display off  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock, sleep timer or on/off timer are not set, the display screen will show:  
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.  
External device control buttons  
You can use this remote control to operate the basic functions of your external devices. See  
page 70 on how to program the remote control to operate your other devices.  
Note:  
• The remote is preset to control JVC-brand devices.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Remote programming  
You can program your remote control to operate your external devices, using the instructions  
and codes on pages 70 - 75. The following external devices can be operated using your  
remote control.  
Device  
Mode  
Applied for these functions  
Page  
Cable Set Top Box  
STB  
Power on/off, Channel up/down, Volume up/down, Number 0 - 9, Tune, Return+/ TV,  
Muting, Favorite Channel, Menu on/off, Arrow buttons, OK/Enter, Back, DVR (JVC Only)*,  
Guide (EPG), Sub Channel, Closed Caption, Display (Recall),  
71  
Cable/PVR Combination  
Satellite Set Top Box  
DBS/PVR Combination  
Rewind ( ), Playback ( ), Forward ( ), Record ( ), Stop ( ), Pause ( ).  
VCR, DBS/PVR Combination  
PVR, DVD/PVR Combination  
VCR  
DVD  
Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Back, Guide (EPG), 72, 73  
TV/VCR, Closed Caption, Eject ( ), Rewind ( ), Playback ( ), Forward ( ), Record ( ),  
Stop ( ), Pause ( ).  
DVD Player, DVD Recorder  
Home Theaer in Box  
Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Back, Guide (EPG),  
TV/DVD (TV/VCR button), Sub Title (Sub T.), Open/Close ( ), Rewind ( ), Playback ( ),  
Forward ( ), Record ( ), Stop ( ), Still ( ).  
74  
Amplifier, Home Theater in Box, AUDIO  
Receiver  
Power on/off, Audio Input Selection (V1 button), Volume up/down, Muting,  
DVD operation buttons: Menu on/off, Arrow buttons, OK/Enter, Back, Sub Title (Sub T.),  
Open/Close ( ), Rewind ( ), Playback ( ), Forward ( ), Stop ( ), Still ( ).  
75  
* DVR button only applies to JVC DVR (Dish Satellite STB).  
Notes:  
To record to your VCR or DVD, hold the record ( l ) button on the remote control and press play  
( ® ).  
• If the code you programmed doesn't work, try the next one. If no codes work, refer to "Search  
Code Function" on page 70. If your remote does not work after using the "Search Code Function",  
use the remote that came with your device. Your TV remote can not be guaranteed to work with all  
models, brands or operations.  
• When the television remote control does not operate, for a model that allows you to switch the  
remote control code on the device side, you can try switching the setting to default or something  
else on the device side  
How to set the codes  
1) Find your device and device's brand from the code list. See page 70 - 75.  
2) Select the mode of your device by pressing the MODE button. Then confirm the mode LED on the  
remote control.  
3) Press and hold the TUNE button, then enter the first four digit code number listed using the  
number buttons. When the code is set, the mode LED goes out for a second, then it lights.  
4) After confirming the proper mode LED, release the TUNE button, and confirm the operation of your  
device.  
5) If your device does not respond, try and enter the next code.  
Search Code Function  
1) Select a mode of your device by pressing the MODE button.  
2) Press the POWER and RETURN+/TV buttons. Hold for at least 3 seconds and release. Then  
confirm the mode LED blinks.  
3) Press any button* on the remote, and see if the selected device responds. *Use the applied  
buttons except for ® cursors, Return+/TV and Rec ( l ) on the above chart.  
4) If there was a response, press RETURN+/TV. The codes are now set. Then confirm the mode  
LED goes out.  
5) If there was no response, try to select the previous code or the next code by using or ® . If you  
repeat a total of 65 times for the STB (90 times for the VCR, 120 times for the DVD and 132 times  
for the AUDIO) without a response, use the remote control that came with your equipment. Press  
RETURN+/TV to exit. Then confirm the mode LED goes out.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Programming Codes  
STB mode  
Cable Set Top Box  
Satellite Set Top Box  
Satellite Set Top Box  
ABC  
0003, 0008  
0899  
0899  
1187  
0476  
0476, 0810, 0276,  
0003  
0144  
0009, 0273  
0476, 0810, 0276,  
0003  
AlphaStar  
Chaparral  
Coolsat  
Crossdigital  
DirecTV  
0772  
0216  
1806  
1109  
Samsung  
1377, 1276, 1108,  
1109, 1442, 1609  
0856  
0639, 1639, 1640  
0869  
1142, 1442  
0749, 1749, 0790,  
1285  
1392, 1640  
1806  
0724, 0722  
1535  
1535  
0869  
Americast  
Bell South  
Digeo  
Director  
General Instrument  
SKY  
Sony  
1377, 0392, 0566, Star Choice  
0639, 1639, 1142, Tivo  
0247, 0749, 1749, Toshiba  
0724, 0819, 1856,  
1076, 1108, 0099, UltimateTV  
1109, 1414, 1442, Ultrasat  
1609, 1392, 1640  
1505, 1005, 0775, US Digital  
1170, 1775 USDTV  
1505, 1005, 0775, Voom  
GoldStar  
Hamlin  
Jerrold  
Uniden  
Memorex  
Motorola  
0000  
Dish Network System  
Dishpro  
1376, 0476, 0810,  
0276, 1187  
1877, 0237, 0008  
0000, 0008, 0107  
0000  
1305, 0317, 0025  
1877, 0877, 0144, GE  
0533  
0000  
0000  
0279, 0273  
0000  
0000, 0144  
1877, 0877, 0477,  
0008  
1006  
0003  
0276  
0003  
Pace  
1775  
Zenith  
0856, 1856  
Panasonic  
Paragon  
Philips  
Echostar  
1505, 1005, 0775,  
1170, 1775  
0775, 1775  
0566  
0869  
0775, 1775  
1535  
DBS/PVR Combination  
Expressvu  
Pioneer  
DirecTV  
1377, 0392, 0639,  
1142, 1076, 0099,  
1392, 1442, 1640  
1505, 0775  
1505, 0775  
1505, 0775, 1170  
0775  
General Instrument  
GOI  
Hisense  
Hitachi  
HTS  
Pulsar  
Quasar  
Regal  
Runco  
Samsung  
Scientific Atlanta  
Dish Network System  
Dishpro  
Echostar  
0819  
0775, 1775  
Hughes Network Systems 1142, 0749, 1749, Expressvu  
1442  
1790  
1535  
0775, 1170, 1775  
1414  
0724, 0722  
0724  
0749  
0869  
0869  
0247, 0701  
1807  
0724  
1142, 0749, 1749,  
0724, 1076, 0722,  
0099, 1442  
0392, 0566  
1535  
Hughes Network Systems 1142, 1442  
JVC  
Motorola  
Philips  
Proscan  
RCA  
Samsung  
Sony  
Star Choice  
Humax  
iLo  
JVC  
1170  
0869  
1142, 0099, 1442  
0392  
1392  
1442  
0639, 1640  
0869  
Sony  
Starcom  
Supercable  
Torx  
Toshiba  
Zenith  
LG  
Magnavox  
Memorex  
Mitsubishi  
Motorola  
Next Level  
Panasonic  
Pansat  
Paysat  
Philips  
0000  
0000, 0525, 0899  
Cable/PVR Combination  
Americast  
Digeo  
General Instrument  
Jerrold  
Motorola  
Pace  
Pioneer  
Scientific Atlanta  
Sony  
Supercable  
Zenith  
0899  
1187  
0810  
0810  
1376, 0810, 1187  
1877, 0237  
1877, 0877  
1877, 0877  
1006  
Proscan  
Proton  
RadioShack  
RCA  
0869  
0566, 0855, 0143,  
1392  
0276  
0899  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
VCR mode  
VCR  
VCR  
VCR  
ABS  
1972  
0048, 0209  
0000  
Fisher  
Fuji  
Funai  
Garrard  
0047, 0104, 0046  
0035, 0033  
0000, 0593, 1593  
0000  
Marta  
Matsushita  
0037  
0035, 0162, 0227,  
1162  
1972  
0035  
Admiral  
Adventura  
Aiko  
0278  
Media Center PC  
MEI  
Aiwa  
0037, 0000, 0307, Gateway  
1972  
0479  
0041, 0061, 0106  
1972  
0278  
0035  
0240  
0037, 0278  
0240  
GE  
0060, 0035, 0240, Memorex  
0202, 0760, 0761,  
0807, 1035, 1060  
0432, 0526  
0037, 0209, 0038,  
0225, 1237  
0035, 0162, 0037,  
0048, 0039, 0047,  
0240, 0000, 0104,  
0209, 0046, 0307,  
0479, 1037, 1048,  
1162, 1237, 1262  
0240, 0043, 0061  
0240  
Akai  
Alienware  
America Action  
American High  
Asha  
Go Video  
GoldStar  
Audiovox  
Gradiente  
Harley Davidson  
Harman/Kardon  
0000  
MGA  
Beaumark  
Bell & Howell  
Broksonic  
0000  
0081, 0038  
0072  
MGN Technology  
Microsoft  
Mind  
0104  
1972  
1972  
0184, 0121, 0209, Harwood  
0002, 0479, 1479  
0037  
0035  
0020  
0081  
0072, 0278  
0037, 0278, 1278  
0072  
0037, 0047, 0240, Hughes Network Systems 0042, 0739  
0072, 0271  
Headquarter  
Hewlett Packard  
HI-Q  
0046  
1972  
0047  
0037, 0240, 0000,  
Minolta  
Mitsubishi  
0042, 0105  
Calix  
0081, 0067, 0043,  
0041, 0061, 0173,  
0807  
0035, 0048  
0240, 0000  
Canon  
Capehart  
Carver  
CCE  
Citizen  
Colt  
Hitachi  
0042, 0041, 0105, Motorola  
1037  
1972  
1972  
MTC  
Multitech  
NEC  
Howard Computers  
HP  
0000, 0072  
0035, 0037, 0048,  
0104, 0067, 0041,  
0038, 0008  
0037  
1972  
0240  
1972  
0035  
1062, 0162, 0037,  
0048, 0104, 0432,  
0593, 1048, 1162,  
1262  
0184, 0121, 0209,  
0002, 0208, 0479,  
1479  
1062, 0035, 0162,  
0225, 0227, 0616,  
1035, 1162, 1262  
0035, 0037, 0240,  
0042, 0038, 1035,  
1237  
Craig  
Humax  
0739  
1972  
1972  
0041  
Curtis Mathes  
0060, 0035, 0162, Hush  
0041, 0760, 1035  
0240  
Nikko  
Niveus Media  
Noblex  
iBUYPOWER  
Jensen  
JVC  
Cybernex  
CyberPower  
Daewoo  
1972  
0045, 0067, 0041, Northgate  
0008, 0366, 1707, Olympus  
1945, 1774, 1775, Optimus  
1776, 1777  
0037, 0278  
0067, 0041, 0038  
0045, 0104, 0278,  
0020, 0046, 0561,  
1278  
0020  
1972  
0042  
0739  
0039, 0038  
0000  
0037  
Daytron  
Dell  
Denon  
DirecTV  
Durabrand  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
KEC  
Kenwood  
KLH  
Kodak  
LG  
0072  
Orion  
0035, 0037  
0037, 0045, 0042,  
0209, 0038, 1037  
1972  
0000, 0208  
0240, 0072  
0037  
Panasonic  
Penney  
Linksys  
Lloyd's  
Logik  
0037  
0032  
Emerson  
0035, 0037, 0184, LXI  
0240, 0045, 0000, Magnasonic  
0121, 0043, 0209, Magnavox  
0002, 0278, 1593,  
1479, 1278, 0593,  
0561, 0479, 0208, Magnin  
0593, 1278  
0035, 0039, 0081, Pentax  
0000, 0149, 0563, Philco  
0593, 1593, 1781  
0240  
0042, 0105  
0035, 0000, 0038  
0061  
Marantz  
0035, 0081  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
VCR mode  
PVR  
VCR  
VCR  
Philips  
0035, 0081, 0000, Symphonic  
0563, 0593, 0618, Systemax  
0739, 1081, 1181, Tagar Systems  
0000, 0593, 1593  
1972  
1972  
Howard Computers  
HP  
Hughes Network Systems 0739  
1972  
1972  
1266  
0037  
Tatung  
0081, 0045, 0000, Humax  
0067, 0041, 0008, Hush  
0739  
1972  
Pilot  
Pioneer  
Polk Audio  
Portland  
Presidian  
Profitronic  
Proscan  
0081, 0042, 0067  
0081  
0020  
1593  
0240  
0060, 0202, 0760, Tivo  
0761, 1060  
0072  
0039  
0046  
0046  
0035, 0162, 1035,  
1162  
0000, 1037  
0037  
0037  
0366  
iBUYPOWER  
JVC  
Linksys  
Media Center PC  
Microsoft  
1972  
1945  
1972  
1972  
1972  
1972  
1972  
1972  
0616, 1777  
0618, 0739  
0880  
0614, 0616  
0739  
0614, 0616  
0636, 1972  
1972  
1972  
1972  
0618, 0636, 0739  
1008, 1972, 1996  
1972  
Teac  
0000, 0041  
0035, 0162  
0035, 0037, 0000  
0000  
0618, 0636, 0739, Mind  
1996  
Technics  
Teknika  
Thomas  
Niveus Media  
Northgate  
Protec  
Pulsar  
Quarter  
Quartz  
Quasar  
TMK  
Toshiba  
0240, 0208  
0081, 0045, 0042, Panasonic  
0067, 0043, 0041, Philips  
0008, 0057, 0366, RCA  
0845, 1008, 1145, ReplayTV  
1972, 1996  
0037, 0240  
1972  
0240  
0045  
0038  
0045, 0061  
0037  
Samsung  
Sonic Blue  
Sony  
RadioShack  
Radix  
Randex  
RCA  
Totevision  
Touch  
Unitech  
Stack 9  
0060, 0035, 0240, Vector  
Systemax  
Tagar Systems  
Tivo  
Toshiba  
Touch  
0000, 0042, 0149, Vector Research  
0105, 0106, 0202, Video Concepts  
0760, 0761, 0807, Videomagic  
0880, 1035, 1060  
Videosonic  
0240  
Realistic  
0035, 0037, 0048, Viewsonic  
0047, 0000, 0104, Villain  
1972  
0000  
Viewsonic  
Voodoo  
1972  
1972  
0046  
0614, 0616  
1972  
Voodoo  
Wards  
1972  
ZT Group  
1972  
ReplayTV  
Ricavision  
Runco  
0060, 0035, 0048,  
0047, 0081, 0240,  
0000, 0042, 0072,  
0149, 0760  
0209, 0072  
0035, 0000, 0072  
0041, 0038  
0039, 0033, 0000,  
0209, 0034, 0479,  
1139, 1479  
1972  
DVD/PVR Combination  
0000  
0039  
Samsung  
0240, 0045, 0432,  
0739, 0760, 1014  
0048, 0039  
0000, 0067, 0209, Yamaha  
0041, 0271, 0479, Zenith  
1479  
Emerson  
White Westinghouse  
XR-1000  
Sanky  
Sansui  
Sanyo  
Scott  
0047, 0240, 0104,  
0046  
ZT Group  
0184, 0045, 0121,  
0043  
DBS/PVR Combination  
1945  
Sears  
0035, 0037, 0047,  
0000, 0042, 0104, Echostar  
0046, 0057, 0105, Hughes Network Systems 0739  
1237  
JVC  
1945  
0739  
0739  
Sharp  
0048, 0209, 0807, Philips  
0848, 1048  
0104, 0072  
0240  
0045, 0072  
0614, 0616  
0035, 0032, 0033, Alienware  
0000, 0034, 0636, CyberPower  
0639, 0640, 1032, Dell  
1232, 1972  
1972  
Samsung  
Shintom  
Shogun  
Singer  
Sonic Blue  
Sony  
PVR  
ABS  
1972  
1972  
1972  
1972  
0739  
1945  
1945  
1972  
1972  
DirecTV  
Dish Network System  
Echostar  
Stack 9  
STS  
Sylvania  
0042  
0035, 0081, 0000, Gateway  
0043, 0593, 1593, Hewlett Packard  
1781  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
DVD mode  
DVD Recorder  
1416  
DVD  
DVD  
Accurian  
Advent  
Aiwa  
Akai  
Alco  
1416  
1016  
0641  
0695, 0770, 0899  
0790  
Magnavox  
0503, 0539, 0646, Accurian  
0675, 0821, 1268  
0539  
Apex Digital  
1056  
1168  
1129  
0490  
0675, 1334  
1158  
0741, 1158, 1304,  
1730  
Marantz  
Memorex  
Microsoft  
Mintek  
Aspire Digital  
CyberHome  
Denon  
Funai  
Gateway  
Go Video  
0695, 0831, 1270  
0522, 1708  
0839, 0717  
1521, 0521  
0741  
Allegro  
Apex Digital  
0869  
0672, 0717, 0755, Mitsubishi  
0830, 1056, 1061  
1023  
NAD  
NEC  
Arrgo  
0785  
Aspire Digital  
Audiovox  
Blaupunkt  
Blue Parade  
Broksonic  
Cinea  
Cine Vision  
Citizen  
Coby  
1168  
0790  
0717  
0571  
0695  
0831  
0876, 0833, 0869  
1277  
0778, 1107  
0831  
Nesa  
0717  
1402  
iLo  
JVC  
LG  
LiteOn  
Magnavox  
1348  
1164  
0741  
NexxTech  
Norcent  
Onkyo  
Oritron  
Panasonic  
1003, 1107  
0503, 0627  
0651  
0490, 0703, 1362, Panasonic  
1462, 1490, 1762 Philips  
0503, 0539, 0646, Pioneer  
0675, 0854, 1158, RCA  
1260, 1267, 1354  
0525, 0571, 0631  
1061  
0539  
0770  
0675  
1158, 1416, 1440  
0646, 0675  
0490  
0646, 1158  
0631  
0522  
0490, 1470  
1158  
Philips  
Craig  
Curtis Mathes  
CyberHome  
Samsung  
Sensory Science  
Sharp  
Sony  
Sylvania  
Zenith  
1087  
Pioneer  
0816, 0874, 1023, Polaroid  
1024, 1117, 1129 Polk Audio  
0784, 0705, 0770, Portland  
0833, 0869, 1169, Presidian  
0630, 0675  
1033, 1431  
0675  
Daewoo  
0741  
1172  
Prima  
1016  
Denon  
Disney  
Durabrand  
DVD2000  
Emerson  
0490, 0634  
0675, 1270  
1127  
0521  
0591, 0675, 0821,  
1268  
Proscan  
Pro Vision  
Qwestar  
RCA  
0522  
0778  
0651  
Home Theater in Box  
Aiwa  
0641  
0790  
1770, 1771, 1772,  
1773  
0522, 0571, 0717, Audiovox  
0790, 0822, 1022, JVC  
1132  
Enterprise  
ESA  
Fisher  
Funai  
Gateway  
GE  
Go Video  
0591  
0821, 1268  
0670  
0675, 1268, 1334  
1158  
0522, 0815, 0717  
0744, 0715, 0741, Sansui  
0783, 0833, 0869, Sanyo  
1044, 1075, 1099, Sensory Science  
Rio  
Rotel  
Sampo  
Samsung  
0869  
0623  
0752  
KLH  
Koss  
Oritron  
0790  
0651  
0651  
0539  
0790  
0869  
0869  
0790  
0490, 0573, 0744, Polk Audio  
0820, 0899, 1044, RCA  
1075, 1470  
0695  
0670, 0695, 0873  
1158  
Rio  
Sonic Blue  
Teac  
Venturer  
0790  
1158, 1304, 1730  
0741  
0717  
0582, 0702  
0573, 0664, 1247  
0672  
1500, 1588  
1348  
0717  
1268  
0627  
0702  
Sharp  
0630, 0675, 0752,  
1256  
1117  
GoldStar  
Greenhill  
Harman/Kardon  
Hitachi  
Hiteker  
Humax  
iLo  
Sharper Image  
Sherwood  
Shinsonic  
Sonic Blue  
Sony  
0770  
0533, 0839  
0869, 1099  
0533, 1533, 0864,  
1033, 1431, 1536  
0821  
0675, 0821, 1268  
0675, 0821  
0717, 0790  
0490, 0703  
0571  
Initial  
Superscan  
Sylvania  
Symphonic  
Teac  
Insignia  
Integra  
JBL  
Jensen  
JVC  
1016  
Technics  
0558, 0623, 0867, Theta Digital  
1164, 1602, 1770, Tivo  
1503  
1771, 1772, 1773  
0790  
0490, 0534  
0717, 0790, 1149  
0651  
Toshiba  
0503, 0695, 1045,  
1154, 1503, 1515,  
1588  
0503  
0839  
Kawasaki  
Kenwood  
KLH  
Urban Concepts  
US Logic  
Venturer  
Xbox  
Yamaha  
Koss  
Lasonic  
Lenoxx  
LG  
0798  
1127  
0790  
0522, 1708  
0490, 0539, 0545  
0503, 0591, 0741,  
0869  
0591, 0741, 0869  
1058, 1158, 1416, Zenith  
1440  
LiteOn  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Audio mode  
Amplifier  
Receiver  
Home Theater in Box  
Amstrad  
Bose  
Curtis Mathes  
Durabrand  
GE  
Harman/Kardon  
JVC  
Left Coast  
Lenoxx  
Linn  
Marantz  
NEC  
Optimus  
Philips  
Pioneer  
Polk Audio  
RCA  
0078  
0674  
0300  
1561  
0078  
0892  
0331  
0892  
Koss  
1366, 1497  
1798  
1437  
1293, 1869  
1497  
1189, 1269, 0531, Audiovox  
1514 Bose  
1189, 1269, 0891, Cambridge Soundworks  
1289  
1393  
1751  
1389, 1751  
1389  
0135, 0842, 1298, Durabrand  
1320, 1531  
1023, 0531, 1074  
1366, 1497  
1308, 1518, 0367, Insignia  
1288, 1316, 1548, Integra  
1633, 1763, 1764  
1189, 1269, 0891, JVC  
1266, 1289, 1673  
1023, 0014, 0150, KLH  
0531, 0630, 1123, Koss  
1384, 1823  
1508  
Aiwa  
1388, 1641  
1563, 1615  
1563, 1615  
1609  
1257, 1430  
1390  
1229, 1933  
1370  
1352  
1389  
1420  
1250  
2832  
1561  
1517  
1532  
1426  
1751  
1298  
1306  
1374, 1495, 1676,  
1871  
Lasonic  
Lenoxx  
LG  
Liquid Video  
Magnavox  
Amphion Media Works  
AMW  
Anam  
Apex Digital  
Marantz  
1561  
Classic  
Coby  
Criterion  
Daewoo  
Denon  
0269, 0282, 0829  
0892, 0269  
0264  
0300, 0823  
0892, 0269  
0013, 0300, 0823  
0892, 0269  
0300, 0823  
0264  
0689, 0815, 1126  
0078  
0331  
0078, 0013  
0354, 0133  
Mitsubishi  
NexxTech  
Norcent  
Nova  
Onkyo  
Gateway  
Go Video  
Initial  
Optimus  
Oritron  
Panasonic  
Shure  
Sony  
Soundesign  
Victor  
Wards  
JBL  
Philips  
Yamaha  
Pioneer  
1390, 1412  
1366, 1497  
1798  
1561  
1293, 1869  
1497  
Lasonic  
Lenoxx  
LG  
Receiver  
Polaroid  
Polk Audio  
ADC  
Aiwa  
0531  
1289, 1414  
1254  
1405, 0121, 1243, Proscan  
Liquid Video  
1388, 1641  
1512  
1390  
1563, 1615  
1563, 1615  
1609, 1074  
1257, 1430  
1189  
RCA  
1023, 1609, 1254, Magnavox  
0531, 1074, 1123, NexxTech  
1514  
1751  
1389, 1751  
1389  
1298, 1531  
1366, 1497  
1288, 1316, 1548,  
1633, 1763, 1764  
1266, 1673  
1384  
1508  
1289  
1609, 1390, 1511  
1437  
1869  
1519  
1295, 1500  
1469  
1556  
1517  
Akai  
Alco  
1390, 1511  
1437  
Norcent  
Nova  
Amphion Media Works  
AMW  
Anam  
Apex Digital  
Audiotronic  
Audiovox  
Regent  
Rio  
Saba  
Samsung  
Sansui  
Sanyo  
1869  
Onkyo  
0531, 1519  
1295, 1500  
1764  
Oritron  
Panasonic  
1390  
1251, 1469  
0771, 1286  
1556  
1517, 1653  
1426  
Philips  
Pioneer  
Polaroid  
Polk Audio  
RCA  
Bose  
1229, 0639, 1841, Sharp  
1933  
1602  
1370  
0531  
1189  
1352  
1389  
1420  
1250  
1414  
Sharper Image  
Brix  
Sherwood  
Shinsonic  
Sirius  
Sonic Blue  
Sony  
Cambridge Soundworks  
Capetronic  
Carver  
Classic  
Coby  
Criterion  
Daewoo  
Delphi  
1602  
1532, 1869  
Regent  
Rio  
1058, 1441, 1258, Saba  
1759, 1622, 0474, Samsung  
1406, 1558, 1658, Sanyo  
1758, 1858, 1958  
1023  
1313  
Sharper Image  
Sherwood  
Shinsonic  
Stereophonics  
Denon  
1360, 0771, 1142, Sunfire  
1426  
1660, 2832  
0463  
1517  
Teac  
0463, 1074, 1390, Sonic Blue  
1532, 1869  
0689, 1622, 1558,  
1658, 1758, 1858,  
1958  
Garrard  
Gateway  
Go Video  
1528  
Sony  
Technics  
Thorens  
1308, 1518, 1384  
1189  
1532  
Harman/Kardon  
0110, 0891, 1304, Toshiba  
1788  
1390  
0014  
1406, 1414  
0176, 1176, 1276, Zenith  
1331, 1375, 1476  
0857, 1293  
Teac  
1390, 1528  
1788  
1390  
1331, 1375  
1293  
1306  
1426  
1751  
Venturer  
Wards  
XM  
Toshiba  
Venturer  
Yamaha  
Initial  
Insignia  
Integra  
JBL  
0135, 1298, 1320  
0110, 1306  
Yamaha  
JVC  
0531, 1374, 1495, Zenith  
1560, 1676, 1871,  
1894  
Kenwood  
KLH  
1313, 1570, 1569  
1390, 1412  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Information  
Weak Signal  
This OSD warning appears when the digital channel that you have selected is too weak to  
receive or no signal is being detected for that channel.  
Weak Signal  
15  
No Program  
If the external input terminal you selected, or were watching is not receiving a signal, "NO  
PROGRAM" appears on the television screen. It appears when that external input terminal  
is not receiving a signal and you have the Noise Muting function OFF and you have a single  
screen. It moves automatically every two seconds to prevent the screen from burn-in.  
Note:  
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off  
functions that you set, are still active.  
Invalid Signal  
If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It  
appears when the input is PC and it is a single screen.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lamp Replacement  
Lamp Message  
If this message appears when you turn the TV  
on, you need to replace the lamp. See page 78  
on how to replace the lamp.  
LAMP NEEDS TO BE REPLACED.  
REFER TO OWNER'S MANUAL FOR  
REPLACEMENT INSTRUCTIONS.  
Note:  
AFTER REPLACING THE LAMP,  
PLEASE RESET TIMER IN THE TV  
MENU.  
• This message will appear every time you  
turn on the TV when the lamp needs to be  
replaced. Press the OK button to make the  
message disappear, or replace the lamp.  
PRESS OK, IF YOU DO NOT WANT  
TO SEE THIS MESSAGE AGAIN.  
Lamp Warning  
It is very important that you NEVER TOUCH THE GLASS SURFACE OF THE NEW  
LAMP. Touching the glass surface will deposit oils from your hand onto the lamp  
surface. When the lamp heats up to its operating temperature, the oil will cause a  
difference in temperature on the lamp surface that will likely cause the lamp to break.  
Replace the lamp with part number PK-CL120U only! The television is designed  
to work specifically with this lamp. Using a different lamp, or a third-party  
manufacturer’s lamp could cause a malfunction and or damage to the television.  
This television uses a 120-Watt high-pressure mercury lamp to project images onto the  
television screen. When the lamp nears the end of its operating life, you may notice the picture  
becoming dark. When the picture begins to darken, or the lamp burns out, it is time to replace  
the lamp. The following instructions will tell you how to safely replace the lamp.  
Under operating conditions, THE LAMP WILL GET EXTREMELY HOT AND WILL  
CAUSE SEVERE BURNS IF TOUCHED.  
Before attempting to replace the lamp, make sure the television has completely run  
through its cooling cycle. Turn the power off and wait until the LAMP LED blinks very  
slowly and turns off completely. Unplug the TV. If you feel any warmth as you place  
your hand near the lamp, DO NOT TOUCH IT. Wait until the lamp has completely  
cooled before attempting to replace it. After turning the power off, wait at least 1 hour  
or more.  
NEVER attempt to replace the lamp with the television plugged into a wall outlet.  
Attempting to replace the lamp with the TV plugged in could lead to a severe electrical  
shock.  
Do not keep the TV on for more than 24 hours consecutively. There is the possibility  
of the life of the lamp being shortened.  
The life of the lamp changes depending on the atmospheric temperature and altitude  
in which the TV is being used.  
Please read these instructions fully before attempting to replace the lamp. If you feel  
unsure about replacing the lamp yourself, call a service technician.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lamp Replacement  
Replacement Lamp Kit  
Before replacing the lamp, you will need to purchase a replacement kit, part number  
com.  
The replacement kit will include the following:  
1 High-Pressure Mercury Lamp  
1 Instruction Manual  
Because the lamp contains a small amount of mercury, it cannot be disposed of with  
normal trash.  
How to Replace the Lamp  
Please read these instructions fully before attempting to replace the lamp. If you feel  
unsure about replacing the lamp yourself, call a service technician. Please observe all  
safety warnings.  
DO NOT attempt to remove the assembly until the lamp has fully cooled. If you feel any heat  
near the lamp, STOP and wait until the lamp has FULLY COOLED.  
NEVER attempt to remove the lamp with the television plugged into an outlet.  
DO NOT DROP the used lamp. The inside of the lamp is under pressure. Dropping or other  
hard shock could cause the lamp to shatter.  
ALWAYS recycle the used lamp. Because the lamp contains a small amount of mercury, it  
cannot be thrown away with regular trash. Follow the recycling instructions included with the  
Lamp Replacement Kit.  
1) Turn off the television.  
Press the POWER button on the remote control or TV front panel. Wait until the picture has  
closed and the LAMP LED on the front panel has stopped blinking indicating the lamp cool  
down is complete.  
Warning: The cool-down process cools the lamp from its operating temperature. This  
does not mean that the lamp will now be cool enough to handle safely. We strongly  
recommend you wait at least one hour before proceeding.  
2) Unplug the television.  
Disconnect the power cord from the AC outlet. Make sure that the LAMP LED light has stopped  
blinking before you unplug the set. Never attempt to replace the lamp with the television  
plugged in.  
3) Remove the lamp cover.  
The lamp is located behind the lamp cover below the left side  
of the television. To access the lamp you will need to remove  
the lamp cover. First, remove the screw located on the lamp  
cover using a Phillips head type screwdriver (cross-head type).  
Once the screw has been removed, gently pull it towards you  
and the panel will come away from the television. Set it aside.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lamp Replacement  
4) Remove the lamp unit.  
Using a Phillips head type screwdriver (cross-head type), loosen the two screws fastening the  
lamp unit. When the screws have been loosened, remove the lamp by raising the handle and  
gently sliding the unit towards you. Place it carefully in the recycling packaging.  
5) Install the new lamp unit.  
Holding the handle attached to the new lamp unit, slide and push the new lamp into the  
television and back into the lamp housing area. Do not forget to re-tighten the two screws.  
Note: If the lamp does not sit securely in the TV (in the lamp housing area), it won’t turn on.  
Make sure the lamp sits securely in the housing area.  
WARNING!  
Remember it is very important that YOU DO NOT TOUCH THE LAMP SURFACE. Please  
read the warnings on page 77 again.  
Also, replace the lamp with part number PK-CL120U only! The television is designed  
to work specifically with this lamp. Lamps other than PK-CL120U may cause  
malfunctions and/or other damage to the television.  
NOTICE (for USA)  
This product has a High Intensity Discharge (HID) lamp that  
contains a small amount of mercury. It also contains lead in some  
components. Disposal of these materials may be regulated in your  
community due to environmental considerations. For disposal or  
recycling information, please contact your local authorities, or the  
Electronics Industries Alliance: http://www.eiae.org  
To purchase a replacement lamp kit, please call 1-800-252-5722.  
6) Re-install the lamp cover.  
Insert the lamp cover in the right concave and close the lamp cover. Because the lamp cover  
has a role to help prevent the danger of an electrical shock, tighten the screw using a Phillips  
head type screwdriver (cross-head type).  
Notes:  
• Make sure the lamp door is closed completely, or the power will not turn on.  
• After installing the new lamp unit, do not forget to reset the lamp timer. See page 58.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lamp Replacement  
Warning LED Messages  
While the power is on, and there is a problem with the TV, the TV changes to warning  
mode and informs you of the problem using the LED as follows. Then, the power turns off  
automatically and performs the cooling for approximately 40 seconds.  
The LAMP LED blinks  
Condition: It may be a malfunction of the internal electrical circuits.  
To correct: Keep the TV off for a while and then turn the power on again. If the TV goes into  
warning mode, unplug the TV after the cooling has completed and consult your  
dealer.  
The POWER LED and LAMP LED blink alternately  
Condition: The inside temperature rises abnormally or the fan may be blocked.  
To correct: Keep the TV off for a while and then turn the power on again. If the TV goes into  
warning mode, unplug the TV after the cool down as completed and consult your  
dealer.  
The POWER LED and LAMP LED blink rapidly simultaneously  
Condition: The lamp unit has been installed on a slant, or it is not fully inserted into the lamp  
housing. Or it may be a lamp malfunction.  
To correct: • If this condition occurs soon after replacing the lamp: Reinstall the new lamp unit.  
Repeat the lamp installation steps, taking care to observe all warnings. Make  
sure the lamp sits securely inside the unit when you reinstall it.  
• If this condition occurs except for replacing the lamp: Keep the TV off for a while  
and then turn the power on again. If the TV goes into warning mode, unplug the  
TV after the cool down as completed and consult your dealer.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
CHECK  
PROBLEMS  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
• It is possible the fan is stuck or the inside temperature is rising abnormally.  
Consult your dealer.  
The POWER LED  
and LAMP LED are  
blinking alternately.  
• It may be a malfunction that the fan is locked or the temperature has increased.  
The POWER LED  
and LAMP LED  
are blinking rapidly  
simultaneously.  
• The lamp may not have been installed correctly, or it may be due to a malfunction.  
• The lamp door may not be closed correctly.  
There is no picture  
or sound  
• The antenna could be disconnected.  
• The input mode could be set improperly. See page 60.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 30.  
• The TV station may be having difficulties. Check to see if other stations are working.  
• Use the HDMI cable with HDMI logo  
. See page 20.  
You can not output audio using the AUDIO OUTPUT under the following conditions:  
1) When you have digital sound from an HDMI device connected to the INPUT-1 or  
INPUT-2 connection on the side of your TV. (See page 20).  
2) When you have analog sound from a DVI device connected to the  
AUDIO IN "INPUT-1" connection. (See page 19).  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
You may be too far from the TV. You must be within 23 feet (7 meters).  
• Make sure your remote is set to the proper mode. See page 60.  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 31.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 32.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 57.  
• Check to see if the Sleep Timer was set. See page 67.  
It does not operate  
correctly  
• This television is operated by a microprocessor. It is possible that external noise or  
interference is causing the problem. If the television does not function correctly, remove the  
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet  
again and operating the television.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 56.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 51.  
• The Video Status mode may be turned to the wrong setting. See page 66.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 80% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 66.  
• Make sure the MTS settings are correct. See page 67.  
Stereo or bilingual  
programs can't be  
heard  
The LAMP LED  
continues blinking  
• It may be a malfunction of the internal electrical circuits.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
CHECK  
PROBLEMS  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
The following are not malfunctions.  
• The television may make a creaking sound if the temperature of the room or the temperature  
inside the television changes. If there is no problem with the screen or sound, then there is no  
need to worry.  
• The lamp may make a noise when it blows, but this is not dangerous.  
• The lamp may make a noise when the power is turned on and a picture is displayed on  
the screen. This noise is caused when the mercury inside the lamp is heated, and is not a  
malfunction.  
• The still parts of a picture may remain on the screen. This is a characteristic of HD-ILA  
elements and not a malfunction. The picture will disappear over time.  
• The operation of this television is not guaranteed below 0ºC. If the power is turned on while  
the temperature is below 0ºC, the picture may be disturbed. Use the television when the  
temperature is 0ºC or higher.  
• Although the HD-ILA element is manufactured with high-precision technology, please  
understand that some pixels may be lost or permanently displayed.  
• There is a cooling fan built-in to the television. Please understand that this fan will make some  
noise when the television is on and while cooling.  
• Although the picture may be temporarily disturbed and noise may be seen on the screen if the  
power is turned on immediately after it has been turned off. This is not a malfunction.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
HD-58S998  
Model  
Type  
HD-ILA Device Projection  
NTSC, BTSC System (Multi-Channel Sound)  
ATSC Terrestrial, Digital Cable  
Reception Format  
Reception Range  
VHF 2 to 13, UHF 14 to 69 at ATSC,  
CATV 125 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable  
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper  
and Ultra bands (181 channel frequency synthesizer system) at Analog  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
Power Source  
Power Consumption  
Projection Source  
AC 120V, 60 Hz  
219W  
120W High-Pressure Mercury Lamp  
58 inch / 147 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Speakers  
(1 cm x 9.5 cm) x 2, 10 cm round x 1  
Audio Output  
Full Range - 10W + 10W + 10W  
Antenna Terminal  
(VHF/UHF,  
ATSC/DIGITAL  
CABLE IN)  
75 ohms (VHF/UHF)(F-type connector)  
S (Input 3)  
Input 3, 4, 5  
Terminal  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
Input 3, 4 Terminal  
(component terminal)  
1080i / 720p / 480p / 480i  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p 75 ohms  
Video: 1080p / 1080i / 720p / 480p / 480i / VGA  
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit  
Input 1, 2 Terminal  
(HDMI Input Terminal)  
Personal computer compatibility cannot be guaranteed.  
Audio Output Jacks  
(FIX)  
FIX : 500mVrms (-4dBs) Low impedance (1000 Hz when modulated 100%)  
Digital Out (optical) x 1  
Optical Output  
Digital Audio  
Analog RGB D-SUB (15 pin) x 1  
• PC signal is available. Refer to page 23 for details on the signals which  
can be input.  
Input 5 Terminal  
(PC Input Terminal)  
51 1/2 x 37 7/8 x 13 5/8  
130.5 x 96.1 x 34.6  
With Front and Rear  
Pedestal  
Dimensions (inch)  
W X H X D (cm)  
51 1/2 x 37 7/8 x 10 3/4  
130.5 x 96.1 x 27.2  
Without Front and Rear  
Pedestal  
Weight (lbs / kg)  
118.8 / 54  
With Front and Rear  
Pedestal  
114.7 / 52  
Without Front and Rear  
Pedestal  
Accessories  
Illuminated remote control unit x 1 / AA batteries X 2  
Front Pedestal x 1 / Rear Pedestal x 1  
Philips type screws x 14  
Specifications subject to change without notice.  
• The open source software is embedded in this product. For more information, please go to:  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intelligent Motion Systems Home Safety Product MDI42 AC User Manual
Jackson Dishwasher 24LTP User Manual
JBL Portable Speaker CS600SAT User Manual
Kenmore Range 7907851 User Manual
King Canada Drill KC 116C FC User Manual
KitchenAid Dishwasher KUDD01DPPA User Manual
KitchenAid Gas Grill KBGN274 User Manual
KitchenAid Oven KEBS177SSS03 User Manual
KitchenAid Washer KAWE900T User Manual
Kramer Electronics Projector VP 770 User Manual