CASSETTE RECEIVER
KS-FX12/KS-FX12WT
KS-FX12/KS-FX12WT
KS-FX12/KS-FX12WT
RECEPTOR-REPRODUCTOR DE
CASSETTE
RADIOCASSETTE
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
FSUN3098-631
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
BASIC OPERATIONS....................................................3
RADIO OPERATIONS...................................................4
Listening to the radio ..................................................................... 4
Storing stations in memory ............................................................ 5
FM station automatic preset: SSM ............................................... 5
Manual preset .............................................................................. 6
Tuning into a preset station ........................................................... 7
Other convenient tuner functions ................................................. 8
Scanning broadcast stations ....................................................... 8
Selecting FM reception sound ..................................................... 8
Changing the AM/FM channel intervals ....................................... 8
TAPE OPERATIONS .....................................................9
Listening to a tape .......................................................................... 9
SOUND ADJUSTMENTS .............................................10
Turning on/off the loudness function .......................................... 10
Selecting preset sound modes ...................................................... 10
Adjusting the sound...................................................................... 11
Storing your own sound adjustments ......................................... 12
OTHER MAIN FUNCTIONS.........................................13
Setting the clock ............................................................................ 13
Detaching the control panel ......................................................... 14
CD CHANGER OPERATIONS ......................................15
Playing CDs ................................................................................... 15
Selecting CD playback modes ..................................................... 17
MAINTENANCE ........................................................18
To extend the lifetime of the unit ................................................. 18
How to reset your unit .................................................................. 18
TROUBLESHOOTING .................................................19
SPECIFICATIONS .......................................................20
BEFORE USE
For safety....
Temperature inside the car....
*
*
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
• Stop the car before performing any complicated
operations.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
1
2
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 13.
3
1
/I/ATT
Turn on the power.
Notes on One-Touch Operation:
• When you select tuner as a source in step 2 below, the power automatically
comes on. You do not have to press this button to turn on the power.
• If the cassette is already in the cassette compartment, tape play starts
automatically.
2
3
4
F M
Play the source.
A M
To operate the tuner, see pages 4 – 8.
To operate the tape deck, see page 9.
To operate the CD changer, see pages 15 – 17.
CD-CH
Adjust the volume.
Volume level appears.
Adjust the sound as you want (see pages 10 – 12).
To drop the volume in a moment
Press
briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
for more than 1 second.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATIONS
Listening to the radio
1
3
2
1
/I/ATT
Turn on the power.
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on.You
do not have to press this button to turn on the power.
2
FM1
FM3
FM2
F M
Select the band (FM1, FM2, FM3
or AM).
A M
You can select any one of FM1, FM2, and
FM3 to listen to an FM station.
AM
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure
to eject the cassette from the cassette compartment to listen to the radio.
To search stations
of higher
frequencies.
3
Start searching a station.
When a station is received, searching stops.
To search stations
of lower
frequencies.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Press FM or AM to select the band.
2 Press and hold
Now you can manually change the frequency while “M” is flashing.
3 Press T or S repeatedly until the frequency you want is reached.
T or S
until “M” starts flashing on the display.
• If you hold down the button, the frequency keeps changing until you release the button.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations.
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
2
1
FM1
FM2
FM3
1
2
F M
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
Press and hold the button for more than 2
seconds.
“SSM” appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3).These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
Example: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.
2
3
1
1
2
F M
Select the FM1 band.
Tune into a station of 88.3 MHz.
See page 4 to tune into a station.
3
Press and hold the button for more than 2
seconds.
Preset number “1” flashes for a while.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see page 5 or 6.
2
1
FM1
FM3
FM2
1
2
F M
A M
AM
Select the band (FM1, FM2, FM3 or AM) you
want.
Select the number (1 – 6) for the preset station
you want.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenient tuner functions
SEL
MO/RND
+/–
T
RPT/SCAN
S
Scanning broadcast stations
When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes
on the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND while listening to an FM stereo broadcast. The sound you hear becomes
monaural but reception will be improved.
Lights when receiving an FM broadcast in stereo
\
To restore the stereo effect, press the same button again.
Changing the AM/FM channel intervals
When using this unit in an area other than North or South America:
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM.You can change the channel intervals by following the procedure below.
1 Press SEL (select) for more than 2 seconds.
“CLOCK H,” “CLOCK M” or “AREA” appears on the display.
2 If “AREA” does not appear, press
3 Press +.
T or S
until it appears.
“AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for
manual tuning) / 100 kHz (for searching) for FM.
To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA
US” appears on the display.)
AREA EU: Select this when used in an area other than North and South America.
AREA US: Select this when used in North or South America.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE OPERATIONS
Listening to a tape
3
2
1
1
2
/I/ATT
Turn on the power.
Insert a cassette.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
3
Select the tape direction.
• Press the both buttons at the same time.
Each time you press the button, the tape direction changes
PROG
alternatively – forward (
) and reverse (
).
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette ejects from the cassette compartment.
You can hear the last received station.
• You can also eject the cassette with the unit turnd off.
To fast-wind a tape
Press either ¡ or 1.
The tape will be wound in the direction of the arrows
(¡ or 1).
To restart playback, press ¡ or 1 lightly.
Tape direction
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND ADJUSTMENTS
Turning on/off the loudness function
The human ear is less sensitive to low and high frequencies at low volumes.
The loudness function can boost these frequencies to produce a well-balanced sound at low
volume levels.
Each time you press LOUD, the loudness function turns on/off alternatively.
LOUD
|\
Selecting preset sound modes
You can select a preset sound adjustment suitable to the music genre.
Each time you press SOUND, the sound mode changes as follows.
SOUND
Indication
For:
Preset values
Bass
00
Treble
00
Loudness
SCM OFF
BEAT
(Flat sound)
On
On
Off
Off
Rock or disco music
Light music
+2
00
POP
+4
+1
SOFT
Quiet background music
+1
–3
Notes:
• You can adjust the preset sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 12.
• To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound”
on page 11.
• When one of the sound modes is selected, it is shown on the display as follows:
For example, when “POP” is selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
You can adjust the treble/bass sound and the speaker balance.
2
1
1
Select the item you want to adjust.
Indication
To do:
Range
BAS
Adjust the bass
–6 (min.) — +6 (max.)
(bass)
TRE
Adjust the treble
–6 (min.) — +6 (max.)
(treble)
FAD
(Fader)*
Adjust the front and rear speaker
balance
R6 (rear only) — F6 (front only)
L6 (left only) — R6 (right only)
00 (min.) — 50 (max.)
BAL
Adjust the left and right speaker
(Balance) balance
VOL
Adjust the volume
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to “00”.
2
Adjust the level.
Note:
Normally the + and – buttons work as the volume control buttons.
So you do not have to select “VOL” to adjust the volume level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, POP, SOFT: see page 10) to your preference and
store your own adjustments in memory.
3
2
2
1,4
SOUND
1
2
Call up the sound mode you want to adjust.
See page 10 for details.
Within
5 seconds
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
LOUD
To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
and off alternatively. (= go to step 4)
Within
5 seconds
3
Adjust the bass or treble level.
See page 11 for details.
Within
5 seconds
4
5
Press and hold SOUND until the sound mode
SOUND
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 10.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS
Setting the clock
2,3
1 2,3
4
1
2
Press and hold the button for more than 2
seconds.
“CLOCK H,” “CLOCK M” or “AREA” appears on the display.
1.
1.
Set the hour.
1. Select “CLOCK H” if not shown on the
display.
2.
2.
2. Adjust the hour.
3
Set the minute.
1. Select “CLOCK M.”
2. Adjust the minute.
Start the clock.
4
To check the current clock time (changing the display mode)
Press DISP repeatedly.Each time you press the button, the display mode changes as follows.
During tuner operation:
During tape operation:
During CD operation:
Elapsed
Clock
Clock
Frequency
Clock
Play mode
playing time
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Detaching the control panel
You can detach the control panel when leaving the car.
When detaching or attaching the control panel, be careful not to damage the connectors on
the back of the control panel and on the panel holder.
How to detach the control
panel
How to attach the control
panel
Before detaching the control panel, be sure
to turn off the power.
1
Insert the left side of the
control panel into the groove
on the panel holder.
1
Unlock the control panel.
2
2
Press the right side of the
control panel to fix it to the
panel holder.
Lift and pull the control panel
out of the unit.
3
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Put the detached control
panel into the provided case.
Connectors
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series with your unit.
If you have another CD automatic changer, consult your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-
U15K) for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside
down, “NO CD” or “NO DISC” will appear on the display. If this happens, remove the
magazine and set the discs correctly.
• If “RESET 1 - RESET 8”appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.
Playing CDs
¢
Number buttons
1
4
1
Select the CD automatic changer.
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
CD-CH
Disc number
\
Track number
Elapsed playing time
(The clock time is shown if you have
pressed DISP to see the clock time.
See page 13.)
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To fast forward or reverse the track
Press and hold
¢, while playing a CD, to fast forward the track.
Press and hold 4 , while playing a CD, to reverse the track.
To go to the next track or the previous track
Press
¢ briefly, while playing a CD, to go ahead to the beginning
of the next track. Each time you press the button consecutively, the
beginning of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning
of the current track. Each time you press the button consecutively, the
beginning of the previous tracks is located and played back.
To go to a particular disc directly
7
8
9
10
11
12
Press the number button corresponding to the disc number to start its
playback.
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
Ex. When disc number 3 is selected
Disc number
Track number
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting CD playback modes
MO/RND
RPT/SCAN
To play back tracks at random (Random Play)
Each time you press MO/RND (Mono/Random) while playing a CD, CD
random play mode changes as follows:
MO/RND
RND1
RND2
Canceled
(Random1)
(Random2)
Mode
RND Indicator
Plays at random
RND1
Lights
All tracks of the current disc, then the tracks of the
next disc, and so on.
RND2
Flashes
All tracks of all discs inserted in the magazine.
To play back tracks repeatedly (Repeat Play)
Each time you press RPT/SCAN (Repeat/Scan) while playing a CD, CD
repeat play mode changes as follows:
RPT
SCAN
RPT1 RPT2
Canceled
(Repeat1)
(Repeat2)
Mode
RPT Indicator
Lights
Plays repeatedly
RPT1
RPT2
The current track (or specified track).
Flashes
All tracks of the current disc (or specified disc).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
To extend the lifetime of the unit
This unit requires very little attention, but you will be able to extend the life of the unit if you
follow the instructions below.
To clean the heads
• Clean the heads after every 10 hours of use
using a wet-type head cleaning tape (available
at an audio store).
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
• Always store the tapes to their storage cases
after use.
• Do not store tapes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
CAUTIONS:
• Do not play the tapes with peeling labels; otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape may become entangled with the mechanism.
• Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
How to reset your unit
Press and hold both the SEL (Select) and
same time for several seconds.
(Standby/On/ATT) buttons at the
This will reset the built-in microcomputer.
NOTE: Your preset adjustments — such as preset channels or sound adjustments
— will also be erased.
(Standby/On/ATT)
SEL (Select)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service center.
Symptoms
Causes
Remedies
• A cassette tape cannot be
inserted.
You have tried to insert a
cassette in the wrong way.
Insert the cassette with the
exposed tape facing right.
• Cassette tapes become hot. This is not a malfunction.
• Tape sound is at very low
level and sound quality is
degraded.
The tape head is dirty.
Clean it with a head cleaning
tape.
• Sound is sometimes
interrupted.
Connections are not good.
Check the cords and
connections.
• Sound cannot be heard from The volume control is turned
Adjust it to the optimum level.
the speakers.
to the minimum level.
Connections are incorrect.
Check the cords and
connections.
• Static noise while listening
to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
• “NO CD” or “NO DISC”
appears on the display.
No CD is in the magazine.
CDs are inserted incorrectly.
Insert CDs into the magazine.
Insert them correctly.
• “RESET 8” appears on the
display.
This unit is not connected to a
CD changer correctly.
Connect this unit and the CD
changer correctly and press
the reset button of the CD
changer.
• “RESET 1-RESET 7”
appears on the display.
Press the reset button of the
CD changer.
• The unit does not work at
all.
The built-in microcomputer
may function incorrectly due
to noise, etc.
While holding SEL, press
for more than 2
seconds to reset the unit.
(The clock setting and preset
stations stored in memory are
erased.) (See page 18).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
CASSETTE DECK SECTION
Wow & Flutter: 0.15% (WRMS)
Fast-Wind Time: 190 sec. (C-60)
Frequency Response:
Maximum Power Output:
Front: 40 watts per channel
Rear: 40 watts per channel
Continuous Power Output (RMS):
50 to 14,000 Hz (±3 dB)
Front: 16 watts per channel into 4 Ω, 40 Signal-to-Noise Ratio: 52 dB
to 20,000 Hz at no more than 0.8% Stereo Separation: 40 dB
total harmonic distortion.
Rear: 16 watts per channel into 4 Ω, 40
GENERAL
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
Power Requirement
Operating Voltage: DC 14.4 volts (11 to 16
volts allowance)
Grounding System: Negative ground
Dimensions (W x H x D)
Load Impedance: 4 Ω (4 to 8 Ω allowance)
Tone Control Range
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Installation Size:
Frequency Response: 40 to 20,000 Hz
Signal-to-Noise Ratio: 70 dB
182 x 52 x 150 mm
(7-3/16" x 2-1/16" x 5-15/16")
Panel Size: 188 x 58 x 14 mm
(7-7/16" x 2-5/16" x 5/8")
TUNER SECTION
Frequency Range
Mass: 1.3 kg (2.9 lbs) (excluding accessories)
FM: 87.5 to 107.9 MHz
Design and specifications subject to change
without notice.
(with channel interval set to 200 kHz)
87.5 to 108.0 MHz
(with channel interval set to 50 kHz)
AM: 530 to 1,710 kHz
If a kit is necessary for your car, consult
your telephone directory for the nearest
car audio speciality shop.
(with channel interval set to 10 kHz)
531 to 1,602 kHz
(with channel interval set to 9 kHz)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 to 15,000 Hz
Stereo Separation: 35 dB
Capture Ratio: 2.0 dB
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|