JVC Home Theater System SP PWC3 User Manual

DVD DIGITAL CINEMA SYSTEM  
TH-C3  
Consists of XV-THC3, SP-PWC3, SP-THC3F, SP-THC3C and SP-THC3S  
INSTRUCTIONS  
GVT0150-003A  
[B]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings, Cautions and Others  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are  
shown below:  
Wall or obstructions  
XV-THC3  
Wall or  
XV-THC3  
8 cm  
obstructions  
Front  
3 cm  
3 cm  
10 cm  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
No  
obstructions  
15 cm  
Wall or obstructions  
SP-PWC3  
Wall or  
obstructions  
20 cm  
SP-PWC3  
Front  
No  
15 cm  
15 cm  
15 cm  
obstructions  
SAFETY INSTRUCTIONS  
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”  
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be  
taken if you are to obtain the best results and safety is to be assured.  
Do read the operating instructions before you attempt to use the equipment.  
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are  
properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing  
connections.  
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
Do be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off,  
withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has  
a standby mode.  
Switch off using the switch on the equipment and make sure that your family know how to do this.  
Special arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to  
watch television whilst driving.  
DON’T listen to headphones at high volume as such use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.  
Overheating will cause damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved  
stand or legs with the fixings provided according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL  
— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could result in a fatal  
electrical shock.;  
— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!  
E43486-340B  
G-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Introduction .....................................2  
Notes on handling .................................................................2  
Supplied accessories ............................................................2  
Playback ........................................17  
Basic playback ....................................................................17  
One Touch Replay ...............................................................19  
Fast-forward/fast-reverse search ........................................19  
Skip to the beginning of a desired selection .......................19  
Locating a desired title/group using number buttons .........20  
Playing back a bonus group ................................................20  
Selecting the desired title/playlist from the control display .20  
About discs .....................................3  
Playable disc types ...............................................................3  
Notes on file types ................................................................3  
Description of parts and controls ...4  
Advanced operations ....................21  
Using the surround mode ...................................................21  
Using the on-screen bar .....................................................22  
Playing from a specified position on a disc .........................24  
Using the file control display ..............................................25  
Resume Playback ...............................................................26  
Selecting a view angle .........................................................26  
Selecting the subtitle ..........................................................26  
Selecting the audio .............................................................27  
Special picture playback .....................................................27  
Program Playback ...............................................................29  
Random Playback ...............................................................29  
Repeat Playback .................................................................30  
Tray lock .............................................................................31  
Sound settings ....................................................................31  
Connections ....................................7  
Connecting the FM and AM (MW) antennas .........................7  
Connecting the satellite (front, center, surround) speakers ..... 8  
Speaker layout ......................................................................9  
Connecting a TV ....................................................................9  
Connecting the powered subwoofer ....................................10  
Connecting to an analog component ...................................10  
Connecting to a digital component .....................................10  
Connecting the power cord .................................................10  
Operating external components with  
the remote control ........................11  
Operating the TV .................................................................11  
Operating the VCR ..............................................................12  
Basic operations ...........................13  
Turning the system on/off ...................................................13  
Selecting the source to play ................................................14  
Adjusting the volume [VOLUME] ........................................14  
Listening with headphones (not supplied) ..........................14  
Turning off the sound temporarily [MUTING] .....................14  
Adjusting the brightness of the indications [DIMMER] .......14  
Sleep Timer [SLEEP] ...........................................................15  
Adjusting the output level of the subwoofer and speakers ..15  
Adjusting the treble sound [TREBLE] ..................................15  
Adjusting the bass sound [BASS] .......................................15  
Changing the scan mode ....................................................15  
Optimizing the speaker settings [Smart Surround Setup] ...16  
Setting DVD preferences ..............32  
Using the setup menus .......................................................32  
Menu description ................................................................32  
Tuner operations ...........................35  
Manual tuning .....................................................................35  
Preset tuning ......................................................................35  
Selecting the FM reception mode ........................................36  
Reducing the noise of AM (MW) broadcast ........................36  
Using the RDS (Radio Data System) when receiving FM  
stations ...............................................................................36  
References ....................................39  
Maintenance .......................................................................39  
Troubleshooting ..................................................................39  
Specifications .....................................................................40  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
7 Safety precautions  
Notes on handling  
7 Important cautions  
Avoid moisture, water and dust  
Do not place the system in moist or dusty places.  
Avoid high temperatures  
Do not expose the system to direct sunlight and do not place it near  
a heating device.  
Installation of the system  
• Select a place which is level, dry and neither too hot nor too cold;  
between 5°C and 35°C.  
When you are away  
When away on travel or for other reasons for an extended period of  
time, disconnect the power cord plugs from the wall outlet.  
• Leave sufficient distance between the system and the TV.  
• Do not use the system in a place subject to vibration.  
Power cord  
Do not block the vents  
Blocking the vents may damage the system.  
• Do not handle the power cord with wet hands!  
• A small amount of power is always consumed while the power  
cord is connected to the wall outlet (center unit only).  
• When unplugging the power cord from the wall outlet, always  
pull on the plug, not the power cord.  
Care of the cabinet  
When cleaning the system, use a soft cloth and follow the relevant  
instructions on the use of chemically-coated cloths. Do not use  
benzene, thinner or other organic solvents including disinfectants.  
These may cause deformation or discoloring.  
To prevent malfunctions of the system  
• There are no user-serviceable parts inside. If anything goes  
wrong, unplug the power cord and consult your dealer.  
• Do not insert any metallic object into the system.  
• Do not use any non-standard shape disc (like a heart, flower or  
credit card, etc.) available on the market, because it may damage  
the system.  
If water gets inside the system  
Turn the system off and disconnect the power cord plug from the  
wall outlet, then call the store where you made your purchase.  
Using the system in this condition may cause fire or electrical  
shock.  
• Do not use a disc with tape, stickers, or paste on it, because it  
may damage the system.  
Label sticker  
Supplied accessories  
Check to be sure you have all of the supplied accessories.  
The number in parentheses is the quantity of the pieces supplied.  
If anything is missing, contact your dealer immediately.  
Sticker  
Paste  
• Remote control (1)  
• Batteries (2)  
• FM antenna (1)  
• AM loop antenna (1)  
• Power cord (1)  
• System cord (1)  
• Core filter (1)  
Note about copyright laws  
Check the copyright laws in your country before recording from the  
discs. Recording of copyrighted material may infringe copyright  
laws.  
Note about copyguard system  
The discs are protected by copyguard system. When you connect  
the system to your VCR directly, the copyguard system activates  
and the picture may not be played back correctly.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
About discs  
If a DVD with an improper Region Code number is loaded,  
“REGION CODE ERROR!” appears on the TV screen and  
playback cannot start.  
Playable disc types  
This system has been designed to play back the following discs:  
Notes on DVD-R, DVD-RW and DVD-RAM  
DVD VIDEO  
DVD AUDIO  
• This system can also play finalized DVD-Rs or DVD-RWs  
recorded in DVD VIDEO format and DVD-RWs or DVD-RAMs  
recorded in DVD VR format.  
• This system can also play DVD-Rs or DVD-RWs if MP3, WMA,  
and JPEG files are recorded on them with UDF Bridge format.  
This system does not support “multi-border” discs.  
VCD/SVCD  
Audio CD  
Notes on CD-R and CD-RW  
• This system can also play CD-Rs or CD-RWs if MP3, WMA and  
JPEG files are recorded on them with ISO 9660 format.  
• This system supports “multi-session” discs (up to 20 sessions).  
• This system cannot play “packet write” discs.  
• DVD Logo is a trademark of DVD Format/Logo Licensing  
Corporation.  
Some discs may not be played back because of their disc  
characteristics, recording conditions, or damage or stain on them.  
• The Non-DVD side of a “DualDisc” does not comply with the  
“Compact Disc Digital Audio” standard. Therefore, the use of  
Non-DVD side of a DualDisc on this product may not be  
recommended.  
Unplayable discs:  
SACD, CD-I (CD-I Ready), Photo CD, etc.  
Playing back these discs will generate noise and damage the  
speakers.  
• This system accommodates the PAL system, and also can play  
discs recorded with NTSC system. Note that an NTSC video  
signal on a disc is converted to the PAL60 signal and output.  
• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs, their  
actual operation may be different from what is explained in this  
manual. This is due to the disc programming and disc structure,  
not a malfunction of this system.  
Notes on file types  
For all playable files  
• The system can only recognize and play files with one of the  
following extensions, which can be in any combination of upper  
and lower case;  
• Before playing back discs, read their instructions or cautions  
carefully.  
Region code of DVD VIDEO  
MP3:  
WMA: “.WMA” , “.wma”  
“.MP3”, “.mp3”  
This system can play back DVD VIDEO discs whose Region Code  
numbers include the system’s Region Code, which is indicated on  
the rear panel.  
JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”  
• The system recognizes up to 150 tracks (files) per group, 99  
groups per disc, and the total number of the tracks (files) that the  
system can play is 4000.  
Example of playable DVD:  
• Some files may not be played back normally because of their disc  
characteristics or recording conditions.  
2 3  
4 5  
ALL  
2 5  
2
For MP3/WMA files  
• The system supports MP3/WMA files recorded with a bit rate of  
32 – 320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,  
24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.  
• If the tag information (album name, artist, and track title, etc.) is  
recorded on a disc, it appears in the file control display on the TV  
screen. (A pg. 25)  
• We recommend to record each piece of material (song) at a  
sample rate of 44.1 kHz and at a data transfer rate of  
128 (96*) kbps.  
* For WMA only  
For JPEG files  
• We recommend to record a file at 640 x 480 resolution.  
• This system can only play baseline JPEG files.  
This product incorporates copyright protection technology  
that is protected by U.S. patents and other intellectual  
property rights. Use of this copyright protection technology  
must be authorized by Macrovision, and is intended for  
home and other limited viewing uses only unless otherwise  
authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE  
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE  
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625  
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS  
RECOMMENDED THAT THE USER SWITCH THE  
CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.  
IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE  
CENTER.”  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of parts and controls  
Front panel (center unit)  
Display window  
pg. 22  
pg. 18  
pg. 19  
pg. 22  
pg. 35 pg. 35  
FM AM  
P LPCM SURR  
MHz  
kHz  
CH  
WMAMP3  
RESUME  
PROGRESSIVE B.S.P. CHAP. TRK PG PL BONUS ST MONO RDS TA NEWS INFO PRG RND  
DISC ALL  
pg. 29  
pg. 29  
pg. 30  
pg. 18  
pg. 35  
pg. 35  
pg. 18  
pg. 26  
pg. 28  
pg. 18  
pg. 36  
pg. 17  
pg. 18 pg. 20  
pg. 15  
pg. 19  
pg. 14  
pg. 17  
pg. 17  
/
/
TUNING  
SOURCE  
Disc tray (inside): pg. 17  
pg. 14  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
pg. 13  
pg. 14  
pg. 17  
pg. 13  
Remote sensor:  
pg. 6  
Rear panel (center unit)  
pg. 7  
pg. 10  
pg. 10  
pg. 10  
AUX IN  
AV  
pg. 9  
pg. 10  
pg. 9  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of parts and controls  
Powered subwoofer  
SP-PWC3  
pg. 10  
pg. 8  
CAUTION:  
SPEAKERIMPEDANCE  
4
16  
POWER ON lamp:  
pg. 13  
Power cord:  
Front  
Rear  
pg. 10  
NOTE  
• For safety reasons, always ensure that there is sufficient space behind the powered subwoofer.  
* Do not block the ventilation openings.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of parts and controls  
Remote control  
Putting batteries in the remote control  
pg. 11  
TV/VIDEO  
FAUDIO  
VCR  
pg. 13  
pg. 11  
TV  
DISC 1  
DISC 3  
DVD  
DISC 2  
DISC 4  
FM/AM  
pg. 12  
pg. 14  
pg. 17  
pg. 14  
DISC 5  
MUTING  
R6P (SUM-3)/AA (15F)  
type dry-cell batteries  
(supplied)  
AUX TV SOUND  
TV VOL  
CHANNEL AUDIO VOL  
pg. 14  
AUDIO  
TV  
pg. 11 – 38  
pg. 11  
pg. 11  
VCR  
pg. 17  
pg. 19, 35  
TUNING  
TUNING  
SLOW  
MEMORY  
FM MODE  
SLOW  
pg. 17,  
35  
pg. 20,  
24  
pg. 19, 27  
pg. 17, 36  
pg. 20, 24  
TOP MENU/PG  
MENU/PL  
If the range or effectiveness of the remote control decreases,  
replace both batteries.  
pg. 15,  
32  
ENTER  
ON  
CAUTION  
• Do not expose batteries to heat or flame.  
SCREEN  
REC  
pg. 12,  
19  
pg. 22  
TITLE/GROUP  
AUDIO  
pg. 20  
Operating the system from the remote  
control  
Aim the remote control directly to the front panel of the center unit.  
• Do not hide the remote sensor.  
pg. 27  
pg. 26  
Number  
buttons:  
pg. 19  
SUBTITLE  
ANGLE  
PAGE  
100+  
TV RETURN  
pg. 26  
pg. 29  
REPEAT PLAY MODE CANCEL  
pg. 28  
pg. 29  
pg. 15, 28  
pg. 28  
pg. 37  
pg. 15  
pg. 24  
pg. 30  
SET UP SETTING  
TA/NEWS/INFO  
ZOOM  
SCAN MODE  
pg. 32  
pg. 31  
pg. 38  
pg. 14  
VFP  
PTY SEARCH  
FL DISPLAY DIMMER SLEEP  
SMART  
RETURN  
TREBLE  
pg. 18  
pg. 22  
pg. 16  
S.SETUP BASS  
SURROUND  
pg. 15  
FRONT L CENTER FRONT R  
S.WFR  
LEVEL  
pg. 15  
SURR. L  
SURR. R  
NOTE  
• To use the buttons  
under the cover, slide  
down the cover.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Do not connect the power cord until all other connections have been made.  
If reception is poor  
Connecting the FM and  
AM (MW) antennas  
Center unit  
AM (MW) loop  
antenna  
7 AM (MW) loop antenna  
Setting up supplied AM loop antenna  
Outdoor single vinyl-covered wire antenna  
(not supplied)  
If the antenna cord is covered with the insulation  
coat, twist and pull the insulation coat off and  
remove.  
7 FM antenna  
FM antenna (supplied)  
Center unit  
Extend the supplied FM antenna  
horizontally.  
Connecting AM (MW) loop antenna  
1
Center unit  
If reception is poor  
Center unit  
Outdoor FM antenna  
(not supplied)  
2
Standard type (75 C  
coaxial) connector  
Outdoor FM antenna cord  
(not supplied)  
Antenna cord  
NOTE  
• We recommend that you use coaxial cable for the FM antenna as it is  
well-shielded against interference.  
3
• Turn the loop antenna until you have the best reception during  
AM (MW) broadcast program reception.  
NOTE  
• Make sure the antenna conductors do not touch any other terminals,  
connecting cords and power cords. This could cause poor reception.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not connect the power cord until all other connections have been made.  
Connections  
Connecting the satellite  
(front, center, surround)  
speakers  
Before connecting the speaker cords;  
Twist and pull the insulation coat off and remove.  
Front speakers  
SP-THC3F  
Powered subwoofer  
SP-PWC3  
Speaker cord  
• Connect the black cords to the black (r) terminals.  
• Connect the white cords to the (q) terminals  
referring to the table below:  
FRONT SPEAKERS (LEFT)  
FRONT SPEAKERS (RIGHT)  
CENTER SPEAKER  
White  
Red  
Green  
Blue  
SURROUND SPEAKERS (LEFT)  
SURROUND SPEAKERS (RIGHT)  
FROM  
XV-THC3  
XV-THS55  
XV-THS58  
XV-THS66  
Gray  
4
16  
Surround speakers  
SP-THC3S  
Center speaker  
SP-THC3C  
Precautions for daily use  
CAUTION  
• When moving the speakers, do not pull the speaker cords;  
otherwise, the speakers may fall over, causing damage or injury.  
• When holding a speaker, always grasp the lower portion.  
• Do not lean against the speakers, as the speakers could fall down  
or break, possibly causing an injury. Especially be careful that  
children do not lean against them.  
• When you connect speakers other than the supplied ones, use  
speakers of the same speaker impedance (SPEAKER IMPEDANCE)  
indicated near the speaker terminals on the rear of the powered  
subwoofer.  
• DO NOT connect more than one speaker to one speaker terminal.  
• Be sure to have them installed on the wall by a qualified  
personnel.  
• DO NOT install the satellite speakers on the wall by yourself to  
avoid unexpected damage from their falling off the wall due to  
incorrect installation or weakness in wall structure.  
Care must be taken in selecting a location for speaker installation  
on a wall. Injury to personnel or damage to equipment may result  
if the speakers installed interfere with daily activities.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not connect the power cord until all other connections have been made.  
Connections  
Speaker layout  
Connecting a TV  
• Distortion of picture may occur when connecting to the TV via a  
VCR, or to a TV with a built-in VCR.  
You need to set “MONITOR TYPE” in the PICTURE menu  
correctly according to the aspect ratio of your TV. (A pg. 33)  
Center speaker  
Front left  
speaker  
Front right  
speaker  
Powered  
subwoofer  
7 To connect a TV equipped with the component video  
input jacks  
Center unit  
TV  
To component  
video input  
Surround left  
speaker  
Surround right  
speaker  
Component video cord (not supplied)  
NOTE  
• Place the satellite speakers on a flat and level surface.  
• The front and center speakers are magnetically shielded to avoid color  
distortions on TVs. However, if not installed properly, they may  
cause color distortions. So, pay attention to the following when  
installing the speakers.  
• If your TV supports progressive video input, you can enjoy a high  
quality picture by setting the progressive scan mode to active.  
(A pg. 15)  
• If the component video input jacks of your TV are of the BNC type,  
use a plug adapter (not supplied) to convert the pin plugs to BNC  
plugs.  
– When placing the speakers near a TV set, turn off the TV’s main  
power switch or unplug it before installing the speakers. Then wait  
at least 30 minutes before turning on the TV’s main power switch  
again.  
• The component video signals can be output only when you select  
“DVD” as the source to play. (A pg. 14)  
Some TVs may still be affected even though you have followed the  
above. If this happens, move the speakers away from the TV.  
• The surround speakers are not magnetically shielded.  
If it is located nearby the TV or monitor, it will probably cause  
color distortion on the screen. To avoid this, do not place the  
speaker nearby the TV or monitor.  
7 To connect a TV with the SCART connector  
Center unit  
TV  
AV  
• Be sure to place the powered subwoofer to the TV’s right. If you place  
the powered subwoofer to the TV’s left, keep sufficient distance  
between them to prevent the TV screen from appearing mottled.  
To SCART  
connector*  
SCART cable (not supplied)  
* Some TV’s SCART connectors output audio signal. In such a  
case, you can enjoy the TV sound through this system.  
NOTE  
• No sound signal comes out from “AV” (SCART) connector.  
• Select the appropriate scan mode according to your TV. See  
“Changing the scan mode” (A pg. 15).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not connect the power cord until all other connections have been made.  
Connections  
Connecting the powered  
subwoofer  
Connecting to a digital  
component  
You can enjoy the sound of a digital component.  
Powered  
subwoofer  
Center unit  
Center unit  
System cord  
(supplied)  
Align the 5marks.  
or  
To digital optical output  
DBS* tuner  
MD player  
Align the 5marks.  
Digital optical cord (not supplied)  
NOTE  
• The way of connecting the system cord varies depending on the type  
of the powered subwoofer.  
* DBS = Direct Broadcasting Satellite  
NOTE  
When playing a video component such as a DBS tuner;  
• To listen to the sound, select “AUX D” as the source to play.  
(A pg. 14)  
• To see the picture, connect the video output jack of the component to  
the video input jack of the TV directly, and select the correct input  
mode on the TV.  
Connecting to an analog  
component  
You can enjoy the sound of an analog component.  
Center unit  
Connecting the power  
cord  
Make sure that all other connections have been completed.  
Center unit  
Powered  
subwoofer  
RCA pin plug cord  
(not supplied)  
To audio output  
Power cord  
(Supplied)  
Power cord  
VCR  
TV  
Cassette recorder  
Plug into AC outlets.  
NOTE  
• If you connect a sound-enhancing device such as a graphic equalizer  
between the source components and this system, the sound output  
through this system may be distorted.  
CAUTION  
• Disconnect the power cord before cleaning or moving the system.  
• Do not pull on the power cord to unplug the cord. When unplugging  
the cord, always grasp and pull the plug so as not to damage the cord.  
• When playing a video component such as a VCR;  
To listen to the sound, select “AUX” as the source to play.  
(A pg. 14)  
To see the picture, connect the video output jack of the component  
to the video input jack of the TV directly, and select the correct  
input mode on the TV.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating external components with the remote control  
4 Press number buttons (1-9, 0) to enter  
The buttons described below are used on pages 11 and  
12.  
the manufacturer’s code (2 digits).  
Examples:  
For a Hitachi TV:  
Press 0, then 7.  
For a Toshiba TV:  
Press 2, then 9.  
TV/VIDEO  
TV  
VCR  
Manufac-  
turer  
Manufactur-  
er  
Code  
Code  
JVC  
Akai  
01  
Nordmende  
Okano  
13, 14, 18, 26 – 28  
02, 05  
09  
TV VOL  
CHANNEL  
Blaupunkt 03  
Orion  
15  
Remote control  
mode selector  
TV  
Daewoo  
Fenner  
Fisher  
10, 31, 32  
Panasonic  
Philips  
16, 17  
VCR  
04, 31, 32  
05  
10  
Saba  
13, 14, 18, 26 – 28  
(play button)  
Grundig  
Hitachi  
Inno-Hit  
Irradio  
06  
Sanyo  
05  
07, 08  
09  
Schneider  
Sharp  
02, 05  
20  
ENTER  
02, 05  
Sony  
21 – 25  
REC  
Magnavox 10  
Telefunken  
13, 14, 18, 26 – 28  
13, 14, 18,  
26 – 28, 30  
Mitsubishi 11, 33  
Thomson  
Toshiba  
Miver  
Nokia  
03  
29  
Number  
buttons  
12, 34  
100+  
TV RETURN  
5 Release  
TV.  
If there is more than one code listed for corresponding brand,  
try each one until you enter the correct one.  
NOTE  
• Manufacturers’ codes are subject to change without notice.  
• Set the codes again after replacing the batteries of the remote control.  
7 Operation  
Aim the remote control at the TV.  
IMPORTANT  
Before using the remote control to operate a TV;  
• Set the remote control mode selector to TV.  
Operating the TV  
The following buttons are available:  
TV:  
TV VOL +/–:  
TV/VIDEO:  
Turns TV on and off.  
Adjusts the volume.  
Selects the input mode (either TV or  
VIDEO).  
7 To set the manufacturer’s code  
You can operate a JVC TV without setting the manufacturer’s code.  
1 Slide the remote control mode selector  
CHANNEL +/–:  
Changes the channels.  
to TV.  
1-10, 0, +10 (100+): Selects the channel.  
TV RETURN: Alternates between the previously selected  
channel and the current channel.  
2 Press and hold TV.  
Keep the button pressed until step 4 is finished.  
3 Press ENTER.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 11 for button locations.  
Operating external components with the remote control  
Operating the VCR  
7 To set the manufacturer’s code  
1 Slide the remote control mode selector  
to VCR.  
2 Press VCR.  
3 Press and hold FVCR.  
Keep the button pressed until step 5 is finished.  
4 Press ENTER.  
5 Press number buttons (1-9, 0) to enter  
the manufacturer’s code (2 digits).  
Examples:  
For a Panasonic VCR:  
Press 2, then 1.  
For a Philips VCR:  
Press 0, then 5.  
Manufac-  
turer  
Manufac-  
turer  
Code  
Code  
JVC  
01  
Nokia  
16  
Aiwa  
02, 20  
Nordmende 17 – 19, 31  
Bell+Howell 03, 16  
Orion  
20  
Blaupunkt  
CGM  
04  
Panasonic  
Philips  
Phonola  
Saba  
21  
03, 05, 16  
34  
05, 22  
Daewoo  
Digtal  
05  
05  
17 – 19, 23, 31  
24, 25  
Fisher  
03, 16  
06  
Samsung  
Sanyo  
G.E.  
03, 16  
Grundig  
Hitachi  
Loewe  
07  
Sharp  
26, 27  
08, 09  
05, 10, 11  
04, 05  
12 – 15  
Siemens  
Sony  
07  
28 – 30, 35  
17 – 19, 31, 32  
33  
Magnavox  
Mitsubishi  
Telefunken  
Toshiba  
6 Release FVCR.  
If there is more than one code listed for your brand, try each  
one until you enter the correct one.  
7 Operation  
Aim the remote control at the VCR.  
IMPORTANT  
Before using the remote control to operate a  
VCR;  
• Set the remote control mode selector to VCR.  
The following buttons are available:  
FVCR : Turns VCR on and off.  
3(play button): Starts playback.  
7:  
8 :  
Stops operation.  
Pauses playback.  
y :  
1:  
REC:  
Fast forwards video tape.  
Rewinds video tape.  
Press this button together with 3(play button) to  
start recording or together with 8to pause  
recording.  
CHANNEL +/: Changes the TV channels on the VCR.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
The buttons on the remote control are used to explain most of the  
operations in this manual. You can use the buttons on the center  
unit same as on the remote control for operations unless  
otherwise noted.  
Turning the system on/off  
On the remote control:  
Press  
AUDIO.  
IMPORTANT  
Before using the remote control for the following  
On the center unit:  
Press  
.
operation;  
• Set the remote control mode selector to AUDIO.  
When DVD is selected as the source (A pg. 14), the following  
messages will appear on the TV screen.  
The buttons described below are used on  
pages 13 to 16.  
• “OPEN”/“CLOSE”:  
Appears when opening or closing the disc tray.  
• “NOW READING”:  
TV SOUND  
Source  
selecting  
buttons  
Appears when the system is reading the disc information.  
• “REGION CODE ERROR!”:  
Remote control  
mode selector  
Appears when the Region Code of the DVD VIDEO does not  
match the code the system supports. The disc cannot be  
played back.  
• “NO DISC”:  
Appears when no disc is loaded.  
• “CANNOT PLAY THIS DISC”:  
Appears when unplayable disc is loaded.  
Cursor  
(3/2/Y/5)/  
ENTER  
NOTE  
• The STANDBY lamp turns on when the power is turned off and turns  
off when the power is turned on.  
• The power supply to the subwoofer is linked to the center unit. The  
POWER ON lamp on the subwoofer lights green when the power is  
turned on.  
• A small amount of the power is consumed even when the power is  
turned off (center unit only). This is called standby mode and the  
STANDBY lamp lights in this mode. Unplug the power cord from the  
AC outlet to turn the power off completely.  
• You can also turn on the system by pressing the following buttons;  
DIMMER SLEEP  
SMART  
One of 0buttons on the center unit  
One of the source selecting buttons on the remote control  
One of the DISC (1-5) 3buttons or 3on the center unit  
You can use the same buttons on the remote control.  
S.SETUP BASS  
TREBLE  
LEVEL  
BASS/  
LEVEL  
FRONT L CENTER FRONT R  
Speaker  
buttons  
S.WFR  
SURR. L  
SURR. R  
SOURCE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 13 for button locations.  
Basic operations  
Selecting the source to  
play  
Listening with headphones  
(not supplied)  
On the remote control:  
CAUTION  
Be sure to turn down the volume;  
Press one of the source selecting buttons  
(DVD, FM/AM, AUX or TV SOUND).  
• Before connecting or putting on headphones as high volume may  
damage both the headphones and your hearing.  
• Before disconnecting headphones as high volume may be suddenly  
output from the speakers.  
DVD:  
To play back a disc (DVD VIDEO, VCD etc.).  
(A pg. 17)  
FM/AM:  
To tune in an FM or AM station. (A pg. 35)  
Each time you press the button, the band alternates  
between FM and AM.  
While connecting a pair of headphones to the PHONES jack on the  
center unit, the system automatically cancels the surround mode  
(A pg. 21) currently selected, deactivates the speakers, turns the  
subwoofer’s power off, and activates the headphone mode. “H.  
PHONE” appears on the display window.  
AUX:  
To select the source from a component connected to  
the AUX IN jacks or DIGITAL IN jack. (A pg. 10)  
Each time you press the button, the source alternates  
between “AUX” and “AUX D”.  
Headphone mode  
When using the headphones, the following signals are output  
regardless of your speaker setting;  
TV SOUND: To select the TV (that outputs sound signals)  
connected to the AV (SCART) connector. (A pg. 9)  
• For 2 channel sources, the front left and right channel signals are  
output from the headphones.  
On the center unit:  
• Multi-channel signals are down-mixed and output from the  
headphones.  
Press SOURCE repeatedly until the source  
name you want appears on the display  
window.  
• (For DVD AUDIO) When the disc prohibits down-mixing, only  
the front left and right channels are output from the headphones.  
In this case, “LR ONLY” appears on the display window for a  
few seconds.  
NOTE  
• When a source except DVD is selected, this system does not output  
video signals.  
• It may take time to change the source.  
Turning off the sound  
temporarily [MUTING]  
Press MUTING.  
Adjusting the volume  
[VOLUME]  
To restore the sound  
Perform one on the following:  
CAUTION  
• Press MUTING again.  
• Press AUDIO VOL +/(or turn VOLUME on the center unit).  
• Always set the volume to minimum level before starting any source.  
If the volume is set at its high level, the sudden blast of sound could  
permanently damage your hearing and/or blow out the speakers.  
Adjusting the brightness  
of the indications  
[DIMMER]  
On the remote control:  
Press AUDIO VOL +/–.  
On the center unit:  
Turn VOLUME.  
Press DIMMER.  
Each time you press the button, the brightness level changes.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 13 for button locations.  
Basic operations  
Sleep Timer [SLEEP]  
The system turns off automatically when the specified period of  
time has passed.  
Changing the scan mode  
The system can be accommodated to your TV’s scan mode.  
NOTE  
Press SLEEP.  
Each time you press the button, the shut-off time changes.  
• To use the system in PROGRESSIVE mode, it is required that the  
center unit is connected to the TV by using a component video cord  
(not supplied). (A pg. 9)  
Example:  
7While DVD is selected as the source and stopped  
minutes  
1 Press and hold SCAN MODE for  
S L E E P  
6 0  
2 seconds.  
“RGB”, “Y/C”, or “PROGRESS” appears on the display  
window.  
To check the remaining time  
Press SLEEP once.  
2 Press Cursor 3/2to select the desired  
mode.  
• RGB:  
To change the remaining time  
Press SLEEP repeatedly.  
Select this when your TV accommodates  
the interlaced RGB/composite video  
signal.  
To cancel  
Press SLEEP repeatedly until “SLEEP – –” appears.  
• Turning off the power also cancels the Sleep Timer.  
• Y/C:  
Select this when your TV accommodates  
the interlaced S-video signal.  
Select this when your TV equipped with  
component jacks supports the progressive  
video input.  
• PROGRESS:  
Adjusting the output level  
of the subwoofer and  
speakers  
Press each speaker button you want to  
adjust the output level and then LEVEL +/–.  
You can get better picture quality in the order —  
“PROGRESSIVE” > “RGB” > “Y/C” > Composite.  
3 Press ENTER while the selected mode  
is displayed.  
When “PROGRESS” is selected, the PROGRESSIVE  
indicator lights on the display window.  
FRONT L:  
FRONT R:  
SURR. L:  
SURR. R:  
CENTER:  
S.WFR:  
Front Left speaker  
Front Right speaker  
Surround Left speaker  
Surround Right speaker  
Center speaker  
NOTE  
• Although the picture may be distorted when you press ENTER, this  
is not a malfunction of the system.  
• “RGB” is selected at your purchase.  
Subwoofer  
• There are some progressive TVs and High-Definition TVs that are  
not fully compatible with this system, resulting in an unnatural  
picture when playing back a DVD VIDEO in the progressive scan  
mode. In such a case, change the scan mode to “RGB” or “Y/C”.  
To check the compatibility of your TV, contact your local JVC  
customer service center.  
NOTE  
• You can also make adjustments by using the setup menu shown on the  
TV screen. (A pg. 34)  
• The adjustments take effect for all sources.  
• All JVC progressive TVs and High-Definition TVs are fully  
compatible with this system.  
Adjusting the treble  
sound [TREBLE]  
Press TREBLE and then LEVEL +/–.  
NOTE  
• The adjustments take effect for all sources.  
Adjusting the bass sound  
[BASS]  
Press BASS and then LEVEL +/–.  
NOTE  
• The adjustments take effect for all sources.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 13 for button locations.  
Basic operations  
Optimizing the speaker  
settings [Smart Surround  
Setup]  
NOTE  
• When you change the positioning of the speakers or listener, or  
replace the supplied speakers with other ones, perform Smart  
Surround Setup again.  
7While DVD is selected as the source and stopped  
1 Take your position where you listen to  
the sound.  
2 Press and hold SMART S. SETUP.  
“SETTING” appears on the display window.  
3 Clap your hands over your head once.  
4 Make sure that “COMPLETED !”  
appears on the TV screen, then press  
SMART S. SETUP.  
The system detects your clapping sound through the satellite  
speakers, then automatically makes the best settings for each  
speaker. “COMPLETED !” appears on the TV screen when  
Smart Surround Setup completes.  
When “FAILED !” appears on the TV screen  
The system could not detect the clapping sound correctly. In such a  
case, follow the instructions that appear on the TV screen.  
• When the system detects the clapping sound as “FAILED !” three  
times, set the delay time (DELAY) and the output level (LEVEL)  
manually. (A pg. 34)  
To cancel  
Press SMART S. SETUP.  
NOTE  
• You need to set the subwoofer’s output level (LEVEL) manually.  
(A pg. 15)  
• In step 2, “SW ERROR” appears on the display window if the center  
unit and the powered subwoofer are not connected correctly by using  
the supplied system cord.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
DVD  
VIDEO  
• The icon such as  
shows the disc formats or file types the  
Basic playback  
operation is available for.  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
DVD DVD DVD  
VIDEO AUDIO VR  
1 Press the desired DISC (1-5)  
0on the center unit.  
• The system turns on and the disc tray  
comes out.  
2 Press DVD.  
2 Place a disc.  
Label side up  
The buttons described below are used on pages 17 to 20.  
When placing an 8 cm  
disc  
2
2
C
IS  
I
SC  
D
D
1
1
C
IS  
I
SC  
D
D
DISC 1  
DISC 3  
DVD  
DISC 2  
DISC 4  
DISC 5  
3 Press DISC (1-5).  
For MP3/WMA files  
AUDIO  
(play button)  
Remote control  
mode selector  
The file control display (A pg. 25) appears on the TV screen.  
For JPEG files  
Each file (still pictures) is shown on the TV screen for about 3  
seconds (slide-show). When stopping playback, the file control  
TOP MENU/PG  
MENU/PL  
display (A pg. 25) appears on the TV screen.  
TOP MENU/PG  
MENU/PL  
For DVD VR disc  
Pressing TOP MENU/PG or MENU/PL shows the control display  
on the TV screen. (A pg. 20)  
ENTER  
7 To pause playback  
Press 8.  
To return to playback, press 3(play button).  
TITLE/GROUP  
Number buttons  
7 To stop  
Press 7.  
7 On-screen guide icons  
During DVD VIDEO playback, the following guide icons may  
appear for a while on the TV screen;  
FL DISPLAY  
: appears at the beginning of a scene containing multi-  
subtitle languages.  
: appears at the beginning of a scene containing multi-audio  
languages.  
: appears at the beginning of a scene containing multi-angle  
views.  
(Play),  
(Pause),  
/
(Fast forward/  
fast-reverse),  
reverse): appears when you perform each operation.  
/
(Slow-motion forward/  
: the disc cannot accept an operation you have tried to do.  
NOTE  
• Up to 5 discs can be loaded.  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
• You can also start playback by pressing 3(play button) or DVD.  
• The system plays back available discs sequentially until you stop  
playback or until the disc loaded on the DISC 5 tray reaches to the  
end. However, when DVD VIDEO or DVD AUDIO is loaded in the  
system, playback of the disc next to the DVD VIDEO or DVD  
AUDIO will not start.  
• (For JPEG) The system cannot accept operations even though you  
press any buttons before the entire picture appears on the TV screen.  
• If you do not want the on-screen guide icons to appear, see page 34.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 17 for button locations.  
Playback  
MP3/WMA file  
7 Playback information on the display window  
DVD VIDEO  
Example:  
When an MP3 is played back  
Example:  
Signal and speaker  
indicators  
When a DVD VIDEO encoded with Dolby Digital 5.1ch is played  
Track number  
Elapsed playing time  
Chapter number  
(hour:minute:second)  
:
1 2 3  
1 2 3 4  
MP3  
SURR  
1: 2 3: 3 1  
2 4  
MP3 indicator*1  
Elapsed playing time (minute:second)  
(during playback only)  
Signal and speaker indicators (A pg. 22)  
Surround mode and digital signal format (A pg. 22)  
Pressing FL DISPLAY  
Group number  
Pressing FL DISPLAY  
2
G 1 2  
T 1  
3
Title number  
Chapter number  
MP3  
Track number  
T
C 2 4  
1 5  
SURR  
*1 WMA indicator lights for WMA disc.  
JPEG file  
DVD AUDIO  
File number  
Signal and speaker indicators  
1 2 3  
J P E  
G
:
:
5
2
1 2 3  
P LPCM  
1
4
Track number  
Elapsed playing time  
(hour:minute:second)  
Pressing FL DISPLAY  
Group number  
File number  
Pressing FL DISPLAY  
G 1 2  
F 1 2 3  
Group number  
Track number  
2
P LPCM  
3
T 1  
G
DVD VR disc  
Example:  
During playback on the Original program*  
VCD/SVCD/CD  
Elapsed playing time  
(hour:minute:second)  
Example:  
Title number  
When a CD is played back  
2 2  
0: 2 0: 3 6  
Signal and speaker  
indicators  
Track number  
PG  
PG (Original program) indicator  
LPCM  
1 2  
3: 3  
1
Pressing FL DISPLAY  
Title number  
Elapsed playing time (minute:second)  
Chapter number  
NOTE  
• When a VCD or SVCD with PBC function is played, the elapsed  
P G  
1 C  
3
PG  
playing time does not appear, but “PBC” appears.  
Continued on next page  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 17 for button locations.  
Playback  
Example:  
During playback on the Playlist*  
Fast-forward/fast-reverse  
search  
7During playback  
Elapsed playing time  
(hour:minute:second)  
Title number  
DVD DVD DVD  
VIDEO AUDIO VR  
3 0  
0: 5 0: 3 0  
PL  
On the remote control:  
Press y or 1.  
Each time you press the button, the search speed  
PL (Playlist) indicator  
Pressing FL DISPLAY  
changes.  
To return to normal speed playback  
Playlist number  
Chapter number  
Press 3(play button).  
Press and hold xor 4.  
Continuously pressing xor 4increases the fast-forward/  
reverse search speed.  
P L  
1 C  
1
PL  
* Pressing TOP MENU/PG or MENU/PL, you can change the  
play mode. (A pg. 20)  
NOTE  
• The operation with xor 4above is available for a disc other  
than MP3 and WMA.  
NOTE  
• You can change the time information mode (except for MP3/WMA/  
• When a DVD VIDEO, DVD VR, VCD and SVCD is played back, no  
sound comes out during fast-forward/reverse search.  
• When a DVD AUDIO or CD is played back, sound is intermittent and  
low during fast-forward/reverse search.  
JPEG). (A pg. 23)  
• You can also check the playback information on the TV screen.  
(A pg. 22)  
• This feature may not work for some discs.  
7 Disc information on the display window  
The disc indicators on the display window show the current status  
of the corresponding disc tray.  
Skip to the beginning of a  
desired selection  
Example:  
When the discs are loaded to disc trays 1, 2 and 5, and the disc in the  
disc tray 5 is selected.  
DVD DVD DVD  
VIDEO AUDIO VR  
7 Using x/4buttons  
7For DVD VIDEO/DVD VR (chapter):  
During playback  
For VCD/SVCD (track):  
Currently selected  
disc number  
During playback without PBC function  
For DVD AUDIO/CD/MP3/WMA/JPEG (track/file): During  
playback or while stopped  
Currently loaded disc number  
Press xor 4repeatedly.  
NOTE  
• When playing back an MP3/JPEG file, you can make operations  
7 Screen saver  
A TV screen may burn out if a static picture is displayed for a long  
time. To prevent this, the system automatically dims the screen if a  
static picture is displayed for over 5 minutes (the screen saver  
function).  
using the file control display. (A pg. 25)  
• This feature may not work for some discs.  
7 Using number buttons on the remote control  
• Pressing any button will cancel the screen saver function.  
• If you do not want to use the screen saver function, see page 33.  
7For DVD VIDEO/DVD VR (title, chapter):  
While stopped, the title number is selected.  
During playback, the chapter number is selected.  
For DVD AUDIO (track):  
During playback or while stopped  
For VCD/SVCD (track):  
During playback without PBC function  
For CD/MP3/WMA/JPEG (track/file):  
During playback or while stopped  
One Touch Replay  
You can move back the playback position by 10 seconds  
from the current position.  
7During playback  
DVD DVD  
VIDEO VR  
Press number buttons (0-10, +10) to select  
the desired number.  
• For details on using the number buttons, see “How to use the  
On the remote control:  
Press  
.
number buttons” below.  
NOTE  
• This function works in the same title.  
How to use the number buttons  
• This function is not available during the repeat playback.  
• This feature may not work for some discs.  
To select 3:  
To select 14:  
To select 24:  
To select 40:  
Press 3.  
Press +10, then 4.  
Press +10 twice, then 4.  
Press +10 three times, then 10.  
Or press +10 four times, then 0.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 17 for button locations.  
Playback  
Locating a desired title/  
group using number  
buttons  
Selecting the desired  
title/playlist from the  
control display  
7During playback or while stopped.  
7During playback or while stopped  
DVD DVD  
VIDEO AUDIO  
1 Press TITLE/GROUP.  
1 Press TOP MENU/PG or MENU/PL.  
“_ _” or “_” is shown in the title/group  
display area in the display window.  
The control display is shown on the TV screen, and the system  
starts playback of the first title/playlist.  
• The PLAY LIST is shown only when the playlist is on the  
DVD VR disc.  
Example:  
During DVD VIDEO playback  
TOP MENU/PG: shows the ORIGINAL PROGRAM.  
Example:  
_ _  
:
:
1 2 3 4 5  
.
ORIGINAL PROGRAM  
2 While the display window shows “_ _”  
or “_”, use number buttons (0-10, +10)  
to enter the desired title or group  
number.  
No Date  
Ch  
Time  
Title  
1 25/04/04 4ch 19:00  
2 17/05/04 8ch 10:30  
3 22/05/04 8ch 17:00  
4 26/05/04 L-1 13:19  
5 20/06/04 4ch 22:00  
JVC DVD World 2004  
Music Festival  
children 001  
6 25/06/04 L-1  
8:23  
children 002  
The system starts playback from the first chapter/track/file of  
the selected title/group.  
• For details on using the number buttons, see “How to use the  
number buttons” (A pg. 19).  
*1  
*2  
*3  
*4  
*5  
*6  
*1: Title number  
*2: Recording date  
NOTE  
• This feature may not work for some discs.  
*3: Recording source (TV station, the input terminal of the  
recording equipment etc.)  
*4: Start time of recording  
Playing back a bonus  
group  
*5: Title of the original program/playlist (The title may not be  
displayed depending on the recording equipment.)  
*6: Current title  
Some DVD AUDIOs have a special group called “bonus  
group” whose contents are not open to the public. The  
DVD  
AUDIO  
MENU/PL: shows the PLAY LIST.  
Example:  
bonus group is always assigned to the last group of a disc.  
To play back a bonus group, you have to enter the specific “key  
number” (a password). The way of getting the key number depends  
on the disc. After getting the key number, you can play back the  
bonus group by following the procedure below.  
PLAY LIST  
No Date  
Chap Length  
Title  
1 25/05/04 001 1:03:16  
2 17/06/04 005 1:35:25  
3 20/06/04 003 0:10:23  
4 25/06/04 001 0:07:19  
My JVC World  
7While the BONUS indicator lights up on the display window  
Favorite music  
children001-002  
1 Select the bonus group.  
For selecting the group, see “Locating a desired title/group  
using number buttons” described above.  
The key number entry indication appears.  
On the TV  
*7  
*8  
*9  
*10  
*5  
*11  
*7: Playlist number  
*8: Creating date of playlists  
*9: Number of chapters  
*10:Total playing time  
*11:Current playlist  
On the display window  
_ _ _ _  
K E Y  
2 Press Y/5to select the desired title/  
The system starts playback of the selected title/playlist.  
BONUS  
playlist.  
2 Press number buttons (0-9) to enter the  
key number, then press ENTER.  
To clear the control display  
• Press ENTER.  
When you enter the correct key number, playback starts and  
the BONUS indicator goes off.  
• If you enter the wrong number, reenter the correct number.  
About the play mode on a DVD VR disc  
To clear the key number entry  
Perform whichever one of the following:  
• Open the disc tray.  
• Original program (ORIGINAL PROGRAM):  
The system can play back the original picture in the recorded  
order.  
• Turn off the system.  
• Playlist (PLAY LIST):  
The system can play back the playlist edited by the recording  
equipment.  
NOTE  
• In Random Playback, tracks in the bonus group are not played back.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
DVD  
VIDEO  
• The icon such as  
shows the disc formats or file types the  
Using the surround mode  
7 Auto Surround (AUTO SUR)  
Used to reproduce the sound as it is recorded without any  
conversion (downmixing or simulation, etc.). For example, a  
multichannel source is automatically reproduced in multichannel  
audio.  
operation is available for.  
IMPORTANT  
Before using the remote control for the following  
operation;  
• Set the remote control mode selector to AUDIO.  
• There are exceptions in the operation mentioned  
above. In such a case, follow each instruction.  
7 Dolby Surround  
Dolby Pro Logic II*1  
The buttons described below are used on pages 21 to 31.  
Dolby Pro Logic II has a newly developed multichannel playback  
format to decode all 2 channel sources — stereo source and Dolby  
Surround encoded source — into a 5.1 channel.  
Dolby Pro Logic II has two modes — Movie mode and Music  
mode:  
AUDIO  
(play button)  
Remote control  
mode selector  
SLOW  
SLOW  
• Pro Logic II Movie (MOVIE)  
Suitable for reproduction of Dolby Surround encoded sources  
SLOW  
/
MENU/PL  
TOP MENU/PG  
bearing the mark  
• Pro Logic II Music (MUSIC)  
.
/PG  
/PL  
Cursor  
(3/2/Y/5)/  
ENTER  
Suitable for reproduction of any 2 channel stereo music sources.  
Dolby Digital*1  
Used to reproduce multichannel soundtracks of the software  
encoded with Dolby Digital (  
).  
2
7 DTS Digital Surround*  
Used to reproduce multichannel soundtracks of the software  
Number buttons  
encoded with DTS Digital Surround (  
).  
DTS Digital Surround (DTS) is another discrete multichannel  
digital audio format available on CD and DVD software.  
SURROUND  
Available Surround modes for each input signal  
The B marks show available surround modes.  
*1  
Surround  
off  
Auto  
Surround  
DTSDigital Linear Packed  
Surround  
Manufactured under  
license from Dolby  
Laboratories. Dolby,  
Pro Logic, MLP  
Lossless, and the  
double-D symbol are  
trademarks of Dolby  
Laboratories.  
DTSand DTS  
Digital Surroundare  
registered trademarks  
of Digital Theater  
Systems, Inc.  
Mode  
Dolby Surround  
DSP  
ALL  
PCM  
PCM  
DOLBY  
D
3
3
Signal  
SURR OFF AUTO SUR MOVIE* MUSIC*  
DTS  
LPCM  
PPCM  
3
ST*  
Dolby D  
(Multichannel)  
B
B
B
B
B
Dolby D  
(2 channel)  
B
B
B
*2  
DTS Digital  
Surround  
(Multichannel)  
B
B
B
B
B
DTS Digital  
Surround  
(2 channel)  
B
B
B
B
*3  
You can select these  
modes by pressing  
SURROUND.  
Analog or  
Linear/Packed  
PCM  
B
B
B
B
B
B
(2 channel)  
(A pg. 22)  
Linear/Packed  
PCM  
(Multichannel)  
B
B
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
7 All Channel Stereo (DSP)  
7 When playing back digital multichannel software  
(except during SURR OFF mode)  
The appropriate multichannel surround mode (Dolby D, DTS  
Digital Surround or Linear/Packed PCM) is automatically selected.  
All Channel Stereo (ALL ST) mode can reproduce a larger stereo  
sound field using all the connected (and activated) speakers.  
All Channel Stereo can be used while reproducing 2 channel stereo  
source.  
Normal stereo sound  
All Channel Stereo  
7 When playing back 2 channel source  
You can select either mode of Dolby Pro Logic II (MOVIE/  
MUSIC) or the DSP (ALL ST) mode.  
Press SURROUND repeatedly to select the  
desired mode.  
The surround mode is turned on and the current surround mode  
appears on the display window.  
Each time you press the button, the surround mode changes.  
7 Indicators on the display window  
Digital signal format indicators  
For details on each mode, see page 21.  
PPCM, SURR:  
Lights when DVD AUDIO packed PCM signals  
comes in.  
To turn off the surround mode  
Press SURROUND repeatedly until SURR  
OFF appears on the display window.  
LPCM, SURR:  
GD, SURR:  
C, SURR:  
Lights when Linear PCM signal comes in.  
Lights when Dolby D signals come in.  
Lights when DTS Digital (Surround) signals  
come in.  
Storing adjustments — auto memory  
No indication:  
No digital signal indicator lights when analog  
signals come in.  
When you turn the power off, the system memorizes the current  
surround mode. The memorized mode is automatically recalled  
when you turn the power on.  
Dolby Surround/DSP mode indicators  
GPLII, SURR: Lights when Dolby Pro Logic II mode is  
activated.  
NOTE  
• When FM or AM is selected as the source, you can select All Channel  
Stereo (ALL ST) and SURR OFF mode.  
SURR:  
Lights when All Channel Stereo mode is  
activated.  
• For a down-mixing prohibited DVD AUDIO disc, the system  
continues to output multi-channel signals with “MULTI CH” shown  
on the display window even if the surround mode is turned off during  
playback. On the other hand, the system outputs only the front left and  
right channel signals with “LR ONLY” shown on the display window  
when you start playback with the surround mode having been set to  
“SURR OFF” or “H. PHONE”.  
Source signal indicators, etc.  
Light to indicate the incoming signals.  
a: Lights when the left channel signal comes  
in.  
b: Lights when the center channel signal comes in.  
c: Lights when the right channel signal comes in.  
d: Lights when the LFE channel signal comes in.  
g: Lights when the surround left channel signal comes in.  
i: Lights when the surround right channel signal comes in.  
h: Lights when the monaural surround channel signal or 2  
channel Dolby Surround signal comes in.  
SW : Always lights.  
Using the on-screen bar  
You can check disc information and you can use some functions  
using the on-screen bar.  
The channel with “ ” shows that the corresponding speakers are  
reproducing the channelssound.  
If the channelssound decoded into 5.1 channel is reproduced, only  
Showing the on-screen bar  
7Whenever a disc is loaded  
DVD DVD DVD  
lights.  
VIDEO AUDIO VR  
Press ON SCREEN.  
Each time you press the button, the on-screen bar  
changes as follows on the TV screen.  
Selecting the surround mode  
The system is set up to automatically select the optimal surround  
mode for input signal from digital multichannel software.  
When playing back 2 channel source, you can select the desired  
surround mode manually.  
Example:  
During DVD VIDEO playback  
Dolby D  
2/0 . 0ch  
IMPORTANT  
Before using the remote control for the following  
operation;  
Set the remote control mode selector to AUDIO.  
Dolby D  
2/0 . 0ch  
OFF  
(The on-screen bar disappears)  
(back to the beginning)  
The currently selected item shows green.  
Continued on next page  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
G Shows playback status.  
appears during playback.  
: appears during fast forward/reverse.  
7 Contents of the on-screen bar during playback  
DVD VIDEO  
:
/
/
: appears during playback in forward slow-motion/  
reverse slow-motion.  
Dolby D  
2/0 . 0ch  
:
appears when paused.  
:
appears when stopped.  
H Select this to change time information (F). See Changing the  
time informationbelow.  
DVD AUDIO  
I Select this for Repeat Playback. (A pg. 30)  
J Select this for time search function. (A pg. 25)  
K Select this for chapter (for DVD VIDEO and DVD VR) or track  
(for DVD AUDIO) search function. (A pg. 24)  
L Select this to change audio language, channel, or stream.  
(A pg. 27)  
M Select this to change subtitle language and subpicture.  
(A pg. 26)  
N Select this to change view angle. (A pg. 26)  
O Select this to change the page. (A pg. 28)  
P Shows Playback Mode status.  
Dolby D  
2/0 . 0ch  
VCD  
SVCD  
CD  
PROGRAM: appears during Program Playback. (A pg. 29)  
RANDOM: appears during Random Playback. (A pg. 29)  
Changing the time information  
You can change the time information in the on-  
DVD DVD DVD  
VIDEO AUDIO VR  
screen bar on the TV screen and the display  
window of the center unit.  
7During playback  
1 Press ON SCREEN twice.  
The on-screen bar appears on the TV screen.  
2 Press Cursor 3/2to highlight  
.
DVD VR disc  
3 Press ENTER repeatedly to select the  
desired information.  
Dolby D  
2/0 . 0ch  
PG  
1
CHAP  
3
TOTAL 0:00:34  
DVD-VR  
Example:  
ON  
When elapsed playing time of disc is selected.  
A Shows disc type.  
B Shows audio information.  
C Shows disc number.  
7VCD/SVCD/CD  
TIME: Elapsed playing time of current track  
REM:  
Remaining time of current track  
D Shows current title (for DVD VIDEO), group (for DVD  
AUDIO) number or play mode (for DVD VR).  
TOTAL: Elapsed time of disc  
T. REM: Remaining time of disc  
E Shows current chapter number (for DVD VIDEO and DVD VR)  
or track number (for other type of discs).  
F Shows time information. See Changing the time information.  
7DVD VIDEO/DVD AUDIO/DVD VR  
TIME: Elapsed playing time of current chapter/track  
REM:  
Remaining time of current chapter/track  
TOTAL: Elapsed time of Title/Group/Program  
T. REM: Remaining time of Title/Group/Program  
4 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
• When playing back DVD VR, “TIME” and “REM” cannot be shown.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
2 Press number buttons (1-10, +10) to  
For details on using the number buttons, see How to use the  
number buttons(A pg. 19).  
Playing from a specified  
position on a disc  
You can start playing a title, chapter or track you specify. You can  
select the number of the desired item.  
To return to the menu  
also play a disc from specified time.  
Press RETURN.  
When “NEXT” or “PREVIOUS” is shown on the TV  
screen:  
Locating a desired scene from the DVD  
menu  
DVD VIDEOs generally have their own menus which show  
To go to the next page, press x.  
To return to the previous page, press 4.  
DVD  
disc contents and you can display them on the TV screen.  
You can locate a desired scene by using these menus.  
VIDEO  
NOTE  
• If you want to play a PBC-compatible VCD/SVCD without using the  
PBC function, perform any of the following:  
7Whenever a DVD VIDEO is loaded  
Start playback by pressing number buttons while stopped.  
Press xrepeatedly until the desired track number is displayed,  
then start playback by pressing 3(play button).  
The track number appears on the display window instead of  
“PBC”.  
1 Press TOP MENU/PG or MENU/PL.  
The menu appears on the TV screen.  
Example:  
• To activate the PBC function when playing a PBC-compatible VCD/  
SVCD without using the PBC function, perform any of the following:  
Press TOP MENU/PG or MENU/PL.  
Press 7twice to stop playback, then press 3(play button).  
Locating a desired chapter/track using the  
on-screen bar  
Normally, a DVD VIDEO which contains more than one title  
will have a topmenu which lists the titles. Press  
TOP MENU/PG to show the title menu.  
Some DVD VIDEO may also have a different menu which is  
shown by pressing MENU/PL.  
7During playback  
DVD DVD DVD  
VIDEO AUDIO VR  
See the instructions for each DVD VIDEO regarding its  
particular menu.  
1 Press ON SCREEN twice.  
The on-screen bar appears on the TV screen.  
2 Use Cursor 3/2/Y/5to select a  
2 Press Cursor 3/2to highlight  
/
desired item.  
.
3 Press ENTER.  
3 Press ENTER.  
With some discs, you can also select items by entering the  
corresponding number using number buttons.  
Example:  
During DVD VIDEO playback  
Dolby D  
Locating a desired scene using a VCD/  
SVCD menu with PBC  
2/0 . 0ch  
A VCD or SVCD recorded with PBC has its own  
menus such as a list of contained songs. You can locate  
a specific scene by using these menus.  
4 Press number buttons (0-9) to enter the  
desired chapter number.  
Example:  
7During playback with PBC function  
To select 8:  
To select 10:  
To select 20:  
To select 37:  
Press 8.  
1 Press RETURN repeatedly until the  
Press 1, then 0.  
Press 2, then 0.  
Press 3, then 7.  
menu appears on the TV screen.  
Example:  
To correct a misentry  
Repeat step 4.  
5 Press ENTER.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
• You can select up to the 99th chapter/track.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
Locating a desired position by specifying  
the time  
Using the file control  
display  
You can search and play desired groups and tracks/files  
using the file control display on the TV screen.  
7For DVD VIDEO/DVD AUDIO/DVD VR:  
During playback  
DVD DVD DVD  
VIDEO AUDIO VR  
For VCD/SVCD:  
While stopped or during playback without PBC  
Current group/total group Playback mode (PROGRAM,  
function  
number  
RANDOM, REPEAT)  
For CD:  
During playback or while stopped  
Elapsed playing time of current  
track (for MP3/WMA only)  
Tag information (for MP3/  
WMA only)  
7 When specifying the elapsed playing time from the  
beginning of the disc  
Perform the following procedure while stopped.  
7 When specifying the elapsed playing time from the  
beginning of the current title/track  
Perform the following procedure during playback.  
1 Press ON SCREEN twice.  
The on-screen bar appears on the TV screen.  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
Dolby D  
2/0 . 0ch  
Current group  
Current track (file)  
Current track (file) / total track  
(file) number on current group  
Total track (file)  
number on disc  
4 Use number buttons (0-9) to enter the  
time.  
Playback status  
Example:  
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)  
elapsed  
The file control display appears automatically during playback  
(MP3/WMA) or while stopped.  
7For MP3/WMA:  
During playback or while stopped  
For JPEG:  
Press 2  
Press 4  
Press 3  
Press 0  
While stopped  
1 Press Cursor 3/2/Y/5to select the  
For MP3/WMA, playback starts from the selected track.  
Press 8  
To cancel a misentry  
Press Cursor 2repeatedly.  
desired group/track/file.  
2 Press 3(play button) or ENTER.  
file.  
5 Press ENTER.  
Track playback/slide-show starts from the selected track/  
6 Press ON SCREEN.  
When you press ENTER for JPEG, only the selected file is  
played back.  
The on-screen bar disappears.  
NOTE  
• You can specify time in hours/minutes/seconds for DVD VIDEO/  
DVD AUDIO/DVD VR and in minutes/seconds for VCD/SVCD/CD.  
NOTE  
• (For MP3/WMA) During playback, you can locate the desired track/  
file by pressing x/4or Cursor 5/Y.  
• You can also check playback information on the display window.  
(A pg. 18)  
• Some group, track and file names may not be displayed correctly  
depending on recording conditions.  
• The order of groups, tracks and files may be displayed differently  
from the order displayed on your personal computer.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
Resume Playback  
Selecting the subtitle  
When Resume Playback is set to ON(A pg. 34)  
and you stop playback by the following operations,  
the position where playback has been stopped is  
stored. (RESUMEappears on the display  
window.)  
7During playback of a disc containing subtitles in  
several languages  
DVD DVD DVD  
VIDEO AUDIO VR  
DVD DVD DVD  
VIDEO AUDIO VR  
When using the SUBTITLE button:  
1 Press SUBTITLE.  
Turning off the power (A pg. 13)  
Pressing 7once  
Changing the source (A pg. 14)  
Example (DVD VIDEO):  
ENGLISHis selected out of 3 subtitle languages recorded.  
To start playback from the stored position  
Press 3(play button) or DVD.  
There may be a case where 3(play button) does not work after  
changing the source.  
2 Press Cursor Y/5to select the desired  
To clear the stored position  
Press 7again or open the disc tray with the playback disc.  
subtitle.  
For DVD VR  
Pressing SUBTITLE activates the subtitles (subpictures)  
regardless of whether the subtitles are recorded or not.  
(subpictures will not change if no subpictures is recorded.)  
Selecting a view angle  
7During playback of a disc containing multi-view  
angles  
DVD DVD  
VIDEO AUDIO  
For SVCD  
An SVCD can contain up to four subtitles. Pressing  
SUBTITLE changes the subtitles regardless of whether the  
subtitles are recorded or not. (Subtitles will not change if no  
subtitle is recorded.)  
When using the ANGLE button:  
1 Press ANGLE.  
Example:  
NOTE  
The first view angle is selected out of 3 view angles recorded.  
• To clear the subtitle, press SUBTITLE. Each time you press  
SUBTITLE, subtitle appears and disappears alternately.  
When using the on-screen bar:  
1 Press ON SCREEN twice.  
2 Press ANGLE repeatedly or press  
Cursor Y/5to select the desired view  
angle.  
The on-screen bar appears on the TV screen.  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
When using the on-screen bar:  
Dolby D  
2/0 . 0ch  
1 Press ON SCREEN twice.  
The on-screen bar appears on the TV screen.  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
4 Press Cursor Y/5repeatedly to select  
the desired subtitle.  
Dolby D  
2/0 . 0ch  
5 Press ENTER.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
4 Press Cursor Y/5to select the desired  
NOTE  
• To clear the subtitle, press SUBTITLE. Each time you press  
SUBTITLE, subtitle appears and disappears alternately.  
• Some subtitle or audio languages are abbreviated in the pop-up  
window. See “The language codes list” (A pg. 32).  
• During DVD AUDIO playback, this feature is available only for the  
video part.  
view angle.  
5 Press ENTER.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
• During DVD AUDIO playback, this feature is available only for the  
video part.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
Selecting the audio  
7During playback of a disc containing audio in  
several languages  
Special picture playback  
DVD DVD DVD  
VIDEO AUDIO VR  
Frame-by-frame playback  
7During playback  
When using the AUDIO button:  
DVD DVD DVD  
VIDEO AUDIO VR  
Press 8repeatedly.  
Each time you press the button, the still picture  
advances by one frame.  
1 Press AUDIO.  
Example (DVD VIDEO):  
ENGLISHis selected out of 3 audio languages recorded.  
To return to normal playback  
Press 3(play button).  
Playing back in slow-motion  
7During playback  
DVD DVD DVD  
VIDEO AUDIO VR  
2 Press AUDIO repeatedly or press  
Cursor Y/5to select the desired audio.  
1 Press 8at the point where  
you want to start playback in  
slow-motion from.  
The system pauses playback.  
When using the on-screen bar:  
1 Press ON SCREEN twice.  
The on-screen bar appears on the TV screen.  
2 Press SLOW 9.  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
Playback in forward slow-motion starts.  
For DVD VIDEO/DVD AUDIO only:  
To play back in reverse slow-motion, press SLOW (.  
Dolby D  
2/0 . 0ch  
Each time you press the button, the playback speed become  
faster.  
Example: On the TV  
4 Press Cursor Y/5to select the desired  
audio.  
To return to normal playback  
Press 3(play button).  
5 Press ENTER.  
NOTE  
6 Press ON SCREEN.  
• Sound cannot be heard during slow-motion playback.  
• During DVD AUDIO playback, this feature is available only for the  
video part.  
The on-screen bar disappears.  
NOTE  
• Some subtitle or audio languages are abbreviated in the pop-up  
window. See “The language codes list” (A pg. 32).  
• “ST”, “L” or “R” is displayed when playing a VCD, SVCD or DVD  
VR respectively representing “stereo”, “left sound” and “right  
sound”.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
Selecting browsable still picture recorded  
on DVD AUDIO  
Changing the VFP setting  
The VFP (Video Fine Processor) function enables  
you to adjust the picture character according to the  
type of programming, picture tone or personal  
preference.  
DVD DVD DVD  
VIDEO AUDIO VR  
Most DVD AUDIOs include browsable still pictures  
(B.S.P.), which usually appear by turns automatically  
during playback according to the playback sequence. You  
DVD  
AUDIO  
can change the picture (turn the page) manually when the current  
group/track has selectable pictures (pages).  
7During playback  
1 Press VFP.  
7During playback and while the B.S.P. indicator lights up on the  
display window  
The current VFP settings appear on the TV screen.  
Example:  
When using the PAGE button:  
Press PAGE repeatedly to select a desired  
still picture.  
When using the on-screen bar:  
1 Press ON SCREEN twice.  
The on-screen bar appears on the TV screen.  
2 Press Cursor 3/2repeatedly to select  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
the VFP mode.  
NORMAL:Normally select this.  
CINEMA: Suitable for movies.  
When you select NORMALor CINEMA, press VFP to  
complete the setting.  
Dolby D  
2/0 . 0ch  
USER 1 and USER 2:  
You can adjust parameters that affect picture  
appearance.  
4 Press Cursor 5/Yto select the desired  
Only when selecting USER 1or USER 2in step  
2, proceed to perform the following operation;  
still picture.  
5 Press ENTER.  
3 Press Cursor Y/5repeatedly to select  
6 Press ON SCREEN.  
a parameter you want to adjust.  
The on-screen bar disappears.  
Adjust gradually and confirm picture appearance results are as  
preferred.  
GAMMA:  
Zooming in  
7During playback or while paused  
Controls brightness of neutral tints while maintaining  
brightness of dark and bright portions.  
BRIGHTNESS:  
DVD DVD DVD  
VIDEO AUDIO VR  
Controls screen brightness.  
CONTRAST:  
1 Press ZOOM.  
magnification changes.  
Each time you press ZOOM, scene  
Controls screen contrast.  
SATURATION:  
Controls screen color depth.  
TINT:  
Controls screen tint.  
2 While zoomed in, press Cursor 3/2/Y/  
5to move zoom-in area.  
SHARPNESS:  
Controls screen sharpness.  
To return to normal playback  
Press ZOOM repeatedly to select ZOOM OFF.  
4 Press ENTER.  
NOTE  
• The number of the magnification steps varies depending on the disc  
Example:  
type.  
• During slide-show playback of JPEG, zooming in is not available. In  
such a case, press 8to pause slide-show playback, then zoom in.  
• During DVD AUDIO playback, this feature is available only for the  
video part.  
5 Press Cursor Y/5to change the  
• During playback, there may be a case where Cursor (3/2/Y/5)  
does not work in step 2 above.  
setting.  
6 Press ENTER.  
The current VFP settings appear again.  
7 Repeat steps 3 to 6 to adjust other  
parameters.  
8 Press VFP.  
NOTE  
• Although the setting display disappears in the middle of the  
procedure, the setting at that time will be stored.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
3 Press 3(play button).  
Program Playback  
7While stopped  
If all of the programmed tracks/files have been played back,  
playback stops and the program window appears again. Note  
that program setting remains.  
DVD DVD  
VIDEO AUDIO  
To check the program contents  
During playback, press 7. Playback stops and the program window  
appears.  
1 Press PLAY MODE  
repeatedly until program  
window appears on the TV screen.  
To quit the Program mode  
While stopped, press PLAY MODE repeatedly until both program  
window and  
disappear from the TV screen.  
NOTE  
• There may be a case where bonus group on a DVD AUDIO cannot be  
played.  
• The Resume function cannot be used with Program Playback.  
• Program Playback may not work for some discs.  
USE NUMERIC KEYS TO PROGRAM TRACKS.  
USE CANCEL TO DELETE THE PROGRAM.  
Random Playback  
You can play titles or tracks on a disc in random  
order.  
2 Follow the instructions that appear on  
the TV screen to program the desired  
chapters/tracks.  
DVD DVD  
VIDEO AUDIO  
7While stopped  
For details on using the number buttons, see How to use the  
number buttons(A pg. 19).  
The contents numbers that you have to specify for  
programming varies depending on the disc type:  
1 Press PLAY MODE  
repeatedly until  
appears on the TV screen.  
DVD VIDEO:  
VCD, SVCD, CD:  
Titles and chapters  
Tracks  
2 Press 3(play button).  
DVD AUDIO, MP3, WMA:  
Groups and tracks  
When more than one discs are loaded, the system starts  
Random Playback of the next disc after completing current  
disc playback.  
Before you program the tracks in bonus group on a DVD  
AUDIO, perform the procedure of Playing back a bonus  
group(A pg. 20) to turn off the BONUS indicator on the  
display window.  
To quit Random mode  
While stopped, press PLAY MODE repeatedly until both program  
You can specify the chapters/tracks whose number is up to  
99.  
window and disappear from the TV screen.  
You can also clear the Random mode by turning off the system.  
There may be a case that the group or title number can be  
entered even for discs that contain no groups or titles. In  
such a case, press ENTER to proceed to the Track/Chapter  
column.  
NOTE  
• The same title/track will not be played back more than once during  
Random Playback.  
When you press ENTER instead of the number buttons in  
the Track/Chapter column, ALLappears and all the tracks  
or chapters on the selected group or title are programmed as  
a step.  
To clear the programs one by one from the last  
entered number  
Press CANCEL repeatedly.  
To clear all programs  
Press 7.  
You can also clear the program by turning off the system.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
When using the on-screen bar (except for MP3/  
WMA/JPEG):  
Repeat Playback  
1 Press ON SCREEN twice.  
Repeating the current selection or all  
discs  
7For DVD VIDEO/DVD VR:  
During playback  
The on-screen bar appears on the TV screen.  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
DVD DVD DVD  
VIDEO AUDIO VR  
Dolby D  
2/0 . 0ch  
For VCD/SVCD:  
During playback without PBC function or  
stopped  
For DVD AUDIO/CD/MP3/WMA/JPEG:  
During playback or stopped  
4 Press Cursor Y/5repeatedly to select  
When using the REPEAT button:  
the Repeat mode.  
Press REPEAT.  
5 Press ENTER.  
: 3  
1
0
1 2  
1:  
1
6 Press ON SCREEN.  
To cancel Repeat Playback  
Select OFFin step 4.  
The on-screen bar disappears.  
Repeat mode indicator  
Each time you press REPEAT, the Repeat mode changes.  
Display  
window  
Repeating a desired part [A-B Repeat]  
TV screen  
Meanings  
You can repeat playback of a desired part by  
DVD DVD DVD  
Repeats the current group for  
DVD AUDIO/MP3/WMA/  
JPEG.  
specifying the beginning (point A) and ending  
(point B).  
VIDEO AUDIO VR  
REPEAT GROUP  
7During playback  
Repeats the current title for  
DVD VIDEO.  
1 Press ON SCREEN twice.  
(For DVD VR) Repeats the  
current title for Original  
program.  
The on-screen bar appears on the TV screen.  
PG  
PL  
2 Press Cursor 3/2to highlight  
3 Press ENTER.  
.
(For DVD VR) Repeats the  
current playlist for Playlist.  
Dolby D  
2/0 . 0ch  
Repeats all titles and tracks on  
the current disc for DVD VR/  
VCD/SVCD/CD/MP3/WMA/  
JPEG.  
DISC  
4 Press Cursor Y/5repeatedly to select  
Repeats all the available discs.  
ALL  
1
“A-B”.  
REPEAT ALL  
,
5 Press ENTER at the beginning of the  
Repeats the current track for  
DVD AUDIO/VCD/SVCD/  
CD/MP3/WMA.  
REPEAT TRACK,  
REPEAT STEP  
part you want to repeat (point A).  
Dolby D  
2/0 . 0ch  
,
Repeats the current chapter for  
DVD VIDEO/DVD VR.  
REPEAT STEP  
6 Press ENTER at the end of the part you  
A-B Repeat Playback starts.  
Repeat mode is off.  
The system plays back the disc  
normally.  
No  
indication  
want to repeat (point B).  
NOTE  
• When DVD VIDEO or DVD AUDIO is loaded in the system,  
7 Press ON SCREEN.  
The on-screen bar disappears.  
playback of the disc next to the DVD VIDEO or DVD AUDIO will  
not start, although  
To cancel  
/REPEAT ALL on the TV screen or  
Select OFFin step 4, then press ENTER.  
ALL in the display window is shown.  
• For DVD VIDEO and DVD AUDIO, REPEAT ALL and REPEAT  
DISC may not be available depending on the disc.  
NOTE  
• When playing back a DVD VIDEO/DVD VR, A-B Repeat Playback  
is possible only within the same title.  
• “A-B” cannot be selected during Program and Random Playback.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 21 for button locations.  
Advanced operations  
Sound settings  
Tray lock  
You can lock the tray and prohibit the unwanted disc ejection.  
IMPORTANT  
Before using the remote control for the following  
operation;  
Set the remote control mode selector to  
AUDIO.  
On the center unit ONLY:  
While the system is turned off  
DISC 1  
NOTE  
Before you start operation;  
• There is a time limit when doing the following steps. If the setting is  
cancelled before you finish, start from step 1 again.  
Press and hold  
1 Press SETTING.  
The system turns on and LOCKEDappears on the display  
window.  
Example:  
If you try to eject the disc, LOCKEDappears to indicate that  
the tray is locked.  
C.  
D E  
A /  
C M  
P
To cancel  
Carry out the same operation again.  
The system turns on and UNLOCKEDappears on the display  
window.  
2 Press Cursor Y/5to select the item  
DEC (Decode):  
you want to set.  
When you play an external source (AUX D is selected as a  
source) that was encoded with Dolby D or DTS Digital  
Surround, the following symptoms may occur;  
No sound comes out at the beginning of playback.  
Noise comes out while searching for or skipping chapters  
or tracks.  
A/PCM (Auto/PCM):  
Normally select this. The system automatically  
detects the incoming signals.  
DD:  
Select this if the symptoms above occur when  
playing a disc (or software) encoded with Dolby  
D.  
DTS:  
Select this if the symptoms above occur when  
playing a disc (or software) encoded with DTS  
Digital Surround.  
3 Press Cursor 3/2to make an  
adjustment or selection.  
Example:  
C.  
D E  
D D  
The adjustment is set and the display automatically disappears  
a few seconds later.  
NOTE  
• When “DD” or “DTS” is selected, if a signal encoded with another  
digital format comes in, you cannot listen to the sound. (The  
GDIGITAL or Cindicator flashes.)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting DVD preferences  
NOTE  
• See the following “The language codes list” for the code of each  
Using the setup menus  
You can change the language used in the setup menus. See  
Menu descriptionbelow.  
language, such as “AA”, etc.  
The language codes list  
Basic operation on the setup menus  
AA Afar  
IK Inupiak  
IN Indonesian  
IS Icelandic  
IW Hebrew  
RN Kirundi  
RO Rumanian  
RU Russian  
RW Kinyarwanda  
SA Sanskrit  
SD Sindhi  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
AB Abkhazian  
AF Afrikaans  
AM Ameharic  
AR Arabic  
JI  
Yiddish  
2 Press DVD.  
AS Assamese  
AY Aymara  
AZ Azerbaijani  
BA Bashkir  
BE Byelorussian  
BG Bulgarian  
BH Bihari  
JW Javanese  
KA Georgian  
KK Kazakh  
SG Sangho  
SH Serbo-Croatian  
SI Singhalese  
SK Slovak  
KL Greenlandic  
KM Cambodian  
KN Kannada  
KO Korean (KOR)  
KS Kashmiri  
Cursor  
(3/2/Y/5)/  
ENTER  
SL Slovenian  
SM Samoan  
SN Shona  
BI Bislama  
BN Bengali, Bangla KU Kurdish  
SO Somali  
BO Tibetan  
BR Breton  
CA Catalan  
CO Corsican  
CS Czech  
KY Kirghiz  
LA Latin  
SQ Albanian  
SR Serbian  
SS Siswati  
7While stopped  
LN Lingala  
LO Laothian  
LT Lithuanian  
ST Sesotho  
SU Sundanese  
1 Press SET UP.  
CY Welsh  
LV Latvian, Lettish SV Swedish  
DA Danish  
DZ Bhutani  
EL Greek  
MG Malagasy  
MI Maori  
SW Swahili  
TA Tamil  
MK Macedonian  
ML Malayalam  
MN Mongolian  
MO Moldavian  
MR Marathi  
TE Telugu  
TG Tajik  
EO Esperanto  
ET Estonian  
EU Basque  
FA Persian  
FI Finnish  
FJ Fiji  
TH Thai  
TI Tigrinya  
TK Turkmen  
TL Tagalog  
TN Setswana  
TO Tonga  
TR Turkish  
TS Tsonga  
TT Tatar  
MS Malay (MAY)  
MT Maltese  
2 Follow the instructions that appear on  
the TV screen.  
FO Faroese  
FY Frisian  
GA Irish  
MY Burmese  
NA Nauru  
NE Nepali  
Menu description  
GD Scots Gaelic  
GL Galician  
GN Guarani  
GU Gujarati  
HA Hausa  
NL Dutch  
NO Norwegian  
OC Occitan  
TW Twi  
UK Ukrainian  
UR Urdu  
:Language menu (LANGUAGE)  
OM (Afan) Oromo  
OR Oriya  
UZ Uzbek  
VI Vietnamese  
WO Wolof  
VO Volapuk  
XH Xhosa  
YO Yoruba  
7MENU LANGUAGE  
Some DVDs have their own menus in multiple languages.  
Select the initial language*.  
HI Hindi  
PA Panjabi  
HR Croatian  
HU Hungarian  
HY Armenian  
IA Interlingua  
IE Interlingue  
PL Polish  
PS Pashto, Pushto  
PT Portuguese  
QU Quechua  
7AUDIO LANGUAGE  
Some DVDs have multiple audio languages.  
Select the initial audio language*.  
RM Rhaeto-Romance ZU Zulu  
7SUBTITLE  
Some DVDs have multiple subtitle languages.  
Select the initial subtitle language*.  
7ON SCREEN LANGUAGE  
Select the language shown on the TV screen when operating this  
system.  
* When the language you have selected is not recorded to a disc,  
the original language is automatically used as the initial  
language.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting DVD preferences  
:Audio menu (AUDIO)  
7D. RANGE COMPRESSION  
(Dynamic range compression)  
You can enjoy low level recorded sound clearly at night even at a  
low volume when listening to the sound with Dolby Digital.  
• AUTO  
:Picture menu (PICTURE)  
7MONITOR TYPE  
You can select the monitor type to match your TV when you play  
DVDs recorded in the pictures height/width ratio of 16:9.  
• 16:9 (Wide television conversion)  
Select this when the aspect ratio of your TV is fixed on 16:9  
(wide TV).  
When you play DVDs recorded in the pictures height/width  
ratio of 4:3, the system adjust the ratio of output signal  
automatically.  
Select this when you want to enjoy surround sound with its  
full dynamic range (no effect applied).  
• ON  
Select this when you want to fully apply the compression  
effect (useful at midnight).  
• 4:3 LB (Letter Box conversion)  
Select this when the aspect ratio of your TV is 4:3  
(conventional TV). While viewing a wide screen picture, the  
black bars appear on the top and the bottom of the screen.  
• 4:3 PS (Pan Scan conversion)  
Select this when the aspect ratio of your TV is 4:3  
(conventional TV). While viewing a wide screen picture, the  
black bars do not appear, however, the left and right edges of  
the pictures will not be shown on the screen.  
NOTE  
• When you play a multichannel Dolby Digital source with the  
surround mode is off, the setting of D. RANGE COMPRESSION is  
set to ON automatically.  
Ex.: 16:9  
Ex.: 4:3 LB  
Ex.: 4:3 PS  
NOTE  
• Even if “4:3 PS” is selected, the screen size may become “4:3 LB”  
with some DVDs. This depends on how DVDs are recorded.  
7PICTURE SOURCE  
When you set the scan mode to PROGRESS(A pg. 15), you can  
obtain optimal picture quality by selecting whether the content on  
the disc is processed by frame (film source) or by field (video  
source) .  
Normally set to AUTO.  
• AUTO  
Used to play a disc containing both video and film source  
materials.  
This system recognizes the source type (video or film) of the  
current disc according to the disc information.  
If the playback picture is unclear or noisy, or the oblique  
lines of the picture are rough, try to change to other modes.  
• FILM  
Suitable for playing back a film source disc.  
• VIDEO  
Suitable for playing back a video source disc.  
7SCREEN SAVER (A pg. 19)  
You can activate or deactivate Screen Saver function.  
7FILE TYPE  
When several types of files are recorded on a disc, you can select  
which files to play.  
• AUDIO  
Select this to play MP3/WMA files.  
• STILL PICTURE  
Select this to play JPEG files.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting DVD preferences  
:Speaker setting menu  
(SPK. SETTING)  
:Other setting menu (OTHERS)  
7RESUME  
You can activate or deactivate Resume Playback function.  
7Level menu (LEVEL)  
(A pg. 26)  
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/  
CENTER SPEAKER/SURROUND RIGHT SPEAKER/  
SURROUND LEFT SPEAKER  
7ON SCREEN GUIDE  
You can activate or deactivate the on-screen guide icons.  
(A pg. 17)  
While monitoring the test tone, adjust the output level of the  
speakers.  
TEST TONE*  
Outputs the test tone.  
* The test tone comes out of all of the activated speakers in the  
following sequence:  
sFront left speaker sCenter speaker sFront right  
speaker sSurround right speaker sSurround left  
speaker s(back to the beginning)  
7Delay menu (DELAY)  
Example:  
Center  
speaker  
1 ms  
Subwoofer  
Front right  
0 ms  
Front left  
0 ms  
Surround left  
2 ms  
Surround right  
2 ms  
In this case, set the delay time of each speaker as follows;  
Delay time of front speakers: 0 ms  
Delay time of center speaker: 1 ms  
Delay time of surround speakers: 2 ms  
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/  
CENTER SPEAKER/SURROUND RIGHT SPEAKER/  
SURROUND LEFT SPEAKER  
Adjust the distance from the listening position to the speakers.  
Within the range from 0 ms to 15 ms. (by 1 ms)  
7Subwoofer menu (SUBWOOFER)  
LEVEL  
You can set the output level of the subwoofer in the -6 dB to +6 dB  
range.  
CROSS OVER  
The signals below the preset frequency level will be sent to and be  
reproduced by the subwoofer.  
Select one of the cross over frequency levels according to the bass  
sound quality from the front/center/surround speakers.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner operations  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
Preset tuning  
Once a station is assigned to a channel number, the station can be  
quickly tuned in. You can preset 30 FM and 15 AM stations.  
2 Press FM/AM.  
7 To preset the stations  
NOTE  
• When FM or AM is selected as the source, you can select All Channel  
1 Tune in the station you want to preset.  
If you want to store the FM reception mode for an FM  
station, select the reception mode you want. See Selecting  
the FM reception mode(A pg. 36).  
Stereo (ALL ST) and SURR OFF mode.  
The buttons described below are used on pages 35 to 38.  
Example:  
FM/AM  
When the system is tuned in to 103.5 MHz.  
FM  
MHz  
1 0 3 5 0  
.
AUDIO  
Remote control  
mode selector  
TUNING  
TUNING  
2 Press MEMORY.  
MEMORY  
FM MODE  
/
FM  
MHz  
CH _ _  
5 0  
1 0 3  
.
While CHand “– –” are flashing:  
3 Press number button(s) (1-10, +10) to  
select a preset number you want.  
For details on using the number buttons, see How to use the  
number buttons(A pg. 19).  
Number buttons  
Example:  
When the preset channel 1 is selected.  
FM  
MHz  
0
1
1
3 5 0  
.
CH  
TA/NEWS/INFO  
PTY SEARCH  
If the setting is cancelled before you finish, start from step 2  
again.  
PTY SEARCH  
While the selected number is flashing:  
4 Press MEMORY.  
Manual tuning  
The selected number stops flashing.  
The station is assigned to the selected preset number.  
If the setting is cancelled before you finish, start from step 2  
again.  
1 Press FM/AM repeatedly to select the  
band.  
Example:  
5 Repeat steps 1 to 4.  
stored one.  
When the system is tuned in to 810 kHz.  
Storing a new station to a used number erases the previously  
AM  
8
0 kHz  
1
7 To tune in to a preset station  
1 Press FM/AM repeatedly to select FM or  
2 Press TUNING 9/(repeatedly until  
AM.  
you find the frequency you want.  
When you hold down the button until the system starts  
searching for stations and then release it, the system stops  
searching automatically when a station of sufficient signal  
strength is tuned in to.  
2 Press number button(s) (1-10, +10) to  
select a preset number.  
For details on using the number buttons, see How to use the  
number buttons(A pg. 19).  
NOTE  
• When an FM stereo program is received, the ST indicator lights on the  
display window.  
NOTE  
• You can also select a preset number by pressing y /1.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 35 for button locations.  
Tuner operations  
With the system, you can receive the following types of RDS  
signals:  
Selecting the FM  
reception mode  
When the stereo FM program currently tuned in is noisy, you can  
PS (Program Service):  
PTY (Program Type):  
RT (Radio Text):  
Shows commonly known station names.  
Shows types of broadcast programs.  
Shows text messages the station sends.  
Enhanced Other Network: See page 38.  
change the FM reception mode to improve the reception.  
7While listening to an FM station  
NOTE  
• RDS is not available for AM (MW) broadcasts.  
Press FM MODE.  
The FM reception mode appears on the display window.  
Each time you press the button, the FM reception mode changes.  
• AUTO:  
• RDS may not operate correctly if the station tuned is not transmitting  
RDS signal properly or if the signal strength is weak.  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
When a program is broadcast in stereo, you will hear stereo  
sound. (The ST indicator lights on the display window.) When in  
monaural, you will hear monaural sound. This mode is also  
useful to suppress static noise between stations.  
• MONO:  
Reception will be improved although you will lose the stereo  
effect. (The MONO indicator lights on the display window.) In  
this mode, you will hear noise until you are tuned in to a station.  
2 Press FM/AM.  
7 To show the RDS signals  
information  
Press FL DISP. while listening to an FM  
station.  
Each time you press the button, the indication on the display  
Reducing the noise of AM  
(MW) broadcast  
When listening to an AM (MW) broadcast with a lot of noise  
interference, you can change the Beat Cut mode to reduce the  
noise.  
window changes.  
PS (Program Service):  
While searching, PSappears and then the station names will be  
displayed. NO PSappears if no signal is sent.  
PTY (Program Type):  
7While listening to an AM (MW) station  
Press FM MODE.  
While searching, PTYappears and then the type of the broadcast  
program will be displayed. NO PTYappears if no signal is sent.  
RT (Radio Text):  
The current Beat Cut mode appears on the display window.  
Each time you press the button, the Beat Cut mode changes.  
Choose BEATCUT1or BEATCUT2according to which  
gives clearer sound.  
While searching, RTappears and then text messages the station  
sends will be displayed. NO RTappears if no signal is sent.  
Frequency:  
Station frequency (non-RDS service).  
Using the RDS (Radio  
Data System) when  
receiving FM stations  
About characters shown on the display window  
When PS, PTY, or RT signals appear on the display window, some  
special characters and marks may not be displayed correctly.  
NOTE  
• If searching finishes at once, “PS”, “PTY”, and “RT” will not appear  
on the display window.  
RDS allows FM stations to send an additional signal along with  
their regular program signals. For example, the stations send their  
station names, as well as information about what type of program  
they broadcast, such as sports or music, etc.  
When tuned in to an FM station which provides the RDS service,  
the RDS indicator lights up on the display window.  
FM  
MHz  
1 0 3 5 0  
.
RDS  
RDS indicator  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 35 for button locations.  
Tuner operations  
Description of the PTY codes  
Searching for a program by PTY codes  
One of the advantages of the RDS service is that you can locate a  
particular kind of program from the preset channels (A pg. 35) by  
specifying the PTY codes.  
NEWS:  
News.  
AFFAIRS:  
Topical program expanding or enlarging upon  
the news debate, or analysis.  
INFO:  
Programs the purpose of which is to impart  
advice in the widest sense.  
7 To search for a program using the PTY codes  
SPORT:  
Programs concerned with any aspect of sports.  
Educational programs.  
NOTE  
Before you start operation;  
• The PTY Search is only applicable to preset stations.  
• To stop searching any time during the process, press PTY SEARCH  
while searching.  
EDUCATE:  
DRAMA:  
CULTURE:  
All radio plays and serials.  
Programs concerning any aspect of national or  
regional culture, including language, theater,  
etc.  
• There is a time limit in doing the following steps. If the setting is  
canceled before you finish, start from step 1 again.  
SCIENCE:  
VARIED:  
Programs about natural sciences and  
technology.  
1 Press PTY SEARCH while listening to  
PTYand SELECTflashes alternately on the display  
window.  
Used for mainly speech-based programs such as  
quizzes, panel games and personality  
interviews.  
an FM station.  
POP M:  
Commercial music of current popular appeal.  
Rock music.  
7While PTYand SELECTis flashing alternately:  
ROCK M:  
EASY M:  
2 Press PTY 9or PTY (until the PTY  
Current contemporary music considered to be  
easy-listening.  
code you want appears on the display  
window.  
For details, see Description of the PTY codes.  
LIGHT M:  
Instrumental music, and vocal or choral works.  
CLASSICS:  
Performances of major orchestral works,  
symphonies, chamber music, etc.  
While the PTY code selected in step 2 is still on the display  
window:  
OTHER M:  
Music not fitting into any of the other  
categories.  
WEATHER:  
FINANCE:  
CHILDREN:  
SOCIAL:  
Weather reports and forecasts.  
3 Press PTY SEARCH again.  
Stock Market reports, commerce, trading etc.  
Programs targeted at a young audience.  
While searching, SEARCHand the selected PTY code  
alternate on the display window.  
The system searches 30 preset FM stations, stops when it finds  
the one you have selected, and tunes in that station.  
Programs about sociology, history, geography,  
psychology and society.  
To continue searching after the first stop  
Press PTY SEARCH again while the indications on the display  
window are flashing.  
RELIGION:  
PHONE IN:  
Religious programs.  
Involving members of the public expressing  
their views either by phone or at a public forum.  
If no program is found, NO FOUNDappears on the display  
window.  
TRAVEL:  
LEISURE:  
JAZZ:  
Travel information.  
Programs about recreational activities.  
Jazz music.  
COUNTRY:  
Songs which originate from, or continue the  
musical tradition of the American Southern  
States.  
NATION M:  
OLDIES:  
Current popular music of the nation or region in  
that countrys language.  
Music from the so-called golden ageof  
popular music.  
FOLK M:  
Music which has its roots in the musical culture  
of a particular nation.  
DOCUMENT: Programs concerning factual matters, presented  
in an investigative style.  
TEST:  
Broadcasts for testing emergency broadcast  
equipment or unit.  
ALARM:  
NONE:  
Emergency announcement.  
No program type, undefined program, or  
difficult to categorize into particular types.  
NOTE  
Classification of the PTY codes for some FM stations may be  
different from the above list.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See page 35 for button locations.  
Tuner operations  
The TEST signal is used for equipment test — whether it  
can receive the Alarm signal correctly  
Switching to broadcast program of your  
choice temporarily  
The TEST signal makes the system work in the same way as the  
Alarm signal does. If the TEST signal is received, the system  
automatically switches to the station broadcasting the TEST signal.  
While receiving the TEST signal, TESTappears on the display  
window.  
Another convenient RDS service is called Enhanced Other  
Network.  
This allows the system to switch temporarily to a broadcast  
program of your choice (TA, NEWS, and/or INFO) from a different  
station except in the following cases;  
When you are listening to non-RDS stations (all AM MW  
stations, some FM stations and other sources).  
When the system is in standby mode.  
7 How the Enhanced Other Network function actually  
works  
Case 1  
If there is no station broadcasting the program you have  
selected  
NOTE  
Before you start operations;  
The Enhanced Other Network function is only applicable to preset  
The system continues tuning in to the current station.  
stations.  
When a station starts broadcasting the program you have selected,  
the system automatically switches to the station. The indicator of  
received PTY code starts flashing.  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
When the program is over, the system goes back to the previously  
tuned station, but the Enhanced Other Network function still  
remains activated.  
2 Press FM/AM.  
Press TA/NEWS/INFO  
Case 2  
If the FM station you are listening to is broadcasting the  
program you have selected  
repeatedly until the program type indicator  
(TA/NEWS/INFO) you want appears on the  
display window.  
Each time you press the button, the indicator on the display window  
changes.  
The system continues to receive the station but the indicator of  
received PTY code starts flashing.  
When the program is over, the indicator of received PTY code stops  
flashing and remains lit, but the Enhanced Other Network function  
still remains activated.  
FM  
MHz  
1
1 0 3 5 0  
TA NEWS INFO  
CH  
.
NOTE  
The program type indicator  
Traffic Announcement in your area.  
In Enhanced Other Network standby mode, if you change the source  
to play, Enhanced Other Network standby mode is canceled  
temporarily.  
TA:  
NEWS: News.  
If you change the source to FM again, the system returns to  
Enhanced Other Network standby mode.  
INFO: Program the purpose of which is to impart advice in the  
widest sense.  
Enhanced Other Network data sent from some stations may not be  
compatible with this system.  
To stop listening to the program selected by Enhanced  
Other Network  
Enhanced Other Network does not function for some FM stations  
with RDS service.  
Press TA/NEWS/INFO repeatedly again so that the program type  
indicator (TA/NEWS/INFO) goes off from the display window. The  
system exits from Enhanced Other Network standby mode and goes  
back to the previously selected station.  
While listening to a program tuned in by the Enhanced Other Network  
function, the station does not change even if another network station  
starts broadcasting a program of the same Enhanced Other Network  
data.  
While listening to a program tuned in by the Enhanced Other  
Network function, you can only use TA/NEWS/INFO and FL  
DISP. as the tuner operation buttons.  
When an emergency broadcast (ALARM signal) is sent  
from an FM station  
The system automatically tunes in to the station and ALARM”  
appears on the display window while the system receiving the  
emergency broadcast.  
Note that an emergency broadcast cannot be received in the  
following cases;  
When you are listening to non-RDS stations (all AM MW  
stations, some FM stations and other sources).  
When the system is in standby mode.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
References  
To clean the disc  
Wipe the disc with a soft cloth in a straight line  
from center to edge.  
• DO NOT use any solvent — such as  
conventional record cleaner, spray,  
thinner or benzine — to clean the disc.  
Maintenance  
7 Handling Discs  
Remove the disc from its case by holding it at  
the edge while pressing the center hole lightly.  
Do not touch the shiny surface of the disc or  
bend the disc.  
7 Cleaning the system  
Stains on the system should be wiped off with a soft cloth. If the  
system is heavily stained, wipe it with a cloth soaked in water-  
diluted neutral detergent and wrung well, then wipe clean with a  
dry cloth.  
Put the disc back in its case after use to  
prevent warping.  
Be careful not to scratch the surface of the  
disc when placing it back in its case.  
Avoid exposure to direct sunlight, temperature  
extremes and moisture.  
Since the system may deteriorate in quality, become damaged or  
get its paint peeled off, be careful about the following.  
DO NOT wipe it with a hard cloth.  
DO NOT wipe it strong.  
DO NOT wipe it with thinner or benzine.  
DO NOT apply any volatile substance such as insecticides to it.  
DO NOT allow any rubber or plastic to remain in contact with  
it for a long time.  
Troubleshooting  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
Power does not come  
on.  
The power cord and/or system cord is not connected.  
Connect the power cord and system cord correctly.  
(A pg. 10)  
The remote control does The batteries are exhausted.  
not work.  
Replace the batteries. (A pg. 6)  
Sunlight is falling directly on the remote sensor.  
Hide the remote sensor from direct sunlight.  
No sound.  
The system cord and/or speaker cord is not connected. Check the connection.  
The audio cord is not connected to AUX IN and/or  
DIGITAL IN correctly.  
Connect the cord correctly. (A pg. 10)  
An incorrect source has been selected.  
The decode mode is not set correctly.  
Select the correct source. (A pg. 14)  
Select the proper decode mode. (A pg. 31)  
Connect the cord correctly. (A pg. 9)  
Use a playable disc. (A pg. 3)  
No picture is displayed The video cord is not connected correctly.  
on the TV screen.  
The disc is not playable.  
No picture is displayed The scan mode is set to PROGRESSthough the  
on the TV screen, the center unit is connected to the TV which does not  
picture is blurred, or the support the progressive video input such as a  
Change the scan mode to RGBor Y/C. (A pg. 15)  
picture is divided into  
two parts.  
conventional TV.  
Video and audio are  
distorted.  
The disc is scratched or dirty.  
Replace or clean the disc.  
A VCR is connected between the center unit and the  
TV.  
Connect the center unit and TV directly. (A pg. 9)  
The picture does not fit The monitor type is not set correctly.  
the TV screen.  
Set MONITOR TYPEproperly. (A pg. 33)  
Hard to listen to  
broadcast because of  
noise.  
Antennas are disconnected.  
Reconnect the antennas correctly and securely.  
(A pg. 7)  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
References  
7 Subwoofer (SP-PWC3)  
Amplifier section  
Specifications  
Front:  
140W per channel, RMS at 4 C at  
1 kHz, with 10% total harmonic  
distortion.  
7
Audio section  
Center unit (XV-THC3)  
Center/Surround:  
Subwoofer:  
130W per channel, RMS at 4 C at  
1 kHz, with 10% total harmonic  
distortion.  
Total Harmonic Distortion 0.02 %  
NOTE: This value is measured at System cord CONNECTOR for  
reference.  
Digital input*1:  
140 W, RMS at 4 C at 100 Hz, with  
10% total harmonic distortion.  
DIGITAL IN:  
(OPTICAL)  
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital  
21 dBm to 15 dBm  
(660 nm E30 nm)  
Speaker section  
Speaker unit:  
Power Handling Capacity: 140 W  
1
16 cm Bass-reflex  
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)  
Video section  
Video System:  
Impedance:  
Frequency Range:  
4 C  
30 Hz to 200 Hz  
PAL  
Horizontal Resolution:  
Signal-to-Noise Ratio:  
(Composite signal when RGBis selected)  
500 lines  
64 dB  
General  
Power Requirements:  
Power Consumption:  
AC 230 V  
, 50 Hz  
135 W (at operation)  
0 W (in standby mode)  
Video output level  
Composite:  
S-video-Y:  
S-video-C:  
1.0 V(p-p)/75 C  
1.0 V(p-p)/75 C  
0.3 V(p-p)/75 C  
1.0 V(p-p)/75 C  
0.7 V(p-p)/75 C  
0.7 V(p-p)/75 C  
Dimensions (W MH MD):  
169 mm M411 mm M459 mm  
11.3 kg  
Mass:  
Component-Y:  
Component-PB/PR:  
RGB:  
7 Satellite Speakers SP-XTHC3  
Front speakers (SP-THC3F)  
Tuner section  
Tuning Range  
FM:  
Speaker unit:  
8.0 cm cone  
1.5 cm dome  
Bass-reflex, Magnetically Shielded  
87.50 MHz to 108.00 MHz  
522 kHz to 1 629 kHz  
AM (MW):  
Power Handling Capacity: 140 W  
General  
Power Requirements:  
Power Consumption:  
Impedance: 4 C  
Frequency Range: 80 Hz to 20 kHz  
Dimensions (W MH MD):  
AC 230 V , 50 Hz  
19 W (at operation)  
1.4 W (in standby mode)  
104.5 mm M139 mm M101 mm  
0.56 kg each  
Dimensions (W MH MD):  
Mass:  
400 mm M85 mm M399 mm  
4.2 kg  
Center speaker (SP-THC3C)  
Speaker unit: 8.0 cm cone  
1.5 cm dome  
Mass:  
Bass-reflex, Magnetically Shielded  
Power Handling Capacity: 140 W  
Impedance: 4 C  
Frequency Range: 80 Hz to 20 kHz  
Dimensions (W MH MD):  
137 mm M105 mm M104.5 mm  
0.57 kg  
Mass:  
Surround speakers (SP-THC3S)  
8.0 cm cone  
Bass-reflex  
Speaker unit:  
Power Handling Capacity: 140 W  
Impedance: 4 C  
Frequency Range: 80 Hz to 20 kHz  
Dimensions (W MH MD):  
111.5 mm M148 mm M106.5 mm  
0.56 kg each  
Mass:  
Designs & specifications are subject to change without notice.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
© 2005 Victor Company of Japan, Limited  
0405TMMMDWJEM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

JBL Speaker SS88IWS User Manual
John Deere Cultivator OMM147682 B2 User Manual
Jura Capresso Coffeemaker IMPRESSA E50 User Manual
JVC CD Player KD DV5400 User Manual
JVC Speaker SP XF51F User Manual
JVC VCR HR DD858EH User Manual
Kambrook Hot Beverage Maker KQK600 User Manual
Kenmore Range 790 9021 User Manual
Kenwood Two Way Radio TKR 7400S User Manual
KitchenAid Coffee Grinder 4KPCG100PM0 User Manual