JVC Flat Panel Television PD 42V485 User Manual

Plasma Display Users Guide  
For Models:  
PD-42V485  
PD-42V475  
Illustration of PD-42V475 and RM-C1257G  
Important Note:  
In the spaces below, enter the model and serial number of your television (located  
at the rear of the television cabinet). Staple your sales receipt or invoice to the  
inside cover of this guide. Keep this user’s guide in a convenient place for future  
reference. Keep the carton and original packaging for future use.  
Model Number:  
LCT1659-001A-A  
0504TNH-II-IM  
Serial Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
• As an “ENERGY STAR ” partner, JVC has  
determined that this product or product model  
®
meets the “ENERGY STAR ” guidelines for  
energy efficiency.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to  
avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as  
vases, shall be placed on the apparatus.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
16) Avoid improper installation and never position the unit where good ventilation is impossible. When  
installing this TV, distance recommendations must be maintained between the set and the wall,  
as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance  
guidelines shown for safe operation.  
8 inch/200 mm  
8 inch/200 mm  
6 inch/150 mm  
6 inch/150 mm  
2 inch/50 mm  
2 inch/50 mm  
17) Cautions for installation  
— Do not tilt the TV towards the left or right, or towards the back.  
— Install the TV in a corner on the floor so as to keep cords out of the way.  
— The TV will generate a slight amount of heat during operation. Ensure that sufficient space is  
available around the TV to allow satisfactory cooling.  
FCC Notice:  
Note: This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Screen Burn-in  
A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long  
time causes a part of the image to stay on the screen (this is called phosphor burn-in).  
Avoid burn-in as follows.  
IMAGE SHIFT  
The picture displayed on the screen is shifted up, down and to the left and right at regular  
intervals. In order to prevent burn-in, set this function to FAST or STD. (Refer to page 42.)  
Even if the IMAGE SHIFT function is turned off, the picture will shift to the left or right when the  
channel or input is changed. This is only when the ASPECT function is in REGULAR mode.  
VIDEO STATUS  
The VIDEO STATUS function is initially set to DYNAMIC. Unless the TV is being watched in an  
extremely bright room, it is recommended to change the VIDEO STATUS setting to standard,  
theater or game. Doing so will reduce the chance of PDP burn-in and extend the life of the PDP.  
(Refer to page 61).  
Do not display static images or characters for long periods of time.  
TV off  
TV on  
XYZ  
XYZ  
For example...  
• Reduce PICTURE and BRIGHT on the PICTURE ADJUST menu (page 50) when viewing.  
Do not view for long periods of time in the REGULAR mode (page 63).  
Screen size is normally chosen to ensure that the picture is displayed on the entire screen.  
After viewing in the REGULAR mode in which black bands may occur at the left and right of  
the screen, it is recommended to change to the PANORAMA mode to display the picture on the  
entire screen.  
TV off  
TV on  
For example...  
Do not view for long periods of time using the TWIN function (page 57) or INDEX  
function (page 57).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
If Burn-in has occurred  
If burn-in occurs, try the BURN-IN IMAGE REDUCER function (page 52). If burn-in is minimal it  
may gradually become less noticeable.  
Note: Once burn-in occurs it will never disappear completely.  
Point defects  
PDPs use collections of fine pixels to display images. While there is no problem with more than  
99.99% of these pixels, please understand that a very small number of pixels may not light or  
may light all the time.  
Do not install the TV near electronic equipment that is susceptible to electromagnetic  
waves  
It may cause interference in images, sound, etc. In particular, keep video equipment away from  
this product.  
Effect on infrared devices  
There may be interference while using infrared devices such as infrared cordless headphones.  
The phenomenon described below is not a malfunction.  
If the television is used at a location above an altitude of 2,000 m, a buzzing noise and image  
distortion may occur. This phenomenon is peculiar to PDP (Plasma Display Panel), and could  
occur with any television using PDP. It is not a malfunction.  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth,  
slightly moistened with water. You can add a few drops of mild liquid detergent to the water to  
help remove spots of oily dirt.  
DO NOT allow liquid to enter the TV through the ventilation slots.  
DO NOT use strong or abrasive cleaners on the TV.  
DO NOT spray liquids or cleaners directly on the TV’s surface.  
DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
When it gets dirty, wipe it gently with a soft cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safety Precautions . 2  
Warnings . . . . . . . . . . . . 6  
Quick Setup . . . . . . . . . . . 8  
Unpacking your TV . . . . . . . . . . . . 8  
Remove the stand from the TV . . . . . . . 9  
TV Models . . . . . . . . . . . . . . . . 10  
TV Remote Control . . . . . . . . . . . 11  
Getting Started . . . . . . . . . . . . . 12  
The Remote Control . . . . . . . . . . 12  
Sound Adjust . . . . . . . . . 54  
Sound Settings . . . . . . . . . . . . . 54  
Adjust Sound Settings . . . . . . . . . 54  
MTS (Multi-channel Sound)  
.
.
.
.
.
.
.
54  
Clock Timers . . . . . . . . . . 55  
Set Clock . . . . . . . . . . . . . . . . 55  
On/Off Timer . . . . . . . . . . . . . . . 56  
Button Functions . . . . . . . 57  
Multi Screen Function . . . . . . . . . . 57  
Index . . . . . . . . . . . . . . . . . . 57  
Twin . . . . . . . . . . . . . . . . . 57  
Freeze . . . . . . . . . . . . . . . . . . 58  
Swap . . . . . . . . . . . . . . . . . 58  
Select . . . . . . . . . . . . . . . . . . 58  
Power . . . . . . . . . . . . . . . . . . 59  
Number Buttons . . . . . . . . . . . . . 59  
Connecting Your Devices  
.
.
.
.
.
.
.
13  
Interactive Plug In Menu . . . . . . . . 23  
Remote Programming . . . . . 26  
Setting CATV, VCR and DVD Codes  
.
.
.
26  
CATV or Satellite Codes . . . . . . . . 26  
VCR Codes . . . . . . . . . . . . . . 27  
DVD Codes . . . . . . . . . . . . . . 28  
Search Codes . . . . . . . . . . . . . 29  
Tune  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
59  
Input . . . . . . . . . . . . . . . . . . . 59  
Channel +/-  
Volume +/-  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
59  
59  
60  
Onscreen Menus . . . . . . . . 30  
.
.
.
.
.
.
Using the Guide . . . . . . . . . . . . . 30  
Onscreen Menu System . . . . . . . . . 31  
Return +  
.
.
.
.
.
.
.
Sound . . . . . . . . . . . . . . . . . . 60  
Muting . . . . . . . . . . . . . . . . . . 60  
Video Status . . . . . . . . . . . . . . . 61  
TheaterPro D6500K . . . . . . . . . . . 61  
Sleep Timer . . . . . . . . . . . . . . . 61  
Display . . . . . . . . . . . . . . . . . 62  
C.C. . . . . . . . . . . . . . . . . . . . 62  
Aspect . . . . . . . . . . . . . . . . . 63  
Aspect Ratios . . . . . . . . . . . . . 63  
Menu . . . . . . . . . . . . . . . . . . 64  
OK . . . . . . . . . . . . . . . . . . . 64  
Back . . . . . . . . . . . . . . . . . . . 64  
TV/CATV Slide Switch . . . . . . . . . . 65  
VCR/DVD Slide Switch . . . . . . . . . 65  
VCR Buttons . . . . . . . . . . . . . . . 65  
DVD Buttons . . . . . . . . . . . . . . . 65  
Light . . . . . . . . . . . . . . . . . . . 65  
Super Focus . . . . . . . . . . . . . . . 65  
Initial Setup . . . . . . . . . . 33  
Auto Tuner Setup . . . . . . . . . . . . 33  
Channel Summary . . . . . . . . . . . . 33  
V-Chip . . . . . . . . . . . . . . . . . . 35  
Set Lock Code . . . . . . . . . . . . . 41  
Auto Demo . . . . . . . . . . . . . . . 42  
Image Shift  
.
.
.
.
.
.
.
.
.
.
.
.
.
42  
Language . . . . . . . . . . . . . . . . 42  
Closed Caption . . . . . . . . . . . . . 43  
Auto Shut Off . . . . . . . . . . . . . . 44  
XDS ID . . . . . . . . . . . . . . . . . 44  
Noise Muting . . . . . . . . . . . . . . 45  
Front Panel Lock . . . . . . . . . . . . 45  
V1 Smart Input  
Video Input Label  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
46  
46  
Position Adjustment . . . . . . . . . . . 47  
Power Indicator . . . . . . . . . . . . . 47  
Appendices . . . . . . . . . . 66  
No Program . . . . . . . . . . . . . . 66  
Troubleshooting . . . . . . . . . . . . . 67  
Warranty . . . . . . . . . . . . . . . . . 69  
TV Speaker  
Audio Out  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
47  
48  
.
.
.
.
.
.
.
.
Digital-In . . . . . . . . . . . . . . . . . 48  
Digital-In Audio . . . . . . . . . . . . . 49  
Center CH Input . . . . . . . . . . . . . 49  
Authorized Service Centers  
.
.
.
.
.
.
.
70  
Specifications . . . . . . . . . . . . . . . 71  
Picture Adjust . . . . . . . . . 50  
Picture Settings . . . . . . . . . . . . . 50  
Adjust Picture Settings . . . . . . . . . 50  
Color Temperature . . . . . . . . . . . . 50  
Digital Noise Clear . . . . . . . . . . . . 51  
Natural Cinema  
Color Management  
Dynamic Gamma  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
51  
51  
52  
52  
.
.
.
.
.
.
Burn-In Image Reducer  
.
.
.
Reset . . . . . . . . . . . . . . . . . . 53  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new  
television, please check to make sure you have all of the following items.  
TV CATV VCR DVD  
MULTI SCREEN  
POWER  
TWIN  
FREEZE SWAP  
DISPLAY  
INDEX  
C.C.  
SELECT  
INPUT  
1
4
7
2
3
6
SLEEP TIMER  
SOUND  
5
8
0
9
RETURN+  
VIDEO STATUS TUNE  
THEATER PRO ASPECT  
LIGHT  
OK  
MUTING  
CH  
CH  
+
VOL  
VOL  
+
POWER  
MENU  
BACK  
VCR CHANNEL VCR/DVD  
TV/VCR  
PREV NEXT  
POWER  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
TV  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1257G  
TV  
Remote control  
AA/R06-size batteries  
(used to check  
operation)  
Power cord  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Remove the stand from the TV  
Read the following instructions and then remove the stand from the TV.  
WARNING: The TV is heavy. It should always be carried by at least two people. Attempting to  
carry it by yourself may lead to it being dropped causing injuries and damage.  
Required items: Phillips screwdriver  
1. Remove the screws (A) and remove the cover  
from the stand.  
Cover  
Screw (A)  
2. Remove the screws (B) from the stand.  
Screw (B) Screw (B)  
3. Remove the stand from the TV.  
Stand  
Screw (C)  
4. Remove the screws (C) from the back of the TV.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Models  
Note: Before you connect your TV to another device, please refer to the proper diagrams for  
your specific TV and remote.  
Front  
POWER  
POWER  
POWER button  
INPUT  
MENU  
CHANNEL  
VOLUME  
POWER  
POWER  
VOLUME  
CHANNEL  
MENU  
INPUT  
OPERATE  
S-VIDEO OVER VIDEO  
L/MONO-AUDIO-R  
PC INPUT  
INPUT-4  
Rear  
CENTER  
CHANNEL  
INPUT  
AUDIO  
IN  
AUDIO  
OUT  
R
L
(ANALOG)  
R
L
R
AUDIO  
L
VIDEO  
S-VIDEO  
OVER  
OVER  
INPUT-1  
INPUT-3  
R
AUDIO  
L
VIDEO  
Pr  
Pb  
Y
INPUT-2  
Pr  
Pb  
Y
R
AUDIO  
L
VIDEO  
S-VIDEO  
Underneath  
75Ω (VHF/UHF)  
VIDEO AUDIO  
DIGITAL DIGITAL  
AC 120V  
AV COMPULINK III  
HDMI  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Remote Control  
POWER  
TV CATV VCR DVD  
MULTI SCREEN  
TWIN  
INDEX  
C.C.  
SWAP  
SELECT  
INPUT  
FREEZE  
DISPLAY  
1
4
7
2
3
SLEEP TIMER  
SOUND  
5
6
8
0
9
RETURN+  
TUNE  
VIDEO STATUS  
THEATER PRO  
ASPECT  
LIGHT  
OK  
MUTING  
CH +  
VOL  
+
VOL  
CH –  
MENU  
BACK  
VCR/DVD  
POWER  
VCR CHANNEL  
PREV NEXT  
TV/VCR  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1257G  
TV  
RM-C1257G  
• For information on remote control buttons, see pages 57-65.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Getting Started  
These quick setup pages will provide you, in four easy steps, with the basic information you  
need to begin using your new television right away.  
If you have questions, or for more detailed information on any of these steps, please consult  
other sections of this manual.  
Step 1 – The Remote Control  
Before you can operate your remote control, you  
first need to install the batteries (included).  
Lift and pull the latch on the back of the remote  
control to open. Insert two batteries (included)  
carefully noting the “+” and “–” markings, placing  
the “–” end in the unit first. Snap the cover back  
into place.  
When you change the batteries, try to  
complete the task within three minutes. If you  
take longer than three minutes, the remote  
control codes for your VCR, DVD, and/or  
cable box/satellite receiver may have to be  
reset. See pages 26 - 29.  
Key Feature Buttons  
The four key feature buttons at the center of the remote can be  
MUTING  
OK  
used for basic operation of the television. The top and bottom  
buttons will scan forward and back through the available  
channels. To move rapidly through the channels using  
JVC’s Hyperscan feature, press and hold CH+ or CH–. The  
channels will zip by at a rate of five channels per second. The  
right and left buttons will turn the volume up or down. These  
buttons are also marked with four arrows and are used with  
JVC’s onscreen menu system. To use the onscreen menus,  
press the MENU button.  
CH +  
VOL  
+
VOL  
CH –  
MENU  
BACK  
POWER  
TV CATV V  
V VCR DVD  
Basic Operation  
Turn the television on and off by pressing the POWER button at the top right corner  
of the remote. If this is the first time you are turning on the TV, the interactive  
plug-in menu appears.  
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if  
you need to operate a cable box.  
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to  
DVD to control a DVD player. Please see pages 26 to 29 for instructions on  
programming your remote control to operate a cable box, VCR or DVD player.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Step 2 – Connecting Your Devices  
To make these connections, you will use plugs like the ones illustrated below.  
S-Video Cable  
Component Cables  
Composite Cables  
Audio Cables  
Used to make video  
connections with S-Video  
VCRs, Camcorders and DVD  
players.  
Used to connect audio/video  
devices like VCRs, DVD players,  
stereo amplifiers, game consoles,  
etc.  
Please follow the flow chart below to determine which connection setup is right for you. Then,  
refer to the appropriate diagrams to connect your TV to other devices that you may have. After  
you are finished connecting your devices, plug the power cord into the nearest power outlet  
and turn on the TV.  
A VCR is not necessary for operation of the television. If you follow these diagrams and the  
television does not work properly, contact your local cable operator.  
To connect a DVD player, see Diagram #3. A DVD player is optional.  
• If you have a satellite television system, please refer to the satellite TV manual.  
Do you use a Cable TV Box?  
Yes  
No  
Do you have a VCR?  
Do you have a VCR?  
Yes  
No  
Yes  
No  
Diagram #2 Diagram #1  
Diagram #3 Diagram #1  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Diagram #1  
Cable or Antenna  
Output  
Coaxial Cable  
OR  
75Ω (VHF/UHF)  
OUT  
IN  
TV Underneath Panel  
Cable Box  
Note:  
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of  
the TV.  
Diagram #2  
Cable or Antenna  
Output  
TV Underneath Panel  
TV Rear Panel  
Coaxial Cable  
OVER  
INPUT-3  
AUDIO  
VO  
S-VIDEO  
75Ω (VHF/UHF)  
Two-Way  
Splitter  
OR  
IN  
IN  
OUT  
R
L
V
OUT  
OUT  
IN  
VCR  
Cable Box  
Notes:  
• Use the S-Video connection if possible for superior picture quality.  
Your VCR must be turned on to view premium cable channels.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 1.  
Diagram #3  
Coaxial Cable  
Cable or Antenna  
Output  
Two-Way Splitter  
IN  
DVD Player (OPTIONAL)  
OUT OUT  
Y
P
P
TV Underneath Panel  
Green  
Blue  
75Ω (VHF/UHF)  
B
R
AUDIO OUT  
Red  
OUT  
L
R
R
L
V
IN  
IN  
OUT  
OUT  
R
AUDIO  
L
VIDEO  
INPUT-2  
Pr  
Pb  
Y
VCR  
OR  
TV Rear Panel  
OVER  
INPUT-3  
R
AUDIO  
L
VIDEO  
S-VIDEO  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to JVC AV Compu Link  
JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply  
insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and  
the device will automatically turn on and begin playback. At the same time, using the  
AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on  
and switch to the proper video input.  
• The AV CompuLink cable may be included with the JVC AV CompuLink unit you  
wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or  
• AV CompuLink can only be used with JVC brand products.  
To Connect: Plug one end of the AV compu link cable  
into the AV COMPU LINK INPUT on your VCR, DVD, or  
AV CompuLink Cable  
other compu link device. Plug the other end of the AV  
compu link cable into the AV COMPU LINK at the rear  
of the TV.  
Note:  
• The AV compu link cable has a male 3.5 mm (mono)  
plug on each end.  
VCR  
IN  
VIDEO AUDIO  
DIGITAL DIGITAL  
V L R  
IN  
AV COMPULINK III  
OUT  
HDMI  
OUT  
TV Underneath Panel  
AV CompuLink  
Notes:  
• In order for the VCR playback to begin automatically, the recording tabs must be removed  
from the VHS tape. If the tab is in place, automatic switching will occur when you push the  
VCR’s PLAY button.  
• If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s  
instruction book), using VCR A code will switch the TV to input 1.  
• Refer to your DVD instruction book for detailed connection information.  
To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see  
the receiver connection instructions for detailed connection information.  
• AV CompuLink is compatible with select AV CompuLink receivers.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Camcorder  
You may connect a camcorder, game console or other equipment to your television by using  
the front input jacks (Input 4) located under the front panel door. To access, push on the door  
to open it. You can also connect these using the television’s rear input jacks, using the same  
instructions.  
POWER  
POWER  
VOLUME  
CHANNEL  
MENU  
INPUT  
OPERATE  
S-VIDEO OVER VIDEO  
L/MONO-AUDIO-R  
PC INPUT  
INPUT-4  
CAMCORDER  
OR  
TV front Panel  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.  
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the  
LEFT AUDIO IN on the front of the TV.  
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the  
RIGHT AUDIO IN on the front of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
LEFT AUDIO IN on the front of the TV.  
Connecting to an External Amplifier  
TV Rear Panel  
Speaker  
Speaker  
Amplifier  
AUDIO  
OUT  
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to  
the LEFT AUDIO INPUT on the amplifier.  
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to  
the RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Digital TV Receiver  
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in  
their digital form.  
DTV Decoder  
TV Rear Panel  
DIGITAL OUT  
AUDIO OUT  
CENTER  
CHANNEL  
INPUT  
AUDIO  
IN  
R
L
(ANALOG)  
R
L
VIDEO AUDIO  
DIGITAL DIGITAL  
AV COMPULINK III  
HDMI  
TV Underneath Panel  
HDMI to DVI Cable  
After the connections have been made,  
tighten the screw to secure the cables.  
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to  
the DIGITAL-IN on the back of your television.  
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO  
DIGITAL-IN on the back of your television.  
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO  
DIGITAL-IN on the back of your television.  
• The digital-in terminal is not compatible with the picture signal of a personal computer.  
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television  
with a DTV decoder.  
Notes:  
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance  
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer  
to page 48.)  
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to  
ANALOG. See "DIGITAL-IN AUDIO", page 49.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a HDMI Compatible Device  
By connecting a HDMI compatible device, high definition pictures can be displayed on your  
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI  
compatible device.  
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all  
digital audio/video interface. HDMI provides and interface between any audio/video source,  
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a  
digital television (DTV).  
HDMI Compatible Device  
DIGITAL OUT  
AUDIO OUT  
L
R
VIDEO AUDIO  
DIGITAL DIGITAL  
AV COMPULINK III  
HDMI  
TV Underneath Panel  
HDMI Cable  
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to  
the DIGITAL-IN on the back of your television.  
Note:  
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to  
DIGITAL. See "DIGITAL-IN AUDIO", page 49.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an AV Receiver using your television's  
V1 Smart Input  
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture  
sources from many different devices, without having to change or use the other input  
connections on your TV. This allows you to free up the other input connections so you can  
connect more devices to your television.  
AV Receiver  
MONITOR  
Y
OUT  
P
B
P
R
MONITOR OU
TV Rear Panel  
R
AUDIO  
L
VIDEO  
S-VIDEO  
OVER  
INPUT-1  
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1  
on the back of your TV.  
2) Connect a Yellow Component Cable from the AV Receiver's MONITOR OUT, into the  
VIDEO INPUT-1 on the back of your TV.  
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y  
VIDEO INPUT-1 on the back of your TV.  
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the PR  
VIDEO INPUT-1 on the back of your TV.  
5) Connect a Red Component Cable from the AV Receiver's PB MONITOR OUT, into the PR  
VIDEO INPUT-1 on the back of your TV.  
Notes:  
• Please refer to your AV Receiver instruction manual for more information on connecting your  
speakers and other devices like a DVD player.  
• Use your AV Receiver's remote to switch to the different devices you have connected.  
• Some AV Receiver's may not respond when the V1 Smart Input function is turned on.  
• If you have video connections for each input device connected to your AV Receiver, you  
should not connect them using both S-Video and Composite connection at the same time  
when you are using V1 input as the V1 Smart Input. In this case we recommend using the  
S-Video connection.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to the computer  
This TV can be used as a computer screen. Use a commercially available D-SUB cable to  
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you  
want to listen to the sound from the computer, use a commercially available RCA cable to  
connect the INPUT-4 audio input terminal to the computer's audio output terminal. When the  
sound from the computer is mono, connect to the L/MONO of INPUT-4.  
Notes:  
POWER  
• Refer to your computer manual for a detailed  
POWER  
VOLUME  
CHANNEL  
MENU  
INPUT  
explanation of the connections concerning your  
computer.  
OPERATE  
S-VIDEO OVER VIDEO  
L/MONO-AUDIO-R  
PC INPUT  
INPUT-4  
• Make sure that the connectors are facing the  
correct way when connecting.  
• After connecting, tighten the two screws to fix  
the connectors in place.  
Looking at the images from a computer  
After starting the computer, press the INPUT button to choose INPUT-4. You can listen to the  
sound when the sound from the computer is connected to the INPUT-4 AUDIO input terminal.  
Notes:  
• When the sound from the computer is connected to INPUT-4 by choosing external input  
INPUT-4, the sound from the computer can be listened to, but the images from the computer  
cannot be seen.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Table of signals for each type of computer  
Resolution  
Vertical  
Frequency  
(Hz)  
Horizontal  
Frequency  
(kHz)  
640 x 480  
(VGA)  
60.0  
60.0  
31.5  
42.0  
1024 x 768  
(XGA)  
• Only the above formats are supported.  
• Even with the above formats at 60 Hz, some problems may be experienced depending on  
the quality of the synchronous signal. (Depending on the quality, some pictures may not be  
displayed correctly).  
• Apple Macintosh* computers are not supported.  
When a picture is not displayed  
With some computers, some problems can be solved by changing the settings. Check the  
computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60  
Hz, can not be used with this TV. Refer to the computer's instruction manual.  
*Apple Macintosh is a registered trademark of Apple Computer, Inc.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Step 3 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “AUTO” or “MANUAL” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Notes:  
• The interactive plug-in menu setting does not appear if your TV has been turned on before.  
In this case use the onscreen menus to perform these settings. See pages 42, 55 and 33.  
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.  
Language  
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically  
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three  
languages: English, French (Français) or Spanish (Español).  
LANGUAGE/LANGUE/IDIOMA  
®  
To choose a language:  
(English, Français or Español)  
To NEXT (To set clock)  
ENGLISH  
NEXT  
MENU  
SELECT OPERATE  
EXIT  
(To be continued...)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Clock Set  
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely  
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you  
do not have this in your area, you will have to set the clock manually. See manual clock set  
below. To set the clock using the XDS signal:  
®  
To choose AUTO  
To TIME ZONE  
SET CLOCK  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
MODE  
AUTO  
--: ----  
TIME  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
To move to D.S.T. (Daylight Savings Time)  
NEXT  
®  
To turn D.S.T. ON or OFF  
MENU  
SELECT OPERATE  
EXIT  
To NEXT (To Auto Tuner Setup)  
Notes:  
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.  
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts  
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on  
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in  
October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose  
AUTO, see auto clock set above.  
SET CLOCK  
®  
To choose MANUAL  
To TIME  
MODE  
MANUAL  
®  
To set the hour  
To minute  
TIME  
--: ----  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
®  
To set the minute  
To Start Clock  
START CLOCK  
MENU  
SELECT OPERATE  
EXIT  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(To be continued...)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.  
®  
To choose CABLE or AIR (or SKIP when  
you skip Auto Tuner Setup)  
AUTO TUNER SETUP  
TUNER MODE  
To START  
CABLE  
START  
SELECT OPERATE  
NOW  
PROGRAMMING !  
MENU  
EXIT  
48  
Programming will take approximately 1 to 2  
minutes.  
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your  
quick setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• Noise muting will not work during Auto Tuner Setup.  
• Skip appears only for interactive plug-in menu.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending  
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is  
normal.  
The Quick Setup is complete  
STOP  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Setting the CATV, VCR and DVD Codes  
You can program your remote to operate your cable box, satellite receiver, VCR or DVD  
player by using the instructions and codes listed below. If the equipment does not respond  
to any of the codes listed below or to the code search function, use the remote control  
supplied by the manufacturer.  
Cable Box or Satellite Codes  
The remote control is programmed with cable box and satellite codes for power on/off,  
channel up/down, and 10 key operation.  
1) Find the cable box or satellite brand from the list of codes shown below.  
2) Slide the 2-way selector switch to “CATV”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.  
• If your cable or satellite box does not respond to the first code, try the others listed. If it does  
not respond to any code, try the search codes function, on page 29.  
Cable Box  
ABC  
CODES  
024  
Cable Box  
Puser  
CODES  
032  
Digital  
Satellite  
Systems  
CODES  
Archer  
032, 025  
051, 032  
022, 051  
058, 059  
024, 032, 025  
029  
RCA  
061, 070  
032  
Echostar  
100, 113, 114,  
115  
Cableview  
Citizen  
Realistic  
Regal  
058, 064, 040,  
041, 042, 045,  
068  
Express VU  
G.E.  
100, 113  
Curtis  
106  
Diamond  
Eagle  
Regency  
034  
G.I.  
108  
Rembrandt  
037, 032, 051,  
038  
Gradiente  
Hitachi  
112  
Eastern  
GC Brand  
Gemini  
034  
032, 051  
022, 043  
104, 111  
Samsung  
051  
HNS (Hughes)  
Scientific Atlanta 057, 058, 059  
104  
General Instrument 065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
SLMark  
051, 047  
051, 056  
032, 051  
Panasonic  
Philips  
105  
Sprucer  
Stargate  
102, 103  
023  
Primestar  
108  
Hamlin  
040, 041, 042,  
045, 058, 064  
049, 024  
Telecaption  
Teleview  
Texscan  
Tocom  
067  
Proscan  
RCA  
106, 109, 110  
106, 109, 110  
Hitachi  
Jerrold  
047, 051  
044  
065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
023  
Sony  
107  
035, 036, 066  
050  
Star Choice  
104, 108  
Toshiba  
Unika  
Toshiba  
Uniden  
101  
Macom  
049, 050, 051,  
054  
102, 103  
032, 025  
Universal  
Videoway  
Viewstar  
Zenith  
022, 032  
052  
Magnavox  
033  
030  
Memorex  
Movietime  
029, 030  
063, 046  
046  
032, 051  
039, 037, 048  
Oak  
Panasonic  
055, 056, 060,  
071, 073  
Zenith/Drake  
Satellite  
Paragon  
Philips  
063  
028, 029, 030,  
052, 053, 031,  
069  
Pioneer  
Pulsar  
047, 062  
051, 032  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
VCR Codes  
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,  
rewind, pause, record, channel up/down operation.  
1) Find the VCR brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the VCR.  
• If your VCR does not respond to the first code, try the others listed. If it does not respond to  
any of the codes, try the search codes function on page 29.  
• After you program your remote, some VCR buttons may not work properly. If so, use the  
VCR’s remote.  
To record, hold down the REC button on the remote and press PLAY.  
VCRs  
CODES  
035  
027, 032, 095  
VCRs  
CODES  
VCRs  
CODES  
Admiral  
Aiwa  
Marantz  
Marta  
003, 004, 005  
064  
Samsung  
037, 060, 062,  
033, 089  
Samtron  
Sansui  
089  
Akai  
029, 072, 073, Memorex  
074  
024, 067  
003, 026, 020,  
052  
038, 040, 047,  
048, 041, 042  
MGA  
Audio Dynamic 003, 005  
Sanyo  
Scott  
063, 067, 091,  
071  
Bell & Howell  
Broksonic  
Canon  
063, 071  
020, 026, 094  
023, 025  
043  
Minolta  
058, 045, 093  
Mitsubishi  
038, 040, 047,  
048, 041, 042,  
078, 090  
059, 060, 062,  
067, 038, 040,  
047, 048, 026,  
020  
CCE  
Multitech  
NEC  
047, 027, 062  
Citizen  
064  
003, 004, 005,  
000  
Sears  
063, 064, 065,  
066, 058, 000,  
001  
Craig  
063, 029, 064  
Curtis Mathes  
045, 024, 027,  
093  
Olympic  
024, 023  
Shintom  
Sharp  
075  
Optimus  
028, 021, 035,  
064  
Daewoo  
043, 059, 024,  
092  
035, 036, 080,  
088  
026, 020  
Orion  
DBX  
003, 004, 005  
Panasonic  
023, 024, 021,  
022  
Signature 2000 027, 035  
Dimensia  
Emerson  
045, 093  
Singer  
Sony  
075  
043, 026, 077,  
061, 025, 042,  
020, 076  
Penney  
024, 058, 045,  
063, 003, 004,  
005, 093  
028, 029, 030,  
053, 054, 055  
SV 2000  
Sylvania  
027  
Fisher  
Funai  
063, 066, 067,  
065, 071, 091  
Pentax  
Philco  
058, 005, 045,  
093  
031, 023, 024,  
027  
027, 026, 020,  
000  
031, 024, 027,  
023, 026, 020,  
043  
Symphonic  
Tashiro  
Tatung  
027, 081  
064  
033, 045, 024  
G.E.  
Philips  
031, 023, 024,  
086  
003, 004, 005  
Go Video  
037, 051, 049,  
050, 089  
Teac  
003, 004, 027,  
005  
Pioneer  
Proscan  
023  
Goldstar  
064  
045, 058, 023,  
024, 031, 046,  
059, 060, 033,  
087, 093  
Technics  
021, 022, 023,  
024  
Gradiente  
083, 084, 081,  
000, 001  
Teknika  
Toshiba  
024, 027, 070  
059, 046, 079  
Hitachi  
023, 045, 058,  
027, 081, 093  
Quasar  
021, 022, 023,  
024  
Vector Research 005  
Instant Replay 024, 023  
Wards  
Yamaha  
Zenith  
035, 036, 067,  
044, 064  
Radio Shack  
033, 024, 063,  
036, 067, 040,  
027  
Jensen  
JVC  
003  
000, 001, 002,  
003, 004, 005  
063, 003, 004,  
005  
033, 045, 058,  
023, 024, 031,  
046, 059, 060,  
083, 084, 085,  
087, 093  
RCA  
Kenwood  
LXI  
003, 004, 064,  
005  
044, 082, 064,  
094  
027, 064, 058,  
065, 066, 063,  
067  
Realistic  
024, 063, 036,  
067, 040, 027  
Magnavox  
031, 023, 024,  
086  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
DVD Codes  
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,  
rewind, previous/next chapter, tray open/close, and still/pause operation.  
1) Find the DVD player brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the DVD player.  
• If your DVD player does not respond to the first code, try the others listed. If it does not  
respond to any of the codes, try the search codes function on page 29.  
• After you program your remote, some DVD buttons may not work properly. If so, use the  
DVD player’s remote.  
DVD Player  
Aiwa  
CODES  
043  
DVD Player  
RCA  
CODES  
021, 026  
Apex  
040  
Sampo  
Samsung  
Sharp  
034  
030  
028  
038  
Denon  
Hitachi  
JVC  
020, 037  
030, 031  
000  
Silvania  
Sony  
Kenwood  
Konka  
035  
024, 045, 046,  
047  
039  
Mitsubishi  
Onkyo  
Oritron  
Panasonic  
Philips  
Pioneer  
Raite  
025  
Technics  
Toshiba  
Vialta  
020  
041  
023  
044  
050  
020  
Wave  
042  
023, 036  
022  
Yamaha  
Zenith  
020  
027, 032  
033  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Search Codes  
Cable/Satellite Search Codes Function  
1) Slide the first 2-Way Mode Selector switch to CATV.  
2) Press the POWER and RETURN+ buttons. Hold for at least three seconds and release.  
3) Press the POWER button on the remote, and see if the cable or satellite box responds.  
4) If there was a response, press RETURN+. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use  
the remote control that came with your equipment.  
5) Press RETURN+ to exit.  
VCR/DVD Search Codes Function  
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or  
“DVD”.  
2) Press the VCR or DVD POWER and RETURN+ buttons. Hold for at least three seconds and  
release.  
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.  
4) If there was a response, press RETURN+. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for  
the DVD player), and there is no response, use the remote control that came with your  
equipment.  
5) Press RETURN+ to exit.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–  
buttons let you:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
• Scan through TV channels (when not in a menu screen)  
® Left and right arrows mean press the VOLUME+ or VOLUME- buttons to move left or right  
to:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
• Turn the volume up or down (when not in a menu screen)  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping arrow” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The item that  
appears in green is the one currently selected. If you use the Menu button on the TV’s front  
panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and  
ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in  
menu” will appear the first time the TV is plugged in.  
INITIAL SETUP  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
SET LOCK CODE  
OFF  
AUTO DEMO  
NEXT PAGE  
(4/4)  
MENU  
SELECT OPERATE  
EXIT  
Note:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. Examples of the onscreen  
menus are shown on the next page. Detailed explanations on using each menu follow later in  
this guide. For information about the interactive plug-in Menu, see pages 23 - 25.  
The Onscreen Menu System  
To open the onscreen menu system, press the MENU button on the remote control. You  
navigate within the onscreen menus by using the four directional arrow buttons on the remote  
control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions  
will not operate when the onscreen menu is active).  
The selected feature and option on a menu screen are highlighted in a different color.  
Selected Option  
(Green)  
ENG. FRAN. ESP.  
LANGUAGE  
Selected Option  
(Blue)  
CLOSED CAPTION  
To move to a different feature use the πarrows to move up or down the list. When you  
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen  
will appear. Use the arrows ® to select an option from the highlighted feature. Pressing  
MENU on the remote control will close the onscreen menu system and return you to normal  
television viewing.  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
• If you do not press any buttons for a few seconds, the onscreen menu will automatically  
shut off.  
• Button names in this guide are shown in SMALL CAPITAL LETTERS.  
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.  
• Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
INITIAL SETUP  
INITIAL SETUP  
PREVIOUS  
PREVIOUS  
IMAGE SHIFT  
LANGUAGE  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
SET LOCK CODE  
AUTO DEMO  
OFF  
NEXT PAGE  
(3/4)  
NEXT PAGE  
(4/4)  
MENU  
SELECT OPERATE  
EXIT  
MENU  
SELECT OPERATE  
EXIT  
INITIAL SETUP 03  
INITIAL SETUP 04  
PICTURE ADJUST  
PREVIOUS  
INITIAL SETUP  
PREVIOUS  
STANDARD  
NOISE MUTING  
ON  
OFF  
ON  
TINT  
00  
00  
00  
00  
00  
FRONT PANEL LOCK  
V1 SMART INPUT  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
LOW  
(2/4)  
COLOR TEMPERATURE  
NEXT PAGE  
HIGH  
NEXT PAGE  
(1/2)  
EXIT  
MENU  
MENU  
SELECT OPERATE  
SELECT OPERATE  
EXIT  
PICTURE ADJUST 01  
INITIAL SETUP 02  
INITIAL SETUP  
PICTURE ADJUST  
PREVIOUS  
TV SPEAKER  
AUDIO OUT  
DIGITAL-IN  
PREVIOUS  
STANDARD  
ON  
VARI  
DIG. NOISE CLEAR  
NATURAL CINEMA  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
OFF  
AUTO  
ON  
SIZE1  
DIGITAL  
ON  
DIGITAL-IN AUDIO  
CENTER CH INPUT  
ON  
BURN-IN IMAGE REDUCER  
RESET  
NEXT PAGE  
(1/4)  
NEXT PAGE  
(2/2)  
MENU  
MENU  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
PICTURE ADJUST 02  
INITIAL SETUP 01  
SOUND ADJUST  
/
CLOCK TIMERS  
PREVIOUS  
SET CLOCK  
PREVIOUS  
BASS  
00  
00  
00  
TREBLE  
BALANCE  
MTS  
/
ON OFF TIMER  
STEREO SAP MONO  
RESET  
NEXT PAGE  
NEXT PAGE  
MENU  
MENU  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
SOUND ADJUST  
Notes:  
CLOCK/TIMERS  
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the  
digital-in terminal and the picture is being displayed on the screen.  
• When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu  
between INITIAL SETUP 04 and PICTURE ADJUST 01 will appear.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
Press the MENU button  
AUTO TUNER SETUP  
π†  
®  
®  
To AUTO TUNER SETUP  
To operate  
TUNER MODE  
CABLE  
To choose CABLE or AIR  
Press the OK button to start  
OK  
PRESS TO START  
MENU  
SELECT OPERATE  
EXIT  
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the  
message PROGRAMMING OVER! appears onscreen.  
Press the Menu button when finished  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV. You  
can add or delete channels from the line-up or set the channel label as you like or prevent any  
unauthorized viewers from watching any or all 181 channels.  
Press the MENU button  
CHANNEL SUMMARY  
π†  
To CHANNEL SUMMARY  
To operate  
CHNO. SCAN  
ID  
CHNO. SCAN  
ID  
01  
06  
HBO  
®  
02  
03  
04  
05  
MTV  
07  
08  
09  
10  
L
The Channel summary screen will now be displayed with  
the channels set to scan marked with an “”. You can  
delete channels from the scan by removing the “”. If any  
channels were missed during auto tuner setup and you  
wish to add them, you may by placing an “” next to the  
channel number.  
A&E  
E!  
OK  
MENU  
SELECT  
OPERATE  
EXIT  
π® To the SCAN column  
Press the OK button to include or delete from scan  
Press the MENU button when finished  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
How to set the channel label.  
Press the MENU button  
ID  
π†  
®  
π†  
To CHANNEL SUMMARY  
To operate  
To the ID column  
CHANNEL 09  
RETURN  
Press the OK button to enter  
OK  
PRESS TO FINISH  
®  
π†  
To select the character you want  
To move to the next space  
MENU  
SELECT OPERATE  
EXIT  
...continue to follow these directions for all four  
spaces  
Press the OK button to finish  
Your characters are now set  
Press the MENU button when finished  
If you want to reset the characters you set:  
Press the MENU button  
π†  
®  
π†  
To CHANNEL SUMMARY  
To enter  
To select RESET  
Press the OK button to finish  
Your characters are now reset  
Notes:  
You can use characters for: Alphabet, numbers, marks and spaces.  
• It is possible to set the maximum of 40 channel labels.  
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will  
appear.  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
To CHANNEL SUMMARY  
To operate  
®  
π® To the Lock Column (  
)
Press the ZERO button to lock or unlock that channel  
Press the MENU button when finished  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
THIS CHANNEL IS LOCKED BY  
CHANNEL GUARD.  
Lock Code using the 10 key pad.  
If the wrong code is entered, the message  
“INVALID LOCK CODE!” will flash on the screen.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
The channel cannot be accessed until the correct code  
is entered.  
NO. - - - -  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”, page 41.  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 36 for information on  
how to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings (for programming broadcast from the United States), Canadian  
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use  
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting  
each of the three V-Chip formats appear in the next six pages along with descriptions of the  
rating categories.  
To access the rating categories:  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
To operate (Lock icon  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
will appear)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
To turn V-Chip ON or OFF (V-Chip must be  
turned ON for rating settings to operate)  
π†  
To move to SET US TV RATINGS,  
SET MOVIE RATINGS, or  
MENU  
SELECT OPERATE  
EXIT  
SET CANADIAN RATINGS (see following  
pages for descriptions of each item)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to BLOCK.  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
V-CHIP  
OFF  
V-CHIP  
π†  
To V-CHIP  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
®  
To operate (The lock icon  
appears)  
Press ZERO to access V-Chip setup options  
VIEW  
π†  
To UNRATED  
®  
To VIEW or BLOCK  
MENU  
SELECT OPERATE  
EXIT  
Press MENU when done  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be able  
to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or no  
violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
To operate (lock icon  
appears)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
π†  
®  
To turn V-Chip ON or OFF  
To move to SET US TV RATINGS  
To operate  
MENU  
SELECT OPERATE  
EXIT  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the πor ® to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the  
icon appears instead of a “—”.  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
SET US TV RATINGS  
π® To the TV 14 Column  
TV TV  
MA 14  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
Press the OK button to lock  
Press the MENU button when finished  
V/FV  
S
L
Note:  
D
• If you want to change the setup, move the cursor to  
the top column and change the lock icon to “—” by  
pressing OK again. You may then select individual  
categories to block.  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur producers  
who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating may  
include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (Lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET MOVIE RATINGS  
To enter movies menu  
For example:  
To block viewing of X and NC-17 rated from shows:  
SET MOVIE RATINGS  
π® To the X Column  
Press the OK button to lock  
π® To the NC-17 Column  
Press the OK button to lock  
Press the MENU button to finish  
N
P
G13  
X
C17  
R
PG  
G
NR  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and  
early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET CANADIAN RATINGS ENG (for English)  
To enter ratings menu  
For example:  
To block viewing of programming rated 14+ and 18+:  
SET CANADIAN RATINGS ENG  
®  
To the 18+ Column  
Press the OK button to lock  
P
C
8
G
C
18+  
14+  
G
®  
To the 14+ Column  
Press the OK button to lock  
Press the MENU button to finish  
MENU  
OK  
EXIT  
SELECT  
OPERATE  
Note:  
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 40 in the  
French side of this user’s guide.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.  
To change the lock code, follow the steps below.  
Press the MENU button  
SET LOCK CODE  
π†  
To SET LOCK CODE  
To operate (lock icon  
LOCK CODE  
0000  
®  
appears)  
Press ZERO to access the lock code  
The first digit will be highlighted  
OK  
PRESS  
TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
®  
π†  
To select the number  
To move to the next digit  
Continue to follow these directions for all four numbers  
Press the OK button to finish (your lock code is now set)  
Press the Menu button when finished  
When a viewer attempts to watch a blocked channel, this message appears:  
THIS PROGRAMMING EXCEEDS  
YOUR RATING LIMITS.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
The channel will remain blocked until the correct lock code is entered (see above for  
information on setting your lock code).  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Demo  
This function lets you preview the Dynamic Gamma demo.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
π†  
®  
To AUTO DEMO  
To turn AUTO DEMO ON or OFF  
SET LOCK CODE  
AUTO DEMO  
Notes:  
OFF  
• Auto demo starts 2 seconds after it is set to ON.  
NEXT PAGE  
(4/4)  
• To stop auto demo, press the MENU button, and  
select auto demo by pressing the πbuttons,  
and turn it off by pressing the ® buttons. Press  
the BACK button to finish.  
MENU  
SELECT OPERATE  
EXIT  
Image Shift  
The picture displayed on the screen is shifted up, down and to the left and right at regular  
intervals. In order to prevent burn-in, set this function to FAST or STANDARD.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To IMAGE SHIFT  
To enter  
IMAGE SHIFT  
LANGUAGE  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
π†  
To select the mode “STD (STANDARD)”,  
“FAST” or “OFF”  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/4)  
MENU  
SELECT OPERATE  
EXIT  
OFF: IMAGE SHIFT is turned off.  
STD: The picture is shifted every 30 minutes.  
FAST: The picture is shifted every 10 minutes.  
Language  
The language function is described on page 23 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Press the Menu button  
INITIAL SETUP  
PREVIOUS  
π†  
To LANGUAGE  
IMAGE SHIFT  
LANGUAGE  
®  
To choose a language: ENG. (English), FRAN.  
(French) or ESP. (Spanish)  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/4)  
MENU  
SELECT OPERATE  
EXIT  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below.  
Press the MENU button  
CLOSED CAPTION  
π†  
®  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To enter  
MODE  
TEXT  
CC1  
T1  
CAPTION  
TEXT  
To MODE  
To select CAPTION, TEXT in MODE  
To CAPTION or TEXT  
OK  
PRESS TO FINISH  
To select a caption (CC1 to CC4) or text  
channel  
MENU  
SELECT OPERATE  
EXIT  
(T1 to T4)  
Press the OK button to save  
Press the MENU button when finished  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel T1. The other  
channels are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 62.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
IMAGE SHIFT  
π†  
®  
To AUTO SHUT OFF  
To turn ON or OFF  
LANGUAGE  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
• If the channel that you have on does not receive a  
signal for more than one minute, the blinking text  
“NOT RECEIVING A SIGNAL” appears on the screen,  
and starts the countdown. If no signal is being  
received within 10 minutes, the TV shuts itself off.  
NEXT PAGE  
(3/4)  
MENU  
SELECT OPERATE  
EXIT  
XDS ID  
XDS ID Display provides a channel’s call letters, the network’s name, and even a program  
name. The XDS ID information is provided by the broadcaster.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To XDS ID  
To turn ON or OFF  
IMAGE SHIFT  
LANGUAGE  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
Press the MENU button when finished  
OFF  
ON  
NEXT PAGE  
(3/4)  
MENU  
SELECT OPERATE  
EXIT  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Noise Muting  
This feature inserts a blank grey screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To NOISE MUTING  
To turn noise muting ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Press the MENU button when finished  
LOW  
NEXT PAGE  
(2/4)  
Note:  
MENU  
SELECT OPERATE  
EXIT  
• Noise muting will not work during auto tuner setup or  
when you operate channel summary.  
Front Panel Lock  
This allows you to lock the keys on the front of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To FRONT PANEL LOCK  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
You can turn off this feature in the following ways:  
LOW  
(2/4)  
NEXT PAGE  
• Unplug the power cord, and plug it back in. Do this if  
your batteries die, or you lose your remote control.  
MENU  
SELECT OPERATE  
EXIT  
• Use the remote control.  
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD  
for FRONT PANEL LOCK will appear.  
Note:  
To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will  
remain ON.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
V1 Smart Input  
This feature is used if you have connected an AV Receiver to your television. By turning this  
feature on, your television can automatically detect the signal source from your components  
that are connected to your AV Receiver.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To V1 SMART INPUT  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
LOW  
Notes:  
NEXT PAGE  
(2/4)  
• If you do not have an AV Receiver connected to your  
television, turn this feature OFF. By doing so, you can  
take advantage of using AV CompuLink components  
with your television.  
MENU  
SELECT OPERATE  
EXIT  
• Some AV Receivers may not work with this function.  
Video Input Label  
This function is used to label video input connections for the onscreen displays.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
π†  
®  
To VIDEO INPUT LABEL  
To operate  
NOISE MUTING  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
OFF  
ON  
To select the desired video input  
LOW  
To select the desired preset input label (see  
chart below)  
NEXT PAGE  
(2/4)  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
VIDEO INPUT LABEL  
Press the MENU button when finished  
VCR  
VIDEO-1  
VIDEO-2  
VIDEO-3  
VIDEO-4  
DIGITAL-IN  
DVD  
SAT  
GAME  
STB  
Preset  
Labels  
Select when...  
OK  
PRESS TO FINISH  
You have a VCR connected to the video input  
VCR  
MENU  
SELECT OPERATE  
EXIT  
You have a DVD connected to the video input  
DVD  
You have a Digital VCR connected to the video input  
You have a Set-top Box connected to the video input  
You have a Satellite Receiver connected to the video input  
You have an Amplifier connected to the video input  
You have a Video Game connected to the video input  
You have a Video Camera connected to the video input  
You have a Video Disc player connected to the video input  
D-VHS  
STB  
SAT  
AMP  
GAME  
CAM  
DISC  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically  
when the aspect is set to panorama, cinema, or full.  
Press the MENU button  
π†  
®  
To POSITION ADJUSTMENT  
To enter  
π® To adjust the position  
Press the MENU button to finish  
Notes:  
OK  
MENU  
RESET  
EXIT  
OPERATE  
To reset the adjustment to the center, press the  
OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at it’s  
maximum limit.  
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically and horizontally when  
the aspect is set HD panorama or cinema zoom for 1080i and 720p signals.  
Power Indicator  
Power indicator allows you to adjust the brightness of  
INITIAL SETUP  
the power indicator  
PREVIOUS  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
πTo POWER INDICATOR  
®  
To adjust POWER INDICATOR LOW, HIGH  
or OFF  
LOW  
NEXT PAGE  
(2/4)  
MENU  
SELECT OPERATE  
EXIT  
TV Speaker  
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the  
audio through your stereo.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
ON  
π†  
®  
To TV SPEAKER  
To turn the TV’s speakers ON or OFF  
TV SPEAKER  
VARI  
SIZE1  
DIGITAL  
ON  
AUDIO OUT  
DIGITAL-IN  
DIGITAL-IN AUDIO  
CENTER CH INPUT  
Press the MENU button when finished  
NEXT PAGE  
(1/4)  
Notes:  
MENU  
SELECT OPERATE  
EXIT  
• Before you turn the TV speaker setting from OFF  
to ON, make sure that the TV volume level is low! If the TV volume is set too high, the  
sound level will be extremely loud.  
• After a power interruption, the TV speaker settings will return to “ON”.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Audio Out  
If your television is connected to an external speaker source, audio out gives you the option of  
controlling the volume level with your TV’s remote control.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
To AUDIO OUT  
To VARI or FIX  
ON  
VARI  
TV SPEAKER  
AUDIO OUT  
®  
SIZE1  
DIGITAL  
ON  
DIGITAL-IN  
DIGITAL-IN AUDIO  
CENTER CH INPUT  
Press the MENU button when finished  
VARI: Lets you adjust the volume of the external  
speakers using the VOLUME+/– buttons on your TV’s  
remote control.  
NEXT PAGE  
(1/4)  
MENU  
SELECT OPERATE  
EXIT  
FIX: The volume of the external speakers is adjusted  
using the audio device’s remote control.  
Digital-In  
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture  
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p  
picture signal is being displayed on the screen. There are two types of 480p picture signals:  
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted  
by selecting either SIZE1 or SIZE2.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
ON  
VARI  
TV SPEAKER  
πTo DIGITAL-IN  
AUDIO OUT  
SIZE1  
DIGITAL  
ON  
DIGITAL-IN  
® To enter  
DIGITAL-IN AUDIO  
CENTER CH INPUT  
® To select SIZE1 or SIZE2  
Press the MENU button to finish  
NEXT PAGE  
(1/4)  
MENU  
SELECT OPERATE  
EXIT  
Note:  
The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the  
Digital-In terminal and the picture is being displayed on the screen.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Digital-In Audio  
This feature is used if you have a DTV or HDMI  
compatible component connected to your TV.  
INITIAL SETUP  
PREVIOUS  
ON  
VARI  
TV SPEAKER  
Press the MENU button  
AUDIO OUT  
SIZE1  
DIGITAL  
ON  
DIGITAL-IN  
π†  
To DIGITAL-IN AUDIO  
DIGITAL-IN AUDIO  
CENTER CH INPUT  
®  
To select “ANALOG” or “DIGITAL”  
Press the Menu button when nished  
NEXT PAGE  
(1/4)  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If  
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.  
• Refer to your DTV or HDMI component’s instruction manual for more information.  
Center CH Input  
When you are using a surround system, you can substitute the speaker of this television for  
the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the  
speaker as the center speaker of your surround system. It is possible to lock the volume when  
it is ON separately from the volume when it is OFF.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
ON  
VARI  
TV SPEAKER  
π†  
®  
To CENTER CH INPUT  
To adjust CENTER CH INPUT to “ON” or “OFF”  
AUDIO OUT  
SIZE1  
DIGITAL  
ON  
DIGITAL-IN  
DIGITAL-IN AUDIO  
CENTER CH INPUT  
Press the MENU button when finished  
NEXT PAGE  
(1/4)  
MENU  
SELECT OPERATE  
EXIT  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
TINT  
Tint allows you to adjust the levels of red and green in your TV picture.  
COLOR  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
PICTURE  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
BRIGHT  
You can adjust the overall brightness of the TV picture with the Bright control.  
DETAIL  
The Detail feature adjusts the level of fine detail displayed in the picture.  
Adjust the Picture Settings  
Press the MENU button  
PICTURE ADJUST  
π†  
To TINT, COLOR, PICTURE, BRIGHT or  
DETAIL  
To enter  
PREVIOUS  
TINT  
STANDARD  
00  
00  
00  
00  
00  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
®  
+02  
TINT  
COLOR TEMPERATURE  
NEXT PAGE  
HIGH  
(1/2)  
EXIT  
®  
π†  
To adjust the setting  
To move to the next setting  
MENU  
SELECT OPERATE  
Press the MENU button when finished  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
TINT  
STANDARD  
π†  
®  
To COLOR TEMPERATURE  
To enter  
00  
00  
00  
00  
00  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
COLOR TEMPERATURE LOW HIGH  
®  
To set LOW or HIGH  
COLOR TEMPERATURE  
NEXT PAGE  
HIGH  
Press the MENU button when finished  
(1/2)  
EXIT  
MENU  
SELECT OPERATE  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Digital Noise Clear  
With digital noise clear, this helps take our static or noise from a channel that may not be  
coming in clearly.  
Press the MENU button  
DIG. NOISE CLEAR  
OFF  
LOW  
HIGH  
π†  
®  
π†  
To DIG. NOISE CLEAR  
To enter  
To select the mode “LOW”, “HIGH” or “OFF”  
Press the MENU button when finished  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a program  
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges  
of these programs, choose NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct  
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the  
television rate of 30 frames-per-second.  
NATURAL CINEMA  
Press the MENU button  
AUTO  
π†  
®  
π†  
To NATURAL CINEMA  
To enter  
To select the mode “AUTO", "ON" or "OFF”  
ON  
OFF  
Press the MENU button when finished  
Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:  
• Turning on or off  
• Changing the channel or input mode  
• Using multi-screen functions  
Color Management  
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated  
to produce natural hues.  
Press the MENU button  
COLOR MANAGEMENT  
ON  
π†  
®  
π†  
To COLOR MANAGEMENT  
To enter  
To select the mode “ON" or "OFF"  
OFF  
Press the MENU button when finished  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Dynamic Gamma  
JVC's Dynamic Gamma Circuitry (DGC) makes it easier to see dark areas when a picture  
has many dark areas, and makes it easier to see the bright areas when a picture has many  
bright areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness  
balance, especially in dark areas where the level of greyscale is often lost, turning completely  
to black. DGC automatically enhances the detail in these dark areas providing a more dynamic  
image with ner detail, so the optimum picture settings are automatically set for each picture.  
Normally use with DGC on.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
π†  
®  
To DYNAMIC GAMMA  
To turn ON or OFF  
DIG. NOISE CLEAR  
NATURAL CINEMA  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
OFF  
AUTO  
ON  
Press the MENU button when finished  
ON  
BURN-IN IMAGE REDUCER  
RESET  
NEXT PAGE  
(2/2)  
MENU  
SELECT OPERATE  
EXIT  
Burn-in Image Reducer  
When burn-in is minimal, burn-in and residual images may be softened with the BURN-IN  
IMAGE REDUCER function.  
Press the MENU button  
π†  
®  
To BURN-IN IMAGE REDUCER  
To enter  
REDUCING BURN-IN.  
PLEASE WAIT  
Burn-in will be reduced by displaying snow on the screen for approximately 55 seconds, and  
white for approximately 5 seconds in sequence. Leave the television in this state for some time  
(more than a few hours).  
Press the MENU button to bring back to the normal screen.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Reset  
Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig.  
noise clear, color management and dynamic gamma) at once to the default settings.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
π†  
®  
To RESET  
To enter  
DIG. NOISE CLEAR  
NATURAL CINEMA  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
OFF  
AUTO  
ON  
The onscreen menu disappears for a moment,  
and then the settings are reset to the default  
setting for all the picture adjustments.  
ON  
BURN-IN IMAGE REDUCER  
RESET  
NEXT PAGE  
(2/2)  
Press the MENU button when finished  
MENU  
SELECT OPERATE  
EXIT  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the  
balance setting.  
Adjust the Sound Settings  
Press the MENU button  
SOUND ADJUST  
PREVIOUS  
π†  
®  
π†  
To BASS, TREBLE or BALANCE  
To adjust the setting  
To move to the next setting  
BASS  
00  
00  
00  
TREBLE  
BALANCE  
MTS  
STEREO SAP MONO  
Press the MENU button when finished  
RESET  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
Note:  
You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as  
the default setting when you select reset. See page 51.  
You can adjust BALANCE only when A.H.S. is off. See page 60.  
MTS (Multi-Channel Television Sound)  
MTS technology allows several audio signals to be broadcast at once, giving you a choice  
in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP).  
Press the MENU button  
SOUND ADJUST  
PREVIOUS  
π†  
To MTS  
BASS  
00  
00  
00  
®  
Select the mode  
TREBLE  
BALANCE  
MTS  
(The ON AIR arrow tells you if a broadcast is in stereo  
and/or contains an SAP).  
STEREO SAP MONO  
RESET  
Press the MENU button when finished  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
• MTS unavailable if your television’s input source is in input 1, 2, 3 or 4 mode, as described  
on page 59.  
Reset  
Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.  
See page 53 on how to use reset.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
Set Clock  
The set clock function is described on page 24 as the interactive plug-in menu. You can choose  
to set the clock automatically, or manually. If you need to set the clock again, follow the steps  
below.  
Press the MENU button  
π†  
To SET CLOCK  
To operate  
®  
When you set the clock automatically, choose AUTO by pressing the  
or  
®
arrows.  
π†  
To TIME ZONE  
SET CLOCK  
®  
To select your time zone  
ATLANTIC  
CENTRAL  
EASTERN  
HAWAII  
MOUNTAIN  
MODE  
AUTO  
--: ----  
ALASKA  
PACIFIC  
TIME  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
π†  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
Press OK to finish  
®  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
Press the MENU button when finished  
When you set the clock manually, choose MANUAL by pressing the  
or  
®
arrows.  
π†  
®  
π†  
®  
To move to the hour  
To set the hour  
SET CLOCK  
To move to minutes  
To set the minutes  
Press OK to start clock  
MODE  
MANUAL  
--: ----  
TIME  
TIME ZONE  
D.S.T.  
ATLANTIC  
ON  
OK  
PRESS TO START CLOCK  
MENU  
SELECT OPERATE  
EXIT  
THANK YOU !!  
Press the MENU button when finished  
Notes:  
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.  
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts  
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on  
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in  
October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Press the MENU button  
ON/OFF TIMER  
7:00 PM  
10:00 PM  
03  
ON TIME  
π†  
®  
®  
To ON/OFF TIMER  
OFF TIME  
CHANNEL  
ON VOLUME  
MODE  
To operate (begins with ON TIME)  
CURRENT  
EVERYDAY  
NO  
To set the hour (AM/PM) you want the TV to  
turn on  
ON/OFF TIMER  
®  
To move to minutes  
To set the minutes  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the  
OFF TIME the same way as ON TIME  
®  
To accept OFF TIME and move to CHANNEL  
To select channel  
To ON VOLUME  
®  
To set the volume level  
To move to MODE  
®  
Choose ONCE or EVERYDAY  
To ON/OFF TIMER  
®  
Choose YES to accept the timer setting, choose NO if you don’t wish to accept  
Press the OK button to finish  
Press the MENU button to exit the menu  
Notes:  
• The on/off time cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Multi Screen Function  
Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).  
Note: After you press any multiscreen button, if you press the menu button, only the picture  
adjust screen will appear.  
Index  
This allows you to quickly look at up to 12 channels at a time so that you can decide which one  
to watch.  
1
5
9
2
3
4
6
7
8
10  
11  
12  
Notes:  
• Only RF input signal will be displayed.  
You can watch the channel added in channel summary. See page 33.  
Twin  
Activate the split-screen option by pressing Twin on  
the remote control. The channel (or input) you were  
watching before pressing Twin will appear on the left,  
07  
V-1  
the new channel will appear on the right. The sound  
will continue to come from the main screen channel  
MAIN SCREEN  
PICTURE  
SPLIT SCREEN  
PICTURE  
(or input). To turn split-screen off and return to  
normal television viewing, press TWIN again or press  
the BACK button.  
Notes:  
• If the signal that you are watching is coming from the HDMI input, you cannot enter the  
TWIN mode  
• Main Screen and Split Screen will not display the same channel or input at the same time.  
You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.  
• Split-screen functions will not work with locked channels or channels blocked by V-Chip  
ratings limits. A grey screen will display instead.  
• With split screen, the picture from the component terminal and DIGITAL-IN terminal will  
not be displayed.  
• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of  
480p from the component terminal and DIGITAL-IN terminal.  
• After you press the Select button, and select SPLIT SCREEN when you press the  
OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will  
be automatically selected about 8 seconds later.  
• Aspect does not work in Twin mode.  
• When you press the MENU button in Twin mode, it appears only as Picture Adjust menu.  
• When it is PC output, Main and Split screen will not be displayed.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Freeze  
Pressing the FREEZE button causes the screen to change to the split-screen display with the still  
picture displayed on the right. In order to return to the normal display, press the FREEZE button  
once again.  
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this  
function will cancel out.  
Swap  
You can exchange the channel (or input) displayed in the split screen window for the main  
screen image by pressing the SWAP button.  
Select  
With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you  
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT  
will shift the channel.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 12:  
0 (ZERO)  
1 (ONE)  
2 (TWO)  
Tune  
Lets you decide the input channel and select it. After you press the number buttons on the  
remote, press the TUNE button. For example, to move to channel 12:  
1 (ONE)  
2 (TWO)  
Press the TUNE button  
Input  
Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGITAL-IN for video  
devices like VCR’s DVD players, or camcorders.  
Press the INPUT button  
By every press of the INPUT button, you can change the input mode.  
Notes:  
• When you return to TV mode, press the RETURN+ button or direct 10 key pad.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the front of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose  
INPUT by pressing Menu  
on the front panel and choose a mode by using the CHANNEL+/-  
buttons ( OPERATE ).  
®
• If you have a PC connected to the TV, select INPUT 4.  
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to receive.  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Return +  
The Return+ button has two functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CH– buttons.  
RETURN+ and hold for three seconds  
RETURN CHANNEL  
PROGRAMMED!  
The channel currently active has been programmed as your return+ channel. Now scan  
through the channels using the CHANNEL+/- buttons.  
RETURN+  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The  
message “RETURN CHANNEL CANCELLED!” will appear.  
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel  
return+.  
Sound  
Note: Smart Sound: PD-42V485 Only.  
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) mode,  
BBE, and SMART SOUND on or off.  
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more  
effect.  
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility  
and musical realism.  
SMART SOUND - Decreases high sound levels, giving a regulated sound level.  
Press the SOUND button  
SOUND EFFECT  
π†  
®  
To select A.H.S., BBE or SMART SOUND  
To choose the setting  
A.H.S.  
MOVIE MUSIC OFF  
ON OFF  
BBE  
SMART SOUND  
ON OFF  
Press the MENU when finished  
MENU  
OPERATE  
EXIT  
SELECT  
Note: Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound,  
Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered  
trademarks of BBE Sound, Inc.  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Video Status  
The Video Status button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
Standard - Resets the picture display to the factory settings.  
VIDEO STATUS  
Dynamic - Gives a vivid picture with better contrast when viewing in  
STANDARD  
a brightly lit room.  
DYNAMIC  
Theater - Gives a rich, film-like look to video when viewing in a  
THEATER  
dimly lit room.  
GAME  
Game - Used for when you are playing video games connected to  
your TV.  
Press the VIDEO STATUS button  
By every press of the VIDEO STATUS button, you change the mode.  
Note:  
You can also change the mode by pressing the πbuttons.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the front of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose  
VIDEO STATUS by pressing Menu  
on the front panel and choose a mode by using the  
CHANNEL+/- buttons ( OPERATE  
® ).  
TheaterPro D6500K  
The TheaterPro D6500K color temperature technology function makes sure that the video you  
watch is set to the standard color temperature, so that what you see is as true to what the film  
to video editors intended it to be.  
Press the THEATERPRO button  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals  
of 15 minutes, for a total time of up to 180 minutes.  
Press the SLEEP TIMER button  
0 15 30 45 60 75 90 105 120 135 150 165 180  
Sleep Timer Message  
20 seconds before the automatic shutoff, this message will appear:  
GOOD NIGHT!!  
PUSH SLEEP TIMER BUTTON  
TO EXTEND  
You then have 20 seconds to press the SLEEP TIMER button to  
delay the shut off for another 15 minutes.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Display  
The display screen shows the current status of timers, inputs, and XDS ID.  
Press the DISPLAY button  
The screen to the right shows the following information:  
05 KLVX PBS  
• The current channel or AV input (Channel 05)  
JAZZ FESTIVAL  
• The current time (12:20 pm)  
• Sleep timer status/minutes remaining (The Sleep Timer  
is off)  
NOW  
12:20 PM  
OFF  
SLEEP TIMER  
ON/OFF TIMER  
EVERYDAY  
7:00 PM  
• On/off timer status (Set to turn on everyday at 7:00 PM,  
ON TIME  
off at 10:00 PM)  
OFF TIME  
10:00 PM  
• Each Press of the DISPLAY button changes the display  
mode:  
Display  
Time  
Channel  
Off  
Display - Full screen shown above  
Time - Shows the current time only  
Channel - Shows the current channel  
Off - Turns display off  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock, sleep timer or on/off timer are not set, the display screen will show:  
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
PD-42V485 ONLY  
OFF  
SMART CAPTION  
ON  
PD-42V475 ONLY  
OFF  
ON  
• Smart Caption will appear when you press the Muting button, only on channels where the  
broadcast contains closed captioning. (PD-42V485 ONLY)  
• When you select ON, it will be the mode selected in the Closed Caption Menu.  
• See page 43 when you set the caption/text mode.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
PANORAMA - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
REGULAR - The regular ratio is used  
when you want to watch a 4:3 broadcast  
or recorded program without modifying the  
original picture to fit the dimensions of your  
16:9 screen. The 4:3 picture will fill the  
screen from top to bottom, while black bars  
will appear to fill up the remaining space  
along the picture’s sides. The 4:3 picture  
will be centered within the boundaries of the  
16:9 screen.  
CINEMA - This ratio “zooms in” on the  
center part of a 4:3 aspect picture, blowing  
it up to fill the 16:9 screen.  
CINEMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
FULL - This is the ratio to use when  
watching 16:9 High-Definition broadcasts.  
HD PANORAMA - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
NTSC, 480i, 480p  
HD, 720p  
ASPECT  
ASPECT  
PANORAMA  
CINEMA  
HD PANORAMA  
CINEMA ZOOM  
FULL  
FULL  
REGULAR  
Notes:  
You can also choose the size by pressing the πbuttons.  
• When you change the aspect ratio or signal, reset the picture position to center.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the front of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose  
ASPECT by pressing Menu  
on the front panel and choose a mode by using the CHANNEL  
+/- buttons (  
OPERATE  
®
).  
Menu  
The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
TV/CATV Slide Switch  
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to  
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.  
Note:  
• See page 26 for information on programming your remote for cable box operation.  
VCR/DVD Slide Switch  
You can control a VCR or DVD player with the buttons on the lower part of the remote control.  
Move the slide switch to VCR or DVD to operate.  
Notes:  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 27.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 28.  
VCR Buttons  
You can use this remote control to operate the basic functions of your VCR. These functions  
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and  
power off.  
Move the selector switch to VCR to operate.  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 27.  
DVD Buttons  
You can also use this remote control to operate the basic functions of your DVD player. These  
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,  
power on, and power off.  
Move the selector switch to DVD to operate.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 28.  
Light  
All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide  
switch and LIGHT button. Press the LIGHT button to turn the illumination on for 4 seconds.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Warnings  
No Program  
This OSD warning appears on the television when the television is receiving a carrier signal, but  
the carrier signal does not contain any broadcast programming.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the table below to check the condition. If you think that there is a problem, contact the  
JVC Service Center where you purchased the television.  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
There is no picture  
or sound  
• The antenna could be disconnected.  
• The input mode could be set improperly. See page 59.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 33.  
• The TV station may be having difficulties. Check to see if other stations are working.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
• Check that the TV/CATV switch is in the proper position.  
You may be too far from the TV. You must be within 23 feet (7 meters).  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 33.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 34.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 56.  
• Check to see if the Sleep Timer was set. See page 61.  
It does not operate  
correctly  
• This television is operated by a microprocessor. It is possible that external noise or  
interference is causing the problem. If the television does not function correctly, remove the  
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet  
again and operating the television.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 55.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 50.  
• The Video Status mode may be turned to the wrong setting. See page 61.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 80% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 43.  
• Make sure the MTS settings are correct. See page 54.  
Stereo or bilingual  
programs can't be  
heard  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
There is no sound  
from the TV's  
speaker  
• The Center CH Input may be turned on. See page 49.  
• The TV Speaker option may be turned off. See page 47.  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
The AUTO DEMO  
• The TV recieved a signal from the AV CompuLink  
finished automatically • The On Timer that you programmed has started.  
• The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.  
• The Auto Shut Off that you programed has occured.  
The following are not malfunctions.  
The television may make a creaking sound if the temperature of the room or the  
temperature of the inside of the television changes. If there is no problem with the screen or  
sound, then there is no need to worry.  
Although the picture may be temporarily disturbed and noise may be seen on the screen if  
the power is turned on immediately after it has been turned off, this is not a malfunction.  
• If the television is used at a location above 2,000 m, a buzzing noise and image distortion  
may occur. This phenomenon is peculiar to PDP (Plasma Display Panel), and could occur  
with any television using PDP. It is not a malfunction.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PD-42V485  
PD-42V475  
Model  
Type  
Plasma Screen  
NTSC, BTSC System (Multi-Channel Sound)  
Reception Format  
Reception Range  
VHF 2 to 13, UHF 14 to 69 Sub, Mid, Super, Hyper and Ultra bands  
(180 channel frequency synthesizer system)  
Power Source  
AC 120V, 60 Hz  
364W  
Power Consumption  
Screen Size  
42 inch / 107.5 cm  
measured diagonally,  
16:9 ratio  
Audio Output  
Speakers  
10W + 10W  
6.6 cm round x 4  
Antenna Terminal  
(VHF/UHF)  
75 ohms (VHF/UHF)(F-type connector)  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
External Input Jacks  
Component Input  
Jack  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
Pb/Pr: 0.7 Vp-p 75 ohms  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
S-Video Input Jacks  
Audio Output Jacks  
(VARI/FIX)  
VARI: More than 0 1000mVrms (+2.2dBs)  
FIX: 500mVrms (-4dBs) Low impedance (400 Hz when modulated 100%)  
AV CompuLink III  
Jack  
3.5 mm mini jack X 1  
Analog RGB D-SUB (15 pin) x 1  
• PC signal is available. Refer to page 22 for details on the signals which  
can be input.  
PC Input Jack  
Digital–In  
HDMI jack x 1  
Note: The Digital–In terminal is not compatible with picture signals of a  
personal computer  
Dimensions (inch/cm)  
W X H X D  
41 1/4 x 31 1/4 x 12 1/4 / 104.5 x 79.1 x 30.8 (with the stand)  
41 1/4 x 28 3/4 x 4 3/8 / 104.5 x 72.9 x 11 (without the stand)  
106.3 / 48.3 (with the stand)  
84.3 / 38.3 (without the stand)  
Weight (lbs / kg)  
Accessories  
Refer to "unpacking your TV", page 8  
Specifications subject to change without notice.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Paint Sprayer 635043 User Manual
Ingersoll Rand Power Screwdriver 1R User Manual
Insignia Flat Panel Television NS LCD27FS User Manual
Jabra Headphones BT130 User Manual
JVC Home Theater System TH M508 User Manual
KitchenAid Mixer KHM72 User Manual
Kodak Digital Camera C182 User Manual
Kolcraft Stroller S47J R7 9 06 User Manual
Konica Minolta Digital Camera Vectis 100 BF User Manual
Kramer Electronics TV Cables 2900 000483 User Manual