JVC Flat Panel Television LT 47EM59 User Manual

LCD Television Users Guide  
LT-42X579  
LT-47X579  
LT-42EM59  
LT-47EM59  
1080p HDTV  
Important Note:  
In the spaces below, enter the model and serial number of your television (located at the  
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this  
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton  
and original packaging for future use.  
Serial Number:  
LCT2387-001A-A  
0208KTH-II-IM  
Model Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: To reduce the risk of electric shock. Do not  
remove cover (or back). No user serviceable  
parts inside. Refer servicing to qualified service  
personnel.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle is intended to alert the user to the  
presence of uninsulated “dangerous voltage” within  
the product’s enclosure that may be of sufficient  
magnitude to constitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS  
APPARATUS TO RAIN OR MOISTURE.  
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES  
REGARDING THE USE OF THIS UNIT.  
1. Operate only from the power source specified on the unit.  
2. Avoid damaging the AC plug and power cord.  
3. Avoid improper installation and never position the unit where good ventilation is unattainable.  
4. Do not allow objects or liquid into the cabinet openings.  
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair  
it yourself or remove the rear cover.  
Changes or modifications not approved by JVC could void the warranty.  
* When you don’t use this TV set for a long period of time, be sure to disconnect both the  
power plug from the AC outlet and antenna for your safety.  
* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or  
other outlet unless the blades can be fully inserted to prevent blade exposure.  
®
• As an “ENERGY STAR ” partner,  
JVC has determined that this  
product or product model meets the  
®
“ENERGY STAR ” guidelines for energy  
efficiency.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
IMPORTANT RECYCLING INFORMATION  
This product has a fluorescent lamp that contains mercury. Disposal  
of these materials may be regulated in your community due to  
environmental considerations. For disposal or recycling information,  
please contact your local authorities or for USA, the Electronic Industries  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and  
a third grounding prong. The wide blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury  
from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
16) Place the television on a stable, flat surface. Failure to do so can result in the television  
falling, causing injury.  
17) DO NOT allow young children to play around or on the television. Failure to do so can  
result in the television falling, causing injury.  
18) DO NOT allow young children to play with the plastic bag that came with the television  
when you unpacked it. Failure to do so can result in suffocation, causing injury.  
19) Avoid improper installation and never position the unit where good ventilation is impossible.  
When installing this TV, distance recommendations must be maintained between the set  
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the  
minimum distance guidelines shown for safe operation.  
200 mm  
7 7/8 in  
200 mm  
7 7/8 in  
150 mm  
5 7/8 in  
150 mm  
5 7/8 in  
50 mm  
2 in  
20) Cautions for installation  
— Do not tilt the TV towards the left or right, or towards the back.  
— Install the TV in a corner on the floor so as to keep cords out of the way.  
— The TV will generate a slight amount of heat during operation. Ensure that sufficient  
space is available around the TV to allow satisfactory cooling.  
21) When attaching to a wall, use the optional JVC wall mounting unit.  
For LT-42X579 / LT-42EM59: JVC-XUF-2637 LCD FLAT WALL MOUNT  
For LT-47X579 / LT-47EM59: JVCPCM-MS2 TILT/FLAT WALL MOUNT  
Caution  
— Consult qualified installers.  
— See the included manual on mounting procedures.  
— JVC is not responsible for damages or injuries due to improper mounting.  
— Use with other wall mounting unit is capable of resulting in instability or causing possible  
injury.  
22) Make enough room for inserting and removing the power plug. Place the TV as close  
to the outlet as possible. The main power supply for this TV is controlled by inserting or  
removing the power plug.  
23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.  
24) When this TV is connected to the wall outlet, it is always on standby even when all the LED  
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.  
FCC Notice:  
Caution: Changes or modications not expressly approved by party responsible for  
compliance could void the user's authority to operate the equipment.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
We have an important note for customers who subscribe to basic cable services (do not have  
a separate cable box) and plan to use their JVC TV remote control to select channels.  
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is  
receiving through the RF input), every channel number available from your cable company  
will appear in your television’s Channel Summary and they will all be marked as available for  
scanning. Even though every channel is detected and appears as available, you will only be  
able to view those that you specically subscribe to from your cable company. This will likely  
mean there are blank channels between those channels you wish to scan or “surf”.  
We apologize for any inconvenience this may cause but it is important to note that this is  
not a malfunction of your television. If you want to sequentially scan those channels you  
subscribe to without blank ones in between, you can contact your cable company for their  
cable box and remote, or manually deselect them using the edit / skip feature on page 30.  
Avoiding Temporary Burn-in  
Displaying xed images for extended periods of time can leave a subtle but temporary burn-in  
image on your screen. To avoid this, mix your viewing pattern.  
Examples include, but are not limited to the following:  
For example...  
• Stock-market report bars  
• Shopping channel logos and pricing  
displays  
TV on  
TV off  
• Video game patterns or scoreboards  
• Bright station logos  
• Internet web sites or other computer-style  
images  
• DVD discs, video tapes, laser discs  
• Broadcast, cable, satellite channels or  
digital television tuners/converters  
XYZ  
XYZ  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly  
moistened with water. You can add a few drops of mild liquid detergent to the water to help  
remove spots of oily dirt.  
• DO NOT allow liquid to enter the TV through the ventilation slots.  
• DO NOT use strong or abrasive cleaners on the TV.  
• DO NOT spray liquids or cleaners directly on the TV’s surface.  
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a  
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner  
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
Do not push or hit the screen. This could cause scratches on the screen surface and image  
distortions.  
Tidying the cables  
A cable holder which keeps your connection cables tidy is attached to the back of the stand.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Disconnecting the stand  
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.  
1) Place the TV face down on a soft cloth on a table.  
2) Remove the six screws from the back of the TV.  
3) Pull out the stand from the TV.  
Note:  
To re-install the stand, reverse the procedure from 3) to 1).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Package Contents  
Make sure you have the following.  
AA Batteries x 2  
Remote Control x 1  
Television x 1  
Insert the batteries  
Use two “AA” batteries (included).  
Place the "" end in the unit first, making sure the "+" and  
"" markings are correct. Place the "" end in the unit  
first.  
If this symbol is shown, it is only valid  
in the European Union  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
The following pages gives you a brief description of each button’s function. For more detailed  
information on the remote control buttons, see pages 19 - 21.  
Change the aspect ratio of the image on your  
TV screen. See page 20.  
Turns the TV on or off.  
Switch between devices  
connected to Video-1, 2, 3,  
4 and 5.  
Change channels.  
Choose how long the TV will stay on before  
turning off. See page 19.  
Used to select sub channels.  
(Digital channels only). See page 21.  
Listen to a program in stereo, mono or  
another language (SAP). (Depending on  
availability in the program). See page 21.  
Lets you decide the input channel and select  
it. After pressing the remote 0 - 9 buttons,  
press TUNE.  
Lets you go back to the previously selected  
channel. See page 19.  
Programming information. (Digital channels  
only). See page 21.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Used to navigate through the TV’s  
onscreen menus.  
View current channel information.  
Used to select the mode of closed caption  
Used to access the TV’s onscreen menus.  
See page 22.  
Go back to a previous onscreen menu or to  
correct a mistake.  
Move sequentially through the channels.  
Save your favorite channels. See page 19.  
Turns the TV volume to 0. Press again to  
restore the volume.  
Raise or lower the volume.  
Choose different display settings according to  
personal preferences. See page 20.  
Choose several types of sound frequencies.  
See page 20.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Before you connect your television to another device, please refer to the proper diagrams for  
your specific TV and remote. These will help assist you in understanding how to connect your  
television to another device, as well as use the remote to set up your television. Some of the  
connection terminals are color coded for easy connection with the proper cables.  
Front Panel  
Power Lamp  
Remote Control Sensor  
Side Panel  
Input  
Change the input  
INPUT  
MENU  
MENU  
Used to access the TV’s onscreen menus.  
+CH–  
CHANNEL  
Move sequentially through the channels.  
+VOL–  
Raises or lowers the volume.  
OK  
VOLUME  
POWER  
BACK  
Turn the TV on or off.  
POWER  
Photo Viewer Connector  
• Do not use Photo Viewer connector to  
PHOTO VIEWER  
connect the iPod  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
A
U
D
I
O
O
U
T
L
L
L
R
R
INPUT  
HDMI ANALOG  
AUDIO  
1
AUDIO  
VIDEO  
R
COMPONENT  
I
N
P
U
T
5
Y
PB  
PR  
R
AUDIO  
INPUT 1  
INPUT 2  
INPUT 3  
S-VIDEO  
VIDEO  
L
I
N
P
U
T
4
COMPONENT  
D
I
G
I
T
A
L
A
U
D
I
O
O
P
T
I
C
A
L
O
U
T
Y
PB  
PR  
LC34324-001A  
75 Ω  
(VHF/UHF)  
INPUT  
1
INPUT  
2
INPUT  
3
V/
F
Antenna / Cable  
* For more detailed information, see  
pages 42 - 46.  
A / B  
A
A
AUDIO OUT  
L
L
L
R
R
R
INPUT 1  
HDMI ANALOG  
AUDIO  
DVD Player  
AUDIO  
VIDEO  
INPUT 5  
COMPONENT  
Y
P
B
PR  
AUDIO  
VIDEO  
COMPONENT  
L
R
S-VIDEO  
INPUT 4  
DIGITALAUDIO OPTICAL OUT  
Y
PB  
PR  
LC34324-001A  
STB (Digital Cable,  
satellite) Tuner Box  
* This is used  
when you are  
using HDMI  
analog audio  
C / E  
Video Camera  
C / E  
Game Console  
D
G
H
Audio System  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Device Side  
With Cables  
TV Side  
A
HDMI  
HDMI Cable  
INPUT 1, 2 or 3  
B
DVI – HDMI Cable,  
Audio Cable  
Input 1 +  
HDMI ANALOG AUDIO  
DVI + Audio  
C
Component  
Component  
Video + Audio  
Video + Audio  
INPUT 4 or 5  
D
S-Video Cable,  
Audio Cable  
INPUT 4 +  
AUDIO Input  
S-Video + Audio  
E
Composite  
Video + Audio  
Composite  
Video + Audio  
INPUT 4 or 5  
F
Antenna / Cable  
(VHF / UHF)  
75Ω  
(VHF / UHF)  
RF Cable  
G
OPTICAL AUDIO  
Cable  
DIGITAL AUDIO  
OPTICAL OUT  
OPTICAL INPUT  
H
AUDIO INPUT  
AUDIO OUT  
(L / R)  
(L / R)  
Audio Cable  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Basic Controls  
Compatible Signal  
Notes  
Input  
• HDMI (Digital)  
SD: 480i, 480p  
See page 46.  
HD: 1080i, 1080p/60Hz, 720p  
Audio L/R  
Input  
• DVI (Digital)  
SD: 480i, 480p  
HD: 1080i, 1080p/60Hz, 720p  
• Audio L/R (Analog)  
See page 45.  
See page 43.  
Input  
• Component (Analog)  
SD: 480i, 480p  
HD: 1080i, 720p  
• Audio L/R (Analog)  
Input  
• S-Video (Analog)  
• Audio L/R (Analog)  
Input  
• Composite (Analog)  
• Audio L/R (Analog)  
See page 43.  
See page 42.  
ATSC (Digital)  
NTSC (Analog)  
Clear QAM (Digital)  
Output  
• Audio L/R (Digital)  
(PCM or Dolby Digital)  
See page 44.  
See page 44.  
Output  
• Audio L/R (Analog)  
(Fixed)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Initial setup  
When you turn on your TV for the first time, the Initial Setup menu appears automatically.  
These menus will help you setup your TV with basic information for Language, Time and  
Tuner Setup. You can also set this setting in the “Plug in Menu”.  
1) Turn on the TV  
2) Set the language  
1 Select a language  
Set Language/Langue/Idioma  
English  
Next  
2 Select “Next”  
3 Move to next menu  
3) Set time attribute  
1 Change settings  
Set Time Attribute  
Time Zone  
D.S.T.  
Atlantic  
ON  
Next  
2 Select an item  
3 Select “Next”  
4 Move to next menu  
Time Zone Choose the time zone you live in.  
D.S.T.  
Changes the clock automatically for daylight  
saving time. On / Off  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Initial setup (Continued)  
4) Set TV attribute  
1 Change settings  
Set TV Attribute  
Tuner Mode  
Start Scan  
Air  
Exit  
2 Select an item  
3 Select “Start Scan”  
4 Start scanning  
channels  
Tuner Mode  
Choose Air (antenna) or Cable  
* If you use a set top box (satellite or cable box), press “Exit” to  
skip this step.  
Cable Users: After your auto tuner setup is complete, you may,  
(depending on the type of hookup), have only 1 channel, usually  
2, 3 or 4 in the auto tuner memory. This is normal.  
“Thank you! Setup is now complete”  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Features  
Your JVC TV is equipped with many features. Here is some key features  
highlighted in detail.  
1 Stunning picture quality via 1920x1080 Full HD panel.  
Dynamic Gamma and Color Management give further  
ne tuned picture reproduction. Smart Picture adjusts the  
best possible picture quality automatically scene by scene  
based on the incoming signal from any source!  
2 JVC exclusive oblique cone speakers provide excellent  
TV sound quality. OmniSurround sound provides you 4  
different settings based on the program you are watching.  
The equalizer will ne tune your listening preferences.  
3 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of  
connections are explained in pages. 42 to 46.  
x 1  
x 3  
x 2  
4 Aspect mode will show every pixel you are getting in High Denition. The Native mode will  
show 100% of 1080p. Full – with slight overscan. Panarama, Cinema will ll the screen  
with various aspect settings.  
Full or Widescreen Mode  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
Sleep  
Allows you to choose how long the TV will stay on before turning off.  
Notes:  
• When you press the SLEEP button several times, you can set the interval at Off, 15, 30, 45,  
60, 90, 120, 150 and 180 minutes.  
• 60 seconds before the TV turns off, a message will appear and it will count the remaining  
time. If you want to extend the time, press the SLEEP button and you can change the  
interval. If you don’t press the SLEEP button, within 60 seconds the TV will turn off.  
Return+ TV  
Has three functions.  
Return – Returns to the channel viewed just before the channel currently onscreen.  
Return+ – Lets you program a specific channel to return to while scanning through the  
channels using the – CH + button as you memorize the channel.  
TV – Returns to the TV mode as you are watching a video, DVD, etc.  
Note:  
• Press TUNE and RETURN+ TV buttons. This will memorize the current channel to return  
to while you scan through the other channels. To cancel, press TUNE and RETURN+ TV  
buttons again.  
Favorite  
Allows you to save channels you like so you can view them easily. First you must register the  
channels you like.  
Notes:  
• Go to the channel you want to register and press the FAVORITE. A list will appear. Press  
the FAVORITE button again to register your channel.  
To view your favorite channels, press FAVORITE. Move πto select your channel and  
press OK.  
To erase your favorite channels, press FAVORITE. Move πto select your channel and  
press ®.  
• Both analog and digital channels can be registered.  
• The channels you registered will appear in numerical order at the top of the list.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
Aspect  
Allows you to adjust the way the image appears on your TV based on the format that is being  
received.  
Panorama / Cinema / Full / Panorama Zoom / Cinema Zoom / Full Native / Regular / Slim  
See page 28.  
Notes:  
You can select the aspect mode by pressing the ASPECT button.  
You can also access the aspect modes using the buttons on the side of the TV, by using the  
MENU button, then the – CH + button.  
Sound  
You can choose several types of sound modes. Speech / Jazz / Classic / Rock / User  
Notes:  
You can choose the different sound modes by pressing the SOUND button.  
• If you select User, you can customize the various sound frequencies.  
Video  
Allows you to choose different picture settings according to personal preferences. You can  
access this feature for each input (TV, V1, V2, V3, V4, V5).  
Standard / Dynamic / Theater / Game  
See page 23.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions  
Guide  
You can view program information for Digital Channels.  
Note:  
• When the program information is not being broadcast, the correct information will not be  
displayed.  
• The GUIDE will not show the correct time and date depending on the Time Zone and D.S.T.  
settings. See page 40.  
SUB CH  
Digital broadcast sometimes offers sub channels. By using the SUB CH button, you can select  
a sub channel easily.  
For example, to move to sub channel 123-45:  
1) Press 1, 2 and 3 in order  
2) Press the SUB CH button  
3) Press 4 and 5 in order  
4) Press the TUNE button  
ML/MTS  
Allows you to listen to a program in stereo, mono sound or another language (SAP) if available.  
First you must set the MODE to TV on your remote.  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• MTS is unavailable if your television’s Input source is (V1, V2, V3, V4, V5).  
• ML/MTS will not work when you are using HDMI.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
1) Display the menu bar  
2) Display the desired menu  
Picture  
Video Status  
Display  
TV  
Sound  
Power  
Setting  
Game  
50  
Tint  
0
0
0
0
0
0
100  
100  
100  
100  
100  
100  
Select  
Color  
25  
Picture  
50  
Bright  
43  
Detail  
94  
Backlight  
50  
Color Temp  
Color Management  
Dynamic Gamma  
Smart Picture  
Digital VNR  
MPEG NR  
Natural Cinema  
Video Reset  
Cool  
Off  
On  
On  
High  
On  
On  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Enter  
3) Change or adjust the setting  
Select  
Picture  
Video Status  
D
Game  
50  
Tint  
0
0
0
0
0
0
100  
100  
100  
100  
100  
100  
Color  
25  
Picture  
50  
Bright  
43  
Change / Adjust  
Detail  
94  
Backlight  
50  
Color Temp  
Color Management  
Dynamic Gamma  
Smart Picture  
Digital VNR  
MPEG NR  
Natural Cinema  
Video Reset  
Cool  
Off  
On  
On  
High  
On  
On  
To enter an item’s sub menu  
Select  
Enter  
Please insert scan  
number or range  
to  
Start  
(Example: Add Channel)  
To the previous screen  
Note:  
• Depending on the situation  
(analog channels, digital  
channels, video signal  
format, external inputs,  
etc.), some items will be  
displayed in gray and can  
not be selected.  
4) Close the menu  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Picture  
Picture  
Display  
TV  
Sound  
Power  
Setting  
Video Status  
Tint  
Game  
0
0
0
0
0
0
50  
25  
100  
100  
100  
100  
100  
100  
Color  
Picture  
50  
Bright  
43  
Detail  
94  
Backlight  
50  
Color Temp  
Color Management  
Dynamic Gamma  
Smart Picture  
Digital VNR  
MPEG NR  
Natural Cinema  
Video Reset  
Cool  
Off  
On  
On  
High  
On  
On  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Video Status  
Choose different display settings according to personal preferences. You can use this feature  
with TV, V1, V2, V3, V4 and V5.  
Standard  
Resets the picture display to the factory settings.  
Dynamic  
Gives a vivid picture with better contrast when viewing in a brightly lit room.  
Theater  
Gives a rich, film-like look to video when viewing in a dimly lit room.  
Game  
Used for when you are playing video games connected to your TV.  
Notes:  
• Each mode is memorized for each input (TV, V1, V2, V3, V4, V5) connected to the TV.  
• Each video status setting has a separate memory for HD (1080i/1080p/720p) and SD  
(480p/480i) video signal. Each video status can be chosen along with your favorite picture  
settings (Tint, Color, Picture, Bright, Detail and Backlight).  
– When an HD or SD signal is displayed, your HD or SD settings are recalled for the video  
status you are using.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Picture (Continued)  
Allows you to change and adjust the way the picture appears on your television.  
Tint  
Allows you to adjust the levels of red and green on your TV.  
Color  
Allows you to make all the colors on your TV appear more vivid or subtle.  
Picture  
Allows you to adjust the level of black and white on your TV giving you a darker or brighter  
picture overall.  
Bright  
Allows you to adjust the overall brightness of the TV.  
Detail  
Allows you to adjust the level of fine detail on your TV.  
Backlight  
Allows you to adjust the brightness of the internal lamp which effects the overall brightness of  
the TV.  
Color Temp  
Allows you to change how strong or dull the colors appear. Cool / Natural / Warm  
Color Management  
Allows you to compensate for dull colors to ensure dull colors are reproduced with natural hues.  
On / Off  
Dynamic Gamma  
Allows you see more detail in very dark or bright areas so these areas don’t appear “muddied”.  
Normally, this feature should be left On for optimum picture quality. On / Off  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Picture (Continued)  
Smart Picture  
Allows you to adjust the brightness level automatically to a level suitable for what you are  
watching. On / Off  
Digital VNR  
This function can be selected to change the effect of Digital VNR (Video Noise Reduction).  
High – Adjusts the effect maximally  
Low – Adjusts the effect minimally  
MPEG NR  
This function effects the block noise removal and mosquito NR (Noise Reduction)  
simultaneously.  
Note:  
• When you are receiving digital channels, block noise removal will have no effect.  
Natural Cinema  
Allows you to compensate for image blurring when the original video you are watching was  
shot at 24 frames/sec, and is broadcast at 30 frames/sec. This conversion error is known as  
“TELECINE”. On / Off  
Notes:  
• When you are receiving a 480p, 720p or 1080p signal, Natural Cinema cannot be selected.  
• Natural Cinema is only applied for SD 480i and HD 1080i signals.  
Video Reset  
Resets all picture adjustments at once to the default settings, except for Natural Cinema.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Display  
Picture  
Display  
Video Input Label  
TV  
Sound  
Power  
Setting  
AIR TV  
Photo Viewer  
Aspect Ratio  
Cinema Zoom  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Video Input Label  
Allows you to label all the devices you have connected to the TV that use the VIDEO-1, 2, 3, 4  
and 5 inputs.  
VCR  
DVD  
1 Select  
PVR  
D-VHS  
STB  
SAT  
AMP  
GAME  
CAM  
DISC  
2 Set  
Blu-ray DVD  
Default  
Photo Viewer  
Connect your USB Mass Storage Class device to the Photo Viewer terminal on the TV.  
Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class  
devices. You can view them on the TV in high quality.  
1) Choose Slide Show Interval of 5, 10 or 20 seconds by pressing the ® buttons.  
1 Select  
Thumbnail View  
Interval  
10  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Display (continued)  
2) Choose Thumbnail View by pressing the ® button, and a folder list will be displayed. Select  
your folder by using the ® or πbuttons. The screen will show the first 10 images.  
* If there is more than 10 images, those images will be shown in the next page. To go to the  
next page, select the last image on the page and press the ® or buttons. To go back to  
the previous page, press the or π buttons.  
3) Choose a picture and press the OK button. It will now be shown on the screen. To move to  
the next picture, press the ® or buttons. To move to the previous picture, press the or  
π buttons.  
1 Select  
2 Display  
TUNE  
90º Rotation  
180º Rotation  
270º Rotation  
360º Rotation  
Start Slideshow  
2
4
8
6
4) To go back to main menu, press the MENU button.  
Notes:  
• Please pull out your USB device from the Photo Viewer terminal after nishing the “Photo  
Viewer” menu.  
• Use the supplied USB cable that came with your device. Do not use HUB or USB extension  
cable.  
• Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. It may take  
some time to display or it may not display correctly.  
notes regarding your devices you wish to connect.  
• Supported le formats are “.jpg” or “.JPG”.  
• All your stored data should be backed up rst as a precaution before connecting to the TV.  
• Depending on your stored le size, it can take extra time to display “Photo Viewer” page.  
You can not display photos using the SD card from the JVC Everio Camera.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Display (continued)  
Aspect Ratio  
Allows you to adjust the way the image appears on your TV based on the format that is being  
received.  
Panorama - When watching a 4:3 aspect picture it is stretched to fit the dimensions of the 16:9  
aspect screen.  
Cinema - This ratio “zooms in” on the center part of a 4:3 aspect picture, blowing it up  
proportionally to fill the 16:9 screen.  
Full - When watching a 4:3 aspect picture, it is stretched to fit the dimensions of the TV. When  
watching a 16:9 aspect picture, it displays 95% of the ratio.  
Panorama Zoom - When watching a High-Definition 16:9 aspect picture it is stretched to  
eliminate the black side bars.  
Cinema Zoom - This ratio “zooms in” on the center part of a High-Definition 16:9 aspect image  
to eliminate the black surrounding bars.  
Full Native - This ratio displays 100% of the ratio. Normally, all aspects except for Full Native  
display about 95%.  
Regular - When watching a 4:3 aspect picture without modifying the original picture to fit the  
dimensions of your 16:9 screen. Black bars will appear along the picture’s sides. The picture  
will be centered within the boundaries of the 16:9 screen.  
Slim - This aspect mode shrinks the screen of a 16:9 broadcast to 4:3. There are some  
programming that is already stretched by mistake at broadcasting companies, so this mode  
corrects it. Black side bars will appear.  
Notes:  
• Depending on the signal format, some aspect modes are unavailable.  
• Slim can only be displayed when the signal is ATSC (480i, 480p, 720p, 1080i) or HD (720p,  
1080i).  
• If the television receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
Full automatically. If the television receives a 4:3 signal from your HDMI device when you are  
in Full aspect mode, it will return to Regular aspect mode. If you change the aspect mode  
after the television changed it to Full automatically, the television will change to the aspect  
mode you choose. It also turns to Full automatically when the TV receives an HD (1080i or  
720p) signal.  
You can access the aspect modes using the buttons on the side of the TV, by using the  
MENU button, then – CH + button.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Settings  
ON  
Air  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Guide  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Closed Caption  
Allows you to select the mode of the closed caption. First you must set the MODE to either TV,  
STB or VCR on your remote. On / Smart / Off  
C.C. Setting  
You can choose between caption or text in MODE to decide how closed captioning will appear.  
1 Select  
Analog CC  
Digital CC  
Font  
CC1  
Service1  
Default  
Standard  
Default  
Default  
Default  
Default  
Default  
Off  
Font Size  
Font Style  
Text Color  
Text Opacity  
BG Color  
2 Adjust  
BG Opacity  
Edge Color  
Smart Caption  
On  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (continued)  
Analog CC  
Choose the CC feature that you like for analog Closed Captioning.  
Digital CC  
Choose the CC feature that you like for digital Closed Captioning.  
Font  
Choose the font that you like for Closed Captioning.  
Font Size  
Choose how big the text appears in Closed Captioning.  
Font Style  
Choose the style of the font in Closed Captioning.  
Text Color  
Choose the color of the text in Closed Captioning.  
Text Opacity  
Choose how translucent the text appears in Closed Captioning.  
BG Color  
Choose the background box color for the Closed Captioning text.  
BG Opacity  
Choose how translucent the background box color for the Closed Captioning text.  
Edge Color  
Choose the color of the border of the background box color for the Closed Captioning text.  
Smart Caption  
Will display closed captioning when you press the MUTING button only on channels where the  
broadcast contains closed captioning.  
Tuner Mode  
If you skipped this step in the initial setup or your setup has changed, you can redo your setup  
in this menu. Air / Cable  
Autoscan  
Allows you to scan through all available channels your TV can receive, and memorizes them.  
Note:  
• The Autoscan is finished when the message Scanning has completed appears on the  
screen.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (continued)  
Add Channel  
Allows you to add analog channels. Regarding digital channels, the only channels that will  
appear are the ones that are being broadcast.  
1 Select  
Please insert scan  
number or range  
to  
Start  
2 Start  
Enter the new channel number  
Edit Channel  
Allows you to skip channels when using the + CH – button. “” means don’t skip, “ “ means  
to skip. You can still access those skipped channels manually using the number buttons on the  
remote.  
Main Channel List  
3-2  
CH-2  
CH-3  
3-3  
1 Select  
2 Next  
5-0  
6-0  
6-0  
11-0  
14-0  
22-1 CH-1  
36-0  
Set  
63-0  
V-Chip  
Allows you to block channels or content that you deem inappropriate for children. See pages  
32 – 36.  
Guide  
You can view program information. (Digital channels only).  
Note:  
• If the programming information is not being broadcast, the guide function has no effect or  
may display incorrect information.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (V-Chip)  
Allows you to block channels or content that you deem inappropriate for children.  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Setting  
ON  
Air  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Password  
MPAA  
Can. Eng.  
Can Fre.  
TVPG  
Guide  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Notes:  
• V-CHIP will not work with video signals from VCRs, DVD players, Blu-ray, HD DVD players or  
camcorders connected to the TV.  
(For Canadian viewers only): V-CHIP is designed specifically for the US and may not work  
properly in Canada.  
– When entering the password –  
When you try and access the V-Chip menu, “Please input password” will appear. Press the “0”  
button four times on your remote to access the V-Chip menu for the first time.  
Please input password  
– When you lock or unlock channels –  
You can lock or unlock ratings as shown below.  
1 Select  
Password  
MPAA  
NR  
G
PG  
PG13  
R
Can. Eng.  
Can Fre.  
TVPG  
NC-17  
X
2 Lock / Unlock  
Note:  
• If you lock a rating, any rating that is higher is automatically blocked.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (V-Chip) (continued)  
Password  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Setting  
You can change the four digit password using  
the number buttons on your remote.  
ON  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Air  
Password  
New Password  
MPAA  
Confirm Password  
Can. Eng.  
Can Fre.  
TVPG  
OK  
Clear  
Please set password first to act  
Guide  
* If you forget your password, unplug the TV  
from the wall and then plug it back in. Your  
password will reset to “0000”  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
1) Set a new password  
Next  
Enter the four digit number  
2) Conrm and set  
Next  
Set  
Enter the four digit number  
MPAA  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Setting  
This setting is based on the US Motion Picture  
Association of America (MPAA) ratings system.  
ON  
Air  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Password  
NR  
G
MPAA  
PG  
Can. Eng.  
Can Fre.  
TVPG  
PG13  
R
NC-17  
X
Guide  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (V-Chip) (continued)  
MPAA (continued)  
NR Not Rated.  
Any type of programming that does not contain a rating.  
G General Audience.  
Suitable for all ages.  
PG Parental Guidance Suggested.  
Suitable for all ages with parental guidance.  
PG 13 Parents Strongly Cautioned.  
Intended for viewers 13 years or older.  
R Restricted.  
Not recommended for viewers 17 years without parental guidance.  
NC-17 No One Under 17.  
Not intended for viewers 17 years or younger.  
X No One Under 18.  
Not intended for viewers 18 years or younger.  
Viewing Guidelines:  
At the beginning of a program, the program will display its rating and the content it contains.  
(Except for unrated programming).  
A program can contain any or all of the following:  
V/FV VIOLENCE/FANTASY VIOLENCE  
S SEXUAL CONTENT  
L – Strong LANGUAGE  
D – Suggestive DIALOG  
Can. Eng.  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Setting  
This setting is based on the Canada ratings  
system.  
ON  
Air  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Password  
E
C
MPAA  
C8  
G
Can. Eng.  
Can Fre.  
TVPG  
PG  
14  
18  
Guide  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (V-Chip) (continued)  
E Exempt.  
Any type of programming that does not contain a rating.  
C Intended for children.  
Suitable for all ages.  
C8+ Intended for children over 8 years old.  
Suitable for all ages over 8 years.  
G General Audience.  
May contain material not suited for younger viewers.  
PG Parental Guidance.  
May contain material not suited for younger viewers. Parents may consider some content not  
appropriate for children 8 - 13 years old.  
14+ 14 Years or Older.  
Parents strongly urged to use their discretion in allowing viewing by persons under 14.  
18+ Adult.  
Intended for viewers 18 years or older.  
Can. Fre.  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Setting  
This feature is the same as V-CHIP (SET  
CANADIAN RATINGS ENG), but in French.  
ON  
Air  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Password  
E
G
8
MPAA  
Ans  
Can. Eng.  
Can Fre.  
TVPG  
13 Ans  
16 Ans  
18 Ans  
Guide  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
TV (V-Chip) (continued)  
TVPG  
Picture  
Display  
TV  
Closed Caption  
Sound  
Power  
Setting  
This setting is based on the US ratings system.  
ON  
CC Setting  
Tuner Mode  
Autoscan  
Add Channel  
Edit Channel  
V-Chip  
Air  
Password  
ALL FV  
V
S
L
D
TV-Y  
MPAA  
TV-Y7  
TV-G  
Can. Eng.  
Can Fre.  
TVPG  
TV-PG  
TV-14  
TV-MA  
Guide  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
TV Y Appropriate for all children.  
Intended for all children 2 - 6 years old.  
TV Y7 Appropriate for older children.  
Intended for children 7 years or older.  
TV G General Audience.  
Suitable for all ages.  
TV PG Parental Guidance Suggested.  
Suitable for all ages with parental guidance.  
TV 14 Parents Strongly Cautioned.  
Intended for viewers 14 years or older.  
TV MA Mature Audiences Only.  
Intended for viewers 18 years or older.  
Viewing Guidelines:  
In addition to the above ratings, you can also block or allow more specic content. (Except for  
unrated programming).  
A program can contain any or all of the following:  
V/FV VIOLENCE/FANTASY VIOLENCE  
S SEXUAL CONTENT  
L – Strong LANGUAGE  
D – Suggestive DIALOG  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Sound  
Picture  
Display  
TV  
Sound  
Power  
Setting  
MTS  
Mono  
None  
OFF  
Digital Audio(ML)  
Surround  
Sound Status  
100Hz  
Rock  
-10  
-10  
-10  
-10  
-10  
10  
10  
10  
10  
10  
8
330Hz  
4
1KHz  
5
3.3KHz  
5
10KHz  
5
Audio Reset  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
MTS  
Allows you to listen to a program in stereo, mono sound or another language (SAP).  
(Depending if available in the program). First you must set the MODE to TV on your remote.  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• MTS unavailable if your television’s input source is (V1, V2, V3, V4, V5).  
• ML/MTS will not work when you are using the HDMI.  
Digital Audio (ML)  
You can change the language if there are other languages available. (Digital channels only)  
Surround  
You can select the surround mode you like. Movie / Music / News / Mono / Off  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Sound (continued)  
Sound Status  
You can choose several types of sound modes. Speech / Jazz / Classic / Rock / User  
Note:  
• If you select User, you can customize the various sound frequencies.  
Audio Reset  
Resets all sound adjustments at once to the default settings.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Power  
Picture  
Display  
TV  
Sound  
Power  
Sleep Timer  
Setting  
OFF  
High  
Low  
Power Indicator  
Illumination  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Sleep Timer  
Allows you to choose how long the TV will stay on before turning off. First set the MODE to TV.  
Off / 15Min / 30Min / 45Min / 60Min / 90Min / 120Min / 150Min / 180Min  
Note:  
• 60 seconds before the TV turns off, a message will appear and it will count the remaining  
time. If you want to extend the time, press the SLEEP button and you can change the  
interval. If you don’t press the SLEEP button, within 60 seconds the TV will turn off.  
Power Indicator  
Allows you adjust the brightness of the blue power indicator light.  
High – Light is brightly lit  
Low – Light is dimly lit  
Off – Light is off  
Illumination  
Allows you adjust the brightness of the center blue light around the TeleDock.  
High – Light is brightly lit  
Low – Light is dimly lit  
Off – Light is off  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Setting  
Picture  
Display  
TV  
Sound  
Power  
Setting  
Plug In Menu  
Time Zone  
Pacific  
ON  
D.S.T.  
Language  
English  
OFF  
OFF  
2
Noise Mute  
Front Panel Lock  
Transparency  
Auto Shut Off  
System Info  
Auto Demo  
Optical Out  
OFF  
PCM  
OK  
BACK  
MENU  
:Exit  
:Select  
:Operate  
:Back  
Plug-In Menu  
When you turn on your TV for the first time, the Initial Setup menu appears. If you skip it, or  
your setup has changed, you can set it up in this menu anytime.  
Time Zone  
Choose the time zone you live in and the clock sets automatically.  
Atlantic / Eastern / Central / Mountain / Pacific / Alaska / Hawaii  
D.S.T.  
Adjust your TV’s clock for Daylight Savings. On / Off  
Language  
Allows you to change the TV’s onscreen menu languages to English, French or Spanish.  
Noise Mute  
Displays a blank gray screen over channels that are too weak to be received clearly.  
On / Off  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your TV  
Setting (continued)  
Front Panel Lock  
This allows you to lock the buttons on the side of the TV. On / Off  
Transparency  
Change the transparency of the menu screens. 1 / 2 / 3 / 4  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel while the  
TV is on for 10 minutes. On / Off  
System Info  
You can confirm the TV’s software version.  
Auto Demo  
Auto Demo explains this TV’s features to you.  
Notes:  
• Please complete the Initial Setup menu first. The Auto Demo mode will start  
automatically when the Initial Setup menu is completed.  
• If you press any button on the television or remote, with the exception of  
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds  
have passed with no operation, the Auto Demo mode will start again.  
• If you want to turn off the Auto Demo, press the MENU button.  
Optical Out  
You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is  
connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,  
you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to  
digital channels.  
Notes:  
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don’t  
select PCM, it cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 44.  
Manufactured under license from Dolby Laboratories. "Dolby", and  
the double-D symbol are trademarks of Dolby Laboratories.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Notes:  
• The following connection diagrams are examples on connecting some of the most common  
devices to your TV. Please refer to your device’s instruction manual on other connection  
methods or for devices not shown here in this instruction book.  
• When you are finished connecting your devices, turn on your TV and devices.  
Connect an Antenna or Basic Cable  
Cable or Antenna  
Output  
INPUT 1  
INPUT 2  
INPUT 3  
TV Rear Panel  
75 Ω  
(VHF/UHF)  
Notes:  
• If you are able to receive ATSC (Digital terrestrial) signal, High Definition (HD) broadcasting  
can be watched.  
• All digital broadcasting is not necessary High Definition. Check by pressing the DISPLAY  
button.  
• Digital broadcasting is not available in all areas.  
Connect a Cable Box  
TV Rear Panel  
CABLE BOX  
Cable or Antenna  
Output  
IN  
OUT  
INPUT 1  
INPUT 2  
INPUT 3  
75 Ω  
(VHF/UHF)  
Note:  
To view channels on your cable box, make sure your TV’s channel is set to 2, 3 or 4  
(depending on the area you live in).  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a DVD Player  
AUDIO OUT  
L
L
L
R
INPUT  
HDMI ANALOG  
AUDIO  
1
R
AUDIO  
VIDEO  
R
INPUT  
5
COMPONENT  
Y
PB  
PR  
AUDIO  
VIDEO  
COMPONENT  
L
R
S-VIDEO  
INPUT  
4
DIGITALAUDIO OPTICAL OUT  
Y
PB  
PR  
LC34324-001A  
TV Rear Panel  
(INPUT 4)  
DVD Player  
Y
P
P
Green  
Blue  
B
R
AUDIO OUT  
Red  
OUT  
R
L
Notes:  
• Green, blue and red are the most common colors for Component Cables. Some models may  
vary in color.  
To watch your DVD player, make sure your TV is displaying INPUT 4 or INPUT 5 by pressing  
the V4 or V5 button on your remote control.  
Connect a Camcorder  
AUDIO OUT  
L
L
L
R
R
INPUT  
HDMI ANALOG  
AUDIO  
1
AUDIO  
VIDEO  
R
INPUT  
5
COMPONENT  
Y
PB  
PR  
AUDIO  
VIDEO  
COMPONENT  
L
R
S-VIDEO  
INPUT  
4
DIGITALAUDIO OPTICAL OUT  
Y
PB  
PR  
LC34324-001A  
Camcorder  
TV Rear Panel  
(INPUT 4)  
Note:  
To watch video from your camcorder, make sure your TV is displaying INPUT 4 or INPUT 5  
by pressing the V4 or V5 button on your remote control.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect an Amplifier or Home Theater System  
AUDIO OUT  
L
L
L
R
R
INPUT  
HDMI ANALOG  
AUDIO  
1
AUDIO  
VIDEO  
R
TV Rear Panel  
INPUT  
5
COMPONENT  
(AUDIO OUT)  
Y
PB  
PR  
AUDIO  
VIDEO  
COMPONENT  
L
R
S-VIDEO  
INPUT  
4
DIGITALAUDIO OPTICAL OUT  
Y
PB  
PR  
LC34324-001A  
Amplifier  
or  
Home Theater System  
Speaker  
Speaker  
Notes:  
• Refer to your amplifier’s or Home Theater System’s manual for more information.  
• If you have a device connected to INPUT 1, INPUT 2 or INPUT 3, you will not be able to hear  
any audio from the AUDIO OUT on the back of the TV otherwise.  
Connect an Amplifier using the DIGITAL AUDIO OPTICAL OUT  
AUDIO OUT  
L
L
L
R
INPUT  
HDMI ANALOG  
AUDIO  
1
R
AUDIO  
TV Rear Panel  
VIDEO  
R
INPUT  
5
COMPONENT  
(DIGITAL AUDIO OPTICAL OUT)  
Y
PB  
PR  
R
AUDIO  
VIDEO  
L
S-VIDEO  
INPUT  
4
COMPONENT  
DIGITALAUDIO OPTICAL OUT  
Y
PB  
PR  
LC34324-001A  
Amplifier  
(with DIGITAL AUDIO OPTICAL INPUT)  
Speaker  
Speaker  
Notes:  
• Refer to your amplifier’s manual for more information.  
• This terminal can only output digital audio (PCM or DOLBY DIGITAL).  
• In order to use the optical output connection, select PCM or DOLBY DIGITAL. See page 41.  
You can not output sound from your DIGITAL AUDIO OPTICAL OUTPUT connection if the  
audio source is from your HDMI device.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a Digital TV Device  
AUDIO OUT  
L
L
L
R
INPUT  
HDMI ANALOG  
AUDIO  
1
R
R
AUDIO  
VIDEO  
INPUT  
5
COMPONENT  
Y
PB  
PR  
R
AUDIO  
VIDEO  
L
S-VIDEO  
INPUT  
4
COMPONENT  
DIGITALAUDIO OPTICAL OUT  
Y
PB  
PR  
LC34324-001A  
TV Rear Panel  
INPUT 1  
HDMI ANALOG  
AUDIO  
TV Rear Panel (INPUT 1)  
INPUT  
1
INPUT  
3
75  
Ω
(VHF/UHF)  
Digital TV Device  
R
L
DIGITAL OUT  
AUDIO OUT  
After the connections have been made,  
tighten the screw to secure the cables.  
Notes:  
To watch your Digital TV device, make sure your TV is displaying INPUT 1 by pressing the V1  
button on your remote control.  
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.  
• The INPUT 1 HDMI ANALOG AUDIO input can only be used with INPUT 1.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Devices  
Connect a Blu-ray, HD DVD Player or HDMI Device  
TV Rear Panel (INPUT 2)  
INPUT 1  
INPUT
75 Ω  
(VHF/UHF)  
Blu-ray / HD DVD / HDMI Compatible Device  
Notes:  
To watch your Blu-ray, HD DVD or HDMI device, make sure your TV is displaying INPUT 1,  
INPUT 2 or INPUT 3 by pressing the V1, V2 or V3 button on your remote control.  
• Some decoders may not respond depending on the equipment that is connected to the HDMI.  
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.  
• This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and  
1080/60p. It does not accept a 1080/24p signal. Please note that in some cases, a Blu-ray  
or HD DVD may only offer the choice of 1080/60i or 1080/24p. In this case, it is necessary  
to choose the 1080/60i output. Please refer to your Blu-ray / HD-DVD manual for complete  
details on choosing the correct output.  
• Some HDMI Output Devices may fail to detect this TV as a 1080p device. If this occurs,  
manually select 1080p on the HDMI Output Device.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the table below to check the condition. If you think that there is a problem, contact the  
JVC Service Center where you purchased the television.  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
• The antenna could be disconnected.  
• The tuner could be set improperly. See page 40.  
• The TV station may be having difficulties. Check to see if other stations are working.  
There is no picture  
or sound  
• Use the HDMI cable with HDMI logo  
. See page 46.  
• If you have a device connected to INPUT-1, INPUT-2 or INPUT-3, you will not be able to  
hear any audio from the AUDIO OUT on the back of the TV.  
You cannot output audio using the DIGITAL AUDIO OPTICAL OUTPUT when you have  
digital sound from an HDMI device connected to the INPUT-1, INPUT-2 or INPUT-3  
connection on the back of the TV.  
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p, 1080i and 1080p  
signals. Please check your settings.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
You may be too far from the TV. You must be within 23 feet (7 meters).  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the Auto Shut Off is set. See page 41.  
• Check to see if the Sleep Timer was set. See page 39.  
It does not operate  
correctly  
• This television is operated by a microprocessor. It is possible that external noise or  
interference is causing the problem. If the television does not function correctly, remove the  
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet  
again and operating the television.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 24.  
• The Video Status mode may be turned to the wrong setting. See page 23.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
Screen is 80% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 29.  
• Make sure the MTS settings are correct. See page 37.  
Stereo or bilingual  
programs can't be  
heard  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
The picture is slightly • Change the picture format setting on your external device to 1080i or other resolution.  
cut off when you use  
1080p format only  
The screen  
disappears except for  
the menu screen  
• This occurs when you select a digital menu when your input source is from the HDMI  
connection. Press the menu button.  
My HDMI device  
doesn’t work or  
doesn’t work properly  
• This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and  
1080/60p. It does not accept a 1080/24p signal. Please note that in some cases, a Blu-ray  
or HD-DVD may only offer the choice of 1080/60i or 1080/24p. In this case, it is necessary  
to choose the 1080/60i output. Please refer to your Blu-ray/HD-DVD manual for complete  
details on choosing the correct output.  
“Weak Signal”  
appears  
• This OSD appears when the digital channel that you have selected is too weak to receive or  
no signal is being detected for that channel.  
“No Program”  
appears  
• It appears when that channel is not receiving a signal and you have the Noise Muting  
function OFF and you have a single screen. It moves automatically every two seconds to  
prevent the screen from burn-in.  
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off  
functions that you set, are still active.  
• If you are watching an analog channel, NO PROGRAM does not appear.  
The following are not malfunctions.  
• The television may make a creaking sound if the temperature of the room or the temperature  
of the inside of the television changes. If there is no problem with the screen or sound, then  
there is no need to worry.  
• The picture may be temporarily disturbed and noise may be seen on the screen if the power  
is turned on immediately after it has been turned off. This is not a malfunction.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specications  
LT-42X579  
LT-42EM59  
LT-47X579  
LT-47EM59  
Model  
Type  
LCD Flat Television  
Reception Format  
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 at ATSC,  
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable  
Reception Range  
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper and Ultra bands  
(191 channel frequency synthesizer system) at Analog  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers)  
is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
Power Consumption  
247W  
274W  
42 inch / 106.7 cm  
measured diagonally,  
16:9 ratio  
47 inch / 119.4 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
4 x 16cm Oblique x 2  
Antenna Terminal  
(VHF/UHF,  
75 ohms (VHF/UHF)(F-type connector)  
ATSC/DIGITAL  
CABLE IN)  
480i  
S (Input 4)  
Input 4, 5  
Terminal  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
Input 4, 5 Terminal  
1080i / 720p / 480p / 480i  
(Component Terminal)  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p 75 ohms  
Video: 1080p / 1080i / 720p / 480p / 480i  
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit  
Input 1, 2, 3 Terminal  
(HDMI Input Terminal)  
Audio Output Jacks  
(FIX)  
FIX : 500mVrms (-4dBs), Low Impedance  
Optical Output  
Digital Audio  
Digital Out (optical) x 1  
40 x 29 x 11 3/4  
(with stand)  
1014 x 733.7 x 296  
(with stand)  
44 3/8 x 31 1/2 x 11 3/4  
(with stand)  
1127 x 799.7 x 296  
(with stand)  
Dimensions (inch/mm)  
W X H X D  
40 x 26 3/4 x 4 3/4  
(without stand)  
44 3/8 x 29 3/8 x 4 3/4  
(without stand)  
1014 x 677.2 x 117.8  
(without stand)  
1127 x 743.2 x 117.8  
(without stand)  
56.1 / 25.5 (with stand)  
63.1 / 28.7 (with stand)  
Weight (lbs / kg)  
51.7 / 23.5 (without stand)  
58.7 / 26.7 (without stand)  
Specifications subject to change without notice.  
• The open source software is embedded in this product. For more information, please go to:  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC Loves the Earth  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Integra Stereo Amplifier DTA 701 User Manual
Jacuzzi Hot Tub U961000G User Manual
JBL Professional Speaker SF12Mi User Manual
Jenn Air Trash Compactor TC507B User Manual
John Lewis Oven JLBIDO911 User Manual
JVC Camcorder GR AXM2 User Manual
JVC Computer Monitor TM A210G User Manual
Kenmore Dishwasher 6651379 User Manual
Kenmore Sewing Machine 385115418 User Manual
Kodak Radio 1H9659 User Manual